5 Ways for Increasing Life and Productivity of Your Metal Saw Blades

Page 1

5 Ways for Increasing Life and Productivity of Your Metal Saw Blades Nowadays saws are prepare to offer users better accuracy, efficiency and strength, but these will not help to prevent saw blades from ruding prematurely. Using every time, your saw blades will rub down, lowering your long-term productivity. This rub can increase greatly if you engage in high-volume production. Additionally, constant maintenance of saw blades can consume much of your time and money. So by following these 5 guidelines you can improve the productivity of your saw blades.

Fix Saw Perfectly As sometimes you might be in a hurry and have fixed blade which is having less slanted then it will result in bad use of your saw blades. Fixing to the right position will help your blade to last for long. Fixing a saw blade also concerned with all the other portion or screw must be tightened properly, as loose blade often result in breakdown. You should also consider the position of your blades as some blades has one way teeth will rub fast your saw blades. Selection for Right Blade Choosing the correct blade for your job is almost very important. Depending on the project, the size of your blade, type of blade, or even the tooth pattern each in all can play a significant role in determining its lifespan of your blade. Correct saw blade also pertains to the material of the blade, which can include aluminum, steel or thinner steel. The right blade will ensure the best performance results possible for you. The best way is to consult with your supplier and discuss about right blade.

[Figure showing how to fix saw blade]


Secure Material You are Cutting You should secure the material which you want to cut, this may seem like common sense for any seasoned person, but this guideline is often overlooked. Avoid cutting corners for securing the material, in addition to preventing the material from draging or vibrating at place, securing can also reduce risk of having Injury from the blade. Extend Saw Blade Perfectly To reduce rubbing and obtain the best cutting results, make sure your blade is extended completely from the sea. For cleaner cuts, you need to keep your blade fully extended, well lubricated, and use a guide or a straight edge. Fully extended blades will work freely with a full motion while making cuts. Saw Must have Full Speed While making a cut your saw speed must be full so that it might get a perfect motion. You must “cut in” the blade; you can do this by maintaining the saw’s recommended band speed and cutting at half the normal rate. Once the blade made small cut in, you can start running the saw at full speed—this will ensure that the blade cuts through the material easily. Basically what people do is they throw their weight into the cut, this bad practice that leads to faster rubs on the blade. So maintaining a proper pressure on the blade is necessary, Save yourself and your saw a lot of stress by letting the saw blade do the work.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.