Page 1

section

18

SEATS & ACCESSORIES

294 295-296 296 297 298 299 300 301 302 303-304 305-306 306 307 308

www.bla.com.au

SEATS & ACCESSORIES

Bench Seat Cushions, Stand-up Pro & Skipper Seats Quick Disconnect, Strata Mate & Skipper Seats First Mate & Crew Folding Seats Fully Upholstered Fold Down Seats Deluxe Upholstered, Deluxe Helm & Flip Back Seats Ocean & Pilot Bolster Seats Upholstered Helmsmans Seats Rotational Moulded & Blow Moulded Seats Bay & Argos Seats Seat Pedestals & Support System Table Pedestals & Seat Legs Seat Slides & Pedestal Tops Plug-In Pedestals & Hi-Lo System Seat Swivels & Tinnie Seat Mounts

293


section

SEATS & ACCESSORIES

18

Matching Seats, Pedestals, Slides and Swivels The seating products detailed in this catalogue have a variety of mount hole patterns. Matching seats with pedestal slides and swivels is an important consideration for safe, easy to install seating. The seat to pedestal, slide or swivel mount hole pattern for the majority of seats, pedestal slides and swivels detailed in this catalogue fall into two basic patterns, standard mount hole pattern and slide mount hole pattern. To simplify product selection we show mount hole pattern icons on all products that have these hole patterns. Some seats, pedestals and slides incorporate both these hole patterns, so as they can inter-fit with either hole pattern. These products are displayed with a combined icon-standard and slide mount hole pattern.

Standard & slide mount hole pattern

Standard mount hole pattern

Slide mount hole pattern

This is the most commonly used hole pattern for mounting marine seats. Pedestals, slides and swivels using this hole pattern have four slots in a cross pattern for screws up to 6mm (1/4") with centres between 128 and 144mm.

128 144

Slide mount hole pattern: This hole pattern is generally used on larger seats and those designed to accept a seat slide, and is the hole pattern of all pedestal mount seat slides listed in this catalogue. The hole pattern accommodates screws up to 6mm (1/4") with athwartship hole centres of 124 to 130mm and fore and aft hole centres of 296mm to 316mm.

296-316

124-130

Seat Cushions

Tinnie Seat Cushions

Ideal for cockpit and bench seats, these closed cell eva foam cushions turn any hard surface into comfortable seating. Easy to clean, will not absorb water. Textured finish.

Fully upholstered seat padding that press stud mounts onto tinnie bench seats. U.V. stabilised marine quality vinyl. High density foam padding. Blue with white trim. Includes studs and alloy pop rivets for mounting.

BLA Code 181028 181032

Length mm

Width mm

Thickness mm

990 1300

330 330

20 20

BLA Code 181040 181044 181046

Length mm

Width mm

Thickness mm

600 1200 1500

300 300 400

50 50 50

Stand-Up Pro Seat

Skipper Seat

Designed for lure casting or fly fishing in protected waterways. Used in conjunction with Hi-lo seating system (page 307). Moulded poly base covered with thick foam padding and marine grade vinyl. 1/4" UNC threaded inserts in base.

Two piece U.V. stabilised injection moulded seat with fold down back. Heavy gauge wall thickness. Ample base reinforcement rib’s and substantial screw attachments, coupled with a weather resistant material, have been combined to provide a tough seat that can handle permanent exposure in the marine environment. The deep rolled front edge and inherent flex properties reduce extended seating fatigue. Separately purchased padded upholstery sets are also available, refer next page. Grey stipple finish.

Standard mount hole pattern

294

Standard mount hole pattern:

Standard mount hole pattern

BLA Colour Height Width Depth Mount Code Screws mm mm mm UNC

BLA Height Height Width Depth Mount Code Up Folded Screws mm mm mm mm gauge

181047 Grey

181076 420

140

390

Quality marine equipment

290

1/4"

200

465

470

8-10


section

18

Quick Disconnect Swivel Seats Push up to release

Pull seat forward to remove

SEATS & ACCESSORIES

Australian made quick disconnect seat manufactured especially for the fisherman with car topper or tinnie, who wants big boat comfort with the convenience of a removable seat. The seat features a quick connect/disconnect 360º swivel that requires no lubrication and will not rust. Removal or connection of the seat is simply push on, or push release and slide off. The seat’s inherent flex properties absorb shock, reducing seating fatigue. It's weather resistant qualities assure long life in any marine environment. The fold down back allows this compact seat to store easily for transportation or when boat cover is applied. Additional quick disconnect swivel mounts are available for alternative seating positions, allowing the same seat to be used at several locations. Available as a plain non upholstered seat for super long durability, even in permanent exposure, or for those wanting added comfort, upholstered insert models are available. Separately purchased padded upholstery sets are also available. Not intended for pedestal mounting.

181006

181022

BLA Padded Vinyl Height Code Colour Up mm 181006 No 181020 Yes 181022 Yes

n/a Grey Blue

Height Width Depth Folded mm mm mm

455 455 455

220 220 220

465 465 465

470 470 470

Mount Screws mm 6 r/h 6 r/h 6 r/h

181016 Additional mount base

Strata Mate Seats

181020 172 172 Standard mount hole pattern

38

181016

- Upholstered

Budget priced padded seating. Single piece moulded polyshell in grey textured finish. Marine grade vinyl upholstered pad inserts for additional comfort. Australian made.

