__MAIN_TEXT__

Page 1

PRODUCT DATA SHEETS

Keeping safe is a continuous challenge and one we believe is worth taking on. We believe in ZERO HARM.


Contents WIRE ROPE

HOISTING & WINCHING

Verope 1960 Tensile Grade

Chain Blocks

6x36 Steel Core 1770 Grade

Lever Blocks

Wire Rope Grips

Air Hoist Beam Clamps

FIBRE ROPE

Push & Geared Trolleys

High Performance Synthetic Rope

Clamps

General Purpose Rope

Winches

Natural Rope

Lifting Bag Magnetic Lifter

LIFTING & RIGGING COMPONENTS Shackles

RECOVERY & TOWING

Turnbuckles

Panther Recovery Strop

Concrete Lifting Clutch

Soft Shackles

Weld-On Lifting Point

Link-It Soft Shackles

De-Centred Lifting Point

Puller Winch

Link Brackets

Webbing Puller

ALLOY CHAIN SLINGS & FITTINGS

LOAD RESTRAINT

Single Leg

Ratchet Tie-Down

Two Leg

Truck Winch

Four Leg Fittings

FABRICATED LIFTING EQUIPMENT Modular Spreader Beams

GENERAL PURPOSE CHAIN Long Link – Gold Stainless Steel Chain

SYNTHETIC SLINGS Round Slings Flat Slings Powertex Round Slings

1300 LIFTING

info@bullivants.com www.bullivants.com


Veropro 8 1960 Grade Veropro 8 1960 Tensile Grade is an 8-strand rope with compacted outer strands and a rope core covered with a plastic layer.

Main Features: •

Has a very high breaking strength

Excellent bending fatigue results

Stable rope structure and achieves excellent resistance to crushing and abrasion

Excellent spooling behaviour on multilayer drum

May not be used with a swivel

Ideal for hoist rope, luffing rope, trolley rope, crowd winch rope, crowd rope and grab rope

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0080NADA

8

0.288

Minimum Breaking Load kN 57.70

W0090NADA

9

0.364

73.00

W0100NADA

10

0.450

90.10

W0110NADA

11

0.544

109.10

W0130NADA

13

0.760

152.30

W0140NA3A

14

0.822

176.60

W0150NADA

15

1.012

202.80

W0160NADA

16

1.152

230.70

W0180NA3A

18

1.457

292.00

W0190NA3A

19

1.624

325.30

W0200NA3A

20

1.799

360.50 436.20

W0220NA3A

22

2.177

W0240NA3A

24

2.591

519.10

W0254NADA

25.4 -1”

2.902

581.40

W0260NADA

26

3.041

609.20

W0280NA3A

28

3.527

706.50

W0320NA3B

32

4.606

922.80

W0360NA3A

36

5.830

1168.00

W0380NA3B

38

6.496

1301.00

W0480NA3A

48

10.36

2077.00

Veropro8_1960Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Veropro 8 1960 Grade Applications: Gantry Crane: Luffing Rope

Overhead Crane:

Ladle Crane: Crane:

Hoist/Auxiliary Hoist Rope

Hoist/Auxiliary Hoist Rope

Jib Crane: Hoist Rope

Crawler Crane: Luffing/

Mobile/Telescopic Crane:

Luffing Crane:

Harbor Mobile Crane:

Boom Hoist/Pendant Rope

Luffing Rope

Luffing/Pendant Rope

Hoist/Grab Rope

Deck Crane/Unloader:

Offshore Crane:

Luffing/Grab Rope

Luffing Rope

Straddle Crane: Hoist Rope

Tower Crane: Trolley/Pendant Rope

Rubber Tyred Gantry (RTG) Crane: Hoist Rope

Veropro8_1960Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Veropower 8 1960 Grade Veropower 8 1960 Tensile Grade is a rotary swaged 8-strand rope in a parallel lay construction with compacted outer strands and a rope core covered with a plastic layer.

Main Features: •

Very stable rope structure and achieves good bending fatigue

Offers superior crushing resistance and excellent resistance to abrasion

Excellent spooling behaviour on multilayer drums

May not be used with a swivel

Ideal for hoist rope, luffing rope, trolley rope, crowd winch rope, crowd rope and grab rope

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0120NRDA

12

0.717

Minimum Breaking Load kN 147.40

W0140NRDA

14

0.976

200.60

W0160NR3A

16

1.275

262.00

W0180NRDA

18

1.614

331.60

W0220NRDA

22

2.411

495.30

Applications: Jib Crane: Hoist Rope

Overhead Crane: Hoist/Auxiliary Hoist Rope

Gantry Crane: Luffing Rope

Mobile/Telescopic Crane: Luffing Rope

Ladle Crane: Hoist/Auxiliary

Foundation Equipment:

Hoist Rope

Feed Unit

Crawler Crane: Luffing/ Boom Hoist/ Pendant Rope

Offshore Crane: Luffing Rope

Luffing Crane:

Harbor Mobile Crane:

Deck Crane/Unloader:

Hoist/Grab Rope

Tower Crane:

Luffing/Pendant Rope

Luffing/Grab Rope

Trolley/Pendant Rope

Veropower8_1960Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Verotop 1960 Grade Verotop 1960 Tensile Grade is a very flexible non-rotating rope with compacted strands with excellent fatigue life.

Main Features: •

35 x 7 Compacted non-rotating rope

Very high breaking strength

Excellent spooling behaviour on multi-layer drum

Good bending fatigue

Offers superior crushing resistance and excellent resistance to abrasion

Can be used either with or without swivel

Ideal for hoist ropes and auxiliary hoist ropes on mobile cranes and Kelly ropes on piling rigs

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0080QSEB

8

0.313

Minimum Breaking Load kN 63.86

W0090QY4B

9

0.397

69.83

W0100QR4B

10

0.490

95.43

W0110QREB

11

0.593

115.50

W0120QREB

12

0.705

137.40

W0130QREB

13

0.828

161.30

W0140QREB

14

0.960

187.00

W0160QS4B

16

1.254

255.40

W0180QREB

18

1.587

309.20

W0190QREB

19

1.768

344.50

W0200QREB

20

1.959

381.70

W0220QR4B

22

2.371

461.90

W0240QSEB

24

2.821

574.80

W0250QREB

25

3.061

596.40

Applications: Jib Crane: Hoist Rope

Overhead Crane: Hoist/

Ladle Crane: Hoist/

Auxiliary Hoist Rope

Auxiliary Hoist Rope

Mobile/Telescopic Crane:

Truck Crane: Hoist Rope

Hoist/Auxiliary Hoist Rope

Foundation Equipment:

Offshore Crane:

Crawler Crane: Hoist/

Hoist/ Auxiliary Hoist Rope

Luffing Crane: Hoist

Knuckle Boom Crane:

Auxiliary Hoist Rope

Tower Crane:

Hoist/Auxiliary Hoist Rope

Rope

Hoist Rope

Hoist/Auxiliary Hoist Rope

Verotop_1960Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Verotop E 2160 Grade Verotop E 2160 Tensile Grade is a very flexible non-rotating rope with compacted outer strands with excellent fatigue life.

Main Features: •

Compacted non-rotating rope

High breaking strength

Excellent spooling behaviour on multi-layer drum

Achieves very good bending fatigue results

Offers excellent resistance to crushing and abrasion

Can be used either with or without swivel

Ideal for hoist ropes and auxiliary hoist ropes on mobile cranes and tower cranes

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0150QZEB

15

1.074

Minimum Breaking Load kN 211.80

W0160QZEB

16

1.222

241.00

W0170QZEB

17

1.379

273.00

W0180QZEB

18

1.546

305.00

W0190QZEB

19

1.723

339.80

W0200QZEB

20

1.909

376.50

Applications:

Jib Crane: Hoist Rope

VerotopE_2160Grade_DS032020

Overhead Crane:

Ladle Crane:

Hoist/Auxiliary Hoist Rope

Hoist/Auxiliary Hoist Rope

Tower Crane:

Truck Crane:

Hoist Rope

Hoist Rope

1300 LIFTING

Luffing Crane: Hoist Rope

info@bullivants.com www.bullivants.com


Verotop S 2160 Grade Verotop S 2160 Tensile Grade is a very flexible non-rotating rope with compacted strands and very high breaking strength with excellent fatigue life.

Main Features: •

Very strong compacted non-rotating rope

Achieves excellent bending fatigue results

Offers excellent resistance to crushing and abrasion

Possesses perfect spooling behaviour on multilayer drum

Can be used either with or without swivel

Ideal for hoist ropes and auxiliary hoist ropes on mobile cranes and crawler ropes

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

Minimum Breaking Load kN

W0200RJ3B

20

2.004

409.00

W0220RJ3B

22

2.425

494.90

W0240RJ3B

24

2.886

589.00

W0254RJ3B

25.4-1”

3.233

659.70

W0260RJ3B

26

3.387

691.30

W0280RJ3B

28

3.928

801.70

Applications: Mobile/Telescopic Crane:

Crawler Crane:

Hoist/Auxiliary Hoist Rope

Hoist/Auxiliary Hoist Rope

VerotopS_2160Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Verotop P 1960 Grade Verotop P 1960 Tensile Grade is a non-rotating rope with compacted strands and a rope core covered with a plastic layer.

Main Features: •

Has a very high breaking strength

Provides a very stable rope structure

Achieves excellent bending fatigue results

Offers excellent crushing and abrasion distance

Excellent spooling behaviour on multilayer drum

Can be used either with or without swivel

Ideal for hoist/auxiliary hoist on mobile cranes, offshore cranes and hoist ropes for pilling drill rigs

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0200QTEB

20

1.949

Minimum Breaking Load kN 377.60

W0220QTEB

22

2.359

456.90

W0240QTED

24

2.807

543.70

W0260QTEB

26

3.294

638.10

W0280QTEB

28

3.821

740.10

W0320QT4B

32

4.990

966.60

W0420QT4B

42

8.597

1665.00

Applications:

Foundation Equipment:

Offshore Crane:

Deck Crane/Unloader:

Hoist/Auxiliary Hoist Rope

Hoist/Auxiliary Hoist Rope

Hoist Rope

VerotopP_ 1960Grade_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Powerform 35 1960 Grade Powerform 35 1960 Tensile Grade is a flexible non-rotating rope with compacted strands.

Main Features: •

Construction 35xK7(16xK7:6x K7+6xK7-6xK7-1x7)

Flexible steel wire rope

High strength rope

Maximum resistance to rotation

Increased resistance to crushing

Increased abrasion resistance resulting from the unique compaction process

Suitable for use on single part and multi-part hoist receiving systems

Specifications: Bullivants Mfr No.

Diameter mm

Approx. Weight kg/m

W0130QIEB

13

0.850

Minimum Breaking Load kN 155

W0140QIEB

14

0.986

180

W0160QIEB

16

1.290

233

W0180QIEB

18

1.630

300

W0190QIEB

19

1.820

331

W0200QIEB

20

2.010

372

W0210QIEB

21

2.220

402 444

W0220QIEB

22

2.430

W0240QIEB

24

2.900

531

W0260QIEB

26

3.400

621

W0280QIEB

28

3.940

720

W0320QIEB

32

5.150

944

Applications: Mobile Crane: Hoist Rope

Powerform35_1960 Grade_DS032020

Tower Crane:

Lattice Boom Crane:

Offshore Pedestal Crane:

Dock Side Crane:

Hoist Rope

Hoist Rope

Hoist Rope

Hoist Rope

1300 LIFTING

info@bullivants.com www.bullivants.com


6x36 Steel Core 1960 Grade Usha Martin 6x36 Steel Core 1960 Tensile Grade is a flexible rope with excellent fatigue life. Ideal for crane rope in hoists, port cranes, tow ropes and winch ropes.

Main Features: •

Construction 6x36 (14-7+7-7-1)-CWR

Flexible steel wire rope

Excellent fatigue life

Commonly used for wire rope slings

Complies with AS 3569:2016

Specifications: Bullivants Mfr No. W0160IT3A

Diameter

Approx. Weight

Minimum Breaking Load

mm

kg/m

kN

16

1.07

179.00

W0180IT3A

18

1.35

226.00

W0200IT3A

20

1.63

279.00

W0220IT3A

22

2.02

338.00

W0240IT3A

24

2.41

402.00

W0260IT3A

26

2.83

472.00

W0280IT3A

28

3.28

547.00

W0300IT3A

30

3.78

631.00

W0320IT3A

32

4.26

715.00

Applications: Container Crane: Hoist/

Lattice Boom:

Boom Hoist Rope

Hoist Rope

6x36 Steel Core G1960_DS032020

Steelworks Ladle:

Unloader: Hoist/

Hoist Rope

Boom Hoist Rope

1300 LIFTING

info@bullivants.com www.bullivants.com


6x36 Steel Core 1770 Grade Usha Martin 6x36 Steel Core 1770 Tensile Grade is a flexible rope with excellent fatigue life. Ideal for crane rope in hoists, port cranes, tow ropes and winch ropes.

Main Features: •

Construction 6x36 (14-7+7-7-1)-CWR

Flexible steel wire rope

Excellent fatigue life

Commonly used for wire rope slings

Average fill factor of 60.9%

Complies with AS 3569:2016

Specifications: Bullivants Mfr No.

Diameter

Approx. Weight

mm

kg/m

Minimum Breaking Load kN

W0080IR3A

8

0.267

40.30

W0090IR3A

9

0.338

51.00

W0100IR3A

10

0.408

63.00

W0120IR3A

12

0.602

90.70

W0130IR3A

13

0.707

107.00

W0140IR3A

14

0.820

124.00

*Other sizes available upon request

Applications:

Container Crane: Hoist/

Lattice Boom:

Boom Hoist Rope

Hoist Rope

6x36 Steel Core G1770_DS032020

Steelworks Ladle:

Unloader: Hoist/

Hoist Rope

Boom Hoist Rope

1300 LIFTING

info@bullivants.com www.bullivants.com


Wire Rope Grips Main Features: •

Simple mechanical means temporarily secures wire rope

Termination with a wire rope grip needs to be inspected regularly

Not to be used for lifting

Not to be used in live running ropes

Ideal for guying, catenary systems and temporary wire rope adjustment

Designed and tested in accordance with AS 2076

Heavy Duty Wire Rope Grips Bullivants Mfr No.

Suits Rope Dia.

No.Grips*

mm WRG-T-060-G

6

3

WRG-T-080-G

8

3

WRG-T-100-G

10

3

WRG-T-120-G

12

3

WRG-T-140-G

14

4

WRG-T-160-G

16

4

WRG-T-180-G

18

4

WRG-T-200-G

20

4

WRG-T-220-G

22

4

WRG-T-260-G

26

5

WRG-T-280-G

28

5

* No. Grips identifies the number of grips required per termination

Commercial Wire Rope Grips Bullivants Mfr No.

Suits Rope Dia. mm

WRG-U-030-G

3

WRG-U-050-G

5

WRG-U-060-G

6

WRG-U-080-G

8

WRG-U-100-G

10

WRG-U-120-G

12

WRG-U-140-G

14

WRG-U-160-G

16

WRG-U-200-G

20

BV_WireRopeGrips_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Wire Rope Grips Care and Use: 10 CARE AND USE OF WIRE-ROPE GRIPS 10.1 Inspection A termination made with wire-rope grips shall be inspected at regular intervals. The preferred frequency of inspection is after each loading. In most applications, it will be found that the nuts require further adjustment. 10.2 Use Properly applied wire-rope grips afford a simple mechanical means of securing the end of a steel-wire rope. They are appropriate for temporarily securing the end of a steel-wire rope that may need to be shortened. They should not be used to secure a rope that is later to be lengthened from the gripped end (see Clause 10.4). Wire-rope grips are not intended for the permanent fastening of a rope that is subject to high dynamic loading. Wire-rope grips shall not be used for lifting purposes. Also, wire-rope grips shall not be used for rope terminations on load suspension devices that are used for lifting. Where wire-rope grips are fitted to ropes constructed of higher-grade wire than that described in Appendix D, the assembly may need to be derated to reflect the lower capacity of the wire-rope grips, or additional wire-rope grips may be required. Any manufacturer’s recommendations should be complied with (see also Item (b) of Clause 8.2). 10.3 Live running ropes Wire-rope grips shall not be used for making terminations on live running ropes (i.e. one that applies force to a moving object) nor where the rope is required to support persons or suspended loads. 10.4 Rope lengthening Wire-rope grips should not be used where there is a likelihood of the rope having to be lengthened at that end. Lengthening would bring at least part of the rope on which the wire-rope grip had been fastened into a position that is subject to full load. The danger is that this part of the rope may have been damaged by the effects of fatigue or by pressure exerted by the wire-rope grip. 10.5 Method of application The effectiveness of a wire-rope termination made with wire-rope grips depends upon ensuring the required number of wire-rope grips are used, and the spacing, orientation, placement and tightening of the grips are done in accordance with this Standard. For wire ropes of intermediate sizes, the next larger size of wire-rope grip shall be used. The number of wire-rope grips per connection shall be not less than the minimum specified in Table 1. If the manufacturer or supplier recommends a greater number of wire-rope grips per connection than the minimum specified in Table 1, this recommendation shall be followed. Grips with u-bolts shall be fitted to a wire rope as shown in Figure 1, but not as shown in Figure 2. The bridge shall be fitted on the working part of the rope and the u-bolt bearing on the tail end of the rope. Wire-rope grips shall not alternate in orientation on the rope. The wire-rope grips in a connection should be spaced along the wire rope at distances of approximately six rope diameters, with the position of the one nearest the end connection as shown in Figure 1 to be as close as possible to, but not less than one rope diameter from, the end fitting. Where a round

BV_WireRopeGrips_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Wire Rope Grips thimble is used (see Figure 1(b)), the distance between the round thimble and the first wire-rope grip should be not less than twice the diameter of the rope. The sequence of tightening an assembly of wire-rope grips on a wire-rope connection after they have been correctly positioned is from the thimble outwards. The tightening torque shall be achieved on greased bearing surfaces of the nuts. With improperly tightened nuts, or with fewer grips than the number recommended, the end of the rope might draw through the wirerope grips even due to a light loading. The wire-rope grips furthest from the eye of the thimble should not be overtightened as that position is the most vulnerable part of such an assembly. The tightening torque applied to the nuts shall comply with any instructions provided by the manufacturer or supplier; however, where instructions are not provided by the manufacturer or supplier, the tightening torque applied to the nuts shall be the relevant value that is listed in Table 1.

Correct method of fitting wire rope grips:

Figure 1: Normal thimble

Figure 1b: Rounded thimble NOTE: d = diameter of rope.

Incorrect method of fitting wire rope grips:

Figure 2

BV_WireRopeGrips_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Wire Rope Grips Table 1 - Attachment of Wire Rope Grips: Nominal Size of wire rope

Nominal size of thread of bolt

Minimum number of wire

Tightening torque

grip

or stud

rope grips

N.m

mm

mm

8

8

3

6

10

10

3

16 24

12

12

3

14

12

4

35

16

16

4

50

18

16

4

65

22

16

4

100

26

20

5

135

28

20

5

160 210

32

20

6

36

24

6

275

40

24

6

365

44

28

8

52

32

8

56

32

8

60

32

9

64

32

9

70

32

10

75

38

10

See Note 2

Notes: 1.

This table is based on information given in superseded British Standards.

2.

The tightening torque for wire rope grips that are larger than 40mm should conform to the manufacturer’s recommendations.

BV_WireRopeGrips_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Samson Amsteel®-Blue High Performance Rope Amsteel®-Blue is a torque-free 12-strand single braid rope that size for size is as strong as steel but outlasts wire 3:1, making it an excellent wire rope replacement. The combination of Dyneema® fibre and Samthane coating provide abrasion and tension fatigue resistance for superior wear.

Main Features: •

Dyneema® SK78 fibre

12 Strand Class II

Excellent wire rope replacement

Excellent abrasion resistance

Highly flex fatigue resistant

Similar elastic elongation to wire rope

Floats and remains visible on water surfaces – will not sink in muddy conditions (specific gravity 0.98)

Suitable for recovery slings tug pendant, mainlines, winch lines and lifting slings

ZERO HARM Product Features: •

Low stretch (reduced recoil) minimising risk of injury

Lightweight for fast change out reducing the risk of potential manual handling injuries

Specifications: Bullivants Mfr No.

Diameter

Circ.

Weight per

Average

Minimum

ISO* 2370

mm

mm

100 Metres

Strength

Strength

Strength

kg

kg

kg

MT

0.45

730

650

0.73

WU1-0025-RB

2.5^

7.5

WU1-004-RB

4

12.0

1.1

1,800

1,600

1.8

WU1-005-RB

5

15.0

1.5

2,400

2,200

2.4

WU1-006-RB

6

18.0

2.4

3,900

3,500

3.9

WU1-008-RB

8

24.0

4.0

6,200

5,600

6.2

WU1-009-RB

9

27.0

5.1

8,900

8,000

8.9

WU1-012-RB

12

36.0

8.8

15,400

13,900

15.4

WU1-014-RB

14

42.0

11.8

18,400

16,500

18.4

WU1-016-RB

16

48.0

15.2

24,000

21,600

24.0

WU1-018-RB

18

54.0

19.8

29,200

26,300

29.2

WU1-022-RB

22

66.0

29.2

41,200

37,100

41.2

WU1-026-RB

26

78.0

40.9

60,800

54,700

60.8

WU1-030-RB

30

90.0

53.9

74,800

67,400

74.8

WU1-036-RB

36

108.0

76.9

103,000

93,100

103.0

WU1-042-RB

42

126.0

106.0

139,000

125,000

139.0

WU1-056-RB

56

168.0

173.0

244,000

219,000

244.0

WU1-064-RB

64

192.0

248.0

300,000

270,000

300.0

WU1-088-RB

88

264.0

506.0

662,000

596,00

662.0

^ Size 2.5mm changes from 12-strand to 8-strand construction. *ISO Strength specifications are for unspliced rope. All other strength specifications are for spliced rope.

Samson Amsteel Blue-DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


Samson Fusion 12 High Performance Rope Fusion-12 is a 12-strand Class II single braid rope which is manufactured with a blend of polyester and Dyneema® HMPE fibers.

Main Features: Blend of Dyneema® and polyester •

Easy to inspect

Higher strength than lines made of 100% polyester

Improved abrasion resistance

Lighter than lines made of 100% polyester

Reduced elongation

Size for size, pulls heavier loads than traditional polyester lines

Performs well on winches

Suitable for tug general working lines

ZERO HARM Product Features: •

Low stretch (reduced recoil) minimising risk of injury

Lightweight for fast change out reducing the risk of potential manual handling injuries

Specifications: Bullivants Mfr No. WUD-FUS12-024-RG

Diameter

Circ.

Weight per

Average

Minimum

ISO 2370

mm

mm

100 Metres

Strength

Strength

Strength

kg

kg

kg

MT

72.0

37.3

25,700

23,600

26.2

24

WUD-FUS12-072-RG

72

216.0

304.0

183,000

169,000

187.0

WUD-FUS12-080-RG

80

240.0

345.0

207,000

190,000

211.0

WUD-FUS12-088-RG

88

264.0

446.0

264,000

242,000

269.0

* ISO strength specifications are for unspliced rope. All other strength specifications are for spliced rope.

Samson Fusion12-DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


Samson Saturn 12 High Performance Rope Saturn 12 is 12 Strand single braid rope made with Dyneema® SK78 fiber, which provides improved service life in applications where creep results from long-term static loads. Its proprietary coating improves abrasion resistance and has been enhanced for greater UV resistance.

Main Features: •

Dyneema® SK78 fibre

Torque free construction, 12 strand single braid that yields the maximum in strength to weight ratio and size for size, is the same as steel

UV Resistant

Low creep

Light weight, high strength and low stretch

Excellent wire rope replacement

Samthane coated

Floats and remains visible on water surfaces – will not sink in muddy conditions (specific gravity 0.98)

Easy to handle, inspect and splice in the field

Ideal for recovery slings tug pendant, mainlines and winch lines

ZERO HARM Product Features: •

Low stretch (reduced recoil) minimising risk of injury

Lightweight for fast change out reducing the risk of potential manual handling injuries

Specifications: Bullivants Mfr No. WU9-012-RO

Diameter

Circ.

Weight per 100

Average

Minimum

ISO* 2370

mm

mm

Metres kg

Strength kg

Strength kg

Strength MT

12

36.0

8.8

15,400

13,900

15.4

WU9-018-RO

18

54.0

19.8

29,200

26,300

29.2

WU9-036-RO

36

108.0

76.9

103,000

93,100

103.0

WU9-044-RO

44

132.0

117.0

152,000

137,000

152.0

* ISO strength specifications are for unspliced rope. All other strength specifications are for spliced rope.

Samson Fusion12-DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


Polypropylene Green Rope

Polypropylene Green Rope is a high strength rope with good shock absorption. It is a general-purpose rope which is strong and easy to handle. Available in coils and on reels on request.

