Page 1

May 2011 Catalog

BUILD YOUR OWN ADIRONDACK CHAIRS! • Single, Double, or Child's Chairs • Simple, Easy Summer Projects • Step-By-Step Instructions • Plan Specific Hardware Kits See Page 2 For Details

15% Off May 13 & 14! See Page 166 For Details!

Build This Adjustable 3-in-1 Assembly Table! Woodcraft® magazine Paper Plan #149864 • Made from two 3/4"-thick sheets

of MDF and maple trim

• Provides assembly surfaces

in three sizes • Largest measuring 36 × 51" when both drop leaves are raised 149864 .............................. $12.99

Sale prices good April 30 through May 28, 2011

FREE

140-Piece Square Drive Screw Sampler With A $65 Purchase!* $1999 Value!

*Exclusions apply – see page 2 for details.

+ SAVE 50% On 10-Piece Forstner Bit Sets, pg. 153 + SAVE 25% On Dust Extraction fittngs, pg. 154

+ Blade Runner w/FREE Wall Mount $179.99, pg. 2E + SAVE 20% On Exotic Woods, pg. 2F


New Products QUICK INDEX

Complete Index on page 165 Description....................................................Page

Woodcraft® magazine Adirondack Chair Plan

The Adirondack chair is an American icon that evokes images of lazy summer days at the lake or seashore. This Woodcraft® magazine Classic® Project Plan takes you step by step through the construction process using detailed instructions, 11 “close up” construction photographs, an exploded view illustration, bill of materials and cut list. Full size patterns are included for easy transfer of chair parts to your material, or create pattern routing templates. This is a perfect weekend project that any woodworker will enjoy building…..and using! The Adirondack hardware kit below contains all the carriage bolts, bolts, nuts, washers and screws necessary for Woodcraft® magazine plan. 149235 ......................................................$12.99 153018 Woodcraft® magazine Adirondack ........ hardware kit................................... $9.99 830818 Snappy 3/8" plug cutter...............$13.99 830819 Snappy 1/2" plug cutter...............$16.99 143766 18" x 24" transfer paper, 6 pcs....$8.95

All New Products.......................2-2H, 152-162, 166 Books..................................................2G, 90, 91, 134 Carving..........................2C, 2G, 87, 91-102, 107, 158 Chisels..........................2B, 2C, 6, 25, 65, 66-67, 103 Clock Supplies..................................... 131-133, 153 Dust Collection...2E, 3, 5, 6-10, 12-14, 15, 20, 154 Fasteners....................... 57, 58, 123, 130, 131, 152 Files & Rasps.........................................88, 106-107 Finishing...................... 2D, 113-118, 119, 156-158 Glue.............. 2D, 110, 111-112, 113, 146, 155, 157 Hardware.......................................22, 119-129, 152 Marking & Measuring.................................................. ................................ 2C, 2E, 18, 69, 127, 78-82, 155 Ordering Infomation.............................................163 Order Form............................................................ 164 Pen Kits........................................ 137-145, 160, 161 Picture Framing...................................................... 43 Planes............................................2B, 62, 63-64, 65 Pneumatics..................................11, 156, 158, 166 Power Carving................. 2G, 8, 102, 103-105, 158 Power Tool Accessories........... 2A, 2E, 2H, 3-11, 16, 17-27, 43, 44, 81, 82, 152, 153, 156, 158, 162, 166 Power Tools ................................................................. 2A, 2E, 2H, 3-10, 82, 102, 118, 156, 158, 162, 166 Project Supplies........................................................... ......................2E, 118, 134-136, 155, 157, 159-161 Router Accessories .................................................... .............2G, 2H, 7, 8, 10, 16, 19, 22, 27, 28-32, 153 Router Bits........2H, 8, 29, 32, 33, 34-38, 136, 166 Safety............. 2D, 15-16, 17, 21, 73, 101, 113, 154 Saws ............................ 4, 8, 50, 51-54, 65, 68, 152 Scraping & Sanding .72, 73, 101, 107, 108-110, 155 Sharpening .......... 2A, 2C, 25, 82, 83-90, 108, 158 Sharpening Service................................................ 89 Shop Accessories.......................... 2D, 2E, 2H, 5, 16, 23, 26, 27, 38, 39-42, 119, 152, 153, 155, 157, 158 Timber Framing................................................ 65, 66 Vises & Clamps............................................................ ..................... 43-47, 48, 57, 58, 144, 146, 152, 158 Wood............ 2F, 2G, 134, 135, 143, 146-151, 160 Woodboring..................6, 25, 55-62, 127, 129, 153 Woodturning .2D, 2F, 69-77, 135-145, 153, 159-162 Workbenches...................................... 2D, 26, 48-50

Children’s Adirondack Chair Plans & Templates

Making a Child’s Adirondack chair has never been easier! This kit has the plans and the templates in one package. Trace out the pieces, roughcut them, then trim to final dimensions with a router and flush-trim bit. Assemble and finish your chair according to the plans. Materials and toys not included. Hardware kit below contains carriage bolts, washers, nuts and screws needed for assembly of the child's adirondack. 848908 ........................................................$24.99 153018 child's hardware kit........................ $9.99

FREE 140-Piece Square Drive

Screw Sampler With A $65 Purchase!* $1999 Value! *Exclusions apply – see page 2 details.

Adirondack Plan Value Pack

Build a single or double Adirondack, as well as an Adirondack foot rest. This value pack includes a separate plan for each piece, with fullsized patterns for all curved pieces. Hardware kit contains bolts, washers and hinges only. Screws must be purchased separately. 149771 • reg. $17.99 152183 • hardware kit $19.99

Offer Good 4/30/11 - 5/28/11. To Redeem: Bring this coupon in to any Woodcraft store. Coupon is required for redemption and must be surrendered at time of purchase. HIGHPOINT XT® Square Drive Screw Sampler (152761) FREE With A $65 Purchase. This Coupon Cannot Be Used With The Purchase Of Any Product Featured In This Sales Flier. One Time Use Off Your Total Purchase Of Regularly Priced Merchandise. Minimum $65 Purchase Required Before Tax. One Per Customer. Valid In Retail Stores Only. No Cash Value. Offer Cannot Be Combined With Any Other Coupon Or Discount Offers. Excludes All SawStop & FESTOOL Products, LEIGH Jigs, Dowelmax Products & Gift Cards. Coupon Code: 50211

Technical Advice: Call Toll-Free 800 535-4486 tech@woodcraft.com

Satisfaction Guaranteed – We Promise!

We’re absolutely confident that you’ll be satisfied with your purchase from Woodcraft! If you’re not, return it anytime within 90 days, and we will gladly replace the product, give you credit, or refund your money, whichever you prefer. Woodcraft’s Guarantee does not apply to power tools, which are subject only to manufacturer’s warranties. Special-order items or manufacturer drop-ships are subject to a 25% restocking fee.

Orders: Call Toll-Free 800 225-1153

Operators are on hand Monday through Friday from 8AM to 12 Midnight and 8:30AM to 5PM on weekends. Please complete the order form enclosed in this book and have your credit card handy before you call. Visit us online for Canadian pricing including duties and taxes.

2

If you need more information on any of the tools that Woodcraft sells, give our technical staff a call. If they can't find a solution, they'll go right to the manufacturer for the answer. Please call Monday through Friday from 8:30AM to 9PM EST.

Customer Service: Call Toll-Free 800 535-4482 custserv@woodcraft.com

Our Customer Service Representatives can help you with any questions you may have regarding your order. Please call Monday through Friday from 8:30AM to 5PM EST. If possible, please have your order number for reference. © 2011 Woodcraft Supply, LLC. “Helping You Make Wood Work” is a trademark of Woodcraft Supply, LLC. Printed in the USA. Retail store pricing and promotions may vary from catalog. Sale prices good April 30 through May 28, 2011, unless otherwise noted. Not responsible for typographzical, photo or print errors.

Credit Card Orders: 800 225-1153

Visit Your Local Woodcraft Store!

Cover Images: Jim Osborn www.osborn-photo.com

$1499

Everything in our catalog and more! • Classes & Demos • Stores Nationwide • Expanded Product Lines • Lumber

Visit Woodcraft On The Web!

E L P

M A S

www.woodcraft.com Features: •New Products •Closeouts •Contest Info •Specials •Gift Finder •Online Videos See www.woodcraft.com for the Woodcraft Store nearest you

Free Technical Advice: 800 535-4486 www.woodcraft.com


New Products Products New

The Imperial Blade company is committed to producing high quality products that are made in the USA! Imperial blades offer woodworkers a selection of blades and accessory attachments for the industry's most popular multi-tools. The Imperial blades fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool.

(A) IMPERIAL Fine-Tooth Wood Saw Blades

(E) IMPERIAL Flexible Scraper Blade

For use when cutting wood, drywall and plastic, the fine-tooth configuration is specifically designed for precision wood applications. They can be used for cutting under the kick plate when installing new kitchen flooring, undercutting door jambs or flush cutting tongue-and-groove. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. Model

152548 152549 847745 847747

MM120 MM110 MM100 MM150

TPI

Width Depth

Model

E

F

D

(F) IMPERIAL 11/4" Carbide Blade

G

The MM640 is suitable for grout, plaster and other like materials. The Flush Cut Carbide Grout Blade takes out damaged tile grout, and cuts grooves in plaster, porous concrete and similar construction materials. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 11/4" width, 1" depth. 847750 ........................................................$24.99

16 3/8" 15/8"...........$12.99 16 3/4" 15/8"...........$12.99 16 11/4" 15/8"...........$12.99 16 21/2" 15/8"...........$14.99

For use when cutting wood, drywall and plastic, the coarse-tooth saw blade has larger teeth for aggressive cutting. It is designed for cutting wood, drywall and other soft materials, but will cut through a few nails. Almost as fast as a reciprocating saw, they can be used for cutting under the kick plate when installing new kitchen flooring, undercutting door jambs or flush cutting tongue-and-groove. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. MM200 MM200 MM250 MM250

C

B

Each

(B) IMPERIAL Coarse-Tooth Wood Saw Blade

847746 847838 847748 847846

A

The MM510 is a mushroom-shaped flexible scraper that is ideal for cutting silicone and soft glazing compound as well as separation of insulating glass. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 152550 .......................................................... $9.99

TPI

Width Depth

Each

12 11/4" 15/8"...........$12.99 10-pack..........................$89.99 12 21/2" 15/8"...........$14.99 10-pack..........................$99.99

(G) IMPERIAL Diamond Blade

(D) IMPERIAL 3" HSS Segmented Saw Blade

The MM730 is suitable for all marble, epoxy resin and porcelain mortar grouts. The diamond blade will remove tough grout from between tiled surfaces without damaging the tile. The long lasting blade enables continuous work on large projects. This blade is tough enough for commercial applications such as cutting out marble and concrete joints or for sinking ducts in plaster, brick, pumice and honeycomb stone or autoclave aerated concrete. These premium, long lasting blades are designed specifically for harder grouts. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 30/40 Grit Mesh. 152552 ........................................................$59.99

The MM410 cuts wood, fiberglass, sheet metal, drywall, and plastic and is a high-speed steel flat saw blade that is segmented on one side. The high-speed steel material is rigid, allowing the blade to cut through harder wood and sheet metal up to 1mm thick as well as carbon fiber, fiberglass, and nails. With this segmented blade you can make cuts at right angles and not worry about over-cutting. Ideal for working in corners. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 31/8" diameter, 11/16" cutting depth. 152551 ....................................................... $34.99

(C) IMPERIAL Bi-Metal Saw Blade

IMPERIAL Variety Blades

For cutting sheet metal, aluminum, copper piping, wood, drywall and plastic, the universal Bi-Metal saw blade is made with the industry’s highest quality high-speed steel material. Comes with a 14-teeth per inch blade to cut wood and nails with ease. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. Model

TPI

Width Depth

848697 1 each of MM150, MM200, MM300...... ....................................................... $34.99 Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool are trademarks of their respective companies.

Each

847749 MM300 14 11/4" 15/8"...........$15.99 847847 3-pack........................................... $34.99 847848 10-pack....................................... $109.99

Includes Over $475 In Accessories! Quantities Are Limited

ENTER

To WIN

SHARPENING SWEEPSTAKES

WINNER RECEIVES:

$34999 Visit Your Local Woodcraft Store or woodcraft.com For Details!

148103 Tormek T-7 Water-Cooled Sharpening System 144269 Norton Waterstones, 4-pc. Set 149479 WoodRiver® Diamond Grinding Wheel 8" 120 Grit 150780 8" Slow-Speed Grinder

FEIN MultiMaster 250Q Limited Edition

Includes: FEIN MultiMaster FMM 250 Q, Triangular Sanding Pad, 5 Each Sanding Sheets 80, 120, 180 Grit; Universal E-Cut Saw Blade (13/4"), HSS Segment Saw Blade, Carbide-Tipped Segment Saw Blade, Rigid Scraping Blade; Dust Extraction Attachment; Perforated Triangular Sanding Pad, 5 Each Perforated Sanding Sheets 80, 120, 180 Grit; Carbide Rasp (Triangular, Perforated); 21/2" Wide Standard E-Cut Blade; Sanding Pad Kit; 13/8" M-Cut Saw Blade, Narrow Cut M-Cut Saw Blade And Tool Case. • High Performance 250-Watt Motor • Electronic Speed Control • Designed For Continuous Use • Oscillates 11,000-20,000 OPM • 8-Point Tool Mount For Outstanding Torque Transfer 152917 • reg. $349.99

Helping You Make Wood Work ®

2A


New Products

#3 #4

A WoodRiver® Adjustable Mouth Block Planes

#6

B

These WoodRiver® Block Planes are based on the venerable Stanley #65 low angle and #18 standard angle “Knuckle Cap” design, generally considered one of best block plane designs around. With the widely recognized comfortable chrome plated Knuckle Cap, these block planes look like the standard and low angle versions of yesteryear. Upon closer inspection you’ll notice changes to the base castings which not only strengthen historically weak points of the original design, but also improve the blade bedding area. Improved blade adjustment mechanisms allow for crisp, easy adjustment of the blades using the rear adjustment knob. The adjustable mouth is very smooth to operate and allows fine tuning of the mouth for work ranging from coarse to creating whisper thin shavings. The stress relieved ductile iron castings are precision machined, flat and square. Each plane is outfitted with a high carbon tool steel blade, which is hardened to RC58-63 for maximum edge retention and ground to a 25° bevel. We recommend sharpening the blades prior to use, however they’re impressively sharp right out of the box. The bed angles are 20° for the Standard and 12° for the Low Angle. 2" W x 7"L with 15/8" W, 0.125" thick blade. Mixed plane sets sold on p. 155. 151124 (A) 20° standard angle.............................................................................................................$89.99 151125 (B) 12° low angle......................................................................................................................$89.99 152764 Ultimate block plan kit, A & B above.................................................................$159.98 SAVE $20

WoodRiver® Side Rabbet Plane

Early side rabbet planes such as Stanley’s 98/99 were available in right- and left-hand versions. Combination planes like the Preston 1369 and Record 2506/2506S offered the convenience of two blades in a single plane. The WoodRiver® Side Rabbet Plane takes its linage from the 2506S and incorporates two manually adjusted blades and an adjustable depth stop. This handy tool is perfect for cleaning up rebates and grooves, ensuring a proper fit. The plane’s precisely machined body is manufactured from 40cr tool steel with a reversible, adjustable depth stop and features T10 steel blades hardened to RC59-63.The front of the plane is easily removable for conversion to a bull nose configuration for corners and stop dadoes. 151239 ........................................................$69.99

WoodRiver® Cranked Neck Chisel/Plane Set

This unique crossover design makes for an extremely useful tool. The offset handle permits the short chisel blade to glide along the surface like a plane removing excess dried glue with ease, cleaning out corners, trimming protruding dowels or pegs and who knows what else! Set includes 1 Bubinga handle and 4 interchangeable blades: Diamond Point, Straight, Left and Right Skew. Blades are 1" x 13/8" Mn65 Spring Steel hardened to RC56-60. 151240 ........................................................$39.99

2B

#5 WoodRiver® Ultimate V3 Bench Plane Set

WoodRiver® V3 Bench Planes are based on the classic, time-tested Bedrock design. The original Bedrock Planes have proven to be among the most enduring, collectable tools in all of woodworking, and for good reason—they work. WoodRiver® V3s are their modern equivalent. Although not faithful reproductions, they are inspired interpretations of these classics. The Ultimate V3 Set includes 4 planes— #3, #4, #5 and #6—each featuring heavy stress relieved ductile iron castings, precise machining and extra thick plane blades. Sold separately on p. 63. 152762 ...................................$549.96 SAVE $50

A B

#4

#6

WoodRiver® Chisel Planes

WoodRiver® Ultimate Cabinetmaker’s Kit

The WoodRiver® Ultimate Cabinetmaker’s Kit includes the three planes cabinetmakers prefer: the WoodRiver V3 #4 plane for smoothing, the WoodRiver® V3 #6 Foreplane for joining work, and the WoodRiver® Low Angle Block Plane for trimming end grain and doing on the spot trimming. The WoodRiver® V3 Bench Planes are based on the classic, time-tested Bedrock design while the WoodRiver® Block Planes trace their ancestry back to Stanley’s #65 and #18 “knuckle cap” block planes. Neither designs are faithful reproductions, but rather inspired interpretations of classics. All feature heavy stress relieved ductile iron castings, precise machining and extra thick blades. The resulting tools offer extraordinary performance and unsurpassed value. 152763 ...................................$369.96 SAVE $40

Think of a chisel plane as a chisel perched atop a wedge to control the angle and edge in front and a depth adjustment to control the cut. This simple idea has many practical applications from removing excess glue to trimming proud dowels and pocket hole plugs. Available in both a small and large version, WoodRiver Chisel Planes will be a welcomed addition to your tool chest. The small chisel plane is 41/2" long (5" OAL) by 13/4" wide and weights 11/2 lbs. The large chisel plane is 91/2" long by 21/4" wide and a hefty 31/2 lbs. Both feature stainless steel investment cast bodies and Mn65 steel blades. 151301 (A) small........................................ $59.99 151302 (B) large....................................... $129.99

WoodRiver® Spokeshave WoodRiver® Max Awl

Awls make holes, usually to start screws in wood or push thread or lace through leather. The WoodRiver® Max Awl is an elegant, beautiful interpretation of this age-old tool. Overall tool length is approximately 5". The base of the 3" shank is 5/8" in diameter and tapers to a fine point at the tip. 151300 ........................................................$19.99

Credit Card Orders: 800 225-1153

Spokeshaves are used to shape and smooth chair legs, wheel spokes and rods of all sorts. The WoodRiver® shave is a robust casting of ductile iron featuring a high carbon RC60-64 blade and an adjustable front shoe to control the depth of cut. The heavy (1.05 lbs) cast iron body actually increases tool control, making it easier to shave with one or two hands. This, combined with the adjustable shoe for depth control will make this one of your favorite hand tools. 150740 ........................................................$49.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


New Products

Save

20%

STANLEY Sweetheart 750 Socket Chisels

Returning to their traditional roots, Stanley’s new 750 socket chisels are forged from high chrome-high carbon English tool steel in the famous steel city of Sheffield and hardened to RC58-62. FSC Certified Genuine English Hornbeam (a member of the Carpinus genus) is used for the handles. Chisels range in length from 81/2" to 103/4". Handles are approximately 47/16" in total length, with a 35/16" comfortably shaped grip area and a 11/8" tenon which fits into the socket on the chisel. Handles must be set in the socket prior to use. Like all chisels, these will require some flattening of the backs and honing before use, but we found them well-balanced and quite light. We all liked them so much we think these could easily become our favorite set of chisels. Sets come with soft leather tool rolls for storage, which can also be hung up for easy access to tools when in use. 152810 1/8"................................................. $31.99 152811 1/4"................................................. $32.99 152812 3/8"................................................. $33.99 152813 1/2"................................................. $34.99 152814 5/8"................................................. $35.99 152815 3/4"................................................. $36.99 152816 1"................................................... $38.99 152817 11/4"................................................$39.99 152818 4-pc. w/tool roll.......................... $129.99 152819 8-pc. w/tool roll (shown)............ $229.99

FLEXCUT™ Wide Palm Tool Sets

$11599

Flexcut™ 6-Piece Mallet Set

• Made With Flexcut’s High-Quality Spring Steel • Tempered To A Hardness Of RC 59-61 • Fitted With Octagonal Ash Handles That Can Be Driven By Hand Or With A Mallet • Includes: 3/8" x 60° V-Tool, #11 x 1/4" Sweep, #10 x 9/16" Sweep, #7 x 7/16" Sweep, #5 x 11/16" Sweep, And A #3 x 1" Sweep 151122 • reg. $144.99

As suited to smaller projects (and precision work) as to roughing out blanks, these 5" tools fit comfortably in the palm of your hand. Flexcut blades, as the name implies, are flexible to give you more control over your cuts. Made of high carbon spring steel, the tool shank gives just enough to follow the contour of carving, eliminating the need to have a handful of traditional tools to finish a single profile. This unique material also contributes to its excellent edge holding capability as the shank is tempered like a spring while the tip is hardened to Rc 59-61, then hand honed and polished. The handles are ergonomically designed to increase the comfort and ease of use. Each tool is pre-sharpened and ready to use. 4-Piece Palm Set Includes: #3 x 5/8" sweep, #5 x 9/16" sweep, #8 x 3/8" sweep, and a 3/8" 70° V-tool. 140236 ........................................................$59.99 9-Piece Palm Set Includes: #11 x 1/8" sweep, #3 x 3/8" sweep, #3 x 5/ " sweep, #5 x 9/ " sweep, #6 x 5/ " sweep, #8 x 8 16 16 3/ " sweep, 1/ " 70° V-tool, 3/ " 70° V-tool, #2 x 5/ " 8 4 8 16 double bevel skew. 815235 ..................................................... $129.99

FLEXCUT™ 3-Piece Knife Starter Set

Made from Flexcut’s high quality spring steel, tempered to a hardness of Rc 59-61, and fitted with comfortable, ergonomic ash handles. Each tool approximately 61/2" in length and is pre-sharpened and ready to use. Set contains one each of; cutting knife, detail knife, and roughing knife. 151121 ........................................................$49.99 Closed

PFEIL Swiss Made Intermediate Set of 4 Tools

Open

Specially forged for Woodcraft, these intermediate sized, professional style tools are 2" shorter than our regular Swiss tools for easier control and greater responsiveness. These precise tempered high-grade steel tools are sharpened, honed and buffed for immediate use with an edge that will stay sharp for many enjoyable hours of woodcarving. These delicately balanced tools work well for getting into confined areas. The overall length is 8" with 31/2" blades and 41/2" octagonal hardwood handles. The tool set includes: 6mm #12 V-Parting Tool, 7mm No. 8 Gouge, #1 18mm Double Bevel Straight Chisel and a 36mm Chip Carving Knife. 05V21 ........................................................$89.99

$1499

PFEIL Swiss Made Marking Knife, Large

Save

$5

• K720 Steel Blade • 60° Ground Point • Left Or Right Handed • Round Bubinga Handle • Fits In The Hand Like A Pencil 05Z25 • reg. $19.99

WERA® Kraftform Kompakt 26 7-in-1 Bayonet Screwdriver

If you didn’t know better, you would think this screwdriver might have been issued by the British Secret Intelligence Service! The Kraftform Kompakt Bayonet Screwdriver is a convenient all-in-one tool combined with Wera’s quality and innovative design. Pressing the quick release ring extends the shaft for use; pressing the rear button opens the handle revealing storage for six different driver bits. The shaft incorporates a quick release locking chuck and spinner mechanism that can be removed for use in cordless drill drivers. Retracted length is less than 6". Includes 6 Wera “professional quality” insert style bits ( 2 SL, #1PH, #2PH, #1 SQ, #2SQ) and a durable nylon belt clip pouch. 845196 ........................................................$39.99

$999

Save

$450

23-Piece Hobby & Craft Tool Set

Large Assortment Of Knives, Blades, And Accessories 144553 • reg. $14.50

FLEXCUT™ Pocket Jack for Carvin'

Flexcut’s Pocket Jack is a smaller 4-blade version of the original Carvin' Jack. Its multi-tooled design caters to the specific needs of woodworkers and carvers alike. At 3 ounces and with a closed length of 41/4" you will hardly even notice it in your pocket. Pocket Jack includes the following blades: Detail Knife (15/8" long), straight gouge (17/8" long), scorp (11/16" long) and v-scorp (1" long). 151338 ........................................................$79.99

Helping You Make Wood Work ®

2C


New Products HoneRite Gold

HoneRite Gold is a universal grinding, honing and lapping additive that makes water non-corrosive. What? Water noncorrosive! HoneRite Gold changes the water not only making it noncorrosive but also deposits protection onto the steel in the form of water soluble corrosion inhibitors. Now, you don’t need copious quantities of paper towels and rust inhibitor after sharpening…just a quick dry off and you’re ready. Each 250ml bottle is a concentrate that makes over 6 quarts of “sharpening fluid.” Storing fluid in plastic containers when not in use will prevent fluid loss due to evaporation. HoneRite Gold is safe for use with all types of waterstones whether manmade or natural. 152586 ........................................................$24.99

BarrelBond 5-Minute Gel Glue, 2oz.

BarrelBond is the best pen turner’s glue we’ve used – ever. The two-part epoxy gel formulation is easy to mix and use, and the five-minute open time is enough to glue up multiple tubes. What else? It is gap filling, waterproof, flexible, easy to trim, easy to sand, non-sagging and has an unlimited shelf life. Our favorite features are the gap filling and flexibility, because when properly applied, these characteristics mean fewer pen blank “blowouts”. 152719 ........................................................$14.99

Getting sheet goods up onto your table saw can be a real pain in the back! With the Leg Up™ Panel-Lift you can perform this task quickly and safely since this tool uses leverage, not strength, to lift cumbersome sheet goods. The Leg Up™ mounts quickly and easily to the edge of your saw’s table or to the fence rail and you are ready to go. Simply place bottom of panel in the ‘hook’ and rotate or ‘flip’ the panel onto the table saw. Mounting hardware included. USA. 842599 ........................................................$49.99

Gorilla Gripper®

A 3MTM P100 Disposable Respirator

The 8293 P100 Disposable Respirator offers the highest level of NIOSH rated filtration efficiency in a maintenance-free respirator. Excellent for lead abatement, this respirator protects against substance specific regulated particles not including asbestos. It features a 3M™ Cool Flow™ Exhalation Valve, a face seal, adjustable nose clip, lightweight construction and an all filter design. Meets 42 CFR84. Individually bagged. 152794 ........................................................$12.99

Leg Up™

Inside/Outside Digital Calipers

B

Taking exact measurements of your turnings and other projects has never been so easy. Accurate to within +/- 0.01", these calipers feature spring-loaded jaws and an easy-to-read digital display screen. Measurements can be taken in millimeters, inches, or fractions. To maintain a specific measurement the blades can be locked down by tightening the thumbscrew. 847516 (A) outside digital caliper............ $34.99 847638 (B) inside digital caliper............... $34.99

Moving plywood, drywall or any sheet goods has just become easier. Simply slip Gorilla Gripper® over the center of the panel and lift. The leverage created by the weight of the panel and the unique jaws of the Gorilla Gripper® make it easy for one person to carry a panel. No more strained muscles or blindly bumping into everything in our shop! 842598 SAVE$ 5!........reg. $49.99 SALE: $44.99

ROCKWELL Jawstand

Need a second set of hands for your next project? You need the JawStand from Rockwell. This easy-to-use work support stand is ideal for holding, clamping, and feeding large work or sheets of materials. The JawStand comes fully assembled and ready for use, then, the stand folds up for quick. Low friction slide, marked height adjustment, swiveling head, fully assembled. 413419 ....................................................... $69.99

Briwax ChaiRX

Briwax ChaiRX is first aid for loose chair joints. Not too long ago, complete disassembly would have been required to fix a chair with loose joints. Not anymore! ChaiRX is injected into the joint via a small hole that you drill, and the thin unique formulation penetrates the wood cells, permanently swelling the joints and bonding them together. In just 12 hours, your chair will be wiggle free and ready for service. Each package contains 4 oz. of ChaiRX, a syringe and 3 needle tips. Complete instructions for application and cleanup are included. 152720 ........................................................$14.99

2D

The Bullzeye Woodturner’s Center Finder

Templates make tasks much easier, and this one is no exception. Made from durable 1/8" acrylic, with circles marked at 1/4" increments, The Bullzeye makes finding the most desirable turning area in irregular shapes quick and simple. Position the template on the wood, select the position that allows you to utilize the best figure and yield, and then, using an awl in the center hole, scribe a circle on the wood with a pen or pencil. Defects are easily avoided, or “character” areas can easily be included. Template will have a maximum yield of 10". 846243 ........................................................$14.99

Credit Card Orders: 800 225-1153

Perfect Match Stain Marker

Felt-tip markers are great for touch-ups, but if the color isn’t quite right you often have to settle for “close enough.” Say goodbye to close enough with the Perfect Match Stain Markers, which have no color in them out of the box. Instead, you load each marker with the exact stain you are using or with a customized color to create the perfect match. Not only are these markers easy to load and use, but they are also reloadable for multiple uses. One marker per package. 152587 ..........................................................$5.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


New Products

$17999

FREE Wall Mount – $4999 Value!* Rockwell BladeRunner

Portable, multipurpose precision cutter that utilizes any T-Shank jigsaw blade. The variable-speed motor control and simple blade changing mechanism allow you to cut wood, metal, plastic aluminum and ceramic tile. Includes: Wall mount bracket, miter gauge/rip fence, five T-Shank jigsaw blades and manual. 152581 Rockwell Blade Runner • $179.99 413684 Circle Cutter • $29.99 413685 Picture Frame Cutter • $29.99 *FREE Wall Mount With Purchase Of 152581.

FESTOOL CT Workcenter WCR 1000

The CT Workcenter provides a convenient way to keep your tools and accessories close at hand, without cluttering your valuable workspace. This unit can be mounted easily to all of Festool’s larger dust extractors like the CT22, CT26, CT33 and CT36. The Workcenter offers freedom of movement throughout the shop or jobsite. The CT Workcenter features numerous options for hanging an assortment of tools and accessories, plus height adjustable columns, allowing for easy storage of task-specific Systainers, keeping critical items within arm’s reach. Includes: Workcenter WCR 1000, rotary shelf, double hook, double tool rest hook, adjustable shelf, and (6) single prong hooks. Special Note: Does not mount to CT MINI or CT MIDI.

Dan Deulen created these simple sharpening jigs that make sharpening jointer and planer knives easy, cost-effective and fast. The key to the Deulen Sharpeners are the two brass blade holders, inset into the hardwood handle, that hold the blades securely and at the proper angle. With a blade in each track, it is a simple matter of holding the handle and rubbing the blades against an abrasive surface. We recommend Deulin’s PSA Abrasives pack which contains six abrasive strips in a progression of grits starting at 120 followed by 150, 180, 220, 320 and ending with 400 grit for final polishing. It couldn’t be easier, and the proof is performance. This is so easy to do, you’ll no longer put off sharpening your blades. Your machine won’t have to work as hard and the wood surface will be smoother with less tear-out. Have more than two blades? No problem! Dan has worked out a system of alternating the blades that takes just a little more time but yields the same fantastic results. Each sharpener comes with written instructions, a hex wrench and a short how-to video. Two sizes are available: 6" and 12" models. Abrasive paper pack sold separately. 152867 Deulen 6" Jig.................................$49.99 152868 Deulen 12" Jig...............................$89.99 152869 Deulen PSA Abrasive pack............$8.99

10 pieces packed into Festool’s new #1 T-LOC Systainer. Compatible with all Festool Dust Extractors. Includes: T-LOC Systainer, 36 mm Plastic curved hand tube, 36 mm Plastic extension tubes, 36 mm Plastic interchangeable floor nozzle, 36 mm Plastic crevice nozzle, and 36 mm Plastic upholstery nozzle. 497697 ........................................................ $77.00

FESTOOL RO 90 Multi-Mode Rotex Sander

Specs: Weight: 221/2 lbs. Overall length: 4111/32" Base plate length: 235/8" Width: 141/4" Min. height: 2115/32" Max. height: 3029/32 498507 ..................................................... $375.00

Handi-Shim

DEULEN Jointer/Planer Knife Sharpening Jigs

FESTOOL Compact Cleaning Set with T-LOC

Nifty color coded plastic shims in four specific sizes for use anywhere a shim or spacing is needed such as leveling door frames, window frames and kitchen cabinets or to set spacing such as the distance between ceramic tiles. You can even carry them around with you to level annoying restaurant tables. Our 40-piece assortment has 10 of each of the following thicknesses: 1/32", 1/16", 1/ " and 1/ " or (in order) green, red, white and blue. 8 4 149801 ..........................................................$5.99

Save

50%

GRÖZ Stainless Steel Cabinetmaker’s Rule

• Made Of Hardened Stainless Steel • Deeply Engraved Graduations • Finest Graduations Are In 64ths And .5mm • Rear Face Displays Inch To Metric And Fraction To Decimal Conversion Table 140655 6".................... reg. $3.99. SALE: $1.99 140656 12".................. reg. $8.99. SALE: $4.49 140659 24"................ reg. $14.50. SALE: $7.25 140657 40"............... reg. $25.50. SALE: $12.75

The RO 90 DX could easily become the most versatile tool in your shop. Equipped with 1/ horsepower, the RO 90 is prepared to tackle nearly 2 any sanding task. Easily switch between three different sanding modes with the flip of a dial for aggressive sanding, finish sanding and delta sanding. Switch from circular pad to delta-shaped pad in seconds with no tools required. The lightweight, ergonomic design makes sanding, even overhead, effortless. Includes: New SYS 2 T-LOC Systainer, StickFix Soft Round Sanding Pad, StickFix V93 Delta Sanding Pad, Edge Protector, Plug-It Power Cord, Abrasives Sample Pack and instruction manual. 571823 ..................................................... $375.00 497687 T-LOC Abrasive Systainer............ $65.00

SketchUp For Woodworkers DVD

SketchUp is a 3-D modeling program available as a free download from Google. Bob Lang, an avid woodworker and SketchUp expert, has created a DVD set, SketchUp for Woodworkers Part 1: Getting Started and Part 2: Advanced Techniques, that provides step-by-step instructions for using SketchUp from a woodworker’s perspective. With Bob’s guidance and easy-to-follow instructions, you learn to set the parameters in SketchUp to optimize the program for woodworking and how to take advantage of the speed and accuracy of this time-saving modeling software. 848090 DVD Part 1: Getting Started........$29.95 848091 DVD Part 2: Adv. Techniques.......$29.95

It's Easy To Get To Woodcraft

Call, Click, or Walk-in

800 225-1153 www.woodcraft.com

Helping You Make Wood Work ®

2E


New Products

Save

$5

Save

East Indian Rosewood

20%

(Dalbergia latifolia) An Excellent Turning Wood Featuring PurpleBrown Heartwood With Beautiful Figuring Of Darker Streaks Reg. SALE: 838052 1.5" x 1.5" x 12".............. $4.50 . $3.60 841877 1.5" x 1.5" x 18" ............. $6.99 . $5.59 838053 2" x 2" x 12"..................... $8.99 . $7.19 841746 2" x 2" x 18"................... $13.99 .$11.19 131571 2" x 6" x 6"..................... $14.99 . $11.99

Save

Complete a custom exotic hardwood cutting board approximately 113/4" x 12" x 11/2". This fantastic assortment will ensure no two cutting boards are the same. Surfaced and ready for glue-up. 152835 • reg. $24.99

red background of redheart is host to a number of very interesting streaks and closed knots. It is smooth and tight grained, and sands to a nice workable surface. Mexico/Central America. Reg. SALE: 152792 1.5" x 1.5" x 3"...................$1.99 . $1.59 838089 1.5" x 1.5" x 6" ................. $3.50 . $2.80 838090 1.5" x 1.5" x 12"................ $5.50 . $4.40 06A36 2" x 2" x 12"...................... $9.50 . $7.60 07A12 2" x 6" x 6"...................... $19.99 . $15.99 838499 3" x 3" x 12".................... $28.99 .$23.19

Cutting Board Kit

Tineo

Tamboti

(Spirostachys Africana) It is a rare wood with figure that is molted and banded, sometimes with visible growth rings. A hard, dense wood, it is lustrous and has a powerful but pleasant scent that is sweeter than sandalwood. This is one of the more beautiful African woods and is used mostly for carving, turnings and luxury furniture. Swaziland. 847340 11/2" x 11/2" x 3"...............................$2.50 841480 11/2" x 11/2" x 6"...............................$4.50 838095 11/2" x 11/2" x 12".............................$8.50 841822 11/2" x 11/2" x 18"...........................$16.99 838096 2" x 2" x 12"...................................$14.99

Argentinean Osage Orange

(Maclura tinctoria) Unlike the common domestic Osage (Maclura pomifera) which darkens considerably with age, this Argentinean species tends to keep its deep golden orange color. The heartwood is accentuated by bands of darker and lighter grain. This wood is heavy, hard, dense and stable, yet turns well and polishes to a deep luster. 838057 11/2" x 11/2" x 12"..........................$4.99 841807 11/2" x 11/2" x 18".......................... $7.25 847322 11/2" x 11/2" x 24"........................... $9.99 838059 2" x 2" x 12"................................... $8.79 841878 2" x 2" x 18".................................$12.99 842801 2" x 2" x 24"..................................$17.75 838061 2" x 4" x 4".....................................$6.59 838062 2" x 5" x 5"..................................... $9.99 838063 2" x 6" x 6"...................................$13.99 838060 3" x 3" x 12".................................$19.99 150702 3" x 5" x 5"...................................$12.99 838214 3" x 6" x 6"...................................$19.99

2F

20%

$1999

(Weinmannia) This unique wood from Chile has golden sapwood when first milled that darkens to a rich American cherry within a month or two. Heartwood is strikingly beautiful with a bluish-black variegated stripe through pinkish-red. Tineo has been used to make Steinway pianos and the interior of high-end sports cars. 152750 3/4" x 3/4" x 5" (5-pc.) ....................$10.99 152746 1 x 11/2" x 12".................................. $9.99 152747 2" x 2" x 12"...................................$14.99 152748 2" x 6" x 6".....................................$20.99

Baltic Birch Plywood

Baltic Birch, aka 'Russian Birch', is a popular panel best known for its light color, strength, multi-ply construction, and affordable cost. Our sheets are graded as B/BB (or 3-B) and is the very best grade available. This means that one face, B, will be a whole natural wood surface, no splices, have no patches (plugs that are used to cover defects) but may contain knot pattern or mineral streaks. Suitable for staining or painting. The other face, BB, and the inner plies will contain patches and tight, and not so tight knots. The best grades of Baltic birch plywood offer the quality necessary for the construction of fine cabinetry. In addition, Baltic Birch Plywood is an excellent material for drawer sides and bottoms, skateboards, as well as jigs and fixtures, and scroll saw work. 131138 1/8" (3mm) x 12" x 12".....................$1.50 131405 1/8" (3mm) x 12" x 30".....................$4.99 131400 1/8" (3mm) x 24" x 30"..................... $7.50 152980 1/8" (3mm) x 30" x 48"...................$14.99 131139 1/4" (6mm) x 12" x 12".....................$1.99 131406 1/4" (6mm) x 12" x 30".....................$5.99 131401 1/4" (6mm) x 24" x 30".....................$8.99 152979 1/4" (6mm) x 30" x 48".................. $18.99 131140 3/8" (9mm) x 12" x 12"....................$2.99 131407 3/8" (9mm) x 12" x 30".................... $7.99 131402 3/8" (9mm) x 24" x 30".................. $11.99 152978 3/8" (9mm) x 30" x 48"..................$23.99 131141 1/2" (12mm) x 12" x 12"...................$3.99 131408 1/2" (12mm) x 12" x 30"...................$8.99 131403 1/2" (12mm) x 24" x 30".................$14.99 152977 1/2" (12mm) x 30" x 48".................$29.99 131409 3/4" (18mm) x 12" x 30"................$13.99 131404 3/4" (18mm) x 24" x 30"................$19.99 152976 3/4" (18mm) x 30" x 48"................$39.99

Credit Card Orders: 800 225-1153

Redheart (Erythroxylon mexicanum) The bright

A Figured Maple Billets

B

These kiln dried billets are surfaced two sides and range in size from 7-11" wide, 22-28" long and 9/4 to 10/4 (21/4" to 21/2") thick. Figured Maple is prized for its beauty. The “figure” can be quilted, flame, tiger, curly or fiddleback. These special pieces of wood are frequently used in the manufacturer of musical instruments. Our billets come from one of the leading suppliers of music grade wood to luthiers around the globe. These billets, while excellent examples of figured maple, have a minor defect—either a discoloration or minor pin knot that does not allow them to be graded instrument quality. 152788 (A) flame.........................................$49.99 152789 (B) quilted......................................$69.99

Yucatan Rosewood

(Dalbergia yucatensis) Yucatan Rosewood is a hard, light-reddish cinnamon brown wood with darker-reddish brown stripes from the regions of Central and South America. It turns well and has fewer allergenic properties than other Dalbergia, such as Cocobolo and Honduras Rosewood. Commonly used in the region for furniture, musical instruments, and sports equipment. 152890 11/2" x 11/2" x 3"...................... New $1.99 844924 11/2" x 11/2" x 6"...................... New $2.99 149788 11/2" x 11/2" x 12".............................$5.50 843943 11/2" x 11/2" x 18".....................New $7.99 847341 11/2" x 11/2" x 24”................... New $8.99 149789 2" x 2" x 12"..................................... $9.99 841825 2" x 2" x 24".......................... New $16.99 150918 1/8" x 3" x 24".................................$13.50 150919 1/4" x 3" x 24".................................$13.99 150920 3/8" x 3" x 24".................................$14.50 150921 1/2" x 3" x 24".................................$15.99 150922 3/4" x 3" x 24"................................. $17.50 841827 2" x 5" x 5"............................... New $9.99 846029 2" x 6" x 6"............................New $12.99 842035 3" x 3" x 12"...................................$18.69 149791 3" x 5" x 5"......................................$13.99 843030 3" x 6" x 6".................................... $18.99 842635 3" x 8" x 8".....................................$29.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


New Products

In the Workshop with Charles Neil Cases & Bases DVD

Tasmanian Blackwood

(Acacia melanoxylon) Tasmanian Blackwood is also known as Australian Blackwood, Sally Wattle, Lightwood and Mudgerabah. Blackwood timber color ranges from a very pale honey color to a dark chocolate with steaks of red. It is very similar in its properties, color and figure to Hawaiian Koa. Very popular with luthiers, it is an excellent wood for turning, instruments and furniture. Tasmania. 152833 2" x 2" x 12".....................................$8.99 152834 2" x 4" x 4".......................................$8.99 152832 3" x 3" x 12"...................................$19.99

Snakewood

(Piratinera guianensis) Snakewood can be challenging to work, but it turns exceptionally well. When polished, it is one of the most beautiful species of hardwood. The heartwood is a dark red or reddish brown with conspicuous, irregular black speckles or stripes resembling skins of certain snakes. Grain is typically straight. South America. 123669 3/4" x 3/4" x 5" (shown).................. $11.99 123668 1" x 1" x 12"....................................$29.99 152891 1" x 11/2" x 5".................................$29.99

In this DVD series, Charles covers all the different techniques he’s used to build various styles of cases, including kitchen cabinetry. From dealing with expansion and contraction, to building super strong cases, attaching cross-grain moldings, or showing super easy ways of making drawer guides and internal construction there is something here for all. Includes installation of feet and bases, shaping the ever elusive bottom cases of the bombe, installing crowns and many other techniques for the building and constructing of cases in a most simplistic manner. Over 9 hours of excellent instruction. 151208 ........................................................$89.95

Machine And Hand Joinery Even after several thousand years, dovetails are still being used today to fasten objects of wood. In these articles collected by the editors of Fine Woodworking magazine, you’ll learn how to use your hand and power tools to make tight joints that will help your furniture last for generations. 160 pages, soft cover. 835614 ...................... $17.95

Great Book Of Woodworking Projects Timborana

(Pseusopiptadenia psilostachya) Timborana has interlocking grains, brilliant burnt orange and deepening reds with a golden glow beneath. Glues and works well. Very popular for flooring and tool handles, it is also excellent for turning wood. Central America and Brazil. 152831 3/4" x 3/4" x 5", 5-pc.......................... $9.99 152828 11/2" x 1 1/2" x 12"............................$8.99 152827 2" x 2" x 12"...................................$10.99 152829 3" x 6" x 6" ....................................$24.99 152830 3" x 8" x 8".................................... $34.99

Striped Ebony

(Diospyrus sp.) The heartwood of Striped Ebony can have lines that swirl somewhat or are nearly straight—no particular pattern—which makes Striped Ebony pieces so unique. This is a very dense, hard wood that is very fine textured. It takes glue well and polishes to an excellent glass-like finish. Indonesia. 152889 1/8" x 3" x 24".................................$29.99 152888 1/4" x 3" x 24".................................$30.99 152886 3/8" x 3" x 24"................................ $31.99 152887 1/2" x 3" x 24"................................ $34.99 152885 3/4" x 3" x 24".................................$39.99

From kitchen improvements and storage solutions to classic furniture in the Craftsman and Adirondack styles, the experts at American Woodworker have provided plans and instructions for building 50 great looking projects that will improve every space in your home. With a variety of styles covering every skill level, there is sure to be something for everyone in this exciting project book. The step-by-step, illustrated instructions, along with workshop tips and shop-tested expert advice will help you grow your woodworking skills in the process. 255 pages, softcover. 847012 ........................................................$24.95

Children’s Adirondack Chair Plans & Templates

Making a Child’s Adirondack chair has never been easier! This kit has the plans and the templates in one package. Trace out the pieces using the templates and rough-cut them. Then, using the templates and a router with a flush-trim bit, trim the pieces to the final dimensions. Assemble and finish your chair according to the plans. This favorite project among many woodworkers is now one of the simplest. Materials and toys not included. 848908 ........................................................$24.99 153018 hardware kit.................................... $9.99

MILESCRAFT TurnLock 3-in-1 Router Guide Kit

Three router jigs in one kit! Includes a circle compass, edge fence and offset base. 20" aluminum beam and clear router holder cuts circles and arcs from 10" to 51" in diameter. Sturdy metal edge guide easily adjusts for cuts up to 31" from edge. Clear 13" offset base with oversized handle for stability during edge routing. Includes TurnLock technology 7" universal router baseplate to fit most fixed base and plunge routers including large 3HP models. 152668 ........................................................$39.99

$1999

Save

$10

120-Piece Diamond Tip Carving Burr Set

120-Piece Set Offers 30 Profiles In Four Grits, 150, 240, 400, And 600 149386 • reg. $29.99

Helping You Make Wood Work ®

2G


New Products

Get A FREE Switch*! $3499 Value!

Save

$34

Multipurpose Precision Router Table Switch 149970

$4999

$22999

Includes: 1/4", 3/8" And 1/2" Diameter Straight Bits; 1/2" X 14° Dovetail Bit; 1/2" Diameter Core Box Bit; 1/2" Diameter V-Groove Bit; 1/2" Diameter Flush-Trim Bit; 1/ " Radius Cove Bit; 1/ " Radius Round-Over Bit And 5/ " Radius Roman Ogee Bit. 4 4 32 150704 1/4" SH • reg. $83.99 150705 1/2" SH • reg. $83.99

• 16" x 24", 1" Thick MDF Core Top•CNC Machined 91/4" x 113/4" Opening • Includes Phenolic, 2" Hole Insert, Combination Miter & Accessory T-Track 148070 • reg. $229.99 *FREE 149970 When You Purchase 148070.

WoodRiver® 10-Piece Router Bit Sets

Whiteside

Blanket Chest Beading Bit

This bit was designed by Whiteside Machine Company to aide in the concept and reproduction of a Colonial 1670 Blanket Chest, brought back to life by Tommy MacDonald on the TV Series Rough Cut – Woodworking with Tommy Mac. The original blanket chest is in the Wadsworth Atheneum in Hartford, Connecticut. 152681 ....................................................... $34.99

Save

KREG Precision Benchtop Router Table

25%

Whiteside 3-Wing 1/ " Slotting Cutter 8

Save

A

B

•Superior To Straight Router Bits For Slotting The Edges Of Boards• Carbide Tips Cut Spline Joints In Solid Wood, Plywood, And Particleboard •A Kerf 1/2" Deep Is Cut Quickly And Cleanly •Requires Arbor To Operate Reg. SALE: 24D64 (A) 3-Wing 1 /8" Slotting Cutter................. ........................................$19.99....$14.99 24D69 (B) 1 /2" SH x 23/8" Arbor w/Bearing......... ..........................................$9.99.......$7.49

$18

$2999

WoodRiver® Round Over Router Bit, 1/2" SH 3/4" R

• Anti-KickBack Design, Precision Machined • Produces A Rounded Corner With A Decorative Fillet 151189 • reg. $47.99

PORTER-CABLE 1.25 HP Compact Router

B A WOODPECKERS® SideWinder Router Lift

Woodpeckers SideWinder Router Lifts combine instant elevation change with remotely operated, micro-adjustments to dramatically reduce the time it takes to change a router bit while providing a tool-free method of bit height adjustment. With a simple twist of the spring-assisted lift wrench, the router motor is free to be moved to any vertical location without requiring any other action. Fine, precise bit height changes are equally as effortless by “cranking” the handle located where you want it most. Both router lifts are CNC milled to exact tolerances for perfect fit in router tables with a 91/4" x 113/4" opening. Large ground and polished steel posts and precision machined guide bearings comprise each carriage,

whether sized as a “420” for the industry standard PC 7518 or “350” for common 31/2" diameter motors. Remote actuated crank precisely adjusts bit height through tough steel flex shaft and a mounting plate that can be adapted to most steel angle stands and enclosed cabinets. 39/16" bit opening accepts molded insert rings with 25/8", 1" and 13/16" guide bushing openings included. Each SideWinder router lift clamps under the router plate to secure the lift in place without screws from above. Engraved scales to simplify fence positioning with eight threaded setscrews for leveling. Includes spring-assisted lift wrench, threaded starting pin, spanner wrench and detailed instructions. 151241 (A) 350 SideWinder.................... $259.99 151242 (B) 420 SideWinder .................. $359.99

WoodRiver® Magnetic Router Bit Holders

Magnets offer the option to store bits horizontally so your bit storage consumes less floor space utilizing a smaller foot-print. Molded resin offers superior rust protection to simple holes in wood or even metal holders. Installation is as easy as drilling a 3/4" hole for hardwoods and plywood while drilling a 19mm hole in softer materials. Six holders per package. 4+

151042 151043 125931 151280

2H

Credit Card Orders: 800 225-1153

1 / " mag. bit holders...... $7.99...... $5.99 4 1 / " mag. bit holders..... $7.99...... $5.99 2 3/ " forstner bit.............. $6.50 4

Model 450 • Ergonomically designed to allow for comfortable and assured, single handed control • 1.25HP motor delivers the power to meet the toughest applications • Soft-starting motor features full-time electronic feedback • Adjustment ring enables controlled bit depth changes to within 1/64" • Depth ring and clamping mechanism • Large, low-pressure spindle lock Includes: Motor, Standard Base, Wrench, 3-Year Warranty & Instruction Manual. 847191 ..................................................... $129.99

PORTER-CABLE 1.25 HP Compact Router Kit

Model 450PK • Ergonomically designed to allow for comfortable and assured, single handed control • 1.25HP motor delivers the power to meet the toughest applications • Soft-starting motor features full-time electronic feedback • Plunge base offers four position turret style dept stop and easy access plunge lock • Plunge base provides a full 2" plunge distance • Fixed base features adjustment ring for controlled bit depth changes to within 1/64" • Depth ring and clamping mechanism • Large, low-pressure spindle lock button Includes: Motor, Standard Base, Plunge Base, Wrench, 3-Year Warranty & Instruction Manual. 847926 ..................................................... $199.99

19mm forstner bit.........$6.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


New Products

Helping You Make Wood Work 速

2I


New Products

2J

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486 www.woodcraft.com


Power Tools FESTOOL Rotex Dual Mode Sanders

• Dual-mode random orbital action • Turbo Dust Extraction • Pad brake • Variable Speed • StickFix Hook & Loop Pad System Includes: Abrasive sample pack, edge protector, removable dust channel & T-LOC Systainer. Model RO 150 FEQ 6" Dual Mode Sander with with NEW MultiJetstream design has a 3/16" stroke, 6 Amp, 320-660 RPM rotary motion speed, 3,300-6,800 OPM eccentric motion speed, 5 lbs. 571810 (A).......................... $525.00 Model RO 125, 5" Dual Mode Sander has a 9/64" stroke, 4.2 Amps, 300-600 rpm rotary motion speed, 3,000-6,000 OPM eccentric motion speed, 4.4 lbs. 571782 (B)...........................$425.00 FESTOOL Hook And Loop Sandpaper 496614 6" 50 grit (50).......$29.00 496615 6" 80 grit (50)......$29.00 496616 6" 100 grit (50)....$29.00 496617 6" 120 grit (50)....$29.00 496618 6" 150 grit (50)....$29.00 496619 6" 180 grit (50)....$29.00 496592 6" 220 grit (100) .$41.00 496594 6" 320 grit (100) .$41.00 484131 6" sheepskin........$16.00 493115 5" 80 grit (50).......$23.00 493116 5" 100 grit (50)....$23.00 493117 5" 120 grit (50)....$23.00 493118 5" 150 grit (50)....$23.00 493119 5" 180 grit (50)....$23.00 492950 5" 220 grit (100) . $37.50 492952 5" 400 grit (100) .$37.50

B A C FESTOOL Random Orbit Sanders

• Turbo Dust Extraction • Pad brake • Variable Speed • StickFix Hook & Loop Pad System Includes: Abrasive sample pack*, & T-LOC Systainer. (*excludes DTS 400 EQ). Model ETS 150/3 EQ, 6" Sander with NEW Multi-Jetstream design has a short 1/8" stroke, 2.5 Amp, 6,000 to 10,500 OPM, 4 lbs. with a T-LOC Systainer storage container. 571786 (A).......................... $295.00 Model ETS 125EQ, 5" Sander has a 5/64" stroke, 2 Amp, 6,000 to 14,000 OPM, 2.4 lbs., with a T-LOC Systainer storage container. 571817 (B)........................... $175.00 Model DTS 400 EQ. 1.67 Amps, 6,00014,000 OPM, 2.4 lbs. Triangular pad is 4" x 6". Includes: hook & loop pad; 1 abrasive sheet; filter cartridge with a T-LOC Systainer storage container. 567871 (C)........................... $215.00

ONEIDA Ultimate Dust Deputy II

Combine it with Fe s t o o l C T D u s t Extraction System to create the ultimate three stage vacuum system. Cyclonic action separates out 99% of the dust into the 9-gallon collection box and works with any shop vacuum. Kit Includes: industrial static dissipative 9-gallon. container, dust bagger, plastic bag hold-down system, cyclone separator, 6' static dissipating hose with static dissipating cuffs, hose fittings and instruction manual. 151175 . ..............................$249.99

FESTOOL Routers

• Superior Dust Extraction • Powerful • Multi-Material Speed Control • Tool-less Inserts Model MFK 700 EQ 574368 . ..............................$535.00

Model MFK 700 EQ OF 1010 EQ OF 1400 EQ 2200 EB SKU 574368 574339 574342 574277 Router Type Trim* Plunge Plunge Plunge Watts/Amps 720W/6amps 1010W/8.5amps 1400W/11.7amps 2200W/18amps RPM 10,000-26,000rpm 10,000-23,000rpm 10,000-22,500rpm 10,000-22,500rpm Depth adjustment Micro Adjust- 1/256" 21/8" 23/4" 35/32" 1/ " and 8mm 1/ " and 8mm 1/ " 1/ " and 8mm 1/ " 1/ " and 8mm Collet Range 4 4 4 , 2 4 , 2 Weight 4.2lbs 5.94lbs 9.9lbs 17.2lbs Chip Catcher N/A Yes Yes Yes Dust Extraction Hood Yes Yes Yes Yes Guide Stop N/A Yes No No U.S. Guide Bush. Adapt. N/A Yes Yes Yes 9 Column stroke /16" N/A N/A N/A Max bit diameter 1" (26mm) N/A N/A N/A Systainer SYS 2 T-LOC SYS 3 T-LOC SYS 4 T-LOC SYS 5 *Includes Vertical Base, 1.5° Horizontal Base & Feeler Bearing Set

FESTOOL Dust Extractors Accessories A Compact Cleaning Set. 10 pieces in a T-LOC Systainer. Includes extension tubes and bent pipe; floor, upholstery and crevice nozzles. 497697 . ................................. $77.00 CT Hose Garage • Store & transport hose • Attaches without tools 494388 fits CT 22, CT 33.... $50.00

FESTOOL Dust Extractors

• Automatic Tool Start • Oversized wheels CT Mini CT MIDI CTL 26 E CTL 36 E 583360 583376 583492* 583493* Filters 1 micron 1 micron HEPA HEPA Antistatic Suction Hose 11/16" x 11.5' 11/16" x 11.5' 11/16" x 11.5' 11/16" x11.5' (27mm x 3.5 m) (27mm x 3.5 m) (27mm x 3.5 m) (27mm x 3.5 m) Container Capacity 2.6 gal. (10 L) 3.9 gal. (15 L) 6.9 gal. (26 L) 9.5 gal. (36 L) Filter Bag Capacity 2 gal. (7.5 L) 3.3 gal. (12.5 L) 6.3 gal. (24 L) 8.9gal (34 L) Depth x Width x Height 17.5" x 13.5" x 16.5" 17.5" x 13.5" x 18.5" 24.8" x 14.4" x 21.25" 24.8" x 14.4" x 23.4" Weight 21 lbs. 21.4 lbs. 28.9 lbs. 29.8 lbs Noise (low setting) 62 dB 62 dB 62 dB 62 dB (max. setting) 72 dB 72 dB 72 dB 72 dB Max. Suction 99 CFM 99 CFM 137 CFM 137 CFM Power Consumption 400-1200 watts / 400-1200 watts/ 350-1200 watts/ 350-1200 watts/ 3.3-10 amps 120 V 3.3-10 amps 120 V 2.9-10 amps 120 V 2.9-10 amps 120 V Integrated SYS-dock Yes Yes Yes Yes Adjustable Suction Yes Yes Yes Yes Locking Brake Yes Yes Yes Yes Integrated Hose Garage Yes Yes Yes Yes HEPA Filtration No No Yes Yes 583360 583376 583492 583493 456772

CT Mini.............................................. $385.00 CT Midi.............................................. $435.00 CTL 26 E................................ NEW! $550.00 CTL 36 E................................ NEW! $600.00 CT Mini filter bags (5).........................$22.00

494105 452970 452971 496187 496186

VS Plunge Router, Model OF 1010 EQ 574339 . ..............................$385.00 489427 edge guide............... $36.00 Model OF 1400 EQ 574342 . ..............................$485.00 492601 guide rail att............ $72.00 Model OF 2200 EB 574277 . ..............................$825.00

CT Midi filter bags (5).........................$28.00 CT 22 filter bags (5)............................$35.00 CT 33 filter bags (5)............................$35.50 CT 26 filter bags (5)............................$31.00 CT 36 filter bags (5)............................$35.50

B FESTOOL Pendulum Jigsaws

• Powerful 720 watt Motor • Dual Port Dust Extraction • Multi-Material Speed Control • Triple Blade Guidance System • Bevels 45° to either side • Full 1" stroke – 1,000-2,900spm • 4-stage stroke adjustment • Non-marring sub-base Includes: Chip guard, Splinterguard and SYS 1 T-LOC Systainer. Available in two handle configurations. Barrel Grip Jigsaw, model Trion PS 300 EQ. 561443 (A)........................... $310.00 D-Handle Jigsaw, model PSB 300 EQ. 561455 (B)........................... $310.00 Accessories: 53/4" Jigsaw Blade. 43/4" max. cut thickness, for hard and softwood, and veneered plywood. 5-pack. 490179 . ................................ $26.00 41/8" Jigsaw Blade. 33/8" max. cut thickness, for hard and softwood, and chipboard. 5-pack. 486552 . ................................ $20.00 3" Jigsaw Blade. 21/8" max. cut thickness, for hard and softwood, and chipboard. 5-pack. 486549 . ................................$13.00 2" Jigsaw Blade. 13/16" max. cut thickness, for hard and softwood, chipboard and soft plastics. 5-pack. 486564 . .................................. $8.00 490120 splinter guard (5) . .... $8.00

Helping You Make Wood Work ®

3


Power Tools FESTOOL Domino Joiner System DF500Q

The Domino Joiner cuts “rectangular”, domino shaped slots to accept the prefabricated, solid Beech Domino tenons. • Precise positioning and accurate mortising • Powerful 420 watt motor – 24,300 RPM • Fully adjustable large pivoting fence system • Dust extraction • 5 different mortising depths • For material thickness of 3/16" to 13/16" System includes DF 500 Q Domino, D5 Cutter, Support Bracket, Wrench and custom fitted T-LOC Systainer 2. Dominoes sold separately. 574332 DFQ 500 Q system................... $800.00 Domino And Dust Extractor Packages 26574307 Domino & CT 26.................$1,295.00 36574307 Domino & CT 36.................$1,340.00 26574308 Domino Q Set & CT 26.......$1,345.00 36574308 Domino Q Set & CT 36......$1,390.00 Domino Cutter And Tenon Assortment T-LOC Systainer Systainer includes: D10, D8, D6, D5 & D4 Cutters; 300 5mm x 30mm, 190 - 6mm x 40mm, 130 - 8mm x 50mm, 85 – 10mm x 50mm, and 440 - 4 x 20mm dominoes. 497704 ...........................................NEW! $285.00

Domino Cross Stop Set For hole spacings between 4" (100mm) and 8" (205mm). 493488 ............. $65.00 Domino Trim Stop For repeatable mortising of spindles, narrow rails, or other materials from 22mm (7/8") to 70mm (23/4") wide. 493487 ...............$55.00 FESTOOL Domino Joiner Set Best Value – Save $50 when you combine the Domino Joiner with the Cross Stop and Trim Stop. 574432 DF 500 Q Set............................. $850.00 Replacement Domino Cutters 493493 D10 (10mm).$36.00 493492 D8 (8mm).... $35.00 493491 D6 (6mm).... $34.00 493490 D5 (5mm).... $33.00 D5 D6 D8 D10 495663 D4 (4mm).... $32.00 Domino Tenons Size

495661 493296 493297 493298 493299 493300

Pieces

4mm x 20mm................ 450....... $17.50 5mm x 30mm............. 1,800.......$75.00 6mm x 40mm............. 1,140.......$75.00 8mm x 40mm................. 780.......$75.00 8mm x 50mm................ 600.......$75.00 10mm x 50mm...............510.......$75.00

FESTOOL EHL 65 Planer

A FESTOOL MFT/3 Multifunction Table

The “New” and improved MFT is taller and is 15% lighter but still provides a strong, sturdy, portable worktable. Table is 281/4" x 433/8", 351/2" high, folds to 73/32", maximum work thickness 31/­16", maximum working width 279/16", working height 357/16", and weighs 62 lbs. Includes (2) guide rail supports, angle unit, fence rail, adjustable stop and guide rail FS 1080. 495462 ................................................... $595.00

• Powerful 720-watt motor • Spiral cutterhead • Designed for one-handed operations • Angled groove for chamfering Includes: Parallel Stop, Solid Carbide Blade, SYS 2 Systainer. Specifications: Cutting Depth:0 - 5/32" (0 - 4 mm), Rabbeting Depth: 0 - 29/32" (0 - 23 mm), Noise Level at Idle: 76 dB. 574543 ................................................... $410.00 488503 repl. blade....................................$25.00 488543 rabbet depth stop ..................... $12.00

MFT/3 Kapex Multifunction Table

Designed specifically for use with the Kapex sliding compound miter saw. Table is 227/8" x 347/32", 311/8" high, 42 lbs., and folds to just 8" thick. 495565 . ....................................................$390.00 Accessories: Quick Clamp for use with MFT or guide rails. 491594 (not shown)...................................$39.00 Clamping Elements, for clamping on MFT, qty. 2. 488030 (A)..................................................$98.00

Package Savings!

Visit www.woodcraft.com For Complete Details and Special Pricing On These & More Great Packages

+ 4

FESTOOL FS Guide System

For use with any Festool saw or router. 491498 55" guide rail................................ $98.00 491937 106" guide rail............................ $270.00 495207 replac. 55" splinter guard.............$16.00 495209 replac. 197" splinter guard ......... $32.00 482107 1 guide rail connector (2 rcmnd.). $15.00 489570 clamps (2), 411/16" capacity......... $36.00 489022 rail-end hose/cable deflector.......$16.00 491582 limit stop........................................$10.00 Guide Rail Accessory Kit. Includes: angle unit; limit stop; 55" splinter guard; deflector; 2 guide rail connectors; 2 clamps; Systainer 1 storage container. 497657 ................................................... $184.00

FESTOOL Plunge-Cut Saws

Get the accuracy of a panel saw, table saw, sliding miter saw or radial-arm saw in a compact package that delivers precise cuts in any environment. Both models include: Splinterguard and Limit stop. Model TS 55 EQ 561432 .................................................. $525.00 496305 standard blade, 12T, ATB.............$40.00 495372 panther blade, 14T, ATB............. $45.00 495377 lam./veneer blade, 48T, ATB......$65.00 496304 universal blade, 28T, ATB............ $47.00 496309 lam. floor/Corian® blade, 48T.....$75.00 491473 splinter guards (5)....................... $18.00 Model TS 75 EQ 561438 ................................................... $655.00 495380 universal blade, 36T, ATB............$75.00 495381 fine-tooth blade, 52T, ATB........ $106.00 495382 laminate blade, 60T, TC............ $115.00 495378 panther blade, 16T, ATB..............$65.00 Specifications: TS 55 EQ TS 75 EQ Watts/Amps: 1,200W/10A 1,600W/13A RPM: 2,000-5,200 1,350-3,550 Dust Extraction: YES YES Cut Depth: 115/16" 23/4" Cut Depth at 45°: 17/16" 21/8” Cut Depth w/Rail: 21/8" 215/16" Weight: 9.92lbs 13.6lbs Blade Diameter: 61/4" 81/4" Blade Arbor: .787 (20mm) 1.101 (30mm) Bevel Cuts: 0°- 45° 0°- 45° Guide Rail: 55" 75" Carbide Blade: 48 T 36T Systainer: SYS 4 T-LOC SYS 5 T-LOC

FESTOOL Kapex Variable-Speed Sliding Compound Miter Saw

Model KS 120 EB The KS 120 is the first 10" miter saw with variable speed, matching requirements of the material for prefect cuts, every time. • 12" Miter saw Cutting capacity • 91% Dust Collection efficiency • Dual laser marking system • Miter Fast angle transfer device Specifications: Power Consumption: 13 Amps Speed: 1,400-3,400 RPM Cutting depth: 90°/90°- 12" x 315/32" Left/right: 45°/90°- 815/32" x 315/32" Left: 45°/ 45°- 815/32" x 21/8" Right: 45°/45° - 815/32" x 13/8" Special cutting depth: 423/32" x 3/4" Crown nested capacity: 65/8", Max Bevel: 47°/47° Miter range: 50°/60° Dust port: 27/36 mm Dimensions: 28" x 193/4" x 181/2" Weight: 47 lbs. Includes: angle transfer device, hold-down clamp, wrench and high-quality 60-tooth carbide blade. 561287 . ................................................$1,300.00

+

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486 www.woodcraft.com


Power Tools

FESTOOL Parallel Guide Extension System

The new Festool parallel guide set, allows you to make accurate rips and crosscuts ranging from 1/16" to 251/2" with your Festool guide rail and TS plunge cut saw. The parallel guides have movable stops that reference the guide rail parallel to edge of your material for fast, accurate and repeatable cuts. The guides can be purchased separately or as a set. The Parallel Guide cuts from 51/2" to 251/2" while the Parallel Guide Extension cuts from 1/ " to 75/ ". 16 8 495717 parallel guide........$240.00 495718 parallel guide extension..... ............................ $135.00 P00108 parallel guide set .$325.00

FEIN MultiMaster

• High Performance 250 Watt Motor • Electronic Speed Control • Oscillates 11,000-20,000 OPM • Designed for Continuous use • 8-Point Tool Mount For Outstanding Torque Transfer MultiMaster TOP PLUS Package 151048 (shown)……............ $399.99 MultiMaster SELECT PLUS Package 151049 ……………………….$329.99 MultiMaster START Package 837966 ……………………….$209.99 MultiMaster Accessories 147964 wood kit............. $134.99 147963 floor kit............... $134.99 836850 tileworker kit..... $134.99 E-Cut Blades 148527 3-pk. ast................. $47.40 815350 13/8" prec...............$24.40 818803 13/8" std.................$19.60 830271 13/8" 3-pk. .............$39.20 815351 21/2" prec...............$26.30 818804 21/2" std................. $21.20 830413 21/2" 3-pk. .............$42.40

FESTOOL Systainer SYS-2 Attic

Organize, store and protect your valuable tools with the rugged SYS-2 Attic from Festool. The full size T-LOC Systainer 2 features a convenient, built in segmented storage compartment. Ideal for bits, drivers or any other spare parts that need to be organized. 497852 . ............................... $72.00

FESTOOL HSK-SET Sanding Block Set

Comfort and control are built in to these sanding blocks from Festool. The rounded blocks are provided in a hard and soft pad, while the rectangular block is a hard pad. The round blocks use any StickFix™ 150mm sanding discs and the rectangular block uses any StickFix™ 80x133mm sheets. Set includes a free Mini Systainer. M0107 . ............................... $75.00 Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details

Precision E-Cut Blades 830154 13/8" 3-pk.............. $48.80 830348 21/2" 3-pk...............$52.60 Universal E-Cut Blades 829454 11/8"........................ $23.70 830093 11/8" 3-pk. ............. $47.40 Segmented Blades 814637 31/8"......................$20.20 HSS Segmented Blades 814418 31/8"......................$33.10 824237 recessed blade....$63.99 25B12 flex. scraper (2)....$28.50

Sandpaper, Hook & Loop 832275 60 grit 5-pack........ $5.99 832276 80 grit 5-pack........ $5.99 832277 120 grit 5-pack...... $5.99 832278 180 grit 5-pack...... $5.99 814413 50-pc. pack..........$24.99 09W10 triangle pad (2) ...$16.99 150652 sand pad kit.........$34.99 Sandpaper, Adhesive Back 146392 80 grit 5-pack.........$4.99 146393 120 grit 5-pack.......$4.99 146394 220 grit 5-pack.......$4.99

Packages include: START SELECT TOP Quick-in Tool mounting* No Yes Yes (1) Sanding Pad Yes Yes Yes (20) Sanding sheets** Yes Yes Yes 3 (1) Universal E-Cut Saw Blade (1 /4") Yes Yes Yes (1) Segmented HSS Saw Blade No Yes Yes (1) Carbide-tipped segment saw blade No Yes Yes (1) Ridged scraper Yes Yes Yes 1 (1) Wide Standard E-Cut (2 /2") No Yes Yes (1) Sanding Pad Kit No No Yes 3 (1) M-Cut Saw Blade (1 /4") No No Yes (1) Profile sanding Set No No Yes (1) Dust extraction Assembly No No Yes (1) Perforated Sanding pad No No Yes (20) Perforated Sanding sheets** No No Yes (1) Carbide rasp (triangular) No Yes Yes (1) Tool Case No Yes Yes Accessory Value if purchased separately $70.78 $343.06 $506.52 * START includes (1) wrench and mounting bolts. ** 5 sheets each of 60, 80, 120, 180 grit.

A FEIN Dust Extractors

B

Designed for heavy, continuous, industrial use wet or dry - the rugged anti-tipping design features a powerful two-stage motor that offers bypass cooling; ensuring a long motor life. Vacuum performance measured at 90 to 99 inches of water lift means Fein dust extractors produce far greater suction than the competition. All three models come with electronic variable suction control with LED indicator allowing for maximum performance, auto-start function, and integrated drain plug. Accessory filters are available that capture particles down to .3 micron (HEPA). Turbo I Model 9-20-24 is quiet, powerful and portable. Includes 5-micron cloth bag, round upholstery brush, crevice tool, rubber adaptor for power tools and 11/4" x 16' crush-proof hose. 149513 (A)........................... $315.00 Turbo II Model 9-20-25 is Fein’s most popular model. Includes 5-micron cloth bag, and 11/4" x 16' crush proof hose. 149514 (B)........................... $412.00

C

Turbo III Model 9-20-26 has a hefty 12 gal. capacity and doubles as a dust collector. Includes 5-micron cloth bag, step adapter (21/4" to 11/4") and 21/4" x 10' crush-proof hose. 149515 (C)..........................$469.00 1 Micron Filter Kit Fits Turbo I, II & III. 129891 . ...............................$45.99 814548 replacement filter....$44.99 Model Auto start Var. suction Control Voltage Watts Static water lift Air flow Weight Power cord Hose length Hose diameter Capacity dry Capacity wet Noise at 3 ft.

Turbo I 9-20-24 Yes Yes 120 V 1000 W 90 in. 116 cfm 17 lb 16 ft. 16 ft. 11/4 in. 6 gal. 5.3 gal. 62 dB(A)

Replacement Hose 818147 11 /4" x 16'............... $71.99 815898 step adapter............ $5.99 Dust Bags 830272 Turbo I, (3).............. $14.99 830244 Turbo II, (3)............. $16.99 830349 Turbo III, (3)............. $17.99 Turbo I & II Accessory Kit includes a handle, two 19" stainless steel extension tubes, upholstery nozzle, crevice tool, brush, wet material filter, and dry and wet floor pickups. 128423 (D).............................$129.99 Turbo III Accessory Kit includes two extension tubes, handle, crevice nozzle, brush, upholstery nozzle and floor frame with brush. 820808 (E) not shown.......$134.99 Turbo II 9-20-25 Yes Yes 120 V 1050 W 90 in. 116 cfm 28 lb 16 ft. 16 ft. 11/4 in. 9 gal. 6.8 gal. 57.8 dB(A)

Turbo III 9-20-26 Yes Yes 120 V 1200 W 99 in. 126 cfm 36 lb 16 ft. 10 ft. 21/4 in. 15 gal. 12 gal. 57.8 dB(A)

Helping You Make Wood Work ®

5


Power Tools JET Air Filtration System

Model AFS-1000B • 3-Stage Filtering - 1 micron • Remote Control & Timer • 3 speeds – 550,702 & 1,044 CFM • Disposable Outer Filter – Washable • Filters air 12 times an hour for a 20' x 20' x 8' shop 815488 . ........................... $339.99 818941 electrostatic filter .$54.99 818943 charcoal filter.........$57.99

JET 11/2 HP Dust Collector With Canister

Model DC-1100CK* • Motor 115/230V, 11/2HP, 1PH • 2-Micron Canister • 1,100 CFM of air flow and 8.9" of static pressure • Two 4" ports or one 6" port • Overall dimensions 37" x 20" x 79" Shipping wgt. 120 lbs., regular shipping rate plus $55. 821769 D/S..................... $629.99

JET VS Pro Wood Lathe

Model JWL-1442VS** • Heavy-duty cast-iron lathe bed • Headstock swivels 360° with positive stops at 45° and 90° • Motor: 1HP, 1PH, 115/230V, prewired 115V, 7.4/3.7A • 8 speeds- 450-3,000 RPM • Distance Between Centers: 42" Swing over Bed: 14" • Headstock/Tailstock Taper: #2MT • Spindle Nose: 1" x 8TPI Shipping wgt. 448 lbs., regular shipping rate plus $75. 822430 D/S.................... $1,349.99

JET Benchtop Mortiser

Model 708580 • Powerful 1/2 HP TEFC Motor (1,725 RPM ) • Heavy duty cast iron bed • Three jaw drill chuck • Rack and pinion head (raising and lowering) • Two hinged side doors to allow for complete drill chuck access • 1/2" max. mortise chisel capacity • 43/4" head stroke Includes FREE 1/4", 3/8" and 1/2" chisel and bit set 814541 D/S......................... $319.99 WoodRiver® Chisel & Bit Sets 143996 1/4" . .......................$13.50 143997 5/16"........................$13.50 143998 3/8" . .......................$13.99 143999 1/2".......................... $17.99 144010 4-piece box set......$41.99

JET Mini Lathe With Indexing Head

Model 708375 • 1/2HP, 1PH, 115V Motor • Six speeds: 500; 1,200; 1,450; 2,130; 2,400 and 3,950 RPM • 10" swing over the bed • 14" Spindle capacity - which can be increased by adding a 20" bed extension • 1" x 8 TPI Spindle • #2 Morse Taper on head and tail stock • Overall dimensions: 245/8"D x 71/4"W x 14"H Includes: 6" tool rest, live center, 3" face plate, spur center, tooling knockout, and safety goggles. 147822 . ............................. $399.99 Variable Speed Mini Lathe With Indexing Head Model 708375VS. This lathe has the same features as 708375 with variable speed ranging from 500-3,900 RPM. Shipping weight 78 lbs. 147823.................................$479.99 818913 floor stand..............$189.99 819933 bed extension.......... $94.99

The following tools and accessories are also available at Woodcraft. For more information, call your local Woodcraft Store, check out woodcraft.com, or call us at 800-225-1153.

824779 DC650CK 1HP dust collector plus D/S.........................$499.99 816763 708404 benchtop spindle sander plus D/S..................$439.99 835634 7084080K 10" ProShop tablesaw w/30" fence D/S.... $899.99 841365** 17" drill press, 250 lbs. D/S.................................. NEW! $539.99

JET 14" Bandsaw

Model 708115K* • Micro adjusting upper blade guide • “V” groove blade guide bar for consistent positive alignment • Graphite impregnated Jet Blocks® for cool, true running blades • Extra large 15" x 15" cast iron table • Table height from floor is 431/2" • Totally enclosed fan cooled 1HP, 1PH, 115/230V motor • Built in dust chute • Machine is 68"H x 26"W x 19"D • Specifications: 6" cutting capacity height, 131/2" cutting capacity width, L/R table tilt 45°/10°, 1/8" minimum saw blade width, 3/4" maximum saw blade width, 931/2" saw blade length Shipping weight: 257 lbs. regular shipping rate plus $55. 961123 D/S.........................$679.99 817372 rip fence................$119.99 961137 6" riser block..........$94.99 85T70 miter gauge............$64.99

JET Benchtop Sander

Model 10-20 Plus • Powerful 1HP TEFC motor • Variable feed rate of 0-12 ft. /min. • Drum speed 1,700 RPM • Maximum sanding width of 20" (two passes) • Minimum material length of 21/4" • Handles stock from 3" down to less than 1/32" • 4" dust port • Includes: (1) 80 grit abrasive strip, (1) 100 grit abrasive conveyor belt 825629 D/S...................... $699.99 826127 stand .................. $149.99 147118  repl. feed belt........ $26.99 Ready-To-Wrap Abrasives are available in grits of 24 to 220 to handle any task. Each grit contains six (6) strips. 826064 60 grit................... $45.99 826065 80 grit................... $45.99 826066 100 grit................. $45.99 826067 120 grit................. $45.99 826068 150 grit................. $45.99 826069 180 grit................. $45.99 826346 220 grit................. $45.99

D/S = Item drop ships direct from manufacturer.

JET 22-44 Plus Drum Sander

Model 649005K** • 13/4HP, 115V, TEFC motor • Exclusive SandSmart controlled conveyer (0 to 10 FPM) • Aluminum sanding drum (1,700 RPM ) • Cast iron hand wheel with 1/16" per turn height adjustment • Maximum sanding width of 44" (with two passes) • Maximum sanding thickness of 4" • Built in dust port • Includes stand, shelf, (1) 80 grit abrasive strip and (1) 100 grit abrasive conveyor belt Manufacturer recommends 400 to 600 CFM dust collection on a 20 Amp circuit. Shipping weight 350 lbs., regular shipping rate plus $75. 825635 D/S................... $1,699.99 22-44 Plus Infeed/Outfeed Tables. Solid steel tables add extra support for longer work pieces. 825985 .............................$119.99 Ready To Wrap 22-44 Plus Sandpaper. Pre-cut, ready to use. Each pack contains three strips. 812800 36 grit....................... $45.99 812801 60 grit....................... $45.99 812802 80 grit....................... $45.99 812803 100 grit..................... $45.99 812804 120 grit..................... $45.99 812805 150 grit..................... $45.99 812806 180 grit..................... $45.99 812807 220 grit.................... $45.99

JET Drum Sander

Model 16-32 Plus* • 1.5 HP Motor- 115V • Variable speed (0-10' per minute) feed rate • Top mounted handle height adjustment • Handles stock from 3" down to less than 1/32" • Maximum sanding width of 32" (with two passes) • Built in dust port • Includes: Stand, Storage shelf, (1) 80 grit abrasive strip Shipping wgt. 195 lbs., regular shipping rate plus $55. 811571 D/S.........................$999.99 813280 casters .................$144.99 Model 16-32 Infeed/Outfeed Tables. Solid steel tables make it easier to sand pieces as short as 21/4" or veneers as thin as 1/64". 813013 .............................. $124.99 147116 repl. feed belt............$51.50 Ready To Wrap Performax Sandpaper. Pre-cut, ready to use packs of four strips. 812791 36 grit ....................$45.99 812792 60 grit.....................$45.99 812793 80 grit ....................$45.99 812794 100 grit...................$45.99 812795 120 grit...................$45.99 812796 150 grit...................$45.99 812797 180 grit................... $45.99 812798 220 grit................... $45.99

Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details.

6

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486 www.woodcraft.com


Power Tools POWERMATIC 2000 10" Table Saw

Model 1792000K Shipping weight 740 lbs., ABSOLUTELY FREE SHIPPING! 832671 D/S.................................................................................. $2,899.99

POWERMATIC 15" Planer with Byrd SHELIX® Helical Cutterhead

Shipping wgt. 507 lbs., ABSOLUTELY FREE SHIPPING! 835284 D/S.................................................................................. $2,799.99

*Includes FREE 826321 Riser Block w/824315 purchase, a $99.99 Value!

POWERMATIC Lathe

Model 3520B • Motor: 2HP, 1PH/3PH, 220V, 6.2A • Variable speed and digital RPM readout (high 125-3,200; low 50 1,200) • Spindle lock and built-in spindle indexing on the headstock • Distance Between Centers: 341/2" Swing Over Bed: 20" • Headstock/Tailstock Taper: MT-2 • Spindle Nose: 11/4" x 8TPI • Ram Travel: 41/2" • Hole Through Spindle: 9/16" • Overall Dimensions: 75"L x 27"W x 58"H Includes: Safety shield, 3" face plate, face plate wrench, 14" tool rest, ball-bearing live center, brass tipped knockout rod, and drive center. Shipping wgt. 682 lbs., ABSOLUTELY FREE SHIPPING! 831997 D/S..................... $3,899.99 D/S = Item drop ships direct from manufacturer.

POWERMATIC PM2800 Variable Speed 18" Drill Press

Model 1792800** • 1 HP, 115V/230V motor • Spindle Speed: 400-3,000 RPM (digital readout) • Twin lasers • Single handle speed adjustment • Table Size: 16" X 14" Fully Extended: 16" X 26" • Table Tilt: 0 to 90 degrees • Fence Size: 117/8" X 195/8" • Footprint : 31.5"L x 23.5"W x 68"H Shipping weight, 302 lbs., regular shipping rate, plus $75. 835313 D/S........................ $999.99

Delta 17" Laser Drill Press

Model 17-959L*** • 3/4 HP, 120V/240V motor • 16 Speeds: 215-2,750 RPM • Dual Lasers • Task Light • Table Size: 18" x 14" • Table Tilt: L & R: 0-90°; Forward: 0-45° • Table Insert: 33/4" x 33/4" • Spindle Taper: #2 MT • Chuck Taper: Jacobs 3 • Quill Stroke: 47/8" • Key Chuck Capacity: 5/8" • Dimensions: 70"H x 18"W x 28"D Shipping weight 268 lbs., regular shipping rate plus $75. 835031 D/S.........................$579.99

830663 TP305 12" Portable Planer D/S..................................... $289.99 15 amp, 120V motor; 15"H x 20½1/2"W x 23¾½3/4"D; 62 lbs. 825369 37-275X 6" Prof. Jointer ................................................... $649.99 1HP 120/240V single phase induction motor, 228 lbs.** 821867 Model 14-651 Deluxe Hollow Chisel Mortiser ................. $279.99 HP 120V induction motor, three-jaw chuck has a 3/8" capacity

1/ 2

DeWALT 13" Two Speed Planer

Model DW735X A 15 Amp motor drives the cutterhead at 10,000 RPMforcuts,upto1/8".Three knife cutterhead delivers 30% longer knife life and makes knife changes easier. Two-speed gear box optimizes cuts at 96 or 79 per inch.

POWERMATIC 14" Bandsaw

Model 1791216K** FREE Riser Block* • 11/2 HP, 115/230V motor • Full 6" resaw capacity • 131/2" frame-to- blade clearance • 2-piece cast-iron table -15" x 15" tilting (45° right, 10°left) fixed 15" x 5" extension • 9-spoke cast-iron wheels • Carter quick tension release lever • Micro-adjustable dual bearing blade guide system • Quick-release T-square style fence system • 931/2" blade range from 1/8" to 3/4" Includes: Adjustable miter gauge, rip fence 1/4" bandsaw blade, gooseneck work light, chip blower and 4" dust port Shipping wgt. 203 lbs., regular shipping rate plus $75. 824315* D/S...................... $999.99 826688 mobile base.......... $179.99 826321 riser block D/S....... $99.99

43A23 43A22

The following tools and accessories are also available at Woodcraft. For more information, call your local Woodcraft Store, check out woodcraft.com, or call us at 800-225-1153. DW625 3 HP VSE plunge router D/S........................ $299.99 DW682K Plate Jointer D/S.......................................... $189.99.

DeWALT 20" Heavy Duty Variable Speed Scrollsaw

Model DW788 1.3 Amp, 400-1,750 strokes per minute 20" throat. Cast-iron table tilts 45° left and right and has a capacity of 2" thick stock at 90°. Up-front controls, tool-free blade change system, single

Automatic carriage lock reduces the movement that causes snipe. Maximum depth of cut 1/8", 6" depth and 13" width capacity. Includes dust hose adapter and ejection chute. 92 lbs. 845599WH.........................$649.99 825518 stand...................$194.99

lever tensioning, and an upper arm that lifts out of the way for threading blades through pre-drilled holes make thisatrulyuserfriendlyscrollsaw. Shipping weight 68 lbs. 127233 ............................. $549.99 813079 stand . ....................$89.99 813083 work light ...............$39.99

DELTA Variable-Speed Midi Lathe

Model 46-460* • Powerful 1 HP Max, 120V, 60 Hz, 1 Phase • Electronic Variable Speed • Speed: 250 - 700; 600 - 1,800 and 1,350 - 4,000 rpm • Forward and Reversing function • Large 121/2" swing capacity • Indexing pin to lock the head stock spindle in 24 different locations • All cast-iron construction • Up front belt access w/ patented belt tensioning system • Distance between Centers: 161/2"; With Extension: 42" • Drive spindle thread count: 1" - 8 RH TPI Thread • Head and tailstock taper: #2 MT Includes: 3" face plate, 6" and 10"

tool rests, spur center, ball-bearing live center, heavy-duty, steel knockout bar and wrenches 843625 D/S ...................... $599.99 Shipping weight 106 lbs., regular shipping rate plus $55. 843793 reversible Nova G3-D . ........ chuck D/S..............$145.00 843906 stand D/S..............$164.99 843913 modular bed extension . ..... D/S.........................$149.99 843905 modular stand ext. ............. D/S ...........................$79.99

DELTA 10" Unisaw 3 HP LT, With 36" Biesemeyer Fence System

Model 36-L336*** • Single-Cast Trunnion System provides increased accuracy • Sure-Lock Dual Front Cranks • Precision Bevel Gauge • Tool-Free Split Guard • 2-Position, Quick Change Guard System improves safety • BIESEMEYER fence system and accessory drawer • 5 Year Warranty • Motor: 3 HP, 220V, 1 Phase, 60 Hz 412405 (shown) D/S....... $3,175.99 Shipping weight 624 lbs., regular shipping rate plus $125. FREE STANDARD SHIPPING!

DELTA 10" Unisaw 3 HP LT, With 52" Biesemeyer Fence System

Model 36-L352*** Same specs as above. 842828 D/S.................... $3,299.99 Shipping weight 661 lbs., regular shipping rate plus $125. FREE STANDARD SHIPPING!

Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=Residential Fee of $45, plus Liftgate Fee of $35 - if required.

Helping You Make Wood Work ®

7


Power Tools MAKITA 61/2" Plunge Circular Saw

Model SP6000K • Precision cutting delivers splinter-free mirror finish • Electronic Speed Control (2,000 5,200 RPM) • Powerful 12 Amp Motor • Electronic Soft Start Feature for Smooth Start-Ups • Electric brake • Large Cutting Capacity (23/16" at 90° and 19/16" at 45°) • Bevel capability (-1° to 48°) with positive stops at 22.5° and 45° • Close to the wall cutting (11/16") • Built-in depth stop allows a preliminary cut of 1 /16" for clean and splinter-free cutting • Large 17/16" rear dust port • Optional guide rail system • Saw base is attachable to other guide rail systems Includes: Carbide-Tipped Blade - 48T, Hex Blade Wrench, Plastic Tool Case. Shipping wgt. 6.2 lbs. 843039 ..............................$399.99 843040 rail guide, 118".....$249.99 843041 rail guide, 55"......... $99.99 843042 clamp set................ $39.99

TREND T4 1.1 HP VS Plunge Router

BOSCH 12" Dual Bevel, Glide Miter Saw

Model GCM12SD • Powerful 15amp motor, 3,800 RPM no-load speed • Patented Axial-Glide™ System: Un m a t c h e d p r e c i s i o n a n d smoothness. • Cutting Capacity: 14" horiz. capacity (nominal); 6 1/2 " vert. capacity against the fence (base); 61/2" crown capacity against the fence (45° spring) • Upfront Bevel Controls: For quick and easy bevel settings without reaching behind the saw • Integrated Expanding Base Extensions: 40 inches left to right • Bevel Angle Range: 48◦°left/48°right • Miter Angle Range: 52° lt./60° rt. • Bevel Detents: 0, 33.9°, 45° left/ right for accurate cuts • Weight: 65 lbs. Includes: 12" 60T Blade, material clamp and dust bag 152580 . .............................. $799.99

BOSCH 41/2" Paddle Switch Angle Grinder

• Max. Motor HP: 1.1 • Spindle Thread: 5/8" - 11 • Weight: 4.3 lbs. Includes: Multi-Position Guard, Vibration Control Auxiliary Handle, Flange Kit, Spanner Wrench and Abrasive Wheel 835918 . ................................ $89.99

BOSCH Gravity Rise Miter Saw Stand

2i-Drill 12-Volt Lithium Battery Powered 2-Gear Variable Speed Drill Driver

8

Specs: • Power: 12 volts • Two Ranges: 0-400 RPM & 0-1,300 RPM (no load speed) • Forward and reverse • Chuck size: .04-.4" (1-10mm) one-piece with Spindle lock • Johnson motor, #600 • Max. soft/hard torque: 10/25 Nm • 2 Sanyo Lithium Ion batteries: 1.3Ah. • Charging Time: 45 – 60 minutes • Weight: 1.75 lbs. w/o battery pack Includes: 2-Speed Drill Driver, Two 1.3Ah Sanyo Lithium Ion batteries, Built-in LED work light, Tool stand, International charger 151253 . ..............................$109.99

Credit Card Orders: 800 225-1153

Model TRC001 Triton’s router has features that set it solidly above the competition! • Auto lock, through-the-base bit changing • Rack & pinion plunge mechanism that converts to free plunge • Cut guide fence w/circle cutting • Easy to set turret stops • Max. plunge depth of 25/16" • Max. bit diameter of 3" • 21,000 RPM VS with Soft Start • Electronic speed maintenance under load • Winder handle for table mounted adjustments Includes 1/4" collet reducer and 1/2" straight carbide bit, base plate with edge guide and circle cutter. 150289 TRC001................. $269.99 . 150288 MOFOO1 21/4HP... $229.99 Accessories 150882 7-piece template..... $49.99 150883 adapter plate...........$15.99 D/S = Item drop ships direct from manufacturer.

CarveWright™

The Bosch 1810PS has the power and performance needed for any power carving applications that specify a 41/2" angle grinder. • Paddle Switch with lock-on mechanism for better operator comfort and control • ServiceMinder™ brushes will stop the tool when preventive maintenance is required • Amperage: 8.0; No Load RPM: 11,000

Setup and breakdown in seconds without removing the saw on the Bosch T4B Gravity Rise Miter Saw stand. Features adjustable material supports and repetitive stops, rapid release universal tool mounts, 8" pneumatic wheels and adjustable leveling feet. Constructed of powder coated 11/2" tubular steel and designed to fit most miter saws. The expansion rails provide material support up to 18 ft. 841931 . ..............................$339.99

Introducing Trend’s T4EK is a light duty 1.1 HP plunge base router with electronic variable speed motor. This plunge router is ideal for inlaying, sign making, edge molding or any other light duty routing applications. A convenient spindle lock makes short work of bit changing. With the easily removable router base, the T4EK motor is perfect for any power carving enthusiast. Includes three collets (1/4", 6mm and 8mm), a clip-in dust spout, a 5/8" template guide bushing, edge guide and storage case. 840791 . ..............................$129.99

TRITON 31/4HP Router

The CarveWright™ is a revolutionary compact and powerful CNC Woodcarving Machine. Measuring only 15" x 18" x 26", the rising head and feed through configuration accepts work pieces 141/2" inches wide, 5" high, and with proper support nearly any desired length. Using the CarveWright™ woodworking system is as easy as 1-2-3 1. Design using CarveWright™ Designer software. 2. Upload the project to a special memory card 3. Insert the memory card into the CarveWright™ The onboard LCD display will guide you, step by step, through your project. CarveWright™ can be used for routing, cutting, carving and jointing and has a patented "Quick Change System" for

CarveWright™ Scanning Probe

The CarveWright scanning probe opens up the world of 3D scanning to anyone. Now you can reproduce original pieces, repair antique furniture, and even copy trim and moldings with ease.

quick and easy bit changes. CarveWright™ will automatically choose the correct bit for your job and measure your work piece. An intuitive and easy to use PC or Mac compatible Software Package allows you to manipulate your design on a 3-dimensional representation of your work piece. Images can be "dragged and dropped" onto the work piece display; combine images, add text, size and re-shape, or adjust the carving depth. You can even draw your design using 2D drawing capabilities. The CarveWright™ woodworking system comes equipped with one carving bit, one cutting bit, two 1/4" bit adapters, vacuum bag, a bit removal tool, a CarveWright™ memory card with programmer, CarveWright™ design software, user's manual and a one year warranty. 148544 D/S.................... $1,899.99 148706 repl. 1/16" carving bit ........... D/S........................... $39.99 148707 repl. 1/8" straight bit ............ D/S........................... $39.99 Almost any material can be scanned -- even soft materials such as clay or wax. Scanning resolution up to .005 inches are possible. Just plug the probe into the CarveWright, set the desired scan area, and watch the CarveWright go to work. With the included CarveWright Import software you can manipulate the 3D output to meet your needs. 148545 D/S........................$299.99

CarveWright™ Full Bit Set

Configured specifically for the CarveWright System, these top quality, all carbide bits, are designed for long-life and precise cutting performance. The Bit Set includes 60 degree V-Bit, 90 degree V-Bit, 1/ " diameter Ball Nose Bit, 1/ " diameter 4 2 Ball Nose Bit, 3/8" diameter Straight Bit,

3/ " radius Classic Ogee Bit, 1/ " radius 8 2 Classic Ogee Bit, 1/8" radius Roman 3 Ogee Bit, /16" radius Roman Ogee Bit, 1/4" radius Round Over Bit, and 1/ " radius Round Over Bit. 2 148546 D/S........................$299.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


RIKON 18" 2-HP Bandsaw

Model 10-345*** • 21/2 HP, 220V induction motor • 2 speeds, 1,510/ 3,220 ft/min • Accepts 142" blade (1/4" to 11/4", max width) • Cast-iron upper and lower wheels • Quick-release blade tension lever • Q-release top wheel blade tension • Cast-iron upper and lower wheels • Upper and lower ball bearing blade guide • Cutting height is 12" & width is 183/8" • Table width is 21" x 19" and includes 2 “T”-slot grooves • Table tilts 10° left and 45° right, height from floor is 375/8" • Two 4" dust ports • Two-year warranty Shipping wgt. 500 lbs., regular shipping rate plus $125. 833083........................... $1,499.99

RIKON 6" Belt-10" Disc Sander

Model 50-120* • 3/4 HP, 110V induction motor • 6" x 48" belt operates both vertically, horizontally • 10" disc sander • 8" x 14" cast iron table tilts to 45° (standard 3/8" x 3/4" T-slot) • Heavy-duty cast-iron base • Quick-release belt tension lever • 21/2" dust port Includes: heavy-duty miter gauge, accessory work support for working in the 90 degree vertical position. Shipping wgt. 110 lbs., regular shipping rate plus $55. 828577 ..............................$429.99 831666 stand....................... $69.99 146964 150 grit PSA disc...... $4.99 146965 180 grit PSA disc...... $4.99 146966 240 grit PSA disc..... $4.99

RIKON 4" x 36" Belt/Disc Sander

Model 50-110 • 1/3 HP, 110V induction motor • 6” Disc sander • The 9" x 61/4" cast iron table tilts to 45° w/ standard T-slot 828563 . ..............................$139.99

RIKON 12" 1/2 HP Disc Sander

Model 51-200 • 1/2 HP, 120V, 6 Amp, 1,720 RPM motor • 171/8" x 61/2" table (3/8" x 3/4" miter slot) • Rack-and-pinion table adjustment • Table tilts positive/negative (detents 0°, 22.5°, 45°) • Paddle on safety switch for quick shut down • Cast-iron base with mounting holes • Manual brake • Dust port (21/4" I.D or 21/2" O.D.) Includes: miter gauge, (1) 80 grit abrasive disc and a two-year warranty. 839953 . ..............................$219.99

Power Tools NOVA DVR XP Lathe* RIKON Mini Lathe

Model 70-100 • 1/2 HP, 115V TEFC motor • Six speed (430, 810, 1,230, 1,810, 2,670, 3,900 RPM) • 12" swing and 16" between centers • Ability to add one or more bed extensions • 12 position indexing head • Self-ejecting tailstock with 21/2" ram travel • Easy access to the top and bottom pulleys for quick speed changes • #2 MT head stock • Overall dimensions: 32"L x 101/2"W x 19"H Includes: 8" tool rest, live center 3" face plate, spur center, and tooling knockout. Shipping weight 89 lbs. 832637 ............................$399.99 832638 241/2" ext. bed....$109.99 832639 6" face plate......... $24.99 832640 4" tool rest.............$17.99 832641 6" tool rest............ $21.99 833262 stand . ................ $179.99 833263 extension.............. $99.99

RIKON 14" Deluxe Bandsaw

Model 10-325** • 11/2 HP, 110/220V motor • 2 speeds (1,445 & 2,950 ft/min) • 13" resaw capacity • Micro-adjustable blade guide bearings • Quick-release blade tension • 16" x 201/2" cast-iron table • Cast-iron wheels • Accepts 111" blades (1/8" to 3/4" max. width) • 4" dust port Includes: work light, heavy-duty fence with re-saw bar. Shipping wgt. 261 lbs., regular shipping rate plus $75. 834771 . ............................ $949.99

RIKON 10" Bench Top Bandsaw

Model 10-305 • 1/3 HP, 3.5 amp motor • Speed 2,780 ft/min. • Safety paddle switch • Cutting capacities: Height – 45/8" Width – 95/8" Table – 13" x 12" • Edge-Facing Thrust Bearings • 701/2" blade range from 1/8" to 1½ /2" 150503 . ..............................$299.99 831665 stand........................ $59.99 846362 miter gauge.............. $15.99 An asterisk indicates that this item is shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details.

• 13/4 HP, 115V, 15 Amp (2 HP, 220V) direct drive motor • Computer Controlled using Adaptive Control™ Software • Programmable with 5 favorite speed pre-sets • Electronic variable speed with forward andreverse (100 to 3,500 rpm) • No pulleys or belts for maximum torque transfer • Solid cast iron construction – single casting headstock • Incredible turning smoothness • 360° Swivel head • Spindle lock and 24 position indexing • 24" between centers • Bowl turning capacity: 16" onboard - 29" outboard • 11 /4" x 8 TPI spindle • Quick-Action Cam Controls • 20" Extendable Beds available • Optional Cast-Iron Stand available Includes: 3" faceplate, 12" tool rest, #2 MT live center, #2 MT spur center, and a full five-year limited warranty. Shipping weight is 200 lbs., regular shipping rate plus $55. Optional Accessories: see below. 146719 DVR XP ..................................................................................... $2,249.99

NOVA Wood Lathe

Model 1624-44** • 11/2 HP, 115V motor • Reversible motor function • 8 speeds (215; 360; 904; 1,030; 1,450; 2,180; 2,900; 3,630 RPM) • Quick-speed changes using proven cam action • Solid cast-iron construction • 360° Swivel head • 24 position indexing • 24" between centers • Bowl turning capacity: 16" onboard • 29" outboard when using optional outboard tool rest assembly • 11 /4" x 8 TPI spindle • Quick-Action Cam Controls • Steel Stand • 20" Optional Extendable Beds available Includes: 3" faceplate, 12" tool rest, #2 MT live center, #2 MT spur center, and a five-year mechanical warranty, one year motor warranty. Shipping weight 260 lbs., regular shipping rate plus $75. 147595 ..................................................................................................... $1,249.99 DVR XP & 1624-44 Lathe Optional Accessories include a steel hand wheel that accepts our ball bearing, shop vac adaptable vacuum kit for vacuum faceplate turning. 126228 steel hand wheel...................................................................$29.99 146901 20" bed extension...............................................................$239.99 125761 outboard tool rest assembly..............................................$294.79 126226 HD bowl rest with 1" shank...................................................$47.99 142468 3" tool rest.............................................................................$24.99 143659 extended stand.................................................................. $209.99 148552 cast iron stand....................................................................$429.99

RIKON Dust Collector With 5-Micron Filter • TEFC Motor' Continuous Duty • Built-In Casters Model 60-100B • 1 HP, 110V, 7 amp • 650 CFM • Balanced 9" Steel Impeller • 5 Micron Top Bag, Reusable 143/4" Clear Plastic Lower Bag • 4" Inlet 847117 1 HP.......................$279.99

RIKON Dust Collector

Model 60-200B • 2 HP, 110V, 16 amp • 1,250 CFM • Balanced 12" Steel Impeller • 5-Micron Top Bag, Reusable 20" Clear Plastic Lower Bag • Quick Release Straps For Lower Bag Changing • Dual 4" Inlets 847118 2 HP....................... $399.99

Helping You Make Wood Work ®

9


Power Tools Porter-Cable 31/4 HP Router

Model 7518 This industrial-quality router features an electronic fivespeed 15 amp motor with a range from 10,000 to 21,000 RPM. The specially engineered 1/2" collet auto-

Porter-Cable 21/4 HP VS Router Kit A

Model 895PK Powered by a 21/4 HP, 12 Amp variable-speed motor with electronic-feedback circuitry that provides constant speed: 10,000 – 24,000 RPM. An auto spindle lock and collet access from above the router table

Porter-Cable 13/4 HP Router

Model 690LR. Powered by an 11 Amp motor at 27,500 RPM, the 690 has been the industry standard for years. The included 1/2" & 1/4" collets feature an auto-release system that ends “frozen” bits.

OSBORNE Table Saw Miter Gauge

The redesigned Osborne gauge brings you the advantages of a new patented triangular design more stable and accurate miter cuts on your table saw. New features include a guide bar with three expansion slots to provide a more positive fit in your saw. Bar adjustments are made from the top for an easy and perfect fit on your saw. A new fence extension allows for solid support of long material and carries the flip stop out to 42 inches.

839566 834847 832179 829232 834091

enables you to change bits without removing the m o t o r. H e i g h t Adjustment hanB dle allows you to lock, unlock, and adjust the bit height from above the table when used in a router table. Includes fixed and plunge bases, and carrying case. 826473 (A)........................... $279.99 826472 (B) w/"D" handle.... $279.99 The motor housing and base are precision cast aluminum to help dissipate heat. The accurate micrometer depth-of-cut adjustment allows easy height adjustment of 1/128". Includes: 1/ " & 1/ " collets, two collet 2 4 wrenches, and manual. 143163 D/S.................$159.99 D/S = Item drop ships direct from manufacturer. To adjust the fence closer to or farther from the blade, loosen the two fasteners on the rear of the fence then position the fence exactly where you want it and retighten the knobs. Lastly, this gauge produces accurate cuts, accurate to within 1/30°; if calibration is ever necessary, use the ZERO calibration adjustment feature. 148941 . ............................ $124.99

The following tools and accessories are also available at Woodcraft. For more information, call your local Woodcraft Store, check out woodcraft.com, or call us at 800-225-1153. 10-105 M1, 1.5 HP, 115/230V, 2 micron filter...................$469.99 10-005 M1, 1 HP, 115/230V, 2 micron filter......................$319.99 10-105CF M1, 1.5 HP, 115/230V, canister filter................$619.99 75-050T M1*, 5/8" hollow chisel mortiser.......................... $589.99 50-EXBC 10 Excalibur over arm blade cover....................$399.99

EXCALIBUR 21" Scroll Saw

Model EX21 FREE STAND* The Excalibur 21" variable speed scroll saw’s unique design provides a stable platform when cutting straight or on an angle. Unlike other scroll saws where the table is tilted for angled cuts, the entire head of the Excalibur tilts 45° to the left or the right. This allows the user to better control the work piece on a flat table surface, for a more safe and accurate cut. Additional features include a 120V 1.3 amp constant torque permanent magnet

10

releases the bit, eliminating bit “freeze-up”. Another unique design puts the bottom bearing closer to work for minimum bit run-out and vibration. 85O28.......................$349.99 821719  motor, only............ ...............................$299.99

motor, large 13 1/2" x 23 1/2 " table surface, no tools required finger operated blade clamps, easy access speed and tension controls, organized blade storage on base, and onboard dust blower. Specifications: Throat: 21"; Maximum cutting depth: 2"; variable speed: 400-1,550 SPM; Dimensions: 15" H, 15" W, 32" L; Weight: 65 lbs. Includes operation manual and 2 year warranty. 148838PS*.......................... $819.99 148839 stand.................... $116.99 148840 footswitch.............. $24.99 *FREE stand with 148838PS purchase.

