Page 1

The Elite Source of Sustainability

INCH

6

INCH

5

INCH

4

WWW.IUSEELITELED.COM

MAXILUME A R C H I T E C T U R A L L I G H T I N G W W W. M A X I L U M E . C O M


Elite LED lighting is the Elite Source of Sustainability

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


We, as human beings, fight darkness. We spend millions fighting it. We need light. Our energy consumption proves it and is ever increasing as we attempt to resist the impending darkness. We started with fires in caves then over time moved to oil burning lamps, and then to using incandescent filament lamps. Solid-state lighting is well on our horizon, the promise of lighting that is efficient and green is a reality; not just a wishful promise. You hold here in your hands the full line Elite LED Solution catalog. We have products that cover cove lighting, step lighting, under cabinet lighting and most importantly, down lighting.

all products are u.s. and foreign patent pending


Technological Lighting Revolution • Sustainability – maintenance-free, zero PCBs, zero mercury, zero lead, near zero infrared, zero ultra violet • Performance – limited three-year warranty • Quality – engineered to exceed quality expectations. • Comfortable light – warm 27K, 30K, 35K, 41K and 50K 80 plus CRI, dimmable down to 5% (see dimming control section) • Efficacy – up to 57 lumens per watt • Lumens delivered – more than 1120 lumens • Power consumed – from 6 watt up to 21 watt • Use in – existing ceilings, retrofit applications, remodel construction • Less energy – up to 75% less than an incandescent 65w BR30 and up to 35% less than a 32w cfl

The Light Emitting Diode (LED), also referred to as Solid State Lighting (SSL), was invented in Russia in the 1920s. Oleg Vladimirovich Losev published his research in 1927 in a Russian journal. LED technology was first brought to the United States in 1962. Early LEDs were low intensity and red in color. Today, Elite Lighting’s LEDs cover the visible spectrum from 2,700 degrees Kelvin to 5,000 degrees Kelvin and from 450 nm to 750 nm. An LED is based on the same technology as the semiconductor diode. When an electrical current passes through the unique materials in an LED, there is a recombination of positive and negative charges, resulting in the emission of photons, or light energy. Social environmental awareness and legislative regulations are requiring lighting industries to develop energy-efficient lighting solutions. Elite LED luminaires are the green eco-friendly and high-efficiency alternatives to today’s less efficient designed sources and luminaires. All 4-inch, 5-inch, 6-inch and 8-inch aperture Elite Lighting LED luminaire devices qualify for the Energy Star Rating. This rating states that the Elite LED luminaires deliver effective lighting and meet the very demanding and stringent energy-efficient operation guidelines of the Energy Star program. Elite LEDs also meet the requirements of California Title 24 and the International Energy Conservation Code for High Efficacy luminaires.

4

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


The Ultimate Source of Sustainability...

up to 17 YEARS

Compliance

Green Design

• UL/cUL listed luminaires • California Title 24–2008 - High Efficacy Compliant • AIR-SHUT™ Energy code • Washington State • (IECC) International Energy Conservation Code • New York State • and additional state and federal codes • ASTM–E238 Certified airtight • Energy Star

Sustainability - “…meet the needs of the present without compromising the ability of future generations to meet their own needs.” The green-designed Elite LED luminaires are today’s sustainable lighting solution. Our environmentally friendly designs feature a reduction in energy, introduce no hazardous chemicals at the end of usable life and can be used for many, many years. If lighting in your home operates for 2 hours in the morning and 4 hours in the evening, it will be over 17 years before you even need to perform maintenance on the Elite Lighting eco-friendly LED downlight. Elite luminaires help you reduce your carbon footprint.

Energy Savings

Reliability

Compared to standard incandescents, the Elite LED luminaire uses less than 75% of the energy and lasts 50 times longer. Our efficiently engineered luminaire will save thousands of dollars over its lifetime.

Elite LEDs are rated to last 50,000 hours, which is equivalent to 17 years when operated 6 hours per day. By that time, Elite LED luminaires are still producing 70% of their initial light, and are reliably maintenance-free for 17 years.

$1,400.40 SAVINGS

$7,245.00 SAVINGS

Incandescent

CFL

LED

COST OF OPERATION ( 9 Luminaires installed at 50,000 hours of operation) Comparison based on 50,000 hours of operation, $35/hr labor, 15 min relamp time, $0.10/kwh, and replacement cost of $2/BR30 and $6/18W CFL Typical Application Number of luminaires in a typical space Life of lamp Cost of lamp Kwh (cost of energy) Labor $/hr Time required to re-lamp (minute) Watts consumed per lamp Typical Luminaire Duration of analysis # of lamps required Kilo-watts consumed Cost of electricity Cost of lamps Lamp replacement labor $ Total cost over 50k hours LED Savings over source

65w BR30 9 2,000 $2.00 $0.10 $20.00 15 65

18w CFL 9 12,000 $6.00 $0.10 $20.00 15 20

Elite LED - RL630-14W-120V-DIM-FL-30K-W-WH 9 50,000 $$0.10 (See pages $20.00 68 for further 15 details) 14

50,000 25 3,250 $325.00 $50.00 $500.00 $875.00 $805.00

50,000 5 1,000 $100.00 $30.00 $100.00 $230.00 $160.00

50,000 700 $70.00 $$$70.00 $-

LED savings in a room

$7,245.00

$1,400.40

$-

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

5


Environmental Benefits Reduce your ‘Carbon Footprint’. 75% reduction in energy consumption will make a huge impact on your carbon footprint. Using less electricity means less carbon emissions resulting in

a cleaner, brighter environment for our children.

6

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


Impact Reduction “Use and consume” was the mantra of past generations. Today’s green initiative is to use less and recycle more. As citizens of the global economy, we press our representatives to mandate less consumption and less waste. Globally, we are tightening our belts to reduce our appetite for fossil fuels. In response to that tightening, Elite presents a series of green-friendly luminaires that use up to 75% less energy than their incandescent counterparts, 35% less energy than CFL and have been produced without the carcinogenetic materials lead and mercury found in common fluorescent lighting. Lighting energy consumed in the average commercial or residential space is the primary cause of carbon emissions from power plants. 20% - 30% of a business or a household’s energy consumption is attributed to lighting. Traditional 65 watt BR30 consumes over 4 times the energy of the eco-friendly Elite Lighting 14 watt LED luminaires and a 32W. Compact flourescent lamp consumes 35% more energy than the of the eco-friendly Elite Lighting 21 watt LED luminaires. The green Elite Lighting LED luminaire saves up to 75%energy and makes more usable light.

Resource conservation and preservation can be achieved with Elite’s LED luminaires. Our sustainable design will not harm the global ecological system at the end of its life. Since Elite LED luminaires have no mercury or lead in their construction, recycling or disposal does not introduce these carcinogenic compound into the ecosystem. Specifying Elite LED luminaires makes environmental responsibility easy. Peak-demand charges added to the energy charges required to cool a space can be colossal. Why then do we add heat to the space? Did you know that the typical incandescent lamp wastes nearly 90% of the energy it consumes by producing heat? Cooler-running ecofriendly Elite LED luminaires can produce the cooling energy-load cost added from lighting by one fourth.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

7


Sustainability Building owners have come to accept the expense of lighting and required maintenance of luminaires. Elite LED luminaries virtually eliminate maintenance expenses three ways: They reduce energy consumption up to 75%; operate for many years requiring no lamp maintenance; and contain no lead or mercury while reducing carbon emissions.

8

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


hospitality Hospitality lighting requires long and reliable operation. Elite offers a complete line of round and square aperture downlights in 3”, 4”, 5”, 6” and 8” product line. Often, hospitality lighting requires varying apertures and light levels. Our eco-friendly product offering is engineered to meet these needs. Standard incandescents need to be replaced every 30-45 days. Compact fluorescents require maintenance about every one to one and a half years. Elite LED luminaires can operate continuously for over 5 years! With the introduction of Elite’s LED luminaires, 24-hour luminaire operation costs can be dramatically reduced. Maintenance cost savings, especially where many luminaires are installed can be profound. General lighting in upscale lobbies where art and other precious wall hangings are displayed requires standard lighting sources to have UV and IR filters. The Elite LED light engine has been specifically designed to produce no harmful rays. This means even more savings, since you do not have to purchase special covers and filters to protect precious wall coverings or displays. A reduction in lighting power and a huge reduction in the heat generated can reduce the load on cooling systems. Elite LED luminaires save money by requiring less operation of the existing cooling system. On new projects, the required tonnage can be reduced, saving even more money by reducing initial investments. You spend days, sometimes even weeks, perfecting a hospitality lighting design. You create a mood, set an atmosphere, and develop the lighting to complement the architecture. You know that as the system ages, it typically is not appropriately maintained. Often, wrong lamps are used, giving the wrong color temperature. Something will be done to comprise your design. Elite LED luminaries operate for years before needing maintenance, keeping the integrity of your design pure for years.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

9


10

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


Maintenance Reduction 50,000 hours of operation means a large reduction in lamp maintenance.

HEALTHCARE LIGHTING Elite LED luminaires are available in a warm white lamp color temperature. This complements healthcare décors in ways that have been proven to reduce patient stress, thus creating an atmosphere conducive to faster healing. Elite has literally hundreds of trim options for our LED luminaires. There are many trim color options: enough to design any mood into a space. Combined with energy savings and reduced maintenance costs, these standard features make Elite LEDs ideal for healthcare facilities, waiting areas and patient rooms. Available Finishes: Baffle • White • Black • Copper • Bronze • Satin Nickel Reflector • Clear anodized (chrome) • Satin Haze • White • Black • Copper • Satin nickel • Gold • Bronze • Wheat Hospital and doctor waiting areas always seem to be in use. Coordinating maintenance to spot re-lamp one of 12-15 luminaires every month can be exhausting and very expensive. After 50,000 hours of operation, Elite LED luminaires will still be producing 70% of their initial light output. Operating 24 hours a day for over 5 years without requiring re-lamping lead to huge maintenance savings. Lighting over patient beds can make patients extremely uncomfortable; excessive glare, leading to light sensitivity, can adversely affect their recovery. Elite LED luminaires are dimmable. Down to 15% when standard wall dimming controls are used. Specify a control with low end adjustments and Elite’s LEDs can be dimmed down to 5%.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

11


12

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


Quality High color rendering, comfortable color temperature and maintenance interruption are reduced to once a decade allowing your people to focus on the job at hand without the normal distractions. COMMERCIAL LIGHTING Today’s commercial lighting specifications are written with the end user in mind. Individual user control and managing perceived glare are just some of the requirements you must meet, and Elite LED luminaries are designed for these specifications. Elite LED luminaires are designed for these specifications. Available in 2,700K, 3,000K, 3,500K, 4,100K and 5,000K color temperatures, Elite LED luminaires are warm and friendly. Elite Lighting’s eco-friendly LED luminaire is engineered to control glare from direct source and reflected sources maintaining a comfortable 45º to 55° cutoff. Its dimmability is down to 15% with standard dimming controls and down to 5% with standard low-end adjustment dimmers. The quantity of light (from 340 lumens to over 1120 lumens from the luminaire) delivered equivalent ranges from 65w BR30 up to a 32w compact fluorescent and the color rendering is 85+. The lumen distribution of Elite LEDs is ideal for general office lighting. Elite LED luminaires lower energy costs and the dimming feature allows conference rooms to be dimmed for projector presentations. The dimming option can also be utilized for daylight harvesting in general office areas. Using less energy, suitable for use with daylight harvesting, quality color and comfort and no need to re-lamp for years makes the Elite LED luminaires a perfect specification for any commercial space. Commercial lighting is not just for interior spaces: covered entry ways, soffit over hangs and covered pedestrian walkways need lighting specified too. The eco-friendly Elite LED luminaire is approved for use in temperatures down to –22°F (-30°C) and up to 105°F (40°C). Specific cataloged luminaires from Elite can be installed under insulation, making it one of the only LED luminaires that is IC (Insulation Covered) rated from UL. For outdoor and commercial specification, luminaire using less than 6 watts up to 21 watts and requiring no lamp maintenance for years, Elite LED luminaire is the only choice for today’s energy-compliant commercial lighting specification.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

13


Benefits Green-design Elite LED luminaires do not produce UV or IR, so special shielding is no longer required for highlighting merchandise. Generated heat is reduced, which lowers AC loads and safely lights precious color pigments. retail Elite LED luminaire downlights are an ideal choice for retail applications. They provide specification-grade lighting for any department. Elite LED luminaires present the purest full spectrum light to best illuminate your products. Additionally, Elite LED luminaires generate no UV or IR. This means even the subtlest color variations will not fade or be harmed by the general lighting. Operation from 6 watts up to 21 watts means that the larger your space is, the more you save and by meeting the strict energy codes in effect today, you can qualify for rebates and energy credits. The full-spectrum light produced by the Elite LED luminaire fully enhance every subtle color in your product. Quality control in our factories assures that the color temperature and color rendering of each luminaire is visually the same. Our superior quality control methods also assure a long life span of 50,000 hours. Ultraviolet (UV) light destroys your products. Common fluorescent, HID and incandescent light sources require additional shielding and cost to remove harmful UV light. Elite LED luminaires are engineered to produce no UV, so there is no added cost or risk of UV damage to your most valuable merchandise. Considering an 8-hour a day operation, traditional incandescent sources require lamp changes 35 times per luminaire over a 12-year period and standard fluorescent sources would be changed 3 times. The Elite LED luminaire would not require lamp maintenance for another 5 years, so the maintenance savings gained from specifying eco-friendly Elite LED luminaires is significant.

14

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

15


Going green Using Elite LED Luminaires in the home is an obvious choice. They save energy, reduce time spent changing lamps, keep the warm color and are dimmable. Elite LED luminaries make a home green. residential Before homeowners change from the common incandescent light, they must know that the new lighting is going to have the same look and feel. Elite LED luminaries have been designed to create the warmth and feel of incandescent lighting. Our color rendering is excellent: color temperature available are 2,700K, 3,000K, 3,500K, 4,100K, and 5,000K and our cutoff angle is 55°. The Elite LED luminaire can be dimmed to meet the requirements of any mood or atmosphere. Among the most important things in life are health and family. Eco-friendly Elite LED luminaires protect both. There are no carcinogenic chemicals or harmful rays produced by our luminaire. Luminaires with no PCBs, UV, mercury, and minimal infrared means your family is safe and healthy. Elite LED luminaires are made for architectural lighting in and around the home. The many trim options available make the Elite LED luminaire ideal for canopy, soffit and covered entry ways. Elite LED luminaires will operate at temperatures for as low as –22°F (-30°C) and as high as 105°F (40°C) which makes them ideal for energy-efficient lighting in the coldest and hottest environment. 16

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


A typical kitchen space lit with 12, 65-watt BR30 incandescent luminaires consumes 780 watts of power. By using the Elite retrofit, the total power consumed can be reduced to 192 watts, a 75% savings. Load reduction on the cooling system is an additional bonus to this dramatic energy savings.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

17


table of contents 2X2 led direct/indirect

module led retrofit

2X2-OD-LED............................ 22

architectural led downlight

hv6-led..................................26 hvj6-led................................27 hvr6-led................................28 6’ led optics.........................30 hv8-led..................................32 hvj8-led................................33 hvr8-led................................34 8” led optics........................36 hh4sq-led..............................38 h6ic-led.................................40 6” led optics........................42 h5ic-led.................................44 5” led optics........................45 h4-led....................................46 h4ic-led.................................47 4” led optics........................48 h3-led....................................50 h3ic-led.................................51 3” led optics........................52 architectural led cylinder

ex4-led...................................56 4” led round optics.............57 ex6-led...................................58 6” led round optics.............59 ex4sq-led...............................60 4” led square optics...........61 ex6sq-led...............................62 6” led square optics...........63

18

rl630..................................... 68 rl607..................................... 72 ld6ic-at................................ 76 ld6ric-at.............................. 77 rl530..................................... 78 rl507..................................... 82 ld5ic-at................................ 86 ld5ric-at.............................. 87 rl430..................................... 88 rl407..................................... 91 ld4ic-at................................ 94 ld4......................................... 95 ld4r-at................................. 96

6” led housing

b6ic-led.............................. 100 b6ric-led............................ 101 6” led l600 series baffle trim ...................... 102 6” led l600 series reflector trim ................ 104 6” led l600 series lensed trim ...................... 106 6” led l600 series square trim . .................... 110 b26ic-led............................ 112 b26ric-led.......................... 113 6” led trims for b26ic & b26ric .................. 114

5” led housing

b5ic-led.............................. 116 b5ric-led............................ 117 5” led l500 series baffle trim ...................... 118 5” led l500 series reflector trim ................ 120 5” led l500 series lensed trim ...................... 122 b25ic-led............................ 124 b25ric-led.......................... 125 5” led trims for b25ic & b25ric .................. 127

4” led housing

led-4-ic-11w...................... 128 led-4-11w........................... 129 led-4-r-11w....................... 130 4” led baffle trims......... 131 4” led reflector trims... 132

3” led housing

led-3-ic-6w........................ 134 led-3-6w............................. 135 led-3-r-6w......................... 136 3” led baffle trims......... 137 3” led reflector trims... 138

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


table of contents led undercabinet

led puck light

elite flexible led tape light

eum-led.............................. 140 accessories....................... 143

led-hu series.................... 152 led-em series.................... 154 transformer.................... 157

single color...................... 160 rgb color.......................... 162 accessories....................... 164

led linia cove

dimming matrix................ 166

sl2-led................................ 144 accessories....................... 146

MAXILUME

led step light

A R C H I T E C T U R A L

L I G H T I N G

W W W . M A X I L U M E . C O M

st8 series........................... 149 st7 series........................... 149 st4 series........................... 150 st3 series........................... 150 se series............................. 151

all products are u.s. and foreign patent pending

LED

CFL

HID

CMH

LV

INC

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

19


product description Retrofit Module A Retrofit Module consists of replacing components in the lighting system which makes it use energy more efficiently. This entails adding new components to an existing frame or housing. The following products are considered retrofit products: Architectural LED Retrofits

HVJ6-LED (page 27) 6” LED Retrofit for Existing Architectural downlights

HVJ8-LED (page 33) 8” LED Retrofit for Existing Architectural downlights

LED Retrofits RL630 - 6” LED Baffle retrofit for existing Incandescent Downlights (page 68) RL607 - 6’ LED Reflector retrofit for existing Incandescent Downlights (page 72) RL530 - 5” LED Baffle retrofit for existing Incandescent Downlights (page 78) RL507 - 5” LED Reflector retrofit for existing Incandescent Downlights (page 82) RL430 - 4” LED Baffle retrofit for existing Incandescent Downlights (page 88) RL407 - 4” LED Reflector retrofit for existing Incandescent Downlights (page 91) Remodel A remodel fixture is used when attic access is not available or is very difficult to access. The fixture is supported by the ceiling material and does not tie into ceiling or wood joist. Elite LED offers the following products that are considered LED remodel products: Architectural LED Remodel

HVR6-LED (page 28) 6” LED Remodel for Existing Architectural downlights

HVR8-LED (page 34) 8” LED Remodel for Existing Architectural downlights

LED Remodel LD6RIC-AT

- 6” IC rated remodel housing ( must be used with RL630 or RL607 LED module) (page 76)

LD5RIC-AT

- 5” IC rated remodel housing (must be used with RL530 or RL507 LED module) (page 86)

LD4R-AT

- 4” Remodel housing (must be used with RL430 or RL407 LED module) (page 96)

B6RIC-led

- 6” IC rated Remodel LED housing (page 101)

B26RIC-LED - 6” Shallow IC rated Remodel LED housing (page 113) B5RIC-LED

- 5” Remodel IC rated LED housing (page 117)

B25RIC-LED - 5” Shallow IC rated Remodel LED housing (page 125)

20

LED-4-R

- 4” Remodel LED housing (page 130)

LED-3-R

- 3” Remodel LED Housing (page 136)

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


product description New Construction LED Fixtures New Construction LED downlights are installed prior to instllation of ceiling material such as drywall or lay in ceilings. These Downlights are held in place using bar hangers in a lay-in ceiling or attached to a wood joist. Elite LED downlights are engineered to accommodate spaces with height restrictions as small as 4 inches. The following downlights are considered to be New construction LED downlights: Architectural New Construction LED Downlights HV6-LED - 6” Architectural LED Downlight utilizing dual optic technology (page 26) HV8-LED - 8” Architectural LED Downlight utilizing dual optic technology (page 32) HH4SQ-LED - 4” Square Architectural LED Downlight (page 38) EX4-LED - 4” Architectural LED Downlight utilizing Philips fortimo LED component (page 56) EX6-LED - 6” Architectural LED Downlight utilizing Philips fortimo LED component (page 58) EX4SQ-LED - 4” Square Architectural LED Downlight utilizing Philips Fortimo LED component (page 60) EX6SQ-LED - 6” Square Architectural LED Downlight utilizing Philips Fortimo LED component (page 62) H6IC-LED - 6” Architectural IC rated LED Downlight (page 40) H5IC-LED - 5” Architectural IC rated LED Downlight (page 44) H4IC-LED - 4” Architectural IC rated LED Downlight (page 47) H4-LED - 4” Architectural LED Downlight (page 46) H3IC-LED - 3” Architectural IC rated LED Downlight (page 51) H3-LED - 3” Architectural LED Downlight (page 50)

New Construction LED Downlights LD6IC-AT

- 6” IC rated New construction housing (page 76)

( must be used with RL630 or RL607 LED module) LD5IC-AT

- 5” IC rated New construction housing (page 86)

( must be used with RL530 or RL507 LED module) LD4IC-AT

- 4” IC rated New construction housing (page 94)

( must be used with RL430 or RL407 LED module) LD4

- 4” New construction housing (page 95)

( must be used with RL430 or RL407 LED module) B6IC-LED

- 6” IC rated New construction housing (page 100)

B26IC-LED - 6” Shallow IC rated New construction housing (page 112) B5IC-LED

- 5” IC rated New construction housing (page 116)

B25IC-LED - 5” Shallow IC rated New construction housing (page 124)

all products are u.s. and foreign patent pending

LED-4-IC

- 4” IC rated New construction housing (page 128)

LED-4

- 4” New construction housing (page 129)

LED-3-IC

- 3” IC rated New construction housing (page 134)

LED-3

- 3” New construction housing (page 135)

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

21


2x2 led direct/indirect downlight

Spacing Criteria: 1.2 • Lumens: 2621 • Life Span: 50,000 hours The new Elite LED Architectural OD-LED fixture adopts the latest technology in optic technology for use in many commercial applications. As a result of extensive research and development, it provides a very pleasant soft light that is comfortable to the eye and provides great illumination. With a CRI in the 90s and a great thermal management design, the OD-LED lay in will be the perfect fit for any application. OPTICS - By using a frosted extruded acrylic lens, the OD-LED gathers the light scattered by the LED chips and shapes it into functional beams that will provide even illumination throughout any given environment. Our frosted acrylic lens will not only redirect high angle rays to reduce glare but will also direct low angle rays into usable light. The lens also pivots down for easy maintenance if needed. DURABILITY - Heavy duty 20 gauge aluminum housing is engineered for maximum strength. Corners interlock to prevent aesthetical damage to fixture. All sides and corners are tuned in and hemmed to remove sharp edges for safe handling and installation. 32 LED light engines are attached to a die-cast heat sync that has undergone advance thermodynamic testing to pinpoint hot spots and keep the LED engines cool. Our advanced thermal management system is composed of a high grade aluminum extrusion that allows the light output of the LED engines to be maintained at 70% of initial lumens at 50,000 hrs of operation. The advanced thermal management system was designed with deep pockets that allow air to circulate through them and pull heat away from the lighting engines. PENDING

PERFORMANCE - The OD-LED architectural lay in fixture consumes 86 watts of power and puts out 2600 lumens. It meets higher efficacy codes and compliances at 55 lpw. The light engines found in the OD-LED are rated at 92CRI at a 4100K color temperature as rated and tested to LM-79 and LM-80 standards. LED driver is rated for 50 to 60Hz at 120V input, produces less than 10% THD, and has a power factor of .90 to 1.00. 277V version is also available upon request. Comes standard with step dimming ballasts. It also comes with NEC required ballast disconnect as a standard. Dimming - The 22-OD-LED comes standard with step dimming capabilities. Dual driver wiring gives the option to have Bi-Level switching and furthermore saving energy costs. MAINTENANCE - LED engines and Driver can be accessed through the bottom by removing the lamp shield and three screws that hold the side reflectors. LISTING - UL/ C-UL listed to US and Canadian standards. WARRANTY - Guaranteed for 3 years against mechanical defects.

Ordering information: ( Example: 22-od-led-48-41k-120)

22

22

od

fixture size 2X2

series OD - Oracle Direct/Indirect

led type LED

48

41K

120

wattage 48

CCT 35K-3500k 41K-4100K 50K - 5000k

voltage 120V 277V

emergency option EMG

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


2x2 led direct/indirect downlight dimension

5-11/16”

23-11/16”

23-3/4” INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120 60Hz 350mA 700mA 48W(+/-5%) 40W 9% >0.9

photometrics TRIM: 22-OD-LED-48-41k-120

test no.: lli 0809-14

lumens: 2621

Candela Tabulation 0.0 0 . . . . . 846.87 5 . . . . . 850.95 10 . . . . 831.34 15 . . . . 818.33 20 . . . . 776.17 25 . . . . 737.15 30 . . . . 692.67 35 . . . . 637.69 40 . . . . 579.30 45 . . . . 523.95 50 . . . . 467.93 55 . . . . 415.67 60 . . . . 367.80 65 . . . . 323.83 70 . . . . 285.10 75 . . . . 242.94 80 . . . . 199.53 85 . . . . 113.22 90 . . . . 17.77

213

425

638

841

Zonal Lumens Summary Zone 0-30 0-40 0-60 0-90

Lumens %Lamp 657.76 N.A. 1075.02 N.A. 1921.41 N.A. 2621.75 N.A.

spacing criteria: 1.22

%Fixt 25.1 41 73.3 100

22.5 846.87 839.06 828.28 809.15 780.59 740.51 694.03 643.86 590.59 534.21 479.19 426.23 373.66 327.06 281.11 232.00 174.84 98.83 19.61

45.0 846.87 844.55 834.36 815.03 790.78 753.28 714.81 670.48 618.95 564.90 509.18 455.39 399.15 346.18 292.12 234.86 166.16 90.33 18.59

67.5 846.87 848.40 838.63 822.03 795.60 767.12 729.93 687.45 643.68 592.80 542.74 490.32 437.36 380.78 321.16 239.58 157.28 82.95 15.71

90.0 846.87 838.73 836.18 816.96 800.63 771.58 732.42 691.09 649.42 609.26 560.07 503.26 453.73 396.59 333.57 238.18 155.53 80.91 14.64

Room Cavity Ratio

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0% 0%

0 1 2 3 4 5 6 7 8 9 10

103 93 84 76 69 64 59 54 51 47 44

100 90 81 74 67 62 57 53 49 46 43

96 82 71 62 55 49 44 40 37 34 31

92 79 68 60 53 47 43 39 36 33 31

88 76 66 57 51 46 41 38 35 32 30

86 70 57 47 40 35 30 26 24 21 19

103 88 76 66 58 52 47 42 39 35 33

103 84 70 59 50 44 39 35 31 28 26

103 80 64 53 44 38 33 29 26 23 21

RC - Ceiling Cavity Reflectance

all products are u.s. and foreign patent pending

100 86 74 65 57 51 46 42 38 35 32

100 82 68 58 50 43 38 34 31 28 26

100 79 63 52 44 38 33 29 26 23 21

96 79 66 56 49 42 38 34 30 28 25

96 76 62 51 43 37 33 29 26 23 21

92 76 64 55 47 42 37 33 30 27 25

92 74 60 50 43 37 32 28 25 23 21

88 74 62 53 46 41 36 32 29 27 24

88 72 59 49 42 36 32 28 25 23 21

RW - Wall Reflectance

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

23


LED innovation at its best

cooLED technology allows the life of the LED Engine to reach its published life of 50,000 hrs, therefore giving you a peace of mind.

24

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


The all new HV-LED series architectural downlight features the most versatile LED components found in the Lighting industry today. It features a proprietary plug and play module that can be interchanged to different beam distributions ( Narrow, Medium, and Wide) and color temperatures (3000K, 3500K and 4100K). Our exclusive module is designed to fit into existing architectural housings, making it a reliable solution for retrofitting projects. CooLED Thermal Management System Through extensive research and development, HV-LED architectural downlights have cooLED technology that allows the smooth flow of air to circulate through the fins of the module, causing the heat to be transferred to the surrounding environment and away from the LED engine. cooLED technology allows the life of the LED Engine to reach its published life of 50,000 hrs, therefore giving you a peace of mind. Optics and Performance HV-LED proprietary optilux technology consists of a dual reflector design that combines unmatched performance with visual comfort. Since the LED Light source is regressed to the highest point of the trim, visual cutoff is eliminated and glare is dramatically reduced. The operating system consumes a minimal 21 watts and puts our more than 970 usable lumens with our 3000K CCT LED engine and 1121 usable lumens using our 4100K CCT LED engine. The HV-LED features a simple Dim driver that has capabilities of dimming down to 15% with a 0-10 volt dimmer.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

25


hv6-led 6” Architectural led downlighting

Architectural

MAXILUME A

C B D A Height = 8-1/2” B Trim Aperture = 6-1/8” C Cut-out = 6-3/4” D Trim Outside Dia. = 7-3/8” E Width = 16”

E

F

F Length = 20”-33”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 6” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

6 INCH

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens.

LED a rchitectural D OWN LIGH T

2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory. 3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. 4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, programmed controls, etc. will require load compensating dimmers. 120v can also be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version). ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HV6-LED o 21W

o o

26

277V MVOLT (120/277)

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

PENDING

5. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. 6. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 7. Mounting Bracket - Constructed from 16 gauge steel and is supplied with C-channel that are adjustable up to 28”. Mounting bracket maybe adjusted up to 2-3/4” vertically from inside the housing. 8. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

trim type o led-6101 o led-6102 o led-6107 o led-6109 o led-6110

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

o o o o o

led-6111 led-6112 led-6113 led-6114 led-6115

o o o o

led-6121 led-6122 led-6123 led-6125

Example: HV6-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

hvj6-led 6” Architectural led retrofit downlighting

Architectural

A Height = 8-1/2” B Trim Aperture = 6-1/8” C Cut-out = 6-3/4” D Trim Outside Dia. = 7-3/8”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 6” LED dedicated Architectural Retrofit Downlight with integral LED heat management casting and driver. Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights to save anywhere from 35% up to 75% on energy cost. Fits all downlights with 6-3/4” aperture. Custom size and aperture, LED retofit and reflectors are available, please consult factory for further details. Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation.

5. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 6. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HVj6-LED o 21W

o o

277V MVOLT (120/277)

all products are u.s. and foreign patent pending

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

trim type o led-6101 o led-6102 o led-6107 o led-6109 o led-6110

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

o o o o o

led-6111 led-6112 led-6113 led-6114 led-6115

o o o o

led-6121 led-6122 led-6123 led-6125

Example: HVJ6-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

LED a rchitectural retrofi t DOW NLI GHT

2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

programmed controls, etc. will require load compensating dimmers. 120v can also be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version).

6 INCH

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens.

