Welcome to the Remote Warehouse The Remote Warehouse Limited is your New Zealand remote experts, with the largest quality online range of Garage Remotes, Gate Remotes, Car Remotes
PO Box 47096, Ponsonby, Auckland 1144 Call us at: 022 063 7399 E: email@example.com Join us here: www.facebook.com/theremotewarehouse
Quality Car, Gate and Garage Door Remotes in NZ Including Merlin, Tiltamatic, Guardian, Ata, Dominator, Toyota, Ford etc. FREE SHIPPING NZ WIDE, T: 022 063 7399
The Remote Warehouse: We stock a large range of remote shells to suit many vehicles. This includes shells for Mazda, Toyota, Suzuki, Mitsubishi, Lexus, Holden,Peugot and more. If your remote still works but the shell is broken this is your most economical option. Most shells use a simple clip in system or a single screw.
If you require a shell not listed on our site please email us at firstname.lastname@example.org as we have a huge range available. Please note if you buy a Shell with a keyblade you will need to take this to your local key cutter to be cut.
Tiltamatic TRV-300 & Merlin M802 Dipswitch Remotes
All of our remotes are sent out to you with easy to follow programming instructions. These instruct you how to program your new remote directly into your door, however some older remotes use a different (easier) method for coding. Replacement remotes for the old style Merlin and Tiltamatic garage doors use a dipswitch configuration to match the remote with the door. Matching these dipswitch configurations is easy and below we will teach you how.
Instructions 1. 2. 3. 4. 5.
Remove the front cover from your existing remote control. Remove the cover from your newly purchased remote. Simply copy the 12 or 8 pin combination from your old remote onto your new remote. Replace both remote covers. Begin using your new garage remote.
Please note if you have lost your existing remote you can copy the configuration directly from the garage motor onto your new remote.
If you have any questions or require any assistance in finding the right remote for your gate, garage or car please feel free to email us at: email@example.com For accounts and admin enquiries please email: firstname.lastname@example.org For more information about The Remote Warehouse and to read customer testimonials take a look at our Facebook page: www.facebook.com/theremotewarehouse
If you need any technical help just email us at email@example.com
Tech Support Written by Tech Support Add a comment March 26, 2014
How To Program Merlin M842 and M832 Garage Remotes
We get numerous emails from customers and site viewers requesting the instructions for programming their M842 and M832 Merlin Garage remotes into their units. The good news is its super simple and we will tell you how step by step below. If you have trouble finding your learn button please look at the example pictures below.
Instructions 1. Located the red 'learn' button or any button marked learn on the garage motor. 2. Press and hold the 'learn' button until the light starts flashing. 3. Now press the main (large) button on the new remote followed by pressing the secondary (smaller) button on the remote.
1. 'Learn' button is located under the green plastic cover. You can remote it with a fingernail or screwdriver. 2. 'Learn' button is in small square compartment on underside of the unit.
We hope this helps you out. For more info. Visit us at : www.theremotewarehouse.co.nz
Published on Jun 3, 2014
Quality Car, Gate and Garage Door Remotes in NZ Including Merlin, Tiltamatic, Guardian, Ata, Dominator, Toyota, Ford etc. FREE SHIPPING NZ W...