Credit Card Orders: 800 225-1153

Porter-Cable 390K 5" VS Random Orbit Sander

benefit of electronic speed control under load for 42% faster material removal and electronic braking that reduces free-spin by 73% for increased productivity. An integral dust port accepts 1" and 11/2" vacuum hoses for optimal dust collection. Specifications: Amps: 3.5, Orbit/Min: 7,000-12,000 OPM, Tool Height: 4". Includes: kit box, operating manual, and 3-year limited warranty. 149120 . ..............................$109.99

Porter-Cable 371K Compact Belt Sander

OD vacuum hoses.Includes sander, 80 grit sanding belt, carrying case, and operating manual. Overall unit length is 103/4", and weighs 5.75 pounds. 835315 . ........................... $119.99 835645 belt assort. (5-pc.) .$11.99 148464 60 grit belts (5)......$10.99 148465 80 grit belts (5) .....$10.99 148466 100 grit belts (5)....$10.99 148467 120 grit belts (5)....$10.99 148468 150 grit belts (5)....$10.99 148469 180 grit belts (5)....$10.99

Porter-Cable Plate Jointer Kit

blade changes. Front handle is attached to the fence, not the motor, Kit includes: 2" (face frame) and 4" (standard) diameter blades, centering plate, spanner wrench, 1" port with dust bag, HD plastic storage case. 813666 D/S........................ $219.99

This low profile hook and loop sander was designed with optimized ergonomics that not only allows for better comfort and control. Featuring stateof-the-art EnduraTech “brushless” Motor technology that has 71% fewer wear components for five to ten times longer motor life. The 390K’s new motor technology provides a side

This 5 Amp sander turns a 21/2" x 14" belt at 1,100 SFPM. Low center of gravity, combined with ergonomic rubberized non-slip grips, a removable auxiliary front handle, and a unique cord exit grip, offer flexibility and control necessary for any sanding job. The removable dust port accepts both 1"ID and 35 mm

Model 557 Biscuit joiner y in stock widths as narrow as 11/2"! A powerful 7.5 Amp motor 0° to 135° tilt fence with micro-adjust capability and spindle lock for easy

SAND-FLEE Portable 18" Drum Sander

• 1/3 HP, 115V, 1,725 RPM Baldor® motor • 1/4" thick, steel top nickel-plated w/front T-Slot • Powder-coated steel base • Integral down-draft system for superior dust collection • 18" wide, precision machined aluminum drum, for hook & loop style sandpaper • 18"-36" of sanding width and unlimited height • 24" extruded aluminum fence

SAND-FLEE Portable 9" Drum Sander

• 1/3 HP 115V, 1,700 RPM motor • 1/8" zinc-plated steel top • “New” Micro-height-adj. knob • Integral down draft dust collection

Excalibur 16" VS Scroll Saw Model EX16

• Variable speed: 400-1400 SPM, 120V, 1.3 amp constant torque motor. • Tilting Head 45°left or the right • Upper and lower parallel arms • Tool free blade changing • Upper arm lift is ideal • Easy access controls • Large 12" x 18 1/2" table surface • Throat: 16", Max. cutting depth: 2" • Standard 5" straight blades Includes operation manual and 2-year warranty. 847194 . ............................ $574.99 148839 stand.................... $116.99

• 21/2" dust port •Extended drum shaft for mounting keyless chuck •Sandpaper, keyless chuck and double mops sold separately Visit Woodcraft.com for a complete offering of SAND-FLEE® sandpaper and sanding accessories. 149212 ..............................$699.99 410112 1/2" keyless chuck .$26.50 410110 stand.....................$154.99 835387 fence.......................$80.99 • 9" wide, CNC- machined aluminum drum, hook & loop fastener • 9"–18″" sanding width • 21/2" dust port • Sandpaper, keyless chuck, fence, and double mops sold separately 150101 . ..............................$399.99 150131 sand pk. 120, 180, 220 grit, . 3" x 10 yards, 3 rolls........ $39.99

GENERAL Bench Top 14" Drill Press

Model 75-030 M1* ½• 1/2 HP, 120V, 60Hz industrial rated motor • 31/8" quill stroke • 5/8" chuck capacity • Cast iron, precision machined 5-step pulleys • 5 speeds: 280 - 3,000 RPM • Built-in work light (bulb not included) • Rapid-adjust drill stop Includes bonus laser guide and chuck guard • 106 lbs. 841427 . ..............................$339.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


Pneumatics Power Tools B A PORTER-CABLE Pneumatic Nailers & C Staplers

Porter-Cable’s pneumatic line is built tough! All guns have strong & light weight die-cast bodies, special hardened driver blades and quick release nosepieces for easy jam clearance. Each kit includes a gun, case, oil, 1/4" connector plug and wrenches. (A) Narrow Crown Stapler Kit, Model NS150B. Oilless. Uses standard 18 gauge, 1/4" narrow crown wire staples from 1/2" to 11/2" long. Kit includes 1,000 staples. 149164 D/S........................$109.99 (B) Brad Nailer Kit, Model BN200B. Oilless. Uses 18 gauge brads from 3/4" to 2" long. Kit includes 1,000 brads. 149165 D/S..........................$99.99 (C) Pin Nailer Kit, Model PIN100. Uses standard 23 Ga. pins from 1/2" to 1". Kit includes 2,000 3/4" pins. 820946 ..............................$124.99

GREX Headless Pinners

Model P635 - 13/8", Model P645 - 13/4", Model P650 - 2". The Grex industrial strength 23 gauge Headless Pinners utilize patented magazines that eliminate the need to adjust for different fastener lengths. The powerful motors will drive fasteners from 3/8" up to 13/8" (P635) or 13/4" (P645), or 2" (P650) with ease. The compact, lightweight, slim profile is very maneuverable and features a rear exhaust with built-in silencer. Weight: 2.68 lbs. (1.2 kgs.), (3.25 lbs., P650) operating pressure: 60 - 100 psi, air inlet: 1/4" (6mm) NPT male plug.

O-Ring Kit 149856 fits P635.................. $9.99 149857 fits P645, P650..... $12.99

GREX 23 Gauge Headless Pins

21 Gauge Brads & Pins

23 Gauge Headless Pins 2,500 per Box 151224 3/8"............................ $6.99 151225 1/2"............................. $7.99 151226 5/8"............................. $7.99 151227 3/4"............................ $8.99 151228 1".............................. $9.99 151229 13/16"...................... $13.99 151230 13/8"........................ $14.99 151231 11/2"........................ $16.99 151232 13/4"........................ $19.99 151233 2"............................ $23.99 10,000 count boxes 147855 3/8"............................ $8.99 836088 1/2"............................ $9.99 836090 3/4"..........................$11.99 836092 1"............................ $13.99 148940 13/16"...................... $19.99 836095 13/8"........................ $16.99 836096 11/2"........................ $19.99 836097 13/4"........................ $23.99 838672 2".............................$27.99

The Freeman 18 Gauge, 2” Brad Nailer is perfect for those woodworking projects that need a higher degree of fastening strength. The lightweight ergonomic design provides a good feel for the perfect balance during operation, operates on 60-100psi and utilizes Teflon® O-rings to insure a longer life and trouble free operation. Uses standard 18 gauge brad nails from 3/8" to 2". Includes 7 year limited warranty, reversible belt hook, goggles, oil, and wrenches. 845003 . ............................... $59.99

Perfect for those smaller projects like decorative trim, small picture frames and cabinetry trim. The lightweight ergonomic design provides a good feel for the perfect balance during operation. Operates on 60-100psi and utilizes Teflon® O-rings to insure a longer life and trouble free operation. Uses standard 23 gauge pins: 1/2", 5/ ",3/ ", 7/ " and 1". Includes 7 year 8 4 8 limited warranty, reversible belt hook, goggles, oil, and wrenches. 845001 . ............................... $59.99

WoodRiver® 1.5 HP Air Compressor

Retractable Reel 39' Polyurethane Air Hose

Driver Kit 149854 fits P635................ $34.99 149855 fits P645, P650..... $48.99

EZ-Fasten 21 Gauge Pin & Brad Nailer

500 pieces each of 13/16", 13/8", 11/2", 13/4" & 2" Pins. For use in Grex Model 650, 23 Gauge, 2.5K Per Box. 151234 . ................................ $15.99

FREEMAN 23 Gauge, 1" Micro Pinner

836278 ...........P635-13/8" (shown) .............................$199.99 836086 P645 - 13/4"......... $279.99 838673 P650 - 2" . ...........$309.99 149858 No-Mar tips...............$8.99

Brad Nailer is ideal for projects that are too big for a standard 23 gauge pinner and too small for an 18 gauge brad nailer – picture frames, moldings, or just about any detail work that you could think of. The MBP30 accepts 21 gauge headed brad nails or 21 gauge headless pins ranging from 1/ " to 13/ ". Includes carrying case 2 16 and instruction manual. 149121 . ..............................$129.99

Model MBP30. This pneumatic nailer, with trigger safety, incorporates the best of both worlds- the strength and versatility of a brad nailer with the inconspicuous fastening capability of a pin nailer. A 21 gauge Pinner/

FREEMAN 18Gauge, 2" Brad Nailer

Packs of 5,000 145771 1/2" pins...................... $7.50 145773 5/8" pins...................... $7.50 145775 13/16" pins.................. $9.99 145777 1" pins....................... $9.99 145779 13/16" pins...............$11.99 145772 1/2" brads................... $7.50 145774 5/8" brads................... $7.50 145776 13/16" brads............... $9.99 145778 1" brads.................. $12.50 145780 13/16" brads.............$12.99

Brads & Staples

For Porter Cable, Senco, Accuset and most popular brands. Brads and staples are 18 gauge. 845367 3/4" brad, 1,000........ $2.99 813327 11/4" brad, 1,000..... $3.99 846295 2" brad, 5,000........$16.99 845368 2" brad, 1,000..........$5.50 846306 11/2" staples, 5,000.$19.99

Stainless Steel 23 Gauge Pins & 18 Gauge Brad Fasteners

These high quality stainless steel nails are perfect for projects that are exposed to weather or in highly humid areas.

Specs: • 1.5 HP, 11 Amp.,120V, 1 ph oil lubricated pump • 2 gallon tank • 115 PSI operating pressure, 125 PSI max.pressure 2.76 SCFM @ 40 PSI, 2.30 SCFM @ 90 PSI • ASME safety valve • Thermal overload protector and reset • Durable enclosed air filter • Air pressure regulator and easy to read pressure gauges • 1/4" universal one-touch quick-coupler Accessories: 1/4" x 25 ft. coil air hose, 1/ " male coupling, tire inflator, air 4 blower with adaptor, nozzle and needle inflators. 150991 . .............................. $119.99

FLEXEEL 25' Polyurethane Hose

Extremely lightweight and tough, for either outdoor or indoor use. T h e 5/1 6 " diameter hose retains its flexibility, rated at -40°F to +165°F at working pressure to 200 PSI. Includes 1/4" industrial quick disconnect fittings and strain relief ends. 145766 ................................$35.50 18 Gauge Stainless Steel Brad Nails Packs of 500 842786 1/2"..........................$27.99 842787 1"........................... $32.99 842788 11/4"....................... $34.99 150141 11/2"....................... $36.99 150142 2"........................... $38.99

This retractable polyurethane air hose reel eliminates the hassle of dragging air hoses out and then having to recoil them for storage. Mount the hose reel in your shop or garage and you will always have a high quality polyurethane air hose at your finger tips and storing the hose use is a snap. Simply retract the air hose into the reel and it is neatly store, ready and waiting for use. The 1/ " diameter hose retains its flexibility 4 even in the coldest of conditions, is rated at -40° F to +165° F, and for a working pressure of 200 PSI. 150316 . ................................ $69.99

FLEXEEL 15' Coil Polyurethane Hose

A great alternative to long troublesome air hoses. This compact, tightly coiled hose is extremely lightweight, flexible and tough, ideal for outdoor contractor use, indoor industrial use or the home hobbyist looking for high quality versatile air hose. The 1/4" diameter hose retains its flexibility even in the coldest of conditions. Rated at -40°F to +165°F with a working pressure of 200 PSI. 149029 . ................................ $26.99 23 Gauge Stainless Steel Pins Packs of 1,000 150149 1/2"......................... $14.99 150150 3/4"......................... $19.99 150151 1"........................... $20.99 150152 11/4"....................... $23.99 150153 11/2"....................... $29.99 150154 2"........................... $32.99

Helping You Make Wood Work ®

11


Dust Collection Power Tools

Table-Top Dust Collector

The Table-Top Dust Collector picks up dust and chips at the source with its huge 123/4" tall x 16" wide opening that funnels to a 4" dust collection fitting. Also works with sanders, miter saws, or radial arm saws. 10" deep, ABS plastic. 144614 .....................................................$22.99

F

A

L

B

N M

C

J G

E D

Dust Collector Accessory Kits

Starter Set is designed for single machine hook up. Contains 6" jointer, universal, and table saw dust hoods, one 4" x 10' dust collector hose, and two stainless steel clamps. 129486 .................................................... $32.99 Multiple Machine Set for multiple machine hook ups. Contains 6" jointer, table saw, and universal dust hoods, floor sweep, 4" Y connection, four 4" ABS blast gates, ten stainless steel 4" clamps, and two 4" x 10' flexible dust collector hoses. 129487 .....................................................$71.99

H I

Q O

21/2" Clear Pipe Dust Collection Kit

Connect up to five machines to a dust collector or shop vac. Kit contains eight 36" x 21/2" O.D. clear pipe sections, four “T” connectors, twenty pipe connectors, five blast gates, eight 45° elbows, four 21/2" O.D. x 2" elbow connectors (to create up to four 90° turns as needed), one 4" to 21/2" reducer, and ten metal mounting brackets. For use with dust collectors or shop vacs with a 100 CFM rating. 142607 ..................................................... $81.99

K

P

R

T

U

V

S

W

Dust Extraction Fittings

These economical fittings will help you to build a high performance dust extraction system for your shop. Made of ABS plastic (except for the aluminum blast gate), these fittings are designed to stand up against the abrasive nature of saw dust and wood fiber. The floor sweeper collector (24" x 7") is designed to be taped to the floor in a convenient spot where you can sweep shavings into it. Because of the danger of static electricity involved with dust collection we highly recommend the book Dust Collection Basics be read prior to any installation. 85O09 (A) 12" x 12" table saw fitting..........$7.99 85O14 (B) 8" x 8" jointer fitting.................. $5.99 85O16 (C) 4" Y fitting...................................$7.99 144930 (D) 4" x 4" x 21/2" Y fitting............... $5.99 85U65 (E) 4" to 21/2" reducer fitting . ....... $5.50 144534 (F) 4" to 21/4" reducer fitting . .......$4.99 85O15 (G) 4" T fitting.................................. $7.99 85O11 (H) 4" elbow.................................... $6.99 85O12 (I) 4" splice...................................... $4.99 140259 (J) 4" hose to 4" O.D. quick-disc. .$6.50 85O07 (K) 4" aluminum blast gate........ $12.50 85O10 (L) floor sweep collector................. $9.99 85O13 (M) 21/2" router fence dust fitting.$4.99

(N) 4" ABS blast gate..................... $5.99 21/2" hose hangers (5)................... $2.50 4" hose hangers (5)....................... $5.29 (O) 6" to 1" universal adapter.........$7.99 (P) 4" to 1" multi-step reducer....... $4.99 (Q) universal tool adapter.............. $9.99 (R) 21/2" aluminum blast gate.....$10.99 (S) 4" 45° elbow............................ $5.99 (T) 4" swivel fiting........................... $9.99 4" flanged inlet fiting..................... $3.99 (U) ABS quick-conn. thread gate....$7.99 (V) ABS blastgate 4" hose to 4" O.D....... ...................................................... $5.99 149576 (W) self clearing 4" blast gate....... $8.99 85O17 Dust Collection Basics . ................$7.99 4" Universal Fitting. You can use this dust collection fitting to hook your 4" diameter hose up to any flat surface. The 45° angled opening promotes flow and provides a solid area to clamp the hose. The flat portion of the 53/4" x 51/4" fitting has 3/16" dia. holes at each corner for easily attachment to any surface. 144654 ........................................................ $4.99

85O06 144770 144771 140791 151193 142173 149578 149579 146489 152674 149577 142767

Trash Can Cyclone Lid

With this lid and a common trash can you collect the larger and heavier shavings and dust before they reach your impeller and dust collection bags. A foam gasket provides a superior seal and an elbow fitting under the inlet side induces a cyclonic air flow. Accepts 4" hose. Fits standard 30-gallon metal trash cans. 143290 ............................ $28.99 Mini Dust Collection Separator. For use with shop vacs. Similar to above, but fits on a 5-gallon bucket. Inlet and outlet accept a 21/2" hose. ABS plastic. 143868 5-gallon separator........................$20.99

12

B Quick Disconnect Fittings

A

Easily move your portable dust collector without loosening and tightening hose clamps. with these quick disconnect 4" fittings and an airtight friction fit. 143660 (A) dbl. ended 4" to 4" O.D. fitting.$4.99 150907 21/2" hose to 4" O.D. fitting............ $4.99 142767 (B) ABS blastgate 4" hose to 4" O.D....... ...................................................... $5.99

Credit Card Orders: 800 225-1153

4" Poly Blast Gate Bracket

These brackets hold any of the 4” plastic blast gates listed below at a convenient location making operation so simple you will use your dust collector each and every time you use a tool. The brackets can be mounted vertically or horizontally and a channel in the bracket captures the flange of the blast gate so the gate can be operated from either side or the front. Slots are provided to permanently mount your blast gate. Blast gates sold separately. 150513 bracket for 4" poly blast gates...... $3.99

Free Technical Advice: 800 535-4486 www.woodcraft.com


Dust Collection

Heavy-Duty Clear Dust Collection Hose Clear Dust Collection Hose

Ever wonder where that blockage is in your dust collection system? There’ll be no more guessing or needlessly pulling your system apart when you install this see-through hose. End your frustrations by upgrading your system with our clear, flexible, kink free, wire reinforced hose. 10' lengths, 2 diameters. 127761 21/2" diameter hose..................... $21.99 127760 4" diameter hose.......................... $31.99 Wire Hose Clamps Each 10+ 85U66 4" wire clamp (1).......... $1.99........ $1.79 140606 21/2" wire clamp (1)...... $1.99....... .$1.79

A

Polyurethane dust collection hose offers the maximum combination of flexibility and abrasion resistance across a temperature range of -65° to 225°F. Reinforced with a spring steel wire helix for excellent compressibility as well as cut, gouge, and chemical resistance. Designed to handle the rigors of a portable dust collection system as well as permanent installations. 10' lengths. 147881 21/2" diameter................................$29.99 Wire Hose Clamps Each 10+ 85U66 4" wire clamp (1).......... $1.99........ $1.79 140606 21/2" wire clamp (1)...... $1.99........ $1.79

B Light-Duty Semi Clear Dust Collection Hose

Dust Collection Rigid Flex Hose

Bend it, turn it, twist or pull it to collect airborne dust at the source. The hose can be compressed to 12" or extended to 36" all the while holding its shape. Come up with creative uses for it in the shop, especially on your bandsaw, scrollsaw, drill press or sander. Made of tough, rigid polypropylene plastic, for everyday shop use. 149580 (A) 21/2" x 36"................................. $15.99 149581 (B) 4" x 36"..................................... $19.99

Flexaust hose provides an economical solution for central and portble dust collection systems. Semiclear material offers a constant view of ship and dust flow so obstructions are visible. This lightweight, polyurethane hose is reinforced with a polyurethane helix and has smooth interior walls for efficient air flow. 10' lengths. 151249 4" diameter................................... $21.99 151250 21/2" diameter................................$15.99 Wire Hose Clamps Each 10+ 85U66 4" wire clamp (1).......... $1.99........ $1.79 140606 21/2" wire clamp (1)...... $1.99........ $1.79

B

A

21/2" Rigid Flex Dust Source Set

Hose Clamps

(A) Keyed Hose Clamps have a thumb screw that allows you to quickly tighten or loosen them without a screwdriver or wrench. Each 10+ 141933 21/2" clamps (2)............ $3.99........$3.59 141934 4" clamps (2).................$4.99........ $4.49 (B) Quick Release Band Clamp. Lift to release this stainless steel band clamp and slide it to adjust. Each

10+

141397 4".................................. $1.99........ $1.79 150789 21/2".............................. $1.99........ $1.79 Standard Hose Clamps. Each 10+ 127762 21/2" clamp (1).............. $1.50........$1.35 85O08 4" clamp (1).................. $1.50........$1.35 Wire Hose Clamps. Each 10+ 140606 21/2" wire clamp (1)..... $1.99........ $1.79 85U66 4" wire clamp (1).......... $1.99........ $1.79

Collect airborne sawdust and small wood chips at the source with the Rigid Flex Dust Source Set. Two different nozzles and hose end fittings convert the 21/2" flexible polypropylene plastic hose into a convenient system for collecting the fine dust produced by scroll saws, band saws and drill presses. 21/4" O.D. hose end fittings mate with most shop vacuum inlet ports. Includes one rectangular nozzle, one tapered nozzle, two hose end fittings and one 12" (expandable to 36") 21/2" rigid flex dust collection hose. 150512 ....................................................... $19.99

Dust Collection Grounding Kit

Make your plastic dust collection system safer with the use of a grounding kit. Kit includes 50' of braided 14 gauge copper wire, grounding screws, wire nuts and terminal ends for complete installation. 812502 ......................................................$17.99

Mr. Nozzle Shop Vac/Dust Collector Tool Kit

The durable 12' high density polyurethane hose extends your cleaning reach so you no longer have to “tug” your vac around by the hose and deal with the frustration of becoming entangled in extension cords or tipping over. Mr. Nozzle is designed to fit all standard shop vacs that accept a 21/4" OD fitting. With a 4" to 21/2" (21/4" ID) reducer (85U65) this kit is also adaptable to 4" dust collectors. Kit comes with a crevice attachment for cleaning small areas and tight corners, a claw attachment for wide area cleaning, and hose adapter for attaching both tools to the hose. 125963 ....................................................... $39.99

A B

EZ Squeeze Dust Collection Hose Clamps

There is no easier way to connect dust collection hoses to fittings or machine ports than these EZ Squeeze Hose Clamps. Choose between SingleLoop (SL) and Double-Loop (DL) design in two sizes. The Single-Loop is easier to squeeze for temporary connections while the Double-Loop grips tighter on hose containing an internal wire. Two per pack. 5+ 149998 SL 21/2" EZ ..................... $3.99..... $3.59 149999 DL 21/2" EZ ...................... $4.99..... $4.49 150000 (A) SL 4" EZ ..................... $4.99..... $4.49 150001 (B) DL 4" EZ...................... $5.99..... $5.39 Need more dust collection hose? Choose from economical black GPE hose, standard clear PVC hose or heavy-duty clear polyurethane hose. Both clear hoses have internal wire. 127761 21/2" clear...................................... $21.99 147881 21/2" x 10' HD clear hose...............$29.99 127760 4" x 10' clear.................................. $31.99

X-Treme Tape Duct Hose Wrap

Dust collection systems inherently leak where clamps secure hoses to duct and fittings. X-Treme Tape Duct Hose Wrap seals those joints and repairs punctures in expensive dust collection hose. It’s better than ordinary duct tape because there is no adhesive; it simply sticks to itself, there is no residue after removal and it leaves joints and hoses clean and free of sawdust. 11/2" x 25 foot roll.

Each

4+

149888 . ...................................$17.99.....$16.19

Helping You Make Wood Work ®

13


Dust Collection

iVac Automated Vacuum Switch

The Intelligent Vacuum Switch eliminates the distraction of turning on and off a dust collection system while you are operating potentially dangerous power tools. Compact and lightweight, it mounts to the wall for convenient clutter free use. Three modes of operation: Auto – Off – On. Turn-On delay avoids the two power surges occurring at the same time. Turn-Off delay clears work area of remaining debris after tool has stopped. Two input power cords permit operation from two separately protected circuits when the combined load from tool and vacuum exceeds 15 Amps. Both power cords are individually protected with 12 Amp circuit breakers. The iVac switch has been put through rigorous testing for ETL safety approval. 149950 .......................................................$44.99

Dust Collector Remote Control System

It never fails, every time you need to start your dust collector you’re on the other side of the shop. Our remote control will give you the convenience of being able to turn on your dust collector from as far away as 50 feet. It even works through walls! Simply press the “On”/”Off” button on the key fob and your dust collector responds accordingly. Installation is easy plug the remote base unit into a power source, plug your dust collector into the base unit, and set the collector’s switch to “On”. The base unit includes a 6-foot cord and mounting tabs so it can be mounted to the wall. The key fob includes batteries and a quick-latch key chain to keep it handy. The 110V unit will operate dust collectors up to 11/2 HP, the 220V unit up to 3 HP. 145475 110V remote................................. $68.99 145476 220V remote.................................$72.50 146129 extra remote................................. $21.99

ONEIDA Air Systems Dust Deputy

A

Oneida’s Dust Deputy will transform your shop vacuum into an effective dust collection system. Extremely efficient, cyclonic preseparator filters 99% of sanding dust with only 1% going into the vacuum; this extends the life of your shop vacuum and filters. Metal unit with 10-gallon steel drum has a cyclone constructed of heavy-gauge steel, assembled with continuous welded seams B with 2" inlet & 2" outlet and one set of hose adapters for connecting a typical shop vacuum to the cyclone outlet. Molded plastic kit includes a molded poly cyclone separator with two 5-gallon plastic buckets, fitted lid and hardware to outfit a portable shop vacuum. Use the molded DIY poly Dust Deputy as a cyclone separator to make your own shop vacuum driven dust collection system. Note: The Dust Deputy is not for use with highly explosive dust. 149161 (A) metal dust deputy kit...............$199.99 149951 molded plastic dust deputy kit.....$99.99 149952 (B) DIY plastic dust deputy...........$59.99

ONEIDA Ultimate Dust Deputy II

Combine the Oneida Ultimate Dust Deputy II with the quality and performance of a Festool CT Dust Extraction System to create the ultimate three stage vacuum system. Kit Includes: Industrial Static Dissipative, 9 Gallon container, Dust bagger, plastic bag hold-down system, static dissipating cyclone separator, 6 feet of static dissipating hose with static dissipating cuffs, hose fittings and instruction manual. 151175 .................................................... $249.99

Dust Hood With Stand

Capture dust at the source and send it directly into your dust collection system. With an adjustable stand and articulating head, you can easily position this hood at any machine in your shop. Sanding or power carving? Set it up right beside your work area for a dust free environment. The steel pedestal adjusts from 27" to 47" and locks in place. The hood is made of durable plastic with a 153/4" wide and 113/4" high opening and a 4" vacuum hose connection. 147113 ..................................$74.99

It's Easy To Get To Woodcraft

Horsehair Brushes & Giant Dust Pan Brushes

Features lacquered hardwood handles with horsehair A bristles. The standard style B Bench Brush has a bristle base of 21/2" x 9" with 21/2" long bristles. The Draftsman Brush has a bristle base of 1/2" x 73/4" with 2" long bristles. Aluminum Dust Pans. Our Giant Dust Pan is a huge 17" wide, enough to cover the full width of a standard push broom. The Standard Pan is 12" wide. Both have sturdy riveted handles and are built to handle typical shop abuse. 111152 bench (A).......................................$10.99 111151 draftsman (B).................................. $7.99 11S34 giant aluminum dust pan............ $15.99 144874 standard aluminum dust pan...... $10.99

21/2" Vac & Dust Collection Accessories

Dust collection system for bench top tools using your shop vac, or use the 4" to 21/2" reducer and outfit your 4" system with a 21/2" hose and accessories. Union fitting is required to connect hoses together, or to other fittings. 128680 21/2" x 14" floor tool......................... $8.99 128681 21/2" x 20" straight wand.................$7.99 128682 21/2" x 14" crevice tool.................... $4.99 128683 21/2" dusting brush..........................$7.99 128685 21/2" hose end fitting....................... $4.99 144541 21/2" hose union fitting................... $3.99 144655 11/2" to 21/4" adaptor....................... $4.99 150758 21/4" union hose fitting................... $2.99 128689 21/2" x 10' hose with end fittings .$15.99 128690 21/2" x 25' shop vac hose.............$28.50 128747 21/2" ABS blast gate........................ $4.50 144281 21/2" tee fitting................................. $4.99 144282 21/2" “y” fitting.................................. $3.99 144770 21/2" hose hangers (5).................... $1.99 150757 21/2" flanged inlet fitting................. $2.99 Shop Vac Hose Kit contains one 10' hose with end fittings, two straight wands, 14" floor tool, dusting brush and crevice tool. 128691 Save Over $10! .......................... $42.99

1 HP Portable Dust Collector

For small shops, it won't take up valuable space. This unit comes pre-wired for 110V operation and features a standard 20 gallon nylon bag. Taiwan. 129594 .................................................... $209.99 129843 replacement bag........................... $13.99 129844 5 micron bag................................. $27.50

Specifications:

Motor .................................................110V Air Flow - 4".................................450 CFM Static Pressure at 4".................... 2.76 Hg Hose connections.......................... one, 4" Stage................................................ single

Floor Stand Suction Head

Po s i t i o n t h i s a d j u s t a b l e Suction Head close to your router, drill press or lathe and pick-up all of the airborne dust! Head adjusts from 24" to 48", swivels 360° and has a 2" x 13" opening. Attaches to standard 4" hose (not included). Castiron base. 812399..........................$72.99

Call, Click, or Walk-in 14

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Dust Bee GoneTM

D

JET Air Filtration System

Model AFS-1000B • 3-Stage Filtering - 1 micron • Remote Control & Timer • 3 speeds – 550,702 & 1,044 CFM • Disposable Outer Filter – Washable • Filters air 12 times an hour for a 20' x 20' x 8' shop 815488 . ..................................................$339.99 818941 electrostatic filter .......................$54.99 818943 charcoal filter............................... $57.99

JET 1.5 HP Dust Collector With Canister

Model DC-1100CK* • Motor 115/230V, 1.5HP, 1PH • 2-Micron Canister • 1,100 CFM of air flow and 8.9" of static pressure • Two 4" ports or one 6" port • Overall dimensions 37" x 20" x 79" Shipping wgt. 120 lbs., regular shipping rate plus $55 for excess weight. 821769 D/S............................................... $629.99

JDS 1.5 HP Dust Force

The Dust Force features a powerful 1.5HP 115/230V motor for 1,250 CFM of air but manages to operate at a quiet 77 dB. • Includes: 1 Micron upper filter bag along and standard 42 gallon clear plastic bag. • 4" plastic Y- fitting with cover, over a steel 6" inlet with integral grate to protect the impeller. • 76" H x 30" W x 36" L Ship. wgt. 105 lbs., regular shipping plus $55 for excess weight. 144912 . ..............................$374.99

B A MSA Safety Essentials Half Mask Respirators

C

These respirators feature soft, comfortable, great fitting facepieces for superior comfort and protection, built-in exhalation valves, low profile replaceable cartridges for better vision, and come in recloseable packaging for easy and safe storage. The Toxic Dust Respirator traps over 99.97% of toxic dust including lead, asbestos, and Hantavirus. Meets the latest US government respirator standards (P100 Class) and OSHA and NIOSH requirements. The Multi-Purpose Respirator provides further protection from paint fumes, (except urethane paints), pesticides, lead fumes, ammonia, asbestos, and toxic dusts. Meets OSHA and NIOSH requirements. Cartridges are interchangeable between respirators. Toxic Dust Respirator 141621 (A).................................................$38.99 141622 (B) repl. cartridges (2)..................$17.99 Multi-Purpose Respirator 141623 (C)................................................ $49.99 141624 (D) repl. cartridges (2)................ $20.99

The unit is 25" long and 13" in diameter and weighs only 15 pounds, to easilt fit where dust is being produced. The induction motor quietly moves 235 cfm of air to filter dust as small as 5 micronsand will filter 290 square feet every 10 minutes. Remove the end grill for filter maintenance of the included 2-stage filter system. The small size will fit between joists in a basement shop. Includes a 12' cord, and rocker switch. The replacement filter kit includes a foam sleeve secondary filter and cartridge filter. 143300 ................................................... $119.99 142211 replacement filter kit...................$22.99

The Best Nuisance Dust Mask! Made from woven polyester with heavy 3/4" elastic straps with hook and loop closure on the bottom and plastic quick release buckle on the top, this mask forms to all face shapes and even works with beards. Easy to breathe through and it’s hand washable. With proper care the Dust Bee Gone Mask can last for years. Three sizes include Medium (woman/small men, neck size 14-15), Large (most men, neck size 15-18), and XLarge (men’s neck size 18.5-26). 141104 medium - blue edging.................. $43.99 141152 large - maroon edging.................. $43.99 141153 x-large - green edging................... $43.99

POWER MASK Positive Pressure Dust Mask

Protect yourself from nuisance dust with this effective positive pressure cartridge mask that is not only comfortable, but quite affordable. The Power Mask is lightweight and because it is positive pressure doesn’t have to be pulled tight on your face. The small 2-speed fan built into the front of the mask pulls air through the filter, continously providing clean, cool air. The quiet motor runs on 4 AA batteries (not included) and has a handy belt clip, or the mask can be used as a non-powered respirator. Three dust cartridges and 10 pre-filters included. 147633 powered respirator......................$69.99 147634 repl. dust cartridge........................ $3.99 147635 repl. pre-filters (10)........................ $2.99

FASTCAP® MXV Pocket Dust Masks

Everything you want in an N95 rated, non-toxic dust/ particle mask. From the exhalation valve to the extra foam padding on your nose, this mask is built for comfort and performance. Each mask is individually sealed which makes them perfect for home, shop and travel in case you need to take one with you. Sold in boxes of 10. 836875 . ........................................................$17.99

MSA EXC Hearing Protectors

EXC’s, rated at NRR 24, are the best muff style, passive hearing protectors in the MSA line. The unique injection molded inserts provide excellent noise attenuation and maximum comfort, while the patented adjustable headband ensures a good fit with no “hot spots”. It is this combination of performance and comfort that allows these muffs to stand alone. Certified to AS/NZS 1270. 150947 . .......................................................$29.99

Shop-vac Air Cleaner

Safety

MSA AM/FM MP3 Hearing Protector

21dB NRR muffs with a built in AM/FM stereo radio and MP3 Jack and a bass boost switch. Listen to your favorite tunes or ball game while you work in the shop or the yard. Includes 2, AA batteries and an MP3 cord. 150261 ..........$69.99

A

B

C

D

FASTCAP Magnifying Bifocal Safety Glasses

Read small marks with ease with Fastcap’s Magnifying Bifocal Safety Glasses. When 64ths seem to merge together on your rule but your vision is otherwise near normal these bifocal magnifiers can improve accuracy dramatically. They provide uncorrected vision in the upper viewing field, and correction for presbyopia (lacking ability to focus on nearby objects) in the reading section. Designed by a cabinetmaker with adjustable frames, anti-fog coated lenses, and a range of bifocal powers, fit and comfort are assured. Feature shatterproof wrap-around lenses with UV protection and reinforced temples. ANSI rated Z87.1 147866 (A) +1.5 diopter...............................$7.99 147867 (B) +2.0 diopter...............................$7.99 147868 (C) +2.5 diopter...............................$7.99 147869 (D) +3.0 diopter...............................$7.99

Helping You Make Wood Work ®

15


Safety

TREND Airshield

The Airshield is a battery powered dust mask that provides excellent protection from the inhalation of harmful dust while at the same time protecting your eyes and face from flying debris. Standard run time is 4 hours with the included battery, but because the Airshield has 2 battery compartments, a second battery can be installed that will permit up to 8 hours of continuous use. The Airshield comes complete with battery charger, THP/2 fine filter, pre-filter, airflow indicator, visor overlay and plastic carry bag. Airflow minimum 4.94 CFM, maximum 6.36 CFM. Weight is only 26 oz. Eye protection to BS EN 166:1995, low energy impact and respiratory protection to BS EN 146 THP2. 145203 airshield..................................... $320.00 145260 THP/2 filter...................................$39.00 147551 THP/2 filter (3 pack).................... $79.00 145261 pre-filter (3)...................................$22.00 145262 visor overlay (10)..........................$34.00 145263 extra battery pack........................$35.00

TREND Airshield PRO

Includes FREE Trend Airshield Earmuffs, A $52 Retail Value!* Features twin filters with 400% more filtration area than the standard Airshield providing superior protection from the inhalation of harmful dust. The motor is positioned away from the sensitive area of the forehead to reduce noise and irritation. The Ni-MH battery provides 8 hours of use and is located in the rear of the helmet for optimum balance and comfort. Providing up to 7.06 CFM of filtered air flowing across your face keeps you feeling fresh and cool and prevents the visor from fogging. The Airshield PRO comes complete with battery, battery charger, airflow indicator, clear visor overlay, and plastic carry bag. Weighs just 2.21 lbs. Provides eye protection to ANSI Z87.1 and respiratory protection NPF50 to EN 12941 THP2. PRO clip on ear muffs for hearing protection rated at NRR 22. 152709* Airshield PRO w/clip on muffs ............... .A $451 Value, Save Over $90! $359.00 149030 Airshield PRO ........................... $399.00 149031 THP2 filters (2).............................$53.00 149032 visor overlay (10)..........................$32.50 149033 extra 8-hour battery..................... $70.00

SafetyGate Professional

If you have ever forgotten to turn your power tool “off” following a power interruption you know how dangerous it can be when power is reapplied. Patented sensor technology of the SafetyGate™ senses that your power tool is still “on” and will not allow the tool to be energized following recovery from a power interruption. Visually, SafetyGate warns you of this potentially dangerous situation with an illuminated yellow LED light, while the “gate” stops the flow of electricity, preventing a dangerous restart. When you are ready to begin working again, simply turn the tool “off” and then back “on” to release the gate and resume normal use. The SafetyGate can be applied to any power tool and in essence becomes the tool’s new plug. 151006 . .......................................................$23.99

Bionic Face Shield

This revolutionary design combines superior protection and all-day comfort. Maximize your protection, vision, and comfort. This Face Shield provides extended top-ofhead coverage, superior optics and full face visor, comfortable foam back pad, and built-in chin protection. The easy-to-set ratcheting headgear locks into place for a secure fit; headgear adjusts to your choice of 4 visor angles and 2 depth adjustments so it can be adjusted to be comfortably worn with most goggles and respirators. It’s lightweight and comfortable for extended wear, and visor replacement is quick, easy. The polycarbonate visor features both anti-scratch and anti-fog coatings. Meets ANSI Z87.1 and CSA Z94.3 standards. 147814 . .......................................................$54.99 147815 replacement visor..........................$28.99

C

B

A

Heavy Duty Push Sticks protect you and your blades cutting edges. 3/4" wide by 123/8" long, features two push notches for ease of use and extended life.

Five-Piece Safety Kit

Most power tools come with one or two pieces, but over time those pieces wear, and deteriorate. Our kit includes two pushblocks, two pushsticks and a featherboard of sturdy plastic, designed to last. These safety orange aids work well with table saws, router tables and jointers. 143624 . .......................................................$24.99

16

2+ 

127455 (A) .................................... $5.99.....$5.39 Push Blocks keep hands and fingers safe from baldes and cutter heads. 3" x 57/8" blocks have anti-slip bottoms to firmly hold your workpiece. 111170 (B) set of 2.......................................$8.99 16" Push Block provides positive two hand control for medium length (10" - 20") stock.               

Each

2+ 

111171 (C)...................................... $9.99.... $9.00 Safety Set includes one push stick, two push blocks and one 16" push block. 125416 complete set Save Over $5! . .... $19.75

Credit Card Orders: 800 225-1153

B

Durable Shop Aprons

Leather Shop Apron. Nothing stands up to abrasion and abuse in the shop like leather, and nothing looks and feels quite as good either! Our one-piece apron, weighing in at 24 oz., measures a full 22" wide and 34" long and is cut from premium side split gray leather. Kevlar® thread is used throughout so you’re assured the seams will never break and rivets are unnecessary. Adjustable cotton straps crisscross your back and a quick-release buckle at the waist is easy to operate. 140937 (A)....................................................$29.99 Rugged Blue Denim Workshop Apron. Wrap- around design keeps loose clothing from getting caught in machinery and protects clothes from being soiled by finishing materials. Two pockets provide ample room for pencils, rules, and tape measures. 37" long. 15L03. (B)..................................................... $17.99

Adjustable Face Shield

A good face shield is only protection your face has against flying debris or tools. Most agree it’s only the first level for your eyes with the second being a good pair of safety glasses. Our shield is ANSI approved with an 8" x 15" x .06" thick, high impact polycarbonate lens and a fully adjustable locking headpiece. 150706 .................................................... $21.99 152164 replacement visor.........................$9.99 151051 black helmet sweatbands (2)......$3.99

Anti-Vibration XT Gloves

Safety Accessories For Table Saws And Jointers

Each

A

These heavy duty vibration reducing gloves feature 3.0 mm memory foam strategically placed throughout the palm and thumb along with a 360° wrist wrap. These gloves are built from a water and oil resistance synthetic base layer, then double-stitched with bonded nylon thread for extended life. Other features include a terry cloth thumb pad for wiping moisture and raised double knuckle protection. 151071 medium...........................................$24.99 151072 large................................................$24.99 151073 X-large ...........................................$24.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Tool Accessories Advanced Micro Jig GRR-Ripper System

KREG Multi-Purpose Push Stick

The Multi-Purpose Push Stick from Kreg includes added features that make each cut safer and more convenient than ever before. The push stick is molded of light-weight yet durable resin with an ergonomic handle that places the hand in proper position for control and safety. Included in the push stick is a removable, locking depth gauge that makes measurements easy and precise. The built-in storage magnet lets you store it anywhere and even has built-in pencil holder! 148974 ........................................................$17.99

control by spreading downward pressure The critically acclaimed precision over the whole width of the Gripper GRR-Ripper pusher system will body. The Deflector/Connector keeps forever change operating a table flying wood chips at bay or acts as saw. Gain confidence to an extended blade guard for the make ultra-thin cuts with Gripper. This accessory can consurgical precision and nect two Grippers together when control to make the exact working larger stock. Deflector/ cut you want. GR200 includes Connector requires Handle Bridge main body, handle, 1/4" side leg, 1/ " side leg, center leg, adjustable to be installed. 2 spacer, stabilizing accessory plate, balance support 820434 Model GR200................. $79.99 and comprehensive user’s manual. Add the 1/8" Side 845406 1/8" side leg accessory.................. $13.99 Leg Accessory to your GRR-Ripper and cut strips 146915 handle bridge set.......................... $13.99 as thin as 1/8".The Handle Bridge Set eliminates 150753 deflector/connector...................... $11.99 need for handle adjustments while providing better

D

Magswitch Magnetic Featherboards

A C

B

MILESCRAFT Power Tool Safety Accessories

KREG True-FLEX™ Featherboard

The True-FLEX™ Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in imperfect cuts and less than safe operation. Each finger of the True-FLEX featherboard is designed to provide a consistent and optimum pressure. The featherboard is made from an extremely durable plastic composite body and includes an exclusive wedge-lock system. Whether you’re using a miter-slot or a T-slot, working on a table saw or a router table, the wedge-lock system adjusts accordingly and lets you work with confidence. Available as a single featherboard or a special value twin-pack. 148436 single featherboard...................... $19.99 839194 twin-pack featherboards..............$36.99

These accessories from Milescraft make operating your table saw, band saw, jointer, or table mounted router a less dangerous and more efficient. The BladeChanger™ is open sided and holds standard 10” diameter blades, 8" dados and 71/4" circular saw blades while you install or remove the arbor nut. The PushStick™ is a simple device that is enhanced by a cradle with integral magnets and on-board depth gauge. 148418 (A) BladeChanger™....................... $15.99 148419 (B) PushStick™..............................$18.50 Each FeatherBoard™ includes hardware for use in 1/ " T-track, 3/ " miter slot or 5/ " miter slot. The D/T 4 4 8 FeatherBoard™ includes two feather components and a spacer with hardware to use the featherboards in tandem, plus two 3/4" expansion bars, two 5/8" expansion bars and four T-slot bolts for single use. Each 2+ 148420 (C) FeatherBoard™...... $20.99..... $18.89 148421 (D) D/T FeatherBoard™.$33.99 . . $30.59

Unlike conventional featherboards, which are tied into the miter slot, Magswitch featherboards can be placed anywhere on a steel table A or fence surface. The easy on/off knob makes them convenient to use. Pro models have the stron- B C ger hold with two 30mm rare earth magnets. The Pro Table Magnetic Featherboard stays in position while the fingers press firmly against the material. The Pro Table model can be fit with the optional vertical attachment (sold separately) which accom- D modates stock up to 21/2" thick. Pro Fence Magnetic Featherboard provides downward pressure on your jointer table as well as steel fences used on router tables, shaper tables and table saws. Universal Magnetic Featherboard E with two 20mm rare earth magnets is perfect for infeed/outfeed applications. The Universal model is suitable for use on table saws, jointers, shapers and band saws. Pro Model Vertical Attachment can be installed on the Pro Table model as a vertical hold-down or stacked for tandem use. Adjusts vertically and horizontally and includes one set of risers, 90° arms and hardware. Vertical Attachment Risers include two sets of risers and necessary hardware for stacking featherboards. 147527 (A) Pro Table Mag. featherboard .$59.99 147979 (B) Pro Fence Mag. featherboard.$59.99 148442 (C) Universal Mag. featherboard .$59.99 149497 (D) Pro Model vertical att.............. $16.99 149498 (E) vertical attachment risers......... $8.99

Taper Jig

Miter Slot Featherboard

Two locking screws, not just one, hold this quick positioning featherboard securely in a standard 3/ " x 3/ " miter slot. The featherboard keeps stock 8 4 tight against the fence with flexible “feathers”, helps prevent chatter while cutting and greatly reduces dangerous kickback. This unit is made of sturdy plastic, is 3/4" T x 43/4" W x 61/4" L and has 41/2" of travel. 144518 .......................................................$10.50

Accurately cuts tapers up to 3" per foot or 15°. Includes a graduated scale measuring degrees and inches per foot of taper. Aluminum guide bars with 25/8" push handle. 03R22 .......................................................$20.50

Deluxe Wooden Featherboard

Prevents chatter and dangerous kick-back. Locks into standard miter slots with a twist of the knob. 41/2" adjustment slot, 9/16" T x 13/4" W x 10" L. 125417 ...................................................... $11.99 128401 repl. wooden fingers........................$7.99

Helping You Make Wood Work ®

17


Power Tool Accessories A

D

E

B H

G

F KREG Precision Measuring System (A) Solid Production Stop with dual cursors for reading from either side of the blade. It drops onto the top of the fence for easy removal, making this perfect for repetitive, high-production tasks. (B) Flip Stop has a curved front design that lifts out of the way to bypass the stop for squaring an end or cutting to length without moving the stop. (C) Perfect Miter Attachment will attach to either stop and references a 45° mitered board on two surfaces. (D, E) Top and Heavy-Duty Traks. The Top Trak (D) is a rugged anodized aluminum extrusion that can be used to create a precision measuring system for your mitersaw, drill press, table saw and more. It features a self-aligning L-shaped mounting foot for easy attachment to a shop-made 3/4" thick fence. The Heavy-Duty Trak (E) is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy-use applications. It has four T-slots which accept 1/4" hex bolts. (F) Jig and Fixture Bar is 30" long and has six plugs that adjust to take up any play in your miter gauge slot. Mounting holes every 4".

WIXEY Digital Angle Gauge

Just set the Wixey Digital Angle Gauge on your table saw top close to the blade, push the zero button, then attach it to your blade with the built-in magnets. Simply adjust your blade until the desired angle appears on the easy-to-read digital display. Display is in 0.1° increments. When close doesn’t count, count on the Wixey Digital Angle Gauge to give you accurate angle settings every time. 147281 .......................................................$39.99

(G) Mini T-Trak in three lengths to produce countless types of woodshop jigs and fixtures. This track is 3/8" tall x 3/4" wides and accepts any 1/4" hex bolt. 4' nonstick measuring tape can be added to inner track. (H) Trak Clamp hold-down clamp. Miter Combo Track (not shown) Combination 3/4" x 3/8" miter track & 1/4" T-track works with your miter gauge, featherboards, and other acC cessories to help add tremendous flexibility to your custom jig or fixture. Precision Micro Adjuster (not shown) Adds fine tuning to your swing stop when used with Top Trak or HD Trak. 146053.................................$14.99 145823 (A) production stop........................ $19.99 145822 (B) swing stop................................$29.99 145824 (C) perfect miter attachment........$21.99 145826 (D) top trak, 2'................................$23.99 145827 top trak, 4'.....................................$34.99 145828 (E) heavy duty trak, 2'...................$39.99 145829 heavy duty trak, 4'.........................$59.99 145830 (F) jig and fixture bar.....................$23.99 149081 (G) t-trak, 24"................................ $11.99 149082 (G) t-trak, 36"................................. $14.99 149083 (G) t-trak, 48".................................$18.99 145831 (H) trak clamp.................................. $4.99 145832 R-L self-adhesive tape, 12'............. $9.50 147942 R-L self-adhesive tape, 3.5 meter.. $9.50 145833 L-R self-adhesive tape, 12'............. $9.50 147943 L-R self-adhesive tape, 3.5 meter.. $9.50 145834 non-stick measure tape, 4'............. $4.99 149095 miter combo trak, 32"...................$29.99 149096 miter combo trak, 48"...................$39.99 Kreg Precision Measuring Systems Kit contains four 2’ pieces of Top Trak, two 12’ self adhesive tapes (L-R and R-L), one Flipstop and one Production Stop. 146487 ...................... Save Over $24!  $139.99

BEALL Tilt Box Digital Angle Gauge

The Tilt Box is a digital inclinometer that will read relative angles to an accuracy of +/- 0.1°. Turn it on, place it on your saw table and press the “Zero” button once to establish relative zero. Attach the Tilt Box to your blade using the rare earth magnets on its sides and it will register the relative angle between the blade and the table via a large, easy to read display. As a bonus, if you press the “Zero” button again, the Tilt Box will also measure absolute zero. This means that you can also utilize it as a portable pocket level. The Tilt Box is powered by a 9 volt battery. Includes battery and detailed instructions. 840837 .......................................................$40.99

WIXEY Digital Planer Height Gauge

Dial Indicator With Magnetic Base

With a flip of a switch its magnetic base locks itself in place. The “spring” extension arm of the base can then be adjusted to position the indicator tip precisely for measuring within .001". Choose between 0 - 1/2" or 0 - 1" dial indicators. Indicators and base are also available individually. 128399 0 - 1/2" indicator w/ mag. base.....$39.99 128400 0 - 1" indicator w/ mag. base.......$39.99 128396 0 - 1/2" dial indicator only..............$20.50 128397 0 - 1" dial indicator only............... $21.99 128398 magnetic base only...................... $21.99

18

Now you canstop constantly using calipers to check stock thickness! This unique gauge reads out both decimal and fractional measurements. Mount the Digital Planer Height Gauge and simply lower your planer until the gauge reads .562" - 9/16". It can’t get any easier! Fits most portable “lunch box” style planers with easy to follow installation instructions. 146096 ....................$65.99

Credit Card Orders: 800 225-1153

WIXEY Digital Height Gauge With Fractions

Using a rule, or fumbling with set up blocks is no longer necessary for accurate set-up of router bit or table saw blade height. The 11/2" x 4" base features a magnetic strip to hold the gauge in position. A large digital readout displays cutter height for exact depth settings. The shape of the anvil allows you to use the gauge to set router fence position up to 41/2". Displays both fractions and the decimal equivalent at the same time so you know your fraction is exactly on, not rounded up or down like other fraction read outs. Accurate to +/- .001", 1/500", or .025mm. 148380 .......................................................$59.99

ONEWAY Multi Gauge

The solid 11/4" thick cast iron frame is precision machined at 90° on three sides so you can check squareness of, or accurately position, joiner fences, saw blades or tilting tables of scroll saws and drill presses. The dial indicator has 11/32" of travel for a full 1" measurement in .001” increments. Dial indicator includes a round tip for checking run out and flat tip for saw blade, dado head, or router bit height adjustments. Additional applications include depth of cut measurements, planer/drum sander feed roller checks, and drill bit diameter measurements. This multi purpose tool revolutionizes dial indicator usage in the work shop. 126979 ......................................................$94.99

PINNACLE�® Saw Gauge

Getting accurate, repeatable results with a miter gauge can be difficult when the blade alignment is off. The Pinnacle® Saw Gauge is designed to satisfy this need. It’s the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8" wide like many older saws, 3/4" wide like most current models this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. Another exclusive feature is its ability to be set at one distance to align the blade then in an instant be reset to a different distance for checking the fence and back to the exact original location for comparison measurements. No knobs, no tools, no recalibration. Comes in a fitted MDF case for safe storage. Made in the USA except for the dial indicator which is imported. 149019 .......................................................$80.50

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Tool Accessories INCRA Miter Gauges

All feature GlideLOCK Miter Bars that adjust to precisely fit standard 3/8" x 3/4" miter gauge slots.

A (A) INCRA Miter Gauge V27. The V27 is engineered to provide a high performance, yet low cost upgrade to your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better Miter Gauge. Like all Incra Miter Gauges, the V27 delivers extreme miter cutting accuracy through the advanced combination of Incra’s exclusive AngleLOCKTM indexing system and its patented Adjustable GlideLOCKTM Miter Bar. 27 Precision V-Stops are laser-cut in solid steel to lock-in angles at exact 5° steps over a full 120° range, with special stops at plus & minus 22.5°. The V27’s vertical work support surface doubles as a Universal Mounting Bracket that makes it easy to add just about any fence if you ever need one. 144644 .......................................................$64.99

INCRA MITER V120™ Miter Gauge

The Miter V120 is equally at home on the table saw, band saw, router table, even the disk or belt sander. Constructed of machined and laser-cut steel components the miter gauge features 120 AngleLOCK™ indexing stops including 1-degree stop spacing with special stops at ±221/2°. 149499 .......................................................$84.99

INCRA MITER 1000HD™ Miter Gauge

The HD stands for High Definition, because the protractor plate’s exclusive AngleLOCK Indexing System has 180 angle stops in 1° increments with special stops located at 221/2°, telescoping IncraLOCK cut-off fence & Flip Shop Stop, steel vernier scale that reads to 1/10°, and you will improve the quality of any project. The Miter 1000HD will allow you to precisely set and quickly duplicate any segmented turning angle you might need to cut, whether it’s 18° for 10 sides, 25.7° for 7 sides, or anything else imaginable. 149714 .................................................... $189.99

B (B) Miter Gauge 1000SE. Special Edition adds a stainless steel Vernier cursor for an incredible 1/10th degree resolution between fixed C steps. The Special Edition also includes a miter fence that telescopes from 18" to a full 30" in length with the new INCRA Flip Shop Stop™ for patented Automatic Positioning Control™. The saw tooth rack system instantly controls the length of your cut with INCRA’s legendary machine shop accuracy as the dual “Flip” arms provide flexibility. The Flip Shop Stop™ is equipped with three sliding stop rods that operate independently or in tandem for one, two, or three simultaneous stop positioner setups. 143842 .................................................... $159.99

INCRA Miter Express

If you own a miter gauge you can turn it into a miter sled in just a few seconds by simply docking it in place on top of this unique sled. This sled is a sliding, miter-cutting platform that fully supports and controls your workpiece throughout the cut for improved accuracy. The Miter Express is designed to let you instantly drop and lock your miter gauge into the sliding platform. Once docked, it stays put until you undock it to switch back to your regular miter gauge. The sled features a built in miter bar that is adjustable for zero side play tracking. Other features include two embedded T-tracks to secure the included hold down clamp to anchor your workpiece, a locking drop panel that supports the offcut, and also provides zero clearance tear out control. 146488 .................................................... $159.99

D

A E

C WoodRiver® Guide Rail System

B

This system will allow you to place a tool guide for ripping, cross-cutting or routing at an acute angle on any size panel. The base component 56" Guide Rail features the same heavy-duty aluminum extrusion used in the WoodRiver Clamp Guides with integral 1/ " T-tracks and 21/ " x 1/ " profile. The Guide Rail 4 8 2 Connector locks together multiple guide rails to form a continuous guide for your circular saw or router across any length material. Pairs of clamps are sold separately to secure the guide rail at each end. These clamps swivel about the “T” shaped anchor and can be placed at any position along the underside of the guide rail extrusion. The unique Angle Jig acts like a miter gauge but instead of feeding the stock across the blade or bit, the jig connects to the guide rail to reference from the edge at any angle between ±60° with positive stops at 90°, ±30°, ±45° and ±60°. The 4′ x 8′ sheet guide rail kit contains (2) 56" guide rails, (1) guide rail connector and (1) pair of clamps to create the perfect guide rail system for ripping and cross-cutting 4' x 8'′ sheet goods. 150002 (A) 56" guide rail component...... $21.99 150003 (B) guide rail connector................$16.99 150004 (C) pair of guide rail clamps.........$26.99 150005 (D) angle jig for guide rail system.$35.99 150006 (E) 4 x 8 sheet guide rail kit..................... .................................... SAVE $10 $77.95 149196 Univ. base for routers & saws.....$29.99 844954 Freud 71/4" x 60T blade.................$49.99

KREG Miter Gauge System

Special Incra Combo Package Buy an Incra Miter Gauge 1000SE and Incra Miter Express and Save! 147374 Best Value Save $24.99!...$294.99

Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10 of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. Lastly your work piece is supported by a heavy duty 24" aluminum fence with an adjustable Flip-Stop. Includes a self-adhesive measuring tape. 145765 .................................................... $139.99 145822 extra swing stop............................$29.99 146053 precision micro adjuster..............$14.99

Helping You Make Wood Work ®

19


Power Tool Accessories MAGSWITCH MagJig Universal Base System

Magswitch technology is revolutionizing woodworking, giving you unmatched ability to hold your work on any steel or cast-iron table. The innovative MagJig Universal Base System is a modular design that combines new and existing components to create unique jigs for holding workpieces for safer, more precise operations. Future Magswitch products will be designed around this versatile platform. The MagJig Dual Roller Fence mounts to the MagJig Universal Base (sold separately) to create the ultimate “third-hand” when you are doing the most difficult and dangerous work. It helps supports a tall panel, hold down a long piece of wood or steady your resaw projects. Includes two sets of precision sealed roller bearings for smooth, nonmarring flow of material. MagJig Resaw Fence mounts to the MagJig Universal Base (sold separately) to form the smoothest resaw guide you will ever use. Angled faces allow for blade drift and make a perfect infeed or outfeed work support. The MagJig Universal Base is the keystone of the system and uses two MagJigs (sold separately) to hold the base in place on steel or cast-iron work surfaces. Includes adapters for the use of either 20mm or 30mm MagJigs. The Universal Base is expandable for use with future Magswitch products.

Pro Model Vertical Attachment is really three tools in one! It can be installed on the MagJig Universal Base and used as a vertical hold-down or conventional featherboard. It can also be installed on the Pro Model Featherboard as a vertical hold-down or stacked for tandem use. Includes two sets of risers, 90° arms and hardware. Vertical Attachment Risers include two sets of risers and necessary hardware for stacking featherboards. 149494 MagJig dual roller fence, only.....$24.99 149495 MagJig resaw fence, only............$22.99 149496 MagJig Universal Base, only........$18.99 149497 Pro Model vertical attach............ $16.99 149498 vertical attachment risers............. $8.99 147832 MagJig 95 . ............................ $19.99 147833 MagJig 150 . ............................$29.99

B

20

MAGSWITCH Mag-Squares

Imagine a strong clamp that “turns on” in an instant, won't damage the wood surface and mounts anywhere on your steel table surfaces….well, it's a reality with the Magswitch Mag-Square. Simply twist knob on or A off to apply or release super strong magnetic grip of 155 lbs. The pre-tapped mount holes on all 4 sides allow for mounting tools or jig fixtures using #10 - 32 on the 30mm model. An added bonus is the Mag-Square’s 90° corners which can be used for squaring operations. Mag-Squares offer flexibility in quick connect, disconnect, strong hold, squaring, precise positioning and mounting versatility. 147936 (A) 30mm........................................... $42.50 147937 (B) 50mm......................................... $109.99

Credit Card Orders: 800 225-1153

Turn tools on and off while performing tasks that require both hands. Just plug your tool into the footswitch and use its generous 7' cord to locate the switch in a convenient position. Great for scroll saws, power carving tools and other 115 Volt tools up to 15 amps. Features large 31/2" x 61/4" pedal for easy use. 145968 .......................................................$23.99

Momentary On/Off Deadman’s Switch

Perfect for any scrollsaw! This momentary switch provides quick, controllable starts and stops. Keeping both hands on the work allows you to be in complete control and work more safely while sawing. Just press the switch with your foot for “on” and lift your foot for “off”. 147876 .......................................................$20.99

KREG Multi-Purpose Router Table Switch Switch

The Kreg Multi-Purpose Router Table Switch adds safety and convenience to your router table. Mounts easily to both Kreg stands. Two female outlets for router and dust collection use. Large On-Off lockable paddle switch. 125volt, 15 amp, 8' long 14-gauge power cord. 149970 ..................................$34.99

Accessory Power Switch

MAGSWITCH Mag-Jigs

With Magswitch you have the flexibility of mounting a jig anywhere on a steel work surface. Each Mag-Jig is constructed to fit perfectly in a 3/4" board so that the bottom of the magnet is flush to the table surface. Simply determine a mounting hole location in your jig fixture that ensures complete contact between the Mag-Jig and the steel table surface, drill a 30mm or 11/4" hole for each 20mm Mag-Jig using a forstner bit (40mm or 15/8" hole for 30mm Mag-Jig) and drop the MagJig in the hole. Using your jig fixture couldn’t be any simpler: place the Mag-Jig against the work surface and turn the knob 185° in a clockwise direction to engage the Magswitch; when you’re finished, turn the knob in a counter clockwise direction to disengage. Two or more Mag-Jigs per fixture are recommended. 147832 Mag-Jig, 20mm.............................. $27.99 147833 Mag-Jig, 30mm..............................$35.99 125937 11/4" Forstner bit..............................$7.99 125940 15/8" Forstner bit............................. $9.99 147997 30mm Forstner bit.......................... $6.99 147998 40mm Forstner bit.......................... $9.99

Foot Switch - On/Off

This is an economical 15-amp switch, designed for use with scroll saws, sanders, lathes, router tables, or any bench-top tool application. The switch includes a 51/2' grounded cord with a 3-pin end and a 3-pin receptacle above the switch. A large paddle switch with removable child protective lock is easy to locate and turn the tool off. The housing is constructed from high impact plastic and the switch’s rear plate is made of heavy gauge steel with mounting tabs at the top and bottom. 145199 .......................................................$25.99

i-Socket Vacuum Automator

Have your shop vac start up and shut down automatically every time you turn your sander on or off with the i-Socket Vacuum Automator. Simply plug your router, sander or other handheld power tool into one socket and your shop vac into the other. Starting your power tool will automatically turn on your shop vac, and it will continue to run for approximately 7 seconds after you stop to clear out final dust and chips from the hose. A simple, economical solution that increases efficiency. 147369 ...................................................... $34.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


WOODSMITH Aluminum Box Joint Jig

attaches to your miter gauge to make precision box or "finger" joints. Sure, you can make homemade box joint jigs for your table saw or router table, but after you use them for just a short time the inaccuracies of the jig really show through with inaccuracies in the joint itself, and with fixed jigs there is no adjustability. This jig gives you the accuracy and adjustability to make perfect fitting box joints every time you use it. A micro adjustment feature allows you to move in increments of less than 1/64" for perfect fitting joints. “Chip out” is controlled by a replaceable plastic backing strip. Your stock rests on a bed in front of the jig to ensure safe and true cutting of the individual fingers. Finger width is adjustable from 1/4" to 13/16" in thickness. Constructed of a solid heavily ribbed aluminum extrusion, this jig provides unbelievable stability for repetitive cutting on both the table saw and on the router table. Jig measures 17" x 41/2". Includes detailed instructions and FREE DVD. 111202 .....................................................$104.99

Anti-Kickback Safety Rollers

Each set of Anti-Kickback Safety Rollers comes complete and ready to install on your fence or fixture. Yellow rollers rotate in a clock-wise direction and will not rotate counter-clockwise preventing kickback on table saw and router tables. Green rollers rotate in either direction so they are great for shapers where they act as a hold-down, not an anti-kickback device. Rather than permanently mounting them to your machinery, the 24" track allows you to move the rollers from one machine to another. 146836 yellow - clockwise..........................$45.99 146837 green - bi-directional.....................$45.99 146838 24" track........................................$21.99

LEECRAFT Table Saw Throat Inserts

Power Tool Accessories Use With Dados Too!

Simply raise your saw blade through the insert to create a “kerf” which precisely matches the blade on your saw. These 1/ " thick inserts are pre2 cision machined from a nearly frictionless melamine faced, high density phenolic laminate and offer durability and flatness not found in cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen! Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Craftsman insert measures 14" x 33/4" and fits most new, 10" belt drive models. (Check the opening of your Sears saw before ordering). The Powermatic 2000 Blade Insert has a slot for the riving knife. Complete with instructions. Insert surface colors may vary. Each 2+ Each 142759 Delta Left & right tilt.... $24.99....$22.49 152582 Delta Unisaw dado....... $39.99... $35.99 152649 DeltaUnisaw blade....... $36.99....$33.29 142760 Jet right tilt & Powermatic 64................... ...................................... $24.99....$22.49 142271 Jet left tilt...................... $24.99....$22.49 142021 Powermatic 66............. $24.99....$22.49 142022 DeWalt DW744 & 746................................ .......................................$24.99....$22.49 124214 Craftsman..................... $24.99....$22.49 832209 Craftsman vintage........ $26.99....$24.29 152650 Craftsman older........... $25.99....$23.39 147751 PM 2000 blade.............$34.99....$31.49 147752 PM 2000 dado...............$34.99....$31.49 832211 General 350 and 650...$24.99....$22.49 832212 General Int'l 50-220, Jet Workshop Saw 708100, JPS-10 Pro-Shop Saw 708482, 708483, 708480K.......................................$24.99....$22.49 832213 Gen. Int'l contractor......$24.99....$22.49 150665 Hitachi zero clearance.$24.99....$22.49 149010 Jet Deluxe Exacta......... $29.99....$26.99 149011 Jet Dlxe. Exacta Dado . $29.99....$26.99 832215 Ridgid TS3650.............. $24.99....$22.49 152583 Ridgid TS2400-1.......... $23.99... $21.59 152584 Ridgid R4510................ $23.99... $21.59 149416 Steel City 35900.......... $29.99....$26.99 149417 Steel City 35900 Dado.$29.99....$26.99 123033 sheet stock................... $24.99....$22.49

10" Table Saw Sanding Disk

Turn your table saw into a precision sanding station! By using your miter gauge you can quickly sand and square ends. Tilt your arbor and sand angled edges exactly. 10" machined disk has a 5/8" arbor hole. The sanding disks are cloth backed, resin bond, aluminum oxide with pressure sensitive adhesive and 3" center hole. 129272 10" sanding disk............................$18.99 146751 40 grit disk (1).................................$4.99 146752 60 grit disk (1)................................. $4.99 146753 80 grit disk (1)................................. $4.99 146754 120 grit disk (1)............................... $4.99

Grip-Tite Sub-Fence Clamp

No one wants to ruin the face of their expensive table saw fence with a dado blade. But the trouble with sacrificial fences is the clamps get in the way when making the cut. The “hole clamp” from Mesa Vista Design will allow you to easily clamp a subfence of any material to your power tool guide fence without interference. Great for rabbeting with dado blades, adding a high sub-fence for vertical support or attaching a steel plate for Grip-Tite magnetic hold downs. There is no drilling into the fence face, only two vertical 7/16" holes in your scrap material, slide the post of the clamp into the hole and tighten on your fence! Two clamps included. 148872 .......................................................$24.99

Power Twist Link Belt

Reduce vibration in any of your belt driven machines with the Power Twist Link Belt! Common V-belts develop a “memory” and retain their non-operating shape causing annoying and unnecessary machine vibration. However, these specially engineered link belts do not develop a “memory”, but retain their flexibility for smooth operation. Link Belt is 1/ " wide, easily adjustable and available either by 2 the foot or in a prepackaged 4' length. Includes instructions for use. 25N67 link belt..............................per foot $8.99 145530 4' length.........................................$32.99

Tenoning Jig

Cut perfect straight, angled, or mitered tenons on your table saw safely and easily! Oversized feed handles provide positive, safe operating control while the large crank style handle quickly secures stock up to 31/4". A 0° to 45°adjustable backstop supports stock for angular cuts. Its fine adjustment feature guarantees accurate, repeatable cuts. Features built-in provisions for adjustment and alignment to maintain cutting accuracy. Machined cast iron body parts. Fits any table saw with a 3/4" x 3/8" miter groove. 150784 .......................................................$89.99

Micro Jig MJ Splitter™

This is a low profile splitter that also serves as a mini feather board for the keeper piece behind the saw blade. Designed to be installed on a zero clearance insert (not included), the MJ Splitter features fool proof installation and a revolutionary concept that provides for alignment surfaces of different thicknesses. The standard MJ Splitter is made out of unbreakable polycarbonate to create the feather board effect when desired. The MJ Splitter SteelPRO is designed to withstand the severe table saw use of a professional woodworking shop. Whether you’re working with heavy panels or dense solid wood, the SteelPRO will give you the strength to cut them with confidence and, most important, safely. Includes two splitters to achieve four offsets to the blade, installation jig, drill bit and detailed instructions. 145612 1/8" kerf standard splitter kit........ $15.99 146178 thin kerf standard splitter kit.......$22.99 845404 1/8" kerf SteelPRO splitter kit........$34.99 845405 thin kerf SteelPRO splitter kit.......$34.99

Helping You Make Wood Work ®

21


Power Tool Accessories A

A

D

B

F C

E

INCRA T-Track And T-Track Plus

Add accuracy and precision to your jigs and fixtures with T-Track and T-Track Plus from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum construction is designed to house a 1/4"-20 bolt head, but that’s where the similarity ends. First, these tracks feature a “well” in the extrusion allowing the track to be mounted using the included #8 pan head screws versus #6 flat head screws used by other tracks. The extra depth of the “well” allows the use of 1/4"-20 nuts that are not accommodated by other tracks. On the T-Track Plus there is the addition of a highly accurate Lexan scale that can be moved to a “zero” reference. The T-Track is sized for a 3/4" wide opening, the T-Track Plus fits a 11/4" wide opening. 142803 (A) 18" t-track.................................. $8.99 142804 (A) 24" t-track................................ $10.99 142805 (A) 36" t-track................................ $13.99 142806 (A) 48" t-track................................$17.99 142580 (B) 18" t-track plus....................... $10.99 142581 (B) 24" t-track plus....................... $12.99 142582 (B) 36" t-track plus....................... $15.99 143218 (B) 48" t-track plus.......................$20.99

B T-Track Accessories

These T-Track accessories will complement any 1/4" T-Track that accepts standard 1/4" bolt heads. 12-Piece Plastic Knob Kit includes 4 each: 3" allthread 1/4" bolts and matching large plastic knobs and steel washers. 147918 (A)..................................................... $6.99 16-Piece Knurled Thumb Nut Kit features knurled thumb nuts and includes 4 each: 3" all-thread 1/4" bolts and matching steel knurled thumb nuts, steel washers, and nylon spacers. 147919 ......................................................... $6.99 1/ " Track Stop Kit includes a pair of anodized 2 aluminum “L”-shaped stops that extend 1/2" below the anchoring point and the necessary hardware to interface with any 1/4" T-Track. 147920 (B)..................................................... $6.99

Oval Nut 10 Pack include either #10-32 or 1/4 -20 oval nuts that are 7/16" wide (like a 1/4" bolt head), but unlike a conventional nut the thinner oval nut will slide easily in low-profile 1/4" T-Track. 147921 (C) #10-32, 10pcs............................ $3.99 147922 (C) 1/4-20, 10 pcs............................. $3.99 Deluxe Hold-Down Clamp. Better than normal hold-down clamps, this version has rubber tipped ends to increase grip on both surfaces and reduce denting of your work piece. A pivot cross-dowel ensures the clamp bolt is always perpendicular to the work surface. Includes a 3" long 1/4" hex head bolt, washer and knob. 142603 (D)..................................................... $8.99 Deluxe Flip Stop. This versatile stop can be set both to the left and the right. Each Flip Stop is machined to a tolerance of .001 of 1" so that, ganged together, you can quickly and accurately index your cuts or holes at perfect, 1" intervals. Great for use on drill press tables, hollow chisel mortisers or as a light duty chop saw fence. Sold in pairs. 148379 (E)...................................................$24.99 TrackLOCK is designed to interlock with INCRA T-Track Plus by overlapping a separate 1/4" T-Track or another piece of T-Track Plus. With a quarter turn of the cam lever, the upper T-Track Plus is released allowing free movement perpendicular to the bottom track. A brass knob secures the TrackLOCK from parallel movement in the lower track. Sold in pairs. 147924 (F)...................................................$24.99

Jig And Fixture Knobs And Handles Steel plated studs and brass

threaded inserts assure strong reliable holding power. Plastic molded knobs provide a comfortable grip.

J

G

D B

F

B

C E

I

H

A

Each

T-Style Knobs, phenolic, with insert. Each

4+

85J95 (A) 1/4"-20. $1.19.....$1.07 142226 (A) 5/16"-18.. $1.19.....$1.07 142227 (A) 3/8"-16... $1.19.....$1.07 T-Style Knob with 2" stud. 27R16 (B) 1/4"-20 . $1.99.....$1.79 Wing Knobs replace metal wing nuts and allow incredible torque. Phenolic 3" diam., with a 3/8"-16 insert. 85J94 (C)............... $1.99.....$1.79 Ball Knob, great for low profile jigs. 13/4" diameter with a 3/8"-16 insert.  27R17 (D)................$2.49.... $2.24 Tapered Handle is easy to grip. 33/4" high, 1" diam. with 3/8"-16 x 3/4" stud. 27R18 (E)................$2.49.... $2.24 Miniature Knob. Nylon 3/4" dia. x 9/16" knob with 1/2" long 10-24 steel stud. 27R11 (F) pair........ $1.50.... $1.35 Four Arm Knob with brass insert is easy to grasp for sure tightening in awkward positions. Phenolic 2" dia. x 1" height. Each 4+ 27R14 (G) 1/4"-20... $2.50.... $2.25 142228 (G) 5/16"-18 .$2.99.... $2.69 142229 (G) 3/8"-16. $2.99.... $2.69

22

A

D 4+

Four Arm Knob with 11/2" stud. 27R15 (G) 1/4"-20... $2.50.... $2.25 142906 (G) 5/16"-18. $2.50.... $2.25 142907 (G) 3/8"-16... $2.50.... $2.25 Four Arm Knob with through hole. 142230 (G) 1 /4"-20 . $1.99.....$1.75 142231 (G) 5/16"-18 .$1.99 ....$1.75 142232 (G) 3/8"-16 .$1.99 ....$1.75 Five Star Knob with through hole. Versatile ABS polypropylene 21/4" dia. knob with “through” steel insert allows it to travel any distance on a threaded rod or bolt. 27R13 (H) 1/4"-20.. $1.39.... $1.25 142224 (H) 5/16"-18 .$1.39.... $1.25 142225 (H) 3/8"-16... $1.39.... $1.25 Ratchet Multi-Position Handle. Move the handle to any position so it doesn’t interfere with your work, or use it for those “tight” places where full turns are not possible. 21/2" nylon handle, height 17/16", with 1" long 5/ "-18 steel stud.  16 129131 (I)................ $3.99.... $3.59 129132 (I) stud........ $3.99.... $3.59 (J) Ergo Style Knobs. Ergonomically designed for comfort and strength. 146910 15/8" D, 1/4" x 20.......$1.50 146911 23/8" D, 5/16" x 18.....$1.50 146912 23/8" D, 3/8" x 16.......$1.50

Credit Card Orders: 800 225-1153

Specialty Jig And Fixture Hardware

A collection of every C accessory that you need to build the kind of jigs and fixtures that increase accuracy, efficiency, and safety in your woodworking shop. (A) T-Bolts. Standard “toilet bolt” design, the 1/4"-20 bolts will slide easily into the small T-Slot groove. The 5/16"-18 will slide into the medium T-Slot groove. Sold in packs of 10. 130435 1/4"-20 x 13/4"............ $7.50 130436 1/4"-20 x 21/4"............ $7.50 130437 1/4"-20 x 31/2"........... $9.99 130438 5/16"-18 x 21/4"........$11.99 130439 5/16"-18 x 31/2"........$11.99 (B) Sliding T-Nuts sold in packs of 10. 130440 1/4"-20...................... $1.99 130441 5/16"-18..................... $2.50 130442 3/8"-16....................... $2.50 (C) WHITESIDE Special T-Slot Router Bits are designed to make easy work of creating your own professional woodworking jigs and fixtures. The Small T-Slot measures 5/8" W and 3/16" H at the base with a 1/4" shank. It requires the cutting of a 1/4" straight groove, with a router bit or dado blade, prior

to routing the “T”. The Medium T-Slot measures 3/4" W and 3/16" H at the base with a 1/2" shank. It requires the cutting of a 3/8" straight groove prior to routing the “T”. Both are carbide tipped, made in the USA. 128256 small t-slot.............$23.99 128257 medium t-slot........ $26.99 Straight Bits, for cutting straight grooves. 1/4" dia. bit has a 3/4" cutting length and 1/4" shank. 3/8" dia. bit has a 1" cutting length and 1/2" shank. 24A04 1/4" dia.................... $14.99 24A33 3/8" dia....................$16.99 (D) Cam Action Hold Down let’s you build quick action clamping into your special jigs, fixtures or fences. Comes with a 31/2" x 5/16" x 18 tpi T-bolt, steel and nylon washers. The 11/2" long lever is large enough to easily grip yet small enough to not interfere with your jig. 145630 .................................. $5.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Tool Accessories D E

B

C A

INCRA Build-It System For Jigs & Fixtures

Quickly and easily create a wide variety of common and special purpose jigs & fixtures that you typically find hanging on the walls and rafters in just about any woodshop. The highly versatile INCRA Build-It modular jig & fixture platform system begins with MDF Base Panels that are pre-cut and pre-drilled to instantly accept all of the components of the system. Add a Miter Slider in seconds and it’s automatically square to your saw blade with no tedious measuring or drilling. Then mount a fence in moments using the counter-bored mounting holes. The innovative T-slot Panel Connectors are specially designed aluminum components that simultaneously interconnect the panels and provide a rock solid T-slot for adding and holding jig accessories, fences, stops, INCRA Hold Down Clamps and INCRA L-brackets. With the Build-It system, you just connect the parts with a screwdriver and the included fasteners. Starter Kit includes one each of the small & large MDF Base Panels, 18" Miter Slider, Hold Down Clamp, L-Bracket pair, 1/4"-20 Knob Kit, 18" T-track, 18" T-track Plus and two 18" T-slot Panel Connectors. Plus 5 free jig plans! 148117 (A) MDF base panel, 73/4" x 151/2".$14.99 148118 MDF base panel, 113/4" x 151/2" .$16.99 148119 (B) T-slot panel connector, 18"..... $16.99 148120 T-slot panel connector, 24"......... $21.99 148121 (C) L-bracket (set of 2).................... $9.99 148122 (D) hold down clamp.................... $11.99 148123 (E) 1/4"-20 knob kit (set of 4)........ $10.99 14V59 INCRA Miter Slider, 18"................. $16.99 129795 INCRA Miter Slider, 24"................$20.99 148541 Build-It system starter kit...........$119.99

INCRA Miter Channel

Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. Each channel is constructed of hard anodized aluminum for durability with Incra’s trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 11/8" wide, 1/ " deep groove in your 2 table or create a laminated fixture using 1/2" thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs and will work with any standard 3/8" x 3/4" miter bar. Add versatility to INCRA Miter Channel as well as most power tool miter gauge slots. The kit includes: (4) knobs, (4) steel washers, (8) nylon washers, (4) 2” bolts and (4) unique T-slot nuts. 145709 32" miter channel......................... $16.50 145710 48" miter channel.........................$21.99

Miter Slot Nut Kit

Add versatility to INCRA Miter Channel with this kit which includes: (4) knobs, (4) steel washers, (8) nylon washers, (4) 2" bolts and(4) unique T-slot nuts 151088 4-pk miter slot nut kit...................$19.99

UHMW Sheets

INCRA Miter Sliders

Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you’re ready! Miter Sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs. Sold individually. Each

4+

14V59 18" slider..................... $16.99...... $15.29 129795 24" slider....................$20.99......$18.89

Perfect For Precision Jigs And Fixtures! A tough, heavy, dense plastic with self-lubricating properties, this Ultra High Molecular Weight material is great at reducing material to fence friction on router table fences or auxiliary table saw fences. UHMW is easily machined so it can also be used for table saw runners, router templates or any project component where friction is a problem. Sheets are 4" x 48". 124225 1/8" thick......................................... $10.99 124226 1/4" thick......................................... $17.99 124227 1/2" thick.........................................$25.99 124228 3/4" thick.........................................$29.99

Premium Steel Miter And Jig Bars

Making jigs for your power tools is almost as challenging and enjoyable as the woodworking projects themselves. Many jigs, particularly those built for table saw applications need a miter bar. Simple, durable and easy to use steel miter bars are available in two lengths, 18" and 24" (actually 233/4"). Both of these bars have multiple drilled and tapped holes of #10-24 or 1/ -20 thread. You can easily bolt this bar to both 1/ " 4 2 and 3/4" material. Each miter bar is 0.748" to 0.750" 3 3 wide x 0.375" thick ( /4" x /8"). Mounting hardware included. Made in U.S.A. 148848 24" bar...........................................$24.99 148849 18" bar........................................... $19.99

Ultra High Molecular Weight Jig And Fixture Stock

Because of its low friction, highly durable surface and excellent machine ability, Ultra High Molecular Weight (UHMW) polyethylene is perfect for making jigs and fixtures, drawer guides, router bit setup gauges, etc. The 3-lb. bag contains a wide variety of both thick and thin pieces with no pieces longer than 12", the 41/2-lb. bag has the same variety but contains no pieces less than 16" long. Bags are randomly assembled with no guarantee of color. 143291 3 lb. assortment........................... $11.99 145529 41/2 lb. assortment....................... $21.99

Slick Strips Reduce Friction

Micro Jig ZeroPlay® Miter Guide Bar System Reach new levels of accuracy with the ZeroPlay® Guide Bar. The one-touch calibration miter bar system makes it easy to adjust to the exact width of your miter slot. Build precision jigs with a miter bar that has no side-to-side play. The ZeroPlay Guide Bar is 91/2" in length that has two stacked half-bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot, Shopsmith™ or even the tricky General brand miter slot. ZeroPlay Stops are designed to travel within your miter slot serving as an anchor for your jig or to limit the travel of your ZeroPlay Guide bar. 150754 single ZeroPlay® miter guide bar .$11.99 150755 ZeroPlay® miter guide stop............ $4.99

To the point where almost everything moves like it’s mounted on ball bearings! This special UHMW (Ultra High Molecular Weight) adhesive-backed flexible plastic film has a low coefficient of friction and a high abrasion resistance that surpasses even TeflonTM. The 3" width is ideal for use on power tool fences and provides a slick, mar-free surface for router bases and wear plates of portable circular saws. The 3/4" width is perfect for renewing the smooth run of worn wooden drawers. 10.5' rolls are easily cut to length. Each 3+  16L64 3/4" width...........................$7.25 ...... $6.50 16L65 3" width.......................... $19.99 .... $17.99

Helping You Make Wood Work ®

23


Power Tool Accessories

Here’s an upgrade that turns an ordinary bandsaw into an extraordinary bandsaw! These easy to install kits provide significant improvement in saw performance through more consistent blade tracking and reduction in blade friction. Bearings are fully sealed and lubricated and the easy to adjust all ball bearing guides eliminate the necessity of "side bearing blocks". Carter guides adjust for blades from 1/8" to 1" in width and are ruggedly built for long lasting durability. Each kit includes all mounting hardware and complete instructions. Fits round guide support shafts only. Hex shank model for old saws is available as a special order item. 812766 for Jet 14" bandsaw................... $169.99 812765 for Delta 14" bandsaw............... $169.99

A

B KREG Precision Bandsaw Fence

Introduce a new level of accuracy to your band saw with this precision fence. The rigid aluminum extrusion guarantees strength and stability, and is adjustable in two dimensions so you can set this fence parallel to the blade both vertically and horizontally. Cutting accuracy and repeatability is further enhanced by the precision lens curser that reads off of the included scale. Fits most 14" bandsaws, mounting hardware and instructions included. Optional Micro-Adjuster for ultra fine fence adjustments. 146050 (A) fence....................................... $107.99 146053 (B) micro-adjuster.......................... $14.99

CARTER AccuRight™ Universal Circle Cutting Jig

Cut circles up to 4+ feet diameter with your bandsaw. The jig attaches quickly and easily to the Carter MAGFENCE or saws without the MAGFENCE with the universal attachment bracket. No drilling or external mounts necessary. Circle thickness limited only by bandsaw resaw capacity. Jig includes easy to read diameter measurements for precise circle size. Use with any blade guide, block or bearing. 149941 .......................................................$64.99

CARTER Urethane Bandsaw Tires

Bandsaw Roller Guides

Converting your old 14" bandsaw blade guides to precision roller guides is now as easy as changing your stock guide blocks. Micro precision ball bearings increase blade life and improve the accuracy of your cuts. No cutting or removing saw parts, no conversion parts and no set-up headaches. Upgrade your saw to get the performance you always wanted. 129953   fits Delta 14"................................$76.99 129954   Jet and most imported 14".........$76.99

Cool BlocksTM Bandsaw Blade Guide Blocks Made from a specially formulated graphite impregnated phenolic laminate, Cool Blocks are self-lubricating, enabling them to withstand the heat generated by blades running at high speeds. Eliminate the blade damage that occurs when teeth contact the metal blocks. Pack of 4 blocks to fit upper and lower guides.

Saw Type

49H01 49H07 49H02 49H03 49H06 49H05 144530 144531 144532

Delta 14"............... 1/2"x1/2"............$14.99 Delta 8" & 10" . ..3/16" round..........$14.99 imported 14"......... 1/2"x1/2"............$14.99 Sears 12".............. 3/8"x3/8"............$14.99 old Sears............. 1/4" round..........$14.99 Shopsmith 11"...... 3/8"x3/8"............$14.99 9" 2-whl. 13/64"x13/16", 13/64"x1"......$14.99 Delta 12" ,16", Jet 12".5/16" x 3/4"..$14.99 imports 12mm (.472") round........$14.99

24

Approx. Block Size

CARTER Bandsaw Guides

Even under occasional use the tires on bandsaw wheels periodically need to be replaced. Unlike rubber tires, which are cumbersome to replace, these slip on without any special tools, messy adhesives, or excessive downtime. Simply heat in hot soapy water and stretch this tire on to the wheel and the bandsaw is ready to use. Urethane tires also offer better performance and enhanced durability. Each package contains one tire and is sized according to the wheel diameter of the saw. The tire may be trimmed for width. 819402 10" bandsaw, 7/8" wide.................$20.99 144968 12" bandsaw, 7/8" wide................. $27.99 144969 14" bandsaw, 7/8" wide................ $32.99 144970 16" bandsaw, 11/2" wide...............$40.99 144971 18" bandsaw, 11/2" wide............. $45.99

CARTER Clean Sweep Bandsaw Tire Brush

Cleans saw dust and debris from your 14" bandsaw’s tire to extend tire life and improve tracking. Mounts against lower wheel, easy to install and a simple but effective upgrade to any bandsaw. 146153 ...................... $6.99

Credit Card Orders: 800 225-1153

CARTER MAGFENCE™ Universal Magnetic Fence

The MAGFENCE attaches quickly and easily to most steel or cast-iron power tool tables regardless of size. Because there is no direct-to-table mounting required, this fence is truly universal. The fence has multiple T-slots on the sides and top for attaching a wide variety of accessories. Attach the MAGFENCE to the side of a table to convert to an aluminum table extension, giving you extra work area on small bandsaw and sander tables. Removes quickly to use with multiple equipment and is compatible with future MAGFENCE accessories. 149522 16" magnetic fence....................... $79.99 149523 191/2" magnetic fence...................$89.99 149555 Carter set up DVD......................... $14.95

Cobra Coil Bandsaw Tension Spring

The tensioning spring on a bandsaw will weaken over time, especially on saws that have had high tension “dialed-in” for resawing. The Carter Cobra Coil will restore the tension available for resawing and may even improve the performance of new machines. This spring will produce over 10,000 PSI of blade tension even on machines equipped with riser blocks. The Cobra Coil fits Delta, Jet and most imported 14" bandsaws. 144967 ..................................................... $22.99

CARTER AccuRight Bandsaw Blade Inserts

Carter AccuRight zero clearance band saw table inserts are molded of a Nylon material that saves the blade in case of accidental contact. A tighter blade opening results in less chipping and rough edges when cutting thin material. Delta style fits most Delta woodworking saws and many import clones. Jet style fits most Jet woodworking saws and many import clones. Sold in packs of three inserts. 148113 inserts for Delta (3)........................ $9.99 148112 inserts for Jet (3)............................ $9.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Tool Accessories A B

C WOODPECKERS® Drill Press Table Package

The Drill Press Table Package includes the drill press table, a pair of 1" flip stops (A) and two deluxe hold-down clamps (B) . The Woodpeckers Drill Press Table has a generous 16" x 23", 1" thick surface consisting of a MDF core covered with new MicroDot laminate. Micro-Dot has a unique texture; a grid of small dimples that collect sawdust allowing the surface to “grip” the workpiece under pressure. Each table includes a removable insert to minimize tear-out when drilling through material without the need of a “backer board”. Two, double-wide T-Tracks are embedded and bolted in place from

underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-Track (C) is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Fence uses the same double-wide track for more accessory mounting options including a simple “L” stop (included) and optional Flip Stops. The 36" long fence is engraved with a center scale (zero in the center) and adjustments require no tools. Mounting hardware is included. For 13" and larger drill presses. 149418 drill press table pkg.................... $129.95 148369 drill press table.............................$99.99 148379 (A) 1" flip stop (pair).......................$24.99 142603 (B) deluxe hold down clamp........... $8.99

Quick Set Drill Press Hold-Down

If you have ever been frustrated by the inadequate clamp opening and clumsiness of most drill press clamps, here is y o u r a n s w e r. The post quickly mounts to most drill press tables with slots or holes, a bolt passes through the table and is secured with a large ring nut. To adjust the height for up to 5" of capacity, simply depress the clutch (similar to a pipe clamp) and slide the clamp head to the desired setting. Hold-down pressure is provided by the cam- action clamp on the head which features a 11/2" D rubber foot to help prevent marring your workpiece. 145969 ....................................................... $15.99 147827 large clamp pad.............................. $2.99

Drill Press Roller Support

Have you ever needed three hands to work with long stock on your drill press, two to support the stock and one to lower the bit? Then this roller support is for you! Bolt it to any 21/4" to 4" drill press column and extend the outriggers, on one or both sides, up to 28" from the center of the table. The 93/4" work support rollers have 9" of vertical adjustment for accurate leveling. Features a center tray to hold extra bits or tools. 06V95 ...........................................................$59.99

PALS Contractor's Table Saw Alignment System

Magna-Set Jointer Jig

Lets you quickly and accurately set jointer knives in minutes or shift a nicked blade in seconds. Holds all steel knives in perfect alignment and at the precise height of the outfeed table during blade installation. Installs knives on jointers up to 8" wide. 03V32 polycarbonate body..................... $34.99 123037 steel body ....................................$52.99

This “precision alignment system” replaces the manufacturer-supplied rear trunion bolts in your table saw allowing you to micro adjust your blade’s alignment to the top’s miter slot. Put away your old hammer and 2 x 4 “adjustment” tools and use the supplied Allen wrench for controlled, discrete adjustments that will result in perfect blade alignment. Kit comes complete with installation instructions. 148721 3/8" stud kit: Craftsman (US made) and Ridgid saws................................... $19.99 148722 5/16 " stud kit: Delta, General, and Craftsman (imported) saws.......... $19.99

DELTA Mortising Attachment Kit

Fits most Delta and Sears models, and any other drill presses with 66 mm (25/8"), 50.8 mm (2"), 48 mm (17/8") or 38 mm (11/2") diameter quills. Fence bolts to drill press and provides 4" under the hold down rods. Kit includes attachment, fence, hold down rods and four chisels and bits (1/4", 5/16", 3/8", 1/2"). 813890 kit..................................................$99.99 WoodRiver® Mortise Chisels and Bits. Replacement bits for the Delta Mortising Attachment and other similar units. Each includes a chisel and bit, the set includes all four in a handy wooden case. 143996 1/4" set...........................................$13.50 143997 5/16" set........................................ $13.50 143998 3/8" set.......................................... $13.99 143999 1/2" set........................................... $17.99 144010 4-pc. boxed set............................ $41.99 CLICO Mortise Chisels and Bits. Manufactured in Sheffield England from hand forged steel, these are the finest mortise chisels and bits we’ve ever used. The extra-long, deep-reaching chisels are taper ground to prevent hanging in the mortise. Bits are ground, sharpened and polished by hand for extra clean cuts. Fits Delta and most Taiwan manufactured mortising attachments. 06V86 1/4" chisel & bit set.......................$99.99 06V87 5/16" chisel & bit set..................$101.99 06V88 3/8" chisel & bit set.................... $104.99 06V89 1/2" chisel & bit set.................... $104.99 Mortising Chisel Sharpener sharpens mortising chisels in seconds! Two models are available, choose the one that matches the manufacturer of your bits. 144385 for WoodRiver®/Delta/Taiwan.....$39.99 06V91 for Clico........................................$119.99

Magnetic Planer Knife Setting Jigs

These economical jigs allow you to install and adjust planer knives quickly and accurately, saving you both time and frustration. Magnets hold both the jig to the head and the knife to the micro blade adjusters. Set your knives to a tolerance of ± .002" in minutes! Each set includes two jigs, case and instructions. Large jig fits planers with head diameters of 3" to 5", small jig fits planers with head diameters of 17/8" to 3". 145256 large jig set....................................$51.99 145729 small jig set...................................$51.99

Helping You Make Wood Work ®

25


Power Tool Accessories Adjustable Roller Stand

Extremely sturdy and easy to open and close, this stand is great for helping you handle long and heavy boards. The 1" square steel tubing holds the galvanized dual bearing roller, while rubber feet prevent it from slipping. Height adjusts from 271/2" to 43". Weight capacity is 88 pounds. 147185 .......................... $26.99

Five Roller Stand HTC Port-A-Mate Miter Saw WorkCenter

New and improved model features two-wheel portability for easier maneuvering, folding brackets on the front legs for integrated material storage and new work support lock design for more positive positioning of work supports and rollers. The PortA-Mate Miter Saw WorkCenter takes the concept of multi-functionality to the next level. Benchtop tools such as miter saws, planers, band saws, scroll saws and more can be used interchangeably. The heavy-duty built aluminum stand is 33" tall and 67" wide, yet expands to support material up to 16-feet. Legs fold in for easy storage and transport. Folded dimensions: 113/4" x 10" x 663/4". Universal machinery mounts snap securely to the aluminum top, making tool changes fast and easy. Adjustable work supports have rollers with integral material stops. Includes: (1) pair of universal machinery mounts; (3) roller supports; and 4-outlet 15-amp power center. FREE bonus cast-aluminum quick-mount vise and work light. 148989 Port-A-Mate Workcenter............. $249.99 834467 accessory mount (Pair)................. $27.50

HTC Outfeed Roller

Extend your saw table a full 4 feet beyond the blade with an HTC Outfeed Roller. Few operations are more difficult than wrestling a giant sheet of plywood or particleboard through a table saw. This outfeed roller delivers immediate improvements in safety and accuracy, especially when you’re working by yourself. The support lifts and locks quickly into position with a single motion and requires no tools to engage or disengage. Model HOR-1038 is 37" wide, fits most 10" cabinet saws with adjustable mounting bracket and supports up to 200 lbs. with three columns of rollers. 148581 .....................................................$379.99

Heavy-Duty Extendable Roller Stand

The ultimate outfeed table solution for the small shop! Raise the stand to the height of the machine you are using up to 39", expand to the length you need up to 53", lock the casters and you’re ready to go. After use the stand compacts to 24"H x 26"W x 19"L for easy storage under a bench or saw wing. Features nine 15/8" dia. by 19" long rollers, and 4" double locking casters. Maximum load 300 lbs. 144917 ..................................................... $274.99

26

The Shop Fox FiveRoller Stand adjusts from 261/2" to 433/4", making it useful for most woodworking shop tools as an extra outfeed support, or a more general support that needs a mobile top surface. The rollers are 15 7/8" wide and the heavy steel construction is very rigid. This stand is an excellent shop helper when working on larger pieces of wood. 143636 ...................... $94.99

HTC Universal Mobile Bases

With the HTC family of Universal Mobile Bases size is no longer an issue! Each base features side rails and corner pieces with holes spaced every 1" to insure the perfect fit to your machine. All parts are included in this stable 4-wheel design that increases machine height by less than 1". Foot operated levers lock machines to the floor. The heavy-duty HTC3000 with integrated foot locks and floor locks assembles to a minimum square of 14" x 14", maximum square of 38" x 38", maximum rectangle of 22" x 54" and supports machines up to 700 lbs. Model HTC2000 assembles to a minimum square of 12" x 12", maximum square of 36" x 36", maximum rectangle of 20" x 52" and supports machines up to 500 lbs. Model PM1000 assembles to a minimum square of 12" x 12", maximum square of 34" x 34", maximum rectangle of 18" x 50" and supports machines up to 400 lbs. 146177 HTC 3000....................................$114.99 150781 HTC 2000.......................................$69.99 150782 PM1000.........................................$59.99

INCRA Steel Miter Slider SE

The INCRA Miter Slider SE combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA miter gauges. Miter Slider SE bars are drilled to match perfectly with the INCRA Build-It Panels and a second set of 1/4"-20 holes to accept knobs and fasteners commonly used with jigs and fixtures. Long-wearing nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, for smooth, low-friction travel. Steel bars include removable T-slot retaining clips for both ends of the bar for superior stability of larger jigs. The Miter Slider SE will fit square-sided 3/4" x 3/8" miter slots with or without a T-slot bottom. GlideLOCK adjustment accommodates slots measuring 0.740" to 0.765" in actual width. Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot; choose standard aluminum Miter Slider for these applications. 149882 18" Steel Miter Slider....................$24.99 149883 251/2" Steel Miter Slider...............$34.99

Credit Card Orders: 800 225-1153

WoodRiver® Universal Mobile Base Hardware Kit

This kit provides the components to assemble a universal mobile base for your machine or tool stand using your plywood or similar panel cut to size. Made of heavy-gauge steel, once assembled the mobile base can support up to 600 lbs. and accommodate a 12" x 12" to 36" x 36" machine. The four mobile base corners are adjustable for different plywood thicknesses from 1/2" to 11/2". Features two convenient, foot-operated pedals to raise the base onto casters or lower the base onto adjustable levelers. Two sturdy swivel casters and two fixed casters provide maximum mobility. Includes hardware for panels up to 3/4" thickness and instructions for assembly. 150783 .......................................................$59.99

WoodRiver® Adjustable Mobile Base

The WoodRiver ® Adjustable Mobile Base will make it easier to move your tools, enabling you to get the most out of your existing space. The stable 4-wheel design features all steel construction with a 400 lb. capacity. The frame adjusts in 1" increments to easily expand from 12" to 50". Minimum size is 12" x 12", maximum square is 34" x 34" and maximum rectangle is 18" x 50". Step on the foot-activated metal cam levers, roll your tool into position then lower the tool to rest firmly on the adjustable rubber leveling feet. 148515 .......................................................$59.99

HTC Deluxe Tool Table

The HTC Deluxe Tool Table is constructed of heavy gauge steel and features an expandable 14" x 25" x 1" MDF top with a handy ruler imprinted on the surface. This table also features an 18" x 27" MDF lower shelf, rubber feet for non-skid support and a tough, powder-coat finish. Working height of 31" and 500-lb. capacity. 151044 .................... $59.99

BOSCH Gravity Rise Miter Saw Stand

Setup and breakdown in seconds without removing the saw on the Bosch T4B Gravity Rise Miter Saw stand. Features adjustable material supports and repetitive stops, rapid release universal tool mounts, 8" pneumatic wheels and adjustable leveling feet. Constructed of powder coated 11/2" tubular steel and designed to fit most miter saws. The expansion rails provide material support up to 18 ft. 841931 .................................................... $339.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Tool Accessories

Retracting Casters For Contractor Style Saws

HTC Machine Covers

Put your open base saw on wheels with the touch of a toe! Unlike mobile bases, these casters do not change the height of your saw. When the casters are retracted your saw sits solidly on its own legs. The swiveling wheels fit most open base saws. Set of four; all mounting hardware is included. On some saws, drilling may be required for the mounting hardware. 141550 .......................................................$44.95

A

B C

KREG Trim Carpentry Tools

The Kreg Square-Cut™ is the fastest and easiest way for anyone to achieve perfect square cuts and consistent lengths. The innovative adjustable guide arm can be set the exact distance from the edge of the saw base to the inside edge of the saw blade regardless of your saw type. Kreg Crown-Pro™ gives trim carpenters and DIY enthusiasts alike a fast and easy way to add beautiful looking crown molding to any room in the house. Thanks to its unique design, the Crown-Pro dramatically simplifies the cutting process by eliminating the need for coping and offering adjustability for any spring angle between 30 and 60 degrees. Through a simple, durable design, the Multi-Mark™ takes the place of the T-square, torpedo level, depth gauge, trim tool, story stick, and much more. Whether setting the reveal on a door frame or ensuring accurate spacing between face-frame rails, this one tool does it all. 150870 (A) Square-Cut saw guide............. $16.99 150871 (B) Crown-Pro miter saw guide.....$29.99 150872 (C) Multi-Mark marking gauge...... $19.99

Laser Guide For Miter Saws

Convert your miter saw into a precision laser-guided power tool! Simple to install, just replace the saw’s outside blade washer with the self-aligning Laser Guide. The guide projects a clear line just to the left of the cut, and turns on and off automatically at 400 RPM. Includes laser guide, batteries, three different installation bolts to cover most applications, hex key for battery installation, and soft sided storage case. No more “sneaking up” on a mark, just cut on the line. Will not fit Bosch, Rigid, ProTech or Dewalt model 704 or 705 saws. 146808 .......................................................$39.99

Drill Press Safety Planer

Was developed to let your drill press cut a variety of panel edges, moldings, rabbets, tenons, rosettes, etc.Three high speed steel cutters mounted firmly in the circular head of the planer produce a satin smooth finish. Width of cut capacity in one pass is 23/4", depth is 1/4"- 3/8". Includes sharpening wheel. Operates at 3,000–6,000 RPM, fits any 1/2" chuck. 03Q41 .......................................................$55.50

81/2' Cutting Guide

Get accurate, professional results cutting plywood, trimming doors, scoring wallboard, cutting linoleum, carpeting, and wallpaper. This guide is made of two 51" aluminum extrusions that interlock to make a full 102" straight edge. Two “C” clamps are included which may be positioned anywhere along the guide for secure alignment. 144263 ...................................................... $32.99

Condensation and the rust it brings on are all too often the results of ordinary machine covers. These HTC covers are of a strong, durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant, but breathes so condensation doesn’t collect. The covers have the hems rolled around the entire perimeter, with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house, but are sized for woodworkers. The small 27" x 36" cover is great for benchtop tools; the medium 36" x 56" works fine on scrollsaws, short bed jointers, router tables and belt/disc sanders; the large 56" x 72" model is great for table saws, shapers, lathes, planers, long bed jointers; the jumbo 72" x 112" is for large table saws with extensions, and any other machinery too large to be covered with the other sizes. 143838 small............................................. $18.50 143839 medium..........................................$25.50 143840 large............................................... $37.99 143841 jumbo............................................ $55.99

Ball Bearing Work Rollers

Unlike rollers which operate only in a straight line, these 360° universal transfer bearings excel where shop materials are pushed and turned in all directions. Make up your own outfeed tables for saws (great for bandsaws), finishing tables, assembly lines and more! Rollers have 5/8" or 1" hardened steel balls rotating on 1/8" dia. internal bearings. Load rating 75 lbs. each. 07B09 07B08

Diameter

Each

6 + 

5/ "..................................... $2.99..... $2.70 8

1"...................................... $3.99..... $3.59

Protractor And Saw Guide

Improves cutting accuracy, eliminates unnecessary measuring and marking and saves time on repetitive cuts. Just set the desired angle and cut! Makes 90° cuts on stock up to 121/4" wide. Designed for use with portable electric circular saws and jigsaws. Calibrated for 70° - 0° - 70° angles. 171/4" long, 11" wide. 128193 ..................................................... $13.99