PENDING

27


hvR6-led 6” Architectural led remodel downlighting

Architectural

MAXILUME

A Height = 8-1/2” B Trim Aperture = 6-1/8” C Cut-out = 6-3/4” D Trim Outside Dia. = 7-3/8” E Width = 7-1/2” F Length = 12-3/4” G Flange = 1-1/2”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 6” LED dedicated Architectural Remodel Downlight with integral LED heat management casting and driver. Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Designed for remodel applications. Designed for fast and easy installation in existing plaster or mechanical ceilings and provide energy efficient LED Lighting to save anywhere from 35% up to 75% on energy cost. Custom size and aperture, LED remodel and reflectors are available, please consult factory for further details. Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

6 INCH LED a rchitectural remodel DOWNL IGHT 28

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens. 2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory. 3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. 4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, programmed controls, etc. will require load compensating dimmers. 120v can also ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HVR6-LED o 21W

o o

277V MVOLT (120/277)

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

PENDING

be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version). 5. MOUNTING FRAME - Die-formed construction for maximum heat dissipation and rust protection. 6. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 7. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

trim type o led-6101 o led-6102 o led-6107 o led-6109 o led-6110

o o o o o

led-6111 led-6112 led-6113 led-6114 led-6115

o o o o

led-6121 led-6122 led-6123 led-6125

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

Example: HVR6-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

6” lED photometrics

Architectural

hv6-led-21w-mvolt-dim-fl-30k-led-6101-shz / hvJ(R)6-led-21w-mvolt-dim-fl-30k-led-6101-shz input watts: 21 lumens: 974 cri: 85 efficacy: 41 LPW cct: 3000k Candle Power Distribution (Candelas)

90°

80°

424

70° 849

Zone 0-300 0-400 0-600 0-900

Lumens 828 886 952 974

%Lamp 85.3 91.3 98.1 100.3

%Fixt 85.03 91 97.8 100

60°

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

3950 2855 1905 1206 314

3950 2855 1905 1206 314

3950 2855 1905 1206 314

50°

1273 40°

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30°

1697 0°

20°

10°

4’ 6’ 8’ 10’ 12’

106.09 47.15 26.52 16.97 11.79

4.7’ 7.1’ 9.4’ 11.8’ 14.2’

Distance to Plane

Initial Nadir Footcandles

Beam Spread

Room Cavity Ratio

Beam Angle: 61°

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

Zone

Lumens

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

150 369.64 308.78 57.85 39.46 26.92 14.64 6.19 .9

RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 84 80 77

117 112 107 102 98 93 90 86 82 79 76

111 105 99 94 89 85 81 77 73 70 67

107 102 96 92 87 83 79 76 72 69 67

102 98 94 89 85 81 78 75 71 69 66

119 111 104 98 92 87 83 79 75 72 68

119 109 100 93 87 82 77 73 70 66 63

119 107 97 90 83 78 73 69 66 63 60

RC - Ceiling Cavity Reflectance

117 109 103 97 91 86 82 78 74 71 68

117 107 99 92 86 81 77 73 69 66 63

117 105 96 89 83 78 73 69 66 62 60

111 104 96 90 85 80 76 72 69 66 63

111 102 94 87 82 77 73 69 65 62 59

107 100 94 89 84 79 75 72 68 65 62

107 99 92 86 81 76 72 68 65 62 59

102 97 92 87 82 78 74 71 68 65 62

102 96 90 85 80 76 72 68 65 62 59

90°

80°

424

467

70° 849

934

Zonal Lumens Summary Zone 0-300 0-400 0-600 0-900

Lumens 911.26 974.89 1047.92 1071.81

%Fixt 85 91 97.8 100

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

4345 3141 2096 1327 346

4345 3141 2096 1327 346

4345 3141 2096 1327 346

50°

1273 40°

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30°

1697 1867 0°

20°

10°

Beam Angle: 61° 51.87 29.17 18.67 12.97

7.1’ 9.4’ 11.8’ 14.2’

Distance to Plane

Initial Nadir Footcandles

Beam Spread

Room Cavity Ratio

4.7’

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

test no.: 26606-2 spacing criteria: 0.8

Zone

Lumens

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

165 406 339.66 63.63 43.41 29.62 16.1 6.81 .99

RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 83 80 77

116 111 106 102 97 93 89 86 82 79 76

111 105 99 94 89 84 80 77 73 70 67

106 101 96 91 87 83 79 75 72 69 66

102 98 93 89 85 81 78 74 71 68 66

119 111 104 98 92 87 82 78 75 71 68

119 109 100 93 87 82 77 73 69 66 63

119 107 97 89 83 78 73 69 66 62 59

RC - Ceiling Cavity Reflectance

116 109 102 96 91 86 82 78 74 71 68

116 107 99 92 86 81 77 73 69 66 63

116 105 96 88 82 77 73 69 65 62 59

111 103 96 90 85 80 76 72 68 65 62

111 102 94 87 81 77 72 69 65 62 59

106 100 94 88 83 79 75 71 68 65 62

106 99 92 86 81 76 72 68 65 62 59

102 97 91 87 82 78 74 71 67 64 62

90°

80°

424

488

70° 849

976

Zonal Lumens Summary Zone 0-300 0-400 0-600 0-900

Lumens 952.68 1019.54 1095.54 1120.51

%Fixt 85 91 97.8 100

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

4543 3283 2190 1386 358

4543 3283 2190 1386 358

4543 3283 2190 1386 358

50°

1273 40°

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30°

1697 1952 0°

20°

10°

4’ 6’ 8’ 10’ 12’

122 54.22 30.5 19.52 13.56

4.7’ 7.1’ 9.4’ 11.8’ 14.2’

Distance to Plane

Initial Nadir Footcandles

Beam Spread

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

Room Cavity Ratio

Beam Angle: 61°

Zone

Lumens

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

172.5 425.08 355.1 66.52 45.38 30.96 16.83 7.11 1.03

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 83 80 77

116 111 106 102 97 93 89 86 82 79 76

111 105 99 94 89 84 80 77 73 70 67

106 101 96 91 87 83 79 75 72 69 66

102 98 93 89 85 81 78 74 71 68 66

119 109 100 93 87 82 77 73 69 66 63

100 94 88 83 78 74 70 67 63 60 58

test no.: 26606-3 spacing criteria: 0.8

80% 70% 50% 30% 10% 119 107 97 89 83 78 73 69 66 62 59

RC - Ceiling Cavity Reflectance

all products are u.s. and foreign patent pending

RC RW

119 111 104 98 92 87 82 78 75 71 68

0 1867.14 1764.4 1482.91 820.82 85.58 56.10 32.89 16.17 6.27 .55 0

0% 0%

116 109 102 96 91 86 82 78 74 71 68

116 107 99 92 86 81 77 73 69 66 63

116 105 96 88 82 77 73 69 65 62 59

111 103 96 90 85 80 76 72 68 65 62

111 102 94 87 81 77 72 69 65 62 59

Candela Tabulation

Zonal Lumen Summary

Luminance Data (cd/sq.m) %Lamp 85 91 97.8 100

60°

1464

102 96 90 84 80 75 71 68 65 62 59

0 5 15 25 35 45 55 65 75 85 90

RW - Wall Reflectance

hv6-led-21w-mvolt-dim-fl-41k-led-6101-shz / hvJ(R)6-led-21w-mvolt-dim-fl-41k-led-6101-shz input watts: 21 lumens: 1121 cri: 85 efficacy: 52 LPW cct: 4100k Candle Power Distribution (Candelas)

Candela Tabulation

106 100 94 88 83 79 75 71 68 65 62

106 99 92 86 81 76 72 68 65 62 59

102 97 91 87 82 78 74 71 67 64 62

102 96 90 84 80 75 71 68 65 62 59

0 5 15 25 35 45 55 65 75 85 90 0% 0%

0 1952.01 1844.6 1550.31 858.13 89.47 58.65 34.38 16.9 6.55 .57 0

LED a rchitectural D OWN LIGH T

116.7

100 94 88 83 78 74 70 67 64 61 58

6 INCH

4’ 6’ 8’ 10’ 12’

0 1679 1604 1348 746 78 51 30 15 6 1 0

0% 0%

Zonal Lumen Summary

Luminance Data (cd/sq.m) %Lamp 85 91 97.8 100

60°

1400

0 5 15 25 35 45 55 65 75 85 90

RW - Wall Reflectance

hv6-led-21w-mvolt-dim-fl-35k-led-6101-shz / hvJ(R)6-led-21w-mvolt-dim-fl-35k-led-6101-shz input watts: 21 lumens: 1071 cri: 85 efficacy: 50 LPW cct: 3500k Candle Power Distribution (Candelas)

Candela Tabulation

Zonal Lumen Summary

Luminance Data (cd/sq.m)

Zonal Lumens Summary

test no.: 26606-1 spacing criteria: 0.8

100 94 88 83 78 74 70 67 63 60 58

RW - Wall Reflectance

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

29


6” lED optics

Architectural

MAXILUME

LED-6101 - reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, sch, shz

A= 7-1/8” B= 7-3/8”

LED-6115 - reflector w/ tempered clear glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh

A= 7-1/2” B= 7-3/8” C= 1”

LED-6114 - reflector w/ frosted glass lens REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh

A= 7-1/2” B= 7-3/8” C= 1”

LED-6107 - wall wash reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, sch, shz

A= 7-1/8” B= 7-3/8”

6 INCH

LED-6102 - baffle w/ reflector

LED a rchitectural D OWN LIGH T

baffle finish: wh, p reflector finish: cl

A= 7-1/8” B= 7-3/8” C= 1”

LED-6113 - baffle w/ tempered clear glass baffle finish: wh, p RING finish: Wh

A= 7-1/8” B= 7-3/8” C= 1”

LED-6112 - baffle w/ frosted glass lens baffle finish: wh, p RING finish: Wh

30

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

A= 7-1/2” B= 7-3/8” C= 1”

all products are u.s. and foreign patent pending


MAXILUME

Architectural

6” lED optics

LED-6109 - deco glass reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz A= 7-1/8” B= 7-3/8” C= 1-1/4”

glass finish: blue, red, green, frost LED-6110 - double ring glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz

A= 7-1/8” B= 7-3/8” C= 1-3/4”

glass finish: blue, red, green, frost LED-6111 - triple ring glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz

A= 7-1/8” B= 7-3/8” C= 2-1/4”

glass finish: blue, red, green, frost

LED-6125 - central etched float glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/8” B= 7-3/8” C= 1-1/4”

RING finish: Wh

A= 7-1/8” B= 7-3/8” C= 1-1/4”

RING finish: Wh

LED-6123 - prism deco ring glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/8” B= 7-3/8” C= 1-1/4”

RING finish: Wh

LED a rchitectural D OWN LIGH T

REFlector finish: CL, Wt, MB, SHZ, w

6 INCH

LED-6121 - stardust deco ring glass

LED-6122 - euro deco ring glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/8” B= 7-3/8” C= 1-1/4”

all products are u.s. and foreign patent pending

RING finish: Wh

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

31


hv8-led 8” Architectural led downlighting

MAXILUME

Architectural

A

C B D A Height = 9” B Trim Aperture = 8” C Cut-out = 8-1/2”

E

D Trim Outside Dia. = 9-1/8” E Width = 16”

F

F Length = 20”-33”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 8” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

8 INCH

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens.

LED a rchitectural D OWN LIGH T

2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CR. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory. 3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. 4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, programmed controls, etc. will require load compensating dimmers. 120v can also be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version). ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HV8-LED o 21W

o o

32

277V MVOLT (120/277)

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

PENDING

5. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. 6. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 7. Mounting Bracket - Constructed from 16 gauge steel and is supplied with C-channel that are adjustable up to 28”. Mounting bracket maybe adjusted up to 2-3/4” vertically from inside the housing. 8. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

trim type o led-8101 o led-8102 o led-8107 o led-8109 o led-8110

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

o o o o o

led-8111 led-8112 led-8113 led-8114 led-8115

o o o o

led-8121 led-8122 led-8123 led-8125

Example: HV8-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

hvj8-led 8” Architectural led retrofit downlighting

Architectural

A Height = 9” B Trim Aperture = 8” C Cut-out = 8-1/2” D Trim Outside Dia. = 9-1/8”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 8” LED dedicated Architectural Retrofit Downlight with integral LED heat management casting and driver. Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights to save anywhere from 35% up to 75% on energy cost. Fits all downlights with 8-1/2” aperture. Custom size and aperture, LED retofit and reflectors are available, please consult factory for further details. Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation.

5. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 6. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HVj8-LED o 21W

o o

277V MVOLT (120/277)

all products are u.s. and foreign patent pending

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

trim type o led-8101 o led-8102 o led-8107 o led-8109 o led-8110

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

o o o o o

led-8111 led-8112 led-8113 led-8114 led-8115

o o o o

led-8121 led-8122 led-8123 led-8125

Example: HVJ8-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

LED a rchitectural retrofi t DOW NLI GHT

2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

programmed controls, etc. will require load compensating dimmers. 120v can also be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version).

8 INCH

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens.

PENDING

33


hvR8-led 6” Architectural led remodel downlighting

Architectural

MAXILUME

A Height = 9” B Trim Aperture = 8” C Cut-out = 8-1/2” D Trim Outside Dia. = 9-1/8” E Width = 8-3/4” F Length = 14-1/4” G Flange = 2-1/4”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER THD POWER FACTOR 120/277 50/60Hz 208mA 1240mA 21W(+/-5%) <20% >0.9

description 8” LED dedicated Architectural Remodel Downlight with integral LED heat management casting and driver. Consuming 21 watts and producing 1121 usable lumens. Lighting is smooth and comfortable while using 25% less energy than the common 32W CFL downlight. Plus the eco-friendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (pending). Designed for remodel applications. Designed for fast and easy installation in existing plaster or mechanical ceilings and provide energy efficient LED Lighting to save anywhere from 35% up to 75% on energy cost. Custom size and aperture, LED remodel and reflectors are available, please consult factory for further details. Features Greater light output than a 32w CFL while consuming less than 21w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

8 INCH LED a rchitectural remodel DOWNL IGHT 34

1. OPTICS - MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Proprietary dual level upper and lower reflector design allows for two different light distributions (Flood • Spot), design capabilities are endless and unrestricted. Elite engineered superior quality, light engine; consuming less 21 watts and producing 1121 lumens. 2. PERFORMANCE - Operating system consumes only 21 watts of power and puts out 1121 usable lumens with a 41000K color temperature while our 3000K LED chip produces more than 970 lumens. All MAXILUME LED luminaries are rated at 85+ CRI. Our stringent chip specifications require only those Chips that produce no ultra violet and virtually no infrared. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory. 3. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. 4. Dimmable - The Elite LED lighting system is fully dimmable down to 5% initial light output and is dimmable with a 0-10 Volt dimmer. Daylight harvesting, programmed controls, etc. will require load compensating dimmers. 120v can also ITEM SELECTOR: (Please check the boxes below for the option desired) driver optics color type waTTAGE voltage o DIM o FL o 120V o 3000K HVR8-LED o 21W

o o

277V MVOLT (120/277)

Dimming

o

SP

o o

3500K 4100K

emergency o EMG

PENDING

be dimmed down to 15% of initial light output using standard incandescent wall dimmer (Produces 10 % less intial lumens than Mvolt Version). 5. MOUNTING FRAME - Die-formed construction for maximum heat dissipation and rust protection. 6. Led Driver/Junction Box - The LED driver is rated for 50 to 60Hz at 120V /277V input, produces less than 20%THD, and has a power factor between 90% and 100% and is thermally protected for additional safety. MAXILUME’s LED driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. 7. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location. Our Word - The MAXILUME LED lighting system is warranted for 3 years. As a system, we stand behind the entire MAXILUME products from housing to bar hangers. listing c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. LM79 / LM80

trim type o led-8101 o led-8102 o led-8107 o led-8109 o led-8110

o o o o o

led-8111 led-8112 led-8113 led-8114 led-8115

o o o o

led-8121 led-8122 led-8123 led-8125

REFLECTOR

baffle

RING

CL Clear SHZ Satin Haze (Low Iridescent) WT Wheat MB Black W White

WH White P Black

WH Self-Flange White Standard on all trims SCH** Self-Flange Chrome ** Only available on XX01 CL SHZ* Satin Haze * Provided w/ satin haze ring only

glass Only available on XX09, XX10 and XX11 series.

*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.

Example: HVR8-LED-21W-120V-dim-FL-30K reflector baffle glass o cl o wt op o blue o sch ow ow o red o shz o mb o green o frost

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

8” lED photometrics

Architectural

hv8-led-21w-mvolt-dim-fl-30k-led-8101-shz / hvJ(R)8-led-21w-mvolt-dim-fl-30k-led-8101-shz input watts: 21 lumens: 972 cri: 89 efficacy: 45 LPW cct: 3000k Candle Power Distribution (Candelas) 90° 80°

424 405

70° 849 810

Zonal Lumens Summary Zone 0-300 0-400 0-600 0-900

Lumens 824.27 924.09 962.14 972.42

Zonal Lumen Summary

Luminance Data (cd/sq.m) %Lamp 84.8 95 98.9 100

%Fixt 84.8 95 98.9 100

60°

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

1387 806 506 328 144

1387 806 506 328 144

1387 806 506 328 144

50°

1273 1215 40°

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30°

1697 1621 0°

20°

10°

4’ 6’ 8’ 10’ 12’

101.28 45.01 25.32 16.21 11.25

5.4’ 8.0’ 10.7’ 13.4’ 16.1’

Distance to Plane

Initial Nadir Footcandles

Beam Spread

Room Cavity Ratio

Beam Angle: 61°

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

80°

424 446

70° 849 891

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 84 80 77

117 112 107 102 98 93 89 86 82 79 76

111 105 99 94 89 85 80 77 73 70 67

107 102 96 92 87 83 79 75 72 69 66

102 98 94 89 85 82 78 74 71 69 65

119 111 104 98 92 87 83 79 75 72 68

119 109 100 93 87 82 77 73 70 66 63

119 107 97 90 83 78 73 69 66 63 59

117 109 103 97 91 86 82 78 74 71 67

117 107 99 92 86 81 77 73 69 66 62

Zone 0-300 0-400 0-600 0-900

117 105 96 89 83 78 73 69 66 62 59

111 104 96 90 85 80 76 72 69 66 62

111 102 94 87 82 77 73 69 65 62 59

107 100 94 89 84 79 75 71 68 65 62

107 99 92 86 81 76 72 68 65 62 59

/ hvJ(R)8-led-21w-mvolt-dim-fl-35k-led-8101-shz cri: 89 efficacy: 50 LPW cct: 3500k

Lumens 906.7 1016.49 1058.36 1069.66

20°

10°

5.4’ 8.0’ 10.7’ 13.4’ 16.1’

%Fixt 84.8 95 98.9 100

Distance to Plane

Initial Nadir Footcandles

Beam Spread

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

1526 886 556 361 159

1526 886 556 361 159

1526 886 556 361 159

Zone

Lumens

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

152.1 379.3 375.29 109.8 27.13 14.73 7.51 3.19 .61

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 83 80 77

116 111 107 102 98 93 89 86 82 79 76

111 105 99 94 89 85 80 77 73 70 67

106 101 96 92 87 83 79 75 72 69 66

102 98 94 89 85 82 78 74 71 68 65

119 109 101 93 87 82 77 73 69 66 63

119 107 97 90 83 78 73 69 65 62 59

RC - Ceiling Cavity Reflectance

116 109 103 97 91 86 82 78 74 71 67

116 107 99 92 87 81 77 73 69 66 62

116 105 96 89 83 78 73 69 65 62 59

111 103 97 91 85 80 76 72 68 65 62

111 102 94 88 82 77 73 69 65 62 59

106 100 94 89 84 79 75 71 68 65 62

106 99 92 86 81 76 72 68 65 62 59

102 97 92 87 83 78 74 71 67 64 61

90° 80°

424 466

70° 849 932

Zonal Lumens Summary Zone 0-300 0-400 0-600 0-900

Lumens 947.91 1062.69 1106.45 1118.27

%Fixt 84.8 95 98.9 100

60°

40°

Angle In Degrees

Average 00

Average 450

Average 900

450 550 650 750 850

1595 926 582 376 166

1595 926 582 376 166

1595 926 582 376 166

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30°

1697 1864 0°

20°

10°

4’ 6’ 8’ 10’ 12’

116.47 51.77 29.12 18.64 12.9

5.4’ 8.0’ 10.7’ 13.4’ 16.1’

Distance to Plane

Initial Nadir Footcandles

Beam Spread

BEAM DIA. MEASURED AT 10% OF NADIR F.C.

Room Cavity Ratio

Beam Angle: 61°

Zone

Lumens

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

159.02 396.54 392.35 114.79 28.36 15.4 7.85 3.33 .64

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0 1 2 3 4 5 6 7 8 9 10

119 114 109 104 99 95 91 87 83 80 77

116 111 107 102 98 93 89 86 82 79 76

111 105 99 94 89 85 80 77 73 70 67

106 101 96 92 87 83 79 75 72 69 66

102 98 94 89 85 82 78 74 71 68 65

119 109 101 93 87 82 77 73 69 66 63

119 107 97 90 83 78 73 69 65 62 59

0 1782.55 1627.78 1375.33 812.02 97.57 34.32 16.17 7.48 2.97 0.44 0

0% 0% 100 94 89 83 79 74 70 67 63 60 57

test no.: 26950-3 spacing criteria: 0.8

80% 70% 50% 30% 10%

RC - Ceiling Cavity Reflectance

all products are u.s. and foreign patent pending

RC RW

119 111 104 98 92 87 83 79 75 71 68

0 5 15 25 35 45 55 65 75 85 90

Zonal Lumen Summary

Luminance Data (cd/sq.m) %Lamp 84.8 95 98.9 100

50°

1273 1398

102 96 90 85 80 76 72 68 65 61 59

Candela Tabulation

RW - Wall Reflectance

hv8-led-21w-mvolt-dim-fl-41k-led-8101-shz / hvJ(R)8-led-21w-mvolt-dim-fl-41k-led-8101-shz input watts: 21 lumens: 1118 cri: 85 efficacy: 52 LPW cct: 4100k Candle Power Distribution (Candelas)

100 94 89 83 79 74 70 67 63 60 57

test no.: 26950-2 spacing criteria: 0.8

RC RW

119 111 104 98 92 87 83 79 75 71 68

0% 0%

116 109 103 97 91 86 82 78 74 71 67

116 107 99 92 87 81 77 73 69 66 62

116 105 96 89 83 78 73 69 65 62 59

111 103 97 91 85 80 76 72 68 65 62

111 102 94 88 82 77 73 69 65 62 59

106 100 94 89 84 79 75 71 68 65 62

106 99 92 86 81 76 72 68 65 62 59

102 97 92 87 83 78 74 71 67 64 61

102 96 90 85 80 76 72 68 65 61 59

Candela Tabulation 0 5 15 25 35 45 55 65 75 85 90 0% 0%

0 1863.57 1701.77 1437.84 848.93 102 35.88 16.90 7.82 3.10 0.46 0

LED a rchitectural D OWN LIGH T

111.41 49.52 27.85 17.83 12.38

0 1620 1480 1250 738 89 31 15 9 3 0.4 0

8 INCH

4’ 6’ 8’ 10’ 12’

Room Cavity Ratio

Beam Angle: 61°

102 96 90 85 80 76 72 68 65 62 59

0 5 15 25 35 45 55 65 75 85 90

Zonal Lumen Summary

Luminance Data (cd/sq.m) %Lamp 84.8 95 98.9 100

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

30° 0°

102 97 92 87 82 78 74 71 68 65 61

Candela Tabulation

RW - Wall Reflectance

50°

1697 1783

138.28 369.64 308.78 57.85 39.46 26.92 14.64 6.19 .9

50% 50% 30% 10%

Zonal Lumens Summary

40°

0-10 10-20 20-30 30-40 40-50 50-60 60-70 70-80 80-90

70% 70% 50% 30% 10%

60°

1273 1337

Lumens

80% 70% 50% 30% 10%

hv8-led-21w-mvolt-dim-fl-35k-led-8101-shz input watts: 21 lumens: 1069 90°

Zone

RC RW

RC - Ceiling Cavity Reflectance

Candle Power Distribution (Candelas)

test no.: 26950-1 spacing criteria: 0.8

100 94 89 83 79 74 70 67 63 60 57

RW - Wall Reflectance

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

35


8” lED optics

Architectural

MAXILUME

LED-8101 - reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, sch, shz

A= 7-1/2” B= 9-1/8”

LED-8115 - reflector w/ tempered clear glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh

A= 7-13/16” B= 9-1/8” C= 1-3/4”

LED-8114 - reflector w/ frosted glass lens REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh

A= 7-13/16” B= 9-1/8” C= 1-3/4”

LED-8107 - wall wash reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, sch, shz

A= 7-1/2” B= 9-1/8”

8 INCH

LED-8102 - baffle w/ reflector

LED a rchitectural D OWN LIGH T

baffle finish: wh, p reflector finish: cl

A= 7-1/2” B= 9-1/8” C= 1-3/4”

LED-8113 - baffle w/ tempered clear glass baffle finish: wh, p RING finish: Wh

A= 7-13/16” B= 9-1/8” C= 1-3/4”

LED-8112 - baffle w/ frosted glass lens baffle finish: wh, p RING finish: Wh

36

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

A= 7-13/16” B= 9-1/8” C= 1-3/4”

all products are u.s. and foreign patent pending


MAXILUME

Architectural

8” lED optics

LED-8109 - deco glass reflector REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz A= 7-1/2” B= 9-1/8” C= 1-1/4”

glass finish: blue, red, green, frost LED-8110 - double ring glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz

A= 7-1/2” B= 9-1/8” C= 1-3/4”

glass finish: blue, red, green, frost LED-8111 - triple ring glass REFlector finish: CL, Wt, MB, SHZ, w RING finish: Wh, shz

A= 7-1/2” B= 9-1/8” C= 2-1/4”

glass finish: blue, red, green, frost

LED-8125 - central etched float glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/2” B= 9-1/8” C= 1-1/4”

RING finish: Wh

A= 7-1/2” B= 9-1/8” C= 1-1/4”

RING finish: Wh

LED-8123 - prism deco ring glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/2” B= 9-1/8” C= 1-1/4”

RING finish: Wh

LED a rchitectural D OWN LIGH T

REFlector finish: CL, Wt, MB, SHZ, w

8 INCH

LED-8121 - stardust deco ring glass

LED-8122 - euro deco ring glass REFlector finish: CL, Wt, MB, SHZ, w A= 7-1/2” B= 9-1/8” C= 1-1/4”

all products are u.s. and foreign patent pending

RING finish: Wh

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

37


HH4SQ-led 4” LED square architectural downlight

Architectural

MAXILUME

PENDING

760

A

Height = 5-1/2”

E

Width = 7-3/4”

B

Trim Aperture = 4-1/2”

F

Length = 7-1/8”

C

Cut-out = 5-1/8”

G

Max. Length = 10”

D

Trim Outside Dia. = 5-3/4”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

4” Square LED dedicated New Construction housing with integral LED heat management casting and driver (installed on junction box). Consuming less than 14 watts and producing over 760 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65w BR30 and 25% less than the common 18w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating (Pending). Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, institution, retail and residential applications.

4 INCH LED a rchitectural D OWN LIGH T

Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing reflector that has a 45-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 760 lumens.

A. MOUNTING BRACKET - Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling.

Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable.

C. MOUNTING FRAME - Die-formed construction for maximum heat dissipation and rust protection.

Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared.

F. REFLECTOR - Self-flanged .050” aluminum reflector with low iridescent finish. Reflector provides 45-degree lamp-to-reflector image cutoff.

Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

B. RETAINING SPRINGS - Precision tooled springs secure trim to mounting frame, for effortless and tool-less installation.

D. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. E. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. OPTICS:

G. LENS - Choice of either tempered clear, tempered frosted lens fastened with two torsion springs. H. Air-Shut – Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. / c-UL-us listed for feed Through Wiring. ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage o 120V hh4sq-led o 14W o 277V

driver DIM

o

Dimming

option o EMG o BP31 C-channel

38

color 27K 30K 35K 41K 50K

o o o o o

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

trim o led-4601 o led-4617 o led-4614 o led-4615

reflec. cl wt mb shz w

o o o o o

all products are u.s. and foreign patent pending


MAXILUME

4” lED square optics

Architectural led-4601-CL - REFLECTOR REFlector finish: CL

wt

mb

shz

A = 3-1/8” B = 5-3/4” C = 4-5/8”

w

RING finish: wh

LED-4617-CL - wall wash rEFLECTOR with lens REFlector finish: CL

wt

mb

shz

w

A = 3-1/8” B = 5-3/4” C = 4-5/8”

RING finish: wh

LED-4614-CL - REFLECTOR with frosted glass lens REFlector finish: CL

wt

mb

shz

A = 3-1/8” B = 5-3/4” C = 4-5/8”

w

RING finish:

4 INCH

wh

LED-4615-CL - REFLECTOR with tempered glass lens

CL

wt

mb

shz

w

A = 3-1/8” B = 5-3/4” C = 4-5/8”

RING finish: wh

hh4sq-led-14w-120-led-4601-cl test no.: 323101 lumens: 760 spacing criteria: 1.04

Zonal Lumens Summary Zone Lumens 390.75 0-300 563.41 0-400 0 736.83 0-60 0 766.89 0-90 0 766.89 0-180

90°

Luminance Data (cd/sq.m) %Lamp N.A. N.A. N.A. N.A. N.A.

Total Luminaire Efficacy = 54 lpw

%Fixt 51 73.5 96.1 100 100

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

5420 2699 677 305 244

4690 1859 486 221 186

5412 2657 673 297 252

80°

144

70° 289

LED a rchitectural D OWN LIGH T

REFlector finish:

60° 50°

433 40° 30°

578 0°

10°

20°

the most up to date photometric data is available online @ WWW.IUSEELITE.com

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

39


h6IC-led 6” LED architectural downlight

new A Height = 7-1/2” B Trim Aperture = 6” C Cut-out = 6-1/2” D Trim Outside Dia. = 7-1/4” E Width = 7” F Length = 10”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

6” LED dedicated New Construction IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus, the eco-friendly MAXILUME LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features - Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. MAXILUME LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the MAXILUME engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator

6 INCH LED a rchitectural D OWN LIGH T

Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires MAXILUME Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUME’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the MAXILUME LED Module is engineered for quality. All MAXILUME LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The MAXILUME LED lighting system is warranted for 3 years.

