CJ11

CJ11

Grounding of electricity

This picture shows that there are three point which are L1, L2, Ground. In case of this electricity value is about AC230V

L1

AC236.3V

Ground (earth)

L2

#. This procedure is for defining of L1 and L2 and Ground.

CJ11

CJ11

CJ11

CJ11

#. Letâ&#x20AC;&#x2122;s check out L1 & Ground first. This picture shows that there are AC111.4 Voltage value between L1 & Ground. It means that it is not connected each other. If L1 & G were connected, it will be showing 0V.

L1 AC111.4V Ground (earth)

L2

CJ11

CJ11

CJ11

CJ11

#. Letâ&#x20AC;&#x2122;s check out next point.

This picture shows that there are AC155.87Voltage value between L2 & Ground. It means that it is not connected each other. If L2 & G were connected to the Ground, it will be showing 0V.

L1

Ground (earth) AC155.8V L2

And what is the exactly value?

CJ11

CJ11

CJ11

CJ11

If L2 was connected to the Ground, the voltage of L2 & G should be 0V. Because, L2 = Ground(0V)

L1

Ground (earth) AC 0 V L2

This is the grounding.

Besides, the voltage of L1 & G should be 230V.

L1 AC 230 V Ground (earth)

L2 This connection called the grounding.

And the voltage of L1 & L2 should be 230V. Because, L2 & Ground were connected each other. ( L2 = Ground )

L1

AC 230 V

Ground (earth)

L2

CJ11

The grounding

CJ11

CJ11

CJ11

The left side is the three-phase four-wire system from electric power corporation. And right side is 2nd Single phase transformer.

L1

L2

Ground (earth)

Generally, L2 is connected to the Ground in the 2nd Single phase transformer. Therefore, L2 and Ground should be 0V value.

If the electricity was from the three-phase four-wire system directly, Generally, L1 is selected among the R or S or T and N is L2

L1

L2

Therefore, R & N = S&N = T&N

CJ11

CJ11

Antilax grounding of electricity
Antilax grounding of electricity