Maintenance Tips That Tile Manufacturers Recommend

Maintenance Tips That Tile Manufacturers Recommend

Tiles are extremely durable surfacing material but over time, traffic and general use can cause them noticeable wear. However, tile manufacturers and industry experts believe that with proper cleaning and caring regime, both the appearance and value of tiles can be preserved. According to the National Association of

Home Builders, the average life expectancy of ceramic tile surfaces is between 75100 years while natural stone surfaces such as granite and marble can last more than 100 years. With adequate maintenance, it becomes easier to ensure that your new tiles remain as beautiful a few years down the road as they were the day they were laid down.

As a home or business owner, there are several ways to restore both indoor and outdoor tiles to their original, shiny condition. However, there are certain times when the job is better left to a professional. From cleaning hacks to preventing scratches and seeking professional help, here are a few tilemaintenance tips that tile manufacturers recommend to keep the tiled surfaces look as good as new for their entire life: Remove Excess Dirt Regularly This is the most basic yet effective method of maintenance for any tile surface.

From stains to serious scratches, the nature of domestic life can tarnish a pristine tiled surface. Although they require fewer efforts when it comes to general maintenance, owing to their easy-to-clean nature, regular upkeep is essential to keep the tiled surfaces free from dirt and debris. Sweeping and vacuuming regularly can help keep them gleaming for long. Heavy foot-traffic areas such as entryways, hallways, and exits require special attention as they are more prone to degeneration. Their life can be prolonged by laying mats and rugs.

Don’t Be Afraid To Deep Clean Depending on the type of tiles, the cleaning methods might vary. Although most of the tiles can be cleaned with a mild detergent mixed with hot water, it’s important to check the product instructions for specifics. Every tile supplier or manufacturer advices to use pH-neutral soap on the natural stone tile while vinegar and water solution will suit porcelain white floor tiles more. Deep cleaning tiles at least once a week helps keep tiles shiny and preserve their overall finish.

Repair or Replace Damaged Floor Tile Noticeable chips, cracks, and scratches can accumulate dirt, making an otherwise pristine surface appear shabby. While some damaged tiles can be filled with matching filler and their minor scratches can be buffed out, others may have to be completely removed and replaced..The repair mechanism of tiles varies depending on their type. It is also important to remove the old adhesive under the damaged tile to avoid slippage. Hence it is necessary to choose the right tile supplier/manufacturer while procuring tiles.

Tile and Grout Sealing One of the best ways to keep the tiles clean and well-maintained for years to come is to seal them using a high-quality sealer. Doing so will extend the life of the tiles, protect them from mold and minimize permanent damage and staining.

Since the protection capacity of each sealer is not the same, it’s better to turn to a professional to ensure that the tiles are adequately protected. It’s also important to have the old sealer replaced if the need be by a professional tile technician.

Sealer stripping is a complex and time-consuming task that requires specialized chemicals and specific equipment.

Get to Grips with Grout Sometimes it’s the grouts that diminish the gleam of surfaces. Be it ground-in dirt or food stains, working out a paste of baking soda and water into the grout will give a more defined appearance to the tiles with clean borders. With time, grout joints can also split, crack, crumble and wear off, leading to a range of issues including efflorescence, drummy tiles or leaky bathroom tiles. Instead of paying heavily in the future, the tile manufacturers recommend dealing with grout damage as soon as it begins to appear. Regrouting is the procedure they suggest that requires specific machinery and dust control equipment.

Maintaining the beauty of the tiles may not be that difficult. By keeping the above-mentioned tips in mind, their gleam can be enjoyed for a long period of time.

BuildSupply Address: Vatika Towers, Tower B, 15th Floor, Golf Course Road, Sector 54, Gurugram, Haryana, India 122002 Contact Number: 0124 470 9000 Email Id info@buildsupply.com Website https://buildsupply.com/ Twitter https://twitter.com/buildsupplynews