40

A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically from inside the housing. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. c-UL-us listed for Damp location. Feed Through Wiring. Direct Contact with Insulation ITEM SELECTOR: Example: H6IC-LED-14W-120V-DIM-FL-30K-AT optics type waTTAGE voltage driver o 120V o DIM o FL-Flood(Standard) H6IC-LED o 14W o 277V Dimming optic accessories OPTION o BP6LED-SP-Spot o EMG o BP6LED-PE- Par emulator trim L631 L607 L656 L676 L675 L635 L636 L657

o o o o o o o o

o o o o o o o o

L659 L658 L641 L642 L652 L612 L645 L648

o o o o o o o o

L601 L601L L605 L605L L606 L606L L681 L687

o o o o o

L688 L685 L680 L689 L696

baffle W P SN CP BZ

o o o o o

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

color air-shut o 27K AT o 30K o 35K o 41K o 50K TRIM/RING reflec. o BZ o BK o CL o WH o CP o CH o RG o PB o MB o SN oW o CP o SN o BZ o SHZ

all products are u.s. and foreign patent pending


MAXILUME h6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l631w-wh test no.: lli 0809-14A1 lumens: 603 spacing criteria: .26

Zonal Lumens Summary Zone Lumens 349.13 0-300 474.81 0-400 0 570.35 0-60 0 603.86 0-90 0 603.86 0-180

6” lED photometrics

Architectural

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 57.8 78.6 94.5 100 100

Total Luminaire Efficiency = N.A.%

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

Zonal Lumens Summary Zone Lumens 365.23 0-300 506.79 0-400 0 624.58 0-60 0 674.44 0-90 0 674.44 0-180

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficiency = N.A.%

%Fixt 54.2 75.1 92.6 100 100

1041 1562 2082

the most up to date photometric data is available online @ WWW.IUSEELITE.com

h6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l607cl-wh test no.: lli 0809-14A3 lumens: 674 spacing criteria: .26

521

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com

6 INCH LED a rchitectural D OWN LIGH T

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

41


6” lED optics l631W-WH - phenolic stepped baffle

l631p-bk - phenolic stepped baffle

MAXILUME l631sn-sn - phenolic stepped baffle

baffle finish: w - WHite

baffle finish: p - black

baffle finish: sn - satin nickel

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l631cp-cp - phenolic stepped baffle

l631bz-bz - phenolic stepped baffle

l607cl-wh - reflector

baffle finish: cp - copper

baffle finish: bz - bronze

REFlector finish: CL - clear (Chrome)

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l607mb-wh - reflector

l607rg-wh - reflector

l607w-wh - reflector

REFlector finish: mb - black

REFlector finish: RG - gold

REFlector finish: w - white

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l607cp-cp - reflector

6 INCH LED a rchitectural D OWN LIGH T trims 42

Architectural

l607sn-sn - reflector

l607bz-bz - reflector

REFlector finish: cp - copper

REFlector finish: sn - stain nickel

REFlector finish: bz - bronze

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l607SHZ-wh - reflector

l611w-wh - baffle wall wash

l676w-wh - baffle w/ frosted lens

REFlector finish: SHZ - satin haze

baffle finish: bz, cp, sn, wh, p

baffle finish: bz, cp, sn, wh, p

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: wh

ring finish: bk, wh, ch, pb, sn, cp, bz

l635w-wh - baffle w/ albalite lens

l636w-wh - baffle w/ fresnel lens

l656w-wh - baffle w/ frosted dome lens

baffle finish: bz, cp, sn, wh, p

baffle finish: bz, cp, sn, wh, p

baffle finish: bz, cp, sn, wh, p

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME l675w-wh - baffle w/ prismatic lens

Architectural l657cl-wh - reflector w/ frosted dome lens

6” lED optics l659cl-wh - reflector w/ frosted lens

baffle finish: bz, cp, sn, wh, p

REFlector finish: cl, mb, rg, w, cp, sn

REFlector finish: cl, mb, rg, w, cp, sn

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l642cl-wh - reflector w/ fresnel lens

l658cl-wh - reflector w/ prismatic lens

l641cl-wh - reflector w/ albalite lens

REFlector finish: cl, mb, rg, w, cp, sn

REFlector finish: cl, mb, rg, w, cp, sn

REFlector finish: cl, mb, rg, w, cp, sn

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l645wh - designer point lens

lens finish: designer pointring finish: bk, wh, ch, pb, sn, cp, bz

l605wh/l605l - metal/plastic fresnel lens

l652wh - smooth frosted lens

l612wh - smooth frosted dome lens

lens finish: smooth frosted

lens finish: smooth frosted

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l606wh/l606l - metal/plastic drop opal lens

l601wh/l601l - metal/plastic albalite lens

lens finish: albalite - white

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l687cl-wh - square reflector

l688wh - square albalite lens

l685wh - square fresnel lens

REFlector finish: cl, mb, rg, w, cp, sn

lens finish: albalite - white

lens finish: fresnel - clear

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l681bz-wh - square baffle

l680wh - square designer point lens

l696wh - square designer frosted lens

baffle finish: bz, cp, sn, wh, p

lens finish: frosted

lens finish: frosted

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

LED a rchitectural D OWN LIGH T trims

lens finish: drop opal - frosted

6 INCH

lens finish: fresnel - clear

43


h5ic-led 5” LED architectural downlight

MAXILUME

Architectural

new A Height = 7” B Trim Aperture = 5” C Cut-out = 5-3/4” D Trim Outside Dia. = 6-1/2” E Width = 7” F Length = 10”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

5” LED dedicated IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus the MAXILUME LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the MAXILUME engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator

5 INCH LED a rchitectural D OWN LIGH T trims 44

Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the MAXILUME light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires MAXILUME Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUME’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the MAXILUME LED Module is engineered for quality. All MAXILUME LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers.

Our Word – The MAXILUME LED lighting system is warranted for 3 years. A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. c-UL-us listed for Damp location. Feed Through Wiring. Direct Contact with Insulation ITEM SELECTOR: Example: B5IC-LED-14W-120V-DIM-FL-30K-AT optics type waTTAGE voltage driver o 120V o DIM o FL-Flood(Standard) H5IC-LED o 14W o 277V Dimming optic accessories OPTION o BP6LED-SP-Spot o EMG o BP6LED-PE- Par emulator trim L530 L507 L535 L536

o o o o

o o o o

L504 L501 L505 L541

o o o o

L542 L504L L501L L505L

baffle o W o CP o P o BZ o SN

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

reflec. o BZ o CL o CP o RG

o o o o

color air-shut o 27K AT o 30K o 35K o 41K o 50K TRIM/RING MB o BK o SN W o WH o CP SN o CH o BZ SHZ o PB

all products are u.s. and foreign patent pending


MAXILUME

5” lED optics

Architectural

l530w-wh

l507w-wh

Stepped Baffle (Ordering information) l530X- xx

Reflector (Ordering information) l507X- xx

available color combinations: cp-cp, sn-sn, w-wh, p-wh, p-bk, bz-bz BAFFLE finish :

BZ

cp

reflector finish :

SN

W

P

cl

ring finish :

BK

WH

available color combinations: cp-cp, w-wh, rg-wh, mb-wh, cl-wh, mb-bk, rg-pb, cl-cH

cp

mb

rg

sn

w

CH

PB

SN

CP

ring finish :

CH

PB

SN

CP

BZ

BK

led lensed baffle trim

WH

BZ

led lensed reflector trim

l535w-wh Baffle with Frosted Lens (Ordering information) l535w- xx

l541cl-wh Reflector with Frosted Lens (Ordering information) l541cl- xx

available color combinations: cp-cp, sn-sn, w-wh, p-wh, p-bk, bz-bz

available color combinations: cp-cp, w-wh, rg-wh, mb-wh, cl-wh, mb-bk, rg-pb, cl-cH l542cl-wh Reflector with Fresnel Lens (Ordering information) l542cl- xx

l536w-wh Baffle with Fesnel Lens (Ordering information) l536x- xx available color combinations: cp-cp, sn-sn, w-wh, p-wh, p-bk, bz-bz

leD lensed trim

available color combinations: cp-cp, w-wh, rg-wh, mb-wh, cl-wh, mb-bk, rg-pb, cl-cH

led polycarbonate lensed trim l504L - Designer Dome Lens with Plastic Trim Ring

l504wh - Designer Dome Lens

lens finish: white

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

lens finish: WHite

lens finish: white

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

l505l - Fresnel Lens with Plastic Trim Ring

l505wh - Metal Fresnel Lens

h5IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l507cl-wh test no.: lli 0809-14A5 lumens: 661 spacing criteria: .20

lens finish: clear

lens finish: clear

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

Zonal Lumens Summary Zone Lumens 418.02 0-300 541.23 0-400 0 625.17 0-60 0 661.59 0-90 0 661.59 0-180

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 47 lpw

%Fixt 63.2 81.8 94.5 100 100

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

LED a rchitectural D OWN LIGH T trims

l501l - Albalite Lens with Plastic Trim Ring

l501wh - Metal Albalite Lens

5 INCH

lens finish: WHite

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

www.iuseelite.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

45


h4-led 4” LED architectural downlight

MAXILUME

Architectural

A Height = 5-1/2” B Trim Aperture = 4” C Cut-out = 4-3/8” D Trim Outside Dia. = 4-7/8” E Width = 5-1/2” F Length = 8”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 12W(+/-5%) 11W 9% >0.9

4” LED dedicated Architectural New Construction Non-IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the MAXILUME LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 11 watts and producing over 465 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the 50w BR20, 50% less energy than a 20w MR16 and 25% less than the common 13w CFL. Plus, the eco-friendly MAXILUME LED system features 70% lumen maintenance at 50,000 hours life. Features - Greater light output than a 13w CFL, a 20w MR16 or a 50w BR20 while consuming 11 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 11 watt MAXILUME LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

4 INCH

Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUMEs driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

LED a rchitectural D OWN LIGH T

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 11 watt MAXILUME LED is engineered for quality. Our superior design allows for installation in construction that requires the MAXILUME Air-Shut™ system. All MAXILUME LED luminaries are rated at 85+ CR and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The H4-LED-11W eco-friendly MAXILUME LED system is warranted for 3 years. A. Housing - Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction.

B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically from inside the housing. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. c-UL-us listed For Damp location. For feed Through Wiring. ITEM SELECTOR: (Please check the boxes below for the option desired) type h4-led

voltage 120V 277V

waTTAGE o 11W

driver o DIM-Dimming

o o

air-shut AT

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1401

waTTAGE o 11W

optics FL

o

color o 30K o 50K

finish W-WH p-WH sn-sn

o o o

finish o cp-cp o p-bk o bz-bz

ITEM SELECTOR: (Please check the boxes below for the option desired) waTTAGE optics type o FL LED1402 o 11W

color 30K 50K

o o

finish o cl-WH o cp-WH o w-wh o bz-bz o sn-wh

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-sn rg-pb mb-bk cl-sn

Example:

H4-LED-11W-120V-DIM-AT/LED1401-11W-FL-30K-W-WH 46

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

h4ic-led 4” LED architectural downlight

Architectural

IC RATED

A Height = 7-1/4” B Trim Aperture = 4” C Cut-out = 4-3/8” D Trim Outside Dia. = 4-7/8” E Width = 7-5/8” F Length = 12-1/4”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 12W(+/-5%) 11W 9% >0.9

4” LED dedicated Architectural New Construction IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in insulation covered ceilings. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the MAXILUME LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 11 watts and producing over 465 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the 50w BR20, 50% less energy than a 20w MR16 and 25% less than the common 13w CFL. Plus, the eco-friendly MAXILUME LED system features 70% lumen maintenance at 50,000 hours life. Features - Greater light output than a 13w CFL, a 20w MR16 or a 50w BR20 while consuming 11 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 11 watt MAXILUME LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

Dimmable - The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The H4-LED-IC-11W eco-friendly MAXILUME LED system is warranted for 3 years. A. Housing - Housing is IC rated for direct contact with insulation. May be installed in 2” x 8” joist construction. • Outer Die-formed aluminum construction for maximum head dissipating air chamber on top of the housing. Junction box could me accessed from inside and outside housing. • Inner – deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2” to 1-3/8” ceiling.

D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. c-UL-us listed For Damp location. For feed Through Wiring. For Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired) type h4ic-led

voltage 120V 277V

waTTAGE o 11W

driver o DIM-Dimming

o o

air-shut AT

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1401

waTTAGE o 11W

optics FL

o

color o 30K o 50K

finish W-WH p-WH sn-sn

o o o

finish o cp-cp o p-bk o bz-bz

ITEM SELECTOR: (Please check the boxes below for the option desired) waTTAGE optics type o FL LED1402 o 11W

color 30K 50K

o o

finish o cl-WH o cp-WH o w-wh o bz-bz o sn-wh

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

LED a rchitectural D OWN LIGH T

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 11 watt MAXILUME LED is engineered for quality. Our superior design allows for installation in construction that requires the MAXILUME Air-Shut™ system. All MAXILUME LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared.

C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling.

4 INCH

Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUMEs driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically from inside the housing.

sn-sn rg-pb mb-bk cl-sn

Example:

H4-LED-IC-11W-120V-DIM-AT/LED1401-11W-FL-30K-W-WH all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

47


4” lED optics

MAXILUME

Architectural

Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 4” architectural LED downlight; consuming 11 watts and producing over 465 lumens. Among the trim options are: white, black, copper, bronze or satin nickel architectural low glare baffle with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim maximizes reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes, the Elite architectural 4” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

led-1401-11w-fl-30k-w-wh

led-1401-11w-fl-30k-p-wh

Photometric Multiplier 1.0

led-1401-11w-fl-30k-cp-cp

Photometric Multiplier .92

led-1401-11w-fl-30k-p-bk

4 INCH

Photometric Multiplier .87

led-1401-11w-fl-30k-bz-bz

Photometric Multiplier .75

Photometric Multiplier .85

ITEM SELECTOR: Example: LED1401-11W-FL-30K-w-wh

LED a rchitectural D OWN LIGH T trims

type LED1401

optics FL

waTTAGE o 11W

baffle finish : BZ

bronze

cp

copper

SN

satin nickel

TRIM: led-1401-11W-fl-30k-w-wh test no.: lli 0909-17A1 lumens: 467 spacing criteria: .14

color 30K

o

finish o w-wh o p-wh o sn-sn o cp-cp o bz-bz

o

o

p-bk

trim/ring finish : WH

white

P

black

Zonal Lumens Summary Zone Lumens 298.98 0-300 368.25 0-400 0 466.88 60 0 467.36 0-90 0 467.36 0-180

BK

black

wh

white

CH

chrome

pb

sn

polish brass

satin nickel

cp

%Fixt 64.0 78.8 99.9 100 100

26,721 451 0 0 0

26,721 451 0 0 0

bronze

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

bz

copper

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 42 lpw

48

led-1401-11w-fl-30k-sn-sn

Photometric Multiplier .75

26,721 451 0 0 0

1228 2456 3684

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

4” lED optics

Architectural

led-1402-11w-fl-30k-cl-wh

led-1402-11w-fl-30k-cp-wh

Photometric Multiplier 1.0

led-1402-11w-fl-30k-sn-wh Photometric Multiplier .87

Photometric Multiplier .90

led-1402-11w-fl-30k-cl-ch

led-1402-11w-fl-30k-sn-sn

led-1402-11w-fl-30k-cp-cp

Photometric Multiplier 1.0

Photometric Multiplier .87

Photometric Multiplier .90

led-1402-11w-fl-30k-cl-sn

led-1402-11w-fl-30k-rg-wh

led-1402-11w-fl-30k-rg-pb

Photometric Multiplier 1.0

Photometric Multiplier .90

Photometric Multiplier .90

led-1402-11w-fl-30k-mb-bk

led-1402-11w-fl-30k-w-wh

Photometric Multiplier .77

Photometric Multiplier .95

Photometric Multiplier .77

type LED1402

finish o cl-wh o cp-wh o w-wh o bz-bz o sn-wh

led-1402-11w-fl-30k-bz-bz Photometric Multiplier .87

TRIM: led-1402-11W-fl-30k-cl-wh test no.: lli 0909-17A3 lumens: 495 spacing criteria: .14

Zonal Lumens Summary Zone Lumens 318.02 0-300 391.95 0-400 0 495.29 0-60 0 495.29 0-90 0 495.29 0-180

optics o FL

waTTAGE o 11W

o o o o

o o o o

rg-wh mb-wh cl-ch cp-cp

Total Luminaire Efficacy = 45 lpw

%Fixt 64.2 79.1 100 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

27,819 0 0 0 0

27,819 0 0 0 0

27,819 0 0 0 0

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

sn-sn rg-pb mb-bk cl-sn

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

color o 30K

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

1307

LED a rchitectural D OWN LIGH T trims

ITEM SELECTOR: Example: LED1402-11W-FL-30K-cl-wh

4 INCH

led-1402-11w-fl-30k-mb-wh

2615 3922 5229

49


h3-led 3” LED architectural downlight

MAXILUME

Architectural

A Height = 5-1/2” B Trim Aperture = 3-1/2” C Cut-out = 3-3/4” D Trim Outside Dia. = 3-7/8” E Width = 5-1/2” F Length = 8”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 480mA 6.6W(+/-5%) 6W <10% >0.9

3” LED dedicated Architectural New Construction NON-IC housing with the driver installed on the junction box. Designed for New Construction construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the MAXILUME LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 6 watts and producing over 350 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the equivalent 25wPAR36. Plus the eco-friendly MAXILUME LED system features 70% lumen maintenance at 50,000 hours life. Features - Greater light output than a 25w PAR36 while consuming 6 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 6 watt MAXILUME LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

3 INCH

Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUMEs driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

LED a rchitectural D OWN LIGH T

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 6 watt MAXILUME LED is engineered for quality. Our superior design allows for installation in construction that requires the MAXILUME Air-Shut™ system. All MAXILUME LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared.

B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically from inside the housing. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. c-UL-us listed For Damp location. For feed Through Wiring. ITEM SELECTOR: (Please check the boxes below for the option desired)

Dimmable - The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The H3-LED-6W eco-friendly MAXILUME LED system is warranted for 3 years. A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction.

type h3-led

voltage 120V 277V

waTTAGE o 6W

driver o DIM-Dimming

o o

air-shut AT

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1301

waTTAGE o 6W

optics FL

o

color o 35K

finish W-WH p-WH sn-sn

finish o cp-cp o p-bk o bz-bz

o o o

ITEM SELECTOR: (Please check the boxes below for the option desired) waTTAGE optics type o FL LED1302 o 6W

color 35K

o

finish o cl-WH o cp-WH o w-wh o bz-bz o sn-wh

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-sn rg-pb mb-bk cl-sn

Example:

H3-LED-6W-120V-DIM-AT/LED1301-6W-FL-35K-W-WH 50

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

h3ic-led 3” LED architectural downlight

Architectural

IC RATED

A Height = 7-1/4” B Trim Aperture = 3-1/2” C Cut-out = 3-7/8” D Trim Outside Dia. = 3-7/8” E Width = 7-5/8” F Length = 12-1/4”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 480mA 6.6W(+/-5%) 6W <10% >0.9

3” LED dedicated Architectural New Construction IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in insulation covered ceilings. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the MAXILUME LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 6 watts and producing over 350 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the equivalent 25wPAR36. Plus, the eco-friendly MAXILUME LED system features 70% lumen maintenance at 50,000 hours life. Features - Greater light output than a 25w PAR36 while consuming 6 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 6 watt MAXILUME LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. c-UL-us listed For Damp location. For feed Through Wiring. For Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired)

Dimmable - The MAXILUME LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The H3IC-LED-6W eco-friendly MAXILUME LED system is warranted for 3 years. A. Housing – Housing is IC rated for direct contact with insulation. May be installed in 2” x 8” joist construction. • Outer Die-formed aluminum construction for maximum head dissipating air chamber on top of the housing. Junction box could me accessed from inside and outside housing. • Inner – deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2” to 1-3/8” ceiling.

type h3IC-led

voltage 120V 277V

waTTAGE o 6W

driver o DIM-Dimming

o o

air-shut AT

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1301

waTTAGE o 6W

optics FL

o

color o 35K

finish W-WH p-WH sn-sn

o o o

finish o cp-cp o p-bk o bz-bz

LED a rchitectural D OWN LIGH T

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 6 watt MAXILUME LED is engineered for quality. Our superior design allows for installation in construction that requires the MAXILUME Air-Shut™ system. All MAXILUME LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared.

C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling.

3 INCH

Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. MAXILUMEs driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

B. mounting bracket – Constructed from 16-gauge steel and is supplied with C-channels that are adjustable up to 28”. Mounting brackets may be adjusted up to 2-3/4” vertically from inside the housing.

ITEM SELECTOR: (Please check the boxes below for the option desired) waTTAGE optics type o FL LED1302 o 6W

color 35K

o

finish o cl-WH o cp-WH o w-wh o bz-bz o sn-wh

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-sn rg-pb mb-bk cl-sn

Example:

H3-LED-IC-6W-120V-DIM-AT/LED1301-6W-FL-35K-W-WH all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

51


3” lED optics

MAXILUME

Architectural

Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 3” architectural LED downlight; consuming 6 watts and producing over 350 lumens. Among the trim options are: white, black, copper, bronze or satin nickel architectural low glare baffle with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim has been designed to maximize reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes, the Elite architectural 3” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

led-1301-6w-fl-35k-w-wh

led-1301-6w-fl-35k-p-wh

Photometric Multiplier 1.0

led-1301-6w-fl-35k-p-bk

Photometric Multiplier .75

3 INCH

led-1301-6w-fl-35k-sn-sn

Photometric Multiplier .75

led-1301-6w-fl-35k-cp-cp

Photometric Multiplier .92

led-1301-6w-fl-35k-bz-bz

Photometric Multiplier .87

Photometric Multiplier .85

ITEM SELECTOR: (Please check the boxes below for the option desired)

LED a rchitectural D OWN LIGH T trims

type LED1301

optics FL-Flood(Standard)

waTTAGE o 6W

o

color o 35K

finish o w-wh o p-wh o sn-sn o cp-cp o bz-bz

Example: LED1301-6W-FL-35K-w-wh

baffle bafflefinish finish: : BZ

bronze

cp

copper

SN

satin nickel

TRIM: led-1301-6W-fl-35k-w-wh test no.: lli 0909-17A1 lumens: 342 spacing criteria: .14

o

p-bk

trim/ring finish : WH

white

P

black

Zonal Lumens Summary Zone Lumens 216.76 0-300 265.50 0-400 335.61 0-600 342.27 0-900 342.27 0-1800

BK

black

wh

white

CH

chrome

pb

sn

polish brass

satin nickel

cp

copper

Total Luminaire Efficacy = 57 lpw

%Fixt 63.3 77.6 98.1 100 100

bronze

Candle Power Distribution (Candelas)

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

bz

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

18,668 903 1225 2000 5940

18,668 903 1225 2000 5940

18,668 903 1225 2000 5940

the most up to date photometric data is available online @ WWW.IUSEELITE.com

52

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

3” lED optics

Architectural

led-1302-11w-fl-30k-cl-wh

led-1302-11w-fl-30k-cp-wh

Photometric Multiplier 1.0

led-1302-11w-fl-30k-sn-wh Photometric Multiplier .87

Photometric Multiplier .90

led-1302-11w-fl-30k-cl-ch

led-1302-11w-fl-30k-sn-sn

led-1302-11w-fl-30k-cp-cp

Photometric Multiplier 1.0

Photometric Multiplier .87

Photometric Multiplier .90

led-1302-11w-fl-30k-cl-sn

led-1302-11w-fl-30k-rg-wh

led-1302-11w-fl-30k-rg-pb

Photometric Multiplier 1.0

Photometric Multiplier .90

Photometric Multiplier .90

led-1302-11w-fl-30k-mb-bk

led-1302-11w-fl-30k-w-wh

Photometric Multiplier .77

Photometric Multiplier .95

Photometric Multiplier .77

type LED1302 finish o cl-wh o cp-wh o w-wh o bz-bz o sn-wh o rg-wh o mb-wh

led-1302-11w-fl-30k-bz-bz Photometric Multiplier .87

TRIM: led-1302-6W-fl-35k-cl-wh test no.: lli 0909-17A3 lumens: 357 spacing criteria: .14

Zonal Lumens Summary Zone Lumens 223.45 0-300 275.74 0-400 0 351.44 0-60 0 357.44 0-90 0 357.44 0-180

optics o FL

waTTAGE o 6W

o o

cl-ch cp-cp

o o o

sn-sn rg-pb mb-bk

o

Total Luminaire Efficacy = 60 lpw

%Fixt 62.5 77.1 98.2 100 100

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

20,132 1354 1225 2000 2970

20,132 1354 1225 2000 2970

cl-sn

Candle Power Distribution (Candelas)

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

color o 35K

LED a rchitectural D OWN LIGH T trims

ITEM SELECTOR: Example: LED1402-11W-FL-30K-cl-wh

3 INCH

led-1302-11w-fl-30k-mb-wh

20,132 1354 1225 2000 2970

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

53


architectural LED downlight Maxilume EXCELED is the latest addition to the expanding line of architectural LED downlights. Its reflector design gathers the light scattered by the LED Engine and distributes it into usable even light rays. It generates soft white light that will provide comfort to any illuminated space. The LED arrays are hidden behind a lens that diffuses their brightness without giving up performance. They can be easily maintained and upgraded from the bottom, accommodating the change-out process.

D E

Their versatility and exceptional optical performance make them ideal for retail, hospitality, commercial and medical.

Product Offering

4” & 6” Round 54

4” & 6” Square

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


C

A. OPTICS - Elite LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chips and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. High performance self-flanged cone reflector is available in 5 different finishes and is available in round and square trim apertures that are interchangeable without modifying the housing.

F

B. PERFORMANCE - Utilizes the Phillips Fortimo LED module which is equipped with special Fortimo phosphor technology, enabling a breakthrough in LED efficacy. Operating system consumes only 18 watts of power and puts out more than 950 usable lumens. All Elite LED luminaries are rated at 80+ CRI and 3,000 degrees Kelvin, as rated and tested by an outside laboratory. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

G

C. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chips, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. D. JUNCTION BOX - The Fortimo driver is installed on the junction box cover so it may be serviced from below the ceiling. Thermally protected UL Listed for throughbranch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. E. DIMMABLE LED DRIVER – The LED driver is rated for 50 to 60Hz at 120V and 277V input and has a power factor between 90% and 100%. The Elite LED lighting system is fully dimmable down to 15% initial light output. Please contact Phillips Electronics for additional information.

B

F. MOUNTING BRACKET - Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling. G. MOUNTING FRAME – Die-formed all die-cast construction for maximum heat dissipation and rust protection. Black painted body absorbs stray light rays. H. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location.

A

H

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

55


EX4-led 4” 18w LED round architectural downlight

Architectural

MAXILUME

A

B

D

C A Height = 7-1/8” B Max. Height = 7-3/4”

E

C Cut-out = 4-3/4” D Width = 11-7/8” E Length = 13-1/2” F Cylinder = 10-1/4”

F

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 18W(+/-5%) 18W 9% >0.9

4” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming less 18 watts and producing more than 950 usable lumens. Lighting is smooth and comfortable while using 30% less energy than the common 26W CFL downlight. Plus the ecofriendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star Rating (pending). Features - Greater light output than a 26w CFL while consuming less than 18w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

4 INCH LED a rchitectural D OWN LIGH T

A. OPTICS - Elite LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Utilizes the Phillips Fortimo LED module which is equipped with special Fortimo phosphor technology enabling a breakthrough in LED efficacy.

G. Mounting Bracket – Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling.

B. PERFORMANCE - Operating system consumes only 18 watts of power and puts out more than 950 usable lumens. All Elite LED luminaries are rated at 80+ CRI and tested by an outside laboratory. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

C. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. D. Led Driver/ Junction Box - The LED driver is rated for 50 to 60Hz at 120V and 277V input and has a power factor between 90% and 100%. The Fortimo driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. E. Dimmable – The Elite LED lighting system is fully dimmable down to 15% initial light output. Please contact Phillips Electronics for additional information. F. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. Black painted body absorbs stray light rays.

56

H. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

PENDING

ITEM SELECTOR: (Please check the boxes below for the option desired) driver option voltage type waTTAGE o DIM o BP31 o 18W o 120V EX4-LED

o trim o EX-4101 o EX-4102 o EX-4107 o EX-4115 o EX-4118 o EX-4114 o EX-4113 o EX-4119 o EX-4112

o o o o o o o o o

EX-4109 EX-4110 EX-4111 EX-4125 EX-4121 EX-4122 EX-4127 EX-4123 EX-4124

Dimming

277V baffle oP o WH

C-CHannel

reflector o CL o WT o MB o SHZ oW

color 3000K 4100K

o o

glass blue red green frost

o o o o

Example: EX4-LED-18W-120V-DIM-30K

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

Architectural

4” lED round optics

EX-4102 - baffle w/ reflector

EX-4101 - reflector

EX-4107 - wall wash reflector

REFlector finish: CL, Wt, MB, SHZ, w

baffle finish: wh, p

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh, sch, shz

reflector finish: cl

RING finish: Wh, sch, shz

EX-4115 - reflector w/ tempered clear glass

EX-4118 - reflector w/ tempered clear plastic

EX-4114 - reflector w/ frosted glass lens

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

EX-4113 - baffle w/ tempered clear glass

EX-4119 - baffle w/ tempered clear plastic

EX-4112 - baffle w/ frosted glass lens

baffle finish: wh, p

baffle finish: wh, p

RING finish: Wh

baffle finish: wh, p

RING finish: Wh

RING finish: Wh

EX-4110 - double ring glass

EX-4109 - deco glass reflector

RING finish: Wh, shz

EX-4125 - central etched float glass

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh, shz

RING finish: Wh, shz

glass finish: blue, red, green, frost

glass finish: blue, red, green, frost

EX-4121 - stardust deco ring glass

EX-4122 - euro deco ring glass

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

EX-4127 - geo deco ring glass

EX-4123 - prism deco ring glass

EX-4124 - geo deco ring glass

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

LED a rchitectural D OWN LIGH T

glass finish: blue, red, green, frost

REFlector finish: CL, Wt, MB, SHZ, w

4 INCH

REFlector finish: CL, Wt, MB, SHZ, w

EX-4111 - triple ring glass

57


EX6-led 6” 18w LED round architectural downlight

Architectural

MAXILUME

A

B

D

C A Height = 7-1/8” B Max. Height = 7-3/4” C Cut-out = 6-3/8”

E

D Width = 11-7/8” E Length = 13-1/2” F Cylinder = 10-1/4”

F INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 18W(+/-5%) 18W 9% >0.9

6” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming less 18 watts and producing more than 950 usable lumens. Lighting is smooth and comfortable while using 30% less energy than the common 26W CFL downlight. Plus the ecofriendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star Rating (pending). Features - Greater light output than a 26w CFL while consuming less than 18w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

6 INCH LED a rchitectural D OWN LIGH T

A. OPTICS - Elite LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Utilizes the Phillips Fortimo LED module which is equipped with special Fortimo phosphor technology enabling a breakthrough in LED efficacy.

G. Mounting Bracket – Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling.

B. PERFORMANCE - Operating system consumes only 18 watts of power and puts out more than 950 usable lumens. All Elite LED luminaries are rated at 80+ CRI and tested by an outside laboratory. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

C. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. D. Led Driver/ Junction Box - The LED driver is rated for 50 to 60Hz at 120V and 277V input and has a power factor between 90% and 100%. The Fortimo driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. E. Dimmable – The Elite LED lighting system is fully dimmable down to 15% initial light output. Please contact Phillips Electronics for additional information. F. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. Black painted body absorbs stray light rays.

58

H. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

PENDING

ITEM SELECTOR: (Please check the boxes below for the option desired) driver option voltage type waTTAGE o DIM o BP31 o 18W o 120V EX6-LED

o trim o EX-6101 o EX-6102 o EX-6107 o EX-6115 o EX-6118 o EX-6114 o EX-6113 o EX-6119 o EX-6112

o o o o o o o o o

EX-6109 EX-6110 EX-6111 EX-6125 EX-6121 EX-6122 EX-6127 EX-6123 EX-6124

Dimming

277V baffle oP o WH

color 3000K 4100K

o o

C-CHannel

reflector o CL o WT o MB o SHZ oW

glass blue red green frost

o o o o

Example: EX6-LED-18W-120V-DIM-30K

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

Architectural

6” lED round optics

EX-6102 - baffle w/ reflector

EX-6101 - reflector

EX-6107 - wall wash reflector

REFlector finish: CL, Wt, MB, SHZ, w

baffle finish: wh, p

RING finish: Wh, sch, shz

REFlector finish: CL, Wt, MB, SHZ, w

reflector finish: cl

RING finish: Wh, sch, shz

EX-6115 - reflector w/ tempered clear glass

EX-6118 - reflector w/ tempered clear plastic

EX-6114 - reflector w/ frosted glass lens

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

EX-6113 - baffle w/ tempered clear glass

EX-6119 - baffle w/ tempered clear plastic

EX-6112 - baffle w/ frosted glass lens

baffle finish: wh, p

baffle finish: wh, p

RING finish: Wh

baffle finish: wh, p

RING finish: Wh

RING finish: Wh

EX-6110 - double ring glass

EX-6109 - deco glass reflector

RING finish: Wh, shz

EX-6125 - central etched float glass

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh, shz

RING finish: Wh, shz

glass finish: blue, red, green, frost

glass finish: blue, red, green, frost

EX-6121 - stardust deco ring glass

EX-6122 - euro deco ring glass

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

EX-6127 - geo deco ring glass

EX-6123 - prism deco ring glass

EX-6124 - geo deco ring glass

REFlector finish: CL, Wt, MB, SHZ, w

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

REFlector finish: CL, Wt, MB, SHZ, w

RING finish: Wh

RING finish: Wh

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

LED a rchitectural D OWN LIGH T

glass finish: blue, red, green, frost

REFlector finish: CL, Wt, MB, SHZ, w

6 INCH

REFlector finish: CL, Wt, MB, SHZ, w

EX-6111 - triple ring glass

59


ex4sq-led 4” 18w LED square architectural downlight

MAXILUME

Architectural

A

B

D

C A Height = 7-1/8” B Max. Height = 7-3/4” C Cut-out = 5”

E

D Width = 11-7/8” E Length = 13-1/2” F Cylinder = 10-1/4”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 18W(+/-5%) 18W 9% >0.9

F

4” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming less 18 watts and producing more than 950 usable lumens. Lighting is smooth and comfortable while using 30% less energy than the common 26W CFL downlight. Plus the ecofriendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star Rating (pending). Features - Greater light output than a 26w CFL while consuming less than 18w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

4 INCH LED a rchitectural D OWN LIGH T

A. OPTICS - Elite LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Utilizes the Phillips Fortimo LED module which is equipped with special Fortimo phosphor technology enabling a breakthrough in LED efficacy.