Main Features: •

Tough, extremely strong and easy to work and knot

UV stabilised with excellent wearing properties and a high strength to weight ratio

Resistant against rot, most acids, alkalis and other chemicals

Low stretch and good knot retention

Floats on water, zero absorption

Suitable for a range of industrial areas, particularly marine, construction, mining, rural, commercial fishing and petroleum

Bullivants Mfr No.

Diameter

Maximum Breaking

mm

Force kN

Colour

Length

Unit of Measure

m

WF-060-CG-250M

6

6.38

Green

250

Coil

WF-080-FG-125M

8

10.79

Green

125

Reel

WF-100-CG-250M

10

16.68

Green

250

Coil

WF-120-CG-250M

12

22.56

Green

250

Coil

WF-160-CG-250M

16

42.97

Green

250

Coil

WF-200-CG-250M

20

57.88

Green

250

Coil

WF-240-CG-250M

24

79.70

Green

250

Coil

BV_Polypropylene Rope Green_ DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Polypropylene Blue Rope

Polypropylene Blue Rope is a high strength rope with good shock absorption. It is a general-purpose rope which is strong and easy to handle.

Main Features: •

Tough, extremely strong and easy to work and knot

UV stabilised with excellent wearing properties and a high strength to weight ratio

Resistant against rot, most acids, alkalis and other chemicals

Low stretch and good knot retention

Floats on water, zero absorption

Suitable for a range of industrial areas, particularly marine, construction, mining, rural, commercial fishing and petroleum

Diameter

Maximum Breaking

mm

Force kN

WF-040-FB-300M

4

2.94

Blue

300

Reel

WF-060-FB-250M

6

6.87

Blue

250

Reel

WF-080-FB-250M

8

10.79

Blue

250

Reel

Bullivants Mfr No.

BV_Polypropylene Rope Blue_ DS032020

Colour

Length

Unit of Measure

m

1300 LIFTING

info@bullivants.com www.bullivants.com


Polypropylene Cable Hauling Rope Polypropylene Blue/Yellow Cable Hauling rope is used in the communication industry for pulling cable underground. Available in coil.

Main Features: •

Cable haul rope – Telstra approved for duct work

Will roll out without tangling or snagging

Floats on water, zero absorption

Resistant against rot and mildew

Easy to handle even in bad weather

Suitable for use in the communication industry – for pulling cable underground

Bullivants Mfr No.

Diameter

Maximum Breaking

mm

Force kN

WF-060-CB-400M-TEL

6

5.90

WF-060-CB-500M-TEL

6

5.90

BV_ PolypropBlueYellowCableHaulingRope_DS032020

Colour

Length

Unit of

m

Measure

Blue/ Yellow Fleck

400

Coil

Blue/Yellow Fleck

500

Coil

1300 LIFTING

info@bullivants.com www.bullivants.com


Polypropylene Marinetech Rope Polypropylene Marinetech rope is a high strength rope with excellent abrasion and shock absorption. Only available in coils.

Main Features: •

High strength, low abrasion fibre rope to reliably meet rigours of diverse applications

Fibre is a blend of compatible polyethylene and polypropylene fibres, specially processed, combining the beneficial features of each individual fibre

Low stretch and good knot retention

Floatable on water, zero absorption

UV resistant with excellent weathering properties

Bullivants Mfr No.

Diameter

Maximum Breaking

mm

Force kN

WFP-060-CG-250M

6

6.38

WFP-080-CG-250M

8

11.77

WFP-100-CG-250M

10

WFP-120-GY-250M

12

WFP-140-GY-250M WFP-160-GY-250M WFP-180-GY-250M

Length

Unit of

m

Measure

Green with Gold Fleck

250

Coil

Green with Gold Fleck

250

Coil

16.68

Green with Gold Fleck

250

Coil

21.58

Green with Gold Fleck

250

Coil

14

30.41

Green with Gold Fleck

250

Coil

16

42.97

Green with Gold Fleck

250

Coil

18

45.13

Green with Gold Fleck

250

Coil

WFP-240-CG-250M

24

73.58

Green with Gold Fleck

250

Coil

WFP-280-CG-250M

28

81.42

Green with Gold Fleck

250

Coil

WFP-320-CG-250M

32

98.10

Green with Gold Fleck

250

Coil

BV_Polypropylene Marinetech rope _DS022020

Colour

1300 LIFTING

info@bullivants.com www.bullivants.com


PPD Blueline Maxima Rope PPD Blueline Maxima rope is a high strength rope with excellent abrasion and shock absorption. Rope available in coils and reels on request.

Main Features: •

High strength and low abrasion fibre rope

Low stretch and good knot retention

Floats on water, zero absorption

Water resistant

Resistant against rot, most acids, alkalis and other chemicals

UV resistant with excellent weathering properties

Suitable for a range of industries, particularly marine, construction, mining, rural, commercial fishing and petroleum Bullivants Mfr No.

Diameter

Maximum Breaking

mm

Force kN

WJM-040-CW-250M

4

3.92

WJM-060-CW-250M

6

WJM-060-RW-250M

6

WJM-080-CW-250M

8

WJM-080-RW-125M

Colour

Length

Unit of

m

Measure

white with blue flecks

250

Coil

6.38

white with blue flecks

250

Coil

6.38

white with blue flecks

250

Reel

11.77

white with blue flecks

250

Coil

8

11.77

white with blue flecks

125

Reel

WJM-100-CW-250M

8

16.68

white with blue flecks

250

Coil

WJM-100-RW-125M

10

16.68

white with blue flecks

125

Reel

WJS-120-CW-250M

12

21.58

white with blue flecks

250

Coil

WJS-120-RW-125M

12

21.58

white with blue flecks

125

Reel

WJS-120-RW-250M

12

21.58

white with blue flecks

250

Reel

WJS-140-CW-250M

14

30.41

white with blue flecks

250

Coil

WJS-160-CW-125M

16

42.97

white with blue flecks

125

Coil

WJS-160-CW-250M

16

42.97

white with blue flecks

250

Coil Coil

WJS-180-CW-125M

18

45.13

white with blue flecks

125

WJS-200-CW-125M

20

50.03

white with blue flecks

125

Coil

WJS-240-CW-125M

24

73.58

white with blue flecks

125

Coil

WJS-240-CW-250M

24

73.58

white with blue flecks

250

Coil

BV_PPD Blueline Maxima Rope_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


PE Silver Rope Silver rope has superior strength and has a distinctively hairy appearance. Silver rope is versatile and strong, with exceptional handling properties due to its surface characteristics. Available in both reels and coils.

Main Features: •

Strong and versatile with excellent handling properties due to its surface characteristics

Easy to handle and knot

UV resistant with excellent weathering properties

Wear and abrasion resistant

Floats on water

Water resistant

Resistant to fungal attack

Suitable for industrial and marine applications where high resistance to abrasion is required

Bullivants Mfr No.

Diameter

Maximum Breaking

Length

Unit of Measure

mm

Force kN

m

WE-060-RW-125M

6

3.69

125

WE-060-CW-250M

6

3.69

250

Coil

WE-060-RW-250M

6

3.69

250

Reel

WE-060-RW-300M

6

3.69

300

Reel

WE-080-RW-200M

8

6.10

200

Reel

Reel

WE-080-CW-250M

8

6.10

250

Coil

WE-100-RW-125M

10

9.26

125

Reel

WE-100-CW-250M

10

9.26

250

Coil

WE-120-RW-125M

12

12.40

125

Reel

WE-120-CW-250M

12

12.40

250

Coil

WE-160-CW-125M

16

20.80

125

Coil

WE-160-CW-250M

16

20.80

250

Coil

WE-200-CW-250M

20

31.00

250

Coil

WE-240-CW-250M

24

43.10

250

Coil

BV_PE Silver Rope_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


100% Nylon Rope 100% Nylon rope is high stretch and performs well in shock loading situations. Rope available in coils and on reels on request.

Main Features: •

Excellent strength, extension and recovery characteristics

Easy to handle and knot

Resistant against rot and mildew

Ideal to use in applications where sudden shock is applied to the rope

Resistant to damage by most chemicals

3 stranded Rope

Loses strength when wet

Suitable for general and industrial applications, particularly marine and shipping where performance, high strength and good elasticity are required

Bullivants Mfr No.

Diameter

Maximum Breaking

Colour

Length

Unit of

mm

Force kN

m

Measure

WN-060-F-100M

6

7.35

White

100

Reel

WN-060-C-250M

6

7.35

White

250

Coil

WN-080-F-100M

8

8.83

White

100

Reel

WN-100-F-100M

10

20.40

White

100

Reel

WN-100-C-250M

10

20.40

White

250

Coil

WN-120-F-100M

12

29.40

White

100

Reel

WN-120-C-250M

12

29.40

White

250

Coil

WN-160-C-250M

16

52.00

White

250

Coil

WN-200-C-250M

20

63.77

White

250

Coil

BV_100%NylonRope_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Manila Rope Manila is the strongest of the natural fibre ropes. It's hard wearing, low stretch and resistance to weathering, fungal attack and moisture. This makes it ideal for tag lines, sailing & marine use, children’s playgrounds, gym ropes and barrier fencing rope.

Main Features: •

Hard wearing, low stretch, general purpose rope

Resistance to weathering and fungal attack and moisture

Stronger and softer feel than Sisal

Good abrasion resistance

Excellent knot tying ability

Can be spliced easily and can withstand repeated wetting and drying cycles

High saltwater resistance

Suitable for marine, shipping, mining and general industrial applications

Not to be used for lifting

Bullivants Mfr No.

Diameter

Maximum Breaking

Length

mm

Force kN

m

Unit of Measure

WM-060-C-250M

6

2.55

250

Coil

WM-080-C-250M

8

4.73

250

Coil

WM-100-C-250M

10

6.22

250

Coil

WM-120-C-250M

12

9.36

250

Coil

WM-160-C-250M

16

17.70

250

Coil

WM-180-C-250M

18

21.00

250

Coil

WM-200-C-250M

20

27.90

250

Coil

WM-220-C-250M

22

33.40

250

Coil

WM-240-C-250M

24

39.90

250

Coil

BV_Manila Rope_DS042020

1300 LIFTING

info@bullivants.com www.bullivants.com


Sisal Rope Sisal is a natural fibre rope. Due to its rough structure and high durability, Sisal makes a great choice as a general-purpose rope.

Main Features: •

Tough versatile fibre

Strong and economical

Abrasion resistant

Excellent resistance to sunlight

Little or no stretch

Suitable for truck tarping, mooring for small boats, small pulling slings, nets and various industries as a general-purpose rope

Not to be used for lifting

Bullivants Mfr No.

Diameter

Maximum Breaking

Length

mm

Force kN

m

Unit of Measure

WL-040-F-300M

4

1.07

300

Reel

WL-060-C-250M

6

2.55

250

Coil

WL-080-C-250M

8

4.73

250

Coil

WL-100-C-250M

10

6.22

250

Coil

WL-120-C-250M

12

9.36

250

Coil

WL-120-F-80M

12

9.36

80

Reel

WL-140-C-250M

14

12.60

250

Coil

WL-160-C-250M

16

17.70

250

Coil

WL-180-C-250M

18

21.00

250

Coil

WL-200-C-250M

20

27.90

250

Coil

WL-240-C-250M

24

39.90

250

Coil

WL-360-C-125M

36

85.30

125

Coil

BV_Sisal Rope_DS042020

1300 LIFTING

info@bullivants.com www.bullivants.com


Shackles Grade S

A shackle is used for interconnecting components in lifting, tensioning and staying systems. A shackle consists of a body, a removable pin and a locking device (where applicable). Grade S Shackles generally comply with Australian Standard 2741 with approximately twice the working load limit of Grade M Shackles. All Bullivants shackles are destruction and proof load tested prior to sale in the Australian market.

Features & Benefits: Alloy Steel material is more compact and lightweight than Grade M shackles

• •

6:1 Safety factor provides confidence in strength when used in the correct application

Galvanised finish for corrosion resistance for longer life span

Identification markings for traceability, manufacturers identification, grade of material, batch number and working load limit in accordance with AS2741 Australian Standards

Shackle Types: Bow Shackles: Can be used on either single or multi-leg applications. Screw pin closing method. Note: Screw pins need to be checked for tightness prior to each lift. Dee Shackles: Only used for single leg applications - never multi leg as the body and pin may distort. Screw pin closing method. Note: Screw pins need to be checked for tightness prior to each lift. Safety Pin Shackles: Preferable for long term or permanent applications or where the load may slide on the pin causing rotation to the pin. Also used on equipment that may vibrate to ensure pin does not become dislodged. Available in Bow and Dee shackle body styles

Bow Screw Shackle Specifications: Bullivants Mfr

WLL

Diameter

Diameter

Width

Size L

Internal

tonne

ød mm

øD mm

W mm

mm

øB mm

kg

WSS-0003-SC-B

0.33

5

6

10

22

15

0.02

WSS-0005-SC-B

0.50

6

8

12

29

20

0.06

WSS-0007-SC-B

0.75

8

10

13

31

21

0.11

WSS-0010-SC-B

1.00

10

11

18

37

26

0.15

No.

Weight

WSS-0015-SC-B

1.50

11

13

18

43

29

0.21

WSS-0020-SC-B

2.00

13

16

21

48

33

0.37

WSS-0032-SC-B

3.20

16

19

27

61

43

0.65

WSS-0047-SC-B

4.70

19

22

32

72

51

1.06

WSS-0065-SC-B

6.50

22

25

37

84

58

1.56

WSS-0085-SC-B

8.50

25

29

43

95

68

2.32

WSS-0095-SC-B

9.50

29

32

46

108

74

3.30

WSS-0120-SC-B

12.00

32

35

52

119

83

4.51

WSS-0135-SC-B

13.50

35

38

57

133

92

5.93

WSS-0170-SC-B

17.00

38

41

60

146

98

7.89

WSS-0250-SC-B

25.00

44

51

73

178

127

14.99

WSS-0350-SC-B

35.00

51

57

8m

197

146

18.85

WSS-0550-SC-B

55.00

63

70

105

267

180

38.0

BV_Shackles_DS052019

1300 LIFTING

info@bullivants.com www.bullivants.com


Shackles Grade S

Dee Screw Shackle Specifications: Bullivants Mfr No.

Size L

WLL

Diameter

Diameter

Width

Weight

mm

tonne

Ød mm

øD mm

W mm

kg

WSS-0005-SC-D

22

0.50

6

8

12

0.06

WSS-0007-SC-D

26

0.75

8

10

13

0.11

WSS-0010-SC-D

32

1.00

10

11

18

0.15

WSS-0015-SC-D

37

1.50

11

13

18

0.21

WSS-0020-SC-D

41

2.00

13

16

21

0.37

WSS-0032-SC-D

51

3.20

16

19

27

0.65

WSS-0047-SC-D

60

4.70

19

22

32

1.06

WSS-0065-SC-D

71

6.50

22

25

37

1.56

WSS-0085-SC-D

81

8.50

25

29

43

2.32 3.30

WSS-0095-SC-D

90

9.50

29

32

46

WSS-0120-SC-D

100

12.00

32

35

52

4.51

WSS-0135-SC-D

113

13.50

35

38

57

5.93

WSS-0170-SC-D

124

17.00

38

41

60

7.89

WSS-0250-SC-D

146

25.00

44

51

73

14.99

WSS-0350-SC-D

171

35.00

51

57

83

16.86

WSS-0550-SC-D

203

55.00

63

70

105

32.65

Weight

Bow Safety Pin Shackle Specifications: Bullivants Mfr No.

Size L

WLL

Diameter

Diameter

Width

mm

tonne

ød mm

øD mm

W mm

kg

48

2.00

13

16

21

0.44

WSS-0032-SA-B

61

3.25

16

19

27

0.79

WSS-0047-SA-B

72

4.75

19

22

32

1.06

WSS-0065-SA-B

84

6.50

22

25

37

1.88

WSS-0085-SA-B

95

8.50

25

29

43

2.78

WSS-0095-SA-B

108

9.50

29

32

46

3.87

WSS-0120-SA-B

119

12.00

32

35

52

5.26 6.94

WSS-0020-SA-B

WSS-0135-SA-B

133

13.50

35

38

57

WSS-0170-SA-B

146

17.00

38

41

60

8.79

WSS-0250-SA-B

178

25.00

44

51

73

14.99

WSS-0350-SA-B

197

35.00

51

59

83

20.65

WSS-0425-SA-B

222

42.50

59

63

95

29.10

WSS-0550-SA-B

167

55.00

63

70

105

41.05

WSS-0850-SA-B

330

85.00

76

83

127

62.24

WSS-1200-SA-B

381

120.00

89

95

146

110.00

BV_Shackles_DS052019

1300 LIFTING

info@bullivants.com www.bullivants.com


Shackles Grade S

What do the markings mean? Identification markings for traceability, manufacturer’s identification, size, grade of material, batch number and working load limit in accordance with AS2741 Australian Standards

BV_Shackles_DS052019

1300 LIFTING

info@bullivants.com www.bullivants.com


Superbuckles Jaw & Jaw Galvanised Main Features: •

Hot dipped galvanised steel

End fittings are quenched and tempered, bodies heat treated by normalizing

Turnbuckles recommended for straight on in-line pull only

Proof load 2.5 x WLL

Ultimate load 5 x WLL

Specifications: Bullivants Mfr No.

Dimensions mm Thread Dia

WLL

& take up

tonne

A

B

E

G

Unit

J

K

M

N

Open

Closed

Open

Closed

BB

Weight kg

inch WTB-T-100-JJ-G-6INT

3/8 x 6

0.5

9.65

13.7

54

22

410

258

441

289

152

0.37

WTB-T-127-JJ-G-12INT

1/2 x 12

1.0

12.7

16.5

70

27

775

444

813

483

305

1.09

WTB-T-158-JJ-G-12INT

5/8 x 12

1.5

16

20

89

33

814

477

867

530

305

1.77

WTB-T-190-JJ-G-12INT

3/4 x 12

2.3

19

23.8

106

38

850

508

917

574

305

2.8

WTB-T-222-JJ-G-12INT

7/8 x 12

3.2

22

28.7

123

44

890

542

967

618

305

3.7

WTB-T-254-JJ-G-12INT

1 x 12

4.5

25

34

140

52

933

577

1017

662

305

5.9

WTB-T-317-JJ-G-12INT

1 1/4 x 12

6.9

32

44.5

183

71

1012

643

1118

750

305

9.3

Turnbuckle Jaw & Jaw Galvanised_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Superbuckles Eye & Eye Galvanised Main Features: •

Hot dipped galvanised steel

End fittings are quenched and tempered, bodies heat treated by normalizing

Turnbuckles recommended for straight on in-line pull only

Proof load 2.5 x WLL

Ultimate load 5 x WLL

Specifications: Bullivants Mfr No.

Dimensions mm Thread

WLL

Dia &

tonne

A

J

K

M

N

R

S

X

BB

Close

take up

Weight kg

d

inch WTB-T-190-EE-G-12INT

3/4 x 12

2.3

19.1

911

568

943

600

53

25.4

119

304

WTB-T-222-EE-G-12INT

7/8 x 12

3.27

22.4

942

592

980

630

60.4

31.7

130

304

3.27

WTB-T-317-EE-G-12INT

1-1/4 x 12

6.89

31.8

1087

719

1145

776

90.5

46

196

304

8.62

Superbuckles EyeEye Galvanised_DS032020

1300 LIFTING

2.49

info@bullivants.com www.bullivants.com


Superbuckles Jaw & Eye Galvanised Main Features: •

Hot dipped galvanised steel

End fittings are quenched and tempered, bodies heat treated by normalizing

Turnbuckles recommended for straight on in-line pull only

Proof load 2.5 x WLL

Ultimate load 5 x WLL

Specifications: Bullivants Mfr No.

Dimensions mm Thread

WLL

Dia & take

tonne

A

B

E

G

Closed

Unit

J

K

M

N

Open

Closed

Open

Closed

1407

949

1518

1061

R

S

X

BB

Weight

457

24.4

Closed

kg

up inch WTB-T-444-

1-3/4 x 18

12.7

44.5

66

239

86

117

60.4

254

JE-G-18INT

Superbuckles JawEye Galvanised_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Concrete Lifting Clutch 1.3 Tonne – 10 Tonne Main Features: •

Compatible with all lifting anchor types

Available in a wide range of capacities

Manufactured high strength Alloy Steel

Concrete lifting clutches must be load tested every 12 months in accordance with Australian Standards

Manufacturer and working load markings in accordance with Australian Standards

Surface finish: blue powder coat

ZERO HARM Product Features: •

Designed to not spontaneously disengage whilst the system is under load at any orientation when installed correctly

Proof load tested accordance with the AS3850

Designed and manufactured with a 5:1 safety factor

Unique serial number and test certificate supplied with each item

Bullivants Mfr No.

Blackwoods

WLL

A

B

C

F

Part No.

Unit Weight

WCLE-013-STD-RIG

0413 7961

1.3 tonne

148mm

75mm

33mm

20mm

0.87kg

WCLE-025-STD-RIG

0413 7978

2.5 tonne

198mm

91.5mm

41mm

25mm

1.5kg

WCLE-050-STD-RIG

0413 7995

5 tonne

238mm

118mm

57mm

37mm

3.1g

WCLE-100-STD-RIG

0413 8012

10 tonne

339mm

160mm

73mm

50mm

9.0kg

Technical Drawings:

BV_ConcreteLilftingClutch_DS072019

1300 LIFTING

info@bullivants.com www.bullivants.com


Weld On Lifting Point 2 - 6.7 Tonne

Weld on Lifting Points are manufactured in Australia using only heat certified Australian Steel. The Working Load Limit and Batch identification is clearly marked on both the Loop and Lug.

Main Features: • Multi-directional loading • Forged from fully tested and certified steel • Ideal for lifting and lashing • Welding must always be carried out by a qualified welder under AS 1554.1:2014 • Supplied with welding instructions • Complies with AS 3776

Specifications: Bullivants Mfr No.

WLL

A

B

C

D

E

F

G

H

tonne

mm

mm

mm

mm

mm

mm

mm

mm

WRL-0200-NS-T-BUL

2.0

40

82

34

68

28

14

14

92

WRL-0400-NS-T-BUL

4.0

53

104

46

90

33

18

18

116

WRL-0670-NS-T-BUL

6.7

68

138

60

116

45

23

23

155

BV_WeldOnLiftingPoint_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


De-Centred Lifting Point DLP Metric – Standard & Long Thread Length Main Features: •

DLP has a hexagon bolt (RFID prepared) to disassemble/assemble with a wrench easily

“Stay-up” function for easy on-hooking when there is limited space

Ideal for narrow spaces, such as corners or edge position, angular lifts, tilting under load, multiple part lift

Identification markings for traceability, Working Load Limit, mounting torque and manufacturer’s identification

Safety factor 4:1

Bolt, nut and washer according to: ISO 898-1 Class 10.9

Specifications – Standard Thread Length: Bullivants Mfr No.

M

B

C

D

E

F

G

L

L1

X

Y

Z

Weight

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg 0.3

WRB-0035-M08-ST-DLP

M8

35

48

10

39

14

10

13

78

30

55

26

WRB-0065-M10-ST-DLP

M10

35

48

10

39

14

10

13

78

30

55

26

0.3

WRB-0100-M12-ST-DLP

M12

35

48

12

51

20

14

23

91

44

59

32

0.5

WRB-0180-M16-ST-DLP

M16

35

48

12

51

20

14

23

91

44

59

32

0.5

WRB-0260-M20-ST-DLP

M20

54

88

18

71

28

18

34

145

58

90

48

1.6

WRB-0410-M24-ST-DLP

M24

54

88

18

71

28

18

34

145

58

90

48

1.7

WRB-0500-M30-ST-DLP

M30

82

94

26

104

39

27

53

182

88

122

75

5

WRB-0700-M36-ST-DLP

M36

82

94

26

104

39

27

53

182

88

122

75

5.2

WRB-1500-M42-ST-DLP

M42

100

103

36

136

54

34

73

216

113

156

110

11.6

WRB-2000-M48-ST-DLP

M48

100

103

36

136

54

34

73

216

113

156

110

11.9

Gunnebo DLP_MetriclThread_DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


De-Centred Lifting Point DLP Metric – Standard & Long Thread Length Specifications – Long Thread Length: Bullivants Mfr No.

