Page 1

Jan-10 hbgrip ds

Fitting of Brompton grips Brompton grips are designed to be used with an adhesive to produce a secure fit to the handlebar. Remove the old grips and ensure the handlebar is free from grease or oil. Run a bead of glue around the inside of the top of the grip as shown in fig HBG1. Slide the grip onto the bar, turning it a couple of times to ensure the glue is fully spread around the bar. The glue will take around 3 hours to grab in warm weather, longer if it is cold. We suggest leaving it overnight to ensure the bond is firm before riding the bike.

fig HBG1

Jan-10 hbgrip ds

Fitting of Brompton grips Brompton grips are designed to be used with an adhesive to produce a secure fit to the handlebar. Remove the old grips and ensure the handlebar is free from grease or oil. Run a bead of glue around the inside of the top of the grip as shown in fig HBG1. Slide the grip onto the bar, turning it a couple of times to ensure the glue is fully spread around the bar. The glue will take around 3 hours to grab in warm weather, longer if it is cold. We suggest leaving it overnight to ensure the bond is firm before riding the bike.

fig HBG1

/hbgrip_ds  

http://www.brompton.co.uk/extranet/downloads/Q_Parts_pdf/hbgrip_ds.pdf

Advertisement