G. Mounting Bracket – Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling.

B. PERFORMANCE - Operating system consumes only 18 watts of power and puts out more than 950 usable lumens. All Elite LED luminaries are rated at 80+ CRI and tested by an outside laboratory. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

C. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. D. Led Driver/ Junction Box - The LED driver is rated for 50 to 60Hz at 120V and 277V input and has a power factor between 90% and 100%. The Fortimo driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. E. Dimmable – The Elite LED lighting system is fully dimmable down to 15% initial light output. Please contact Phillips Electronics for additional information. F. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. Black painted body absorbs stray light rays.

60

H. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

PENDING

ITEM SELECTOR: (Please check the boxes below for the option desired) driver option voltage type waTTAGE o DIM o BP31 o 18W o 120V EX4sq-LED

o trim EX-4601 EX-4607 EX-4614 EX-4615

o o o o

277V

reflector o CL o WT o MB o SHZ oW

Dimming

C-CHannel

color 3000K 4100K

o o

ring o WH

Example: EX4SQ-LED-18W-120V-DIM-30K

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

4” lED square optics

Architectural EX-4601-CL - REFLECTOR REFlector finish: CL

wt

mb

shz

w

RING finish:

A = 3-1/8” B = 5-3/4” C = 4-5/8”

wh

EX-4607-CL - wall wash rEFLECTOR with lens REFlector finish: CL

wt

mb

shz

w

RING finish: wh

A = 3-1/8” B = 5-3/4” C = 4-5/8”

EX-4614-CL - REFLECTOR with frosted glass lens REFlector finish: CL

wt

mb

shz

w

RING finish:

A = 3-1/8” B = 5-3/4” C = 4-5/8” 4 INCH

wh

EX-4615-CL - REFLECTOR with tempered glass lens

CL

wt

mb

shz

w

RING finish: wh

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

A = 3-1/8” B = 5-3/4” C = 4-5/8”

LED a rchitectural D OWN LIGH T

REFlector finish:

61


ex6sq-led 6” 18w LED square architectural downlight

MAXILUME

Architectural

A

B

D

C

A Height = 7-1/8” B Max. Height = 7-3/4”

E

C Cut-out = 6-3/8” D Width = 11-7/8” E Length = 13-1/2” F Cylinder = 10-1/4”

F

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 18W(+/-5%) 18W 9% >0.9

6” LED dedicated Architectural New Construction Downlight with integral LED heat management casting and driver (installed on junction box). Consuming less 18 watts and producing more than 950 usable lumens. Lighting is smooth and comfortable while using 30% less energy than the common 26W CFL downlight. Plus the ecofriendly Maxilume LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star Rating (pending). Features - Greater light output than a 26w CFL while consuming less than 18w of power. Maxilume LED luminaires are ideally suited for use in hospitality, health care, commercial, institutions, retail and other architectural applications.

6 INCH LED a rchitectural D OWN LIGH T 62

A. OPTICS - Elite LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick reflector has been designed to gather the light scattered by the LED chip and shape it into functional beams that minimize brightness and glare, while eliminating lamp image. Utilizes the Phillips Fortimo LED module which is equipped with special Fortimo phosphor technology enabling a breakthrough in LED efficacy.

G. Mounting Bracket – Constructed from 16-gauge steel. Can be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or with optional C-channel mounting bars (Part# BP31) ordered separately. Housing can be adjusted from the inside of the ceiling.

B. PERFORMANCE - Operating system consumes only 18 watts of power and puts out more than 950 usable lumens. All Elite LED luminaries are rated at 80+ CRI and tested by an outside laboratory. All LED luminaries are rated and tested to LM-79 and LM-80 standards by an independent laboratory.

Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

C. THERMAL MANAGEMENT SYSTEM - Using a proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. D. Led Driver/ Junction Box - The LED driver is rated for 50 to 60Hz at 120V and 277V input and has a power factor between 90% and 100%. The Fortimo driver is installed on the junction box cover so it may be serviced from below the ceiling. UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs.

H. LENS - Choice of either clear tempered or tempered frosted lens fastened with two torsion springs. UL listed for wet or damp location.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

PENDING

ITEM SELECTOR: (Please check the boxes below for the option desired) driver option voltage type waTTAGE o DIM o BP31 o 120V EX6sq-LED o 18W

o trim EX-6601 EX-6607 EX-6614 EX-6615

277V

Dimming

reflector o CL o WT o MB o SHZ oW

E. Dimmable – The Elite LED lighting system is fully dimmable down to 15% initial light output. Please contact Phillips Electronics for additional information.

o o o o

F. MOUNTING FRAME - Die-formed all die-cast construction for maximum heat dissipation and rust protection. Black painted body absorbs stray light rays.

Example: EX6SQ-LED-18W-120V-DIM-30K

C-CHannel

color 3000K 4100K

o o

ring o WH

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


MAXILUME

6” lED square optics

Architectural EX-6601-CL - REFLECTOR REFlector finish: CL

wt

mb

shz

w

RING finish:

A = 3-1/8” B = 8” C = 4-5/8”

wh

EX-6607-CL - wall wash rEFLECTOR with lens REFlector finish: CL

wt

mb

shz

w

RING finish: wh

A = 3-1/8” B = 8” C = 4-5/8”

EX-6614-CL - REFLECTOR with frosted glass lens REFlector finish: CL

wt

mb

shz

w

RING finish:

A = 3-1/8” B = 8” C = 4-5/8” 6 INCH

wh

EX-6615-CL - REFLECTOR with tempered glass lens

CL

wt

mb

shz

w

RING finish: wh

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

A = 3-1/8” B = 8” C = 4-5/8”

LED a rchitectural D OWN LIGH T

REFlector finish:

63


ELITE LED LUMINAIRE The Elite LED luminaire are available in: aperture

retrofit

new construction IC/non ic

remodel IC

remodel non-IC

3” 4” 5” 6” • 4”, 5”and 6” retrofit application in existing Elite housing or into existing 4”, 5” and 6” compatible aperture housings

The Elite 6” LED luminaire can deliver over 620 lumens with a superior optical design that yields productive beam lumens, excellent cutoff and low glare. The Elite 6” LED luminaires meets or exceeds; • Energy Star® SSL • California Title 24 – 2008

• International Energy Conservation Code (IECC) • ASTM E283 airflow requirement

Module LED FEATURES

• Exceeds light output and distribution of a 65-watt BR30 incandescent lamp or an 18-watt compact fluorescent luminaire while consuming less than 14 watts of electricity. • Exceeds high efficacy requirements for California Title 24-2008 and IECC-2009. • Dimmable to 15% with most standard dimmers and is capable of dimming to below 5% with select dimmers that have a low end adjustment. • Excellent color rendering index of 80 plus and warm white color temperatures available in 2,700, 3,000, 3,500, 4,100 and 5,000 degrees Kelvin. • Ultraviolet and infrared wavelengths are virtually nonexistent. • Does not emit heat into the primary space like traditional light sources. • No mercury required, thus, no special mercury handling during recycling. • Optical design provides 55° cutoff and low glare. • Product is constructed to operate for 50,000 hours and still produce 70% of initial lumens at that time. • Multiple trim color and reflector color options • Driver power factor of >90 at standard 120v/60Htz input. • The Elite 6” LED retrofit module plugs directly into dedicated LED housings and comes with a standard Edison-based adapter that screws directly into existing sockets for retrofit applications. • 3-year warranty on all module components.

64

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


COLOR, CHROMATICITY, CUT-OFF AND TEMPERATURE (CELSIUS) THERMAL MANAGEMENT Contrary to popular opinion LEDs do produce heat. The heat is produced at the junction location and must be siphoned off. If the heat is allowed to build or runs uncontrolled it will dramatically shorten the life of the LED chips. Elite’s engineering group has designed a heat sink system that removes the heat allowing us to warrant the module for 3 years and achieve an independent life test rating of 50,000 hours.

LIGHT RAYS, CONTROLLED Designing a point source cut-off cone and allowing the cone to reflect the light at low angles was paramount to achieving a specification-grade LED luminaire. The lens was added for full and thorough integration.

CHROMATICITY [kroh-muh-tis-i-tee] –noun Optics. The quality of a color as determined by its dominant wavelength and its purity. The black body locus (represented by the curved line in the center of the graph) represents the Kelvin temperature of a fictitious material that, as it heats will emit visible spectrum radiation of the given color. Thus when we say an incandescent lamp is 2,300 Kelvin, you can see on this diagram that it is a warm reddish orange color. The slightest variation in the chemical make-up of an HID or fluorescent lamp can greatly vary the color yet still have the same color temperature. Look at the 4,000 Kelvin line where it crosses the black body locus line. You can see how one lamp can be very yellow-green and another can be pink, yet both are 4,000 Kelvin. Elite’s quality control process assures a very close match to individual LED chips and a nearly perfect match from luminaire to luminaire. The IESNA’s (Illuminating Engineering Society of North America) LM-79 and LM-80 have been adopted by the DOE’s (Department of Energy) Energy Star program. Elite Lighting’s LED luminaires are tested to these strict government approved standards.

Spectrum

Relative luminuos

120%

I F =720m A

100% 80% 60% 40% 20% 0%

350

450

550 650 750 Wavelength (nm)

850

COLOR If the luminous source does not produce the wavelength the eye will not see it. We have all experienced this in an extreme situation, such as when parking in a parking lot lit with low pressure sodium luminaires. Elite’s quality specifications hold the spectrum requirements of our LED chip sets to be full spectrum light sources. In other words, Elite LED luminaires produce all visible light wavelengths. Elite Lightings eco-friendly LED luminaires have an 85+ CRI.

all products are u.s. and foreign patent pending

www.iuseelite.com • tel: 1-877-375-5555 • fax: 1-877-375-333

65


THE MODULE The Elite LED Retrofit luminaire module is engineered to cool the LED chip set for maximum life and efficient operation. The trim is included with the module; there is nothing else to buy. The Elite module produces 620 lumens. The light is comparable to a 65 watt incandescent BR30. The energy consumed is 75% less than the incandescent. The included trim is lensed for maximum light distribution and 50° cut-off. Retro-Fit – a module housing that is designed to install in most any 6” recessed housing is available.

LED HOUSINGS • Air-Shut™ housings are available for installation in insulation-covered (IC Rated) applications. • Our standard housing can also be used in non-IC applications. • Commercial – a housing for installation on standard T-bar systems is available. • Residential – a housing designed to install on wood joist construction • Remodel – a housing that installs from below into existing ceilings.

led TRIMS Elite Lighting’s standard LED luminaire includes a trim. Options include: soft stippled glass with a white, black, copper or bronze cone or baffle, Fresnel lens with white, black, copper, polished brass or satin nickel trim and holder, just to name a few. The Air-Shut, commercial, residential and remodeler housings can accept virtually all Elite 6 inch trims. Existing opening retrofit – can be used in Elite lighting 6 inch and 5 inch existing housings.

DRIVER – Engineered for thermal environments from –22°F (-30°C) and up to 105°F (40°C), the driver is also dimmable and has an operation life of more than 50,000 hours. UL Classified. WIRING – Uses a simple plug for dedicated LED luminaire, making it Title 24 compliant. For retrofits, an Edison base adapter is installed with a pigtail and the same simple plug. The socket adapter unplugs from the module for ease of installation. Simply screw in the unplugged adapter, plug in the module and install. For dedicated LED luminaires, the module plugs directly into the pre-wired adapter in the housing. LIGHT ENGINE – Proprietary chip set manufactured to Elite specifications for color temperature and color rendering. Engineered for maximum performance without requiring mercury, lead, PCBs or asbestos. HEAT MANAGEMENT – Finned cooling system engineered to maximize cooling and minimize luminaire volume. Our heat sink allows the Elite LED module to install in virtually any 4”, 5” and 6” recessed housing. TRIM – Integral and included with module. Trims provides 50° cut-off and frosted lens. Module include industry leading integral reflector for maximum efficiency. MOUNTING – Module secures in housing using industry standard torsion springs. Designed to eliminate the gap between the trim and the ceiling.

The Elite LED retro-fit installs into most 4”, 5” and 6” recessed housings. Mounting is secured by torsion springs. Electrical connection is made via an incandescent socket adapter. This extremely easy concept allows installation of Elite LED luminaires in most 4”, 5” and 6” incandescent downlight housings. 66

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


new construction and remodel applications

retrofit applications

Elite LED dedicated housings are compliant to California T24 and required for many rebate programs.

LD6IC-AT (page 76)

LD6RIC-AT (page 77)

Edison base screw-in adapter (included with the module)

tool-less installation 1. Remove the bulb from existing housing. Module LED lighting component on pages 68-75

tool-less installation in new construction and remodel applications

2. Remove the trim from existing housing.

3. Remove socket plate from existing housing (if applicable).

1. Install housing into ceiling and connect supply wires in splice box.

2. Once housing is installed in the ceiling and electrical installation has been made, install the Elite Module LED into the housing by connecting the EZ connectors together.

4. Install the Edison socket adapter into the recessed housing socket. For California Title-24 Compliance, cut off and remove the socket and adapter. Then, splice the Module LED leads to the luminaire leads. Simply connect the EZ connectors.

5. Attach existing socket to Module LED housing.

3. Install V-spring in housing and push Module LED up to the ceiling.

available in 4”, 5” and 6” apertures all products are u.s. and foreign patent pending

6. Install V-spring in housing and push Module LED up to the ceiling.

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

67


RL630-14W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component Uniquely engineered for new and existing construction The Elite Module LED has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars. The Module LED can also be installed into most 6-inch incandescent downlights by using our unique Edison adapter. Over 620 usable lumens are directed form the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65w BR30 and 25% less than the common 18w CFL. Plus the Elite Module LED features 50,000 hours life, and California Title-24 compliance.

features Greater light output than a 18w CFL or an 65w BR30 while consuming less than 14w of power. Optics Anyone can mount a chip to a heat sink and make a down light. Gather the light scattered by the LED chip, shape it into a functional beam with a state of the art reflector, integrate the light through a smooth reflector to minimize brightness, then top it all off with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite-engineered, superior quality, Module LED consuming less than 14 watts and producing over 600 lumens. Durability Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite Module LED light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety. In installations requiring 277v, we offer a step-down transformer option that is field installable.

installation 6 INCH RETROFIT LED architec tur al DOW NLI GHT 68

Repeatable Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 3,000 degrees Kelvin, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications to accept only those chips that produce no ultra violet light and with very minimal infrared.

• Socket adapter removes from module, allowing installation to be quick and easy. Simply screw in the adapter and plug in the module. Turning off the entire module is not required. • Utilizes industry standard V or torsion springs, installs in most 6” incandescent down lights. Insert torsion springs into can and press trim to ceiling.

Dimmable The Module LED LED lighting system is dimmable down to 15%. No extra equipment or complicated electronics are required: simply install on a circuit using a standard incandescent wall dimmer. Applications using three or fewer luminaires or require dimming down to 5%, or using more than one dimmer (daylight harvesting, programmed controls) require load compensating dimmers. Interchangeable The Elite Module LED system works in our dedicated (LD6IC-AT, LD6RIC-AT) housings and our existing 6” incandescent housings (or standard B6IC-AT, EZ6IC-AT and B6RIC-AT) but is also suitable for using in most 6-inch recessed downlight housing. Adaptable All Elite Module LED luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 6” downlight housings and most other 6-inch downlight housings.

Certifications • cULus • California Title 24 • IECC

• New York state • Washington state • RoHS

Our Word The Elite Module LED is warranted for 3 years of flawless operation. As a system, we stand behind the entire Elite products from housing to bar hangers. When the Module LED is installed in retrofit applications, only the Module LED itself is warranted.

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


RL630-14W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component dimension

applications typical room

luminaire

foot candle @ workplane

rl630-14w-dim-fl-30k-w-wh 65w br30 White Baffle 18W CFL White Baffle 50W PAR30 White Baffle

16.2 14.3 15.0 17.0

Note: 6’ X 6’ spacing; reflectances = 80/50/20; workplane height = 30”; mounting height = 9’; Nine luminaires minimum

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

photometrics TRIM: rl630-14w-120v-dim-fl-30k

test no.: lli 0809-14

90

Zonal Lumens Summary

60

Zone 0-30 0-40 0-60 0-90

lumens: 620

spacing criteria: .80

Lumens %Lamp 283.83 N.A. 436.89 N.A. 576.56 N.A. 620.12 N.A.

%Fixt 45.8 70.5 93.0 100

Total Luminaire Efficacy = 40 lpw

30

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0% 0%

0 1 2 3 4 5 6 7 8 9 10

119 119 112 108 105 99 98 91 93 84 87 77 82 72 78 67 73 63 70 59 66 55

116 109 102 96 91 85 81 76 72 68 65

111 102 94 87 80 75 69 65 61 57 54

106 98 91 84 78 73 68 64 60 56 53

102 95 88 82 76 71 67 62 59 55 52

100 90 81 74 67 62 57 53 49 46 43

119 119 105 102 94 90 85 80 77 72 71 66 65 60 60 55 56 51 52 48 49 45

RC - Ceiling Cavity Reflectance

116 106 97 89 82 76 71 66 62 58 55

116 103 92 84 76 70 65 60 56 52 49

116 101 89 79 72 65 60 55 51 48 44

111 100 90 82 75 69 64 59 55 51 48

111 97 87 78 71 65 59 55 51 47 44

106 96 87 80 74 68 63 58 55 51 48

106 94 85 77 70 64 59 55 51 47 44

102 93 85 78 72 67 62 58 54 51 47

102 92 83 75 69 63 59 54 50 47 44

RW - Wall Reflectance

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl630

waTTAGE o 14W

voltage o 120

dimmable o dim

optics FL

o

Example: rl630-14W-120-dim-FL-30K-w-wh

color 27K 30K 35K

o o o

o o

40K 50K

finish o w-wh o p-wh o sn-sn

o o o

cp-cp bz-bz p-bk

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl607

waTTAGE o 14W

voltage o 120

dimmable o dim

optics o FL

color o 27K o 30K o 35K

o o

40K 50K

finish o cl-wh o cp-wh o w-wh o bz-bz

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-wh sn-sn rg-pb mb-bk

RETROFIT LED architec tur al DOW NLI GHT

Room Cavity Ratio

20

6 INCH

Candela Tabulation 0 . . . . . . . . . 653 5 . . . . . . . . . 627 15 . . . . . . . . 505 25 . . . . . . . . 354 35 . . . . . . . . 205 45 . . . . . . . . 75 55 . . . . . . . . 23 65 . . . . . . . . 18 75 . . . . . . . . 11 85 . . . . . . . . 4 90 . . . . . . . . 0

Example: rl607-14W-120-dim-FL-30K-w-wh all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

69


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl630-14w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier 1.0

*For non retrofit applications housing must be ordered separately

K rl630-14w-120v-dim-fl-____-p-bk Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with Black Trim Ring Photometric Multiplier .75

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

K rl630-14w-120v-dim-fl-____-sn-sn Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Stepped Baffle with Satin Nickel Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .92

*For non retrofit applications housing must be ordered separately

TRIM: rl630-14w-120v-dim-fl-30k-w-wh test no.: lli 0809-14 lumens: 620 spacing criteria: .80 Zonal Lumens Summary Zone Lumens 283.83 0-300 436.89 0-400 576.56 0-600 620.12 0-900 620.12 0-1800

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 45.8 70.5 93.0 100 100

Total Luminaire Efficacy = 40 lpw

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

5584 2111 2242 2237 2416

5584 2111 2242 2237 2416

Candle Power Distribution (Candelas)

the most up to date photometric data is available online @ WWW.IUSEELITE.com

70

5584 2111 2242 2237 2416


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl630-14w-120v-dim-fl-____-CP-cp Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Copper Stepped Baffle with Copper Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .87

*For non retrofit applications housing must be ordered separately

K rl630-14w-120v-dim-fl-____-bz-bz Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Bronze Stepped Baffle with Bronze Trim Ring Photometric Multiplier .85

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

Photometric Multiplier .75

K rl630-14w-120v-dim-fl-____-p-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with White Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

71


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl607-14w-120v-dim-fl-____-cl-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with White Trim Ring Photometric Multiplier 1.0

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-cl-ch Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with Chrome Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier 1.0

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed White Reflector with White Trim Ring Photometric Multiplier .95

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

TRIM: rl607-14w-120v-dim-nfl-30k-cl-wh test no.: lli 0809-14A4 lumens: 676 spacing criteria: .80 Zonal Lumens Summary Zone Lumens 309.50 0-300 476.25 0-400 628.50 0-600 676.03 0-900 676.03 0-1800

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 45.8 70.4 93.0 100 100

Total Luminaire Efficacy = 48 lpw

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

6105 2294 2491 2441 2416

6105 2294 2491 2441 2416

6105 2294 2491 2441 2416

Candle Power Distribution (Candelas)

the most up to date photometric data is available online @ WWW.IUSEELITE.com

72


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl607-14w-120v-dim-fl-____-sn-sn Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with Satin Nickel Trim Ring Photometric Multiplier .87

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-sn-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with White Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .87

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-rg-pb Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with Polish Brass Trim Ring Photometric Multiplier .90

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

73


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl607-14w-120v-dim-fl-____-cp-cp Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with Copper Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .90

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-bz-bz Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Bronze Reflector with Bronze Trim Ring Photometric Multiplier .87

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

Photometric Multiplier .90

K rl607-14w-120v-dim-fl-____-rg-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with White Trim Ring

74

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately


6â&#x20AC;? led retrofit desingned to fit into existing incandescent downlight

K rl607-14w-120v-dim-fl-____-cp-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with White Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .90

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-mb-bk Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with Black Trim Ring Photometric Multiplier .77

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately

K rl607-14w-120v-dim-fl-____-mb-wh Available Color Temp: (27K) (30K) (35K) (40K) (50K) LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with White Trim Ring

New construction housing:

LD6IC-AT*

Remodel housing:

LD6RIC-AT*

Photometric Multiplier .77

*For non retrofit applications housing must be ordered separately

TRIM: rl607-14w-120v-dim-nfl-30k-cl-wh test no.: lli 0809-14A4 lumens: 676 spacing criteria: .80 Zonal Lumens Summary Zone Lumens 309.50 0-300 476.25 0-400 0 628.50 0-60 0 676.03 0-90 0 676.03 0-180

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 45.8 70.4 93.0 100 100

Total Luminaire Efficacy = 48 lpw

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

6105 2294 2491 2441 2416

6105 2294 2491 2441 2416

6105 2294 2491 2441 2416

Candle Power Distribution (Candelas)

the most up to date photometric data is available online @ WWW.IUSEELITE.com

75


LD6IC-AT 6” New Construction IC Housing for use with RL600 LED series Module LED lighting components

new Cut out: 6-1/2”

to be used with Module LED lighting component on pages 68-75 description 6” IC housing for use with RL600 LED series Module LED trims. Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. The LD6IC-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL600 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD6IC-AT housing and Module LEDs RL600 series trim. RL600 Module LEDs trim must be ordered separately.

specification A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned. C. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • One end of bar hangers hinges 90°, allowing wiring of luminaire while splices are at eye level and below the ceiling line. • Installing pivoting end first allows for easy access to splice box, increasing efficiency of personal. • Bar hanger ends have quick location tab allowing luminaire to be located easily and accurately against the exact bottom of studs each time. • Bar hangers can be modified to fit in 12” joist spans without removal from housing. Simply push in completely and snap off excess ends. • Bar hanger ends are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span.

76

D. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pry-out slots and strain clamps. Designed for straight through conduit runs. E. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. F. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL600 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs. G. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


LD6RIC-AT 6” Remodel IC Housing for use with RL600 LED series Module LED lighting components

new Cut out: 6-1/2”

to be used with Module LED lighting component on pages 68-75 description 6” Remodel IC housing for use with RL600 LED series Module LED trims. Designed for remodel installations and suitable for use in insulation covered or noninsulation covered ceilings. The LD6RIC-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL600 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD6RIC-AT housing and Module LEDs RL600 series trim. RL600 Module LEDs trim must be ordered separately.

specification A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned.

e. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. f. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL600 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs.

C. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”.

g. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements.

d. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

Sample Module LED lighting component from pages 68-75

rl630-14w-120v-dim-fl-30k-w-wh LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring New construction application:

LD6IC-AT*

Remodel application:

LD6RIC-AT*

*For non retrofit applications housing must be ordered separately Photometric Multiplier 1.0

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

77


RL530-12W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component Uniquely engineered for new and existing construction The Elite Module LED has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars. The Module LED can also be installed into most 5-inch incandescent downlights by using our unique Edison adapter. Over 600 usable lumens are directed form the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65w BR30 and 25% less than the common 18w CFL. Plus the Elite Module LED features 50,000 hours life, and California Title-24 compliance.

features Greater light output than a 18w CFL or an 65w BR30 while consuming less than 12w of power. Optics Anyone can mount a chip to a heat sink and make a down light. Gather the light scattered by the LED chip, shape it into a functional beam with a state of the art reflector, integrate the light through a smooth reflector to minimize brightness, then top it all off with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite-engineered, superior quality, Module LED consuming less than 12 watts and producing over 600 lumens.

installation

Durability Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite Module LED light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety. In installations requiring 277v, we offer a step-down transformer option that is field installable.

5 INCH RETROFIT LED architec tur al DOW NLI GHT5 78

Repeatable Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 27K, 30K, 35K, 40K and 51K, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications to accept only those chips that produce no ultra violet light and with very minimal infrared.

• Socket adapter removes from module, allowing installation to be quick and easy. Simply screw in the adapter and plug in the module. Turning off the entire module is not required. • Utilizes industry standard V or torsion springs, installs in most 5” incandescent down lights. Insert torsion springs into can and press trim to ceiling.

Dimmable The Module LED lighting system is dimmable down to 15%. No extra equipment or complicated electronics are required: simply install on a circuit using a standard incandescent wall dimmer. Applications using three or fewer luminaires or require dimming down to 5%, or using more than one dimmer (daylight harvesting, programmed controls) require load compensating dimmers. Interchangeable The Elite Module LED system works in our dedicated (LD5IC-AT, LD5RIC-AT) housings and our existing 5” incandescent housings (or standard B5, B5R, B5IC-AT and B5RIC-AT) but is also suitable for using in most 5-inch recessed downlight housing. Adaptable All Elite Module LED luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 5” downlight housings and most other 5-inch downlight housings.

Certifications • cULus • California Title 24 • IECC

• New York state • Washington state • RoHS

Our Word The Elite Module LED is warranted for 3 years of flawless operation. As a system, we stand behind the entire Elite products from housing to bar hangers. When the Module LED is installed in retrofit applications, only the Module LED itself is warranted.

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


RL530-12W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component dimension

6.375” 5.3”

4.75” 6.56”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 12W(+/-5%) 12W 9% >0.9

photometrics TRIM: rl530-12w-120v-dim-fl-30k

158

test no.: lli 0809-14A

90

Zonal Lumens Summary

60

Zone 0-30 0-40 0-60 0-90

316

lumens: 600

spacing criteria: .80

Lumens %Lamp 274.68 N.A. 422.8 N.A. 557.97 N.A. 600.12 N.A.

%Fixt 45.8 70.5 93.0 100

Total Luminaire Efficacy = 50 lpw 474 30

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

20

RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0% 0%

0 1 2 3 4 5 6 7 8 9 10

119 111 104 97 90 84 78 73 69 65 61

116 109 101 94 88 82 77 72 67 63 60

111 101 92 84 77 70 65 60 55 51 47

106 97 89 81 74 68 63 58 54 50 47

102 94 86 79 72 67 62 57 53 49 46

100 89 79 70 63 56 51 46 42 38 35

119 107 97 88 80 73 67 62 57 53 49

119 104 92 82 73 66 60 54 50 45 42

119 101 87 76 68 60 54 49 44 41 37

RC - Ceiling Cavity Reflectance

116 105 95 87 79 72 66 61 56 52 48

116 102 90 81 72 65 59 54 49 45 42

116 99 86 76 67 60 54 49 44 40 37

111 99 88 79 71 64 58 53 49 45 41

111 96 84 74 66 59 54 48 44 40 37

106 95 85 77 69 63 57 52 48 44 41

106 93 82 73 65 59 53 48 44 40 37

102 92 83 75 68 62 57 52 48 44 40

102 91 81 72 65 58 53 48 44 40 37

RW - Wall Reflectance

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl530

waTTAGE o 12W

voltage o 120

dimmable o dim

optics FL

o

Example: rl530-12W-120-dim-FL-30K-w-wh

color 27K 30K 35K

o o o

o o

40K 51K

finish o w-wh o p-wh o sn-sn

o o o

cp-cp bz-bz p-bk

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl507

waTTAGE o 12W

voltage o 120

dimmable o dim

optics o FL

color o 27K o 30K o 35K

o o

40K 51K

finish o cl-wh o cp-wh o w-wh o bz-bz

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-wh sn-sn rg-pb mb-bk

RETROFIT LED architec tur al DOW NLI GHT

Room Cavity Ratio

632

5 INCH

Candela Tabulation 0 . . . . . . . . . 631.93 5 . . . . . . . . . 606.77 15 . . . . . . . . 488.71 25 . . . . . . . . 342.58 35 . . . . . . . . 198.39 45 . . . . . . . . 72.58 55 . . . . . . . . 22.26 65 . . . . . . . . 17.42 75 . . . . . . . . 10.65 85 . . . . . . . . 3.87 90 . . . . . . . . 0

Example: rl507-12W-120-dim-FL-30K-w-wh all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

79


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring

Photometric Multiplier 1.0

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-SN-sn Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Stepped Baffle with Satin Nickel Trim Ring Photometric Multiplier .92

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-p-bk Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with Black Trim Ring

Photometric Multiplier .75

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

80

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-cp-cp Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Copper Stepped Baffle with Copper Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .87

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-bz-bz Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Bronze Stepped Baffle with Bronze Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .85

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-p-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with White Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .75

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

81


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-CL-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with White Trim Ring

Photometric Multiplier 1.0

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-CL-ch Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with Chrome Trim Ring Photometric Multiplier 1.0

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed White Reflector with White Trim Ring Photometric Multiplier .95

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

82

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-sn-sn Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with Satin Nickel Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .87

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-sn-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with White Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .87

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-rg-pb Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with Polish Brass Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .90

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

83


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-Cp-cp Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with Copper Trim Ring

Photometric Multiplier .90

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-bz-bz Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Bronze Reflector with Bronze Trim Ring Photometric Multiplier .87

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-rg-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with White Trim Ring Photometric Multiplier .90

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

84

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


5” led retrofit desingned to fit into existing incandescent downlight 6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-Cp-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with White Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .90

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-mb-bk Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with Black Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .77

*For non retrofit applications housing must be ordered separately

6.375” 5.3”

4.75” 6.56”

K rl507-12w-120v-dim-fl-____-mb-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with White Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

Photometric Multiplier .77

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

85


LD5IC-AT 5” New Construction IC Housing for use with RL500 LED series Module LED lighting components

new Cut out: 5-3/4”

to be used with Module LED lighting component on pages 78-85 description 5” IC housing for use with RL500 LED series Module LED trims. Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. The LD5IC-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL500 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD5IC-AT housing and Module LEDs RL500 series trim. RL500 Module LEDs trim must be ordered separately.

specification A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned. C. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • One end of bar hangers hinges 90°, allowing wiring of luminaire while splices are at eye level and below the ceiling line. • Installing pivoting end first allows for easy access to splice box, increasing efficiency of personal. • Bar hanger ends have quick location tab allowing luminaire to be located easily and accurately against the exact bottom of studs each time. • Bar hangers can be modified to fit in 12” joist spans without removal from housing. Simply push in completely and snap off excess ends. • Bar hanger ends are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span.