M

B

C

D

E

F

G

L1

L2

X

Y

Z

Weight

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

WRB-0035-M08-LB-DLP

M8

35

48

10

39

14

10

78

97.5

30

55

26

0.31

WRB-0065-M10-LB-DLP

M10

35

48

10

39

14

10

78

97.5

30

55

26

0.34

WRB-0100-M12-LB-DLP

M12

35

48

12

51

20

14

91

118

44

59

32

0.62

WRB-0180-M16-LB-DLP

M16

35

48

12

51

20

14

91

158

44

59

32

0.8

WRB-0260-M20-LB-DLP

M20

54

88

18

71

28

18

145

198

58

90

48

2.15 2.59

WRB-0410-M24-LB-DLP

M24

54

88

18

71

28

18

145

238

58

90

48

WRB-0500-M30-LB-DLP

M30

82

94

26

104

39

27

182

295

88

122

75

6.71

WRB-0700-M36-LB-DLP

M36

82

94

26

104

39

27

182

295

88

122

75

7.68

WRB-1500-M42-LB-DLP

M42

100

103

36

136

54

34

216

293

113

156

110

14.67

WRB-2000-M48-LB-DLP

M48

100

103

36

136

54

34

216

293

113

156

110

16.14

Technical Data:

Symmetric Load (tonnes) No. of legs

1

2

2 Symmetric

3 & 4 Symmetric Tightening Torque

Angle β

0°< β < 90°

0°< β < 90°

0-45°

45-60°

0-45°

45-60°

Nm

0.70

0.5

0.35

0.7

0.5

10

WRB-0065-M10-ST-DLP(L)

0.65

1.30

0.9

0.65

1.4

1.0

15

WRB-0100-M12-ST-DLP(L)

1.0

2.0

1.4

1.0

2.1

1..5

27 60

WRB-0035-M08-ST-DLP(L)

0.35

WRB-0180-M16-ST-DLP(L)

1.8

3.6

2.5

1.8

3.7

2.7

WRB-0260-M20-ST-DLP(L)

2.6

5.2

3.5

2.6

5.4

3.9

90

WRB-0410-M24-ST-DLP(L)

4.1

8.2

5.7

4.1

8.6

6.1

135

WRB-0500-M30-ST-DLP(L)

5.0

10.0

7.0

5.0

10.5

7.5

270

WRB-0700-M36-ST-DLP(L)

7.0

14.0

9.8

7.0

14.7

10.5

320

WRB-1500-M42-ST-DLP(L)

15.0

30.0

21.0

15.0

31.5

22.5

600

WRB-2000-M48-ST-DLP(L)

20.0

40.0

28.0

20.0

42.0

30.0

800

* Safety factor 4: 1

Gunnebo DLP_MetriclThread_DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


De-Centred Lifting Point (DLP) Imperial – Standard & Long Thread Length Main Features: •

DLP has a hexagon bolt (RFID prepared) to disassemble/assemble with a wrench easily

“Stay-up” function for easy on-hooking when there is limited space

Ideal for narrow spaces, such as corners or edge position, angular lifts,

Identification markings for traceability, Working Load Limit, mounting

tilting under load, multiple part lift torque and manufacturer’s identification •

Safety factor 4:1

Bolt, nut and washer according to: ISO 898-1 Class 10.9

Specifications – Standard Thread Length: M

B

C

D

E

F

G

L

L1

X

Y

Z

Weight

Inch

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

WRB-0035-079-CP-Z102308

5/16

35

48

10

39

14

10

13

78

30

55

26

0.3

WRB-0060-095-CP-Z102310

3/8

35

48

10

39

14

10

13

78

30

55

26

0.3

WRB-0100-127-CP-Z102312

1/2

35

48

12

51

20

14

23

91

44

59

32

0.5

WRB-0160-158-CP-Z102316

5/8

35

48

12

51

20

14

23

91

44

59

32

0.5

WRB-0220-190-CP-Z102320

3/4

54

88

18

71

28

18

34

145

58

90

48

1.6

WRB-0260-222-CP-Z102321

7/8

54

88

18

71

28

18

34

145

58

90

48

1.7

WRB-0410-254-CP-Z102324

1

54

88

18

71

28

18

34

145

58

90

48

1.7

WRB-0500-317-CP-Z102330

1- 1/4

82

94

26

104

39

27

53

182

88

122

75

5.5

WRB-0700-381-CP-Z102336

1- 1/2

82

94

26

104

39

27

53

182

88

122

75

5.7

WRB-1500-444-CP-Z102342

1- 3/4

100

103

36

136

54

34

73

216

113

156

110

12.3

WRB-2000-508-CP-Z102348

2

100

103

36

136

54

34

73

216

113

156

110

12.6

Bullivants Mfr No.

Gunnebo DLP_ImperialThread_DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


De-Centred Lifting Point (DLP) Imperial – Standard & Long Thread Length Specifications – Long Thread Length: M

B

C

D

E

F

G

L1

L2

X

Y

Z

Weight

Inch

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

WRB-0035-079-CP-Z102308L

5/16

35

48

10

39

14

10

78

97.5

30

55

26

0.3

WRB-0060-095-CP-Z102310L

3/8

35

48

10

39

14

10

78

97.5

30

55

26

0.3

WRB-0100-127-CP-Z102312L

1/2

35

48

12

51

20

14

91

118

44

59

32

0.5

WRB-0160-158-CP-Z102316L

5/8

35

48

12

51

20

14

91

158

44

59

32

0.5

WRB-0220-190-CP-Z102320L

3/4

54

88

18

71

28

18

145

198

58

90

48

1.6

WRB-0260-222-CP-Z102321L

7/8

54

88

18

71

28

18

145

238

58

90

48

1.7

WRB-0410-254-CP-Z102324L

1

54

88

18

71

28

18

145

238

58

90

48

1.7

WRB-0500-317-CP-Z102330L

1- 1/4

82

94

26

104

39

27

182

295

88

122

75

5.5

WRB-0700-381-CP-Z102336L

1- 1/2

82

94

26

104

39

27

182

295

88

122

75

5.7

WRB-1500-444-CP-Z102342L

1- 3/4

100

103

36

136

54

37

216

293

113

156

110

12.3

36

136

54

34

216

293

113

156

110

12.6

Bullivants Mfr No.

WRB-2000-508-CP-Z102348L

2

100

103

Technical Data:

Symmetric Load tonnes No. of legs

1

2

2 Symmetric

3&4 Symmetric Tightening Torque

Angle β

0°< β < 90°

0°< β < 90°

0-45°

45-60°

0-45°

45-60°

0.35

0.70

0.5

0.35

0.7

0.5

7

0.60

1.20

0.8

0.60

1.3

1.0

11

WRB-0100-127-CP-Z102312(L)

1.0

2.0

1.4

1.0

2.1

1.5

20

WRB-0160-158-CP-Z102316(L)

1.6

3.2

2.2

1.6

3.3

2.4

44

WRB-0220-190-CP-Z102320(L)

2.2

4.4

3.0

2.2

4.6

3.3

66

WRB-0260-222-CP-Z102321(L)

2.6

5.2

3.5

2.6

5.4

3.9

66

WRB-0410-254-CP-Z102324(L)

4.1

8.2

5.7

4.1

8.6

6.1

100

WRB-0500-317-CP-Z102330(L)

5.0

10.0

7.0

5.0

10.5

7.5

200

WRB-0700-381-CP-Z102336(L)

7.0

14.0

9.8

7.0

14.7

10.5

236

WRB-1500-444-CP-Z102342(L)

15.0

30.0

21.0

15.0

31.5

22.5

440

WRB-2000-508-CP-Z102348(L)

20.0

40.0

28.0

20.0

42.0

30.0

590

WRB-0035-079-CP-Z102308(L) WRB-0060-095-CP-Z102310(L)

ft. Lbs

* Safety factor 4: 1

Gunnebo DLP_ImperialThread_DS102019

1300 LIFTING

info@bullivants.com www.bullivants.com


Link Brackets Link bracket assemblies are usually used to lift components during maintenance and repairs of equipment.

Main Features: • Requires less clearance than standard eye bolts • Allows for faster and easier positioning of swing gear/ bearing • Bolt Grade 8.8 • Complies with ANSI/ASME B30.9.1984

WLIB-120-R-LT081301

WLIB-160-R-LT081302

WLIB-240-R-LT081303

Specifications: Bullivants Mfr No.

Minimum

WLL

Mass

A

B

E

Diameter

tonne

kg

mm

mm

mm

Bolt mm WLIB-120-R-LT081301

12

1.02

0.19

43

27

7.5

WLIB-160-R-LT081302

16

1.82

0.223

43

27

8.5

WLIB-240-R-LT081303

24

4.08

0.99

43

26.5

16

BV_Link Bracket_DS012020

1300 LIFTING

info@bullivants.com www.bullivants.com


Grade 100 Chain Sling Assemblies Bullivants Chain Slings provide various use for industrial and construction applications. These are temperature resistant, and strong enough to handle a wide array of loading conditions.

Features & Benefits: • Shortening Hooks are supplied with the chain sling allowing versatility in the length required for the lifting application • Supplied with 100% rated, Grade 100, grab hooks, self-locking hooks and Gunnebo chain • 25% stronger than Grade 80 allowing the chain size to reduce to lift the same job • High impact resistance and durability when compared to Grade 80 • High abrasion resistance Alloy Steel suitable for lifting objects with sharp edges which are known to damage other sling types • Very high chemical resistance for extended product life in harsh environments • Full working load capacity up to 200°C enables use in hot work environments (200-300ºC at 10% reduction in WLL & 300-400ºC at 25% reduction in WLL) • Reeved slings and basket slings in a two leg configuration have a maximum angle of 60° • Determination of the angle of the multi leg sling is the largest included angle at the apex of the configuration • Complies with AS 3775.2:2014 • Made in Australia

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Self-Locking Hook to prevent accidental load release • Hi Visibility Colour contrast connecting points • Each chain sling is supplied with safe use instructions • Each and every chain sling is load tested in accordance with Australian Standards and supplied with a NATA certificate

BV_G100_ChainSlings_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Grade 100 Chain Sling Assemblies Single Leg Chain Slings Bullivants Mfr No.

Chain Size

Length

mm

m

WLL @ 60° tonne

WCS-06-1-010-BVE

6

1

1.5

WCS-06-1-020-BVE

6

2

1.5

WCS-06-1-030-BVE

6

3

1.5

WCS-06-1-040-BVE

6

4

1.5

WCS-08-1-010-BVE

8

1

2.5

WCS-08-1-020-BVE

8

2

2.5

WCS-08-1-030-BVE

8

3

2.5

WCS-08-1-040-BVE

8

4

2.5

WCS-08-1-050-BVE

8

5

2.5

WCS-08-1-060-BVE

8

6

2.5

WCS-10-1-010-BVE

10

1

4.0

WCS-10-1-015-BVE

10

1.5

4.0

WCS-10-1-020-BVE

10

2

4.0

WCS-10-1-030-BVE

10

3

4.0

WCS-10-1-040-BVE

10

4

4.0

WCS-10-1-050-BVE

10

5

4.0

WCS-10-1-060-BVE

10

6

4.0

WCS-13-1-010-BVE

13

1

6.7

WCS-13-1-020-BVE

13

2

6.7

WCS-13-1-030-BVE

13

3

6.7

WCS-13-1-040-BVE

13

4

6.7

WCS-13-1-050-BVE

13

5

6.7

WCS-13-1-060-BVE

13

6

6.7

WCS-16-1-020-BVE

16

2

10.0

WSC-16-1-030-BVE

16

3

10.0

WSC-16-1-040-BVE

16

4

10.0

Master Link

Chain Connecting Link

Eye Type Grab Hook

Self-Locking Hook

BV_G100_ChainSlings_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Grade 100 Chain Sling Assemblies 2 Leg Chain Slings Bullivants Mfr No.

Chain Size

Length

mm

m

WLL @ 60° tonne

WCS-06-2-010-BVE

6

1

2.6 tonne

WCS-06-2-020-BVE

6

2

2.6 tonne

WCS-06-2-030-BVE

6

3

2.6 tonne

WCS-06-2-040-BVE

6

4

2.6 tonne

WCS-06-2-060-BVE

6

6

2.6 tonne

WCS-08-2-010-BVE

8

1

4.3 tonne

WCS-08-2-015-BVE

8

1.5

4.3 tonne

WCS-08-2-020-BVE

8

2

4.3 tonne

WCS-08-2-030-BVE

8

3

4.3 tonne

WCS-08-2-040-BVE

8

4

4.3 tonne

WCS-08-2-050-BVE

8

5

4.3 tonne

WCS-08-2-060-BVE

8

6

4.3 tonne

WCS-08-2-080-BVE

8

8

4.3 tonne

WCS-10-2-010-BVE

10

1

6.9 tonne

WCS-10-2-020-BVE

10

2

6.9 tonne

WCS-10-2-030-BVE

10

3

6.9 tonne

WCS-10-2-040-BVE

10

4

6.9 tonne

WCS-10-2-050-BVE

10

5

6.9 tonne

WCS-10-2-060-BVE

10

6

6.9 tonne

WCS-10-2-080-BVE

10

8

6.9 tonne

WCS-10-2-100-BVE

10

10

6.9 tonne

WCS-13-2-010-BVE

13

1

11.6 tonne

WCS-13-2-020-BVE

13

2

11.6 tonne

WCS-13-2-030-BVE

13

3

11.6 tonne

WCS-13-2-040-BVE

13

4

11.6 tonne

WCS-13-2-050-BVE

13

5

11.6 tonne

WCS-13-2-060-BVE

13

6

11.6 tonne

WCS-13-2-080-BVE

13

8

11.6 tonne

WCS-16-2-020-BVE

16

2

17.3 tonne

WCS-16-2-030-BVE

16

3

17.3 tonne

WCS-16-2-040-BVE

16

4

17.3 tonne

WCS-16-2-050-BVE

16

5

17.3 tonne

WCS-16-2-060-BVE

16

6

17.3 tonne

WCS-16-2-080-BVE

16

8

17.3 tonne

BV_G100_ChainSlings_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Grade 100 Chain Sling Assemblies 4 Leg Chain Slings Bullivants Mfr No.

Chain Size

Length

mm

m

WLL @ 60° tonne

WCS-06-4-020-BVE

6

2

2.4

WCS-06-4-030-BVE

6

3

2.4

WCS-06-4-060-BVE

6

6

2.4

WCS-08-4-010-BVE

8

1

4.3

WCS-08-4-020-BVE

8

2

4.3

WCS-08-4-030-BVE

8

3

4.3

WCS-08-4-040-BVE

8

4

4.3

WCS-08-4-060-BVE

8

6

4.3

WCS-10-4-010-BVE

10

1

6.9

WCS-10-4-020-BVE

10

2

6.9

WCS-10-4-030-BVE

10

3

6.9

WCS-10-4-040-BVE

10

4

6.9

WCS-10-4-060-BVE

10

6

6.9

WCS-13-4-020-BVE

13

2

11.2

WCS-13-4-030-BVE

13

3

11.2

WCS-13-4-040-BVE

13

4

11.2

WCS-13-4-050-BVE

13

5

11.2

WCS-13-4-060-BVE

13

6

11.2

WCS-13-4-080-BVE

13

8

11.2

WCS-16-4-040-BVE

16

4

17.3

WCS-16-4-050-BVE

16

5

17.3

WCS-16-4-060-BVE

16

6

17.3

BV_G100_ChainSlings_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Grade 100 Chain Sling Assemblies Technical: All multi-leg slings exert a horizontal component of force, which increases as the included angle becomes greater. DO NOT use a sling if the included angle exceeds 120ยบ, as beyond this point the forces in the legs drastically increase, as indicated in the diagram

BV_G100_ChainSlings_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Connecting Links Main Features: • For use with Grade 100 chain • 25% Stronger than Grade 80 equivalent

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Hi Visibility Colour contrast connecting points • Individually proof load tested to 2 x WLL • Fatigue tested at 1.5 x WLL for 20,000 cycles • 100% Magnaflux detection • All load pins are 100% individually inspected and tested

Specifications: Bullivants Mfr No.

WLL

H +/-1

A +/-1

K +/-1

L +/-2.5

tonne

mm

mm

mm

mm

kg

1.4

7.6

14.0

44.5

60.0

0.08

WCUP-080-BVE-G100

2.5

10.0

18.5

61.5

84.5

0.18

WCUP-100-BVE-G100

4.0

12.6

23.0

72.0

97.2

0.34

WCUP-130-BVE-G100

6.7

16.8

27.5

89.0

127.0

0.68

WCUP-160-BVE-G100

10.0

21.0

33.5

103.0

145.0

1.22

WCUP-060-BVE-G100

BV_G100ConnectingLinks_DS032020

1300 LIFTING

Weight

info@bullivants.com www.bullivants.com


G100 Eye Type Bearing Swivel Self Locking Hook Main Features: • Ball bearing allows hook to swivel under load • Latch closes automatically under load • Swivel allows load to easily rotate • 100% Proof load tested • Allows attachment to chain, wire rope, or synthetic slings

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Self-Locking Hook to prevent accidental load release • Hi Visibility Colour contrast connecting points

Bullivants Mfr No.

Weight

WLL

A±1.

B±1.

C±2

D±2

E±2.5

N±1

H±3

K±3

L ±5

W ±3

kg

tonne

5

5

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

WLSH-060-BV-G100

0.6

1.4

11.5

13

37

27

30

15

32

163

196.5

70

WLSH-080-BV-G100

1.1

2.5

13

15

41

35.5

40

20

39

202

243

90

WLSH-100-BV-G100

2.0

4.0

15.5

17.5

48

45

48

26

48

244

289

108

WLSH-130-BV-G100

4.0

6.7

17

19

55

52.5

63

32.5

57

292

351

138

WLSH-160-BV-G100

6.8

10

21.5

26

62

62

75

.38

62

346

422

170

BV_G100 Eye Type Bearing Swivel Self Locking Hook_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Clevis Self Locking Hook Main Features: • Clevis pin for direct connection to chain without connecting link • Low profile trigger to prevent snagging and damage • 25% Stronger than Grade 80 equivalent • Individually tested to 2 x WLL • Complies with AS 3776:2015

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Self-Locking Hook to prevent accidental load release • Hi Visibility Colour contrast connecting points

Specifications: Bullivants Mfr No.

Chain

WLL

A

B

C

D

E

F

G

H

Weight

Size

tonne

mm

mm

mm

mm

mm

mm

mm

mm

kg

1.4

7

98

22

75

135

22

18

28

0.586

25

86

164

23

23

33

0.924

206

29

27

45

1.725

mm

WLLH-C-060-BVE-G100

6

WLLH-C-080-BVE-G100

8

2.5

9

120

WLLH-C-100-BVE-G100

10

4.0

13

150

34

111

WLLH-C-130-BVE-G100

13

6.7

15

185

40

136

253

38

34

52

3.330

WLLH-C-160-BVE-G100

16

10.0

17

215

53

173

300

41

43

64

6.320

BV_G100_Clevis Self Locking Hook_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Coupling Link Main Features: • Suitable for joining chain to components • 25% Stronger than Grade 80 equivalent • Individually tested to 2 x WLL • Complies with AS 3776:2015

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Hi Visibility Colour contrast connecting points

Specifications: Bullivants Mfr No.

WCUP-060-BVE-G100

Chain Size

WLL

A

B

C

D

E

Weight

mm

tonne

mm

mm

mm

mm

mm

kg

6

1.4

7

7.3

17.5

16

44

0.09

23

56

0.176

WCUP-080-BVE-G100

8

2.5

8.5

10.5

21.3

WCUP-100-BVE-G100

10

4.0

11.3

14

25.8

29

68

0.33

WCUP-130-BVE-G100

13

6.7

15

17

32

34

82

0.652

WCUP-160-BVE-G100

16

10.0

17

21

40.4

41

104

1.23

BV_G100 Coupling Link_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Eye Type Self Locking Hook Main Features: •

Eye type for use with connecting link

Low profile trigger to prevent snagging and damage

25% Stronger than Grade 80 equivalent

Individually tested to 2 x WLL

Complies with AS 3776:2015

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Self-Locking Hook to prevent accidental load release • Hi Visibility Colour contrast connecting points

Bullivants Mfr No.

Chain

WLL

A

B

C

D

E

F

G

H

Weight

Size

tonne

mm

mm

mm

mm

mm

mm

mm

mm

kg

1.4

22

107

22

75

138

10

18

28

0.514 0.860

mm

WLLH-AE-060-BVE-G100

6

WLLH-AE-080-BVE-G100

8

2.5

24

133

25

86

170

11

23

33

WLLH-AE-100-BVE-G100

10

4.0

32

167

34

111

218

13

27

45

1.623

WLLH-AE-130-BVE-G100

13

6.7

39

208

40

136

269

17

34

52

3.130

WLLH-AE-160-BVE-G100

16

10.0

49

254

53

173

330

23

43

64

6.192

BV_G100_Eye Type Self Locking Hook_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Eye Type Sling Hook Main Features: •

Eye type for use with connecting link

Fitted with spring loaded latch

25% Stronger than Grade 80 equivalent

Individually tested to 2 x WLL

Complies with AS 3776:2015

ZERO HARM Product Features: • Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries • Hi Visibility Colour contrast connecting points

Specifications: Bullivants Mfr No.

Chain

WLL

A

B

C

D

E

F

G

H

Weight

size

tonne

mm

mm

mm

mm

mm

mm

mm

mm

kg 0.860

mm

WSLH-AE-080-BVE-G100

8

2.5

24

133

25

86

170

11

23

33

WSLH-AE-100-BVE-G100

10

4.0

32

167

34

111

218

13

27

45

1.623

WSLH-AE-130-BVE-G100

13

6.7

39

208

40

136

269

17

34

52

3.130

WSLH-AE-160-BVE-G100

16

10.0

49

254

53

173

330

23

43

64

6.192

BV_G100 Eye Type Sling Hook_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


G100 Clevis Grab Hook Main Features: •

Clevis pin for direct connection to chain without connecting link

No reduction in WLL due to supporting lugs

25% Stronger than Grade 80 equivalent

Individually tested to 2 x WLL

Complies with AS 3776:2015

ZERO HARM Product Features: •

Grade 100 makes the process lighter and reduces the risk of potential manual handling injuries

Hi Visibility Colour contrast connecting points

Bullivants Mfr No.

Chain

WLL

A

B

D

E

F

G

H

I

J

Weight

Size

tonne

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

39.3

9.3

96.4

28

57.8

35

9.5

22.5

10

0.39

mm

WGRH-C-080-BVE-G100

8

2.5

WGRH-C-100-BVE-G100

10

4.0

48

12

128

36.4

80

47

12

28

12.5

0.9

WGRH-C-130-BVE-G100

13

6.7

57.5

15

158

41.7

94

57.5

15

36

16

1.58

WGRH-C-160-BVE-G100

16

10.0

74

19

188.4

47.6

114.9

65

19.5

40

20

2.4

BV_G100 Clevis Grab Hook_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Long Link Chain - Gold Main Features: •

Manufactured from carbon steel

Proof tested to at least twice the maximum load recommended for normal use

Suitable for roller door applications

Not suitable for lifting applications

Specifications: Bullivants Mfr No.

Maximum Load

Chain Size

S

F

R

Weight

kg

mm

mm

mm

mm

kg

190

5

5.0

21.6

29.4

0.44

WCLL-050D

Tolerances: Diameter (S) ± 0.05 Outside Width (F) ± 0.3 Inside length (R) ± 0.4

BV_Long Link Chain Gold_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Stainless Steel Chain Main Features: •

Extremely resistant to corrosion where salt water, acid or alkaline solutions are factors

Not suitable for lifting applications

Regular Link Bullivants Mfr No.

Grade

S mm

Tolerance

R mm

Tolerance

F mm

Tolerance

Chain Size WCSR-0406

316

4

±0.08

19

±0.3

15

±0.3

WCSR-0604

304

6

±0.10

27

±0.5

22.5

±0.4

WCSR-0606

316

6

±0.10

27

±0.5

22.5

±0.4

WCSR-0804

304

8

±0.10

32

±0.6

30

±0.5

WCSR-0806

316

8

±0.10

32

±0.6

30

±0.5

WCSR-1004

304

10

±0.10

41

±0.7

38

±0.7

WCSR-1006

316

10

±0.10

41

±0.7

38

±0.7

S mm Chain Size

Tolerance

R mm

Tolerance

F mm

Tolerance

WCSS-0606

6

±0.10

18.5

0.4

-0.2

20

WCSS-0806

8

±0.10

24

0.4

-0.2

26

WCSS-1004

10

±0.10

28

0.4

-0.3

34

±0.7

WCSS-1006

10

±0.10

28

0.4

-0.3

34

±0.7

Short Link – Grade 316 Bullivants Mfr No.

Stainless Steel Chain_DS032020

1300 LIFTING

±0.4 0.6

-0.4

info@bullivants.com www.bullivants.com


Synthetic Slings Round Slings Main Features: • Heavy Duty outer casing for extra resistance to damage • Each sling supplied with test certificate • Colour coded to meet international lifting standards • Suitable for use with cranes, hoists and blocks • Complies with AS 4497.1:1997

Bullivants Mfr No.

Colour

Length

WLL

m

tonne

Bullivants Mfr No.

