Page 1

Hardbanding For Oil and Gas drilling

12Ti 13CF 16XS Optimized Performance

10SS

• Crack Free Design • Casing Friendly • Optimized Tool Wear Resistance • Flexible Rebuild Design


13CF 16XS 10SS

Description:

OTW 16XS Extreme Service is a product ideally suited for drilling in the most demanding ERD and Ultra ERD wells. The unique nature of these wells puts severe stress on the drill string, prompting the industry to respond with High performance Tool Joint Connections (XT™, VX™, TT™). These connections produce higher torque values with lower drag and wall thickness. This requires increased reinforcement through optimized hardbanding solutions, resulting in heightened structural integrity and minimal dilution, while still providing effective overall durability. OTW 16XS was specifically designed for use in Ultra Deepwater applications, where most wells are highly deviated and extremely deep. As these wells require the highest level of strength and prolonged performance, OTW 16XS not only contains superior casing friendly properties, but also demonstrates a unique ability to offer the best wear-resistant materials in both open hole and cased hole environments. Providing the highest casing & open hole wear resistance, OTW 16XS contains a uniquely weighted mix of multicarbides (Cr, Ti, Mo, and W), which is dispersed uniformly throughout a tempered martensitic micro-structure. This creates superior thickness and anti-wear properties, which maximize wear resistance, strength and longevity. OTW 16XS is also able to be cost-effectively reapplied over itself and most standard, non-cracking wires for drill pipe refurbishment and reinstatement.

Overview: • • • • •

Advanced coating chemistry and microstructure Very Casing friendly Acknowledged hardbanding alloy in Ultra deep water drilling Excelent open hole resistance Ideal for multiple layer applications OTW 16XS hardbanding alloy applied on a tool-joint

(%)

Mohr T95 Casing Wear (%)

(gram loss)

14

ASTM G65 Abrasion Wear Test Procedure “A”

0.45 0.4

12

0.35

10

0.3

8

0.25 0.15

4

*

*

0.2

6

0.1 2

0.05

0

S-135 TJ-steel OTW 16XS

*

Product A

Product B

Product C

Product D

0 12Ti

OTW 16XS Product A Product B

13CF

*

Product C Product D

Product A - Cracking type alloy, Product B & C - designed to be crack free, Product D - suspected cracking

16XS

Castolin_Flyer_OTW_16XS_hardbanding_oil_gas_industry%281%29  

http://dev6.castolin.com/sites/default/files/jobs/downloads/Castolin_Flyer_OTW_16XS_hardbanding_oil_gas_industry%281%29.pdf