Page 1

==== ==== For more information about computer network products please click this link. http://bit.ly/wHLCla ==== ====

While computer network repair is not something most beginning computer users want to tackle, there are a few things you can check that are common causes why your computer network won't work. Sometimes, checking simple things can make your network start working again. You might be able to isolate the problem, making computer repair less time-consuming, in the event you need an on-site computer network repair technician. Most of the time, networks will use Windows programs or SQL servers. The first thing to try is to re-boot the system. This means you need to turn off all the peripheral computers and the main computer or network server will need to be re-booted, (turned off and then turned back on). Don't forget to re-boot the router because sometimes, this will be your problem. After you have tried this approach, you might find the system will be working because sometimes, an electrical blip causes the network to have errors, when booting up. This process might take a few minutes. The next step for beginning computer repair is to check the cabling connections. Sometimes, a connection can work itself loose if you accidentally bump a component. If you have a red "X" in the system tray, this could be the problem. When you are narrowing down problems in computer network repair, a loose cable can be the problem many times. Usually, the next step in troubleshooting your repair will be to check the hardware and make sure there are not problems. You go to the "Control Panel", then "Device Manager" to see if there are any disabled network devices marked with a red "X". You might need to re-enable the device, if you see these signs. If there is no network device listed, you might have a problem with your network card. If these are not problems, the next step in the repair would be to perform the Windows Diagnostics. To perform the Windows Diagnostics, you go to the system tray in the lower right hand corner screen of the computer that needs repair. You will right-click on the red "X" that indicates no network connection and click on "Repair" or "Troubleshoot", depending on which version of software your system uses. This might clear up network problems, if software configuration problems exist. Avoiding computer network repair by an on-site technician can mean trying these simple steps. Sometimes, you can't avoid the need of an experienced computer network repair technician to help you, however. For this reason, there are some companies that have taken advantage of computer network repair support technicians that are on-call and they will often walk you through the steps we have just mentioned. The great thing about learning the basics of computer network repair is that you might be able to get your network working again very quickly without help. On the other hand, if you can't figure out what is wrong with these simple processes of computer repair, save the more complicated tasks for a person that is experienced in computer network repair and don't start


messing with system configurations or settings. This can make the computer network repair process take longer, and cause more problems than it solves.

Bayne Schulstad runs On-Site-Computer-Repair-Service.com, a web site dedicated to identifying computer repair needs and to finding quality on-site technicians to provide those repairs and services.

Article Source: http://EzineArticles.com/?expert=B_Schulstad

==== ==== For more information about computer network products please click this link. http://bit.ly/wHLCla ==== ====

Finding More Information About Computer Networks  

This is a very informative article about computer networks.

Read more
Read more
Similar to
Popular now
Just for you