Page 1

Tungsten Carbide Hardfacing Electrode that Resists 2-Body Abrasion and Erosion

Ultimium N112 ®

WELDING • Provides superior abrasion and erosion resistance on ALL weldable steels • Achieves full through wear resistance in a single pass • Deposit hardness attained with a high percentage of sintered tungsten carbides



Ultimium N112 is a sintered tungsten carbide electrode that deposits relatively smooth weld beads and is easily handled. This versatile product can be used to hardface all weldable steels and cast irons. Ultimium N112 provides superior abrasion and erosion resistance throughout the weld deposit with a hardness of HRC 65.

Preparation: Clean the weld area and remove scale and oxide. For parts below 40°F or over 1“ thick, preheat to 150°F. Higher carbon steels require higher preheats (300°F - 500°F).

This versatile product can be used to hardface all weldable steels in the flat and horizontal positions.

TYPICAL APPLICATIONS: APPLICATIONS • Fly-ash Conveyors • Fan Blades • Pug Mill Knives • Dry Cement Pumps • Plastic Mixer Paddles • Tool and rotary drill bits • Muller Plows • Ash Plows • Ore Chutes

INDUSTRIES Thermal Power Plants Cement Works Raw Material Processing Cement Works Plastic Works Various Industries Iron and Steel Works Thermal Power Plants Mining

TECHNICAL DATA: Hardness as-deposited: Carbide Hardness (kg/mm2): Current & Polarity:

HRC 64-66 2000 or RA 89-91 AC or DCEP(+)

Availability and Recommended Amperages Diameters:

3/16" - 4.8mm

Amperage Range:

120 - 200

Technique: Maintain a medium to short arc. The electrode should be inclined at a 45° angle in the direction of travel. Weld using stringers or weaving. Be advised that weaving more than 2x the electrode diameter is not advised as it may overheat the base metal and degrade weld deposit wear properties. Prior to extinguishing the arc, back whip the craters to reduce crater cracking. Thoroughly remove slag at the weld deposit toes. Wear Patterns: Selecting an optimum wear pattern can reduce overall costs and welding time. A few common patterns include this shown below... Fast Stripe --- --- --- ----- --- ----- --- --- ----- --- ---

Quick Dot · · · · · · · · · · · · · · · · · · · · · ·

Hearing bone \ \ \ \ \ \ / / / / / / \ \ \ \ \ \ / / / / / /

Speed Dash = = = = = = = = = = = = = = = = = =

Post-Welding: Slow cool parts in still air. High carbon steels and air hardenable steels should be covered with a heat retardant blanket.

YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542

Eutectic Canada 428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793

Eutectic Mexico KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail:

Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. N112-05-16-12© 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.