Page 1

CIT 245 Entire Course

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 1 Individual Performing Initial Device Configuration CIT 245 Week 1 Individual Interface Configuration and Cabling CIT 245 Week 1 Individual Interconnecting Cisco Networking Devices CIT 245 Week 2 Individual Configure and Verify Switching Concepts CIT 245 Week 2 Individual Configure, Verify, and Troubleshoot Port Security CIT 245 Week 2 Individual Simple Network Diagram CIT 245 Week 3 Individual Configuring and Verifying VLANs CIT 245 Week 3 Individual Configure, Verify, and Troubleshoot Interswitch Connectivity CIT 245 Week 3 Individual Layer-2 Collision and Broadcast Domains CIT 245 Week 4 Individual IPv4 Addressing and Subnetting CIT 245 Week 4 Individual Cisco IOS Troubleshooting Tools CIT 245 Week 5 Individual Designing IPv4 Addressing CIT 245 Week 5 Individual Troubleshooting Methodologies ===============================================

CIT 245 Week 1 Individual Interconnecting Cisco Networking Devices


For more course tutorials visit www.newtonhelp.com

CIT 245 Week 1 Individual Interconnecting Cisco Networking Devices Complete the following Practice Labs courses:  

“100-101 Interconnecting Cisco Networking Devices Part 1” “200-101 Interconnecting Cisco Networking Devices Part 2”: o “Spanning Tree and Etherchannels”:  Exercise 1 – “Spanning-Tree Fundamentals and Manipulation”  Exercise 2 – “Spanning-Tree and EtherChannels” o “Manage Cisco IOS Files”:  Exercise 1 – “Manage IOS Configuration Files”  Exercise 2 – “Manage Cisco IOS” o “Configure and Verify a Basic WAN Connection”:  Exercise 1 – “Configuring a Point-to-Point Link”  Exercise 2 – “Configuring a Point-to-Point Link Using PPP” o “Troubleshooting the WAN”:  Exercise 1 – “Troubleshooting the WAN”  Exercise 2 – “Resolutions” o “Troubleshoot Switch Related Technologies”:  Exercise 1 – “Troubleshooting Layer2 Related Technologies”  Exercise 2 – “Resolutions”

Once you have completed each of the lab exercises, capture a screenshot of the exercise results. Copy and paste the screenshots into a Microsoft® Word document.


Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 1 Individual Interface Configuration and Cabling

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 1 Individual Interface Configuration and Cabling Complete the following exercises in Practice Lab “100-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Interface Configuration and Cabling”: o Exercise 1 – “Interface Configuration Options” o Exercise 2 – “Examining Collisions and Other Types of Errors” o Exercise 3 – “Cabling Issues”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================


CIT 245 Week 1 Individual Performing Initial Device Configuration

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 1 Individual Performing Initial Device Configuration Complete the following exercises in Practice Lab “100-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Performing Initial Device Configuration”: o Exercise 1 – “Essential Switch Configuration” o Exercise 2 – “Configuring Remote Access” o Exercise 3 – “Essential Router Configuration”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 2 Individual Configure and Verify Switching Concepts

For more course tutorials visit


www.newtonhelp.com

CIT 245 Week 2 Individual Configure and Verify Switching Concepts Complete the following exercises in Practice Lab “100-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Configure and Verify Switching Concepts”: o Exercise 1 – “Examining the Functionality of the MAC Address Table” o Exercise 2 – “Examining MAC Address Aging” o Exercise 3 – “Frame Switching Methods and Frame Flooding”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 2 Individual Configure, Verify, and Troubleshoot Port Security

For more course tutorials visit www.newtonhelp.com


CIT 245 Week 2 Individual Configure, Verify, and Troubleshoot Port Security Complete the following exercises in Practice Lab “100-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Configure, Verify, and Troubleshoot Port Security”: o Exercise 1 – “Static and Dynamic Port Security” o Exercise 2 – “Additional Port Security Configuration Settings” o Exercise 3 – “Configuring Err-disable Recovery”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 2 Individual Simple Network Diagram

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 2 Individual Simple Network Diagram


Create a 1-page network diagram depicting the scenario from the Week Two Learning Team collaborative activity “Build a Simple Network,” keeping in mind the following:  

Use Microsoft® Visio® to create the network diagram. Use proper networking icons in your network diagram (refer to the Preface of Cisco CCENT/CCNA ICND1 100-105 Official Cert Guide.) Copy and paste your network diagram into the Microsoft® Word document.