Colour

Length

WLL tonne

WRS-010-005-E

Violet

0.5

1 .0

WRS-050-010-E

Red

1.0

5.0

WRS-010-010-E

Violet

1.0

1 .0

WRS-050-020-E

Red

2.0

5.0

WRS-010-020-E

Violet

2.0

1.0

WRS-050-030-E

Red

3.0

5.0

WRS-010-030-E

Violet

3.0

1.0

WRS-050-040-E

Red

4.0

5.0

WRS-010-040-E

Violet

4.0

1.0

WRS-050-050-E

Red

5.0

5.0

WRS-010-050-E

Violet

5.0

1.0

WRS-050-060-E

Red

6.0

5.0

WRS-010-060-E

Violet

6.0

1.0

WRS-060-020-E

Brown

2.0

6.0

WRS-020-010-E

Green

1.0

2.0

WRS-060-030-E

Brown

3.0

6.0

WRS-020-020-E

Green

2.0

2.0

WRS-060-040-E

Brown

4.0

6.0

WRS-020-030-E

Green

3.0

2.0

WRS-060-050-E

Brown

5.0

6.0

WRS-020-040-E

Green

4.0

2.0

WRS-060-060-E

Brown

6.0

6.0

WRS-020-050-E

Green

5.0

2.0

WRS-080-030-E

Blue

3.0

8.0

WRS-020-060-E

Green

6.0

2.0

WRS-080-040-E

Blue

4.0

8.0

WRS-030-010-E

Yellow

1.0

3.0

WRS-080-060-E

Blue

6.0

8.0

WRS-030-020-E

Yellow

2.0

3.0

WRS-100-030-E

Orange

3.0

10.0

WRS-030-030-E

Yellow

3.0

3.0

WRS-100-040-E

Orange

4.0

10.0

WRS-030-040-E

Yellow

4.0

3.0

WRS-100-050-E

Orange

5.0

10.0

WRS-030-050-E

Yellow

5.0

3.0

WRS-100-060-E

Orange

6.0

10.0

WRS-030-060-E

Yellow

6.0

3.0

WRS-100-080-E

Orange

8.0

10.0

WRS-040-010-E

Grey

1.0

4.0

WRS-100-100-E

Orange

10.0

10.0

WRS-040-020-E

Grey

2.0

4.0

WRS-150-040-E

Orange

4.0

15.0

WRS-040-030-E

Grey

3.0

4.0

WRS-150-060-E

Orange

6.0

15.0

WRS-040-040-E

Grey

4.0

4.0

WRS-200-040-E

Orange

4.0

20.0

WRS-040-050-E

Grey

5.0

4.0

WRS-200-060-E

Orange

6.0

20.0

WRS-040-060-E

Grey

6.0

4.0

WRS-300-060-E

Orange

6.0

30.0

Sling Dimensions: WLL

Approx

Approx

WLL

Approx

Approx

WLL

Approx

Approx

tonne

Thickness mm

Width mm

tonne

Thickness mm

Width mm

tonne

Thickness mm

Width mm 200.0

1.0

6.0

40

8.0

13.0

90.0

40.0

40.0

2.0

7.0

50

10.0

15.0

100.0

50.0

45.0

220.0

3.0

8.0

60

12.0

16.0

110.0

60.0

65.0

240.0

4.0

9.0

70

15.0

18.0

125.0

80.0

70.0

260.0

5.0

11.0

75

20.0

20.0

150.0

100.0

80.0

290.0

6.0

12.0

80

30.0

24.0

200.0

BV_SyntheticSlings_DS012020

1300 LIFTING

info@bullivants.com www.bullivants.com


Synthetic Slings Flat Webbing Slings Main Features: • 2 Ply Polyester webbing with formed eyes at each end • Each sling supplies with test certificate • Colour coded to meet international lifting standards • Suitable for use with cranes, hoists and blocks • Complies with AS 1353.1:1997 Bullivants Mfr No.

Colour

Length

WLL

m

tonne

Bullivants Mfr No.

Colour

Length

WLL

m

tonne

WWS-010-010-2-050

Violet

1.0

1.0

WWS-030-010-2-100

Yellow

1.0

3.0

WWS-010-015-2-050

Violet

1.5

1.0

WWS-030-015-2-090

Yellow

1.5

3.0

WWS-010-020-2-050

Violet

2.0

1.0

WWS-030-020-2-090

Yellow

2.0

3.0

WWS-010-025-2-050

Violet

2.5

1.0

WWS-030-030-2-090

Yellow

3.0

3.0

WWS-010-030-2-050

Violet

3.0

1.0

WWS-030-040-2-090

Yellow

4.0

3.0

WWS-010-040-2-050

Violet

4.0

1.0

WWS-030-050-2-100

Yellow

5.0

3.0

WWS-010-050-2-050

Violet

5.0

1.0

WWS-030-060-2-100

Yellow

6.0

3.0

WWS-010-060-2-050

Violet

6.0

1.0

WWS-040-030-2-120

Grey

3.0

4.0

WWS-020-010-2-075

Green

1.0

2.0

WWS-040-060-2-140

Grey

6.0

4.0

WWS-020-015-2-075

Green

1.5

2.0

WWS-050-030-2-120

Red

3.0

5.0

WWS-020-020-2-075

Green

2.0

2.0

WWS-050-040-2-120

Red

4.0

5.0

WWS-020-025-2-075

Green

2.5

2.0

WWS-060-050-2-150

Brown

5.0

6.0

WWS-020-030-2-075

Green

3.0

2.0

WWS-060-060-2-150

Brown

6.0

6.0

WWS-020-040-2-075

Green

4.0

2.0

WWS-020-050-2-075

Green

5.0

2.0

WWS-020-060-2-075

Green

6.0

2.0

BV_SyntheticSlings_DS012020

1300 LIFTING

info@bullivants.com www.bullivants.com


• • • •

• • • •


â&#x20AC;¢


Chain Block Range Bullivants Chain Blocks are manufactured from the highest quality materials and equipped with the latest technology. This compact design includes improved features to make the chain block safer and easier to use ensuring a long service life.

Main Features: •

Improved braking performance to ensure the integrity of the load under all conditions

Design improvements result in 25% less operator effort, than previous models, to lift the rated load

Stainless Steel ID plates and rivets suitable for underground applications

Improved design of load sprockets for safer operation

Key internal components including gearing and sprockets are CNC machined for improved overall product reliability and longer life

Supplied with test certificate

Designed in accordance with EN 13157

Complies with AS 1418.2:1997

ZERO HARM Product Features: •

Improved design of load sprockets for safer operation

Load hooks with 'notched' safety latches increase service life of the latches and improve the safety of the lifting operation

All Bullivants Chain Blocks are individually load tested in accordance with Australian Standards

Specifications: Bullivants Mfr No.

Rated

Lifting

Hand Force

No. of Load

Load Chain

Hand Chain

Net

Capacity

Height

Fully Loaded

Chain Falls

Grade 80

Length

Weight kg

tonne

m

(N)

mm

m

WCB-0050-030-BVE-015

0.5

3

210

1

5x15

1.5

6.5

WCB-0050-030-BVE-025

0.5

3

210

1

5x15

2.5

8.0

WCB-0050-060-BVE-055

0.5

6

210

1

5x15

5.5

13.0

WCB-0100-030-BVE-015

1.0

3

285

1

6.3x19

1.5

10.5

WCB-0100-030-BVE-025

1.0

3

285

1

6.3x19

2.5

12.0

WCB-0100-060-BVE-055

1.0

6

285

1

6.3x19

5.5

17.1

WCB-0200-030-BVE-025

2.0

3

355

1

8x24

2.5

20.0

WCB-0200-060-BVE-055

2.0

6

355

1

8x24

5.5

25.0

WCB-0300-030-BVE-025

3.0

3

340

2

7.1x21

2.5

23.0

WCB-0300-060-BVE-055

3.0

6

340

2

7.1x21

5.5

31.9

WCB-0500-030-BVE-025

5.0

3

400

2

9x27

2.5

37.0

WCB-0500-060-BVE-055

5.0

6

400

2

9x27

5.5

49.6

WCB-1000-030-BVE-025

10.0

3

420

4

9x27

2.5

78.0

WCB-1000-060-BVE-055

10.0

6

420

4

9x27

5.5

100

WCB-2000-030-BVE-025

20.0

3

500

8

9x27

2.5

172

BV_Chainblocks_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Chain Block Range Chain blocks are fitted as standard twin pawl ratchets for 100% engagement in the unlikely event of a spring or pawl failure

Brake efficiency â&#x20AC;&#x201C; Bullivants chain blocks have a brake engagement force at a maximum of 3% WLL preventing any slippage due to light load conditions

Load hooks fitted with â&#x20AC;&#x2DC;notchedâ&#x20AC;? safety latches to increase service life of the latches and improve the safety of the lifting operation

Stainless steel ID plates and rivets suitable for underground applications

Key internal components including gearing and sprockets are CNC machined for improved overall product reliability and longer life

All Bullivants Chain Blocks are individually load tested in accordance with Australian Standards and supplied with individual test certificate

BV_Chainblocks_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Chain Block Range Dimensions: Bullivants Mfr No.

A

B

C

Ã&#x2DC;

E

Headroom

mm

mm

mm

mm

mm

H mm

WCB-0050-030-BVE-015

128

75

125

20

22

280

WCB-0050-030-BVE-025

128

75

125

20

22

280

WCB-0050-030-BVE-055

128

75

125

20

22

280

WCB-0100-030-BVE-015

142

76

150

25

26

330

WCB-0100-030-BVE-025

142

76

150

25

26

330

WCB-0100-030-BVE-055

142

76

150

25

26

330

WCB-0200-030-BVE-025

175

90

185

33

35

410

WCB-0200-060-BVE-055

175

90

185

33

35

410

WCB-0300-030-BVE-025

158

80

220

36

37

510

WCB-0300-060-BVE-055

158

80

220

36

37

510

WCB-0500-030-BVE-025

183

90

255

43

43

615

WCB-0500-060-BVE-055

183

90

255

43

43

615

WCB-1000-030-BVE-025

183

90

360

44

47

820

WCB-1000-060-BVE-055

183

90

360

44

47

820

WCB-2000-030-BVE-025

183

90

577

82

75

1060

Techincal Drawings:

500kg / 1t / 1.5t / 2t

10t

20t

3t / 5t

BV_Chainblocks_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Home of the Tiger hoisting and winching range Main Features: •

Suitable for use in multi-immersion applications

DNV GL Verification tested according to NORSOK R-002

Available with slipping clutch overload protection

Range from 500kg – 20000kg

Corrosion protected load and hand chain

Marine specific friction discs

Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration

Available with forged clevis adaptor components

Rugged steel body construction, yet lightweight and portable

Double cover protection for brake chamber

Drop forged & heat treated alloy hooks

Stainless steel fixings and fasteners

Patented Quad Cam Pawl System

Guaranteed 2% light load protection

Heat treated alloy steel triple spur gears and pinion shaft

-40°C to +50°C Operating temperature range

Proof tested to 1.5 times rated capacity

Can be chained to any height of lift to meet your exact requirements

Marine chain bags available on request

Individual spares readily available

Also available with stainless steel chain or spark resistant hooks

Fully corrosion protected body and components to ensure reliable long term use

Fitted with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2

Meets or exceeds all international standards

With clevis adaptor and shackle

Tiger_ChainBlock_CorrosionResi stant_DS032019

Spark resistant option

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Tiger SS12 Chain Block The SS12 is manufactured from the highest quality steel materials precisely machined in Tiger’s own factory, offering a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage. The especially low headroom allows for easy installation in the most restricted environments. The unique design features including our patented Quad Cam Pawl System, along with the anti-corrosion properties incorporated in this range, give it significant safety advantages over standard chain blocks and make the SS12 chain block the ideal tool for salt water use with low maintenance and servicing costs. These units meet and exceed all the requirements within BS EN 13157: 2004+A1:2009, ANSI/ASME B30.16, AS1418.2 and SANS 1594. The SS12 is suitable for use in multi-immersion applications providing the timescales, pre-use testing, maintenance and service requirements as detailed in relevant Tiger documents are strictly adhered to. Our patented Quad Cam Pawl System guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the SS12, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism. Key design features such as our patented brake pawls and deep pocket design hand wheel along with the full and comprehensive testing regime we have submitted our SS12 hoist to provide the evidence that allows us to state that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Tiger uses an 8 point multi start thread pinion shaft which has also increased brake reaction times.

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.

Environmental Testing and Multi-Immersion: After successfully completing a series of independent third party verification and testing programmes to beyond established international standards, our latest being 3rd party multi-immersion tests at Catapult ORE in the UK, we can state that the SS12 range of chain blocks is suitable for use in multi-immersion applications providing the timescales, pre-use testing, maintenance and service requirements as detailed in Tiger document Multi-Immersion Instruction Manual are strictly adhered to. This takes our testing far beyond the requirements of ASTM B117 environmental conditions with the SS12 range having over 1300 hours continuous exposure to an industry generated test programme in a real life offshore and subsea environment. This ensures the performance of the SS12 has been fully challenged in natural environments similar to the conditions it will be exposed to.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Patent Protected Quad Cam Brake Pawl System: This patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the SS12, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.

Brake Efficiency: Tiger uniquely uses an 8 point multi start thread pinion shaft which has measurably increased the efficiency in brake reaction times - up to 50% measurable difference compared with longitudinal 4 point pinion threads.

Chain End Stops: Will hold a load of at least 2.5 times the rated capacity when supporting the full load without restraint from other components e.g. brake or gearing as required in many international standards. This prevents accidents, by acting as a stop when the lift length of the load chain is exceeded when lowered.

Overload Protection: The SS12 chain block can be fitted with a slipping clutch overload mechanism to protect it from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the handle to be operated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The SS12 with overload protection is DNV GL Verification tested according to NORSOK R-002.

Safety Brake: The highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. The SS12 easily passes the “brake lock out test” as per BS 3243:1990 with a 2% load of the rated capacity.

Marine Friction Discs: Developed and designed for Subsea use creating a highly efficient, reliable braking surface for use in the most extreme conditions.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Adaptor Components Drop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.

Self-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).

SS12 chain block with clevis adaptor and self-locking (safety) hook, reevable egg (master) link and sling hook fittings

High Performance Premium Grease: Load carrying ability, mechanical stability, corrosion protection, water resistance and increased operating temperature ranges are all improved by the using only the very best lubricant.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Lifting at Angles: The SS12 range of chain blocks fitted with the patented protected Quad Cam Brake System has undergone a full and comprehensive testing regime that was drawn up by industry specialists and Tiger’s mechanical engineers to provide evidence that these units can be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without deration. Note: All such operations should be carried out in accordance with manufacturer’s instructions and fully risk assessed by a competent person. With a conventional twin pawl brake mechanism (teardrop design) failure can occur if the pawl spring erodes, fractures or a shock load bounces the pawls out of the ratchet gear. Without the spring these systems rely on gravity keeping the pawls engaged and are flawed when the hoist is used at angles away from the vertical.

Hand Wheel: For chain blocks to be used up to an angle of 45 degrees, it’s critical that the hand chain leaves and enters the hand wheel without twisting, snagging or jamming. Thanks to our specially designed deep-profile chain block hand wheel this is achievable as it helps to seat the chain no matter what angle or direction of pull.

Load Chain: Tiger only use the highest quality alloy, calibrated load chains in Grade V (Grade 100) conforming to EN818-7 and ISO 16872. These chains have been protected using OCP protection without any loss of mechanical performance. The SS12 comes as 3.0mtr HOL as standard but can be chained up to whatever length is required. Stainless steel load chain available on request for certain capacities – note Stainless Steel chain has a lower rating so will de-rate the hoist accordingly.

Chain Carriers: All our SS12 chain blocks are available with chain bags on request to fit the exact amount of chain specified. Designed to carry and hold the exact length of load chain required for the operation. Incorporating a stainless steel frame work and heavy duty PVC flexible bag reinforced by webbing with eyelet drain holes for an easy transfer through the splash zone. These chain bags prevent loose chain from getting snagged during lifting or lowering operations and protect any loose chain during transit to and from the operational site.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Mechanical Efficiency: All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.

Double Cover Protection: Both the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects.

Hooks: Our hooks incorporate our latest Patent Pending “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks. Our drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts & bolts allowing for complete inspection during any statutory inspection or written scheme maintenance. The entire hook fitting has been protected using OCP or stainless steel fixtures and fittings. Available with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.

Forgings: Recessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Combination Trolley and Block The top hook can be re placed by an authorised person so the SS12 can be directly fitted to our beam trolley range of the equivalent capacity achieving the lowest possible headroom. Protection and Finish: Critical internal components as well as the load and hand chain are protected by our OCP (Organic Compound Protection) finish giving unprecedented long term reliability. Stainless steel fittings are used throughout the hoist. These ensure the initial capital outlay of purchasing the SS12 is protected by allowing the statutory inspections and re-certifications to be easier and also help with the overall aesthetics of the hoist being maintained in an “as new” condition. The SS12 is finished in our high quality white Akzo Nobel powder coat paint offering excellent additional corrosion protection and a high degree of impact protection. Performance: The SS12 has undergone a full test program that includes: Type Testing •

Ultimate strength test, at least 4 times the Working Load Limit (WLL)

Continuous cyclic testing of over 1500 cycles

Chain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears

Test on every hoist •

Proof loading at 1.5 times the rated capacity

Light load testing at maximum of 2% rated capacity

Specifications: Bullivants Mfr No.

Rated

Effort

Capacity

kg

tonne WCB-0050-030-TGSS

0.5

21

1.0

25

WCB-0200-030-TGSS

2.0

34

WCB-0320-030-TGSS

3.0

38

WCB-0500-030-TGSS

5.0

37

WCB-1000-030-TGSS

10.0

40

WCB-1500-030-TGSS

15.0

41

WCB-2000-030-TGSS

20.0

43

WCB-3000-030-TGSS

30.0

42

stant_DS032019

Diameter

Standard

Mass @

Mass for extra

HOL

std HOL

metre HOL

m

kg

kg

3

10.5

1.9

No. of Falls

mm

WCB-0100-030-TGSS

Tiger_ChainBlock_CorrosionResi

Load Chain

⌀6.3

1

⌀6.3

1

3

11.5

1.9

⌀8.0

1

3

20.0

2.4

⌀10.0

1

3

30.5

3.2

⌀8.0

3

3

37.5

5.2

⌀10.0

3

3

64.0

7.5

⌀10.0

5

3

128.5

11.8

6

3

178.5

14.2

10

3

307.0

23.8

⌀10.0 ⌀10.0

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Technical Data: Bullivants Mfr No.

Dimensions mm A

B

C

D

E

F1

F2

WCB-0050-030-TGSS

93

66

305

52

78

24

38

WCB-0100-030-TGSS

93

66

340

63

87

28

45

WCB-0200-030-TGSS

101

79

420

87

113

35

53

WCB-0320-030-TGSS

109

84

550

98

157

36

56

WCB-0500-030-TGSS

101

79

575

122

209

49

70

WCB-1000-030-TGSS

109

84

660

153

263

54

87

WCB-1500-030-TGSS

109

84

840

225

378

59

81

WCB-2000-030-TGSS

161

90

1050

148

360

81

110

WCB-3000-030-TGSS

220

220

1200

388

388

91

135

Technical Drawings:

0.5t – 2.0t

Tiger_ChainBlock_CorrosionResi stant_DS032019

3.0t Single Fall

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block â&#x20AC;&#x201C; SS12

Tiger_ChainBlock_CorrosionResi stant_DS032019

5.0t

10.0t

20.0t

30.0t

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Corrosion Resistant Chain Block – SS12

Hook Technical Data: Capacity

Collar measurements

Hook thickness at point

Hook Throat

“EZ Check”

mm

shown in diagram

Opening

measurement

mm

mm

mm

tonne a

b

c

d

e

f

0.5

8

13.5

19

15

29

47

1.0

8

13.5

23

17

34

52

1.5

10

15.5

26

21

39

59

2.0

10

17.5

30

22

42

64

3.0

12.5

20

37

32

42

76

5.0

19

30

43

36

58

86

10.0

20

33

52

48

70

121

20.0

-

48

77

72

90

162

30.0

-

56

94

78

102

177

Traditional Tiger Hooks

Tiger Hooks with new “EZ Check 3 point marking system

Newer models of the SS12 are fitted with the patent pending Tiger “EZ Check” 3 point marking system. With this system a quick check that the A and B measurements are the same (as shown in the diagram opposite) will indicate if the hooks have stretched if A≦B the hook is fine; If A>B the hook needs to be replaced.

Tiger_ChainBlock_CorrosionResi stant_DS032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block – RCB Home of the Tiger hoisting and winching range Main Features: •

3.0t, 10.0t, 15.0t and 20.0t capacity units available

Fully corrosion protected

Several choices of interface: o

Hydraulic Hot Stab connection dual port type A and

o

Rotary Torque Receptacle Classes 1, 2 & 3

o

Manual D Handle, T-bar or Fishtail Direct Drive

o •

B

manual connection QD Direct Drive Couplings

Compliant with BS ISO 13628-8:2002 & BS ISO 13628-1:2005

Stainless steel 316 framework and handle

Proven Subsea brake design

Patented Quad Can pawl system

One-piece brake chamber cover

Heavy duty flexible chain bag c/w stainless steel mounting frame available as an option

4 Point manipulator connection points

Compact and light weight

Balanced design for easy handling and installation

Marine specific friction discs

New hand wheel feature for on-deck height of lift adjustments

Bespoke chain lengths to meet exact customer requirements

Full individual spares back up

Each unit is fully tested and certified before delivery

Tiger_ROVChainBlock_DS200219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block – RCB Tiger ROV Chain Block The Tiger ROV compatible chain block is available in various different interface options all in accordance with BS ISO 13628-8:2002 ROV Interfaces on Subsea production systems. Tested and finished in accordance with Annexes B & K of BS ISO 13628-1:2005: 1)

Hydraulic Hot Stab connection dual port type A and B

2) Rotary Torque Receptacle Classes 1,2 & 3 3) D Handle, T-bar or Fishtail Direct Drive manual connection 4) QD Direct Drive Couplings Available as a 3.0 tonne (single fall of load chain), 10 tonne (3 falls), 15 tonne (5 falls) and 20 tonne single head (6 falls) capacity chain blocks, chained up to project specific heights of lift (H.O.L.) that can be pre-set to meet the exact starting point required within the rigging drawings.

QD Direct Drive Couplings

Manual D Handle Interface

One of our Torque Receptacle Options

Protection and Finish: Critical internal components as are protected by our OCP (Organic Compound Protection) finish giving unprecedented long-term reliability. Stainless steel fittings are used throughout the hoist. These ensure the initial capital outlay of purchasing the hoist is protected by allowing the statutory inspections and recertifications to be easier and also help with the overall aesthetics of the hoist being maintained in an ”as new” condition. The integrated SS12 chain block is finished in our high quality white Akzo Nobel powder coat paint offering excellent additional corrosion protection and a high degree of impact protection. Chain with extra corrosion protection is also available.

Hydraulic Hot Stab: Working in partnership with Forum Energy Technologies (formerly Perry Slingsby Systems Ltd) we have designed and built an ISO 13628-8 fig 20 Type A & B Dual Port Hub Stab Female receptacle that is protected by our full 316 Stainless Steel frame handle that has 4 built in connection points for the work class manipulators to hold and operate. This exclusively designed system makes for a well-balanced unit that sits perfectly when installing the unit within the project rigging. We use high quality dual direction check valves that prevents loss of the hydraulic fluid within the system when the hot stab is removed. These valves have a dual purpose as they ensure the minimal level of contamination to the system form sea water. We incorporate laser cut text for identification of hydraulic adjustments.

Tiger_ROVChainBlock_DS200219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB

Stainless Steel Laser Cut Mounting Frame

High Performance Marine Spec Hydraulic System

Rotary Torque Tool: The interface has been designed to meet the exact requirements of BS ISO 13628-8:2002. These units can be supplied in Classes 1+2 or class 3 giving maximum tooling flexibility whilst only requiring an operations torque of 5-Nm to lift 20 tonnes.

D Handle, T-Bar or Fishtail Manual Direct Drive: Using the same guard frame as the torque tool interface built from 316L Stainless Steel giving maximum protection, this option gives a very flexible operator-friendly interface by incorporating a high strength but flexible compliance joint making for a very positive and reliable direct drive mechanism.

Stainless Steel Frame Handle: All interface options come mounted in our purpose built high strength frames that ae constructed using 316L Stainless Steel bar and tubing, ensuring full compliance with BS ISO 13628-8:2002 (E) which gives the manipulators four T-bar connection positions to hold onto and these tie in with T slots found in parallel jaw manipulators. All welds are continuous and al edges sealed to prevent corrosion. Frames have laser cut text for identification of hydraulic adjustments. Frames are painted RAL 20002 orange as per ISO 13628-1 to signify ROV grab point.

Subsea Brake: Developed and designed for Subsea use creating a highly efficient, reliable braking surface for use in the most extreme conditions.

Optional Chain Bags: Designed to carry and hold the exact length of load chain required for the operation. Incorporating a stainless steel frame work and heavy duty PVC flexible bag reinforced by webbing with eyelet drain holes for an easy transfer through the splash zone. These chain bags prevent loose chain from getting snagged during lifting or lowering operations and protect any loose chain during transit to and from the operational site.

