__MAIN_TEXT__

Page 1

Bosch Commercial Controls Control Air 5830

The Bosch Control Air 5830 provides precision and intelligent alteration of system components for your energy efficient heat pump.

www.BoschHeatingAndCooling.com


Powerful System Control & Communication Bosch Control Air 5830 The Bosch Control Air 5830 Digital Direct Controller (DDC) delivers powerful control and communications features all in a compact, economical package. Highly flexible, yet easy-to-use programming tools allow customization for a wide variety of small and large equipment applications. Fully capable of operating in a 100% stand-alone control mode, the Control Air 5830 can connect to a Building Automation System (BAS) using any of today’s most popular protocols, such as BACnet, Modbus, N2, and LonWorks. The Control Air 5830 also supports communication to Bosch's line of intelligent ZS Series zone sensors and Control Air M/M+ (HMI's).

Features u

I/O point count: 5 digital outputs (relayed), 8 inputs (6 universal inputs and 2 optional adjustment POTS), plus 3 analog outputs

Built-in protocol support: BACnet (ARC156 and MS/TP), Modbus, and N2. Protocols and baud rates are DIP switch selectable

u

LonWorks optional plug-in communications boards

u

On-board battery-backed real-time clock is standard, thus enabling full stand-alone scheduling capabilities, as well as historical trend data storage, and alarm event time-stamping

u

u

u

Powerful, high-speed 16-bit processor with 1MB Flash memory and 512 KB of battery-backed RAM - plenty of room for even demanding and complex applications. Software modifications or upgrades can be downloaded locally or remotely - no chip replacements necessary Local Android Tablet access ports provided on both the Control Air 5830 and the intelligent ZS Series Zone Sensors, which enable full diagnostic and configuration capabilities


Bosch Control Air 5830 Application Now, even on small applications, you can have customized control sequences and with built in multi-protocol support, simplified integration into the BAS (Building Automation System), while staying competitive from a cost standpoint.

Rnet

Control Air M

Bosch MC Control Air 5830

Communication Ports 8

2

4

2

5 8

5

3

2

Potentiometer Thermistor or Dry

24V, 1Amp

Technical Specifications Power Physical Dimensions Operating Range

1

0-10 Vdc, 5mA

0-5V, Thermistor or Dry

Water-to-air Part Number

1

Local Access Sensor Network RS 485

Bosch Control Air 5830 8733955119 (SW: WAZ.1.02) 24 Vac ± 10%, 50-60 Hz, 18 VA power consumption, 26 Vdc (25 V min, 30 V max), Single Class 2 source only, 100 VA or less Rugged GE C2950 Cycoloy plastic Length: 5-1/16"

Height: 5-11/16"

Width: 1-3/4"

0° to 130°F (-18.5° to 54.4°C); 10 to 90% relative humidity, non-condensing

Digital Outputs

5 digital outputs, relay contacts rated at 1 A resistive @ 24 Vac, configured as dry contact, normally open

Analog Outputs

3 analog outputs, rated as 0-10Vdc, 5mA (max). 8 bit D/A resolution

Universal Inputs

Communication Ports

8 universal inputs. Inputs 1-6 configurable as thermistor or dry contact; inputs 1 and 2 also configurable as 0-5 Vdc type inputs; inputs 7 and 8 are reserved to use with 1k-10 koHm adjustment potentiometers. Resolution of 10 bit A/D. Port 1: Jumper configurable for ARCNET or EIA-485 communication. In ARCNET mode, the port speaks BACnet (at 156k bps). In EIA-485 mode, the communication protocol and baud rate desired are DIP switch selectable between BACnet MS/TP, Modbus RTU, or N2. Rnet port: Interface with a Control Air M/M+, ZS sensors, or Android Tablet

Optional Card Port

LonWorks Option Card for connection to Free Topology LON networks (TP/FT-10 Channel)

Status Indication

Visual (LED) status of serial communication, running, errors, power, and all digital outputs

Battery Protection

Listed By

Battery CR123A has a life of 10 years with 720 hours of cumulative power outage Built-in surge transient protection circuitry. Module protected by internal solid state Polyswitches on incoming power and network connections. Polyswitches do not need to be replaced as they will reset themselves once the condition that caused them to “trip” returns to normal. FCC Part 15 - Subpart B - Class A. Pending listings at the time of publishing this document: UL 916 (PAZX), cUL C22.2 No. 205-M1983 (PAZX7), CE (1997). BTL (BACnet Test Labs) - BACnet Advanced Application Controller (B-AAC) http://www.bacnetinternational.net/btl/index.php?m=47


About Bosch Bosch Group The Bosch Group is a leading global supplier of technology and services in the areas of Automotive, Industrial Technology, Consumer Goods and Building Technology. The company was founded in Stuttgart, Germany, in 1886 and presently has more than 440 subsidiaries and is represented in over 150 countries. In the U.S., Canada and Mexico, the Bosch Group manufactures and markets automotive original equipment and aftermarket solutions, industrial drives and control technology, power tools, security and communication systems, packaging technology, thermotechnology, household appliances and software solutions. The Bosch Group’s products and services are designed to improving quality of life by providing innovative and beneficial solutions. In this way, the company offers technology worldwide that is “Invented for life.” Additional information is available online at boschheatingandcooling.com and bosch.ca.

Bosch Thermotechnology in North America Bosch Thermotechnology is a leading source of high quality water heating and comfort systems. The company offers gas tankless, electric whole house and point-of-use water heaters, Bosch and Buderus floor-standing and wall mounted boilers, Bosch and FHP geothermal, water-source and air-source systems as well as controls and accessories for all product lines. Bosch Thermotechnology is committed to being Simply Smart by offering products that work together as integrated systems that enhance quality of life in an ultra-efficient and environmentally friendly manner. For more information, visit boschheatingandcooling.com.

Bosch Water-Source Heat Pumps: Made in the U.S.A. Bosch and FHP water-source and geothermal heat pumps are made by highly trained and skilled workers in our factory based in Fort Lauderdale, Florida. They are manufactured with rigorous standards and factory testing ensuring high efficient operation over the life of the unit. Bosch’s ISO 9001 and ISO 14001 certified facilities provide consistent quality in every unit built.

Bosch Thermotechnology Corp. Watertown, MA • Londonderry, NH • Ft. Lauderdale, FL General Inquiries: 1-866-642-3198

Heating

Cooling

Hot Water

Controls

www.BoschHeatingAndCooling.com

Copyright © 2020 Bosch Thermotechnology Corp. All rights reserved. Subject to change without notice. 74H992845C

6-20

Profile for Bosch HVAC

Bosch Control Air 5830  

Bosch Control Air 5830