Building
23
Step by step •
To draw the partition walls of 0,15 m width click on the Wall command in the Building group of the Toolbox with the right mouse button. A dialog appears, set the width of the wall to 0,15 (in meters) then press the ENTER key.
•
We are going to draw the partition wall over the stair first. Click on the Wall command in the Building group of the Toolbox, then on the Distance from Endpoint Icon from the Reference toolbar (you can find it at the bottom of the screen). Type the distance from the corner (3,7), then click on the inner side of the right existing wall near the upper corner (1). In this way you have placed the first point of the wall. Move the mouse to the left, to the side of the existing wall. When the cursor turns into a “perpendicular” sign, click on the side of the wall (2), then press the ENTER key.
•
Draw the other 3 walls in the eastern block in the same way. All of the desired modifications are inside the area marked with orange signs. Outside this area it is enough to place the walls roughly on the underlying picture.
•
While drawing the walls the program creates connections between them automatically. Under certain conditions it is necessary to modify or fix them manually. Click with the right mouse button on a wall which you would like to connect to another one, and choose the T, L or X connection from the menu.
®
ARCHLine.XP Interior