Tiger_ROVChainBlock_DS200219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block – RCB Chain Guides: Specifically designed to guide the load chain safely onto or off the load sheave without snagging or jamming, the fluted chain stripper ensures unrestricted entry and exit of the calibrated load chain.

Hooks: Our hooks incorporate out latest Patent Pending “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks. Our drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts and bolts allowing for complete inspection during any statutory inspection or written scheme maintenance. The entire hook fitting has been protected using OCP or stainless steel fixtures and fittings. Available with hooks that swivel under the full working load limit, to meet relevant standards ie. AS 1418.2. Also available with spark resistant hooks.

High Performance Premium Grease: Load carrying ability, mechanical stability, corrosion protection, water resistance and increased operating temperature ranges are all improved by the using only the very best lubricant.

Hand Wheel: Recent innovation to meet client requirements saw the optional addition of a hand wheel on out ROV operated chain blocks to allow for on-deck height of lift adjustments.

Quality Machining: Our strong impact resistant gearbox housing is complete with close tolerance fit phosphor bronze bushing that full supports the pinion shaft and gears to maintain smooth revolutions whilst under load. The Subsea suitable bearings for top and bottom hook load sheaves are enclosed in drop forged housings assembled with stainless steel fittings.

Tiger_ROVChainBlock_DS200219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block – RCB User Manual/Certification: There is an accompanying user manual which includes a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test for the unit at 1.5 times the rated capacity on the 3.0t, 10.0t and 15.0t models and 1.25 times (25.0t) for the 20.0t model and the light load test of 2% of the rated capacity across the full range, which exceeds the requirements of the current applicable standard. Chain certification is included as part of this documentation.

Hydraulic Specification: Hydraulic Interface: ISO 13628-8 Fig 20 Type A & B Dual Port Hot Stab Female. Recommended Hydraulic Fluid: Hydraulic Mineral oil AWS 22 or 23 or similar. Hydraulic Supply: 210bar Maximum (Via ROV or Deck Powerpack) Guide flow rate 4 to 8 litres per minute. Danfoss 80cc hydraulic motor. Painted Stainless Steel mount frame. Manufacturer Coated Steel motor. Stainless Steel Hydraulics and fastenings.

Available with Adaptor Components: Drop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for Maximum Flexibility. Tested and certified to 4:1 factor of safety.

Tiger clevis shackle or reevable egg (master) link available for units up to 10t capacity or alternatively the hoist can be customised for alternative fittings for all capacities.

Technical Data:

Tiger_ROVChainBlock_DS200219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB Chain Block Data:

Technical Drawings:

3.0t single fall

15.0t

Tiger_ROVChainBlock_DS200219

10.0t

20.0t

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB ROV Chain Block with D Handle Data:

RCB 3.0t D-Handle

RCB 15.0t D-Handle

Tiger_ROVChainBlock_DS200219

RCB 10.0t D-Handle

RDB 20.0t D-Handle

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB ROV Chain Block with Fishtail Data:

Tiger_ROVChainBlock_DS200219

RCB 3.0t Fishtail

RCB 10.0t Fishtail

RCB 15.0t Fishtail

RCB 20.0t Fishtail

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB ROV Chain Block with Hot Slab Data:

Tiger_ROVChainBlock_DS200219

RCB 3.0t Hot Stab

RCB 10.0t Hot Stab

RCB 15.0t Hot Stab

RCB 20.0t Hot Stab

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger ROV Chain Block â&#x20AC;&#x201C; RCB ROV Chain Block with QD Drive Data:

Tiger_ROVChainBlock_DS200219

RCB 3.0t QD Drive

RCB 10.0t QD Drive

RCB 15.0t QD Drive

RCB 20.0t QD Drive

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Low Headroom Combination Chain Block & Trolley - LHCG Home of the Tiger hoisting, winching and height safety range

Main Features: •

Very low headroom

Range from 1.0t to 10.0t

Ideal for locations where headroom is limited

Operating temperature of -30°C to +50°C (temperature -50°C to +50°C available on request)

Can be chained to any height of lift to meet your exact requirements

Chain carrier available

Spark resistant version available

Available with load limiter

Available with beam lock device

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

TigerLHGTC_DS012019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Low Headroom Combination Chain Block & Trolley - LHCG Technical Data: Product Code

Capacity

Device

(tonne)

A

B

C

D

E

F

G

H

1.0

294

154

192

135

70.5

210

24

62-180

1.0

440

154

192

135

70.5

210

24

62-180

2.0

376

186

194

145

79.5

260

24

88-180

2.0

532

186

194

145

79.5

260

24

88-180

3.0

450

230

197

155

96.5

305

32

88-180

LHCG-0100 LHCG-0100-K

Y

LHCG-0200 LHCG-0200-K

Y

LHCG-0300 LHCG-0300-K

Y

LHCG-0600 LHCG-0600-K

Y

LHCG-1000 LHCG-1000-K

Dimensions (mm)

Locking

Y

3.0

627

230

197

155

96.5

305

32

88-180

6.0

495

280

205

167

117

425

32

106-194

6.0

672

280

205

167

117

425

32

106-194

10.0

560

380

335

258

182

550

45

150-320

10.0

750

380

335

258

182

550

45

150-320

Standard geared trolley hand chain length – 2.5m. Length can be changed to suit your requirements. Standard height of lift (HOL) of chain block – 3m. We can change this to suit your requirements.

Technical Drawings:

1.0t – 3.0t (LHCG)

TigerLHGTC_DS012019

1.0t – 3.0t with locking device (LHCG-K)

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Low Headroom Combination Chain Block & Trolley - LHCG

6.0t (LHCG)

6.0t with locking device (LHCG-K)

10.0t (LHCG)

10.0t with locking device (LHCG-K)

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with you Bullivants Sales Representative when ordering.

TigerLHGTC_DS012019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Chain Block – TCB14 Home of the Tiger hoisting and winching range Tiger TCB Heavy Duty Chain Block Tiger is Bullivants’ premium range of hoisting equipment and is manufactured from the highest quality steel materials precisely machined in Tiger’s own factory. This results in a lightweight, compact and rugged construction, producing an exceptionally strong product resistant to impact damage.

Main Features: •

Range from 500kg – 30000kg

Patented Quad Cam Pawl System

Available with slipping clutch overload protection

Tested and certified for “fleeting” and “cross-hauling”

Applications up to 45° from the vertical without reduction in WLL

Available with forged clevis adaptor components

Certified 2% light load protection

Rugged steel body construction yet lightweight and portable

Double cover protection for brake chamber

Drop forged & heat treated alloy hooks

High quality Grade 100 alloy calibrated load chain

Heat treated alloy steel triple spur gears and pinion shaft

Hooks are fitted with ‘EZ Check’ 3 point measuring system to check for stretch

Operating temperature of -40°C to +50°C

Can be chained to any height of lift to meet your exact requirements

Individual spares readily available

Suitable for underground mining use

Supplied with load bearing swivel hooks to meet AS 1418.2

Meets or exceeds all international standards

TigerTCB14_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Chain Block â&#x20AC;&#x201C; TCB14

Adaptor Components: Available with drop forged adaptor fittings for maximum safety.

Combination Trolley and Block: The top hook can be fitted with an adaptor allowing the TCB to be attached directly to a Tiger beam trolley to achieve the lowest possible headroom.

Patent Protected Quad Cam Brake Pawl System: This patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the TCB. In the unlikely event of a pawl spring failure, this design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.

Overload Protection: If the chain block is fitted with a slipping clutch overload mechanism, then it is protected from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the hand wheel to be rotated whilst not engaging the gear box.

Brake Efficiency: Tiger uniquely uses an 8 point multi start thread pinion shaft which has measurably increased the efficiency in brake reaction times - up to 50% measurable difference compared with longitudinal 4 point pinion threads.

Chain End Stops: Will hold a load of at least 2.5 times the rated capacity.

TigerTCB14_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Chain Block – TCB14 Safety Brake: The highly efficient and fully corrosion protected brake system works instantly when the operation is stopped and securely holds the load. Loads are lowered under perfect control, allowing for precise operations. Double Cover Protection: Both the hand chain wheel cover and the ratchet brake cover are designed to offer protection to the brake chamber in the harshest environments from foreign objects. Mechanical Efficiency: All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum. Lifting at Angles: The TCB range of chain blocks fitted with the patented protected Quad Cam Brake System allowing these units to be safely used for “fleeting”, “drifting” and “cross-hauling” applications up to 45° from the vertical without reduction in WLL.

Technical Data: Overload Protection Without

With

Capacity

Lift

tonne

m

Mass kg

Hand Chain Length m

Bullivants Mfr No.

Bullivants Mfr No.

WCB-0050-030-TG

WCB-0050-030-TGOLP

0.5

3

10.80

2.5

WCB-0050-060-TG

WCB-0050-060-TGOLP

0.5

6

16.38

5.5

WCB-0100-030-TG

WCB-0100-030-TGOLP

1.0

3

11.80

2.5

WCB-0100-060-TG

WCB-0100-060-TGOLP

1.0

6

17.38

5.5

WCB-0160-030-TG

WCB-0160-030-TGOLP

1.6

3

16.20

2.5

WCB-0160-060-TG

WCB-0160-060-TGOLP

1.6

6

22.50

5.5

WCB-0200-030-TG

WCB-0200-030-TGOLP

2.0

3

20.00

2.5

WCB-0200-060-TG

WCB-0200-060-TGOLP

2.0

6

27.17

5.5

WCB-0320-030-TGS

WCB-0320-030-TGOLP

3.2

3

30.50

2.5

WCB-0320-030-TGT

WCB-0320-030-TGOLPT

3.2

3

23.00

2.5

WCB-0320-060-TGT

WCB-0320-60-TGOLPT

3.2

6

32.60

5.5

WCB-0500-030-TG

WCB-0500-030-TGOLP

5.0

3

37.80

2.5

WCB-0500-060-TG

WCB-0500-060-TGOLP

5.0

6

53.31

5.5

WCB-0800-030-TG

WCB-0800-030-TGOLP

8.0

3

67.00

2.5

WCB-0800-060-TG

WCB-0800-060-TGOLP

8.0

6

86.68

5.5 2.5

WCB-1000-030-TG

WCB-1000-030-TGOLP

10.0

3

65.00

WCB-1000-060-TG

WCB-1000-060-TGOLP

10.0

6

87.62

5.5

WCB-1500-030-TG

WCB-1500-030-TGOLP

15.0

3

131.40

2.5 5.5

WCB-1500-060-TG

-

15.0

6

166.95

WCB-2000-030-TG

WCB-2000-030-TGOLPS

20.0

3

180.50

2.5

WCB-2000-060-TG

-

20.0

6

223.10

5.5

WCB-3000-030-TG

WCB-3000-030-TGOLP

30.0

3

307.00

2.5

TigerTCB14_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Lever Block Range Bullivants Lever Blocks are manufactured from the highest quality materials and equipped with the latest technology. This compact design includes innovative features to improve operator safety by making the lever block safer and easier to use ensuring a long service life.

Main Features: • Design improvements result in 25% less operator effort, than previous models, to lift the rated load • Lever blocks are fitted as standard twin pawl ratchets for 100% in the unlikely event of a spring or pawl failure • Key internal components including gearing and sprockets are CNC machined for improved overall product reliability and longer life • Load hooks with ‘notched’ safety latches increase service life of the latches and improve the safety of the lifting operation • Stainless Steel ID plates and rivets suitable for underground applications • Brake engages at maximum 3% of Working Load Limit • Designed in accordance with EN 13157 and AS 1418.2 • All Bullivants Lever Blocks are individually load tested in accordance with Australian Standards • Complies with AS 1418.2:1997

ZERO HARM Product Features: • Improved design of load sprockets for safer operation • Load hooks with cast 'notched' safety latches increase service life of the latches and improve the safety of the lifting operation • Hi Visibility Colour contrast connecting points • All Bullivants Lever Blocks are individually load tested in accordance with Australian Standards

BV_LeverBlocks_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Lever Block Range Fitted with 100% engagement twin pawl ratchets in the unlikely event of a spring or pawl failure.

Key internal components including gearing and sprockets are CNC machined for improved overall product reliability and longer life.

Load hooks with â&#x20AC;&#x2DC;notchedâ&#x20AC;&#x2122; safety latches as standard to increase service life of the latches and improve the safety of the lifting operation.

Stainless Steel ID plates and rivets suitable for underground applications.

Specifications: Bullivants Mfr No.

Rated

Lifting

Hand Force Fully

No. of Load

Load Chain

Net

Capacity

Height

Loaded (N)

Chain Falls

Grade 80

Weight

tonne

m

mm

kg

WHS-L-0025-010-BVE

0.25

1.0

227

1

4x12

2.4

WHS-L-0050-015-BVE

0.50

1.5

248

1

5x15

5.3

WHS-L-0075-015-BVE

0.75

1.5

285

1

5.6x17

7.0

WHS-L-0075-030-BVE

0.75

3.0

285

1

5.6x17

8.0

WHS-L-0150-015-BVE

1.5

1.5

315

1

7.1x21

10.0

WHS-L-0150-030-BVE

1.5

3.0

315

1

7.1x21

12.0

WHS-L-0300-015-BVE

3.0

1.5

360

1

10x28

20.0

WHS-L-0300-030-BVE

3.0

3.0

360

1

10x28

23.0

WHS-L-0600-015-BVE

6.0

1.5

370

2

10x28

29.0

WHS-L-0600-030-BVE

6.0

3.0

370

2

10x28

36.2

WHS-L-0900-015-BVE

9.0

1.5

370

3

10x28

50.8

BV_LeverBlocks_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Lever Block Range Dimensions: Bullivants Mfr No.

A

B

C

Ã&#x2DC;

E

Headroom H

Lever

mm

mm

mm

mm

mm

mm

Handle Length D mm

WHS-L-0025-010-BVE

100

70

86

18

20

250

168

WHS-L-0050-015-BVE

142

81

118

20

22

310

253

WHS-L-0075-015-BVE

147

87

132

25

26

340

273

WHS-L-0075-015-BVE

147

87

132

25

26

340

273

WHS-L-0150-015-BVE

172

94

145

30

29

400

378

WHS-L-0150-030-BVE

172

94

145

30

29

400

378

WHS-L-0300-015-BVE

185

97

198

36

37

520

418

WHS-L-0300-030-BVE

185

97

198

36

37

520

418

WHS-L-0600-015-BVE

185

97

230

43

43

640

418

WHS-L-0600-030-BVE

185

97

230

43

43

640

418

WHS-L-0900-015-BVE

185

97

338

44

47

730

418

Technical Drawings:

250kg

BV_LeverBlocks_DS032020

500kg / 750kg / 1.5t / 3t

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Compact Lever Hoist -TLH

Home of the Tiger hoisting and winching range Main Features: •

Range includes 250kg & 500kg

Rugged steel body construction

Lightweight and portable

360 degree handle rotation

Short stroke and low lever pulling effort

Easy single-hand “freewheeling” operation

Drop forged & heat treated alloy hooks

High quality European or Japanese alloy calibrated load chain

Safe reliable twin pawl mechanical brake

Guaranteed light load protection

Heat treated alloy steel triple spur gears and pinion shaft

Operating temperature of -40°C to +50°C

Proof tested to 1.5 times rated capacity

1.5m for 0.25t and 1.5m or 3m height of lift for 0.5t as standard

Meets or exceeds all international standards

Hoists come with useful belt bags

Tiger TLH Heavy Duty Lever Hoists Lightweight, compact and rugged construction with the handle, gear case and brake cover made entirely of pressed steel, producing strong resistance to impact damage. Using only the highest quality materials precisely machined throughout ensures the TLH is the ideal hoist for long term use with less maintenance and servicing costs. These units meet and exceed all the requirements within BS EN 13157: 2004+A1:2009, ANSI/ASME B30.21, AS1418.2 and SANS 1636.

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 5% of the rated capacity, which exceeds the requirements of the current applicable standard.

Tiger_LeverHoists_TLH_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Compact Lever Hoist -TLH

Safety Brake: The highly efficient twin pawl brake, works instantly when the operation is stopped and securely holds the load. Designed and 100% tested to hold a 5% load of the rated capacity. The bonded friction discs are free of asbestos and achieve highly efficient braking.

Load Chains: Tiger only use the highest quality alloy, calibrated load chains in Grade V.

Grease: High performance premium quality grease allows the TLH hoists to be certified for use within a temperature range of -40°C to +50°C far exceeding the requirements of current standards.

Mechanical Efficiency: All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.

Performance: The TLH lever hoist has undergone a full test program that includes: Type Testing •

Ultimate strength test, at least 4 times the Working load limit (WLL)

Chain end anchorage test, passing at least 4 times the WLL without any restriction of the brake or gears

Test on every hoist •

Proof loading at 1.5 times the rated capacity

Light load testing at maximum of 2% rated capacity

Finish: The TLH is finished is a high quality zinc plate or powder coat offering excellent corrosion protection.

Tiger_LeverHoists_TLH_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Compact Lever Hoist -TLH

Technical Data: Product Code

Capacity

Effort

tonne

kg

Dimensions mm A

B

C

D

E

Load Chain F1

F2

WHS-L-0025-015-TG

0.25

30

60

169

245

82

63

22

31

WHS-L-0050-015-TG

0.5

30

89

169

280

113

70

24

38

WHS-L-0050-030-TG

0.5

30

89

169

280

113

70

24

38

Height

Mass @

Dia.

No. of

of Lift

Std

extra

mm

Falls

m

HOL kg

metre HOL

1

1.5

2.0

0.3

1

1.5

3.0

0.3

1

1.5

3.0

0.3

â&#x152;&#x20AC; 4.0 4.0 4.0

Mass for

kg

Technical Drawings:

0.25t

Tiger_LeverHoists_TLH_DS032020

0.5t (new design April 2019)

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Compact Lever Hoist -TLH

Hook Technical Data: Capacity

Collar measurements

Hook thickness at point

Hook Throat

“EZ Check”

mm

shown in diagram

Opening

measurement

mm

mm

tonne a

b

c

d

e

f

0.25

5

8

18

12

26

-

0.5

8

13.5

19

15

29

47

Traditional Tiger Hooks

Tiger Hooks with new “EZ Check” 3 point marking system

Newer models of the TLH are fitted with the patent pending Tiger “EZ Check” 3 point marking system. With this system a quick check that the A and B measurements are the same (as shown in the diagram opposite) will indicate if the hooks have stretched if A≦B the hook is fine; If A>B the hook needs to be replaced.

Tiger_LeverHoists_TLH_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Professional Lever Hoist PROLH Home of the Tiger hoisting and winching range Tiger PROLH Lever Hoists PROLH Lever hoists are Bullivants’ premium product range and incorporate many of the advanced safety features that Tiger has pioneered.

Main Features: •

Available with slipping clutch overload protection

Range from 800kg – 20,000kg

Available with forged clevis adaptor components

Patented Quad Cam Pawl System

Equipped with our unique intelligent Torsion Brake System

8 point multi start thread pinion shaft for reduced brake reaction times

One piece machined gears

Light load tested and certified at 2% of the rated capacity

No requirement for preload tension to activate the ratchet mechanism

Adaptable to use both inverted and horizontally

Using only the highest Japanese or German calibrated load chains according to EN818-7 and ISO 16872

Individual spares readily available

Hooks are fitted with ‘EZ Check’ 3 point measuring system to check for stretch

Operating temperature of -40°C to +50°C

All major parts are heat treated and precisely machined

Finished in high quality powder coat paint offering excellent corrosion protection

Can be chained up to meet your exact requirements

Fitted with load bearing swivel hooks to meet AS 1418.2

Safety Brake Our unique rotational inertia driven torsion switch brake and freewheeling system automatically engages when the lever hoist feels the slightest resistance or load. This key feature means that the PROLH will raise, hold and lower the lightest of loads without slipping. The two stage process protects against accidental light load failures by putting the hoist into neutral whilst under load. Freewheel position

Tiger_LeverHoist_D022020

1300 LIFTING

Break Engaged position

info@bullivants.com www.bullivants.com


Tiger Professional Lever Hoist PROLH Patent Protected Quad

Brake Efficiency

Cam Brake Pawl System

Tiger uses an 8 point multi start thread pinion shaft which has measurably reduced brake reaction times.

Overload Protection

Hooks

Tiger Lever hoists are available

Our hooks incorporate our latest Patent

with slipping clutch overload

Pending “EZ Check” feature which allows

protection mechanisms.

operators and inspection engineers to easily check to see if the hoist has been previously overloaded.

Chain Stripper

Chain End Stops

The chain stripper is

Tiger End Stops will hold a load of at least 2.5

specifically designed to allow

times the rated capacity.

the safe use of the PROLH when used in any orientation.

Adaptor fittings Available

Technical Data Overload Protection

Capacity

Without

Bullivants Mfr No.

Bullivants Mfr No.

WHS-L-0080-015-TGPRO

WHS-L-0080-015-TGOLP

0.8

WHS-L-0080-030-TGPRO

WHS-L-0080-030-TGOLP

0.8

WHS-L-0100-015-TGPRO

WHS-L-0100-015-TGOLP

WHS-L-0160-015-TGPRO

WHS-L-0160-015-TGOLP

WHS-L-0160-030-TGPRO WHS-L-0320-015-TGPRO WHS-L-0320-030-TGPRO WHS-L-0630-015-TGPRO WHS-L-0630-030-TGPRO WHS-L-1000-015-TGPRO WHS-L-1000-030-TGPRO

Load Chain

tonne

With

Diameter ⌀ mm

Height of Lift

Mass @ Std

m

HOL kg

No. of Falls

6.3⌀

1

1.5

7.5

6.3

1

3

8.8

1.0

6.3

1

1.5

7.5

1.6

7.1

1

1.5

10.5

WHS-L-0160-030-TGOLP

1.6

7.1

1

3

12.1

WHS-L-0320-015-TGOLP

3.2

10

1

1.5

18.0

WHS-L-0320-030-TGOLP

3.2

10

1

3

21.3

WHS-L-0630-015-TGOLP

6.3

10

2

1.5

28.5

WHS-L-0630-030-TGOLP

6.3

10

2

3

34.9

WHS-L-1000-015-TGOLP

10.0

10

3

1.5

46.0

10.0

10

3

3

55.0

Due to our policy of continual product development, dimensions weights and specifications may change without prior notice. Please check with your sales team when ordering.

Tiger_LeverHoist_D022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Home of the Tiger hoisting and winching range Main Features: •

Suitable for use in multi-immersion applications

DNV GL Verification tested according to NORSOK R-002

Available with slipping clutch overload protection

Range from 800kg – 20000kg

Available with forged clevis adaptor components

Patented Quad Cam Pawl System

Equipped with our unique intelligent Torsion Brake System

Certified track record with thousands of hours of empirical evidence of performance

One piece construction pinion gear

Proven marine specific friction discs

Meets and exceeds IMCA DO28 Rev 1 guidance notes for offshore lever hoists

Light load protection at 2% of the rated capacity

Lifts, holds and lowers the load at 2% of rated capacity

No requirement for preload tension to activate the ratchet mechanism

Adaptable to use both inverted and horizontally

Brake chamber protection from outside contamination

High performance premium grease

Stainless steel fixings and fasteners

Fully Corrosion protected body and components to ensure reliable long term use

-40°C to +50°C Operating temperature range

Adjustable chain end anchorage specifically designed to the contours of the hoist

Also available with stainless steel load chain or spark resistant hooks

Available with load bearing swivel hooks to meet relevant standards i.e. AS 1418.2

Meets or exceeds all international standards

With clevis adaptor and shackle

Tiger_LeverBlock_SS11_D032019

Unique torsion brake

1300 LIFTING

With Overload protection

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Tiger SS11 Subsea Lever Hoist The SS11 has been designed and developed over a number of years for use primarily in subsea, offshore or corrosive environments. The unique design features - including the one piece construction pinion gears and patented Quad Cam Pawl System, along with the anti-corrosion properties incorporated in this range, give it significant safety advantages over standard lever hoists. This makes the SS11 subsea lever hoist the ideal tool for all marine and extreme applications. Developed initially with the goal of giving key stakeholders within the Oil and Gas Industry a hoist that could be certified for safe use subsea whilst meeting all the requirements of IMCA DO28 Rev. 1 “Guidance notes for offshore lever hoists”, the SS11 meets and exceeds these requirements, as well as other industry client specifications whilst conforming to standards such as BS EN 13157: 2004+A1:2009, ANSI/ASME B30.212005, AS1418.2 and SANS 1636. The SS11 is suitable for use in multi-immersion applications providing the timescales, pre-use testing, maintenance and service requirements as detailed in relevant Tiger documents are strictly adhered to. Our patented Quad Cam Pawl System guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the SS11, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism. This model includes our unique rotational inertia driven torsion switch brake and freewheeling system. This brake system was designed by our research and design team to counter known failure modes in commonly used and copied longitudinal “push-pull” mechanisms or traditional style “Weston” type brake systems used on alternative lever hoists. This Tiger brake system is now a proven design with many thousands of hours of empirical evidence as proof of design and efficiency. This design removes the need for inefficient old style longitudinal disengagement methods of pulling the brake system apart to facilitate freewheeling. This highly efficient method of operating is not only safer but easier for the operator whilst measurably increasing the brake take up efficiency rate. Tiger uses an 8 point multi start thread pinion shaft which has also increased brake reaction times. The rotational engagement of the brake works with the direction of the load sheave creating highly efficient braking ratios - up to 50% measurable difference compared with longitudinal push-pull brake systems. With over 50 years of professional manufacturing experience, Tiger’s commitment to innovation and customer satisfaction mean we will continue to develop and improve our products by communicating and working with our customers. The SS11 range of lever hoists is evidence of this practice.

