BONNELL V-BOX TAILGATE LATCH KIT (BV-1325)
STEP 1. DETERMINE TAILGATE PIN SIZE: Kit includes both 1” and 1-1/4” pins x 9” long. Choose appropriate size, and weld washer heads on as shown at left. 1” washers are included in kit.
STEP 2. FABRICATE ANGLE: Cut angle to proper length. Angle should be as long as possible, without interfering with the latch mechanisms on the body. Weld pins in corners of angles as shown at left. To determine overall length, allow approximately ½” between washer face and latch face. WELD PINS ON ALL SIDES.
STEP 3. INSTALL ANGLE: Install angle onto body. Verify proper fit, and that there is no interference.
2