Click http://www.guidechem.com/cas-501/501-53-1.html for suppliers of this product
Benzyl chloroformate (cas 501-53-1) MSDS 1. 1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product identifiers Product name
Product Number Brand CAS-No.
: : :
119938 Anonymous 501-53-1
Relevant identified uses of the substance or mixture and uses advised against Identified uses
Laboratory chemicals, Manufacture of substances
HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1B) Carcinogenicity (Category 1B) Specific target organ toxicity - single exposure (Category 3) Acute aquatic toxicity (Category 1) Chronic aquatic toxicity (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC May cause cancer. Causes burns. Irritating to respiratory system. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal word Hazard statement(s) H314 H335 H350 H410 Precautionary statement(s) P201 P261 P273 P280 P305 + P351 + P338 P310 Supplemental Hazard Statements
Danger Causes severe skin burns and eye damage. May cause respiratory irritation. May cause cancer. Very toxic to aquatic life with long lasting effects. Obtain special instructions before use. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/ protective clothing/ eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. none
Restricted to professional users.
According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R45 R34 R37 R50/53 S-phrase(s) S53 S26
May cause cancer. Causes burns. Irritating to respiratory system. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid exposure - obtain special instructions before use. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Avoid release to the environment. Refer to special instructions/ Safety data sheets.
S61 Restricted to professional users.
Other hazards Contact with water liberates toxic gas.
COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms
Z-Chloride Carbobenzoxy chloride
Formula Molecular Weight
C8H7ClO2 170,59 g/mol
Benzyl chloroformate CAS-No. EC-No. Index-No.
501-53-1 207-925-0 607-064-00-4
100-44-7 202-853-6 602-037-00-3
0,1 - 3 %
Benzyl chloride CAS-No. EC-No. Index-No.
FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed Nausea, Shock.
Indication of any immediate medical attention and special treatment needed no data available
FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Dry powder
Special hazards arising from the substance or mixture Carbon oxides, Hydrogen chloride gas, Phosgene
Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary.
Further information no data available
ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Do not flush with water. Keep in suitable, closed containers for disposal.
Reference to other sections For disposal see section 13.
HANDLING AND STORAGE Precautions for safe handling Avoid exposure - obtain special instructions before use.Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Never allow product to get in contact with water during storage. Recommended storage temperature: 2 - 8 째C Moisture sensitive. Heat sensitive. Over time, pressure may increase causing containers to burst
Specific end uses no data available
8. 8.1 8.2
EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Personal protective equipment Eye/face protection Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) Appearance b) Odour c) Odour Threshold
Form: liquid, clear Colour: light yellow pungent no data available
no data available
e) Melting point/freezing
Melting point/range: -18 째C
Initial boiling point and boiling range g) Flash point
152 °C 92 °C - closed cup
h) Evaporation rate no data available i) Flammability (solid, gas) no data available j) Upper/lower no data available flammability or explosive limits
k) Vapour pressure
95,809 hPa at 20 °C 195,065 hPa at 55 °C
l) Vapour density m) Relative density
5,89 - (Air = 1.0) 1,217 g/cm3 at 20 °C
n) Water solubility o) Partition coefficient: noctanol/water p) Autoignition temperature q) Decomposition temperature r) Viscosity
no data available no data available
s) Explosive properties
no data available
no data available
no data available no data available no data available
Other safety information no data available
10. STABILITY AND REACTIVITY 10.1 Reactivity Can violently decompose at elevated temperatures Contact with water liberates toxic gas.
10.2 Chemical stability To avoid thermal decomposition, do not overheat. Decomposes when moist.
10.3 Possibility of hazardous reactions May decompose on exposure to moist air or water.Reacts violently with water.
10.4 Conditions to avoid Heat, flames and sparks. Exposure to moisture. Do not heat over: 75° C
10.5 Incompatible materials no data available
10.6 Hazardous decomposition products Other decomposition products - no data available
11. TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity LD50 Oral - rat - 3.000 mg/kg LC50 Inhalation - rat - 4 h - 590 mg/m3
Skin corrosion/irritation no data available
Serious eye damage/eye irritation no data available
Respiratory or skin sensitization no data available
Germ cell mutagenicity no data available
Carcinogenicity Carcinogen IARC:
2A - Group 2A: Probably carcinogenic to humans (Benzyl chloride)
Reproductive toxicity no data available
Specific target organ toxicity - single exposure no data available
Specific target organ toxicity - repeated exposure no data available
Aspiration hazard no data available
Potential health effects Inhalation
May be fatal if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract. Harmful if swallowed. Causes burns. Harmful if absorbed through skin. Causes skin burns. Causes eye burns.
Ingestion Skin Eyes Signs and Symptoms of Exposure Nausea, Shock.
Additional Information RTECS: Not available
12. ECOLOGICAL INFORMATION 12.1 Toxicity no data available
12.2 Persistence and degradability no data available
12.3 Bioaccumulative potential no data available
12.4 Mobility in soil no data available
12.5 Results of PBT and vPvB assessment no data available
12.6 Other adverse effects no data available
13. DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods Product This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging Dispose of as unused product.
14. TRANSPORT INFORMATION 14.1 UN number ADR/RID: 1739
14.2 UN proper shipping name ADR/RID: BENZYL CHLOROFORMATE IMDG: BENZYL CHLOROFORMATE IATA: Benzyl chloroformate Passenger Aircraft: Not permitted for transport
14.3 Transport hazard class(es) ADR/RID: 8
IMDG Marine pollutant: yes
14.4 Packaging group ADR/RID: I
14.5 Environmental hazards ADR/RID: yes
14.6 Special precautions for user no data available
REGULATORY INFORMATION This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture no data available
15.2 Chemical Safety Assessment no data available
OTHER INFORMATION Further information The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information this document is based on the resent state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. guidechem shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale.
Published on Dec 6, 2013
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1B) Carcinogenicity (Category 1B) Specific ta...