Page 1

B LA C KS P I R E SUPER COMPONENTS

2012 DER GUIDE INSTALLATION

*If you don’t understand the following please have your local BLACKSPIRE dealer complete the installation.* Loosen BOLT and turn counter clockwise 4X, Push BOLT head in to release the NUT and slide the TOP GUIDE up to remove

DER GUIDE should be clocked so that the FLAT BOTTOM EDGE of the SLIDER is within ±5° of parallel to the ground. (Between BLUE and RED line) GREEN – Parallel to ground, Ideal angle RED – +5°, 8”+ travel bikes BLUE – -5°, 6”- travel bikes

Remove forward BOLT from SLIDER, loosen rear BOLT Rotate the SLIDER clockwise to install/remove crank

TOP GUIDE and SLIDER must overlap chainring teeth as shown

Torque TOP GUIDE and SLIDER bolts to 1Nm

CHAINRING must be centered in TOP GUIDE

GOOD

BAD


B LA C KS P I R E SUPER COMPONENTS

2012 DER GUIDE INSTALLATION

# 1 2 3 4 5 6 7 8 9 10 11

Description Backplate/Guide Frame BEAVERTAIL SLIDER TOP GUIDE/Controller M5 Aluminum Nut 9mm (BLACK) M5 Aluminum Nut 7.5mm (GREY) BEAVERTAIL Bolt BEAVERTAIL Nut M5 x 14mm Socket Head Bolt M6 Flathead Bolt M6 Washer/Spacer

WARNING: Some lubricants contain mineral spirits that are extremely harmful to plastics! Do not use lubricants or degreasers that contain mineral spirits. These lubricants are approved for use with DER guide (USE ONLY LUBRICANTS LISTED BELOW): • TriFlow Regular (Drip Bottle ONLY) • Pedros Go! • Pedros SynLube • Finish Line Wet • White Lightning • Chain-L • Squirt • Dumond Tech These degreasers are approved for use with DER guide: • Pedros BIO Degreaser (Drip Bottle ONLY) • Finish Line Multi-Degreaser

DO NOT USE any of the following: • TriFlow DRY • Finish Line DRY • Prolink Progold • WD-40 • Loctite • Purple Extreme • Boeshield T-9

2012 der guide installation manual  
Read more
Read more
Similar to
Popular now
Just for you