Page 112

page 102-116 Cutting_Bindery 2011 1/04/11 12:14 AM Page 9

110

Cutting Accessories & Shear Bolts

CUTTING

Shear Bolts BBS104 Polar 76, EM, 78, X & ED Shear Bolt Alloy Shear Bolt. Main shank is 1.84” long below the head. It has a M12 thread. Included is a washer faced hex nut and steel roll pin. The roll pin is already installed in the head. The head measures 22mm dia x 9.5mm thick.

BBS106 Polar 80 EL Shear Bolt Steel Shear Bolt. It has a “D” style head, round with two wrench flats machined into iit. Main shank is 45mm long below the head. It has a M9 thread. Included is a washer faced hex nut.

BBS105 Polar 71 EL, CE, 72 EL, CE, CS & Power Max 28” Shear Bolt Steel Shear Bolt. Main shank is 45mm long below the head. It has a M8 thread. Included is a washer faced hex nut. Both the nut and the head measure 12mm across the flat.

BBS107 Polar 92 EMC II & 92 ED Shear Bolt Steel Shear Bolt. Main shank is 48mm long below the head. It has a M14 thread. Included is a washer faced hex nut. The nut easures 19mm across the flat. Also includes a steel roll pin installed into the head.

BBS108 Harris Seybold Shear Pin 2” dia by 4-13/16” long steel shear pin fits many Harris Seybold guillotines. It is supplied complete with insulated centre short out pin assembly. This trips out the machine by blowing a fuse when pin breaks during overload condition. This is to prevent the pull arm from cycling once the shear pin breaks apart.

BBS109 Standard Horizon Shear Bolt Alloy Shear Bolt. 6mm dia shear bolt is 42 mm long below the head.

BBS114 Early Model Polar 107 Shear Bolt BBS112 Itoh Robocut & Saber 116 Shear Bolt Alloy Steel shear bolt. Main shank on this grade 12.9 steel socket head cap screw shear bolt is 8 mm dia, except where undercut. It is 55 mm long below the head. It has a M8 thread and includes a zinc plated washer and elastic stop nut.

BBS201 Wohlenberg 115 Shear Bolt Alloy Steel shear bolt. Main shank is 16mm dia and is 50mm long below the head with a M16 thread. Main shank is crossed drilled for extra breaking load.These bolts have been tensile tested to within a break load of 3 %

Steel Shear Bolt. Main shank is 10 mm dia and 65 mm long below the head. It has a M10 thread and has a cross hole drilled through the shank at break point. Included isa hex nut as well as hex head that measures 17 mm across the flat. Please Note: Later Polar 107 use BB-S92 bolt

BBS202 Wohlenberg 137 Shear Bolt Alloy shear bolt. Main shank is 16mm dia and iis 50mm long below the head with a M16 thread. Main shank is crossed drilled for ectra breaking load. These bolts are tensile tested to within a break load of 3%.

*Brand names and trademarks published herein are registered trademarks of their respective companies. Birk & Blyme is not an authorised dealer for Polar, Harris & Wohlenberg products and do not offer genuine parts. Birk & Blyme supplies compatible high quality replacement parts.

B&B Head Office Australia

T: +61 2 9452 0222

F: +61 2 9972 7901

E: info@birk-blyme.com

W: birk-blyme.com

Profile for Jan Blyme

Birk & Blyme Bindery Catalogue 2011  

Birk & Blyme Bindery Catalogue 2011  

Profile for birkblyme
Advertisement