Issuu on Google+

BELL SAFETY Safety in progress since 1950


HELMETS LAW ENFORCEMENT FIREFIGHTERS MILITARY parachuting

BELL SAFETY riot shield body protectioN mask military purpose


BELL SAFETY Safety in progress since 1950 DH18K4 DH18P6 DH17K7 DH138 M70009 fh410 MP1112 MP1013 m1014 M1215 SR10016 SR9018 SR18019 SG6020 SG6520 St6021 ST6521 Body protectionS

22

BPC24 BPK25 Groin protector

25

trt726 trt826 tr627 tfb27 military trolley

28


DH18K

LAW ENFORCEMENT HELMET

ANTI BALLISTIC KEVLAR FIBRE + PC / TWIN SHELL SYSTEM® - 3 MM VISOR • Kevlar ANTI Ballistic Fibre shell + Pc Fire resistant cover shell • 3 (5) mm visor Fragmentation resistance • v50>300 m/s Stanag 2920 niJ standard • 0104.02 norm (en397 - en136 Standards*)

Shell: Anti Ballistic Kevlar fibre (aramidic). Covered External Shell: Polycarbonate resistant to gasoline, scratches and fire retardant. Shock absorber shell: foam PS at different density.

Internal lining: removable airflow padding, good ventilation, fire retardant and sweat repellent fabric. Visor : 3 mm (5 mm) hard-coating abrasion resistant + fog resistant Lexan polycarbonate. Visor upper profile: fitted with rain insulating gasket. *Top gun visor: retractable between internal and external shell, removable, clear/smoke. Nape protector: removable, covered by fire retardant fabric. Gas mask attack: quick Release BellSafety 7000

100%

4

MADE

IN

I TA LY


STANDARDS: NIJ-0104.02 standard for antiriot helmets U.S. national Institute of Justice EN 13087 protection from crashes and blades-drills penetration VPAM-BSW 2004 protection from crashes and blades-drills penetration ECE 22.05 visor abrasion and fog resistance EN397 perforation resistance DIN-32763 chemical resistance

100%

MADE

IN

I TA LY

5


DH18P

LAW ENFORCEMENT HELMET

FIRE AND GASOLINE RESISTANT POLYCARBONATE SHELL EN 13087 - EN 397 - DIN 32763 - ECE 22.05 Standards

Shell: polycarbonate resistant to gasoline, fire retardant. Internal shell: foam PS at different density. Internal padding: removable airflow padding, good ventilation, fire retardant and sweat repellent fabric. Air ventilations*: 3 air vents granting a good internal air circulation. Visor : 3 mm (5 mm) Hard coating, abrasion resistant + fog resistant Lexan polycarbonate. Visor upper profile: fitted with rain insulating gasket.

Top gun visor*: retractable between internal and external shell, removable, clear/smoke. Nape protector : removable, covered by fire retardant fabric. Standards: EN 13087 protection from crashes and blades-drills penetration ECE 22.05 visor abrasion and fog resistance EN397 perforation resistance DIN-32763 chemical resistance *On demand

100%

6

MADE

IN

I TA LY


DH17K

LAW ENFORCEMENT HELMET

Kevlar anti BalListic Fibre Shell Fragmentation Anti Resistence V50>300 m/s Stanag 2920 NIJ - 0104.02 Standard - (EN397 - EN136 Standard*)

Shell: Anti Ballistic Kevlar fibre (aramidic). Shock absorber shell: foam PS at different density. Internal padding: removable airflow padding, very good ventilation fire retardant and sweat repellent fabric. Visor: 3 mm (5 mm)* hard coating, abrasion and fog resistant Lexan polycarbonate. Visor upper profile: fitted with rain insulating gasket. Nape protector: removable, covered by fire retardant fabric.

100%

MADE

IN

Standards: NIJ-0104.02 standard for antiriot helmets U.S. national Institute of Justice EN 13087 protection from crashes and blades-drills penetration VPAM-BSW 2004 protection from crashes and blades-drills penetration ECE 22.05 visor abrasion and fog resistance EN397 perforation resistance DIN-32763 chemical resistance

I TA LY

7


DH13

LAW ENFORCEMENT HELMET

EN 13087 - Standard - Polycarbonate copolymer-shell 3 mm antiscratch visor.

Shell: PC copolymer with air ventilations. Internal shell: shock resistant foam PS. Air ventilations: 3+2 air vents ensuring a good internal air circulation. Internal lining: hypoallergenic and sweat repellent.