Magna-Set For Planers

Changing, adjusting and resetting planer knives can take an hour, but these magnetized units let you do it in minutes. Each unit uses 9 Alnico magnets to position itself on the knife cylinder and set the blades to a tolerance of ±.002". For use on planers with heads of 21/2" diameter or more. Set of 2, with instructions. 03V31 pair ............................................. $154.99

BORA Clamp-N-Cut Edge Guides

BORA Clamp-N-Cut edge guides are ideal for all types of woodworking, cabinet making and DIY applications. The exclusive swivel head design will allow the Clamp-N-Cut edge guide to firmly clamp angles up to 221/2° for flexibility in many clamping and cutting applications. These clamping edge guides feature an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping. The large, over-sized clamping handle allows for increased clamping pressure, while the soft-grip rubberized clamping pad insures your work material is held firmly in place, without fear of marring. Each unit includes an integrated hanging loop for convenient storage. Size denotes maximum clamping capacity. 148685 Clamp-N-Cut edge guide, 24".......$34.99 148686 Clamp-N-Cut edge guide, 36".......$39.99 148687 Clamp-N-Cut edge guide, 50".......$44.99 150660 3-piece set.....................................$99.99

Helping You Make Wood Work ®

27


Router Accessories

Router Base Plate With Centering Pin

Butterfly Inlay Template

Making your own butterfly template quick and easy with the butterfly inlay template. The template is made from tough, thick acrylic for longevity and perfect fitting inlays and features six undercuts on the outside edges to make removing the template from your workpiece easy. Seven different size butterflys from 1" x 111/16" to 27/16" x 33/4" for a variety of applications. Use in conjunction with our Router Inlay Set 09I16 and Double Face Tape 15D25. 146903 butterfly inlay template..............$24.99 09I16 router inlay set............................$42.99 15D25 dbl. face tape, 1" x 36yds...........$20.99

Bench Mate Non Slip Pad

Large 24" x 48" non slip pad allows you to work without the limitations of clamps or vises. Ideal for all woodworkingjobs using a router, belt sander, pad or random orbit sander or working with hand tools. Unique web like design allows dust and chips to drop through the pad. To clean, rinse with water and lay flat to dry. 123633 ....................................................$10.99

Hinge-Mate™ II

Lets you accurately set hinges in minutes. Use it for doors, strike plates, boxes, or other edge routing projects. For hinges 1" - 5" long on stock up to 13/4" thick. Precision made of extruded aluminum with built-in clamps, hinge setting gauge, plus scales and guide pins for door and jamb mortising. Includes special 1/2" dia. carbide bit with top bearing and storage case. 06Y01 ..................................................... $199.99 06Y03 replacement 1/2" carbide bit......... $34.99

CMT 2050 Blade and Bit Cleaner

Easily removes resin, gum and pitch without harsh or hazardous chemicals. Just wet the surface, allow a few minutes to penetrate, and wipe of the build up. 18 oz. spray bottle. 817541 . .................................... $12.50

28

This unit is predrilled for all the routers listed below and includes a cleverly designed centering pin that centers the guide to the router collet. Simply install a Porter-Cable style guide, use the centering pin to line-up the base plate concentric to the collet, install your bit. Fits the following models: Sears Models 315.275 000-100-110, 315.175 070-040-050-060; Ryobi; Makita 3612 and 3621; Milwaukee 1615/1616/1619 series; Hitachi; Bosch 1615 and 1617/1618 series; DeWalt DW616/618 series, DW621, and DW625; Fein FT-1800; Elu 177; Porter Cable 690 series, 7529, and 8529; and Freud FT2000E. Complete with screws and installation instructions. 144931 .......................................................$26.99

TurnLOCK™ Sign Making Jigs

The SignCrafter features a 7" diameter clear base plate with centering pin, 5/ " and 7/ " TurnLock™ 8 16 bushings molded of durable 3 resin, /8" diameter core box carbide-tipped router bit, self-clamping bars for boards up to 12" wide, and 4 metal rails with joiners for boards up to 36" long. For use with up to 18 letters can be used at once. Includes 2 sets of 11/2" and 21/2" horizontal letters and numbers - 164 in total! The SignPro has all the features of the SignCrafter, plus enhanced metal-nosed TurnLock™ bushings, 1/ " diameter core box carbide-tipped router bit, 4 low-profile c-clamps instead of clamping bars for superior performance an improved metal rails and joiners for increased precision. SignPro also adds 2 sets of 11/2" and 21/2" vertical numbers - 204 in total! 146219 TurnLOCK™ SignCrafter................$49.99 147862 TurnLOCK™ SignPro...................... $57.50 148659 horizontal letter set, 11/2"............... $9.99 148660 horizontal letter set, 21/2"............... $9.99 148661 vertical number set, 11/2"............... $9.99 148662 vertical number set, 21/2"............... $9.99 149551 sign jig rout. bits, 1/4", 3/8", 1/2".... $21.99

WHITESIDE Brass Set-Up Gauges & Precision Guide Bushings

perform a variety of functions, from setting depth of cut on a plunge router to setting bit height or fence depth on the router table. Stack them together to combine measurements from 1/8" to 17/16". Brass gauges will not damage tool or bit edges. Set includes: 5 bars, measuring 1/8", 3/16", 1/4", 3/8", and 1/2" square. 144932 21/2" long gauges.......................... $17.99 836311 4" long gauges..............................$20.99 148156 3/8" OD bushing............................$15.99 147853 7/16" OD bushing...........................$14.99 147934 5/8" OD bushing............................$14.99

Credit Card Orders: 800 225-1153

CMT Bowl And Tray Router Template Kit

Show off your woodworking skill with a finely crafted bowl or tray using your router and this new method of creating bowls and trays. A turned bowl can be a very elegant project but many woodworkers are apprehensive about using a lathe. Snack trays make great gifts and this kit makes it easy. The CMT Bowl and Tray Router Template Kit includes two unique bowl and tray templates, a bowl and tray router bit with bearing, router collet extension and an instructional DVD. 149502 .....................................................$99.99 149503 quarter bowl tray template #11.$17.80 149504 oval bowl tray template #12..... $22.30 823066 bowl and tray bit set.................. $62.99 827414 router collet extension.............. $53.99

Router Speed Control

Electronically varies the speed of your router. This means you’ll have less burning, tearout, noise and tool wear, and safer use of large diameter panel raising bits. Use it with your router, or any shop tool that has a motor with replaceable brushes. You'll get full horsepower and torque at all speeds—from 0 to full RPM. Works on routers up to 3HP and/or 15 Amps. Features a replaceable fuse for circuit protection, variable speed dial, 3-position speed switch (variable-off-full) and belt clip. 142770 ..................................................... $47.99

Brass Router Bushing Set

Set comes in a durable blowmolded case and contains 2 lock nuts and 8 guides with 5/16", 3/ ", 7/ ", 1/ ", 8 16 2 5/ ", 3/ ", 51/ " 8 4 64 and 1" outside diameters. All guides protrude 0.240" to work with any template material of 1/4" thickness and larger. Fits all routers with Porter-Cable style sub-bases. 144625 10-pc. set with case..................... $31.99 144688 5/16" OD x 1/4" ID.............................. $7.19 144689 3/8" OD x 9/32" ID.............................. $7.19 144690 7/16" OD x 11/32" ID............................ $7.19 144691 1/2" OD x 13/32" ID............................. $7.19 144692 5/8" OD x 17/32" ID............................. $7.19 144693 3/4" OD x 21/32" ID............................. $7.19 144694 51/64" OD x 5/8" ID............................ $7.19 144695 1" OD x 7/8" ID.................................. $7.19 144696 bushing lock nut.............................$3.59

Free Technical Advice: 800 535-4486

www.woodcraft.com


Router Accessories

WOODPECKERS® Router Table Insert Plates

A

These plates are stronger and less prone to warp, flex or sag than other aluminum, phenolic, polycarbonate or acrylic router plates. Durable, low friction anodized coating on the aluminum model makes it easier for wood to slide across the plate. Besides superior material, each Woodpeckers Router Plate features eight top accessible fine pitch leveling screws and two adjustable spring loaded plungers to make it easy to achieve a flush, perfect fit in your router table opening. Included are (3) molded ABS resin locking rings, a brass starting pin, spanner wrench and router mounting screws. The ring opening sizes are 1", 13/16" and 25/8". The router plate itself has a 39/16" opening to fit any commonly available router bit. Dimensions are 91/4" x 113/4" x 3/8" thick. The plate listed for PC 690/890 will fit most routers with a 3-hole mounting pattern including Porter-Cable 690 and 890 Series routers. The plate listed for PC 7518 will fit many routers with a 4-hole mounting pattern including Porter-Cable 7518 and Triton. Both plates have pre-drilled access holes for routers with built-in lifting mechanisms. 148337 aluminum, for PC 690/890.........$99.99 148338 aluminum, for PC 7518.................$99.99 830478 phenolic, for PC 690/890............$59.99 147785 (A) phenolic, for PC 7518..............$59.99

WOODPECKERS® Model 420 Router Lift

The Model 420 Router Lift combines instant elevation change with microadjustment to dramatically reduce the time it takes to change a router bit while allowing the user to “dial in” bit height for precision milling of stock. With a simple twist of the spring-assisted lift wrench, the router motor is free to be moved to any vertical location without any other action required. Fine, precise bit height changes are equally as effortless by “dialing” the thumb-wheel to make accurate adjustments across a 3/4" range. This combination of rapid elevation change and micro-fine adjustability will save you time and increase the accuracy of your entire table based routing operations. This heavy-duty Router Quick-Lift is designed for the most demanding routing operations. The top plate is cast and ground aluminum “jig” plate offering superior stiffness and

WOODPECKERS® RF-3 Router Table Fence

Heavy-wall triangle shaped aluminum extrusion of the fence body incorporates integral dust collection with standard 21/4" dust port. The RF3 design also features melamine coated MDF fence faces that adjust for different bit diameters and 1/4" T-slots on front and rear for featherboards and to adapt to most positioning jigs. Use two of the Universal Track Clamps to use the fence with router tables without positioning T-tracks. 149884 RF3 router fence.........................$169.99 148486 univ. track clamp........................... $16.99

8-Piece Insert Ring Set includes a full complement of sizes to accommodate virtually any router bit. The key to safe, effective routing operations on a router table is keeping the gap around the cutter to a minimum. Includes: Solid, 5/ ", 7/ ", 13/ ", 15/ ", 17/ ", 21/ " and 23/ " openings. 8 8 8 8 8 8 8 150673 .....................................................$39.99 3-Piece Blank Router Plate Insert Rings Blank insert rings can be drilled or routed for a custom size. Each ring is molded of ABS reinforced with polycarbonate. Includes three (3) blank rings. 150995 ..................................................... $19.99 Freehand Bit Guard provides a pivot point to rest your material while you advance the workpiece into the spinning router bit. An integral shield keeps dust from flying up into your face while the laminated birch plywood and phenolic frame channels chips to the 21/2" dust port. Attaches directly to any Woodpeckers router plate or router lift. 148871 .....................................................$29.99 Router Table Insert Installation Template Using this template and a template router bit you can rout out a perfectly sized 91/4" x 113/4" opening for any of the Woodpeckers router plates and lifts in your custom router table. CNC machined from 3/4" MDF for a perfectly smooth bearing surface and large enough for clamps. Perfect template adding a router solution to your table saw extension table. 150996 ..................................................... $14.99

rigidity. The carriage with integral motor clamping mechanism (sized for the industry standard PC 7518, sold separately) is accurately machined from solid aircraft grade aluminum and rides on large 1.025" ground and polished steel posts and precision machined guide bearings. There is even a “brake” connected to the micro-adjust gear-box to lock the carriage when even the slightest change in bit height is unacceptable. Each router plate is machined in a CNC milling machine to exacting tolerances to give you a perfect fit in router tables with a 91/4" x 113/4" opening. The plate also features engraved scales to simplify fence positioning while eight threaded setscrews are accessible from above for leveling. Adjustable brass plungers ensure a perfect fit in the router table opening. The plate has a 39/16" bit opening which is specially machined to accept the included molded insert rings with 25/8", 1" and 13/16" guide bushing openings. The router lift is complete with threaded starting pin, spanner wrench and detailed instructions. 149078 model 420 router lift.................. $329.99 821719 31/4 HP router motor only.......... $299.99 149529 motor pads, 31/2 " dia...................$19.99

WOODPECKERS® Phenolic And MDF Router Table Tops

Woodpeckers has been manufacturing commercial grade router table components for over 15 years and that wealth of experience is no more evident in the quality construction of their MDF core and solid phenolic router table tops. Choose phenolic laminated to MDF for flatness, while solid phenolic offers the advantages of the ability to withstand a variety of temperature and high humidity environments. 3/4" thick solid phenolic top uses a low friction, high hardness mineral based top layer that is harder and lasts longer than PVC. 13/8" thick MDF top is laminated on both sides with a top layer of Micro-Dot laminate that greatly reduces drag from sliding wood over the router table top. Both tops are machined in a CNC router to achieve tight tolerances and feature anodized aluminum T-tracks for fence positioning and combination miter channel/T-track bolted from underneath. Table size is 27" x 43" or 231/2" x 311/2" with 91/4" x 113/4" router opening centered length wise and offset back approximately 161/2" or 13" from front. Offset top has router opening rotated 90-degrees and centered along the 231/2" dimension and offset back approximately 10" from front. Offset router table tops are the configuration of choice when using an incremental positioning device. 151087 27" x 43" phenolic top................ $299.99 151086 24" x 32" phenolic top................$219.99 151149 27" x 43" MDF top.......................$199.99 148688 24" x 32" MDF top.......................$139.99 149228 24" x 32" offset MDF top............$139.99

WOODPECKERS® Adjustable Height Premium Router Table Stand

Improved steel leg set for your router table top is adjustable in height to add a greater degree of comfort and control for most woodworkers. Constructed of heavy 14-gauge powder coated steel made in the U.S.A. the stand is adjustable in height from 36" to 42" including router table top. Choose the 27" x 20" size for typical router table tops measuring 32" x 24", or the larger 37" x 20" size for router tables tops 42" and wider. Both stands feature two separate braces to further support the center area of your table. Stands can be used with both center and offset style router table tops. Each stand includes four adjustable non-skid levelers, assembly hardware and instructions. Wheel Kit includes two fixed wheels, one swivel caster with foot pedal, mounting hardware and instructions. 150992 27" x 20" router table stand.......$169.99 150993 37" x 20" router table stand.......$189.99 150994 wheel kit for above stands...........$49.99

Don't See It? Can't Find It? woodcraft.com has over 15,000 items

Helping You Make Wood Work ®

29


Router Accessories

LEIGH Super Jigs

offer extraordinary joint making capability at exceptional price points. Super Jigs are available in three sizes (widths), 12", 18" and 24" to satisfy the needs of every woodworker and every budget. No other jigs equal the versatility and precision of LEIGH Super Jigs. Variably spaced Through and Half-blind dovetails are standard on all Super Jigs. The infinitely adjustable one piece fingers are easily positioned for any joint pattern and you’re always guaranteed a half pin at each edge of the joint, regardless of board width. A cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template. You can rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass. And with Super Jigs, you are not limited to one bit and one depth of cut. Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. The finger assembly can also produce two sizes of box joints, 5/ " and 5/ ". The amazing joint making capability 16 8 of Super Jigs is due in part to the revolutionary new LEIGH E-Bush. Very precise adjustments for fit are made easily with the E-Bush. Settings are changed using the included pin wrench, and the uniquely shaped locking nut makes tightening the E-Bush a snap. Markings clearly indicate the adjustment direction necessary for the desired change. A simple twist of the E Bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails. Easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non slip material applied to each clamping surface. Includes: 1½ /2"-8° dovetail bit, 1½ /2" 14°- dovetail bit, 5/16" straight bit, 1½ /2" to 8mm collet reducer, sliding dovetail fence, Half-blind bridge piece material, E-Bush, fully illustrated User Guide and Instructional DVD. 148134 Super 12" dovetail jig................. $249.00 148151 Super 12" w/acc. kit...................$379.00 148135 Super 18" dovetail jig................. $339.00 148152 Super 18" w/acc. kit...................$479.00 148136 Super 24" dovetail jig.................$419.00 148153 Super 24" w/accessory kit........ $549.00 148973 replacement E-bush..................... $11.99 LEIGH Super Jig Accessory Kits include a Vacuum & Router Support (VRS) and 7-Piece Boxed LEIGH Router Bit Set. Leigh’s ingenious VRS provides router support and dust-free routing. 7-Piece Bit Set features 8mm shank bits. Includes: 1/4" x 8°dovetail; 5/16" x 8° dovetail; 3/8" x 8° dovetail; 7/16" x 8° dovetail; 1/2" x 10° dovetail; 1/2" x 12° dovetail; 1/ " x 18° dovetail. 2 148147 Super 12" Jig acc. kit...................$159.00 148148 Super 18" Jig acc. kit..................$169.00 148149 Super 24" jig acc. kit...................$169.00

www.woodcraft.com

30

LEIGH D4R PRO Dovetail Jigs

The new D4R PRO-24 jig features a one piece aluminum extrusion base with machined-in non marring textured clamping surfaces and machined-in side stops on the top and front of the jig body. The top side stops have a 3/8" recess for rabbeted boards. Like its predecessor, the D4R easily produces handmade looking dovetail pins and tails. Perfect fitting joints for tiny boxes or large case pieces can be produced in a variety of patterns by simply changing the adjustable guide fingers. Wooden pieces are clamped into the jig quickly and easily with the cam action clamps which can be adjusted for different stock thickness in seconds, or used to repeat the same clamp tension instantly. Through or Half-blind dovetails can be easily set up by simply flipping the finger assembly over. Jigs are meticulously engineered and constructed. Accepts boards up to 24" wide. Maximum pin thickness 11/4". Includes three carbide router bits, a 1/2" D x 8° x 8mm dovetail bit and a 5/16" x 1" x 8mm straight bit for through dovetails, and a 1/2" D x 14° x 8mm dovetail bit for half blind dovetails. Also includes a 1/2" to 8mm collet reducer and a 7/16" template guide bushing, comprehensive instruction manual and instructional DVD. 151003 D4R-PRO dovetail Jig .................$499.00 148154 D4R w/acc. kit .......................... $699.00 LEIGH D4 Accessory Kit includes a Vacuum & Router Support (VRS) and 12-Piece Boxed LEIGH Router Bit Set. LEIGH’s ingenious VRS provides router support and dust-free routing. 12 Piece Bit Set features 1/2" and 8mm shank bits. Includes: 1/4" x 8° dovetail; 5/16" x 8° dovetail; 7/16" x 8° dovetail; 11/16" x 8° dovetail; 13/ " x 8° dovetail; 7/ " x 11/ " CL straight; 1/ " x 11/ " 16 16 4 2 4 CL straight; 1/2" x 10° dovetail; 1/2" x 12° dovetail; 1/ " x 18° dovetail; 1/ " to 8mm collet reducer. 2 2 148150 .................................................. $239.00

LEIGH Finger Joint Templates

Finger joints add visually striking symetrical design to corner assemblies. Unlike dovetails, finger joints do not interlock mechanically but their enormous glue surface area makes them as strong as dovetails throughout the life of today's modern adhesives. Leigh’s versatile 24" F3 Finger Joint Template is the most comprehensive and accurate jig of its kind. The F3 produces eleven sizes of square joints from 3/32" to 1/2" and can produce three sizes of square halfblind finger joints. Leigh's unique patented e-Bush system, included with the F3, guarantees a precisely fitted finger joint every time. Add the Leigh F24 or F18 Finger Joint Template to your respective Super Jig to rout an additional six sizes of finger joints and two sizes of square half-blind finger joints. Complete with instructions. 151135 F3 for D-24 series dovetail jigs..$199.00 148143 F24 for super 24 dovetail jig......$199.00 148142 F18 for super 18 dovetail jig......$179.00

Credit Card Orders: 800 225-1153

LEIGH Multiple Mortise And Tenon Attachment

Replaces the dovetail assembly of your D4R jig to make perfect through or blind tenons, box or finger joints. Includes complete instruction booklet and 1/ " spiral cut router bit for joints 1/ " x 5/ " to 1 1/ " x 2 2 8 2 21/2". Jig requires 5/8" OD guide bushing to operate. For small joints to 5/16" x 5/8" a 5/16" spiral cut router bit and 7/16" OD guide bushing are required (not included). 03K55 ....................................................$259.00 Extra Bits for MMT Attachment. Two flute, spiral upcut, high speed steel. 03K52 1/2" diameter 1/2" SH....................$26.99

LEIGH Vacuum & Router Support

The ultimate waste control and router support for your LEIGH dovetail jig - the revolutionary LEIGH VRS (Vacuum & Router Support). The router is positioned between the control arms attached to the vacuum chute below, and the arms are adjustable to suite any size router base. The vacuum chute glides effortlessly from side to side on nylon rollers and automatically follows the router when routing the joint or when the router is parked off to the side. The chute is always in the perfect position to catch the chips being thrown out by the high-speed router bit action. Chips and sawdust are drawn into the vacuum chute and down through the vacuum hose. Comes complete with two adaptors to fit all popular vacuum hose sizes from 1" to 2½". Can be used with a small shop vacuum or large dust collection system. Easily attach and use on any LEIGH Jig without jig modification. All mounting hardware is included. 148141 for D4R PRO-24, 24" dovetail jig.. $99.00 148139 for Super 24" dovetail jig..............$89.00 148138 for Super 18" dovetail jig..............$89.00 148137 for Super 12" dovetail jig.............. $79.00 WoodRiver® Dovetail Bits, 8mm Shank. These bits have 60% more metal than 1/4" shanks giving you greater stiffness for enhanced usability and increased feed rates in hardwoods. Requires 8mm reducer for 1/2" collet routers. 143264 1/4" x 8° dovetail, 8mm SH...........$17.99 143274 5/16" x 8° dovetail, 8mm SH..........$17.99 143258 3/8" x 8° dovetail, 8mm SH...........$17.99 143263 7/16" x 8° dovetail, 8mm SH..........$17.99 143259 1/2" x 8° dovetail, 8mm SH...........$17.99 143260 1/2" x 10° dovetail, 8mm SH.........$17.99 143261 1/2" x 14° dovetail, 8mm SH..........$17.99 143262 1/2" x 18° dovetail, 8mm SH.........$17.99 143275 5/16" straight, 8mm SH..................$17.99 143265 collet reducer 1/2" to 8mm.............. $8.39

Free Technical Advice: 800 535-4486

www.woodcraft.com


Router Accessories A

LEIGH Frame Mortise & Tenon Jigs

The mortise & tenon is the strongest and most versatile of woodworking joints. With the Frame Mortise and Tenon family of jigs and a plunge router, every woodworker can easily produce this incredible joint with unmatched accuracy and speed. All of the guides and bits used with the original are common to both jigs allowing both FMT jigs to produce a vast array of mortise and tenon sizes from unbelievably small joints to massive 5" joints. Both jigs work with virtually any plunge router to produce precise, straight, double, angled and compound angled joints with sizes ranging from 1/16" x 1/8" to 1/2" x 5". As the name implies professional woodworkers will rely on the cast and extruded aluminum construction of the FMT PRO with cam-action speed clamps, retractable sight and integral dust collection system. The new Super FMT (shown below) incorporates the functionality of the original FMT at a fraction of the cost! The jig is constructed of heavy gauge rugged steel frame with multi-position clamping to clamp boards up to 3" x 5". Super FMT includes: universal sub-base that attaches to virtually any plunge router; two F-style clamps with 3" thickness capacity and adjustable side stop fence for Tenoning. Both jigs include five 5/ " joint guides (5/ " x 1/ ", 3/ ", 1", 11/ " and 11/ "); 16 16 2 4 4 2 joint guide stand; 5/16" HSS spiral upcut bit with 1/2" shank; mounting hardware and as you would expect from Leigh Industries a comprehensive illustrated user guide. The vacuum box adds to the convenient operation of the Super FMT jig and like the FMT PRO includes adapters to connect to almost any shop vacuum or dust collection system. 822034 (A) FMT PRO jig............................$899.00 150724 (B) Super FMT jig (below) ..........$449.00 150725 vacuum box for Super FMT.......... $49.00 144038 1/4" guide set (8 guides)................$59.00 144039 3/8" guide set (4 guides)...............$33.00 144040 1/2" guide set (4 guides)................$33.00 Onsrud HSS Bits 03K42 1/4" D, 3/4" CL, 1/2" D......................$20.99 03K43 3/8" D, 11/4" CL, 1/2" D....................$24.99 03K52 1/2" D, 11/2" CL, 1/2" D....................$26.99

B

WoodRiver® Half-Blind Dovetail Jig

This dovetail jig has a rigid steel body with steel clamping bars to hold the work piece in position while a CNC machined, solid aluminum template guides your router to make half-blind or half-blind rabbeted dovetail joints. 1/2" to 1" thick drawer sides and 5/8" to 1" thick drawer fronts up to 12" in width are possible. Both sides of the half-blind dovetail joint are routed at the same time for a precise match every time. Instruction manual included. Requires

A

B

Porter-Cable OmniJig Joinery Systems

The “new” Porter-Cable Omnijig Joinery Systems are the ultimate Dovetail Jigs. Factory preset stops for templates and the innovative router bit depth gauge (pod) eliminates trial and error. A router stabilizer bar to prevents router tipping, textured work surfaces prevent material movement, on-board instructions and color coded dovetail “recipe” card truly simplify use. Each system includes an instructional DVD with Norm Abram. 3 year limited warranty. The 24" Omnijig features an adjustable finger template, for variable-spaced half-blind and through dovetails. Specifications: wood capacity: 1/8” to 11/2”

PORTER-CABLE 12" Dovetail Jig

Model 4210. If you’ve put off cutting dovetails with your router because of the complicated setup of dovetail jigs, wait no longer. Porter-Cable’s new 12" dovetail jig will have you up and cutting dovetails in minutes. This jig is designed with patented alignment lines and a router bit depth stop so set-up is easy. Simply adjust the template so the alignment marks line up with your work piece, set your router bit depth according to the depth stop, and start routing. This jig will cut half-blind dovetails, rabbeted half-blind dovetails, and dovetail dadoes. The heavy-duty cam-type clamps with sandpaperbacked locking bars provide a solid grip for the wood. The template is CNC machined aluminum to provide superior accuracy. Handles stock 1/4" to 11/8" thick up to 12" wide. Includes: half-blind/ dado combo template, 7° carbide dovetail bit with 1/ " shank, template guide and lock nut. 2 146048 .....................................................$132.99 Deluxe Model 4212. All the features of the model 4210 PLUS through dovetails and box joints with an additional CNC machined aluminum template.

144692 144696 148095 148096

1/ "-14° Dovetail Bit (not included) 2 and 5/8" template guide bushing (not included). 148094 . ......................................... Half-blind Dovetail Jig, 12"........$59.99 129676 ................................................. 1/ "-14° dovetail bit, 1/ " shank.$13.79 2 4 5/ " OD template guide bushing..... $7.19 8 template guide bushing lock nut... $3.59 1/ " box joint template..................$23.99 2 1/ " box joint template..................$23.99 4

in thickness; length: 44”; Height: 131/2"; Depth: 181/2"; Weight: 66lbs. Unit includes 24" variable finger template, left and right template stops, dovetail bit, straight bit, 7 template guides, screwdriver, wrench, and a bit depth gauge. 835090 (A)........................ $599.99 The 16" Omnijig features a fixed-space finger template to cut half-blind dovetails with a single router pass. The template may also be used for rabbeted half-blind and sliding-tapered dovetails. Specifications: wood capacity: 1/8" – 11/2" thickness; length: 36"; height: 13"; depth: 19"; weight: 45lbs. Includes 16" single pass half-blind/sliding tapered dovetail template, left and right template stops, dovetail bit, straight bit, 4 template guides, screwdriver, wrench and a router bit depth gauge. 835089 (B)................................................ $429.99

Includes Model 4210 components plus: through dovetail/ box joint combo template, 1/ " shank carbide-tipped 2 straight bit, second template guide and lock nut. 146049 .................................................$179.99 Through Dovetail & Boxjoint Template, allows for 1/ " through dovetails and box joints. Includes 5/ " 2 8 template guide and lock nut, 13/32", 1/2" shank carbide tipped straight bit. 831157 model 4213................................... $74.99 Miniature Template Kit, allows for miniature halfblind dovetails, through dovetails, and box joints. Includes 3/8" & 5/16" template guide and lock nut, 9/ ", 7° dovetail bit, 3/ " straight bit, small left and 32 16 right offset guides. 830583 model 4215.................................$86.99 Replacement Bits from Whiteside. 146433 17/32" D x 7° dovetail, 1/2" SH....... $21.99 148965 17/32" D x 7° dovetail, 1/4" SH....... $21.99 146432 13/32" D x 1" CL straight, 1/2" SH.... $19.99 148964 13/32" D x 1" CL straight, 1/4" SH.... $19.99 146434 straight + dovetail set, 1/2" SH ....$34.98

Frame And Panel Templates

A B

Each set is machined on CNC equipment for a precise fit every time. The sets are made of wear resistant and dimensionally stable 3/8" thick HDPE, each contains twenty templates designed for 91/2" to 221/2" wide doors. Each set includes two sets of indexing fences, which attach to indexing holes in the template, allowing you to center and square your work perfectly. The Frame & Panel Master indexes, centers and clamps the work and template together for machining. Large feed handles provide maximum control and safety. For more info, visit woodcraft.com! 142823 frame and panel master...........$106.99 142824 (A) cathedral templates (20).....$104.99 142825 (B) arched templates (20).........$104.99

Helping You Make Wood Work ®

31


Router Accessories KREG Precision Router Table Setup Bars A KREG Precision Router Table System

The 36" Precision Router Table Fence features a T-square style design which keeps the fence permanently parallel to the miter slot. A fully-enclosed aluminum extrusion enhances dust collection while two fully independent fence faces provide zero-clearance support. The 24" x 32" Precision Router Table Top is made from a vibration and noise resistant MDF which features an Easy-Slide™ Micro-Dot high-pressure laminate. The durable MDF top is even reinforced by two steel support struts which keep it from bending or bowing over time. A “combo” miter channel / T-slot works with a wide variety of accessories. A standard sized insert plate (91/4" x 113/4") has been designed to mount to any router utilizing your router’s base plate and easy to use template (included). Completing the system is the optional Universal Steel Stand. This rugged steel stand is adjustable from 31" to 36" in height and is powder coated for durability. The complete Router Table includes Router Table Top, Router Table Fence and Universal Steel Stand. 148837 Router Table Complete.............. $499.99 148835 Router Table Top.........................$179.99 148836 Router Table Fence.....................$199.99 148008 Universal Steel Stand.................$149.99 148166 steel casters (4)............................$59.99 148436 (A) True-FLEX featherboard.......... $19.99 Kreg Router Table Switch Accessories The Kreg Multi-Purpose Router Table Switch adds safety and convenience to your router table. Precision Router Table Fence Stop takes the guess work out of routing specific lengths for dados and tenons. 149970 router table switch........................$34.99 149971 router table fence stop.................$24.99 146053 fence micro-adjuster..................... $14.99

KREG Precision Benchtop Router Table

Fetures a 16" x 24", 1" thick top is constructed of an MDF core sandwiched between high-pressure laminate. The top is CNC machined with a 91/4" x 113/4" opening and also includes a phenolic, 2" hole insert and combination miter & accessory T-Track. The sturdy steel stand measures 151/2" tall and features splayed legs for sure-footing during demanding routing tasks and lower braces on all four sides that are pre-drilled for adding a shelf or enclosing that area for dust control. The Precision Router Fence is constructed of extruded aluminum with many integral features like offset jointer routing, adjustable sub-fences, bit guard and 21/2" dust port. A knob on either end of the Benchtop Router Table Fence allows for quick adjustments while locking the fence firmly in position. Includes detailed instructions for mounting your router. 148070 .................................................. $229.99

32

KREG Precision Router Table Lift

For customers who demand a complete routing system, now there’s no need to look any further than KREG. The Precision Router Table Lift makes even the most precise router height adjustments quick and easy through its patented Quick-Lift system. Lift mechanism mounted to heavy gauge aluminum insert plate machined for a 91/4" x 113/4" opening. Carriage with integral motor clamping mechanism (sized for the industry standard PC 7518, sold separately) is accurately machined from solid aircraft grade aluminum. Micro-Adjust thumb wheel eliminates the need for a crank handle while the spring-assisted lift wrench makes rapid height adjustment easy. Simple, easy to use lift-brake and adjustable reference scale can be set to zero from any bit position. Includes three molded insert rings with 25/8", 1" and 13/16" guide bushing openings. 150514 precision router table lift........... $329.99 821719 31/4 HP router motor only.......... $299.99

These new Precision Router Table Setup Bars make adjustments to router tables, drill presses and table saws very simple and very precise. Unique design straddles the router bit or saw blade to allow for more precise height adjustment. A step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. An extension on the end of each setup bar can be used to set fence depth of a table saw blade or router bit as well as setting the depth stops on a drill press or plunge router. Made of soft aluminum designed to prevent damage to your router bit or saw blade if contact is made during setup. Sizes include: 1/8", 3/16", 1/4", 5/16", 3/ ", 7/ " and 1/ ". 8 16 2 150664 .....................................................$39.99

A

E

D

B

G C H J I F KREG Beaded Face-Frame Router Bits

KREG Precision Beaded Face-Frame System

Beaded face-frames are a great way for you to add detail, richness, and value to your cabinetry and furniture. Kreg Tool has designed a system that will help you build beaded face-frames faster, easier, and for a lot less money than ever before. The fence system works seamlessly with the KREG Precision Router Table, however, it can be easily installed on almost any full-sized router table via the miter gauge slot. Complete system includes: heavy duty aluminum fence with integrated tape measure; zero-clearance, ball-bearing sliding base; integrated clamp and precision router table stop; 1/ " precision router table set-up bar and 1/ " dowel 4 2 pin; 1/4" x 11/2" face-frame notching bit; 1/4" standard face-frame beading bit and instructional DVD. 150515 beaded face-frame system........ $499.99

PRAZI ChestMate™ Dovetail Jig

While dovetails are the perfect accent on many projects, few large projects rarely fit the confines of traditional router dovetail jigs. That’s why the Prazi ChestMate will be your dovetail jig of choice for those larger projects. The ChestMate is constructed of cast

Credit Card Orders: 800 225-1153

Kreg Tool has designed specialized router bits specifically for use with the Precision Beaded Face-Frame System. These bits are manufactured with 1/2" shanks and high grade carbide tips for durability. For each beaded profile, a beading bit and a notching bit are needed to complete the shaping and notching of the beaded face frame joint. Notching bits are available in 11/2" and 2" sizes to allow one pass operations in 11/2" and 2" wide rails and stiles. 150516 (A) 1/4" x 2" FF notching bit...........$59.99 150517 (B) 1/4" x 11/2" FF notching bit.......$54.99 150518 (C) 1/4" standard FF beading bit...$34.99 150519 (D) 3/8" x 11/2" FF notching bit......$54.99 150520 (E) 3/8" x 2" FF notching bit...........$59.99 150521 (F) 5/16" standard FF beading bit .$34.99 150522 (G) 3/8" standard FF beading bit .$34.99 150523 (H) 3/8" s-profile FF beading bit.....$34.99 150524 (I) 3/8" m-profile FF beading bit.....$34.99 150525 (J) 3/8" h-profile FF beading bit......$34.99

aluminum with clamping components to hold the jig tightly on the work piece during routing. Create your own dovetail arrangements with any width stock (not limited to 24") and thickness ranging from 1/2" to 1". 7° and 14° through dovetail templates are included with added templates for making four sizes of precision box joints, mortise joints, dowel joints and two sizes of random spaced box joints. Use the simple instructions or DVD to create strong joints with your router. Requires 5/8″" x 7° or 3/4" x 14° dovetail router bit (not included) and 5/16" straight router bit (not included) for dovetail joints, 3/8" straight router bit (not included) for box joints and 5/8" template guide bushing (not included). 837243 ...................................................$109.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Router Bits

Core Box Bits

Anti-Kickback Router Bits

Core box bits produce a rounded bottom groove for fluting, panel edging and sign making. Two flutes, carbide. 144121 1/4" D x 1/4" CL, 1/8" R, 1/4" SH......$14.99 144120 3/8" D x 3/8" CL, 3/16" R, 1/4" SH....$14.99 144119 1/2" D x 3/8" CL, 1/4" R, 1/4" SH......$14.99 144118 3/4" D x 5/8" CL, 3/8" R, 1/4" SH. .... $19.99 147240 3/4" D x 3/8" CL, 3/8" R, 1/2" SH. .... $22.99 144117 1" D x 3/4" CL, 1/2" R, 1/2" SH....... $24.99 147241 11/2" D x 7/8" CL, 3/4" R, 1/2" SH.... $36.99

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operation. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 400 grit wet grind on the K-20 German carbide produces a clean, extremely sharp, and durable cutting edge. Bit bodies are coated to help prevent resin build up and make resin removal easier. All bits are carbide tipped. D = diameter, CL = cutting length, R = radius, SH = shank diameter

Plywood Panel Bits

Round Over Bits

For uniformly rounded edges. Changing the guide bearing to the 3/8" bearing listed below converts round over bits to Beading Bits for decorative period edging on furniture. 147243 1/16" R, 1/4" SH.........$17.99 129657 1/8" R, 1/4" SH..........$17.99 147244 5/32" R, 1/4" SH........ $17.99 147245 3/16" R, 1/4" SH....... $18.99 129659 1/4" R, 1/4" SH......... $18.99 147246 5/16" R, 1/4" SH....... $19.99 129658 3/8" R, 1/4" SH......... $19.99 129660 1/2" R, 1/4" SH......... $24.99 147247 1/8" R, 1/2" SH.......... $17.99 129661 1/4" R, 1/2" SH.........$18.99 147248 3/8" R, 1/2" SH......... $19.99 129662 1/2" R, 1/2" SH......... $24.99 151189 3/4" R, 1/2" SH......... $43.99 129758 3/8" O.D. bearing.......$4.79 4-Piece Round Over Beading Bit Sets. Include 1/8", 1/4", 3/8", and 1/2" radius bits. 140806 1/4" SH, 4-pc. set . .. $79.99 140807 1/2" SH, 4-pc. set....$84.99

Straight Bits

Useful in dadoing, general grooving, sign making, through cutting. 1/ " Shank, two flutes, carbide. 4 144146 3/16" D x 1/2" CL....... $10.99 144147 1/4" D x 3/4" CL.........$10.99 151178 1/4" D x 1" CL........... $10.99 151179 5/16" D x 1" CL.........$10.99 151180 3/8" D x 1" CL...........$11.99 144148 1/2" D x 3/4" CL.........$11.99 151181 1/2" D x 1" CL.......... $10.99 144149 5/8" D x 1" CL........... $13.99 151182 3/4" D x 3/4" CL.........$15.50 144150 3/4" D x 1" CL...........$14.99 Shank, two flutes, carbide. 151183 1/4" D x 3/4" CL.........$10.99 144151 1/4" D x 1" CL...........$11.99 151184 5/16" D x 1" CL..........$11.99 144152 7/16" D x 1" CL.......... $12.99 151185 3/8" D x 1" CL............$11.99 144153 1/2" D x 1" CL........... $12.99 151186 1/2" D x 11/4" CL.......$12.99 144154 1/2" D x 11/2" CL....... $14.99 144155 1/2" D x 2" CL........... $16.99 151187 5/8" D x 1" CL........... $14.99 144156 3/4" D x 1" CL...........$14.99 151188 3/4" D x 11/4" CL.......$16.99 144157 3/4" D x 11/2" CL....... $19.99

Sized to fit today’s slightly reduced plywood thicknesses. Two flutes, carbide. 144140 15/64" (1/4") D x 3/4" CL, 1/2" SH.... $10.99 144141 31/64" (1/2") D x 1" CL, 1/2" SH.......$12.99 144142 23/32" (3/4") D x 1" CL, 1/2" SH....... $14.99 144143 15/64" (1/4") D x 3/4" CL, 1/4" SH.....$10.99 144144 31/64" (1/2") D x 1" CL, 1/4" SH.......$12.99 144145 23/32" (3/4") D x 1" CL, 1/4" SH........ $14.99

Rabbeting Bit Sets

Cut five different widths with one bit. Change bearings for 1/4", 5/16", 3/8", 7/ ", 1/ ", up to 1/ " deep. 16 2 2 129687 rabbet set, 1/4" SH .$44.99 129688 rabbet set, 1/2" SH .$44.99

Table Edge Bits

45° Chamfer Bits

Chamfer bit cuts 45° bevels. 144124 1/2" CL, 1/4" SH........$21.99 129674 5/8" CL, 1/4" SH........ $24.99 144123 1/2" CL, 1/2" SH........$21.99 129675 5/8" CL, 1/2" SH........ $24.99 144122 11/4" CL, 1/2" SH...... $44.50

Biscuit Joining Router Bit Set

Each set features a 5/32” cutter, hex key and three bearings to cut slots for #0, #10 and #20 biscuits. 147994 1/4" shank.............. $34.99 147995 1/2" shank.............. $39.99

Create the classic edge dressing for solid wood table tops. 129678 21/2" D, 1/2" SH........ $54.99 129679 13/16" D, 1/4" SH...... $29.99

Panel Raising Bits

2" D or 21/2" D, 1/2" SH, ball bearing guides. 129670 ogee 21/2" D............ $54.99 129671 ogee 2" D ............... $39.99 129672 cove 21/2" D............ $54.99 129673 cove 2" D.................$39.99

A

B Bead And Flute Bits

Used to make matching flute and bead edges on 1/4" thick wood strips so they can conform to a curved surface. 1/4" shank. 129683 (A) 1/4" bead cutter .$24.99 129682 (B) 1/4" flute cutter .$24.99 129686 bead & flute set.....Save $5. ................................ $44.98

Three Wing Slotting Cutter Set

This seven piece set routes slots, grooves and rabbets. Vary the width of your slot from 1/16" to 11/16" by stacking cutters and shims. Depth of cut with bearing is 1/2". Set includes 1/2" arbor, 10 shims, 1/16", 3/32", 1/8", 5/32", 3/ ", 1/ " cutters and wooden box for 16 4 storage and protection of the pieces. 147473....................................$64.99

Porter-Cable Biscuits. 17J64 #20, tube/100.......... $12.99 16I20 #10, tube/125.......... $12.99 16K24 #0, tube/150............ $12.99

3-Piece Panel Raising Sets

Both sets include a 21/2" panel raising bit, rail bit and stile bit. 141287 ogee pattern set...$149.99 141296 cove & bead pattern set..... . .............................$149.99

1/ " 2

1/ " 4

Tongue & Groove Bit

Cuts material up to 3/4" thick. 140801 1/4" SH.................... $49.99 140802 1/2" SH.................... $49.99

Pattern Cutting Bits

For following templates and making plunge cuts. Cutter and bearing have same diameter. 1/ " Shank, two flutes, carbide. 4 129640 1/2" D x 1" CL............$17.99 129642 5/8" D x 1" CL........... $19.99 1/ " Shank, two flutes, carbide. 2 147239 3/4" D x 11/4" CL......$25.19 129641 11/8" D x 11/2" CL.... $29.99

Cove Router Bits For decorative edging with an inverted radius. 147249 1/4" R, 3/8" CL, 1/4" SH.$20.99 151190 3/8" R, 1/2" CL 1/4" SH .$26.99 129663 1/2" R, 1/2" CL 1/4" SH .$27.99 151191 1/4" R, 1/2" CL 1/2" SH .$24.50 151192 3/8" R, 1/2" CL 1/2" SH .$26.99 129664 1/2" R, 1/2" CL 1/2" SH .$38.39

Flush Trim Bits

Features two flutes. 129684 1/2" D x 1" CL, 1/4" SH.$14.99 129685 1/2" D x 2" CL, 1/2" SH.$19.99

Helping You Make Wood Work ®

33


Router Bits

Straight

Chamfer

V-Groove

Roundnose

Roundover

Beading

Cove & Bead

Roman Ogee

Freud’s Exclusive Router Bit Innovations Tico™ Hi-Density Carbide specially formulated to reduce wear & last longer.

Quadra-Cut™ 4-Cutter Design 2 Cutters Shear Up

2 Cutters Shear Down

1/ " 2

Shank 837545 15°A, 1" CL............ $34.99 828882 221/2°A, 7/8" CL...... $35.49 828728 45°A, 5/8" CL.......... $37.49 828883 45°A, 1" CL........... $63.99 834270 30°A, 3/4" CL......... $46.99

Flush Trim Bits

Bottom-mounted bearings for trimming laminate counter tops and doing pattern work. Two flutes design for fast cutting. 1/ " Shank 4 828729 3/8" D, 1" CL............$16.99 828731 1/2" D, 1" CL............$16.49

Perma-SHIELD™ Coating protects from

rust & heat build-up.

Freud Router Bits are the most innovative, precise and best performing bits on the market. All bits are carbide tipped unless noted. D=Diam.; CL=Cutting Length; R=Radius; SH=Shank Diameter; SC=Solid Carbide; A=Degree Angle

Round-Over Bits

Ideal for softening furniture edges & create decorative beads. 1/ " Shank 4 828852 1/16" R...................... $27.99 828706 1/8" R....................... $27.99 828707 3/16" R……………......$32.99 828708 1/4" R...................... $32.49 Quadra-Cut™ Design 1/ " Shank 2 815157 1/4" R...................... $38.99 828855 5/16" R..................... $35.99 828712 3/8" R...................... $36.99 828713 1/2" R...................... $48.99 828714 5/8" R...................... $51.99 828715 3/4" R...................... $60.49 834262 7/8" R....................... $93.99 815153 1" R...................... $110.99

Beading Bits

Add an attractive bead profile to furniture & millwork. 1/ " Shank 4 839088 1/16 R...................... $30.49 828857 1/8" R...................... $30.99 844630 5/32" R..................... $30.99 828717 1/4" R...................... $32.99 Quadra-Cut™ Design 1/ " Shank 2 840958 5/16" R..................... $35.99 828859 3/8" R...................... $36.99 828860 1/2" R...................... $48.99 839065 1" R...................... $110.99 840957 11/8" R.................. $132.49

34

1/ " 2

Shank 828733 1/2" D, 1" CL............$18.99 828734 1/2" D, 11/2" CL....... $20.99 828735 1/2" D, 2" CL........... $29.49

Traditional Bead Bits

Forms a single bead with a square shoulder. 1/ " Shank 4 828782 1/8" R..................... .$32.49 828783 3/16" R...................... $37.49 1/ " Shank 2 828900 1/8" R...................... $34.49 828901 3/16" R...................... $37.49

Cove & Bead Bits

Add distinctive design to cabinets, furniture, plaques and millwork. 1/ " Shank 4 828868 1/8" R....................... $37.49 828869 1/4" R...................... $43.49 Quadra-Cut™ Design 1/ " Shank 2 837595 1/8" R....................... $37.49 828870 1/4" R...................... $44.99

Round Nose Bits

Ideal for fluted millwork, signs & decorative veining. 1/ " Shank 4 828807 3/32" R, 3/16" D........ $20.99 828681 1/8" R, 1/4" D........... $20.49 828682 3/16" R, 3/8" D......... $22.99 828684 5/16" R, 5/8" D......... $28.49 1/ " Shank 2 828686 1/4" R, 1/2" D........... $35.99 828687 3/8" R, 3/4" D........... $43.49

Roman Ogee Bits

Decorative edging for cabinets and furniture Quadra-Cut™ Design 1/ " Shank 2 828861 5/32" R..................... $42.49 828862 1/4" R...................... $43.99

Straight Bits

These Double Flute bits are ideal for general stock removal with a smooth finish.

Credit Card Orders: 800 225-1153

Double-Grind™ Shank 828805 1/16 D, 1/4" CL..........$14.99 828656 1/8" D, 3/8" CL..........$14.99 828657 3/16" D, 1/2" CL.........$15.99 828659 1/4" D, 1" CL............$16.99 828660 7/32" D, 3/4" CL.........$15.99 828661 5/16" D, 1" CL...........$16.99 828662 3/8" D, 1" CL............ $17.49 828663 3/8" D, 11/4" CL........$18.99 Double-Grind™ 1/ " Shank 2 828668 1/4" D, 3/4" CL......... $20.49 835495 1/4" D, 7/8" CL......... $20.49 829432 5/16" D, 1" CL...........$18.49 828669 3/8" D, 11/4" CL........$19.49 834230 1/2" D, 1" CL............$18.99 828670 1/2" D, 11/4" CL........$18.99 828671 1/2" D, 11/2" CL....... $21.99 828672 1/2" D, 21/2" CL....... $31.99 834233 5/8" D, 1" CL........... $23.99 828673 23/32" D, 11/4"CL..... $23.49 835497 3/4" D, 11/4" CL....... $23.99 828674 3/4" D, 11/2" CL....... $25.99 828675 1" D, 11/4" CL......... $28.99 1/ " 4

V-Groove Bits

For multiple-sides projects, joinery, and easing edges. 1/ " Shank 4 828689 90°A, 5/16" CL . ..... $22.49 828691 90°A, 7/16" CL........ $26.99 1/ " Shank 2 828693 90°A, 1/2" CL......... $32.49

Chamfer Bits

Create a uniform chamfer on the edge of any workpiece. 1/ " Shank 4 828724 15°A, 1/2" CL.......... $29.99 828725 25°A, 1/2" CL......... $29.99 828727 45°A, 5/8" CL........ .$36.99 834269 30°A, 3/4" CL......... $46.99

Free Technical Advice: 800 535-4486

Top Bearing Flush Trim Bits

Ideal for lettering and other template work where the work piece is being grooved or routed out. 1/ " Shank 4 828738 1/2" D, 1" CL........... $23.99 828892 5/8" D, 9/16" CL........ $23.99 828739 5/8" D, 1" CL........... $26.99 828740 3/4" D, 1" CL............ $27.99 828893 1" D, 1" CL.............. $32.49

Top & Bottom Bearing Flush Trim Bits

Double bearing design allows you to use best cutting direction for work piece. 1/ " Shank 4 833361 1/4" D, 11/4" CL....... $34.99 1/ " 2

Shank 835152 3/4" D, 15/8" CL....... $46.99

Quadra-Cut™ Raised Panel Bits

Ideal for creating raised panels, decorative tops, & molding. Patented design produces a full 11/2" wide reveal. Bits with back-cutter (b/c) include shims to allow adjustment of tongue thickness from 7/32" to 1/4". 1/ " Shank 2 828933 bevel profile.............$79.99 833266 cove profile............. $94.99 828801 ogee profile............. $94.99 828802 bevel profile w/b-c .$99.99 828803 cove profile w/b-c... $99.99

www.woodcraft.com


Router Bits

Quadra-Cut™ Table Edge & Handrail Bits

A

A

Ideal for sturdy, attractive handrails for staircases. 1/ " Shank 2 828787 125/32" R................. $84.99 831124 13/32" R................... $83.99 828930 3/8" R.......................$76.49

B

B

Rabbeting Bits

This router bit can also be used as flush cutting trim bit. Includes hex wrench and bearings for 1/8", 1/4", 5/16", 3/8", 7/16" and 1/2" wide rabbets. 828705 1/2" CL, 1/2" SH........ $57.49

These bits are ideal for enhancing the edges of occasional tables (any type of table, night stands, etc.) 1/ " Shank 2 837611 3/8" R...................... $64.49 828913 25/64" R................... $64.49

4-Piece Under-Size

Adjustable Tongue & Groove Set

For stock thickness of 1/2" to 11/4". Groove cutter adjusts for widths of 7/32" to 3/8". 1/ " Shank 2 825745 ................................$79.99 B

2

3

4

5

6

C

837229 (A) window stool.... $55.49 837233 (B) brick molding... $88.99

Quadra-Cut™ Classical Tabletop Bits

A

1

Ideal for 1/4", 3/8", 1/2" and 3/4" plywood. 1/4" Shank. Wooden case included. 814819 ............................... $64.99

A

B

C

D

Base Cap & Molding Bits

Create baseboard or traditional “mop” boards in any width from any wood. 837211 (A) style 163........... $61.99 837227 (B) style 166........... $67.99 837228 (C) baseboard bit . $46.99

Door Casing Molding Bits

Add elegant detail to doors, windows, built-ins and many other projects. 837223 (A) style #356.........$73.49 837206 (B) style #366........ $62.99 837224 (C) style #376......... $67.99 837225 (D) style #445........$73.49

Window & Brick Molding Bits Window stool bit forms the edge of a window stool. The brick molding router bit creates industry standard profile #180.

Reversible wainscoting bit works with stock from 1/2" to 5/8" thick. The beadboard tongue & groove system mills beadboard in a variety of thicknesses from 3/8" to 3/4". Use the 1/ " shank solid carbide beadboard 4 v-groove bit to complete the beadboard design. (A) reversible wainscoting bit 837230 ............................... $40.99 (B) beadboard Tongue & Groove bit 837231 ............................... $88.99 (C) beadboard v-groove bit 837232 ................................$19.49

Premier Solid Carbide Bits

Plywood Set

C

Wainscoting & Beadboard Molding Bits

Exclusive TiCo™ Hi-Density Solid Carbide bits outperform the market in both finish quality and bit life. 1/ " 4

Shank (Up Spiral) 828750 1/8" D, 1/2" CL........ $20.99 828778 3/16" D, 3/4" CL......... $21.99 836793 1/4" D, 1" CL............ $51.99 1/ " 2

Shank (Up Spiral) 828779 3/8" D, 11/4" CL....... $49.49 1/ " 4

Shank (Down Spiral) 828781 1/4" D, 1" CL........... $21.99

Freud’s Premier Adjustable Rail & Stile System

With Freud’s unique, patented system, you are able to build any style of cabinet door in a range of door thicknesses and sizes! Create extended tenons for extra door joint strength, adjust groove width for different panel thicknesses & choose from a variety of material thicknesses 5/8" to 11/4". 2-piece Rail & Stile sets. 1/2" Shank 150675 Rndover.................$119.99 150676 Ogee profile...........$119.99 150677 Bead profile...........$119.99 845352 Bevel profile..........$119.99

Add additional cutters to the bits above to create thicker doors with double profiles and glass panel doors. *Rail & Stile sets sold separately Optional Double-Sided Profile Cutters include two cutters and a spindle to use with your rail & stile bit set to produce Double-Sided (DS) doors in stock up to 11/4" thick with stub tenons or long tenons. 150678 Round DS cutters....$95.99 150679 Ogee DS cutters......$95.99 150680 Bead DS cutters......$95.99 150681 Bevel DS cutters.....$95.99

Optional Glass Panel Door Cutter includes one straight cutter to mount on your stile bit to produce glass panel doors. 150682 Glass Cutter.......................$37.99

Wide Crown Molding Bits

Mill your own 51/2" wide crown molding in your choice of wood and profile! You can mix and match upper and lower profiles to produce your favorite design. Use the bevel cutter to rout perfect 38° and 52° bevels on the stock to finish the job. 836883 upper profile 1........$73.49 836884 lower profile 2........$73.49 836885 upper profile 3........$73.49 836886 lower profile 4........$73.49 836887 upper profile 5........$73.49 836888 lower profile 6........$73.49 837331 set profile 1 & 2.. $129.99 836889 molding bevel bit . $69.99

2-Piece Entry & Interior Door Bit System

The entry & interior door router bit system allows any woodworker to build entry and interior doors with true mortise and tenon construction. Material range from 13/8" interior to 13/4" for exterior doors. Patented design allows you to mill tenons of virtually any length. 1/ " Shank 2 833845 ............................. $199.99

3-Piece Adjustable Cabinet Door Sets combine the new adjustable rail and stile bits with your choice of panel profile in medium (23/4" dia.) or large (31/2" dia.) QuadraCut™ raised panel cutter. The 150687, 150688, 150692 and 845683 include a raised panel w/ back-cutter. 1/ " Shank 2 3-Piece Sets 150684 lg. bevel panel, round rail........... $179.99 150685 lg. cove panel, round rail............ $179.99 150686 lg. ogee panel, round rail........... $179.99 150687 lg. bevel panel w/bc, rnd. rail.....$191.99 150688 lg. cove panel w/bc, round rail...$191.99 150689 lg. bevel panel, ogee rail............ $179.99 150690 lg. cove panel, ogee rail............. $179.99 150691 lg. ogee panel, ogee rail............. $179.99 150692 lg. cove panel w/bc, ogee rail.....$197.99 845683 lg. ogee panel w/bc, ogee rail.....$197.99 150693 med. ogee panel, ogee rail........ $179.99 5-piece set also includes reversible glue joint bit and door lip bit. 1/ " Shank 2 150683 med. ogee panel, round rail.......$263.99

Helping You Make Wood Work ®

35


Router Bits C

B

A

D

E A

G

Improved design allows you to make full size stile and rail frames on your router table for raised panels, plywood panels, even glass panel doors. The interlocking profile and the panel groove are both cut in one pass. Ball bearing guides control the cutting depth so the bit sets can also be used on rounded, arched or special shaped doors. Simply switch router bits to change from cutting stiles to cutting rails. No extra components are required for glass panel doors, simply change cutter configuration and make your cuts like just like panel door construction. Use clips or corner trim molding to hold the glass pane in

C

WHITESIDE Bowl & Tray Router Bits

F

WHITESIDE 2-Piece Stile And Rail Door Sets

B

place. For cabinet door construction with under-sized 1/ " plywood panels use the 7/ " (5.5mm) plywood 4 32 conversion kit with any of the six different profiles of 2-piece sets. Ideal for stock from 5/8" to 7/8" thick. All bits have 1/2" shanks. 150803 (A) round-over stile & rail set.......$99.99 150804 (B) ogee stile & rail set.................$99.99 150805 (C) bead stile & rail set.................$99.99 820246 (D) straight stile & rail set............$99.99 814981 (E) traditional stile & rail set........$99.99 813830 (F) classical profile st. & rail set .$99.99 818469 (G) 7/32" plywood conversion kit . $44.99

Each bit has a bearing (150511 has two bearings) mounted on the shank to follow a template so you can make divided trays or recess the outline of your favorite grilled foods on a grilling plank. The 1/4" radius formed at the bottom of these bits provides the perfect transition from vertical to horizontal surfaces for serving and cleaning. 150511 (A) 1/4"R x 3/4"D x 1/2"SH...............$32.99 24D85 (B) 1/4"R x 3/4"D x 1/4"SH...............$29.99 825834 (C) 1/4"R x 11/4"D x 1/2"SH.............$35.99

WHITESIDE Biscuit Joining Bits

WHITESIDE Spiral Flush Trim Bits

These bits can be used for any flush trim situation and are an excellent choice for pattern or template work. Great for use with plywood, melamine or other laminated surfaces where chip-out is a concern. Use downcut for handheld router operations or choose the upcut for router table applications. 127465 1/4" D, 1" CL, 1/4" SH upcut..........$39.99 127466 1/4" D, 1" CL, 1/4" SH downcut......$39.99 127467 1/2" D, 11/4" CL, 1/2" SH upcut......$69.99 127468 1/2" D, 11/4" CL, 1/2" SH downcut.$69.99

WHITESIDE Over-Under Flush Trim Router Bits

Features a 5/32" cutter, wrench and bearing to cut slots for #20 Biscuits. Add bearing A for proper cutting depth of #10 biscuits, or bearing B for proper cutting depth of #0 biscuits. The biscuit bit set is your best value, it includes cutter, wrench and all three bearings. 24D71 biscuit bit, 1/4" SH........................... $19.99 24D72 biscuit bit, 1/2" SH...........................$21.99 24Z70 bearing A (#10)................................. $8.99 24Z71 bearing B (#0)................................... $9.99 24D70 biscuit bit set, 1/4" SH.....................$34.99 24D75 biscuit bit set, 1/2" SH.....................$32.50

Upcut Spiral Cutters Provide a smooth cut in all plunge routing operations. Spiral design pulls waste from the cut, leaves a flat bottomed mortise, and permits accurate cuts without chatter in any wood. Machined from solid HSS or carbide, these production quality bits will provide exceptional results for serious woodworkers. Cutting Dia.

Overall Cutting Length Length

Shank

Which flush trim bit do you use more often: bearing on top or bearing on bottom? What if you didn’t have to choose? Introducing, the new “Over-Under” flush trim router bits from Whiteside. You can easily position the bit height to allow the bearing to guide along the top or bottom of a workpiece. 147970 1/2"D, 1/4"SH.....................$24.99 149528 7/8"D, 1/2"SH.....................$34.99

Onsrud HSS Bits 12W52 1/8".......... 27/8"...... 3/8"....... 1/4"..... $11.99 128718 1/4"............ 3"......... 1"........ 1/4"......$19.99 03K42 1/4"..........31/4"...... 3/4"....... 1/2"......$20.99 12W53 5/16"........31/4"...... 3/4"....... 1/2"......$19.99 03K43 3/8"..........33/4"..... 11/4"...... 1/2"......$24.99 03K52 1/2"..........31/2"..... 11/2"...... 1/2"......$26.99 03K53 3/4"..........31/4"..... 11/4"...... 1/2"..... $44.99

WHITESIDE Pattern Cutting Bits

Whiteside Solid Carbide Bits 03K32 1/8"............ 2"........ 1/2"....... 1/4"......$19.99 03K33 1/4"..........21/2"....... 1"........ 1/4"......$19.99 08K61 3/8"............ 3"....... 11/4"...... 1/2"..... $51.99 03K35 1/2"............ 3"....... 11/2"...... 1/2"..... $52.99

Are the tools to use when working with template patterns. Now you can put your pattern on top of the wood and see your cut. The special bearing and stop collar assembly installed above the cutters allows you to move smoothly around the pattern. Or use it with a router table when the pattern is on the bottom of the wood you’re shaping. Carbide tipped, with two flutes, same diameter cutter and bearing.

Diameter Cutting Length Shank

24A61 1/2".................. 1".............. 1/4"..........$24.99 24A62 5/8".................. 1".............. 1/4"..........$29.99 24A63 11/8".............. 11/2"............ 1/2"..........$44.99

36

Antique Beading Bits

These bits produce a single bead on flat work, or a full bead (with two passes) as seen on the corner of a table leg. 24J05 5/16" BD, 1/4" SH............$39.99 814384 1/4" BD , 1/2" SH.............$33.99 24J15 5/16" BD, 1/2" SH............$39.99 813220 3/8" BD , 1/2" SH............$38.99 812396 1/2" BD , 1/2" SH.............$40.99

Credit Card Orders: 800 225-1153

WHITESIDE 3-Wing Slotting Cutters

Are superior to straight router bits for slotting the edges of boards. Carbide tips cut spline joints in solid wood, plywood, and particle board. A kerf 1/2" deep is cut quickly and cleanly. Cutters require arbor listed below to operate. 24D61 1/16" cutter only................................$17.99 24D62 5/64" cutter only............................... $19.99 24D63 3/32" cutter only............................... $19.99 24D64 1/8" cutter only................................ $19.99 24D65 5/32" cutter only*............................. $19.99 24D66 3/16" cutter only............................... $19.99 24D67 1/4" cutter only................................ $19.99 24D68 1/4" shank arbor w/bearing............. $9.99 24D69 1/2" shank arbor w/bearing............. $9.99 *Proper Size for cutting plate joiner biscuit slots.

Free Technical Advice: 800 535-4486

www.woodcraft.com


Router Bits

Buy Any 3

Whiteside Router Bits On These 2 Pages And

Deduct 10% Off Their Cost!

Straight

Cove

V-Groove

Dovetail

WHITESIDE Carbide Tipped Router Bits

Whiteside Machine Company has been making top quality router bits for over 30 years. Using the latest technology, up-to-date machinery, and expert craftsmen, they make a bit that features thick, high grade carbide, accurately ground to produce the smoothest finish cuts on your work. Each bit is inspected after every manufacturing step to ensure satisfaction and consistent quality. USA. Bearings may be imported. All bits are carbide tipped unless noted. D=Diam.; CL=Cutting Length; R=Radius; SH=Shank Diameter; SC=Solid Carbide; Straight Bits, 1/4" shank, two flutes. 24A01 SC 1/8" D x 3/8" CL........................... $14.99 24A04 1/4" D x 3/4" CL................................. $14.99 24A07 5/16" D x 1" CL.................................. $14.99 24A08 3/8" D x 1" CL................................... $16.50 24A10 1/2" D x 1" CL................................... $17.99 24A15 5/8" D x 3/4" CL..................................$17.99 24A14 3/4" D x 3/4" CL.................................$18.99 Straight Bits, 1/2" shank, two flutes. 24A31 1/4" D x 3/4" CL..................................$17.99 24A33 3/8" D x 1" CL................................... $16.99 24A35 1/2" D x 1" CL................................... $16.99 24A36 1/2" D x 11/2" CL...............................$18.99 24A38 5/8" D x 1" CL...................................$18.99 24A39 3/4" D x 1" CL...................................$18.99 24A43 1" D x 11/4" CL.................................$23.99 Cove Bits. For decorative edging with an inverted radius. Two flutes with bearing. 24C92 1/4" R, 1/4" SH..................................$26.99 24C93 3/8" R, 1/4" SH.................................. $31.99 24C94 1/2" R, 1/4" SH..................................$32.99 24D11 1/4" R, 1/2" SH.................................. $27.99 24D12 3/8" R, 1/2" SH..................................$29.99 24D13 1/2" R, 1/2" SH..................................$35.99 V-Groove Bits cut shallow and deep grooves for signs or furniture decorations. Two flutes. With 90° or 60° V-cut angle. 24B70 90°........ 3/8" D x 3/8" CL, 1/4" SH....$18.99 24B71 90° . ......1/2" D x 3/8" CL, 1/4" SH..... $21.99 24B81 60°.........1/2" D x 3/4" CL, 1/4" SH.....$24.99 Dovetail Bits. Use with dovetail templates. 818071 1/2" x 10°, 1/2" SH...........................$23.99 24D41 1/2" x 14°, 1/4" SH.......................... $21.99 24D42 1/2" x 14°, 1/2" SH...........................$24.99 24D43 3/4" x 14°, 1/2" SH...........................$23.99 24D44 1/4" x 7.5°, 1/4" SH (SC).................. $21.99 24D45 3/8" x 14°, 1/4" SH.......................... $21.99

Round-Over

Chamfer

Roman Ogee

Round-Over Bits. For smooth, uniformly rounded edges. Lowering the depth setting will produce a rounded corner with a decorative fillet. Two flutes with bearing. 24B91 1/16" R, 1/4" SH.................................$23.99 24B92 1/8" R, 1/4" SH..................................$26.99 24B93 3/16" R, 1/4" SH.................................$26.99 24B94 1/4" R, 1/4" SH..................................$26.99 24B95 5/16" R, 1/4" SH.................................$26.99 24B96 3/8" R, 1/4" SH..................................$26.99 24B97 1/2" R, 1/4" SH..................................$32.99 146203 1/8" R, 1/2" SH...................................$22.99 24C22 1/4" R, 1/2" SH...................................$23.99 24C24 3/8" R, 1/2" SH...................................$28.99 24C25 1/2" R, 1/2" SH................................... $31.99 24C27 3/4" R, 1/2" SH...................................$58.99 Chamfering Bits cut 45° bevels. 24L08 5/8" CL, 1/4" SH................................$26.99 24L18 5/8" CL, 1/2" SH................................$26.99 24D32 1" CL, 1/2" SH...................................$41.99 149227 7/16" CL, 1/4" SH...............................$24.99 Roman Ogee Bits create classic decorative moldings. Two flutes with bearing. 24E16 5/32" R x 9/16" CL, 1/4" SH.................$36.99 24E17 1/4" R x 11/16" CL, 1/4" SH................. $37.99 24E18 5/32" R x 9/16" CL, 1/2" SH.................$36.99 24E19 1/4" R x 11/16" CL, 1/2" SH................. $37.99 Cove

Ogee Straight

Panel Raising Bits. Two D) or three (33/8" D) flute, 1/2" shank, ball bearing pilots. 24F26 ogee, 21/2" D................................... $74.99 24F27 ogee, 33/8" D.................................$126.99 24F36 straight, 21/2" D, 25°......................$77.99 24F37 straight, 33/8" D, 16°....................$126.99 24F46 cove, 21/2" D................................... $74.99 24F47 cove, 33/8" D.................................$126.99 24Z91 replacement bearing........................ $4.99 (21/2"

Router Bit Shank Adapters

Universal split-type steel bushing allows 1/4" or 3/8" shank bits to fit routers with 1/2 " collets. 1 1/4 " overall length. 128665 1/4" to 1/2" ..................................... $14.99 111164 3/8" to 1/2"..................................... $15.99

WHITESIDE Rabbeting Sets

You’ll easily take on the challenges of drawer fronts, tenons, box lids, and rabbets with these versatile tools. Set includes one-piece bearings to make rabbets 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" deep. Plus, there’s a full-size bearing for the 1 3/8" large diameter bit for smooth flush trimming operations. The rabbeting bit has a maximum cut of 1/2", and every cut will be safe and smooth with the added face-shear on this uniquely designed bit. Set includes eight bearings, Allen wrench, rabbeting bit, and two storage “Trees” in a fitted box with cover. 143222 1/4" SH...........................................$62.99 143223 1/2" SH...........................................$62.99

WHITESIDE Shaker Stile And Rail/ Raised Panel Router Bit Sets

A

Make frames for Shaker and Mission style doors, as well as raised Shaker panels of different B reveal widths. The groove formed with the rail cutter allows for the perfect fit of standard 7/32" thick plywood panels to make Mission style doors a snap. The Shaker Raised Panel set consists of a panel raising bit at a 15 degree relief angle and 3 different bearings to produce reveal widths of 1/8", 3/16", and 1/4". Works with frame stock from 5/8" through 13/ " in thickness. The stile and rail set includes a 16 stile and a rail bit. 148047 (A) stile and rail bit set.................$99.99 148155 (B) raised panel bit set.................$59.99

WHITESIDE Multi Use Bits

Plywood Dado Bits. Plywood construction using dadoes has always been frustrating because hardwood plywood is typically made undersized. These odd sized straight bits are made specifically to eliminate that problem. They produce a precision dado Plywood Dado for a tight, no-slop fit. Pointed Round Over The 31/64" bit is for use 1 23 with /2" plywood and the /32" is for 3/4" plywood.

Diameter

Shank

Cut Length

24K07 31/64" ............ 1/4".............. 3/4".......... $19.99 24K17 31/64" ............ 1/2"...............1"........... $19.99 24K09 23/32" ............ 1/4".............. 3/4"..........$21.99 24K19 23/32" ............ 1/2"...............1"...........$19.99 150756 3-pc. dado bit set....................................... 7/ ", 31/ ", 23/ ", OD; 1/ " SH.......$49.99 32 64 32 2 845066 dado bit 7/32" OD x 3/4" CL 1. /2" SH.$24.99 Pointed Round-Over Bits are unbelievably versatile bits that can be used for fluting, beading, molding and even sign carving. Radius

127281 127282 127283 127284

Diameter

3/ ".......... 16 1/ "........... 4 3/ "........... 8 3/ "........... 8

Shank

3/ "........... 1/ "............$20.99 8 4 1/ "........... 1/ "............$22.99 2 4 3/ "........... 1/ "............$28.50 4 4 3/ "............1/ "............$28.99 4 2

Helping You Make Wood Work ®

37


Router Bits

WoodRiver® 20-Piece Bit Sets

The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operation. A final 400 grit, wet grind on the K20 German carbide produces a clean, extremely sharp, and durable cutting edge. Precision Japanese bearings ensure smooth edge routing operations. Set includes: 1/4", 3/8" and 1/2" dia. straight; 1/2" 3° bevel trim; 1/2" dia. V-groove; 3/8" & 1/2" 14° dovetail; 1/4" & 3/8" radius cove; 1/4" slotting; 1/2" bevel/trim; 1/2" flush trim; 3/16", 1/4" & 3/8" radius round over; 3/8" x 1/ " CL rabbeting; 1/ " CL 45° chamfer; 1/ ", 1/ " round 2 2 4 2 nose; & 5/16" radius roman ogee bit. 1 143025 /4" shank 20-pc. set................ $169.99 143026 1/2" shank 20-pc. set................ $169.99

B A WHITESIDE Glue Joint Bits

C

These bits provide a quick and easy solution for drawer and box construction. these bits produce interlocking profiles for strong glued joints. 45° Lock Miter Joint Bits 24F92 (A) 1/2" - 11/4″"CL, 31/8″"D, 1/2"SH.$124.99 812508 (A) 1/2" - 3/4″"CL, 2″"D, 1/2"SH.......... $94.99 Locking Drawer Glue Joint Bits, single joint 814638 (B) 1/2"CL, 3/4″"D, 1/4"SH................ $34.00 814944 (B) 1/2"CL, 1"D, 1/2"SH.................. $36.00 24E02 1"D, 1/4"SH, double joint.............. $54.99 24E03 1"D, 1/2"SH, double joint.............. $54.99 Standard Glue Joint Bit, dual joint 24E01 (C) 11/2"D, 1/2"SH..........................$61.99

Solid Brass Router Inlay Set

Free Centering Tool Assures Perfect Alignment! Lets you make absolutely perfect fitting inlay repairs and decorations on your work. Install the precision machined bushing with collar and 1/8" dia. cutter in your router and follow the template to cut the design in your work. Remove the collar from the bushing and cut the positive inlay using the same template for a perfect-fitting inlay. Set includes solid carbide downcut spiral bit, quick-change bushing, template guide, and instructions. Fits Porter Cable, Black and Decker, and any router with a Porter Cable bushing adapter. 09I16 . ....................................................... $42.99 09I17 repl. 1/8" downcut spiral bit.............. $15.99

T-9 Rust Protectant

WoodRiver®® Ten-Piece Router Bit Sets

These bit sets represent great value compared to buying individual bits. Includes: 1/4", 3/8" and 1/2" diameter straight bits; 1/2" x 14° dovetail bit; 1/2" diameter Core Box; 1/2" diameter V-groove bit; 1/2" diameter flush trim bit; 1/4" radius cove bit; 1/4" radius roundover bit and 5/32" radius roman ogee bit. Made in China. 150704 1/4" shank 10-pc. router bit set...$83.99 150705 1/2" shank 10-pc. router bit set...$83.99

MILESCRAFT Long Reach Router Bit Set

23/8" overall length is ideal for sign making. Carbide-tipped for a durable long lasting router bit. 1/4", 3/ " and 1/ " core box bits with 1/ " 8 2 4 shank. Use 1/4" bit with 1.5" letter templates included with SignPro jig. Use 3/8" bit with 2.5" letter templates included with SignCrafter and SignPro jigs. Use 1/2" bit for “bold” 2.5" letters. 149551 . ...................................................... $21.99

Router Bit Bearing Kit

Never be without just the right bit in the middle of a project again! This kit allows you to vary the depth of your rabbeting bits, or convert regular bits into top-bearing pattern or lettering bits. Kit contains two 1/4" stop collars, two 1/2" stop collars, six short and six long bearing screws, two hex keys for the stop collars, two hex keys for the bearing screws, and one each of the following diameter bearings: 3/ " ID x 3/ ", 1/ ", 5/ ", 3/ ", 7/ ", 11/ " and 13/ " OD 16 8 2 8 4 8 8 8 1/ " ID x 1/ ", 5/ " and 3/ " OD, 1/ " ID x 3/ ", 11/ " and 4 2 8 4 2 4 8 11/4" OD. Includes bearing lube applicator and plastic storage case. 145725 . ...................................................... $51.99

Eliminator RC™ Quick Change Chuck

The Eliminator allows you to change router bits in 5-10 seconds with only one hand and a hex key wrench. Holds bits securely yet eliminates wrestling with wrenches, leaves one hand free to hold bit in the collet and lessens your chances of nicking or pinching fingers. Chuck accepts 1/2" shank bits directly into collet, use appropriate reducing sleeves for 1/4" shank bit. The DeWalt version fits models 616, 618 and 621. 146076 chuck for DeWalt..........................$64.99 128665 1/4" to 1/2" bit shank adapter....... $14.99 111164 3/8" to 1/2" bit shank adapter....... $15.99

38

Developed by Boeing Aviation for long term metal protection on aircraft. A solvent and paraffin wax formula, it penetrates into metal pores, displaces moisture, and dries to a thin film that will protect your woodworking equipment for months. Offers long term storage protection for up to one year. Since it contains no silicones or Teflon® and dries completely within a few minutes, it will not transfer to wood surfaces or interfere with subsequent finishing. 12 oz. non-fluorocarbon spray is ozone safe. 03Q56 . ....................................................... $17.99 Rust Free. New, improved, the best we’ve ever tested! Removes rust and corrosion from most metal surfaces. Spray on and wash off rust with soap and water. 8.45 oz. pump. 03Q57 . ...................................................... $11.99 Blade and Bit. Removes resin, gum, and pitch from saw blades, router bits, drill bits, planer knives, and tool tops. Fast, safe and easy to use, simply wet the surface with this biodegradable liquid, allow to penetrate for 3-5 minutes, then wipe off. 8.45 oz., pump spray. 128479 . ..................................................... $11.99 Total Tool Care Kit includes one each of the above. 128478 set of 3 Save Over $7! .............. $34.50

Anti-Fatigue Floor Mats

Our mats are engineered for proper leg and back support in the workshop, at home, or anywhere you stand for extended periods of time. Made from a durable, tough PVC material that creates a non-slip surface that is easy to clean. Protect your floors at the same time you shield your falling tools from damage. Mats are 3/8" thick and black in color. 144546 24" x 36".......................................$19.99 144547 24" x 60"...................................... $31.99 146033 2' x 5' bevel edge......................... $33.99

Credit Card Orders: 800 225-1153

Magnetic Tool Holder

Keeps shop tools organized and ready for use. Heavyduty bar magnet firmly holds tools. 12" or 24" long with two adjustable hanger brackets. Great for use above work benches, lathes, or on any shop wall. 17N31 24" holder......................................$17.99 143968 12" holder.................................... $11.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Shop Accessories C

B A

A B

Heavy Duty Casters

Put your entire shop on wheels! These casters features easy rolling, nonmarring, polyurethane tires that will not “flat spot” from remaining stationary. The swivel and the wheel ride on ball bearings. The double brake on styles (A) and (B) locks the wheel and swivel rotation with the touch of a toe. The 41/4" tall, 3" casters, are available in three versions: (A) D double-locking, swiveling with 1/2" mounting hole for bolting direct to machinery legs, (B) double-locking, swiveling with 4 hole mounting plate, and (C) non locking, non-swiveling with 4 hole mounting plate. The 4" (51/8" tall) and 5" (61/4" tall) casters have 4-hole mounting plates. (D) are locking style, 41/8" tall with a choice of 1/2" or 3/8" diameter, 11/2" long threaded stems. Load rating for each caster is 300 lbs. Styles may be mixed or matched for quantity pricing. For more info, visit woodcraft.com. Style Wheel

140639 141051 141052 141050 141053 140642 141054 148594 148595

Each

6+

A 3".................... $16.50 ......$14.85 B 3".................... $16.50 ......$14.85 C 3".................... $11.50.......$10.35 B 4".................... $18.50 ......$16.65 C 4".................... $12.50 ..... $11.25 B 5".................... $19.99 ...... $17.99 C 5".................... $12.99 ......$11.69 D 3/8" dia. stem ...... $16.99 ..... $15.29 D 1/2" dia. stem ...... $16.99 ..... $15.29

WoodRiver®

WAGNER Digital Pinless Moisture Meters

These meters use the latest in electromagnetic wave technology to provide fast, pin-free moisture content readings. Both meters read an area of 11/2" x 21/2" to a depth of 3/4". This reading automatically compensates for the species of wood you are measuring by the specific gravity you select right on the meter. The MMC 205 has a moisture content reading range of 5% to 20% displaying in whole numbers, with a specific gravity range of 0.30 - 0.70. The MMC 220 has an added “Press/Hold” feature to capture readings, higher moisture content range of 5% - 30% displaying in tenths of a percent, and an extended specific gravity selection of 0.20 - 1.00. Each meter includes a soft carrying case and a comprehensive reference library CD that will allow you to find species correction information, view the moisture content and wood video library and much, much more. 143611 (A) MMC 205............................. $280.00 143612 (B) MMC 220............................. $395.00

SONIN Digital Moisture Meter Professional quality at a very affordable price, Sonin’s new pinned meter measures moisture content from 5% to 40%. Great for inspectors, contractors and homeowners! Test hard or soft woods, concrete, plaster, carpet or wall surfaces prior to painting or wallpapering. Easy to read LCD display, simple pushbutton controls and a one year manufacturer’s warranty. Requires a 9 volt battery (not included). 150096 ....................... $49.99

Machine Casters

Heavy duty, plate mounted machine casters with a weight rating of 300 kg (660 lbs) each or 600 kg (1,320 lbs.) per 4 casters. More than just wheels for your machine, they also feature a foot which when lowered not only raises the machine off the caster but may also be used to level your machine. The feet also help reduce vibration while the machine is in use. Each set of four casters come with a wrench for lowering and adjusting the foot under load. 149511 set of four.......................................$99.99

Shop Scissors

Don’t settle for an inexpensive pair of scissors that dull quickly, reach for a pair designed to cut and keep on cutting. Our scissors are made in the USA from hardened 420 stainless steel, have comfortable ergonomic, “soft” grips and they’re sharp! Sharp enough to cut the Woodcraft Catalog in half with a nice clean cut. They’re great for cutting sandpaper; leather or cloth for upholstery; sheet cane and even veneer. Overall length 91/2". USA. 148708 ......................................................$19.99

A

B

C

DELMHORST Moisture Meters

Delmhorst has been the leading manufacturer of high quality pin-type moisture meters for over 50 years. The new “J” series meters offer the latest advancements in moisture meter technology along with Delmhorst dependability. All models are packaged in a sturdy plastic storage case, come with 2 extra pins, an instruction manual, and a wood moisture measuring information booklet. All units weigh 11/4 lbs, are 8" x 13/4" x11/2", use one 9 voltbattery (included) and have a 1 year manufacturer’s warranty. (A) Model J-Lite has micro-controller circuitry for increased reliability and accuracy, with 12 bright LEDs for precise readings from 6%-30% moisture content. 123200 ................................................... $148.00 (B) Model J-2000 features a micro-controller circuit for increased reliability and accuracy, has built in corrections for 47 individual wood species, will accept wood temperature corrections from 0 - 255°F., averages up to 100 accumulated readings, and has a moisture range of 6%-40%. 123201 ................................................... $301.00 (C) Model J-4 uses the familiar analog readout, has a built in calibration check, temperature stable circuitry, and measures moisture content from 6%-30%. 123199 ....................................................$244.75

4-IN-1 Multi Function Detector Measures moisture in wood from 8-22%; detects studs, beams and joists behind walls up to a depth of 3/4"; locates and traces live AC wires behind walls up to 2" deep plus checks receptacles and switches; and detects metal of all kinds behind walls up to 2" deep. Requires one 9 volt battery (not included). 148111 .........................$34.99

PINNACLE® Leather Shop Apron

GERSTNER INTERNATIONAL 10-Drawer Tool Chest

This classic American style chest is constructed entirely of Red Oak with tongue and groove joinery that insures strength and durability. The green feltlined interior provides cushioning, and the hardwood design provides protection from moisture. The front lid stows under the 10 drawers in the open position and covers the drawers when in the locked position. Polished chrome plated hardware. Hand rubbed stain with lacquer finish. 24" W x 16" T x 10" D. 147378 ................................................... $399.99

This heavy, full-grain leather shop apron provides great protection but is soft and pliable for your comfort. A full 21" x 27", the extra length helps protect your clothing from sawdust and stains, and keeps sawdust and shavings out of your pants pockets. There are two breast pockets, one sewn for pencils and the other large enough for your safety glasses, and two large lower pockets with full flaps to keep your stuff in and debris out. Fully adjustable shoulder straps crisscross and are sewn in the back to keep the weight on your shoulders instead of your neck. For durable, comfortable protection in your shop this apron is what you need. 149422 ......................................................$79.99

Helping You Make Wood Work ®

39


Shop Accessories

Lumber Rack Storage System

6-pc. set

WERA Professional Screwdrivers

Now you can upgrade your shop tool “basics” with these professional grade screwdrivers. German based Wera Tools has been leading the field with quality and innovation for over 70 years. Their revolutionary hardened steel Lasertip® etching actually grips the screw recess when engaged, reducing the chance of the tip slipping from the fastener. Ergonomically designed Kraftform® handles have hard and soft zones that provide optimal torque with less user fatigue. Note: The smaller Slotted, Square Drive and Micro Drivers do not feature Lasertip®®. *Denotes items included in set. 150457 slotted 3x80mm w/o laser tip...... $3.50 150458 *slotted 4x100mm......................... $5.99 150459 slotted 5.5x125mm........................$7.99 150460 *slotted 6.5x150mm...................... $9.99 150461 *phillips #1x80mm........................ $6.99 150462 *phillips #2x100mm . .................... $9.99 150463 phillips #2x200mm .................... $11.50 150464 phillips #3x150mm......................$14.50 150465 pozidriv #2x100mm . .................. $10.99 150466 pozidriv #3x150mm...................... $15.99 150467 *square #1x80mm w/o laser tip .. $6.99 150468 *square #2x100mm w/o laser tip.$9.99 150471 *plastic rack for screwdrivers........ $2.50

This high load capacity system can also be used to store lumber. Straps are available in 24" and 55" lengths, formed from 3/16" thick steel and coated with a rust protective coating. The 24" Strap has a mounting tab that nests under the 55" Strap for applications where the units are stack mounted. Straps have “keyed” adjustment holes, spaced 11/2" apart, to lock the Brackets into the Straps. The Brackets are also 3/16" thick coated steel, rolled to form an inverted “U” shape for strength. The 18" Bracket will support a 300 lb. load at the tip. The shorter Brackets will support even more weight because of their reduced distance from the wall. The only real limitation of this system is the wall to which it is attached. The Straps should be anchored to the wall with heavy lag type bolts or expansion studs in concrete. The Straps should also contact the floor or a spacer to transfer the weight of the rack from the wall to the floor. Straps should be placed no farther than 36" apart to properly support the weight of the lumber. For more info, visit woodcraft.com! 142673 24" strap........................................$12.99 142674 55" strap........................................$24.99 142675 10" bracket...................................... $7.99 142676 14" bracket...................................... $9.99 142677 18" bracket....................................$15.99 Lumber Rack Set. All the straps and brackets you need to efficiently store a variety of 8-foot lengths of lumber. Includes: three 24" and three 55" straps; three 10" brackets, six 14" brackets and six 18" brackets. Set does not include mounting bolts. 131189 complete set Save Over $65! .$224.99

Screwdriver Sets 150470 Wera screwdriver 6-pc. set* w/Rack...... Save Over $16.00!..........................$35.99 150469 Wera Micro Screwdriver Set........$29.99

E D C

Heavy-Duty Galvanized Shelving System

With their unique hanger brackets these shelves can be quickly and easily hung, even on difficult surfaces like concrete or B cement block walls. This heavy-duty, galvanizedfinish shelving system is suitable for your garage, workshop, or basement, and you can set an entire shelving system up in minutes. The double-slotted Standards offer multiple mounting options and lengths. Make an 8' by tying two four’s together with a connector bracket. Screw your standards directly to wall studs , or use one of the two optional hanging brackets. The Fast-Mount Bracket can be mounted with screws to the top plate of a wall or over wall studs. The Horizontal Hang Track allows you to place standards wherever you want by sliding them along the 40" track. The Hang Track can be mounted to the top plate of a finished wall, over stud walls, or to any wall with anchors. Fast Mount Hooks allow shelf standards to be hung from basement sill plates. Two types of shelf brackets are available: Double Brackets rated at 150 lbs. per bracket; SupBrackets rated at 300 lbs. per bracket. A ported Unless noted, all components are sold singly. 147670 6' shelf standard........................ $12.99 147671 4' shelf standard............................$8.50 147672 (A) 2' shelf standard...................... $5.79 147673 20" supported shelf bracket........ $7.99 147674 13" supported shelf bracket........$6.99 147675 (B) 10" supported shelf bracket... $5.79 147676 14" double shelf bracket............... $5.79 147677 (C) 10" double shelf bracket.........$4.99 147678 (D) horizontal hang track..............$5.99 147679 (E) fast-mount bracket..................$4.50 147680 connector bracket.........................$1.99 147681 mounting screws (14)....................$2.99 147875 fast-mount hook ...........................$4.50 Heavy-Duty Shelving Kit includes three 6' shelf standards, three 2' shelf standards, three 20" supported brackets, six 13" supported brackets, and six 10" supported brackets. Screws not included. 147682 Save Over $17!.......................... $139.99

LUMBER WIZARD Metal Detector TOOLClad™ Magnetic Tool Covers Protect your investment!

TOOLClad™ Magnetic Tool Covers virtually eliminate rust from the cast iron tables of your table saw, bandsaw and scroll saw by magnetically adhering to the table top to seal out moisture. The padded magnetic material protects against dings and dents while creating a usable work surface. 148346 table saw, 28" x 44".....................$54.99 148347 band saw, 20" x 20"..................... $19.99 148348 scroll saw, 16" x 24"..................... $15.99

Features both an audible tone and a switchable vibration alert for noisy environments. Finds steel, stainless steel, zinc, magnesium and aluminum. Locates large metal pieces up to 4" deep, a large screw at 3", a medium nail at 2", a paneling nail or staple at 1", through wood. Simply lay the wand on your wood, adjust the sensitivity and pass the wand over the wood in sweeping motions. Requires one 9 volt battery, not included. 142778 ......................................................$99.99

PINNACLE® Wood Rack

TOOLClad™ Magnetic Accessories

Magnetic Decimal Equivalent and Pilot Hole Charts made from the same material as the Tool Covers. Affordable, easy reference, always close at hand. 148349 decimal equivalent........................ $3.99 148350 pilot hole......................................... $2.99

40

LITTLE WIZARD Metal Detector

Alerts metal presence with both LED lights and audible tone. Requires one 9 -volt battery, not included. 142012 .....................................................$19.99

Credit Card Orders: 800 225-1153

This multi-purpose rack provides 6 levels of storage for lumber, pipe, molding and other long items for your shop, shed or garage. The rack is made from heavy-duty tubular steel and is powder-coated to resist corrosion. Perhaps best of all – you don’t have to put it together, it’s ready to mount right out of the box. Each of the horizontal supports are welded to the vertical frame with a slightly upward cant and capable of holding up to 110 lbs. per pair. Mounting hardware is not included. USA. 150160 ......................................................$79.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Shop Accessories A C A 3rd Hand And Little Hand Heavy Duty Support Systems

B

B

Electric Branding Iron

C

If you ever wished you had an extra hand... here it is. The 3rd Hand and Little Hand provide support, brace, or clamp whenever you need an extra hand. Use them to mount wall cabinets above a counter or bench. The 3rd Hand’s articulating foot will pivot to support crown molding and cornices at an angle and adjusts from 5' to 12'. The Little Hand extends from 15.7" to 24.4" and has 6" x 6" Universal feet top and bottom for maximum support of cabinets during installation. Each unit has a 150 lb. load capacity. As a base, the Universal BigFOOT accessory provides a large 6" x 6" non-slip surface to allow the 3rd Hand to free-stand. Attaching it to the top of the 3rd Hand results in a larger nonpivoting head for holding objects square against upper surfaces. 144852 (A) 3rd hand.............................$39.99 144853 (B) little hand........................... $32.50 145538 (C) universal bigfoot................... $5.99 829122 carry case for (4) 3rd hands... $37.99 148411 laser mount..............................$19.99

B

A NAIL JACK Tools

These are the first hand tools ever designed solely for the purpose of digging, gripping and extracting fasteners such as nails, staples or brads. Whether you need to dig big nails out or carefully remove headless brads from the front or the back of your material, the 11" Nail Jack™ and 81/2" Hunter™ brand nail pullers will do the job quickly, effectively and efficiently. 149981 (A) Nail Jack..................................$29.99 149982 (B) Nail Hunter..............................$24.99

BLAKLADER Kangaroo Vests

Non-Electric Branding Iron

are made of soft 8 oz. cotton twill for comfort and durability. Featuring “more pockets than a herd of kangaroos” so your tools and gear are always close at hand. The two breast pockets have safety straps and a cell phone pocket, the front waist utility pockets are divided into 5 separate compartments, and there are two large hip pockets. Triple-stitched seams and no bottom seam pockets protect against rip-outs, and the concealed zipper features can be expanded 3" for use over heavy clothing. Note: Euro sizes listed run approximately one size small. 149217 L.................................................... $51.99 149218 XL................................................. $51.99 149219 XXL............................................... $51.99 149220 XXXL............................................. $51.99

3/ " 16

High

Branding Irons

We offer a variety of styles to meet your workshop needs. Clear brands can be made in wood, leather, cork, or canvas. When ordering please neatly print on the order form the imprint you want. When counting characters, include periods and extra spaces. Capital letters only. Since each iron is custom made, we cannot accept cancellations or returns unless defective. Allow 6-8 weeks for delivery

Branding Iron Date Attachment allows you to date your projects. Kits may be used with non-electric branding iron (49E12) and come with numbers for the years 2001 through 2032. Complete with instructions, attachment heads and Electric Branding Irons all necessary screws. Feature ceramic-insulated, nickel-chrome heating elements which deliver up to 955°F heat. Positive 123038 non-electric.................................. $47.99 grip, heat-resistant handles keep hands cool. Rated 125 watts, 120 VAC with 2 wire cord set 4' 6" long. Solid brass heads are individually engraved with 3/16" high capital letters and numbers (except logo/signature model). Allow 6-8 weeks for delivery. (A) Electric Logo/Signature Branding Iron. Have D E your distinctive design engraved. Note: very small details cannot be reproduced. Send clear black and white camera ready artwork to fit a 1" high x 23/4" wide, 11/2" x 2", or 13/4" x 13/4" area. 49D13 ................................................... $234.99 (D) Branding Iron features 3/8" engraved letters or numbers on a brass head. Plated steel shaft and (B) “Handcrafted By ...” Branding Irons. Add your hardwood handle keeps your hand cool when heating name on the second line and proudly mark every- on open flame (propane torch, charcoal grill, fireplace, thing that leaves your shop! Available with up to 20 etc.). Available in 1 to 12 characters, one line only. characters on 2nd line. Print the name you want on 49A11 1-3 letters/numbers......................$29.99 the iron clearly on your order form or just tell the 49A14 4-6 letters/numbers.................... $34.99 operator when you call. 49D11 electric model...............................$89.99 49A17 7-9 letters/numbers......................$39.99 49E12 non-electric model.......................$69.99 49A20 10-12 letters/numbers.................$44.99 (C) Personalized Electric Branding Iron for two or (E) Electric Initial Branding 3Iron Kit features a solid three lines of your copy. Each line can have up to 20 brass head with up to three /16" capital numbers or characters for your name, address, special message letters. Includes storage case and three accessory tips for general purpose soldering and burning. or instructions. All capitals, letters, or numbers. 900°F tip, 110 volts. Extra heads with your choice 49D14 2 line branding iron.....................$99.99 of brand simply screw into iron. 129219 3 line branding iron...................$119.99 49A30 complete kit Save Over$30!.......$49.99 Storage Case for electric and non-electric branding 49A25 branding iron only.........................$42.99 irons. Plastic 121/2" x 41/2" x 13/4". 49H13 extra head only.............................. $37.99 15M22 ...................................................... $12.99

TREND™ Tool & Bit Cleaner

Extend the life of your tools with this industrial strength non-toxic, biodegradable, wood resin remover. Perfect for blades, bits, files, wrenches, etc and anything that comes into contact with wood. The cleaner has unique properties for breaking the molecular bond and lifting the dirt and debris from all surfaces as opposed to dissolving the material like other cleaners. 150899 18 fl.oz...............$11.50

Dead Blow Mallets

These mallets feature a non-marring C head which is shot filled to deliver a solid, no bounce strike. Perfect for B assembly and disassembly opera- A tions and available in three sizes. 15F16 (A) 10 oz.......................................... $11.99 15F17 (B) 14 oz...........................................$16.99 15F18 (C) 28 oz...........................................$20.99 15F20 Set of three..................... Save $9 $39.99

Helping You Make Wood Work ®

41


Shop Accessories B B A Catalog items with this logo can be laser engraved. Customize or personalize your tools with our new laser engraving service. Prices are per line engraved. We will choose the location of the engraving unless you specify your preference. Quantity pricing is for 5 or more duplicates of the same message. Since each tool is custom engraved, we cannot accept cancellations or returns. Per Line 5+Lines 149258 (A)................................ $1.99......... $1.79 149259 (B)................................ $1.99......... $1.79 149840 tools purchased from Woodcraft........... .................................... $1.99......... $1.79 149841 other tools.................$2.50.........$2.25

Custom Laser Engraving

Traditional Bench Holdfasts

Large Bench Holdfast. The long reach and large holding pad of this holdfast allow you to quickly clamp or release everything from small boards to large carving blocks. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working. Simply position the clamp in a 15/16" hole and give it a hard, solid hit with a mallet. To release, just hit the back side of the clamp. Heavy duty ductile iron head featuring a 71/2" throat, 7/8" round steel shank with an overall length of 161/4". Small Bench Holdfast. Similar to above but made from solid ductile iron with a 31/2" throat, an overall length of 81/4" and a 5/8" round shank. Each

2+

145479 (A) large holdfast $27.99..........$25.19 145480 (B) small holdfast $13.50........ $12.15

A

C

F

B

E D G Laser Engraved Shop Sign

Customize your business or shop with a one of a kind, laser engraved sign. Choose either cherry or oak, select block or script font type, engrave one or both sides, and add your choice of decorative embossment. Embossment choices include (C) hand plane, (D) hand saw, (E) claw hammer, (F) chisel/mallet, or (G) saw blade. Each sign may contain three lines of horizontal text (up to 18 characters per line) and up to two embossments per sign side. Signs are 3/4" x 6 "″ x 24". 149705 (A) oak, engraved one side.......... $79.99 149707 (B) cherry, engraved one side..... $79.99 149715 cherry, engraved two sides.......$149.99 149716 oak, engraved two sides...........$149.99 149704 oak laser sign board.................... $19.99 149706 cherry laser sign board................$22.99

Leg Up™

Getting sheet goods up onto your table saw can be a real pain in the back! With the Leg Up™ Panel-Lift you can perform this task quickly and safely since this tool uses leverage, not strength, to lift cumbersome sheet goods. The Leg Up™ mounts quickly and easily to the edge of your saw’s table or to the fence rail and you are ready to go. Simply place bottom of panel in the ‘hook’ and rotate or ‘flip’ the panel onto the table saw. Mounting hardware included. USA. 842599 ......................................................$49.99

Lines of Copy

Per Plate

5+ Each

Small Satin Brass Plates measure 1/2" x 3". 145873 1 line ......................ea. $3.99 . ..... $3.50 145874 2 lines ....................ea. $4.50 . ..... $4.00 Large Satin Brass Plates measure 1" x 21/2". 145875 1 line.......................ea. $4.99 . ..... $4.50 145876 2 lines ....................ea. $4.99 . ..... $4.50 145877 3 lines.....................ea. $4.99........ $4.50

42

Protecting your investment in fine tools has never been more important and corrosion, especially rust, can quickly ruin a tool. Zerust® VCI’s Emitters help make this struggle a little easier by emitting a chemical vapor that coats all metals preventing corrosion of any kind - your steel from rusting and your brass and bronze from tarnishing. Even if you live in an area with high humidity, you’re still protected because the VCI molecules are heavier than the moisture molecules on metal so they displace them, coating the metal and preventing corrosion. Designed for protection in enclosed spaces, these emitters have an estimated life span that is reduced by how often the protected area is opened. Each Emitter has a coverage area or application - be sure to follow the recommendations on coverage area. FDA approved. The VC2-1 coverage area is a radius of 2 feet from capsule placement for up to 1 year. Great for tool boxes, safe deposit boxes, small safes and drawers. 149662 (A) VC2-1......................................... $6.99 The VC6-2 coverage area is a radius of 6 feet from capsule placement for up to 2 years. Great for larger areas like cabinets and closets. 149661 (B) VC6-2.......................................$29.99 Zerust®® Drawer Liners serve the dual purposes of keeping shelves, drawers and tools from damaging each other while protecting the items stored upon them from corrosion. Estimated life span 5 years. Liners can be trimmed to fit. 149663 12" x 72".......................................... $8.99 149664 22.5" x 118".................................. $19.99

WoodRiver® Dual Power LED Shop Light

Engraved Satin Brass Nameplates

Nameplates are solid brass, with a soft satin finish. Lacquer coating keeps the brass shiny for years. Includes brass pins or screws. Clearly print your inscription (any message you want) on the order blank. Max. 20 characters per line, including letters, numbers, periods and spaces. Specify capital or lower case letters. Since each plate is custom engraved, we cannot accept cancellations or returns. Quantity pricing is for duplicates of the same message.

A ZERUST® Vapor Corrosion Inhibiting Emitters

Gorilla Gripper®

Moving plywood, drywall or any sheet goods has just become easier. Simply slip Gorilla Gripper® over the center of the panel and lift. The leverage created by the weight of the panel and the unique jaws of the Gorilla Gripper® make it easy for one person to carry a panel. No more strained muscles or blindly bumping into everything in our shop! 842598 ......................................................$49.99

Blade And Bit Cleaning Brush

Everyone knows keeping your bits and blades free of resin buildup means longer edge life and cleaner cuts. There are a number of chemical products designed to loosen the resins but nothing to really help clean the cutting edges...until now! Short white china bristles, stainless ferrules and wood handle combine to make a durable yet inexpensive brush designed to help you scrub off resin buildup. Each package contains 5 brushes. 149631 ..................................$4.99

Credit Card Orders: 800 225-1153

This 7 LED light can go anywhere in your shop and is excellent for providing task lighting. Great for scroll saws, band saws, drill presses, reading and just about anything else you can think of. Uses AAA batteries (not included) or it can be plugged into any standard 110V outlet. A very strong magnet permits application to any steel or iron surface or clamp it on any surface up to 21/2" in thickness. Perhaps the greatest feature about this light is the 10" gooseneck that can be bent in any direction and stays where it’s pointed! Comes with a 110V transformer and base. 149727 ......................................................$29.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Vises & Clamps

Magnetic Or Clip-On Base Work Light

Interchangeable magnetic and springclamp bases allow you to use this light almost anywhere! The 360° swivel head and jointed arm adjust to light any work area with up to 60 watts. Complete with 18foot cord, heavy-duty switch, vented metal reflector shield and “bird cage” bulb protector. Bulb not included. Shop Tip: We screwed metal, electrical junction box cover plates to walls and joists around the shop and garage to utilize the magnetic base on non-magnetic surfaces. 09L06 . ........................................................$30.99

Self-Squaring Frame Clamp

Tightens all four corner joints equally and simultaneously with just the turn of a central wing nut. Jaws leave joints visible for inspection, easily adjust to accommodate frames from 5" x 7" to 26" x 30". Aluminum with glue-resistant plastic jaws. 08A62 . ........................................................$30.99 08A62C extra corners (4)...............................$3.99

Spring Miter Clamp Set

The quickest and easiest way to clamp mitered corners! Great for moldings and trim. Simply choose the appropriate size spring clamp and use the spreader to open and position the clamp. Kit includes spreader, 8 each of 3/8"-5/8", 5/8"-1”, 3/4"-11/4", 11/2"-13/4", 2"-23/4", and 21/2"-31/2" spring clamps and a form-fitted case. 145691 ........................................................ $57.99

Corner Clamp

Fluorescent Magnifying Lamp

The cool, glare free fluorescent light and large optical quality lens make it easy to work on small projects without straining your eyes. A 22 watt fluorescent bulb encircles the large 43/4" magnifying lens so you can see the finest details, without the heat an incandescent bulb produces. The spring balanced arm allows up to 45" of reach. Can be clamped to any surface up to 21/4" thick. 140561 . .................................................... $69.99

Perfect for picture framing, this clamp has a 41/2" capacity with a 11/4" high clamping surface. Whether you're simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees. This is a rugged, precise clamp with a saw slot to allow you to make your final miter trim while firmly holding the stock in position. Durable cast iron construction with steel Acme threaded vise screws and two countersunk mounting holes for permanent installation on the bench. 145962 .......................................................$29.99

Picture Frame Miter Clamp

Easily clamps all styles of picture frames up to 48" x 48". Plated rods are fully threaded and thumb nuts make accurate adjustments of the corners quick and easy. Also clamps small boxes and furniture. 07S51 . ....................................................... $21.99 07S51C extra corners (4)..............................$3.99

Quick Action Toggle Clamps

Quick Clamping Action Install on jigs, tool Adjustable Pressure fixtures, or moveD Large clamps A, D & C shown in closed position able bases so they Small clamps A, B & C shown in open position can be quickly set and engaged to hold A your work. Three different styles, each complete C with adjustable rubber pressure tips. Mounting screws are not included. (A) Vertical Handle To g g l e C l a m p s C A apply vertical clampB ing pressure with handles that lock in a vertical/up position. Best used when positioned (C) Low Silhouette Toggle Clamps provide vertiaway from the operator; handle can be pulled up into cal clamping pressure with locked handles in a locking position, or pushed back to release. horizontal/down position. Useful where clear work Lbs. Holding LxH space is required. Capacity Closed Each 4+ Lbs. Holding LxH 144312 100..... 21/8" x 31/8".....$10.99....... $9.89 Capacity Closed Each 4+ 3 143934 200.......2 /4" x 4"...... $11.99..... $10.79 143938 200.......6" x 13/4"...... $11.99..... $10.79 144313 500.......43/4" x 6"....... $15.99..... $14.39 143933 500.... 61/2" x 13/4".....$16.50.....$14.85 143935 750......53/4" x 71/2"......$17.99.....$16.19 144314 750.....113/4" x 21/2".... $15.99..... $14.39 (B) T-Handle Vertical Toggle Clamps are constructed (D) Straight Line Toggle Clamps are for push clampexactly like the vertical toggle clamps but have a ing operations such as keeping stock tight against lower profile T handle for easier gripping both in fences for drilling or cutting. front of and behind the jig or fixture. 143936 300.... 63/4" x 31/4".... $12.99.... $11.69 143937 200.........3" x 3"......... $14.99.....$13.49

B

WOODPECKERS® Clamping Square & Wedge

A

These machined aluminum Clamping Squares are 6" x 6", 3/4" thick, and 1" wide. Mini Clamping Squares are 23/4" x 23/4", 3/4" thick, and 3/4" wide. The Clamping Wedge mates up perfectly with the Clamping Squares to create a fixture for forming miter joints. You can maintain positioning and alignment by attaching the Wedge to a toggle clamp with a threaded stud. Each side of the wedge is 33/4". All squares and wedges are anodized. USA. 147530 (A) clamping square (2)................ $34.99 147531 (B) clamping wedge (2).................$24.99 143936 straight-line toggle clamp............. $12.99 147850 mini clamping square (2)..............$24.99

Helping You Make Wood Work ®

43


Vises & Clamps JORGENSEN “Pony” Pipe Clamps

Pony clamps are made in the USA and designed to be used on standard 3/4" or 1/2" black pipe (not included) to offer the flexibility of creating any clamping length. Both sets incorporate standard Acme cut steel threaded screws for a securing hold and final tightening. The tail-stop features a multiple-discclutch for fast easy adjustments while holding work securely. Sets include one each head and tail units.