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 2% of the rated capacity, which exceeds the requirements of the current applicable standard.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist â&#x20AC;&#x201C; SS11

Adaptor Components Drop forged adaptor maintaining maximum strength. 360° Rotation and 180° Pivot for maximum flexibility. Tested and certified to 4:1 factor of safety.

Self-locking (safety) hook, clevis shackle, reevable egg (master) link or sling hook fittings available (for units up to 10t capacity).

Environmental Testing and Multi-Immersion: After successfully completing a series of independent third party verification and testing programmes to beyond established international standards, our latest being 3rd party multi-immersion tests at Catapult ORE in the UK, we can state that the SS11 range of lever hoists is suitable for use in multi-immersion applications providing the timescales, pre-use testing, maintenance and service requirements as detailed in Tiger document Multi-Immersion Instruction Manual are strictly adhered to. This takes our testing far beyond the requirements of ASTM B117 environmental conditions with the SS11 range having over 1300 hours continuous exposure to an industry generated test programme in a real life offshore and subsea environment. This ensures the performance of the SS11 has been fully challenged in natural environments similar to the conditions it will be exposed to.

Safety Brake: Our unique rotational inertia driven torsion switch brake and freewheeling system automatically engages when the lever hoist feels the slightest resistance or load. This key feature means that the SS11 will raise, hold and lower the lightest of loads without slipping. The two stage process protects against accidental light load failures by putting the hoist into neutral whilst under load. This highly efficient method of operating is not only safer but easier for the operator whilst measurably increasing the brake take up efficiency rate. The bonded marine friction discs are free of asbestos and have been developed and designed for subsea use creating a highly efficient, reliable braking surface for use in the most extreme conditions.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist â&#x20AC;&#x201C; SS11

Light Load Protection: The unique brake system designed for the SS11 guarantees a light load protection at 2% of the rated capacity.

Patent Protected Quad Cam Brake Pawl System: This patented development in brake efficiency guarantees permanent engagement of at least one of the two reciprocating cam pawls fitted to the SS11, ensuring the pawl only just clears the ratchet wheel, with the minimum of clearance as required under BS 4898:1973. But most importantly, in the unlikely event of a pawl spring failure, this new design will ensure the brake is still fully functional and the load is sustained without damage to the mechanism.

Brake Efficiency: Tiger uniquely uses an 8 point multi start thread pinion shaft which has measurably increased the efficiency in brake reaction times - up to 50% measurable difference compared with longitudinal 4 point pinion threads.

Overload Protection: The SS11 lever hoist can be fitted with a slipping clutch overload mechanism to protect it from overload. When the load limit is exceeded, the clutch in the chain wheel will slip, allowing the handle to be operated whilst not engaging the gear box. This prevents further lifting of the load, though lowering is still possible. The SS11 with overload protection is DNV GL Verification tested according to NORSOK R-002.

One Piece Construction Pinion Gears: SS11 gearboxes contain one piece pinion gears. This revolutionary process in gear manufacturing uses drop-forged raw material, precision machined and heat treated with precise ratios between teeth and body.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Hooks: Our hooks incorporate our latest Patent Pending “EZ Check” feature which allows operators and inspection engineers to easily check to see if the hoist has been previously overloaded or shock loaded by simply measuring between the triangle of pop marks. Our drop forged and heat treated alloy hooks are furnished with heavy duty spring latch kits that fully engage into the recessed nose of the hook safeguarding the load when side loading of the latch occurs and offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts & bolts allowing for complete inspection during any statutory inspection or written scheme maintenance. The entire hook fitting has been protected using OCP or stainless steel fixtures and fittings. Available with hooks that swivel under the full working load limit, to meet relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.

Brake Chamber Protection: Precisely engineered side plates and components protected by a full gasket give the SS11 brake chamber and contents maximum protection from external contamination.

Load Chains: Tiger only use the highest quality alloy, calibrated load chains in Grade T or VH conforming to EN818-7 and ISO 16872. The SS11 comes as 3.0mtr HOL as standard but can be chained up to whatever length is required. Stainless steel load chain available on request for certain capacities.

Protection and Finish: Critical internal components are protected by our OCP (Organic Compound Protection) finish giving unprecedented long term reliability. Stainless steel fittings are used throughout the hoist. These ensure the initial capital outlay of purchasing the SS11 is protected by allowing the statutory inspections and recertifications to be easier and also help with the overall aesthetics of the hoist being maintained in an “as new” condition. The SS11 is finished in our high quality white Akzo Nobel powder coat paint offering excellent additional corrosion protection and a high degree of impact protection.

High Performance Premium Grease: Load carrying ability, mechanical stability, corrosion protection, water resistance and increased operating temperature ranges are all improved by the using only the very best lubricant.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Handle: The SS11 handle which interfaces with the operator is ergonomically designed for efficiency and ease of use and reduces the likelihood of a gloved hand from slipping off the end of the handle. It also helps prevent the use of unauthorised extension/cheater bars that could facilitate an overload on a non-overload protected SS11. Tiger lever hoist handles are ultra-strong, with strengthening side ribs. This special feature: •

Protects against impact damage

Protects the label

Eliminates torsion

Forgings: Recessed hook yoke forgings offer full protection to the load chain anchor bolts on all our bottom hooks.

Chain End Anchorage: Tiger have incorporated the ultimate safeguarding of a single point failure mode as described in IMCA DO28 Rev. 1 Note 7.2 by installing a specially designed adjustable chain end stop. Tiger have specifically profiled and manufactured this item to fit the contours of the hoist. This offers complete assurance to the operator, whilst maintaining the flexibility of “freewheeling” the chain to any required starting position.

Chain Guide: Specifically designed to guide the load chain safely onto or off the load sheave without snagging or jamming, the fluted chain stripper allows the safe use of the SS11 when used in any orientation.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Performance: The SS11 lever hoist has undergone a full test program that includes: Type Testing •

Ultimate strength test, at least 4 times the Working Load Limit (WLL)

Chain end anchorage test, passing at least 4 times the WLL without any restriction of the brake or gears

Test on every hoist •

Proof loading at 1.5 times the rated capacity

Light load testing at maximum of 2% rated capacity

Specifications: Product Code

Rated

Effort

Capacity

kg

tonne WHS-L-0080-030-TGSS

0.8

Load Chain Diameter

WHS-L-0160-030-TGSS

1.5

26

WHS-L-0320-030-TGSS

3.0

38

WHS-L-0630-030-TGSS

6.0

40

WHS-L-1000-030-TGSS

10.0

47

WHS-L-1500-030-TGSS

15.0

WHS-L-2000-030-TGSS

20.0

Mass @

Mass for extra

HOL

std HOL

metre HOL

m

kg

kg

9.0

0.9

No. of Falls

⌀ mm

23

Standard

6.3

1

3

7.1

1

3

12.5

1.1

10.0

1

3

22.0

2.2

10.0

2

3

34.5

4.3

3

3

55.0

6.5

44

10.0 10.0

5

3

128.0

10.8

49

10.0

6

3

174.0

13.1

Technical Data: Dimensions mm

Product Code A

B

C

D

E

F1

F2

WHS-L-0080-030-TGSS

128

243

295

158

99

28

45

WHS-L-0160-030-TGSS

154

370

320

172

104

34

51

WHS-L-0320-030-TGSS

182

370

400

195

108

36

56

WHS-L-0630-030-TGSS

242

370

570

195

108

49

70

WHS-L-1000-030-TGSS

379

370

630

195

108

54

87

WHS-L-1500-030-TGSS

566

370

840

195

108

59

81

WHS-L-2000-030-TGSS

470

370

1050

250

160

81

110

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist â&#x20AC;&#x201C; SS11

Technical Drawings:

Tiger_LeverBlock_SS11_D032019

0.8t

1.5t

3.0t

6.0t

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist â&#x20AC;&#x201C; SS11

10.0t

15.0t

20.0t

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Subsea Lever Hoist – SS11

Hook Technical Data: Capacity

Collar measurements

Hook thickness at point

Hook Throat

“EZ Check”

mm

shown in diagram

Opening

measurement

mm

mm

mm

e

f

tonne a

b

c

d

0.8

8

13.5

23

75

34

52

1.5

10

15.5

26

21

39

59

3.0

12.5

20

37

32

42

76

6.0

19

30

43

36

58

86

10.0

20

33

52

48

70

121

15.0

-

36

67

60

67

130

20.0

-

48

77

72

90

162

Traditional Tiger Hooks

Tiger Hooks with new “EZ Check 3 point marking system

Newer models of the SS11 are fitted with the patent pending Tiger “EZ Check” 3 point marking system. With this system a quick check that the A and B measurements are the same (as shown in the diagram opposite) will indicate if the hooks have stretched if A≦B the hook is fine; If A>B the hook needs to be replaced.

Tiger_LeverBlock_SS11_D032019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Industrial Air Hoist Home of the Tiger hoisting and winching range Tiger industrial air hoists are designed specifically for industrial and general engineering applications such as automotive plants, foundries, heat treatment plants, zinc refineries and acid battery manufacturing facilities. The hoists operate at air pressures of between 4 and 6 bar. They comply with the requirements of SANS 1638, AMSE B30.16 and EN14492-2. The manufacturing facility producing the hoists is ISO9001, ISO14001 & OHSAS18001 certified.

Main Features: •

Range – 0.25 tonne to 20 tonne

Reliable, fast, efficient, quiet and lightweight

Greater than 5:1 factor of safety

Load Limiter Integral load limiter which automatically prevents the operator lifting a load of more than 130% of the working load limit. Load limiter is 100% repeatable at all working pressures and does not wear or generate damaging heat.

Emergency Stop All hoists can be supplied with an emergency stop device as an option. This shuts off the main air supply to the hoist when activated. Resetting the device will not automatically restart the hoisting operation.

Precise Control Accurate and precise positioning of loads is standard for both toggle and pendent control models.

Fail Safe Disc Brake Non-asbestos self-adjusting disc brake is applied automatically when the air supply to the hoist is shut off. The brake is self-adjusting for the life of the brake and can hold off more than 125% of the working load limit.

Integral Silencer The exhaust air silencer is built into the hoist gearbox housing and limits the noise level to 83dB(A).

Tiger_AirHoists_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Industrial Air Hoist Load Chain Grade 8 load chain ensures stringent high-speed duty cycles can be met. The load chain is in accordance with the requirements of SANS/ISO 3077 and EN818-7 Appendix B.

Vane Motor Assisted vane lifting ensures maximum starting torque when starting under load.

Sealed Gearbox The sealed planetary gearbox ensures that the most stringent duty cycles can be met. The gears are heat treated and mounted on high strength, low friction bearings

Ease of Maintenance The modular design of the hoist allows easy access to internal components such as the motor, gearbox, brake and load limiter. Common parts are used throughout the range. HAI Range – 0.25, 0.5, 1.0, 2.0 tonne Technical Data (at 6 bar) Model No. Lifting Capacity (tonne) Falls of Chain Chain Size Total Weight* Full Load Lifting Speed

HAI252

HAI520

HAI1200

HAI12/20

0.25

0.5

1.0

2.0

1

1

1

2

7.1x21.2mm

7.1x21.2mm

7.1x21.2mm

7.1x21.2mm

25.0kg

25.0kg

25.0kg

32.8kg

22.5

15.0

7.5

3.8

32.0

29.5

16.0

8.0

31.0

36.0

20.4

10.2

25.0

23.0

13.0

6.5

2.1

2.1

2.1

2.1

(m/min) No Load Lifting Speed (m/min) Full Load Lowering Speed (m/min) No Load Lowering Speed (m/min) Air Consumption (m³/min) Air Connection Supply Hose (Inside ø)

16.0mm

16.0mm

16.0mm

76

76

76

76

A

312mm

312mm

312mm

312mm

Sound Level (dB(A)) Dimensions

G½ 16.0mm

B

216mm

216mm

216mm

216mm

C

135mm

135mm

135mm

135mm

D

85mm

85mm

85mm

85mm

E

196mm

196mm

196mm

196mm 370mm

Min F

370mm

370mm

370mm

Min G

420mm

420mm

420mm

-

Min H

-

-

-

495mm

*Weight of HAI model includes 3m lift, 2m toggle control. For longer lifts add 1.1kg for HAI252, HAI520 and HAI1200 models and 2.2kg for HAI12/20 per meter of lift. For pendent control add 0.8kg.

Tiger_AirHoists_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Industrial Air Hoist HAI33 Range – 3.0, 6.0, 10.0 tonne Technical Data Model No. Lifting Capacity (tonne) Falls of Chain Chain Size Total Weight* Full Load Lifting Speed

HAI3300

HAI33/60

HAI33/100

3.0

6.0

10.0

1

2

3

13x36mm

13x36mm

13x36mm

59.5kg

82.5kg

122.5kg

4.8

2.4

1.5

3.0

1.5

0.9

6.4

3.2

2.0

7.0

3.5

2.3

5.4

2.7

1.7

4.0

4.0

4.0

2.6

2.6

2.6

(m/min) @ 6 bar † Full Load Lifting Speed (m/min) @ 4 bar † No Load Lifting Speed (m/min) @ 6 bar † Full Load Lowering Speed (m/min) @ 6 bar † No Load Lowering Speed (m/min) @ 6 bar † Air Consumption (m³/min) @ 6 bar Air Consumption (m³/min) @ 4 bar Air Connection Pendent Control

G1

G1

G1

Toggle Control & E/Stop

25mm

25mm

25mm

83

83

83

446mm

446mm

446mm

Supply Hose (Inside ø) Sound Level (dB(A)) Dimensions

A B

215mm

234mm

366mm

C

108mm

137mm

243mm

D

-

97mm

123mm

E

-

259mm

315mm

Min F

465mm

-

-

Min G

-

630mm

786mm

*Weight of HAI3200 model includes 3m lift, 2m toggle control. For longer lifts add 3.8kg per metre of lift. *Weight of HAI32/60 and HAI32/100 model includes 3m lift, 2m toggle control. For longer lifts add 7.6kg for the HAI32/60 and 11.4kg fo the HAI32/100 per metre of lift. † Speeds listed are for toggle control, single lower hook models.

Tiger_AirHoists_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Industrial Air Hoist HAI52 Range – 5.0, 10.0, 16.0, 20.0 tonne Technical Data Model No. Lifting Capacity (tonne) Falls of Chain Chain Size Total Weight* Full Load Lifting Speed

HAI5200

HAI52/100

HAI52/160

HAI52/200

50.

10.0

16.0

20.0

1

2

3

4

16x45mm

16x45mm

16x45mm

16x45mm

106kg

152kg

245kg

288kg

3.0

1.5

0.9

0.7

1.9

0.9

0.6

0.4

4.0

2.0

1.1

0.9

4.4

2.2

1.3

1.0

3.3

1.7

1.0

0.8

4.0

4.0

4.0

4.0

2.6

2.6

2.6

2.6

(m/min) @ 6 bar † Full Load Lifting Speed (m/min) @ 4 bar † No Load Lifting Speed (m/min) @ 6 bar † Full Load Lowering Speed (m/min) @ 6 bar † No Load Lowering Speed (m/min) @ 6 bar † Air Consumption (m³/min) @ 6 bar Air Consumption (m³/min) @ 4 bar Air Connection Pendent Control

G1

G1

G1

G1

Toggle Control & E/Stop

25mm

25mm

25mm

25mm

83

83

83

83

A

503mm

503mm

616mm

616mm

Supply Hose (Inside ø) Sound Level (dB(A)) Dimensions

B

300mm

270mm

290mm

280mm

C

230mm

170mm

180mm

165mm

D

-

100mm

110mm

115mm

E

-

286mm

325mm

325mm

Min F

600mm

-

-

-

Min G

-

790mm

905mm

920mm

*Weight of HAI5200 model includes 3m lift, 2m toggle control. For longer lifts add 5.7kg per metre of lift. *Weight of HAI52/100, HAI52/160 and HAI52/200 model includes 3m lift, 2m toggle control. For longer lifts add 11.4kg for the HAI52/100, 17.1kg for the HAI52/160 and 22.8kg for the HAI52/200 per metre of lift. * For pendent control add 0.8kg.

Tiger_AirHoists_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Girder Clamp 1 Tonne – 10 Tonne

Main Features: •

Low profile design to maximise headroom

Wide Adjustment Range to suit most common beam sizes

Lightweight and high strength

Stainless Steel ID plates and rivets suitable for underground mining applications

ZERO HARM Product Features: •

Lightweight design to minimise risk of injury during overhead installation

Unique serial number and test certificate with each unit

Comprehensive instruction manual supplied with each unit

Designed and tested to comply with the requirements AS4991

Specifications: Bullivants Mfr No.

Rated Capacity

Beam Range

Unit Weight

tonne

mm

kg

WGC-0100-075-220-BV

1.0

75 – 220

3.8

WGC-0200-075-220-BV

2.0

75 – 220

4.6

WGC-0300-080-320-BV

3.0

80 –320

9.0

WGC-0500-080-320-BV

5.0

80 – 320

11.0

WGC-1000-090-320-BV

10.0

90 – 320

16.0

BV_GirderClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Girder Clamp 1 Tonne â&#x20AC;&#x201C; 10 Tonne Dimensions: Bullivants Mfr No.

Safe

Beam

A

Working

Width

Max

Min

B Max

Limit

mm

mm

mm

mm

C

D

E

mm

mm

mm

F Min

Max

mm

mm

G

H

mm

mm

kg WGC-0100-075-220-BV

1000

75-220

260

180

360

64

5

215

102

155

25

22

WGC-0200-075-220-BV

2000

75-220

260

180

360

74

6

215

102

155

25

22

WGC-0300-080-320-BV

3000

80-320

354

235

490

103

8

260

140

225

45

24

WGC-0500-080-320-BV

5000

80-320

354

235

490

110

10

260

140

225

45

28

WGC-1000-090-320-BV

10000

90-320

365

320

505

120

12

280

170

235

50

40

Technical Drawings:

BV_GirderClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Fixed Jaw Heavy Duty Beam Clamp with Shackle - BCF Home of the Tiger hoisting and winching range

15t unit with

10t unit

locking device

3t low headroom unit

Main Features •

Range from 1.0t to 30.0t

Quick and versatile rigging point for hoisting equipment

Shackle suspension point

Suitable for pulling and lifting at angles across the beam

Up to 90° side loading with no deration

15° cross loading with no deration

Highly flexible – for lifting, pulling or as a semi-permanent anchor point

Evenly distributed loads achieved through maximum jaw surface area

Multidirectional adjusting screw spindle ensures a high clamping force to

the various flange sizes within its capacity

Beam width range 75mm to 457mm

Operating temperature of -50°C to +50°C

4:1 factor of safety

Optional locking device for 1t-10t (as standard on 15t-30t)

Heavy duty fixings and marking

These units meet and exceed all the requirements within BS EN 13155:2003+A2:2009 and AS4991.

Tiger_BemClampwithShackle_DS042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Fixed Jaw Heavy Duty Beam Clamp with Shackle - BCF Certification Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. NO reduction in working load limits when side loads applied:

No deration up to 90° has been established for Tiger BCF model clamps and applies only for overhead beam attachments. It DOES NOT apply when used for lifting beams. Our Tiger BCU clamp has been specifically designed for this purpose. We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.

Technical Data Product Code

Capacity tonne

Dimensions mm

Net

A

B

C

D

E

F

H

J

K

L

75-195

206-321

105

20

190

300-266

16

21

80

84

M

T 6

Weight kg

WGC-0100-075-195-BCF

1.0

5.5

WGC-0200-075-190-BCF

2.0

75-190

206-321

105

20

190

311-276

18

21

88

95

8

6.5

WGC-0300-100-350-BCF

3.0

100-350

223-476

140

25

270

418-344

22

27

110

105

10

12.0

WGC-0300-075-190-BCF

3.0

75-190

216-325

140

20

190

310-271

22

27

110

105

10

9.5

WGC-0500-100-310-BCF

5.0

100-310

223-438

140

25

286

424-368

27

27

124

111

12

14.5

WGC-0500-075-190-BCF

5.0

75-190

216-325

140

20

190

315-276

27

27

124

111

12

11.0

WGC-1000-120-350-BCF

10.0

120-350

282-511

210

30

314

460-389

32

37

83

120

16

26.5

WGC-1500-203-457-BCF

15.0

203-457

463-742

250

36

416

644-558

38

44

99

146

400

20

76.0

WGC-2000-203-457-BCF

20.0

203-457

471-766

300

50

416

697-609

45

49

126

179

410

25

100.0

WGC-3000-203-457-BCF

30.0

203-457

483-800

390

63

416

742-648

50

57

138

197

416

20

152.0

T= beam clamp side plate thickness D= maximum beam flange thickness

Tiger_BemClampwithShackle_DS042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Fixed Jaw Heavy Duty Beam Clamp with Shackle - BCF Technical Drawing 1t-5t

Technical Drawing 10t

Tiger_BemClampwithShackle_DS042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Fixed Jaw Heavy Duty Beam Clamp with Shackle - BCF Technical Drawing 15t and 20t

Technical Drawing 30t

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.

Tiger_BemClampwithShackle_DS042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Heavy Duty Split Cam Beam Clamp - BCU Home of the Tiger hoisting and Winching range Main Features •

Range from 3.0t to 10.0t WLL

Quick and versatile rigging point for hoisting equipment

Suitable for pulling and lifting at angles across the beam

Up to 90° side loading with no reduction in WLL

90° cross loading with no deration

Highly flexible – for lifting, pulling or as a semi-permanent anchor point

Evenly distributed loads achieved through maximum jaw surface area

Adjusting screw spindle ensures a high clamping force to the various flange sizes within its capacity

Beam width range 125mm to 305mm

Operating temperature of -50°C to +50°C

4:1 factor of safety

Heavy duty fixing and markings

Meet and exceed all requirements of AS4991

Certification Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

NO reduction in working load limits when side loads applied: No deration up to 90° has been established for Tiger BCF model clamps and applies only for overhead beam attachments. It DOES NOT apply when used for lifting beams. Our Tiger BCU clamp has been specifically designed for this purpose. We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.

Fixed Jaw

Cam

Adjusting screw Open position Locking pin

Adjusting screw

Tiger Beam Clamp_BCU_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Heavy Duty Split Cam Beam Clamp - BCU Technical Data:

5t

3t Product Code

10t

Capacity tonne

Dimensions mm A

B

C

D

E

Weight

F

G

H

J

K

L

kg

WGC-0300-125-204-BCU

3.0

387

60

70

63

32

235

100

25

28

20

125-204

15.5

WGC-0500-125-305-BCU

5.0

524

70

74

72

32

270

120

25

38

24

125-305

27.0

WGC-1000-125-305-BCU

10.0

524

70

75

82

32

278

120

25

38

25

125-305

38.0

E= beam clamp side plate thickness H= maximum beam flange thickness

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please contact your Bullivants sales team when ordering.

Tiger Beam Clamp_BCU_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Bulb Clamps Tiger Bulb Clamps are designed for attaching to bulb profiles of bulb flat bars which are often found in ship compartments, engine rooms and overhead bridge deck structures. The bulb clamp provides a semipermanent lifting point. The large integrated shackle gives easy 1.5t

connection for all different types of lifting machines.

Main Features: • 1.5t and 3.0t capacities available • Quick and versatile rigging point for hoisting equipment when attached to bulb flat bars approved for lifting applications • Shackle suspension point • No tools required – integrated adjusting screw spindle • Operating temperature of -50°C to +50°C • Up to 45° side loading with no deration

3.0t

• 15° cross loading with no deration • 4:1 factor of safety, even at the above angles • Complies with BS EN 13155:2003 • Not suitable for lifting Tiger Bulb Clamp can be side loaded up to 45° and cross loaded up to 15° without derating the unit, whilst still maintaining a 4:1 safety factor.

Warning: Ensure the handle is fully tight before commencing operation.

Recommendation: We advise that structural calculations are carried out on all beams/bulb flat bars and supporting steel work by qualified engineering departments to ensure safe operation.

Tiger Bulb Clamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Bulb Clamps Marking:

Specifications:

Bullivants Mfr No.

