Issuu on Google+

03

#

E

TC

O SI E V

MA

pr

t u n e h t t S E s L K u C B T YOUR KNU

February 4 - 26, 2012

12, 16, 20, 58

XC LU

NO

g less.

wrench

ga Introducin

nythin a h it w d e t s on’t get bu D . n o t n u you can co

25% smaller swing arc - 90 teeth deliver an industrybest 4° swing arc to get to work in the tightest areas 40% faster engagement of the fastener without corner rounding Fast and easy direction changes with reversing lever 15° Knuckle Offset keeps you from busting your knuckles

tested standards; 's minimum

ble ANSI

*Up to dou

90

368.18

$

TOOTH

.

to B107.100

Get the job done more easily with box end that can be used to loosen or tighten many 6pt, 12pt, spline, torx, square and even fasteners rounded up to 50%

NEW

249.64

$

90

NEW

TOOTH

S9GRRCXLM10

S9GRRCXL7

10 PIECE 90 TOOTH EXTRA LONG METRIC REVERSIBLE RATCHETING WRENCH SET

7 PIECE 90 TOOTH EXTRA LONG SAE REVERSIBLE RATCHETING WRENCH SET

•• Includes sizes: 10mm - 19mm

•• Includes sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

72 TOOTH COMBINATION RATCHETING WRENCH SETS •• Get the job done faster with non-slip box end to apply more power and reduce fastener rounding ••72 gear teeth deliver 5° swing arc for working in tight spaces

155.14

$

S7GRCM12

72 TOOTH

12 PIECE 72 TOOTH METRIC COMBINATION RATCHETING WRENCH SET

•• Includes sizes: 8mm - 19mm

••15° Knuckle Offset keeps you from busting your knuckles •• Long lasting quality you can rely on with full polish and heat-treated high alloy steel

110.72

$

S7GRCM4

72 TOOTH

4 PIECE 72 TOOTH METRIC COMBINATION RATCHETING WRENCH SET

•• Includes sizes: 21mm, 22mm, 24mm, 25mm


Save 8%

NEW

SSB4

SUREGRIP SERPENTINE BELT TOOL

•• Jaws actuate to allow user to grab hold of the belt ••Long reach for use in tight spaces •• Belt will not slip from the jaws allowing easier installation of difficult serpentine belts

E

24.95

$

XC LU

WCS191

stranded conductor wire

•• Automatically adjusts to wire size

WIRE STRIPPER RECESSED AREAS

•• Adjustable strip length gage •• Built-in wire cutter •• Lightweight and easy to use

FTR630

44

.95

FUEL TANK LOCKING RING TOOL

NEW

•• Stout fuel tank lock ring tool to remove and install plastic rings without damage ••Channel design on body allows legs to adjust to fit a wide range of applications and keeps the drive centered •• Works on the new smaller GM serrated rings and traditional rings

$

MST8895

Save over 10% 10MM VALVE ADJUSTMENT TOOL

Larger capacity pliers specially designed for trucks HCPR30

••Designed to work on Honda/Acura and many other cars with 10mm jam nut valve adjustment screws •• 2-in-1 tool features window in the socket to easily view and hold the adjustment screw as the jam nut is tightened ••Handle pivots so the window is always visible

UNIVERSAL HOSE CLAMP PLIERS

90.95

$

44

$

O

•• Strips 22-12 gauge single or multiple

$

61.95

TC

SI E V

.95

MA

ENGINE service

Narrow profile can easily access limited and hard to reach areas

26

$

.95

•• Allows for extra reach removing and locking plastic and /or metal self-tightening hose clamps with diameter of 11/16" - 3" ••Pliers can be locked freeing up your hands and making your job easier and faster •• Double gear lock lever with wider and deeper gears for secure locking •• New cable adjuster and multiple gear lock provide accurate and secure locking for any clamp position between minimum and maximum range

Save over $5

Save 10%

HZ25799

••"Polydrive" cylinder head bolts are a unique fastener used on VW's & Audi's only •• 1/2" drive, bit length 130mm, overall length 168mm ••All cylinder head bolts are being replaced with these new bolts

2

w w w.matc otools.c om

SB598

SERPENTINE BELT TOOL

••Releases tension on serpentine belts with a spring loaded idler pulley •• Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes ••Includes 19mm socket for Honda and Toyota applications ••Comes with extension for hard-to-reach idler pulleys •• Tool includes: 13mm socket, 14mm socket, 15mm socket, 16mm socket 18mm socket, 19mm socket, 3/8" square drive and 1/2" square drive

68.95

$

Save over 8%

pr

VW/AUDI CYLINDER HEAD BOLT SOCKET


USER–

FRIENDLY

127.95

$

Save over $15

BPHSET5

5 PIECE BALL PEEN HAMMER SET

•• Features fiberglass handles & ergonomic grips for easy use and long life ••Includes: 8 oz., 16 oz., 24 oz., 32 oz., and 40 oz