Each

3+

15I01

clamp set for 3/4" pipe . ...... . ..............$18.79..... $16.91 15F31 clamp set for 1/2" pipe......... . ..............$12.99...... $11.69 15I06 clamp pads (2 pair)............. . ................ $5.50........$4.95

Big Jaw Pipe Clamp Fixtures

Our Big Jaw Clamps are made of heavy-duty ductile cast iron, feature a big 7" reach and have multiple-disc clutch plates for ease of adjustment and quick release. Use when more then just pressure along an edge is needed, such as veneering or gluing up large turning blocks. Screw mounts to any 3/4" standard threaded pipe. Pipe not included. Each 4+ 145526 ............. $21.99..... $19.79

Heavy-Duty T-Bar Clamps

These imported clamps are best suited for heavy-duty work, but will work in practically any clamping application. Their cast-iron heads are tapered 11/2° for true parallel clamping action. The main screw and handle are made of a high grade steel and the T-bar section steel is rolled dead straight. Capacity

Each

4+

141092 30"..... $28.99 . ....$26.09 141091 42"......$30.99 . .... $27.89 141090 54"......$33.99 . ....$30.59

PINNACLE®® Cam Clamps

These versatile, maple clamps are widely used by furniture restorers, cabinetmakers, luthiers and hobbyists. Light in weight with a quick cam action that produces 330 lbs. of pressure when fully cocked. Bar is made of spring steel, all sizes have cork faces to prevent marring and staining. Made of lacquered maple. Throat Open Each Depth Capacity

123262 123263 6" 123264 81/2" 123265 41/2" 123266 41/2" 41/2"

3+

8" $17.99. $16.19 8" $17.99. $16.19 8" $18.99 . $17.09 16" $19.99 . $17.99 24" $24.99 .$22.49

Vise With Angle Adjustment

This handy drill press vise features precision ground dovetailed trunnions that ensure smooth operation and accurate adjustment to any angle from 0° to 90°. Solid cast-iron construction provides added stability. The base is designed to facilitate an endless combination of mounting options, perfect for those difficult drill press applications. Jaw opening measures 31/4". 143185 ...............................$44.99

Rapid Action Band Clamp

Secures Workpieces In Seconds! The ratchet action mechanism needs no tools for operation, tightening the clamping band easily and releasing it at the touch of a lever. The 1" wide nylon web band exerts a steady 1500 lbs. of pressure on your workpiece. Each

3+ 

08F61 15' clamp.....$9.99....$9.00 111210 25' clamp .$12.99 .$11.70

Professional Miter Vise

Our Professional Miter Vise is designed for picture framers, where accuracy and precision are critical. Clamps boards and molding up to 4" wide for nailing or gluing. Rotates 90° and locks at any position between 0° horizontal and 90° vertical. Features a saw slot at the apex of the 45° angle for final “in-position” trimming of a joint. Inside jaws and vise table are cast iron with steel vise screws and knurled aluminum cylinder handles. 03W55.................................... $59.99

Pinch Dogs Pull Joints Together

When driven into end grain along a joint, these simple steel “clamps” draw boards tightly together for gluing up panels, table or bench tops, and can be used again and again. Pack of 10. 140113 11/2"......................... $19.99 140114 2"............................. $29.99

JEVONS 3D Squares Corner Band Clamp

Picture frames, hexagon, circular and just about any other shape, can be securely held with this clamp. The 6' nylon strap is neatly contained in its own reel, and 4 variable angle pads allow virtually any shape to be clamped. Just fit the strap around your work, flip the strap locks and turn the clamp handle to apply pressure equally around your project. Extra corners are available for projects with more than four sides. 141115 ..................................$18.99 141211 extra corners (4)........ $5.99

These heavy aluminum jigs are machined square to within .002" along the entire 6" leg, and designed to easily clamp on to a project making it simple to square up corners. Six inch long sides give plenty of clamping room so that when square is reached, it is kept until gluing and fastening is complete. Use for squaring up carcases, bookcases, or as part of a jig on a tablesaw. They make great holders/braces for high auxiliary fences for cutting raised panels. Each leg has countersunk screw holes to facilitate easy jig assembly. Once you have them, you’ll discover more uses almost daily. Sold as a set of two. Each Set

2+ Sets 

144041 ...............$32.99..... $29.99

44

Credit Card Orders: 800 225-1153

Adjustable Alloy Bar Clamps

These bar clamps are made of high quality extruded aluminum for both light weight and strength. The head of the clamp is riveted for rigidity and the adjustable foot wraps fully around the bar for tight clamping action. Detents are spaced 5/8" apart for quick adjustments. The clamp sits upright and is well balanced for ease of use. These clamps have a large “wing” type knob for good clamping pressure without causing fatigue. Each 6+ 811661 24"......... $27.99 . .. $25.19 811662 36".........$29.99 . .. $26.99 811663 48".........$32.99 . .. $29.69

Free Technical Advice: 800 535-4486

WoodRiver® Universal Vise

The 31/2" wide by 21/8" high jaws have a 5" open capacity, in either a vertical or horizontal position. The faces are drilled to accept wood facings, there is a small anvil, and the vise rotates 360° on its base, locking tight as soon as an item is secured in the jaws. Bolt holes in the base legs make it easy to attach the vise to a bench top. 144592...................................$51.99

www.woodcraft.com


Vises & Clamps BESSEY Tradesman™ Bar Clamps

The original Bessey design is unmistakable with its patented non-slip locking mechanism. It has greater holding power than any “clutch- style” clamp. Other features include corrugated cast jaws; high quality galvanized profiled rail, coated oversized acme thread, and large ergonomic wood handle and glue resistant non-marring plastic caps. A Tradesman Medium Duty Clamps with 1" x 1/4" rail size and nominal clamping pressure of 600 lbs.

B

Capacity Throat Depth

Each

6+

141413 6"..........21/2"........... $12.99 .......$11.69 141414 12".........21/2"........... $14.99 .......$13.49 141415 18".........21/2"........... $15.99 .......$14.39 141416 24".........21/2"........... $18.49........$16.64 141417 30".........21/2"........... $20.49 ...... $18.44 141418 36".........21/2"........... $21.49 .......$19.34 Tradesman Heavy Duty Clamps with 1" x 5/16" rail size, and nominal clamping pressure of 800 lbs. Capacity Throat Depth

Each

6+

141419 8".............4"............... $23.49...... $21.14 141420 12"...........4"............... $29.49...... $26.54 141421 16"...........4"...............$33.49.......$30.14 Tradesman Extra Heavy Duty Clamp with 11/4" x 3/ " rail size and nominal clamping pressure of 8 1320 lbs. Capacity

Throat Depth

Each

6+

141422 12"......... 51/2"............$33.49.......$30.14 143782 repl pads small (4).....$7.50 143783 repl pads large (3)..... $6.50 Edge Clamps increase the versatility of sliding bar clamps. Each 6+ 141516 (A) single screw........$13.99.. .....$12.59 141517 (B) double screw.......$16.99...... $15.29 MaxFlex Series Bar Clamp. Omega bend dampens the impact of external vibrations while clamping. Sliding pin handle with 1100 lbs. nominal clamping force. Capacity Throat Depth

Each

2+

149980 12"............51 /2".........$56.99......... $51.29 Mighty Mini™. A general-purpose clamp that does the work of a 1", 2", or 3" C-Clamp, but nine times faster. Clamping pressure of 330 lbs. Capacity Throat Depth

Each

BESSEY F-Style Bar Clamps

have cast heads, coated steel bars, wooden handles and swivel pads. Bar size is 1/4" x 3/4".

Capacity Throat Depth

Each

6+

146980 6".......... 21/2".......... $10.50........... $9.45 146981 12"......... 21/2"..........$12.99......... $11.69 146982 18"......... 21/2".......... $14.50.........$13.05 146983 24"........ 21/2".......... $16.50.........$14.85 146984 30"........ 21/2"........... $17.50......... $15.75 Bar Clamp Set. 2 each 12", 24", and 30" clamps. 146973 set of 6 Save Over $15 ............. $74.99 Double Headed Bar Clamps. Fixed jaw with two clamping surfaces to distribute force over larger area. Capacity Throat Depth Each 6+ 838432 12"......... 31 /2"......... $13.99.........$12.59 149957 24"......... 31 /2"......... $15.99.........$14.39 Heavy Duty Bar Clamps. Similar to above but with a 31/2" deep throat and heavier bar (5/16" x 7/8").

Capacity Throat Depth

Each 

6+

146985 12".......... 31/2"......... $16.50..........$14.85 146986 18".......... 31/2"......... $19.50.......... $17.55 146987 24"......... 31/2"......... $25.50..........$22.95 Deep Throat Heavy Duty Bar Clamps. Same as Heavy Duty Bar Clamps but with a 5" deep throat. Capacity Throat Depth

Each

6+

842371 12"........... 5"............$26.50......... $23.85 842372 18"........... 5"............$30.99.......... $27.89 149956 24"........... 5"............$34.99..........$31.49

BESSEY H-Series Pipe Clamp Fixtures

The large, flat parallel clamping surface made of impact and break resistant polyamide comes with 3 replaceable pressure caps that are glue, paint and grease resistant. Internal frame ensures accurate 90° angles which are very sturdy even at maximum pressures. Large, comfortable 2-component composite handle with soft plastic insert for a more comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate workpiece from the rail. Removable end rail clip ensures clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader. Vario REVO clamps replace the fixed jaw with a wider sliding jaw that can now be place anywhere on the bar with a push of the release button. Use KP blocks to create an efficient rail and style clamping system. Accessory Tilting Jaws slide over the REVO clamp heads and pivot ±15° for securing non-parallel edges. TK6 Table clamps use the integral mounting holes in rail protection pieces and end rail clip to anchor the REVO in position for repetitive work. Additional clamp jaws with spindles and Vario sliding jaws are available to double or triple the clamping positions on your longer K-Body REVO clamps. Single

The unique foot design provides dualaxis stability, and the long legs raise your project off the work surface so tightening the clamp is easier. The large handle provides positive pressure while the “clutch” action grips the bar automatically.

BESSEY K-Body® REVO™ Fixed Jaw Parallel Clamps

Each

4+

147891 1/2" fixture...................$17.50........ $15.75 147892 3/4" fixture................. $18.50........$16.65 Threaded 3/4" Black Pipe for use with Bessey 3/4" H-Series Pipe Clamp. 124397 3/4", 30"..........................................$18.99 124398 3/4", 40"..........................................$24.99 124399 3/4", 50"..........................................$30.50

6+

Pair

12" REVO 149053.... $37.99 149516...... $75.98 24" REVO 149054... $38.99 149517.......$77.98 31" REVO 149055... $42.99 149518......$85.98 40" REVO 149056... $48.99 149519...... $97.98 50" REVO 149057.... $51.99 149520....$103.98 60" REVO 149058... $59.99 149521....$119.98 40" VARIO 149958... $58.49 149959....$116.98 60" VARIO 149960... $66.99 149961....$133.98 03W68 KP block set, 4-pcs....................$28.50 842045 tilting jaws, pair..........................$15.99 842283 TK6 table clamps, pair..................$7.50 842279 jaw protection pads, pair.............$8.50 842281 rail protection pieces, pair...........$5.50 842280 end rail clip, single.......................$5.50 149962 jaw clamp spindle......................$26.99 149963 sliding jaw end............................$16.99

130926 4"................ 2".............. $7.50 ........$6.75

BESSEY Vario Strap Clamp

With a 23' long x 1" wide, high-tensile strength polyester “no stretch” strap that winds up for safe and easy management, and four unique “vario-angles” that exert continuous pressure on the joints, this is more than just a strap clamp. Special winding gears at the head of the threaded spindle draw the strap evenly from both sides. Additional vario-angles are available in sets of 6. 127924 strap clamp...................................$40.99 127933 vario-angles (6).............................$15.99

BESSEY KliKlamp® Ratcheting Bar Clamps

Ratchet action controls clamping with an ergonomically shaped clamping arm made from fiberglassreinforced polyamide. Fixed and sliding arms made from magnesium are extremely light and strong. Fixed arm with V-grooves holds round, pointed or angular shaped work pieces firmly. Complete with plastic cap to protect workpiece. Each clamp has a throat depth of 3" and a clamping force of 260 pounds. 4+ 144360 4".............................. $24.99........$22.49 144361 8".............................. $25.99........$23.99 144362 12"........................... $26.99........$24.29

BESSEY LMU Series Light-Duty Bar Clamps

This new light-duty bar clamp has a U-shaped rail that enables step-over clamping for those hard to reach spaces. The sliding arm is made of die cast zinc which is light, stable and break resistant. The plastic pressure caps on the top and bottom sections protect the work piece surface. Throat depth is 2", with a clamping force of 330 pounds. 4+ 149525 4" .............................. $5.50.......... $4.95 149526 6" .............................. $6.50.......... $5.85 149527 8" .............................. $6.99.......... $6.29

Helping You Make Wood Work ®

45


Vises & Clamps

BESSEY® Malleable Cast C-Clamps

The BESSEY malleable C-Clamp is designed for general purpose and light duty applications. The frame is made of malleable iron with bright, rust resistant coating for 3" and smaller sizes and black powder-coating for 4" and larger sizes. Smoothly rolled threads of the spindle have a crimped swivel to adapt to various surfaces and steel sliding pin for use in tight spaces.

Capacity Throat Depth

839107 839109 839112 839114 839116 839117

Each

4+

11/2"...........11/2"........... $2.50......... $2.25 21/2"..........13/8"........... $3.99......... $3.59 3"...............13/4"........... $4.25......... $3.83 4"...............33/4"........... $6.99 ........ $6.29 6"...............31/2"........... $9.99........ $8.99 8"...............31/2"........... $14.99..... $13.49

BESSEY EZS One-Handed Quick-Action Bar Clamps

This extremely sturdy original BESSEY one-handed clamp EZS is perfect for all work that needs to be carried out with one hand – overhead tasks, or if the other hand is needed for aligning purposes. Sophisticated technology makes it possible for single-handed clamping and spreading of work pieces with up to 440 lb. clamping force. The upper section can be quickly converted from clamping to spreading without the need for tools or releasing screws. An ergonomically shaped 2-component plastic handle with pump lever is positioned behind the rail, enabling a powerful grip. Soft pressure caps provide material protection and secure clamping.

Capacity Throat Depth

845103 845104 845105 845106 845107

Each

A

B BORA Wide-Track Clamp-Edge Tool Guides

WoodRiver®® Clamp Guides

Combine a rigid guide rail with an internal clamp eliminating the need for c-clamps or hold-downs. Use any C of the clamp guides with your circular saw to cut sheet goods to a manageable size or guide your router for dadoes. Clamp guides are the perfect fence for your band saw, drill press or router table. Clamp guides are extruded aluminum rails that act as tool guides while housing clamping components and also include tape measure scales and integral T-Track slots that allow the use of the Universal Base or shop-made guides and jigs. Back-to-Back Clamp Guides have bottom jaws that attach to any workbench, tabletop or work surface while top jaws clamp the workpiece firmly. Low profile clamp pads reduce interference while sawing, routing or sanding. The Extra-Wide Clamp Guide has the widest rail extrusion for ultimate rigidity with additional T-Track and guide slots. The Clamp Guide Universal Base features a 111/2" x 63/4" plate, that slides precisely in the T-Track slot found on all of the clamp guides, is perfect for mounting your circular saw or router. 149190 (A) clamp guide, 24".....................$29.99 149191 (A) clamp guide, 36".....................$34.99 149192 (A) clamp guide, 50".....................$39.99 149193 (B) back-to-back guide, 36"..........$49.99 149194 (B) back-to-back guide, 50".........$59.99 149195 (C) extra-wide guide, 54"..............$59.99 149196 clamp guide universal base........$29.99

4+

6" ............ 31/8" ......... $20.50....... $18.45 12" .......... 31/8" ......... $22.50....... $20.25 18" .......... 31/8" ......... $25.50....... $22.95 24" . ........ 31/8" ......... $28.99....... $26.09 36" . ........ 31/8" ......... $33.99....... $30.59

More than just a wider version of the original Clamp-N-Cut edge guides. The improved clamp design complements the 33/8" wide rigid guide extrusion that includes 1/4" T-tracks on both sides of the top surface. These clamp guides also have a larger contour grip with integrated hang-hole for convenient storage. Same swivel head design as the previous model these guides can be skewed across surfaces at angles up to 221/2°. Sizes denote maximum clamping capacity. Saw Guide minimizes binding by keeping your saw accurately aligned with the cut. Auxiliary clamps turn your Wide-Track into a simple back-to-back clamp. 149973 42" wide-track clamp-edge..........$59.99 151244 50" wide-track clamp-edge..........$69.99 149974 66" wide-track clamp-edge..........$84.99 151245 saw guide for wide--track.............$34.99 151246 aux. clamps for wide-track............$17.99

PINNACLE®® Wooden Handscrews

These are the classic cabinetmaker¹s bench clamps for gluing and assembly. Durable, oiled, hard maple jaws will not mar the work and are less likely to slip than steel jaws. They have a deep throat and can be used to apply a broad area of evenly distributed pressure or concentrated at one point of contact. Drawn carbon steel screws pivot to allow the jaws to grip nonparallel surfaces. Made in USA.

BORA Pistol Grip Bar Clamps

Pistol grip style quick acting clamp features ergonomically designed handles that fit comfortably in your hand. High strength, light weight composite body with soft grip clamping pads feature a V-groove for round objects. 2" throat depth with 330 lbs. clamping force. Clamp can be reversed for spreading.

Each

Jaw Throat Open Length Depth Capacity

148587 148588 148589 148590 148591

.4" . ........2" ........21/4"..................... $14.99 .6" . ........3" ..........3"........................$17.99 .8" . ........4" ..........5".......................$20.99 .10" .........5" ..........7".......................$23.99 .12" .........6" ....... 91/4".....................$26.99

4+

149900 6"................................ $13.99.......$11.99 149901 12" (shown)................ $15.99.......$13.99

JORGENSON ISD3 Clamps

ISD3 clamps feature a unique expandable design which allows two clamps to be combined into one single clamp. This allows the user to add an additional 6" of clamping length to their bar clamps when combined by using a quick release knob for easy changes to the expanded or reversible position. These clamps also offer a 76% increase in clamping pressure over the 500QC QuickGrip series clamps. The ISD3 still feature the “Dual Durometer” handles and are truly a “Woodworking Capable” clamp. 152178 6".....................................................$18.99 152179 12" (shown).....................................$20.99 152180 18"...................................................$23.99 152181 24"................................................... $27.99 152182 36"................................................... $31.99

46

WOODPECKERS®® Clamp Racks

The Light-Duty Clamp Rack with a capacity of up to 23 clamps, has 1/4" wide slots to fit most F-style clamps. The Heavy-Duty Clamp Rack has welded construction, will hold up to 18 clamps, the 1/ " wide slots will fit most bar and parallel style 2 clamps. Pre-drilled mounting holes are on 16" centers. These racks will not fit pipe clamps. Clamps not included. U.S.A. Each 2+ 148548 light-duty rack, 24"....... $19.99.....$17.99 148549 heavy-duty rack, 36"....$29.99....$26.99

Credit Card Orders: 800 225-1153

WoodRiver® Pattern Maker’s Or Gunstock Carving Vise

The body of this heavy cast-iron vise swivels 360° so you can always position your work where you need it. The 47/8" wide jaws open to 6", and both jaws swivel so you can clamp virtually any shape. Perfect for holding table legs for shaping or carving. Secured to any bench or table top up to 41/2" thick by a heavy threaded rod (which requires a 3/4" hole) and large winged nut, so it can be quickly set up and removed as needed. 142768 .....................................................$119.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Vises & Clamps

JORGENSEN Rapid-Acting Bench Vises

Turn the hardwood handle a half-turn counter-clockwise and the pivoting nut disengages, allowing you to open or close the jaws to the desired opening in a flash. The machined jaws are toed-in to create the best possible holding power, and included countersunk, tapped holes for custom wood facings if desired. Includes a solid steel front dog to serve as a bench stop for large-project clamping. Appearance of the smaller vise slightly different from larger vise shown in the photo. USA. Face

Opening

16T51 4" x 7"........ 9".................................$134.99 16T52 4" x 10".... 12"................................$154.99

GRÖZ 7" Bench Vise Hardware

The 7" Gröz Front Vise Hardware manufactured from close-grained cast iron features a 3/4" diameter steel main screw with buttress threads and fitted solid steel guide rods that reduce wear and tear, giving the vice hardware a smooth and true parallel action. Main casting and 7" wide face casting are pre-drilled to add jaws and to mount to your workbench. The jaw opens to 83/4" without added components. Includes a finished wooden handle. 148446 ..................................................... $56.99

WILTON Woodworker’s Vise

Features include a metal housing which fully encloses the screw, preventing sawdust and dirt from “gumming” the threads. Front jaw pivots 12 degrees to allow clamping of irregularly shaped objects and the entire front jaw can be “lifted” up and locked in place to serve as a full-length dog. Jaw width 4" x 7", max. opening 10", 29 lbs. Complete with mounting instructions. Vise shown with optional Magnetic Maple Jaws available below. 126504 Wilton vise...................................$179.99 126505 magnetic maple jaw inserts.........$29.99

A

B

D

GRÖZ Rapid Action Woodworking Vises

Small End Vise Slide with 1" dia. x 14" L screw and 4" W x 15" L vise. 144806 (A).................................................. $47.99

These vises feature a unique rapid-action mechanism to tighten the vise simply turn the handle in the usual way but as soon as the handle is turned in the opposite direction, the screw is disengaged and the front jaw slides freely. Vise jaws are equipped with a “toe-in” feature so that when fully closed the jaws meet only at the top for even clamping on the whole depth of the work piece. The steel main screw has Buttress threads for smooth and responsive adjustment. 7" vise has a 7" wide jaw and 8" opening; 9" vise has 9" wide jaw and 13" opening. 148445 7" vise............................................$84.99 148437 9" vise.........................................$115.49

Small Front Vise with 1" dia. x 10" L screw, 3/4" dia. guide rods and 9" W x 13" L vise. 144804 (B)................................................. $51.99 17E46 handle for 144804 & 144806....... $6.50

GRÖZ Portable Hobbyist Vise

WoodRiver® Economy Bench Vise Hardware

Improve your current bench by adding a front vise or use this economical hardware to build a new bench from scratch. We’re sure you’ll find that the rugged castings and precision parts make these economically priced workbench vises a fantastic value. Handle not included.

Large Front Vise with 13/16" dia. x 151/2" L screw, 3/ " dia. guide rods and 10 1/ " W x 19 1/ " L vise. 4 4 4 144805 (C).................................................. $76.99 17E52 handle for 144805 & 144807....... $6.99 Large End Vise Slide with 11/4" dia. x 171/2" L screw and 4" W x 195/8" L vise. 144807 (D).................................................. $79.99

Quick Release Front Vise

Features a machined pivoting nut that engages or releases with a turn of the 1" diameter main screw. 20mm diameter guide rods. Screw and body length 19", width 101/2". Made in Germany. Handle and mounting screws not included. 17A11 . .......................$214.99 17E52 handle.................. $6.99 Economy Quick Release Front Vise. Virtually identical to the hardware above, but made in China. 145444 . ..........................$86.99

Body and jaws are quality castings fitted with two steel slide bars, an acme threaded main screw, and steel sliding handle. Portable and features an integral clamp for tops up to 21/4" thick. Pre-drilled holes to permanently mount to a bench. Jaws are 6" x 2", open to 5" and are pre-drilled for wooden faces. 141673 ......................................................$32.99

German Bench Screw

Favored because of its strength and versatility, these are adaptable for many uses: end vises, cider presses, and bookbinder’s presses. 32mm (1 1/4") diameter screw, length 480 mm (183/4"), screw length 17". Collar and nut are made of malleable cast iron. Made in Germany. Handle and mounting screws not included. 01H41 . ......................................$61.99 17E52 handle............................... $6.99

WoodRiver® Pattern Maker’s Vise

Because of their versatility, vises of this type were the center of a pattern maker’s shop for more than a hundred years. Not only can you swing a clamped workpiece up to horizontal, you can rotate it 360° in the vertical position. Rotating gives you access to three sides of a clamped piece, even upside down! The main jaws pivot up to 5° for clamping tapered work, and the furnished auxiliary jaw will pivot up to 30°. Two dogs in each jaw allow clamping of round or irregular shapes. Jaws are 133/4" wide x 5" deep, maximum opening 12". Weight 55 lbs. Complete with wooden handle, mounting instructions and hardware.

GRÖZ Quick Release Vises

Close-grained grey cast iron means accurately machined housings for smooth sliding and true parallel action, free of side or cross movement. The steel main screw has buttress threads for smooth, accurate and responsive adjustment and the body and sliding jaw have provisions for attaching wooden liners. The adjustable front dog of special high-strength plastic protects your tools. 7" vise installs 21/4" below the bench surface, 9" and 101/2" vise installs 27/8" below the bench surface. 144844 7" width, 8" opening..................$109.99 144845 9" width, 14" opening................$146.99 147941 101/2" width, 15" opening..........$153.99

C

Cam Action On Front Jaw

Auxiliary Swivel Jaw

Tilts Up 90°

Rotates 360°

Extension Dogs Hold Rings and Awkward Shapes

Helping You Make Wood Work ®

47


Workbenches

PROFESSIONAL QUALITY TOOLS

PINNACLE® Cabinetmaker Workbenches

Based on a Carlyle Lynch design, this modern classic is a testament to Woodcraft’s ongoing efforts to offer our customers the finest selection of wood working tools and accessories. Mr. Lynch designed this bench decades ago while living in the Shenandoah Valley in Virginia. Being a first rate craftsman and a skilled draftsman, he would travel to numerous museums in the south requesting access to study and create dimensional drawings of their 18th and 19th century furniture collections. These drawings would then provide a basis so that future woodworkers would be inspired, to replicate and to improve on their own skills. The particular plan was bought by Woodcraft and sold for many, many years until recently when we were inspired to have the bench built and offer it to our customers. The Pinnacle® workbench is made by skilled craftsman right here in the USA, constructed from 100% North American Beech. Both front and rear vises are heavy cast aluminum with steel inserts to ensure smooth operation. A wide stable base, connected by two runners, provides support for a laminated

Beech top. This bench is fully equipped with a front vise, tail vise, tool tray and numerous bench dog fixtures holes and two brass bench dogs. The bench is topped off with a Tung Oil finish. USA. Small Bench Large Bench Height: 361/2" 371/2" Length of Worktop: 64" 84" Width of Worktop: 221/4" 251/4" Overall Length: 72" 94" Overall Width: 29" 33" Top Thickness; Center: 3" 4" Top Thickness; Skirt: 3" 4" Vise Opening: Frnt. 10"/Tail 7" Frnt. 10"/Tail 12" Clamping Max. Distance: 72" 82" Bench Weight: 175lbs. 250lbs. Shipping Weight: 200lbs. 275lbs. 150811 72" L X 29" W X 361/2" H........ $1,499.99* *Standard shipping rates plus $55 for excess weight. 151074 94" L X 33" W X 371/2" H....... $1,799.99** **Standard shipping rates plus $75 for excess weight.

KREG Klamping Table

4-direction pressure

Parts included with each clamp.

WoodRiver® 4-Way Pressure Clamps

Eliminates Buckling When Gluing Large Panels! WoodRiver 4-Way Pressure Clamps apply equal pressure from all four directions (top, bottom, and both sides). Ideal for gluing table tops, shelving, veneer, and laminates. Attach clamps to any length 2 x 2's (a 2 x 4 ripped in half) with screws provided, set jig and turn handle to tighten (on large pieces, position every 12"-18" for maximum clamping efficiency). Clamp has plastic pressure pads and two 191/2" tail bars of tough plastic with 12 notches to handle a variety of stock widths. It can be used on boards up to 6" thick. Comes with complete instructions, 2 x 4’s not included. Replacement “long” and “short” notched plastic clamping bars sold in pairs. Each

125392 125398 125397

48

3+

................................ $26.99 .......$24.29 long bar (2)................$4.99.......... $4.49 short bar (2)...............$2.99.......... $2.70

Combines the versatility of adjustable locking pliers with the convenience of an extruded aluminum Klamp Trak that is securely bolted to a 1" thick support panel. Applies an incredible amount of pressure to the joint line. Perfect not only for use as a pocket hole assembly station, but also as a general hold-down while drilling, routing, sanding, and more. Each Klamp Table Top includes two Klamp Table Klamps with 3" throat depth which rotate 360° on the Klamp Traks and can be moved along the extrusions that line the left and bottom sides of the table. The 213/4" x 333/4" Klamp Table Top surface is constructed of Melamine material.

LEIGH Hold-Down Clamps

Leigh Industries has converted their proven design of cam-action clamping into a hold-down system that performs equally well as their dovetail jigs. The Bench Hold-Down Clamp mounts in any 3/ " diameter hole and uses a 3/ " threaded rod 4 8 and speed nut to quickly attach to any table top or workbench (up to 41/4" thick). Bench clamps are

Credit Card Orders: 800 225-1153

A

Pinnacle® Bench Dogs American made, Pinnacle® Brass Bench Dogs are manufactured to fit a 3/4" diameter hole, and have a 2° negative slope, cross hatched face to ensure that your work piece “stays put”. A wire side spring provides friction necessary to keep the dog in place, while allowing for easy removal and placement in any 3/4" hole. The Pinnacle® Bench Dog measures 43/8" long and the Pinnacle® Bench MiniDog is 23/8" long. Sold in pairs. 151101 (A) Pinnacle® Bench Dog................$29.99 151075 Pinnacle® MiniDogs........................$24.99 Five Klamp Blocks included with the Klamp Table Top provide the ability to quickly and accurately register the workpiece and bring the project into alignment. Each Klamp Block can be oriented for face frame widths of 11/2", 2", 21/2" or 3" such that the components of the frame can be loaded on the table and held square. The Universal Steel Stand measures 28" wide by 20" deep and adjusts from 32" to 37" in height. Add 6" throat Long Reach Klamp for expanded versatility. Use the 333/4" long Klamp Trak to create your own clamping solutions. The Klamping Table Kit includes the Klamp Table Top and the Universal Steel Stand. Add a 6" throat Long Reach Klamp for expanded versatility. Use 333/4" long Klamp Track to create your own clamping solutions. 148007 Klamp Table top......................... $249.99 148008 universal steel stand................. $149.99 148010 Klamping Table kit..................... $399.98 148009 repl. Klamp Table surface............$79.99 149093 extra Klamp Table Klamp............$29.99 149094 Long Reach Klamp...................... $34.99 148164 Klamp trak, 333/4"....................... $44.99 148165 Extra Klamp blocks (5).................$14.99 148166 universal casters (4).....................$59.99 ideal for drill press tables and free-hand routing, sanding or carving. Easily secure jigs and fixtures to bench tops. The Surface Hold-Down Clamp has the same clamping head however rather than clamping through the work surface the included Anchor is recessed in the surface and the clamp slides into a keyhole slot. Anchors are 11/2" diameter and 5/16" thick and are mounted via bolts from below or screws in the work surface. Anchors are available separately so you can use the clamp in multiple locations. 149059 bench hold-down........................ $45.99 149060 surface hold-down ..................... $45.99 149061 clamp anchors (4pk)....................$19.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Workbenches

Elite Duo 1500

Nordic Plus

SJÖBERGS Woodworking Workbenches The New Generation

Sjöbergs of Sweden has been manufacturing quality workbenches for over 80 years. The product line is designed to meet the needs of the modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Sjöbergs has two bench series, the Elite program, which is the top quality series, and the Nordic Plus program, which is more economical. Both series offer a complete range of sizes to meet your exact needs and come with a ten year warranty. All the Sjöbergs models are reversible, making them 100% suitable for both right and left handed woodworkers. Elite Duo 1500 Workbench. “Amazingly versatile” is the best description for the Duo workbench from Sjöbergs. With four interchangeable vise locations and a double row of bench dog holes, the Duo

offers endless clamping options. It is also completely adaptable to either right or left handed use! The sturdy top and trestle are both crafted in oiled European beech. Included with the Duo are eight bench dogs, one pair of jaw protectors for clamping small work pieces in the vises and two holdfasts for clamping onto either the front or top of the bench. This bench is available with or without a storage cabinet (#146473). 145896 elite duo 1500* (shown)............. $549.99 146535 elite duo 1500 w/cabinet*.......$1,029.99 Nordic Plus Workbenches. Based upon the latest Sjöbergs design, the Nordic Plus series gives you the size you need at a price you can afford. The bench top is constructed in hard Nordic Birch. The amazing versatility of vice location permits left or right handed use, clamping on both ends, or dual clamping on the front. All of the wood in the bench

is FSC certified which guarantees forestry renewal. The hard Nordic birch top is built to last for a lifetime of normal use. Supplied with four steel bench dogs with a plastic coating to protect your edge tools. There is a double row of 3/4" clamping holes working from each of the four vise locations, giving an endless opportunity to clamp your work! Shipped at our regular shipping & handling rate plus $15 for excess weight. 146468 nordic plus 1450......................... $439.99 146469 nordic plus 1660......................... $499.99 146470 nordic plus 1950 (shown)........... $549.99 Because of their heavy weight and large size, benches marked with asterisk(s) are shipped at our regular shipping and handling rate plus an additional fee for excess weight. * = $55, ** = $75, *** = $125.

Duo 1500 & Nordic Plus Series Accessories: Duo 1500 Storage Cabinet. Similar to the SM04 cabinet, but comprised of one 3-drawer section and a wide, 2-door cupboard. Box is 403/4" long x 181/2" deep x 161/8" high. Assembly required. 146473 SM03 cabinet.................................................................................................................$539.99 Nordic Plus Storage Cabinet. Features include two sliding doors with access to a large (241/4" x 15" x 15" open cabinet and four drawers measuring 31/2" x 121/4" x 121/4" each. Entire case measures 383/4" x 18" x 175/16". Assembly required. 145267 nordic plus cabinet......................................................................................................... $169.99 Duo/Nordic Plus Accessory Kit includes four 3/4" plastic coated steel bench dogs, two holdfasts and a set of jaw protectors. 146479 . ................................................................................. $84.99 146476 (C) 3/4" dogs, plastic coated (4)............................... $41.99 146478 (D) aluminum jaw protectors, 1 pair....................... $10.99 146151 (E) 3/4" duo/nordic holdfast, 1 pair......................... $36.99 146492 steel anvil.................................................................. $50.99

B

C

SM03 Cabinet

E

D

C

A Nordic Plus Cabinet

Length Bench Model Stock # Height of Worktop Elite Duo 1500 145896 34" 53" Elite Duo 1500 Combo 146535 34" 53" Nordic 1450 146468 331/2" 523/4" Nordic 1660 146469 331/2" 61" Nordic 1950 146470 331/2" 711/2"

Width Total Length of 1-vise 2-vise Worktop 573/4" 63" 21" 573/4" 63" 21" 577/8" 63" 195/8" 661/8" 711/4" 195/8" 771/2" 823/4" 195/8"

Clamping Top Thickness Vise Max. Distance Bench Shipping Center Skirt Opening 1-vise 2-vise Weight Weight 11/8" 23/4" 41/4" 541/2" 63" 89 lbs. 95 lbs. 11/8" 23/4" 41/4" 541/2" 63" 143 lbs. 154 lbs. 11/8" 23/4" 41/2" 541/4" 621/2" 66 lbs. 79 lbs. 11/8" 23/4" 41/2" 623/4" 711/4" 73 lbs. 76 lbs. 11/8" 23/4" 41/2" 74" 821/4" 79 lbs. 86 lbs.

Helping You Make Wood Work ®

49


Workbenches

Rousseau Work Bench System

The Rousseau WorkBench System offers 15 different footprints that are sure to fit your needs. Each assembled stand provides support for a work surface of your choice, as well as the addition of a middle and bottom shelf. The legs are heavyduty 12-gauge steel to provide more than enough support for bench top tools or large work surfaces. Each leg set includes four 32" long legs, 41/2" long heavy-duty adjustable levelers, and all assembly hardware for a complete workbench. Extenders are 16-gauge steel and come six to a box in five dimensions: 15", 20", 28", 40" and 44". Extenders can be mounted flush to support the top surface or 6" below the top to accommodate a drawer or woodworking vise. All legs and extenders are pre-drilled to add sides and hinged doors for an enclosed cabinet and powder-coated with a durable black finish.

ROCKWELL Jawhorse™

The strong and versatile Jawhorse™ replaces your workbenches, your sawhorses, your clamps, your bench vises and so much more. With the Jawhorse you get a second set of hands for all your projects. It’s a powerful, handsfree clamp and sawhorse featuring powerful clamping jaws allowing you to securely clamp virtually anything. You can even clamp wide items like doors or plywood thanks to the 37" clamping width and with the

Work surface and shelf materials are not included. Selecting the components you need is as simple as starting with a Leg Set, then choosing the size Extender Set you need for the length, and width. The optional threaded caster set can be added to your workbench for a mobile work station or maximize the use of a small workshop or garage. There is even a handy chart included in the instructions with a cut-list, for the work surface and shelves, of each possible size configuration. 148371 steel leg set (4).............................$54.99 148372 15" steel extender set (6).............$25.99 148373 20" steel extender set (6).............$34.99 148374 28" steel extender set (6).............$35.99 148375 40" steel extender set (6).............$44.99 148376 44" steel extender set (6).............$49.99 148377 threaded caster set (4).................$59.99 optional extension; you can clamp large sheet goods up to 52" wide. The Jawhorse™ is made of solid steel and features: 1-ton of clamping force, integrated wheel for transport, and a five-year warranty. Specifications: Max Load: 300lbs, Footprint (standing): 39" x 39" x 34", Footprint (folded): 29" x 14" x 13", Weight: 43 lbs. 412024 . .......................................$179.99 149677 log jaw...............................$49.99

B

A Japanese Ryoba Saws

The Ryoba 2720 blade is designed with both rip and crosscut teeth and a wide blade surface for extremely accurate cutting. It is exceptionally well suited to cabinetry, furniture making and other fine wood working projects in medium to hard wood. When cutting thin wood or panels, use a flatter angle to the surface (0 to 10 degrees) to insure minimal wood vibration. Hold the handle with both hands spaced well apart and find the most comfortable position, adjusting slightly for different cutting angles. This saw can be used for flush cutting, but do not over bend the blade. DO NOT force the saw. Long smooth strokes are best, allowing the weight of the saw to do the cutting. 142418 (A) super fine, cross cut 20 TPI...$94.99 142419 (B) fine, cross cut 17 TPI..............$99.99

Mini Dozuki Panel Saw

This mini-dozuki panel saw is superb for producing tight fitting joints. The 150mm (6") long blade is about .012 thick, and is easily changeable when needed. The back brace makes this saw ideal for dovetail joints. A tap on the back loosens the blade, and the replacement just slips into place. 12F34 . .......................................................$38.99 12F35 replacement blade.........................$24.99

B

A Japanese Dozuki Saw

Designed for delicate and intricate work such as joinery, mortising and dovetailing, this is the finest and most accurate Japanese saw. It is excellent for use in cutting moldings and making clean, splinter-free cuts in cabinetry and furniture-making. The blade is so precise that you can make cuts as thin as 1/32". Be careful not to abuse the saw's thin blade. Layered japanese high-carbon steel. Use light, smooth pull strokes and let the saw do the cutting. Cross-cut 26tpi. 142421 . ..................................................... $79.99 143007 replacement blade.......................$54.99

50

VIKA Twofold

Everyone can use an extra work surface. What if that surface or bench could be folded up flat when not in use or even double as a scaffold? Enter the Vika Twofold. Unfold the legs until the non skid polypropylene deck is on top and you have a scaffold 21.7" in height or continue rotating the legs around and extend - you have a workbench that is 47.6" long x 18.7" deep x 31.8" high with a tool tray, drilling hole, protractor and ruler inscribed into the MDF work surface. The Twofold also comes with a built in 3 outlet, 15 amp surge protected power strip and a 500 lb. capacity in either configuration. Plenty of strength and stability and at 48 lbs., light enough to be where you need it. 149184 . .....................................................$149.99

Laminated Maple Bench Top

Build your own workbench with one of these 13/4" thick, rugged slabs of maple laminated into a single, warp resistant, self supporting panel creating the perfect work surface. Accurately machined and sanded satin smooth, just attach vises and bore dog holes.These tops are also perfect for kitchen work surfaces, coffee tables and bars. Ultraviolet cured acrylic finish is resistant to water, alcohol and solvent detergents. Shipped at our regular shipping & handling rate plus $15 for excess weight. 145685 24" x 60", 70 lbs........................ $249.99 145686 30" x 60", 88 lbs....................... $269.99 145687 24" x 84", 98 lbs....................... $299.99

Bakuma, American Slim Cut

Bakuma Cross Cut Saws offer an aggressive cutting action which is great for general purpose, quick cutting of both hard and soft woods. 300mm saw has 13 TPI and is 27" long, blade is 113/4". 0.7mm (.0275") thick. 126312 . ......................................................$28.99 126314 replacement blade........................ $15.99

No Set On Teeth And Flexible Blade Allow 'Kugihiki' Saws To Cut Flush Without Scratching

Japanese Keyhole And Trim Saws

Japanese Carvers, Detail Trim Saw. This very small keyhole style saw is perfect for cutting roughouts or removing excess stock in tight areas of carving blanks. Woodworkers will find this saw particularly useful for fine trimming and fitting of joints. The narrow 18 TPI, 43/4" blade is riveted into an ebony handle. Overall length 9". 06Q32 (A) detail.........................................$25.99 06Q33 (B) keyhole.....................................$18.99

Credit Card Orders: 800 225-1153

Japanese “Kugihiki” Flush Cutting Saw

Allows the cutting of dowels, pegs, through tenons and excess trim without marring the surrounding surface. How? The teeth on this special tool have no set, so the blade can cut right at the surface without disfiguring it. Its flexibility also permits access to tight spots and it's a great knuckle saver too. Blade has a 53/4" cutting edge and 22 TPI. 12F24 . ....................................................... $27.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Saws A PUTSCH German Hand Saws

Manufactured by one of Germany’s most respected sawmakers, these saws are a great value for their cost. German steel blades are hand sharpened and set, then mounted in European Beech handles. Backsaw has a thin .054" kerf. 144823 24", 7 TPI, rip.................................$44.99 144825 13" blade backsaw, 15 TPI........... $47.99

B

C B D

E

Japanese Hand Saws And Accessories

Dozuki Saws with Replaceable Blades. Dozuki saws are popular with Japanese craftsmen for cutting fine furniture joints. These saws feature the precision and durability of tensioned high carbon steel blades which are easily removed from their bamboowrapped handles for replacement when worn. (A) Ryoba Saws are used by Japanese craftsmen to cut large joints found in architecture, furniture construction and boatbuilding. They have two working edges, the crosscut edge has 9 TPI and the rip 41/2 TPI. Made of the highest quality tempered steel with a long tang securely held in a wooden handle. Teeth cut on the pull stroke. Cloth case included with Ryobas only. Large Ryoba Saw has 300mm (113/4") cutting edge. Overall length 725mm (281/2"), blade tapers from 99mm (37/8") to 125mm (415/16"). 6-9 TPI. 06Q21 300mm ryoba................................$69.99 Small Ryoba Saw has 210mm (81/4") cutting edge. Overall length 540mm (211/4"), blade tapers from 74mm (27/8") to 92mm (35/8"). 10-16 TPI. 06Q11 210mm ryoba................................$49.99 (B) Crosscut Razorsaw is designed for quick cutting of hardwoods. Blade has 13 TPI, is 240mm (97/16") long, 52-70mm (23/4") wide, is of thicker stock (0.6mm) than our regular Dozuki saws for added rigidity, and is easily removed from the 103/4" handle by loosening a single screw. 02P62 .......................................................$36.50 02P72 replacement blade........................$25.99

(C) Dozuki “Z” Saw is one of the smoothest cutting saws you’ll ever use, ideal for tight-fitting, precision joinery. The 26 TPI x .012" thick blade of this saw (the best-selling saw in Japan) can be quickly changed by a simple tap on the back. Rigid back ensures accurate cuts with the 240mm (91/2") x 60mm (23/8") blade. Overall length 535mm (21"). 12F27 .......................................................$54.99 12F28 replacement “Z” blade.................$28.99 (D) Japanese Beading Saw. This precise saw is great for very small, fine joinery work where accuracy and saw control are critical. Developed with, and for, period furnituremaker Ron Clarkson, this saw is perfect for creating those small, delicate dovetails seen on the finest antique furniture. Pull stroke cutting with this .010" thick 23 TPI, steel backed beading saw leaves precise, thin kerfs (approx. 1/64") and unbelievably smooth cuts. Overall length 14 1/2", blade is 71/4" with a 6" cutting length, maximum cutting depth is 1/2". 126375 ....................................................... $21.99 (E) Feather Edge Saw Files are specially designed to sharpen the very fine teeth of Japanese handsaws or European backsaws. The small 75mm Yasuri is for sharpening Dozuki saws, the larger 100mm file is for larger Ryoba teeth. 06Q12 dozuki file....................................... $19.99 06Q13 ryoba file........................................ $27.99 06Q10 set of 2 Save $12!.........................$35.98

A ‘Lynx’ Handmade Saws

‘Lynx’ brand saws, are individually produced by a craftsman so you can be confident you will receive a reliable tool that will not fail under constant hard use. Setting and grinding of the teeth is done by hand so that proper tooth geometry is maintained for the best cutting action. Stained European beech handles are fitted to blades with solid brass mounting bolts. (A) Lynx Back Saws. Strong, polished brass backs give these cabinet saws the extra rigidity for cutting perfectly straight tenons, dovetails, and other joints. Crosscut style teeth. Blade

TPI Depth of Cut Kerf

147411 8"......... 20....... 21/4"..... .048"......$94.99 147410 12"........ 15......... 3"....... .048"......$85.99 147409 14"........ 15....... 33/4"..... .054"....$119.99 (B) Lynx Hand Saws. Taper ground blade provides friction-free cutting and the hollowing of the back reduces weight, improves balance, and lets the saw tip start a cut . Available in standard 26" length, and smaller 22" blade. Blade

TPI

Style

147408 22"...........10.......... crosscut.........$89.99 147406 26"............9........... crosscut...... $111.99 147407 26"..........41/2 .............rip........... $104.99

Pax 1776 Backsaw

Measuring Saw Teeth

Saw And Mini-Miter Box Set

This mini-miter set is perfect for cutting wood inlay material, small moldings, pen blanks or for other precise cutting and mitering. The .01" thin blade perfectly matches the thin slot miter box. The 24 TPI saw cuts through just about any type of materials, including dense exotic woods. The aluminum miter box holds material up to 2" wide and 7/8" thick for cuts at 90, 45, and 30 degree angles. 140347 .......................................................$20.99

Saw Teeth are measured by one of two systems illustrated below. Each is based on the “inch” scale. Teeth per inch (TPI) indicates the number of teeth between saw gullets. Points per inch (PPI) is the European system and measures teeth from tip-to-tip.

8 points per inch

Made in Sheffield England, by Thomas Flinn, using the same exacting , high standards as they did two hundred years ago. The folded brass back provides excellent balance and blade rigidity under downward pressure for fast and accurate crosscuts. The comfortable hand finished, English Elm grips provide a beautiful accent to the saws. The Carcass Backsaw is used for precision cuts across the grain. The blade has .003" set, with 13 points per inch and is filed for a crosscut that produces a .026" kerf. Overall length is 163/4", usable blade is 12" long x 27/16" deep. 150701 carcass backsaw.........................$124.99

www.woodcraft.com

1" 1" 7 teeth per inch

Helping You Make Wood Work ®

51


Saws FORREST Duraline Melamine And Plywood Blade

FORREST Premium Carbide Saw Blades

Cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade. Featuring super hard, long-life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top-quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors.

Designed for perfect, chip-free cuts on melamine and plywood, the Duraline Hi-A/T virtually eliminates the need for a scoring saw. The 40° points slice through thin bottom layers with no tears or chips. Recommended for thin, low pressure, 2-sided laminates, plywood and fine crosscutting on all woods. Made with double-hard C-4 submicron carbide for longer life between sharpenings. 10" x 80T, .125" kerf, 5/8" arbor hole. 943304 .....................................................$149.99

Woodworker II

This ATB blade is our most popular for general table saw use. If most of your cutting is stock 11/2" or thicker, Forrest recommends the 30 tooth blade. Plate thickness of .090, kerf is 1/8". 85N52 40 tooth.......................................$109.99 85N53 30 tooth.........................................$94.99 150268 48 tooth.......................................$134.99

Thin Kerf Blade

This blade works easier and more efficently. Thin kerf reduces motor load and wastes less of your valuable stock. Plate thickness of .075, kerf is 3/32". 85T72 40 tooth.......................................$109.99

FORREST Woodworker II 10" 40T #1 Grind

The #1 Grind is a custom version of our top selling Woodworker II from Forrest Manufacturing. It produces a square flat-bottomed cut for box joints, splines, keyways, drawer bottom grooves and any place else that you want a clean, flat cut. 10" x 40T, .125" kerf, 5/8" arbor hole. 148387 .....................................................$119.99

C

A

B

WoodRiver® Fret And Coping Saws

(A) Deluxe Coping Saw Frame. This is a sturdy, well built saw that allows standard pin end coping saw blades to be tensioned at both ends of the frame, Blades can be turned 360° to saw in any direction. Depth of cut is 43/4", comes with a 15 TPI blade. 141403 ......................................................$16.99 141404 fine blades 20 TPI (12).....................$7.99 141406 medium blades 15 TPI (12)..............$7.99 141405 coarse blades 10 TPI (12)................$7.99

52

FORREST 8" Dado King

If you’re looking for the finest dado set on the market, look no further than the Dado King from Forrest Manufacturing. The Dado King features all of the same quality and precision found in Forrest blades. Each outside cutting blade is 8” in diameter with 24 precisely ground C4 carbide teeth. The chippers are the 4-wing type, again equipped with the same high quality C4 carbide teeth. Includes four 1/8" chippers, one 3/32" chipper, and one 1/16" chipper. With various combinations, dadoes from 1/ " through 29/ " in width are possible and can be 4 32 set to precise widths with the included magnetic shim set. Also includes high-impact storage case. 943309 .................................................... $299.99

FORREST Woodworker II 10" 20T Rip Blade

This 10″ ATB/Raker blade is very aggressive and designed specifically to rip through heavy, thick stock. We tested this blade by cutting 3" thick red oak and found the results to be exceptional. There was no hesitation required when feeding stock into the blade and the cut had absolutely no burn marks. 10" x 20T, .125" kerf, 5/8" arbor hole. 148959 ....................................................... $74.99

FORREST 5″" Blade Stiffener

Helps dampen motor vibrations transmitted to the teeth of the blade, while greatly reducing cutting noise. Hardened and precision-ground flat within .001″. For use with 10" saw blades. 943312 ....................................................... $29.50

(B) Deep Throat Fret Saw is an excellent choice for detailed marquetry and scrollwork where great depth is required. Uses 5", flat end, fret, scroll, jewelers or spiral saw blades. Depth of cut is 111/2". 141407 ...................................................... $22.99 (C) Adjustable Frame Fret Saw is a traditional jewelers saw frame that accepts plain end blades from 21/2" to 6" in length. Throat depth is 3". Perfect for veneers, thin plastics, and thin gauge brass. 141410 ......................................................$22.99 Fret Saw Blade Assortment includes 36 blades in the skip-tooth pattern for general cutting in a variety of materials. Assortment includes one dozen each of #2 - 20 TPI, #5 - 12.5 TPI and #7 - 11.5 TPI. 141560 ...................................................... $14.79 Specialty Marquetry Blades. These 5" blades are used for extremely intricate sawing in wood, plastic and hard rubber 1/16" to 1/4" thick. Both are approximately .023" wide, .008" thick, and have 33 TPI. 141408 3/0 skip-tooth (12)............................$7.99 141409 3/0 double-tooth (10).......................$7.99

Credit Card Orders: 800 225-1153

FORREST Chopmaster Saw Blade

Chopmaster Saw Blades are specially designed for sliding compound miter saws and radial-arm saws to minimize grabbing and throwing of scrap cut-offs. This blade has a heavier than normal steel plate and a negative face hook. Its Double-hard C-4 submicron carbide steel yields up to 300% longer life. Blades are hand-straightened to a runout of .001/.002" . The tooth style (4 points and flat) produces steady, clean extra-smooth cuts with no bottom splintering. The 10" blade has a 7/64" kerf and 5/8" arbor hole, 12" has a 1/8" kerf and 1" arbor hole. 814942 10" blade 80T..............................$125.99 811869 12" blade 80T..............................$135.99 150266 10" blade 90T..............................$169.99 150267 12" blade 90T..............................$179.99

Circular Saw Tooth Patterns

FTGGrindATBR TCG with flat ATB topsSATB Flat Top - FTG. Teeth and faces separate wood fibers with a chipping action to lift out waste like tiny paddles. Designed for general ripping, they cut efficiently with the grain.

Alternate Top Bevel with Raker - ATBR. The addition of a raker tooth to an ATB blade transforms it into a combination blade capable of cross and rip-cuts. Triple Chip Grind - TCG. Two shapes of teeth are alternated to produce three chips within the kerf. One tooth cuts a chip down the center while the next cut chips from both sides. This grind is used when the material is too hard or abrasive to use an FTG blade. Alternate Top Bevel - ATB. Flat-faced teeth with alternating top bevels sever wood fibers first on one side, then the other. Designed for general across-the-grain and undefined grain cutoff and trimming. Steep or High Alternate Top Bevel - SATB or HATB. The steep grind of these blades results in very smooth, splinter-free crosscuts. Lower hook angle requires slightly more feed pressure.

Free Technical Advice: 800 535-4486

www.woodcraft.com


Saws FREUD Saw Blades

Cut with a blade that will last longer and give you superior performance! Freud blades bodies are made of high-strength steel, Rc 40 to 45, so the blades remain flat and true, even after years of use. Computer-controlled equipment Precisely the best pretensions Freud saw blades to ensure they remain flat through the life of the blade. Unlike most blades that are stamped die-cut, each Freud blade body is cut to the exact size by a high-performance lasers. Laser-cut expansion slots reduce noise and allow the blade to expand and contract as needed during operation. Carbide specifically designed and manufactured by Freud for the woodworking industry uses super micro grain carbide with titanium for cutting teeth that stay sharper longer. Tooth design reduces tooth bite to 1.1mm reducing the effects of kickback from overfeeding. All blades below feature Permanent red Perma-Shield coating for virtual elimination of friction, heat build-up, and gumming which results in longer blade life and prevents development of rust. Thin kerf (TK) blades cut clean and fast with less drain on your saw and less material waste.

FREUD LM75 Thin Kerf Glue Line Rip Saw Blade

FREUD Ripping Blades

Achieve smooth, fast rips in hardwoods and softwoods with Freud Ripping Blades. These blades come in both regular and thin kerfs (TK), and the Glue Line ripping blades produce a cut that eliminates the need for jointing or sanding after the cut. Various tooth configurations and kerf thicknesses allow ripping in material as thin as 1/8" and as thick as 31/2". Arbor is 5/8". Dia.

Teeth

Tooth Design Hook Angle

Kerf

10"...........24T..................FT................. 20°........ .091 (TK) ......$39.99 10"...........24T................ Flat............... 20°........... .126...........$59.00 10"...........30T................ TCG................12°... .126 (glue line) .$69.00

FREUD Premier Fusion Blade

This flagship, premium saw blade is Freud’s best combination saw blade period! Premier blades feature larger carbide tips for more re-sharpenings, a thicker body for durability and straighter, truer cuts, and double ground teeth for a precise exceptional finish. 5/8" arbor. Dia.

835866

Teeth

Tooth Design Hook Angle

FREUD Combination Blades

When you need a single saw blade that will serve multiple purposes, the combination blade is the answer. The “combo” blade gives you the ability to crosscut and rip with the same blade. This blade is the workhorse in most woodworking shops.Arbor is 5/8". 828761 127240 127241

Teeth

Tooth Design Hook Angle

FREUD Crosscut Blades

Features thick micrograin carbide tips that will produce smooth cuts and minimize tear-out. Cross-cut blades are designed for use with table saw, radial arm saws, miter saws and sliding miter saws. Choose the tooth configuration and hook angle to match to task at hand. All blades feature Red Perma-Shield Teflon® coating. 81/2” and 10" blades have 5/ " arbors, 12" blades have 1" arbor. 8 Dia.

813737 826707 832606 825270 147772 127242 821320 127244 828763 833963

Teeth

Tooth Design Hook Angle

Kerf

81/2"......... 48T..................ATB.............. -5°...... .090 (TK)........$57.99 10"............ 60T..................ATB.............. -5°...... .090 (TK).......$64.99 12"............ 72T...................ATB.............. -5°...... .090 (TK)....... $79.99 10"............ 80T..................ATB............... 2°........... .126...........$89.99 8".............. 64T..................ATB.............. 10° ......... .116...........$64.99 10"............ 80T..................ATB.............. 10° ......... .116...........$84.99 12"............ 96T..................ATB.............. 10° ......... .116.........$124.99 10"............ 60T..................ATB.............. 15° . .... .091 (TK).......$54.99 12"............ 80T..................ATB.............. 15° . .... .091 (TK).......$69.99 10"............ 80T..................ATB............... 2° . ........ .098...........$69.99

Kerf

Freud’s Premier Fusion blade is the flagship of their line and one of the best multi-purpose combination saw blades period! Now available in a thin kerf version with 30 degree Hi-ATB tooth featuring their unique double side grind tooth geometry. This design provides a glass smooth side finish while giving a flawless top and bottom finish in veneered plywood’s, hardwoods and melamine. 845842 .................................................................................................... $79.99

8" Dial-A-Width Dado

This Freud 8" stacked dado set has a negative 12° hook angle that will give you flat-bottom grooves and virtually sprinter-free cuts. Includes two 12-tooth outer blades and five 2-wing chippers. The blades and chippers come with Freud’s anti-kickback design. This set will produce 1/4" to 13/16" dadoes in 1/16" increments, and comes with shims, a carrying case and instructions. Arbor is 5/8". 127245 .........................................................$94.97

The Dial-A-Width dado performs like a stacked dado, except without the shims. The exclusive Dial hub ensures accurate adjustments. Adjusts in .004" increments. Maximum 13/16" cut width. Works easily with right, or left-operating machines. Set includes 2 outside blades, 5 chippers, wrench and carrying case. Arbor is 5/8". 813642 .................................................... $269.99

8" Super Dado

Box joint construction on the table saw is now easy. Unlike a dado set, shims and adjustments are not necessary to create perfectly square, flat-bottom box joints. By placing the two 8" blades back to back, you get a 1/4" cut, and by placing them face to face, you get a 3/8" cut. Each set includes two 8" 20-tooth blades, carrying case, and instructions for making box joints and a box joint jig. Arbor is 5/8". 831914 ....................................................... $94.99

Cut everything from veneered plywood and laminates to solid wood, chip and splinter-free with a smooth, flat bottom. This set was one of the first to have a 3/32" chipper which allows the cut width to be adjusted in 1/ " increments, doubling the number of slot widths 32 available. Most plywood today is manufactured 1/32" undersized, but with the 3/32" chipper you can cut dadoes to fit these materials with less shimming. Set includes two 8" 24-tooth blades, six chippers, shims and a carrying case. Arbor is 5/8". 127246 ......................................................$199.99

Kerf

10".............50T.............. Combo............ 10°...... .094 (TK) . ....$54.99 10".............50T.............. Combo............ 10°......... .126...........$59.99 10".............50T.............. Combo............ 10°......... .126...........$69.99

FREUD Premier Fusion 10" x 40T x 5/8" Thin Kerf Saw Blade

10"...........40T...................ATB..............18°............ .126...........$99.99

8" Pro Dado Set

Bring precision to your hand held circular saw! This blade is a perfect partner with popular clamping straight edge tool guides to produce flawless, chipfree results with veneered plywood, m e l a m i n e a n d l a m i n a t e s . T h e c o m b i n a t i o n o f t h e H i - AT B carbide tooth design and anti-vibration slots make these thin kerf blades a great choice for sizing prefinished sheet goods, shelving, cabinets and doors. 844954 .................................................................................................... $49.99

Dia.

Freud’s popular Glue Line Rip blade is now available in a thin kerf version. The LM75 is a perfect match for saws of less than 3 HP, or for when material savings are critical. With this blade, you’ll find your rips smooth and ready for glue-up. Laser-cut anti-vibration slots and Freud’s familiar red non-stick Perma-SHIELD® coating are standard features. Ideal for stock up to 1" thick. 10" Dia.; ″Teeth: 30 TCG; Hook Angle: 12°; Kerf: .091".″ 842617 .....................................................................................................$64.99

127243 825272 825271

FREUD LU-79 71/4" x 60T Hi – ATB Saw Blade

Box Joint Blades Set

See our expanded line of Freud Blades at a Woodcraft Store near you or visit www.woodcraft.com Helping You Make Wood Work ®

53


Saws

OLSON All Pro Bandsaw Blades

OLSON Flex Back Bandsaw Blades

Olson’s blades are a cut above regular flex-back carbon blades! Special heat treatment produces a blade with an extremely hard cutting edge and a spring-tempered back for increased tensile strength. This permits greater tension, improved blade rigidity and straighter, more accurate cuts. All flex-back blades are made with alternate bevel teeth and one raker tooth.

Regular

Skip

Hook

Regular Tooth: Available in finer tooth pitches for smoother cuts in all woods. Not for re-sawing. Hook Tooth: 10° rake angle – best for hard and difficult-to-cut woods. High rake angle makes the blade very aggressive. Skip Tooth: 0° rake angle - best for softer woods. An all-purpose blade, excellent for resawing! 671/2" Blades Width TPI Teeth 1/ ".........14........ regular...... $12.99 147686 4 701/2" Blades Width TPI Teeth 1/ ".........14........ regular...... $12.99 150695 8 1/ "..........4............skip......... $12.99 150696 4 1/ "...........4...........hook........ $12.99 150697 2 72" Blades 3/ "..........4............skip......... $12.99 147688 16 3/ ".........10........ regular...... $12.99 147689 16 1/ "..........4...........hook........ $12.99 147690 4 1 147691 /4"..........4............skip......... $12.99 1/ ".........10........ regular...... $12.99 147692 4 1/ "...........4...........hook........ $12.99 147693 2 1/ "...........4............skip......... $12.99 147694 2 80" Blades 3/ ".........10........ regular...... $13.99 147696 16 1/ "..........4...........hook........ $13.99 147697 4 1/ "..........4............skip......... $13.99 147698 4 1/ ".........10........ regular...... $13.99 147699 4 1 147700 /2"...........4...........hook........ $13.99 1/ "...........4............skip......... $13.99 147701 2 82" Blades 3/ ".........10........ regular...... $13.99 147702 16 1/ "..........4............skip......... $13.99 147703 4 1 147704 /4".........10........ regular...... $13.99 1/ "...........4............skip......... $13.99 147705 2

TPI Teeth 931/2" Blades Width 3/ "..........4............skip......... $14.99 147706 16 3/ ".........18........ regular...... $14.99 147708 16 1/ "..........4...........hook........ $13.99 147709 4 1/ "..........4............skip......... $13.99 147710 4 1/ ".........10........ regular...... $13.99 147711 4 1 147712 /2"...........4...........hook........ $14.99 1/ "...........4............skip......... $14.99 147713 2 3/ "..........4............skip......... $18.99 147714 4 3/ "..........4...........hook........ $18.99 147715 4 105" Blades 3/ "..........4............skip......... $15.99 147716 16 3/ ".........18........ regular...... $15.99 147718 16 1/ "..........4............skip......... $14.99 147719 4 1/ "..........4...........hook........ $14.99 147720 4 1 147721 /4".........10........ regular...... $14.99 1/ ".........18........ regular...... $14.99 147722 4 1/ "...........4............skip......... $15.99 147723 2 1/ "...........4...........hook........ $15.99 147724 2 3 147725 /4"..........4............skip.........$20.99 3/ "..........4...........hook........$20.99 147726 4 111" Blades 3/ " x ... 10T ........Reg.......... $16.99 147902 16 1/ " x ....... 6T ........ Skip......... $15.99 147903 4 1 147904 /2" x ..... 4T ........Hook......... $16.99 3/ " x ...... 4T ........Hook.........$20.99 147905 4 3/ " x 4...... T . ........ Skip.........$20.99 147906 4 133" Blades 3/ ".........18........ regular...... $19.99 147727 16 1/ "..........4...........hook........ $18.99 147728 4 1/ "..........4............skip......... $18.99 147729 4 1/ ".........10........ regular ..... $18.99 147730 4 1/ "...........4...........hook........ $19.99 147731 2 1361/2" Blades, Jet & Delta 18" saws. 5/ "..........3...........hook........$24.99 147732 8 3/ "..........3...........hook........$25.99 147733 4 147734 1"............2...........hook........ $28.99 147735 11/4"........ 1.3..........hook . ..... $39.99 142" Blades 1/ ".........10........ regular......$19.99 147736 4 1/ "...........4...........hook........$20.99 147737 2 3/ "..........4............skip......... $25.99 147738 4 147739 1"............3............skip ....... $28.99

Custom Bandsaw Blades. We will custom weld a bandsaw blade to any length! Give us the exact length in inches and the stock number from the chart below. (All fractional lengths will be rounded up to the next full inch for pricing.) T ooth Pattern 1/ " 4

Widths 3/ " 8

1/ " 2

Length

147685 147687 147695 144918 144919 144920 144921 143940 143941 143942 143943 143944 143945 143946 143947 147637 147638 147639 147640 147641 144922 144923 144924 144925 144926 144927 144928 144929

Width

TPI

Teeth

671/2"..... 1/8".....14......regular.....$15.99 72"....... 1/8".....14......regular.....$15.99 80"....... 1/8".....14......regular.....$16.99 82"....... 1/8".....14......regular.....$16.99 82"....... 1/4"......6.......regular..... $16.99 82"....... 3/8"......4......... skip........ $16.99 82"....... 1/2"......3........ hook........$17.99 931/2"..... 1/8".....14......regular.....$18.99 931/2".... 3/16".....10......regular.....$18.99 931/2"..... 1/4"......6.......regular.....$18.99 931/2"..... 5/8"......3........ hook.......$22.99 105"...... 1/8".....14......regular..... $19.99 105"..... 3/16".....10......regular..... $19.99 105"...... 1/4"......6.......regular..... $19.99 105"...... 5/8"......3........ hook.......$24.99 111"..... 3/16".....10......regular.....$20.99 111"...... 1/4"......6.......regular.....$20.99 111"...... 3/8"......4......... skip........$20.99 111"...... 5/8"......3........ hook....... $27.99 111"...... 3/4"......3........ hook....... $27.99 123"...... 1/4"......6.......regular.....$21.99 123"...... 3/8"......4......... skip........$21.99 123"...... 5/8"......3........ hook....... $27.99 123"....... 1".......2........ hook.......$30.99 133"...... 1/4"......6.......regular.....$22.99 133"...... 3/8"......4......... skip........$22.99 133"...... 5/8"......3........ hook.......$29.99 133"....... 1".......2........ hook.......$32.99

931/2" Assortment Pack contains our three most popular blades for 14" bandsaws: 3/16" 10T; 1/4" 6T; 5/8" 3T. 147522 3-pack............................................$49.99

Price per inch

Regular 49G01 49G05 49G09 $0.30 Inch Hook 49G02 49G06 49G10 $0.30 Inch Skip 49G03 49G07 49G11 $0.30 Inch

WoodRiver® Deluxe Bandsaw Blade Brazing Kit

Repair broken bandsaw blades or fabricate new ones! Brazing fixture accepts steel or bi-metal blade stock from 1/16" up to 11/4" wide. The jig is easy to use, even without a vise, with only a 180° movement of the clamps needed to change from narrow and regular width blades to wide. The kit can also be used to make blades from coil stock. Kit includes a file for smoothing the joint, a novel torch that works off a Cricket® style disposable lighter (not included) for brazing, solder, flux, applicator brush and complete step-by-step instructions – enough material for the repair of several broken blades. 144187 ...................................................... $34.99 144188 repl. solder and flux....................... $9.99

54

Have a tooth hardness of Rc 62-64, with a tempered back to aid stiffness and increase cut accuracy. Rakerset teeth (every third tooth is unset) are best suited for cutting wood, plastic and non-ferrous metal. Blades are designed for heavy-duty use in furniture manufacturing, as well as fine craft work. Blade formulation contains pinpoint carbides, molybdenum, chrome and silicon, with a molecular structure that gives great metallurgical consistency for superior welds and sharpness retention. ‘Hook’ blades are resaw blades, with a .025" thickness, versus standard blade thickness of .032", they slice through stock more efficiently while consuming less wood in the process.

Credit Card Orders: 800 225-1153

CARTER AccuRight™ Bandsaw Blades

New precise, durable AccuRight bandsaw blades. Precision milled teeth ensure smooth, accurate cutting and induction hardened flex back steel offers maximum blade life and sharpness.

838641 838367 838369 149976 838368 838370 149977 838372 838373

Free Technical Advice: 800 535-4486

Length

Width

TPI

Teeth

931/2"..... 3/16".....10...... regular.....$22.99 931/2"....... 1/4"......4....... hook.........$22.99 931/2"....... 1/2″"......3....... regular.....$22.99 105"........ 3/16".....10...... regular.....$23.99 105"......... 1/4"......4....... hook.........$23.99 105"......... 1/2"......3....... regular.....$23.99 111"........ 3/16".....10...... regular.....$24.99 111"......... 1/4"......4....... hook.........$24.99 111"......... 1/2"......3....... regular.....$24.99

www.woodcraft.com


Woodboring

Self-Centering Hinge Drilling VIX Bits

TIMBER WOLF Bandsaw Blades

The worlds only thin-kerf, low-tension, silicon steel bandsaw blades will outlast your old carbon steel blades by a mile! It has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake, 5-tooth set pattern and .025" thick thin-kerf blade and you have an awesome bandsaw blade! 140811 144704 140812 140813 144705

1/ " 4 1/ " 4 1/ " 4 1/ " 2 1/ " 2

141077 144706 141078 144707 141079 141080 144708

1/ " x 82", 14 TPI...........................$32.99 8 3/ " x 82", 10 TPI.........................$22.99 16 1/ " x 82", 4 TPI.............................$23.99 4 1/ " x 82", 6 TPI.............................$23.99 4 1/ " x 82", 10 TPI...........................$23.99 4 1/ " x 82", 3 TPI.............................$25.99 2 1/ " x 82", 4 TPI.............................$25.99 2

140175 144709 140177 144710 140180 140183 144711 140187 140189

1/ " x 93 1/ ", 14 TPI..................... $33.99 8 2 3/ " x 93 1/ ", 10 TPI.....................$24.99 16 2 1/ " x 93 1/ ", 4 TPI........................$25.99 4 2 1/ " x 93 1/ ", 6 TPI........................$25.99 4 2 1/ " x 93 1/ ", 10 TPI......................$25.99 4 2 1/ " x 93 1/ ", 3 TPI.........................$28.99 2 2 1/ " x 93 1/ ", 4 TPI........................$28.99 2 2 1/ " x 93 1/ ", 10 TPI.......................$28.99 2 2 3/ " x 93 1/ ", 3 TPI........................$33.99 4 2

144712 140178 144713 140181 140184 144714 140188 140190

3/ " x 105", 10 TPI.......................$26.99 16 1/ " x 105", 4 TPI........................... $27.99 4 1/ " x 105", 6 TPI........................... $27.99 4 1/ " x 105", 10 TPI......................... $27.99 4 1/ " x 105", 3 TPI...........................$30.99 2 1/ " x 105", 4 TPI...........................$30.99 2 1/ " x 105", 10 TPI.........................$30.99 2 3/ " x 105", 3 TPI........................... $37.99 4

835869 835870 835871 835872

1/ " x 111", 10TPI .........................$28.99 4 3/ " x 111", 4TPI . .........................$30.99 8 1/ " x 111", 4TPI .......................... $31.99 2 3/ " x 111", 3TPI ..........................$38.99 4

x 80", 4 TPI.............................$22.99 x 80", 6 TPI.............................$22.99 x 80", 10 TPI...........................$22.99 x 80", 3 TPI.............................$24.99 x 80", 4 TPI.............................$24.99

144715 3/16" x 133", 10 TPI.......................$31.99 144716 1/4" x 133", 6 TPI...........................$32.99 144717 1/2" x 133", 4 TPI...........................$36.99 140185 1/2" x 133", 8 TPI...........................$36.99 140191 3/4" x 133", 3 TPI...........................$44.99 140192 1" x 133", 3 TPI, .032" thick.........$46.99 146533 1/4" x 137", 6 TPI...........................$32.99 146534 1/2" x 137", 4 TPI...........................$36.99 830598 3/4" x 137", 3 TPI...........................$44.99 830599 1" x 137", 3 TPI.............................$46.99 829911 1/4" x 142", 6 TPI...........................$34.99 829912 1/2" x 142", 4 TPI........................... $37.99 829910 3/4" x 142", 3 TPI...........................$45.99 830096 1" x 142", 3 TPI.............................$48.99

SNAPPY Quick-Change Hinge Bits

These 1/4" hex drive bits and accessories let you quickly and easily change from one bit to the next. Spring loaded, self-centering hinge bits for #2 through #10 screws, will perfectly align your screw holes with the holes in your hinges, drawer slides or other similar hardware. The 1/4" and 5mm bits are designed for use with shelf pin drilling jigs. USA. 830809 hinge bit, 5/64" (#2 - #4 screws).... $9.99 830810 hinge bit, 7/64" (#6 screws)......... $11.50 830811 hinge bit, 9/64" (#8 - #10 screws).$11.99 146721 set of 3 (5/64", 7/64", 9/64").............$29.99 146727 5/64" replacement bit..................... $2.99 146728 7/64" replacement bit..................... $2.99 146729 9/64" replacement bit..................... $2.99 830812 shelf pin bit, 1/4"..........................$26.99 148011 shelf pin bit, 5mm.......................$26.99 148013 1/4" replacement bit...................... $9.99 148012 5mm replacement bit................... $9.99 Snappy Quick-Change Chuck easily switchies from countersinks to driver bits with 1/4" hex shank ends. Bits are securely locked in the drive channel with a hardened chromium steel ball, not a flimsy wire lock. To release, pull back and it’s ready for the next bit. Fits 3/8" and larger drill chucks. USA. 830806 ......................................................... $9.99

These highly accurate bits are used for precise drilling of holes for cabinet and door hinges, door butts and all large and small hardware. Desired depth is achieved by loosening a setscrew, setting the high speed drill bit, then tightening the setscrew. 16I43 5/64" bit for #3 & 4 screws............$13.99 16I41 7/64" bit for #5 & 6 screws............ $12.50 16I42 9/64" bit for #8, 9, 10 screws.........$13.50 16I40 set of 3 above Save $11!..............$28.99 16I46 repl. 5/64" bit.....................................$2.99 16I47 repl. 7/64" bit.....................................$2.99 16I48 repl. 9/64" bit.....................................$2.99

SNAPPY 5-Piece Countersinking Drill Set

In one step, you can drill, countersink, and counterbore the perfect sized hole for #4, #6, #8, #10, or #12 screws. Counterbores are 3/ " or 1/ " dia., ideal for plugs 8 2 or dowel buttons. 1/4" hex shank can be used with power drills and quick change chucks. 830846 5-pc. set........................................ $29.99 830847 5/64" x 3/8" . ..................................... $6.99 830848 3/32" x 3/8"........................................ $6.99 830849 7/64" x 3/8"........................................ $6.99 830850 1/8" x 3/8"......................................... $6.99 830851 9/64" x 1/2"........................................ $6.99 150719 trim head, 1/4" x 3/8"....................... $9.99

SNAPPY Tapered Countersinking Drill Set

FULLER Tapered Drills Boxed Set

Includes all the bits needed to install #6, #8, #10, #12, and #14 wood screws. You get 5 HSS tapered drills, 5 countersinks, 2 stop collars, 3/8" and 1/2" plug cutters, and 2 Allen wrenches. All in a finished hardwood case for protection and storage. 13D18 .......................................................$94.99

Titanium-Nitride Coated Countersinks

These industrial duty countersinks will last 4 times longer than high speed steel models. Super-hard bonded titaniumnitride surface cuts smoother and faster with less pressure than conventional countersinks. For use in any machinable material–steel, iron, soft metals, plastic and especially wood. Available in three sizes to cover all countersinking applications. 1/4" shanks, 5-flutes with 82° included angle. 147209 3/8" diameter.....................................$7.99 04N46 1/2" diameter*................................ $12.99 04N56 3/4" diameter*................................ $14.99 04N40* set of 2 Save $5! . ......................$22.98

Tapered bits allow you to get maximum grip from your wood screws. With the added convenience of 1/4" hex drive you’ll find yourself flying through drilling and driving operations. We recommend the addition of a Quick-Release Hex Drive Chuck for optimum speed and efficiency. Sized for #6, #8 and #10 screws. 146722 .......................... $27.99

Single-Flute Countersinks

Feature a single cutting edge for fast stock removal and chatter-free drilling. This uniquely designed cutting edge shears through wood fibers rather than tearing away at them like traditional countersinks. They’ll cut a wide variety of material in portable drills or drill presses and they’re easily sharpened. 145632 for #4 & #5 screws......................... $9.99 145633 for #6 screws.................................$10.99 145634 for #8 screws................................ $11.99 145635 for #10 screws...............................$12.99 145636 set of 4 Save Over $5!................$39.99 148867 one-way countersink handle.......$14.99

Helping You Make Wood Work ®

55


Woodboring

KREG Pocket Hole Screws

Removable Drill Guide

Fine Thread

Built-In Clamp

Kreg Jig®® K4

The newest Kreg Jig® is the perfect choice for DIY enthusiasts or anyone new to pocket-screw joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, you will finish the job in less time, and with far less effort than you ever thought possible. Pocketscrew joinery makes every joint you build faster and stronger and the Kreg Jig® K4 creates those joints easier than ever before. Its simple design gives you the confidence to start the project, and with joints as easy as - Drill. Drive. Done! - you’ll actually want to finish it. Patented 3-Hole drill guide is adjustable for material thickness from 1/2" to 11/2" and can be removed for repair applications. Features built-in drill bit depth setting gauges, large clamping recess to secure the jig to your workbench, and optional dust

collection shroud for chip-free operation. Includes everything you need to get started - Kreg Jig®® K4, stepped drill bit, stop collar, 6" square drive bit, starter screw set, starter plug set, SkillBuilder™ DVD, and quick-start guide, all inside a compact and durable carrying case. Replacement dust shroud available for K4 and K3 pocket hole systems. Each K4 Drill Guide Spacer compensates for an additional 1/ " in material thickness. 4 149264 Kreg Jig......................................... $99.99 147861 acc. drill guide block................... $34.99 151243 acc. portable base....................... $19.99 149533 acc. dust shroud for K4 or K3...... $9.99 149534 K4 drill guide spacer..................... $9.99 811112 replacement drill bit....................$18.99 817629 replacement stop collar................ $3.99

KREG Jig®® K4 Master System

Kreg Tool’s most popular Kreg Jig® just got better. The new Kreg Jig®®Master System includes the same K4 Kreg Jig® advertised nationally in the broadcast infomercial along with all t he accessories you need to experience Kreg Joinery™ at a higher level. Build projects even better and easier than before. The new Master System will have you building strong joints right out of the box. Kreg Jig® K4 Master System includes: Kreg Jig K4 with dust collection attachment, face clamp, portable base, 3-hole drill guide block, drill guide spacer, material support stop, quick-change drill bit, 6" driver, 3" driver, starter screw & plug set, quick start guide and Skill Builder DVD. For a limited time also includes Kreg Jig® Mini for repairs in tight spots. 151277 .....................................................$139.99

305 Stainless Steel Screws

Used for outdoor and marine applications. 148881 #8 x 11/4", coarse screw (100)......$17.99 148882 #8 x 11/4", fine screw (100)...........$18.99 148883 #8 x 11/2", coarse screw (100)..... $19.99 148884 #10 x 21/2", coarse screw (50)..... $19.99

Kreg Jig® Micro Pocket™ Drill Guide

The all new Micro Pocket™ Drill Guide is a must-have accessory for Kreg Jig K3 and K4 owners! The smaller pocket hole and shorter 3/4" panhead screws combine to secure thinner materials yet keep the head of the screw below your finished surface. Micro Pocket hole is A 25% smaller than standard Kreg pocket holes which is the perfect size for 1/2" material. Smaller pocket hole is less noticeable on exposed joints. Kit includes Micro Pocket drill guide, Micro Pocket drill bit, depth collar and sample pack of #6 x 3/4" panhead screws. Replacement 5/16" diameter Micro Pocket drill bit has 1/ " hex-shank for quick-change chucks. 4 149964 micro pocket drill guide kit...........$49.99 149965 repl. micro pocket drill bit............. $16.99 149966 micro pocket depth collar............... $2.99 Kreg Jig® Panhead Screws (A) The 3/4" length panhead screw is designed exclusively for Micro Pocket™ system. Fine thread is best suited for plywood, composite material and most hardwoods. Available in 100-count, 500-count and 1,000-count quantities. 149967 100-ct. #6 x 3/4" panhead screw ....$3.99 149968 500-ct. #6 x 3/4" panhead screw ...$15.99 149969 1,000-ct. #6 x 3/4" panhead screw............ ........................................................$24.99

56

Coarse Thread

Choose a fine thread screw for hardwoods or coarse thread for softwoods, plywood and composites. Hi-Lo is a dual thread design for general purpose use. 149967 #6 x 3/4" fine pan head (100)........$3.99 149968 #6 x 3/4" fine pan head (500).....$15.99 149969 #6 x 3/4" fine pan head (1000)...$24.99 142257 #8 x 1" coarse (100)......................$4.99 148751 #8 x 1" coarse (500)....................$16.99 142246 #8 x 11/4" coarse (100).................$4.99 142247 #8 x 11/4" coarse (500).............. $18.99 144741 #8 x 11/4" coarse (1,000)............$29.99 824804 #8 x 11/4" coarse (5,000)............$94.99 840287 #8 x 11/4" hi-lo (100)......................$4.99 840288 #8 x 11/4" hi-lo (500)................... $18.99 142248 #8 x 11/2" coarse (100).................$5.99 142249 #8 x 11/2" coarse (500).............. $18.99 834689 #8 x 2" coarse (50)........................$5.99 834690 #8 x 2" coarse (250)....................$14.99 146593 #8 x 21/2" coarse (50)....................$6.99 145752 #8 x 21/2" coarse (250)...............$14.99 142250 #7 x 11/4" fine (100).......................$4.99 142251 #7 x 11/4" fine (500).................... $18.99 144742 #7 x 11/4" fine (1,000)..................$29.99 824803 #7 x 11/4" fine (5,000)..................$94.99 142252 #7 x 11/2" fine (100).......................$5.99 142253 #7 x 11/2" fine (500).................... $18.99 142689 #7 x 1" coarse pan head (100).....$4.99 142690 #6 x 1" fine pan head (100)..........$4.99 833070 #6 x 11/4" fine pan head (100)......$4.99 149570 #6 x 11/2" fine pan head (100)......$4.99 149084 screw assortment kit SK03........$29.99

KREG Blue-Kote™ Outdoor Screws

KREG Pocket Hole Plugs

These real wood pieces are pre-cut at the proper angle to fill and hide Pocket Holes. Just glue and sand flush. Package of 50 ................................................$8.99 Package of 200.............................................$24.99

maple pine oak cherry walnut cedar

Pkg. 50

Pkg. 200

140084 141946 141947 141943 141944 142693

148586 148585 148584 151139 843432 844272

Paint Grade Plugs for projects that will be primed and painted. 147865 paint grade (50).............................. $5.99 148583 paint grade (200)...........................$17.99

KREG Micro Pocket Hole Plugs

Uniquely designed for the Micro Pocket system. Packages of 65 pieces. 848172 cherry.............................................. $6.99 848173 maple.............................................. $6.99 848174 oak.................................................. $6.99 152623 pine................................................. $6.99 848175 paint grade..................................... $4.99

Credit Card Orders: 800 225-1153

Used for the majority of exterior pocket screw applications and general exterior construction. 148478 #8 x 11/4", outdoor screw (100).... $6.99 148479 #8 x 11/2", outdoor screw (100).... $6.99 148480 #8 x 2", outdoor screw (50)........... $5.99 148481 #8 x 2", outdoor screw (250)...... $16.99 148482 #8 x 21/2", outdoor screw (50)...... $6.59 148483 #8 x 21/2", outdoor screw (250).. $19.99 149085 screw assortment kit SK03B.....$39.99

KREG Quick-Change Pocket Hole Accessories

This one kit has everything you need to switch from drilling pocket holes to driving pocket screws faster than ever! Kit includes: new 3/8" diameter step drill bit with 1/4" hex-shank (also available separately); innovative chuck featuring an industrial design which eliminates slippage and optimizes drilling power; 6" long, #2 square-drive bit perfect for pocket screw applications. Use high speed drill setting for cleaner holes. 148990 kit...................................................$29.99 148991 pocket hole bit only........................$17.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodboring

Kreg Jig®® Mini Kit Kreg Jig®® Jr.

If you’re ready to start your next woodworking project or home improvement project, the R3 Kreg Jig® is the tool for you. Kit includes R3 Kreg Jig®, Clamp Pad Adapter, drill bit, depth collar, and Allen wrench all contained in a durable plastic carrying case with built-in depth collar setting gauge and screw selection chart. 147643 .......................................................$39.99

Kit includes: Mini Jig, HSS 3/8" step drill bit, stop collar, and hex key. 144740 Kreg Jig® Mini Kit............................ $21.99 141942 Kreg Jig® Mini only...........................$10.99

KREG Right Angle Clamp

One side of the clamp is formed into a pin that mates perfectly into a 3/8" pocket hole, the other side has a swivel pad that allows the clamp to align perfectly with the mating surface. New comfort grips eliminate pinching when releasing the clamp. 4+ 149089 ..................................... $27.99...... $25.29

KREG Face Clamps

The Premium Face Clamp has a 31/4" reach for face members 2" and smaller. The Large Face Clamp offers a 6" reach for face members 2" and larger. The Extra-Large Face Clamp has a 10" reach for difficult to hold interior members. All clamps have comfort grips. 149086 premium face clamp.....................$22.99 149087 large face clamp...........................$29.99 149088 extra-large face clamp..................$39.99

KREG 90-Degree Corner Clamp

Kreg combines the function of a corner clamp with the convenience of a face frame clamp to create the ultimate clamp for box construction. Self-squaring design pulls drawer boxes into alignment, quickly and easily. Shelving assembly is a snap with 90° corners and T-joints. Large clamping surface protects soft woods against workpiece imprint. Includes quick-adjust handle for varying stock thicknesses Each 4+ up to 11/4". 149090 ..................................$34.99.......$31.49

With the Kreg Deck Jig™ and a few simple tools you already own, you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws. Works great with composite deck boards, ACQ, native softwoods such as redwood, cedar and pressure-treated pine as well as certain tropical hardwoods like ipe, red balau, and ironwood. The jig has an easy-grip handle for a secure hold and complete control over each and every joint. Hardened steel drill guides keep the special stepped bit and driver bit at the precise, optimal angle. Three separate drill guides let you install deck boards in a variety of hard-to-reach areas. Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life. Deck Jig System includes: Deck Jig, deck jig drill bit with stop collar, driver bit with stop collar, three 5/ " spacer rings, three 1/ " spacer rings, sample 16 4 deck screws, instructional DVD and durable carrying case. Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig and feature a KTX #1 square drive to reduce cam-out, a flat-bottom head to resist splitting and a self-tapping tip. ProtecKote™ screws feature three anti-corrosion layers to protect against rusting in a wide variety of decking applications including ACQ treated lumber. Kreg 305 stainless screws provide the best protection against corrosion in the long-term. 150881 Kreg Deck Jig system....................$99.99 150900 repl. drill bit w/depth collar.......... $16.99 151306 repl. driver bit w/stop collar........... $4.99 151307 repl. 5/16" spacer rings, 12 pc. ....... $9.99 151308 repl. 1/4" spacer rings, 12 pc.......... $9.99 150901 100 count, #8 x 2" coarse ....................... Protec-Kote deck screw...................$7.99 150902 700 count, #8 x 2" coarse ....................... Protec-Kote deck screw................$49.99 150903 100 count, #8 x 2" coarse ....................... stainless steel deck screw............$17.99 150904 700 count, #8 x 2" coarse ....................... stainless steel deck screw.........$109.99

Dowel And Tenon Centers

KREG Bench Klamp Systems

Kreg Face Clamps providea quick, easy way to hold rails and stiles in place while installing pocket hole screws. Perfect for assembling pocket hole joints, or as a general hold-down when routing, sanding, and more. Bench Klamp System consists of a 3" x 4", 1/4" thick hard-anodized aluminum insert plate and clamp. Large Bench Klamp System consists of a 10" x 10", 1/4" thick steel plate and that can be used as a stand-alone clamping fixture. Both systems feature a screw head to keyed slot connection which allows for instant removal of the clamp from the plate. Bench Klamp rotates 360° on the plate with 3" throat depth and adjustment handle. Long Reach Bench Klamp has same connection and adjustment handle with 6” throat depth. Insert plates can be routed into your workbench to add multiple clamping locations. 149091 bench klamp system.....................$39.99 149092 large bench klamp system...........$59.99 149093 accessory bench klamp................$29.99 149094 long reach bench klamp...............$34.99 146157 extra aluminum insert plate........ $11.99

Kreg Deck Jig™ System

Dowel Pins

Spiral glue channels to eliminate air pockets and assure good glue distribution. Chamfered ends for easy insertion. Dia.

50M11 50M21 50M31

Length

Qty.