Visor : 3 mm Lexan antiscratch. Nape protector: fixed, polyethylene with fireproof covering. Sizes: XXS (52), XS (54), S (56), M (58), L (60), XL (62), XXL (63). NORM: NIJ-0104.02 standard for antiriot helmets U.S. national Institute of Justice EN 13087 protection from crashes and blades, points/drills penetration ECE 22.05 visor abrasion and fog resistance DIN-32763 chemical resistance

100%

8

MADE

IN

I TA LY


M7000

MASK

BELL SAFETY

EN 136 - Full face respirator, Abrasion Resistant / Nofog lens Mask fit to be used in quick movement and running. The panoramic vision (down- and sideswords) ensures a wider vision even while running, increasing notably the agent safety, the M7000 is in accordance with the Standard EN 136:1998 CL2 equipped with threaded connection complying with the EN 148-1 Standard.

Structure: silicone keeps elasticity even at low temperatures, ageing resistant. Visor: polycarbonate Lexan 2,2 mm high shock and perforation resistance, antiscratch and antifog coating. Hook: quick and adjustable to the helmet DH18 and to other helmets on demand.

STANDARDS: EN 136:1998 CL2 EN 148-1 Threaded connection CE DIN-32763 Chemical resistance

100%

MADE

IN

I TA LY

9


FH4

FIREFIGTHING HELMET

PROTECTIVE HELMET FOR FIREFIGHTERS CERTIFIED IN ACCORDANCE WITH UNI EN 443: 2008 Certifications in accordance with the new european standard uni en 443:2008 Bell FH4 helmets comply with Directive 89/686/CEE and EN 433:2008 Standard; certificate CE n 463-665-676

Certifications certificate in accordance with Uni en 443:2008 Standard low temperature -20°C resistance to radiant heat 14 kW/m2 dielectric test on wet helmet (e2) surface insulation test (e3) The two visors are certified in accordance with the standard regulations Uni En 14458:2005 Metallic face screen FEATURES abrasion resistance antifog resistance impact resistance protection against high speed particles class A flame resistance radiant heat resistance resistance to melted metals and hot solids protection from infrared effects working temperatures: -40°C + 120°C class B

OCULAR VISOR FEATURES abrasion resistance antifog resistance impact resistance protection against high speed particles class A (high energy impact) flame resistance radiant heat resistance resistance to melted metals and hot solids working temperatures: -40°C + 120°C class B (medium energy impact)

100%

10

MADE

IN

I TA LY


External shell: made of composite Kevlar fibres. Internal shell: made of PUR it has the function to absorb the impact. It ensures a very good head thermal insulation and contributes to increase the electrical insulation. Sizes regulation: the helmet has an adjustable size, the sizes regulation system allows a quick regulation from size 52 to size 64. SCREEN AND VISOR The Bell FH4 helmets are equipped with a protective screen certified in accordance with EN 14458:2006 and/or EN 166:2004 Standards. Reflecting face screen: the face screen is made of fireproof polycarbonate with anti abrasion treatment. The screen is gold metallized on the outer part in order to reflect heat and allowing the operator getting closer to the flame. Internal ocular visor: eyes protection visor to be used when the face screen is up. Made of heat resistant Polycarbonate, antiscratch outside and antifog inside. Internal ocular visor regulation system: a n exclusive system allows the regulation of the internal visor in order to match the operator’s face. This allows a correct positioning of the visor ensuring higher comfort and safety. ACCESSORIES The Bell FH4 helmets can be equipped with: Nape protector made of aramidic fabric: neck and shoulders protection certified according to EN 443:2008 Refractive bands Lamp holder

100%

MADE

IN

I TA LY

11


MP11

PARASCHUTING HELMET

HELMET FOR PARATROOPERS AND AIR SPORTS IN ACCORDANCE WITH EN 966 STANDARD

External shell: carbon fibre, the best resistance and lightness. Internal padding: expanded Pe it does not absorb water, washable, floating, very good head thermal insulation. Pockets for altimeters: suitable space behind the ears to place altimeters and small lighting cells. Retention system: adjustable system fitted with fast hook and release system. Removable nape protector: it ensures a very good stability and protects the neck. A zip makes it easy to remove. Lighting signal: waterproof led placed on the shell top. It is powered by a waterproof battery placed into the pocket behind the ears.