BLA Colour Height Width Depth Mount Code Screws mm mm mm gauge 181310 Grey 181312 Blue

430 430

Upholstery Sets

465 465

530 530

181312 181310

Standard mount hole pattern

10 10

- Skipper & Quick Disconnect

Vinyl upholstery seat and back cushions to suit the skipper seat shell 181076 and quick disconnect swivel seat shell 181006. No tools required for installation, simply press stud together.

181086

BLA Code

Upholstery Colour

181074 181084 181086 181083

Blue, light grey & white Blue & white Charcoal & grey Teal

181084

181074

181083

Seat not included

Skipper Seats - With Upholstered Pads Fold down, grey U.V. stabilised, injection moulded seat with deep rolled front edge for comfortable support. universal mounting pattern to suit most popular swivels and pedestals. Friction type lock down for seat back. Vinyl upholstered pad inserts on seat and back for added comfort. Welded feature upholstery seams. 181110

BLA Vinyl Height Code Colour Up mm 181110 181112 181114

Grey Blue Teal

450 450 450

Height Width Depth Folded mm mm mm 200 200 200

500 500 500

480 480 480

Mount Screws gauge 8 r/h 8 r/h 8 r/h

181112

Standard mount hole pattern

181114

www.bla.com.au

295


section

18

First Mate Seats

- Upholstered Pads

SEATS & ACCESSORIES

Compact padded seating. Single piece moulded polyshell in grey textured finish. Vinyl upholstered pad inserts for additional comfort.

181328

BLA Vinyl Height Width Depth Mount Code Colour Screws mm mm mm gauge 181328 Grey 181330 Blue

375 375

First Mate Seats

435 435

490 490

Standard mount hole pattern

8 r/h 8 r/h

181330

- Fully Upholstered

An economical fully upholstered seat. One piece moulded polyshell. Marine grade vinyl and foam padding. Upholstery has feature seamed centre panel.

181320

BLA Colour Height Width Depth Mount Code Screws mm mm mm gauge 181320 181322 181324 181326

Grey & charcoal Blue & white Grey & teal White

400 400 400 400

465 465 465 465

490 490 490 490

8 8 8 8

r/h r/h r/h r/h

181322

Standard mount hole pattern

181324

Crew Folding Seats Fold down low rise back rest. Available as shell only or with upholstered inserts. Thermo plastic mouldings with non corrosive hinge and mount fastenings. Press stud securing strap to hold seat back in down position. 181402

181400

BLA Shell Vinyl Code Colour Colour 181390 Grey 181400 Grey 181402 Grey

Height Up mm

n/a Grey Grey/charcoal

395 395 395

Height Width Depth Mount Folded Screws mm mm mm gauge 270 270 270

530 530 530

500 500 500

8 r/h 8 r/h 8 r/h

181390 Standard mount hole pattern

Strata Mate Seats Ergonomic support at an economical price. Comfortable, single piece moulded polypropylene shell in textured finish. Australian made.

BLA Colour Height Width Depth Mount Code Screws mm mm mm gauge 181300 Grey 181302 Blue

296

430 430

465 465

Quality marine equipment

530 530

10 10

181302

Standard mount hole pattern

181300


section

18

High back fold down seat

High impact resistant moulded plastic interior frame. Heavy duty marine grade light grey vinyl with feature seams, thick polyurethane foam padding, sturdy aluminium hinges, zinc plated staples and fastening’s combined with compact classic styling, to deliver a smart appearance seat at an economical price. Moulded in well nuts in base ensure secure fastening. Mount screws included.

Thick polyurethane foam padded high back folding seat, ideal for runabouts and small fishing boats. The high back design provides extra support to make long days on the water more comfortable. To ensure longevity, internal frames are heavy walled high impact resistant plastic and the base has moulded in well nuts for fastening security. Finished in two tone grey and charcoal marine grade vinyl. Aluminium hinges, zinc plated staples and fastenings. Mount screws included.

Standard mount hole pattern

BLA Code 181190

Standard mount hole pattern

Height Height Width Depth Mount Up Folded Screws mm mm mm mm UNC 450

300

410

BLA Code

460 1/4" r/h

181192

Height Height Width Depth Mount Up Folded Screws mm mm mm mm UNC 545

330

425

540 1/4" r/h

Premier Seats The premier seat is installed by leading boat manufacturers world wide. Detailed upholstery in marine grade vinyl with thick shaped foam padding. Moulded polypropylene chassis will not corrode, warp or absorb moisture. Hammer tone painted finish aluminium hinges are of a non pinch design, an important safety consideration when small children are on board. Stainless steel hinge fastenings and staples. Well nuts moulded 181200 in base for mount security. Stainless steel mount fastenings included.

SEATS & ACCESSORIES

Economy Fold Down Seat

181202

BLA Vinyl Code Colour

Height Height Width Depth Mount Up Folded Screws mm mm mm mm UNC

181200 Grey/charcoal 560 181202 Blue/white 560 181204 Grey/teal 560

290 290 290

435 435 435

500 1/4" r/h 500 1/4" r/h 500 1/4" r/h

181204 Standard & slide mount hole pattern

Navigator Seats Detailed upholstery and moulded foam padding, coupled with a deep contoured shell, have combined to produce a seat with a high level of comfort and aesthetic appeal, at a modest price. Tough injection moulded shell has an integral moulded pinch free hinge with self locking mechanism to hold the fold down back rest in the upright position.