1/ "............. 1 1/ "........... 100............ $4.50 4 2 5/ "............. 1 3/ "........... 100............ $5.50 16 4 3/ "............... 2"............. 100............ $5.99 8

Zinc-plated steel centers perform three basic alignments. For dowelling, the centers will make correctly positioned marks for precise drilling of your second set of holes. To properly position chair rungs or other spindle work, slip a center over the end of your tenon to mark the location for boring. To find the center of a dowel, slip a center over the end and tap lightly. The 8-piece set contains 2 of each size. 123721 8-piece set..................................... $4.99 123717 1/4", bag of 10................................. $5.99 123718 5/16", bag of 10............................... $6.99 123719 3/8", bag of 10................................. $6.99 123720 1/2", bag of 10................................. $6.99

Helping You Make Wood Work ®

57


Woodboring

Tapered Drills, Countersinks And Stop Collars

The combination of a quality high speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws. Tapered drills afford greater gripping power for screws than standard twist drills because they match the tapers of their corresponding screw sizes, allowing the screw to grip along its entire length.   Our matching countersinks are made of high carbon steel and have four flutes for clean, accurate boring with minimum tearout. They are adjustable along the length of the drill and can be tightened with two set screws. The stop collars are also adjustable for varying counterbore depths and can be set just behind the countersink cutters when a counterbore is not necessary. 16-Piece Set. Includes 7 tapered drills from 1/8" to 7/ " by 64ths, corresponding countersinks, two stop 32 collars and Allen wrench in a handy wood holder. 13D09 16-pc. set Save Over $31! . ..........$88.99 12-Piece Set. Designed for cabinetmakers, this set has drills and countersinks for #5, #6, #7, #8 and #9 screws. Includes a 3/8" plug cutter, stop collar and Allen wrench, all in a foam lined case. 143662 ........................................................ $74.99

B

C

A SNAPPY Tapered Plug Cutters

These hex drive plug cutters maximize the torque needed to bore into the hardst woods. Plug cutter set is made of hardened steel for long tool life. Features tapered sides and a chamfered end for easy starting, tight fitting plugs. Set of three cutters for 1/4", 3/8", and 1/2" plugs. 146723 (A) set of 3, 1/4", 3/8", & 1/2"...........$32.99 146724 1/4" plug cutter............................... $10.99 147654 5/16" plug cutter............................ $11.99 830818 3/8" plug cutter.............................. $13.99 147655 7/16" plug cutter............................. $12.99 830819 1/2" plug cutter............................... $16.99 146725 5/8" plug cutter..............................$19.99 146726 3/4" plug cutter...............................$25.99 147656 (B) 1" plug cutter...........................$29.99 830806 (C) quick change chuck.................. $9.99

Tapered Drills also available individually. Diameter

06J41 06J42 06J43 06J44 06J45 06J46 06J47

Screw Size

..............1/8" ................5................... $6.59 ............. 9/64" ...............6....................$7.39 .............5/32" ............... 7....................$7.39 ............ 11/64" ..............8....................$7.69 ............. 3/16" ...............9................... $8.79 ............ 13/16" .............10.................. $8.79 ............. 7/32" ..............12.................. $8.79

Countersinks 06J31 ............. 3/8" . ..............5................... $9.99 06J32 ............. 3/8" . ..............6................... $9.99 06J33 ............. 3/8" . .............. 7................... $9.99 06J34 ............. 3/8" . ..............8................... $9.99 06J35 ............. 3/8" . ..............9................... $9.99 06J36 ..............1/2" ...............10.................. $9.99 06J37 ..............1/2" ...............12.................. $9.99

Give wood screws more bite by preboring with these tapered drill bits. This economical 22 piece set contains 7 drill bits with countersinks, stop collars, and an Allen wrench, all indexed in a wooden stand up box. These bits let you drill perfect holes for #5 through #12 screws with a 3/8" countersink. 146145 .......................................................$23.99

58

High quality carbon steel cutters feature 4 or 5 (depending on size) cutting spurs to quickly remove stock. Make tenons or plugs up to 3" long. Use for joinery, chair spindles, toy making, anywhere you need to create a quick, accurate tenon. 3-piece set features 3/8", 1/2" and 5/8" cutters, 5-piece set also includes 3/4" and 1" cutters. Both sets are packed in a wooden storage box. 141009 3-piece set.....................................$33.99 141010 5-piece set.....................................$59.99

Screw Extractors

The easy way to remove sheared or broken screws! Using a drill press or a power drill with a prebored guide block, these hollow, sawtooth-edged extractors bore a clean hole around the broken screw without damaging the surrounding surface. 1/4" extractor removes up to a #8 screw, 5/16" up to a #10 screw, and 3/8" up to a #12 screw. Overall length 2", both ends are equipped with sawtooth cutting edges. 124210 1/4".................................................... $9.99 124211 5/16"................................................ $11.99 124212 3/8"................................................. $11.99

WoodRiver® 8-Piece Deluxe Plug Cutting Kit

This kit will satisfy most all of your needs for wooden plugs. Includes a straight and a tapered plug cutter in 1/4", 3/8", 1/2", and 5/8" diameters. These quality carbon steel cutters feature fast cutting edges to make smooth sided plugs with rounded shoulders. The straight cutters are self-ejecting. All 8-pieces are fitted and labeled in a handy wooden storage case. 143567 .......................................................$43.99

Stop Collars 06J51 ............. 3/8" . ............ 5-9................. $4.39 06J52 ..............1/2" ............ 10-12............... $5.50

WoodRiver® 22-Piece Tapered Drill Set

Plug And Tenon Cutter Sets

ProGrabit® 3-Piece Extractor Set

This three piece set contains everything you need to quickly and easily remove most Phillips, Torx, or Square Drive screws (sizes 4 through 14) and hex head bolts (No. 10 through 5/16") from wood, plastic or metal when the head has been sheared off. Use any 3/8" variable speed, reversible drill and the self centering tip drills without wondering and walking. Flip the bit and use the screw end to extract the screw or bolt. Drills up to Grade 8 and 10.9 class fasteners. Replacement No. 1 (sizes 4-7; bolts No. 10) and No. 2 (No. 8-10; bolts 1/4") bits cover the most common screw sizes. 148984 .......................................................$22.50 150908 repl. No. 1 bit................................... $9.50 150909 repl. No. 2 bit................................... $9.50

Credit Card Orders: 800 225-1153

X-Out ® #1 & #2

One-step, screw extraction for Phillips, Torx, or Square Drive screws with damaged heads or hex bolts with rounded heads. Using a 3/8" variable speed reversible drill, or manually with a 1/4" hex bit holder, insert the tip in the damaged head and reverse it out. No. 1 (screw 4-7; bolts No. 10) and No. 2 (screw 8-10; bolts 1­/4") bits cover the most common sizes you’ll need to remove. 150910 X-Out No. 1....................................... $9.50 150911 X-Out No. 2....................................... $9.50

MicroGrabit® 4-Piece Extractor Set

For use when smaller screw or boltheads have been sheared off, this professional grade bit is a two-step screw and bolt extractor in one tool! Use any 3/8" variable speed, reversible drill and the self centering, serrated drill tip, not only prevents wondering and walking, but also provides the torque necessary to extract bolt and screws with shanks from 1/8" to 1/4" (3mm to 6mm) in diameter. 150912 .......................................................$26.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodboring

BORMAX Forstner Style Bits

WoodRiver® 16-Piece Carbide Tip Forstner Bit Set

This wood boxed Forstner set is a remarkable value. Sixteen bits, with carbide tips for long life, are neatly and conveniently ready when you need them. Sized by eighths, the bits drill holes from 1/4" to 21/8". Larger bits have shank diameters reduced to 3/8" to allow use with almost any drill press. Shank length ranges from 23/4" (for the larger diameter bits) to 31/8" on the smaller diameter bits. While ideally suited for drill press use, Forstner bits can be used in handheld drills when run at extremely low speeds. 144500 .................................................... $146.99

FAMAG Forstner Bit Set

The versatility and precision of Forstner bits is well known by professional woodworkers. These smaller length bits are forged and machined from alloy steel for dependable service. Unique center spur and circular rim bores side grain, end grain, on angles, or through knots without deflection. Double cutting edges leave flat bottom holes and smooth sides for precision work on solid stock, veneers or laminates. Overall length 31/2". 1/4" through 11/8", have 5/16" shank, 11/4" and above have 3/8" shank. Boxed Set of 7 includes a wooden box to keep bits organized and protected. Includes 1/4", 3/8", 1/2", 5/ ", 3/ ", 7/ ", and 1" diameters. 8 4 8 12B33 set of 7 Save Over $23! .............$82.25 Set of 16. Includes 1/4" through 21/8". No box. 12B43 set of 16 Save Over $96! . ........$319.99 Also available individually 12E46 11/4"....$25.99 12E31 1/4".... $11.99 12E43 13/8"...$26.99 12E32 3/8".... $12.99 12E47 11/2"....$29.99 12E33 1/2".... $12.99 12E48 15/8"...$30.99 12E34 5/8".... $14.25 12E49 13/4"... $37.99 12E35 3/4".... $16.99 12E52 17/8"....$41.99 12E41 7/8"..... $17.99 12E44 2"........$43.99 12E42 1"...... $18.99 12E51 21/8"...$45.99 12E45 11/8" .$25.99 Forstner Bit Extensions. These extensions solve one of the major problems with Forstner bits—their limited depth capacity. Made of high quality, precision machined steel, all have reduced shanks that let you use them in any 3/8" drill. Each uses a hex screw to hold the bit shank in the extension. 144512 5/16" x 5" extension..................... $21.99 144513 5/16" x 93/4" extension.................$28.99 144514 3/8" x 51/8" extension . ................$28.99 144515 3/8" x 97/8" extension...................$35.99

Flat Bottom Holes

Partial Arcs and End Grain Holes

Pocket Holes

WoodRiver® Forstner Bit Sets

16-Piece Set. We’ve seen many imported forstner bit sets here at Woodcraft and quite frankly we were very skeptical when we began to test these. To our surprise these bits looked good, cut clean, and did not burn even though we intentionally tried to “hurt” them with quick, repetitive drill press borings. We believe these are an exceptional value for the hobbyist or occasional user. Bits larger than 1" have “saw toothed” edges to keep the larger cutting edge cool while boring. Includes 1/4" - 21/8" in 1/ " increments, packed in a wooden case. 3/ " SH, 8 8 31/2" overall length. 147067 set of 16 Save Over $39! . .........$78.99 7 -Piece Set. Includes 1/4" - 1" bits in 1/8" increments with 3/8" shanks in a wooden storage case. 147068 set of 7 Save Over $14! .............$24.99 10-Piece Set. Includes 1/4" - 11/2" bits (no 11/8") in 1/8" increments with 3/8" shanks in a wooden storage case. 147069 set of 10 Save Over $26! . ......... $37.99 24-Piece Set. Our most complete set - includes: 1/4" - 31/8" bits in 1/8" increments. Bits less than 21/8" in diameter are 31/2" long with 3/8" shanks; bits 21/4" diameter and larger are 6" long with 1/2" shanks. 145501 set of 24 Save over $108! . .... $164.99 Forstner Bit Extensions add 4" or 10" of extra length to your bits. Attaches to your bit with two set screws. 145705 3/8" shank x 4" extension.................$5.99 145706 1/2" shank x 4" extension.................$6.99 147999 3/8" shank x 10" extension............ $11.50 148000 1/2" shank x 10" extension.............$16.99 Individual Forstner Bits Bits 21/8" or smaller have 3/8" shanks; bits larger than 21/8" have 1/2" shanks. 125923 1/4"........ $3.99 125938 13/8"...... $8.50 125924 5/16"....... $3.99 125939 11/2"...... $8.99 125925 3/8"........ $3.99 147998 40mm .$9.99 125926 7/16"....... $4.99 128143 19/16".... $8.99 125927 1/2"........ $4.99 125940 15/8"...... $9.99 125928 9/16"....... $4.99 125941 13/4"...... $9.99 125929 5/8"........ $5.99 125942 17/8"...... $9.99 125930 11/16"..... $5.99 140866 115/16"... $9.99 151279 18mm... $6.99 125943 2"........$10.99 151280 19mm... $6.99 125944 21/8"... $11.99 125931 3/4"........ $6.99 125945 21/4"....$14.99 151281 20mm.. $6.99 125946 23/8"....$15.99 125932 13/16"..... $6.99 125947 21/2"....$16.99 125933 7/8"........ $6.99 125948 25/8"...$16.99 125934 15/16"..... $6.99 125949 23/4"....$19.99 151282 25mm... $6.99 125950 27/8"....$19.99 125935 1".......... $6.99 125951 3"........$20.99 147884 11/16" ....$7.50 125952 31/8"....$22.99 125936 11/8" . ....$7.50 125953 31/4"....$23.99 147997 30mm .$6.99 125954 31/2"....$24.99 125937 11/4" . ....$7.99 142511 35mm carbide tipped.................. $21.99 142512 40mm carbide tipped...................$25.99

A radical new design that features razor sharp, wave-form cutting teeth that work cooler, require less power and produce less friction. This results in more efficient cutting with an improved finish from a bit that can stay sharp longer than any Forstner bit on the market. Side clearance on the bit provides tear free and accurate holes in both soft and hardwoods. Overall length for all bits is 31/2". Shank size is 5/16" on bits 5/8" - 13/16" and 3/8" on bits 11/4" - 21/4". Set of 5 contains 5/8", 3/4", 1", 11/8" & 13/8" in a wooden box. Set of 13 (no box) contains 5/8" - 21/8" in 1/8" increments. Made in Germany. 140014 boxed set of 5 Save $12! .......$132.99 143235 set of 13 Save $79! . .............. $439.99 129987 5/8"................................................. $19.99 129988 11/16"..............................................$24.99 129989 3/4".................................................$25.99 129990 13/16".............................................. $27.99 129991 7/8"................................................. $27.99 129992 15/16".............................................. $27.99 129993 1"...................................................$29.99 129994 11/16".............................................$29.99 129995 11/8"...............................................$29.99 129996 13/16".............................................$33.99 129997 11/4"...............................................$33.99 129998 13/8"...............................................$39.99 129999 35mm...........................................$39.99 140010 11/2"...............................................$44.99 142161 40mm...........................................$59.99 143219 15/8"...............................................$46.99 140011 13/4"...............................................$48.99 143221 17/8"...............................................$50.99 140013 2"...................................................$52.25 143220 21/8"...............................................$66.99 140012 21/4"............................................... $74.99

Drill Guide

Drill perpendicular holes on flat surfaces, board edges, cylinders, even spheres! Set includes 3/16", 1/4", 5/ ", 3/ ", 7/ " and 1/ " diameter hardened steel 16 8 16 2 bushings. Also includes a center punch/locator pin, and easy-to-follow instructions. 140876 ....................................................... $14.99

Drill Bit Stop Collars

These stop collars are of the "split-ring" design, which positively lock anywhere along the bit diameter. They work on both standard and brad point bits. Unlike setscrew type collars that may skew or damage the bit, these units will not move after tightening. The 7-piece set includes a hex key and 1 each of the following sizes: 1/8", 3/16", 1/4", 5/16", 3/ ", 7/ ", and 1/ ". 8 16 2 142562 ......................................................... $9.99

Helping You Make Wood Work ®

59


Woodboring

COLT MaxiCut Forstner Bit System

The German made COLT MaxiCut is a totally new cutting head design that combines the advantages of a forstner bit with those of a boring bit while the high performance RotaStop shank provides optimum torque. The sectioned cutting rim produces less heat for considerably longer tool life. The saw tooth effect of both cutting cam pairs on the circular cutting edge offers a noticeably easier and faster boring tool. The chip breaking grooves on the internal cutting edges of 3/4" and larger bits guarantees smoother drilling and easier swarf removal. These bits are suitable for half, inclined, overlapping and deep bore holes. The polygonal shape of the RotaStop shank ensures optimum transmission of the torque and practically chucks itself automatically by means of the rising contours. The result is no slipping in the chuck and precise results when machining the hardest of materials. Combining the Morse-Taper adapters and extensions allows easy tool changing within seconds and longer service lives for the tools. 5-piece Set A contains sizes: 5/8", 3/4", 1", 11/8" and 13/8". 10-piece Set A contains sizes: 1/2", 5/8", 3/4", 7/ ", 1", 11/ ", 13/ ", 11/ ", 13/ " and 2". 10-piece Set 8 8 8 2 4 B contains sizes: 11/16", 13/16", 15/16", 11/16", 13/16", 11/4", 15/8", 17/8", 21/8" and 21/4". 844141 35mm............................................$34.99 844143 1/2" .................................................$26.99 844144 5/8".................................................. $27.50 844145 11/16" ..............................................$28.50 844146 3/4" . ............................................... $28.99 844147 13/16" ..............................................$29.50 844148 7/8" .................................................$29.99

10-piece Set B 844149 844150 844151 844152 844153 844154 844155 844156 844157 844158 844159 844160 844161 844162 844142 844163 844164 844165 844166 844167 844168 844169 844170

15/ " 16

..............................................$30.99 1" ................................................... $31.50 11/16" ............................................. $31.99 11/8" . .............................................$32.50 13/16" .............................................$32.99 11/4" . .............................................$33.50 13/8" . .............................................$34.99 11/2" ..............................................$35.99 15/8"................................................ $37.50 13/4" . .............................................$39.50 17/8" ...............................................$40.99 2" ...................................................$42.99 21/8" . .............................................$44.99 21/4" . .............................................$46.99 MT1 adapter..................................$38.99 MT2 adapter.................................. $41.99 MT3 adapter.................................. $47.99 90mm extension...........................$25.99 150mm extension.........................$29.99 270mm extension.........................$33.99 5-pc. Set A....................................$124.99 10-pc. Set A................................. $294.99 10-pc. Set B (shown).................. $324.99

Maxi Cut Kit for pepper mills, includes 11/16" forstner bit, 150mm extension, #2MT adapter.................... 847141 .......................................................$89.99

MILLER Stepped Dowel System

The Miller dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, it’s easier to tap in and by inserting the dowel through the top board is simply that there is less chance for the pilot hole to be misaligned. The 1X dowels are 25/8" long and 3/8" at their largest diameter. The Mini X dowels are 15/8" long and 1/4" at their largest diameter for joining 1/­2" stock. Kits include a step bit and 50 dowels. Reduced shanks to fit any 3/8" or larger chuck. 144570 1X dowel kit................................... $27.99 827522 1X bit only......................................$18.99 827523 1X birch dowels (40)....................... $8.99 827524 1X cherry dowels (40)................... $12.99 827525 1X oak dowels (40)...................... $10.99 827526 1X walnut dowels (40)................. $13.99 827532 mini X dowel kit.............................$23.99 827533 mini X bit only................................ $10.99 827534 mini X birch dowels (100)............. $13.99 827535 mini X cherry dowels (100)........... $23.99 827536 mini X oak dowels (100)............... $16.99 827537 mini X walnut dowels (100).......... $24.99

D B

C

A

A A

PORTER-CABLE QUIK® JIG® Pocket Hole Jig

B

Circle Cutters

Designed for use in drill B presses for cutting clean holes from 1" to 7 7/8" in diameter up to 1" deep. High Speed Steel single wing cutters are easy to sharpen and set up. Center pilot bits keep the tools on center for exact results. Max. speed 500 RPM. (A) Large Circle Cutter for 13/4" to 77/8" diameter circles. Has 1/4" pilot bit and 1/2" diameter shank. 16N41 .....................................................$34.99 16N45 extra wing cutter........................... $9.99 (B) Small Circle Cutter for 1" - 6" diameter circles. Has 6mm pilot bit and stepped 3/8" - 1/2" diameter shank. 145072 ..................................................... $19.99 145230 extra wing cutter............................$7.99

60

C

D

Rosette Cutters

Make your own plinth blocks for perfectly matching door and window trim treatments! No matter what your project these carbide drill press cutters will produce clean, smooth cuts in most woods. Available in four patterns and two diameters with 1/2" shanks. 144997 (A) 21/8" dia. cutter......................$64.99 145001 (B) 21/8" dia. cutter......................$64.99 145002 (C) 21/8" dia. cutter......................$64.99 145003 (D) 21/8" dia. cutter......................$64.99 145004 (A) 23/4" dia. cutter...................... $76.99 145005 (B) 23/4" dia. cutter...................... $76.99 145006 (C) 23/4" dia. cutter...................... $76.99 145007 (D) 23/4" dia. cutter...................... $76.99

Credit Card Orders: 800 225-1153

The new QUIK JIG® from Porter-Cable eliminates time consuming set-up and calculations for wood boring operations. Simply set the stop collar on the drill bit, one time, and it is ready to go! The Depth Control System of the jig automatically sets the pocket hole location for different material thicknesses and the QUIK JIG® accommodates material thickness from 5/8" up to 13/8". With your material clamped in the jig, the screw length indicator shows you the length of fastener necessary and adjustable spacing between the pocket holes can be varied from 3/ " up to 13/ ". A repeatable clamp makes drilling 4 8 multiple pieces quick and easy. Includes a removable dust port/container that can be hooked up to a dust extractor or standard shop vacuum. Includes: QUIK JIG®, drill bit with collar, 6" clamp, 100 pocket hole screws, 6" square driver, 3" square driver and instruction manual. 847359 .................................................... $229.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodboring

WOODPECKERS® Self-Clamping Shelf Pin Jigs

COLT Extra-Long 9" Brad Point Bits

Commonly called “beam drills” in Europe, these high-quality German-made bits drill fast and have excellent chip clearance. Perfect for boring deep holes and drilling in hard-to-reach areas. Bits up to 3/ " have reduced shanks to fit 3/ " drill chucks, larger 4 8 than 3/4" have reduced shanks to fit 1/2" drill chucks. 146643 set of 8 Save Over $22..............$99.99

146635 146636 146637 146638 146639 146640 146641 146642

1 / ".................................................... $9.99 4 5/ "................................................$10.99 16 3/ "................................................ $11.99 8 7/ "................................................$13.99 16 1 / ".................................................$14.99 2 9/ "................................................$15.99 16 5/ "................................................ $21.99 8 3/ "..................................................$23.99 4

COLT Twinland Brad Point Bits

Want to drill faster, cleaner holes with a longer lasting bit? Manufactured in Germany to the highest standards, these radical new bits feature a patented Twinland 25° flute design. The Twinland design improves guidance and accuracy, and provides accelerated chip clearance. Faster chip clearance means less heat, cleaner holes, and longer bit life. Like us, you’ll be amazed at how much better these tool steel bits perform when run side-by-side with traditional bradpoint bits. Bits up to 3/4" have reduced shanks to fit 3/8" drill chucks, larger than 3/4" have reduced shanks to fit 1/2" drill chucks. Set of 7 Fractional Brad Point Bits includes 1/8", 3/ ", 1/ ", 5/ ", 3/ ", 7/ ", and 1/ " sizes. 16 4 16 8 16 2 146645 set of 7 Save Over $7.................. $19.99 Set of 4 Large Fractional Brad Point Bits includes 5/ ", 3/ ", 7/ ", and 1" sizes. 8 4 8 146644 set of 4 Save Over $10...............$59.89 Individual Fractional Bits. 146646 1/8"...... $2.99 146654 3/8"...... $3.75 146647 5/32".... $2.99 146655 7/16"..... $4.50 146648 3/16".... $2.99 146656 1/2"...... $6.99 146649 7/32"..... $2.99 146657 9/16"......$7.99 146650 1/4"...... $2.99 146658 5/8"...... $8.99 146651 9/32"....$3.50 146659 3/4"....$15.99 146652 5/16".....$3.50 146660 7/8"....$19.99 146653 11/32"... $3.99 146661 1"......$24.99

Whether you want to use your router, a self-centering bit or even a standard brad point bit using the optional Drill Guide, the Woodpeckers Self-Clamping Shelf Pin Jig does it all! Two rails are counter bored from one side to house self-centering drill bits or flip each rail over and use any 3/8" O.D. template guide bushing with a plunge router. Stops are provided at each end of the outer rails for infinite adjustment of offset from the edge of the board. A third floating rail supports your router and keeps it from tipping during plunge boring use. The clamping mechanism elevates the board above the workbench and clamps evenly from both edges to prevent cupping on boards up to 14" wide. Two different versions are available with standard 1" center-to-center spacing or popular 32mm. Optional Drill Guides utilize your common brad point bit as an economical shelf pin drilling solution. 151004 32mm spacing shelf pin jig........$129.99 151005 1" spacing shelf pin jig................$129.99

WOODPECKERS® Drill Guides For Shelf Pin Jigs

Set of 7 Metric Brad Point Bits includes 4, 5, 6, 7, 8, 10, and 12mm sizes 146611 set of 7 Save Over $10...................$19.99 Individual Metric Brad Point Bits. 146612 3mm... $2.99 146624 15mm.... $7.99 146613 4mm... $2.99 146625 16mm.... $7.99 146614 5mm... $2.99 146626 17mm .$11.99 146615 6mm... $3.99 146627 18mm. $12.99 146616 7mm.... $3.99 146628 19mm. $13.99 146617 8mm... $4.99 146629 20mm .$14.99 146618 9mm... $4.99 146630 22mm .$15.99 146619 10mm .$4.99 146631 24mm .$16.99 146620 11mm .$5.99 146632 26mm .$17.99 146621 12mm .$6.99 146633 28mm .$18.99 146622 13mm. $6.99 146634 30mm .$19.99 146623 14mm. $6.99

Use your brad point bits to bore shelf pin holes utilizing most shelf pin jigs and templates with 3/8" diameter holes for indexing. Three steel guides in an anodized aluminum housing have 1/4" projected length on one side, 1/2" projected length on the other or 3/ " projected length on one side and flush steel 4 guide on the other. Choose the inside diameter that matches your shelf pin diameter. 1/4" Drill Guides use standard 1" center-to-center spacing while 5mm I.D. Guides use the popular 32mm spacing. 151082 1/4" ID x 1/4" PL x 1" C/C ...............$24.99 151083 1/4" ID x 3/4" PL x 1" C/C ...............$24.99 151084 5mm ID x 1/4" PL x 32mm C/C .....$24.99 151085 5mm ID x 3/4" PL x 32mm C/C......$24.99

Woodthreading Kits

This threadbox and tap, for cutting external and internal threads in wood, is useful for making clamps, jigs, fixtures, knockdown furniture, toys, and novelties. Although traditional in design, modern technology and metallurgical advances have improved the traditional threadbox and tap and perfected its components. Hardwood threadbox with turned handles has an aluminum insert to prevent wear and extend the tool life. Steel tap is machined to close tolerances and designed to allow easy chip clearance. The resulting wood thread is both tight fitting and strong. Available in five sizes. Includes threadbox, tap and instructions. 12T13 1/2" diameter x 8 TPI......................$39.99 12T14 3/4" diameter x 6 TPI.....................$36.99 12T15 1" diameter x 6 TPI........................$39.99 12T16 11/4" diameter x 6TPI.................... $41.99 12T17 11/2" diameter x 6 TPI...................$43.50 12T18 replacement cutter.......................$10.50

DOWELMAX Precision Engineered Wood Joinery System

Bottoming taps for cutting threads to the bottom of a blind hole. Use it after a regular tap. 12T19 1/2" bottoming tap......................... $16.99 12T25 3/4" bottoming tap.........................$18.99 12T26 1" bottoming tap........................... $19.99 12T27 11/4" bottoming tap.......................$20.99 12T28 11/2" bottoming tap.......................$20.99

TOGETHER, WE CAN CREATE ANYTHING TM

Create strong, accurate wood joints of virtually any configuration and size. Dowelmax joint configurations and sizes can be single, double and triple row, flush, offset, mitered, and face joints, from 1" x 1" to 1" x 12" and from 2" x 2" to 4" x 12" The patented design, coupled with rigorously maintained manufacturing tolerances of the numerous aluminum, brass and steel components, ensures that the Dowelmax is accurate and repeatable from workpiece to workpiece. The Dowelmax Kit is a professional quality, precision engineered joining system that is intended to last a lifetime. The main body of the jig is polished 6160 aluminum and the drill guide material is carbo-nitride hardened and black oxide coated steel. All Dowelmax components are manufactured and assembled in North America. 412425 Dowelmax joinery system.......... $309.99 412428 repl. 3/8" drill bit & collar............... $16.50 412426 1/4" drill guide set.......................... $79.99 412427 1/8" spacer plate............................$12.50

Helping You Make Wood Work ®

61


Woodboring A

B A WoodRiver®

Shelf Pin Jigs

B

Drill shelf pin holes for adjustable shelving in cabinets, bookshelves or AV furniture. The jig’s 3/ " guide holes align most self-centering boring 8 bits. Standard jig has 1" spacing and can be offset either 11/2" or 21/2" from edge. Metric jig has 32mm spacing and can be offset either 37mm or 50mm from edge. Includes special pin to index the jig for longer length projects. The 1/4" and 5mm shelf pin bits, sold separately, produce crisp holes with little tear-out and can be used with either jig. 150720 13-hole metric pin jig (shown).......$17.99 150721 15-hole standard shelf pin jig........$17.99 150722 (A) 1/4" drill bit................................ $14.99 150723 (B) 5mm drill bit............................. $14.99

WOODPECKERS® Shelf Pin Drilling Template

Woodpeckers Combo Shelf Pin Template combines holes of both inch and metric spacing to work with self-centering drills bits, router guide bushings and even plain drill bits using the optional drill guide. CNC machined from 3/8" thick phenolic sheet with twenty-one holes on 1" spacing. Choose 11/2", 2" or 21/2" offset from edge on one side and fifteen holes on 32mm spacing with euro standard 37mm offset from edge on the other side. 3/8" diameter holes are compatible with most self-centering shelf pin bits and 3/8" OD router guide bushings for plunge boring. Includes three each 1/4" and 5mm Index Pins for setting offset and for continuous boring of long panels. Optional Woodpeckers Drill Guide utilizes your standard brad point drill bits. 151136 combo shelf pin template............$49.99 151138 1/4" index pins (3).......................... $14.99 151137 5mm index pins (3)....................... $14.99 151082 1/4" ID 1” OC Drill Guide................$24.99 151084 5mm ID 32mm OC Drill Guide.....$24.99 830812 1/4" Snappy bit...............................$26.99 148011 5mm Snappy bit............................$26.99 148156 3/8" OD Whiteside guide bushing.$15.99 03K33 1/4" Whiteside up-cut bit............... $19.99 148048 5mm Whiteside up-cut bit............$21.99

Stanley “Sweet Heart” Hand Planes

C

“A Stanley Tradition since 1843”. With this opening quote, Stanley reintroduces their Sweet Heart logo with a new line of premium hand planes. If you’re a woodworker, finding an old Stanley tool with their Sweet Heart logo is like finding a treasure, and many consider these hand planes to be the best of the best. These new planes were created with the input of users and engineers – combining science and the art of tool making to produce the best possible tool. Each plane features an adjustable mouth, a 1­/8" thick A2 steel blade, a one-piece precision-ground frog and base casting, and a limited lifetime warranty. Instructions for care and use included. Stanley S.W. Block Planes The 60 1/2 S.W. Low Angle Block Plane and 91/2 S.W. Block Plane feature a 21/8" wide x 61/2" ductile iron base with a 13/4" wide blade. At 2, and 2.3 lbs. respectively, both might be a tad heavy for the tool belt but the extra mass comes in handy when edge planing or doing any cross-grain work. 149859 (A) 91/2 S.W. Block ........................$99.99 149860 (B) 601/2 S.W. Low Angle...............$99.99

A

W NEW LO ! S E IC PR

Stanley No. 4 S.W. Bench Plane Generally referred to as a smoothing plane, Stanley’s No. 4 is 21/2" wide x 10" long with a 2" wide blade and at nearly 5 lbs. is the perfect size for that final surface smoothing prior to applying the finish. There is also a lateral adjustment lock to ensure cut accuracy. Front knob and tote are genuine American cherry. 149861 (C) No. 4.......................................$179.99 Stanley No. 62 S.W. Low Angle Jack Plane The Stanley No. 62 is 21/2" wide x 14" long with a 2" wide blade that’s installed bevel up without a cap iron. Jack planes with bevel up irons are among the most useful planes because they can be used in place of a jointer plane on short boards, and for smoothing. The front knob and tote are genuine American cherry. 149862 (D) No. 62.....................................$179.99

B

D

C

E GRÖZ Bench Planes

These imported bench planes are manufactured to exacting standards. Frogs are well machined and adjustable for control of the throat opening, depth adjustment knob is brass, and hardwood handles and knobs have a hand-rubbed finish. All have high carbon steel irons and lever caps are chrome plated for added protection. The #3 houses a 13/4" wide iron, while the #4 and #5 have 2" wide irons; the

Self-Centering Doweling Jigs

Guaranteed Accuracy And Alignment! B A The patented automatic self-centering action of these jigs assures accurate center drilling every time, even on round objects. Large steel clamping screw tightens the tool like a vise, with rugged aluminum sides holding work securely without damage to the wood. Large 2" to 27/16" capacity on all models will handle most size requirements. Drill guide centers are hardened, guide holes are precision drilled and reamed for extreme accuracy. Wide Capacity Economy Jig. Similar to above, but (A) Economy Doweling Jig has five permanent drill with a capacity of up to 6" wide. Perfect for face work 1 5 3 7 1 hole sizes: /4", /16", /8", /16", and /2". on 2x4 & 2x6 stock, even works with 4x4’s & 6x6’s. 811564 ....................................................... $51.99 821330 ...................................................... $65.99

62

D

Credit Card Orders: 800 225-1153

#6 and #7 have a 23/8" wide iron. 147636 (A) #3 smooth, 9"......................... $32.99 145974 (B) #4 smooth, 10"........................$29.99 145975 (C) #5 jack, 14"............................. $54.99 148670 (D) #6 fore, 18"..............................$76.99 148760 (E) #7 jointer, 22"...........................$89.99 (B) Deluxe Doweling Jig features two permanent drill hole sizes: 7/16" and 1/2" and six removable screw-in bushings for extra hole patterns. Bushing sizes are 1/ ", 5/ ", 3/ " (two of each). Allows drilling of two holes 4 16 8 of the same size parallel to one another for double dowel applications on a 3/4" center to center space. 811565 ...................................................... $56.99 Premium Doweling Jig (not pictured) is similar to the Deluxe model above, except all four holes are tapped for bushing use. Includes 1/4", 5/16" and 3/8" bushings (two of each). 124315 ...................................................... $62.99 Additional Bushing Set for the Deluxe and Premium models include one each of the 1/4", 5/16" and 3/ " bushings. 8 811615 ......................................................... $9.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Planes C PROFESSIONAL QUALITY TOOLS

A

PINNACLE®® Plane Blades

B

WoodRiver® V3 Bench Planes

Introducing the New and Improved Version 3 WoodRiver® Bench Planes. Our new Version 3 bench planes are still based on the reliable Bedrock design and feature heavy, stress- relieved, ductile iron castings, fully machined adjustable frogs and A-2 blades but we took the opportunity between manufacturing runs to conduct a critical review and incorporate a few improvements. We’ve changed the shape of the rear tote for a more comfortable grip and increased the diameter of the blade adjustment wheel for easier blade advancement. A more robust lateral adjustment lever, with a traditional style bearing provide better blade control and improved castings result in better “feedback” to the user. Working closely with the manufacturer, we’ve continued to make improvements in machining, finish and functionality to produce hand planes that are meant to be used and offer an extraordinary value. No. 3 Slightly smaller and lighter than the No 4, this plane is well suited for smoothing smaller surfaces, or maneuvering around troublesome grain. Slightly longer than a block plane, the tote makes it more comfortable for extended use. The 95/16" long x 21/4" plane partners perfectly with the longer No. 5. Wt. 41/2 lbs. 150873 (A).................................................$114.99 No. 4 A versatile tool, the No. 4 ideal for smoothing and other light jobs where you don’t need the length

D or heft of a larger plane. Weighing in at 5 lbs., this 97/8" long x 27/16" wide, this plane is light enough to use for longer periods, but has plenty of heft to slice through difficult grain without stopping. 150874 (B).................................................$119.99 No. 5 An all-purpose plane, the No. 5, or jack, plane can perform most planing tasks, while providing you with experience and feed back to help you pick your next plane. Nearly a full 14" in length with a 27/16" sole, this 6 lb. No. 5 is useful for stock removal, smoothing, shooting miters, and jointing smaller work. 150875 (C).................................................$134.99 No. 6 The No. 6, also called a “fore” plane is good for jointing edges and flattening and smoothing large surfaces, such as table tops, panels and workbench tops, where you might not want or need the length or weight of a larger plane. The 173/4" long x nearly 27/8" wide sole enables it to shave bumps and bridge over valleys 7/8" wide better than a shorter plane. Weighing in at a stout 73/4 lbs., this plane’s additional heft makes it easier for you to shave difficult stock without breaking a sweat. 150876 (D).................................................$154.99

The WoodRiver® shave is a robust casting of ductile iron featuring a high carbon RC60-64 blade and an adjustable front shoe to control the depth of cut.

The heavy (1.05 lbs.) cast iron body actually increases tool control, making it easier to shave with one or two hands. This, combined with the adjustable shoe for depth control will make this one of your favorite hand tools. 150740 (E)...................................................$49.99

Replacement Plane Blades For Veritas®® Style

Replacement Blades For Stanley/Record Style

WoodRiver®

Spokeshave

Compatible with the Veritas® planes below. All blades are A-2, Rc 60-62 unless noted. 0-1 blades are Rc 58-60. 150007 bevel up jointer...........................$39.99 150008 bevel up jointer, toothed............$49.99 150009 #4, 51/4....................................... $44.99 150010 #6, 41/2....................................... $56.99 150011 scrub........................................... $42.99 150012 DX/NX60.................................... $32.99 150013 low-angle smooth...................... $32.99 150014 low-angle smooth toothed......... $37.99 150015 low-angle block.......................... $32.99 150016 low-angle block toothed............ $37.99 150017 apron...........................................$23.99 150018 apron toothed............................ $32.99 150023 iron edge trimming.....................$24.99 150024 bronze edge trimming................$24.99 150025 flush plane..................................$19.99 150026 large shoulder............................ $41.99 150027 medium shoulder...................... $35.99 150028 bullnose.......................................$39.99 150029 side rabbet, left, O-1................. $11.99 150030 side rabbet, right, O-1............... $11.99 150032 skew rabbet, left........................ $36.99 150031 skew rabbet, right..................... $36.99

Upgrade your antique tools with these blades that have been designed for the Stanley tools listed below. All blades are A-2, Rc 6062, and a hefty 0.095" thick. 150592 Stanley/Record #3, #51/4..........$49.99 150047 Stanley/Record #4, #5............. $45.99 150048 Stanley/Record #41/2, #6, #7... $55.99 150049 Stanley/Record #8.....................$60.99 150050 Stanley #10, #101/4, #101/2 ..... $62.99 150051 Stanley #51/2. ............................ $55.99 150052 Stanley #91/2 block, 3-slot.........$40.99 150053 Stanley #91/2 block, 11-slot.......$40.99 150054 Stanley #601/2 block, 3-slot......$40.99 150055 Stanley #601/2 block, 11-slot.....$40.99 150056 Stanley #140 block....................$49.99 150057 Stanley #62 block...................... $45.99 150058 Stanley #97 large chisel............$40.99 150035 Stanley #51/52 spokeshave.... $18.99 150590 Stanley #1...................................$44.99 150591 Stanley #2...................................$49.99 150593 Stanley #102 block.....................$39.99 150594 Stanley #103 block.....................$44.99 150600 Stanley #112...............................$49.99

Working together with renowned blade manufacturer, IBC, Woodcraft is proud to introduce the new line of Pinnacle® plane blades. The evidence of IBC’s plane blade manufacturing expertise is extensive, but its name is still vastly unknown to woodworkers. Woodcraft is proud to finally, and formally, introduce IBC to the woodworking world. Instead of being the best-kept secret in woodworking industry, the goal of the IBC brand is to become synonymous with “the best plane irons in woodworking”. Match these blades against any other manufacturer… you will not regret it. You won’t need to examine the factory edge under a microscope to see that these blades are superior, you’ll feel it the first time you use one! All blades 100% Made in Canada. • Honed Razor-Sharp – No Honing Required! “Will Shave Hair Out Of The Box” • A-2 Tool Steel, unless noted • Double Tempered to 60-62 Rc, unless noted • Fully Stress-Relieved • Air Hardened • Cryogenically Treated • Fully Demagnetized • Precision Ground Top/Bottom • Precision Ground/Hand-Polished Sides • Micro-thin Film, Water Soluble Rust Inhibitor With Rust Inhibitor Paper Wrap If you need assistance selecting the proper blade for your tool, contact our Technical Service Department, 800 535-4486

Replacement Plane Blades For Lie-Nielsen®® Style

Previously available only as original manufacturers equipment, these planes blades were designed for and are 100% compatible with the Lie-Nielsen planes below. All blades below are A-2, Rc 60-62. 150059 #1................................................ $35.99 150060 #2................................................ $35.99 150061 #3, 51/4........................................$39.99 150062 #4, 5.............................................$39.99 150063 #41/2, 51/2, 6, 7 jointer.................$50.99 150065 #8 jointer.................................... $55.99 150066 #101/4 bench rabbet................. $56.99 150067 low-angle #102/103 block........$30.99 150068 adjustable-mouth block............ $35.99 150069 rabbet block................................$40.99 150070 low-angle smoothing..................$40.99 150071 low-angle jack.............................$40.99 150072 low-angle jointer........................ $55.99 150073 small scraping............................$25.99 150074 large scraping.............................$40.99 150075 cabinetmaker’s scraper.............$40.99 150076 1/2 inch shoulder........................ $35.99 150077 small shoulder........................... $35.99 150078 medium shoulder...................... $35.99 150079 large shoulder............................ $44.99 150609 #102, #103 block....................... $61.99 150614 #164 smoothing..........................$49.99 150615 #164 smoothing, toothed..........$80.99 150610 #140 right skew.......................... $51.99 150616 iron mitre.....................................$49.99 150617 #62 la jack 90°..........................$49.99 150623 #97 large chisel...........................$49.99 150624 #971/2 small chisel......................$44.99 150626 #401/2 scrub................................$39.99 150632 #112 lg. scraper toothed 18tpi . $74.99 150633 #112 lg. scraper toothed 25tpi . $74.99

Helping You Make Wood Work ®

63


Planes

PINNACLE®/IBC Matched Chip Breaker & Blade Set For Stanley Style Bench Planes

Revive your Antique Stanley/ Bailey hand plane with these premium Blade and Chipbreaker Sets. Premier quality A-2 Pinnacle/ IBC blades have been matched with an innovative chipbreaker design that can give your plane performance that rivals modern high end tools. These replacement sets are over 65% thicker than the original equipment and are matchground and serialized at the time of manufacture. Hardened O-1 Chipbreaker with precision ground edge provides superior support for the blade. These features provide for a heavier and stiffer blade which reduces vibration and chatter, leading to improved perA formance. Exclusively designed Chipbreaker Blade Adjustment Tabs (A) allow thicker premium blades/chipbreakers to function in antique planes. Minor modification may be required to the plane’s mouth opening to accommodate this blade. Made in Canada. For a limited time, each set includes “The Great Hand Plane Revival with Rob Cosman” DVD, taking you through 11/2 hours of complete hand plane tune up information. $32.50 Value. 150812 13/4" W for #3 & #51/4..................$99.99 150813 2" W for #4 & #5...........................$99.99 150814 23/8" W for #41/2, #51/2 #6 & #7.$104.99 150791 The Great Hand Plane Revival . .............. DVD................................................$32.50

PROFESSIONAL QUALITY TOOLS

PINNACLE®/IBC Matched Chip Breaker & Blade Sets For Lie-Nielsen® & Veritas® Style Bench Planes

Performance begins with the blade. IBC blades are the best kept secret in the industry and as they continue their quest for perfection, they realized that better blades deserved a better chipbreaker. The innovation starts with design and materials: O-1 Steel is hardened to 30-32HRc then precision machined and sharpened to provide a durable, perfectly-mating edge that fully supports the blade. This greatly reduces vibration and chatter which leads to a finer, consistent shaving. Each chipbreaker is matched - ground and serialized to its blade at the time manufacture for a perfect match. The sides are precision ground and hand polished to a beautiful finish. Made in Canada. PINNACLE®/IBC for Lie-Nielsen Style 150893 13/4" W for #3, #51/4..................... $74.99 150894 2" W for #4 & #5.......................... $74.99 150895 23/8" W for #41/2 ½, #51/2 ½, #6 & #7.$89.99 PINNACLE®/ IBC for Veritas Style 150891 2" W for #4 and #5....................... $79.99 150892 23/8" W for #41/2½............................$99.99

PINNACLE®/IBC Replacement Spokeshave & Scraper Blades For Veritas®® Style

Scraper blades are High Carbon Steel, Rc 48-51 unless noted. All other blades are A-2, Rc 60-62. Chair Devil set includes 1/2", 7/8" and 11/4" radius blades. Chairmaker’s set includes 1/2", 7/8" and 11/4" concave; and 11/2" convex blades. 150019 scraping, A-2............................... $32.99 150020 scraping HCS...............................$14.99 150021 scraping toothed, A-2................. $43.99 150022 small scraping, HCS................... $11.99 150033 large spokeshave........................$24.99 150034 pullshave......................................$29.99 150036 flat spokeshave.......................... $21.99 150037 concave spokeshave................... $27.99 150038 low-angle spokeshave.................$19.99 150040 magnetic corner chisel.............. $32.99 150043 chair devil, set of 3, HCS........... $35.99 150044 scraper shave, HCS....................... $9.99 150045 4-pc. chairmaker’s scraper, HCS.$30.99 150046 chairmaker’s scraper, straight blade.... HCS.................................................$8.99

KUNZ Spokeshaves

(A) Half-Round Spokeshave with a concave face blade for easy A shaving of round stock. Length 10", B blade width 21/16". Honing is required before use. 16B02 ....................................................... $27.99 16G13 replacement blade.......................... $9.99 (B) Radius Spokeshave. Sole and blade are ground to a 2" radius for smoothing concave surfaces. Length 10", blade width 21/16". Honing required before use. 01T11 ....................................................... $27.99 01T12 replacement blade.......................... $9.99

STANLEY Spokeshaves

Adjustable blade spokeshaves are made of durable malleable iron with two adjusting screws for vertical and lateral blade adjustments. The flat face trims flat and round stock while the curved face cuts a concave surface. Over lengths 10”, blade widths 2”. Honing required before use. 827102 flat face......................................... $31.99 827103 round face.................................... $31.99

64

HOCK Blades And Chipbreakers

Handmade and 17% thicker than standard blades, allowing closer throat-opening settings, finer shavings, and reduced chatter. High carbon (.95%) tool steel and hardened to Rc62, they hold a razor-sharp edge. Fits Stanley, Bailey, Record, Footprint, and most other planes. 3/32" thick, USA, honing required before use. Bench Plane Blades are 7" long. 04B21 13/4" blade.....................................$35.50 04B22 2" blade.......................................... $37.50 04B23 2 3/8" blade.....................................$40.99 04B25 2 5/8" blade.....................................$45.99 Block Plane Blades are 41/2" long with rear depth adjustment grooves. Wide-slot blades only fit the new Stanley block planes. 04B34 13/8" blade.................................... $35.99 04B35 15/8" blade..................................... $37.99 04B36 13/8" wide-slot blade.................... $34.99 04B37 15/8" wide-slot blade.................... $35.99 Spokeshave Blade is 17/8" long. 04B33 21/8" blade.....................................$30.99 HOCK Chipbreakers. Upgrading your plane with a Hock Blade? Add one of their Chipbreakers for the ultimate plane blade tune-up! Most standard chipbreakers are only .065 to .070" thick – too thin to add much strength. Hock Chipbreakers are .118" (3mm) thick for added mass, rigidity and support for the cutting edge. 144182 13/4" chipbreaker........................ $32.99 144183 2" chipbreaker............................ $32.99 144184 23/8" chipbreaker........................ $32.99

Credit Card Orders: 800 225-1153

HOCK A2 Cryogenically Treated Blades

Cryogenically treated blades let you use your plane more and sharpen less! The tool steel known as A2 has a great reputation for its superior edge holding properties. Renowned blade maker Ron Hock has gone one step further to cryogenically treat A2 blades. This extreme cold treatment (-320°F) increases the steel’s toughness without any decrease in hardness. You get improved wear resistance without any increase in brittleness, so a Cryogenically treated blade will hold its edge longer. What does all this mean to you? Simply, that you can keep working instead of sharpening! Fits Stanley, Bailey, Record, Footprint, and most other planes. Honing required before use. Bench Plane Blades 142441 13/4" blade..................................... $47.00 142442 2" blade..........................................$48.00 142443 23/8" blade.....................................$49.00 142444 25/8" blade.....................................$50.00 Block Plane Blades are 41/2" long with rear depth adjustment grooves. Wide slot blades only fit the new Stanley block planes. 142445 13/8" blade.....................................$45.00 142446 15/8" blade..................................... $47.00 142447 13/8" wide slot blade.....................$45.00 142448 15/8" wide slot blade..................... $47.00 Spokeshave Blade is 17/8" long. 142494 21/8" blade.....................................$40.00

Free Technical Advice: 800 535-4486

www.woodcraft.com


Timber Framing

STANLEY Block Planes

These versatile planes feature newly designed lateral iron adjustment levers, adjustable mouth, brass knobs, heavy body castings, accurately ground surfaces, and black enamel finish. Body length A 61/4". Replacement blades fit these new planes only (not for old Stanley models). Honing required before use. (A) STANLEY Block Plane No. 91/2 for general repairs & finish planing. 15/8" wide iron is set at 21°. 17S62 .............................................................................$44.99 (B) STANLEY Block Plane No. 601/2 with low 12° angle. Blade B cleanly cuts end grain, interlocking grain, or any problem stock. 3 Iron width 1 /8". 17W42 ................................................................................................................................................... $44.99

STANLEY Rabbet Planes

C (A) Bullnose Rabbet Plane No. 90. Sides are ground flat and at a right angle to the bottom. Mouth adjusts for coarse or fine B work, and the entire top can be removed for conversion to a chisel plane. The 4" long body is A nickel-plated to prevent rusting. 1" cutter requires honing before use. UK. 02G20 . ................................................... $112.99 02G21 replacement iron............................ $19.50 (C) Rabbet Plane No. 92 is a larger version of the No. 90. The longer body aids in finer cutting action (B) Rabbet Plane No. 93 is similar to the No. 92, and control. It has an adjustable mouth and it can 1 except for size. Body is 6 /2" long, cutter 1" wide. be made into a chisel plane. 51/2" long, cutter width 3/ ". Honing required before use. UK. Honing required before use. UK. 4 02G40 . ..................................................... $129.99 02G30 . ..................................................... $124.99 02G21 replacement iron............................ $19.50 02G31 replacement iron............................ $14.99 GRÖZ Block Planes

One of the handiest tools in the shop, a block plane is commonly used to break sharp edges, trim and fit joints and clean up end cuts. Our Gröz planes feature heavy cast iron bodies, accurately ground surfaces, lateral adjustment levers, and black enamel finish. The Low Angle Plane has a 13/8" iron set at 12° and an adjustable throat. The Standard Plane has a 15/8" iron set at 21°. Body length of both is 7". Honing required before use. 146074 low angle block plane................. $31.99 146075 standard block plane .................$30.29

GRÖZ Duplex Rabbet Plane

Patterned after the Record 078, this plane is used to make rabbets with or across the grain. For clean cuts, this plane is furnished with a round nicker, or cutting spur, for scoring the grain ahead of the blade in cross grain cuts. The 3/32" thick blade is lever adjusted in the rabbet position, and can be repositioned on the front end of the plane for bullnose work. An adjustable depth stop can be positioned for a depth of cut up to 1/2" and the single post fence can be installed on either side. 11/2" wide blade, 81/2" sole, 10" overall length. 148671 . ........................................................$79.99

WoodRiver® No. 80 Cabinet Scraper

Produces a glass smooth finish on straight grained as well as highly figured woods. Thumbscrew adjustment can be set to cut a fine shaving or tightened to produce a coarse cut. Sole is 84mm (31/4") x 68mm (25/8"). 149157 . .......................................................$29.99

Shingle Froe

This is the tool used by colonial settlers to split shingles, shakes, and lumber for homes in early America. Today the shingle froe is still a primary tool in many traditional woodworking projects which require riving, like Windsor chair spindles and spoons. Simply pound the blade of the froe into the end of a short log with a mallet or maul, then pull back on the handle to split off a slice of the wood with the grain. Handle is 18" long; blade is 15" long and 2" deep. Roughly finished. Made in USA. 147901 . ........................................................$49.99

COUNT ON US FROM START TO FINISH TM

Timber And Log Saws

One Man Crosscut Saw. Perfect for timber framing, log building, or any heavy cutting job. Use the starting teeth to introduce a kerf, then the 3 TPI main teeth, which cut on both the push and pull stroke, to quickly slice through the toughest jobs. This heavy duty, hand hammered German saw has a 32" blade. 03P52 . ........................................................ $76.99

Dual Blade Tenon Cutters

Faster Cutting, Safer To Use And Longer Lasting! With our new cutters you’ll consistently cut accurate tenons. The dual precision-ground blades cut twice as fast, retain their sharpness longer, never rust or clog, and generate less heat for long-lasting service. The “In-Sight” measurement system has slots and radial grooves set at 1 /2" intervals – so you can eliminate manual re-measuring and re-cutting. Blades are made of rust-proof, hardened carbon steel. Self-centering design produces perfectly shaped tenons every time. Body is CNC machined from solid 6061 aircraft aluminum for maximum strength with minimum weight while 1/2" shanks are made of 303 stainless steel. For use on limbs up to 31/2" in dia. 147363 1/2" tenon diameter......................$94.99 147364 3/4" tenon diameter................... $134.99 147365 1" tenon diameter..................... $144.99 147366 11/2" tenon diameter................. $164.99 147367 2" tenon diameter..................... $184.99 147368 blade sharpener...........................$39.99

Framers 2" Chisel And Holster Set

We’ve taken our most popular timber framing socket chisel and combined it with a rugged canvas holster especially made to protect it. Holster is reinforced with a thick cotton webbing liner and extra tip pad to prevent cutting through. 03L73 2" chisel......................................$136.99 03L61 holster........................................... $20.99 03M30 2-piece set Save Over $22!.....$134.99

Two Man Crosscut Saw. Whether you’re building a timber frame home or cutting a few pieces of firewood, this saw will make short work of slicing through the toughest wood. The 4 ft. German blade is hand sharpened and set, ready to take on the heaviest cutting jobs. Overall length 52" with 81/2" hardwood handles. 144795 . .......................................................$92.50

Helping You Make Wood Work ®

65


Chisels

WOODCRAFT Socket Firmer Chisels

These heavy duty chisels have thicker and longer sockets for added durability. Forged from a solid piece of high carbon alloy tool steel then carefully hardened and tempered for extended edge sharpness. The best chisels available for timber framing and other demanding cutting jobs. Blade lengths are 7" to 8"; overall lengths 15" to 17"; with a sturdy ash handle with steel ferrule. Set of four includes 3/4", 1", 11/2", and 2". Honing required before use. 04M60 set of 4 Save Over $65! ..........$409.99 03L33 1/2"................................................$104.99 03L44 3/4"................................................$104.99 03L45 1".................................................. $109.99 03L72 11/2"..............................................$131.50 03L73 2"..................................................$136.99 Replacement Socket Chisel Handles 03F52 1/2", 3/4" and 1".............................. $13.99 03F72 11/2" and 2".................................... $14.99

BARR Timber Framing Chisels

Barr Quarton has been working with tool steel for over 18 years, and has applied his knowledge and skill to making the finest hand forged, individually tempered, woodworking tools available. In a day and age where most tools are drop forged, stamped or cut out and then poorly tempered, a majority of people have never had the pleasure of using a hand forged tool. Hammer forging packs the steel producing a very fine-grained, dense metal. This process also introduces more carbon into a smaller area. As a result you get a blade with remarkable edge holding ability without being brittle. Chisels feature fitted socket handles, steel ferrules, and are delivered shaving sharp! 145009 2" framing chisel ........................$129.99 145010 11/2" framing chisel.................... $129.00 145008 11/2", #5 sweep gouge..................$94.99 149506 25/8" large slick...........................$166.00 Leather Tip Guards and Holster. Made from heavy saddle grade leather and hand stitched. Both the tip guards and holster are furnished with an ABS plastic insert to protect the leather and the tool. 145011 leather chisel tip guard................. $19.99 145012 leather chisel holster....................$34.99

SORBY Cabinetmaker’s Bench Chisels

Feature classic octagonal boxwood handles – the old favorites of yesteryear’s discerning craftsmen. The unique “London pattern” of handle with turned finger contours, flat milled body, and graduated sizing, promotes a more positive and natural grip for controlling your cuts. Fitted to finely machined bevel edged blades, each tool has a leather “anti-shock” washer between bolster and handle, and brass ferrules to prevent handle splitting. Each chisel is individually inspected and hardness tested to ensure you get a tool of the highest quality. Overall lengths 93/4" to 123/4", blade lengths 4" to 43/4". Set of four includes: 1/4", 1/2", 3/4", and 1". 07F20 set of 4 Save Over $35! .......... $164.99 123413 set of 9 Save Over $83! ......... $469.99 07F21 1/8".................................................. $63.99 07F22 1/4".................................................. $43.99 07F23 3/8".................................................. $43.99 07F24 1/2".................................................. $48.99 07F25 3/4".................................................. $49.99 07F26 1"..................................................... $57.99 07F27 11/4"................................................$71.99 07F28 11/2"............................................... $82.50 07F29 2".................................................... $89.99

66

Japanese Chisels & Hammers

Japanese Bench Chisels. Made of durable high carbon steel, laminated onto a softer steel back for added strength, these bench chisels sharpen easily and hold an edge longer than Western chisels. Japanese chisels are individually tempered to Rc 62-64 by a master craftsman, sharpened to a razor edge and fitted with a hand-forged, hooped Japanese Red Oak handle. 9" long with a 21/4" blade length. The 4-pc. set includes 6, 12, 18 & 24mm chisels, the 10-pc. set includes 3-36mm. 140582 3mm.............................................. $42.50 140570 6mm.............................................. $42.50 140571 9mm.............................................. $42.50 140572 12mm............................................ $42.50 140573 15mm............................................ $42.99 140574 18mm............................................ $48.99 140575 21mm............................................ $48.99 140576 24mm............................................ $54.99 140577 30mm............................................ $58.99 140578 36mm............................................ $58.99 140579 42mm............................................ $64.99 140580 48mm.............................................$79.99 140620 4-pc. set Save Over $43! ......... $144.99 140581 10-pc. set Save Over $81! . .... $399.99 Japanese Shop Hammers. The heads, made of tool steel, are forged, etched, and chrome plated to be both beautiful and durable. Fitted with Japanese White Oak handles. 140568 4 oz. ............................................... $29.99 140569 13 oz. . ............................................ $38.99

Quick Cutting Corner Chisel

CROWN Classic Bench Chisels

There is no substitute for high quality, well made, comfortable to hold bench chisels. These chisels feature polished and beveled Sheffield steel blades fitted with comfortable, well shaped Rosewood handles. Blade length from 41/2" to 5", handle length 51/2". Set of four includes 1/4", 1/2", 3/4" and 1" chisels. Honing required before use. 129479 1/8".................................................$22.99 129286 1/4".................................................$22.99 129470 3/8".................................................$22.99 129287 1/2".................................................$22.99 129471 5/8"................................................. $27.99 129288 3/4".................................................$26.99 129472 7/8".................................................$26.99 129289 1"...................................................$29.99 129473 11/4"...............................................$29.99 129474 11/2".............................................. $31.99 129290 set of 4 Save Over $10! . ..........$89.99

Credit Card Orders: 800 225-1153

Perfect for squaring up “round corners” on hinge mortises, our spring loaded chisel is made of hardened steel and is sharp, ready to use right out of the box. Tap lightly with a hammer and you have a perfectly squared corner. Cutter is 3/8" x 3/8" and a perfect 90°. 143717 economy corner chisel................... $9.99 24Z25 Whiteside corner chisel................ $29.99

Solid Brass Chisel Hammers

Solid brass heads feature a domed face which helps prevent striking off center and deforming the heads of your chisel handles. Available in two weights for light or medium chisel work, approximately 8” overall length. 145811 9 oz................................................ $26.99 145812 14 oz.............................................. $26.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Chisels pfeil® PFEIL® Swiss Made Butt Chisels

PFEIL Swiss Made Bench Chisels

From The Makers Of The Worlds Finest Carving Tools We are proud to offer the first Swiss made Bench Chisels from pfeil. The lacquer-finished, contoured handles fit the hand nicely and feature a top ferrule to withstand heavy mallet blows. Blades are made of Swiss alloy tool steel and heat-treated using the latest technology to produce excellent edge-holding characteristics. Cutting edges are finely ground and polished for easy resharpening. These chisels may require slight honing to suit personal preference, but they tend to be razor-sharp, ready to go right out of the package! Overall 101/4" to 111/4", blade lengths 43/4" to 53/4". The 4-pc. set includes 1/4", 1/ ", 3/ " and 1", the 8-pc. set adds the 5/ ", 5/ ", 2 4 32 16 3/ " and 5/ " chisels. The 6-pc. boxed set includes 8 8 1/ ", 3/ ", 1/ ", 5/ ", 3/ " and 1" chisels. Complete your 4 8 2 8 4 PFEIL chisel set with a red and white Swiss flag inspired chisel roll. 05T15 4mm (5/32").................................... $32.50 05T16 6mm (1/4")...................................... $34.50 05T24 8mm (5/16").................................... $32.50 05T18 10mm (3/8")................................... $32.50 05T19 12mm (1/2")..................................... $37.50 05T20 16mm (5/8").................................... $37.99 05T21 19mm (3/4").....................................$37.99 05T22 26mm (1")..................................... $39.50 05T23 32mm (11/4")................................. $41.99 05T26 35mm (13/8")................................. $46.99 05T27 40mm (19/16")............................... $50.50 05T30 4-pc. set Save Over $39! ......... $109.99 05T29 6-pc. boxed set Save Over $44! .$174.99 05T32 8-pc. set Save Over $74! .......... $209.99 05T28 11-pc. set Save Over $124! ..... $299.99 125288 PFEIL chisel roll............................. $24.99

PINNACLE® Leather Chisel Roll

This premium leather tool roll will organize and protect your carving tools or bench chisels. Two rows of pockets hold up to 18 tools with a protective liner in the bottom of each pocket to help prevent tools from cutting the leather. The 21" x 11" roll features flaps on three sides, to prevent tools from sliding out while transporting them, and extra-long tie straps to wrap and secure the roll. 149424 . .....................................................$59.99

Butt chisels are easier to control in joinery applications than full-sized bench chisels. The faceted, contoured European Locust handles fit the hand comfortably but prevent the chisels from rolling off your bench. Blades are made of Swiss alloy tool steel and heat-treated using the latest technology for excellent edge holding. Chisels are ground and polished from the maker. Overall lengths are 6", blade lengths 33/8". The set includes 6mm (1/4"), 12mm (1/2"), 19mm (3/4"), and 25mm (1") chisels and includes a fitted wooden block to safely store and protect your chisels. 05B12 4-pc. set Save Over $17!............ $104.99 05B13 6mm (1/4")...................................... $28.99 05B14 12mm (1/2").................................... $30.99 05B15 19mm (3/4").................................... $30.99 05B16 25mm (1")..................................... $31.99

PFEIL Swiss Made 6-Piece Bench Chisel Set

Developed over the last two years and one of the last projects our friend and colleague Tim Rinehart worked on before his passing, these new Limited Edition Swiss made chisels are really special. First, they’re crafted from the finest Swiss Tool Steel, expertly ground on all sides with a 25° main bevel and a 30° micro bevel on the cutting edge. But what good is a blade without a proper handle? In this case, Elm was chosen for its’ beauty while an octagonal shape with a slight ovoid is used for improved control and comfort. The overall effect is the perfect union of old world craftsmanship, modern materials and the desire to create (what we think) may just be the perfect bench chisel. Set includes the following: 6mm, 10mm, 12mm, 16mm, 19mm and 26mm chisels and a tool roll. 05B54 . ......................................................$199.99

Precision Crafted Dog Leg Chisels

Offset 11/4" long tool steel blades have 5/16" cutting edges tapered back to their necks for the proper undercutting clearance in, jointwork and sizing operations. 33/4" hardwood handles. Factory sharpened and ready for use. 11Q10 set of 3 Save $3! ..................... $34.99 11Q51 straight chisel...............................$12.99 11Q52 right skew......................................$12.99 11Q53 left skew........................................$12.99

IRWIN/MARPLES Blue Chip Bench Chisels

These bevel-edged chisels are hardened and tempered under controlled conditions and accurately ground for precise control. Handle is square with rounded corners for comfort and to prevent rolling; made of indestructible polypropylene to withstand heavy mallet and hammer blows. Overall lengths 93/4"-11"; blade lengths 31/2" to 41/4". Set of six, in a wooden box, contains one each as follows: 1/ ", 3/ ", 1/ ", 3/ ", 1" and 11/ ". The complete eight 4 8 2 4 4 piece set is not available as a boxed set. Honing required before use. 12G11 1/8".................................................. $12.99 12G21 1/4".................................................. $12.99 12G31 3/8"................................................. $12.99 12G41 1/2".................................................. $13.99 12G51 5/8"................................................. $14.99 12G61 3/4".................................................. $15.99 12G71 1"..................................................... $17.99 12G81 11/4"............................................... $19.99 111165 4-pc. set - 1/4", 1/2", 3/4" & 1" ...... $41.50 12G15 6-piece boxed set......................... $69.99 12G20 set of 8 Save Over $36! . ......... $84.99

WoodRiver® 6-Piece Chisel Set

Beautifully crafted, well balanced 6-piece bench chisel set made by the same folks making the WoodRiver® hand planes. CRV steel blades hardened to RC59-63 with steel ferrules and nicely finished off with genuine Bubinga handles which are as much a joy to the eye and as they are to hold. Set includes 1/4", 3/8", 1/2", 5/8", 3/4" and 1" chisels. Overall lengths 91/2" to 101/2" with blades lengths from 31/2" to 4". Honing required before use. 151268. ........................................................ $79.99

WoodRiver® 4-Piece Butt Chisel Set

Beautifully crafted, well balanced 4-piece butt bench chisel set. CRV steel blades hardened to RC59-63 with steel ferrules and nicely finished off with genuine Bubinga handles. These little beauties are truly fun to use. Like they’re bigger brethren, they look impressive to the eye and really perform under use. Set includes 1/4", 1/2", 3/4" and 1" chisels. Overall length 61/2" with blades 23/8" long. Honing required before use. 152169. ........................................................$49.99

Helping You Make Wood Work ®

67


Hand Tool Mastery Chisels

Hand-Cut Dovetails DVD

Rob provides bench-side instruction on cutting “through-dovetails”, from tool selection to assembly using methods and a teaching style that's helped thousands learn how to cut what many consider the crown jewel of woodworking, the dovetail. 45 minutes. 833847 .............................$25.00

Hand-Cut Dovetails Shop Copy

A companion to the Hand- Cut Dovetails DVD, Hand-Cut Dovetails Shop Copy is a full-color, instruction manual. 84 pages with captioned photographs. 840743 ............................$24.95

Hand-Cut Dovetails Set

Includes the Hand-Cut Dovetails DVD and Hand-Cut Dovetails Shop Copy manual. 840744 SAVE $2........$47.95

Advanced Hand-Cut Dovetails DVD

Bench-side instruction on handcutting hounds tooth, half-blind and mitered edge dovetails. Building on Hand Cut Dovetails Rob takes you through the more difficult variations of the joint one step at a time. 60 minutes. 830245 ..............................$25.00

Mastering The Dovetail Saw DVD Mastery of Dovetailing starts with good sawing techniques. This DVD features saw cut to saw cut joinery, choosing a saw, saw sharpening and tuning, sawing grip and stance, 5 “P’s” to sawing, splitting the line, saw starting exercises, and vertical sawing exercises. 42 min. 835723 .............................$25.00

Rob Cosman’s Dovetail Degree DVD Set The Dovetail Degree includes all 3 Dovetail DVD's, plus the Hand Cut Dovetails Shop Copy book. 150093 SAVE $7!................................... $91.99

Scraping Wood DVD

A well-sharpened cabinet scraper is a pleasure to use and can provide a superior finished product. Rob Cosman coaches you through the steps of tuning, sharpening and using card scrapers, cabinet scrapers and scraper planes. 1 hour, 30 minutes. 842421 .......................... $32.50

The Great Hand Plane Revival DVD With Rob Cosman

Rob coaches you through reworking every part of the plane, explains their functions, potential weaknesses and recommends modern day solutions. You’ll see him use the Pinnacle Matched Blade and Chipbreaker, a unique that allows old planes to be retrofitted with 9/32" thick blade/breaker combination. The addition of Blade Adjustment Tabs allows the use of thicker, premium blades in these old gems, and you'll be making shavings of less than a thousandth of an inch in no time! 90 minutes. 150791 . ........................................................$32.50

68

Rob Cosman has been woodworking for most of his life. While earning a B.Sc. in Industrial Technology / Furniture Design at Brigham Young University, he was Dr. Dale L. Nish’s teaching assistant. Rob has also worked with many of the world’s best craftsmen – including Alan Peters, Sam Maloof, Tage Frid, Monroe Robinson and Peter Korn.

The Wood-Hinge Box DVD

Learn how to make the jigs to turn would-be scraps into beautiful wood-hinged boxes. Emphasis is placed on constructing the concealed wood hinge with options shown on completing the most difficult tasks. 1 hour, 40 minutes. 147885 . ..........................$32.50

Wood-Hinge Drilling Jig

The key to making Rob’s wooden hinge boxes is creating the wooden hinge. Using this jig and a 3/8" chuck drill you will create per fec t wooden hinges every time. The jig centers the dowel before it engages the 1/16" bit, resulting in a perfectly centered hole. 842840 .....................................................$32.99

Wood-Hinge Box, DVD And Jig Set

Combine the Wood-Hinge Box DVD and Wood Hinge Drilling Jig. (147885 & 842840 above) 150092 SAVE over $6!.......................... $58.99

Rough To Ready DVD

While you may or may not wish to dimension all your lumber by hand, knowing how is a valuable skill when power tools are not an option. Rob takes a piece of rough Mahogany through the paces of becoming straight, flat and true on all six surfaces. 47 minutes. 829247 ..........................$25.00

Drawer Making – The Professional Approach DVD Bench-side instruction on making piston-fit drawers using time-tested methods of making drawers that move with pistonlike precision. This DVD teaches you how to gain this hallmark of craftsmanship. Double DVD Set. 2 hours, 15 minutes. 834792 ..........................$40.00

Hand-Cut Mortise And Tenon DVD

Rob guides you through the process of executing the essential mortise and tenon joint with hand tools. Using a mortise chisel and mallet for the mortise and a tenon and a carcase saw for the tenon. Double DVD set. 2 hours, 10 minutes. 834793 . .........................$40.00

Hand Planing And Sharpening DVD

Rob walks you through the sharpening and use of four basic shop hand planes, the block, the smoother, the jointer and the rabbet plane. 45 minutes. 833932 . ....................... $25.00

Credit Card Orders: 800 225-1153

Rob Cosman’s Professional Crosscut Joinery Saw

“Teaching folks to make woodworking joints from the first cutting tool, the saw, is what I consider to be an essential part of good craftsmanship. To that end I have designed and built these saws to make this possible.” Based on lessons learned while logging thousands of teaching hours, across three countries, Rob built a crosscut saw for the hand tool woodworker. A .002" set produces a beautifully thin .024" kerf and the quick cutting 15 TPI blade will leave the cleanest tenon shoulders you have ever seen. Carved finger recesses and an extra heavy brass back will provide a perfect fit and balance. Each saw is personally tested by Rob prior to shipping and comes in a beautifully hand crafted Walnut and Aspen presentation/storage case. Overall saw length is 151/8", blade length is 10", cutting depth is 15/8". 150761 bone resin, shown..................... $249.99 150762 black resin.................................. $249.99

Rob Cosman’s Professional Dovetail Saw

To enable woodworkers to assemble their dovetails straight from the saw, Rob has designed and developed this dovetail saw. The first two inches of the blade has 22 TPI for ease of starting the cut, while the remainder of the blade has 15 TPI for finishing the cut quickly. With an extra-heavy brass back and an overall weight of 22 oz., the saw itself provides the downward pressure for smooth, vibration-free cuts. Composite handles, in bone or ebony resin, have carved finger recesses for a comfortable fit. A slight .002" (per side) set makes for dead straight saw cuts and produces a .024" kerf. Each saw is personally tested by Rob, and comes in a beautifully hand-crafted Walnut and Birch case. Overall length is 151/8", blade length is 10″", cutting depth is 15/8". 843975 bone resin.................................. $249.99 150090 ebony resin, shown................... $249.99

Rob Cosman's Dovetail Marker

Rob’s dovetail marker allows you to lay out both the angled face and the squared end cuts. Made from Eastern Maple, Rob planes the angles on a shooting board to ensure accurate gauges. One side is 1:6 for lay outs on softwoods, the other side is 1:7 for hardwoods. The top of the gauge is wide enough to mark 13/16" material. 842423 . ....................................................$24.95

Free Technical Advice: 800 535-4486

www.woodcraft.com


A

Rob Cosman’s Marking Gauge

Ready to use out of the box, the Cosman Marking Gauge features an extremely sharp blade that will slice through, not crush, wood fibres for a clean, crisp line. Ideal for marking dovetails, tenons or just a cut line, the head has a hard rubber o-ring embedded inside to provide just the right amount of friction for making finite adjustments efficiently. A generous flat side on the brass head prevents the tool from rolling off the bench. 5” maximum marking length. 846832 ......................................................$59.99 151097 repl. cutter...................................... $9.99

Rob Cosman Angle Trainer

Rob’s a big believer in sharpening plane blades freehand because it’s efficient and fast. Free hand sharpening is acquired through practice, but Rob’s new Angle Trainer helps you develop the muscle memory more quickly. Think of the Angle Trainer as your sharpening “training wheels.” The Trainer helps you learn, by holding your plane blade at the proper angle for primary and secondary bevels as you move the blade over your stone. Before you know it, you’ll be able to take your training wheels off and sharpen just like Rob! 150879 .......................................................$29.99

Cuts beads, pummels, balls, birds beaks, v grooves, and more!

Skewchigouge

Designed by English turner Allan Beecham. This tool will work as a skew chisel and gouge, thus the name Skewchigouge. With equal ease you can cut beads, pummels, balls, birds beaks, plane v-grooves, and more. Virtually catch proof, this amazing tool has become one of our favorites for any spindle work. Don’t let its odd looks fool you, this tool is one you’ll find more uses for every time you try it. 71/2" blade, 17" overall with stained beech handle. Honing required before use. 140474 ....................................................... $37.99

B HUNTER #3 Swan’s Neck Hollowing Tools

These swan’s neck style tools feature the unique round carbide cutters which will cut just about everything that you throw at them. Easy to control and smooth cutting the swan’s neck profile helps you reach those areas in a narrow opening vessel which are difficult or impossible to cut with a straight shafted tool. Once the tip dulls, just loosen, rotate slightly to a new razor sharp section and continue turning, and the tip is easy to replace. No grinding or lapping of the cutter is needed, and the high quality carbide tip provides an edge life 25-30 times longer than other similar tools. An aluminum oxide finish on the tool shank prevents rust. Complete with tip wrench and instructions. Available in two bends. 148762 (A) shallow swan’s neck............. $114.99 148761 (B) full swan’s neck.................... $109.99 148763 replacement tip screw.................... $4.99

CROWN PRO-PM Turning Tools

Crown has succeeded in developing tools that provide all the benefits of powdered metal, but at a reasonable price. These super grade, harder and tougher, steel tools retain an edge longer with less sharpening, European ash handles. Honing required before use. 141989* 3/8" spindle gouge..$43.99 141344 1/2" spindle gouge.$50.99 141988 1/4" bowl gouge...... $61.99 141346* 3/8" bowl gouge... ...$71.99 141345 1/2" bowl gouge.....$94.99 143750* 3/4" roughing gouge............ ................................ $91.99 142750 3/4" square nose scraper . . ...............................$58.99 142751 3/4" round nose scraper.. ... ...............................$56.99 142752* 3/4" skew................ $64.99 149351 3/4" rolled edge................... radius skew........... $88.99 142753* 1/4" diamond parting tool ................................$74.99 149108 3/8" detail gouge....$74.99 149109 1" bowl gouge............................ $144.99 149110 1/2" detail gouge............................$71.99 149111 1/4" spindle gouge........................$46.99 149112 1/2" skew gouge............................$50.99 149113 1" square nose scraper................$94.99 149114 1" round nose scraper.................$94.99 149115 1" skew chisel...............................$96.99 Crown Pro-PM Boxed Set of 5 includes (*) above. 143752 Set of 5 Save Over $42! ..........$299.99

Woodturning D

C B A

HUNTER Carbide Hollowing Tools

Tired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your problems. They will cut just about everything that you throw at them. Easy to control and smooth cutting, these are great tools for beginners and welcome additions for advanced turners. Once the tip dulls, just loosen, rotate slightly to a new razor sharp section and continue turning. When it eventually wears out, the tip is easy to replace. No grinding or lapping of the cutter is needed, and the high quality carbide tip provides an edge life 25-30 times longer than other similar tools. Aluminum oxide finish on the tool holders prevents rust. Strong metal shanks minimize vibration and chatter. Complete with tip wrench and instructions. Available in 4 sizes to fit all your needs. #3 Hunter Tool is ideal for turning lidded boxes, goblets, and other small diameter work. Removes wood quickly, efficiently, and cleanly prior to sanding operations. 3/8" diameter cutter is mounted on a 43/4" long, 3/8" diameter shank; 193/4" overall tool length. #4 Hunter Tool is the first choice for turning medium sized bowls. Removes wood very quickly and produces outstanding finishes prior to sanding. This tool is also useful for rough turning and finishing turning. 1/2" diameter cutter is mounted on a 61/2" long, 1/2" diameter shank; 24" overall tool length. #6 Hunter Tool, A Woodcraft Exclusive! Designed to meet your most demanding turning needs and will amaze you with its ability to make heavy, yet smooth cuts. The huge 3/4" diameter tool shank provides vibration and chatter free cuts with the 1/ " diameter cutter. 81/ " tool shank; 26" overall 2 2 tool length. 147946 (A) #3 tool...................................... $74.99 147949 #3 replacement carbide tip......... $21.99 147381 (B) #4 tool......................................$99.99 147382 #4 replacement carbide tip........ $21.99 147947 (C) #6 tool....................................$109.99 147948 #6 replacement carbide tip..........$20.99 #5 Carbide Hollowing Tool The #5 was designed with box makers and turners in mind, who like to work on smaller but deep vessels. The Hunter #5 features a 5/8" shank tapering down to a 3/8" cutter so you can extend over the rest without vibration and chatter for smoothing out those deep boxes and vessels. 81/4" shank, 25" overall tool length. 149357 (D) #5 tool.................................. $119.99

GENERAL 25-024 Mini Lathe Duplicator

Designed specifically for mini or midi style lathes with shorter beds than a standard full size lathe, and fits most bench-top or midi-lathes with cast iron bed-ways and a 6" - 14" swing. Use a template or original spindle for pattern. Max duplicating length 17 7/8", Max duplicating Diameter 7". 844256 .....................................................$219.99 151007 replacement cutter.......................$20.99

WoodRiver® Super Long Bowl Scraper

This is the longest and thickest finishing scraper available. This massive tool has a 141/2" blade machined from 3/4" x 1/2" HSS bar stock, with tip ground in the round side scraper pattern. This tool’s heft reduces

vibration and allows greater tool rest overhang. It’s exceptional for working extra deep urns, vases, or voluminous small mouth bowls. 111/2" handle. Honing required before use. 12W41 .................................................... $104.99

Helping You Make Wood Work ®

69


Woodturning

PINNACLE®® Cryogenic Turning Tools

PINNACLE®®® Cryogenic 5-Piece Miniature Set

This Pinnacle® turning boxed tool set features cryogenically treated steel for exceptional edge retention lasting two to 3 times longer than standard M2 steel. The set is perfect for crafting those smaller delicate turnings and includes: 1/8" gouge, 1/4" gouge, 1/ " parting tool, 1/ " skew chisel and a 1/ " round 16 4 4 nose scraper. Each tool measures approximately 1 1 10- /4 ¾" long with a 6- /4" handle. 149547 .....................................................$109.99

PINNACLE®® Cryogenic Pen Turner’s Set

The perfect set for turning small projects. Appropriately sized (approximately 9" long), so you won’t get worn out trying to finesse a small turning with standard size tools. Plus, the cryogenically treated steel blades will hold an edge two to 3 times longer than standard M2 tools. This means you can turn pen blanks from the toughest plastics to the hardest woods. The three piece set contains a 1/4" bowl gouge, a 1/2" oval skew chisel and a 1/8" parting tool. 149546 .....................................................$109.99

Modular System Saves You Money!

A

D C

E PINNACLE®

B Lathe Tool Rest System

Tired of using a tool rest that’s too short, too soft and designed by an engineer that has no idea what it’s like to even use a lathe? If you’d like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you. Our straight “L” shaped rest improves tool control by allowing interferencefree hand movement over the full length of the rest. The top of the rest features a hardened 1/4" steel rod, which will remain nick-free, even after hours of use. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration-free scraping. Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14". The “S” bowl rest is 14" long with a 5" dia. bend on one end and an 8" dia bend on the other. Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Posts screw into rests and can easily be removed and attached to a different accessory. 123580 (A) 4" straight tool rest.................$28.99 123581 6" straight tool rest......................$35.99 123582 12" straight tool rest....................$49.99 140456 (B) small bowl rest....................... $19.99 140457 (C) large bowl rest........................$29.99 145950 (D) “S” bowl rest...........................$38.99 123585 5/8" dia. post, 3.5" long................$13.99 124186 3/4" dia. post, 3.5" long................$13.99 123584 7/8" dia. post, 3.5" long.................$13.99 141931 1" dia. post, 3.5" long.................. $13.99 123583 (E) 1" dia. post, 5" long................ $14.99

70

BEALL Wood Buff System

Give your next small project a spectacular finish quickly and easily with this set of three 8" diameter buffs, compounds, and a quick-change adapter. Whether you’re polishing an oil finish on a box, buffing the scratches out of a turned bowl or platter, or finishing pen blanks, this system will leave a glass smooth surface on whatever you hold to it. The secret to the system is the dozens of soft cloth layers apply compound evenly without rounding over sharp features and edges. The wheel actually splays out slightly to conform to the shape being buffed. The all-flannel tripoli buff will level out the finish and remove any scratches. The flannel/cotton mix white diamond buff takes out any remaining small scratches and begins to polish. The all-cotton carnauba wax buff yields a high gloss polish, similar to a lacquer finish. Changing buffs takes seconds with the quick-change adapter; it adjusts to fit 1/2" or 5/8" motor arbor shafts (1/2 HP or larger, 1725 RPM motor recommended). The optional #2 Morse Taper mandrel enables you to use the buffs on the lathe (you’ll have to make a 1/4"-20 drawbar to hold it in place). The compounds will last for years when used moderately. Complete instructions included. Not for use in a hand-held drill. System includes 3 buffs, quick-change adapter and 3 compounds. 141069 wood buff system..........................$69.99 141070 #2 MT mandrel............................. $11.99 141073 tripoli bar (6" x 2" x 1").................... $5.99 141072 white diamond bar (6" x 2" x 1")..... $5.99 141071 carnauba bar (51/2" x 2" x 5/8")....... $6.50 150888 #1 MT adapter.............................. $11.99 827106 mandrel adapter........................... $16.99 845962 mandrel extension........................ $15.99

Credit Card Orders: 800 225-1153

Manufactured in Sheffield exclusively for Woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, without the cost of powdered metal tools. Cryogenically treatment uses sub-zero temperatures, down to -300°F, to modify the micro-structure of the steel into a more uniform grain structure that allows you to hone to a fine edge that is more durable and more resistant to wear. Cryogenically treated Tools stay sharp two to three times longer than standard M-2 High Speed Steel tools so you turn more and sharpen less! Each tool is mounted in a European ash wood handle. Overall tool lengths range from 17" to 23". 149350 1/4" spindle gouge.........................$39.99 148785 3/8" spindle gouge......................... $41.99 148784 1/2" spindle gouge.........................$50.99 149347 1/4" bowl gouge..............................$55.99 148782 3/8" fingernail bowl gouge............. $67.50 148781 1/2" fingernail bowl gouge............. $81.99 148783 3/4" roughing gouge........................$77.50 151210 11/4" roughing gouge.....................$84.99 151211 13/4" roughing gouge...................$139.99 149349 1/2" round nose scraper................$46.99 149348 3/4" side cut scraper......................$62.99 148786 1" square nose scraper................ $56.99 148787 1" round nose scraper..................$54.99 151212 1" oval skew chisel......................$139.99 148788 3/4" skew chisel.............................$50.50 148789 3/16" diamond parting tool............ $61.99 149346 bowl finish scraper........................ $91.99 151330 pepper mill tool.............................$49.99 Spindle Turning Set contains 3/8" spindle gouge, 3/ " roughing gouge, and 3/ " diamond parting tool. 4 16 149020 save $24 over individual tools...$154.97 Bowl Turning Set contains 3/8" fingernail bowl gouge, 1" round nose scraper, and 3/16" diamond parting tool. 149021 save $21 over individual tools...$159.97 Turner’s Set of 5 Tools contains the tools necessary for most projects. Includes 3/8" spindle gouge, 3/8" fingernail bowl gouge, 3/4" roughing gouge, 3/4" skew chisel, and 3/16" diamond parting tool. 149022 save $27 over individual tools.. $264.99

BEALL 3-On Lathe Buffing Mandrel

Lets you run the three buffs at one time! One end of the 18" mandrel (requires 18" between centers) is machined to a #2 Morse Taper to fit in the head stock of your lathe, the other end is machined to accept the tail stock. Now you can quickly and efficiently take small items through three steps of buffing without stopping to change buffs. Kit contains the mandrel with spacers, three buffs, tripoli, white diamond compounds and carnauba wax. 823903 .......................................................$89.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodturning

Extra Length Handles

WoodRiver®® Turning Tools

These high quality turning tools are designed to meet the needs of any skill level turner, from beginner to demanding professional. The high speed steel blades are hardened to Rc 62-64 and set in extra long 16" hardwood handles with brass ferrules. The extra length of the handles allows greater control and comfort for those long turning sessions. The HSS blades stay sharp up to six times longer than carbon steel. Available exclusively at Woodcraft, these tools represent great value and quality. Honing required before use. 145903 1/4" spindle gouge............... $20.99 145907 1" oval skew chisel.................................. $41.99 145904 3/8" spindle gouge............... $25.99 146229 1/2" round nose scraper.......................... $32.99 145905 1/2" spindle gouge............... $31.99 146230 3/4" round nose scraper.......................... $38.99 145906 5/8" roughing gouge............. $41.99 146226 3/4" curved scraper.................................. $36.99 146225 3/4" roughing gouge............. $44.99 145908 1" square nose scraper.......................... $43.99 145910 1/8" fingernail bowl gouge... $31.99 146224 1" hook nose scraper.............................. $43.99 145911 1/4" fingernail bowl gouge... $36.99 146227 11/2" left cut, H.D. bowl scraper............. $86.99 145912 3/8" fingernail bowl gouge....$41.99 146233 1/8" diamond parting............................... $32.99 150492 1/2" fingernail bowl gouge... $45.99 145909 3/16" diamond parting tool...................... $36.99 146174 1/2" bowl gouge.................... $49.99 146228 3/8" beading/parting................................ $33.99 146231 1/2" oval skew.......................$31.99 146222 1/4" captive ring tool................................ $29.99 146232 3/4" oval skew...................... $38.99 146223 3/8" captive ring tool................................ $32.99 Turning Tool Sets feature the same high quality HSS blades as the individual tools. 63/4" blades are set in 16" hardwood handles with brass ferrules. Honing required before use. Beginner’s Turning Set contains 3/8" spindle gouge, 3/4" roughing gouge, 1/2" oval skew chisel, 1/2" round nose scraper, and 1/4" bowl gouge. 145913 .............................................................................................................................................$136.99 Turner’s Set of 8 contains all the tools necessary for most turning projects. Set contains 1/4" spindle gouge, 1/2" spindle gouge, 3/4" roughing gouge, 1" oval skew chisel, 1" square nose scraper, 1" round nose scraper, 3/16" diamond parting tool, and 3/8" bowl gouge. 145914 ...........................................................................................................................................$229.99

A

B

WoodRiver® Turner’s Sanding Pack

This convenient dispenser is loaded with five 1" x 20' rolls of clothbacked aluminum oxide abrasive. Perfect for spindle, pen, or any turning where small strips of abrasive are needed. Each dispenser pack contains rolls of 150, 240, 320, 400, and 600 grit abrasives. Just pull out the length of abrasive strip you need and tear it off on the metal cutting strip on the edge of the dispenser. 148558 sanding pack................................ $19.99 148559 repl. roll 150 grit............................. $4.99 148560 repl. roll 240 grit............................. $4.99 148561 repl. roll 320 grit............................. $4.99 148562 repl. roll 400 grit............................. $4.99 148563 repl. roll 600 grit............................. $4.99

WoodRiver® 5-Piece “Mini” HSS Turning Tool Set

This HSS set is a great addition to any turners tool kit for smaller turning projects. Set includes 1/8" and 1/ " spindle goug4 es, 1/8 " parting tool, 1/4 " round nose scraper, and 1/ " skew chisel. Tools are approx. 10" long, complete 4 with wooden case. Honing required before use. 143718 ......................................................$43.99

Steel Center FInder

This Steel Center Finder accurately locates the center of round or square stock up to 6" in diameter. If you are like us and break several of the plastic centering squares each year, here is the answer. This quality, heavy steel machinist’s center square will last a lifetime. 143559 ......................................................$22.99

Zero Zero Center Finder

Kel McNaughton System

Tu r n w a s t e d wood in to another valuable turning! This tool won’t put the shavings back together again, it just avoids creating them in the first place! Using the McNaughton System you’re able to make several bowls from one blank (green or dry) by actually removing bowl blanks from the center of the main blank with each bowl you turn. Not only do you save money, but you also save time since the resulting blank is already roughed out

into a bowl shape. The Standard System contains three curved D2 HSS blades for cutting bowls with diameters from 4" to 14", one straight blade for basic coring, a handle, and special 1" diameter tool post. This tool post is specially designed to not only guide the curved tools through the blank, but it also holds the tool in the proper upright position and protects against dangerous catches. The Large System contains three larger, thicker blades for releasing bowl centers up to 18" diameter, a handle, and special tool post. Besides turning wider bowls, the Large System is also capable of turning out deeper blanks. The Complete System contains all 7 blades, both handles, and one special tool post. If you turn expensive or rare woods, the savings you’ll gain in both material and rough-out time from only a few “nests” of bowl blanks make this a must have tool. 127676 (A) standard system................... $309.99 127677 (B) large system.......................... $334.99 127678 complete system........................ $449.99

Quickly, easily, and accurately determines center for round or square stock up to 8" in diameter and hexagons up to 5 3/4" in diameter. Place the plastic center finder over the end of the piece, scribe a line, rotate the center finder about 90° and scribe a second line. The intersecting lines define the workpiece center! 02J14 ......................................................... $8.99

Don't See It? Can't Find It? woodcraft.com has over 15,000 items

Helping You Make Wood Work ®

71


Woodturning

SORBY “Midi” Turning Tools

SORBY HSS Turning Tool Set

Includes the 8 basic tools you’ll need for spindle and bowl turning. These HSS tools will keep a sharpened edge about six times longer than carbon steel, and resist “blued” softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21". 14J41* 1/4" spindle gouge........................$40.99 06O14* 1/4" parting tool............................$50.99 06O31* 3/8" bowl gouge............................ $79.99 06O21* 1/2" spindle gouge........................ $61.50 06O34** 1/2" round nose............................. $51.29 06O11* 3/4" roughing gouge......................$66.50 06O24* 3/4" skew.......................................$59.99 06O41 1" square nose.............................$69.99 11L40 set of 8 Save Over $31! . ....... $449.99 Beginner’s Turning Set will get you started right! Contains the 5 basic spindle turning tools indicated by (*) above. Superior tools that will form the heart of any turning tool collection. 06O30 set of 5 Save Over $34! . ........ $229.99 Intermediate Turning Set is designed for both spindle and bowl work. Contains the 6 tools indicated by (*) above and below. 146162 set of 6 Save Over $28! ......... $324.99 Additional Styles provide extra versatility for bowl and spindle work. Ash handles. 14P41* 1/8" parting tool.............................. $47.99 06O81 3/16" diamond parting..................$66.99 06O51 1/4" bowl gouge............................. $67.99 06O61* 3/8" spindle gouge........................$50.99 06O54 1/2" bowl gouge.............................$99.99 14O52 1/2" oval skew .............................. $51.99 06O64 3/4" spindle gouge........................$84.99 06O71* 3/4" oval skew ............................. $56.50 06O74 1" oval skew ................................$59.99 06O44 11/4" roughing gouge.................$102.99 14O62 11/4" oval skew .............................$71.50 14P42 3/8" beading & parting ................$58.29

SORBY Fingernail Profile Gouges

The “fingernail” grind has been a popular edge with woodturners because it is easy to use and

control, plus it’s B extremely versa- A tile.These new fingernail gouges feature an easy to use, medium grind, with wing tips that have been ground back so the tool does not “catch” on the work piece. With these tools, pull and push cuts, delicate shearing cuts, or even full profile cuts can be made with ease. An added advantage of the medium grind is that it lends itself to easy modification, allowing you to create profiles specifically suited to your turning requirements. Overall length 161/2". 126941 (A) 3/8" spindle gouge, shown......$43.99 126942 (A) 1/2" spindle gouge...................$56.29 126943 (B) 3/8" bowl gouge, shown.......... $74.99 126944 (B) 1/2" bowl gouge.......................$89.99

HSS Parting Tools

Are ground with a unique hollow ground edge that forms a B pair of cutting spurs on each side of bevel edge. These spurs score cross grain fibers and shear end grain leaving a A smooth surface. Blades are 1 1 6 /2" long, handle length 11 /2". 14W51 (A) 3/16" thick blade....................... $89.99 124054 (B) 1/16" thick blade...................... $61.99

Bedan

A large 3/8" parting and beading tool with unique, ground tapered sides and a top cutting edge. Great for parting into faceplate work. 06O12. . .............. $54.99

SORBY Box & Bowl Scrapers

These new shapes are the perfect width for smaller bowls and boxes, yet still thick enough to handle serious turning without chatter. Both are 3/4" wide, 16" C long, with 10" ash handles. Roundnose Scraper. A curved end profile makes this tool excellent for creating, smoothing, or blending curved surfaces on bowls, spindles or round bottom box work. Heavy enough for aggressive shaping, yet small enough for sensitive refining cuts. 126954   (A) ................................................ $58.50 Side-Cut Scraper. The cutting profile of this scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radiused point at the bottom corner of the scraper creates a smooth transition from a side wall to a flat bottom. 126955   (B) ................................................ $61.50

72

B

Finally, midsized tools for midsized work. Lathe tools traditionally have come in two sizes, full size and miniature. Full-size tool handles and blade lengths are inconvenient when working on medium to small projects, and mini tool blades and handles are just too small for anything but miniature work. With an overall length of 13" and a blade length of around 4", this new line from Sorby gives you just the right amount of blade and handles that are large enough to grip, yet are small enough to make them easily maneuverable. The perfect sized tools for midi and mini lathes. 141970 1/4" bowl gouge............................. $41.50 141971 1/4" spindle gouge........................ $41.50 141972 1/2" spindle gouge........................ $41.50 141973 1/16" fluted parting tool................. $42.50 141974 1/2" skew chisel............................. $42.50 141975 1/2" curved scraper....................... $42.50

SORBY Extra Heavy-Duty Scrapers

A Woodcraft Exclusive, these scrapers are a full 1/ " thick 2 to help eliminate chatter. Unlike most heavy-duty scrapers, which are too wide to make tight radius turns or to be used in narrow turnings, these scrapers are sized to work in most turning situations. All feature 7" long blades and 14" Ash handles. 145700 1" square nose.............................. $79.99 145701 1" bowl........................................... $79.99 145702 1" round nose................................$83.99 145703 1/2" round nose..............................$64.99 145704 1/2" square nose............................$64.99

A 1/ " 3/ " 8 16

3/ " 8

SORBY Beading Tools

D Heavy-Duty Bowl Scrapers. First introduced by master craftsman Richard Raffan, these shapes have been found to be most efficient in producing the final surfaces on bowls. The curved tips with elongated side edges can clean up rough, irregular cuts left by gouges, and cut a more pleasing curved shape too. Available in curved left and curved right styles. Blades are 7" long x 11/2" wide x 3/8" thick with 14" ash handles. 06O92 (C) left scraper .............................$109.99 06O93 (D) right scraper . .........................$109.99

Credit Card Orders: 800 225-1153

Actual Size 5/ " 16

1/ " 4

You don’t have to be an expert to turn perfect beads. This specially ground set of High Speed Steel scrapers will shape beads from 1/8" to 3/8" with absolute consistency each time you use them. Their design enables the forming of a single bead, or a line of beads for really ornate projects. For spindle and bowl work they will add the finest touch of decoration to your creations. 61/2" ash handles, blade lengths 41/2". 14Y53 1/8"..................................................$36.99 14Y54 3/16".................................................$36.99 14Y55 1/4"..................................................$42.99 14Y56 5/16".................................................$42.99 14Y57 3/8"..................................................$42.99 06O86 set of 5 Save Over $27! ........... $174.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodturning A B

SORBY Chatter Tool/Scraper

C

D

E

F

G

H

I

J

SORBY Sovereign System

The Sovereign turning system from noted turning tool manufacture Robert Sorby, offers a delicate combination of comfort and balance just where you need it. Beautifully engineered, this versatile tool system not only looks good, it feels great, and the interchangeable tool handles are available in 16 and 22 inch lengths. The handles are made of aluminum alloy to give you the best of strength, balance and vibration dampening qualities and each handle is equipped with a durable Softex grip for extra comfort and control. Both handles will accept turning tools with a 5/8" diameter shaft, but 3/8" and 1/2" collets are also included so that you can adapt the handle to a variety of tools. The Sovereign System offers several options to aid in your turning projects. The addition of a side handle for added control, or if extra weight is needed you can add a counterweight to the end of the handle. Unscrew the end cap and attach the counterweight to the end cap and reattach. If a longer handle is needed use the optional coupler to attach two of the handles together providing a handle up to 44" in length.

K

L

M

N

O P

150107 150108 150109 150110 150111 150112 150113 150114 150115 150116 150117 150118 150119 150120 150121 150122 150123 150124 150125 150636

Q

(A) 16" handle...............................$83.99 (B) 22" handle...............................$94.99 counterweight............................... $17.99 side handle.................................. $21.99 (C) bowl gouge 1/4"........................$29.99 (D) fingernail bowl gouge 1/4".......$29.99 (E) bowl gouge 3/8"........................$40.99 (F) fingernail bowl gouge 3/8".......$40.99 (G) bowl gouge 1/2".......................$53.99 (H) fingernail bowl gouge 1/2".......$53.99 (I) bowl gouge 3/4".........................$71.99 (J) extra long bowl gouge 1/2".......$69.99 (K) extra long bowl gouge 3/4"......$89.99 (L) spindle gouge 3/8".................. $21.99 (M) fingernail spindle gouge 3/8".$21.99 (N) spindle gouge 1/2"...................$28.99 (O) fingernail spindle gouge 1/2" .$28.99 (P) multi tip hollowing tool...........$63.99 (Q) hollow master.........................$53.99 coupler..........................................$15.99

Termite Hollowing Tool SORBY Hollow Masters

Features a flat bottom for increased stability and control. The 1/4" wide HSS cutter can be swiveled to allow the cutter to reach otherwise inaccessible areas inside hollow forms. The included 1" round scraper cutter can be mounted in place of the hollowing cutter for final inside smoothing. Full-sized model is 24" long with an 8" reach, mid-sized is 181/2" with a 6" reach. 820045 full-sized........................................ $83.99 831862 mid-sized........................................ $73.99

Angelfire™ Women’s Turners Jacket

Ultimate protection is a must from flying debris, shavings, and even stains while turning. Angelfire Women’s Turners Jacket was designed to provide comfort and full protection of the upper body. Adjustable cuffs and a welder’s collar will help prevent debris from going down your back or up the sleeves of your shirt. Constructed from brushed 9 oz. cotton these jackets feature dual scribe pockets on the sleeves along with dual interior pockets one of which is zippered. 151055 chocolate, medium.......................$34.99 151056 chocolate, large.............................$34.99 151057 chocolate, x-large..........................$34.99

Using a unique beveled, circular cutting tip, this revolutionary tool makes fast, deep, controlled hollowing cuts in end grain quickly and easily. You no longer have to be an expert woodturner to safely perform difficult end grain cuts in hollowing operations. Machined from HSS, the Termite ring tip produces a clean shearing cut, which means you spend less time sanding and finishing and more time turning! The tool comes with 2 interchangeable ring tips, a #1 (5/16" dia.) and a #2 (7/16" dia.). A larger #3 (9/16" dia.) ring tip is available as an accessory. Overall length

BSX Woodturning Jacket

Ultimate protection is a must from flying debris, shavings, and even stains while turning. BSX Woodturning Jackets were designed to provide comfort and full protection of the upper body. Adjustable cuffs and a welder’s collar will help prevent debris from going down your back or up the sleeves of your shirt. Made of 9 oz. cotton these jackets feature a scribe pocket on the left sleeve along with a pocket on the right side interior. 151052 khaki, large....................................$29.99 151053 khaki, x-large.................................$29.99 151054 khaki, 2x-large...............................$34.99

This multi-functional turning tool, can be used as a shear scraper or a decorative, “chatter” tool. When used as a chatter tool it creates decorative textures as the flexible blade vibrates, or chatters, when touched to the turning stock. This fast bouncing action causes the blade to make small, rhythmic cuts until a pattern has been formed. Textures can be changed depending on the speed of the lathe, wood density or the pressure of the tool against the work piece. Chatter work can be applied to end-grain only. Kit comes with chatter tool, square and point cutter, domed and hollow cutter, shear scraper cutter and Allen wrench. Tool measures 13" overall length. 06O65 chatter tool/scraper kit...................$86.99 06O96 repl. square & point cutter............... $5.99 06O98 repl. domed & hollow cutter............. $5.99 829953 repl. shear scraper cutter............ $11.99

www.woodcraft.com

is 23 1/2". Cutters can be quickly reground to original factory sharpness using the supplied grinding point and grinding jig block. Kit includes tool shank, #1 and #2 cutting tips, grinding jig, stone, and instructions. 124354 complete kit...................................$99.99 124355 replacement #1 tip.......................$24.99 124356 replacement #2 tip.......................$28.99 124357 replacement #3 tip....................... $27.99 127129 repl. grinding point...........................$7.99

WoodRiver®® Spindle Steady Rest

Used to prevent whip and vibration in long or thin spindles while turning, this heavy cast iron Steady Rest features three adjustable ball bearing guides with a maximum capacity of 3". The Steady comes with two spacer blocks which allow it to be used on lathes with 12", 14", or 16" swings. 145095 .......................................................$42.99

Helping You Make Wood Work ®

73


Woodturning Easy Wood Tools Ci3 Easy Hollower #5

F E

C D A

R2

C

B

ci0, ci3 ci1, ci2 EASY WOOD Tools

Lexan®

ci4

The beauty of these revolutionary turning tools is the uniquely designed carbide cutters. Say goodbye to sharpening, as these cutters add up to 20 hours of additional turning time over conventional tools, once dulled, simply change it. Secondly, the cutter’s designed so that you don’t have to “find the bevel” when turning. Simply advance the tool slowly into the work piece and begin cutting straight in, or sweep the cutter from left to right, or right to left. The Ci1 Easy Rougher hogs material off effortlessly by transferring cutting pressure directly to the tool rest and comes standard with an R4, 4" radiused square cutter, for roughing larger pieces. Options include an R2, 2" radiused square cutter, used for finishing inside bowls under 8" in diameter and a square head cutter for roughing and creating square inside corners. The Ci0 & Ci3 Finisher features a round carbide cutter for inside work on smaller bowls, or for cutting coves on spindle work. The Ci4 Easy Detailer is paired with a diamond shaped cutter that can be used as a parting tool, as well as creating beads, coves, v-grooves, or a dovetail for chucking bowls. The David J. Marks Ci1 Rougher is a limited edition, with a laser engraved signature endorsement from David Marks that is paired with a 20" Bubinga handle (overall length 281/2"). There is no substitute for proper eye protection, so we recommend the Lexan® chip deflector which attaches to the shaft of the tool and helps deflect the massive amounts of material these tools remove. Full Size: 1/2" x 81/2" Tool, Overall Length 231/2" 149926 (A) ci1 easy rougher...................$126.99 149927 (B) ci0 easy finisher....................$142.99 151020 (C) ci4 easy detailer...................$139.99

G

R4

149929 (D) ci1 easy rougher, ................................ David J. Marks limited edition...$145.99 149930 ci1 repl. square cutter w/screw .$13.99 149931 ci1 repl.R2 cutter w/screw.......... $13.99 149932 ci1 repl. R4 cutter w/screw......... $13.99 149947 ci0 repl. round cutter w/screw.... $18.99 150887 ci4 repl. diamond shaped cutter ............ w/screw........................................ $18.99 149948 (G) chip deflector for 1/2" bar....... $26.50 Mid-Size: 3/8" x 7" Tool, Overall Length 23" 149928 (E) ci2 mid-size rougher............. $119.99 151018 ci3 mid-size finisher................... $119.99 151019 ci4 mid-size detailer................... $119.99 149933 ci2 repl. square cutter w/screw .$14.99 151021 ci2 repl. R2 cutter w/screw......... $14.99 845747 ci3 repl. round cutter w/screw.... $16.99 150887 ci4 repl. diamond shaped cutter ............ w/screw........................................ $18.99 151022 (G) chip deflector for 3/8" bar....... $24.99 Mini-Size: 3/8" x 4" Tool, Overall Length 151/2" 845506 ci2 mini rougher............................$91.99 845746 (F) ci3 mini finisher.......................$91.99 150886 ci4 mini detailer............................$91.99 149933 ci2 repl. square cutter w/screw .$14.99 151021 ci2 repl. R2 cutter w/screw......... $14.99 845747 ci3 repl. round cutter w/screw.... $16.99 150887 ci4 repl. diamond shaped cutter ............ w/screw.........................................$18.99 151022 (G) chip deflector for 3/8" bar........$24.99

The Ci3 Easy Hollower #5, used to hollow vessels up to 5" in diameter, incorporates all of the same Easy Wood Tool technology and benefits that you’ve grown to love. Using the same cutter as the Ci3 Mid-size and Mini-size there is no need to ever sharpen this tool; once dulled simply replace the cutter. Incorporating a 1" wide platform into the tool combined with the use of a “Super Wide” flat tool bar allows a natural presentation of the cutter, at the perfect cutting angle. This makes the normally tedious or difficult to make “blind cut” on inside of a hollow form something that even a novice can perform. Blade width 1", blade length 91/2", handle length 16”, overall length 251/2". 151267 .....................................................$149.99

GALBERT Turner’s Caliper

The Galbert Caliper safely provides a constant, accurate reading of the diameter of the work piece while you're actually turning the workpiece. Gone are the days of setting multiple pairs of calipers to varying diameters, since this “Turner’s Tape Measure” allows you to see real time measurements as you turn. The Galbert Caliper provides a reading range from 23/4" down to 1/2" when working on 23/4" or less material. 151266 ....................................................... $79.99

Double-Face Turning Tape

This super-strong, double-sided adhesive tape is the quickest way to secure bowl blanks, and other pieces under 10" diameter on faceplates. All stock must be dry and milled flat for bonding. Oil-resistant, cloth-backed tape is available in two widths. 15D25 1" x 36 yds....................................$20.99 15D26 2" x 36 yds....................................$42.50

PINNACLE® Turner’s Leather Apron A

B

C

Easy Wood Tools Aluminum Face Plates

Easy Wood anodized aluminum faceplates are precision machined to meet the needs of the most demanding wood turner. Faceplates are drilled with eight screw holes for secure mounting, along with a 5/ " diameter hole for breaking the faceplate free. 16 Aluminum faceplates are an excellent choice for green wood turning since they will not transfer stains or rust and because they are softer than steel they reduce the amount of tool damage from accidental

74

D

E

F

contact. Available in three diameters, 1" x 8 tpi and three diameters, 11/4" x 8 tpi. 151012 (A) 2" dia., 1" x 8 tpi.......................$20.99 151013 (B) 3" dia., 1" x 8 tpi......................$25.99 151014 (C) 4" dia., 1" x 8 tpi......................$30.99 151015 (D) 21/2" dia., 11/4" x 8 tpi............. $24.99 151016 (E) 31/2" dia., 11/4" x 8 tpi............. $27.99 151017 (F) 41/2" dia., 11/44" x 8 tpi ............$33.99

Credit Card Orders: 800 225-1153

Yo u n e e d a l l t h e protection you can get from shavings, stains, and flying debris while turning. Our leather turner’s apron provides great protection without restricting arm movement. Durable, yet soft and comfortable to wear, it’s made from full-grain cowhide segments stitched with heavy-duty thread. Weighs just over a pound. The collar uses hook & loop style fasteners and can be removed from the apron. Straps crisscross over your back and are easy to adjust for a fit that’s just right for you. Apron is 21"W x 41"L. Features two pencil pouches outside and two “shaving-free” pockets inside. 149419 ......................................................$99.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodturning A

B

C

Hold Fast™ Vacuum Chucking System

More and more often turners are solving difficult workpiece holding problems by using vacuum chucking. Vacuum chucking is perfect for securely holding turnings without marring surfaces and fast chucking and removal of workpieces. When reversing bowls to turn of the base vacuum chucking provides unobstructed access to the entire surface so you can leave no holding marks and vacuum chucking makes holding natural edge bowls easy! The Hold Fast™ system along with a compressor is all you need to set up a vacuum chuck on any lathe with a hollow headstock spindle and #2 Morse Taper. The system is comprised of a dual venture vacuum generator which requires only 2.5 CFM between 55 and 65 PSI. The vacuum generator has a built in pressure regulator and vacuum gauge. The vacuum adapter passes through your hollow headstock to connect the vacuum generator to the vacuum chuck. The adapter’s sealed bearing greatly reduce the vacuum required compared to other brand adapters with “leaky” unsealed bearings. The adapter features an 18" plated threaded tube which you cut to fit your lathe headstock. The 3" Vacuum Chuck Head can hold convex or concave shaped workpieces. Made of glass filled nylon with an aluminum mounting adapter and comes with two O-ring seals to hold convex or concave pieces and anti lock spindle washer. This system includes everything you need to move up to vacuum chucking including an instructional DVD. 149360 for 1" x 8tpi lathe spindles ....... $259.99 149361 for 11/4" x 8tpi lathe spindles.... $259.99 149363 3" vac. head only 1" x 8 TPI ........ $61.50 149364 3” vac. head only 11/4" x 8 TPI .... $61.50 149365 6" vac. head only 1" x 8 TPI ......... $72.99 149366 6" vac. head only 11/4" x 8 TPI . ... $72.99 149367 repl. seals (2) for 3" head............... $4.99 149368 repl. seals (2) for 6" head............... $4.99 Hold Fast™ Chuck Reversing Adapters feature #2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck. Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock. By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly center your bowl on the vacuum head to finish turning perfectly centered! 149369 reversing adapter for 1" x 8 TPI lathes.... ...................................................... $32.99 149370 reversing adapter for 11/4" x 8 TPI lathes. ..................................................... $32.99 Hold Fast™ Vacuum Adapter Kit contains all the parts necessary to pass vacuum through your headstock if you already have a vacuum pump. The kit features the same sealed bearings, 18" threaded tube as the complete system, and 4' of 3/ " ID vacuum hose. Provides an easy method of 16 attaching a vacuum source to any wood lathe with a #2MT hollow headstock spindle. Can be used with any of the vacuum heads listed above or other user made fixtures held on a face plate. 149362 .......................................................$59.99

Woodturner’s Calipers

are indispensable for measuring diameters and wall thicknesses of large bowls during turning. The special double end design transfers a measurement from one tip to the other tip, so thicknesses can be figured without removing the caliper from the work in progress. Made of nickel plated steel with a brass wing nut and screw. (A) Inside-Outside Calipers, 6" from pivot to tips. 09N22 ...................................................... $28.50 (B) Double-Ended Calipers, 7" from pivot to tips. 09N21 . ...................................................... $33.99 09N20 set of 2 (A&B) Save $6! ............ $56.25 (C) Hollow Vessel Calipers. Similar in function to the calipers above, but with a unique shape that allows you to measure wall thickness in hard to reach areas, especially when working on narrow opening vessels. Large is 10" from pivot to point, small is 5". 142733 small caliper.................................$22.99 142732 large caliper................................ $35.99

GRÖZ 8" Caliper & Divider Set

Designed for reliable, accurate layout and measuring. Finely machined nuts run cleanly and quickly to secure legs exactly to dimension. Divider legs are precision ground to fine, hardened points for perfect layouts. 8" size is perfect for general bench and lathe work. Legs are finished with a durable black epoxy finish, all other parts are bright nickel plated. Three piece set is packaged in a durable storage wallet. 141595 8" outside caliper........................ $21.99 141596 8" inside caliper........................... $21.99 141597 8" dividers.....................................$22.99 148109 set of 3 Save Over $17! .............$49.49

A

B

Value-Priced Live Tail Centers

These value-priced centers have removable centers: #1 Morse Taper comes with a point and a cup with point; #2 comes with a cup with a removable point. Both feature smooth ball bearings for long life. 141059 (A) #1 MT value center................$15.99 141060 (B) #2 MT value center................$15.99

A

B

Drill Chucks & Live Center

(A) Heavy-Duty Ball Bearing Live Center. This industrial strength, 11/2 lb. live center features double 11/2" bearings for long life even under the heaviest loads. 60° cone for general work, #2 Morse taper. 145077 .......................................................$59.39 (B) 1/2" Keyed Chucks. Inserted in the tailstock, these keyed chucks allow your lathe to work like a small horizontal drill press. Holds Forstner bits, spade bits or twist bits with shanks up to 1/2" for boring out lamps, boxes, vases, depth holes in bowl blanks and more. #1 or #2 Morse taper. 142552 #1 MT (shown)...............................$36.99 142553 #2 MT . ..........................................$36.99 (C) WoodRiver®® Keyless Chuck. Inserted in the tailstock, a drill chuck allows your lathe to work like a small horizontal drill press. Use this drill chuck to hold forstner bits, C brad-point bits or twist bits. A keyless chuck significantly reduces time to change bits. Black oxide finish with knurled barrel and collar for a sure-grip, includes JT33 to #2 Morse Taper adapter spindle for use in lathes with #2MT. Accepts bit shanks from 1/32" to 1/2". This JT33 keyless chuck can also be used on many drill presses. 150785 #2 MT . ..........................................$39.99

BEALL Spindle Taps

Now you can make all the glue face plates and jam chucks you want without ever having to mount blocks on your metal faceplates again! These taps are machined in lathe spindle sizes so that after you have drilled and tapped a wooded block, you simply mount the block directly onto your lathe. The tapped block can then be put to use in a special faceplate, vacuum fixture or other mounting assembly. Instructions included. 147816 1" x 8 TPI . ......................................$17.99 147817 11/4" x 8 TPI ..................................$26.99

WoodRiver®® Turner’s Collet Chuck

Collet chucks are preferred by woodturners for holding small pieces for turning because the collets grip tight enough to easily hold your work, but with little or no marring. Our chuck is built to machinist tolerances and uses interchangeable collets to grip round tenons. The collets, which work just like the chuck in your router, grip with even pressure completely around the tenon on your workpiece. Includes eight collets which range from 1/8" to 3/8" and 1/2" to 5/8" by 16ths, collet chuck with #2 Morse taper and chuck wrench in a fitted case. 146110 .......................................................$85.99

Helping You Make Wood Work ®

75


Woodturning ONEWAY Stronghold Chuck Kit

Pro Live Center Set

These high-quality live centers feature double bearing construction and precise machining for minimum vibration and long life. A rare earth magnet set into the body securely holds the interchangeable centers in place. Set includes 9/16" cup center, 5/8" to 1/4" tapered cup, 3/4" and extended 7/16" cone center, 1/ " cup center with point, and 1/ " cup center with 2 2 removable 5/16" guide pin. Come complete with form-fitted case. 142772 #1 MT pro set...............................$66.50 142771 #2 MT pro set...............................$66.50

WoodRiver®® Multi Tooth Drive Centers

The multiple drive teeth and springloaded center point benefit both novice and experienced turners. The spring-loaded center point holds your workpiece exactly where you want it, then retracts as tailstock pressure is increased. This keeps the point from drifting with the grain or splitting the workpiece. Because the center retracts, less pressure is needed to engage the teeth, especially helpful in hard woods where a traditional center would have to be driven in to engage the spurs. The Insert version is designed to be held in the jaws or most lathe chucks so you can switch back and forth between bowl and spindle work without removing your chuck. 149173 1" dia. #2 MT................................$19.99 149174 5/8" dia. #2 MT..............................$19.99 149175 1" dia. chuck insert......................$16.99

Deluxe Drive Centers

have sharp spurs for superior bite to help keep even difficult workpieces from tearing out and slipping. The center point is spring loaded so it holds the workpiece in position until the spurs engage, then retracts to prevent splitting your work as it is advanced into the spurs. 149170 1" dia. #2 MT.................$17.99 149171 5/8" dia. #2 MT...............$17.99 149172 5/8" dia. #1 MT...............$17.99

WoodRiver®® 60° Cone Live Centers

These heavy-duty ball bearing centers can also be used for holding a workpiece with a hole from 1/8" to 11/8" diameter. 149168 #2 MT . ......................$19.99 149169 #1 MT.........................$19.99

NOVA Soft Jaws

Now you will no longer have to match your project to a fixed dimension jaw set! Instead, you can quickly and easily design one of kind jaw sets to fit your special project needs. This new jaw set consists of 4 segments of high quality soft nylon which can be turned, sawn, drilled or tapped. The 1" thickness provides plenty of room to turn special profiles for holding pieces which would be difficult or impossible with standard jaws. Outside jaw dia. (closed) is 4.7". Fits all NOVA chucks. 148043 ........................................................$17.99

76

Never again will you feel like you need three hands to tighten your workpiece in a woodturning chuck! Using a unique chuck and key system, the Stronghold allows you to hold your workpiece in one hand and tighten/loosen the chuck jaws with the other! In addition to one-handed key operation, this chuck offers the finest engineering and the most precise machining we have seen. With the capacity to hold a wide range of stock shapes and sizes, this 8-pound geared scroll chuck features a design developed by turning professionals and built to stand up under the most demanding turning operations. The heavy-duty 41/2" diameter body helps dampen rough stock turning vibrations while providing a powerful, secure grip. Other features like a nickel-plated scroll body, taper lock bushings for left or right hand use, and profiled “step” jaws for superior gripping of round or square stock all add up to make this the professionals choice. Stronghold kit includes: 1/2" x 11/2" RH jumbo wood worm screw; #2 jaw set (grips round stock from 13/4" to 3", square stock from 13/8" to 3", and expands into dovetail recesses from 21/2" to 4"), operating key, hex screws, T-handle hex wrench, removeable threaded adapter and instruction booklet. Canada. 124360 3/4" x 16 TPI................................ $299.99 124363 11/4" x 8 TPI................................ $299.99 124361 5/8" plain..................................... $299.99 124364 11/2" x 8 TPI................................ $299.99 124362 1" x 8 TPI.................................... $299.99 Stronghold Threaded Adapters allow maximum versatility! Each Stronghold Chuck has a removable threaded adapter. By removing your existing adapter, and installing one with a different thread pattern, you can use your Stronghold Chuck on a different lathe! 124343 3/4" x 16 TPI....................................$32.99 124344 5/8" plain.........................................$32.99 124345 1" x 8 TPI........................................$32.99 124346 11/4" x 8 TPI....................................$32.99 124347 11/2" x 8 TPI....................................$32.99 (A) #1 Jaws for holding small work. Grips round or square stock from 1/2" to 2", expands in dovetail recesses from 11/8" to 25/8". 124348 ......................................................$49.99 (B) #3 Jaws for bowls, vessels and platters. Designed for strength, these jaws are built to handle “large”

turnings. Grips round C or square B stock from 31/2" to 51/2" in diameter, or expands A into dovetail 1 recesses from 4 /2" to 6" in diameter. 124350 ......................................................$54.99 Jumbo Jaws. Designed to re-chuck bowls and plates up to 12" in diameter for complete “bottom finishing”. The 8 rubber grippers cushion and hold your workpiece during light finish turning and sanding operations. (Not shown). 124351 ....................................................$104.99 813763 set of extra rubber grippers.........$26.99