100%

12

MADE

IN

I TA LY


MP10

PARASCHUTING HELMET

HELMET FOR AIR SPORTS IN ACCORDANCE WITH EN 966 STANDARD

External shell: resyn RT. Internal shell: expanded PS. Internal lining: fireproof, washable breathable fabric. Retention system: adjustable system fitted with fast hook and release system. Visor: Optional, fixed to the helmet with buttons.

100%

MADE

IN

I TA LY

13


M10

MOTORCYCLE POLICE HELMET

Modular helmet for police Twin Shell System® EU approval ECE 22.05 Modular helmet realized with twin Shell System: two shells, the external one made of resyn, the internal one made of carbon fibre. The chin rest can be easily opened with one hand: the top in safety.

Shell: realized with a twin shell system: the external one made of resyn is long lasting, shock and scratch resistant; the internal one is made of carbon fibre to grant the maximum safety in the event of an accident (shock) by absorbing the kinetic energy. Inner shell: shock resistant foam PS at different density to grant higher protection in the event of shocks. Visor: made of Pc Lexan with optical properties, antiscratch coating and uv filter. Air vents: realized in order to grant a higher inner comfort at high temperature and avoid noises. Chin rest connection: granted on the two lateral points with a single button opening system located in the chin rest itself. Internal lining: made of sweat repellent hypoallergenic Drytex fabric. Multilayer painting: long lasting paints, colors on request. Interphone or Bluetooth system on demand. Weight 1650 gr Helmet - approval ECE 22.05 E3 N° 052599/P VISOR approval N° 052614

100%

14

MADE

IN

I TA LY


M12

MOTORCYCLE POLICE HELMET

Prodotto

CODICE

Carbon Composite Fibre helmet for police EU approval ECE 22.05 Helmet in carbon fibre and composite materials for highest safety, fit for Bluetooth Systems.

Shell: carbon fibre and composite materials. Internal lining: sweat resistant hypoallergenic fabric. Retention system: adjustable system fitted with fast hook and release system. Weight: 1150 gr approval ECE 22.05 E3

100%

MADE

IN

I TA LY

15


SR100

RECTANGULAR SHIELD

BELL SAFETY

Rectangular SHIELD 600 MM x 1000 mm thick. 4 mm

Size: W 600 mm H 1000 mm. Medium thickness 4 mm Weight: 3980 gr Material: Gasoline resistant Polycarbonate with anti ageing u.v. filter Resistant to gasoline and hydrocarbons in general Fire resistant more than 10 seconds at flame (UL94 Norm) SR100 is available in 3 different versions: T - E - M

100%

16

MADE

IN

I TA LY


BELL SAFETY

TYPE OF HANDLES ELASTIC HANDLE With elastic release, in case of high traction the operator’s arm is quickly released. Two elastic semi-shells fixed in such a way to optimize arm position to reduce fatigue. The ergonomic profile prevents accidental release. OP HANDLE Practical and easy to use, it allows the operator to grab and position the shield quickly with one hand, no need of buckles or regulations. The arm is not fixed to the shield, in an emergency no danger of injuries while releasing the shield. The thermoplastic resyn structure is resistant and light, the rubbers covering is anti-slip, no metallic parts. The arm padding is made of thermoplastic foam, it doesn’t absorb water and damps the shocks. The handle is available for both right and left handed.

100%

MADE

IN

I TA LY

17


SR90

BELL SAFETY

RECTANGULAR SHIELD

Rectangular SHIELD 520 MM x 920 MM THICK. 3 MM

TYPE OF HANDLES

Size: W 520 mm H 920 mm. Medium thickness 3 mm Weight: 2950 gr Material: Gasoline resistant Polycarbonate with anti ageing u.v. filter. Resistant to gasoline and hydrocarbons in general. Fire resistant more than 10 seconds at flame (UL94 Norm). Rounded external edges.

ELASTIC HANDLE With elastic release, in case of high traction the operator’s arm is quickly released. Two elastic semi-shells fixed in such a way to optimize arm position to reduce fatigue. The ergonomic profile prevents accidental release. OP HANDLE Practical and easy to use, it allows the operator to grab and position the shield quickly with one hand, no need of buckles or regulations. The arm is not fixed to the shield, in an emergency no danger of injuries while releasing the shield. The thermoplastic resyn structure is resistant and light, the rubbers covering is anti-slip, no metallic parts. The arm padding is made of thermoplastic foam, it doesn’t absorb water and damps the shocks. The handle is available for both right and left handed.