Write a 1-page analysis of your Learning Team collaborative discussion, the networking devices you selected, and their purpose. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 3 Individual Configure, Verify, and Troubleshoot Interswitch Connectivity

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 3 Individual Configure, Verify, and Troubleshoot Interswitch Connectivity Complete the following exercises in Practice Lab “100-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”:


“Configure, Verify, and Troubleshoot Interswitch Connectivity”: o Exercise 1 – “Trunk Configuration and Dynamic Trunking Protocol – Part I” o Exercise 2 – “VLAN Trunk Protocol” o Exercise 3 – “Trunk Configuration and Dynamic Trunking Protocol – Part II” o Exercise 4 – “Native VLAN Configuration”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 3 Individual Configuring and Verifying VLANs

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 3 Individual Configuring and Verifying VLANs Complete the following exercises in Practice Lab “101-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Configuring and Verifying VLANs”: o Exercise 1 – “VLAN Creation and Management” o Exercise 2 – “Creating a Voice VLAN”


From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 3 Individual Layer-2 Collision and Broadcast Domains

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 3 Individual Layer-2 Collision and Broadcast Domains Create a 1-page network diagram depicting the scenario from the Week Three Learning Team collaborative activity “Layer-2 Collision and Broadcast Domains,” keeping in mind the following:  

Use Microsoft® Visio® to create the network diagram. Use proper networking icons in your network diagram (refer to the Preface of Cisco CCENT/CCNA ICND1 100-105 Official Cert Guide.) Identify the different collision and broadcast domains on your network diagram: o Draw a green circle around each collision domain. o Draw a red circle around each broadcast domain.


Copy and paste your network diagram into the Microsoft® Word document.

Write a 1-page analysis of the Learning Team collaborative discussion and why it is better to increase the number of collision and broadcast domains in your network rather than increase the number of devices in a single collision or broadcast domain. Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 4 Individual Cisco IOS Troubleshooting Tools

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 4 Individual Cisco IOS Troubleshooting Tools Complete the following exercises in Practice Lab “101-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

“Cisco IOS Troubleshooting Tools”: o Exercise 1 – “Ping and Extended Ping” o Exercise 2 – “Traceroute”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab.


Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 4 Individual IPv4 Addressing and Subnetting

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 4 Individual IPv4 Addressing and Subnetting Complete the following exercises in Practice Lab “101-105Interconnecting Cisco Networking Devices (ICND1 v3.0)”: 

Configure, Verify, and Troubleshoot IPv4 Addressing and Subnetting”: o Exercise 1 – “Perform Subnetting to Determine an Addressing Scheme” o Exercise 2 – “Implement an IP Addressing Scheme” o Exercise 3 – “Verifying and Troubleshooting the Implemented IP Address Scheme”

From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab. ===============================================


CIT 245 Week 5 Individual Designing IPv4 Addressing

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 5 Individual Designing IPv4 Addressing Create a 1-page network diagram depicting the scenario from the Week Five Learning Team collaborative activity “Designing IPv4 Addressing,” keeping in mind the following:  

Use Microsoft® Visio® to create the network diagram Use proper networking icons in your network diagram (refer to the Preface of Cisco CCENT/CCNA ICND1 100-105 Official Cert Guide) Copy and paste your network diagram into the Microsoft® Word document

Write a 2-page analysis on the following:   

Your Week Five collaborative discussion How would you determine the custom subnet mask to meet the requirements for this task? A subnet information table identifying each subnet, the subnet address, subnet mask in dotted decimal, highest usable IP address, lowest usable IP address, and broadcast address


An IP Addressing table which includes the IP address, subnet mask, and gateway address for the printer in the Sales office and the printer in the Business office.

Submit your assignment using the Assignment Files tab. ===============================================

CIT 245 Week 5 Individual Troubleshooting Methodologies

For more course tutorials visit www.newtonhelp.com

CIT 245 Week 5 Individual Troubleshooting Methodologies Complete the following exercises in Practice Lab “Cisco 100-105 – Interconnecting Cisco Networking Devices (ICND1 v3.0)”: § “Troubleshooting Methodologies”: § Exercise 1 – :Examine the Recommended Troubleshooting Methodology for Networks” § Exercise 2 – “Implementing Troubleshooting Methodologies” From within Practice Labs, copy and paste the final config from each device into a Word document. Please ensure that you have a full “show running config” output visible from any devices modified as part of the lab. Submit your assignment using the Assignment Files tab.

===============================================

CIT 249 Education Begins/newtonhelp.com  

For more course tutorials visit www.newtonhelp.com CIT 245 Week 1 Individual Performing Initial Device Configuration CIT 245 Week 1 Indivi...

CIT 249 Education Begins/newtonhelp.com  

For more course tutorials visit www.newtonhelp.com CIT 245 Week 1 Individual Performing Initial Device Configuration CIT 245 Week 1 Indivi...

Advertisement