86

D. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pry-out slots and strain clamps. Designed for straight through conduit runs. E. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. F. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL500 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs. G. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


LD5RIC-AT 5” Remodel IC Housing for use with RL500 LED series Module LED lighting components

new Cut out: 5-3/4”

to be used with Module LED lighting component on pages 78-85 description 5” Remodel IC housing for use with RL500 LED series Module LED trims. Designed for remodel installations and suitable for use in insulation covered or noninsulation covered ceilings. The LD5RIC-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL500 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD5RIC-AT housing and Module LEDs RL500 series trim. RL500 Module LEDs trim must be ordered separately.

specification A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned.

e. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. f. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL500 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs.

C. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”.

g. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements.

d. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

Sample Module LED lighting component from pages 78-85 6.375” 5.3”

4.75” 6.56”

K rl530-12w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring

New construction housing:

LD5IC-AT*

Remodel housing:

LD5RIC-AT*

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

Photometric Multiplier 1.0

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

87


RL430-10W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component Uniquely engineered for new and existing construction The Elite Module LED has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars. The Module LED can also be installed into most 5-inch incandescent downlights by using our unique Edison adapter. Over 500 usable lumens are directed form the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 50w BR20 and 25% less than the common 13w CFL. Plus the Elite Module LED features 50,000 hours life, and California Title-24 compliance.

features Greater light output than a 13w CFL or an 50w BR20 while consuming less than 10w of power. Optics Anyone can mount a chip to a heat sink and make a down light. Gather the light scattered by the LED chip, shape it into a functional beam with a state of the art reflector, integrate the light through a smooth reflector to minimize brightness, then top it all off with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite-engineered, superior quality, Module LED consuming less than 10 watts and producing over 500 lumens.

installation

Durability Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite Module LED light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety. In installations requiring 277v, we offer a step-down transformer option that is field installable.

4 INCH RETROFIT LED architec tur al DOW NLI GHT 88

Repeatable Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 27K, 30K, 35K, 40K and 51K, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications to accept only those chips that produce no ultra violet light and with very minimal infrared.

• Socket adapter removes from module, allowing installation to be quick and easy. Simply screw in the adapter and plug in the module. Turning off the entire module is not required. • Utilizes industry standard V or torsion springs, installs in most 4” incandescent down lights. Insert torsion springs into can and press trim to ceiling.

Dimmable The Module LED lighting system is dimmable down to 15%. No extra equipment or complicated electronics are required: simply install on a circuit using a standard incandescent wall dimmer. Applications using three or fewer luminaires or require dimming down to 5%, or using more than one dimmer (daylight harvesting, programmed controls) require load compensating dimmers. Interchangeable The Elite Module LED system works in our dedicated (LD4IC-AT, LD4-AT, LD4R-AT) housings and our existing 4” incandescent housings (or standard B4IC-AT, B4-AT and B4R-AT) but is also suitable for using in most 4-inch recessed downlight housing. Adaptable All Elite Module LED luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 4” downlight housings and most other 4-inch downlight housings.

Certifications • cULus • California Title 24 • IECC

• New York state • Washington state • RoHS

Our Word The Elite Module LED is warranted for 3 years of flawless operation. As a system, we stand behind the entire Elite products from housing to bar hangers. When the Module LED is installed in retrofit applications, only the Module LED itself is warranted.

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


RL430-10W-120V-dim-fl-30k Module LED - Elite Lighting Module LED Lighting Component dimension 5” 3.75”

4” 5”

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 10W(+/-5%) 10W 9% >0.9

photometrics TRIM: rl430-10w-120v-dim-fl-30k

132

test no.: lli 0809-14A

90

Zonal Lumens Summary

60

Zone 0-30 0-40 0-60 0-90

263

lumens: 500

Lumens 228.9 352.33 464.96 500.09

spacing criteria: .80

%Lamp 45.8 70.5 93 100

%Fixt 45.8 70.5 93.0 100

Total Luminaire Efficiency = 100% 395 30

Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20

20

RC RW

80% 70% 50% 30% 10%

70% 70% 50% 30% 10%

50% 50% 30% 10%

30% 50% 30% 10%

10% 50% 30% 10%

0% 0%

0 1 2 3 4 5 6 7 8 9 10

119 111 104 97 90 84 78 73 69 65 61

116 109 101 94 88 82 77 72 67 63 60

111 101 92 84 77 70 65 60 55 51 47

106 97 89 81 74 68 63 58 54 50 47

102 94 86 79 72 67 62 57 53 49 46

100 89 79 70 63 56 51 46 42 38 35

119 107 97 88 80 73 67 62 57 53 49

119 104 92 82 73 66 60 54 50 45 42

119 101 87 76 68 60 54 49 44 41 37

RC - Ceiling Cavity Reflectance

116 105 95 87 79 72 66 61 56 52 48

116 102 90 81 72 65 59 54 49 45 42

116 99 86 76 67 60 54 49 44 40 37

111 99 88 79 71 64 58 53 49 45 41

111 96 84 74 66 59 54 48 44 40 37

106 95 85 77 69 63 57 52 48 44 41

106 93 82 73 65 59 53 48 44 40 37

102 92 83 75 68 62 57 52 48 44 40

102 91 81 72 65 58 53 48 44 40 37

RW - Wall Reflectance

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl430

waTTAGE o 10W

voltage o 120

dimmable o dim

optics FL

o

Example: rl430-10W-120-dim-FL-30K-w-wh

color 27K 30K 35K

o o o

o o

40K 51K

finish o w-wh o p-wh o sn-sn

o o o

cp-cp bz-bz p-bk

ITEM SELECTOR: (Please check the boxes below for the option desired) type rl407

waTTAGE o 10W

voltage o 120

dimmable o dim

optics o FL

color o 27K o 30K o 35K

o o

40K 51K

finish o cl-wh o cp-wh o w-wh o bz-bz

o o o o

rg-wh mb-wh cl-ch cp-cp

o o o o

sn-wh sn-sn rg-pb mb-bk

RETROFIT LED architec tur al DOW NLI GHT

Room Cavity Ratio

527

4 INCH

Candela Tabulation 0 . . . . . . . . . 526.61 5 . . . . . . . . . 505.64 15 . . . . . . . . 407.26 25 . . . . . . . . 285.48 35 . . . . . . . . 165.32 45 . . . . . . . . 60.48 55 . . . . . . . . 18.55 65 . . . . . . . . 14.52 75 . . . . . . . . 8.87 85 . . . . . . . . 3.23 90 . . . . . . . . 0

Example: rl407-10W-120-dim-FL-30K-w-wh all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

89


4” led retrofit desingned to fit into existing incandescent downlight

5”

5”

3.75”

4” 5”

3.75”

4” 5”

K rl430-10w-120v-dim-fl-____-w-wh

4” 5”

K rl430-10w-120v-dim-fl-____-p-wh

K rl430-10w-120v-dim-fl-____-SN-sn

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with White Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Stepped Baffle with Satin Nickel Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

90

5”

3.75”

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


4” led retrofit desingned to fit into existing incandescent downlight

5”

5”

3.75”

5”

3.75”

4” 5”

3.75”

4” 5”

K rl430-10w-120v-dim-fl-____-cp-cp

4” 5”

K rl430-10w-120v-dim-fl-____-p-bk

K rl430-10w-120v-dim-fl-____-bz-bz

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed Copper Stepped Baffle with Copper Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Black Stepped Baffle with Black Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Bronze Stepped Baffle with Bronze Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

rl407 series (reflector)

5” 3.75”

4” 5”

K rl407-10w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K) LED (Retrofit) Die-cast Aluminum Lensed White Reflector with White Trim Ring

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

91


4” led retrofit desingned to fit into existing incandescent downlight

5”

5”

3.75”

4” 5”

3.75”

4” 5”

K rl407-10w-120v-dim-fl-____-cl-wh

4” 5”

K rl407-10w-120v-dim-fl-____-cp-wh

K rl407-10w-120v-dim-fl-____-SN-wh

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with White Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with White Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with White Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

5”

5”

3.75”

5”

3.75”

4” 5”

3.75”

4” 5”

K rl407-10w-120v-dim-fl-____-cl-ch

4” 5”

K rl407-10w-120v-dim-fl-____-cp-cp

K rl407-10w-120v-dim-fl-____-sn-sn

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with Chrome Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Copper Reflector with Copper Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Satin Nickel Reflector with Satin Nickel Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

92

5”

3.75”

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


4” led retrofit desingned to fit into existing incandescent downlight

5”

5”

3.75”

5”

3.75”

4” 5”

3.75”

4” 5”

K rl407-10w-120v-dim-fl-____-cl-sn

4” 5”

K rl407-10w-120v-dim-fl-____-rg-pb

K rl407-10w-120v-dim-fl-____-rg-wh

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed Chrome Reflector with Satin Nickel Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with Polish Brass Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Gold Reflector with White Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

5”

5”

3.75”

5”

3.75”

4” 5”

3.75”

4” 5”

4” 5”

K K rl407-10w-120v-dim-fl-____-mb-wh rl407-10w-120v-dim-fl-____-mb-bk

K rl407-10w-120v-dim-fl-____-bz-bz

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Available Color Temp: (27K) (30K) (35K) (40K) (51K)

LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with White Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Black Reflector with Black Trim Ring

LED (Retrofit) Die-cast Aluminum Lensed Bronze Reflector with Bronze Trim Ring

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

all products are u.s. and foreign patent pending

*For non retrofit applications housing must be ordered separately

*For non retrofit applications housing must be ordered separately

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

93


LD4IC-AT 4” New Construction IC Housing for use with RL400 LED series Module LED lighting components

new

5-1/2” (140mm) 5-1/2” (140mm)

Cut out: 4-3/8” 12”-24” (305mm-610mm)

8” (204mm)

to be used with Module LED lighting component on pages 88-93 description 4” IC housing for use with RL400 LED series Module LED trims. Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. The LD4IC-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL400 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD4IC-AT housing and Module LEDs RL400 series trim. RL400 Module LEDs trim must be ordered separately.

specification A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned. C. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • One end of bar hangers hinges 90°, allowing wiring of luminaire while splices are at eye level and below the ceiling line. • Installing pivoting end first allows for easy access to splice box, increasing efficiency of personal. • Bar hanger ends have quick location tab allowing luminaire to be located easily and accurately against the exact bottom of studs each time. • Bar hangers can be modified to fit in 12” joist spans without removal from housing. Simply push in completely and snap off excess ends. • Bar hanger ends are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial T-bars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span.

94

D. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pry-out slots and strain clamps. Designed for straight through conduit runs. E. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. F. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL400 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs. G. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


LD4 4” New Construction Housing for use with RL400 LED series Module LED lighting components

5-1/2” (140mm)

12”-24” (305mm-610mm)

8” (204mm)

new

5-1/2” (140mm)

Cut out: 4-3/8”

to be used with Module LED lighting component on pages 88-93 description 4” New construction Non-IC housing for use with RL400 LED series Module LED trims. Designed for new construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The LD4 housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL400 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD4-AT housing and Module LEDs RL400 series trim. RL400 Module LEDs trim must be ordered separately.

specification A. Housing – High-temperature painted 22-gauge deep drawn single piece housing. Adjusts vertically in plaster frame to accommodate 1-1/2” to 1-3/8” ceiling.

T-bars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span.

B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned. Instlation – Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”.

d. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps.

C. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • One end of bar hangers hinges 90°, allowing wiring of luminaire while splices are at eye level and below the ceiling line. • Installing pivoting end first allows for easy access to splice box, increasing efficiency of personal. • Bar hanger ends have quick location tab allowing luminaire to be located easily and accurately against the exact bottom of studs each time. • Bar hangers can be modified to fit in 12” joist spans without removal from housing. Simply push in completely and snap off excess ends. • Bar hanger ends are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial

e. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. f. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL400 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs. g. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

K rl430-10w-120v-dim-fl-____-w-wh Available Color Temp: (27K) (30K) (35K) (40K) (51K)

Sample Module LED lighting component from pages 88-93

LED (Retrofit) Die-cast Aluminum Lensed White Stepped Baffle with White Trim Ring

5” 3.75”

4” 5”

all products are u.s. and foreign patent pending

New construction housing:

LD4IC-AT*

Non-IC housing:

LD4-AT*

Remodel Non-IC housing:

LD4R-AT*

*For non retrofit applications housing must be ordered separately

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

95


LD4r-AT 4” Remodel Housing for use with RL400 LED series Module LED lighting components

new

5-1/2” (140mm) 11” (279mm)

Cut out: 4-3/8”

to be used with Module LED lighting component on pages 88-93 description 4” Remodel housing for use with RL400 LED series Module LED trims. Designed for remodel installations and suitable for use in non-insulation covered ceilings or where insulation can be kept 3” from housing. The LD4R-AT housing is engineered with a unique ‘EZ-connect’ wiring system, that when used with the RL400 trim, is Title 24-2008 compliant. The unique EZ-connect system also meets other state and national regulatory mandates. Module LED connects effortlessly to housing, virtually eliminating mis-wiring and potential shock hazards. NOTE – Complete system includes LD4R-AT housing and Module LEDs RL400 series trim. RL400 Module LEDs trim must be ordered separately.

specification A. Housing – High-temperature painted 22-gauge deep drawn single piece housing.

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

B. Connection – Polarity-specific EZ-connect system engineered to match with Elite Module LED trims. *Meets strict code requirements where Edison Base Sockets have been banned. C. installation – Four preinstalled spring clips which secure the housing firmly into ceiling to accommodate different ceiling thicknesses from 1/2” to 1-3/8”. D. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pry-out slots and strain clamps. Designed for straight through conduit runs. E. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. F. Elite Module LED sold separately. Module LEDs unique ‘EZ-connect’ wiring system is Title 24-2008 compliant when used with the RL400 trim. The unique EZ-connect system also meets other state and national regulatory mandates. System is a UL Listed disconnect system that preserves the integrity of the energy-efficient system by insuring only Elite brand trims are used. The EZ-connect system prevents installation of less efficient incandescent luminaires and LEDs. G. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements.

96

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

97


The green-friendly Elite Lighting LED housing installs easily. The intregal LED chip design utilizes a PAR30 emulating reflector giving the B6IC-LED-14W the look and feel of incandescent lighting.

all products are u.s. and foreign patent pending


HOUSINGS • Air-Shut™ housings are available for installation in insulation-covered (IC Rated) applications. • Our standard housing can also be used in non-IC applications. • Commercial – Housing for installation on standard T-bar systems is available. • Residential – Housing designed to install on wood joist construction

TRIMS Elite Lighting’s standard LED luminaire includes a trim. Among the trim color options are: white, black, copper, bronze and satin nickel architectural low glare baffle or architectural flood reflector with clear anodized (chrome), satin haze, white, black, copper and satin nickel with a variety of trim ring color options. The Air-Shut, commercial, residential and remodeler housings can accept virtually all Elite 6-inch trims. Existing opening retrofit – can be used in Elite lighting 6 inch and other existing housings.

DRIVER – Engineered for thermal environments from –22°F (-30°C) and up to 105°F (40°C), the driver is also dimmable and has an operation life of more than 50,000 hours, and is UL Classified.

WIRING – Connects the supply leads in the junction box. No additional wiring is required.

LIGHT ENGINE – Proprietary chip set manufactured to Elite specifications for color temperature and color rendering. Engineered for maximum performance without requiring mercury, lead, PCBs or asbestos. HEAT MANAGEMENT – Finned cooling system engineered to maximize cooling and minimize luminaire volume. Our heat sink design allows IC-rated housing to be in contact with insulation. lens – Computer-designed optics efficiently gathers the light for maximum efficiency while controlling glare. Integration lens diffuses glare and contributes to the look of an incandescent lamp. MOUNTING – All 3”, 4”, 5” and 6” eco-friendly luminaires install in dry wall ceilings and grid ceilings without additional clips or hardware. • Double headed nail is securely positioned 20° down in a hammer swing position. One end of bar hangers hinges 90°, and allows easy access to splice box. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial T-bars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-333

99


B6IC-LED-14W-120V-DIM-FL-30K-AT 6” New Construction IC Housing for use with L600 LED series trims

new

7” (178mm)

7-1/4” (184mm)

6-1/2” (165mm)

10” (254mm) 12”-25” (305mm-610mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

6” LED dedicated New Construction IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features - Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 3,000 degrees Kelvin, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers. A. Housing – Die-formed aluminum and galvanized steel for maximum heat 100

dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Bar Hangers – • Double headed nail is securely positioned 20° down in a hammer swing position. One end of bar hangers hinges 90°, and allows easy access to splice box. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage driver optics color o 120V o DIM-Dimming o FL-Flood(Standard) o 27K B6IC-LED o 14W o 277V optic accessories o 30K o BP6LED-SP-Spot o 35K o BP6LED-PE-Par emulator o 40K o 50K

air-shut AT

Example: B6IC-LED-14W-120V-DIM-FL-30K-AT

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


B6rIC-LED-14W-120V-DIM-FL-30K-AT 6” Remodel IC Housing for use with L600 LED series trims

new 7-1/4” (184mm) 13” (330mm) 6-1/2” (165mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

6” Remodel LED dedicated IC housing with integral LED heat management casting and driver (installed on junction box). Designed for remodel installations and is suitable for use insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus, the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 3,000 degrees Kelvin, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers. all products are u.s. and foreign patent pending

A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”. C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut– Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage o 120V B6RIC-LED o 14W o 277V

optics color driver o DIM-Dimming o FL-Flood(Standard) o 27K optic accessories o 30K o BP6LED-SP-Spot o 35K o BP6LED-PE-Par emulator o 40K o 50K

air-shut AT

Example: B6RIC-LED-14W-120V-DIM-FL-30K-AT

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

101


6” led L600 BAFFLE trims l631w-wh - Phenolic Stepped Baffle baffle finish : w-White (Ordering information) l631w- xx ring finish : 2-5/8”

BK

WH

CH

L631w-bK

L631w-WH L631w-ch

PB

SN

CP

BZ

L631w-PB

L631w-SN L631w-CP

7-3/4”

Photometric Multiplier 1.0

L631w-BZ

l631p-bk - Phenolic Stepped Baffle baffle finish : p-black (Ordering information) l631p- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ 7-3/4”

L631p-bK

L631p-WH

L631p-ch

L631p-PB

L631p-SN

L631p-CP

L631p-BZ

Photometric Multiplier .75

l631sn-sn - Metal Stepped Baffle baffle finish : sn-satin nickel (Ordering information) l631sn- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ 7-3/4”

L631sn-bK

Photometric Multiplier .92

L631sn-WH L631sn-ch L631sn-PB L631sn-SN L631sn-CP L631sn-BZ

l631cp-cp - Metal Stepped Baffle baffle finish : cp-copper (Ordering information) l631cp- xx ring finish : CH

PB

SN

CP

2-5/8”

BK

WH

BZ

L631cp-bK

L631cp-WH L631cp-ch L631cp-PB L631cp-SN L631cp-CP L631cp-BZ

7-3/4”

Photometric Multiplier .87

l631bz-bz - Metal Stepped Baffle baffle finish : bz-bronze (Ordering information) l631bz- xx ring finish : CH

PB

SN

CP

2-5/8”

BK

WH

BZ

L631bz-bK

L631bz-WH L631bz-ch L631bz-PB L631bz-SN L631bz-CP L631bz-BZ

7-3/4”

Photometric Multiplier .85

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l631w-wh test no.: lli 0809-14A1 lumens: 603 spacing criteria: .26

Zonal Lumens Summary Zone Lumens 349.13 0-300 474.81 0-400 570.35 0-600 603.86 0-900 603.86 0-1800

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 43 lpw

102

%Fixt 57.8 78.6 94.5 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


l611w-wh - Baffle Wall Wash (Ordering information) l611X- xx BAFFLE finish : BZ

cp

SN

WH

P

ring finish :

7-3/4”

WH all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

103


6” led L600 REFLECTOR trims l607CL-wh - Reflector reflector finish : cl-clear (Ordering information) l607cl- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ

L607cl-bK

L607cl-WH L607cl-ch L607cl-PB L607cl-SN L607cl-CP L607cl-BZ

7-3/4”

Photometric Multiplier 1.0

l607mb-wh - Reflector reflector finish : mb-black (Ordering information) l607mb- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ 7-3/4”

L607mb-bK L607mb-WH L607mb-ch L607mb-PB L607mb-SN L607mb-CP L607mb-BZ

Photometric Multiplier .77

l607rg-wh - Reflector reflector finish : rg-gold (Ordering information) l607rg- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ

L607rg-bK

L607rg-WH L607rg-ch L607rg-PB L607rg-SN L607rg-CP L607rg-BZ

7-3/4”

Photometric Multiplier .90

l607w-wh - Reflector reflector finish : w-white (Ordering information) l607w- xx ring finish : 2-5/8”

BK

WH

CH

PB

SN

CP

BZ 7-3/4”

L607w-bK

Photometric Multiplier .95

L607w-WH L607w-ch

L607w-PB

L607w-SN L607w-CP

L607w-BZ

l607Cp-cp - Reflector reflector finish : cp-copper (Ordering information) l607cp- xx ring finish : BK

WH

2-5/8”

CH

PB

SN

CP

BZ 7-3/4”

Photometric Multiplier .90

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l607cl-wh test no.: lli 0809-14A3 lumens: 674 spacing criteria: .26

L607cp-bK Zonal Lumens Summary Zone Lumens 365.23 0-300 506.79 0-400 624.58 0-600 674.44 0-900 674.44 0-1800

L607cp-WH L607cp-ch L607cp-PB L607cp-SN L607cp-CP L607cp-BZ Luminance Data (cd/sq.m)

%Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 48 lpw

%Fixt 54.2 75.1 92.6 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com

104

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


6” led L600 REFLECTOR trims l607sn-sn - Reflector reflector finish : sn-satin nickel (Ordering information) l607sn- xx ring finish : BK

WH

2-5/8”

CH

PB

SN

CP

BZ 7-3/4”

Photometric Multiplier .87

L607sn-bK

L607sn-WH L607sn-ch L607sn-PB L607sn-SN L607sn-CP L607sn-BZ

l607bz-bz - Reflector reflector finish : bz-bronze (Ordering information) l607bz- xx ring finish : BK

WH

2-5/8”

CH

PB

SN

CP

BZ 7-3/4”

Photometric Multiplier .87

l607SHZ-WH - Reflector

L607bz-bK

L607bz-WH L607bz-ch L607bz-PB L607bz-SN L607bz-CP L607bz-BZ

reflector finish : sHZ-satin HAZE (Ordering information) l607sHZ- xx ring finish : BK

WH

2-5/8”

CH

PB

SN

CP

BZ 7-3/4”

L607sn-bK

all products are u.s. and foreign patent pending

L607sn-WH L607sn-ch L607sn-PB L607sn-SN L607sn-CP L607sn-BZ

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

105


6” led L600 LENSED BAFFLE trims l656w-wh - Baffle with Frosted Dome Shower Lens (Ordering information) l656X- xx BAFFLE finish : BZ

cp

SN

WH

P

ring finish : Photometric Multiplier .85

BK

WH

7-3/4”

CH

PB

SN

CP

BZ

l676w-wh - Baffle with Frosted Lens (Ordering information) l676X- xx BAFFLE finish : BZ

cp

SN

WH

P 7-3/4”

ring finish : Photometric Multiplier .85

BK

WH

CH

PB

SN

CP

BZ

l675w-wh - Baffle with Prismatic Lens (Ordering information) l675X- xx BAFFLE finish : BZ

cp

SN

WH

P 7-3/4”

ring finish : Photometric Multiplier .85

BK

WH

CH

PB

SN

CP

BZ

l635W-wh - Baffle with Albalite Lens (Ordering information) l635X- xx BAFFLE finish : BZ

cp

SN

WH

P 7-3/4”

ring finish : Photometric Multiplier .85

BK

WH

CH

PB

SN

CP

BZ

l636w-wh - Baffle with Fresnel Lens (Ordering information) l636X- xx BAFFLE finish : BZ

cp

SN

WH

P

ring finish : Photometric Multiplier .85

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l631w-wh test no.: lli 0809-14A1 lumens: 603 spacing criteria: .26

BK Zonal Lumens Summary Zone Lumens 349.13 0-300 474.81 0-400 0 570.35 0-60 0 603.86 0-90 0 603.86 0-180

WH

7-3/4”

CH

PB

SN

CP

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 43 lpw

%Fixt 57.8 78.6 94.5 100 100

BZ Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com

106

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


6” led L600 LENSED REFLECTOR trims l657cl-wh - Reflector with Frosted Dome Shower Lens (Ordering information) l657X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W

ring finish : Photometric Multiplier .87

BK

7-3/4”

WH

CH

PB

SN

CP

BZ

l659cl-wh - Reflector with Frosted Lens (Ordering information) l659X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W 7-3/4”

ring finish : Photometric Multiplier .87

BK

WH

CH

PB

SN

CP

BZ

l658cl-wh - Reflector with Prismatic Lens (Ordering information) l658X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W 7-3/4”

ring finish : Photometric Multiplier .87

BK

WH

CH

PB

SN

CP

BZ

l641cl-wh - Reflector with Albalite Lens (Ordering information) l641X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W 7-3/4”

ring finish : Photometric Multiplier .87

BK

WH

CH

PB

SN

CP

BZ

l642cl-wh - Reflector with Fresnel Lens (Ordering information) l642X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W

ring finish : Photometric Multiplier .87

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l607cl-wh test no.: lli 0809-14A3 lumens: 674 spacing criteria: .26

BK Zonal Lumens Summary Zone Lumens 365.23 0-300 506.79 0-400 0 624.58 0-60 0 674.44 0-90 0 674.44 0-180

7-3/4”

WH

CH

PB

SN

CP

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 48 lpw

%Fixt 54.2 75.1 92.6 100 100

BZ Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

107


6” led L600 LENSED trims L652wh - Smooth Frosted Lens lens finish : frosted (Ordering information) L652xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L652bK

L652WH

L652ch

L652PB

L652SN

L652CP

L652BZ

7-3/4”

L612wh - Smooth Frosted Dome Lens lens finish : frosted (Ordering information) L612xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L612bK

L612WH

L612ch

L612PB

L612SN

L612CP

L612BZ

7-3/4”

L645wh - Designer Point Lens lens finish : frosted (Ordering information) L645xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L645bK

L645WH

L645ch

L645PB

L645SN

L645CP

L645BZ

7-3/4”

L648wh - Designer Cone Lens lens finish : frosted (Ordering information) L648xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L648bK

L648WH

L648ch

L648PB

L648SN

L648CP

L648BZ

7-3/4”

L601WH/L601L - Metal/Plastic Albalite Lens lens finish : albalite-white (Ordering information) L601xx ring finish :

108

BK

WH

CH

PB

SN

CP

BZ

L601bK

L601WH L601L

L601ch

L601PB

L601SN

L601CP

L601BZ

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

7-3/4”

all products are u.s. and foreign patent pending


6” led L600 LENSED trims L605WH/L605l - Metal/Plastic Fresnel Lens lens finish : fresnel-clear (Ordering information) L605xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L605bK

L605WH L605L

L605ch

L605PB

L605SN

L605CP

L605BZ

7-3/4”

L606wh/L606L - Metal/Plastic Drop Opal Lens lens finish : drop opal-frosted (Ordering information) L606xx ring finish :

all products are u.s. and foreign patent pending

BK

WH

CH

PB

SN

CP

BZ

L606bK

L606WH L606L

L606ch

L606PB

L606SN

L606CP

L606BZ

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

7-3/4”

109


6” led L600 SQUARE OPEN trims l681bz-wh - Square Baffle (Ordering information) l681xx- xx BAFFLE finish : 2-5/8”

BZ

cp

SN

WH

P 7-3/4”

ring finish : BK

WH

CH

PB

SN

CP

BZ

Photometric Multiplier .87

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l631w-wh test no.: lli 0809-14A1 lumens: 603 spacing criteria: .26

Zonal Lumens Summary Zone Lumens 349.13 0-300 474.81 0-400 0 570.35 0-60 0 603.86 0-90 0 603.86 0-180

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 57.8 78.6 94.5 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

Total Luminaire Efficacy = 43 lpw

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

3648 1927 1495 1627 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com

l687cl-wh - Square Reflector (Ordering information) l687xx- xx REFLECTOR finish : CL

CP

2-5/8”

MB

RG

SN

W

CH

PB

SN

CP

7-3/4”

ring finish :

Photometric Multiplier 1.0

B6IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l607cl-wh test no.: lli 0809-14A3 lumens: 674 spacing criteria: .26

BK

Zonal Lumens Summary Zone Lumens 365.23 0-300 506.79 0-400 624.58 0-600 674.44 0-900 674.44 0-1800

WH

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 48 lpw

%Fixt 54.2 75.1 92.6 100 100

BZ

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

4467 2937 2367 2441 2416

the most up to date photometric data is available online @ WWW.IUSEELITE.com

110

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


6” led L600 SQUARE LENSED trims l688wh - Square Albalite Lens lens finish : albalite-white (Ordering information) l688-xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L688bK

L688WH

L688ch

L688PB

L688SN

L688CP

L688BZ

7-3/4”

l685wh - Square Fresnel Lens lens finish : fresnel-clear (Ordering information) l685-xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L685bK

L685WH

L685ch

L685PB

L685SN

L685CP

L685BZ

7-3/4”

l680wh - Square Designer Point Lens lens finish : frosted (Ordering information) l680xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L680bK

L680WH

L680ch

L680PB

L680SN

L680CP

L680BZ

7-3/4”

l689wh - Square Designer Cone Lens lens finish : frosted/clear (Ordering information) l689xx ring finish : BK

WH

CH

PB

SN

CP

BZ

L689bK

L689WH

L689ch

L689PB

L689SN

L689CP

L689BZ

7-3/4”

l696wh - Square Designer Frosted Lens lens finish : frosted (Ordering information) l696xx ring finish :

all products are u.s. and foreign patent pending

BK

WH

CH

PB

SN

CP

BZ

L696bK

L696WH

L696ch

L696PB

L696SN

L696CP

L696BZ

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

7-3/4”

111


B26IC-LED-14W-120V-DIM-FL-30K-AT 6” New Construction Shallow IC Housing for use with L600 LED series trims

new

7” (178mm)

5” (127mm)

6-1/2” (165mm)

10” (254mm) 12”-25” (305mm-610mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

6” LED dedicated Shallow New Construction IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 6” joist construction. B. Bar Hangers – • Double headed nail is securely positioned 20° down in a hammer swing position. One end of bar hangers hinges 90°, and allows easy access to splice box. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial T-bars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage driver optics o 120V o DIM-Dimming o FL-Flood(Standard) B26IC-LED o 14W o 277V optic accessories o BP6LED-SP-Spot

color o 27K o 30K o 35K o 40K o 50K

air-shut AT

Example: B6IC-LED-14W-120V-DIM-FL-30K-AT

112

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


B26rIC-LED-14W-120V-DIM-FL-30K-AT 6” Remodel Shallow IC Housing for use with L600 LED series trims

new 5” (127mm) 13” (330mm) 6-1/2” (165mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