Standard mount hole pattern

BLA Colour Code 181340 Black & grey 181342 Navy & off white

Height Height Width Depth Mount Up Folded Screws mm mm mm mm mm 455 455

335 335

450 450

550 550

6 r/h 6 r/h

181342 181340

www.bla.com.au

297


section

SEATS & ACCESSORIES

18

Deluxe Upholstered Seats Generously sized, weather/mildew resistant and finely finished in heavy duty marine vinyl. The deluxe upholstered seats feature sewn and welded seams, firm high density foam and corrosion resistant powder coated aluminium back supports. Separately purchased arm rests are available in matching frame and vinyl colours. Rigid moulded plastic back and base chassis with moulded in well nuts for secure mounting.

181488

Standard & slide mount hole pattern

BLA Vinyl Frame Height Width Width Depth Mount Code Colour Colour No Arms With Arms Screws mm mm mm mm UNC 181484 181488

White Blue

White Grey

485 485

490 490

730 730

620 620

1/4" r/h 1/4" r/h

181494 Optional arm rests, white vinyl, white frame 181498 Optional arm rests, blue vinyl, grey frame

181484

Deluxe Helm Chairs Solidly constructed helm seat for inshore or offshore use when mounted to an appropriate base or pedestal. Generously proportioned and padded with 100mm thick high density seat padding for comfort over long distances and rough conditions. Available with or without arm rests. Polished aluminium back and arm rest supports. Reinforced rigid plastic moulded base with four well nuts for solid fastening in standard mount hole pattern. Also accepts slide hole pattern.

BLA Arm Height Width Depth Code Rests mm mm mm 181502 No 181504 Yes

480 480

495 605

550 550

Mount Screws gauge 14 14

Standard & slide mount hole pattern

Flip Back Seat A fully upholstered seat with flip back rest for facing forward or backward seating positions. Ideal for multipurpose boats where forward travelling seating is required as well as back facing seating for observing lures, skiers, etc. The styling also allows side by side installation for twin or multiple bench style seating. Aluminium flip mechanism and U.V. stable weather resistant marine grade vinyl to withstand the elements.

BLA Height Code mm 181236 520

Width Depth mm mm 485

635

Slide mount hole pattern

Flip-up Seat A truly versatile seat particularly suited to sports cruisers and sport fishing boats. Flip back rest for forward and backward facing seating positions. Flip up seat bolster for seated or supported standing positions. Finished with heavy duty white marine grade vinyl over high density plush, comfortable foam padding.

BLA Height Code mm 181242 655

298

Width Depth mm mm 545

675

Quality marine equipment

Slide mount hole pattern

Two seats pictured side by side for illustration purposes only. Sold singly.


section

18

Ocean Seats

181214

181212

181210

BLA Description Height Width Depth Mount Code Screws mm mm mm gauge 181210 181212 181214 181218

Blue seat with white trim White seat with blue trim Black seat with white trim Shell with flip up mechanism

570 570 570 560

520 520 520 510

530 530 530 520

14 14 14 14

r/h r/h r/h r/h

Storage pouch

Slide mount hole pattern

SEATS & ACCESSORIES

Innovative fully upholstered seat, based on a rotationally moulded polyethylene shell, with marine grade heavy duty vinyl over plush foam padding. The front thigh support is hinged, allowing it to be flipped up, offering the helms person additional seating height or lean against standing support for greater visibility, comfort and safety. For additional storage a pouch with elasticised top is incorporated in the seat back. The shell and flip up mechanism may also be purchased separately for those wanting to custom upholster.

181218

Pilot Seats Luxuriously upholstered seats that provide optimum seating comfort. Front bolster flips up via parallel hinging for higher seating position, ideal when boat is climbing onto the plane, or for lean to support when it is necessary to stand and steer. Manufactured with a sturdy roto moulded polyethylene shell, alloy flip up mechanism and stainless steel fastenings for saltwater durability. The shell and flip up mechanism may also be purchased separately for those wanting to custom upholster. Pilot seats are available in two upholstery options, white marine grade vinyl or the latest look navy canvas. Canvas offers a number of unique points of difference including: • Canvas breathes so it feels more comfortable • Dark canvas exposed to hot sun does not burn on contact like vinyl • The Teflon coating repels water, dirt and oil • Canvas does not become slippery with water or perspiration

181224

181220

BLA Description Height Width Depth Mount Code Screws mm mm mm gauge 181220 Navy canvas seat with white trim 520 181224 White vinyl seat with navy trim 520

560 560

550 550

14 r/h 14 r/h

Slide mount hole pattern

www.bla.com.au

299


section

SEATS & ACCESSORIES

18

Hi Back Fold Down Seat - with Arm Rests

Medium Back Fold Down Seat

A fully padded high back folding seat ideal for inshore or offshore use. The moulded seat back and base coupled with deep upholstery provide excellent body support and comfort over long distances and for all conditions. Removable armrests provide additional comfort and stability when under way. Finished in attractive heavy duty marine grade white vinyl featuring sewn and welded seams with attached back storage pocket. The heavy duty plastic base includes four well nuts in standard hole mount pattern for secure and solid fastening.

