Page 1

CRACKED MORTAR WATER DAMAGED MORTAR

Tuckpointing is a decorative finish providing a sharp and symmetrical outline to a wall face. Historically a means to improve the look of poor quality bricks or stone. An even more impressive finish on walls of high quality materials and workmanship. The tuckpoint lines being very light (usually white) in colour separate the different darker coloured bricks/mortar.

HOW IT WORKS Carefully remove existing worn mortar to 15-20mm from the brick face usually with a grinder and dust vacuum, cleaning the joint out with compressed air and or water.

Colour match and mix replacement mortar injected directly into the joint thru a caulking gun. A proprietary acrylic chemical when added to water in the mix allows the mortar to flow without smearing the brick or stone face, ie no messy pushing off a trowel.

The mortar is tooled flat almost flush and not more than 1mm above the brick or stone face filling damaged and or irregular edges providing a flat surface as done by the original tuck pointer.

Lightly draw the positions of the tuckpoint vertical and horizontal lines as they were originally placed, sometimes on the brick or stone face to retain the pattern.

TECHNICAL EXCELLENCE A 20 year warranty on correctly tooled finish to the mortar surface providing there are no structural deficiencies or rising damp. Mortar mix compliance with Australian Standards and or specific client requirements.

Infographic prodvied by:

www.brickworkrestoration.com.au


What is tuckpointing?  

Tuckpointing is a decorative finish providing a sharp and symmetrical mortar outline to repair brickwork. This infographic explains "What is...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you