6” Remodel LED dedicated Shallow IC housing with integral LED heat management casting and driver (installed on junction box). Designed for remodel installations and is suitable for use insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus, the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood • Par emulator Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

all products are u.s. and foreign patent pending

A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 6” joist construction. B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”. C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut– Provided with gasket to prevent airflow from heated or air conditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage driver optics o 120V o DIM-Dimming o FL-Flood(Standard) B26RIC-LED o 14W o 277V optic accessories o BP6LED-SP-Spot

color air-shut o 27K AT o 30K o 35K o 40K o 50K

Example: B6RIC-LED-14W-120V-DIM-FL-30K-AT

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

113


6” led trims FOR B26IC-LED AND B26RIC-LED HOUSINGS l661w-wh - Phenolic Stepped Baffle (Ordering information) l661X- xx BAFFLE finish : BZ

cp

SN

WH

CH

PB

P

ring finish : BK

WH

SN

CP

BZ

l617cl-wh - Reflector (Ordering information) l617X- xx REFLECTOR finish : CL

CP

MB

RG

SN

W

SHZ

ring finish : BK l601wh/l601l - metal/plastic albalite lens

CH

PB

l645wh - designer point lens

SN

CP

BZ

l652wh - smooth frosted lens

lens finish: albalite - white

lens finish: designer point

lens finish: smooth frosted

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l612wh - smooth frosted dome lens

6 INCH LED a rchitectural D OWN LIGH T trims 114

WH

l605wh/l605l - metal/plastic fresnel lens

l606wh/l606l - metal/plastic drop opal lens

lens finish: smooth frosted

lens finish: fresnel - clear

lens finish: drop opal - frosted

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l687cl-wh - square reflector

l688wh - square albalite lens

l685wh - square fresnel lens

REFlector finish: cl, mb, rg, w, cp, sn

lens finish: albalite - white

lens finish: fresnel - clear

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

l681bz-wh - square baffle

l680wh - square designer point lens

l696wh - square designer frosted lens

baffle finish: bz, cp, sn, wh, p

lens finish: frosted

lens finish: frosted

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

ring finish: bk, wh, ch, pb, sn, cp, bz

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


6” led trims FOR B26IC-LED AND B26RIC-LED HOUSINGS

6 INCH LED a rchitectural D OWN LIGH T trims

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

115


B5IC-LED-14W-120V-DIM-FL-30K-AT 5” New Construction IC Housing for use with L500 LED series trims

new 7” (178mm)

7” (178mm)

5-3/4” (144mm)

10” (254mm) 12”-25” (305mm-610mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

5” LED dedicated IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features - Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial T-bars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage driver optics o 120V o DIM-Dimming o FL-Flood(Standard) B5IC-LED o 14W o 277V optic accessories o BP5LED-SP-Spot

color o 27K o 30K o 35K o 40K o 50K

air-shut AT

Example: B5IC-LED-14W-120V-DIM-FL-30K-AT

116

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


B5rIC-LED-14W-120V-DIM-FL-30K-AT 5” Remodel IC Housing for use with L500 LED series trims

new 7” (178mm) 12-5/8” (320mm) 5-3/4” (144mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

5” Remodel LED dedicated IC housing with integral LED heat management casting and driver (installed on junction box). Designed for remodel installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

all products are u.s. and foreign patent pending

A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 8” joist construction. B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”. C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut– Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage o 120V B5RIC-LED o 14W o 277V

optics driver o DIM-Dimming o FL-Flood(Standard) optic accessories o BP5LED-SP-Spot

color o 27K o 30K o 35K o 40K o 50K

air-shut AT

Example: B5RIC-LED-14W-120V-DIM-FL-30K-AT

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

117


5” led L500 BAFFLE trims L530w-wh - Stepped Baffle

baffle finish : w-White (Ordering information) L530w-wh ring finish : WH

2-5/8”

6-1/4”

L530w-WH Photometric Multiplier 1.0

L530p-wh - Stepped Baffle baffle finish : p-black (Ordering information) L530p-xx ring finish : BK

WH

L530p-bK

L530p-WH

2-5/8”

6-1/4”

Photometric Multiplier .75

L530sn-sn - Stepped Baffle baffle finish : sn-satin nickel (Ordering information) L530sn-sn ring finish : SN

2-5/8”

L530SN-sn

6-1/4”

Photometric Multiplier .92

L530cp-cp - Stepped Baffle baffle finish : cp-copper (Ordering information) L530cp-cp ring finish : CP

2-5/8”

6-1/4”

L530CP-cp Photometric Multiplier .87

L530bz-bz - Stepped Baffle baffle finish : bz-bronze (Ordering information) L530bz-bz ring finish : BZ

2-5/8”

6-1/4”

L530BZ-bz Photometric Multiplier .85

B5IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l530w-wh test no.: lli 0809-14A6 lumens: 606 spacing criteria: .18

Zonal Lumens Summary Zone Lumens %Lamp 372.11 n.a. 0-300 0 501.35 n.a. 0-40 573.13 n.a. 0-600 0 606.63 n.a. 0-90 0 606.63 n.a. 0-180 Total Luminaire Efficacy = 43 lpw

Luminance Data (cd/sq.m) %Fixt 61.3 82.6 94.5 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

2903 1652 1744 1831 1208

2903 1652 1744 1831 1208

2903 1652 1744 1831 1208

634

1269 1903 2537

118

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


l511w-wh - Baffle Wall Wash (Ordering information) l511X- xx BAFFLE finish : BZ

cp

SN

WH

P

ring finish :

6-1/4”

WH all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

119


5” led L500 REFLECTOR trims

l507w-wh

l507mb-wh

l507bz-bz

l507mb-bk

l507cl-ch

Photometric Multiplier .87

Photometric Multiplier .77

Photometric Multiplier 1.0

Photometric Multiplier .95

l507cl-wh

Photometric Multiplier .77

l507rg-wh

Photometric Multiplier 1.0

l507sn-wh

Photometric Multiplier .90

l507cp-wh

Photometric Multiplier .87

l507rg-pb

Photometric Multiplier .90

l507sn-sn

Photometric Multiplier .90

l507cp-cp

Photometric Multiplier .87

Photometric Multiplier .90

REFLECTOR finish : bz

bronze

CL

clear (chrome)

CP

copper

MB

black

RG

gold

SN

W

satin nickel

white

SN

WH

2-5/8”

trim/ring finish : BK

black

BZ

bronze

CH

chrome

B5IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l507cl-wh test no.: lli 0809-14A5 lumens: 661 spacing criteria: .20

CP

copper

Zonal Lumens Summary Zone Lumens 418.02 0-300 541.23 0-400 625.17 0-600 661.59 0-900 661.59 0-1800

PB

polish brass

satin nickel

6-1/4”

white

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 47 lpw

%Fixt 63.2 81.8 94.5 100 100

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

the most up to date photometric data is available online @ WWW.IUSEELITE.com

120

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

121


5” led L500 lensed baffle trims l535w-wh - Baffle with Frosted Lens (Ordering information) l535w- xx baffle finish : W

P

ring finish :

6-1/4”

WH

Photometric Multiplier .87

l536w-wh - Baffle with Fesnel Lens (Ordering information) l536x- xx baffle finish : W

P

ring finish : WH

Photometric Multiplier .87

B5IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-l530w-wh test no.: lli 0809-14A6 lumens: 606 spacing criteria: .18

6-1/4”

Zonal Lumens Summary Zone Lumens 372.11 0-300 501.35 0-400 573.13 0-600 606.63 0-900 606.63 0-1800

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 61.3 82.6 94.5 100 100

Total Luminaire Efficacy = 43 lpw

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

2903 1652 1744 1831 1208

2903 1652 1744 1831 1208

2903 1652 1744 1831 1208

634

1269 1903 2537

the most up to date photometric data is available online @ WWW.IUSEELITE.com

l504wh - Designer Dome Lens lens finish : White (Ordering information) l504 xx ring finish : BK

WH

CH

SN

CP

BZ

L504bK

L504WH

L504ch

L504SN

L504CP

L504BZ

6-1/4”

l501wh - Metal Albalite Lens lens finish : White (Ordering information) l501 xx ring finish : BK

WH

CH

SN

CP

BZ

L501bK

L501WH

L501ch

L501SN

L501CP

L501BZ

6-1/4”

l505wh - Metal Fresnel Lens lens finish : clear (Ordering information) l505 xx ring finish :

122

BK

WH

CH

SN

CP

BZ

L505bK

L505WH

L505ch

L505SN

L505CP

L505BZ

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

6-1/4”

all products are u.s. and foreign patent pending


5” led L500 lensed reflector trims l541cl-wh - Reflector with Frosted Lens (Ordering information) l541cl- xx REFLECTOR finish : CL

MB

RG

W

ring finish : Photometric Multiplier .89

6-1/4”

WH

l542cl-wh - Reflector with Fresnel Lens (Ordering information) l542cl- xx REFLECTOR finish : CL

MB

RG

W

ring finish : Photometric Multiplier .89

B5IC-LED-14W-120V-DIM-BP6LEDSP-30K-AT-L507cl-wh test no.: lli 0809-14A5 lumens: 661 spacing criteria: .20

6-1/4”

WH Zonal Lumens Summary Zone Lumens 418.02 0-300 541.23 0-400 625.17 0-600 661.59 0-900 661.59 0-1800

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

%Fixt 63.2 81.8 94.5 100 100

Total Luminaire Efficacy = 47 lpw

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

3350 1836 1993 1831 1208

the most up to date photometric data is available online @ WWW.IUSEELITE.com

l504L - Designer Dome Lens with Plastic Trim Ring lens finish : White (Ordering information) l504l ring finish :

WHITE - PLASTIC 6-1/4”

l501l - Albalite Lens with Plastic Trim Ring lens finish : White (Ordering information) l501l ring finish :

WHITE - PLASTIC 6-1/4”

l505l - Fresnel Lens with Plastic Trim Ring lens finish : clear (Ordering information) l505l ring finish :

WHITE - PLASTIC all products are u.s. and foreign patent pending

6-1/4”

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

123


B25IC-LED-14W-120V-DIM-FL-30K-AT 5” New Construction Shallow IC Housing for use with L500 LED series trims

new 7” (178mm)

5” (127mm)

10” (254mm) 12”-25” (305mm-610mm)

5-3/4” (144mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

5” LED dedicated Shallow IC housing with integral LED heat management casting and driver (installed on junction box). Designed for new construction installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features - Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 6” joist construction. B. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with true pryout slots and strain clamps. Designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage o 120V B25IC-LED o 14W o 277V

optics driver o DIM-Dimming o FL-Flood(Standard) optic accessories o BP5LED-SP-Spot

color o 27K o 30K o 35K o 40K o 50K

air-shut AT

Example: B5IC-LED-14W-120V-DIM-FL-30K-AT

124

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


B25rIC-LED-14W-120V-DIM-FL-30K-AT 5” Remodel Shallow IC Housing for use with L500 LED series trims

new 5” (127mm) 12-5/8” (320mm) 5-3/4” (144mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 60Hz 200mA 1250mA 13.89W(+/-5%) 14W 9% >0.9

5” Remodel LED dedicated Shallow IC housing with integral LED heat management casting and driver (installed on junction box). Designed for remodel installations and suitable for use in insulation covered or non-insulation covered ceilings. Consuming less than 14 watts and producing over 600 usable lumens. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 65wBR30 and 25% less than the common 18w CFL. Plus the Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life, with California Title-24-2008 compliance and Energy Star Rating. Features Greater light output than an 18w CFL or a 65w BR30 while consuming less than 14w of power. Optics – Anyone can mount a chip to a heat sink and make a downlight. Gather the light scattered by the LED chip, shape it into a functional beam with state of the art reflectors, integrate the light through a smooth lens to minimize brightness, then top it all of with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, light engine; consuming less than 14 watts and producing over 600 lumens. Available optics: • Spot • Flood Durability – Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Heat sink is attached to top of housing. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradable. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat form the LED chip, allowing continued cool operation for years. Life tests have shown the Elite light engine output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elite’s driver is installed on the junction box cover so it may be serviced from below the ceiling. In installations of 277v, we offer a step down transformer options that is field installable. Repeatable – Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, California Title-24-2008 and Energy Star compliance are standard. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable – The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word – The Elite LED lighting system is warranted for 3 years. As a system, we stand behind the entire Elite products from housing to bar hangers.

all products are u.s. and foreign patent pending

A. Housing – Die-formed aluminum for maximum heat dissipation and rust protection. Housing can be installed in 1/2“ to 1-3/8” thick ceilings. Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications. May be installed in 2” x 6” joist construction. B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”. C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut– Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

ITEM SELECTOR: (Please check the boxes below for the option desired) type waTTAGE voltage driver optics o 120V o DIM-Dimming o FL-Flood(Standard) B25RIC-LED o 14W o 277V optic accessories o BP5LED-SP-Spot

color o 27K o 30K o 35K o 40K o 50K

air-shut AT

Example: B5RIC-LED-14W-120V-DIM-FL-30K-AT

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

125


126

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

all products are u.s. and foreign patent pending


5” led L500 trims for b25ic-led and b25ric-led housings l531w-wh

Stepped Baffle (Ordering information) l531X- xx

available color combinations: cp-cp, sn-sn, w-wh, p-wh, p-bk, bz-bz

cp

reflector finish :

SN

W

P

cl

ring finish :

BK

WH

cp

mb

rg

sn

w

CH

PB

SN

CP

ring finish :

CH

PB

SN

CP

BZ

led lensed trim

BK

WH

BZ

led polycarbonate lensed trim

l504wh - Designer Dome Lens

l504L - Designer Dome Lens with Plastic Trim Ring lens finish: WHite

lens finish: white

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

l501wh - Metal Albalite Lens

l501l - Albalite Lens with Plastic Trim Ring lens finish: WHite

lens finish: white

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

l505wh - Metal Fresnel Lens

all products are u.s. and foreign patent pending

Reflector (Ordering information) l508X- xx

available color combinations: cp-cp, w-wh, rg-wh, mb-wh, cl-wh, mb-bk, rg-pb, cl-cH

BAFFLE finish :

BZ

l508CL-wh

l505l - Fresnel Lens with Plastic Trim Ring lens finish: clear

lens finish: clear

ring finish: bk, wh, ch, sn, cp, bz

ring finish: white plastic

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

127


LED-4-IC-11W 4” LED dedicated Architectural New Construction IC housing for use with LED-1401 and LED-1402 trims

new

7-1/4” (184mm)

8” (205mm)

4-3/8” (110mm)

12”-24” (305mm-610mm)

12-1/4” (312mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 11W(+/-5%) 11W 9% >0.9

4” LED dedicated Architectural New Construction IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in insulation covered ceilings. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 11 watts and producing over 465 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the 50w BR20, 50% less energy than a 20w MR16 and 25% less than the common 13w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 13w CFL, a 20w MR16 or a 50w BR20 while consuming 11 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 11 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation. Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available. Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 11 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The LED-4-IC-11W eco-friendly Elite LED system is warranted for 3 years.

ITEM SELECTOR: (Please check the boxes below for the option desired) type led-4-ic

waTTAGE o 11W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

A. Housing - Housing is IC rated for direct contact with insulation. May be installed in 2” x 8” joist construction. • Outer Die-formed aluminum construction for maximum head dissipating air chamber on top of the housing. Junction box could me accessed from inside and outside housing. • Inner – deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2” to 1-3/8” ceiling. B. Bar Hangers – •Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

Example: LED-4-ic-11W-120V-DIM-AT

128

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


LED-4-11W 4” LED dedicated Architectural New Construction Non-IC housing for use with LED-1401 and LED-1402 trims

5-1/2” (140mm)

12”-24” (305mm-610mm)

new

5-1/2” (140mm)

8” (204mm)

4-3/8” (110mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 11W(+/-5%) 11W 9% >0.9

4” LED dedicated Architectural New Construction Non-IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 11 watts and producing over 465 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the 50w BR20, 50% less energy than a 20w MR16 and 25% less than the common 13w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 13w CFL, a 20w MR16 or a 50w BR20 while consuming 11 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 11 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation. Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available. Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 11 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers. Our Word - The LED-4-11W eco-friendly Elite LED system is warranted for 3 years.

ITEM SELECTOR: (Please check the boxes below for the option desired) type led-4

waTTAGE o 11W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

A. Housing - Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction. B. Bar Hangers – • Double-headed nail is securely positioned 20 down in a hammer swing position for quick installation. Allows for easy removal and relocation and can be easily installed into any wood material. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

Example: LED-4-11W-120V-DIM-AT

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

129


LED-4-r-11W 4” LED dedicated Architectural Remodel Non-IC housing for use with LED-1401 and LED-1402 trims

new

5-1/2” (140mm) 11” (280mm) 4-3/8” (110mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 900mA 11W(+/-5%) 11W 9% >0.9

4” LED dedicated Architectural Remodel NON-IC housing with the driver installed on the junction box. Designed for remodel construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 11 watts and producing over 465 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the 50w BR20, 50% less energy than a 20w MR16 and 25% less than the common 13w CFL. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 13w CFL, a 20w MR16 or a 50w BR20 while consuming 11 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 11 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

A. Housing – Die-formed high temperature painted 22-gauge steel deep-drawn for maximum heat dissipation and rust protection. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction.

Driver - Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”.

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 11 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers.

C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

Our Word - The LED-4-R-11W eco-friendly Elite LED system is warranted for 3 years.

ITEM SELECTOR: (Please check the boxes below for the option desired) type led-4-r

waTTAGE o 11W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

Example: LED-4-R-11W-120V-DIM-AT

130

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


4” led l1401 baffle Trim - Elite engineered, superior quality, 4” architectural LED downlight Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 4” architectural LED downlight; consuming 11 watts and producing over 465 lumens. Among the trim options are: white, black, copper, bronze or satin nickel architectural low glare baffle with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim maximizes reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes, the Elite architectural 4” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

led-1401-11w-fl-30k-w-wh

led-1401-11w-fl-30k-p-wh

Photometric Multiplier 1.0

led-1401-11w-fl-30k-sn-sn

Photometric Multiplier .75

led-1401-11w-fl-30k-cp-cp

Photometric Multiplier .92

led-1401-11w-fl-30k-p-bk

Photometric Multiplier .87

led-1401-11w-fl-30k-bz-bz

Photometric Multiplier .75

Photometric Multiplier .85

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1401

optics FL

waTTAGE o 11W

color 30K 50K

o

finish o w-wh o p-wh o sn-sn o cp-cp o bz-bz

o o

Example: LED1401-11W-FL-30K-w-wh

baffle finish : BZ

bronze

cp

copper

SN

satin nickel

TRIM: led-1401-11W-fl-30k-w-wh test no.: lli 0909-17A1 lumens: 467 spacing criteria: .14

p-bk

trim/ring finish : WH

white

P

black

Zonal Lumens Summary Zone Lumens 298.98 0-300 368.25 0-400 0 466.88 60 0 467.36 0-90 0 467.36 0-180

BK

black

wh

white

CH

chrome

pb

sn

polish brass

cp

satin nickel

copper

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 42 lpw

%Fixt 64.0 78.8 99.9 100 100

450 550 650 750 850

26,721 451 0 0 0

26,721 451 0 0 0

bz

bronze

Candle Power Distribution (Candelas)

Angle In Average Average Average 450 900 Degrees 00 26,721 451 0 0 0

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

o

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

1228 2456 3684 4912

131


Trim - Elite engineered, superior quality, 4” architectural LED downlight Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 4” architectural LED downlight; consuming 11 watts and producing over 465 lumens. Among the trim options are: architectural flood reflector with clear anodized (chrome), white, black, copper, satin nickel or gold with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim maximizes reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes, the Elite architectural 4” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

4” led L1402 reflector

led-1402-11w-fl-30k-cl-wh

led-1402-11w-fl-30k-cp-wh

Photometric Multiplier 1.0

led-1402-11w-fl-30k-cl-ch

Photometric Multiplier .87

led-1402-11w-fl-30k-sn-sn

led-1402-11w-fl-30k-cp-cp

Photometric Multiplier 1.0

Photometric Multiplier .87

Photometric Multiplier .90

led-1402-11w-fl-30k-cl-sn

led-1402-11w-fl-30k-rg-wh

led-1402-11w-fl-30k-rg-pb

Photometric Multiplier 1.0

TRIM: led-1402-11W-fl-30k-cl-wh test no.: lli 0909-17A3 lumens: 495 spacing criteria: .14

led-1402-11w-fl-30k-sn-wh

Photometric Multiplier .90

Photometric Multiplier .90

Photometric Multiplier .90

Zonal Lumens Summary Zone Lumens 318.02 0-300 391.95 0-400 0 495.29 0-60 0 495.29 0-90 0 495.29 0-180

Total Luminaire Efficacy = 45 lpw

%Fixt 64.2 79.1 100 100 100

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

27,819 0 0 0 0

27,819 0 0 0 0

the most up to date photometric data is available online @ WWW.IUSEELITE.com

132

Candle Power Distribution (Candelas)

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

27,819 0 0 0 0

1307 2615 3922 5229

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


4” led L1402 reflector

led-1402-11w-fl-30k-mb-wh

led-1402-11w-fl-30k-mb-bk

led-1402-11w-fl-30k-w-wh

Photometric Multiplier .77

Photometric Multiplier .95

Photometric Multiplier .77

led-1402-11w-fl-30k-bz-bz

led-1437-11w-fl-30k-bz-bz

led-1462-11w-fl-30k-bz-bz

Photometric Multiplier .87

REFLECTOR finish : cl

Cp

trim/ring finish :

mb

clear copper (chrome)

rg

black

gold

SN

satin nickel

W

white

bz

bronze

BK

black

wh

white

CH

chrome

pb

sn

cp

o o

cl-ch cp-cp

o

o o o

sn-sn rg-pb mb-bk

polish brass

satin nickel

copper

bz

bronze

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1402

waTTAGE o 11W

optics o FL

color o 30K o 50K

finish o cl-wh o cp-wh o w-wh o bz-bz o sn-wh o rg-wh o mb-wh

cl-sn

Example: LED1402-11W-FL-30K-cl-wh all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

133


LED-3-ic-6W 3” LED dedicated Architectural New Construction IC housing for use with LED-1301 and LED-1302 trims

new

7-1/4” (184mm)

7-7/8” (199mm)

3-3/4” (95mm)

12”-24” (305mm-610mm)

12-1/4” (312mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 480mA 6.6W(+/-5%) 6W <10% >0.9

3” LED dedicated Architectural New Construction IC housing with the driver installed on the junction box. Designed for new construction installations and suitable for use in insulation covered ceilings. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 6 watts and producing over 350 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the equivalent 25wPAR36. Plus, the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 25w PAR36 while consuming 6 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 6 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation. Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available. Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 6 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared.

A. Housing – Housing is IC rated for direct contact with insulation. May be installed in 2” x 8” joist construction. • Outer Die-formed aluminum construction for maximum head dissipating air chamber on top of the housing. Junction box could me accessed from inside and outside housing. • Inner – deep-drawn single piece aluminum construction for maximum heat dissipation and rust protection. Adjusts vertically in plaster frame to accommodate 1/2” to 1-3/8” ceiling. B. Bar Hangers – • Double headed nail is securely positioned 20° down in a hammer swing position. One end of bar hangers hinges 90°, and allows easy access to splice box. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span.

Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers.

C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling.

Our Word - The LED-3-IC-6W eco-friendly Elite LED system is warranted for 3 years.

D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements.

ITEM SELECTOR: (Please check the boxes below for the option desired) type led-3-ic

waTTAGE o 6W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for Direct Contact with Insulation

Example: LED-3-ic-6W-120V-DIM-AT

134

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


LED-3-6W 3” LED dedicated Architectural New Construction Non-IC housing for use with LED-1301 and LED-1302 trims

5-1/2” (140mm)

12”-24” (305mm-610mm)

new

5-1/2” (140mm)

8” (204mm)

3-3/4” (95mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 480mA 6.6W(+/-5%) 6W <10% >0.9

3” LED dedicated Architectural New Construction NON-IC housing with the driver installed on the junction box. Designed for New Construction construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 6 watts and producing over 350 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the equivalent 25wPAR36. Plus the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 25w PAR36 while consuming 6 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 6 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation. Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available. Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 6 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers.

A. Housing – Die-formed aluminum and galvanized steel for maximum heat dissipation and rust protection. Housing adjusts vertically in plaster frame to accommodate 1/2“ to 1-3/8” thick ceiling. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction. B. Bar Hangers – • Double headed nail is securely positioned 20° down in a hammer swing position. One end of bar hangers hinges 90°, and allows easy access to splice box. • Bar hanger ends have quick location tab, can be modified to fit in 12” joist spans without removal from housing and are equipped with additional holes and slots for use when local codes require luminaires to be additionally secured. • Notch and tab in bar hanger ends allow installation on standard commercial Tbars and grid ceiling supports without additional modification, clips or brackets. • Bar hangers can be positioned on either the long or short axis of the housing and locked in position on all sides at any place along a 24” span. C. Junction Box – UL Listed for through-branch circuit wiring, provided with four ½” knockouts, one ¾” knockout and four Romex knockouts with integral strain clamps, all knockouts have true pry-out slots. J-box is designed for straight through conduit runs. Driver is installed on the junction box cover so it may be serviced from below the ceiling. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material.

Our Word - The LED-3-6W eco-friendly Elite LED system is warranted for 3 years.

E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national air flow requirements.

ITEM SELECTOR: (Please check the boxes below for the option desired)

UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

type led-3

waTTAGE o 6W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

Example: LED-3-6W-120V-DIM-AT

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

135


LED-3-r-6W 3” LED dedicated Architectural Remodel Non-IC housing for use with LED-1301 and LED-1302 trims

new

5-1/2” (140mm) 12-1/2” (318mm) 3-3/4” (95mm)

INPUT VOLT. INPUT FREQ. INPUT CUR. LED DRIVER CUR. INPUT POWER LED POWER THD POWER FACTOR 120V 50/60Hz 200mA 480mA 6.6W(+/-5%) 6W <10% >0.9

3” LED dedicated Architectural Remodel NON-IC housing with the driver installed on the junction box. Designed for remodel construction installations and suitable for use in ceilings where insulation is kept 3 inches from housing. The excellent color rendering index of 85+ and realistic color temperature of 3,000 degrees Kelvin confirms that the Elite LED luminaires are ideally suited for use in hospitality, health care, commercial, retail and residential applications. Consuming 6 watts and producing over 350 usable lumens, the lighting is smooth and comfortable while using nearly 80% less energy than the equivalent 25wPAR36. Plus the eco-friendly Elite Lighting LED system features 70% lumen maintenance at 50,000 hours life. Features Greater light output than a 25w PAR36 while consuming 6 watts of power. Durability - Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing continued cool operation for years. Life tests have shown the 6 watt Elite LED output will be maintained at 70% of initial lumens at 50,000 hours of operation.

A. Housing – Die-formed high temperature painted 22-gauge steel deep-drawn for maximum heat dissipation and rust protection. Designed for new construction installations and is suitable for use in ceilings where insulation is kept 3 inches from housing. May be installed in 2” x 6” joist construction.

Driver - Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermally protected for additional safety. Elites driver is installed on the junction box cover, it is easily accessible for serviced from below the ceiling. Additionally, a 277v options is available.

B. Installation – For fast and easy installation in existing plaster or mechanical ceilings the housing installs from below the ceiling. Four preinstalled spring clips with secure the housing firmly into ceiling to accommodate different ceiling thicknesses form 1/2” to 1-3/8”.

Repeatable - Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the 6 watt Elite LED is engineered for quality. Our superior design allows for installation in construction that requires the Elite Air-Shut™ system. All Elite LED luminaries are rated at 85+ CRI and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications require only those chips that produce no ultra violet and virtually no infrared. Dimmable - The Elite LED lighting system is fully dimmable down to 15%. No extra equipment or complicated electronics are required, simply install on a circuit using a standard incandescent wall dimmer. Applications that will be three or fewer luminaires or applications that required dimming down to 5% or in applications where more than one dimmer can control the luminaires (daylight harvesting, programmed controls, etc.) will require load compensating dimmers.

C. Junction Box – UL Listed for through-branch circuit wiring, provided with eight ½” knockouts and four Romex knockouts with true pry-out slots and strain clamps. D. Thermal Protection – Standard thermal protection device guards against improper installation and misuse of insulation material. E. Air-Shut – Provided with gasket to prevent airflow from heated or airconditioned spaces. Meets or exceeds all national airflow requirements. UL listed c-UL-us listed for Damp location. c-UL-us listed for feed Through Wiring.

Our Word - The LED-3-R-6W eco-friendly Elite LED system is warranted for 3 years.

ITEM SELECTOR: (Please check the boxes below for the option desired) type led-3-r

waTTAGE o 6W

voltage o 120V o 277V

driver DIM-Dimming

o

air-shut AT

Example: LED-3-r-6W-120V-DIM-AT

136

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


3” led l1301 baffle Trim - Elite engineered, superior quality, 3” architectural LED downlight Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 3” architectural LED downlight; consuming 6 watts and producing over 342 lumens. Among the trim options are: white, black, copper, bronze or satin nickel architectural low glare baffle with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim has been designed to maximize reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes, the Elite architectural 3” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

led-1301-6w-fl-35k-w-wh

led-1301-6w-fl-35k-p-wh

Photometric Multiplier 1.0

led-1301-6w-fl-35k-p-bk

Photometric Multiplier .75

led-1301-6w-fl-35k-sn-sn

Photometric Multiplier .75

led-1301-6w-fl-35k-cp-cp

Photometric Multiplier .92

led-1301-6w-fl-35k-bz-bz

Photometric Multiplier .87

Photometric Multiplier .85

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1301

optics o FL-Flood(Standard)

waTTAGE o 6W

Example: LED1301-6W-FL-35K-w-wh

baffle bafflefinish finish: : BZ

bronze

cp

copper

SN

satin nickel

TRIM: led-1301-6W-fl-35k-w-wh test no.: lli 0909-17A1 lumens: 342 spacing criteria: .14

color o 27K o 30K o 35K o 40K o 50K

finish o w-wh o p-wh o sn-sn o cp-cp o bz-bz

o

p-bk

trim/ring finish : WH

white

P

black

Zonal Lumens Summary Zone Lumens 216.76 0-300 265.50 0-400 0 335.61 0-60 0 342.27 0-90 0 342.27 0-180

BK

black

wh

white

CH

chrome

pb

sn

polish brass

cp

satin nickel

copper

Total Luminaire Efficacy = 57 lpw

%Fixt 63.3 77.6 98.1 100 100

bronze

Candle Power Distribution (Candelas)

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

bz

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

18,668 903 1225 2000 5940

18,668 903 1225 2000 5940

18,668 903 1225 2000 5940

the most up to date photometric data is available online @ WWW.IUSEELITE.com all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

137


Trim - Elite engineered, superior quality, 3” architectural LED downlight Gather the light scattered by the LED chip, shape it into a functional beam with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite engineered, superior quality, 3” architectural LED downlight; consuming 6 watts and producing over 357 lumens. Among the trim options are: architectural flood reflector with clear anodized (chrome), white, black, copper, satin nickel or gold with a variety of trim ring color options. Die-cast aluminum trim and integral heat management system are engineered for extremely long life and service period. The heat sink extrusion is made from 3001 aluminum and is engineered to be in intimate contact with the die-cast trim. The cast trim has been designed to maximize reflective surface areas while keeping effective heat dissipation a priority. As technology improves or the needs of a space changes the Elite architectural 3” LED trim can be upgraded. Simply pull it down from the housing and unplug the quick EZ-disconnect. Putting in a new trim is just as easy and there is no danger of electrical shock. The EZ-connect system eliminates incidental contact and the system is powered by less than 12 volts.

3” led L1302 reflector

led-1302-6w-fl-35k-cl-wh Photometric Multiplier 1.0

Photometric Multiplier .87

Photometric Multiplier .90

led-1302-6w-fl-35k-cl-ch

led-1302-6w-fl-35k-sn-sn

led-1302-6w-fl-35k-cp-cp

Photometric Multiplier 1.0

Photometric Multiplier .87

Photometric Multiplier .90

led-1302-6w-fl-35k-cl-sn Photometric Multiplier 1.0

led-1302-6w-fl-35k-sn-wh

led-1302-6w-fl-35k-cp-wh

led-1302-6w-fl-35k-rg-wh

led-1302-6w-fl-35k-rg-pb

Photometric Multiplier .90

Photometric Multiplier .90

TRIM: led-1302-6W-fl-35k-cl-wh test no.: lli 0909-17A3 lumens: 357 spacing criteria: .14

Zonal Lumens Summary Zone Lumens 223.45 0-300 275.74 0-400 351.44 0-600 357.44 0-900 357.44 0-1800

Candle Power Distribution (Candelas)

Luminance Data (cd/sq.m) %Lamp n.a. n.a. n.a. n.a. n.a.