A fully padded folding seat ideal for inshore or offshore use. Deep shaped upholstery provides excellent body support and comfort in all conditions and over long distances. Finished in attractive heavy duty marine grade white vinyl featuring sewn and welded seams with attached back storage pocket. The moulded seat back provides excellent support while the base includes four well nuts in standard hole mount pattern for secure and solid fastening.

Standard & slide mount hole pattern

BLA Code

Height mm

181914 690

Standard & slide mount hole pattern

Width Depth mm mm 550

BLA Code

Height mm

181354 590

580

Width Depth mm mm 500

500

Venus Fold Down Seats

Royalita Deluxe Pilot Chair

Padded folding seat with great aesthetic appeal suitable for a wide range of boating applications. Shaped upholstery provides excellent body support and comfort in all conditions and over long distances. Finished in heavy duty marine grade vinyl and available in two attractive colour combinations featuring sewn seams to suit almost any boat interior. The moulded seat back provides excellent support while the base includes four well nuts in standard hole mount pattern for secure and solid fastening.

A high quality luxuriously upholstered premium chair finished in a breathable Markilux fabric with attractive and stylish stitching highlights. Uses a sturdy internal roto moulded polyethylene shell for outstanding body support and comfort in all conditions. Features front flip up bolster for higher seating position and support while standing. Finished in comfortable yet hard wearing marine Markilux fabric covering plush deep foam padding. Markilux provides a number of unique qualities over vinyl, including: • Breathable so it feels more comfortable • Dark colours do not burn on contact • Does not become slippery with water or perspiration • Ability to include intricate stitching highlights BLA Code

Height mm

181230 780

Width Depth mm mm 560

630

Pedestal Mount Chair Slide Royalita pre-drilled pedestal mount with chair slide to suit 73mm O/D post. Powder coated cast alloy swivel pedestal top, extruded alloy slide track and front lever operated slide adjustment locking mechanism.

Standard & slide mount hole pattern

BLA Vinyl Colour Height Width Code mm mm 181348 White / Tan 500 490 181350 White / Charcoal 500 490

300

Quality marine equipment

Depth mm 380 380

Height Width Depth Mount BLA Holes Code mm mm mm mm 183005 265

332

95

8r/h


section

18

The Yachtsman Seat

Well built ladder back design helm chair for piloting in comfort. The luxuriously padded seat and back cushions with the contoured polypropylene arm rests minimises fatigue during a hard day on the water. Manufactured of U.V. stabilized polypropylene and anodized aluminium with a conveniently located grab handle moulded to the back of the chair. The cushion is securely snapped to the base and can be easily removed for cleaning. Generous dimensions provide comfortable seating for all size skippers. Available in white or grey. Use 183003 to mount seat to pedestals.

Specially designed for maximum seating area. Wide cupped seat with high arm rests, the Yachtsman allows complete freedom of movement no matter what your size. Cut-away sides provide ample leg movement. Durable rotationally moulded polyethylene shell supplied with fore and aft seat slide. Upholstery set, purchased separately, features marine grade vinyl, plush foam padding, heat seal channels and textilene mesh underliner to allow cushions to dry.

183003

Seat slide included

Slide mount hole pattern

BLA Code

Colour

181922 181924

White Grey

Height mm

Width mm

Depth mm

540 540

560 560

710 710

Mount Screws gauge 14r/h 14r/h

BLA Description Height Width Depth Code mm mm mm 181436 Seat shell & slide 440

183003 Mount adaptor plate - alloy

540

510

Mount Screws gauge 6 r/h

SEATS & ACCESSORIES

Deluxe Ladder Back Pilot Seats

181476 White upholstery set

Commodore Moulded Seat

Admiral Moulded Seat

Rotationally moulded in U.V. stable white polyethylene. The one piece hollow centre, double skin construction provides rigidity, insulates and has no sharp edges. Cut away arm rests allow ample leg room even for large crew. Separately purchased marine grade vinyl upholstery sets are available in white or grey. This seat has a slide mount hole pattern. If fitting without a slide, alloy mounting plate 183003 is available to install the Commodore seat onto most pedestals.

Rotationally moulded in U.V. stable white polyethylene. The one piece hollow centre, double skin construction, provides rigidity, insulates and has no sharp edges. Moulded in arm rests helps keep crew in the seat in rough weather. Moulded grab handle in back rest. Separately purchased marine grade vinyl upholstery sets are available for that little additional comfort. This seat has a slide mount hole pattern. If fitting without a slide, alloy mounting plate 183003 is available to install the Admiral seat onto most pedestals.