TEKNATOOL SuperNova2 Woodturning Chucks

Threaded Body Inserts compatible with Nova Chucks only: 15M76   1" - 8 RH thread............................$23.99 142434   1" - 8 R&L thread..........................$22.99 15M78   3/4" - 16 RH thread........................$22.99 15M79   1" - 12 RH thread..........................$22.99 126601   11/4" - 8 RH thread.......................$23.99 15M80   5/8" plain........................................$23.99 15M81   7/8" - 14 RH thread........................$22.99 15M82   blank insert...................................$21.99 (B) Cole Jaw Set. These versatile jaws of sturdy 3/8" thick cast- B aluminum with a 10" diameter have the same basic configuration as the smaller 50mm units and can expand into a 33/4"- 45/8" dovetailed recess, or clamp the outside of a turned dovetailed foot 35/16"-41/8" in diam. Space the 8 rubber stoppers in any of 8 diameter positions on the face of the plates to finish the bottom of a bowl up to 10" in diam. For larger bowls the stoppers may grip from the inside as the chuck expands outward. 15M83 (B)..................................................... $79.99 15M94 8 extra stops & screws.................... $10.99 Mini Cole Jaw Set Same as the Standard set, but sized for mini-lathes. Minimal 8" dia., opens to 10". 144857 . .......................................................$59.99

The newest evolution of the classic Nova Chuck is finally available – the S u p e r N o v a 2! T h e nickel-plated body is made from high- grade K1045 steel machined to allow closer tolerances. Its patented gearing system delivers incredible gripping power and is over a third faster than the A original SuperNova. With SuperNova2 gripping power you’ll be turning longer, more delicate stems. Large, rough and uneven work that you couldn’t handle before can now be turned with greater security. The SuperNova2² requires only one hand to operate using a ball-nosed Allen key with a large easy-grip handle (included). It’s quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova2² has a fully- sealed heavy-duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24-division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova2²! The unique and user-friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 37/8", depth is 33/8", weight is 51/2 lbs. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe. 145898 (A)................................................$189.99

Credit Card Orders: 800 225-1153

Additional Nova Accessories (not shown). Screw Chuck for Cole Jaws. Use while the Cole Jaws are still attached! About 13/4" long. RH thread. 15M93 ....................................................... $14.99 Woodworm Screw Chuck. 19mm (3/4") long, RH. 15M85 ....................................................... $17.99 Jaw Fastening Spares Kit - 8 extra screws, 2 Allen wrenches. 15M87 ...................................................... $11.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Woodturning

NOVA Accessories

Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2, and Nova Titan chucks. Each set is precision-machined from a high quality solid steel billet and comes with an easy-to-read instruction manual. Choose a set to match your project! The 25mm to 130mm Jaw A Sets are all similar to “A” in the photo. 25mm Jaw Set substitutes for the standard 50mm jaws for use on small work with 3/8"-11/4" spigots, as a type of pin chuck with 1" capacity, for expanding dovetail work on bowls up to 6" diameter or for 1/2"-1" square blanks. 15M86 . ....................................................... $39.99 35mm Bowl Jaw Set. These 35mm dovetailed jaws fit perfectly into the current jaw range, picking up a small gap left between the 25mm and 50mm jaw sets. Even though these jaws are small, they are still capable of firmly holding medium-sized bowls with small bases. 146214. ...........................$39.99 50mm Jaw Set. The 50mm jaw set will accommodate a bowl up to 12" in diameter. This is the standard jaw set included with Precision Midi and SuperNova2 chucks. 128603 ....................................................... $47.99 (A) 100mm Jaw Set. Expanding dovetail jaws hold bowls up to 14" diameter, contracting jaws grip spigots and bowl feet up to 31/2" diameter or square billets from 29/16" to 31/8". 15M91. . .......................................................$49.99 130mm Jumbo Jaws for holding large bowls and platters. Primarily designed for work over 16" in diameter up to a maximum of 291/2". Jaws will grip spigots from 4.2" to 5" and expand into dovetailed recesses from 4.88" to 5.86". Fits SuperNova2 and Titan chucks only. 126358 .......................................................$54.99

NOVA G3 Chuck

This is a great little gearedaction chuck, with powerful performance for its size and built to the same standards as the SuperNova² and Titan chucks! Designed for mini, midi and smaller lathes with up to a 14" diameter swing, this chuck’s small size and weight minimizes the load on smaller spindles and bearings. The G3 accepts all of Teknatool’s accessory jaws, although only those designed for smaller work are recommended. This chuck also includes an automatic jaw safety stop to keep the jaw slides from falling out. Teknatool also makes the jaw slides from iron composite impregnated with copper, which has outstanding qualities as an anti-seize and low-friction agent. Using the standard 50mm jaws (included) this chuck will handle up to 14" diameter bowls and turnings with up to a 6" length spigot. Chuck body is approximately 33/8" diameter, depth is 13/4" and 3 lbs. on the lathe spindle. Includes chuck body, woodworm screw, 50mm jaws, T-handled chuck key, manual and fasteners. Available without a threaded insert for turners who already own Nova chucks with removable inserts, or with your choice of the three most popular inserts. 147016 G3 without threaded insert........$149.99 147017 G3 with 1" x 8 TPI........................$144.99 147018 G3 with 3/4" x 16 TPI....................$144.99 147019 G3 with 11/4" x 8TPI.....................$144.99 150306 Nova 4-pc. Mini Jaw Set...............$99.99

F

B

D

G H

C (B) Step Jaws have three different dovetailed steps for optimum gripping of E bowl feet from 15/8" to 31/4" diameter. Outside expanding dovetail fits a recess 3" to 4" dia. for bowls and platters up to 12". 15M92 ...................................................... $49.99 (C) Spigot Jaw Sets are heavy section jaws with a powerful grip for spigot (tenon) turning. With 30mm (11/8") depth and a special serrated tooth form, these jaws really hang on to your workpiece. For work where a long overhang is needed or hollowing into endgrain, these jaws provide superior gripping power. 15N81 35mm...............................................$44.99 15N82 45mm...............................................$49.99 SuperNova PowerGrip Jaws. For SuperNova, SuperNova2 and Titan Chucks. 128178 .......................................................$59.99 (D) Nova Chuck Spur Drive Center. This four-spur center was designed to be secured in the chuck by the standard 50 mm jaws. 111190 ........................................................ $17.99 (E) Face Plate Rings - when you want an extra-solid grip on your work. Designed to secure onto the external dovetails of the accessory jaws, Faceplate Rings come in three sizes for use on the following popular

WoodRiver® Turning Chuck

The self-centering 4-jaw chuck features a wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2"-3" dovetailed recess in the base of your turning. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1 5/8" and 23/4" or square billets 11/8" to 21/8" in size. No disassembly or accessories are required to use the accompanying screw chuck which has a 11/8" long right hand thread. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Comes complete with screw center, locking levers, T-handled hex wrench for jaw screws and 8 extra jaw screws, in a plastic fitted storage case.

accessory jaws: 50mm, 100mm, and 130mm. 144860 50 MM faceplate ring...................$29.99 144859 100 MM faceplate ring.................$39.99 144858 130 MM faceplate ring.................$49.99 (F) Long Nose Jaw Set. With an internal dovetail and threaded serrations, this new jaw has a superior grip in the spigot mode – ideal for holding larger and longer tenons. The extra-long nose is invaluable when working near the bottom of a bowl, allowing extra distance between chuck and workpiece. Fits all Nova Chucks. 146083 .......................................................$64.99 (G) 75mm Bowl Jaw Set fits Precision Midi, SuperNova² and Nova Titan as well as the old Nova and SuperNova Chucks. The 75mm jaw sets are designed for an expanded dovetail grip, reverse dovetail grip for gripping footed bowls, limited spigot facility and provision to mount false wooden jaws, so customized jaws can be made for special purposes. 146082 .......................................................$59.99 (H) Nova Pin Jaws operate like a pin chuck but without the hassles! An extended 20mm (.79") cylindrical jaw expands into a 25mm (1") or larger hole and grips the workpiece like a traditional pin chuck. Jaws can also be used as compression mode spigot jaws. 123548 .......................................................$54.99

146800 3/4" x 16 TPI....................................$86.50  146801 1" x 8 TPI....................................... $86.50 146802 11/4" x 8 TPI....................................$86.50 Threaded Inserts are available for those who want to use the same chuck on lathes with different thread patterns. Inserts compatible with WoodRiver® Turning Chuck only. 146797 3/4" x 16 TPI insert........................... $5.99 146798 1" x 8 TPI insert............................... $5.99 146799 11/4" x 8 TPI insert........................... $5.99 #1 Jaws for smaller work. Holds stock from 3/ " to 13/ " inside and 11/ " to 21/ " outside. 8 8 16 16 Jaw length is 1". 146804 .......................................................$20.99 #3 Jaws for larger bowls and platters. Holds stock from 31/4" to 41/4" inside and 313/16" to 413/16" outside. 146805 .......................................................$34.99 15M94 8 extra stops & screws.................... $10.99 Large Flat Jaws make it easy to finish the bottom of plates and bowls. Grips outer edge of stock from 17/8" to 8" in diameter. 146806 .......................................................$25.50 Extra Jaw Screws, package of 8. 146803 ......................................................... $2.50

Helping You Make Wood Work ®

77


Marking & Measuring CROWN Rosewood And Brass Marking Set

B

A

Marking And Cutting Gauges

(A) Rosewood Marking Gauge performs two operations. One side of its posts has a single pin for general marking with the grain or on end grain; its other side has double pins adjustable to approximately 2" for layout of mortises. Made with solid brass hardware, wear plates, and fitted with milled thumb screw in head. Overall length 73/4". 145464 . .................................................. $48.99 (B) Rosewood Cutting Gauge is designed for accurate scoring across the grain without tearing. The 1/ " single-beveled cutting iron is held in place by 4 a brass wedge, and a brass thumbscrew grips the sliding post securely. Solid rosewood fence has two inlaid brass wear plates. Overall length 8". 145465 . ................................................. $34.99

We’ve combined the beauty and reliability of imported rosewood and solid brass with three classic bench tools. Try Squares have blued steel blades triple-pinned to their handles. A 1/8" thick brass rub plate protects inside face for accurate readings. 101/2" Bevel with sliding steel blade can be easily secured at any angle by a brass thumb lever. Marking Gauge features an adjusting pull slide for fast layout of mortises. Rosewood post has double steel pins on slide face and a single pin on the reverse face. Rosewood fence has brass wear plates and set knob. Set of 3 includes marking gauge, 101/2" sliding bevel, and 6" try square. 14C50 set of 3 Save Over $15! ..........$79.99 Also available individually. 14C41 marking gauge........................... $38.99 07F87 4" sliding bevel............................$19.99

PFEIL Swiss Made Marking Knives Marking knives A

A-LINE-IT Systems

Quickly setup, tune up, and check the accuracy of your shop’s tools with these systems. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/ chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, outfeed table alignment; router/shaper spindle run-out, or any other set-up or alignment measurement you desire. A-LINE-IT Basic Kit is the perfect for hobbyists and small shops. Each kit contains a 3/4" x 3/4" x 51/2" dial indicator mounting bar, 3/8" x 3/4" x 61/4" miter groove bar with leveling screws and spring plungers for a perfect fit in your miter slot, dial indicator, hardware and hex wrench for assembly, and an instructional DVD. The A-LINE-IT Deluxe Kit includes all of the above but features an 11" long dial indicator mounting bar instead of the 51/2" bar, a planer bar, a precision 1/2" x 33/8" pin for drill press and router tests, special spring and arbor nut to test saw blade and arbor run out, 22-piece tip set for the dial indicator to meet any application, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines. 148719 basic kit....................................... $79.99 148720 deluxe kit.................................. $144.99

are the most accurate way to mark lines for fine joinery layout work. The B flat steel blades on these knives are beveled on only one side so you can mark tight against your straight edge. These knives feature a K720 steel blade with a beautiful Bubinga handle that fits snug in your hand for easy gripping and control. Blade is 3/4" wide and 17/8" long; overall length is 6". 05E72 (A) right hand................................... $27.50 05E73 (B) left hand..................................... $27.50 05E74 set of two, save over $10................$44.99

WoodRiver® Woodworker’s Pencil

This unique pencil with extra thick (5.66mm, about 7/ " D x 3 1/ "L) HB round lead is held firmly in place 32 8

Made in England 143016 144563 14C33 14C15 14C11 14C19

101/2" sliding bevel.................... $30.99 12" sliding bevel........................ $39.99 3" try square................................ $17.99 4" try square............................... $20.99 6" try square.............................. $25.99 9" try square...............................$27.99

PFEIL Swiss Made Marking Knife Kit

These beautiful Swiss made marking tools are perfect for all your joinery layout work. Features a K720 steel blade with a 60° ground point that allows the knife to be used left- or right-handed. The round Bubinga handle with two small flats, to prevent the tool from rolling on your benchtop, fits in the hand like a pencil for accurate marking. Small blade -13/8" x 1/2", large blade-11/2" x 3/4", 7" overall length. 05Z25 lg. blade w/handle 11/2" x 3/4"......$19.99 05B47 sm. blade w/handle, 13/8" x 1/2"....$17.99 05B46 set of two blades only............................... save over $10................................$24.99

by a four-jaw collet. Unscrew the top to access an internal sharpener. Comes with HB (hard) lead. 146807 ..................................................... $15.99 146769 4B soft lead (2)..............................$1.50 146770 HB hard lead (2).............................$1.50 147263 colored lead assort.......................$4.99

Loose Leg Wing Dividers

For scribing circles, arcs, and stepping out equal distances in odd measurements. Includes one fixed leg and a hardened removable point that can be replaced with a pencil. The 6" divider has 81/2" scribing capacity, the 8" model has 131/4". 06C21 6"..........................................................................................$66.99 06C22 8"..........................................................................................$71.50

Wing Dividers

Make more accurate scribes or layouts. The tips of these heavy-duty scribes are precision ground for accuracy and finished with black epoxy coating for durability. The 6" divider has 8" scribing capacity, the 8" has 101/2", and the 16" has 22". 148053 6"...................................................................................... $15.99 148054 8"...................................................................................... $24.99 148055 16".....................................................................................$47.29

FASTCAP AccuScribePRO

10" Metal Sliding Bevel

This high-quality Japanese sliding bevel sets with a twist of a rear-locking screw. The rear locking screw also allows you to lay the bevel flat on either side. The heavy 10" blade is mounted in an aluminum handle. 146020 . ................................................... $24.50

78

The Accuscribe Pro makes it easy to maintain a consistent scribe offset while remaining parallel to the object surface every time. The non-rocking base provides stability, and the articulating pencil head adjusts to accommodate difficult and awkward scribing applications such as scribing around windows and doors. Also ideal for scribing the trim strip on kitchen cabinets, architectural moldings, tile, countertops, splash guards, and even flooring. Includes an oversized thumb screw, a convenient built-in pencil sharpener, and a removable compass point with its own storage clip. 147402 . ...................................................................................................................... $17.99

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Marking & Measuring PROFESSIONAL QUALITY TOOLS

PINNACLE® Precision T-Squares

Drawing straight, accurate lines can be challenging when only relying on a tape measure and a questionable straight edge. Each T-Square is an accurately machined, anodized, and laser-engraved aluminum beam featuring rules along both edges graduated in 1/ " increments and precisely spaced 1mm holes 32 every 1/16". Need to mark a cut line 67/16" in from the edge of a panel? Just place your pencil in the 67/16" hole, slide the “T” along the edge and you’re done! Additional holes are machined on exact 1" centers for marking shelf pin locations. Accurate to .001" and guaranteed for life, each T-Square comes in an MDF fitted, wall-mountable storage case. Pinnacle tools are available exclusively at Woodcraft. USA. 147631 12" T-square................................$79.99 147632 24" T-square............................. $109.99 148484 32" T-square............................. $129.99

PINNACLE® Precision Steel Straight Edge

Most straight edges guarantee an accuracy of .001" per inch. As a woodworker, this may sound acceptable, but when you consider that this level of accuracy results in an error of approximately 1/16" (.048") at the end of a 48" straight edge, .001" per inch isn’t as good as it sounds. Pinnacle Precision Straight Edges offer an accuracy of better than .001" per foot, which means the error over the length of the 48" straight edge is less than 1/256". Now that’s accurate! Accuracies at this level really become important when setting up your table saw wings or jointer and planer infeed and outfeed tables. Pinnacle straight edges start out as a slab of hot roll steel, go through a stress-relieving heat treat process, are carefully ground on a massive surface grinder to extreme tolerances, and then finger slots are cut to improve handling. Finally, each precision tool is inspected on a certified granite surface plate to ensure its straightness. Both the 24" and 48" are 1/4" thick x 23/8" wide and comes with a wallmountable MDF case. Pinnacle tools are available exclusively at Woodcraft. Made in USA. 147859 24" steel straight edge.............. $89.99 147860 48" steel straight edge............ $189.99

B C D PINNACLE® Woodworking Rules

A

The laser-engraved markings are more accurate than printed or stamped scales, they’re straighter, heavier and lay flat because of the recess down the center of the bottom surface. Other features include both a standard and a center scale so you don’t have to switch rules with edges beveled at 30° so the scales are easy to align with pencil marks. Made in the USA. 148975 (A) 6" Pinnacle® rule..................... $13.99 148976 (B) 12" Pinnacle® rule................... $20.99 148977 (C) 24" Pinnacle® rule................... $31.99 148978 (D) 36" Pinnacle® rule.................. $42.99

PINNACLE® Precision Square

The accuracy of our machined aluminum square is better than .001" over the entire 8" x 12" size. Both the blade and base are machined from a single aluminum block which results in a more accurate square than one using a two-piece blade and base design. The handle and the square are assembled together using two chrome hardened steel pins for rigidity and alignment. The square is anodized for durability, with laser-engraved inch scale markings for general marking and measuring. Includes a custom-fitted wooden MDF case for storage. Pinnacle tools are available exclusively at Woodcraft. USA. 147630 . ......................................................$79.99

PINNACLE® Precision Triangle Set

Serves as both a square and a 45° miter. The pocket-sized triangle is perfect squaring the inside of boxes and drawers. Both the 4 1/2 " and 6 1/4 " triangles in the Pinnacle Precision Triangle Set are manufactured from anodized aluminum and are guaranteed in perpendicular accuracy to within .001". Both sides are laser engraved with inch markings, graduated in 16ths. The set comes in a fitted MDF wall-mountable case for storage. Pinnacle tools are available exclusively at Woodcraft. USA. 147623 . ......................................................$44.99

PINNACLE® Stainless Steel Gauge Block

Square your saw blades, drill bits and bandsaw blades to your tables with this 13/4" Stainless Steel Gauge Block Milled from solid stainless steel stock on CNC machinery accurate to .0002" this tool is also quite useful when squaring small box-size drawers during assembly. Carry in your pocket or store it in the custom-fitted MDF tray. Pinnacle tools are available exclusively at Woodcraft. USA. 147629 . ......................................................$27.99

PINNACLE®® 12" Precision Triangle

No square can compare to the rigidity of a triangle. The triangle serves as a square and a 45° miter. Each 12" triangle is machined from solid aircraft-grade aluminum plate, anodized and laser-engraved with accurate inch scales along the right-angle legs and a centering scale on the long leg, both graduated in 16ths. Comes in a fitted MDF wall-mountable case for safe and convenient storage. Pinnacle tools are available exclusively at Woodcraft. Made in USA. 148368 . ..................................................... $69.99

PINNACLE® 24" Precision Straight Edge Rule

Combines two of the more important measuring and layout tools a reliable straight edge and an accurate rule. Each inch and fractional marking is laser engraved to a positioning tolerance of .0002". Unlike a common tape measure, you will never question the accuracy of this ruler. Both edges are precision-milled for true parallel and reliable straightness. Comes in a fitted MDF wall-mountable case for safe and convenient storage. Pinnacle tools are available exclusively at Woodcraft. USA. 150760 12"...............................................$19.99 147624 24"................................................$44.99 150737 36"...............................................$59.99

WIXEY Digital Protractor

Get quick, accurate measurements of existing angles from mitered trim work, crown molding, roof slopes, or wall corners. This tool helps measurethe true angle of inside and outside wall corners molding and chair rail miter joints. Large display reads angles from 0 to 180°, and can be zeroed at any point in the swing of the protractor's leg - just read the angle measurement directly from the digital protractor. Each 9" long x 2" wide aluminum leg has built-in magnets to help hold the protractor to metal surfaces. 148564 . ...................................................... $59.99

ROTAPE Beam Compass

This compact, self-measuring compass draws circles or arcs with a 3 1/2" to 72" radius. Just set the tape at the desired radius, locate the center point and draw your arc or circle. The positive locking tape retracts into the compass body like a tape measure. Rotape also works as a straight-line marking gauge. 141871 . ..................................................... $29.99

Helping You Make Wood Work ®

79


Marking & Measuring

Plastic Profile Copy Gauges

Reproduce any furniture trim or moulding profile to form an accurate template for tracing and cutting. An excellent alternative to wire models, these gauges are made of durable plastic. Fingers measure 1/16" W x 3/4" H x 4" L, and will not fall out or cross over each other. Copies shapes up to 13/4" deep. Two or more may be connected together for reproducing shapes longer than an individual copy gauge. 144814 standard 5" width.......................... $9.50 144815 large 10" width............................. $16.50

French Curve Set

Includes four of the most popular curves used in drawing. Made of transparent acrylic plexiglass with smooth uniform edges that will not warp. Set of four, .060" thick. 01P11 set of 4............................................... $9.99

WoodRiver® Set-Up Block Set

Quickly set up critical bit or blade measurements on your router, table saw, or drill press with this high-quality steel set-up block set. The set features 5 precision 2" long blocks (1/16", 1/8", 1/4", 1/2", and 3/ " thick) and a 1"-2"-3" block. By using combinations 4 of the 2" long blocks and the 1-2-3 block you can easily make perfect, repeatable set-ups. Furnished in a plactic storage case to protect their accuracy. Precision ground to +/-.0002". 148454 . ...................................................... $31.99

Self-Stick Tape Rules

Precision steel, ready to mount on table saws, work benches, sewing tables, lathe beds or wherever you constantly need to check measurements. 1/2" wide tapes can be easily cut to shorter lengths. In 6' and 12' lengths reading left-to-right (illustrated) or right-to-left to meet your shop needs. 08Y41 6' L-R..............................................$10.50 08Y42 6' R-L..............................................$10.50 08Y40 6' L-R & R-L, set of 2.....................$18.50 08W12 12' L-R........................................... $12.50 08W13 12' R-L........................................... $12.50 08W10 12' L-R & R-L, set of 2....................$21.99

WOODCRAFT Rules

High Precision And Reliability For A Lifetime Of Accurate Measuring. These steel rules have been heat-treated and tempered to stand up to rugged use. Finished in a satin chrome so the precise graduations, photochemically etched and black-filled, are easy to read. Made in the U.S.A., these rules meet official Federal specifications for accuracy. 6" Pocket Rule. Rigid, 3/4" wide, .040" thick, with 1/ mm increments one side, 1/ " on the other, reads 2 32 left-to-right and right-to-left. 1/32" end graduations. 129207 . ..................................................... $12.50 12" Bench Rule. Use this reliable tool for serious bench measurements. 1" wide rigid rule, .040" thick, with 1/32" and 1/64" on one side, 1mm on the other. 129208 .......................................................$24.99 24" Shop Rule. For longer measurements where measurements with a 12" rule might impact accuracy. Rigid, 13/16" wide, .040" thick, 1/64" on one side, 1/2 mm on the other. 129209 .......................................................$40.99 Woodworker’s Ruler Set. Our most popular 6", 12", and 24" rules. 129215  set of 3 Save Over $8! .............$69.99 36" Shop Rule. Rigid, 15/32" wide, .040" thick rule is graduated in 1/­32" and 1/64" on one side and 1/8" and 1/16" on the other. 129212 . .......................................................$77.99 24" Precision Straight Edge. Perfect for layout, checking the flatness of planes, power tool table tops, and the setting of jointers. 11/2" wide, .080" thick, with a .002" tolerance over the length of the blade. 129211 . ......................................................$40.99 WOODCRAFT Hook Rules allow exact measurements from ends or edges without struggling to see both ends of your rule at the same time.

B

Router And Saw Depth Gauges

These aluminum gauges make saw or router set- up fast and easy. Just set the gauge across your blade or cutter and adjust to the required setting. Both are clearly marked in inches (both fractional and decimal) and millimeters. The Router Depth Gauge is designed for setting cutter depths from 1/16" to 11/2" in 1/16" increments. The Saw Depth Gauge can be used to set blades on radial arm, hand-held circular and table saws from 1/8" to 2" in 1/8" increments. 143294 router depth gauge........................$8.99 143295 saw depth gauge...........................$8.99 03K17 set of 2 Save Over $2! . ........... $14.99

A Center Finding Rules

Eliminate guesswork, math and the use of dividers. To find center, simply align the rule so the same measurement appears to the left of the “0” mark as appears to the right of the mark. The arrow will point to the exact center. Available in 12" and 24" lengths. Aluminum rules are 13/4" wide, stainless are 11/4". 123022 (B) 12" stainless.......................... $11.99 123041 (B) 24" stainless...........................$12.99

WoodRiver® Stainless Steel Cabinetmaker’s Rules

These high-quality rulers are also an excellent value. They are made of hardened stainless steel with deeply engraved graduations. The finest graduations are in 64th’s and .5mm’s. The rear face displays an inch to metric and fraction to decimal

80

Credit Card Orders: 800 225-1153

6" Hook Rule. Rigid, 3/4" wide and .040" thick, with increments one side, 1/32" on the other. 128292 .......................................................$15.99 12" Hook Rule. Rigid, 1" wide and .040" thick, with 1/ mm increments one side, 1/ " on the other. 2 32 129213 ........................................................ $35.99 24" Hook Rule. Rigid, 13/16" wide .040" thick rule, graduated in 1/64" on one side and 1/2mm on the other. 129214 . ..................................................... $53.99 1/ mm 2

conversion table. 140655 6" (150mm)..................................... $3.99 140656 12" (300mm).................................. $8.99 140659 24" (600mm)................................$14.50 140657 40" (1000mm)..............................$25.50 140658 set of 4 Save over $8! ............... $44.97

Free Technical Advice: 800 535-4486

www.woodcraft.com


Marking & Measuring 6" Fractional Digital Caliper

C A B

STARRETT Measuring Tools

Feature unerring American-made precision and durability. Their century-old dedication to producing only the highest quality tools has earned them the welldeserved title of “the world’s greatest toolmakers”. Measuring tools have working surfaces ground to a demanding ±.00001". Rules are made of engraved, hardened, premium-quality steel finished with an easy-to-read satin chrome surface. (A) Combination Squares. Each model features a machine divided, tempered steel rule and precisionground head with 90° and 45° faces. A hardened scriber and spirit level are included in the 12" and 6" models. All rules are marked with 1/64, 1/32, 1/16, and 1/8 inch graduations. Center & Protractor heads are not included with square (see below). 06R12 12" square only..............................$82.99 06L21 6" square only................................$79.99 06R19 4" square with center head........$114.99 Center Heads locate the center point of round or square stock, or layout 45° angles. 06L11 for 12" square................................ $37.50 Protractor Head. For 12" square only. Locking protractor featuring a spirit level and double graduations reading 0°- 180°. 06R16 . ......................................................$89.99 Extended Length Rule. Expand the capacity of your 12" square by changing to a 24" rule. 06R18 24"............................................... $109.99

D

(B) Combination Tool. This versatile builder’s tool incorporates seven useful tools in one: rule, square, level, protractor, bevel, pitch-to-foot indicator, and plumb. It’s especially convenient for laying out complicated work that would otherwise require lengthy calculations. One side of the turret has a double graduation from 0° to 90°; the reverse side is graduated in 1/2" increments from 0 to 12" per foot pitch. The stock has four levels. Rule length is 24". This is the tool professionals rely on for accuracy. 06G11 . ....................................................$419.99 (C) Double Squares are as accurate as engineers squares and as adjustable as combination squares. They’re the perfect small-size tools for checking or setting 90° angles. Graduated rules are of hardened steel with precision-machined stocks. 6" size includes a spirit level. 06E43 21/2"................................................$89.99 06E44 4"....................................................$59.99 07F11 6"....................................................$79.99 (D) Stair Gauge Fixtures. Clamp a pair to a carpenter’s framing square and you have the perfect gauge for laying out stair stringers, rafters, hexagons and other challenging cuts. With a full 13/4" of bearing surface, these generous-sized fixtures are more dependable and easier to use than smaller types. Nickle-plated steel. Supplied in pairs. 06R14 . ......................................................$39.99

Machinist’s Protractor

Setting angles was never this elegant, or accurate. Machined stainless steel protractor features an 111/2" long bar with 27/8" diameter dial. Markings are in minutes and degrees with a magnifying screen to increase ease of use and accuracy. Easy rotating dial fits on bar quickly, and goes right to work. Locking and micro adjusting knobs are knurled for ease of use. Ideal for machine and jig setup where accuracy is essential. Includes a foam-lined, molded plastic case. 143964 .................................................... $55.99

D

C A B

PINNACLE® Combination Square

One of the most valuable tools in any shop is the combination square. The problem is that most shop combo squares are cheaply made, and inaccurate. Enter the Pinnacle 12" combination square, a Madein-the-USA tool, with a 12" stainless steel blade that is graduated in 8ths and 16ths on one side and 16ths and 32nds on the other and accurate to within +/- .003" between any two graduations, and +.006/-.004" from 0 to any graduation. The blade graduations are micro-fine etched with the finest grey iron castings for high contrast and the cast-iron heads are coated with a Hammertone Black Powder Coat finish. The square head is

Take accurate digital readings in millimeters, inches or fractions at the touch of the function button. The large, easy-toread, 1/2 " x 1 1/4" LCD screen displays measurements in .0005", .01mm, or 1/64" resolutions. Make inside, outside and depth measurements to 6". Features include auto power off, zero setting at any position, extra battery and case. 147828 . ..................................................... $33.50

WIXEY Dual Display Fractional Digital Calipers

These are the ONLY fractional calipers available that display both the fraction and the decimal equivalent AT THE SAME TIME! Because other fractional digital calipers round up or down to the nearest fraction, you never know if you are exactly on your fractional measurement. The only way to ensure 100% accuracy is by toggling back and forth between the fractional display and the decimal display. With these calipers you can read the fraction and the decimal equivalent at the same time so you know that 1/2" is exactly .5", not .51" or .49". Constructed of high-quality hardened and ground stainless steel components with a large easy-to-see display which reads in inches with fractions or millimeters. The precision-ground measuring faces allow for outside, inside, depth and step measurements. The extremely accurate fraction readouts are displayed using “Precise Fraction Technology” which gives with decimal inches displayed in .001" increments and the millimeters in .01mm increments. 147829 . ..................................................... $39.99

WoodRiver ® Fractional Dial Caliper

It didn’t exist so we had it made for us! One turn of the dial equals an inch, a feature that no other dial caliper has. Measures to 61/2", calibrated in 64th’s of an inch. Caliper is machined from hardened stainless steel for long life, dial indicator is shockproofed. Comes in a foam-padded molded plastic case. 143963 .............................. $51.99

accurate to +/- .005" and comes with a level vial and stainless steel scribe tool. Three-piece set includes 12" blade, square head and center finder in a blow-molded case. 149872 (A) 12" combo square 3-pc. set....$44.99 149873 24" blade.......................................$54.99 149874 (D) 12" half-body protractor..........$42.99 04P56 (B) 4" double square.....................$34.99 04P57 (C) 6" double square.....................$39.99 PINNACLE® 4-Piece Set Set includes the three-piece set plus 12" half-body protractor body. 149895 . .......................................................$77.95

Helping You Make Wood Work ®

81


Marking & Measuring

GRÖZ Engineer’s Squares

These all steel, precision squares are handy for setting up table saw blades, jointer fences, and other machine tools where accuracy is a must. They are also superb for marking out wooden joints or checking cut stock. All surfaces and edges are ground for straightness and parallelism and the squares are accurate on both inside and outside edges (not always the case with wooden body squares). No graduations appear on the blades. Set of three comes in a plastic storage case. 141013 2" blade.......................................$14.29 141014 4" blade.......................................$15.39 141015 6" blade.......................................$19.99 148041 set of 3 Best Value - Save $5... $43.99

Starrett®® Tempered Steel Rafter Square RS-24

Starrett tools high standards of quality and workmanship show in this solid one-piece construction rafter square. The body is 24" long and 2" wide and the tongue 16" long and 11/2" wide, and square with the body. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" on the back side. Black enamel finish with white printed graduations and information. 149894 . ......................................................$14.99

PINNACLE® Story Sticks

A traditional story stick is just a stick of wood marked with the essential measurements for transfer to your project. The Pinnacle Story sticks are easy to set up, and extremely accurate. Transfer your pre-set dimensions perfectly, even repetitive marks on multiple pieces. Steel marking tabs feature a notched window for precision placement on the anodized aluminum track’s engraved linear scale. Once the marking tabs are properly positioned, a small marking slot, cut into the tab allows accurate transfer of “story marks” to your workpiece. Totally adjustable, easily changed between right and left hand use, these sticks can even be used as a center scale to layout symmetrical projects. Remove the metal marking tabs and the Story Stick makes a very accurate stop rule or extra long shop rule. The 36" Story Stick features 1/32" graduations and the 900mm has one millimeter graduations. Each Story Stick comes with four metal layout tabs and one end stop. Made in USA. 148746 36" Pinnacle Story Stick.......... $34.99 148747 900mm Pinnacle Story Stick... $34.99 148748 pack of 4 repl. stops................. $12.99

82

14" Honing Plate Kit (147987) below. Both plates can be used with most sharpening jigs. 147764 8" honing plate............................ $19.99 147988 14" honing plate........................... $34.99

PINNACLE� Honing Guide

The Pinnacle Guide comes complete with sled, rails, and instructions. The sled rides on the rails while holding your tool at the correct angle and depth making it imossible to sharpen past your set angle. This means you get the sharpest tools ever, with less effort, while extending the life of your tool. The sled has 6 primary bevel positions, 15, 20, 25, 30, 35 and 40 degrees, as well as 6 corresponding micro-bevel positions, 17 degrees through 42 degrees. The sled may be used alone on any smooth flat surface such as a granite surface plate (144838), plate glass, or with the rails. Holds most stones up to 3” x 111/2". The kit includes the Honing Guide, 8" Honing Plate and 8" Honing Film assortment pack. 147763 guide............................................ $ 99.99 147771 guide kit Save Over $10! ........ $114.95 Pinnacle Honing Plates: These machined flat aluminum sharpening plates can be used with wet and dry sand paper as well as high performance film-based abrasives and are guaranteed flat to within .003". The 8" Plate can be mounted directly into the Pinnacle Honing Guide. The 14" Pinnacle Honing Plate permits longer, uninterrupted strokes, resulting in faster sharpening. To use the 14" Pinnacle Honing Plate with your Pinnacle Honing Guide, you’ll need the

Pinnacle 14" Honing Plate Kit Use with the 14" long honing film for longer honing strokes, increased control and greater accuracy during the honing process. Kit includes the new 14" Honing Plate, 20" guides rails (to replace the original rails of your Pinnacle Honing Guide) and a 3-piece assortment pack of Honing Film. The Honing Plate is guaranteed flat within .003". 147987 . ..................................................... $51.99 147989 20" guide rails.............................$14.99 Pinnacle Honing Film: Each pack includes (3) 8" or 14" x 25/8" abrasive film sheets designed for use with the Pinnacle Honing Plate, Granite Surface Plate, or glass surface plates. Honing Film is PSA backed and can be used as such, or may be applied to the surface of choice with soap and water, for easy removal and reuse. 147766 8", 15 micron.................................. $4.99 147767 8", 5 micron.................................... $4.99 147768 8", .3 micron................................... $4.99 147769 8", assortment............................... $4.99 147991 14", 15 micron . .............................. $7.99 147992 14", 5 micron................................... $7.99 147993 14", .3 micron.................................. $7.99 147990 14", assortment.............................. $7.99 Pinnacle Angle Gauge: Measure the bevel angle before and after sharpening with a measuring tool specifically designed for this purpose. The Pinnacle Angle Gauge measures from 15 to 45 degrees. Precision machined, anodized aluminum. 147765 . ......................................................$24.99

WoodRiver® Curve Templates

Transfer complex or compound curves from patterns or directly from your work piece. Just loosen the locking knobs, adjust the template curve, retighten the knobs and your curve stays locked in place. This handy tool eliminates the frustrating "creep" common to most flexible templates ensuring that you get perfect curve reproduction every time. 148455 37" template............................. $39.99 148456 107" template........................... $69.99

WoodRiver® Diamond

8" Grinding Wheel

If you’re using an 8" grinder with aluminum oxide wheels to sharpen your turning tools, you’ve probably gone through more than a few of them. Aluminum oxide wheels are relatively inexpensive and do a nice job but now there’s something better—Woodcraft’s WoodRiver 8" Diamond Grinding Wheel. This 8" diameter wheel consists of a full 4 lbs of 7/8" wide aluminum plate which flares to 1" at the rim. The resin-bonded rand is loaded with diamonds and the 120-grit surface cuts quick and leaves an impressive finish and we have been unable to burn a tool—despite repeated efforts! 5/8" arbor hole. 149479 . ................................................... $149.99

Credit Card Orders: 800 225-1153

Razor Sharp Edgemaking System

Absolutely the fastest, easiest way to put an edge on tools and knives we’ve seen. The Razor Sharp system is comprised of two laminated paper wheels, for either 1/2" or 5/8" arbors, one for grinding and one for buffing. Use the silicon carbide grinding compound/ wax and jewelers rouge on the wheels for a mirror finish. The System includes: grinding wheel, buffing wheel, silicon carbide, conditioning grease, jewelers rouge and instructions. 124629 Razor Sharp System.....................$43.99 151129 repl. grinding wheel......................$22.99 151130 repl. buffing wheel........................$22.99 151126 jewelers rouge................................ $6.99 151127 wax.................................................. $6.99 151128 silicon carbide................................ $6.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Sharpening

A WOLVERINE Grinding & Sharpening Jigs

(A) Wolverine Grinding Jig. Create accurate cutting angles and straight edges, easier and safer, in a fraction of the time it now takes! The Wolverine system is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups. Each base accepts either sliding arm. Arms are effortlessly adjusted or secured by a cam locking device. The “V” arm attachment is 27" long and perfect for sharpening gouges, skews, chisels, or carving tools. The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers. Complete with instructions for installation and use. 125676 . .......................................................$89.99 (B) Turner’s Fingernail/Side Grinding Jig. Grinding difficult fingernail profiles on shallow spindle gouges and side grinds (also called Irish or long grinds) on deep fluted bowl gouges is quick and easy when you use the Vari-Grind Fingernail/Side B Grinding Jig. The Vari-Grind combines “roll & swing” motion into one easily controlled movement that results in an edge so perfect you’ll be amazed at how easily you formed it! Use with Wolverine Grinding Jig (shown in use above), or any other “V” arm system, for maximum control and perfect, repeatable fingernail and side grinds. 125677 . ........................................................$55.99 (C) Wolverine Skew Jig Now, sharpening skew tools is a snap. Simply attach the C skew jig to the Wolverine V-arm, lock in place and you’re ready to go. 127187 . ..........................$30.99 Wolverine Dressing Attachment This wheel dressing attachment removes glazing and produces clean, truly round wheels quickly and easily. The precise adjustment knob allows you to remove as little as .002" per pass over the grinding wheel. Not pictured. 127727 . ....................................................... $67.99

WOLVERINE Vari-Grind 2

Produce and maintain prefect fingernail, and side grind, profiles on spindle and bowl gouges. The new Vari-Grind 2 offers “side restrained action” to keep the tool safely centered on the wheel, eliminating the chance for slipping of the wheel’s edge. Sharp, consistent profiles are easy because thetool rotates about the center of the adjusting rod allowing maximum flexibility, not only in matching a profile but also in creating your own. Available with or without the base. 843656 complete w/base......................$109.99 843655 w/o base...................................... $74.99

Wolverine Platform Kit

We’ve taken one of the Wolverine’s standard bases and platforms to create a kit for sharpening chisels and plane blades using an ordinary grinder. The base attaches to the bench underneath the grinder and features Wolverine’s system of adjustment so distance from base to the stone is easily set. If you would like to increase the versatility of your grinder this is one of the best accessories you can own. Some assembly required. 150878 . .......................................................$59.99

8" Slow Speed Grinder

Quiet, smooth 1/2 HP, 1,725 RPM slow-speed grinder is great for sharpening tools without generating the tool-destroying heat that you get so quickly from 3,450 RPM grinders. Unlike most grinders this slow-speed grinder comes equipped with 1" x 8" 120-grit and 60-grit white aluminum oxide grinding wheels. Includes tool rests and spark/chip deflector shields. 40 lbs., China. 150780 . ................................................... $109.99

Sharp FastTM Tool Guide

Most turning tool gouges are sharpened on a grinder either freehand or with the aid of a “crutch” which makes it easier but not easy. You twist and turn trying to maintain the angle, “capture” the grind and stay on the stone. Not an easy task, until now. With the Sharp FastTM Tool Guide, you can easily match, change or create any grind on any 1/4" up to 3/4" gouge and do it over and over with the same result. It also prevents “over grinding” with a unique measuring device which permits you to control the depth of the grind. Your tools will last longer and edge to edge will be sharper than ever. Safety is unsurpassed because once you’re locked in the guide – you’ll never slide off the stone or have the tool ripped out of your hands. The Sharp FastTM Guide is fast, repeatable, accurate and safe. Turners at all levels benefit from sharper tools and this guide delivers. Sharp FastTM S900 Basic Guide The basic guide was designed to fit systems that utilize the Wolverine style base. If you have a Wolverine, the basic guide is all you’ll need. 149399 ......................................................$94.99 Sharp FastTM S903 Base The Sharp FastTM base is an open base on one side and mountable to either the left or right side of the grinder. The open base makes it easier to clean and protect from rust. 149400 .................... $32.99 Sharp FastTM Tool Guide System The guide and base together for those who need or want both. 149401 .....................................................$119.99

Norton 3X Grinding Wheels

1750 or 3500 RPM, slow or fast, 6" or 8" it doesn’t matter. Norton’s 3X grinding wheels are the fastest cutting, coolest wheels on the market. Norton’s patented SG grain gives the 3X’s an incredible burn free cut with controlled micro grain fracturing that constantly exposes fresh cutting material to keep tools cooler, while cutting faster. Faster cutting and less burning also means longer wheel life. Two grits are available; 46 grit for heavy grinding when establishing a new bevel or an 80 grit for creating a working edge on turning tools or a primary edge on a plane blade. The 6" wheel includes bushings for 1/2", 5/8", 3/4" and 7/8" shafts, while the 8" wheel includes bushings for 5/8", 3/4" and 7/8" shafts. 46 Grit

80 Grit

Dia. Width

838742 838741 ..... 6".....3/4".................... $37.99 838744 838743 ..... 8"......1".....................$49.99

Camel Aluminum Oxide Wheels

Aluminum Oxide grinding wheels are made from granulated aluminum oxide with a vitrified bond which permits the surface to fracture under use, constantly refreshing the cutting surface. This means faster grinding and more importantly, cooler grinding. If you’re a turner, these wheels are a must. Pink wheels are a little harder than the white, so they are more resistant to grooving and will require less dressing. 60 Grit 120 Grit Dia. Color Width

www.woodcraft.com

01W44 01W48 N/A N/A

01W43.......6".... White.... 3/4"..........$26.99 01W47.......8".... Wihte.....1"...........$39.99 127251......6"..... Pink..... 3/4"..........$35.99 127253......8"..... Pink......1"........... $41.99

Helping You Make Wood Work ®

83


Sharpening TORMEK T-7 Water Cooled Sharpening System

The T-7 is rated for continuous use and has a vast array of specialty jigs available. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding. After grinding, the 83/4" x 11/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. Other features include durable drive wheel; stainless steel main shaft; acme threaded tool rest with micro adjustment; Square Edge Jig for chisels and plane irons; 110 volts, 200W, 60Hz, 1.5 Amps, 37 lbs; 7 year warranty. System includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, Handbook and Instructional DVD. 148103.................................................. $599.99

Get The Accessories You Need With Our TORMEK Master Kits!

839787 Hand Tool Accessory Kit . ...................... Save over $7!......................... $165.99 839785 Woodturner's Accessory Kit ................. Save over $20!.......................$304.99 . 148985 T-7 & Hand Tool Kit ................................... Save over $19!....................... $749.99. 148986 T-7 & Woodturner's Kit .............................. Save over $29! ..................... $869.99. 148987 T-7, Hand Tool & Woodturner's Kits............ Save over $57!........................$999.99

Tool Rest With Torlock 11Q50 ..................$33.99

Universal Gouge Jig 143921 ................$86.99

Knife Jig 11Q37 . ................$34.99

Long Knife Jig 840765 .................$49.99

Jointer/Planer Blade Jig 11Q44 ............... $172.99

Scissors Jig 11Q39 ..................$46.99

Axe Sharpening Jig 11Q43 ................. $16.99

Diamond Stone Dresser 147748 ................. $79.99

Stone Grader 11Q45 .................$25.99

Profiled Leather Honing 146034 .................$57.99 11Q49 repl. whl...$61.99

Short Tool Jig 142899 ............... $24.99

Honing Compound 11Q46 .................... $8.49

Multi Jig 129353. .................$61.99

Pro AngleMaster 129354. ................$23.99

Handbook 143923. .................$31.99

Tormek Cover 129824 ................$23.99

Turning Tool Setter 147490. ................$30.99

Square Edge Jig 840358..................$53.99

Turner's Instruction Box 839786. .................$31.99

T-7 Repl. Stone SG250 11Q47 std......... $167.99 149544 black.....$189.99 149545 waterst..$229.99

Tormek T-3

The T-3 is the latest innovation in what many consider to be the finest water cooled sharpening system in the world. This economical priced unit still sharpens like a Tormek but the lighter weight design makes it more suitable for the occasional use hobbyist. The T-3 uses a smaller (200 mm) stone wheel and a less powerful motor to reduce costs. Use any Tormek

TORMEK DBS-22 Drill Bit Sharpening Accessory

The Tormek DBS-22 allows you to sharpen poorly sharpened bits, or to create fresh, sharp, accurate cutting edges on dull bits, by creating 4 facet edges on the twist drill. Your newly sharpened drill bit now has two edges, each with a primary and secondary bevel which meet at a point in the exact center of the bit that stay sharp longer and will allow you to easily position the bit to produce accurately sized, straight holes. The DBS-22 accepts bits from 1/8" to 7/8" in diameter and is compatible with all Tormek models. 151248 . .................................................... $254.99

84

accessory with this machine (except the 250mm stone) and you can achieve precision and versatility once available only to the professionals. 115V, 60 Hz, maintenance free motor. 7 yr. warranty. Includes a square edge jig; angle master; honing compound; HB-10 users manual and the Tormek DVD. 148962 . .................................................... $354.99

TORMEK Advanced Water Trough

Standard on New T-7’s, Tormek’s Advanced Water Trough fits all T-7 and older models except T-3’s and is a “MUST” have upgrade. The new trough features a wider lip, long tool chute and a pair of tilt feet, all designed to help contain the water and keep it off your bench. This is reason enough to replace your old trough but the advantages of this upgrade don’t stop there. The new trough contains a powerful earth magnet to collect the metal filings that fall into the trough and mix with the water, so your stone stays clean for faster, improved sharpening. 151247 . .......................................................$22.99

Credit Card Orders: 800 225-1153

TORMEK Bench Grinder Mount

Includes a Universal Support, a horizontal base, hardware, feet, comprehensive instruction booklet for building the base and safely using the dry grinder. 150157 . ....................................................... $59.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Sharpening A C B

DMT Monocrystalline Diamond Honing Stones

High technology combines the hardness of diamonds with the toughness of plastic to give you excellent sharpening results. Fine monocrystalline diamond particles are permanently fixed to a flat plastic base in a unique screen pattern. Water is used as the lubricating wash for sharpening all tool steels, even carbide edges with minimum cleanup and care. 6" x 2", available in four grits. 07W76 .6" extra fine 1200 grit....................$48.99 09C42 .6" fine 600 grit...............................$48.99 09C43 .6" coarse 325 grit..........................$48.99 02P15 .6" x-coarse 220 grit........................$48.99

DMT Dia-Sharp Offset Mini-Hone

Sharpen, deburr, and hone safely in tight spaces on your circular saw blades or router bits. The offset design of the Mini-Hone offers better control for hard to reach areas. The uninterrupted monocrystalline diamond surface lets you quickly put a razor edge on pocketknives and small contact area tools. Kit contains one of each grit. Tip measures 21/2" x 3/4", .033" thick. 147295 blue, 325 grit....................................$7.99 147296 red, 600 grit.....................................$7.99 147297 green, 1200 grit...............................$7.99 147298 3-pc. set Best Value................... $21.99

DMT DuoSharp & DuoSharp Plus

(A) DuoSharp Diamond Stones. A double-sided bench stone is not only more convenient to carry (one stone instead of two), but it’s money saver too! They’ll sharpen, hone and lap, all types of woodworking tools including knives, chisels, plane blades, gouges, and carbide router bits. Stones measure 8" x 25/8" and 10" x 4". Includes a non-skid mat to prevent slipping on work surface. 140963 8" 1200/600 grit..........................$99.99 140964 8" 1200/325 grit...........................$99.99 140965 8" 600/325 grit.............................$99.99 140966 8" 325/220 grit.............................$99.99 817198 10" 1200/600 grit.......................$129.99 817199 10" 1200/325 grit.......................$129.99 817200 10" 600/325 grit........................ $129.99 817201 10" 325/220 grit........................ $129.99 (B) DuoSharp Plus. These stones have all the features of the standard DuoSharp stones with the bonus of a solid diamond coated area for sharpening small or pointed tools. This feature is like having a 6" honing stone and a sharpening card all in one stone. Bonus - Buy the Stone and Base combo and Save Over $16! 146026 8" 1200/600.................................$94.99 146027 8" 600/325...................................$94.99 146024 8" 1200/600 w/base...................$99.99 146025 8" 600/325 w/base.....................$99.99 (C) DMT DuoSharp Base Holds DMT DuoSharp stones securely in place and elevates them off the work surface for more accuracy and comfort. 141103 . .......................................................$22.99

CC BB AA Granite Surface Plate

Usually only found in machine shops, the super-flat face of a granite surface plate is ideal for leveling plane beds, flattening water stones, and general sharpening duties. Simply soak a piece of wet dry sandpaper in water and lay it on the stone, the capillary action of the water adheres the paper to the stone eliminating the need for spray adhesives or PSA sand paper. When done, wipe clean with a paper towel. Plate is 2" x 9" x 12", tool room “A” grade with calibration certificate. 144838 . .......................................................$31.99

DMT Diamond Wave™

DMT has developed the first diamond sharpener to combine convex and concave abrasive surfaces. The Diamond Wave™ provides radii from .0625" tapering to 1.000" which accommodate any turning or carving gouge plus at 10" in length, enables a much longer sharpening strokes than traditional slips stones. Spend less time sharpening and get a better edge, faster than ever before! Available in two grits: 600/25 micron for coarse work - removing chips, burrs and re-establishing a bevel and 1200 grit/9 micron for a razor sharp edge. 149903 1200 grit/9 micron.......................$59.99 149904 600 grit/25 micron......................$59.99

DMT Diamond Honing Cones

Provide quick, convenient deburring and honing of carving tools, router bits, or any curved metal tools or fixtures. All sizes are supplied with a fine 600 grit diamond surface. The 4" cone includes a handle and tapers from 3/8" to 1/8" diameter. The 6" and 8" cones are unhandled and taper from 3/4" to 3/ " and 11/ " to 3/ " respectively. Buy all three and 8 4 4 receive a free hardwood cherry box. 07W66. 4" cone w/handle......................... $34.99 07W65. 6" cone.......................................... $35.99 07W67. 8" cone.......................................... $45.99 07W68. 3-pc. set Save Over $21! ...........$94.99 819980 819979 147303 411912 411913 147304 147305 411914 147306 147307 147308

6" x 2", 600 grit.............................$33.99 6" x 2", 1200 grit........................... $37.99 (B) 8" x 3", 325 grit........................$64.99 8" x 3", 120 grit.............................$96.99 8" x 3", 220 grit.............................$64.99 8" x 3", 600 grit.............................$64.99 8" x 3", 1200 grit...........................$64.99 8" x 3", 8000 grit...........................$96.99 (C) 111/2" x 21/2", 325 grit.............$89.99 111/2" x 21/2", 600 grit...................$89.99 111/2" x 21/2", 1200 grit.................$89.99

DMT Double-Sided Dia-Sharp Stones

DMT Dia-Sharp Bench Stones

Dia-Sharp continuous diamond bench stones are guaranteed not to hollow or groove. These precisely engineered stones assure consistent, even sharpening every time, and are ideal for knives, blades and fine tools. Sharpening with diamonds is fast and easy. No messy oils needed - sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service, and diamond grade is clearly marked on side of stone. 819981 (A) 6" x 2", 325 grit........................$33.99

Quickly hone a razor-like edge with the uninterrupted diamond sharpening surface of DMT’s Double-Sided Dia-Sharp stones. These continuous diamond surface stones provide cutting edge performance and are recognized for their superior quality. The 2" x 6" size is great for both chisels and knives. Sharpening with diamonds is fast and easy. No oil is needed. You can sharpen dry or with water. 147299 325/200 grit................................$59.99 147300 600/220 grit................................$59.99 147301 600/325 grit................................$59.99 147302 1200/600 grit..............................$59.99

Helping You Make Wood Work ®

85


Sharpening B A

PINNACLE� Arkansas 3-Stone Boxed Set

C B

E

D

This set includes three Arkansas stones (soft, hard white and hard black) in a wood storage box. Each stone measures 6" x 2" x 1/2" and is stored in its own slot within the box. Includes 4 oz. of honing oil. 144788 . .......................................................$52.99

E PINNACLE� Arkansas Stones

True Arkansas Novaculite is renowned for its ability to both cut and polish steel. There is no finer natural stone or a better value in sharpening today. These stones are best used with either oil or water as a lubricant to help float away metal particles. However, you cannot use water once oil has been introduced and used on the stone as it will no longer absorb water. (A) Washita stones are the softest and most aggressive. Used for taking out large nicks, re-beveling and flattening. Stone colors may vary, box included. 07O16 6" x 2" x 13/16"............................... $21.99 145723 8" x 3" x 1/2"..................................$23.99 (B) Soft Arkansas stones are slightly softer than hard Arkansas. Best general-duty stone for multi-purpose sharpening. Stone colors may vary, box included. 07G20 6" x 2" x 1"................................... $21.99 145722 8" x 3" x 1/2"..................................$23.99 (C) Hard Black stones are the hardest and finest stones. Used for a honed, highly polished edge. 07O14 6" x 2" x 1" w/box........................$45.99 145721 8" x 3" x 1/2" w/box......................$49.99 (D) Boxes For Sharpening Stones are handcrafted. 02R11 fits 6" x 2" x 1" stone..................... $6.99 02R12 fits 8" x 2" x 1" stone..................... $6.99

Arkansas Stone Sets includes the full range of grits – Washita, soft and hard. Hardwood storage boxes included. 07O30 6" set of 3 Save over $16!........ $79.99 145724 8" set of 3 Save over $14!........ $89.99 (E) Pinnacle Arkansas Combo Stones One of the best values in sharpening, combos are created by bonding two thin stones of different grits or properties together to create one stone. For our stone, we chose a soft white (general sharpening) stone and a hard black (polishing) stone to make the perfect combo for handling all your sharpening needs. Both come in a wood storage box with a hinged top. Two sizes available. 149102 4" x 2" x 3/4".................................... $19.99 149103 8" x 2" x 3/4".................................... $29.99 (F) Pinnacle Hard White Arkansas File Set 3 files (triangle, round and square) F and a knife edge slip. Perfect for detail polishing, removing burrs, or dressing the insides of small tools. All files are approximately 33/4" long. Knife-edged slip is approximately 33/4" x 1/4" - 1/8". All neatly packaged in a wood storage box with a hinged top. 149101 . .................................................... $29.99

Knife-Edge Slipstones

A Woodcraft exclusive! We have these novaculite stones made to our specifications for precise honing of small and intricate tool edges. The 3" length gives you a longer honing stroke, while the 11/8" width keeps your fingers safely away from sharp tool edges during use. The 30° knife edge reaches deep into the inside corner of V-parting tools. The opposite edge has a 3/16" radius that nicely finishes the inside surfaces of small curved tools. These are the finest stones available for honing cutting edges on carving tools, molding plane cutters, router and drill bits, or miniature turning tools. 5/32" thick. 07O07 hard Arkansas slip........................ $15.99 07O08 soft Arkansas slip.......................... $14.50 141922 hard black Arkansas slip...............$17.50 142062 set of 3, oil & box Save $17! . ....$30.99

Cone Gouge Slipstones

The tapering concave and convex surfaces of these stones simplify the sharpening of gouges. The convex surface deburrs the inside edge and the concave surface the outside edge. Stones measure approximately 6" long. Large ends are 2" wide x 1" thick tapering to 1/2" wide. Oil stones are 1/2" thick and waterstones are 5/16" thick on small end. Oil Stone Cone Gouge Set includes medium and fine Crystolon (silicon-carbide abrasives) and fine India (aluminum-oxide abrasives) stones. 07E20 set of 3 Save Over $13! ............ $74.99 07E03 medium crystolon........................ $37.99 07E04 fine crystolon................................$30.99 140950 fine India...................................... $19.99 Waterstone Cone Gouge Set includes man-made, fast-cutting aluminum-oxide stones for sharpening and honing. 09T60 set of 3 Save Over $13! .............$92.99 09W14 180 grit stone................................$38.50 09T11 1000 grit stone.............................. $27.99 09T21 4000 grit stone.............................$39.50

86

Sharpening Stone Comparison Guide Compares approximate abrasive grit relationships of American and Japanese stones. Stone Type Coarse Crystolon, Coarse India Medium Crystolon Medium India, Coarse Diamond Fine Crystolon, Fine India Medium Diamond Washita Soft Arkansas

US Japan Grit Grit 150 100 180 240 240 280 280 360 320 500 350 600 500 1000 1200

Hard White Arkansas, Fine Diamond,   Medium Black Ceramic 700 2000 Hard Black Arkansas, 900 4000 Ultra White Ceramic 6000

COUNT ON US FROM START TO FINISHTM

Credit Card Orders: 800 225-1153

Jointer Blade Hones

Keep your jointer and planer knives razor-sharp and knick-free without ever removing them from the cutterhead! Simply unplug your machine, lock the cutterhead in position, align the 4" hone on the knife edge and with a few quick strokes you’re back to cutting. Aluminum oxide hone has 180 and 400 grit surfaces and should be lubricated with oil prior to use. Diamond has 300 and 600 grit surfaces and may be used dry or with water lubrication. 09T14 aluminum oxide hone................... $14.99 123679 diamond hone...............................$34.99

Arkansas Multiform Slipstones

Fit Both Gouges And V-Parting Tools! The two different edge shapes makes these stones universal sharpeners. One edge is tapered from a 1/2" to 1/ " diameter to handle 8 the various curves on tools. The second edge is a straight, angled taper knife edge for honing small and large V-parting tools. Stones are approximately 4" x 2" with 1/2" to 1/8" tapers. 08Y32 soft white...................................... $14.99 08Y22 hard white..................................... $16.99 141924 hard black.....................................$28.99 142345 set of 3 Save Over $3! . ............$56.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Sharpening C D A

B NORTON Waterstones

E

Fast-Cutting Japanese Waterstones

Unlike Western man-made stones, water rather than oil is used on Japanese stones to prevent the surface from being clogged with metal particles. We offer two classes of stone: coarse and finishing. The coarse stones are 250, 800, 1000, and 1200 grit. The 250 and 800 grit are faster cutting and used for repairing nicked edges or reshaping a bevel. The 1000 or 1200 grit stones are used for the first stage of the actual sharpening. The polishing stone or Shiage Toishi contains a polishing compound. A polished edge is quickly established, and unlike harder western stones, any trace or wire edge is removed in a single sharpening. Japanese water stones are softer than Western styles causing a fresh, sharp surface to be continually exposed to the tool edge. (A) Combination Water Stones. 04H22. 8" x 2" x 1" 250/1000...................$24.50 09C31. 8" x 2" x 1" 1000/6000.................$33.99 08T41. 71/4" x 21/2" x 1" 800/4000..........$29.99 09A21. 71/4" x 21/2" x 1" 1200/8000........$63.99 (B) Nagura Stone. It is rubbed in a circular motion over the wet polishing stones to quickly get the abrasives into a paste consistency to save sharpening time and encourage even wear on stones. Approx. size 7/8" x 7/8" x 3". 146078........................................................ $12.99 (C) King Brand Deluxe Coarse Stones. For repairing and reshaping tools, 81/8" x 25/8" x 13/8". 11H31. 800 grit...........................................$24.99 11H21. 1000 grit........................................ $25.99 11H11. 1200 grit.........................................$27.99

NORTON Flattening Stone

The softness of a water stone allows it to quickly develop a fast cutting abrasive slurry. That’s a real plus for honing, but a negative when you start to develop shallow indentations and irregularities in the surface. Norton’s new flattening stone, when rubbed across your water stone’s surface, quickly flattens and refreshes the face. Its coarse grit silicon carbide promotes maximum cutting while the diagonal grooves provide a path for material removal during the process. Stone measures 9" x 3" x 3/4", includes a plastic case for storage and easy-to-follow instructions for use and maintenance. 833914 . .......................................................$26.99

(D) Coarse Grit Japanese Water Stone for flattening and shaping carbide or carbon tool steel blades. Silicon carbide abrasives rapidly remove metal. Recommended for initial sharpening of dull edges or removing nicks. 8"L x 21/8"H x 31/8"W. 09C21. 240 grit.......................................... $51.99 (E) Water Stone Holder. Contoured rubber holders keep stones secure during use and provide a nonslip base while sharpening. Arms are made from chrome-plated steel to resist rusting. Holder accepts stones measuring 51/2" to 9" in length. 09T12 . ....................................................... $17.50

ICE BEAR Waterstones

Ice Bear waterstones cut fast and produce the superior scratch patterns so necessary when moving through the grit range to progressively fine stones. Whether you stop at 4000, 6000 or continue to 8000 and beyond, these stones make the task of polishing your blade’s edge easier and faster than ever before. All stones are approximately 71/4" x 23/8" x 3/4". 149289 4000 grit......................................... $25.99 149290 6000 grit..........................................$27.99 149291 8000 grit.........................................$64.99

Introducing Norton’s premier system for sharpening woodworking tools, knives, cutlery and other blades. Their synthetic water stones can produce a surface that is almost unbelievably bright and chrome-like while putting a legendary edge on cutting tools. Coarser grit stones are used to remove nicks and for first step sharpening of badly dulled tools. Mid-range grits, 1000 and 4000 take that shaped edge to a very sharp edge, while the 8000 grit is the finishing stone that brings your final cutting edge up and completely removes scratches from the surface. Care must be used to keep from moving coarser grits onto the surface of finer stones, so each tool must be carefully wiped down before it is moved up a step in the sharpening process. Prior to use, stones should be immersed in water for 10 minutes and kept wet during sharpening. The 8000 grit polishing stone needs only a splash of water on the surface to cut properly. These stones quickly expose a fresh cutting surface for use, which over time creates a sort of dish effect. The stones may need flattening with some frequency. The Set of 4 includes 220, 1000, 4000 and 8000 grit stones. All are 1" x 3" x 8". 822459 220 grit.........................................$25.50 822460 1000 grit.......................................$43.50 822461 4000 grit...................................... $58.50 822462 8000 grit...................................... $88.99 144269 set of 4 Save Over $21! ..........$194.99 Combination Stones. The double grit stones reduce the cost of getting started with waterstones, while providing a full selection of grits. The 1000/4000 stone is a fine general-use stone, while the 220/1000 works as a starter stone if your tools are in rough shape. The 4000/8000 stone is a finish stone set. All are 1" x 3" x 8". 818262 220/1000 grit..............................$36.99 818263 1000/4000 grit............................$56.99 830575 1000/8000 grit............................$65.99 818264 4000/8000 grit........................... $78.99

Japanese Water Slipstones

Measuring 21/2" x 1" x 1/4", these slips are small enough to sharpen the narrowest gouges, chisels, and V-tool profiles, yet thick enough to last for years. Each grit set contains 4 different styles; the 12-piece set contains all three grit sets. 1000 grit is for general sharpening, the 4000 for final honing, and the 8000 for a brilliant polished, razor’s edge. 140564 1000 grit 4-pc. set......................... $21.50 140565 4000 grit 4-pc. set........................$23.99 140566 8000 grit 4-pc. set........................$32.50 140567 12-pc. set Save Over $23! .........$54.99

Carver’s Waterstones

Sharpen every gouge, chisel, and skew in your tool roll with our King brand waterstones. Each set includes a 21/2" long teardrop-shaped slipstone and a 41/4" x 21/2" x 1/2" stone with five concave profiles on one side and a smooth face on the other. The 1000 grit stone is for general sharpening, leaving a polished finish. The 4000 grit is for final honing, leaving a mirror finish. 140325 1000 grit set..................................$22.99 140326 4000 grit set..................................$23.99 140327 set of 2 Best Value!.................... $36.99

Helping You Make Wood Work ®

87


Sharpening A

B SHAPTON Glass Ceramic Water Stones

Shapton Glass Ceramic Water Stones are the finest manmade ceramic water stones….period! This claim is based largely on two properties - the speed at which the Shapton stones cut and the edge they create. Shapton stones are designed to be harder, faster cutting, and denser than any other ceramic water stone on the market. Because they remove material quickly, the time required to hold a tool angle on the stone is reduced, making free hand sharpening much easier. Equally important to cutting speed is the consistency of the finished edge. The sharpest cutting edge is created by the finite intersection of two highly polished, flat surfaces. The finishing grits (16000 and 30000) of the Shapton stone system leave a polished surface free of scratches creating a mirror finished, razor sharp edge. Each stone is comprised of a 5mm thick glass backing plate fused to a 5mm thick stone and measures 23/4" W x 81/4"L. We recommend purchasing, and using, the Shapton stone holder. As it provides a secure platform and protects your stone when in use. 834941 (A) 1000 grit....................................$49.00 834943 4000 grit.........................................$62.00 834944 6000 grit . ......................................$69.00 834945 8000 grit.........................................$88.00 834946 16000 grit.....................................$112.00 834947 30000 grit.....................................$310.00 839778 (B) stone holder..............................$88.00

SHAPTON Diamond Glass Lapping Plate

Flat is the foundation of any sharpening system…. flat backs, flat bevels, flat tools and flat sharpening stones. Why is flat important? The sharpest cutting edge is the intersection of two perfectly flat areas of the tool, the bevel and the back. Since the surface of the tool will mirror the stone it was sharpened on, it is critical that the sharpening stone be flat. The Diamond Glass Lapping Plate, is flat to ± 5 microns, and will easily return Shapton stones to perfect flatness. Keeping your stones flat means sharper tools, but it will also ensure even wear for longer stone life. For optimum sharpening results, Shapton stones must be flattened after each use. 833886 . .................................................... $320.00

Micro-Fine Honing Compound

This green, chromium oxide compound works well with leather power strops and felt wheels operating at or below the 1,750 RPM range. Charge your leather bench strops for superior hand-honing of tools. The .5 micron particle size leaves a cutting edge on your plane irons, chisels, and carving tools razor-sharp, and with a mirror finish. 20 oz. bar. 06L01 . .......................................................$22.99

88

Natural Polishing Waterstone

An extremely fine (12,000+) grit natural waterstone quarried in the Guangxi province of China. This stone is dense and perfect for final polishing on all your carving tools, plane blades, chisels or any tool requiring a keen edge. If you’ve been wanting a natural polishing stone but have been putoff by the cost, we urge you to try these stones. 144950 8" x 23/4" x 11/4"............................$34.99 144951 8" x 2" x 1".................................... $19.99

Spyderco Ceramic Sharpening Stones

Ceramic stones unlike man-made Japenese waterstones or man-made oil stones, require no lubrication. The medium (brown) stones have a grain structure ideal for reshaping a blade or removing nicks and will show wear over time or with heavy use. The fine and ultra fine (white) stones do not wear at all and have a grain structure that excels at polishing the edge of any steel.

Leather PowerstropsTM

For use with your power drill or chucked motors and polishing heads, these laminated leather wheels act as rotating strops for fast honing action. Treated leather stays firm under pressure and holds abrasive compounds longer for more efficient use. Each includes a stick of jewelers rouge and 1/4" threaded arbor. Not to exceed 600 RPM. Vee Powerstrop for veiners, V-parting tools, and small radius gouges. 31/2" diameter x 3/8" thick. 15T21 ...........................................................$24.99 Wheel Powerstrop for sharpening knives, chisels, or gouges. 31/2" diameter x 3/4" thick. 08R31 . .......................................................$24.99 15T31 vee & wheel set Save Over $10! .$39.89

Bench Stones

Guaranteed flat (within .020), these 2" x 8" stones are ideal for sharpening and polishing a wide variety of chisels or plane blades. Each stone comes packed in a rigid polymer case with rubber feet. 835910 medium/600 grit.........................$48.99 835911 fine/1800 grit...............................$48.99 835912 ultra fine/2000............................$69.99 147955 Set of 3 Save Over $22.............$144.99

Pocket Hones

At just 1" x 5", these Pocket Hones are just the right size from pocket knives to small carving tools. Leather pouch included. 835914 medium/600 grit.........................$23.99 835915 fine/1800 grit.............................. $21.99

WoodRiver® Leather Bench Strops

Remain the traditional honing system for carvers and whittlers because they’re so easy to use. Just prime the leather with the appropriate compound and hone your tool with a lapping “barber’s” stroke. Prime leather stropping surfaces measure 2" x 8", are milled flat, textured to hold the lapping compound and are bonded right up to the edge of a hard maple base. Handled version has leather stropping on both sides for charging with compounds of different grits. 18H21 bench strop...................................$26.99 18H33 handled, 2-sided strop................ $41.99

File Set

The multiple profiles offered in this set are perfect for small wood carving tools. All the files are a single, fine/1800 grit. The set of four files includes a round, square, triangle and heart shaped slip and a protective, snap-front suede pouch. 835913 . .......................................................$44.99

ProFiles

Originally designed to sharpen knives and fish hooks, but can also be used for a variety of sharpening jobs. The set includes 2 files (1 medium/600 grit and 1 fine/1800 grit) 3/4" wide by 8" long with an elliptical profile shape. Each file has a flat surface and large radius for plain edges, a small radius for serrated edges, and a groove that runs the length of the stone. 147958 . .......................................................$49.99

Credit Card Orders: 800 225-1153

Slipstrop

With the included Flexcut Gold polishing compound, the Slipstrop works to keep an edge on carving tools that is unsurpassed. The Slipstrop is specially molded to polish and deburr hard to reach areas inside V-tools and gouges, as well as do a fine job on outside bevels. The Flexcut Gold polishing compound applies to the strop like a crayon, and quickly polishes hardened steel. Together, the two produce the finest possible edge for carving tools. 143657 . ......................................................$13.99 143656 replacement honing compound....$6.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Sharpening

Work Sharp® 3000 KOCH Sharpening System

AVAILABLE EXCLUSIVELY FROM WOODCRAFT! The Koch System is the finest and fastest carving tool sharpening system in the world. Many sharpening systems claim to make the sharpening process faster and easier but the Koch delivers. This system was designed to eliminate time and frustration associated with sharpening and to this end, we’re continually amazed at how easy it is to use. The unique, “thermal-reactive” properties of the sharpening wheels and paste are what make the Koch Sharpening system different. Within a few seconds the heat generated by pressing the tool against the wheel turns the paste into a liquid that cools and sharpen at the same time. The resulting edge has no burr and there was no danger of bluing your tool’s cutting edge. A quick wipe to remove excess sharpening paste and you’re back at work. From the smallest veiner to the largest gouge – putting an edge on a carving tool has never been easier. The Koch Sharpening System comes complete with four different colored wheels and two pastes. The red and yellow wheels are mounted on the outside arbor position and are designed to be used with curved tools like gouges. The green and blue wheels are mounted on the inside arbor position and are designed to be used with straight tools. The blue honing paste is formulated for use with the yellow and green wheels to produce a more honed or polished edge. The green sharpening/ grinding paste is designed for use on the blue and red wheels and is used for more aggressive sharpening. 1/3 hp, 110V motor with 3' power cord. Some assembly required. Instructions included. 150667 Koch Sharpening System......... $299.99 148565 4" blue wheel................................$56.99 148566 4" red wheel..................................$56.99 148567 4" yellow wheel.............................$39.99 148568 4" green wheel..............................$39.99 148569 green grinding paste, 2.5 lbs...... $21.99 148664 blue sharpening paste, 2.5 lbs... $21.99

The Work Sharp 3000 is an innovative air-cooled, dry sharpening system that’s ready to use – right out of the box. The 3000’s innovative use of solid, tempered, float glass wheels; a “see-through”, slotted wheel; high-quality, replaceable abrasive discs and multiple access points enable you to sharpen a wide variety of tools with a precision and delicacy not often found on a powered grinder. Full access to the top surface and an adjustable tool rest permit the grinding, sharpening and honing of large tools while the precision sharpening port provides for accurate sharpening of chisels an d plane blades up to 2" wide with one of four preset angles - 20, 25, 30 or 35 degrees. Finally, use of the “see-through” wheel and large port, providing access from underneath, allows you to sharpen tools from below while monitoring stock removal from above. Comes with

Work Sharp® 3000 Wide Blade Attachment

If you own a Wo r k S h a r p 3000, you need this attachment–it’s that good. Using it you can grind, sharpen, and hone most plane or chisel blades up to 3" wide. It works in conjunction with the 3000’s glass plate and utilizes the entire available abrasive surface, which you can’t do when using the chisel port. We found this attachment so effective that now we only use the port for coarse grinding. The attachment has three main components: a plate which attaches to the back of the 3000; a guide which holds the blade and rides on the plate; and a bevel setter. It’s easy to set up, and even easier (if that’s possible) to use. Plus, it makes micro bevels a snap to do. 149512 . .......................................................$69.99

2-year manufacturer’s warranty, 2 tempered float glass wheels, a “see through” slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 HP motor, 580 rpm (gear reduced), 16 lbs. 148124 Work Sharp 3000......................$199.99 148125 leather hone................................$29.99 148126 tempered glass wheel................. $19.99 148127 slotted wheel............................... $19.99 Abrasive Kit, Coarse ................................................ includes P80 (2), P120 (2), P220 (3), P400 (2)...... 148128 . .................................................... $14.99 Abrasive Kit, Fine .................................................... includes P400 (4), P1000 (6), 2"x2" P400 (2)........ 148129 . .................................................... $14.99 Abrasive Kit, Hone . ................................................. incl. 3600 MicroMesh (1), 6000 Micro-Mesh (1).... 148130 . .................................................... $14.99 Abrasive Kit, Slotted....................................includes P80 (1), P400 (2), P1200 (2), 6000 Micro-Mesh (1). 148131 . .................................................... $14.99

Work Sharp® 3000 Knife Sharpener

Easily sharpen all your kitchen knives, hunting knives and scissors on your Work Sharp 3000 with their new Knife Sharpener. It’s quick and economical. The Sharpener is comprised of a drive wheel, blade guide and 3 (coarse, medium and honing) long lasting abrasive belts. It’s easy to set up, use and puts an edge on knife or scissors in short order. Replacement belt kit contains one belt of each grit. 151270 Work Sharp 3000 Sharpener........$59.99 151271 belt kit............................................. $12.99

A Work Sharp® 3000 Surface Conditioning Wheel

B

If you are re-conditioning an old tool or simply cleaning “gunk” from a new one, Work Sharp’s Surface Conditioning Wheel is just the ticket. The pliable, non woven abrasive pad makes short work of rust, paint and anything else that shouldn’t be there, without damaging your tool! Includes a top knob for securing the wheel to your WS3000. 150155 (A).................................................... $19.95

Work Sharp® 3000 Felt Polishing Wheel Medium density felt wheel used for polishing, de-burring and honing edges between sharpenings. Includes a top knob, fine abrasive compound and a wheel storage bag. 150156 (B)....................................................$24.95

A

Woodcraft's Sharpening Service We've put the finest cutting edges on countless numbers of tools throughout the years. Except for our Swiss Made carving tools, most of our edge tools require sharpening or honing before use. We will expertly sharpen your new tool if you request the service from your order taker when you place your order. This option is also available online and in our stores. New & Used Edge Tools. Includes chisels, carving tools, plane blades, micro carving, shavehooks, inshaves, drawknives and turning tools. # of tools to be sharpened 1–4 5–8 9+ 

98X91 new tools......... $4.99 98X82 used tools........ $5.99

$4.50 $5.39

$3.99 $4.79

Work Sharp® Knife & Tool Sharpener The Work Sharp hand held, motorized sharpener, sharpens any knife as well as scissors, tin snips, garden shears, lawn mower blades and a host of other tools. Patented Flex-Tek™ belt technology conforms to the shape of any blade, so the sharpener is easy to use and practically guarantee’s a sharp edge. Includes an 2 guides for outdoor or kitchen knives, coarse, medium and fine grit sharpening belts, instruction booklet and instructional DVD. Replacement belt kit (A) contains 6 belts, two of each grit. 151170 sharpener ......................................$69.95 151171 repl. belt kit (A)................................. $9.95

A

B

DMT Magna-DiscTM System For The Work Sharp®

Diamond are the hardest, most durable substance known to man. Now, thanks to DMT, diamond sharpening capability is available for the Work Sharp 3000 through two kits that work with the Worksharp's glass plate. The Sharpening Kit consisting of 2 diamond discs (325 and 600 grit) and a mounting disc. The Honing Kit consists of 1 diamond disc (1200 grit), 2 grams of 8000 grit diamond paste, a buffing disc (to use with the paste) and a mounting disc. 150669 (A) Sharpening Kit..........................$94.99 150668 (B) Honing Kit................................. $74.99 151172 5 grams diamond paste................$24.99

Helping You Make Wood Work ®

89


Sharpening

Sharp Skate II with Dock

Side to side sharpening isn’t new, but it certainly isn’t main stream either. Traditional sharpening employs a front to back, or an into/away, motion while side sharpening requires movement of the tool from side to side. Why side sharpen? Many believe this method is faster and produces a sharper tool. The Sharp Skate is a side sharpening jig that removes the guess work and helps you master the side sharpening process. The Dock sets the bevel and if you’re using one, the secondary angle or bevel. The Skate and Dock are quick and easy to set up and will produce consistent, spectacular results. USA. 150926 . .....................................................$189.99

Chisel & Plane Blade Sharpening Guide

Sets Up Easily & Folds Compactly! The adjusting knob determines the bend in the guide’s body and the angle of sharpening at the tool’s front edge. Angles can be set with the printed scale, a protractor or by eye. Spring tensioned clamp holds tools up to 25/8" wide. Two-wheeled rear roller moves in a straight line during use and will not wander sideways like other guides. Lightweight sharpener is made of high-impact Lexan. 03E42 . ......................................................$29.99

Honing Guide Speeds Sharpening

B

A

C Wheel Dressers

(A) Wheel Dresser. Removes glazed grinding surfaces and reshapes wheels safely and quickly. Heavy-duty cast-iron handle with replaceable cutters. 03A11 . ...................................................... $20.99 03A12 replacement cutters......................... $7.99 (B) Dressing Stick. Recommended for reshaping all types of abrasive wheels, even rubberized abrasives and water stones. This silicon carbide dressing stick is 1" x 1" x 6". 11N51 .........................................................$10.99 (C) Diamond Tip Wheel Dresser The Fastest And Easiest Way To Dress A Grinding Wheel! Avoid all of the inaccuracies and difficulties of single point dressing tools! This nickel plated dresser has long-lasting, 36 grit diamond “chips” for fast resurfacing or shaping. Unlike single-point dressing tools, it has a dressing surface area that is 1/2" wide and 13/4" long. Uniform reconditioning your wheels is as simple as placing the dresser on your tool rest and contacting the wheel. No more frustration from futile attempts of trying to accurately guide a single point, diamond tip across the face of your wheel. Overall length 45/8". 124670 . .....................................................$14.99

Oar Sharpener

The Oar Sharpener is the perfect jig to use when sharpening all sizes and shapes of gouges, v-tools, and chisels. The jig holds and guides a woodcarving tool at a constant angle while sharpening on a bench stone. It also works with bench chisels up to 11/2" wide. Made of machined aluminum, includes detailed instructions. The Oar Sharpener makes sharpening tools that would otherwise be a challenge, a breeze. 142390 .......................................................$34.99

90

You can hone edge tools between grindings with this unique self-centering guide. Chisels and plane irons from 1/16" to 25/8" wide can be held securely in one of the two sets of stepped jaws. The accurately ground hardened steel roller glides across the surface of the stone to allow for a consistently fine edge. 03A21 ...................................................... $12.99

Complete Beginner's Woodcarving Kit

Contains everything you need to get started, all conveniently stored in a durable canvas tool roll. John Hillyer presents 20 projects in his book Woodcarving. The projects tend to increase in complexity as the book goes along, but the color photos covering the steps involved are clear and well thought out, as are the step-by-step directions. You may select a different favorite, but the roly-poly Santa and the carved egg were ours. Possible preferences include swimming dolphins, sitting Scotty dog, a love spoon, or a stretching cat. Kit contains all the necessary tools to complete the projects: both roughing and detail replaceable blade knives; 5/16" #8 fishtail gouge; 9/64" #8 gouge; 9/64" bent 90° V tool; 3/8" double bevel straight chisel; 3/8" bent chisel, 3/8" double bevel skew chisel; teardrop shaped slip stone; 4 oz. bottle of sharpening oil; a snap close canvas tool roll with individual pouches to protect your tools, accessories and book. 140434 ................................................... $124.99

Deluxe Canvas Tool Rolls

Whittling Kit

Whether you’re a beginner looking for detailed directions, or an advanced carver looking for a simple way to relax, you’ll find what you need in our Whittling Kit. With The Little Book of Whittling, our 2-blade carving knife, and a couple of thumb guards you’ll be ready to kick back and start making chips. 146793 .......................... $31.99

Carver’s Soft Head Mallets

Deliver a lifetime of use and accept a lifetime of abuse! The resilient urethane heads of these carver’s mallets are almost indestructible, and produce an exceptional, longer-lasting impact force. The anti-shock cushion, load-spreading effect of the urethane head is ideal for woodworkers who suffer from arthritic elbows. We guarantee they won’t crack or split. Overall length approximately 101/2", with hardwood handles. Weight Head

Diameter

13T41 12 oz................. 23/4".....................$34.99 141039 16 oz................. 23/4".....................$38.99 13T51 20 oz................. 31/2".....................$39.99

Credit Card Orders: 800 225-1153

Heavy canvas rolls are stitched to hold 9, 15 or 25 carving tools or chisels. The edges of the rolls are sewn with cotton banding to prevent fraying. Rolls feature a large end flap with cotton tie that firmly closes the roll to prevent your tools from slipping out. For tools under 12" in length. 02L11 9-pocket roll......................................$24.99 09L11 15-pocket roll....................................$29.99 09L21 25-pocket roll....................................$32.99 Chip Carver’s Tool Roll has 11 pockets for tools up to 8" in length. Top flap completely covers tools when closed to prevent edges from rubbing together. Single row of pockets makes tool selection easier. Holds miniature turning tool sets, too! Not illustrated. 02X41 . .......................................................$20.99

Magnifying Lamp

Brings light and magnification precisely where you need it while relieving eye strain. 33/4" diameter 3-diopter (3X) glass lens with incandescent 60 -watt fixture is mounted on a springbalanced arm with a reach of 36". Mounting bracket clamps to shelf or workbench edge. 60-watt bulb not included. 09L05 . .......................................................$30.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving

Old Time Whittling Kit

pfeil®

PFEIL Swiss Made Full-Size Starter Set

With Keith Randich’s book and a few essential tools, this beginner's kit has everything you need to learn the basics of whittling. Includes Old Time Whittling, a Bütz carving knife, leather bench strop and compound for keeping the knife sharp, two thumb guards for added safety, and a 2" x 2" x 12" piece of kiln-dried basswood. Happy Whittling! 10A90 Save Over $9! ....................................................................$64.99 Old Time Whittling, An Introductory Text by Keith Randich. Learn the basics while creating an egg, an old boot, a ball-in-the-cage, a wooden chain, a ball-in-a-ball, an arrow through the heart, and more with this easy-to-follow text. Ten projects with concise instructions and 50+ photographs and diagrams. 60 pgs., softcover. 10A85 ...........................................................................................$11.99

This is an ideal selection for the beginning carver who wants a basic set of full-sized but commonly used tools. Everything you need to get started is here, including a heavy-duty, fitted tool roll to hold and protect your tools. Set includes: 12mm No. 1 single-bevel straight chisel; 12mm No. 1 skew cut double-bevel chisel; 12mm No. 5 gouge; 20mm No. 4 gouge; 10mm No. 7 gouge; 4mm No. 9 gouge; 8mm No. 12 V-parting; #12 chip carving knife. 05E50 .................................................. $254.99

B

Brienz Carving Mallets

C

08G08 08G09 08G10

G

A

H I

T h e s e e xtraordinarily high-quality, hand crafted mallets are made for Woodcraft by the manufacturer supplying the prestigious Brienz Woodcarving School in Brienz, Switzerland. Used by master carvers and apprentices throughout the world, these lacquered straight grain beech mallets fit comfortably in the hand and give you great control. Weight and dimensions may vary slightly. Weight Diameter Length

F

Ounces

81/2............ 23/4"........... 10".......$59.99 141/2........... 31/8"......... 113/4".....$60.99 231/2..............4"............. 13".......$62.99

D

J E

Chip Carving Knives

Although designed for chip carving, these knives are used by whittlers and cabinetmakers as special purpose and general bench knives. Hardwood handles are designed to match the blade style and assure tool control. Overall lengths range between 5" and 7". Rc 57-60 hardness. Honing required before use. 15U60 set of 5* Save Over $17! ............ $74.99 15U20 set of 10 Save Over $59! ...............$119.99

A RAMELSON Palm-Handled Carving Set

Power Grip Carving Tools

The handle shape and short blade length of these unique carving tools make them the perfect “gap fillers” between conventional palm-handled and fullsized carving tools. The 41/2" handles are designed to be held like a pencil for precise control. When more force is needed place the flared handle end in the palm of your hand. 11/4" laminated steel blades. Includes storage box. Five-Piece Power Grip Set contains a 3mm (1/8") #9 gouge, 6mm (1/4") #8 gouge, 7.5mm (5/16") skew chisel, 7.5mm (5/16") straight chisel, and 4.5mm (3/16") V-parting tool. 18C41 .................................................... $42.50 Seven-Piece Power Grip Set contains the tools in five-piece set above plus a 9mm (3/8") #5 gouge and a 9mm (3/8") #3 gouge. 18C42 .................................................... $51.99

The overall design of the tool keeps your fingers close to the cutting edge and the comfortable half-round palm-style handles feature a flat spot that keeps them from rolling off your bench. Set A contains smaller cutting profiles for more intricate work. Set B contains slightly larger profiles for quicker stock removal and shaping. Overall length of the tools is 43/4". Factory sharpened and ready for use. 09H01 1/4" skew chisel................................. $9.99 09H02 1/8" veiner.......................................... $9.99 09H03 1/8" v-parting...................................... $9.99 09H04 1/4" #5 gouge.................................... $9.99

15U21 15U31 15U61 15U92 15U11 15U71 15U51 15U41 15U81 15U91

A....................................................... $18.50 B.......................................................$17.50 C....................................................... $19.99 D...................................................... $15.50 E....................................................... $15.50 F*..................................................... $20.99 G*.................................................... $16.50 H*.................................................... $19.99 I*...................................................... $18.99 J*..................................................... $16.50

B 09H05 3/16" #5 gouge................................... $9.99 09H06 1/8" #3 gouge.................................... $9.99 09H10 set of 6 tools above (A)..................$49.99 09I01 09I02 09I03 09I04 09I05 09I06 09I10

3/ " chisel double bevel ............... $18.99 8 3/ " #3 fishtail gouge . ................... $19.50 8 3/ " #5 fishtail gouge . ...................$20.99 8 3/ " #7 fishtail gouge .....................$20.99 8 3/ " #9 fishtail gouge....................$20.99 16 3/ " #9 fishtail gouge . ...................$20.99 8

set of 6 tools above (B) . ............$104.99

09I20

set of 12 Save Over $61! ..........$119.99

Helping You Make Wood Work ®

91


Carving

PFEIL Swiss Made Carving Tools

We are pleased to be the exclusive United States distributor of Swiss made tools. For over 45 years we have offered our customers carving tools that we believe are the finest in the world. These tools are made with a dedication to quality unsurpassed in today’s high-tech world. Each highly polished blade starts with the best alloy tool steel that is forged and finished to provide a proper balance of strength and weight. Blades are electronically hardened to exacting tolerances and tempered to Rc 59-61 to create a durable, resilient cutting edge that stays sharp longer. Each tool has an octagonal, European hardwood handle finished with solvent-free vegetable oil. Overall lengths range from 91/2" to 11" with blade lengths of 31/2" to 4". Swiss made tools shave wood smoother and more precisely than any other carving tool. For more info, visit woodcraft.com! Width (mm) Unfortunately, when tools are crafted to the high standards of our Swiss line, demand often exceeds supply. We make every effort to keep all sizes and Hand-sharpened styles (over 500) in stock at all times. Sometimes cutting edge, we’re out of stock on a particular item because of the limited number inside sweeps of tools our Swiss manufacturer can make. finely ground and polished Many customers find that more than one size and style meets their carving needs. If you can accept a substitute tool, simply list your alternatives when ordering. We recommend you place your Swiss tool orders by using our toll-free number so availability can be confirmed and if necessary a substitute selected. But if you prefer to place a tool on back order, we’ll keep you informed of the status of your order. When stock is received, we will fill your order immediately.

pfeil®

1st digit is profile/sweep, second digit is width of cutting edge Square tang in handle prevents twisting Durable octagonal shape hardwood handles from ecologically managed Swiss forests

Full bolster distributes pressure to handle

Marked for easy identification

Internal steel ferrule under bolster prevents handle Tools are smooth splitting and polished and hardened to end of profile

Special alloy chromevanadium steel is renowned for its long cutting life

GOUGES GOUGES #1 Sweep Gouges

05G12 60mm...................... $87.99 05X24 80mm...................$109.99

Gouges are forged in various sweeps to remove greater or lesser amounts of wood. For example, roughing out the background for a large relief panel would require a tool such as a 9 sweep. The ridges and hollows formed by this tool would then be leveled with a 2 or 3 sweep gouge. See Sweep Diagrams for tool profiles.

# 2 Sweep Gouges

05B04 05W21 05B06 05B07 05E31 05B08 05E32 05B09 05E37 05B10 05F26 05B11 05C02 05C04 05F16 05G21

2mm........................$28.99 3mm........................$28.99 5mm........................$30.99 8mm........................$30.99 10mm......................$32.99 12mm......................$32.99 14mm......................$34.50 16mm......................$34.50 18mm......................$34.50 20mm......................$38.99 22mm......................$38.99 25mm......................$38.99 30mm......................$45.99 35mm......................$48.50 40mm.....................$52.99 60mm......................$98.99

# 4 Sweep Gouge

05B17 05B18 05B19 05B20 05B21 05B22 05B23 05B24 05B25 05D11 05B26 05B27 05B28 05B29 05B30

92

2mm.........................$27.99 3mm.........................$27.99 5mm.........................$27.99 8mm.........................$27.99 10mm...................... $29.99 12mm...................... $29.99 14mm...................... $29.99 16mm...................... $29.99 18mm...................... $34.99 20mm...................... $38.99 22mm...................... $38.99 25mm...................... $39.99 30mm...................... $46.99 35mm...................... $48.99 40mm...................... $56.99

Credit Card Orders: 800 225-1153

# 3 Sweep Gouges

05E11 05C03 05C05 05C06 05E33 05C07 05E34 05C08 05E38 05C09 05F27 05C10 05C11 05D02 05F17

2mm......................... $27.99 3mm........................$28.99 5mm........................$30.99 8mm........................$30.99 10mm..................... $33.99 12mm......................$33.99 14mm .....................$34.99 16mm......................$34.99 18mm......................$34.99 20mm......................$34.99 22mm......................$35.99 25mm......................$38.99 30mm......................$48.50 35mm......................$51.99 40mm.....................$54.99

#5 Sweep Gouges

05E12 05W65 05D03 05D04 05E35 05D05 05E36 05D06 05E39 05D07 05F28 05D08 05D09 05D10 05F18 05G22

2mm........................$29.50 3mm........................$29.50 5mm........................$29.99 8mm........................$29.99 10mm......................$30.99 12mm......................$32.50 14mm......................$34.99 16mm......................$34.99 18mm......................$34.99 20mm......................$39.99 22mm......................$39.99 25mm......................$39.99 30mm......................$49.50 35mm......................$49.99 40mm.....................$56.99 60mm......................$98.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving GOUGES GOUGES 05B31 05B32 05B33 05B34 05B35 05B36 05B37 05B38 05B39 05B40 05B41 05B42 05B43 05B44 05B45

# 6 Sweep Gouges

# 7 Sweep Gouges

2mm.........................$27.99 3mm.........................$27.99 5mm.........................$27.99 8mm.........................$27.99 10mm...................... $30.99 12mm...................... $30.99 14mm...................... $30.99 16mm...................... $35.99 18mm...................... $35.99 20mm...................... $39.99 22mm...................... $39.99 25mm...................... $39.99 30mm...................... $50.99 35mm...................... $54.99 40mm...................... $68.99

05E13 05E01 05E02 05E40 05E03 05E42 05E04 05E43 05E05 05W91 05F29 05E07 05E08 05E10 05F19 05G23

# 8 Sweep Gouges

05F01 05X61 05F02 05F03 05F04 05F05 05F06 05F07 05E14 05F30 05F09 05F11 05F12 05F20

2mm........................$30.99 4mm........................ $27.99 6mm........................$30.99 8mm . .....................$31.99 10mm......................$33.99 12mm . ...................$33.99 14mm......................$34.99 16mm . ...................$35.99 18mm......................$38.99 20mm......................$40.50 22mm......................$40.50 25mm......................$44.99 30mm......................$49.50 35mm......................$54.99 40mm.....................$63.99 60mm......................$99.99

#9 Sweep Gouges

2mm........................$29.99 3mm........................$30.99 4mm........................$30.99 7mm.........................$30.99 10mm......................$32.99 13mm......................$32.99 16mm......................$36.99 18mm......................$38.50 20mm......................$40.99 22mm......................$40.99 25mm......................$40.99 30mm......................$53.99 35mm......................$54.99 40mm.....................$59.99

05E41 05G03 05G04 05D12 05G05 05G06 05G07 05T31 05G08 05F32 05G02 05F31 05G09 05G10 05G11 05F21 05G13

1mm........................$26.99 2mm........................$26.99 3mm........................$28.99 4mm........................$28.99 5mm........................$28.99 7mm.........................$29.99 10mm......................$31.99 13mm......................$31.99 15mm......................$33.99 18mm......................$34.99 20mm......................$34.99 22mm......................$38.99 25mm......................$41.99 30mm......................$43.99 35mm......................$55.99 40mm.....................$59.99 50mm....................$124.99

SPOON GOUGES GOUGES SPOON Shaped similar to an everyday table spoon and most useful in sections where a long straight blade would be impractical because of detail or size of the work. Sweep numbers heading each style refer to the same numbers in the standard tool listing. See Sweep Diagrams for tool profiles.

#3 Sweep Spoon Gouges

05W55 05K01 05K02 05K03 05W61 05K04 05K20 05F52

3mm........................$28.99 5mm........................$28.99 8mm........................$32.99 12mm......................$32.99 16mm......................$32.99 20mm......................$36.99 25mm......................$40.99 30mm......................$46.99

#7 Sweep Spoon Gouges

05W85 05K09 05F54 05K10 05K11 O5L01 05F56 05W95 05X51

4mm........................$26.99 6mm........................$29.99 8mm........................$29.99 10mm......................$31.99 14mm...................... $37.99 18mm......................$38.99 20mm......................$40.99 25mm......................$42.99 30mm......................$49.99

#5 Sweep Spoon Gouges

05W71 05K05 05K06 05W75 05K07 05K08 05W81 05F53

3mm........................$29.99 5mm........................$30.99 8mm........................$30.99 12mm......................$33.99 16mm......................$33.99 20mm......................$33.99 25mm......................$41.99 30mm......................$46.99

#8 Sweep Spoon Gouges

05X65 05L02 05L03 05L04 05X71 05L05 05X75 05F57 05X81 05F58

3mm........................$26.99 4mm........................$26.99 7mm.........................$29.50 10mm......................$29.50 13mm......................$32.99 16mm......................$33.50 18mm......................$35.99 20mm...................... $37.99 25mm......................$39.99 30mm......................$46.99

Helping You Make Wood Work 速

93


Carving SPOON GOUGES GOUGES SPOON #9 Sweep Spoon Gouges

05F55 05X95 05L06 05L07 05L08 05T35 05L09 05K18

#11 Sweep Spoon Gouges

2mm........................$28.50 3mm........................$29.50 5mm........................$30.50 7mm.........................$30.50 10mm......................$30.50 13mm......................$30.50 15mm...................... $37.99 20mm......................$38.99

05F59 05L10 05L11 05T55 05M01 05M03 05T71

1mm........................$44.99 2mm........................$32.99 3mm........................$32.99 4mm........................$32.99 5mm........................$36.99 7mm.........................$38.99 10mm......................$38.99

SKEWED SPOON SPOON GOUGES GOUGES SKEWED These gouges are made especially for completing professional detail work. They combine the spoon curvature, so helpful in accessing tight spots in detail carving, with the point of a skew, so you can reach deep, detailed corners. The skew element also makes these tools shear through grain with ease. See Sweep Diagrams for tool profiles.

#2 Skewed Spoon Gouges

05L12 05L13 05L14 05L15

1mm left................ $28.99 1mm right.............. $28.99 2mm left................ $28.99 2mm right.............. $28.99

05L16 05L17 05L18 05L19 05O10 05O11 05O12 05O13 05L20 05L21 05L22 05L23 05L24 05L25

3mm left................ $29.99 3mm right.............. $29.99 5mm left................ $29.99 5mm right.............. $29.99 8mm left................ $34.99 8mm right.............. $34.99 12mm left.............. $34.99 12mm right............ $34.99 16mm left.............. $34.99 16mm right............ $30.99 20mm left.............. $34.99 20mm right.............$37.99 25mm left.............. $39.99 25mm right............ $39.99

FISHTAIL GOUGES GOUGES FISHTAIL A very useful tool for cleaning out corners and undercutting, particularly when side clearance is limited. See Sweep Diagrams for tool profiles.

#1 Sweep Fishtail Gouges

05V45 05M23 05V51 05M24 05V55 05M25 05F85

6mm........................$29.99 8mm........................$30.99 12mm......................$30.99 14mm......................$36.99 16mm......................$39.99 20mm.....................$34.99 25mm.....................$39.99

#3 Sweep Fishtail Gouges

05M26 05M04 05M05 05M06 05M27 05M12 05F86

6mm........................ $37.99 8mm........................ $37.99 12mm...................... $37.99 14mm..................... $38.99 16mm......................$44.99 20mm..................... $47.99 25mm.....................$53.99

#5 Sweep Fishtail Gouges

05M15 05M07 05M08 05M09 05M16 05M13 05F87

6mm........................$33.99 8mm........................$35.99 12mm......................$36.99 14mm......................$40.99 16mm..................... $46.50 20mm.....................$49.99 25mm.....................$49.99

#7 Sweep Fishtail Gouges

05M17 05M10 05M11 05N01 05M18 05M14 05F88

6mm....................... $32.50 8mm........................$34.99 10mm.....................$34.99 14mm......................$39.99 16mm......................$42.99 20mm.................... $48.50 25mm.................... $48.50

#9 Sweep Fishtail Gouges

05M19 05M20 05M21 05M22

94

BENT GOUGES GOUGES BENT Forged in the same sweep as the standard No. 5, 7 and 8 gouges with an additional lengthwise bend in the blade. This is necessary for roughing out and smoothing concave sections on sculpture and in bowls. See Sweep Diagrams for tool profiles.

#5 Sweep Bent Gouges

05J15 05S07 05N07 05N08 05S08 05F39 05F40 05F41

5mm........................$32.99 8mm........................$34.99 12mm......................$35.99 16mm..................... $38.99 20mm......................$42.99 25mm......................$44.99 30mm......................$51.99 35mm..................... $58.99

#7 Sweep Bent Gouges

05F42 05J16 05X55 05S09 05F43 05N03 05N04 05N05 05N06

4mm........................$34.99 6mm........................$34.99 10mm...................... $37.99 14mm......................$40.99 18mm......................$40.99 20mm......................$44.99 25mm......................$49.99 30mm......................$59.99 35mm......................$59.99

#8 Sweep Bent Gouges

05J17 05J18 05X85 05X91 05F44 05R03 05F45 05R04 05R05 05R06

4mm....................... $38.99 7mm........................ $38.99 10mm......................$39.99 13mm......................$39.99 16mm......................$40.99 18mm......................$42.99 20mm......................$44.99 25mm......................$44.99 30mm......................$56.99 35mm......................$59.99

5mm........................$36.99 10mm.....................$36.99 15mm.....................$43.99 20mm.....................$43.99

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving LONG BENT BENT V-TOOLS V-TOOLS LONG

HEAVY-DUTY GOUGES GOUGES HEAVY-DUTY Crafted to the same high standards as the rest of our S wi s s line, these new heav y- duty gouges are the perfect tools for roughing out large work or quick removal of waste stock. Hard-

wood handles feature double steel ferrules to prevent splitting. Overall length approximately 111/2", blade length approx. 51/2". 05G12 #1 60mm................ $87.99 05X24 #1 80mm..............$109.99 05G21 #2 60mm*..............$98.99 05G22 #5 60mm*..............$98.99 05G23 #7 60mm*..............$99.99 05G13 #9 50mm..............$124.99 05G24 *set of 3 Save $32!............ . ............................ $264.99

The long bend forged into this parting tool allows the carver to make roughing or detailing cuts on concave surfaces.

#12 Long Bent V-Parting Tools

05F46 05J19 05F47 05T01 05F48 05T02 05F49 05J20

2mm........................$36.99 3mm........................$38.99 4mm........................$38.99 6mm........................$38.99 8mm........................$42.99 10mm......................$42.99 12mm......................$49.99 14mm......................$49.99

#17 Sweep Stähli V-Parting Tools

Named for its designer, Brienz Woodcarving School master woodcarver, Mr. Stähli. Because of the slight curvature of its “V” (lightly concaved) profile this tool can function as a No. 2 gouge or as a “concaved” V-Parting tool. Great for outlining and rounding over edges at the same time. 05H20 3mm........................$36.99 05H21 6mm........................$42.50 05H22 20mm...................... $71.99

CHISELS CHISELS Carving chisels have two basic grinding styles, single or double bevel, and two profiles, skewed or straight. Double-beveled grinds are ground with two rounded heels. This allows for the rocking motion so necessary in controlling depth of cut. Single-bevel grinds are ideal for paring and delicate detailing. See Sweep Diagrams for tool profiles.

#1 Sweep Straight Chisel

Double Bevel

Single Bevel

05A01 05V81 05A02 05A03 05E15 05A04 05E19 05A05 05E23 05V91 05F22 05A06 05S05 05A08 05E27

2mm...... 05A12..... $28.99 3mm...... 05A15...... $30.99 5mm...... 05A16...... $32.99 8mm...... 05A19...... $34.50 10mm.....05E16..... $34.50 12mm.... 05A22...... $35.50 14mm.....05E20..... $33.99 16mm.... 05A24..... $35.50 18mm.....05E24..... $35.50 20mm.....05V02...... $39.99 22mm.....05F25..... $39.99 25mm.....05V04..... $41.99 30mm.....05V06..... $49.99 35mm.....05V08..... $49.99 40mm....05E28......$57.99

#1 Sweep Skew-Cut Chisel

Double Bevel

05V75 05V85 05A09 05A10 05E17 05A11 05E21 05B02 05E26 05V95 05F24 05B03 05S06 05B05 05E30

Single Bevel

2mm..... 05A13....... $27.99 3mm..... 05A18.......$28.99 5mm......05A17.......$30.99 8mm..... 05A21......$30.99 10mm....05E18......$32.99 12mm... 05A23......$32.99 14mm....05E22......$33.50 16mm....05V01......$32.99 18mm....05E25......$34.99 20mm....05V03...... $37.99 22mm....05F23...... $37.99 25mm... 05V05......$42.99 30mm....05V07......$48.99 35mm....05V09......$54.99 40mm...05E29......$56.99

pfeil® B

A

Octagonal Replacement Handles

The traditional octagonal shape of these handles provides a positive grip for controlling cuts in woodcarving and because of the flats, they do not roll. Made of unfinished European hardwood. 53/8" long, handling instructions included. A

05X01 05X02 05X03 05X04

9/ " 16 5/ " 8 11/ " 16 13/ " 16

B

3/ "................................................................................... $8.99 4 7/ "................................................................................... $8.99 8 15/ "................................................................................. $8.99 16 11/16"................................................................................. $8.99

PFEIL Swiss Made Abegglen Detail Knives

These unique detail knives are a resurrection of a lost, or little known, antique carving tool. Named after a Swiss family, these knives feature dual convex and concave edges that converge to a single point. The 4" shaft and smaller handle means you’ll be able to carve into hard to reach areas. Like all Swiss made tools, these follow pfeil’s legendary quality formula of a

special grade of hardened chrome vanadium steel that is ground and polished to a razor sharp edge. Approximate blade width is 3/8" for the small, 1/2" medium, 3/4" large. Overall length is approximately 71/2". Natural oil finished octagonal Acacia handle. 05B49 large........................$41.99 05B50 medium...................$41.99 05B51 small........................$41.99

Helping You Make Wood Work ®

95


Carving V-PARTING TOOLS TOOLS V-PARTING

VEINERS VEINERS

Forged and precision ground with straight sides and vee-bottom edge. Principal uses include outlining, rounding over edges with the straight side, adding detail, textures to backgrounds, undercutting, and applying decoration in chip carving. See Sweep Diagrams for tool profiles.