Capacity tonne

Dimensions mm

Weight

A

B

C

D

E

F

G

kg

WBCB-0150-TG

1.5

160-240

36

173-200

125-151

58

71

22

3.6

WBCB-0300-TG

3.0

240-320

42

214-241

155-182

68

94

25

6.4

Technical Drawings:

Tiger Bulb Clamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Push Trolley 500kg – 10 Tonne

Main Features: •

Wide Adjustment Range to suit most common beam sizes

Extra wide 10 tonne unit available

Lightweight and high strength

Low profile design

Stainless Steel ID plates and rivets suitable for underground mining applications

ZERO HARM Product Features: •

Designed and tested in accordance with the AS1418.2

Unique serial number and test certificate with each item

Comprehensive instruction manual supplied with each unit

Bullivants Mfr No.

Rated Capacity

Beam Range

Unit Weight

tonne

mm

kg

WPT-0050-068-203-BV

0.5

68 - 203

6.3

WPT-0100-068-203-BV

1.0

68 – 203

10.4

WPT-0200-088-203-BV

2.0

88 – 203

16.7

WPT-0300-110-203-BV

3.0

110 – 203

27.5

WPT-0500-116-203-BV

5.0

116 – 203

44.4

WPT-1000-130-203-BV

10.0

130 – 203

76.0

WPT-1000-200-305-BV

10.0

200 - 305

83.0

BV_GeraredTrolley_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Push Trolley 500kg â&#x20AC;&#x201C; 10 Tonne Technical Data: Capacity

0.5t

1t

2t

3t

5t

10t

Beam Width

68-203

68-203

88-203

110-203

116-203

130-203

A

336.5

356.5

369

388

405.5

432

B

212

248

293

350

382

467

C

184

223.5

267.5

322

372

483

Headroom

D

22

28

34

42

46

72

E

29.5

30

30

34.5

36.5

40

F

3

3

3

3

5

5

G

102.5

123

147

173.5

200

273

0.8m

1.0m

1.4m

1.0m

1.2m

Min Curve Radius

0.6m

All Dimensions in mm unless otherwise noted

Technical Drawing:

BV_GeraredTrolley_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Geared Trolley 500kg – 10 Tonne

Main Features: •

Lightweight and high strength

Wide Adjustment Range to suit most common beam sizes

Extra wide 10 tonne unit available

Low profile design

Stainless Steel ID plates and rivets suitable for underground mining applications

Standard hand chain length – 2.5m

ZERO HARM Product Features: •

Designed and tested in accordance with the AS1418.2

Unique serial number and test certificate supplied with each item

Comprehensive instruction manual supplied with each unit Bullivants Mfr No.

Rated Capacity tonne

Beam Range

Unit Weight

mm

kg

WGT-0050-068-203-BV

0.5

68 – 203

7.4

WGT-0100-068-203-BV

1.0

68 – 203

12.0

WGT-0200-088-203-BV

2.0

88 – 203

18.0

WGT-0300-110-203-BV

3.0

110 – 203

30.0

WGT-0500-116-203-BV

5.0

116 – 203

47.0

WGT-1000-130-203-BV

10.0

130 – 203

79.0

WGT-1000-200-305-BV

10.0

200 - 305

86.0

BV_GeraredTrolley_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Geared Trolley 500kg â&#x20AC;&#x201C; 10 Tonne Hand Chain: Bullivants Mfr No.

Description

Suits

WHC-050ZS

Zinc Plated 5mm x 23.7mm Hand Chain

All Blocks

WCON-A-05-25-TG

Corrosion Resistant Hand Chain Joiner

All Blocks

Technical Data: Capacity

0.5t

1t

2t

3t

5t

10t

Beam Width

68-203

68-203

88-203

110-203

116-203

130-203

A

336.5

356.5

369

388

405.5

432

B

212

248

293

350

382

467

C

184

223.5

267.5

322

372

483

D

22

28

34

42

46

72

E

29.5

30

30

34.5

36.5

40

F

3

3

3

3

5

5

G

102.5

123

147

173.5

200

273

0.6m

0.8m

1.0m

1.4m

1.0m

1.2m

13.9kg

20.7kg

33.3kg

47.9kg

Min Curve Radius Net Weight

9.4kg

All Dimensions in mm unless otherwise noted

Technical Drawings:

BV_GeraredTrolley_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Trolley Home of the Tiger hoisting and winching range

20t Geared Trolley

3t Plain Trolley

Main Features: • Tiger trolleys are designed to provide smooth and easy traversing • The anti-drop plates design ensures extra safety, and also prevents damage to wheels when contacting end rail stoppers • Wheels run on sealed ball bearings for smoother rolling with less effort and maintenance • Twin bar or single bar trolleys available • Geared type available • Plain Trolley Range from 0.5t to 10.0t • Geared Trolley Range from 0.5t to 20.0t • Extended beam width available • Corrosion or Spark Resistant versions available

These units meet and exceed all the requirements within BS EN 13157: 2004+A1:2009 and AS1418.2.

TigerTrolley_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Trolley Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

Single Bar Trolleys Technical Data

Technical Drawings â&#x20AC;&#x201C; Single Bar Trolleys

Plain Single Bar Trolley

Geared Single Bar Trolley

Twin Bar Trolleys

TigerTrolley_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Trolley Technical Data

(0.5t-2t twin bar available as special orders)

Technical Drawings – Twin Bar Trolleys 0.5t – 10.0t

Plain Twin Bar Trolley

Geared Twin Bar Trolley

Technical Drawings – Twin Bar Trolleys 20.0t

TigerTrolley_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Trolley Photo Gallery

20t Geared Trolley

10t Geared Trolley (rear)

3t Geared Trolley

Spark Resistant option

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with you Bullivants Sales Representative when ordering.

TigerTrolley_DS210219

1300 LIFTING

info@bullivants.com www.bullivants.com


Trolley Clamp 1 Tonne – 10 Tonne

Main Features: •

Convenient and quick adjustment

Wide Adjustment Range to suit most common beam sizes

Unique serial number and test certificate with each unit

Comprehensive instruction manual supplied with each unit

Designed and tested to comply with the requirements AS4991

Stainless Steel ID plates and rivets suitable for underground mining applications

Specifications: Bullivants Mfr No.

Rated Capacity

Beam Range

Unit Weight

tonne

mm

kg

WBT-0100-064-203-BV

1.0

64 – 203

14.7

WBT-0200-076-203-BV

2.0

76 – 203

29.4

WBT-0300-076-203-BV

3.0

76 –203

44.1

WBT-0500-100-305-BV

5.0

100 – 305

61.3

WBT-1000-150-305-BV

10.0

150 – 305

122.6

BV_TrolleyClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Trolley Clamp 1 Tonne – 10 Tonne Dimensions: Bullivants Mfr No.

Beam Range

C

D

H

Ø

F

mm

mm

mm

mm

mm

mm

WBT-0100-064-203-BV

64-203

46

242

297

22

3

WBT-0200-076-203-BV

76-203

55

281

318

22

3

WBT-0300-076-203-BV

76-203

62

328

351

24

3

WBT-0500-100-305-BV

100-305

71

377

455

28

5

WBT-1000-150-305-BV

150-305

71

455

500

42

5

Technical Drawings:

BV_TrolleyClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Adjustable Trolley – Plain Trolley APT Home of the Tiger hoisting and winching range Main Features: •

Range from 1.0t to 10.0t

Fitted with a screw spindle which allows lockable adjustment to the various flange sizes within its capacity

The anti-drop plates design ensures extra safety, and also prevents damage to wheels when contacting end rail stoppers

Wheels run on sealed bearings for smoother rolling with less effort and maintenance

Locking device with high clamping force

Operating temperature of -30°C to +50°C (temperature range of -50°C to +50°C available as an option)

The 5:1 factor of safety allows for use with manual or powered hoists

These units meet and exceed all the requirements of AS1418.2

1.0t-6.0t Trolleys

10t Trolley

Derations to apply for using at angles away from the vertical

Tiger_Adjustable Trolley APT_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Adjustable Trolley â&#x20AC;&#x201C; Plain Trolley APT Technical Data: Track Width range

Dimensions

Capacity

mm

mm

tonne

A

B

WBT-0100-075-210-TG

1.0

75-210

391

83

16

WBT-0200-075-210-TG

2.0

75-210

391

94

18

Product Code

C

D

E

Min. Curve

F

G

110

81

255-208

123

89

276-227

Ratio

Weight

J

mm

kg

73

27

1.0

9.5

79

38

1.3

13.5 23.0

H

WBT-0300-075-210-TG

3.0

75-210

403

105

22

141

112

288-241

99

35

1.5

WBT-0600-105-305-TG

6.0

105-305

521

111

27

152

125

358-290

115

46

1.5

35.5

WBT-1000-160-305-TG

10.0

160-305

606

119

32

170

83

407-352

157

33

2.7

118.0

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Bullivants sales team when ordering.

1.0t-6.0t Adjustable Plain Trolley (APT)

10t Adjustable Plain Trolley (APT)

Tiger_Adjustable Trolley APT_DS112019

1300 LIFTING

info@bullivants.com www.bullivants.com


Screw Cam Clamp 0.5 Tonne – 6.3 Tonne

Main Features: • Multi use clamps that can be used in applications such as lifting, suspension, lateral (horizontal) pulling and turning of steel • Equipped with a screw cam which provides a powerful clamping force on a work piece even when vibrations occur during operation • Manufactured in Japan

ZERO HARM Product Features: • Fitted with a visual indicating device to confirm minimum tightening torque is applied for safe use • The torque sensing indicator is luminescent providing an additional safety check allowing visibility to confirm the clamp is tightened correctly when used in poor lighting conditions.

Torque Sensing Indicator to confirm correct tightening force:

Non-Aligned (non-alignment of lines) Before tightening

BV_ScrewCamClamp_DS022020

Aligned

Luminescent

(lines aligned)

indicators

After tightening (correct position)

1300 LIFTING

info@bullivants.com www.bullivants.com


Screw Cam Clamp 0.5 Tonne â&#x20AC;&#x201C; 6.3 Tonne Specifications: Bullivants Mfr No.

Rated Capacity

Clamp Range

Unit Weight

tonne

mm

kg

WPC-U-0050-00-25-BV

0.5

0~25

1.9

WPC-U-0100-00-40-BV

1.0

0~40

3.6

WPC-U-0200-00-40-BV

2.0

0~40

4.8

WPC-U-0320-00-40-BV

3.2

0~40

7.0

WPC-U-0630-00-50-BV

6.3

0~50

16.0

Dimensions:

Rated

L

L2

H

H1

H2

D1

D2

T1

T2

S

Capacity

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

tonne 0.5

158

89

121

71.5

30

27

27

46

13

17

1.0

208

121

161

94

45

32

32

54

14

21

2.0

227

121

177

105

45

36

32

60

18

21

3.2

252

136

196

118.5

50

45

35

64

20

21

6.3 t

291

152

225

132

55

50

41

90

43

21

Applications:

BV_ScrewCamClamp_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Universal Plate Clamp 1 Tonne – 8 Tonne

Main Features: •

For vertical lifting and transporting of steel plates

Able to be used up to 60º from vertical once de-ratings have been taken into account (refer operating manual)

Unique serial number and test certificate with each unit

Comprehensive instruction manual supplied with each unit

Designed and tested to comply with the requirements AS4991

Suitable for steel plate with hardness below HRC 30/ Brinell 300

ZERO HARM Product Features: • High Visibility Colour contrast Lifting Point and Lever Lock • Equipped with pre-tension spring mechanism and locking lever prevents slippage during attachment and lowering

Specifications: Bullivants Mfr No.

Rated Capacity

Jaw Opening

Unit Weight

tonne

mm

kg

WPC-U-0100-00-20-BV

1.0

0 – 20

5.0

WPC-U-0200-00-25-BV

2.0

0 – 25

8.0

WPC-U-0320-00-30-BV

3.2

0 – 30

15.0

WPC-U-0500-00-50-BV

5.0

0 – 50

23.0

WPC-U-0800-00-45-BV

8.0

0 – 45

37.0

BV_UniversalPlateClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Universal Plate Clamp 1 Tonne – 8 Tonne Dimensions: Bullivants Mfr No.

Jaw Opening

T mm

U mm

V mm

L mm

R mm WPC-U-0100-00-20-BV

0 – 20mm

Unit Weight kg

300

50

145

66

5.0

WPC-U-0200-00-25-BV

0 – 25mm

385

68

175

75

8.0

WPC-U-0320-00-30-BV

0 – 30mm

430

75

215

102

15.0

WPC-U-0500-00-50-BV

0 – 50mm

500

68

232

112

23.0

WPC-U-0800-00-45-BV

0 – 45mm

600

88

290

125

37.0

Technical Drawings:

BV_UniversalPlateClamp_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Horizontal Plate Clamp 1.5 Tonne – 10 Tonne (per pair) Main Features: •

For horizontal lifting and transporting of steel plates

Large jaw operations for unrivalled flexibility

Must be used in pairs (sold individually)

Suitable for steel hardness below HRC 30/Brinell 300

ZERO HARM Product Features: •

Unique serial number and test certificate with each unit

Comprehensive instruction manual supplied with each unit

Designed and tested to comply with the requirements AS4991

Specifications: Bullivants Mfr No.

Rated

Jaw

Unit

Capacity

Opening

Weight

tonne*

mm

kg

1.5

0 – 60

6.5

WPC-H-0320-00-60-BV

3.2

0 – 60

10.0

WPC-H-0500-00-60-BV

5.0

0 – 60

15.5

WPC-H-1000-00-60-BV

10.0

0 – 60

28.0

WPC-H-0150-00-60-BV

*Rated capacity is based on a maximum sling angle of 60 degrees. Refer to the user manual for reduction in WLL in excess of 60 degrees sling angle

Dimensions: Bullivants Mfr No.

Dimensions mm

Net Weight

A

B

C

D

E

F1

WPC-H-0150-00-60-BV

320

180

80

16

120

25

7.5

WPC-H-0320-00-60-BV

303

220

90

18

145

30

10.0

WPC-H-0500-00-60-BV

310

220

110

25

135

30

15.5

WPC-H-1000-00-60-BV

330

220

130

30

135

40

23.0

BV_HorizontalPlateClamp_DS032020

kg

1300 LIFTING

info@bullivants.com www.bullivants.com


Heavy Duty Lifting Bag

Main Features: • Extra heavy duty Ripstop canvas, double layer base and side reinforcing • Grade 80 Certified Masterlink • Stencilled with SWL and Bullivants • MDF base • Tags with individual serial numbers • Provided with test certificates

Option Extras: • Plastic base • Drawcord throat • Larger capacity and special bag sizes made to order

Specifications: Bullivants Mfr No. WLIF-HDB-LG50HV

BV_HeavyDutyLIftingBag_DS032020

Rated Capacity

Diameter

Height

kg

mm

mm

50.0

300

400

1300 LIFTING

Safety Factor 4:1

info@bullivants.com www.bullivants.com


Tiger Air Winches WAR-I Series 500 to 3000kg Versatile Air Winches Tiger WAR-I series air winches are designed specifically for mining, construction, marine and general engineering applications. The compact design of the winches allows them to be installed quickly where required in any orientation. The winches have a factor of safety in excess of 5 at the rated load. Extended drum versions are available for increased rope capacity. They comply with the requirements of ASME B30.7. The manufacturing facility producing the winches is ISO9001, ISO14001 & OHSAS18001 certified.

Main Features: Load Limiter Integral load limiter which automatically prevents overloading of the winch. Load limiter is 100% repeatable at all working pressures and does not wear or generate damaging heat Emergency Stop Winches can be supplied with an emergency stop device as an option. This shuts off the main air supply to the winch when activated. Precise Control Lever control and pilot pendent control offer variable speed control. Accurate and precise positioning of loads is standard for all models. Integral Silencer The exhaust air silencer is built into the winch frame and limits the noise level to 80dB(A).

Tiger_AirWinch_War_DS180219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Air Winches WAR-I Series 500 to 3000kg Fail Safe Disc Brake Non-asbestos self adjusting disc brake is applied automatically when the air supply to the winch is shut off. The brake is self adjusting for the life of the brake and is capable of holding in excess of 125% of the working load limit. Vane Motor Assisted vane lifting ensures maximum starting torque when starting under load. Sealed Gearbox The sealed planetary gearbox ensures that the most stringent duty cycles can be met. The gears are heat treated and mounted on high strength, low friction bearings. Ease of Maintenance The modular design of the winch allows easy access to internal components such as the motor, gearbox, brake, load limiter and drum assembly. Common parts are used throughout the range.

Specifications @ 6 bar Model No.

WAR500I

WAR1000I

WAR2000I

WAR3000I 3000kg

500kg

1000kg

2000kg

Rope Speed at Rated Load (m/min)

28.10

13.90

6.70

4.60

Full Drum No Load Speed (m/min)

60.30

28.20

18.50

9.00

Half Drum Line Pull

Air Consumption (m³/min)

4.0

4.0

4.0

4.0

Air Connection

25mm

25mm

25mm

25mm

80

80

80

80

Recommended Rope Size

13mm

13mm

15mm

18mm

Rope Storage Length – Standard Drum

80m

80m

59m

52m

Rope Storage Length – Extended Drum

165m

165m

119m

106m

Weight without Wire Rope – Std

104kg

104kg

104kg

104kg

Weight without Wire Rope – Ext

144kg

144kg

144kg

144kg

Supply Hose (Inside Ø) Sound Level (dB(A))

Tiger_AirWinch_War_DS180219

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Brake Hand Winch – BHW

Home of the Tiger hoisting and winching range Main Features: • The original brake hand winch • High quality multi-purpose winch • Automatic load-actuated brake can hold the load in any position • Compact, light-weight and rugged construction • Gears and brakes fully covered to prevent dust, dirt and rain contamination • Heavy Duty heat treated gears • Very low operator effort required for easy operation • Universal mounting plate • Available as 370kg, 550kg, 820kg and 1200kg models • Suitable for cable or strap

BHW

• Finished in high quality powder coat paint offering excellent corrosion protection • Available with OCP corrosion protection • Noiseless 1200lb model available • 3D Drawings available on full range for project planning • Operating temperature of -20°C to +80°C (temperature range of -40°C to +80°C available as an options)

BHW – Corrosion Protected

Tiger Brake Winch: The Tiger Brake Winch is a high quality multi-purpose winch used for a wide variety of lifting and hoisting applications. The automatic brake ensures the load remains suspended when the crank is released and avoids unchecked descent of the load; there is no freewheeling making the hand winch extremely safe to operate. All the mechanical components are enclosed for protection against dust, dirt and rain contamination. This equipment has a lifting capacity ranging from 800lbs to 2600lbs. The BHW is compact and lightweight yet rugged and durable. These units meet and exceed all the requirements within BS EN 13157: 2004+A1:2009.

Tiger_HandWinch_BHW_D042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Brake Hand Winch – BHW

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

Noiseless 1200lb Model: This model is equipped with a unique quiet brake design that is virtually silent and fully automatic. Best suited to those locations where quiet is required, such as schools, hospitals, caravans and theatres.

Corrosion Protection Option: This model is protected by our unique coating – OCP (Organic Compound Protection). The uniqueness of this coating gives unprecedented long term reliability and superior corrosion resistance and protection in the most severe conditions. The OCP coating provides excellent friction protection and has been proven to be effective through at least 1000 hours of the ASTM B 117 Salt Spray Test. The coating gives the properties of stainless steel without the cost implications.

Technical Data: Bullivants Mfr No.

WHW-NW-0370-BHW0800TG

Lifting Capacity First

Mid

Top

Layer

Layer

Layer

kg

kg

kg

370

254

180

Gear

Hub

Handle

Unit

Wire

Wire

Strap

Ratio

Dia

Length

Weight

Storage

Length

mm

kg

Dia ⌀ mm/

Cap.

m

inch

m

4

36

9.1

36

9.1

23

8.5

23

8.5

23

8.5

24

14.1

24

14.1

18

10.6

4.1:1

40

160

3.0

5/32

STANDARD BRAKE VERSION – NO WIRE WHW-NW-0370-BHW0800CRTG

370

254

180

4.1:1

40

160

3.0

WHW-NW-0550-BHW1200TG

550

392

275

4.1:1

50

210

3.5

550

392

275

4.1:1

50

210

3.5

550

392

275

4.1:1

50

210

3.5

820

562

400

5:1

70

320

8.0

820

562

400

5:1

70

320

8.0

1200

844

590

10:1

82

320

10.5

8 5/16

STANDARD BRAKE VERSION – NO WIRE

Tiger_HandWinch_BHW_D042019

6 ¼

(CORROSION RESISTANT) – NO WIRE WHW-NW-1200-BHW2600TG

6 ¼

STANDARD BRAKE VERSION – NO WIRE WHW-NW-BHW1800CRTG

5 3/16

(NOISELESS VERSION) – NO WIRE WHW-NW-0820-BHW1800TG

5 3/16

(CORROSION RESISTANT) – NO WIRE WHW-NW-0550-BHW1200NTG

5 3/16

STANDARD BRAKE VERSION – NO WIRE WHW-NW-0550-BHW1200CRTG

4 5/32

(CORROSION RESISTANT) - NO WIRE

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Brake Hand Winch – BHW

Technical Data for Winches Supplied with Wire Rope: Bullivants Mfr No.

WHW-WW-0370-BHW0800TGR

Lifting Capacity kg First

Mid

Top

Layer

Layer

Layer

370

254

180

Gear

Hub

Handle

Unit

Wire

Wire

Ratio

Dia

Length

Weight

Length

mm

kg

Dia ⌀ 4

30

4.1:1

40

160

3.0

5/32 550

392

275

4.1:1

50

210

3.5

820

562

400

5:1

70

320

8.0

20

6

22

¼

STANDARD BRAKE VERSION WITH WIRE WHW-WW-1200-BHW2600TGR

5 3/16

STANDARD BRAKE VERSION WITH WIRE WHW-WW-0820-BHW1800TGR

m

inch

STANDARD BRAKE VERSION WITH WIRE WHW-WW-0550-BHW1200TGR

mm/

1200

844

590

10:1

82

320

10.5

8

16

5/16

STANDARD BRAKE VERSION WITH WIRE

Winch Straps: (for pulling only) Width

Breaking

mm

Load

WHWP-RS-TG48

6 meters with safety hook

48

2968.5

BHW-0800 BHW-1200

WHWP-RS-TG54

9 meters with safety hook

54

2864.0

BHW-1800

WHWP-RS-TG60

9 meters with safety hook

60

4136

BHW-2600

Bullivants Mfr No.

Description

To Suit

kg

Tiger_HandWinch_BHW_D042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Brake Hand Winch â&#x20AC;&#x201C; BHW

Technical Drawings:

BHW-800

BHW-1200

BHW-1200-N

Tiger_HandWinch_BHW_D042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Brake Hand Winch â&#x20AC;&#x201C; BHW

BHW-1800

BHW-2600

Tiger_HandWinch_BHW_D042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Industrial Winch – SF-2200

Home of the Tiger hoisting and winching range Main Features: •

2200lb/1000kg Lifting & 4400lb/2000kg pulling capacity

Ratchet handle permits reciprocating handle movement in both directions for lifting and lowering loads

Positive load-actuated brake can hold the load in any position

Gears and brake are fully covered to prevent dust, dirt and rain contamination

Very low operator effort is required for easy operation

Ratchet handle accommodates installation in cramped locations

Certification: Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

Technical Data: Bullivants Mfr No.

Pulling

Lifting

Hand

Gear

Hub

Handle

Unit

Cable

Cable

Capacity

Capacity

Force

Ratio

Diameter

Length

Weight

Diameter

Storage

kg

kg

Required

⌀ mm

mm

with handle

⌀ mm/

Cap.

kg WHW-NW-1000-SF2200TG

2000

1000

10

22.2:1

80

300

kg

17.5

inch

m

8.0 5/16

45

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with you Bullivants Sales Representative when ordering.

Tiger_Winch_SF-2200_DS042019

1300 LIFTING

info@bullivants.com www.bullivants.com


Magnetic Lifter 100kg – 2 Tonne

Main Features: • Designed for use with ferrous metals • Suitable for use with cylindrical objects utilizing V-slot function • Easy to use operation • Non marring of materials • Unique serial number and comprehensive instruction manual supplied with each unit

ZERO HARM Product Features: • The NdFeB Permanent Magnet is not electromagnetic and requires no electricity – limiting the risk of accidents due to sudden power failures • Safety locking pin to prevent accidental release • Test certificate supplied with each unit • Designed and tested to comply with the requirements of AS4991

Specifications: Bullivants Mfr No.

WMAG-092-0100-BV

Rated Capacity

Length

Unit Weight

tonne

mm

kg

0.1

92

3.0

WMAG-166-0300-BV

0.3

166

12.0

WMAG-228-0600-BV

0.6

228

24.0

WMAG-266-1000-BV

1.0

266

43.0

WMAG-394-2000-BV

2.0

394

105.0

BV_MagneticLifter_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Magnetic Lifter 100kg â&#x20AC;&#x201C; 2 Tonne Dimensions: Bullivants Mfr No.