100%

18

MADE

IN

I TA LY


SR180

BELL SAFETY

RECTANGULAR SHIELD

Rectangular SHIELD 600 mm x 1800 mm thick. 3/4 mm

TYPE OF HANDLES Dimension: W 600 mm H 1800 mm. Medium thickness 3/4 mm Weight: 6500 gr Material: Gasoline resistant Polycarbonate with anti ageing u.v. filter. Resistant to gasoline and hydrocarbons in general. Fire resistant more than 10 seconds at flame (UL94 Norm). Rounded external edges.

100%

MADE

IN

OP HANDLE Practical and easy to use, it allows the operator to grab and position the shield quickly with one hand, no need of buckles or regulations. The arm is not fixed to the shield, in an emergency no danger of injuries while releasing the shield. The thermoplastic resyn structure is resistant and light, the rubberscovering is anti-slip, no metallic parts. The arm padding is made of thermoplastic foam, it doesn’t absorb water and damps the shocks. The handle is available both right and left handed.

I TA LY

19


SG60

SG65

diameter 600 MM

diametEr 650 MM

Shield rotating on its own axe, the external part turns while the forearm area remains fixed.

Shield rotating on its own axe, the external part turns while the forearm area remains fixed.

ROTATING SHIELD

BELL SAFETY

ROTATING SHIELD

SG 60 / SG 65 Sizes: diameter 600 / 650 mm, thickness 3 mm Weight: 2500 / 2650 gr Material: gasoline resistant polycarbonate, with anti ageing u.v filter, rounded shield borders. Anti abrasion treatment. Resistant to gasoline and hydrocarbons in general. Fire resistant more than 10 seconds at flame (UL94 Norm).

TYPE OF HANDLES ELASTIC HANDLE SR Handle with elastic release: it is elastic in the forearm part in order to allow an automatic release of the agent’s arm in case of traction by an antagonist. After the release the structure turns back and it can be quickly used again. The bumper made of elastic material helps absorbing external shocks. The arm’s support padding, made of thermoplastic foam, doesn’t absorb water and damps the shocks. Handle available for both right and left handed. Optional: Batton holder.

100%

20

MADE

IN

I TA LY


ST60

ST65

Diameter 6o0 mm

Diameter 650 mm

Ultra light 1,5 Kg practical and resistant shield.

Practical and resistant shield.

ST 60

ST 65

Dimension: diameter 600 mm, thickness 3 mm Weight: 1550 gr Material: polycarbonate resistant to gasoline, with anti ageing u.v filter, rounded shield borders. Anti abrasion treatment. Resistant to gasoline and hydrocarbons in general. Fire resistant more than 10 seconds at flame (UL94 Norm).

Dimension: diameter 650 mm, thickness 3 mm Weight: 2650 gr Material: polycarbonate resistant to gasoline, with anti ageing u.v filter, rounded shield borders. Resistant to gasoline and hydrocarbons in general. Fire resistant more than 10 seconds at flame (UL94 Norm).

ROUND SHIELD

BELL SAFETY

ROUND SHIELD

WEARABLE HANDLES ELASTIC HANDLE SR Handle with elastic release: it is elastic in the forearm part in order to allow an automatic release of the agent’s arm in case of traction by an antagonist. After the release the structure turns back and it can be quickly used again. The bumper made of elastic material helps absorbing external shocks. Handle available for both right and left handed.

100%

MADE

IN

I TA LY

21


BODY PROTECTIONS

BELL SAFETY

RESISTANT TO PERFORATION AND CUT ANTIBALLISTIC KEVLAR INSERT PRODUCED ON CUSTOMER’S SPECIFICATIONS

100%

22

MADE

IN

I TA LY


BELL SAFETY

100%

MADE

IN

I TA LY

23


BPC

LIMBS PROTECTIONS

BELL SAFETY

POLYCARBONATE Knees shells protections are made of Polycarbonate.

BPC2: Polycarbonate legs protections. Kevlar+carbon fibre knees. BPC3: Polycarbonate arms protections. The BPC protections, even if cheaper than those in carbon and Kevlar fibre, have a good shock resistance and ensure a high safety level. FEATURES Fire resistance: v.2. in accordance to UL 94 Norm. Hygroscopicity: it doesn’t absorb any liquid. Temperature resistance: -40°C + 60°C. Resistance to knife/blade perforation VPAM - KDIW 2004 Standard (Vereinigung der Prüfstellen für angriffshemmende Materialien und Konstruktionen) Deutsche Hochschule der Polizei

100%

24

MADE

IN

I TA LY


BPK

LIMBS PROTECTIONS

GROIN PROTECTOR BODY PROTECTION

KEVLAR FIBRE + CARBON Ultra light, shock resistant. Rigid, fire resistant, anti penetration. BPK2 KEVLAR: legs and knees protections BPK3 KEVLAR: arms protections

Realized with two different shells.