These gouges are more "U"shaped than any other sweep. They are wellsuited to fluting and preliminary outlining of relief carvings. Their shape allows them to make a clean, deep cut in one pass without fear of the corners of the tool digging in. See Sweep Diagrams for tool profiles.

#12 Sweep V-Parting Tools

05J04 05T75 05J05 05T81 05J06 05T85 05J07 05F34 05H14 05I12

1mm........................$30.99 2mm........................$32.99 3mm........................$32.99 4mm........................$33.99 6mm........................$34.99 8mm........................$34.99 10mm......................$39.99 12mm......................$42.99 14mm......................$44.99 20mm......................$64.99

#11 Sweep Veiners

123012 05I05 05I13 05I06 05I07 05T51 05I08 05I09 05I10 05F33 05I11 05J01 05F64 05J02 05J03

#13 Sweep V-Parting Tools

05T91 05T95 05H03 05V41 05H04 05T61 05H05 05F35 05H09 05H15 05H12

1mm........................$31.99 2mm........................$31.99 3mm........................$32.99 4mm........................$32.99 6mm........................$36.99 8mm........................ $37.99 10mm......................$38.99 12mm......................$40.99 14mm......................$45.99 20mm......................$66.99 30mm......................$84.99

BACK BENT BENT GOUGES GOUGES BACK With the curve reversed so the cutting edge is convex instead of concave. Used for carving or cleaning out the underside of a carving or cut. For getting a clean cut where top clearance is restricted. A specialized carving tool, but very useful. See Sweep Diagrams for tool profiles.

#14 Sweep V-Parting Tools

05F36 05H16 05H17 05H06 05H07 05H08 05F50 05H11

2mm........................$32.99 4mm........................$36.99 6mm........................$36.99 8mm........................$44.99 10mm...................... $47.99 12mm......................$48.99 14mm......................$50.99 20mm...................... $70.99

#20 Sweep Back Bent Gouges 05F70 05F71 05F72 05F77 05F81 05F82

#15 Sweep V-Parting Tools

05E44 05P07 05P08 05F37

.5mm.......................$29.99 1mm........................$29.99 1.5mm.....................$30.99 2mm........................$30.99 3mm........................$32.99 4mm........................$35.99 5mm........................$35.99 7mm .......................$35.99 10mm . ................... $37.99 12mm . ...................$39.99 15mm . ...................$40.99 18mm . ...................$40.99 20mm ....................$43.99 25mm......................$45.99 30mm......................$54.99

1mm........................$32.99 3mm........................ $37.50 6mm........................ $37.50 8mm........................$38.99

6mm........................$34.99 10mm.....................$35.99 13mm.....................$35.99 20mm.....................$36.99 25mm.....................$40.99 30mm.....................$44.99

#25 Sweep Back Bent Gouges

05J12 123010 05J08 05J09 05J10 05J11 05J13 05J14

2mm........................$34.99 3mm........................$34.99 6mm........................$36.99 10mm......................$39.99 13mm......................$39.99 20mm......................$39.99 25mm......................$42.99 30mm......................$43.99

#16 Sweep V-Parting Tools

05E45 05H18 05H19 05F38

1mm........................$36.99 3mm........................$38.99 6mm........................$42.99 8mm........................$42.99

FLUTERONI GOUGES GOUGES FLUTERONI

BENT V-TOOLS V-TOOLS BENT

With three working edges, only the sides are forged at a slight angle to the bottom creating a small radius on each side of the cutting edge. Functions as both a flat sweep and deep sweep gouge.

Similar to parting tools at the cutting edge, but formed with a short lengthwise bend, like spoon gouges. Use where straight shank standard tools would be awkward.

#24 Sweep Fluteroni Gouges

#12 Sweep Bent V-Parting Tools

05F96 05F13 05F14 05F15

4mm........................$35.99 6mm........................$36.99 8mm........................$43.99 12mm......................$46.99

05F60 05I02 05F61 05I04

1mm........................$29.99 3mm........................$31.99 6mm........................$31.99 8mm........................$36.99

#28 Sweep Back Bent Gouges

05R07 6mm........................$36.99 05R08 10mm...................... $37.99

MACARONI TOOLS TOOLS MACARONI A multi-purpose tool with three working edges, sides forged obliquely to the bottom edge, and ground with an outside bevel. Functions as a chisel and V-parting tool making it possible to follow sweeping inside and outside curves and to remove shallow backgrounds in relief carving.

05P02 8mm........................$45.99 05P03 12mm......................$50.99

#23 Sweep Macaroni Tools

05F95 4mm........................$36.99 05G25 6mm........................$36.99

96

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving WING V-TOOLS V-TOOLS WING Similar to V-Parting tools except for the curvature of each side of the vee. This curve softens work by rounding the top of the carved edge. Used for outlining and adding detail, but is particularly useful for carving scripts and other ornamental decorations.

05F94 05H23 05H24 05H25

B

A PFEIL Carving Support And Carver's Screw

#22 Sweep Wing Parting Tools

4mm............................................. $45.99 6mm............................................. $46.99 8mm..............................................$47.99 12mm........................................... $53.99

From the makers of the World’s finest carving tools comes a practical carving support made from solid Beech. The support is clamped into your workbench's vise and used in conjunction with the carver's screw (sold separately) to provide you with unlimited accessibility to your work piece. To use the carver's screw, simply drill a hole into your blank, and screw it into your work piece, slide through the slot in the carving support and tighten the wing screw to secure. 05E75 (A) carving support 700mm.......... $131.99 05E76 (B) carver's screw 240mm............$104.99

PFEIL Swiss Made Fishtail Gouge Set

Fishtail gouges are designed for use with a mallet and perfect for quick removal of waste and for large scale projects. Like all Swiss made tools, these follow pfeil’s legendary quality formula of the highest grade, hardened steel, polished and ground to a razor sharp edge. Approximate blade length is 51/2" with overall length of approximately 111/2". Includes 60mm skewed Dräyer Gouge, 60mm #2, 60mm #5, and 50mm #7 Fishtail Gouges. Natural oil finished hornbeam handle with heavy duty ferrules. 05B48 4-pc. Fishtail Gouge Set............... $399.99

PFEIL Swiss Made Intermediate Carving Tools

Specially forged for Woodcraft, these intermediate size, professional-style tools are 2" shorter than our regular pfeil Swiss made tools for easier control and greater responsiveness. They are carefully sharpened, honed, and buffed for immediate use. The combination of high-grade tool steel and precise tempering results in an edge that will stay sharp for many enjoyable hours of woodcarving. Beginning carvers will find these delicately balanced tools well-suited to their needs, and experienced carvers often prefer them for getting into confined areas. 8" overall length with 31/2" blades and 41/2" octagonal hardwood handles. 05Q01 05Q02 05E70 05E71

8mm No. 1 double bvl straight*.$21.99 8mm No. 1 double bvl skew .**$23.99 12mm No. 1 double bvl straight.$27.99 12mm No. 1 double bvl skew.....$27.99 #1S

#1D

A

05Q13 05E63 05E64 05Q14

4mm No. 7 gouge ***................ $28.50 6mm No. 7 gouge........................ $28.50 10mm No. 7 gouge..................... $28.50 14mm No. 7 gouge ***.............. $28.99 #7D

05R01 05E51 05R02 05Q22 05E68

2mm No. 12 V-parting **........... $26.99 6mm No. 12 V-parting***......... $26.99 8mm No. 12 V-parting *............. $26.99 6mm No. 14 V-parting................ $29.99 3mm No. 15 V-parting................ $29.99 #12D

#15 #14D

05E59 05E60 05Q17

5mm No. 2 gouge....................... $26.99 8mm No. 2 gouge........................$27.99 12mm No. 2 gouge ***.............. $29.99

05E65 4mm No. 8 gouge....................... $26.99 05Q05 7mm No. 8 gouge **...................$27.99 05Q18 10mm No. 8 gouge ***............. $29.50 #8D

#2D

05E61 05E62 05E67

5mm No. 3 gouge........................$27.99 8mm No. 3 gouge........................$27.99 12mm No. 3 gouge......................$27.99 #3D

05Q15 10mm No. 7 bent gouge ***..... $28.99 #7DL 05E69 8mm No. 5 spoon gouge............ $28.99 05Q10 7mm No. 8 spoon gouge *......... $29.50 #5DA

05Q03 3mm No. 5 gouge **.................. $25.99 05Q04 8mm No. 5 gouge *.....................$27.99 05Q16 12mm No. 5 gouge ***............. $29.50 #5D

#8DA

05E66 2mm No. 9 gouge........................$27.99 05Q06 5mm No. 9 gouge **...................$27.99 05Q07 10mm No. 9 gouge *.................. $28.99 #9D

05Q08 1mm No. 11 veiner **................ $29.99 05Q09 3mm No. 11 veiner *.................. $29.99 #11D

Intermediate Carving Sets

Complete set includes tools marked (*) and (**) in hardwood stand and includes 08GO8 81/2 ounce Brienz carving mallet; 08Y22 and 08Y32 hard and soft Arkansas stones; and 09L11 15-pocket tool roll. The twelve profiles are among the most basic and useful in woodcarving: 8mm chisel; 8mm skew; 3mm and 8mm No. 5 gouges; 7mm No. 8 gouge; 5mm and 10mm No. 9 gouges; 1mm and 3mm veiners; 7mm No. 8 spoon gouge; plus 2mm and 8mm No. 12 V-parting tools. Includes tool rack shown above. 05B59 (A) set of 12 tools.......................... $249.99 13D15 complete set................................. $329.99 6-Piece Intermediate Sets. Due to customer demand, the 12-pc. set above has been broken down into two 6-pc. sets. Sets include those tools marked as shown. 05H02. set of 6 tools* Save Over $34! . $129.99 05H10. set of 6 tools** Save Over $32! .$129.99 Set of 7 Intermediate Tools. Contains profiles not available in the sets described above. 05Q20 set of 7 tools***Save Over $67! .$134.99

Helping You Make Wood Work ®

97


Carving pfeil® PFEIL Swiss Made Brienz Collection Carving Set

If you want to own the finest carving tools in the world, this is the set for you. The Swiss carving tools in this premiere, set were chosen in collaboration with Mr. H. P. Stähli, Master Woodcarving Instructor at the world renowned Kantonale Schnitzlerschule Brienz woodcarving school in Brienz, Switzerland. Tool set includes: #1 Straight Chisel 16mm, #1 Skew Cut Chisel 16mm, #2 Gouge 20mm, #3 Gouge 3mm, #3 Gouge 12mm, #3 Gouge 25mm, #5 Gouge 35mm, #7 Gouge 20mm, #8 Gouge 7mm, #8 Gouge 18mm, #8 Gouge 25mm, #8 Spoon Gouge 18mm, #7 Heavy Bent Gouge 25mm, #9 Gouge 7mm, #9 Gouge 15mm, #11 Veiner 2mm, #11 Veiner 10mm, #15 V-Parting Tool 3mm, #12 V-Parting Tool 10mm, #14 V Parting Tool 8mm, and a Brienz Carver’s Knife. In addition to these 21 Swiss carving tools, you’ll complete your set with a 141/2 oz. beech carving mallet, a No. 1 and a No.2 Arkansas honing stone, and one 4 ounce container of sharpening oil, all conveniently packaged in a rugged pfeil canvas storage roll. 05B58 ...................................................$799.99

pfeil®

B

A

PFEIL Swiss Made Brienz Professional Carving Sets Twelve superior quality carving tools, preferred by professionals for the most demanding projects. Blades of polished tool steel are precision-tempered, ground and sharpened at the factory for immediate use. Octagonal, non-slip, non-rolling European hardwood handles. One each as follows: 5mm and 8mm straight chisel, 8mm skew, 12mm No. 5 gouge, 20mm No. 5 gouge, 6mm No. 7 gouge, 10mm No. 7 gouge, 4mm No. 8 gouge, 10mm No. 8 gouge, 10mm No. 9 gouge, 3mm No. 11 veiner and 6mm No. 12 V-parting tool. Overall length of tools, 10". Complete set comes with deluxe canvas tool roll containing individual pockets for each tool, soft Arkansas multiform slipstone for preliminary sharpening, hard Arkansas multiform slipstone for final finishing, and a 141/2 ounce beech Brienz mallet with 31/8" diameter head. Set is over $419 in value! 05B57 (A) Swiss Brienz 12-pc., in roll.........$339.99 13F10 (B) complete set Save Over $114!... $389.99

PFEIL Swiss Made Professional Carving Set

6-Piece Professional Set

Not sure which shapes to start with? We recommend this set of 6, shown in bold above, made up of the most popular tools from our set of 12. Individual tools from our vast selection may be added later when the sizes and shapes needed for your type of work are discovered. 05W20 6-pc. Set only Save Over $36!....$152.99

Set of 6 Pfeil® “Swiss Made” Professional Carving Tools is made up of the most popular tools from our set of 12. Not sure which shapes to start with? We recommend this set. Includes 8mm straight chisel, 12mm No. 5 gouge, 10mm No. 7 gouge, 10mm No. 9 gouge, 3mm No. 11 veiner, and 6mm No. 12 V-parting tool. Individual tools from our vast selection may be added later when the sizes and shapes needed for your type of work are discovered. 05W20 6 tools only Save Over $30! .... $152.99 05B57 (A) Swiss Brienz 12-pc. set........$339.99 13F10 (B) complete set Save Over $113!.......... . ................................................... $389.99

pfeil® PFEIL Swiss Made Brienz Intermediate Set

Following the introduction of the Swiss Brienz Collection, we had many requests for a similar boxed set in the Swiss Intermediate carving line. We are happy to introduce a boxed, 18-piece Swiss Intermediate carving tool set which not only includes the 12 tools of the original set (05H01), but also includes 6 new profiles never offered before. The new profiles featured in this boxed set are a 4mm #7 Gouge, 14mm #7 Gouge, 10mm #7 Bent Gouge, 12mm #5 Gouge, 12mm #2 Gouge, and 10mm #8 Gouge. The remaining 12 profiles are 8mm Straight Chisel, 8mm Skew Chisel, 3mm #5 Gouge, 8mm #5 Gouge, 7mm #8 Gouge, 5mm #9 Gouge, 10mm #9 Gouge, 1mm #11 Veiner, 3mm #11 Veiner, 7mm #8 Spoon Gouge, 2mm #12 V-parting, and 8mm #12 V-parting. The lacquered beech box has a sliding top, with individual tool compartments for each tool. 05Q21 ................................................................................... $494.99

98

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving pfeil®

PFEIL Carving Adzes and Hatchet

pfeil® PFEIL Swiss Made Sculptor’s Set

Includes the six most useful sizes and styles for three-dimensional figure carving. The steel blades will take the hard use necessary for roughing out a block and hold the razor-sharp edge vital to a clean, crisp surface. Set includes 30mm chisel; 30mm

A

B

C

D

E

skew; 30mm No. 5 gouge; 30mm No. 7 bent gouge; 35mm No. 9 gouge; and 20mm No. 12 V-parting tool; 4" diameter head, 231/2 oz. beech Brienz mallet, and 15-pocket canvas tool roll. 13G10 complete set Save Over $63!... $349.99 13G20 6 tools only Save Over $55!......$264.99

F G

H

I

J

K

L

M N

Our newest tools from pfeil are perfect for those large carving or timber framing projects and feature the same attention to detail and high quality as our world famous Swiss made carving tools. Premium tool steel is hardened to 56-58 Rc to create a durable, resilient cutting edge, which stays sharp longer. All tools feature “through eye” forging and come handled, ready for use. Solid ash handles are unfinished. Carving Hatchet has a 5" cutting edge with an overall tool length of 18". 05Z98 . ......................................................$120.99 Straight Head blade is 3" wide; overall tool length is 18". 05Z96 . .......................................................$117.99 Curved Head blade is about 21/2" across, with a curve that approximates a #9 sweep carving tool profile. Overall tool length is 18". 05Z97 . ......................................................$122.50 Small Curved Head adze’s blade is about 2" across, also with a curve that approximates a #9 sweep. Overall tool length is 11". The tool’s smaller size makes it a perfect bowl adze. 05Z99 . ......................................................$139.99

PFEIL Swiss Made #14 Roughing Knife PFEIL Swiss Made Chip Carving Knives

pfeil®

The superb quality of our exclusive pfeil Swiss made tools is also available to chip carvers. This set of knives was designed especially for chip carving, but is also useful for whittling, carving, and even layout work. Forged of special alloy tool steel, blades hold their edge longer than most other knives of this type. Pre-sharpened for immediate use. Overall lengths between 51/4" to 71/2". Rc 57-60 hardness. 05Z10 chip carving set (B & I)..................$24.99 05Z20 whittler's set (A, G, K & L)............ $54.99 05Z11 A..................................................... $17.99

05Z21 05Z31 05Z41 05Z51 05Z61 05Z71 05Z81 05Z91 05Z95 123011 123014 05Z93 05F97

B.................................................... $16.99 C.................................................... $14.99 D.................................................... $14.99 E.................................................... $19.50 F.................................................... $18.50 G.................................................... $14.99 H.................................................... $14.99 I..................................................... $15.99 J..................................................... $14.99 K.................................................... $19.99 L.................................................... $19.99 M................................................... $24.99 N.................................................... $24.50

This robust knife features an extrathick 1 7/8" long x 11/ " wide blade. 16 Perfect for roughing out carvings, making heavy cuts, or as an all-round bench knife. The shape also allows this knife to be used for large scale chip carving. 73/4" overall length. 05Z94 .....................................................$26.99

PFEIL Swiss Made Drawknives

PFEIL Swiss Made Scorps

These scorp, or inshaves follow pfeil’s legendary quality formula - a special hardened alloy of chrome-vanadium steel, ground and polished to a razor sharp edge, ready to use right from the box. The 11/4" wide blade will last a lifetime. The single handle has 21/2" blade radius, while the double handle has 5" flattened radius cutting face. Both feature 5" natural oil finished Cherry handles. 05B55 65mm, single handle................. $79.99 05B56 160mm, double handle..............$89.99

PFEIL Swiss Made Scorp

A roughing-out tool for making bowls, spoons, and similar concave shapes. The comfortable hardwood handle can be gripped firmly for quick, accurate cuts. The thick shank reduces chatter and increases accuracy. Width of offset blade 11/4", 7" overall length. Honing required before use. 11V51 .................................................... $37.99

Finely machined from the best alloy tool steel, each drawknife is shaped to give optimum control when shaping blanks or making critical finishing cuts. Feature hand-turned nonslip cherry handles; ample finger space around blades for safe holding during use; presharpened, single-beveled cutting edges to shear wood effortlessly and rehone easily. Exceptional tools. Straight Drawknife. Blade 5" long x 7/8" wide, overall length 121/2". 05T11 . ..................................................... $56.99 Carver’s Drawknife. Blade 41/2" long x 7/8" wide. 05T12 ........................................................$63.99 Large Carver’s Drawknife. Blade is slightly convex, 91/2" long x 1" wide, 17" overall. Includes leather sheath. 05Z03 ...................................................$106.50

Helping You Make Wood Work ®

99


Carving pfeil® 6-Piece Palm Set B** Includes: 3mm No. 5 gouge; 6mm No. 7 gouge; 10mm No. 7 gouge; 5mm No. 9 gouge; 1mm No. 11 veiner; 1mm No. 12 V-parting tool. 05V11 set (B) Save Over $22!...................$119.99 6-Piece Palm Set C. Includes: 2mm No. 15 V-parting; 4mm No. 12 V-parting; 0.5mm No. 11 veiner; 2mm No. 9 gouge; 7mm No. 8 gouge; 3mm No. 8 gouge. Sorry, not available individually. 05Y75 set (C) .................................................. $149.99

PFEIL Swiss Made Palm-Handled Carving Sets

Designed for wood block carving, yet furnituremakers and decoy carvers like their 43/4" length for delicate, intricate work. Hardwood handles fit the palm of your hand so your fingers can guide and control the action of the razor-sharp blade. Half-round handles make long, low cuts easier and prevent the tools from rolling off your workbench.

6-Piece Palm Set D. Includes: 4mm No. 1 chisel; 4mm No. 1 skew chisel; 5mm No. 5 gouge; 4mm No. 7 gouge; 7mm No. 8 gouge; 2mm No. 11 veiner. Sorry, not available individually. 05E58 set (D) . ............................................... $134.99 12-Piece Palm Set includes all tools of Set A and B above plus a 12-place storage rack. 05Y70 12-pc. set Save Over $110!.........$219.99 05Y71 12-place storage rack ...................$43.50

8-Piece Swiss Palm Sets

8-Piece Palm Set A + Includes: 8mm No. 12 V-parting, 10mm No. 9 gouge, 10mm No. 8 bent gouge, 14mm 6-Piece Palm Set A includes 8mm chisel; 8mm skew; No. 7 gouge, 12mm No. 5 gouge, 12mm No. 3 gouge, 8mm bent chisel; 8mm No. 5 gouge; 3mm No. 11 veiner; 12mm No. 1 gouge, 12mm No. 1 skew chisel. Sets include an 8-place wood storage rack. 4mm No. 12 bent V-parting tool. 05P01 set (A) Save Over $21!............... $119.99 05Y10 .8-piece palm set (A) Save Over $58!...$184.99

6-Piece Swiss Palm Sets*

8-Piece Palm Set B includes the following eight tools: 12mm No. 2 gouge, 12mm No. 4 gouge, 12mm No. 7 bent gouge, 10mm No. 8 gouge, 7mm No. 9 gouge, 7mm No. 11 gouge, 6mm No. 15 V parting, 10mm No. 25 back bent gouge. Sorry, not available individually. 05F98 8-piece palm set (B) ...................$179.99 05D01* 8mm chisel.................................... $23.50 05R09* 8mm skew..................................... $24.99 05T41* 8mm bent chisel........................... $23.50 05X11* 8mm No. 5 gouge......................... $23.99 05Y12* 3mm No. 11 veiner....................... $24.50 05Y22* 4mm No. 12 bent V....................... $23.99 05Y32** 3mm No. 5 gouge......................... $22.50 05Y42** 6mm No. 7 gouge.......................... $22.99 05Y52** 10mm No. 7 gouge........................ $22.99 05Y62** 5mm No. 9 gouge......................... $25.50 05Y82** 1mm No. 11 veiner....................... $23.99 05Y92** 1mm No. 12 V-parting.................. $24.50 05Y01+ 8mm No. 12 V-parting...................... $27.99 05Y02+ 10mm No. 9 gouge...........................$26.99 05Y03+ 10mm No. 8 bent gouge..................$26.50 05Y04+ 14mm No. 7 gouge............................$28.99 05Y05+ 12mm No. 3 gouge...........................$24.50 05Y06+ 12mm No. 5 gouge...........................$24.50 05Y07+ 12mm No. 1 gouge...........................$26.50 05Y08+ 12mm No. 1 skew chisel..................$22.99 05Y90+ 8-place storage rack.........................$34.99 Replacement Palm Tool Handle of unfinished European hardwood. 05Y99 extra handle....................................... $8.50

A

B

RAMELSON Carving Tools

These tools feature hardwood handles with a metal ferrule. Comfortable 61/4" to 61/2" lengths make them easy to control for detail carving. Factorysharpened and ready for use. Made in the USA of high-carbon tool steel. 127159 12 tools only Save Over $23! .$135.99 127145 1/4" No. 9 gouge............................$16.99 127146 5/16" No. 8 gouge..........................$16.99 127147 3/8" skew.......................................$16.99 127148 3/8" No. 7 gouge............................$16.99

127149 3/8" chisel......................................$16.99 127150 1/4" V-parting.................................$18.99 127151 (A) set of 6 tools above................$79.99 127152 127153 127154 127155 127156 127157 127158

3/ " No. 9 gouge............................$16.99 8 3/ " No. 5 fishtail gouge...............$16.99 8 1/ " No. 5 fishtail gouge...............$16.99 2 1/ " No. 9 gouge............................$16.99 4 5/ " V-parting................................$16.99 32 5/ " U-veiner.................................$16.99 32

(B) set of 6 tools above . .............$79.99

Pineapple courtesy of Ken Kupsche, Parkersburg, WV.

RAMELSON Beginner’s Carving Tools

Highly recommended for the new carver doing simple or detailed work. Set includes six tools: 5/16" chisel, 5/ " skew, 5/ " bent chisel, 9/ " straight gouge, 5/ " 16 16 64 16 bent gouge, and 9/64" bent V-parting tool. Made of high-quality tool steel, factory-sharpened and ready for use. Overall length 61/8", blade 21/2". 14I21 set of 6..........................................$39.99

Carver’s Spoon Plane

Rick Bütz Carving Knives

Shown in his books and television series, Rick developed these tools to provide carvers with knives that are easier to hold, more efficient in cutting, and safer to use. A special forward notch in the cherry wood handle safely puts your hand closer to the blades, and you’ll find you have more power and control with this feature. The oil finish protects the knife handle and gives greater holding power than regular lacquered “slick” finishes. All these features make the Bütz knives carving tools that are sure to please woodcarvers of all skill levels. Require honing before use. Germany. (A) Carving Knife. This is the knife that Rick uses for roughing out, shaping and general whittling. Sheepsfoot-style blade is set deep in the cherry wood handle with a cutting edge that starts right at

100

B A the handle. Blade is 17/16" long, handle 53/4" long. 18S22 ....................................................... $17.99 (B) Detail Knife. This is the blade profile that Rick has been hand-shaping for his detail work. The 1 7/16" blade has just the right taper for both maneuverability and strength. Like the carving knife, the blade is set deep into the cherry handle with a cutting edge that starts right at the handle. The ultimate tool for the important final cuts that separate an average carving from a master carving. 18S23 ....................................................... $17.99 18S30 set of 2 Save Over $6! ..............$29.95

Credit Card Orders: 800 225-1153

Easy to control and quick cutting, our spoon plane quickly and easily makes hollow or dishedout cuts. Perfect for spoons and bowls it can also be used to smooth the surface of large carvings. Made of cast bronze, then coated with titanium nitrate for a super-smooth finish, the plane features a large comfortable handle for extended use. Plane is 1 3/4" wide, 61/8" long, with a 13/8" wide blade. Requires honing before use. 144822 ....................................................... $19.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Carving A

C

E G

FLEXCUT™ Carvin’ Jack

Carry a complete carving kit in your pocket! The blades of this unique carving tool fold into their handle just like a pocket knife’s blades. Professional carvers will love the high quality edge-holding features of Flexcut’s resilient spring-steel blades. The Carvin’ Jack features six tools: 3/4" #7 sweep knife blade; 3/8" #6 scorp; 3/8" #11 gouge; 3/8" #1 straight chisel; 13/8" detail carving knife; 1/4" 70° V scorp. All tools securely lock in both opened and closed positions. Conveniently sized at only 41/4" long, 15/16" tall, and 5/8" thick when closed, about the same size as a large pocket knife. Carry it with you, and you’ll never be caught without carving and whittling tools again! 145445 right-hand model.......................$129.99 145485 left-hand model.........................$139.99

Two-Blade Folding Carving Knife

Features a chip and detail blade so you can carve any time! The 1" long high-carbon stainless steel blades offer excellent edge retention and inhibit rust. The high-strength, ergonomically shaped handle is made of stainless steel with Pakawood inlays. Closed, length is 31/4" and a slim 7/16" thick fits comfortably in your pocket. 831906 . ................................................... $19.99

Leather Thumb Guards Protect Thumbs Or Fingers While Carving

Made of split leather with an elastic cloth backing and closed end for extra fit and safety. 16V22 small - children..........................pair $3.99 16V23 medium - adult female.............pair $3.99 16V24 large - adult male......................pair $3.99

B

D

F

FLEXCUT™ Knives

Made with Flexcut’s high-quality spring steel, tempered to a hardness of Rc 59-61, and fitted with tremendously comfortable ash handles, these knives perform as marvelously and hold an edge as well as Flexcut carving tools. There’s a knife for every cutting and shaping application. Presharpened for immediate use. 814845 (A) chip carving knife.....................$18.99 814266 (B) cutting knife ........................... $18.99 814267 (C) detail knife ..............................$19.99 147461 (D) mini detail knife.......................$23.99 814265 (E) skew knife .............................. $18.99 814268 (F) large cutting knife . .................$22.50 820598 (G) pelican knife............................$22.99

B

FLEXCUT™ Starter Kit Bonus: FREE Relief Carving DVD!

A complete carving set all in one box. Seventeen cutting tools, two interchangeable handles and a SlipStrop to keep them all sharp! Everything you need for mallet, palm or knife carving. Set includes a 5/ " #1 chisel, 9/ " #2 skew, 1/ " and 7/ " #3 gouges, 8 16 4 8 1/ " #5 gouge, 1/ " #6 gouge, 1/ ", 3/ " and 11/ " #8 8 2 4 8 16 gouges, 9/16" #9 gouge, 1/16" #11 gouge, 3/16" and 1/ " #11X thumbnail gouges, 5/ " 45° V-tool, 3/ " 2 32 8 70° V-tool, 7/8" back bent gouge, cutting knife, ABS quick-connect palm handle, quick-connect Power Handle, SlipStrop and compound. All neatly packed in a wooden storage case. Also includes the DVD Relief Carving In A Different Light by David Bennett. A $14.95 value, yours FREE! 146913 ...................................................$179.99

A

B

A FLEXCUT™ Handed Hook Knife

Made with Flexcut’s high-quality spring steel, tempered to a hardness of Rc 59-61, and fitted with smaller faceted Ash handles designed for multiple gripping styles and many hours of comfortable carving. The hook knife blade is curved similar to a gouge for working in hollows with ease and allows for fast stock removal. The handedness (right or left) is designated by pulling the tool toward you. 836554 (A) right handed..........................$24.95 836555 (B) left handed............................$24.95

FLEXCUT™ Profile Carving Scrapers

Cabinet scrapers have been used for years to finish flat or simple contour surfaces. Flexcut has used this same idea to create scraper blades which provide a variety of profiled scraping edges. In just a few strokes you can remove any uneven surface or finish from any contour without the use of sandpaper. Not only does this save the crisp details of your work, but it also saves you money too! Set includes six profiles and power handle. Palm handle sold separately. 151339 .....................................................$49.99 815644 (A) palm handle, only.................. $13.99 815645 (B) power handle, only................ $14.99

Woodcarver’s Safety Glove

FLEXCUT™ Scorp Set

A Scorp is essentially a right-angled gouge designed for carving in areas where the full length of a gouge will not fit. Knife carvers find them useful for hollowing deep, narrow cavities. Included tools are 1/ " and 3/ " deep gouges, a 5/ " shallow gouge, 8 16 16 and a 3/16" 60° V, all with razor-sharp high-carbon steel blades. Our set contains these four versatile profiles, a scorp strop specifically designed to help you keep your edges razor-sharp, and a convenient four-pocket tool roll for storage. 144775 .......................................................$89.99

The greatest protection possible against the hand and finger injuries that often result from accidental knife slips. Made from a patented combination of Kevlar, Spectra and stainless steel, this glove is unsurpassed for cut resistance, durability, softness and wearability. Gloves are ambidextrous, tend to run large and can stretch. If in doubt, order one size smaller. Measure around your hand at the fullest part without your thumb: the diameter in inches equals your glove size. USA. 142886 extra extra small, 3" - 4"..............$22.99 06I64 extra small, 4" - 5"........................$22.99 06I61 small, 5" - 6".................................$22.99 06I62 medium, 7" - 9".............................$22.99 06I63 large, 9" - 11"................................$22.99

FLEXCUT™ Drawknives

Made from the same resilient spring steel as Flexcut’s Palm Tools, these carver’s drawknives flex in either direction to do round or hollow work. Hand-honed and polished to a razor-edge and perfectly suited for rough or delicate shaping. Fitted with ash handles similar to the Flexcut Palm Tools. 814846 5" curved blade.............................$39.99 145370 3" straight blade........................... $37.99

Helping You Make Wood Work ®

101


Carving KING ARTHUR Holey Galahad�®

1.5mm set

2mm set

DOCKYARD Micro Carving Tools

3mm set

are individually hand-forged, tempered to Rc58 for a durable edge, and tested to ensure proper sharpness and edge profile. Overall lengths 5" with 4" octagonal cherry wood handles. Sets contain: single and double-bevel chisels, double-bevel skew chisel, 90° V-parting, and No. 11 U-gouge. Sharpened and ready for use. 17K41 1.5mm width set......................... $44.99 17K21 2mm width set............................. $44.99 17K51 3mm width set............................. $46.99 Additional Micro Carving Sets (not photographed) will increase the scope of your detail work. Made with the same fine steel and craftsmanship as our other micro tools. Presharpened and ready to use. Micro Carving Expansion Set. Useful shapes include 2.4mm and 3.25mm dogleg chisels, 75° V-parting, 4mm No. 9 gouge, and 5mm No. 8 gouge.

Micro Sculpture Set includes 4mm No. 9 gouge, 3mm and 2mm No. 11 gouges, 2mm 90° V-parting and 2mm double-bevel chisel.

17L31

01L42 ............................... ea. $10.99 .......... $9.89

set of 5......................................... $51.99

17N10

set of 5......................................... $51.99 Micro Gouge Set includes 5mm No. 8 gouge; 4mm No. 9 gouge; 3mm, 2mm and 1.5mm No. 11 gouges.

These discs provide a unique ability to see the surface you are carving as you work. Holey Galahad quickly allows you to shape peaks and valleys into smooth surfaces as you see them, eliminating the need to “feel” the high and low spots. The extremely sharp, long-wearing conical teeth provide superior surface removal with a very smooth action. Made of durable tungsten-carbide and available in round and flat profiles. Available in coarse, medium and fine grits. 149989 round coarse, blue......................$89.99 149990 round medium, red.....................$89.99 149991 round fine, green........................$69.99 149992 flat coarse, blue.......................... $79.99 149993 flat medium, red......................... $79.99 149994 flat fine, green.............................$69.99 King Arthur Universal Mounting Nut. Specially designed for mounting tandem combinations of Lancelots, Lancelots/Squires and Holey Galahad. Fits all 5/8" x 11 TPI arbors. 149995 ....................................................... $9.99

17N50   set of 5.......................................... $52.99 Micro Dogleg Chisel Set includes 3.25mm, 2.75mm, 2.4mm and 2mm dogleg chisels. 17N60   set of 4.......................................... $44.99 Micro Carving Tool Pouches are made of handstitched heavy canvas with flip top, and hook & loop closing strips. Will hold five micro carving tools.

B

3+ 

A

LANCELOT Wood Carving Discs (A)

The special chainsaw blade is securely held between two stainless steel plates. Mount the 4" dia. Lancelot in your 4" or 41/2" angle grinder and it easily cuts the hardest woods regardless of grain or knots. The 14-tooth model is great for “roughing-out”, the 22-tooth model leaves a smoother “finished” surface. Teeth can be resharpened using a standard chainsaw file. Maximum 14,000 RPM, chains can not be interchanged between models.

PFEIL Drake Undercutting Tools

Designed especially for relief carving. The shape and size of the cutting edge allows precise and controlled undercuts in hard to access areas. 05X21 undercutting tool left....................$35.99 05X22 undercutting tool straight.............$35.99 05X23 undercutting tool right..................$35.99

Give The Perfect Gift! Give the Woodcraft Gift Card anytime of year. It’s the ideal gift for family and friends, because they can choose just what they have in mind.

102

MERLIN Power Carver

Carve, cut, shape and sand with one tool! The special 8-tooth chain disc, which is mounted between two stainless steel plates, easily cuts the hardest of woods regardless of grain or knots. Only 2" in diameter it reaches into tight areas which previously had to be carved and smoothed by hand. You can rough out with the chain disc, then smooth and finish shaping with the tungsten-carbide disc and 100-grit flap sanders. These discs are designed to be driven by the powerful and proven Proxxon long-neck mini grinder, which features electronic speed control from 3,300 to 13,000 rpm. Merlin Set includes an 8-tooth carving disc, flat-profile tungsten-carbide disc, silicon-carbide grinding wheel, 100-grit flap sander, aluminum oxide cut-off wheel, a molded storage case and instructions. All discs have a 10mm arbor. 145644 complete Merlin Kit................. $204.99 145645 2" 100 grit flap sander.................. $6.99 145646 2" 150 grit flap sander.................. $6.99 145647 2" tungsten-carbide coarse disc...$39.99 145648 2" tungsten-carbide med. disc...... $39.99 145649 2" stone carving disc..................$39.99 145650 8-tooth chain disc....................... $14.99

Credit Card Orders: 800 225-1153

04D02 04D04 04D06 04D07 04D03 04D05

Teeth

Arbor

.14............... 5/8"..............................$44.99 .22............... 5/8"..............................$44.99 .14............... 7/8"..............................$44.99 .22............... 7/8"..............................$44.99 .replacement 14T chain.................$23.99 .replacement 22T chain................$23.99

SQUIRE Mini Carving Discs (B)

Can be attached to another disc for fhe ultimate in power carving! Although it can be used alone as a small carving disc, by attaching the 33/8" dia. Squire to a Lancelot disc with the Universal Mounting nut (below) you can effectively double your cutting capacity. Remove waste material faster and curved work is easier and smoother than using a single disc. Fits all mini grinders with 5/8" x 11 TPI arbors. 127230 Squire with 12 tooth chain...........$44.99 127231   Squire with 18 tooth chain...........$44.99 King Arthur Universal Mounting Nut. Specially designed for mounting tandem combinations of Lancelots, Lancelots/Squires and Holey Gallahad. Fits all 5/8" x 11 TPI arbors. 149995 ....................................................... $9.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Carving 1/ 4

HP Flexible-Shaft Carver Kit

Tackle a complete range of projects with this heavyduty Power Carving Kit – from fine detail work with smaller burrs to roughing-out at a much greater speed than you could with less powerful motors. And, the powerful 1/4 hp motor is reversible – a bonus for left-handed carvers. This carver has a super flexible 42" shaft that does not require lubrication, eliminating the messy chore of disassembling and greasing the shaft. The kit includes a 1/4 HP, 20,000 rpm motor, variable-speed heavy-duty foot control pedal, standard rotary handpiece, 3 collets (3/32", 1/ ", 1/ "), wrench, and tool hanger. 120V. 8 4 147220 1/4 HP carving kit........................$179.99 147221 outer sheath................................ $11.99 147222 cable............................................. $10.99 147223 motor brushes for WE-330R......... $4.50

A

FOREDOM Flexible-Shaft Tools 1/ 6

HP 5200 SR Deluxe Kit combines the best and most important features in a flexible-shaft tool: • More Power - 1/6 HP, 33% more power than the Foredom Series S motor. • Reversible - great for left-handed users. • Reliable - Two-year manufacturer’s warranty. Includes the SCT foot control, No.44T handpiece, 3/ ", 1/ " and 1/ " collets, No.28 handpiece with 32 8 4 1/ " and 3/ " collets, safety glasses, plus a 47-piece 8 32 woodcarver’s professional accessory kit. The kit includes purple ceramic sanding bands & discs, V-stones, ScotchBrite radial bristle discs, Typhoon carbide burrs, CeramCut blue stones, rotating burr and bit holder plus a small round burr holder with lid. 0-18,000 RPM. 146886 (A)............................................... $354.99 1/ HP TX Flexible Shaft Kit. From start-up to full 3 speed the TX permanent magnet DC motor delivers more torque with complete control. The TX motor, made with the most advanced rare-earth magnets, delivers more torque in the low, medium and full speed range. This new level of power makes the TX ideal for lower-speed jobs like carving with large burrs. Kit includes TX hang-up motor, No. 44T handpiece with 3/32", 1/8" and 1/4" collets, pin & wrench, woodcarving accessory kit with 12 different grinding tips, spare motor brushes and shaft grease. 0-15,000 RPM. 146888 .................................................... $374.99

Accessories:

Foot-Operated Speed Control. Regulates motor speed, leaving hands free to hold tools and workpiece. Can be used with most flexible-shaft kits. Cord length is 74". 147226 (A)..................................................$39.99 Motor Hanger With just the twist of a knob, you can clamp this hanger to your work surface. Since the sturdy post is comprised of 3 rigid-steel tubes that screw together, you can also vary the height of the hanger from 13" to 40". 147225 . .....................................................$25.99 Standard Handpiece Provides great control for detail work and makes it easy to get into hard-to-reach areas. This ergonomic handpiece fits comfortably in your hand because of its tapered end. Comes with 3/32", 1/8", 1/4" collets and wrench. 147231 standard handpiece....................$43.99 147232 3/32" collet....................................... $4.99 147233 1/8" collet......................................... $4.99 147234 1/4" collet......................................... $4.99

A

Detail Handpiece This small, lightweight handpiece features a 9/16" diameter body so you can hold it like a pencil for your fine detailing. Comes with 1/ " and 3/ " collets 8 32 and collet wrench. 41/2" overall length. Fits most flexible-shaft tools. 147228 . .....................................................$38.99 147230 1/8" collet......................................... $2.99 Carving Handpiece Convert your flexible shaft tool to a reciprocating carver. Includes a 1/4" 90 degree V-chisel, 3/8" #9 gouge, 3/ " straight chisel, 3/ " 8 8 round nose chisel, 5/16" straight chisel, and collet wrench. Fits most flexible shaft carving tools. 51/2" overall length, 1" diameter. 147227 ...................................................... $47.99

Reciprocating Carving Action! AUTOMACH Power Carver

Model HCT 30A. The newest advancement in woodcarving technology! The Handcraft Carver is rugged and reliable. Aluminum die-cast body is light and vibration-free. Special reciprocating action of the cutterhead carves through the toughest woods with just simple hand direction. Greater pressure causes a deeper cut. For safety, free-floating action keeps blades motionless until pressed against wood. The laminated blades move at 10,000 vibrations per minute, leaving a smooth cut surface. Carvers appreciate the versatility in portability and movement, as well as accuracy and speed. Powerful 80-watt ball-bearing motor delivers precise 1mm cutting strokes. Includes 6' grounded cord, rear on/off switch, hanger, five blades, two spanner wrenches, and complete instructions for use. Body measures 228mm (9") long x 44mm (13/4") diameter, 990 grams (2 lbs.) in weight. UL listed. 09G41 ................................................... $299.99

ARBORTECH Power Chisel

High-Torque Carver/Engraver

Ideal for detailing and intricate carving, this powerful high-torque handpiece features variable speed, so you can always be operating at the optimum speed required by your bit or type of stock. Because the motor is built into the handpiece, there is no flexible shaft. The lightweight body and cord allow you to carve longer, more comfortably, and with greater accuracy. At only 61/4" long and 1" diameter, it fits comfortably in the hand and is light enough to be held like a pencil. Variable speed: 3,000 to 13,000 RPM. Includes 1/8" and 3/32" collets. 147235 ...................................................... $67.99

A high-powered reciprocating chisel will save you time and reduce fatigue while working on everything from detailed carvings to rough work. The new Arbortech Power Chisel operates at 12,000 strokes per minute providing smooth action and excellent control to make quick work of labor-intensive operations. The powerful 700-watt motor delivers a low vibration and deep penetrating cut. As a safety precaution, the quick-change chisels are only active when pressed into the workpiece. Kit includes: 20mm flat chisel; 20mm No. 7 gouge; and 25ml of lubricant. The 5-Piece Chisel Pack includes the following gouges: 20mm No. 3; 12mm No. 5; 13mm No. 9; 7mm No. 11; and an 8mm 60° No. 12. The 3-Piece Chisel Pack includes: 7mm No.8; 18mm 90° deep-V; and a 20mm No.9. Blades require honing before use. 142273 power chisel kit......................... $204.99 142274 5-piece chisel pack....................$119.99 143178 3-piece chisel pack...................... $74.99

Helping You Make Wood Work ®

103


Power Carving

ARBORTECH Woodcarvers

Arbortech is a safe and efficient woodcarving blade of hardened steel and tungsten carbide. This tool is ideal for shaping, sculpting, trenching, planing, and trimming.smoothly, whether with or against the grain. The chip limiter, restricts the depth of cut and helps prevents kickback and grabbing. The Pro-Guard affords you the highest level of protection, while allowing a clear view of the blade. The Industrial Pro mounts on 4" or 41/2" angle grinders and fits Makita 9504B and 9526PB grinders without the use of adapters. It also fits Bosch 1346A and 1347A; Makita N9504B and 9527PB; and Metabo AG650S. The Mini Grinder fits Hitachi G12SA, Makita 9524NB, 9521NB, 9520NB, 9523NB; and Ryobi SG100. If your grinder is not listed, call and we’ll check our chart. Adapters are available that allow the wheels to fit most grinder models. Industrial Pro Kit includes a 4" Industrial Woodcarver with three sharpenable carbide teeth, Pro-Guard, and adjustment key. 128258 industrial pro kit........................$159.99 128805 repl. carbide teeth (3)................. $61.50 Complete Mini Grinder - a powerful 600-watt, rightangle drive rotary grinder. Glass reinforced extension arm gives excellent visibility and strength. Includes extra 2" blade and mini sander assortment. 142264 complete mini grinder............. $234.99 128824 2" industrial blade......................$33.99

1/ " 8

Shank Shown

Diamond Carving Burrs

20-Piece Set

8-Piece Set

Because diamonds are 1,500 times harder than the hardest metal they last longer than normal burrs and may be used to cut or shape a wide variety of materials including wood, metal, stone, or glass. Available in 1/8" or 3/32" shank “jumbo tip” sets. Jumbo profiles are great for larger work or for areas where faster material removal is desired. 28-piece set includes 8-piece jumbo set and similar shank 20-piece set illustrated above. 124326 8-pc. 3/32" shank jumbo tip........... $15.99 18G21 20-pc. 3/32" shank............................ $9.99 124327 complete 28-pc. 3/32" shank set...$24.99 124328 8-pc. 1/8" shank jumbo tip............ $14.99 18G27 20-pc. 1/8" shank............................. $9.99 124329 complete 28-pc. 1/8" shank set....$24.99 Industrial Grade Sets. 18G26 25-pc. 3/32" shank......................... $19.99 18G28 30-pc. 1/8" shank...........................$24.99

Power Carving Kit

A high-quality variable-speed motor tool is the centerpiece of this kit that features rotary and reciprocating action, and handheld or flex-shaft carving! The unit features ball-bearing construction, 1/8" collet with shaft lock for easy bit changes, folding bail for hanging the unit, and separate on/off switch and variable speed controls. When used in the hanging mode you can attach either the reciprocating or three-jaw chuck rotary handpieces to the 38" super-flexible shaft. Furnished with a five-piece ruby detailing burr set, two diamond burrs, two straight chisels (3/16" and 3/8"), 3/8" curved chisel, 1/4" V-chisel, and a 3/8" gouge. Complete kit includes handpiece wrench, shaft adapter nut, and form-fitted case. Accepts FLEXCUTTM power carver blades without adapter. 141885 ....................................................$134.99

FLEXCUTTM Power-Carver Blades

PROXXON Handheld Belt Sander

Ideal for use in limited space, this sturdily built 115V belt sander works on flat surfaces, corners, and radii. The sanding head tilts through 60°, which eases access in many difficult spots. Belt speeds range from 300 fpm to 700 fpm (feet per minute). The platen is 3/8" wide and 45/8" long, while the overall sanding arm is 61/2" long. Belt replacement requires a push against the platen and bar, slip it off, slip the new one on. Track if needed and you’re ready to go again. The vacuum dust attachment fits wands or hoses up to about 13/8". Motor draws about 100 watts. 822518 ....................................................$154.99 822520 80 grit belts (5)............................... $5.99 146893 120 grit belts (5)............................. $5.99 822519 180 grit belts (5)............................. $5.99

120-Piece Diamond Burr Set

Hobbyist and seasoned pro alike will find themselves creating unbelievable detail with these diamond-tip burrs and a rotary power carver. Favorites of jewelers and metalworkers, diamond burrs are being discovered by woodworkers and woodcarvers. These bits offer fast but controlled cutting action. This 120 pc set offers 30 profiles in four grits, 150, 240, 400, and 600, so you can progress from rapid cutting to final finishing cuts with the same profile! 149386 ......................................................$29.99

Power Carving Dust Collector

The two individually controlled fans of this compact, portable unit, draw up to 500 cubic feet of air per minute using computer-grade, maintenance-free motors. This self-contained unit even has dual 115V outlets to power your sanders or power carver. Includes a Plexiglas shield that attaches to the dust collector for increased efficiency. 8" x 101/2" x 21". 140605 .................................................. $209.99 09G18 dustless repl. air filter...................... $9.99

104

Double-Cut Solid Carbide Burr Sets

The fine diamond-like tooth pattern of these carbide burrs cuts very aggressively, yet leaves a surface finish much finer than coarse cutting burrs. Solid carbide heads are brazed to steel shanks. 30,000 RPM maximum. Set of the 8 in a fitted case. 145074 1/4" shank 8-pc. set......................$49.99 145075 1/8" shank 8-pc. set......................$49.99

Credit Card Orders: 800 225-1153

Flexcut has developed a new line of quality blades for reciprocating power carvers in the sizes and profiles you need most. The same low-resistance cutting edge that Flexcut is known for now allows your Ryobi, Proxxon, Automach or Wecheer carver to work less and carve more. Automach machines require brass adapters, available separately. 129740 1/8" No. 11 gouge *..................... $14.99 129744 1/4" x 70° V-parting *................. $12.99 129738 3/8" No. 3 gouge *........................$13.50 129739 5/16" No. 5 gouge..........................$13.99 129745 3/8" x 70° V-parting ++................. $14.99 129743 3/8" No. 8 gouge * ++. ................. $14.99 140386 1/2" No. 28 spoon gouge............ $14.99 145839 11/16" 90° V-parting....................$14.99 129741 5/8" No. 3 gouge ++...................... $13.99 129742 9/16" No. 5 gouge......................... $13.99 128305 1/2" No. 8 gouge...........................$14.99 128303 3/4" No. 3 gouge...........................$15.99 128304 5/8" No. 5 gouge ++.......................$15.99 128300 1" No. 3 gouge..............................$15.99 128301 7/8" No. 5 gouge............................$15.99 128302 1" chisel........................................$15.99 145851 automach adapters (20)...............$2.99 145549 19-pocket blade tool roll.............$13.99 815644 quick-connect palm handle .......$13.99 819363 palm handle adapter..................$20.99 Detail Gouge Set (*)contains an 1/8" No. 11, 1/4" 70° V-parting tool, 3/8" No. 3 and a 3/8" No. 8 gouge. 128297 set of 4 Save Over $16! .............$38.95 Roughing Gouge Set(++) contains a 3/8" 70° V-parting tool, 3/8" No. 8, 5/8" No.3, and a 5/8" No. 5 gouge. 128298 set of 4 Save Over $18! .............$39.99 Deluxe Gouge Set contains 14 of the tools listed above (does not include the 1/2" No. 28 spoon gouge or the 1" chisel). 128299 complete set Save Over $56! .$149.50

Free Technical Advice: 800 535-4486

www.woodcraft.com


Power Carving

Tungsten Carbide Burrs

These revolutionary-styled, patented SSG-structured carbide burrs feature a fast, free-cutting action that works equally well cutting with or against the grain, and even on knots. Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. The needle-sharp points of tungsten carbide can be “dressed”, just like a grinding wheel, to give an even smoother surface finish. We offer three grits - Gold, which is more of a medium grit burr leaving a surface finish that requires moderate sanding; Silver, which is coarse and fast cutting; Red, whose random spaced carbide has the fastest cutting action with minimum clogging, but leaves a surface that requires further work with finer burrs. These burrs will also cut fiberglass, plastics, rubber, soft stone, or composite materials. Overall lengths from 11/2" to 3", maximum RPM 28-30,000. Sets of four of our most popular styles. Red X Coarse

Silver Coarse

Gold Fine

Set Includes

Each

140495 18N20 18N50 A, D, E, H.......... $67.99 N/A 18N30 18N60 I, L, N, O...........$48.99 All burrs are available individually. Red X Coarse

140144 140145 140146 140147 140148 140149 N/A

Silver Coarse

18N1A 18N1B 18N1C 18N1D 18N1E 18N1F N/A

Gold Fine

Shank Dia. Style

Each

18N4A . ... 1/4"........A.......$16.99 18N4B . ... 1/4"........B.......$15.99 18N4C . ... 1/4"........C.......$15.99 18N4D .... 1/4"........D...... $21.50 18N4E ..... 1/4"........ E...... $21.50 18N4F ..... 1/4"........ F...... $21.50 N/A . ...... 1/4"........G

B A

C DETAIL MASTER Burning Systems

The Professional’s Choice For Versatility, Dependability & Power Each model features solid state circuitry; variable head regulator dial; on/off switch; “on” indicator light; enameled steel body with stainless steel cover; easy-loading sockets for handpiece plugs; side handpiece holding scabbards, and a 5' power cord. Maximum temperatures of 2000°. Heat recovery time varies from model to model and is dependent on wattage. Pens not included, requires fixed-tip or replaceable-tip handpieces listed below. (A) Detail Master “Dagger III” delivers 50 watts of power and is ideal for all general feather and decorative burning. 125465 ................................................... $116.99 (B) Detail Master “Sabre IV” delivers 100 watts of power to meet the needs of serious carvers. 125466 ...................................................$160.99 (C) Detail Master “Excalibre” features two outlets so you can use your favorite pair of handpieces. Selector switch regulates power to only one handpiece at a time for safety. Powerful 130-watt transformer can deliver tip heat from 0-2000° in seven seconds with rapid heat recovery. 125467 . ................ $204.99

A

F

J

B G

C

Red X Coarse

140151 140152 N/A N/A N/A N/A N/A

P

K Q

L

D

E

O

I

H 1/ " 4 Shank Shown 50% of Actual Size

Silver Coarse

18N1H 18N1T 18N1I 18N1J 18N1K 18N1L 18N1M

Gold Fine

Shank Dia. Style

T

Each

(D) “Etch Master” Pyrographic System. An excellent starter unit for carvers or decorative craft burners. 35 watts of power for most woods, leather, and plastics. Due to limited power, do not use with large or xD long pens. Features on/off switch, dial heat regulator, and 6' cord. 125468.............. $129.99 Carrying Cases. These convenient boxes have room for the control unit, extra pens and accessories. 125469 Dagger units.................................$36.99 125470 Excalibre and Sabre units...........$36.99 Fixed-Tip Handpieces, unlike replaceable-tip G handpieces, do not lose efficiency due to oxidation build-up in the removeable conF nectors, and there is no need to wait for a “cool down” to change E tip styles. See below for stock number. Fixed-Tip Handpieces (E)...................... ea. $32.99 Replaceable-Tip Handpieces offer a less expensive way to have several tip styles. While more economical, they require slightly more care and maintenance, and can result in “lost time” when changing tips. This new model handpiece is an improvement

S

1/ " 8 Shank Shown Actual Size

N

18N4H . ... 1/4"........H....... $21.99 18N4T ..... 1/4"........ T....... $15.99 18N4I ...... 1/8".........I....... $12.99 18N4J . .... 1/8"........ J....... $12.99 18N4K . ... 1/8"........K....... $12.99 18N4L ..... 1/8"........ L....... $15.99 18N4M .... 1/8"....... M...... $15.99

Detail Master Handpieces

R

M

Red X Coarse

Silver Coarse

N/A N/A N/A N/A N/A N/A N/A

18N1N 18N1O 18N1P 18N1Q 18N1R 18N1S 18N1V

Gold Fine

V Shank Dia. Style

Each

18N4N .... 1/8"........N....... $14.99 18N4O . ... 1/8"........O....... $14.99 18N4P . ... 1/8"........P....... $15.99 18N4Q . ... 1/8"........Q....... $16.99 18N4R . ... 1/8"........R....... $16.99 18N4S ..... 1/8"........S....... $16.99 18N4V ..... 1/8"........ V....... $16.99

over the old "sliplock" style in that it runs much cooler and the solid, silver brazed tips make better contact electrically in the handpiece. Old and new style tips are not interchangable in their respective handpieces. Complete with cord and jackplug to fit all Detail Master units. Stock numbers for tips (sold separately) are listed below. 146540 (F) repl. tip handpiece................ $29.99 Foam Handpiece Protectors provide extra air cooling of pens when burning at high temperatures. 4" long, plastic foam. 128103 (G) 4 pack....................................$10.99 Handpiece Gripper Rings fit in forward handpiece grooves for more finger tip turning control. Bag of 14 for two pens. 06K82. bag of 14..........................................$6.50 Handpiece Care Kit keeps your pens in top condition. Includes a 37/8" x 1" x 3/8" hard Arkansas stone, 37/8" x 13/4" leather strop and 1 oz. bottle of lapping compound for shaping, polishing and cleaning tips. Plastic travel case included. 06K71. . ......................................................$47.99

Calligrapher’s Burning Pen 6B

The square-shaped tip is only 5/32" wide, like the fine nib of pens - except you write with heat, not ink. 18K6B fixed-tip handpiece......................$33.99 18K6BR replaceable tip only....................$10.99

Not to scale

Handpieces And Replaceable Tips (E) Handpiece $32.99 ea. 18K1A 18K1B 18K1C 18K2A 18K2B 18K2D 18K3A 18K4A 18K4C 18K5A 18K6A 18K7A 18K7B 18K10A Replac. Tips $8.99 ea. 146541A 146541B 146541C 146542A 146542B 146542D 146543A 146544A 146544C 146545A 146546A 146547A 146547B 146540A

Helping You Make Wood Work ®

105


Files & Rasps G

A

B

Complete Woodburning Kits

Decorative Branding Kit. Kit includes nine interchangeable tips that give you unlimited design flexibility. The 30-watt branding tool can be used to decorate wood items, picture frames, leather articles and accessories, furniture, cabinets, and decorative plates. The possibilities are endless. 127292.......................................................... $37.50 Temperature Regulator. Use your single-wattage woodburning pen, soldering iron, stencil pen, or branding iron like a variable-wattage unit (500 watt maximum). 140231 . .......................................................$39.99 10-In-1 Tool Kit. This versatile tool includes all of the tips and points needed for woodburning, soldering, leather craft, stencil and Styrofoam cutting. Includes a 30-watt professional iron with 6' cord, 7 woodburning tips, 2 cutting and fusing tips, 1 soldering tip and a tool stand, all packed in a plastic case. Tool color may vary from that shown above. 127290 .......................................................$36.99

G

C D

E F Cabinetmaker’s Files & Rasps

Length

Size

Handle

(A) Cabinet Rasps. Used by cabinetmakers for fast, accurate wood removal. Curved on one side, flat on the other, single cut on the edges. The shorter the rasp, the smaller the rasp teeth, the finer the cut. 2nd cut. Handle (G) sold separately.

06B06 10"............1" x 9/32.......... M............ $24.99 (D) Cabinet Files. Finer than regular wood files, they give a smooth, clean cut. They are half round in section and slightly thinner than our regular wood files (06B06). Handle (G) sold separately.

06B31 8"........... 29/32" x 1/4".........S............. $29.99 06B32 10"......... 11/8" x 9/32"....... M............ $32.99 (B) Nicholson Cabinetmaker’s Rasps cut evenly and smoothly. Edges are cut to allow filing narrow grooves. All are curved on one side, flat on the other. “2nd cut” is slightly coarser and faster cutting than “smooth”. 10" x 7/8". These are the smoothest cutting rasps you'll ever use. USA. Handle (G) sold separately.

06B23 10"........... 5/16" x 7/32"........M.............$34.99 (E) Round Rasp. A bastard cut rasp for quick removal of stock from circular openings and for forming concave surfaces. Handle (G) sold separately.

06B01 2nd cut (#49)..................M . .........$44.99 06B02 smooth cut (#50)............M............ $59.99 (C) Wood File. Half-round wood files are made like metal files, but have coarser teeth for use on wood. While a rasp cuts the wood with individual small teeth, this file smoothes it with a shearing action. Handle (G) sold separately.

06B04 10"............. 3/8" dia............ S..............$17.99 (G) Screw-On File Handles are easier on the hand than plain file tangs and give you added control. Finished hardwood handles with heavy steel ferrules, 41/2" to 5" long. S = small, M = medium.

Length

Size

Cut

Handle

Handle

Length

Length

Size

Size

Handle

Handle

06B03 10".............. 3/8" dia........... S.............$32.99 (F) Round File. For smoothing after preliminary shaping with a round rasp. Handle (G) sold separately.

Length

Size

Size

Thread Size

Handle

File Length

06B54 S................. 5/16"-24............ 8".............$7.99 06B55 M................. 3/8"-24............ 10"............$7.99

Specialty Rasps

8-Piece Riffler Rasp Set

The coarse-cut teeth of these double-ended rifflers will eat through the toughest woods in no time, and the selection of 8 different shapes provides you with the right tool for every shaping job. Handmade in China by a small, specialized firm, these rasps are worked from quality steel to give you a set that will keenly perform for years and years. Rasps are 8" long with faces 1/2" to 5/8" wide. A tremendous value. 140045 ...................................................... $22.99

(A) 4-in-1 Hand Rasp combines a fine and medium wood rasp and file in one tool! 8" long, curved on one side, flat on the other. 145481 . ............$10.99 (B) Sculptor’s Rasp. A versatile file-rasp combination; one end fine for finishing, the other coarse for shaping. Four working sides, 2 half-rounds, 2 flat. B 9" long with 3" working C A surfaces. 06A04 . .............$39.99 (C) Keyway Rasp is two tools in one! Half is a 5/16" round rasp, the other a 1/2" flat rasp. Very useful for shaping holes or surfaces in doors, furniture, sculpture, etc. Length 83/4", coarse #2 cut. 17J61 . ........................................................ $19.99

Precision Needle Files

Made of high-quality chrome-alloy steel with deep, carefully milled gullets for rapid and clean cutting (No. 2 cut). Leaves a smooth finish on wood, metal and plastic. Twelve-piece set, 140mm (51/2") length. 16H10   set of 12..........................................$34.99

106

Needle Rasp Set

Microplane� Interchangeable Blade Files

The razor-sharp edges of the stainless steel blades yield aggressive, yet smooth cuts on even the hardest woods and are acid-etched for long life and will never corrode. Once used, you'll wonder how you ever worked without a Microplane blade! The Starter Set features a high-strength poly-molded blade holder with integral comfort grip handle and provisions for the interchangeable 8" x 11/8" blades. Included in the Starter Set is a coarse cut flat blade. Additional blades, in flat, round and angle profiles, are available in coarse and fine cut. 828809 starter set.....................................$19.99 828812 flat blade, fine cut........................ $11.99 828810 round blade, coarse cut...............$10.99 828813 round blade, fine cut....................$10.99 828811 angle blade, coarse cut...............$10.99 828814 angle blade, fine cut.....................$10.99 828815 3" handle w/insert....................... $11.99

These small, quick-cutting rasps are highly valued for adding fine detail and intricate shaping. 61/4" long rasps comes in six different styles and includes a 33/4" wooden handle. 01X30 set of 6............................................ $39.99 02T11 extra handle...................................... $6.99

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Files & Rasps

Our Finest Italian Hand-Cut Rifflers

Carver’s Rasp

For sculptors and woodc a r v e r s , t h e s e 7 1 /2 " rifflers are indispensable. Manufactured of the finest materials under the strictest quality control standards, these sets are a favorite of carvers world wide. There are eight different shapes to a set, both ends have the same shape, and cut. We offer either hand-cut rasp or file cuts. Rasps are toothed around whole end, files have one smooth side each end.

A B

C

D

E

(A) (B) (C) (D)

File Cut

F G

Rasp Cut

H

I

J

A

File Cut

B

File Cut Profiles

17J40 files set of 8 (A-H) Save Over $22! .$149.99 17J55 rasps set of 8 Save Over $22! ......$149.99 17J30 set of 16 Save Over $79! .............. $264.99 Also available individually. Style

Why struggle to shape curved or concave surfaces with a straight tool when this rasp can help so much? The unique design works effectively in tight, curved areas, smoothing and shaping wood with a minimum of effort. Originally used by staircase makers to smooth curved handrails, carvers and sculptors find them especially valuable for shaping their work. 1" x 41/4" x 21/2". 145458.......................................................... $10.99

Rasp Cut

ea. $21.50 ea. $21.50 flat taper......................17J41 ..................17J51 flat................................17J42 . ................17J52 oval..............................17J43 . ................17J53 triangle........................17J44 . ................17J54

Woodworker’s File Set

This is a superb value for beginners and professionals. We’ve selected five top-quality rasps and files then added three useful accessories: an interchangeable handle to protect hands, our heavy canvas file roll for convenient storage, and a double-sided file card and brush to prevent wood chips and fibers from clogging the file teeth. The 10" thin profile-style rasps work well in tight areas, and have cut edges for filing grooves. The 10" wood file smooths stock with a gentle shearing action. 13E30 8-pc. set Save $30! .................... $104.99 16T40 set of 5 files Save over $12!..........$69.99

C

Rasp Cut Profiles (E) (F) (G) (H) (I) (J)

Style

File Cut

Rasp Cut

square.................... 17J45 ................. 17J56 round...................... 17J46 ..................17J57 half round.............. 17J48 ................. 17J59 knife....................... 17J47 ................. 17J58 flat straight............ 17J49 ..................... N/A half rnd str............. 17J50 ..................... N/A

Also available individually. 16S41 1/2-round bastard rasp.................. $16.50 16S42 1/2-round 2nd cut rasp.................. $17.50 16V61 1/2-round smooth rasp.................. $18.99 16S33 1/2-round bastard file.................... $17.50 16S34 round bastard file........................ $11.99

Iwasaki files cut with surprising speed and yet leave a smooth surface due to the manner in which the teeth are milled and chemically etched. Combine that with the diagonal groove pattern and the result is a file that will cut like a plane, but with very little resistance and with the built in chip-breakers to help prevent clogging. All of the files are safe edged, allowing you to use them to adjust mortise and tenon joints like a float or to fine tune the body of a wood plane without digging into the adjacent surfaces. Suitable for all types woods or plastics, their aggressive action provides short detail strokes without compromising speed. Whether you are working on a carving, or turning a pen with the choice of a medium, fine and extra fine tooth configuration Iwasaki Carving Files offer the right file for your task at hand. 150554 (B) 150mm flat medium cut.........$17.99 150555 150mm half-round medium cut .$17.99 150556 200mm flat medium cut............. $27.99 150557 (C) 200mm half-round med. cut .$27.99 150558 150mm flat fine cut..................... $31.99 150559 150mm half-round fine cut......... $31.99 150560 150mm flat extreme-fine cut....... $31.99 150561 150mm half-round ext.-fine cut . $31.99 150562 200mm flat fine cut.....................$34.99 150563 200mm half-round fine cut.........$34.99 150564 200mm flat extreme-fine cut...... $37.99 150565 200mm half-round ext.-fine cut . $37.99 150566 (A) 110mm flat extreme-fine cut .$29.99 150567 110mm half-round ext.-fine cut... $27.99

06D01 file card and brush........................$16.50 144947 universal file handle.................... $13.69 09K32 6 pocket file roll............................$24.99

WoodRiver� Deluxe Scraper Set

Belt rotates to provide fresh sanding surface.

Sanding Stick Kits

Newly designed pencil-type sticks are hexagon shaped for comfort, feature thumb and finger supports, and hold 1/4" x 123/4" aluminum oxide belts. The 61/4" x 1/4" sticks are made of impact-resistant plastic and have a spring-tensioned back to keep the sanding belts firmly in place or allow quick belt rotating or changing. The tapered end can be used intricate sanding while the flat side and rounded end add to the versatility of the sanding sticks. 24-Pc. Standard Kit includes 4 color-coded sticks and 5 belts each in 80, 120, 180, and 240 grits. 123283 standard kit...................................$22.99

IWASAKI Japanese Carving Files

24-Pc. Finishing Kit includes 4 color-coded sticks and 5 belts each in 240, 320, 400, and 600 grits. 123284 finishing kit....................................$22.99 141852 repl belts 120 grit (5)......................$3.99 141853 repl belts 180 grit (5)......................$3.99 141854 repl belts 240 grit (5)......................$3.99

This scraper features a comfortable 53/4" hardwood handle and 11/2" forward knob for fine pressure control. Unlike other scrapers, where blades are attached with a screw, the blades of this scraper are securely clamped to the cast-iron head by the machined, front handle bolt. To change blades you simply loosen the front handle, release the blade, install another blade and retighten the handle. Furnished with five blades, one straight, three concaved and one convex in a wooden case with blade storage slots so your blades won’t get misplaced or damaged. For custom work, the blades can be easily filed or ground to match the profile of those “impossible” to scrape contours. 148723 . .....................................................$32.99

Helping You Make Wood Work ®

107


Scraping & Sanding C

A

B

B Ol Bastard Jig Sharp Scraper

A multi-purpose scraper that can handle any job. The scraper and sharpening jig are made from a high density molded plastic with a steel blade. The sharpening system takes the hassle out of sharpening by providing a nylon bushing which sets the blade at the perfect angle on the bastard file, resulting in a perfect edge every time. 151069 scraper-jig combo... $49.99 151070 3-pack, blades.......... $5.49

BAHCO Swedish Cabinet Scrapers

The toughness and reliability of this quality steel has been an immediate hit with woodworkers. It shapes to a keen burnished edge, and stays sharp while working the hardest stock. Available in two lengths and thicknesses. Each is 21/2" wide. Sharpening instructions included. Length Thick

Each

(A) LYNX Cabinet Scraper Set will leave a smooth surface without the tedium and expense of sandpaper. Available in four different styles for flat, concave, and convex shapes of varying radii. The straight is 21/2" x 5", the convex/ concave is 2" x 6", the gooseneck is 27/8" x 45/8" and the double-curved is 23/4" x 51/2". Our scrapers are made of properly tempered .80mm highquality steel. 147419 set of 4.................... $15.99 Burnishers are required tools for cabinet scraper users. After scrapers have been squared with a mill file and fine sharpening stone, these hardened steel bladed tools turn over the thin cutting edge that make scrap-

A B pfeil® PFEIL Swiss Made Burnishers

From the makers of pfeil Swiss made tools. These hardened burnishers are manufactured from the highest grade steel, hardened to exacting

ers operate so effectively. We offer three basic styles, each operating in the same manner but with different blade shapes. (B) WOODCRAFT Burnisher. Made exclusively for us, by Pfeil “Swiss Made” Tools, of the best tool steel. Hardened blade is highly polished to reduce friction when rolling over edges. Round blade is 3/8" dia., 6" long, and requires only occasional buffing to maintain its polish. Lacquered beechwood handle. 05S02. .......................................$32.99 (C) CROWN Round Scraper Burnisher. Features a polished HSS rod fitted with a comfortable rosewood handle. 71/4" blade, 123/4" overall. 142576 ................................$21.99 specifications and polished to a mirror finish polished to reduce friction when rolling a hook. The flattened edge of triangular version is preferred for traditional rectangular card scrapers while the oval version allows for the sharpening of radius scrapers. Blade is approximately 3/8" by 61/4". Overall length is 103/4". Natural oil finished cherry handle. 05B52 (A) oval burnisher .$26.50 05B53 (B) triangular burnisher . .... . ............................... $25.99

3+ 

02Z08 6".....80mm....$9.99... $8.99 02Z09 5".....60mm....$9.99... $8.99 02Z10 set of 2......... $17.99 .$16.19

Non-Woven Abrasive Pads

These flexible, nonwoven pads are ideal replacements for steel wool. Applications range from heavy-duty cleaning to stripping, surface finishing and light-duty polishing. The pads are washable and reusable, can be cut and folded, used with or without chemicals, and they won’t rust, shred, or splinter. Pads are 6" x 9", available in bulk packs and an assortment. The “Grip-On” Hand Pad Holder keeps your hands away from chemicals when working with paint strippers. 146745 green #0 (20).......... $25.50 146746 maroon #00 (20).... $23.59 146747 gray #000 (20)........ $23.59 146748 white #0000 (10)... $10.99 146750 hand pad holder ................. (not shown)............. $10.99

108

A Scrapers & Burnishers

WOODSMITH Scraper Sharpening System

along the fixed burnishing pin gives you an even, clean cutting burr. System includes This clever system takes a Nicholson mill file, a all the guesswork out of 3" x 6" stainless steel sharpening and burnishcabinet scraper, and ing cabinet scrapers. easy-to-follow instrucThe anodized extruded tions that walk you aluminum fixture sethrough the sharpencurely holds a mill file and ing process. Fixture allows you to quickly and 1 precisely shape the edge of scrapers mounts to piece of 1 /2" thick stock at either 45° for scraper planes, like and can be clamped in your bench the Stanley #80, or 90° for handheld vise to provide a stable working area. scraper blades. Working the scraper 141025 .................................. $59.99

43/­­8" X 51/­­2" Synthetic Steel Wool Pads

Flexible, non-woven pads are ideal replacements for steel wool for heavy duty cleaning and stripping through finishing to light duty polishing. 146353 0.............................................................$2.99 146354 000........................................................$2.99 146355 0000......................................................$2.99

LYNX Concave & Convex Scraper Sets

Our scrapers are made of high quality, tempered, .80mm steel and are ready for a burnishing right out of the package. The Concave Set (A) contains 2 scrapers shaped specifically to scrape curved areas such as spindles and chair legs. Scraper 1: 1/4", 3/8", 1/2", 5/ ", 3/ ". Scraper 2: 7/ ", 1", 11/ ", 8 4 8 8 11/4", 11/2". The Convex Set (B) also contains 2 scrapers specifically shaped to scrape in recesses. Scraper 1: 1/4", 3/8", 1/2", 5/ ", 3/ ". Scraper 2: 7/ ", 1", 11/ ", 8 4 8 8 11/4", 11/2". 150104 (A) concave set...... $11.50 150105 (B) convex set........ $11.50

LYNX Straight Scraper Set

For heavier stock removal, cleaning up glue lines, and for removing paint, use this set of 3 stiff, high-grade steel scrapers. Each is 0.8 mm thick, slightly thicker than traditional scrapers, sized 6" x 3", 5" x 21/2" and 4" x 2". They’re ready for a burnishing right out of the package - no need for initial preparation because they come milled to a sharp 90°. 147420...................................$16.50

Shavehooks Scrape Uneven Surfaces

These beautifully made scrapers are designed for flat, convex, and concave surfaces as well as for tight corners which cabinet scrapers cannot handle -ideal for scraping paint too! The tempered steel blades, heavy shanks, and polished beechwood handles make these valuable additions to any woodworker’s bench. Length - 83/4". UK. Honing required before use. 09D40 set of 4 Save $6!.... $33.95 09D11 round & point............. $9.99 09D41 rectangle.................... $9.99 09D31 combination............... $9.99 09D21 triangle....................... $9.99

Abrasive Cords

Perfect for woodturning, restoration, and general sanding of any hard-to-reach or delicate work. Aluminum oxide abrasive on cloth core cords are also excellent for deburring and polishing metal. Available on 50-foot metal spools. 02W32 .055" dia..............120 grit.................... $13.99 02W33 .055" dia..............150 grit.................... $13.99 02W34 .030" dia..............200 grit................... $13.99

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Scraping & Sanding

A GUINEVERE Sanding System

Create a smooth and velvety finish on wood as well as metals, plastic, bone and horn with the Guinevere Sanding System. This system of inflatable sanders adapts to the shape of your work, from concave to convex, angled or flat. The cloth sanding sleeves are long-lasting and easy to switch out. Guinevere Sanding Kit is ideal for difficult profiles. Its dome sander is designed for round, curved, bulging or cup-formed shapes while the drum sander is used on flat or convex surfaces. Kit includes (1) inflatable dome sander (23/8" x 19/16"), (4) dome sanding sleeves (coarse to extra-fine grit), (1) inflatable drum sander (21/2" x 13/4"), (4) drum sanding sleeves (coarse to extra-fine grit), double-acting micro hand pump, and sandpaper cleaning stick. Sanders have a 1/4" shank and fit the Guinevere motor, flex shafts, and drills. Drums and sleeves are also available individually. Guinevere Flexible Shaft with Chuck. With a maximum reach of 51", this vibration-free flexible shaft, connected to the easily mov- B able Sanding and Polishing Motor or other rotary power source, will allow you tremendous flexibility and maneuverability in most work positions.

Intended for low-speed use (3,000 to 10,000RPM), this quality Swedish flex shaft has 2 encapsulated ball bearings in the handpiece and one in the drive end for continuous work and is extremely flexible due to the double spiral steel cord in the protective tube. Guinevere Sanding and Polishing Motor. This small and portable, extremely quiet but powerful motor is the perfect power source to use C with the Guinevere flexible shaft and inflatable sanders. Fitted with two 3/8" chucks, this motor allows you to mount the flex shaft with a sander to one end with the other sander fitted to the remaining chuck. UL listed. Specifications: 115 Volt, 60 HZ, 1/2 HP (300 Watt), 3.0 Amp, 3,600 RPM, 6" height, 12" length, 9.5 lbs. Guinevere Hand Pump allows you to feel the softness of the bulb while you are pumping, giving you the ideal drum softness for the grit being used. The best pressure is as soft as possible while still keeping the sleeve from moving on the drum. 147549 147550 147548 147547 147535 147537 147538 147539 147540 147536 147541 147543 147544 147545 147546 147542

(A) sanding kit.......................... $116.99 (B) flexible shaft with chuck .... $84.99 (C) sanding /polishing motor .$139.99 hand pump.................................... $9.99 inflatable dome sander..............$39.99 dome sleeves, 60 grit (3).............$8.99 dome sleeves, 120 grit (3)...........$8.99 dome sleeves, 180 grit (3)...........$8.99 dome sleeves, 320 grit (3)........ $11.99 dome asst. pack (1 each grit)...... $9.99 inflatable drum sander..............$39.99 drum sleeves, 80 grit (4)..............$8.99 drum sleeves, 150 grit (4)...........$8.99 drum sleeves, 220 grit (4)...........$8.99 drum sleeves, 320 grit (4)...........$8.99 drum asst. pack (1 each grit)...... $9.99

5" Discs (10)

A C B ABRANET Sanding Discs And Pads

Abranet® is a revolutionary new sanding material for dust-free sanding. This unique patented material contains thousands of small holes, making it possible to effectively vacuum away dust and other particles without clogging the disc surface. The result is seen in a very uniform sanding pattern and perfectly smooth surface. Since the amount of airborne dust has been minimized, the work environment is remarkably improved. This durable, long-lasting, multifunctional material is used both within the automotive and wood industries as well as on composite materials. 5" Discs (10)

147491.... $19.99 147492..... $17.99 147493..... $17.99 147494..... $17.99 147495..... $17.99 147496..... $17.99

6" Discs (10)

80 grit 100 grit 120 grit 150 grit 180 grit 220 grit

147501... $21.99 147502....$19.99 147503....$19.99 147504....$19.99 147505....$19.99 147506....$19.99

6" Discs (10)

147497...... $17.99 320 grit 147507....$19.99 147498..... $17.99 400 grit 147508....$19.99 147499..... $17.99 600 grit 147509....$19.99 Job Packs include one of each grit and one pad protector. 147500 5" job pack..................................$22.99 147510 6" job pack..................................$24.99 (A) Backing Pads are designed for maximum dust extraction on random-orbital sanders when used with Abranet discs. 147511 5" Black & Decker, DeWalt....... $36.99 147512 5" Porter Cable.......................... $36.99 147515 5" soft-faced pad........................$40.99 147513 6" Festool....................................$40.99 147514 6" Fein.........................................$40.99 (B) Pad Protectors protect the backing pad of your sander from wear and tear when sanding aggressively and continuously with Abranet. These cost-effective pad protection discs, positioned between the backing pad and the sanding disc, should be changed regularly. 147518 5" pad protector (2).................... $17.50 147519 6" pad protector (2)....................$20.99 (C) Interface Pads are used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. The interface pad is placed between the base plate of the sander and the sanding disc. 147516 5" interface pad..........................$14.99 147517 6" interface pad..........................$15.99

NEW WAVE Hook & Loop Sanding Discs

The new wavyedge design of these discs overhangs the holder and arches around the edge to help prevent “dig-ins” caused by the edge of the disc contacting the surface of the wood. Made of Hi-Per Gold sandpaper which uses special lubricants on the surface of the discs to reduce loading and resin clogging, and incorporates an extremely flexible backing which smoothly conforms to curves. New Wave Bowl Sanding Kit. Contains one hook & loop style sanding pad (1/4" shank), one hard and one soft interface pad, and 5 each 60, 120, 220, and 320 grit sanding pads. 142960 2" bowl sanding kit..................... $51.99 142961 3" bowl sanding kit...................... $57.99 Sanding Discs in bags of 25. 2" Discs

Grit

3" Discs

141430 .......$9.50 60 grit 141440 .....$10.50 141431 .......$8.50 80 grit 141441 ....... $9.99 141432 .......$8.50 100 grit 141442 ....... $9.99 141433 .......$8.50 120 grit 141443 ....... $9.99 141434 .......$8.50 150 grit 141444 ....... $9.99 141435 .......$8.50 180 grit 141445 ....... $9.99 141436 .......$8.50 220 grit 141446 ....... $9.99 141437 .......$8.50 320 grit 141447 ....... $9.99 141451 .......$8.50 400 grit 141448 ....... $9.99 141438 .......$8.50 600 grit 141449 ....... $9.99 141439 .......$8.50 800 grit 141450 ....... $9.99 Interface Backing Pads are used between any standard hook & loop style foam holder and the New Wave sanding discs. Available in soft and hard, soft for finer sanding and better conformation to curves, hard for heavy sanding or sanding up to beads and corners to prevent losing their sharp definition. 149225 2" very soft pad..............................$4.99 141390 2" soft pad......................................$4.99 141391 2" medium pad...............................$4.99 141393 3" soft pad......................................$6.99 149224 3" very soft pad..............................$6.99 141392 3" medium pad...............................$6.99 SORBY Hook & Loop Style Sanding Pads. Use with the Interface Backing Pads and New Wave Sanding Discs. 17K70 2" foam sanding pad................... $32.99 17K71 3" foam sanding pad....................$40.99

Abrasive Belt Cleaner

Increases belt and disc life 2 to 4 times. Hold the stick firmly against a moving abrasive belt or disc until all loaded particles are removed-usually a matter of seconds. Available in two sizes. 04W11 11/2" x 11/2" x 81/2"...........................$8.99 04S61 2" x 2" x 12"................................... $11.99

Helping You Make Wood Work ®

109


Scraping & Sanding Sanding Belts

NORTON - Professional-Quality Belts, Discs, And Sheets

Tired of buying cheap sandpaper that clogs or doesn’t last? If so, now you can afford to step up to Norton professional-quality abrasives.

5" Universal Vac Hole 3X Sanding Discs

All discs feature patented, ceramic alumina abrasive and a unique, fiberreinforced backing. The 3X high-performance discs fit 5 and 8 hole sanders, last 3 times longer than conventional aluminum-oxide discs, are edge tearesistant, and provide a consistent finish. 3 pack

320 grit 220 grit 180 grit 150 grit 120 grit 100 grit 80 grit 60 grit

146308.....$6.50 146309.....$6.50 146310.....$6.50 146311.....$6.50 146312.....$6.50 146313.....$6.50 146314.....$6.50 NA

10 pack

50 pack

146300....... $11.99 829387....... $11.99 829386....... $11.99 829385....... $11.99 829384....... $11.99 829383....... $11.99 829382....... $11.99 829381....... $11.99

829709...... $39.99 829708...... $39.99 829707...... $39.99 146319...... $39.99 829706...... $39.99 829705...... $39.99 146322...... $39.99 146323...... $39.99

Micro-Mesh has been used for years to restore airline windows to optical clarity. Only recently have wood turners discovered these incredibly fine abrasives and used them wet or dry to create a polished sheen on bare wood or beautiful luster on finish coatings. Micro Mesh sanding products are ideal for use on bowls, small turnings, or pens. The MicroMesh Hook & Loop Disk Assortment Pack can be paired with the Sorby Sandmaster (819989) or the Sorby Micro Sandmaster (149670) for the ultimate finish for turnings and is available in three sizes. Micro–Mesh Soft Touch Pads are foam backed 3" x 4" two sided pads. Micro-Mesh Sanding Sticks are two sided pads that are smaller in size, like a nail file, for those hard to reach areas. All kits include one each of 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12,000 grits. 150861 (A) 1" H&L disk assort. pack......... $4.99 150862 2" H&L disk assort. pack.............. $9.99 150863 3" H&L disk assort. pack............ $14.99 150859 (B) 3" x 4" soft touch pad pack.. $21.99 150860 (C) 1/2" x 5" sanding stick pack.. $10.99

C

110

These sheets offer superior sanding performance for a premium surface finish. Excellent on all surfaces and coatings. They will not clog, tear or transfer color. Aluminum oxide. Handy Packs, 3 sheets per pack. 145034 400 grit................. $5.50 145033 320 grit................. $5.50 143728 220 grit................. $5.50 143727 180 grit................. $5.50 146357 150 grit................. $5.50 143726 120 grit................. $5.50 145032 100 grit................. $5.50 146358 80 grit................... $5.50 Job Packs, 20 sheets per pack. 827647 400 grit...............$11.50 827646 320 grit...............$11.50 827645 220 grit...............$13.25 827644 180 grit...............$13.25 828419 150 grit............... $16.99 827648 100 grit............... $16.99 827643 120 grit............... $16.99 146362 80 grit................. $16.99

For wet, oil, or dry sanding primer, sealer, varnish, lacquer, enamel, and other top coats. Save Money! Make Your Own Sanding Sleeves.

Drum design eliminates the need to buy replacement sanding sleeves. Simply cut and fit any type of sheet sandpaper to the drum. Drums have balanced solid cores with sponge rubber backing to ensure long wear of sandpaper. Unique pinlocking device is simple and effective. Drums can be attached to a 1/2" motor arbor or used in a drill chuck. Use on drill presses, lathes, motors, combination tools, radial saws, and portable drills.

Dia. x Length x Shaft

06P13 06P21 124297 06P31 06P41 06P14 06P16 06P51 06P15 06P61

x 21/4" x 1/4"............................ $17.99 1" x 3" x 1/4"..................................$22.99 11/2" x 3" x 3/8"..............................$24.99 2" x 3" x 1/2"..................................$24.99 21/2" x 3" x 1/2"..............................$24.99 21/2" x 41/2" x 1/2"..........................$26.99 21/2" x 6" x 1/2"..............................$30.99 3" x 3" x 1/2"..................................$25.99 3" x 41/2" x 1/2"..............................$28.99 3" x 6" x 1/2"................................. $32.99 3/ " 4

Micro-Mesh Sanding Kit

Wo o d w o r k e r s have discovered that these incredibly fine abrasive cloths put a polished sheen on bare wood and a handsome luster on finish coatings. This set is ideal for pen makers with the paper sized for sanding right on the lathe! Abrasive crystals last up to 15 times longer than normal abrasives. Kit (A) includes one 3" x 4" piece of each of nine abrasive grits from 1,500 to 12,000 and a foam sanding block. Kit (B) includes two 3" x 6" pieces of each of nine abrasive grits from 1,500 to 12,000 and a foam sanding block. 142940 (A) small kit................................... $19.99 11L61 (B) large kit...................................$45.99

Credit Card Orders: 800 225-1153

9" x 11" 3X Sheets

Wet Sand Sheets

Sleeveless Sanding Drums

A B Micro-Mesh Sanding Assortment Packs

Aluminum oxide, 5 per pack. 146331 2000 grit.............. $4.99 146332 1500 grit.............. $4.99 146333 1200 grit.............. $4.99 146334 800 grit................ $4.99 85W10 600 grit................. $4.99 85W11 400 grit................. $4.99 85W12 320 grit................. $4.99 85W13 220 grit................. $4.99 85W14 asst. pack............. $4.99

Aluminum-oxide belts for heavy stock removal, finish sanding, polishing. 6" x 48" Belts, 1 per pack. 146352 220 grit................. $9.99 146351 180 grit................. $9.99 146350 120 grit................. $9.99 146349 100 grit................. $9.99 146348 80 grit................... $9.99 146347 50 grit................... $9.99 4" x 24" Belts, 2 per pack. 146366 180 grit...............$15.99 146365 120 grit...............$15.99 146364 80 grit.................$15.99 3" x 24" Belts, 5 per pack. 146368 120 grit...............$12.50 146369 100 grit...............$12.50 146370 80 grit.................$12.50 146371 36 grit.................$12.50 3" x 21" Belts, 5 per pack. 146372 220 grit................. $8.99 146373 120 grit................. $8.99 146374 80 grit................... $8.99 4" x 36" Belts, 1 per pack. 146378 80 grit................... $6.50 146379 120 grit................. $6.50 146380 220 grit................. $6.50 1" x 30" Belts, 3 pack assortment. 151251 fine/med/coarse. $9.99

Extra-Long Drum Sanding Set

Turns your drill or drill press into a mini spindle sander. Use it to clean up bandsaw marks on contour cuts, smooth rough edges, or sand the inside surfaces of deep drilled holes on toys or other projects. 12-piece set contains four 1/4" shank drums, 1/2" x 2", 3/4" x 2", 1" x 2", and 11/2" x 2". One coarse (50 grit) and one fine (120 grit) sleeve is included for each drum. 07P41 12-piece kit.................................. $12.99 128456 sanding drum, 1/2" x 2"................. $3.99 128457 sanding drum, 3/4" x 2"................. $4.50 128458 sanding drum, 1" x 2"................... $4.99 128459 sanding drum, 11/2" x 2"............... $4.99 Replacement Sleeves. Cloth-backed aluminum oxide. Package contains 12 sleeves. Coarse (50 grit)

Medium (80 grit)

Fine (120 grit) Dia. x Lgth.

09V12 09W23 09V34 09T41

07W43 07W53 08G33 08I62

07O41 07O42 07O51 07O52

1/ " 2 3/ " 4

x 2"...........$7.99 x 2"...........$7.99 1 x 2"............. $8.99 11/2" x 2"....... $9.99

WoodRiver® Glue Disposable Syringes

Have you ever ruined expensive glue injectors after forgetting, or failing, to clean them? If you have, then we have the answer for you - disposable glue syringes. They’re inexpensive enough to throw away after every job, but durable enough to clean out and save. Perfect for placing glue just where you need it, whether it’s in dowel holes, biscuit slots or delicate assemblies. Bag of 5. 148674 ....................................................... $5.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Glue The Best Epoxy On The Market Today!

D A

SORBY Hook & Loop Bowl Sanding System

Heavy-duty foam pads are flexible enough to follow the contours of your turnings and, unlike cheaper kits, are durable so they resist tearing when you use heavy grit paper. Hook and loop backing not only firmly secures the disc to the pad, but also makes grit changes quick and easy. For use with portable electric drills, maximum 1,750 RPM. Complete kit includes a 2" pad, 3" pad, and one each of 60, 120, and 240 grit discs for each size pad. 17K88 complete kit Best Value! . ............ $79.99 17K70 2" foam sanding pad...................... $32.99 17K71 3" foam sanding pad.......................$40.99 Sanding discs in bags of 25. 2" Discs

17K72 .......$10.99 17K73 .......$10.99 17K74 . ......$10.99 17K75 .......$10.99 17K76 .......$10.99

3" Discs

60 grit 120 grit 180 grit 240 grit 400 grit

17K82 .... $19.99 17K83 .... $19.99 17K84 .... $19.99 17K85 .... $19.99 17K86 .... $19.99

Professional Sand-O-Flex Contour Sander

This tool virtually eliminates difficult hand-sanding of irregular surfaces. The 4" diameter hi-impact plastic wheel has eight adjustable lengths of abrasive paper inside its body. As the wheel revolves, the rotational momentum forces the abrasive cloth flaps into irregular or curved contours. Flexible bristles located behind the sanding flaps offer support to the abrasives and follow them into the contoured surfaces. Sander has 1/4" diameter shaft for use with any drill or a bench motor with chuck adapter which operates below 2,500 RPMs. Includes one 1" wide scored aluminum-oxide abrasive roll 80 grit. 06L31 .................................................... $46.50 Aluminum Oxide Refill Rolls 06K20 80 grit coarse.............................. $13.50 06K30 100 grit med............................... $15.99 06K40 120 grit fine................................. $15.99 06K04 extra brushes (8)......................... $17.99

Workshop Glue Injector

Designed for pinpoint gluing accuracy. Accordianstyle plastic body easily collapses with thumb pressure so glue placement is controlled. Stainless steel needle tip will not bend or close up under pressure. For detail work, forcing glue into furniture joints and cracks, or making repairs. Capacity 1 ounce, includes storage cap. 02I30 2 injectors....................................... $4.50 02I40 10 injectors................................... $19.99

SYSTEM THREE Epoxy

E

The Best Epoxy On The Market Today! This general-purpose epoxy system, with a complete line of additives, gained wide acceptance in the wooden boat building and repair industry, where lives depend on the quality of the adhesives used. Because of the strength of the bond, this system is especially useful for laminated applications like sled runners, structural beams, strip canoes, surf/ snow boards or waterproofing and fiberglassing, cracked concrete oil well linings in Alaska, lobster tank linings, pianos, guitars, outside wooden signs and furniture. Resin and hardener are mixed in an easy 2:1 volume ratio and may be mixed with fillers for better flow control and gap filling. Included with each epoxy system is a FREE copy of System Three’s “The Epoxy Book” which covers use and application. Epoxy Resin is the base for all epoxy coating and gluing applications. Mix 2:1 with hardener. 124520 epoxy resin, quart........................... $26.99 124521 epoxy resin, gallon......................... $84.99 Hardeners. System Three derives its name from the three different hardeners available. The hardeners may be mixed with each other to “fine-tune” the pot life and working time to suit your particular application. Hardener #1 for use down to 35° F even under damp conditions. Pot life at 77° F is 15 min. Hardener #2 general-purpose hardener for 60°F to 85°F, in damp or dry conditions. Pot life at 77° F is 30 min. Hardener #3 for applications in high temperatures which require increased open assembly time. This hardener’s best use is as a mix with Hardener #1 or #2 to slow cure time (increase working time). 124522 hardener #1, pint........................ $22.50 124523 hardener #1, quart..................... $35.50 124524 hardener #2, pint........................ $22.50 124525 hardener #2, quart..................... $35.50 124526 hardener #3, pint........................ $22.50 Plunger Pump Set screws onto epoxy containers and delivers 1 oz. per stroke for resin and a 1/2 oz. for hardener. Easy dispensing and accurate mixing! Pump fits gallon, quart, and pint containers. 124533 (A).................................................$19.99 Fillers And Additives. The B low viscosity of epoxy C makes it a poor gap filler. Additives are necessary to thicken the epoxy and change its flow characteristics. Silica Thickener is an extremely fine powder used to create a very smooth, non-sagging, high-strength mixture. Wood Flour, a very fine, filtered, wood by-product is an excellent all-around filler for creating glues and structural fillers. Wood Flour forms a coarser “epoxy” than silica thickener. Phenolic Micro Balloons are hollow, purplebrown phenolic spheres that are a great low-cost, low-density filler (ideal for areas requiring sanding). Wood Flour and/or Silica Thickener may be blended with Phenolic Microballoons to prevent sagging. 124527 (B) silica thickener, 90 grams....$16.00 124528 silica thickener, 14 oz................ $26.50 124529 (C) wood flour, 1 qt......................... $7.99 Accessories 124531 (D) 10 grad., 12 oz. mixing cups . $5.99 124532 (E) mixing sticks (25).....................$8.99

High-Pressure Glue Injector

Reglues Furniture Without Disassembly Developed by a furniture restoration professional, the secret of this tool is to bore a hole as small as 1/ " into a loose joint. The injector then inserts glue 16 with up to 600 PSI pressure for a sturdy, permanent repair. It’s also great for repairing veneers, cabinetry, musical instruments, and craft and hobby work. Supplied with 1/32" solid brass nozzle, high impact plastic body with removable plunger. 1/16" tip available for higher volume application. For use with water-based glues. 12P01 .....................................................$25.50 12P02 extra 1/32" nozzle.............................$7.99 12P03 extra 1/16" nozzle.............................$7.99

Professional Glue Bottle

This seamless, synthetic, 14 oz. rubber bulb is easily cleaned and provides a continuous, even flow of glue. The large metal opening makes refilling the bottle quick and easy. Interchangeable brass tips to ensure long life and correct glue distribution. Bottle comes with a general, 5/32" aperture gluing tip. 04H53 .......................................................$28.50 04H54 dowel tip, four 5/64" apertures. ...... $4.50 04H55 precision tip, one 5/64" aperture..... $2.99 Complete Set includes professional glue bottle, and dowel, precision, and biscuit tips. 129971 .......................................................$44.99

QUIKWOOD Epoxy Putty

Combines the reliability and strength of 2-part epoxy wood repair materials in a single component. No measuring or stirring is necessary. Just pinch off a bit of the Quikwood “log” which contains both the filler and catalyst, and knead it with your fingers. It’s now ready to fill nail holes, dents, rebuild carving mistakes, restore rotten wood voids, or reshape a decorative piece. For exterior or interior use. It can be sawed, drilled, carved, sanded, painted, and will not shrink. Cures in just 30 minutes. 17C71 neutral, 2 oz....................................$7.50 147102 neutral, 1 oz................................... $4.99 142517 pine, 1 oz........................................ $4.99 142516 dark, 1 oz........................................ $4.99

COUNT ON US FROM START TO FINISH TM

Helping You Make Wood Work ®

111


Glue A A

B

C

D

Instant Glues

Cyanoacrylate adhesives are available in a variety of formulas to handle all your bonding needs for wood, metal, leather, rubber, glass, ceramics, and most plastics. (A) Special “T” Adhesive is very thick, like mixed epoxy. It has gap-filling abilities with a slow cure for difficult alignment jobs. Like Super “T”, it is great for “fixing” cracked blanks for turning. Cure time 30-50 seconds, 2 ounces, non-toxic. 08X31 ..................................................... $11.99 (B) Super “T” Adhesive has the consistency of syrup and will fill small gaps between parts. . Bonding time 10-25 seconds. 2 ounces, non-toxic. 08X11 . ...................................................... $10.99 (C) Hot Stuff Adhesive is water-thin and is used for bonding parts that fit together well. Bonding time 3-5 seconds. 2 ounces, non-toxic. 08X21 . .......................................................$10.99 (D) Super-Solvent will remove instant glues from hands, clothes, surfaces, etc. Not to be used as a thinning agent. 2 oz. 08X51 ................................ $8.99 Aerosol Accelerator is easier to use than a pump, holds almost 4 times as much liquid and doesn’t evaporate. 6 fluid ounces, non-flammable, does not contain CFC’s and can be stored anywhere. 144829 ..............................$12.99 Hot Stuff Pro Tips. Precision-control extension applicators attach to existing tip for pin point placement of CA glue. 127821 pro tips (12).............. $1.99 08X12 replacement nozzle & cap (2)....... $2.50 08X42 replacement spray pumps (2)....... $2.50

TITEBOND Glue

B

C

This yellow aliphatic resin adhesive offers the fast set and handling ease of white glues, and tack-toughnessdurability of hide glue. Setting time 10-30 minutes, depending on temperature and moisture of wood. Allow 24 hours for full-strength bond. Non-toxic, nonflammable. 07L41 8 oz. . ........................... $3.99 08L21 16 oz. ..........................$5.50 08L31 32 oz. ..........................$8.99 08L41 gallon..........................$20.99

D

TITEBOND Instant Bond CA Adhesives

Franklin has been a leader in bonding wood and wood products for 70 years. The latest addition to their product line, Titebond Instant Bond Adhesive, has features not found in other CA glues. A two-year shelf life means your glue will last longer, triple distillation produces a superior quality product with a tensile shear strength of over 4000 psi, and a service temperature range from -65°F. to +200°F. Bottles feature no clog tips for ease of use. Available in a variety of thicknesses for multiple applications. $10.50 $21.50 $32.99 Assembly/Cure Time 2 oz. 4 oz. 8 oz. A. Thin 5/3 sec. 149430 149431 149432 Med. 7/5 sec. 149433 149434 149435 B. Thick 10/8 sec. 149436 149437 149438 C. Gel 30/20 sec.

$13.99 $22.99 $43.50 149439 149440 149441

$9.25 $13.50 D. Inst. Bond Activator 149442 149443

5-Minute Epoxy

Epoxies are the only adhesive to use when strong, fast bonds are required on wood, most metals, fiberglass, ceramics, concrete, glass, leather and many plastics. Use this two -part epoxy mix (equal portions of resin and hardener) for quick and easy results. 124270 1/2 pint............................................ $17.99 124269 1 pint..............................................$36.99 143147 syringe 1.6 oz............................... $11.99

GORILLA Glue

Gorilla Glue is environmentally friendly, 100% waterproof, will not freeze, requires no mixing, and will not expand or contract in the glue joint. Apply Gorilla Glue to one surface, so your glue lasts twice as long. Clean up with denatured alcohol, thinner or other common solvents. Gorilla Glue is 100% pure and contains no solvents or additives—you get what you pay for. 142713 2 oz................................................. $4.99 140350 4 oz................................................. $8.50 111175 8 oz............................................... $13.99 08X64 18 oz..............................................$17.99 08X65 36 oz.............................................$29.99

Glue Bottle Applicator Set

This complete set includes an 8-ounce storage bottle with storage cap, an applicator tip with cover for dowel holes, an applicator tip with cover for biscuit slots, and a 21/2" wide roller with an attached storage cap for flat surfaces. 143566 glue bottle set............................... $13.50 128927 bottle & biscuit-slot tip only.............$7.99 04H52 bottle & 21/2" glue roller only.......... $8.99

WOODCRAFT Liquid Storage Containers

Hold just about any liquid you use in the woodshop. Made of high-density polypropylene, complete with spout and tip. Great for glues, stains and finishes. Each

Titebond Extend Wood Glue. The same aliphatic resin found in the original Titebond glue but formulated for slower set and longer open time. 140441 16 oz................................................ $6.99 124511 gallon.............................................$24.99

TITEBOND II Water-Resistant Glue

Water-resistant and needs no mixing! It’s the first one-part glue to pass Type II water-resistant testing. Not for use under water. Freeze/thaw stable, paintable, solvent-free, and non-toxic. 08L42 8 oz. . .....................$5.99 08L43 16 oz. ..................... $7.50 08L45 32 oz. ..................... $9.50 08L44 gallon.....................$23.99 Titebond II Dark Wood Glue. The same aliphatic resin found in Titebond II but specially formulated for darker woods. 08L46 8 oz................................................$4.99 08L47 16 oz...............................................$6.50 Titebond II Extend Wood Glue. The same aliphatic resin found in Titebond II glue but formulated for slower set and longer open time. 140442 16 oz............................................... $7.99 124512 gallon............................................$26.99

TITEBOND III Waterproof Glue

Titebond III wood glue is waterproof, yet it cleans up with water. Eight minutes of open assembly time and offers an application temperature as low as 47°F. 145560 4 oz................................................. $4.50 145561 8 oz................................................. $6.50 145562 16 oz............................................... $8.99 145563 32 oz.............................................$14.50 145564 1 gallon........................................ $35.99

TITEBOND Liquid Hide Glue

Holds more than 3,500 lbs. per square inch. Moderate set time (usually over one hour depending on temperature and moisture) permits unhurried assembly of wood, cloth, glass, etc. Allow 24 hours for full-strength bond. 146011 16 oz..............................$12.50

10+

124564 8 oz.............$2.50 .... $2.25 124563 extra spout/tip..............$.50

112

Credit Card Orders: 800 225-1153

Free Technical Advice: 800 535-4486

www.woodcraft.com


Finishing

Varathane®® Oil Stain

Varathane® Interior Water-Based Finish

Varathane®® Premium Wood Stains use the finest pigments to highlight the grain in wood, as well as an exclusive soyaoil based formulation that penetrates up to twice as deep as other brands of stain to bring out the richness in your furniture.

