page 102-116 Cutting_Bindery 2011 1/04/11 12:14 AM Page 8
Cutting Accessories and Shear Bolts
Polar* Cutting Accessories Blade Shim Supports
Blade Back Up Bars
Bronze Guide Blocks
Air Jet Nozzles
Cutting Stick Retainer
False Clamp Pin
.... and more!
Shear Bolts BBS91 Polar 80 EL Shear Bolt It has a “D” style head, round with two wrench flats machined into it. Main shank is 45mm long below head with M9 thread. Included with bolt is a washer faced hex nut. BBS101 Polar 115 EMC & 155 Shear Bolt Alloy shear bolt. Main shank is 3-1/32” lond below head with a M20 thread. The head is 1-15/32” dia & is 15/32” thick. Head is crossed drilled for a roll pin which is supplied already installed in the head. Also includes M20 washer faced hex nut. BBS102 Polar 137 EMC II, MON, X, XT & ED Shear Bolt Alloy Shear Bolt. Main shank has a M16 thread and is 2.33” long below the head. Included is a washer faced hex nut. The head is 1.18” dia and 0.39” thick and has a flat on one side as shown.
BBS92 Polar 107 EL, ST, 115 EL, CE, EMC Shear Bolt Alloy shear bolt. Main shank is 12mm dia except where undercut. It is 65mm long below head with M12 x 1mm thread with a 17mm hex head. Included is hex nut. Please note: Some early 107 models us a smaller bolt see S114
BBS93 Polar 145El. 150EL, 150CE, 155CE & 155 EMC Shear Bolt Largest dia on shank is 14mm except where it is undercut. It is 80mm long below head with 14mm thread. Has a matching hex nut supplied. BBS103 Polar 115 EMC II & MON Shear Bolt Alloy Shear Bolt. Fits the pull arm. Main shank has a M16 thread and is 2.33” long below the head. Included is a washer faced hex nut. The head is 1.18” dia and 0.39” thick and has a flat on one side as shown.
*Brand names and trademarks published herein are registered trademarks of their respective companies.Birk & Blyme is not an authorised dealer for Polar, Horizon and Harris products and do not offer genuine parts. Birk & Blyme supplies compatible high quality replacement parts.
T: +45 3254 0400 F: +45 3254 0600
B&B Europe Denmark