Lifting Capacity kg Flat Plate

Round

Dimensions mm

Max Pull

L

B

H

R

Off Force kg

Steel WMAG-092-0100-BV

100

50

92

64

72

148

350

WMAG-166-0300-BV

300

150

166

99

108

223

1050

WMAG-228-0600-BV

600

300

228

118

126

257

2100

WMAG-266-1000-BV

1000

500

266

150

158

303

3500

WMAG-394-2000-BV

2000

1000

394

196

204

470

7000

Technical Drawings:

BV_MagneticLifter_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Panther® Recovery Strop Panther® recovery strops are lightweight, high-strength, low-stretch recovery towing strops designed to be reliable and safe for your mining and vehicle recovery operations. The 12-strand high strength core is made of Dyneema® SK78 fibre, and is covered with 100% Dyneema® HMPE chafe protection to provide the appearance and ease of handling a single leg tow sling with superior abrasion resistance. At a fraction of the weight of wire, chain or Kevlar®, Panther® radically reduces manpower requirements and safety hazards.

Main Features: •

Dyneema® SK78 / Dyneema® (Core / Cover) fibre

Class II Core-Dependent Double Braid

Abrasion resistant and durable Dyneema® fibre jacket

Heavy duty and abrasion resistant DC Gard

100% UV stabilized with operating temperature range (-60 to 150°C)

Floats and remains visible on water surfaces – will not sink in muddy conditions (specific gravity 0.92)

Soft Eye allows greater flexibility and versatility

ZERO HARM Product Features: •

Low stretch (reduced recoil) minimising risk of injury

Lightweight for fast change out reducing the risk of potential manual handling injuries

Pink colour for high visibility

BV_PantherRecoveryStrop_DS042020

1300 LIFTING

info@bullivants.com www.bullivants.com


Panther® Recovery Strop Specifications: Bullivants Mfr No.

Average

Minimum

Overall

Unit

Max

Nominal Eye

Strength*

Strength*

Length

Weight

Diameter

Size

(MT)

(MT)

m

kg

mm

mm

WSU1-040-200-0006-EE-DS

20

18

0.69

0.4

40

150

WSU1-040-200-030-EE-DS

20

18

3.0

1.6

40

150

WSU1-040-200-060-EE-DS

20

18

6.0

2.9

40

150

WSU1-040-200-100-EE-DS

20

18

10.0

4.6

40

150

WSU1-047-300-016-EE-DS

30

27

1.6

1.4

47

150

WSU1-047-300-060-EE-DS

30

27

6.0

3.8

47

150

WSU1-047-300-100-EE-DS

30

27

10.0

6.1

47

150

WSU1-058-550-0005-EE-DS

55

49

0.5

1.2

58

150

WSU1-058-550-0008-EE-DS

55

49

0.8

1.4

58

150

WSU1-058-550-010-EE-DS

55

49

1.0

1.4

58

150

WSU1-058-550-017-EE-DC

55

49

1.7

2.1

58

150

WSU1-058-550-025-EE-DS

55

49

2.5

2.9

58

150

WSU1-058-550-030-EE-DS

55

49

3.0

3.3

58

150

WSU1-058-550-060-EE-DS

55

49

6.0

6.2

58

150

WSU1-058-550-100-EE-DS

55

49

10.0

10.0

58

150

WSU1-081-115-060-EE-DS

115

104

6.0

11.6

81

450

WSU1-081-115-100-EE-DS

115

104

10.0

18.6

81

450

WSU1-104-200-060-EE-DS

200

180

6.0

21.4

104

450

WSU1-104-200-010-EE-DS

200

180

10.0

33.5

104

450

WSU1-125-300-010-EE-DS

315

300

10.0

51.8

125

450

*Panther lengths/strengths listed in the table above are standard product offerings. Additional sizes available upon request. Other lengths may require additional lead time. Contact your sales representative for stock availability

BV_PantherRecoveryStrop_DS042020

1300 LIFTING

info@bullivants.com www.bullivants.com


AmSteel® Blue Soft Shackle Bullivants soft shackles are made from AmSteel® Blue 12-strand single braid rope. Provides maximum strength-to-weight ratio, and size-for-size strength against Grade S shackles. With a lightweight connection method and ease of use, this can replace steel shackles or other connection types for recovery and towing operations. Material will not corrode or rust and has short connection lengths.

Main Features: • Lightweight allows items to be handled without machinery • Less chafe damage on wear points • Will not corrode or rust • Superior flex fatigue and wear resistance • High strength-to-weight ratio (~70% lower than steel equivalent) • Floats and remains visible on water surfaces – will not sink in muddy conditions (specific gravity 0.92)

ZERO HARM Product Features: •

Low stretch (dissipates energy) minimising risk of injury

Lightweight for quick, easy attachment and detachment

Reduced risk of manual handling injuries

Rating Capacity and unique serial number identification markings for traceability

Minimum Shackle Length

Specifications: Bullivants Mfr No.

Rated Capacity

Minimum Shackle

Rope

Comparison

Steel Shackle

tonne

Length mm

Weight kg

WU1S-0140-014-ASB

14.0

240

0.59

Vs

5.93

WU1S-0350-022-ASB

35.0

380

1.8

Vs

18.85

WU1S-0700-036-ASB

70.0

720

6.15

Vs

29.1

BV_SoftShackle_DS092019

Weight kg

1300 LIFTING

info@bullivants.com www.bullivants.com


AmSteelÂŽ Blue Soft Shackle Safe Use Instruction Guide: NOTE: Ensure the knot is always at 90 degrees to the direction of the load as shown

Select the correct soft shackle and inspect the working load limit tags to ensure traceability

Slide the loose leg on soft eye until it opens wide enough to accept the knot end

Insert the knot end into the loop

Feed the knot end all the way through the loop end until clear. This forms the shackle.

Grasp the loose end of the shackle body with your left hand and milk / squeeze the outside of the soft shackle away from the knot end.

Continue to milk/squeeze the outside until the soft closes down around the base of the knot. May need to repeat the process until tight.

The soft shackle is now ready for use.

BV_SoftShackle_DS092019

1300 LIFTING

info@bullivants.com www.bullivants.com


Link-it® Soft Shackle Link-it button-knot is a soft shackle made from AmSteel® Blue, providing an easy to use, lightweight connection method. Replacing steel shackles or other

connection types, Link-It will not corrode or rust, and has short connection lengths.

Main Features: • Lightweight allows items to be handled without machinery • High strength • Superior flex fatigue and wear resistance

Single-Pass

• Shorter connection lengths • Will not corrode or rust • Less chafe damage on wear points • Floats and remains visible on water surfaces – will not sink

Two-Pass

in muddy conditions (specific gravity 0.98)

ZERO HARM Product Features: •

Low stretch (dissipates energy) minimising risk of injury

Lightweight for quick, easy attachment and detachment

Reduced risk of manual handling injuries

Rating Capacity and unique serial number identification markings for traceability

Specifications: Bullivants Mfr No.

Minimum

Overall Shackle

Loop

Unit

Minimum Bend Diameter*

Strength*

Length Closed

Count

Weight kg

mm

mt

m

WU1S-1740-022-ASB2L

174

0.5

2

2.4

55

WU1S-2160-024-ASB2L

216

0.6

2

3.2

60

WU1S-3590-034-ASB2L

359

0.8

2

8.3

85

WU1S-4070-060-ASB1L

407

1.4

1

34.8

150

WU1S-4220-042-ASB2L

422

0.9

2

16.0

105

WU1S-5540-048-ASB2L

554

1.1

2

23.2

120

*Strengths are based on minimum D/d ratio of 2.5 between the Bend Diameter and the Base Rope Nominal Diameter

BV_Link-it Soft Shackle_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Link-itÂŽ Soft Shackle Safe Use Instruction Guide:

Shackle Configuration Single-Pass

Set the bearing points close together, about 30cm less than the desired shackle overall length. Place the button knot between the two bearing points. Avoid placing the base of the tail on the bearing point if possible.

Thread the shackle eye end around the other bearing point.

Widen the shackle eye by pulling on the penetrating leg at the crossover point. Pull until the eye can fit over the bottom knot.

Place the eye over the knot and rest the knot close to the crossover point. Secure the eye by pulling the same body leg in the opposite direction. Tighten the eye by hand.

Finished single pass installation. As the shackle is loaded the legs will adjust and balance.

BV_Link-it Soft Shackle_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Link-itÂŽ Soft Shackle Shackle Configuration Two-Pass

Set the bearing points close together, about 30cm less than the desired shackle overall length. Place the button knot between the two bearing points. Avoid placing the base of the tail on the bearing point if possible.

Thread the shackle eye end around the other bearing point. For a 2-pass system, thread the shackle eye through the first and second bearing points again. Balance the length of each shackle leg as much as possible (when loaded, they will adjust even more so). Widen the shackle eye by pulling on the penetrating leg at the crossover point. Pull until the eye can fit over the bottom knot. Place the eye over the knot and rest the knot close to the crossover point. Secure the eye by pulling the same body leg in the opposite direction. Tighten the eye by hand.

Finished Two-pass installation. As the shackle is loaded the legs will adjust and balance.

BV_Link-it Soft Shackle_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Puller Winch 0.8 – 3.2 Tonne

Main Features: •

Supplied standard with 20m of wire rope

Easy to use operation

High precision action for fine positioning

ZERO HARM Product Features: •

High efficiency design to minimise manual effort

Unique serial number and test certificate with each unit

Comprehensive instruction manual supplied with each unit

Designed and tested to comply with the requirements of AS1418.2

Specifications: Bullivants Mfr No. WLW-WW-0800-BV

Pulling Capacity

Beam Range

tonne

mm

Unit Weight kg

0.8

20

12.6

WLW-WW-1600-BV

1.6

20

24.5

WLW-WW-3200-BV

3.2

20

44.0

BV_PullerWinch_DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Webbing Puller - WS

Home of the Tiger hoisting and winching range

Main Features • Capacities 1t and 1.5t • When clean and dry the web strap is non-conductive • Insulated handle • Handle rotates full 360° • Automatic brake with notch at a time operation • Up-Neutral-Down • Free wheeling • Lightweight and compact • Voltage Proof Test 15kV • 4:1 Factory of safety

Tiger_WebbingPuller_WS_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Tiger Webbing Puller - WS

Tiger Webbing Pullers are designed for use in hot line applications. They are lightweight and incorporate a webbing strap and lever handle. When clean and dry, the polyester webbing strap provides insulating properties. Along with the Fibre Reinforced Plastic (FRP) insulated handle this increases electrical safety when tensioning conductors and similar tasks. It also has a load holding function in both forward and reverse modes which are selected by a single click of the ratchet tab. The handle can rotate 360° to allow the most efficient use of the ratchet at any angle. Not to be used for lifting. Not to be used for supporting people. Each unit supplied with Manufacturerâ&#x20AC;&#x2122;s Instructions for Use.

Technical Data Product Code

WPU-WB-0150-T-WS1500

Tiger_WebbingPuller_WS_DS032020

Rated

Strap

Lever

Max Length

Min Length

Capacity

Size

Length

mm

mm

tonne

mm

mm

1.5

2.2 x 40

460

2000

420

1300 LIFTING

Weight kg

4.5

info@bullivants.com www.bullivants.com


Ratchet Tie-Down Tie-Down Restraints use friction to hold a load, which stops the load from moving forwards, sideways or backwards. To ensure reliability, durability and compliance, all webbing material and components are tested and marked with all requirements as specified by Australian Standards.

Main Features: Versatile load restraints for diverse applications â&#x20AC;˘

Suitable for use in the transport industry

â&#x20AC;˘

Complies with AS/NZS 4380:2001

Specifications: Lashing Bullivants Mfr No.

Capacity kg

Length m

Weight

Description

kg

WRA-025-0250-040-JH

250

4.0

J-Hooks each end

0.45

WRA-025-0250-040-SH

250

4.0

S-Hooks each end

0.45

WRA-025-0500-018-EL

500

1.8

Endless type

0.50

WRA-025-0500-040-EL

500

4.0

Endless type

0.50

WRA-050-0500-060-SH

500

6.0

S-Hooks each end

1.45

WRA-036-0600-016-SH

600

1.6

S-Hooks each end

0.50

WRA-036-0600-060-SH

600

6.0

S-Hooks each end

1.40

WRA-036-1000-060-HK

1000

6.0

Hook & Keeper each end

0.80

WRA-036-2000-022-EL

2000

2.2

Endless type

0.20

WRA-050-2000-090-JH

2000

9.0

J-Hooks each end

3.02

WRA-050-2500-090-HK

2500

9.0

Hook & Keeper each end

2.80

WRA-075-5000-090-HK

5000

9.0

Hook & Keeper each end

9.05

BV_Ratchet Tie-Down _DS022020

1300 LIFTING

info@bullivants.com www.bullivants.com


Ratchet Tie-Down Technical Data: To maintain the friction force during transportation the load must be tensioned correctly and always remain in contact with the vehicle. The tension applied to the load is impacted by the angle at which the lashing is applied. The greater the angle, the less the clamping force. The clamping force is very small when the lashing is near horizontal and more lashings may be required. For example, a single strap at 90 degrees is equivalent to four straps at 15 degrees. The type of surface the load sits on may also impact the tension – a slippery surface provides less friction; however, rubber or other friction surfaces can reduce.

TIE-DOWN ANGLE EFFECT APPROX.

TIE-DOWN

TIE-DOWN

ANGLE

ANGLE AFFECT

EFFECTIVENESS

90°

1.00

100%

60°

0.85

85%

45°

0.70

70%

30°

0.50

50%

15°

0.25

25%

Replacement Load Strap •

50mm wide replacement

2500kg lashing capacity

Lashing Bullivants Mfr No.

Capacity kg

WRLS-050-2500-090-HK

2500

Length m 9.0

Description Replacement strap for

Weight kg 1.6

2500kgs x 50mm ratchet assembly

WRLS-050-2500-090-HS

BV_Ratchet Tie-Down _DS022020

2500

9.0

Replacement strap for

1.5

truck winches

1300 LIFTING

info@bullivants.com www.bullivants.com


Truck Winch Main Features: •

Versatile load restraints for diverse applications

Suitable for use in the transport industry

Complies with AS/NZS 4380:2001

Slide-on Winch

Clip-on Winch

Specifications: Lashing Capacity

Length

kg

m

WTW-C-2500-90-HK

2500

9

Clip-on winch

8.2

WTW-S-2500-90-HK

2500

9

Slide-on winch

6.2

Bullivants Mfr No.

BV_Truck Winch_DS032020

Description

1300 LIFTING

Weight kg

info@bullivants.com www.bullivants.com


Modular Spreader Beams Bullivants Modular Spreader Beams are an ideal solution for general and specialised lifting applications. Bullivants’ range of Modular Spreader Beams extends from 2t capacity up to 400t capacity from stock and are available up to 1000t capacity on an indent basis. The Modular Design Each modular spreader beam consists of two end units, two drop links and a set of interchangeable struts to allow the length of the spreader beam to be changed to suit each application. For the shortest length, two end units can be bolted together directly.

Features & Benefits: Modular Design • Able to be assembled to custom lengths to suit various applications • Can be disassembled enabling ease of transportation to multiple sites • Individual components are easier to handle and store resulting in less storage space and lower handling costs • Economical as they are re-useable for multiple applications over many years • Engineered and approved design enables the beam to be cheaper in cost than a custom engineered, fabricated and tested spreader beam when used in accordance with the manufacturer’s instructions • Do not require load testing when assembled in accordance with manufacturer specifications • Stock available for immediate delivery reducing lead times and costs for external engineering, fabrication, painting and testing Lightweight • Engineered high strength design is lighter in weight than comparable spreader beams • Cranes can work closer to their capacity due to lighter weight rigging allowing them to lift a heavier load • Reduced transport costs Drop Links • Unique drop links contribute to the lightweight design and allows the load plane to be up to +/-6° from vertical when the beam length cannot be matched to the length of the load Certification • Bullivants modular beams have 3rd party design approval up to their maximum length (refer user instructions) and do not require retesting when disassembled and reassembled in different configurations up to the maximum length as specified by the manufacturer

ModularSpreaderBeam_DS032020

1300 LIFTING

info@bullivants.com www.bullivants.com


Modular Spreader Beams Kits Available • To help take some of the guesswork out of which products to choose when making your spreader beam selection, Bullivants have compiled a number of kits outlined below which are based on most common purchases and include shackles to create a ready to use system.

Large Shackle

Small Shackle

Strut

Drop Link

End Unit Sub-Assy

Modular 2 – QJ2 Kit

S1544002002

2x

End Units 0.2m 3t

2x

Drop Links 3t

1x

1.0m Strut

1x

0.6m Strut

1x

0.3m Strut

1x

0.2m Strut

1x

0.1m Strut

2x

4.75t Safety Bow Shackles

2x

3.25t Safety Bow Shackles

Includes locking pins for assembly

ModularSpreaderBeam_DS032020

Maximum length is 1.2m using all

Components not sold separately

components

1300 LIFTING

info@bullivants.com www.bullivants.com


Modular Spreader Beams Modular 6 S1544006006

End Units

S1544006007

Drop Links

Rated at 6 tonnes SWL at 3.6 metres span (60° ISA)

S1544006001

1.0m Strut

S1544006002

0.6m Strut

S1544006003

0.3m Strut

S1544006004

0.2m Strut

S1544006005

0.1m Strut

WSS-0047-SA-B-GP

4.75t Safety Bow Shackles

WSS-0032-SA-B-GP

3.25t Safety Bow Shackles

Maximum configuration length is 4.5m with a reduced working load limit

Included Sling’ angle, ø, 90 degrees or less

M10x30 bolts, nuts and washers for assembly

End Units & Drop Links are rated at 3t WLL each (6 tonnes combined capacity)

Bolt tightening torque: 60Nm

17mm spanner size required

Rated at 12 tonnes SWL at 4.75 metre

Modular 12 S1544012006

End Units

S1544012007

Drop Links

span (60°ISA) •

S1544012001

1.5m Strut

S1544012002

1.0m Strut

S1544012003

0.75m Strut

S1544012004

0.5m Strut

S1544012005

0.25m Strut

WSS-0085-SA-B-GP

8.5t Safety Bow Shackles

WSS-0065-SA-B-GP

6.5t Safety Bow Shackles

Maximum configuration length is 6.5m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or

End Units & Drop Links are rated at 6

less

M12x35 bolts, nuts and washers for assembly

tonnes WLL each (12 tonnes combined capacity) •

Bolt tightening torque: 90Nm

19mm spanner size required

Rated at 24 tonnes SWL at 5 metre span

Modular 24 S1544024004

End Units

S1544024005

Drop Links

(60°ISA) •

S1544024001

2.0m Strut

S1544024002

1.0m Strut

S1544024003

0.5m Strut

WSS-0170-SA-B-GP

17t Safety Bow Shackles

WSS-0120-SA-B-GP

12t Safety Bow Shackles

with a reduced working load limit •

‘Included Sling’ angle, ø, 90 degrees or less

End Units & Drop Links are rated at 12 tonnes WLL each (24 tonnes combined

M20x50 bolts, nuts and washers for assembly

ModularSpreaderBeam_DS032020

Maximum configuration length is 8.0m

capacity) •

Bolt tightening torque: 150Nm

30mm spanner size required

1300 LIFTING

info@bullivants.com www.bullivants.com


Modular Spreader Beams Modular 34 S1544034004

End Units

S1544034005

Drop Links

Rated at 34 tonnes SWL at 6 metre span (60°ISA)

S1544034001

2.0m Strut

S1544034002

1.0m Strut

S1544034003

0.5m Strut

S1544034007

0.25 Strut

WSS-0250-SA-B-GP

25t Safety Bow Shackles

WSS-0170-SA-B-GP

17t Safety Bow Shackles

Maximum configuration length is 10.0m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or less

M20x50 bolts, nuts and washers for assembly

End Units & Drop Links are rated at 17 tonnes WLL each (34 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

Rated at 50 tonnes SWL at 8 metre span

Modular 50 S1544050005

End Units

S1544050006

Drop Links

(60°ISA) •

S1544050001

4.0m Strut

S1544050002

2.0m Strut

S1544050003

1.0m Strut

S1544050004

0.5m Strut

WSS-0350-SA-B-GP

35t Safety Bow Shackles

WSS-0250-SA-B-GP

25t Safety Bow Shackles

Maximum configuration length is 13.0m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or less

M20x65 bolts, nuts and washers for assembly

End Units & Drop Links are rated at 25 tonnes WLL each (50 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

Rated at 70 tonnes SWL at 8 metre span

Modular 70 S1544050005

End Units

S1544070006

Drop Links

(60°ISA) •

S1544070001

4.0m Strut

S1544070002

2.0m Strut

S1544070003

1.0m Strut

S1544070004

0.5m Strut

WSS-0550-SA-B-GP

55t Safety Bow Shackles

WSS-0350-SA-B-GP

35t Safety Bow Shackles

‘Included Sling’ angle, ø, 90 degrees or less

M20x65 bolts, nuts and washers for assembly

ModularSpreaderBeam_DS032020

Maximum configuration length is 13.0m with a reduced working load limit

End Units & Drop Links are rated at 35 tonnes WLL each (70 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

1300 LIFTING

info@bullivants.com www.bullivants.com


Modular Spreader Beams Modular 70H (Heavy Duty) S1544070007

End Units

S1544070008

Drop Links

Rated at 100 tonnes SWL at 8.5 metres span (60°ISA)

S1544070001

4.0m Strut

S1544070002

2.0m Strut

S1544070003

1.0m Strut

S1544070004

0.5m Strut

WSS-0850-SA-B-GP

85t Safety Bow Shackles

WSS-0550-SA-B-GP

55t Safety Bow Shackles

Maximum configuration length is 14.0m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or less

M20x65 bolts, nuts and washers for assembly

End Units & Drop Links are rated at 50 tonnes WLL each (100 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

Rated at 110 tonnes SWL at 14 metres

Modular 110 S1544110005

End Units

S1544110006

Drop Links

S1544110001

4.0m Strut

S1544110002

2.0m Strut

S1544110003

1.0m Strut

S1544110004

0.5m Strut

WSS-0850-SA-B-GP

85t Safety Bow Shackles

WSS-0550-SA-B-GP

55t Safety Bow Shackles

span (60°ISA) •

Maximum configuration length is 18.0m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or less

M20x65 bolts, nuts and washers for assembly

End Units & Drop Links are rated at 55 tonnes WLL each (110 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

Rated at 170 tonnes SWL at 11.5 meters

Modular 110H (Heavy Duty) S1544110007

End Units

S1544110008

Drop Links

S1544110001

4.0m Strut

S1544110002

2.0m Strut

S1544110003

1.0m Strut

S1544110004

0.5m Strut

WSS-1200-SA-B-GP

120t Safety Bow Shackles

WSS-0850-SA-B-GP

85t Safety Bow Shackles

span (60°ISA) •

with a reduced working load limit •

‘Included Sling’ angle, ø, 90 degrees or less

M20x65 bolts, nuts and washers for assembly

ModularSpreaderBeam_DS032020

Maximum configuration length is 18.0m

End Units & Drop Links are rated at 85 tonnes WLL each (170 tonnes combined capacity)

Bolt tightening torque: 150Nm

30mm spanner size required

1300 LIFTING

info@bullivants.com www.bullivants.com


Modular Spreader Beams Modular 250 S1544250007

End Units

S1544250008

Drop Links

Rated at 250 tonnes SWL at 14 metres span (60°ISA)

S1544250001

6.0m Strut

S1544250002

4.0m Strut

S1544250003

3.0m Strut

S1544250004

2.0m Strut

S1544250005

1.0m Strut

S1544250006

0.5m Strut

WSS-2000-SS-B-GP

200t Safety Bow Shackles

WSS-1250-SS-B-GP

125t Safety Bow Shackles

Maximum configuration length is 21.0m with a reduced working load limit

‘Included Sling’ angle, ø, 90 degrees or less

End Units & Drop Links are rated at 125 tonnes WLL each (250 tonnes combined

M24x80 bolts, nuts and washers for assembly

capacity) •

Bolt tightening torque: 250Nm

36mm spanner size required

Rated at 400 tonnes SWL at 17 metres

Modular 400 S1544400006

End Units

S1544400007

Drop Links

S1544400001

6.0m Strut

S1544400002

4.0m Strut

S1544400003

3.0m Strut

S1544400004

2.0m Strut

S1544400005

1.0m Strut

WSS-3000-SS-B-GP

300t Safety Bow Shackles

WSS-2000-SS-B-GP

200t Safety Bow Shackles

span (60°ISA) • •

‘Included Sling’ angle, ø, 90 degrees or less

M24x90 bolts, nuts and washers for assembly

ModularSpreaderBeam_DS032020

Maximum configuration length is 24.0m with a reduced working load limit

End Units & Drop Links are rated at 200 tonnes WLL each (400 tonnes combined capacity)

Bolt tightening torque: 250Nm

36mm spanner size required

1300 LIFTING

info@bullivants.com www.bullivants.com

Profile for Bullivants

Bullivants Product Data Sheets  

Bullivants Product Data Sheets