183003

183003

Slide mount hole pattern Slide mount hole pattern

BLA Description Height Width Depth Code mm mm mm 181440 Seat shell 475 520 181478 Cushion set - white 181480 Cushion set - grey 183003 Mount adaptor plate - alloy

550

Mount Screws gauge 14 r/h

BLA Description Height Width Depth Code mm mm mm 181444 Seat shell

430

480

500

Mount Screws gauge 14 r/h

181482 Cushion set - white 181483 Cushion set - grey 183003 Mount adaptor plate - alloy

www.bla.com.au

301


section

18

Bay Pedestal Seats

SEATS & ACCESSORIES

These upholstered helm seats are supplied ready to install into your favourite seating position. Package includes the Bay seat, upholstery set and Coastline adjustable height pedestal. Arm rests are available as an option. Features: • Tough blow moulded all weather seat shell • Marine grade upholstery • Anodised aluminium adjustable height pedestal • Lockable seat swivel • Sturdy 225mm diameter six bolt floor mount BLA Seat Vinyl Code Colour Colour

Overall Height mm

Sitting Width Depth Height mm mm mm

181360 Grey Off white & navy 810-990 400-580 181364 Off white Off white & navy 810-990 400-580

460 460

550 550

Mount Holes mm 6 c/s 6 c/s

Bay Seats The Bay seat range is based on a tough versatile blow moulded shell. A range of upholstery, arm rests and mount options enables the Bay seat to accommodate numerous marine seating requirements from a basic tinnie bench seat mounted shell, to a fully upholstered pedestal mounted helm chair. Generous base area with moulded in leg contours and high back support provide all day on water comfort. Grab handles incorporated in back rest. Eight zinc alloy well nuts moulded into base ensures reliable and secure mount fastening. Four stainless steel mount screws included. BLA Description Height Width Depth Mount Code Screws mm mm mm mm 181368 Shell only, grey 181370 Shell only, off white

480 480

460 460

550 550

6 r/h 6 r/h

Bay Seat Upholstery For additional comfort and styling, the Bay seat can be upholstered with this cushion set. Manufactured from marine grade vinyl, high density foam, nickel plated brass press studs and stainless steel screws, to ensure longevity in saltwater environment. Easy fitting and press stud removal for cleaning. BLA Vinyl Colour Code 181380

Off white and navy

Arm rests For that little extra comfort. Anodised aluminium one piece frame, with fitted eva foam tube padding and marine grade vinyl covers to colour match upholstery sets above. Stainless steel mount screws included.

Standard mount hole pattern

BLA Vinyl Width Fitted Code Colour mm 181386 Navy

Standard & slide mount hole pattern

550

Argos Seats Economical, single piece, U.V. stabilised polypropylene moulded seat. Non standard mount hole configuration. A swivel and a boat seat clamp with swivel are available with mount hole patterns to match these seats. Marine grade vinyl, full cover upholstery sets with foam padding are available separately. Seats and upholstery are Australian made. BLA Colour Height Width Depth Mount Code Screws mm mm mm gauge 181526 Grey 420 430 181528 Blue 420 430 181542 Swivel only for Argos seat

302

Quality marine equipment

440 440

10 10 Swivel only


section

Wave Master® Seat Support System

Gas operated adjustable height pedestals incorporating gas suspension ride. Heavy duty, anodised cast alloy base. Instantaneous gas locking height adjustment via a lift lever release and swivel chair slide. Suits most seat mount hole configurations. Outer post diameter 84mm, inner post 73mm.

The Wave Master® seat support system is designed to provide the ultimate in comfort and ride no matter what the conditions. Designed to reduce the amount of physical jarring that can be felt when a boat goes through waves. Precision manufactured from high grade aluminium this simple to install system becomes an integral part of any seat and pedestal. The Wave Master® seat support has been designed to fit most common 60mm and 75mm pedestal posts, be they grooved or straight extrusion. Supplied as a complete kit which includes an assortment of adaptor sleeves to accommodate most post variances. The Wave Master® seat support system adds an additional 75mm to the pedestal height and has a recommended 120kg maximum weight carrying capacity.

Standard & slide mount hole pattern

BLA Code 183038 183040

Height mm 380-508 530-690

18

SEATS & ACCESSORIES

Heavy Duty Gas Adjustable Pedestals

BLA Code

Gas adjustable Pedestals Gas operated adjustable height pedestals incorporating gas suspension ride. Heavy duty, anodised cast alloy base. Instantaneous gas locking height adjustment via a lift lever release. Supplied with either a swivel mount top or a swivel chair slide. Suits most seat mount hole configurations. Outer post diameter is 73mm, inner post is 60mm.

183174

Universal Seat Pedestals

Standard mount hole pattern

183006

Positive locking swivel and seat slide, operated by one unique control unit, positioned front and centre of seat, allowing finger tip control. This pedestal can be mounted on the port or starboard side of boat, with unrestricted access to all adjustables. Featuring 150mm of fore/aft travel with 360º rotation swivel with automatic locking in forward position. Materials: Natural, polished and hammer tone finished aluminium; stainless steel and plastics.

Slide seat mount hole pattern Slide mount hole pattern

BLA Code

183007

BLA Pedestal Top Height Code mm

Base Base Mount Dia. Holes mm mm

183006 183007

228 228

Swivel seat mount 370-505 Swivel chair slide 383-517

8c/s 8c/s

183030 183032 183033 183034

Height mm

Base Dia mm

Pedestal Dia mm

Seat Mount mm

Mount holes

315 470 570 650

228 228 228 228

73 73 73 73

330x185 330x185 330x185 330x185

8mm C/S 8mm C/S 8mm C/S 8mm C/S

www.bla.com.au

303


section

SEATS & ACCESSORIES

18

Columbia Adjustable Pedestal

Coastline Adjustable Pedestals

Adjustable height pedestal. Heavy duty cast alloy base with six mounting holes for solid support on cockpit or cabin floor. Anodised alloy post and base for corrosion protection. Simple friction locking height adjustment handle. Friction locking powder coated alloy swivel head assembly. Sturdy 73 x 4 mm base pole and 60 x 3 mm top pole with sleeved to accept 73mm ID swivel base.