Total Luminaire Efficacy = 60 lpw

%Fixt 62.5 77.1 98.2 100 100

Angle In Average Average Average 450 900 Degrees 00 450 550 650 750 850

20,132 1354 1225 2000 2970

20,132 1354 1225 2000 2970

20,132 1354 1225 2000 2970

the most up to date photometric data is available online @ WWW.IUSEELITE.com

138

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


3” led L1302 reflector

led-1302-6w-fl-35k-mb-wh

led-1302-6w-fl-35k-mb-bk

led-1302-6w-fl-35k-w-wh

Photometric Multiplier .77

Photometric Multiplier .95

Photometric Multiplier .77

led-1362-6w-fl-35k-w-wh

led-1302-6w-fl-35k-bz-bz Photometric Multiplier .87

REFLECTOR finish : cl

Cp

trim/ring finish :

mb

clear copper (chrome)

rg

black

gold

SN

satin nickel

W

white

bz

bronze

BK

black

wh

white

CH

chrome

pb

sn

cp

o o

cl-ch cp-cp

o

o o o

sn-sn rg-pb mb-bk

polish brass

satin nickel

copper

bz

bronze

ITEM SELECTOR: (Please check the boxes below for the option desired) type LED1302

waTTAGE o 6W

optics o FL-Flood(Standard)

color o 27K o 30K o 35K o 40K o 50K

finish o cl-wh o cp-wh o w-wh o bz-bz o sn-wh o rg-wh o mb-wh

cl-sn

Example: LED1302-6W-FL-35K-cl-wh all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

139


Elite led link - Slim profile.

GREAT performance.

The Ultra efficient, maintenance free, LED Link luminaire is slim and beautifully contoured in a low-profile housing, with an anodized aluminum finish. Elite Lighting’s LED Link luminaires feature 1-watt high-output LEDs in 3000, 3500, 4100 and 5000 degrees Kelvin color temperatures. With up to 55 lumens-per-watt and 187 lumens-per-foot, it is one of the most energy saving products in the lighting industry. Its rated life of 50,000-hours equals over 10 years of maintenance free operation when operating 12 hours per day. It consumes less than one-eighth the energy of halogen and xenon lighting. This high output LED technology has no forward projected heat or harmful UV. It is California Title 24 compliant. It offers a combination of connector cables and mounting brackets that install at different angles, thus, it provides the highest level of contractor friendly installations.

140

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


Applications LED applications and uses continue to grow. At first, were used in direct view applications, such as traffic lights and billboard signs. Today, LEDs are used to light coves and accent pathways. PRODUCT FEATURES • Maximized performance, specification grade, LED strip in custom anodized housing • Available in pre-cut sections allowing field assembly to every 6 inches • 6”, 12”, 24”, 36” and 48” are standard • Engineered to eliminate ‘dark zones’ • 30K, 35K, 41K and 50K available • CRI = 80 • VWF – Very Wide Flood. Distribution of 120° • Chip spacing – 1” on center • Uses 24v AC/DC input • Dimmable on low voltage Lutron dimmers • 40’ max run length • Life rated at 50,000 hours • Built-in circuitry protects against short circuits • Up to 55 LPW • No UV • No IR • No mercury • No lead • No PCBs • No Asbestos

dimenSions TOP Width= .75”

SIDE Height= .5”

LENGTH 6” 12”

24”

36” 48”

PENDING

Ordering guide

PERFORMANCE DATA

EUM-LED series

LENGTH

VOLTAGE

EUM-LED

6” 12” 24” 36” 48”

24V

COLOR TEMPERATURE 30K 35K 41K 50K

LENGTH

WATTS

LUMENS

6”

1.7

70

12”

3.3

160

24”

6.6

340

36”

9.9

540

48”

13.7

750

The energy consumed by LEDs is far less than incandescents; studies have shown as much as a 75% decrease in the power consumed. The life of LED lighting is much longer than incandescents and significantly longer than fluorescents. The LEDs used in LED Link are rated to 50,000 hours. By comparison, incandescent lamps are rated for about 2,000 hours and fluorescent lamps are rated for about 20,000 hours. 24-hour operation for 6 years will require incandescent lamps to be replaced 13 times. Fluorescent lamps will have been replaced once. LED Link will continue to operate for 5 additional years.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

141


mounting examples

eum-led-ACC-4 / eum-led-ACC-4 Extension coupler typical installation

eum-led-ACC-1 Internal connector typical installation

eum-led-ACC-2 Mounting Clip typical installation

eum-led-ACC-3 Mounting Clip typical installation

Elite’s LED Link offers you a variety of color choices, sizes and mounting options that will meet your project needs.

width = .75” (Actual size)

height = .5”

142

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


accessories

Extension Coupler Allows for space between LED-LINKS eum-led-acc-4 (12” ExtenSion) eum-led-acc-5 (24” Extension) eum-led-acc-6 (48” Extension)

eum-led-driver-50w-24v Extended cord Plug in driver 50w max extended power cord driver

Connects LED-LINK to Plug in driver

Connects Hard wire driver to LED-link

eum-led-acc-7 (12” Extension) eum-led-acc-8 (24” Extension)

eum-led-HW-12 (12” connector) eum-led-HW-24 (24” connector)

eum-led-acc-1 Seamless Inter-Connector Joins Two pieces of LED-LINKS & adds Zero length

eum-led-driver-24w-24v Plug in driver - 24w max

hard wired - dimmable electronic drivers (for use with electronic low voltage dimmers) Part# eum-RS24-60M-LED

Type

Output(24V)

Depth

Height

Width

Weight

Electronic

1@60 watts

3/4”

2-1/8”

1-1/4”

1 lb

hard wired - dimmable magnetic drivers (for use with standard or magnetic low voltage dimmers) Approximate Sizes and Weight Part#

eum-led-acc-2 - Mounting Clip For flat surfaces

Type

Output(24V)

Depth

Height

Width

Weight

eum-EV24-150

Magnetic

1@150 watts

2-15/16”

7-9/16”

3-1/16”

10 lbs.

eum-EV24-200

Magnetic

1@200 watts

2-15/16”

7-9/16”

3-1/16”

12 lbs.

eum-odX-250S-24

Magnetic

1@250 watts

3-3/8”

8-1/16”

4-3/16”

16 lbs.

eum-EV24-300

Magnetic

1@300 watts

3-3/8”

8-1/16”

4-3/16”

16 lbs.

eum-ODX-500

Magnetic

1@500 watts

4-1/4”

9-7/16”

4-11/16”

20 lbs.

eum-ODX-600S

Magnetic

1@600 watts

4-1/4”

9-7/16”

4-11/16”

20 lbs.

eum-ODX-750S-24

Magnetic

2@375 watts

4-1/4”

9-7/16”

4-11/16”

28 lbs.

eum-ODX-1000

Magnetic

2@500 watts

4-15/32”

8-13/32”

7-13/16”

32 lbs.

eum-ODX-1200S

Magnetic

2@600 watts

5-7/16”

10-9/16”

6-3/4”

35 lbs.

hard wired - non-dimmable electronic drivers

eum-led-acc-3 - Mounting Clip For mounting LED-LINKS at 45º in a corner

Approximate Sizes and Weight Part#

Type

Output(24V)

Depth

Height

Width

Weight

eum-ELA-75-24

Electronic

1@75 watts

1-3/8”

6-1/2”

1-1/2”

1 lb

eum-ELA-150-24

Electronic

1@150 watts

1-3/8”

6-1/2”

1-1/2”

1 lb

eum-ELA-300-24

Electronic

1@300 watts

1-1/16”

5-3/16”

1-1/2”

1 lb

dimmable compact led Ac 120V magnetic drivers (for use with standard or magnetic low voltage dimmers)

dimmable compact led Ac 277V magnetic drivers (for use with standard or magnetic low voltage dimmers)

Approximate Sizes and Weight

Approximate Sizes and Weight

Part#

Input(120V) Output(24V) Depth

Height

Width

Part#

Input(277V) Output(24V) Depth

Height

Width

eum-ac-24-40-120

1@40 watts

24V

2.14”

5.03”

2”

eum-ac-24-40-277

1@40 watts

24V

2.14”

5.03”

2”

eum-ac-24-60-120

1@60 watts

24V

2.59”

6.06”

2.2”

eum-ac-24-60-277

1@60 watts

24V

2.59”

6.06”

2.2”

eum-ac-24-100-120 1@100 watts

24V

2.59”

6.06”

2.2”

eum-ac-24-100-277 1@100 watts

24V

2.59”

6.06”

2.2”

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

143


The Linia cove lighting system features conductor mounted lamp holders. This unique design keeps the lamps firmly in place and allows you to contour the light to virtually any shape. The seamless presentation of light around a column or following a slope can truly release your creativity. Linia is now available with our patented unidirectional green LED lamp source, and produce seamless eco-friendly light that you can aim on complex geometrical shapes. Linia produces the uniform light you have come to expect from cove lighting and can cut your energy consumption by up to 80%. Linia can be specified with the new, unidirectional, green LED lamp, SL2-LED. Available in Cool White (5,000 degrees Kelvin) or Super Cool White (7,000 degrees Kelvin) with a life rating of 50,000 hours.

The best solution in architectural linear lighting...

144

www.iuseeliteLED.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

all products are u.s. and foreign patent pending


asymmetrical linia cove led lighting modules LAMP ROTATING FEATURE

3

4

2

The SL2- LED has been designed to be the first asymmetrical and unidirectional lamp for cove lighting. This one-watt source is the first LED lamp that can be rotated in the socket. You have complete control over how the light is distributed. When you need more light on the back wall, simply turn the lamps towards the back wall (1); more light on the ceiling, simply turn the lamps to face up (2); more light on the face of the cove, the SL2 - LED rotates easily in the socket (5). You have 100% control!

1

5

LAMP STYLE GUIDE To determine the most attractive and efficient form of lighting for your application, begin by selecting the best lamp type, lamp spacing, and wattage. Then design the system for your specific needs by selecting the right accessories. As a general rule, the basic version of our product uses 1-watt lamp 2.4” on center and can uniformly illuminate surfaces positioned as close as 2” to 3” from the fixture. Lamp sockets are designed to be attached with mounting screws, offering complete flexibility of adjustment in countless directions. These products feature 50,000 hours of rated life and a choice of 5000ºK and 7000ºK color temperature.

SL2-LED-2.4-24-1-CW The SL2-LED-2.4-24-1-CW is the most versatile and widely chosen fixture, as it is suitable for most applications and delivers an optimal combination of lumen output, lamp life, and color temperature.

SL2-LED-2.4-24-1-SW When higher color temperature are acceptable, the SL2-LED-2.4-24-1-SW can offer greater lumen output and color temperature.

how to specify festoon led linia cove system (Please see required accessories per section)

QTY

-

quantity

100 length Specify/ft.

-

SL2-LED

-

product code 2.4 3 4 5 6

required accessories per section Terminal Block Connectors - PART#: SL-LED-TB

# of section all products are u.s. and foreign patent pending

3

-

lamp spacing 2.4” O.C. 3” o.c. 4” o.c. 5” o.c. 6” o.c.

24

-

1

voltage

wattage

24v 12V

1w

-

WW

-

lamp type (Ww=2700K) WARM white (cw=5000K) cool white (sw=7000K) super cool white RED BLUE GREEN

LC

-

MC

lens option

option

lens cover

mounting channel

Mini Junction Box Connectors - PART#: SL-LED-JBC

end cap - Part#: Sl-LED-EC

# of section

# of section

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

145


linia cove led lighting modules required accessories per section Terminal Block Connectors (PART#: SL-LED-TB) The connector can be connected to one end of the Linia Cove Lighting fixture. The other end 0.75” 0.75” could be connected to #14, 12, or 10 AWG wire. 0.8” The connector can be mounted through a hole in its center.

3” 1.5”

Width = 1.9”

Mini Junction Box Connectors (PART#: SL-LED-JBC) When wiring must be installed within a structure, it may be necessary to connect the fixture using coded wiring. In such cases, a very small junction box with a 1/2”knockout may be utilized with conduit fittings. end cap (Part#: Sl-LED-EC) A vinyl end cap is supplied at the end of a run to safeguard the conductors. mounting screws (Part#: SL-LED-SC) Four holes are found in each lamp socket. Two screws in opposite corners must be tightened for proper installation.

system layout and transformer In designing a lighting system, consideration must be given to the following points: 1. Maximum length of each fixtures run. 2. Output load of each transformer circuit. 3. Total load of transformer. To avoid a voltage drop, long runs of the product can only be maintained by centrally locating the transformer and feeding fixtures on either side. MAXIMUM FIXTURE SIZE The maximum capacity of a fixture must not exceed 20 amps (480 watts @ 24 volts). If a run length exceeds these limitations, then it should only be provided by multiple fixtures. Each fixture then requires an independent feed running to the transformer. Additionally, fixtures using 6” on center are further restricted in size to prevent excessive drops in voltage. Please call our technical department for more details.

channel clamps (Part#: SL-LED-CL) These clamps, which can easily be screwed into position, are compatible with the SL2-MC mounting channel. options

LENS COVER (PART#: SL2-LC) A clear polycarbonate lens may be used to protect lamps from contact when the application requires such protection. The lenses are open-ended so as to facilitate ventilation.

MOUNTING CHANNEL (PART#: SL2-MC) For straight-run applications, we offer a tough, high-temperature plastic channel. The channel can be screwed in place and the lamp socket pushed into position, resulting in a very simple installation and flawless linear integrity. 146

transformers Transformers are UL- and CUL-listed for use with lighting fixtures. These transformers are for use with 120/240 VAC/60 Hz input. The 24 volt secondary outputs are protected by inherent fuses with a maximum rating of 20 amps. The appropriate transformer can easily be determined by multiplying the number of lamps by the watts per lamp. For larger transformers, consideration should be given to the maximum capacity of each fused output. Capacities shown are conservative underestimates by approximately 20%.

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


linia cove led lighting modules wiring diagram Transformer 120 VAC input

Fused 24 VAC Outputs

Do Not Exceed Max. Fixture Length

Connector (SL-TB or SL-JBC)

Lighting Fixture Do Not Exceed Transformer Output Rating

Approximate Sizes and Weight Part#

Type

Output(24V)

Depth

Height

Width

Weight

EV24-150*

Magnetic

1@150 watts

2-15/16”

7-9/16”

3-1/16”

10 lbs.

EV24-200*

Magnetic

1@200 watts

2-15/16”

7-9/16”

3-1/16”

12 lbs.

odX-250S-24* Magnetic

1@250 watts

3-3/8”

8-1/16”

4-3/16”

16 lbs.

EV24-300*

Magnetic

1@300 watts

3-3/8”

8-1/16”

4-3/16”

16 lbs.

ODX-500*

Magnetic

1@500 watts

4-1/4”

9-7/16”

4-11/16”

20 lbs.

ODX-600S*

Magnetic

1@600 watts

4-1/4”

9-7/16”

4-11/16”

20 lbs.

ODX-750S-24* Magnetic

2@375 watts

4-1/4”

9-7/16”

4-11/16”

28 lbs.

ODX-1000*

Magnetic

2@500 watts

4-15/32”

8-13/32”

7-13/16”

32 lbs.

ODX-1200S*

Magnetic

2@600 watts

5-7/16”

10-9/16” 6-3/4”

35 lbs.

*277V available upon request

sl2-led maximum fixture size lamp spacing

2.4”o.c.

3”o.c.

4”o.c.

6”o.c.

number of lamps/foot

5

4

3

2

max. length @ 24v 1w

96’

120’

150’

150’

max. wattage @ 24v 1w

480

480

450

300

max. lamps/circuit @ 24v 1w

480

480

450

300

transformer specification guide Requested wattage = Lamp Wattage x number of lamp/ft of transformer 1W

x Length

The maximum capacity of a fixture must not exceed 20 amps (480 watts @ 24 volts). If a run length exceeds these limitations, then it should only be provided by multiple fixtures. Each fixture would then require an independent feed running to the transformer. Additionally, fixtures using 6” on center are further restricted in size to prevent excessive drops in voltage. Please call our technical department for more details. replacement lamps for existing rigid loop 24v cove lighting systems (or elite sl1 system) catalog wattage voltage color

2.4” O.C. = 5 lamps 3” O.C. = 4 lamps 4” O.C. = 3 lamps 5” O.C. = 2.4 lamps 6” O.C. =2 lamps

SL1-LED-CW-12

1W

12V

50K

SL1-LED-SW-12

1W

12V

70K

SL1-LED-CW-24

1W

24V

50K

SL1-LED-SW-24

1W

24V

70K

replacement lamps for existing festoon 24v cove lighting systems (or elite sl2 system)

use fromula to determine which transformer to use

catalog wattage voltage color

Requested wattage = Lamp Wattage x number of lamp/ft of transformer 150W

all products are u.s. and foreign patent pending

1W

4” O.C. = 3 lamps

x Length 50’

SL2-LED-CW-12

1W

12V

50K

SL2-LED-SW-12

1W

12V

70K

SL2-LED-CW-24

1W

24V

50K

SL2-LED-SW-24

1W

24V

70K

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

147


LED STEP LIGHTS Lighting on stairs and pathways is a beautiful addition to your architecture and the Elite LED step light family is a perfect solution. Elite Lighting’s architectural specification grade step lighting utilizes the latest LED technology giving you the energy efficient design options you need. Whether in concrete, masonry work or wood, Elite Lighting’s wet location, green designed step lights will beautifully and efficiently light the way.

Elite Lighting’s full LED line includes; 4-inch and 7-inch concrete housings, and 8 inch drywall housing and 3 inch round surface mount housings. All trims are finished with textured powder coat for long life and durability. A frosted lens and a silicone gasket is standard on all Elite Lighting step lights. 148

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


st8 series LED STEP LIGHTS HOUSING Die-formed heavy gauge galvanized steel body. Encloses high performance aluminum reflector assembly. Supplied with 3 kos and two 1/2” pre-threaded NPS holes. Listed for through feed wiring. TRIM Die-cast aluminum faceplate seals aperture and frosted tempered glass with onepiece silicon gasket. Available with open lensed or lensed 45° cut-off four-slot louver.

ST801-AL

DRIVER UL Listed, Class P, thermally protected and self-resetting driver is designed to increase lamp life and maximize light output without noise or flicker. Luminaires are also available for 12v input and remote driver. ST802-AL 8-1/2”

4”

3-7/8”

housing wattage lamp type st-8bx-led-ww-120V 3w LED st-8bx-led-cw-120V 3w LED st-8bx-led-ww-12V 3w LED st-8bx-led-cw-12V 3w LED finish: w= white

face plate st-801 st-802 finish: w= white br= bronze AL= Satin aluminum

7-7/8”

3-1/4”

Housing and face plate must be ordered separately.

st7 series LED STEP LIGHTS HOUSING Commercial quality die-cast aluminum body. Powder coated exterior and formed with 3% copper component to minimize corrosion in concrete applications. Encloses high performance aluminum reflector assembly. Supplied standard with three 1/2” pre-threaded NPS holes. Listed for through feed wiring.

ST701-BR

TRIM Die-cast aluminum faceplate seals aperture and frosted tempered glass with one-piece silicon gasket. Available with open lensed, lensed 45° cut-off three slot louver or lensed 45° cut-off one slot louver. ST702-BR

DRIVER UL Listed, Class P, thermally protected and self-resetting driver is designed to increase lamp life and maximize light output without noise or flicker. Luminaires are also available for 12v input and remote driver.

ST703-BR 3-1/4”

8-1/4”

3-1/4” 2-1/2”

housing wattage lamp type st-7bx-led-ww-120V 3w LED st-7bx-led-cw-120V 3w LED st-7bx-led-ww-12V 3w LED st-7bx-led-cw-12V 3w LED finish: w= white

7”

face plate st-701 st-702 st-703 finish: w= white br= bronze AL= Satin aluminum SN= Satin nickel

Housing and face plate must be ordered separately. all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

149


st4 series LED STEP LIGHTS HOUSING Commercial quality die-cast aluminum body. Powder coated exterior and formed with 3% copper component to minimize corrosion in concrete applications. Encloses high performance aluminum reflector assembly. Supplied standard with four 1/2” pre-threaded NPS holes. Listed for through feed wiring. TRIM Die-cast aluminum faceplate seals aperture and frosted tempered glass with one-piece silicon gasket. Available with open lensed, lensed 45° cut-off three slot louver or lensed 45° cut-off one slot louver.

ST401-BR

ST402-BR

DRIVER UL Listed, Class P, thermally protected and self-resetting driver is designed to increase lamp life and maximize light output without noise or flicker. Luminaires are also available for 12v input and remote driver. housing wattage lamp type st-4bx-led-cw-12V 3w LED st-4bx-led-ww-12V 3w LED st-4bx-led-cw-120V 3w LED st-4bx-led-ww-120V 3w LED finish: w= white

Housing and face plate must be ordered separately.

face plate st-401 st-402 st-403 finish: w= white br= bronze AL= Satin aluminum SN= Satin nickel

ST403-BR 3-1/4”

5-1/4”

3-1/2” 4-5/16”

2-1/2”

st3 series LED STEP LIGHTS HOUSING Commercial quality die-cast aluminum body. Powder coated exterior and formed with 3% copper component to minimize corrosion in concrete applications. Encloses high performance aluminum reflector assembly. Two pre-drilled mounting holes and slot for flat surface mounting are standard. TRIM Die-cast aluminum faceplate seals aperture and frosted tempered glass with onepiece silicon gasket. Available with lensed 45° cut-off five slot louver or lensed 45° cut-off one slot louver.

ST301-BR

3-5/16”

4”

DRIVER Not included in luminaire. Must be ordered separately.

3/4”

housing wattage lamp type st-301-led-ww-12V 3w LED st-301-led-cw-12V 3w LED st-302-led-ww-12V st-302-led-cw-12V

2”

3w LED 3w LED 3/4”

finish: w= white br= bronze AL= Satin aluminum

ST302-BR 2-13/16”

3-7/8”

surface mount applications only 150

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


se series LED STEP LIGHTS

4-1/2”

2-3/4”

3”

4” 2-1/2”

• 1 W (0.05W X 8) SE106-led-WH Diffuse Glass Lens with White Trim

SE107-LED-WH Angled Louvers with White Trim

• 120V input • For use indoors in insulated (IC) and Non-insulated (NON-IC) areas. • For damp location only. • Conforms to UL standard 1598.

• fits in handy box which is 1-7/8” deep, 2” w x 4’ h • • fits in switch box which is 1-7/8” deep, 2” w x 4’ h •

FINISH: WH-White

AM-Amber

se series LED STEP LIGHTS 13-5/8” will expand to 25”

3-1/2”

6-5/8”

8-5/16”

SE105-led-WH Diffuse Glass Lens w/ White Trim Trim size: L=9-1/2” X H=4-7/8”

3-5/8”

• 3W (0.05X18) • 120V input • For use indoors in insulated (IC) and Non-insulated (NON-IC) areas. • For damp location only. • Conforms to UL standard 1598. SE841-LED-WH Angled Louvers w/ White Trim Trim size: L=9-1/2” X H=4-7/8”

FINISH: WH-White

Housing included all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

151


led undercabinet lighting

led-hu-03PB Surface/Recessed

led-hu-08PB Surface/Recessed

led-hu-02PB Surface/Recessed

FINISH SN satin nickel

wh White

ch chrome

pb polish brass

bk black

cp copper

Description: • Die-cast aluminum body • May be mounted recessed or surface (mounting ring supplied) • Includes 12” wire leads and connector • Ceiling opening is 2-1/8” • 2W LED Warm White* 180 lumens • To be used with 12V transformers.*

*Must use with remote transformer (not provided). See page 157.

7/8”

3/4”

152

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


led undercabinet lighting

led-hu-14 Surface/Recessed

Description: • Die-cast aluminum body • May be mounted recessed or surface mounting ring supplied) • Includes: Three fixtures with quick connectors and mounting hardware. One LED driver with 6’ cord, screws and a four way connector. • Ceiling opening is 2-1/8” • 2W LED Warm White* 180 lumens OUTSIDE DIAMETER

all products are u.s. and foreign patent pending

2-5/8”

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

153


led undercabinet lighting

led-em-204-p-pb-cw led-em-204-p-pb-ww

led-em-203w-wh-cw led-em-203w-wh-ww

Description: • Built w/ deep baffle technology for glare-free illumination • Relamps from the front • Ideal for cabinets where crisp white LED light is desired • Includes housing to be used with remote transformer • All die-cast construction • Ceiling opening is 2-5/16” • 2W LED Warm White* 100 lumens • Available in Warm White & Cool White Color Temperature

led-em-203sn-SN-cw led-em-203sn-SN-ww

FINISH

led-em-202p-SN-cw Gimbal (35 Tilt) led-em-202p-SN-ww Gimbal (350 Tilt) 0

SN satin nickel

wh White

ch chrome

pb polish brass

bk black

cp copper

*Must use with remote transformer (not provided). See pages 157

154

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


led undercabinet lighting

led-em-212cl-wh-cw led-em-212cl-wh-ww (Available with white trim only)

led-em-207w-wh-cw led-em-207w-wh-ww

Description: • Ideal for cabinets where crisp white LED light is desired • Includes housing to be used with remote transformer • All die-cast construction • Ceiling opening is 3-1/4”

led-em-206mb-bk-cw led-em-206mb-bk-ww

• 3W LED Warm White* 180 lumens • Available in Warm White & Cool White Color Temperature

led-em-206sn-sn-cw led-em-206sn-sn-ww

FINISH SN satin nickel

wh White

ch chrome

pb polish brass

bk black

cp copper

*Must use with remote transformer (not provided). See pages 157

all products are u.s. and foreign patent pending

led-em-208bk-cw led-em-208bk-ww

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

155


led undercabinet lighting led-em-223Sch-cw led-em-223Sbk-cw led-em-223Spb-cw

led-em-223Sch-ww led-em-223Sbk-ww led-em-223Spb-ww

• Ceiling opening is 2-5/16” • 2W LED Warm White* 100 lumens

Gimbal (350 Tilt)

led-em-222Sch-cw led-em-222Sbk-cw led-em-222Spb-cw

led-em-222Sch-ww led-em-222Sbk-ww led-em-222Spb-ww

• Ceiling opening is 2-5/16” • 2W LED Warm White* 100 lumens

Gimbal (350 Tilt)

led-em-225Sch-cw led-em-225Sbk-cw led-em-225Spb-cw

led-em-225Sch-ww led-em-225Sbk-ww led-em-225Spb-ww

• Ceiling opening is 2-5/16” • 2W LED Warm White* 100 lumens

Gimbal (350 Tilt)

led-em-228Sch-cw led-em-228Sbk-cw led-em-228Spb-cw led-em-228Sch-sbk-cw Gimbal (350 Tilt)

• Ceiling opening is 3-1/4” • 3W LED Warm White* 180 lumens

led-em-229Sch-cw led-em-229Sbk-cw led-em-229Spb-cw led-em-229Sch-sbk-cw Gimbal (350 Tilt)

led-em-228Sch-ww led-em-228Sbk-ww led-em-228Spb-ww led-em-228Sch-sbk-ww

led-em-229Sch-ww led-em-229Sbk-ww led-em-229Spb-ww led-em-229Sch-sbk-ww

• Ceiling opening is 3-1/4” • 3W LED Warm White* 180 lumens

Description: • Relamps from the front

• Machined Aircraft Aluminum Construction

• Ideal for cabinets where crisp white LED light is desired

• Available in Warm White & Cool White Color Temperature

• Includes housing to be used with remote transformer 156

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


electronic transformer for led undercabinet lighting ELV-50

ELV-75

Description: This quiet 50W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

Description: This quiet 75W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

3/4” 1-1/8”

3/4” 1-1/2”

2-3/8”

3”

specifications:

specifications:

input

120V 60Hz

output at max. load

11.5v 40kHz

Maximum load

50W

minimum load w/o dimmer

10w

minimum load with dimmer

20w

input current at maximum load

0.4a

output current at maximum load

4a

power factor min.

0.95

dimmable

available color:

black

input

120V 60Hz

output at max. load

11.5v 40kHz

Maximum load

75W

minimum load w/o dimmer

10w

minimum load with dimmer

20w

input current at maximum load

0.6a

output current at maximum load

6a

power factor min.

0.95

dimmable

available color:

black

ELV-60p

ELV-75p

Description: This quiet 60W-12V plug-in electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

Description: This quiet 75W-12V plug-in electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

1-1/4”

3/4” 1-1/2” 3”

1-5/8”

specifications:

1-3/4”

input

120V 60Hz

output at max. load

11.5v 40kHz

Maximum load

60W

minimum load w/o dimmer

20w

minimum load with dimmer

20w

input current at maximum load

0.5a

output current at maximum load

5a

power factor min.

0.95

dimmable

available colors:

black

white

all products are u.s. and foreign patent pending

specifications:

input

120V 60Hz

output at max. load

11.5v 40kHz

Maximum load

75W

minimum load w/o dimmer

20w

minimum load with dimmer

20w

input current at maximum load

0.6a

output current at maximum load

6a

power factor min.

0.95

dimmable

available colors:

black

white

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

157


158

www.iuseeliteLED.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

all products are u.s. and foreign patent pending


FLEXIBLE LED TAPE LIGHT SERIES The New Elite LED Tape Light is ideal for applications where space is

limited such as undercabinets, coves, and display cases. Its flexible design along with all the right connectors allow the Elite LED Tape Light to bend in any direction. Due to its unique design, it allows for uniformity of light and avoids shadowing. It is available in 16’ rolls and all the right colors for your application.

all products are u.s. and foreign patent pending

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

159


elite flexible single color led tape light

Features:

Electrical:

:: Pre-applied 3M tape allows for fast, hassle free installation

:: Elite LED tape light is offered with a 30W 12V driver (

:: Field cuttable every 2” or 3 LED’s.

LB100-DR-12V-30W) that can power 1 run up to 16’ or

:: Available in Warm White 3000K, Cool White 6500K, red,

a 60W 12V driver (LB100-DR-12V-60W) that can power

amber, Green, and Blue.

two runs at 16’ each run.

:: Low profile for discreet locations.

:: Maximum run of 16’.

:: Easy connectors allow for simple plug and play installation. :: UV rays and infrared wavelengths are non existent. :: Sold in 16’ rolls. :: Highly efficient 90 Lumens per watt for white LEDs. CAT#.

COLOR

VOLTAGE

CURRENT (mA)

POWER (W)

COLOR TEMP. VIEW ANGLE 0

LUMINOUS MIN

MAX

LED QTY PER ROLL

LB100-15F-RED

RED

12V DC

<400

<4.8

626 nm

140

135

165

300

LB100-15F-AMBER

AMBER

12V DC

<400

<4.8

590 nm

1400

81

99

300

0

LB100-15F-65K

COOL WHITE

12V DC

<400

<4.8

6500K

140

1250

1400 300

LB100-15F-30K

WARM WHITE

12V DC

<400

<4.8

3000K

1400

1400

1550 300

LB100-15F-GREEN

GREEN

12V DC

<400

<4.8

525 nm

140

124

152

300

LB100-15F-BLUE

BLUE

12V DC

<400

<4.8

470 nm

1400

43

53

300

Accessories:

0

Dimensions: 1000mm

LB100-ACC-3

Coupling

LB100-ACC-4

4” interconnector

LB100-ACC-8

4” Power interconnector

LB100-DR-12V-30W

30W Plug-in Driver

LB100-DR-12V-60W

60W Plug-in Driver

CUT 16.67mm 2.5mm

DESCRIPTION

0.5mm

CAT#.