External protection shell: antiballistic Kevlar fibre and an external layer of carbon fibre granting a very high rigidity and resistance to ageing. The internal shock absorption pad is of fireproof expanded foam covered by NomeX structure. The protection does not absorb any liquid including flammable liquids. It can be washed simply with water and common house detergent. A steel cable passing under the shoe fixes the protection for long lasting use. FEATURES resistance to knife/blade perforation. vPam - KdiW 2004 Standard. (Vereinigung der Pr端fstellen f端r angriffshemmende Materialien und Konstruktionen) Deutsche Hochschule der Polizei. Impact angle 90 / 25 degrees. Maximum perforation depth 20 mm. SIZES 1.M (size medium height 168 - 177 cm) 2.L (size large height 178 - 186 cm) 3.XL (size extra large 187 - 196 cm)

External: plastic material with high impact strength Internal: hard and protective core for the most sensible area. Hard protective internal shell made of hypoallergenic and washable nylon covered by soft rubber that allows any movement. Shock resistant. Easy to wear thanks to the adjustable elastic straps.

100%

MADE

IN

I TA LY

25


TRT7

TONFA

TRT8

TONFA

BELL SAFETY

TELESCOPIC TONFA INOX RUBBER FINISHING

TELESCOPIC TONFA ALUMINIUM RUBBER FINISHING

The telescopic Bell Safety tonfa is made of a inox steel core covered by soft rubber. Even maintaining its hardness, the rubber finishing limits injuries.

The telescopic Bell Safety T-baton is made of an aluminium core covered by medium soft rubber.

STRUCTURE Made of long lasting inox steel, it can be used also in high demanding environments such as marine water or in presence of high humidity. Internal telescopic baton made of nylon + glass fibre, very tough and elastic. Covering of all the metallic area made of medium soft anti sliding rubber. No metallic part is visible. External anti sliding treatment of the rubber allows a good handling both opened or closed, avoiding slipping also in condition of sweaty hands.

STRUCTURE Made of long lasting aluminium. Internal telescopic baton made of nylon + glass fibre, very tough and elastic. Covering of all the metallic area made of medium soft anti sliding rubber. No metallic part is visible. External anti sliding treatment of the rubber allows a good handling both opened or closed, avoiding slipping also in condition of sweaty hands.

100%

26

MADE

IN

I TA LY


TR6

BATON

TFB

TONFA

BELL SAFETY

Telescopic Baton rubber finishing

Tonfa made of glass carbon fiber Ultralight, well-balanced

The telescopic Bell Safety batton is made of a inox steel core covered by medium soft rubber.

The Bell Safety TONFAIBER is made of a special polymer modified with glass carbon fibre which grants high performances.

STRUCTURE Made of long lasting inox steel, it can be used also in high demanding environments such as marine water or in presence of high humidity. Internal telescopic baton made of nylon + glass fibre, very tough and elastic. Covering of all the metallic area made of medium soft anti sliding rubber. No metallic part is visible. External anti sliding treatment of the rubber allows a good handling both opened or closed, avoiding slipping also in condition of sweaty hands.

100%

MADE

IN

I TA LY

27


MILITARY TROLLEY

BELL SAFETY

Trolley suitcase for military and professional use with high shock resistance. Equipped with wheels and handles for pulling sideways. It is equipped with a further side handle for transportation. Stackable, lockable with two hooks.

Sizes ext: 800 mm x 420 mm H 350 mm Volume: 90 lt Weight: 6300 gr Material: PP

100%

28

MADE

IN

I TA LY


BELL SAFETY Safety in progress since 1950

29


Production dept SHIELDS PRODUCTION

HELMETS PRODUCTION

VISORS PRODUCTION

30


Composite fibRE

Laboratory

31


OUR COMPANIES BELL SAFETY Italy Omnia Plastica Italy Plastici Industriali Italy MotoSport Italy Compositi Industriali Italy Plastim England Industrial Plastics Europe Netherlands Vista Indonesia PLASTEm South Africa

BELL SAFETY Safety in progress since 1950 Bell Safety s.r.l. - Cinisello Balsamo (Milano) Tel. +39.0331.340153 Fax +39.0331.350076 www.bell-safety.com - info@bell-safety.com


Bell Safety Catalog 2013