Built for the salt water environment, anodised aluminium, glass filled nylon and stainless steel materials. Solid construction, 73 x 3mm base tube, 66 x 3mm top tube, both internally rib reinforced, heavy duty die cast alloy base and heavily reinforced glass nylon swivel head assembly. Mount base suits countersunk screws or hex head. Directly accepts 183080 seat slide.

Standard mount hole pattern

Standard mount hole pattern

BLA Height Code mm

Base Dia. mm

Base Mount Holes mm

183010 370-580 228 183022 Swivel top only

8 c/s

BLA Height Base Base Mount Code Dia. Holes mm mm mm 183070 340-510 225 183072 500-720 225

Columbia Fixed Pedestals

Coastline Fixed Pedestals

These popular pedestals have a heavy duty cast-aluminium base, with six mounting holes for solid support on cockpit or cabin floor. The post is 73mm in diameter and is fitted with a friction locking swivel. Anodised aluminium finish base and pole, powder coated cast alloy head assembly. Three heights available but can be easily cut down if a lower seating height is required.

Anodised aluminium base and pole with glass reinforced nylon locking swivel top for salt water application. Sturdy 73 x 3mm internal rib reinforced post. The swivel top is heavily reinforced and being nylon offers silent swivelling. Mount base accepts countersunk screws or hex head. Directly accepts 183080 seat slide. Available in four heights but pedestals can be easily cut down if a lower seating height is required.

Standard mount hole pattern

Standard mount hole pattern

BLA Height Code mm

Base Dia. mm

Base Mount Holes mm

183024 455 228 183026 610 228 183028 760 228 183022 Swivel top only

8 c/s 8 c/s 8 c/s

Belle Adjustable Pedestal Economical, adjustable height aluminium pedestal. Large diameter cast aluminium, grey hammer tone finish base with built-in trigger action height adjustment of 330 - 440mm. 360º friction locking swivel head in hammer tone finish cast alloy.

BLA Height Base Base Code Dia. Mount Holes mm mm mm 183060 183062 183064 183066

8 8 8 8

• Large 228mm diameter anodised cast aluminium base • 340-415mm Posi-lock height adjustment in 25mm increments • 360º friction lock cast alloy swivel head in hammer tone finish

Base Base Mount Dia. Holes mm mm

BLA Code

183014

254

183012

Quality marine equipment

225 225 225 225

c/s c/s c/s c/s

Adjustable height aluminium pedestal suited to a wide range of applications.

BLA Code

6 c/s

300 450 600 750

Posi-Lock Adjustable Seat Pedestal

Standard mount hole pattern

304

8 c/s 8 c/s


section

Thread-Lock Table Pedestals

Heavy duty gas operated adjustable height pedestal, with combination friction lock swivel mount top and lever operated slide providing 140mm of movement to convert dinettes into bunks. Instantaneous height adjustment via a simple friction lock handle. An excellent aid to raising a lowering heavier table tops. Telescopic centre tube requires 195mm clearance below floor. Outer post diameter is 86mm, inner post is 73mm. Heavy duty, 306mm diameter cast alloy anodised base.

Wobble free low profile threaded twist lock deck socket. No need to cut hole in deck to accommodate pedestal post. Sturdy 60mm anodised aluminium pole. Glass filled nylon table mount and choice of glass finished nylon or anodised aluminium floor base. A separately purchased plug 183194 is available to fill floor base when pedestal is removed.

18

183194 183192 base

BLA Height Base Mount Code Dia. Holes mm mm mm 183412 380-670 306

183190

BLA Base Height Code mm 183190 Nylon 183192 Alloy

8 c/s

685 685

Mount Dia. mm

Base Mount Height Holes mm mm

178 178

16 16

183194 Plastic base infill plug 183196 Additional alloy mount base

Removable Table Pedestal A simple, economical, stylish solution for free standing table installations.

Adjustable Table Pedestal

Features: • Sturdy 60mm anodised alloy tube • Glass filled nylon base and table mount • Recessed mount base • Press release lock top and bottom to securely fasten in all conditions but still allow the table to rotate

Used to convert dinettes into bunks. Height is adjustable via a simple friction locking handle. The telescopic centre tube retracts through the floor and requires 240mm clearance below the floor. Base and top plates are sturdy marine grade cast alloy and pedestal tube is spun aluminium. Anodised finish.

BLA Height Mount Base Base Mount Code Dia. Intrusion Protrusion Holes mm mm mm mm mm 183188 685

178

58

16

Button lock top and bottom keeps pedestal securely fastened in all conditions, but still allows table to rotate. Simply push release and remove post for convenient storage. Anodised aluminium pole, head and mount base. 762mm high from boat deck to top of table mount. Additional mount bases available separately to allow the pedestal table to be used in multiple locations such as dinnette and cockpit.