Disposable Glue Brushes

These quality horsehair brushes are indispensable tools for evenly spreading glue, paste, grease or other substances found in the shop. Metal handles are 51/4" long, coated in tin plate, and are clinched to firmly hold the 3/4" long stiff bristles. Two widths, 1/ " and 1/ ", are available in packs of 48 each. 4 2 04Z41 1/4" width............................................ $9.50 04Z51 1/2" width..........................................$10.50

TIMBERMATE Wood Filler

This is wood filler as it was meant to be! Timbermate is a unique, quick-drying, water-based grain filler and wood putty that accepts stain beautifully, can be tinted, does not shrink or crack. So how is it different? It never goes bad! If it freezes put it in the microwave to warm it up. If it dries out, add some water, stir and you’re back in business. Timbermate recommends using only stainless steel or plastic tools to apply to avoid any reaction with low-grade steels that may turn the putty “black.” Even if this happens, because Timbermate is not permanent until a finish is applied, simply add water to remove the stained filler, allow the area to dry, then sand off and apply the putty again. Literally, up until the moment that finish is applied, if you’re unhappy with the result, the color or any reason at all...water it down and remove it. 841442 American cherry, 8 oz....................$6.99 841443 Australian cypress, 8 oz.................$6.99 841444 Brazilian cherry, 8 oz......................$6.99 841445 Australian cedar, 8 oz....................$6.99 841446 Tasmanian oak, 8 oz......................$6.99 841447 mahogany, 8 oz. . ...........................$6.99 841448 maple/beech, 8 oz. .......................$6.99 841449 red oak, 8 oz.................................. $6.99 841450 ebony, 8 oz......................................$6.99 841451 walnut, 8 oz. ...................................$6.99 841452 white oak, 8 oz................................$6.99 841454 white 8, oz. .....................................$6.99 148740 natural, 8 oz.................................... $6.99 148741 natural, qt. . ..................................$19.99

Nitrile Gloves

Protect your hands from the solvents found in finishes and stains. 100% Nitrile is unaffected by many solvents including acetone, mineral spirits and paint thinners. But don’t let their cost or thinness fool you. These gloves are tough, tough enough to be used multiple times yet inexpensive enough to be considered disposable. Gloves are 4 mil thick, 100% nitrile, light blue in color with a lightly pebbled surface for better grip, and a rolled cuff. Box of 100 gloves. 148343 medium, size 7-8.........................$13.99 148344 large, size 8-9..............................$14.99 148345 xlarge, size 9-10..........................$15.99

Sample Pack Half Pints

natural summer oak golden pecan colonial maple traditional pecan Ipswitch pine spring oak golden oak provencial golden mahogany light walnut light cherry chestnut traditional cherry red oak red mahogany red chestnut cabernet American walnut early American dark walnut gunstock

$ .50 150332 150333 150334 150335 150336 150337 150338 150339 150340 150341 150342 150343 150344 150345 150346 150347 150348 150349 150350 150351 150352 150353

$4.99 150376 150377 150378 150379 150380 150381 150382 150383 150384 150385 150386 150387 150388 150389 150390 150391 150392 150393 150394 150395 150396 150397

Quarts

$9.99 150398 150399 150400 150401 150402 150403 150404 150405 150406 150407 150408 150409 150410 150411 150412 150413 150414 150415 150416 150417 150418 150419

Varathane®® Distressing Kit

Contains everything you need to simulate years wear on wood. Use the Distressing Tool to easily make dents and divots necessary when creating the authentic, and unique, appearance of a time worn antique. You also get the Worm Holing Tool which is used to simulate the random pattern of insect holes. 150449 ...................................................... $24.99

SYSTEM THREE Mirror Coat

This pour on, selfleveling, 2 part epoxy coating is designed to create a high gloss, c l e a r, d e c o r a t i v e , super hard finish that has more depth than any other topcoat. You can actually create “floating” objects in your finish by embedding them between coats. Perfect for bar and tabletops, de-coupage, small clocks, and crafts. Complete application instructions for an unbelievably clear, deep finish. 143153 11/2 pint kit.....................................$38.50 143154 11/2 quart kit..................................$66.99 148352 3 quart kit....................................$107.99

Formulated to let wood’s natural beauty show through with the highest possible clarity while providing a truly durable surface with superior resistance to scratches and stains. Easy to apply, water clean-up and a fast drying time make this finish perfect for the weekend woodworker. Available in quarts only.

Each

4+

150454 gloss........................... $18.99........$17.09 150455 satin........................... $18.99........$17.09 150456 semi-gloss.................. $18.99........$17.09

Varathane® Interior Polyurethane Oil Finish

Varathane® Interior Polyurethane Oil provides outstanding scratch and stain resistance to keep projects looking good while imparting a rich, warm glow to your work. It’s also self leveling which means there won’t be any strokes or swirls to contend with afterwards. Available in quarts only.

Each

4+

150451 gloss............................. $14.99..... $13.49 150452 satin............................. $14.99..... $13.49 150453 semi-gloss.................... $14.99..... $13.49

Varathane®® Exterior Water-Based Finish

A water-based, non yellowing Spar Varnish formulated to provide outstanding UV protection, durability and phenomenal resistance to the elements. A great outdoor finish for picnic tables, potting benches, Adirondack chairs and any other outdoor project. Easy to apply, water clean-up and quick drying.

Pint

Quart

$13.99 $19.99 gloss ....................................... 150443......150446 satin ....................................... 150444...... 150447 semi-gloss................................. 150445......150448

Varathane® Specking Kit

Now you can create a subtle spatter effect just like a professional adding visual interest and a distinctive aged look to any wood project. Contains a special brush and three bottles of specking; light, medium and dark. 150450 .......................................................$16.99

It's Easy To Get To Woodcraft

Call, Click, or Walk-in

800 225-1153 www.woodcraft.com

Helping You Make Wood Work ®

113


Finishing

GENERAL FINISHES Arm-R-Seal

Arm-R-Seal topcoats are made with only the highest quality urethane resin, making them extremely durable and long lasting. They are formulated to be “wiped on” with a cloth or applied with a foam brush, thus eliminating drips and sags. They penetrate to provide deep down protection and that “natural” look. Arm-R-Seal is available in satin, semi-gloss, and gloss. For more information visit www.woodcraft.com Pint Quart $10.99 $14.99 Cannot ship to California satin .................................. 85F03.........85F08 semi-gloss................................. 85F02.........85F07 gloss .................................. 85F04.........85F09

GENERAL FINISHES Water Based Dyes

General Finishes dyes are ready to use, water based formulations designed to give you deep, rich colors without raising the wood grain. These easy to use dyes can be used straight out of the can, or can be diluted with the Neutral Base or water or intermixed with General’s other water based stains and finishes to create a full palette of colors and tones. Color Pints Quarts $11.99 $16.99 amber.......................................148600 blue...........................................149541 cinnamon..................................148601..... 150771 dark brown...............................148602.....150772 ebony........................................148603.....150773 empire red................................148604..... 150774 green.........................................149542 light brown................................148605.....150775 medium brown.........................148606..... 150776 merlot ......................................148607..... 150777 orange.......................................148608 vintage cherry...........................148609.....150778 yellow........................................ 148610 reducer/neutral........................ 148611

GENERAL FINISHES Water Based Finish Cross Linker

General’s Cross Linker is an additive used to increase a water based finish’s adhesion and durability. Contractors have been using this technology to produce harder, more scratch resistant finishes on flooring for years. Now, this “industrial” protection is available to homeowners everywhere. Just one ounce added to one quart of finish or one 4 oz. bottle to a gallon of finish. Best yet, any finished that remains unused is not wasted. Unlike solvent based cross linkers, where the used cross link/finish mixture hardens and become unusable, the effect of General’s Cross Linker’s last for 10 days and after that your finish returns to “normal” and can be used as such. 149267 4 oz................................................$28.99

114

GENERAL FINISHES Gel Topcoat and Stains

These oilbased Gel Topcoats and Stains are quite possibly the easiest of all finishes to use and achieve Cannot ship to a “handCalifornia rubbed” look without all the work. Application is easy with a foam brush or lint free cloth. The heavy bodied gel formulation permits the product to flow out evenly (no drips or runs) preventing uneven penetration for consistent color control. Combined with no sanding (your choice to sand or not) between coats and a quick “recoat” time, you’ll be finished sooner with less effort and better results than ever before. Choose from the colors listed below or make your own. General Finishes Gel Topcoats and Stains can be combined with each other in any proportion to create your own custom colors or to match an 1/ Pint existing one. Pint Quart 2 $7.99 $13.99 $19.99 clear satin topcoat .....826989 826990 826991 American oak .............826956 826957 826958 antique walnut ...........826959 826960 826961 brown mahogany .......826962 826963 826964 candlelite ....................826965 826966 826967 colonial maple . ..........826968 826969 826970 georgian cherry .......... 826971 826972 826973 golden pine . ................826974 826975 826976 java ............................. 826977 826978 826979 new pine .....................826980 826981 826982 nutmeg .....................826983 826984 826985 prairie wheat ..............826986 826987 826988

GENERAL FINISHES Milk Paint

Milk Paints are the star of the furniture fashion market. General Finishes Milk Paints are premixed water-based acrylic paints suitable for a variety of interior or exterior applications from furniture to crafts. They can be applied directly from the can or mixed with any other General Finishes’ water-based product to create any number of special effects including, but not limited to, distressing, marbling, antiquing and rag rolling. Pint

Quart

$12.99 $19.99 buttermilk yellow...................825753 antique white........................825755..........825756 brick red ...............................825757..........825758 federal blue...........................825759 lamp black............................. 825761..........825762 snow white.............................825763..........825764 autumn haze.........................825765 sage green............................. 825767 baby blue.............................. 828535 basil ...................................... 828536 linen .......................................828537 little pink .............................. 828538 millstone .............................. 828539 red pepper............................ 828540 bayberry green......................148932 coastal blue...........................148933 cypress green........................148934 outback brown......................148935 somerset gold.......................148936 tuscan red.............................148937

Credit Card Orders: 800 225-1153

Enduro-Var by General Finishes

When General Finishes first told us about this new water based urethane, to be honest, we were skeptical. However, after testing and using Enduro-Var all skepticism vanished as we realized this was not the typical water based top coat. First, Enduro-Var uses a colored urethane resin which, like oil imparts a warm glow to wood that darkens or ages over time. Second, it’s an air oxidizing, rather than a simple evaporative, finish which means exposure to air facilitates the cure. This curing process produces an incredibly tough finish that is suitable for any interior application, including floors. Combine these two winning characteristics with the ease of water based application and we think you’ll agree that there is no better finish available. If you’ve been hesitant about using water based finishes, we challenge you to cast your skepticism aside and use Enduro-Var on your next project. Pints Quarts $16.99 $26.99 Gloss ................................... 151025..... 151026 Semi-Gloss.................................151027..... 151028 Satin ................................... 151029..... 151030

GENERAL FINISHES Polyurethane & Acrylic Blend

These finishes are the best water-based finishes we have ever used. Formulated to resist foaming and prevent sags, they won’t run like ordinary water-based finishes. Tack free dry time is only 15 minutes. Dry time between coats is 2-4 hours, so you can finish a project in short order. Polyurethane & Acrylic blend, PA, is the standard topcoat and is available in a convenient aerosol can. High Performance Polyurethane, HPP, contains all the characteristics of the Poly/Acrylic blend, but also a UV stabilizer to protect it from breaking down in sunlight. These are, without a doubt, the best water-based polyurethanes on the market today. Pint

Quart

Gallon

Poly/Acrylic Blend $12.99 $19.99 $47.99 PA matte................. 146809..... 146810 NA PA satin...................... 85T55....... 85T56.... 813298 PA semi-gloss...........817747..... 817746.....816867 PA gloss..................... 85T57....... 85T58.....812051 HPP Perf. Poly $15.99 $24.99 $62.99 HPP satin................... 85T59....... 85T60..... 811247 HPP semi-gloss........148414..... 148413.....148412 HPP gloss................... 85T61....... 85T62.....813297 Sanding Sealer. A clear water-based sealer made from acrylic and zinc stearate that sands easily and helps build a smooth surface. The perfect foundation for High Performance Poly or Poly/Acrylic Blend. 813684 sanding sealer, quart.................... $16.99

Salad Bowl Finish

General Finishes Salad Bowl Finish is non-toxic and food safe when dry. It works well for wooden bowls, plates, cutting boards, eating utensils, and other wood surfaces that come in contact with food. It is also highly resistant to water and food stains. Salad Bowl Finish is applied with a clean soft cloth. Cannot ship to California 125374 pint................................................ $10.99 125375 quart............................................. $15.50

Free Technical Advice: 800 535-4486

www.woodcraft.com


Exterior 450 Stains By General Finishes

Water based, exterior, pigmented stains with U.V. absorbers and mildewcides for maximum protection and color retention. What? That’s another way of saying phenomenal colors and extraordinary, lasting protection are now available for all your outdoor projects. Picnic tables, Adirondack chairs, planting benches, trellises will all benefit from having a little added color. Exterior 450 stains may be used alone or as a top coat with Exterior 450 clear coats. General’s legendary quality – now available in colors for the great outdoors. Quart 151031 natural base.................................. $14.99 151032 black walnut.................................. $14.99 151033 butternut........................................ $14.99 151034 cedar.............................................. $14.99 151035 coffee bean................................... $14.99 151036 red mahogany............................... $14.99 151037 olde cherry..................................... $14.99 151038 sugar maple................................... $14.99 150039 chestnut......................................... $14.99

WATCO Penetrating Danish Oils

WATERLOX Finishes

Pint

GENERAL FINISHES Enduro Water-Based Pre-Cat Urethane Finishes

Enduro Water-Based Pre-Cat Urethane Finishes are professional grade products specially formulated for application by sprayer. The latest resin and cross-linking technology is utilized to provide maximum toughness, durability and water resistance. Performance that's comparable to any conversion varnish or pre-catalyzed solvent-based product on the market today. Note: Enduro Water-Based Pre-Cat Sanding Sealer must be used on new wood prior to applying Enduro WB Pre-Cat Urethane topcoats. 149268 (A) sealer........................................$24.99 149272 (B) urethane qt. gloss...................$28.99 149269 urethane qt. flat............................$28.99 149270 urethane qt. satin.........................$28.99 149271 urethane qt. semi-gloss................$28.99

WOODCRAFT 100% Pure Tung Oil

07S21 07S31 07S41

Oil Of Cedar Wood

Restores the aroma of cedar lined chests and closets. Just apply to unfinished wood with a clean cloth. 100% pure oil is distilled from aromatic red cedar. Rejuvenates the wood’s odor and moth protecting qualities. May be used on any wood species, anywhere you want to deter insects. 14Z11 8 oz.........$18.99

Developed by renowned bowl turner Mike Mahoney, this utility finish is filtered, 100% pure walnut oil. It will harden into a food safe satin finish for bowls, butcher blocks, wood utensils, and other wooden utility ware. Just wipe on or immerse and let it penetrate and harden for 24 hours, then reapply as desired. Leaves a great satin finish on all hardwoods and exotic woods. Contains no petroleum distillates and is completely safe for food contact after drying. 16 oz. 146022 .......................... $13.50

1 pint............................................. $12.99 1 quart........................................... $19.99 1 gallon..........................................$54.99

B

HUT Crystal Coat

Crystal Coat is a liquid friction finish that produces a glass like surface on wood in seconds. Apply and buff while your project is still on the lathe! A mixture of shellac and water resistant carnauba wax, just a drop finishes small turnings in seconds. Comes in a user friendly squeeze bottle for no mess, no waste application. For toys and carvings simply wipe on and hand rub or power buff to the desired luster. 6 oz. bottle. 141049 .................................. $11.99

MAHONEY'S Walnut Oil

Used for centuries as both a complete finish and component in natural resin varnishes. It gives a finish that is transparent, natural, and highly resistant to water and alcohol. Unlike surface finishes, tung oil penetrates wood and hardens within. Additional coats may be added and rubbed to a high gloss. Our tung oil is 100% pure and contains no petroleum distillates. It may be thinned with turpentine or paint thinner.

Quart

$10.99 $14.99 natural................................... 123976 ........ 123977 light walnut............................123978 ........123979 medium walnut.....................123980 ........123981 dark walnut ..........................124873 ........124875 black walnut................................................. 146169 cherry . .................................146093..........146094 fruitwood .............................. 124874.......... 124876 golden oak.............................123985 ........123986 red mahogany.......................146447..........146448

These premium wood finishes are tung oil-based products that go on easily with a brush, lambswool applicator, cloth, roller or spray. Waterlox Cannot ship to California resists alcohol, hot liquids and similar problems, while sealing the wood and hardening and enhancing the wood’s natural appearance. Excellent for use on oily exotics such as teak and rosewood. For interior use, child safe when dry. 37J21 quart, original sealer/finish.........$26.99 146079 quart, satin,................................... $37.99 142459 quart, high gloss.......................... $34.99 Marine finish dries to a high gloss that enhances wood’s natural patina, while protecting it from wind, sun, rain and salt spray. Original Marine Finish penetrates and waterproofs. Easily applied with almost any method including roller, brush and cloth. 85W54 quart, original marine finish.........$39.99

A B

Watco, the original Danish furniture oil, is back! It’s rich finish is a result of a special blend of oils and resins that penetrate, seal, and preserve wood surfaces. Unlike plain linseed oils, Danish oil also contains resins which polymerize and dry in the wood and not on it. Watco finishes will not gum up in hot, humid weather. The Natural oil contains no pigments and will not color the wood. Coverage for all Watco finishes is 200-300 square feet per gallon.

Finishing

(B) Suede-Tex Flocking Fibers, in eight attractive colors. 3 ounces covers about 15 square feet, 1 lb. covers about 75 square feet.

C A Suede-Tex Flocking Supplies

Gives a beautifully soft, velvety finish that’s far superior to felt padding and much less trouble to apply! There’s no cutting or pasting required. Simply paint on a special under coat of adhesive, then spray on the Suede-Tex fibers. They’re specially prepared rayon, dyed in rich, fade-resistant colors and cut to a uniform 1/32" length. Your finished surface will be lustrous, evenly napped and soft to the touch, ideal for lining boxes or drawers, and for coating the bases of project pieces. (A) Mini Flocker is easy to use. Just put a small amount of fibers in the tube and gently pump them on to your prepared surface. 127115 ......................................................... $5.50

Color

3 oz.

1 lb.

$11.99 $26.79 medium blue........................14X31 .............14X32 blue (light).............................16Y66 ............. 16Y76 brown....................................14X11 ............. 14X12 bright red..............................14X41 .............14X42 wine.......................................17C22 ............. 17C23 emerald green......................17C12 ............. 17C21 kelly green............................14X21 .............14X22 black................................... 16W43 ............16W44 (C) Undercoat Adhesive. 8 oz. cans, 15 sq. ft. coverage. $11.99 Each 14X61 med. blue 17H32 blue (light) 14X51 brown 14X62 bright red 17H42 wine 17H41 emerald green 14X52 kelly green 17H31 black

Helping You Make Wood Work ®

115


Finishing BEHLEN Fingerboard Oil

Preserve the feel and appearance of your instrument’s fingerboard. Perfect for use on unfinished wood because it dries hard and tack free but can also be used on older instruments to rejuvenate and protect. Periodic reapplication will keep your fingerboard from drying out and in tip-top shape. 4 oz. bottle. 149902 .............................. $6.99

BEHLEN Finish Rub

Not quite as fine as the Buffer’s Polish, Finish Rub is used to create or restore a cured finish to a satin sheen. This polish is for those who prefer a more subtle satin finish over the high gloss look. Can be applied by hand or mechanical means. Quart. No CA shipments. 149922 .......................................................$12.99

BEHLEN Buffer’s Polish #5

This is an extremely fine buffing agent for application to a cured finish to create that professional, hand rubbed, high gloss or “wet” look sheen that is desirable on musical instruments. Can be applied by hand or mechanical means and is sold in pint bottles. No CA shipments. 811304 ............................ $13.99

BEHLEN Solar-Lux™

The fade resistant, vibrant colors of Behlen’s Solar-Lux™ dyes are translucent to enhance the grain pattern of wood - not obscure it like pigments - plus, they’re easily applied and quick to dry, usually in 5 minutes or less depending upon application so they won’t hold your work up. If needed, they can be thinned with the Reducer and drying time increased with the addition of the Retarder. Use only with adequate ventilation and an appropriate respirator such as our 141623 Multi Purpose Respirator. 16 ounce bottle.

BEHLEN RockhardTM Table Top Varnish

This top of the line natural oil and resin varnish lives up to its name. The extra hard, high gloss finish offers maximum resistance to water, alcohol, abrasion, heat, chemicals, detergents, and other damaging liquids. Furnished in brushing consistency, it will set dust-free in 30-60 minutes, dries in 4-5 hours depending upon conditions. For interior use only. Use Rockhard Reducer for thinning and cleanup. No CA shipments. 812695 1 pint............................................ $11.99 18Z42 1 quart..........................................$19.99 18Z51 1 quart reducer..............................$8.99

BEHLEN Woodturner’s Finish

TransTint Dyes

Developed by renowned restorer and finisher Jeff Jewitt, these new dyes are more versatile than any we’ve ever seen! TransTint dyes can be mixed with water for an economical, non-flammable stain or with alcohol for a fast drying, non-grain raising stain. For use as a toner or “shader”, dyes can be added directly to waterbased finishes and solvents to create a perfect match for touch-ups or a unique, customized finish. TransTint dyes can even be added to shellac, catalyzed lacquer and varnish, water-based lacquer and polyurethane, and most oil-based finishes. Not for exterior use. Each 2 oz. bottle yields about 2 quarts of dye-stain. 128481 honey amber................................$18.50 128482 golden brown...............................$18.50 128483 reddish brown..............................$18.50 128484 medium brown............................$18.50 128485 dark walnut..................................$18.50 128486 dark mission brown.....................$18.50 128490 black.............................................$18.50 146956 amber...........................................$18.50 819063 cordovan......................................$18.50 819064 brown mahogany.........................$18.50 821810 bordeaux......................................$18.50 821825 dark vintage maple.....................$18.50 828382 red mahogany..............................$18.50 128487 lemon yellow................................$18.50 128488 bright red.....................................$18.50 128489 blue..............................................$18.50 828383 purple...........................................$18.50 128491 bright green.................................$18.50 128492 orange..........................................$18.50

116

Create a stunning high-gloss, wet look finish in seconds. Apply and buff while your project is still on the lathe - there’s nothing easier or quicker. In fact, we regularly use Woodturner’s Finish for pen, pencil, and other small turning projects. This is the secret to producing a professional look for your handcrafted pens and pencils. 16 oz. No CA shipments. 09S53 .....................................$18.99

HOMESTEAD TransFast Dye Powders

Developed by renowned furniture restorer and finisher Jeff Jewitt, these water-soluble dyes outperform any we have tried. Because the dyes contain no fillers or extenders, each 1 oz. bottle makes a half gallon or more of stain, nearly twice as much as most other dyes! Packaged in resealable bottles, you can use only the amount of dye necessary for the project at hand and not have to worry about the remaining powder leaking out of a paper envelope or absorbing moisture like other powdered dyes. Perfect for new work, repairs, or restoration, these deep penetrating colors can be combined to create virtually any shade without hiding the natural features of the wood. Stained surfaces can be coated with almost any type of

Credit Card Orders: 800 225-1153

18X11 18X21 18X41 18X51 18Y11 18Y21 18Y31 812690 812691 812692 812427 812428 146098 146099

black, jet ...................................... $12.99 fruitwood, golden ........................ $12.99 mahogany, med. red ................... $12.99 mahogany, med. brown .............. $12.99 red, blood . ................................... $12.99 walnut, med. brown...................... $12.99 walnut, american ........................ $12.99 blue, sea ...................................... $12.99 brown, nutmeg ............................ $12.99 yellow, lemon ............................... $12.99 cherry ........................................... $12.99 hickory . ........................................ $12.99 retarder ........................................ $11.99 reducer . ......................................... $9.99

BEHLEN Water-Based Grain Filler

Behlen’s water-based grain fillers are easy to apply, and dry considerably faster than do oil-based types. The quick dry feature allows for application and final sanding in a single day, versus the need for at least 24 hours (and preferably 48 or more) with oil-based fillers. Wipe down must be faster, but otherwise application is very similar to oil-based fillers. No VOCs is another great feature. Grain fillers are needed for a really smooth finish in open-pored woods such as red oak, walnut and mahogany. 818892 brown, quart..................................$18.99 818893 mahogany, quart...........................$18.99 818894 natural, quart................................$18.99

finish to bring out the color you’ve applied. These easy-to-use dyes come with the best mixing and application instructions we have seen. Do not store liquid dyes in metal containers. 123824 dark red mahogany........................ $9.50 123821 light red mahogany........................ $9.50 123825 brown mahogany........................... $9.50 123822 extra dark walnut........................... $9.50 123823 medium walnut.............................. $9.50 123826 early American maple.................... $9.50 123827 light oak.......................................... $9.50 123828 mission brown................................ $9.50 123830 antique cherry red......................... $9.50 Accent Colors. Use for decorative highlights, creating pure colored pieces, or for tinting the dyes listed above for custom colors or matching hues on furniture when repairing or restoring. 123836 black.............................................$10.50 123833 blue...............................................$10.50 123831 turquoise blue..............................$10.50 123834 scarlet red....................................$10.50 123835 cardinal red..................................$10.50 123837 lemon yellow................................$10.50 123832 orange...........................................$10.50 123829 dark green....................................$10.50

Free Technical Advice: 800 535-4486

www.woodcraft.com


MIXOL Universal Tints

Mixol Universal Tints are the most concentrated, highest quality tints on the market today. They are compatible with most water, solvent, lacquer and oil-based stains, coatings, shellacs, epoxies, waxes, varnishes, wood fillers, etc... “Ease of tinting or mixing” is often cited as the main attribute to Mixol, along with the “sophisticated” color palette. Mixol tints are highly resistant to heat or frost damage, and they won’t dry out or thicken (because they are binder-free) – so there is a very long shelf/shop life. Our assortment consists of 24 distinct colors, 10 of which are oxide-based (colors 3, 4, 5, 14, 19, 20, 21, 22, 23 & 24). The oxide-based colors are made from inorganic pigments which make them color-fast, fade-resistant and weather-proof. These oxide colors are ideal for exterior applications, or where UV fading may occur. Clean-up is very easy with soap and water. Mixol tints are not flammable or hazardous. Available in 20 ml bottles a little goes a long way.

Mixol 10 Tone Woodworker’s Set This convenient package of 10 colors can create an unlimited variety of shades. Includes the most popular colors black, umber, brown, oxide red, oxide yellow, blue, red, camel, dark brown, white and a color chart. 147216 10 tone set................................... $45.99 20ml $5.50 black (01)....................................................... 832386 umber (02)..................................................... 832387 brown (03)...................................................... 832388 oxide red (04)................................................. 832389 oxide yellow (05) .......................................... 832390 olive green (15).............................................. 832400 lime green (16).............................................. 832401 mustard (17).................................................. 832402 camel (19)...................................................... 832404 chestnut (20)................................................. 832405 terra brown (21)............................................. 832406 tobacco (22)....................................................832407 dark brown (23)............................................. 832408 stone grey (24)............................................... 832409 white (25)....................................................... 832410 green (08)...................................................... 832393 blue (09)......................................................... 832394 red (10)........................................................... 832395 fir green (12)...................................................832397 grass green (13) ........................................... 832398 oxide green (14)............................................. 832399 maize yellow (06) ......................................... 832391 canary yellow (07)......................................... 832392 violet (11)........................................................ 832396 orange (18)..................................................... 832403

Brooklyn Tool & Craft Shellac Flakes

Imported from India,BT&C Shellac Flakes are de-waxed, small, uniform flakes that dissolve easily in alcohol. This is standard shellac and great for most application from sealer to finish. Available in 1 lb., re-sealable bags. 150852 Blonde................$24.99 150853 Garnet................$24.99

Beeswax

While raw beeswax is an often used ingredient in homemade, custom wax polishes, it is also an excellent, light lubricant for wooden moving parts such as drawer slides or wooden bench screws. Screws lubricated with beeswax drive easier in hard woods, and beeswax will not attract or hold moisture! Sold in convenient 1/2 lb. cakes. 08A70 white beeswax 1/2 lb...................... $12.99 08A71 yellow beeswax 1/2 lb.................... $12.99

Carnauba Wax

This high quality, white wax is the preferred choice of cabinetmakers. Often dissolved and combined with other softer waxes, carnauba produces the extremely durable and high gloss characteristics of prepared waxes. Sold in convenient 1/2 lb. cakes. 08A75 ...................................................... $19.50

RENAISSANCE Wax

Preferred by museums worldwide for protecting furniture, leather, marble, paintings and metal, this special blend of micro-crystalline waxes will not stain or discolor with aging. It is acid neutral, water and alcohol resistant. . 200ml, 7 oz. 08G22 ...........................$29.99

Brooklyn Tool & Craft Tiger Shellac Flakes

Imported from Germany, BT&C Tiger Flakes are a cat of a different stripe…..we know, a bad pun, but appropriate. Tiger flakes are highly refined, de-waxed flakes of irregular size, looking more like shard of glass than simple flakes. This is the shellac for any application – French Polishing, sanding sealer, fine furniture finishing or finish restoration for antiques. This is simply the finest shellac we’ve seen. Available in 1 lb., re-sealable bags. 150854 Super Blonde.................................$42.99 150855 Blonde............................................ $37.99 150856 Amber.............................................$34.99 150857 Garnet............................................$34.99

Brooklyn Tool & Craft Pure Anhydrous Alcohol

The finest, purest shellac solvent available. Quarts only. 150858 ....................................................... $14.99

BRIWAX

Finishing

Produces a lustrous patina, not a glossy surface shine. Suitable for use as a finish on new wood or stripped furniture, as a reconditioner for old or damaged finishes, as a furniture wax for fine furniture and antiques or as an antiquing agent where the desire is to “age” a newly painted carving or project. Tinted waxes can be lightened or removed with the clear wax. 16 oz. 85C25 clear.............................................. $15.99 85C26 golden oak.................................... $15.99 85C27 light brown.................................... $15.99 85C28 dark brown................................... $15.99 145504 tudor brown.................................. $15.99 85C29 antique mahogany....................... $15.99 143650 rustic pine..................................... $15.99 144609 ebony............................................ $15.99 844335 dark oak........................................ $15.99 844336 teak............................................... $15.99 844337 0000 steel wool 225gm..............$10.50

MYLANDS Finishing Products

For well over a century, Mylands has been producing high quality finishes with a difference – shellac is the prime ingredient. Long valued for its hardness and tremendous sealing properties, shellac’s versatility allows it to be used to add warm tones to country furniture and high gloss when French polishing. High Build Friction Polish. The most impressive turner’s polish we have ever used. It builds quickly, drying almost instantly, complementing the natural beauty of the wood. When used without a sealer, a smooth sheen results. When used with Mylands Cellulose Sealer, a brilliant high gloss finish is easily attained. 500ml bottle. 813772 ....................................................... $19.99 Cellulose Sanding Sealer. A lacquer-based clear sealer and finish that dries to a soft sheen. It is specially formulated to work with any Mylands finishing product or by itself. A brilliant high-gloss finish can be achieved on turnings when used in conjunction with High Build Friction Polish; a rich matte finish when the waxes are used. This product does not contain shellac. 500ml bottle. 814153 ........................................................$17.99 Waxes. A unique formulation of the finest natural waxes (shellac, beeswax, and carnauba) in a toluene and xylene-free carrier. Can be used over virtually any finish to accentuate and protect. Applies easily and yields a lasting and lustrous shine. 16 oz. 813765 clear.............................................. $15.99 813767 antique brown.............................. $15.99

ANCHORSEAL 2 – The Next Generation Of Anchorseal®®

For nearly 30 years, Anchorseal® has been the sealer of choice for Lumbermen, turners and furniture builders alike to protect their wood investment. Anchorseal 2 is a hybrid sealer that contains renewable, natural ingredients so there is less petroleum based material used in its production for a greener, more economical product that drips less, sticks better, has improved stability and, best yet, better than the original Anchorseal®. Now, new and improved Anchorseal 2 is the choice for prevention of end grain checking. 150808 quart..............................................$10.99 150809 gallon............................................ $21.99

Helping You Make Wood Work ®

117


Finishing

EARLEX HVLP Spray Station Pro

EARLEX HVLP Spray Station 3500

The Spray Station 3500 is the ideal HVLP system for woodworkers and DIYer’s alike. The 500 watt turbine is powerful enough to spray latex paint, but is also able to lay down a fine finish on an heirloom. The secret of the 3500 is the new Expert Control spray gun, which offers a fast 3 pattern changing system, thumb control flow dial, angled pick up tube for overhead or downward spraying and front loading needles that make changing and cleaning a snap. The 3500 comes with a 9' air hose and 7' power cord. Kit includes turbine, air hose, power cord, Expert Control spray gun, 2.0mm stain/latex tip and 1.5mm fine finish tip, viscosity cup, needle/ tip tool, instruction booklet, quick start guide and a How-To DVD. 150851 .....................................................$149.99

WoodRiver® HVLP Spray Guns

C

If you own a compressor, there really isn’t a cheaper or faster way to start spray finishing than this! These self-regulated, gravity-fed HVLP spray guns work right off your compressor. Both guns feature stainless steel needles and nozzles A as well as adjustments for air, fluid and pattern. So simple to operate, they’re almost “plug and spray,” and they offer the advantage (because they are powered by an air compressor) of being powerful enough to spray a broad range of material. The WoodRiver® Pro HVLP Gun is a full-sized gun with a 1/4¼" air inlet and large capacity for big jobs. Comes with a 1.4 mm nozzle and 600 cc plastic cup. 28.8 - 51 psi recommended air pressure, 4.2 - 7.1 cfm Average Air Consumption, 7.1" - 9.8" Pattern Width at about 6"-7" from surface. The WoodRiver® Mini Pro HVLP Gun is a smaller gun with 1/4"¼ air inlet and B smaller capacity. Perfect for touch ups and smaller projects like boxes or crafts. Comes with a .8 mm nozzle and 120 cc plastic cup. 21.6 43.2 psi recommended air pressure, 3.5 - 6.0 cfm Average Air Consumption, 4.3" - 6.1" Pattern Width at about 6"-7" from surface. 149388 (A) WoodRiver® Pro spray gun...... $34.99 149389 (B) Pro 1000cc alum. paint cup.... $ 7.99 149390 (C) Pro 600cc plastic paint cup.... $ 3.99 149391 Pro 2mm needle kit...................... $10.99 149392 Mini Pro spray gun........................$29.99 149393 Mini Pro 150cc st. steel cup.......... $ 4.99 149394 Mini Pro 120cc plastic cup............ $ 2.25 149395 Mini Pro 1.5mm needle kit............. $ 7.99

118

Quickly achieve an expert finish - with no brush marks - with the Spray Station 5000 high volume, low pressure (HVLP) sprayer. Designed for woodworkers and DIY enthusiasts, this professional unit is fitted with a powerful twostage turbine that supplies the gun with constant airflow, allowing the material to be distributed evenly despite varying viscosities. An adjustable aircap creates different spray patterns while maintaining minimal overspray. The Spray Station 5000 is ideal for use in the workshop or home – the lightweight unit has a long carry handle for easy mobility and provides storage for the gun, 13' air hose and 51/2' power cord. The metal spray gun is compatible with nearly all finishing materials and the 1 quart Teflon coated paint pot is easy to clean. Includes 2.0mm (latex) and 1.5mm (water or oil based stains, varnish, shellac) stainless steel needles and fluid tips, viscosity cup, spray gun cleaning kit and detailed instructions. 147650 .................................................... $339.99 148524 1.0mm needle kit..........................$49.99 148525 2.5mm needle kit..........................$49.99 148526 1 qt. replacement pot...................$39.99 Spray Gun Cleaning Kit is available separately. 147658 ....................................................... $14.99

Finishing: A To Z With Charles Neil DVD

This 10 DVD collection includes: Buildingto Finish-Sanding & Smoothing; Preparing to Color-Repairing Defects; C o l o r i n g Wo o d - D y e s and Stains; Controlling Color; Advanced Coloring Techniques; Spray Guns & Turbines; Spray Techniques; Spraying Top Coats; Hand Applied Finishes; Special Finishing Techniques. Over 13 hours total. 149067 DVD set....................................... $134.99

EARLEX Spray Station HV6900

Earlex HVLP systems combine extraordinary performance and value. The new HV6900 continues that tradition - a commercial grade system at a DIY price. Powered by a 3-stage 1100W Ametek Turbine rated at 5 psi and 71 cfm, this new Earlex has the muscle for big jobs and the finesse for small ones. No finishing job is too large or small. You’ll find yourself not only using it for all your finishing needs but you’ll also be painting with it as well. Features include 3 spray patterns - horizontal and vertical fans plus detail; “Push N’ Click” system to change patterns and an adjustable fan width from 1" to 12". Comes with a 2.0mm stainless steel needle, 13' air hose and a two- year manufacturer’s warranty. 149708 .................................................... $499.99 Accessories 148524 1.0mm needle kit.........................$49.99 149726 1.5mm needle kit.........................$49.99 148525 2.5mm needle kit.........................$49.99 148526 1 qt. replacement pot...................$39.99

It's all About Color With Charles Neil DVD

Sit back and learn as Charles takes you through the process of selecting, preparing and achieving the best possible color out of six of the most popular woods, Cherry, Oak, Maple, Walnut, Poplar, and Mahogany. Includes recipes for achieving color with waterbased dyes and stains and instruction on choosing secondary woods for projects that blend beautifully with the primary wood of choice. Run time is 6 hours. 151235 6 DVD set....................................... $79.95

Finishing Turntable Painter’s Pyramid

Save time by applying finish to an entire project (top, bottom and sides) without having to wait for the finish to dry. Painter’s Pyramids are made from non-stick material that is impermeable to paints and solvents with rounded tips that will not leave a mark on the wood or the previously applied finish. Simply apply finish, flip your workpiece and apply finish on the opposite side. Package of 10. 151238 .........................................................$5.99

Credit Card Orders: 800 225-1153

Finishing generally requires walking around your project, applying finish to each section as you go, which can open the door for opportunities to spill, drip or splatter finish. As much as we hate to admit it, each one of us has been there, done that! With the Finishing Turntable you will never have to make this admission again. Simply position your project on the rotating table and “spin” the piece as you finish. No walking means less opportunity to create a mess. A nice side benefit is the discrete positioning you can achieve with the turntable. Turn the table so that your finished surface aligns with a light source to better identify areas where you missed on your finishing first pass. 150649 .......................................................$39.99

Free Technical Advice: 800 535-4486

www.woodcraft.com


Hardware COUNT ON US FROM START TO FINISH TM

China Bristle Brushes Shop Pack Of 36

B A

Great brushes for applying glue, stains, or general shop use. Economical enough to throw out when you finish. The Shop Pack includes 12 each of 1", 11/2", and 2" brushes with unfinished wooden handles. 147276................................... $16.50

Star Wiping Washed Jersey Knit Rags

Combi-Cam

Standard 3/4 " cylinder lock for use on material up to 7/8" but instead of keys, uses a 3-number cam combination mechanism. Easy to install, easier to use and secure with over 1000 possible user settable combinations. Use on guns cases, RV’s, trailers and cabinets of all sorts. Includes 1 each of the following cams; 3/4" straight, 11/2" straight and 11/2" offset. 151131 chrome................... $15.99 151132 black....................... $15.99

Great for small jewelry boxes or humidors. Gold-plated hinge has 5/16" wide leaves with a 11/4" hinge pin and 111/16" leg. Mounting screws included, sold in pairs. 126965 ................................ $10.50

Box Side Rail Hinges

A great addition to our box and humidor hardware selection, these hinges are machined from thick solid brass, polished and coated with protective “gold-tinted” lacquer. This coating assures that your hinges will stay bright and beautiful for years to come. Side Rail Hinges are machined from 7/64" thick brass, are 5/16" wide and 11/2" long. These hinges stop at 95° and are designed for medium-duty applications. The Side Rail Hinges With Stays also stop at 95°, are machined from 5/ " brass, are 5/ " wide, 2" long and 64 16 let you use a heavier top. Both hinges mount with #2, 3/8" brass-plated steel screws (included) which are coated with the same finish as the hinges. Sold in pairs. Each Pair 126434 hinges..................... $36.99 126435 hinges w/stay..........$37.50

(A) Full Mortise Chest Lock. Mortise size is 5/16" W x 2" L x 15/8" D. Lock Plate is 3/8" x 31/8". Strike and escutcheon are brass plated. 130261 ................................$11.99 (B) Surface Mount Cabinet Lock. Overall size is 15/8" x 1" x 3/8". Brass plated, includes escutcheon. 130259 .................................. $6.99

Humidor/Jewelry Box Lock

This hands o m e lock set is made from a combination of brass and plated steel with gold plating. Its slim design and low profile is easily mortised into small boxes and chests. Escutcheon plate, lock bolt and key are also gold-plated. Escutcheon is 3/ "W x 2 9/ "L, body is 1/ "W x 13/ "L 8 16 4 4 x 11/8" deep. 125589 ................................ $42.99

A

Provide a touch of classic quality to any piece of furniture. Polished and lacquered finish. Supplied with dowel screw for secure, easy installation. Each

10+

02U21 3/8".... 5/16"...... $4.99..... $4.49 02U22 1/2".... 7/16".....$6.50..... $5.85 02U23 5/8"..... 1/2"......$6.99..... $6.30 02U24 3 /4"... 9/16"..... $7.99......$7.19

Combi-Bolt

Indoor or outdoor door bolt with a twist…a 4-number cam combination mechanism built right in. No keys to misplace! But, is it secure? You bet! User settable combination has over 10,000 possibilities. Perhaps best of all, this is the ultimate lock for keeping the “tykes” out of your shop, lawn shed or other potentially dangerous areas. Includes 6 mounting screws. For enhanced security, mount with bolts (not included). 151133 chrome (shown)..... $25.95 151134 black....................... $25.95

B

A

Small Box Locks

Perfect for jewelry and trinket boxes, the half-mortise design allows installation of locks into thinner stock. Case is brass with steel mechanism. Case A is 44mm long x 18mm wide x 5mm thick. Case B is 44mm long x 22mm wide by 7mm thick. Case C is 51mm long x 24mm wide by 7.5mm thick. Each lock includes catch plate and one brass key. Screws not included. Case Screw Size

27D41 27D42 27D43 130344 130393

A

A........... #1.............$12.99 B........... #2.............$11.99 C........... #2.............$12.99 extra key for (A, B) . $1.99 extra key for (C)....... $1.99

B

C

B

Ball Catches

(A) Bullet Catch. Light duty. Brassplated steel. Includes strike plate brad. Bag of 10. 27H37 1/4" diam....................... $9.99 (B) Adjustable Ball Catch. Medium to heavy duty. Solid brass extrusion. Two side screws set spring/ball tension on catch release. For straight-on or side latching. Screws included. 111/16"L x 5/ "W. Each 10+ Each 16 27H39 ....................$3.50........ $3.15

Solid Brass Wood Screws

Solid Brass Knobs

Diam. Height

Chest And Cabinet Locks

Economical Quadrant Hinge

The definition of a great wood working shop rag is one that is made from a soft and highly absorbent material. A soft, absorbent cloth not only attracts liquids, but also “releases” the liquid when needed. The releasing characteristic of a good shop rag is important when applying stains and finish. Wiping Washed Jersey Knit Rags are not cut up T-shirts, or cut up clothes of any kind, but were raised to be nothing but the finest shop rags. Star Wiping rags are made from a cotton blend - spun, woven, processed and boxed in the USA. Whether you are applying stain or finish, polishing, or wiping up coffee spilled on your workbench, you will be impressed with these shop rags. 152652 1 lb.......................... $6.99 150924 4.5 lbs................... $24.99 150925 8.5 lbs (shown)..... $34.99

C

High quality flathead slotted screws in boxes of 100. 16I35 No. 1 x 1/2".................... $7.99 16I11 No. 2 x 1/2".................... $7.99 16I26 No. 2 x 5/8".................... $7.99 16I12 No. 4 x 1/2".................... $7.99 16I27 No. 4 x 5/8"...................$9.99 16I13 No. 4 x 3/4"...................$9.99 16I28 No. 5 x 5/8"................. $11.99 16I14 No. 5 x 3/4"................. $11.99 16I29 No. 6 x 5/8".................$12.99 16I21 No. 6 x 3/4".................$12.99 16I22 No. 6 x 1"....................$13.99 16I30 No. 8 x 5/8".................$13.99 16I23 No. 8 x 3/4".................$16.99 16I24 No. 8 x 1".................... $17.99

D Antique Solid Brass Miniature Hardware

A select offering of Stanley National solid brass miniature hardware in an Antique Brass finish. Quality solid brass hardware antiqued for that muted, subdued look. Mounting hardware included. Hinges pair 3+ 150647 (A) 3/4" x 5/8" .$2.99. $2.69 150646 (B) 1" x 3/4".... $3.50 .$3.15 150645 (C) 11/2" x 7/8".$3.99. $3.59 Hasp 150536 (D) 5/8" x 17/8" (A, B)............. ...................... $2.99. $2.69 149752 5/8" x 17/8" bright brass ...... ...................... $3.99. $3.59

B

A

Chest Straps

Solid Brass, bright finish. Sold in pairs. Dimensions

Each

4+

127389 (A) 2" x 3/4"... $7.50 ....$6.75 Chest Corners. Solid Brass, bright finish. Sold in pairs. 127393 (B) 2" x 3/4".$13.50... $12.15

Helping You Make Wood Work ®

119


Hardware A

B

G

I

H

BRUSSO Small Box Hardware

Brusso Incorporated was originally founded by a custom cabinet and furniture maker who was frustrated with the low quality of hardware available. By designing and manufacturing a product that met his own expectations, all woodworkers benefited. Even though Brusso hardware is made by Nanz Custom Hardware in their New Jersey factory today, each piece is still precision machined and the high copper content, solid brass stock has that original Brusso luster. Only premium quality components like stainless steel hinge pins, balls and springs, are used in production. Traditional styling and elegant lines of each piece are designed with the discerning craftsman in mind. Like its predecessors, this new line of Brusso Small Box Hardware is made from the highest quality materials and is sure to please. Brusso Decorative Brass Small Box Feet The MC-444 has a leg with cove profile, straight collar, and pad foot, is pressure-fit and glued into place. Foot measures 1/2" in diameter and projects 15/ ". The mounting tenon is 3/ " in diameter. Sold 16 8 in packages of 4. 150792 (A).................................................$13.99 The JB-755 has a modern straight-sided disk and projecting brass dowel that is pressure-fit and glued into place. Foot measures 1" in diameter and projects 1/ ". The mounting tenon is 5/ " in diameter. 8 8 150793 (B).................................................. $17.99

Dimensions A

B

C

Dimensions A

B

C

D

Per Pair

16R49 . ... 21/2".....21/2".......11/16"..... 3/32".....$25.99 16R50 . ..... 3".........2"........... 7/8"....... 3/32"......$25.99 16R57 ..... 21/2".......2"........... 7/8"...........3/32"......$24.99 16R58 . ..... 2".........2"........... 7/8"....... 3/32"......$22.99 16R59 . ..... 2".......11/2".........5/8"........1/16"......$19.99 16R60 . ... 11/2".....11/2".........5/8"....... 1/16".....$16.99

120

Precision Knife Hinges. Straight hinges for overlay doors, offset L- hinges for flush-mounted doors. Use 5/16" wide hinges for small doors up to 12" x 24" and 3/8" hinges for medium doors up to 24" x 36". Screws included. Style

A Screw Size

Credit Card Orders: 800 225-1153

Brusso Small Box Brass Jewelry Hooks are pressure fitted and glued into place. Each package contains one hook. The MC-510 spinning hook has six radial arms and mounts on the upper surface of a cabinet’s interior. The overall diameter is 15/8" and projects 11/8". The mounting tenon is 3/8" in diameter. 150799 (H)................................................. $31.99 The MC-437 has a flattened dome face ringed by a band-shaped edge. Hook measures 3/8" in diameter and projects 5/16". Mounting tenon is 3/16" in diameter. 150800 (I)......................................................$4.99 Brusso Small Box Brass Quadrant Hinge The HD-638 is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is mortised into the side of the box, beneath the leaf. Each leaf measures 1" x 1". Sold in pairs. 150801 (J)....................................................$40.99 Brusso Small Box Brass Bullet Catch The BC-265 mortised ball catch, consists of a brass cylinder with spring-loaded steel ball and a brass keeper and is used to secure cabinet doors. The grooved sides of each half measure 11/32" in diameter, and provide both a “grip” when mounted and a reservoir for glue. Package contains 1 catch. 150802 (K)..................................................... $9.50

BRUSSO Precision Hardware

A

Per Pair

(A) Box Hinges. 16Q11 ............. 1".............. 5/8"............ 1/4"............ 1/16"............ #1............$14.99 16Q21 ........... 11/2"............ 3/4"............5/16"............ 1/16"............ #2............$14.99 (A) Broad Cabinet Hinges. 16Q22 . ......... 11/2"............ 7/8"............. 3/8"............5/64"............ #4............$15.99 16Q32 . ........... 2"............. 11/8"........... 7/16"............3/32"............ #4............$15.99 16Q41 ........... 21/2"........... 13/8"........... 1/2"............3/32"............ #6............ $17.99 (A) Full-Size Cabinet Hinges. 16Q42 . ........... 2"............. 11/4"........... 1/2"............3/32"............ #6............$21.99 16Q51 ...........21/2".......... 11/2"........... 5/8"............ 7/64"............ #8............ $27.99 16Q52 . ........... 3"............. 17/8"............ 3/4"............ 7/64"............ #8............$31.99 (B) Back Flap Hinges. 16Q61 ........... 11/4"........... 17/8"........... 13/16"...........5/64"............ #6............$19.99 16Q62 . ......... 11/2"...........23/8"..........11/16"...........3/32"............ #6............$19.99 16R12 ............. 2"............... 3"............ 13/8"........... 1/8"............. #8............$35.99 (A) Polished Cabinet Hinges. Complete with screws.

K

The HD-702 has a square base with a radius, inner corner and an inset block foot. The base is mortised into the bottom of the box and fastened with two screws. Foot measures 7/8" x 7/8" with an overall thickness of 1/4". 150794 (C)...................................................$20.99 The JB-426 features a compressed sphere and spacing collar with a turned profile that is pressure-fit and glued into place. Foot measures 3/4" in diameter and projects 9/16". The mounting tenon is 1/2" in diameter. 150795 (D)...................................................$25.99 Brusso Small Box Decorative Brass Knobs feature a flattened dome face, ringed by a band-shaped edge. Knobs are pressure fit and glued into place. Package contains one knob. The MC-422 measures 5/16" in diameter and projects 5/ ". Mounting tenon is 3/ " diameter. 16 16 150796 (E).....................................................$3.99 The MC-428 measures 3/8" in diameter and projects 7/ ". The mounting tenon is 3/ " diameter. 16 16 150797 (F).....................................................$4.50 The MC-432 measures 1/2" in diameter and projects 9/ ". The mounting tenon is 5/ " diameter. 16 16 150798 (G).....................................................$5.50

B

D

F

J

Drawn Brass Cabinet Hinges

Custom designed cabinetry naturally deserves the finest solid brass hinges. Our brass hinges are individually machined to provide smooth operation. Mounting screws not included. Brushed Satin Finish. Hole patterns on Back Flap hinges vary by hinge size.

E

D

C

WxL

Per Pair

145288 knife 5/16" x 15/16"............................ $15.50 145289 knife 3/8" x 13/4"...................... $19.50 145290 offset 5/16" x 13/8"..................... $23.50 145291 offset 3/8" x 13/4"...................... $28.50 Precision Box Hinges feature rectangular knuckles which stop the lid in a vertical position so it won’t drop back. Hinge pins are precision-ground tool steel, with pin boxes that are first drilled, then reamed, for stain smooth fit and operation. Use in boxes of all types and small doors where the opening angle won’t exceed 100 degrees. Screws included. L x W Closed

145286 145287

Min. Stock Thickness

Leaf Thickness

Per Pair

3/ " x 1/ "................ 5/ "..................3/ ".............................$22.99 4 2 16 32 11/4" x 5/8"................7/16"...................3/32".............................$29.99

Jewelry Box Feet are the finishing touch on a finely crafted box. Install by gluing feet into a 5/ " diameter hole, 1/ " deep. Feet measure 9/ " 16 4 16 total height, exposed foot height 3/8". Solid brass. 145296 set of 4....................................$12.50

Brass Bullet Catches

Bullet Catches gently hold cabinet doors shut. Spring loaded balls align and index on strike plates. Light and medium duty. Milled from solid brass with stainless steel ball. Install easily. Sold individually. Size

Each

145292 1/4" dia., light duty................................... $7.50 145293 7/16" dia., med. duty ............................ $11.50

Free Technical Advice: 800 535-4486

www.woodcraft.com


Hardware Minaret Tips

Ball Tips

A

L x W Open Screw Size Per Pair

16R41 21/8" x 11/4"....No. 6....$29.50 16R42 27/8" x 11/2"....No. 6.... $27.99

L x W Open Screw Size Per Pair

130634 (C) 23/4" x 13/16".#6...$11.99 130635 (D) 3" x 1/2"........ #6......$7.99

Miniature Barrel Hinges

Make your own pen, pencil, or other small cases or boxes with these miniature barrel hinges! Precision 5mm diameter hinges are made from solid brass and feature smooth operating, finely machined mechanisms. Bags of 10. 06R91 ...................................$7.99 5mm Brad-Point Bit 146614 .................................. $2.99

Add a touch of elegance to your next box project with these unique solid brass hinges. Formed from heavy brass stock that is polished then lacquered, these definitely are eye-catching. Measuring 35mm in diameter, they are designed to drop tightly into a 35mm Forstner bit hole, but can also be surface mounted. Includes a pair of removable stops which, when mounted on the hinge, limit the opening to about 95°. Includes six oval head screws (two are 5/8" long to accommodate the extra thickness of the removable stops). Leaf thickness is .09". Sold in pairs. 129713 ................................$42.99 142511 35mm Forstner bit .$21.99

124232 124234 124236 124238 124240 124242 124244 130191 130195 130192 130196

124231 124233 124235 124237 124239 124241 124243 124245 130193 130197 130194 130198

Easy hinges to install – just drill the proper size hole, tap the hinge in flush and tighten the locking setscrew to expand the body of the hinge tightly in the hole. Solid brass with brass plated steel linkage. 180° opening. Non-Mortise Hinge for panels 1/2" thick. Requires 10mm mounting hole. 27C11 ............................ ea. $5.99 Non-Mortise Hinge for panels 3/4" thick. Requires 14mm mounting hole. 27C12 ............................ ea. $6.99

These inexpensive box hinges are easy to install. Just cut a slot with the appropriate thin kerf blade on a drill press and push the barbed hinge in the kerfed slot. What could be easier! The result is a nearly invisible hinge. 11/8" hinge uses .036" blade, smaller hinge uses .025" blade. Arbor has a 1/2" shank. Hinge

Per Pair

141588 11/8" x 7/8".................. $2.50 141589 7/8" x 9/16"................... $2.50 Saw Blades 141591 .025" kerf................$22.99 141592 .036" kerf................$22.99 141590 saw blade arbor.....$26.99

Drop-Leaf Hinges

Specifically designed for use in the

construction of drop-leaf or harvest tables. Hinge measures 11/2" wide x 31/8" length open. Plain steel with 5/8" screws included. 10+  27I25 .................pr. $5.50..... $4.95

D En ark gli sh Partial Wrap

Each

10+ Each

solid brass - minaret.......................... $7.50........ $6.75 solid brass - ball................................. $7.50........ $6.75 polished brass - minaret....................$4.50........$4.05 polished brass - ball...........................$4.50........$4.05 antique - minaret................................$4.50........$4.05 antique - ball.......................................$4.50........$4.05 nickel - minaret...................................$4.50........$4.05 nickel - ball..........................................$4.50........$4.05 pewter - ball........................................$4.50........$4.05 pewter - minaret.................................$4.50........$4.05 dark english - ball...............................$4.50........$4.05 dark english - minaret........................$4.50........$4.05

A

Barbed Hinges Non-Mortise Invisible Hinges

Full Wrap

Amerock hinges are as strong as Application Application they are beautiful. They’ll give you the close-fitting decorative look of a traditional inset-style door without the hassles and confusion of mortising the door or door frame. These full-inset hinges feature both minaret and ball tip styles and come in six popular finishes, Sterling Nickel, Antique English, Polished Brass (plated steel), Solid Brass, Pewter and Dark English. Full-wrap hinges are perfect for face frames while the partial wrap style is best used on frameless cabinets. Hinges accommodate a 3/4" thick door with a door gap as small as 1/16". Other features include an exclusive pin treatment for silent reliable performance, horizontal and vertical adjustments and on the full wrap hinges, an angled set hole for quick, easy installation. The ultimate in professional cabinetry hardware. Sold individually, with screws. Full Wrap Partial Wrap

Round Hinges With Stops

An En tiqu gli e sh

AMEROCK Full-Inset Cabinet Hinges

S Br olid as s

L x W Open Screw SizePer Pair

130632 (A) 3" x 11/2"... #6...$15.99 130633 (B) 21/2" x 11/2".#5 .$15.99 Solid Brass Table Hinges. Pair of solid brass hinges. Opens 180°, closes flush. Satin brass finish. Screws not included.

Po l Br ishe as d s

Designed specifically for drop-leaf tables with rule joints. Extra-wide plates clear the hollows over the rounds on the molded-edge joints when the leaves are moved up into position. Drawn brass hinges are manufactured with brass pins. Screws not included.

S Ni terlin ck g el

Table Hinges

Solid Brass Butler Tray Hinges lock in their flat position and hold vertical at 90° with a snap. Matte brass finish, screws not included.

Pe wt

Table Hinge Installation

er

B C D Butler’s Tray and Table Hinges

B

C

Non-Mortise Hinges

(A) Cabinet Hinges. Requires no cutting of butt mortises, just screw hinge to door and jamb. Heavy-gauge steel with statuary bronze finish. Sold in pairs with mounting screws.

SOSS “Invisible” Hinges

Ideal when a flush, smooth surface with no visible hinge is required. Hinges are brass-finished zinc, open a full 180°, and have a laminated link construction that reduces friction for smooth operation. Installation instructions and mounting screws included. For light load-bearing applications. Invisible Hinge for wood 3/4" or thicker. Use larger hinge for longer, wider applications. W x L of Plates

Per Pair

06B44 1/2" x 13/4"................$23.19 140472 1/2" x 23/8"............... $25.29 Invisible Hinge for wood 1/2" to 5/8" thick. Smaller hinge is perfect for boxes and small cabinets; larger hinge for all other applications. 03H33 3/8" x 1"....................$23.19 140471 3/8"x 111/16"..............$25.29

W x L Closed

Each Pair

27G11 5/8" x 15/8"................. $1.99 27G12 11/16" x 2".................. $1.99 27G13 13/16" x 27/16"............. $1.99 27G14 1" x 3"....................... $3.50 (B) Cabinet Hinges With Finials in hand-rubbed brass, antique brass or silver finish. Sold in pairs with mounting screws. Size Finish Per Pair 130552 7/8" x 2".........HRB.... $4.99 130549 1" x 21/2"......HRB.... $4.99 130551 7/8" x 2".......... AB..... $5.50 130548 1" x 21/2"....... AB..... $5.50 130553 7/8" x 2"............S...... $5.50 130550 1" x 21/2".........S...... $5.50 (C) Double-Action Hinges.For 3/4" or 11/8" thick panels, swings either direction. Polished brass or statuary bronze finish, includes mounting screws. Panel Finish Per Pair

10+ 

27G33 3/4".......PB......$4.99.... $4.50 27G34 11/8".....PB......$4.99.... $4.50 27G31 3/4".......SB......$4.99.... $4.50

Helping You Make Wood Work ®

121


Hardware A

A DANCO Clip-On Hinges

This European style clip-on hinge incorporates 3-way adjustment, allowing fast and precise corrections of assembly or installation inaccuracies.

Adjustments are integrated into the hinge and base plate. Nickel plated; self closing. Sold in pairs with screws and instructions. Per Pair 6+ 147573 (A) 110° full overlay............. ...................$6.99...... $6.29 147574 110° half overlay................. . .................$6.99...... $6.29 147575 110° inset. $6.99...... $6.29 147576 165° full overlay.................. ................$13.50....$12.15 3-way adjustment integrated into the hinge and plate. Sold in pairs with screws and instructions. Per Pair

A DANCO Face Frame Hinges

A

6+

147569 .110° full overlay................. .................. $7.99.......$7.19 147570 (A) 110° half overlay.......... .................. $7.99.......$7.19

The Face Frame series has complete

BLUM Face Frame Hinges

Produce the “European Look” with traditional face frame cabinets. Hinges open to 110° and are available for both face or edge mounting. Packaged in pairs with screws and instructions. Per Pair

02R80 02R85 02R90 142511

6+

face mount .$6.99... $6.29 1/ " overlay...$6.99... $6.29 2 3/ " overlay...$6.99... $6.29 4 35mm carbide bit...$21.99

BLUM Compact Face Frame Hinges

Blum’s 38N series Compact Hinges are specifically designed for face frame cabinetry and provide all of the advantages that come with concealed hinges. The Compact 38N is the highest quality face frame hinge for small overlays. Its integrated cam depth adjustment, along with its proven side and height adjustment, enable a quick and simple 3-dimensional door adjustment. All hinges are equipped with a self-closing mechanism which guarantees that the door will close securely. We offer both a Wrap Mount and an Edge Mount design. Packaged in pairs with screws and instructions.

A

BLUM Clip Top Inset Hinges BLUM Clip Top Hinges

120° Full 120° Half With Cam Plate Technology and Spiral Tech Adjustment The best just got better. Removable hinge technology combined with single screw plate and hinge adjustment make these the most advanced hinges on the market today. Now with the turn of a fixed screw you can move the Cam Action Hinge Plate up and down for precise door adjustment in the carcass. Also, with the door attached to the hinge plate, through “Spiral-Tech” depth adjustment you can move the door in or out of the carcass for perfect alignment. Other features include a flange around the perimeter of the cup for added strength and a closed cup, so you don’t see the core material of the door. Sold in pairs with screws and instructions. Per Pair 6+ 142852 120° full... $10.99....$9.89 142853 120° half .$10.99....$9.89 142854 170° full.... $16.99 .$15.30 142855 170° half . $18.99 .$17.09 142511 35mm carbide bit .$21.99

A

B

Per Pair

146560 146561 146562

1/­ " 2 3/ " 4 1/ " 2

overlay wrap..... $5.99 overlay wrap..... $5.99 overlay edge..... $5.99

Flush Rings

Solid Brass, bright finish. Dimensions

A

Period Escutcheons

Solid brass with keyhole. 3" x Finish

Each

17/8".

Each

127384 .(A) 11/2"dia...............$14.99 127385.(A) 2" dia...................$20.99 127386 .(B) 11/2" x 11/4"..........$17.99 127387 .(B) 21/2" x 2".............$23.50

B

A

Chest Handles

B

Finish Overall Each

127362 127364 127363 127365

4+

bright .3" $14.99. $13.49 bright .4" $16.99 .$15.29 ant...... 3" $15.99 .$14.39 ant...... 4" $21.99 .$19.79

Solid brass, sandcast with bright finish. Light-duty handle - 31/2" bail; heavy-duty handle – 41/2" bail. Handles may be used for lifting. Exercise care as weight rating is dependent on wood used. Each

Solid Brass Escutcheon Pins

Sold in 2 oz packages. 150532 1" x 16 gauge........... $3.50 150533 1/2" x 18 gauge......... $3.50 150535 5/8" x 18 gauge......... $3.50 150534 3/4" x 18 gauge......... $3.50

122

4+

127398 (A) lght.-duty.$14.99 .$13.49 127399 (B) hvy.-duty.$29.99 .$26.99

Credit Card Orders: 800 225-1153

Per Pair

6+

142856 (A) .......... $16.99...$15.29 131236 (B)........... $16.99...$15.29

EZ-Mount Hinges

The EZ-Mount soft close A hinge is the most technologically advanced, hydraulically dampened Euro-style cabinet hinge on the market B today. The hinge is a self closing, dampened hinge that closes softly, cannot be slammed and holds the door closed yet is easy to open too. C E-Z Mount’s patented hydraulic cylinder and seal technology; double wall construction; multi plate connecting D arm and unique 4 hole mounting plate ensures it will stay where you put it and operate flawlessly. The EZ-Mount Hinge is suited for frameless kitchen cabinets, bathroom vanities, furniture, entertainment centers, and custom cabinetry. For fast, easy cabinet door installation we recommend the EZ-Mount hinge jigs sold separately, in pairs below. Choose for full, half, or inset applications, sold 1 per bag with mounting screws. 1-5

12-35

36+

845846 (A) full overlay..................... .... $5.99.... $5.39... $4.85 845847 (B) half overlay................... .... $5.99.... $5.39... $4.85 845848 (C) inset............................... .... $5.99.... $5.39... $4.85 150923 (D) E-Z Mount hinge jigs . ... (2)............................. $19.99

4+

Solid brass, matches escutcheon design above. Bright or Antique finish. The 4" handles have a 3" bore, the 3" have a 23/32" bore.

Blum’s newest clip top inset hinges make it possible to use inset doors on both face frame and frameless construction. Frameless mounting plate features easy up and down adjustment. Face frame mounting plate screws securely to the inside of the face frame so that even beaded rails or beaded doors can be utilized. New Top Clip Hinge features single screw adjustment that positions door in and out for precise alignment. Use (A) for face frames and (B) for frameless applications. Sold in pairs with screws and instructions.

127360 bright......... $10.99.....$9.89 127361 antique...... $10.99.....$9.89

Period Handles

B

Chest Handles

Solid brass, sandcast with bright finish. Small handle 31/2" x 2". Large handle 41/4" x 13/4". Handles are decorative pull handles not to be used for lifting. Each

4+

127382 (A) sm......$25.99....$23.39 127383 (B) lg........$23.99....$21.59

Free Technical Advice: 800 535-4486

Period Swan Neck Pull

Solid brass, sandcast with bright finish. Boring

Each

127351 3"..........................$14.99 127352 31/2"........................$14.99 127353 4"..........................$19.50

www.woodcraft.com


Hardware

Pre-Cut Drawer Sides

Hardwood Table Slides

Making drawers? Take a tip from the pros and use these pre-cut components to cut your project construction time and quite possibly save a few dollars as well. Our drawer sides are pre-finished and have a rounded top that provides a decorative edge. Both are 1/ " thick, slotted 1/ " for the drawer bottom and 2 4 60" in length. Height

146705 146706

Length

Each

Provide natural strength and smooth extending action for two-part tables. Hardwood slides feature dovetailed tracks and sag-proof shaping. Slides are 23/8" deep. Pre-bored for #10 or #12 screws. Standard Slides for square end tables (Parsons) up to 60" when closed. Slides are 46" long closed. Opens 36" for leaves, one pair. 27N22 ............................ pr. $54.99

6+

4"........... 60"............ $9.99........$8.99 6"........... 60"..........$13.99......$12.59

Align-N-Lock

Is a new innovation in tabletop hardware that provides two functions in one piece of hardware. It accurately aligns the two sections of the tabletop and provides a secure locking mechanism as well. Plated steel. Screws not included. 124295............................... ea. $3.50

A Heavy-Duty Leg Levelers

B A Tabletop Fasteners & Pins

Tabletop Fasteners attach tops to aprons to allow for seasonal wood movement. When screwed to the bottom of the tabl top, these fasteners clip into a 3/32" (one saw kerf) slot in the apron. Screws not included. Bag of 10

27N10 (A) ........................ ea. $1.99 Table Pins align and hold your table leaves in position. Brass-plated steel pins press fit into an 8mm hole. Bag of 10 10+ Bags

27A30 (B) . ......... $5.99 . ...... $5.40 146617 8mm brad point bit .$4.99

No-Mortise Bed Rail Fittings

Yo u ’ l l f i n d dozens of applications where these no-mortise bed rail fittings will come in handy. Made of heavy-gauge steel with a rustproof, chromate plating, they measure app. 3" tall and use a #10 screw for mounting (not included). “L” bracket mounts to the post of the bed and the plate mounts to the bed rail. Set of four includes two rights and two lefts. 142496 set of 4.................... $11.99

A

B

Banquet Folding Legs And Folding Bench Legs

What a great way to add more table space for that next family reunion. Legs are constructed of heavy-duty 1" tubular steel with welded joints. Banquet legs lock open or fold flat for easy storage. Folding Bench Legs feature a wide base for secure mounting and fold flat. Sold in pairs, black. (A) Banquet Legs Pair 3+ Pair 813802 ...............$28.99...... $26.09 (B) Bench Legs 813803 ...............$25.99..... $23.39

Threaded Inserts

Solid brass fasteners for joining wood, chipboard, and plywood; especially useful in knockdown furniture. Simply drill a pilot hole, thread in the insert with a screwdriver or "T" wrench, then use a machine screw or bolt to attach the other part. Packs of 10. Pilot Length Hole

Bed Bolt Cover And Bolt

Traditional bolt cover in Sheraton styles with a brass finish. Square head, 3/ " x 6" long rigid steel bolts provide 8 extraordinary structural support. Bolts are complete with nut and washer. 130213 13/4" dia. cover........... $7.50 130211 6" bolt........................ $6.99

Thread Size  Pack of 10

12J20 3/8"..... 1/4"......6-32 . ... $3.50 12K40 3/8"... 1/4"..... 8-32...... $3.50 12K10 1/2"... 3/8".... 10-24..... $3.50 12K50 1/2"... 3/8".... 1/4"-20.... $5.99 12K60 9/16"... 1/2"... 5/16"-18.... $6.99 11M40 9/16"... 1/2".... 3/8"-16..... $7.50 11M30 9/16"... 1/2".... 3/8"-24..... $7.50 "T" Wrenches. Install threaded inserts straight and easy without damaging wood. 12J15 6-32 . ........................ $4.99 12K45 8-32 . ........................ $4.99 12K15 10-24 . ...................... $4.99 12K55 1/4"-20 ...................... $4.99 12K65 5/16"-18 ..................... $4.99 12F33 3/8"-16 . ..................... $4.99 12F23 3/8"-24 ...................... $4.99

Pedestal Slides for round or oval 4 leg or split pedestal tables up to 48" long. Opens 36" for leaves. Slides are 24" closed. One pair. 27N21 ...............................pr. $44.99

Perfect for cabinets, tables, or shelving units, these levelers feature a lipped mounting bracket that works to lift, support and create more stability. Small foot leveler, 15/16" diameter, comes in a set of 4 and has a pivoting steel base with plastic protective cap. Wide foot leveler, 23/8" diameter, is sold individually. Both are made of heavy-gauge, plated steel and use a #5 hex wrench for adjustment. 145840 small foot (4)........... $17.99 Each

4+

142498 wide foot (1) .$6.99 $6.30

A

C

B

Cabinet And Furniture Levelers 3/ "-16 8

TPI x 31/2" long stems are installed in base units and easily adjusted with a screwdriver from the top or a wrench at the hex nut bottom. Glides have a 11/2" diameter, no-mar nylon swivel/tilting pad. Screws not included. Packs of 4. (A) Corner Bracket Levelers provide cabinet frame support. Each Pack 10 + Packs

27P10 . ............. $9.75.............$8.77 (B) T-Nut Levelers. Easy installation, bore a 1/2" dia. hole and hammer in the T-nut. 27P20 . ..............$6.99........... $6.29 (C) U-Bracket Levelers for maximum strength on extra-heavy pieces. 27P30 . ........... $14.50......... $13.05

B Table Leg Corner Braces

For an economical attachment of table legs to frames. Ends of the brace are set into grooves in the frame. Hanger bolts (listed below) then attach leg to brace. Heavy galvanized steel. 11/2" x 4". Mounting screws not included. Each

10+ 

27A31 (A).............. $1.50 ....... $1.35 Hanger Bolts (B) 5/ " steel bolt has wood threads on 16 one end and 18 TPI machine threads on the other. Use a 9/32" pilot for softwood or 19/64" bit for hardwood. Packs of 10. Each 10+ 130237 2"............$1.99 ........$1.79 130238 21 /2".......$1.99 ........$1.79 130239 3"............$2.50......... $2.25

Bed Rail Fastener

Attach rails to posts or use in other K-D furniture applications. Requires full mortise installation. Made of heavy gauge, 5/ " wide steel. Fasten8 ers are 5" long, sold in sets of 4. Mounting screws not included. 127456 ................................$11.50

Bed Rail Bracket Set

This bed rail bracket set is like no other we’ve ever seen. The user friendly surface mount bracket is manufactured from heavy gauge stamped steel and the mating pieces slide together and tighten down with an integral bolt to create an extremely secure bed frame joint. Best of all, the interior attachment is hidden from view. Each joint requires 8 mounting screws (32 screws total) and we recommend #8 x 5/8" screws as a minimum, while thicker boards can support longer screws. Each set contains 4 pair of brackets – enough for one bed. Screws sold separately. 151045..................................... $9.99

Helping You Make Wood Work ®

123


Hardware B A Glass Retainer Clips

(A) Thumbscrew Retainer. Firmly holds glass panels in wood frame doors. Thumbscrew adjusts to various door or glass thicknesses. Surface mount on inside of door. Bronze finished steel with mounting screw and plastic tip. Bag of 10 10+ Bags 27A15......................$4.99....... $4.50 (B) Plastic Retainers. Soft plastic retainers hold glass firmly in place. Available in 1/8" or 3/16" offset. 1/ " Offset Bag of 10 10+ Bags 8 130329 clear.........$3.50........ $3.15 130330 brown.......$3.50........ $3.15 3/ " Offset Bag of 10 10+ Bags 16 130327 clear........ $3.50 ...... $3.15 130328 brown...... $3.50 ...... $3.15

A

C

B

D

E

F

Door Bumpers Soften impact and

Space BallsTM

Used with flat-head screws to join two s u r f a c e s t o g e t h e r. The tapered plate ensures a snug friction fit. Single hole is 5/8" x 1 5/8 ", double hole is 1/ " x 3". Two per pack. 2

Shank Dia.

Bag of 25

brass 1/4".................. $3.99 brass 5mm................ $3.99 nickle 1/4".................. $3.99 bronze 1/4".................. $3.99

(E) Bracket Style. With hole. 27I17 brass 1/4".................. $6.99 27I18 nickle 1/4"..................$5.50 27I19 bronze 1/4"..................$5.50 (F) Bracket Style Glass Shelf Support. Brass with brown sleeve. 27I20 brass 1/4".................. $3.99

Heavy-Duty Swivels

Designed for barstools, swivel chairs, television turntables and can be used as giant lazy susans. Heavy 12-gauge

124

Spring-loaded and easy to mount on the inside of the lid and box. Touchcontrol cam action keeps lid open and steady; no fear of it banging down unexpect- Mounts edly on small Left, hands. Great Right or for toy chests Center and other drop lid pieces like hope chests, window seats, storage chests, and stereo cabinets. Available in 3 sizes for different lid weights, listed here in inch-pounds. (Note: to find inch-pound (IP) for a lid, multiply 1/2 the distance from front to back by the weight.) Designed for mounting on the left or right of the case, either may also be center mounted. Statuary bronze finish, screws included. Left 04X21 35-45 IP lids................ $5.99 04X61 45-55 IP lids................ $5.99 04Y31 95-125 IP lids.............. $5.99 Right 04X12 35-45 IP lids................ $5.99 04X13 45-55 IP lids................ $5.99 04X15 95-125 IP lids.............. $5.99 steel plates run smoothly on a full ball-bearing race. Mounting slots on corners (51/4" center-to-center) accept round head screws or bolts. Use the 3-degree swivel on chairs or stools designed with a slight backward tilt. The return swivel keeps barstool backs neatly aligned when not in use. Overall size 7" x 7". Swivel Style

Each

03M51 flat, 1" thick............... $9.99 03M52 3°, 17/8" thick......... $10.99 03M53 return, 11/16" thick .$19.50

Credit Card Orders: 800 225-1153

Cedar Chest/Toolbox Hinge And Lid Support

These hinges are easy to install and very effective as both a hinge and support on cedar chests, toolboxes or trunks. Mounts to the side of the chest and the underside of the top. Brass-plated steel construction. Sold in pairs with mounting screws. Per Pair

141533 brass....................................................$24.99

C

B

Self-Balancing Lid Supports

27I14 27I33 27I15 27I16

3+ 

02S81 . ....................$7.99......$7.19 Large 7/16" dia. x 1/8" thick. Sheet of 56. 02S82 . ................. $8.50......$7.65

B

125505 single hole....$1.25 .$1.13 125506 double hole..$1.99 .$1.79

We offer a variety of styles and finishes to fit every shelving need. Bags of 25 each. (A) Clear Bracket Style 27I31 clear, 5mm................. $3.50 (B) 5mm Round Shelf Supports. Insert in 5mm hole, project 15mm (5/8") into case. Bag of 20 5+ Bags 130339 nickel......... $4.99..... $4.49 130340 brass......... $4.99..... $4.49 (C) Flat Spoon Style 27I11 brass 1/4".................. $2.99 27I32 brass 5mm................ $2.99 27I12 nickle 1/4".................. $2.99 27I13 bronze 1/4".................. $2.99 (D) Bracket Style

Each Sheet

A

Keyhole Hangers

Each Pack 10+

Shelf Pins And Supports

noise from cabinet doors. Clear with adhesive back. Small 5/16" dia. x 1/16" thick. Sheet of 75.

These simple, yet effective objects center solid panels, then compress as the panel expands. They stop panel rattle and help eliminate cracking glue joints. Space Balls are 0.26" in diameter tomatch the cut of standard stile and rail bits. 8-10 Space Balls recommended per door, 100 per package. 142284 ................................. $5.99

Friction Lid Supports

These curved friction lids supports are bright brass finish steel, designed to support lids on shallow depth boxes and chests at least 21/2" deep. Available in either left or right mount, with adjustable tension to hold a lid in any position. Each 3+ 149757 (A) left hand mount .......... ................$6.99.......$6.29 149758 (B) right hand mount......... ................$6.99.......$6.29

(A) Connector Bolts. Use with cross dowels, connector nuts, or any common 1/4"-20 nut. Steel bolts feature 11/ " diameter, bevel-edged heads for 16 extra surface support and low-profile design. Black oxide finish. Requires metric M4 hex wrench for installation. Available in 3 lengths for different stock thicknesses. Packs of 10. Length

Pack of 10

Pack of 10

Securely lock themselves in position when raised! Attach to the wall or any vertical surface where a temporary shelf is needed. Rated for 130 lbs./pr. White enamel finish, sold in pairs. Per Pair

Knock-Down Hardware

06M40 . ... 11/8"........................ $3.99 06K80 . ..... 2".......................... $4.50 06K90 . ..... 3".......................... $4.50 06K4A .M4 hex key...............ea. $.75 (B) Cross Dowels. Barrel nuts are solid steel, 16mm long (.630") x 10mm diameter (.393") with slotted end for in-hole alignment 1/4"-20 threaded hole is off-center. For use in 5/8" and thicker stock. Packs of 10.

Folding Shelf Brackets

Shelf Width

A

10+ Pair

128943 8" . ...... $12.99 .....$11.69 128944 12"....... $14.99 ..... $13.49

06K70 . .................................. $2.99 (C) Cap Nuts. Mounts on bolts for clean board-to-board joining of shelves and cabinet sides. Same head design as our bolts. 1/4"-20 internal thread. 5/8"L x 3/8" dia. body. Requires M5 hex key. Packs of 10. Pack of 10 06M50 . .................................. $3.99 06K3A M5 hex key............ ea. $.75 them for revolving shelves in kitchen cabinets, planters, serving platters at the table, even large tabletops. 3" - 12" sizes are zinc-plated to guard against rust. The 175/16" unit is ideal for your largest revolving surfaces. It has a full 160 ball race captured in a durable ABS plastic housing for whisper-quiet operation and mar-free rubber feet to prevent slipping. 3" - 6" sizes are square, 9" - 175/16" are round. Capacity/ Size Pounds Thickness Each

Lazy Susan Bearings

Each durable interlocked lazy Susan unit glides smoothly on 1/4" ball bearings and maintains maximum stability, even under heavy loads. Use

Free Technical Advice: 800 535-4486

02Z21......3"........200 .... 5/16".... $1.99 02Z31......4"....... 300..... 5/16".... $2.50 02Z41......6"....... 500..... 5/16".... $3.50 124300....9"........750..... 5/16".... $4.99 02Z51..... 12"..... 1000.... 5/16".... $7.99 27A04 .17 5/16"....220.....13/16".$54.99

www.woodcraft.com


Hardware

ACCURIDE Slides - The Professional Cabinetmakers Choice

Why? Because of their high quality, dependability and versatility. The smooth, quiet movement of a drawer installed with an Accuride suspension system is irresistible. Once you have experienced it, you'll insist on Accuride for all your furniture and cabinet designs. All metal with prelubricated ball bearings, they are available in bright chrome, white epoxy and contemporary black zinc finishes. All slides are packaged with mounting instructions and screws.

ACCURIDE 2132 3/ Extension Low Profile Drawer Slides 4

13/8"

Pair

5+ Pair

10"......... $10.99....... $9.89 12"......... $10.99....... $9.89 14".........$11.50..... $10.35 16".........$11.99..... $10.79 18".........$12.99.....$11.69 20"......... $13.99.....$12.59 22"......... $14.99.....$13.49 24"......... $16.99.....$15.29

1/ " 2

Pair

5+ Pair

130595 26"..........$17.99.....$16.19 150183 28".........$18.99......$17.09 Face Frame/Rear Bracket Kit Converts standard 2132 slides into face frame slides. Includes 2 front, 2 rear brackets. Rear Bracket has 2" (50.8) adjustment range. With Instr. 150239.................................... $4.25

ACCURIDE 3732

"

Full Extension Drawer Slides with a lower profile, only 1/2" wide and 11/2" tall, rated at 100 lbs per pair for light to medium applications. Features a front face-mounting hole for face frame applications, easy and simple unhanded disconnect to remove drawer from the cabinet and moves on silent-rolling acetal polymer ball bearings. These slides are a great choice when upgrading from 3/4 extension slides.

"

Clear Zinc Finish Pair 5+ Pair 131195 12" ........................................................................$14.99....... $13.49 131196 14"..........................................................................$15.99....... $14.39 131197 16"..........................................................................$16.50....... $14.85 131198 18".........................................................................$16.99....... $15.29 131199 20"......................................................................... $17.50........ $15.75 131200 22".........................................................................$18.99........$17.09 131235 24"..........................................................................$19.50........$17.55 131201 26".........................................................................$19.99........$17.99 131291 face frame hardware kit/3732.............................. $3.99

ACCURIDE 9301 Heavy Duty Slides

Designed for large pantry pull-outs, vehicular storage and wide, heavy drawers. Full extension slide for drawers and pull outs up to 32" wide. Features both side and flat mount option. Load rating depends on mounting option per pair: 150 lbs. flat mount; 300 lbs. side mount (mobile); 400 lbs. side mount (frequent usage) and 500 lbs. side mount (moderate usage).

150225 150226 150227 150228 150229 150230 150231 150232 150233

Each

5+

16"........................................................................$104.99.........$94.49 20"........................................................................$119.99.......$107.99 22"........................................................................$139.99...... $125.99 24"........................................................................$144.99...... $130.49 28"........................................................................ $147.99...... $133.19 34"........................................................................$189.99.......$170.99 36"........................................................................$199.99.......$179.99 48"........................................................................$299.99...... $269.99 60"........................................................................$399.99...... $359.99

ACCURIDE 9301 Bracket Kits

The only slide of its kind that is designed to close drawers completely and keep them closed. Perfect for a variety of needs including mobile applications and frequently used custom cabinetry to casework and furniture. Contains all of the same features of the standard 3832 series slides plus the self-close, stay-close mechanism. Slides are full extension with a 100 pound load rating. Sold in pairs. Black Finish Standard Clear Zinc Pair

These all steel ball bearing slides are an economical, lower load capacity alternative to a full extension slide. Features include a low profile, lever disconnect for easy drawer release, 75 lb. load rating, and easy installation. 130587 130588 130589 130590 130591 130592 130593 130594

ACCURIDE 3832SC Self-Closing Drawer Slide

Optional kits that adapt the 9301 for use as platform slides. Use on pantry pullouts, RV luggage platforms and TV or entertainment unit platforms. Brackets provides 4 bottom and 2 side mount options. Kit includes 2 brackets, four 1/4" hex head screws, four 1/4" hex head nuts and lock washers. Please see www. woodcraft.com for usage chart. Each 5+ 150242 12"...........................................................................$27.99........ $25.19 150243 16".......................................................................... $29.99........ $26.99 150244 22"..........................................................................$31.99.........$28.79 150245 28" . .......................................................................$33.99........ $30.59

142860 142861 142862 142863

5+ Pair

16".......$19.50.......$17.55 18"......$20.50......$18.45 20"......$21.50...... $19.35 22"......$23.99......$21.59

142864 142865 142866 142867

Pair

5+ Pair

16" .....$19.50.......$17.55 18"......$20.50......$18.45 20"......$21.50...... $19.35 22"......$24.99...... $22.49

ACCURIDE 3832 Full Extension Drawer Slide

113/16" Designed for use in 32mm cabinet systems, these new slides have some great features. The first mounting hole is located for the 37mm set-back used in the European system and the load rating has been increased to 100 lbs. The narrow 1/ " side clearance and the low 113/ " height is great for 2 16 shallow drawers. Slides move on silent-rolling ball bearings and feature hold-in and hold-out stops, and a quick-disconnect 1/ " 2 lever. Sold in pairs. Pair 5+ Pair Black Zinc Finish Pair 5+ Pair 124921 26".......$21.99 .... $19.79 27D01 10".......$18.50..... $16.65 150210 28".......$22.99 .... $20.69 27D02 12".......$18.99......$17.09 White Epoxy Finish 27D03 14".......$19.99......$17.99 27E30 10".......$19.50......$17.55 27D04 16".......$21.50.....$19.35 27E31 12".......$20.50.....$18.45 27D05 18".......$21.99..... $19.79 27E32 14".......$20.99.....$18.89 27D06 20".......$22.50.....$20.25 27E33 16".......$21.50.....$19.35 27D07 22".......$22.50.....$20.25 27E34 18".......$23.50.....$21.15 124918 24".......$24.99.....$22.49 27E35 20".......$23.50.....$21.15 124919 26".......$25.50.....$22.95 27E36 22".......$23.50.....$21.15 150211 28".......$25.99.....$23.39 124922 24".......$25.50.....$22.95 Electro Zinc (silver-colored) Finish 124923 26".......$25.50..... $22.95 27D11 10".......$15.99.....$14.39 Face Frame/Rear Bracket Kit 27D12 12".......$15.99 ....$14.39 Converts standard 3832 slides into 27D13 14".......$16.99 ....$15.29 "face frame" slides while providing 27D14 16".......$18.99 .....$17.09 support at the rear of the slide. Kit con27D15 18".......$18.99 .....$17.09 sists of two front brackets that are self27D16 20".......$19.50 .....$17.55 positioning for quick installation, and 27D17 22".......$20.50 ....$18.45 two rear brackets that have 2" of length 124920 24".......$20.99 ....$18.89 adjustment, and both vertical and horizontal adjustment. Assembly instructions included. 5+ 130834 ................. $4.99..... $4.49

ACCURIDE 4034 File Drawer Slides

Great for file drawers and deep kitchen drawers. These smooth 3 progressive movement slides feature all-steel ball bearings with 3 /16" full extension plus 1 1/2" of over-travel. The over-travel lets you make 113/16" use of the entire drawer and makes back of the drawer access easy! 150 lbs. load rating, designed for drawers up to 24" wide. Pair

130597 130598 130599 130601 130602

5+ Pair

16"........$33.50......$30.15 1/ " 2 18"........$35.50...... $31.95 Pair 5+ Pair  20"........$36.99......$33.29 22"........$40.99......$36.89 130603 26"............$43.99......$39.59 24"........$42.50......$38.25 130604 28"............$44.99......$40.49

Accuride Cam Drawer Adjust

Available on models 3832 and 2132, this new feature is a simple and precise way to make vertical adjustments of up to 1/8" on your slides with a simple twist of a screwdriver. Once the alignment is correct, attach fixing screws to make the adjustment permanent.

Helping You Make Wood Work ÂŽ

125


Hardware

ACCURIDE 1029 Center Mount Slide

Mounts under the drawer. Great for upgrading kitchens, bathrooms, or bureaus. Slide includes rear mounting bracket and nylon friction pads for use between the drawer and face frame. Rated at 35 lbs. Can be used individually or in pairs on wider drawers. Friction disconnect. All bright chrome finish.

ACCURIDE 3017 Over Travel Slide

Medium Duty Slide with 1" over travel for drawers up to 24" wide. A good choice for box and file drawers in wood and metal desks, credenzas and institutional furniture. Features include: positive stop, detent in, silenced operation, heavy duty handed rail and access holes for closed position mounting. 100 lb. load rating. Clear Zinc Finish. Pair 5+ Pair 150190 12".................................$31.99....$28.79 150191 14".................................$32.99....$29.69 150192 16".................................$33.99....$30.59 150193 18".................................$34.99....$31.49 150194 20".................................$35.99... $32.39 150195 22".................................$36.99... $33.29 150196 24".................................$38.99... $35.09 150197 26".................................$42.99... $38.69 150198 28".................................$43.99....$39.59

Medium duty, full extension slide for drawers up to 16" wide for environments subjected to indirect humidity such as greenhouses, garages, and locker rooms. Features include 32mm and traditional hole mounting options; cam adjust and a special H-coat overcoat providing up to 8 times more protection than standard zinc. 100 lb. load rating. 150212 150213 150214 150215 150216 150217 150218 150219 150220

Pair

Converts 3832/3834 slides into “face frame� slides while providing support for the rear of the slide. Kit consists of two front brackets that are self positioning for quick installation, two rear brackets that have 2" of length adjustment and both vertical and horizontal adjustment. Assembly instructions included. Each

5+

Each

5+ Each

3/ " 8

13/8"

ACCURIDE 3600 Bracket Mount Platform 22" Slides

ACCURIDE 2109 Suspended Mount Keyboard Slide

for computer keyboards, writing, pull out shelves or anywhere and adjustable height shelf or shallow drawer is suspended under a work surface. Features include: lever disconnect, detents so drawers may be held out or in and variable height mounting brackets. 75 lb. load rating. Clear zinc finish.

Pair

5+ Pair

3600-200 has a fixed inboard bracket only. 150204 3600-200D............$119.99......$107.99 3600-201 has a fixed inboard top bracket and outboard bottom bracket. (shown) 150205 3600-201D ......... $134.99 .... $121.49

5+ Pair

10"................................ $26.99.....$24.29 12".................................$27.99.....$25.19 16"................................ $28.99.....$26.09 18"................................ $29.99.....$26.99 20"................................ $30.99..... $27.86 22"................................ $31.99.....$28.79 24"................................ $32.99.....$29.69 26"................................ $33.99.....$30.59 28"................................ $34.99.....$31.49

Face Frame/Rear Bracket Kit

Drawer Extension

124915 ....... 105/8"-121/2".......... 13"-141/2"...........81/2"...........$7.50..........$6.75 27E04 .......... 125/8"-141/2".......... 15"-161/2"......... 101 /2"..........$7.50..........$6.75 27E01 .......... 145/8"-161/2".......... 17"-181/2"............12"............$7.99..........$7.19 27E02 .......... 165/8"-181/2".......... 19"-201/2"..........121/2"..........$7.99..........$7.19 27E03 ..........185/8"-201/2".......... 21"-221/2"..........141/2".........$8.50..........$7.65 124916 ....... 205/8"-221/2".......... 23"-241/2"..........161/2".........$8.50..........$7.65 124917 . ...... 225/8"-241/2".......... 25"-261/2".......... 171/2".......... $9.99......... $8.99

This slide is designed for use on platform pull-outs for waste or recycling, laundry or other bin storage. Features include self closing action which eliminates bounce-back and drawer creep; silenced operation; and handed lever disconnect. For drawers up to 16" wide. 175 lb. load rating. Clear zinc finish.

ACCURIDE CH3832 Weather Resistant Slides

Cabinet Depth

Drawer Length

3/ extension slides for drawers up to 16" wide. Great 4

150177 150178 150179 150180 150181 150182

Pair

ACCURIDE 3640 Heavy Duty Dual Mount Slide

ACCURIDE 2632 Low Profile Light Duty Slide

ACCURIDE 301-2590 Undermount Shelf Slide

ACCURIDE 2002 Two-Way Travel Slide

Use in large storage drawers, store fixtures and lateral files up to 42" wide. Features dual mounting option - either side or flat mount with hold in detent; 1" over travel and optional installation using either traditional or 32mm hole patterns. 200 lb. load rating for side mount and 75 lb. load rating for under or flat mounting. Load rating are per pair of installed slides. Clear zinc finish. Pair 5+ Pair 150207 16"................................ $45.99.... $41.39 150208 18".................................$47.99.... $43.19 150209 20"................................ $49.99.... $44.99

5+ Pair

12"................................ $25.99.....$23.39 14"................................ $26.50.... $23.85 16"................................ $26.99.....$24.29 18".................................$27.50..... $24.75 20".................................$27.99.....$25.19 22"................................ $28.50.....$25.65

Low profile, full extension slide for drawers up to 16" wide. Use in small to medium cabinets, desks, kitchens cabinets and store fixtures. 65 lb. load rating. Clear zinc finish. Pair 5+ Pair 150184 8"...................................$27.99.....$25.19 150185 10".................................$27.99.....$25.19 150186 12"............................... $28.99.....$26.09 150187 14"................................ $29.99.....$26.99

130834 ........................................$4.99....... $4.49

ACCURIDE 3834 Medium Duty Slide With 1" Over-Travel

For use where full access to the rear of the drawer is desired. Features include: 1" over travel; 32mm and traditional mounting hole pattern. 90 lb. load rating. Pair 5+ Pair 150221 16"................................ $16.99.... $15.29 150222 18".................................$17.99.....$16.19 150223 20"................................ $18.99..... $17.09 150224 22"................................ $19.99..... $17.99

Designed for pull out storage such as shelves, kitchen pantries and entertainment centers up to 16" inches wide. Features include dual mount (shelf or platform), almost an inch of over travel, hold in detents to prevent roll-out and bounce back plus a 155 lb. load rating. Clear zinc finish.

Pair

Rear Mounting Sockets

Credit Card Orders: 800 225-1153

Pair

5+ Pair

150175 24"................................$41.99..... $37.79 150176 28"................................$43.99.....$39.59

INNOVALA Uni-Damper

Save time when mounting Blum self-closing slides in face frame cabinets. Sockets are easily installed at the back of cabinets. Elongated slots allow for vertical and horizontal adjustment. White highdensity plastic. Sold in pairs. Screws not included. 01V06 ...................................................................$2.99

126

5+ Pair

150188 20".................................$69.99... $62.99 150189 26".................................$84.99....$76.49

3/ extension, two way travel slides for drawers or 4 shelves up to 16" wide. Use for pass through shelves and kitchen islands where access from both sides is desired. 50 lb. load rating. Clear zinc finish.

Innovala Uni-Dampers are soft close/anti-slam after market add-ons for all overlay cabinet doors using self closing hinges. For framed or frameless construction, Uni-Dampers will silence cabinet doors closing. Easy to install and economical, Uni-Dampers come in packs of five, with instructions, mounting nails and a mounting locator. 150948.............................................................$17.49

Free Technical Advice: 800 535-4486

www.woodcraft.com


Hardware ACCURIDE 3132EC Easy Close, Undermount Slide

A fully concealed under mount slide for drawer up to 30" wide. Easy Close action brings the drawer to a smooth, gentle close. Compatible with 1/2" to 5/8" drawer box thickness. Full extension; 100 lb. rating. Clear zinc finish. Pair 5+ Pair 150199 14".................................$51.99....$46.79 150200 16".................................$52.99.... $47.69 150201 18"................................ $54.99....$49.49 150202 20".................................$55.99....$50.39 150203 22"................................ $56.99... $51.29

Front Inset Bracket Kit

Permits installation of slides so the faces of the drawers are flush with the cabinet face. Mounting hardware included. Pair 5+ Pair 147878 ....................................... $8.99.......$8.09

Rear Mount Face Frame Bracket Kit

Supports face frame application by mounting to back of cabinet and supporting the rear of the slide. Mounting hardware included. Pair 5+ Pair 147879 ........................................$3.99....... $3.59

Accuride 3132 Optional Vertical Disconnect Lever

Use when the drawer bottom is flush with the drawer sub-front. Pair 5+ Pair 150247 ........................................$2.99....... $2.69

ACCURIDE 3132SC Eclipse Undermount Slides

Eclipse slides fully extend and carry a 100 lb. load rating in 30" wide drawers. Front levers actuate slide disconnect for easy drawer removal and reinsertion. Drawer front adjustment capabilities are expanded with cams and screws providing up to 1/8" vertical and horizontal movement, and the 1/ turn cam lock secures drawer front position 4 after the horizontal adjustment. Front face frame holes are sized for wood screws. Compatible with 1/ " to 5/ " drawer box thicknesses. Clear zinc 2 8 finish. Includes mounting hardware.

Per Pair

5+ Pair

147836 14"............................. $37.99...... $34.19 147837 16"............................. $39.50...... $35.55 147838 18"............................. $41.50.......$37.35 147839 20"............................. $41.99....... $37.79 147840 22"............................. $42.50...... $38.25 Rear-Mount Face Frame Bracket Kit Supports face frame application by mounting to back of cabinet and supporting the rear of the slide. Includes mounting hardware. Per Pair 5+ Pair 147879........................................ $3.99.........$3.59 Front-Inset Bracket Kit Permits installation of slides so the faces of the drawers are flush with the cabinet face. Includes mounting hardware. Per Pair 5+ Pair 147878.........................................$8.99.........$8.09

BLUM 230 Drawer Slides

These heavy gauge-steel drawer slides have aload rating of 100 lbs. and mount easily to drawer bottoms. Self-closing feature keeps kitchens looking neat. Slides have silent nylon bearings, and a durable white epoxy finish. Sold in pairs. Rear socket pair for 01V07 - 01V10. Length Ext. Pair 5+ Pair  01V07 ........................................................... 16"..........125/8"......$6.50.......$5.85 01V08 ........................................................... 18"..........141/4"...... $7.29.......$6.56 01V09 ........................................................... 20"............ 16"......... $7.49....... $6.74 01V10 ........................................................... 22".........1711/16"..... $7.49....... $6.74 01V06 rear socket, pair...............................................................$2.99

1/ " 2

Medium duty Flipper Door Slides for retracting doors mounted horizontally or vertically. Typical applications include large concealed doors for wall units, entertainment centers, cabinets of any kind and file storage systems. Max door measurements by application are 42" wide by 24" tall for a horizontal installation and 24" wide by 42" tall for a vertical application. 40lb. rating. Hinges sold separately below. 150161 14"................................................ $31.99 150162 18"................................................ $33.99 150163 20"................................................ $34.99 150164 22"................................................ $35.99 150165 24"................................................ $36.99 142852 120°, full overlay hinge...............$10.99

It's Easy To Get To Woodcraft

Call, Click, or Walk-in

800 225-1153 www.woodcraft.com

Heavy duty platform mounted slides for TV’s up to 65" wide with 22" full extension slides. Swivels 30°in both directions. Features hold-in detent; center detent on swivel platform; hole pattern designed for decorative platform applications and optional bracket kit available for flat screen mounting. 325 lb. rating. 150234....................................................... $699.99

Accuride Flat Panel Bracket Kit

Provide vertical support for flat panel TV’s and monitors. 150246..........................................................$89.99

ACCURIDE CBMAC Media Hardware Platforms

For use in Audio/Video (AV) cabinets and entertainment centers - full extension 20" slides will supports shelving units up to 203/4" wide by 18" deep and up to 55" tall with 90° of rotation providing full access to back of unit. Features include detent in and out to hold unit in place; cable management ties and clips, CBMAC-50 has 150 lb. rating. CBMAC-100 has 300 lb. rating. Each CBMAC includes mounting hardware, cable ties, cable clips and power strip. 150237 CBMAC-50................................. $550.99 150238 CBMAC-100............................... $689.99

7/ " 8

ACCURIDE 3620 TV Swivel A

ACCURIDE 113 Medium Duty Flipper Door Slides

ACCURIDE CB9320-258 TV Flat Panel/Wide Screen TV Swivel

Cable Management Grommets

Heavy duty TV swivel designed for entertainment centers, computer work stations and audio/visual equipment. For use with televisions with up to a 36" diagonal. Features 14" travel and full 360 degree swivel. 225 lb. load rating. Black finish. 150206........................................................$189.99

If your building new or altering old furniture by cutting holes to run cables and cords through, we have the grommets to help you hide those ugly raw edges. Standard two piece plastic grommets are easy to install, simply drill the appropriate size hole and insert, or in the case of the oval drill two holes and “connecting the holes” with a jig saw. Round white black brown Each 4+ 11/2" 149802 149803 149804 .$2.99 .$2.69 13/4" 149805 149806 149807 .$3.50 .$3.15 2" 149808 149809 149810 .$4.50 .$4.05 21/2" 149811 149812 149813 .$4.99 .$4.49 3" 149814 149815 149816 .$5.29 .$4.76

ACCURIDE CBERGO Keyboard Tray Systems

Oval (A) 3" x 61/2" 149817 149818 149819 .$6.25 .$5.62

Sames featrures as the 200 plus typing surface can be secured in either partial or full extended position; rear storage compartment and 3 position adjustable keyboard trays. 150236........................................................ $207.99

For mounting keyboard trays in wood or metal furniture - in home or office workstations.

CBERGO Tray 200

Fully concealed 3/4 extension slides. Features removable palm rest, extra wide tray; built in cable management; removable mouse pad and mounting brackets with 7 height adjustments. 150235........................................................$169.99

CBERGO Tray 300

Helping You Make Wood Work ®

127


Hardware Slides have a black matte finish. Great for entertainment centers, armoires, kitchen cabinet or computer centers. Instructions included. Slides, one pair required per door. Slide Length

Slide Travel

Per Pair

150166 .......14"........101/4".......$45.99 141603 .......18"....... 131/2"...... $45.99 141602 .......20"......151/2".......$45.99 141601 ...... 22"....... 171/2"...... $45.99 141600....... 24"........191/2. ..... $45.99 150167 .......26"........211/2"......$45.99 150168 .......80".......231/2".......$45.99

ACCURIDE Flipper Door Slides

Choose the appropriate slide length and add the hinge system, one pair per door, that is applicable to your design and you have the complete system. Installation is easy. Just position the slide against the ceiling and the floor of the cabinet, cut and install a follower strip, mount hinges to your door and clip into place. Each Slide is capable of handling a 42" door up to 30 lbs. Hinges are European design with 3-way adjustment. Follower strip can be installed and adjusted without removing the slide.

Hinges, one pair required per door. Inset and Face Frame, 35mm hinge cup, and maximum 13/16" thick door. Hinges sold separately. 141604 pair.......................... $24.99 Thick Doors, 40 mm hinge cup, door thickness 1" – 11/4". 130859 pair.......................... $22.50 Overlay Doors, 40 mm hinge cup 13/16" maximum door thickness. 130858 pair.......................... $22.50 40mm Carbide Forstner Bit 142512 .................................. $25.99

ACCURIDE 1432 Heavy Duty Flipper Door Slides

1432’s are for applications where big heavy doors will be used such as media centers, entertainment cabinetry and armoires. They utilize an Anti-Rak cable system specifically designed to eliminate the door sag and wracking associated with bigger doors. The 1432 can be used on doors up to 75 lbs. in weight and 78" in height. Carriers strip kits and hinges kits sold separately. Note: Each door requires slides, carrier strips and hinges. Because the number of required carrier strips and hinges can vary according to door height, we offer those items separately. For more information on application, please refer to the Accuride Technical document which can be found at woodcraft.com 150169 18"..........................$77.99 150170 20"......................... $78.99 150171 22"......................... $79.99 150172 24".......................... $81.99 150173 26"......................... $83.99 150174 28"......................... $85.99 Accuride 1432 35mm Hinge Kit This kit is for inset doors only, with each kit containing 2 pair of 35mm zinc finished clip-on hinges and all necessary mounting hardware. Quantity you’ll need depends on door height: 36" - 47" use 3 hinges; 47"- 59" use

4 hinges; 59"-71" use 5; and Over 71" use 6 hinges. 150494 ..................................$17.99 Accuride 1432 Black Hinge Carrier Strip Hinge carrier strips help support the weight of the door, permit additional hinges to be attached to the door and help all the hinges work in unison. Each kit contains to 2 strips, 3 connector clips and assembly hardware. Quantity you’ll need depends on door height. Doors 36" to 56" in height will require 2 strips for each door and doors 56” to 78” require 3 strips per door. 150240..................................$13.99 Accuride 1432 Connector Clips Kit Additional clips with which you can mount more hinges. Each kit contains 1 clip and mounting hardware. 150241 ................................... $1.50

Custom Hardwood Dovetailed Drawers

B A KREG Drawer Slide Mounting Tools

Whether you are building production cabinets or just a single set for your home or shop, these tools will greatly simplify the process of accurately positioning slides to assure smooth drawer movement. (A) The Universal Drawer Slide Mounting Tool takes the guesswork out of mounting drawer slides parallel to the drawer opening. Perfect for mounting most types of metal drawer slides including; bottom-mount, full-extension, and center-mount slides. It uses the intersection of the cabinet stile and rail in face frame cabinets or the cabinet

side in frameless cabinets as a reference point from which to position a slide perfectly parallel to the drawer opening. This is the only mounting tool that is designed to work with multiple styles of drawer slides thanks to the unique magnetic design. Simply place a metallic drawer slide into position on the base of the tool, align the tool where the stile and rail meet and drive the screws. Perfect alignment every time! 145611 . .............................. $29.99 (B) Drawer Slide Brackets are the perfect companion to Slide Mounting Tool. These rigid brackets can be clamped to the cabinet’s face frame to support the drawer while mounting the slide to the drawer’s side. Sold in pairs. 145754 . .................................$9.99

Superior quality, solid hardwood, accurately and expertly machined custom dovetail drawers are only a “phone call” away. Constructed of 5/8" thick Lenga, referred to as Fireland Cherry, a close grain wood that resembles American Cherry, but is plantation grown in South America. Drawers are machined with 9/16", half blind dovetails that are one inch on center. Drawer bottoms are made from 1/4" Baltic Birch plywood and fit snugly into the grooved inside perimeter of the drawer. Reveal on the bottom of the drawer will accommodate the new under mount slides available on the market today. Standard reveal is 1/2", but 1/4" or 3/8" reveals may be specified at time of order. Shipped knocked-down, ready-to-assemble. Just glue and clamp together. Drawer price is based on height and perimeter in inches. Use the following formula to figure your price per drawer. Add the exterior drawer width and depth and then multiply by 2, giving you the linear inches of the perimeter of the drawer. Multiply this number by the linear inch cost that corresponds to the height of the drawer. Example: A drawer that is 4" H x 12" W x 22" D will cost $37.40. Please call our customer service department for complete ordering Drawer Length

A BLUM Tandem And Solo Drawer Slides

B

Blum’s new concealed drawer slides mount directly