(See page 164)

160

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

161


elite flexible RGB led tape light Features:

Electrical:

:: Pre-applied 3M tape allows for fast, hassle free installation.

:: Elite LED tape light is offered with a 30W 12V driver

:: Field cuttable every 2” or 3 LED’s.

( LB100-DR-12V-30W) that can power 1 run up to 16’

:: Low profile for discreet locations.

or a 60W 12V driver (LB100-DR-12V-60W) that can

:: Easy connectors allow for simple plug and play installation.

power two runs at 16’ each run. :: Elite LED color changing RGB tape light controller has

:: UV rays and infrared wavelengths are non existent.

11 different modes and can be controlled via a re-

:: Sold in 16’ rolls.

mote control device. (part number LB101 Controller). CAT#.

COLOR

LB101-15F-RGB

VOLTAGE

CURRENT (mA)

POWER (W)

VIEW ANGLE

LUMINOUS MIN

MAX

RED

12V DC

<200

22

26

GREEN

12V DC

<200

74

90

BLUE

12V DC

<200

13

17

RGB

12V DC

<600

<7.2

0

100

LED QTY PER ROLL

300

Dimension: 1000mm

CUT

0.5mm

2.5mm

0.5mm

33.3mm

Accessories: CAT#.

DESCRIPTION

LB101-ACC-3

Coupling

LB101-ACC-4

4” interconnector

LB101-ACC-8

4” Power interconnector

LB100-DR-12V-30W

30W Plug-in Driver

LB100-DR-12V-60W

60W Plug-in Driver

LB101-CONTROLLER

11 Mode RGB Controller

(See page 164)

162

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

163


elite flexible led tape light Accessories- Tape Light Series LB100-ACC-3 Coupling (Single Color)

LB101-ACC-3 RGB Coupling

LB100-ACC-4 4” Power interconnector (Single Color) /2

"

1"

2- 1

LB101-ACC-4 4” Power interconnector for RGB

5"

LB100-ACC-8 4” Power interconnector (Single Color) 4"

2- 1

1"

7-1/

LB101-ACC-8 4” Power interconnector for RGB

/2

"

32

1 -1

"

"

1"

8 -1

/2

5"

/ 2"

LB100-DR-12V-30W 30W Plug-in Driver

LB101-CONTROLLER 11 mode RGB controller

LB100-DR-12V-60W 60W Plug-in Driver

"

1"

7 -1 /4

dimmable compact led Ac 120V magnetic drivers

8 -1

/2

"

32

Approximate Sizes and Weight

Part#

Input(120V) Output(12V) Depth

Height

Width

eum-ac-12-40-120

1@40 watts

12V

2.14”

5.03”

2”

eum-ac-12-60-120

1@60 watts

12V

2.59”

6.06”

2.2”

eum-ac-12-100-120 1@100 watts

12V

2.59”

6.06”

2.2”

1 -1

"

/ 2"

dimmable compact led Ac 277V magnetic drivers Approximate Sizes and Weight

164

Part#

Input(277V) Output(12V) Depth

Height

Width

eum-ac-12-40-277

1@40 watts

12V

2.14”

5.03”

2”

eum-ac-12-60-277

1@60 watts

12V

2.59”

6.06”

2.2”

eum-ac-12-100-277 1@100 watts

12V

2.59”

6.06”

2.2”

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending

www.iuseeliteled.com â&#x20AC;˘ tel: 1-877-375-5555 â&#x20AC;˘ fax: 1-877-375-3333

165


elite led lighting - dimming matrix (15% dimming) Standard Incandescent Dimmers

(15% dimming) electronic low voltage Dimmers

• Requires minimum of 45 total system watts • 15% dimming

• Dimming control of any number of Elite LED or Module LED luminaires • 15% dimming

1

Lutron2 Ariadni AY/TG Series Ceana CN Series Centurion C Series Dalia DL Series Diva DV Series Glyder GL Series Lumea LG Series Lyneo LX Series Nova N Series Nova T NT/NTB/NTA Series Qoto Q Series Rotary D Series Skylark S Series

Lutron2 Diva DVELV Series Maestro MAELV Series Nova NLV Series Nova T NTELV & NTLV Series Skylark SELV Series Vierti VTELV Series Leviton Acenti ACE.Series (Electronic low voltage dimmer with low end programmable trim from control panel for dimming to less than 5%) Illumitech IPE.Series (Electronic low voltage dimmer with low end manual trim behind face plate for dimming to less than 5%) Vizia + VPE.Series (Electronic low voltage dimmer with low end programmable trim from control panel for dimming to less than 5%)

Leviton Illumitech IPI/RPI.Series Sureslide 663.Series

complete applications control options

(5% dimming) Incandescent Dimmers low compensating

residential LutroN* Homworks HW-RPM-4A-120 Remote Power Module-Adaptive Dimming HW-RPM-4V-120 Remote Power Module-Dimming HWD-5NE, HRD-5NE Wired Maestro and RF Maestro Local Controls

• Requires minimum of 45 total system watts • 5% dimming leviton Illumitech IP10/IP40/IPM406/IPM10 Series dimmers Acenti ACI/ACE/ACX/ATI Series (Programmable trim) Vizia + VPI/VPE/VPX.Series (Programmable trim)

commercial Lutron* Commercial Panel Systems LP-RPM-4A120 Remote Power Module - Adaptive Dimming

1 - Total system watts is the sum of luminaire wattages controlled by the switch. ie; 4 - 14w luminaires is 14 + 14 + 14 + 14 or 14 * 4 = 56 total watts.

transformer specification guide Total wattage of system EX: 56

= Lamp Wattage of luminaire

x number of luminiares

14

4

2 - Refer to Lutron “LED Product Report Card” for additional information. 166

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


alphabetical product index 22-OD-LED . . . . . . . . . . . . . . . . . . . . . . . 22 B25IC-LED . . . . . . . . . . . . . . . . . . . . . . 124 B25RIC-LED . . . . . . . . . . . . . . . . . . . . . 125 B26IC-LED . . . . . . . . . . . . . . . . . . . . . . 112 B26RIC-LED . . . . . . . . . . . . . . . . . . . . . 113 B5IC-LED . . . . . . . . . . . . . . . . . . . . . . . 116 B5RIC-LED . . . . . . . . . . . . . . . . . . . . . . 117 B6IC-LED . . . . . . . . . . . . . . . . . . . . . . . 100 B6RIC-LED . . . . . . . . . . . . . . . . . . . . . . 101 ELV-50 . . . . . . . . . . . . . . . . . . . . . . . . . 157 ELV-60P . . . . . . . . . . . . . . . . . . . . . . . . 157 ELV-75 . . . . . . . . . . . . . . . . . . . . . . . . . 157 ELV-75P . . . . . . . . . . . . . . . . . . . . . . . . 157 EUM-AC-12-100-120 . . . . . . . . . . . . . . 164 EUM-AC-12-100-277 . . . . . . . . . . . . . . 164 EUM-AC-12-40-120 . . . . . . . . . . . . . . . 164 EUM-AC-12-40-277 . . . . . . . . . . . . . . . 164 EUM-AC-12-50-120 . . . . . . . . . . . . . . . 164 EUM-AC-12-50-277 . . . . . . . . . . . . . . . 164 EUM-AC-12-60-120 . . . . . . . . . . . . . . . 164 EUM-AC-12-60-277 . . . . . . . . . . . . . . . 164 EUM-AC-24-100-120 . . . . . . . . . . . . . . 143 EUM-AC-24-100-277 . . . . . . . . . . . . . . 143 EUM-AC-24-40-120 . . . . . . . . . . . . . . . 143 EUM-AC-24-40-277 . . . . . . . . . . . . . . . 143 EUM-AC-24-50-120 . . . . . . . . . . . . . . . 143 EUM-AC-24-50-277 . . . . . . . . . . . . . . . 143 EUM-AC-24-60-120 . . . . . . . . . . . . . . . 143 EUM-AC-24-60-277 . . . . . . . . . . . . . . . 143 EUM-ELA-150-24 . . . . . . . . . . . . . . . . . 143 EUM-ELA-300-24 . . . . . . . . . . . . . . . . . 143 EUM-ELA-75-24 . . . . . . . . . . . . . . . . . . 143 EUM-EV24-150 . . . . . . . . . . . . . . . . . . . 143 EUM-EV24-200 . . . . . . . . . . . . . . . . . . . 143 EUM-EV24-300 . . . . . . . . . . . . . . . . . . . 143 EUM-LED . . . . . . . . . . . . . . . . . . . . . . . 141 EUM-LED-ACC-1 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-2 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-3 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-4 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-5 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-6 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-7 . . . . . . . . . . . . . . . . . . 143 EUM-LED-ACC-8 . . . . . . . . . . . . . . . . . . 143 EUM-LED-DRIVER-24W-24V . . . . . . . . . 143 EUM-LED-DRIVER-50W-24V . . . . . . . . . 143 EUM-LED-HW-12 . . . . . . . . . . . . . . . . . . 143 EUM-LED-HW-24 . . . . . . . . . . . . . . . . . . 143 EUM-ODX-1000 . . . . . . . . . . . . . . . . . . 143 EUM-ODX-1200S . . . . . . . . . . . . . . . . . 143

all products are u.s. and foreign patent pending

EUM-ODX-250S-24 . . . . . . . . . . . . . . . . 143 EUM-ODX-500 . . . . . . . . . . . . . . . . . . . 143 EUM-ODX-600S . . . . . . . . . . . . . . . . . . 143 EUM-ODX-750S-24 . . . . . . . . . . . . . . . . 143 EV24-150 . . . . . . . . . . . . . . . . . . . . . . . 147 EV24-200 . . . . . . . . . . . . . . . . . . . . . . . 147 EV24-300 . . . . . . . . . . . . . . . . . . . . . . . 147 EX-4101 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4102 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4107 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4109 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4110 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4111 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4112 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4113 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4114 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4115 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4118 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4119 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4121 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4122 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4123 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4124 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4125 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4127 . . . . . . . . . . . . . . . . . . . . . . . . . 57 EX-4601 . . . . . . . . . . . . . . . . . . . . . . . . . 61 EX-4607 . . . . . . . . . . . . . . . . . . . . . . . . . 61 EX-4614 . . . . . . . . . . . . . . . . . . . . . . . . . 61 EX-4615 . . . . . . . . . . . . . . . . . . . . . . . . . 61 EX4-LED . . . . . . . . . . . . . . . . . . . . . . . . . 56 EX4SQ-LED . . . . . . . . . . . . . . . . . . . . . . . 60 EX-6101 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6102 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6107 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6109 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6110 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6111 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6112 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6113 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6114 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6115 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6118 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6119 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6121 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6122 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6123 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6124 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6125 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6127 . . . . . . . . . . . . . . . . . . . . . . . . . 59 EX-6601 . . . . . . . . . . . . . . . . . . . . . . . . . 63

EX-6607 . . . . . . . . . . . . . . . . . . . . . . . . . 63 EX-6614 . . . . . . . . . . . . . . . . . . . . . . . . . 63 EX-6615 . . . . . . . . . . . . . . . . . . . . . . . . . 63 EX6-LED . . . . . . . . . . . . . . . . . . . . . . . . . 58 EX6SQ-LED . . . . . . . . . . . . . . . . . . . . . . . 62 H3IC-LED . . . . . . . . . . . . . . . . . . . . . . . . 51 H3-LED . . . . . . . . . . . . . . . . . . . . . . . . . . 50 H4IC-LED . . . . . . . . . . . . . . . . . . . . . . . . 47 H4-LED . . . . . . . . . . . . . . . . . . . . . . . . . . 46 H5IC-LED . . . . . . . . . . . . . . . . . . . . . . . . 44 H6IC-LED . . . . . . . . . . . . . . . . . . . . . . . . 40 HH4SQ-LED . . . . . . . . . . . . . . . . . . . . . . . 38 HV6-LED . . . . . . . . . . . . . . . . . . . . . . . . . 26 HV8-LED . . . . . . . . . . . . . . . . . . . . . . . . . 32 HVJ6-LED . . . . . . . . . . . . . . . . . . . . . . . . 27 HVJ8-LED . . . . . . . . . . . . . . . . . . . . . . . . 33 HVR6-LED . . . . . . . . . . . . . . . . . . . . . . . . 28 HVR8-LED . . . . . . . . . . . . . . . . . . . . . . . . 34 L501 . . . . . . . . . . . . . . . . . . . 45, 122, 127 L501L . . . . . . . . . . . . . . . . . . 45, 123, 127 L504 . . . . . . . . . . . . . . . . . . . 45, 122, 127 L504L . . . . . . . . . . . . . . . . . . 45, 123, 127 L505 . . . . . . . . . . . . . . . . . . . 45, 122, 127 L505L . . . . . . . . . . . . . . . . . . 45, 123, 127 L507 . . . . . . . . . . . . . . . . . . . . . . . . 45, 120 L508 . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 L511 . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 L530 . . . . . . . . . . . . . . . . . . . . . . . . 45, 118 L531 . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 L535 . . . . . . . . . . . . . . . . . . . . . . . . 45, 122 L536 . . . . . . . . . . . . . . . . . . . . . . . . 45, 122 L541 . . . . . . . . . . . . . . . . . . . . . . . . 45, 123 L542 . . . . . . . . . . . . . . . . . . . . . . . . 45, 123 L601 . . . . . . . . . . . . . . . . . . . 43, 108, 114 L601L . . . . . . . . . . . . . . . . . . 43, 108, 114 L605 . . . . . . . . . . . . . . . . . . . 43, 109, 114 L605L . . . . . . . . . . . . . . . . . . 43, 109, 114 L606 . . . . . . . . . . . . . . . . . . . 43, 109, 114 L606L . . . . . . . . . . . . . . . . . . 43, 109, 114 L607 . . . . . . . . . . . . . . . . . . . 42, 104, 105 L611 . . . . . . . . . . . . . . . . . . . . . . . . 42, 103 L612 . . . . . . . . . . . . . . . . . . . 43, 108, 114 L617 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 L631 . . . . . . . . . . . . . . . . . . . . . . . . 42, 102 L635 . . . . . . . . . . . . . . . . . . . . . . . . 42, 106 L636 . . . . . . . . . . . . . . . . . . . . . . . . 42, 106 L641 . . . . . . . . . . . . . . . . . . . . . . . . 43, 107 L642 . . . . . . . . . . . . . . . . . . . . . . . . 43, 107 L645 . . . . . . . . . . . . . . . . . . . 43, 108, 114 L648 . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

167


alphabetical product index L652 . . . . . . . . . . . . . . . . . . . 43, 108, 114 L656 . . . . . . . . . . . . . . . . . . . . . . . . 42, 106 L657 . . . . . . . . . . . . . . . . . . . . . . . . 43, 107 L658 . . . . . . . . . . . . . . . . . . . . . . . . 43, 107 L659 . . . . . . . . . . . . . . . . . . . . . . . . 43, 107 L661 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 L675 . . . . . . . . . . . . . . . . . . . . . . . . 43, 106 L676 . . . . . . . . . . . . . . . . . . . . . . . . 42, 106 L680 . . . . . . . . . . . . . . . . . . . 43, 111, 114 L681 . . . . . . . . . . . . . . . . . . . 43, 110, 114 L685 . . . . . . . . . . . . . . . . . . . 43, 111, 114 L687 . . . . . . . . . . . . . . . . . . . 43, 110, 114 L688 . . . . . . . . . . . . . . . . . . . 43, 111, 114 L689 . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 L696 . . . . . . . . . . . . . . . . . . . 43, 111, 114 LB100-15F-30K . . . . . . . . . . . . . . . . . . 160 LB100-15F-65K . . . . . . . . . . . . . . . . . . 160 LB100-15F-AMBER . . . . . . . . . . . . . . . . 160 LB100-15F-BLUE . . . . . . . . . . . . . . . . . 160 LB100-15F-GREEN . . . . . . . . . . . . . . . . 160 LB100-15F-RED . . . . . . . . . . . . . . . . . . 160 LB100-ACC-3 . . . . . . . . . . . . . . . . 160, 164 LB100-ACC-4 . . . . . . . . . . . . . . . . 160, 164 LB100-ACC-8 . . . . . . . . . . . . . . . . 160, 164 LB100-DR-12V-30W . . . . . . 160, 162, 164 LB100-DR-12V-60W . . . . . . 160, 162, 164 LB101-15F-RGB . . . . . . . . . . . . . . . . . . 162 LB101-ACC-3 . . . . . . . . . . . . . . . . 162, 164 LB101-ACC-4 . . . . . . . . . . . . . . . . 162, 164 LB101-ACC-8 . . . . . . . . . . . . . . . . 162, 164 LB101-CONTROLLER . . . . . . . . . . . 162, 164 LD4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 LD4IC-AT . . . . . . . . . . . . . . . . . . . . . . . . 94 LD4R-AT . . . . . . . . . . . . . . . . . . . . . . . . . 96 LD5IC-AT . . . . . . . . . . . . . . . . . . . . . . . . 86 LD5RIC-AT . . . . . . . . . . . . . . . . . . . . . . . 87 LD6IC-AT . . . . . . . . . . . . . . . . . . . . . . . . 76 LD6RIC-AT . . . . . . . . . . . . . . . . . . . . . . . 77 LED-1301 . . . . . . . . . . . . . . . . . . . . 52, 137 LED-1302 . . . . . . . . . . . . . . . 53, 138, 139 LED-1362 . . . . . . . . . . . . . . . . . . . . . . . 139 LED-1401 . . . . . . . . . . . . . . . . . . . . 48, 131 LED-1402 . . . . . . . . . . . . . . . 49, 132, 133 LED-1437 . . . . . . . . . . . . . . . . . . . . . . . 133 LED-1462 . . . . . . . . . . . . . . . . . . . . . . . 133 LED-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 135 LED-3-IC . . . . . . . . . . . . . . . . . . . . . . . . 134 LED-3-R . . . . . . . . . . . . . . . . . . . . . . . . 136 LED-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 129 LED-4601 . . . . . . . . . . . . . . . . . . . . . . . . 39

168

LED-4614 . . . . . . . . . . . . . . . . . . . . . . . . 39 LED-4615 . . . . . . . . . . . . . . . . . . . . . . . . 39 LED-4617 . . . . . . . . . . . . . . . . . . . . . . . . 39 LED-4-IC . . . . . . . . . . . . . . . . . . . . . . . . 128 LED-4-R . . . . . . . . . . . . . . . . . . . . . . . . 130 LED-6101 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6102 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6107 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6109 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6110 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6111 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6112 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6113 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6114 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6115 . . . . . . . . . . . . . . . . . . . . . . . . 30 LED-6121 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6122 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6123 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-6125 . . . . . . . . . . . . . . . . . . . . . . . . 31 LED-8101 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8102 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8107 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8109 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8110 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8111 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8112 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8113 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8114 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8115 . . . . . . . . . . . . . . . . . . . . . . . . 36 LED-8121 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8122 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8123 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-8125 . . . . . . . . . . . . . . . . . . . . . . . . 37 LED-EM-202 . . . . . . . . . . . . . . . . . . . . . 154 LED-EM-203 . . . . . . . . . . . . . . . . . . . . . 154 LED-EM-204 . . . . . . . . . . . . . . . . . . . . . 154 LED-EM-206 . . . . . . . . . . . . . . . . . . . . . 155 LED-EM-207 . . . . . . . . . . . . . . . . . . . . . 155 LED-EM-208 . . . . . . . . . . . . . . . . . . . . . 155 LED-EM-212 . . . . . . . . . . . . . . . . . . . . . 155 LED-EM-222 . . . . . . . . . . . . . . . . . . . . . 156 LED-EM-223 . . . . . . . . . . . . . . . . . . . . . 156 LED-EM-225 . . . . . . . . . . . . . . . . . . . . . 156 LED-EM-228 . . . . . . . . . . . . . . . . . . . . . 156 LED-EM-229 . . . . . . . . . . . . . . . . . . . . . 156 LED-HU-02 . . . . . . . . . . . . . . . . . . . . . . 152 LED-HU-03 . . . . . . . . . . . . . . . . . . . . . . 152 LED-HU-08 . . . . . . . . . . . . . . . . . . . . . . 152 LED-HU-14 . . . . . . . . . . . . . . . . . . . . . . 153 ODX-1000 . . . . . . . . . . . . . . . . . . . . . . . 147

ODX-1200S . . . . . . . . . . . . . . . . . . . . . . 147 ODX-250S-24 . . . . . . . . . . . . . . . . . . . . 147 ODX-500 . . . . . . . . . . . . . . . . . . . . . . . . 147 ODX-600S . . . . . . . . . . . . . . . . . . . . . . . 147 ODX-750S-24 . . . . . . . . . . . . . . . . . . . . 147 RL407 . . . . . . . . . . . . . . . . . 89, 91, 92, 93 RL430 . . . . . . . . . . . . . . . . . 88, 89, 90, 91 RL507 . . . . . . . . . . . . . . 79, 82, 83, 84, 85 RL530 . . . . . . . . . . . . . . . . . 78, 79, 80, 81 RL607 . . . . . . . . . . . . . . 69, 72, 73, 74, 75 RL630 . . . . . . . . . . . . . . . . . 68, 69, 70, 71 SE105-LED . . . . . . . . . . . . . . . . . . . . . . 151 SE106-LED . . . . . . . . . . . . . . . . . . . . . . 151 SE107-LED . . . . . . . . . . . . . . . . . . . . . . 151 SE841-LED . . . . . . . . . . . . . . . . . . . . . . 151 SL1-LED-CW-12 . . . . . . . . . . . . . . . . . . 147 SL1-LED-CW-24 . . . . . . . . . . . . . . . . . . 147 SL1-LED-SW-12 . . . . . . . . . . . . . . . . . . 147 SL1-LED-SW-24 . . . . . . . . . . . . . . . . . . 147 SL2-LC . . . . . . . . . . . . . . . . . . . . . . . . . 146 SL2-LED . . . . . . . . . . . . . . . . . . . . . . . . 145 SL2-LED-CW-12 . . . . . . . . . . . . . . . . . . 147 SL2-LED-CW-24 . . . . . . . . . . . . . . . . . . 147 SL2-LED-SW-12 . . . . . . . . . . . . . . . . . . 147 SL2-LED-SW-24 . . . . . . . . . . . . . . . . . . 147 SL2-MC . . . . . . . . . . . . . . . . . . . . . . . . 146 SL-LED-CL . . . . . . . . . . . . . . . . . . . . . . 146 SL-LED-EC . . . . . . . . . . . . . . . . . . 145, 146 SL-LED-JBC . . . . . . . . . . . . . . . . . 145, 146 SL-LED-SC . . . . . . . . . . . . . . . . . . . . . . 146 SL-LED-TB . . . . . . . . . . . . . . . . . . 145, 146 ST301 . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ST-301-LED . . . . . . . . . . . . . . . . . . . . . 150 ST302 . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ST-302-LED . . . . . . . . . . . . . . . . . . . . . 150 ST401 . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ST402 . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ST403 . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ST-4BX-LED . . . . . . . . . . . . . . . . . . . . . 150 ST701 . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ST702 . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ST703 . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ST-7BX-LED . . . . . . . . . . . . . . . . . . . . . 149 ST801 . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ST802 . . . . . . . . . . . . . . . . . . . . . . . . . . 149 ST-8BX-LED . . . . . . . . . . . . . . . . . . . . . 149

www.iuseeliteLED.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

all products are u.s. and foreign patent pending


sales agreement, terms and conditions General ACCEPTANCE/GOVERNING TERMS: These Terms and Conditions of Sale (“Agreement”) shall apply to all sales of products by Elite Lighting Inc., a corporation of the State of California. As used in these Terms and Conditions of Sale, “we” and “our” shall refer to Elite Lighting. Unless otherwise specifically agreed in writing by an authorized representative of Elite Lighting, any different or additional terms and conditions proposed by any customer in a purchase order, response to a quotation, or other proposal are hereby rejected by Elite Lighting and shall not be incorporated into the agreement for sale of Elite Lighting products. Customer’s assent to these Terms and Conditions of Sale shall be conclusively presumed from customer’s ordering products quoted by Elite Lighting, customer’s failure to object in writing to these Terms and Conditions of Sale, and/or customer’s acceptance of all or part of any products ordered. If Elite Lighting is found to have acknowledged customer’s order or proposal, and such acknowledgement constitutes an acceptance of an offer, such acceptance is expressly made conditional on customer’s assent solely to these Terms and Conditions of Sale, which shall form part of the acknowledgement, and acceptance by customer of any products shall be deemed to constitute such assent. If any quotation or other document of Elite Lighting is deemed to constitute an offer to customer, customer’s acceptance of such offer is limited to these Terms and Conditions of Sale. TERMS OF PAYMENT Terms Terms of payment for all of Elite Lighting products are as follows: All invoices must be paid within 30 days of invoice date. An additional fee of 2% per month or the highest lawful rate under applicable state law will be charged by Elite Lighting on all invoices which are past due. Should it be necessary for Elite Lighting to institute formal collection proceedings to collect any past due amounts from customer, Elite Lighting shall be entitled to recover its attorney’s fees and other costs associated with the proceedings. Notwithstanding the acceptance of any order by Elite Lighting, we reserve the right not to ship material to any customer not paying in accordance with our terms or who, in the sole opinion of Elite Lighting, may be unable to meet its payment obligations to Elite Lighting. FREIGHT TERMS Freight will be prepaid and allowed by Elite Lighting on any order totaling $2,000 or more within the limits of the continental United States. Orders not qualified for prepaid freight will be shipped with transportation charges prepaid by Elite Lighting and added to customer’s account, unless other method is requested by the customer. Partial shipments will be made at the discretion of the customer, provided the customer pays excess freight. When Elite Lighting bears the cost of shipment, we reserve the right to ship all orders in one complete shipment. Partial shipments may be made at our discretion. Elite Lighting will not be responsible for storage charges or cartage charges beyond the destination address acknowledged by Elite Lighting. All shipments will be made via carrier selected by Elite Lighting reserves the right to choose origin of shipment and routing. DIRECT SHIPMENTS Elite Lighting reserves the right to refuse the request of any distributor to make direct shipments of products to any destination outside the regular or assigned sales and service area of the distributor. MERCHANDISE AND CLAIMS TERMS Unless otherwise noted, sales of Elite Lighting Products will be F.O.B. factory. Title and risk of loss to all products shall pass from Elite Lighting to our customers upon execution of a bill of lading or tender of freight to carrier’s agent or customer’s agent, whichever shall first occur. When shipments of Elite Lighting products are to be made via company truck, title and risk of loss to the products shall pass to our customers at time of delivery to the final destination or to the forwarding carrier. All claims for loss or damage in transit must be made by customer to both the carrier and Elite Lighting within 5 working days. DATE OF SHIPMENT Shipping dates are approximate and are based on conditions existing at the time of Elite Lighting’s receipt of customer’s firm order and full information. Elite Lighting will in good faith endeavor to ship by the estimated shipping date but it shall not be responsible for any delay or any damage arising there from. RETURN MERCHANDISE TERMS No merchandise shall be returned by the customer without prior written consent and authorization in the form of a Return Goods Authorization (RGA), which has been issued by Elite Lighting expressly for the merchandise to be returned. This RGA will be issued at the sole discretion of Elite Lighting and must be requested by the customer within 90 days of the original shipment date. Returned merchandise must be in its original sealed cartons. All returned merchandise must be in salable condition in order to qualify for credit. No special products, nonstocking products, custom-made products, outdated or modified versions of cataloged factory stocking items may be returned by the customer. Except for products considered by Elite Lighting to be defective in workmanship or materials, all returns will be subject to a minimum 35% handling and factory inspection charge, and a deduction will be made for the freight expense of the original shipment. Merchandise accepted for return must be shipped prepaid to the factory or other destination specified by Elite Lighting. ORDER CANCELLATION TERMS Elite Lighting will accept order cancellations from customers only if the cancellations are sent to Elite Lighting in writing and received prior to shipment of the order. Verbal order cancellations will

all products are u.s. and foreign patent pending

not be accepted. Cancellation charges shall be those costs incurred by Elite Lighting, but not less than 10% of the value of an order. All costs for warehousing and freight on orders cancelled after shipment and/or refused at destination will be charged to the customer. Elite Lighting reserves the right to impose on the customer an additional charge of 25% of the value of an order if the order is cancelled after it has been processed for shipment. MINIMUM ORDER CHARGE A service charge of $20.00 will be added to all original customer orders, which total less than $100.00 net. PRICING Prices are subject to change without notice. Elite Lighting will ship merchandise at prices prevailing at the time of shipment. Prices are exclusive of sales, use, excise or similar taxes unless otherwise noted. STANDARD PACKAGE POLICY AND/OR “BROKEN CARTON” CHARGE Elite Lighting will ship the order as written, but it will apply a broken carton charge of $5.00 to each catalog number so ordered which is not in box quantity. SPECIFICATIONS Elite Lighting in no way, express or implied, accepts responsibility for voltage determination. Elite Lighting shall not be responsible for quotations of prices or specifications concerning non-catalogued products unless Elite Lighting confirms this to the customer in writing. Catalogued items are those listed in Elite Lighting’s current price sheets. Dimensions of fixtures color modifications are subject to change without notice. Unless specifically agreed by Elite Lighting in writing, we do not warrant compliance of our products with individual project specifications. ERRORS Typographical or clerical errors in quotation orders or acknowledgments are subject to correction. DIMENSIONS The dimensions in catalogs and price lists are normally accurate, but are not to be used for construction purposes. CHANGES IN PRODUCT DESIGN Elite Lighting reserves the right to change, discontinue or modify the design and construction of any of its products and to substitute material equal to or superior to that originally specified. Conditions of Sale WARRANTY AND OBLIGATIONS THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Elite Lighting warrants that products sold will, upon shipment, be free of defects of workmanship or material under normal and proper usage. Should any failure to conform to this warranty become apparent during the warranty period (in most cases three years after the date of shipment) Elite Lighting must be notified in writing. Elite Lighting is not responsible for labor costs in connection with the installation, removal or replacement of warranted products or for any consequential damages. Elite Lighting further reserves the right to refuse to honor the above warranty for any product(s) altered, improperly installed in application for which not intended. In no event and under no circumstances shall Elite Lighting be liable to the purchaser or to any other person for any indirect, special, consequential or incidental losses or damages including, without limitation, lost profits except to the extent that liability for personal injury or property damage may be imposed upon Elite Lighting by law. As used herein, the term “person” shall include, without limitation, any individual, sole proprietorship, partnership, corporation or other entity. This warranty does not apply to Elite Lighting products which have been altered or repaired outside of Elite Lighting’s factory or which have been subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty also does not apply to products not manufactured by Elite Lighting. Elite Lighting manufactures neither fluorescent ballasts, photoelectric controls nor lamps. Any warranty regarding such components is made by the manufacturer of the components, and customer shall direct all claims to the component manufacturer. LIMITATION OF LIABILITY IN NO EVENT SHALL ELITE LIGHTING BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE) NOR FOR LOST PROFITS; NOR SHALL THE LIABILITY OF ELITE LIGHTING FOR ANY CLAMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THIS AGREEMENT OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF THE PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF THE PRODUCTS. THIS LIMITATION OF LIABILITY SHALL APPLY TO ANY LIABILITY FOR DEFAULT UNDER OR IN CONNECTION WITH THE PRODUCTS, PARTS, OR SERVICES DELIVERED HEREUNDER WHETHER BASED ON WARRANTY, FAILURE OF OR DELAY IN DELIVERY, OR OTHERWISE.

www.iuseeliteled.com • tel: 1-877-375-5555 • fax: 1-877-375-3333

169


Leading the Way in LED Technology

all products are u.s. and foreign patent pending


all products are u.s. and foreign patent pending


back cover

2011 Elite LED Lighting Product Catalog  

2011 Elite LED by Elite Lighting Product Catalog

Read more
Read more
Similar to
Popular now
Just for you