BLA Code

Base Intrusion Cut Mount Dia. Out Holes mm mm mm ø mm

183200 178 45 80 183202 Additional mount bases

6 c/s

BLA Height Base Mount Code Dia. Holes mm mm mm 183408 347-757 203

Stowable Table Pedestal

6 c/s

6 c/s 6 c/s

SEATS & ACCESSORIES

Gas Adjustable Table Pedestal

8 c/s

Coastline Adjustable Table Pedestal Built for the salt water environment with anodised aluminium, glass filled nylon and stainless steel materials. Solid construction, 73 x 3mm base tube, 66 x 3mm top tube, both internally rib reinforced, heavy duty die cast alloy base and heavily reinforced glass nylon swivel head assembly. Mount base suits countersunk screws or hex head. Used to convert dinettes into bunks. Height is adjustable via a simple friction locking handle. The telescopic centre tube retracts through the floor and requires 173mm clearance below the floor. Adjusts from 340–680mm above floor. BLA Code 183420

www.bla.com.au

305


section

SEATS & ACCESSORIES

18

Pedestal mount chair slides

Coastline Seat Slide

Two sizes available to suit pedestal poles with an outside diameter of either 60 or 73mm. Consists of a powder coated cast alloy swivel pedestal top with Delrin slides, extruded alloy slide track and front lever operated slide adjustment locking mechanism. Seat mount plate is pre drilled to accept most popular seat mount hole patterns, but can also be drilled to suit non standard seat mount hole patterns.

Fits directly to the Coastline and Coastline adjustable pedestals. Anodised aluminium and stainless steel materials to handle salt water. Sturdy 4mm thick extruded chassis. Front operated slide release lever moves with seat so it is always within reach. 110mm of travel in 10mm increments. Pre-drilled to suit most popular seat mount hole patterns, but can also be drilled to suit non standard seat mount hole patterns.

Standard & slide mount hole pattern

BLA Code 182104 182105

Post Width Depth Height Mount Dia. Holes mm mm mm mm mm 60 73

192 192

340 340

95 95

8r/h 8r/h

Standard & slide mount hole pattern

BLA Width Depth Height Mount Code Holes mm mm mm mm 183080

180

335

80

8 r/h

Universal Trac-Lock 2 Chair Slide

Universal Seat Slide & Lockable Swivel

Mounts between seat and flat mount surface, or pedestal top, to provide front lever operated fore and aft sliding of seat. 110mm of movement in 10mm increments. Extruded aluminium top and base channels, delrin slides and stainless steel lock hardware for corrosion free saltwater use.

Mounts between seat and flat mount surface with front lever slide control, as well as swivel capable with every Âź turn lock facility. Slide has 160mm travel with lock capability every 10mm. Slide is manufactured in aluminium and swivel is powder coated aluminium.

Standard pedestal mount hole pattern

Standard mount hole pattern

Standard & slide seat mount hole pattern

Standard & slide mount hole pattern

BLA Width Depth Height Mount Code Holes mm mm mm mm

BLA Width Depth Height Mount Code Holes mm mm mm mm

182102

182098

192

340

51

8r/h

192

340

60

Pedestal Post Swivel Tops

Fold Down Seat Legs

Grey hammer tone finish, cast alloy, friction locking swivel pedestal tops to suit either 60 or 73mm outside diameter tube. Moulded plastic cup insert between pedestal top and post for smooth swivel action. Screw adjustable friction control locks swivel at any position of rotation.

These fold down seat legs have an anodised, 22mm alloy tube with a black, U.V. stabilised, plastic hexagonal mounting base. Simple yet effective fold down mechanism firmly locks the seat leg in the down position.

8 r/h

c

b

a

183348

BLA Code 183179 183022

306

BLA a b c Mount Code Holes mm mm mm mm

Pole Depth Width Height Mount Dia. Holes mm mm mm mm mm 60 73

170 170

170 170

Quality marine equipment

85 85

8 r/h 8 r/h

Standard mount hole pattern

183350 340 74 183352 670 74 183348 Base only

77 77

5 c/s 5 c/s

183350


section

18

Plug-in Pedestals

The Hi-Lo Seating System is a two position pedestal system that allows a boat seat to be used in a high position for fishing and a low position while the boat is underway. Simply remove the pedestal and place the seat mount directly into the base socket for low seating position, insert pedestal for hi seating position.

The Plug-in pedestal system offers the most flexible seating position options of all pedestals available from BLA. Any number of seating positions can be chosen by the simple addition of the base of your choice. By offering three styles of pedestals, fixed, manual adjustable or gas adjustable, Plug-in caters for most individual requirements. Manufactured from a combination of aluminium, stainless steel and glass filled nylon. Plug-in ensures years of maintenance free performance.

The Hi-Lo System comprises of three pieces: • Pedestal seat mount • Pedestal post • Pedestal deck base

Plug-in Fixed Height Pedestals: To be used in conjunction with the Plug-in pedestal bases listed below. Posts recess into base by 53mm.

183110

Pedestal Seat Mounts • 360º rotation • 3º reclined seating position • Zinc plated • Optional spring suspension ride

Features: • Separate bases provide multiple seating positions and allow simple removal of pedestal to maximise cockpit space. • 60mm diameter pedestal post • Aluminium, stainless steel and plastic construction • 360˚ lockable friction swivel

BLA Spring Pin Code Dia. mm 183108 No 183110 Yes

19 19

Standard seat mount hole pattern

BLA Description Code

Hi-Lo Pedestal Posts

183160 183162 183164 183166 183150 183152 183154 183156 183179

Nylon top bush for smooth, silent, lube free swivel operation, anodised aluminium tube, stainless steel pin. Available in fixed height or adjustable height. BLA Height Code mm

Tube Dia. mm

Pin Dia. mm

183115 330 183117 380 183120 490-640

38 38 38

19 19 19

Swivel and post Swivel and post Swivel and post Swivel and post Post only Post only Post only Post only Swivel top only

438 516 668 819 415 493 645 796 –

Standard mount hole pattern

N.B. Pedestal posts sold separately for use with 182104 seat slide on page 306. 183115 183120

Plug-in Power Rise Pedestal System matched with Plug-in bases, this pedestal features gas operated height adjustment and air-ride comfort.

Hi-Lo Pedestal Deck Bases • Stainless steel or anodised alloy construction • Nylon bush for smooth, silent, lube free swivel operation

183123

BLA Size Intrusion Material Code mm mm 183123 177x177 183130 177x177

O/all Height mm

SEATS & ACCESSORIES

Hi-Lo Seating System

Mount Screws mm

Features: • Instantaneous height adjustment • Gas suspension ride • 6º angled seat position • 360º swivel Dimensions: • 60mm lower pedestal post • Post recesses into base by 53mm

62 Stainless Steel 6 c/s 62 Anodised alloy 6 c/s

Plug-in Pedestal Bases Grey hammer tone finish, or anodised aluminium bases that suit the range of plug-in pedestals. Glass filled nylon insert provides a flush surface when pedestals are not installed. Available in round or 'D' configurations. Anodised finish is recommended for saltwater applications.

BLA Code 183170

O/all Height mm 420-580

Standard mount hole pattern

Plug-in Adjustable Height Pedestal To be used in conjunction with the Plug-in pedestal bases. Post recesses into base by 53mm.

183183 183184

183180

BLA Shape Base Intrusion Mount Code Dimensions Holes mm mm mm 183180 Round 183182 'D' 183183 Round 183184 'D'

228 Ø 228x179 228 Ø 228x179

61 61 61 61

8 8 8 8

Finish

c/s Hammer Tone c/s Hammer Tone c/s Anodised c/s Anodised

Features: • Positive detent pin height adjustment • Removable for multiple seating positions • 60mm diameter pedestal post • 360˚ lockable friction swivel • Aluminium, stainless steel and plastic construction BLA Code 183172

O/all Height mm 370-560

Standard mount hole pattern

www.bla.com.au

307


section

SEATS & ACCESSORIES

18

Seat Swivels

Boat Seat Clamp on Swivel

360ยบ seat swivels available in stainless steel, PPG or corrosion resistant zinc coated steel. All swivels have nylon slide runners for silent smooth operation.

Ideal for tinnies, this seat swivel clamps via threaded rod and wingnut adjustment on most tinnie bench seats, enabling quick and easy fitment and removal for storage. Moulded plastic base to minimise marking of unpainted alloy bench seat. Clamp rods are zinc plated, black powder coated and have plastic coated ends to prevent marking of alloy bench seat. Clamp range adjusts to accommodate bench seats from 240 to 540mm in width.

182054

Standard mount hole pattern 182112 only 182056

Standard mount hole pattern

182058

BLA Material Width Depth Height Mount Code Holes mm mm mm mm 182054 182056 182058

Stainless steel Zinc coated PPG coated

175 175 176

175 175 176

32 32 22

8 r/h 8 r/h 8 r/h

BLA Code

Suits

182112

Standard seat mount hole pattern

Low Profile Seat Slide Ideal for ski boats and bass boats. Mounts directly to floor or seat box and to underside of seat. 160mm of roller bearing fore and aft travel with 9 self locking positions. 8mm x 28mm mount studs pressed into floor mount track. Stainless steel construction.

Locking Seat Swivels

b

360ยบ seat swivels that can be locked at 30ยบ intervals (12 positions) Corrosion resistant black PPG treated steel or stainless steel construction. Nylon slide runner for smooth silent operation. Release handle swivels with seat and extends 175mm from front of swivel for convenient under seat front operation. a

BLA Track Code Length mm 182106 305

a

b

mm

mm

280

74

Universal Removable Seat Base

182060

182062

Converts boat seats with standard mount hole pattern to 360ยบ swivel with quick disconnect. Corrosion proof construction of sturdy glass filled nylon. Additional mount bases are available so the same seat can be fitted at other locations on the boat. Ideal for car toppers by providing quick finger push removal of the seat. Not suited to pedestal mount.

Standard mount hole pattern

(B)

BLA Material Width Depth Height Mount Code Holes mm mm mm mm 182060 182062

308

(A)

PPG coated S/steel

190 190

Quality marine equipment

227 227

27 27

8 r/h 8 r/h

BLA Item Width Depth Height Mount Code Holes mm mm mm mm 182110 (A&B)

180

218

181016 (B) Additional mount base

48

6 r/h

Standard mount hole pattern

Section 18 - Seats & Accessories  

BLA Catalogue 2011