58.95

$

Save nearly $5

DB45

IDPB24

45 OZ. DEAD BLOW HAMMER

•• One-piece construction with non-slip comfort grip, combined with the strength and safety of polyurethane, make this hammer a necessity for your toolbox ••Made in the USA •• Internal shot canister welded to handle rod •• Convex faces on heads are designed for maximum dead blow non-bounce action and are cut resistant

SB4910S

7

$ .95

SB4920S each

ONIX SAFETY GLASSES

••Lightweight frame and suspended lens design provide a perfect fit for a variety of users •• Adjustable nose piece provides 3 different angles ••Ratcheting temples provide different angles for perfect view and fit

24" INDEXING PRY BAR

•• Durable Patented locking flex head improves access and leverage over other fixed head pry bars ••Indexible to 180° •• Ribbed foot for better traction •• 14 locking positions

74.95

$

Save over $10

14

Locking Positions

199.95

$

Save over

$35

Built-in Squeegee

SLF4T

4 PIECE LADY FOOT PRY BAR SET

pr

•• "LadyFoot" prying head for easy insertion, strong grip and leverage ••End tapers to a point for aligning metal sheets, parts, etc •• Black oxide bodies with polished heads •• Includes sizes: 7" length, 5/16" body diameter 12" length, 7/16" body diameter 16" length, 9/16" body diameter 21" length, 3/4" body diameter

23.95

$ 70001

V7 BRUSH

Save 10%

••V-shaped electrostatic bristles sweep more effectively than traditional round bristles. Picks up fine particles such as dust, sand, pet hair, etc. •• The bristles are oil and acid resistant ••Use in a workshop to sweep away fluids, oil, metal shavings or wood shavings ••Built in squeegee to remove water from many surfaces

Indexible to 180° 3


Battery service

1

Rookie

Ideal for technicians just starting out.

1,100.00

$

NEW

219.95

$

Save over $10

MJS4500

MD1350

22AH BOOSTER PACK

•• 22amp hour battery provides the boost you are looking for! ••Flat platform housing provides a lower center of gravity adding stability helping to prevent the unit from being accidentally knocked over •• #2 Gauge 50" cables maximize the possibility of the unit being positioned on a flat surface while in use •• Easy to read battery indicators provide instant clear feedback as to the status of the battery •• Cigarette plug, DC Cord adapters included

PRO SCAN 2011 OBDII KIT

•• 2011 Domestic and Asian Coverage with 1000's of new vehicle-ECU combinations ••Coverage includes Body and Chassis systems, along with Engine Transmission ABS and Airbag •• OBDII Smart Cable •• As a technicians needs grow OBDI cables for both domestic and Asian can be added

NEW! NEW

.95

Save over $25

MJS5000

SOFT SIDED BOOSTER PACK

•• Compact design for easy storage at home or in shop ••Padded case provides impact protection for the battery and components •• Soft non-skid bottom keeps the booster pack from falling or shifting •• Soft bag material doesn't mar or scratch •• On/Off Switch keeps the pack on when in use or off to conserve energy

4

w w w.matc otools.c om

950.00

$

MD3500-136

2011 DOMESTIC/ASIAN 5.0 SOFTWARE BUNDLE WITH 4GB MEMORY CARD

•• This Software kit is needed when upgrading from system 2.0 or 3.0 ••The new software includes 12 500 new vehicle-ECU combinations 1271 systems and over 4000 new actuator and adjustment tests •• New Domestic 2011 model coverage for Ford, GM, Chrysler, Jeep and Saturn •• Asian coverage includes Toyota, Honda, Mazda, Nissan, Mitsubishi and additional OEMs ••Includes high speed compact flash card with New System 5.0 pre-loaded for ease of use •• New coverage includes 2011 models as well as new tests adjustments etc. for previous model years pr

209

$


Intermediate MD3500

New base kit at a great price.

DETERMINATOR 5.0 OBDII BASE KIT

2

••Contains 2011 Domestic/Asian & European 2010 software with 12,500 new vehicle-ECU combinations, 1,271 systems, and over 4,000 new actuator and adjustment tests •• 2 Year warranty with additional 1 year extended service plan for a total of (3) years of protection ••1 year of additional Domestic/Asian/European Software via Online Registration

775.00

$

NEW

NEW

MD3500-135

2011 DOMESTIC/ASIAN SYSTEM 5.0 SOFTWARE

••Minimum System 4.0 with 4GB Card Required for this upgrade •• New Domestic 2011 model coverage for Ford, GM, Chrysler, Jeep, and Saturn ••Asian coverage includes Toyota, Honda, Mazda, Nissan, Mitsubishi and additional OEMs ••New coverage includes 2011 models as well as new tests, adjustments, etc. for previous model years •• Coverage additions include 1000's of new tests vehicle-ECU combinations system tests and adjustments

NEW

3

2,250.00

$

Determinator Line-up The new 2011 Asian and domestic software with... • 12,500+ New vehicle-ECU Combinations. • 4,000 Actuator and Adjustment Tests •1,170 Systems

Master Tech Base kit plus all the accessories you need.

3,500.00

$

NEW

MD3500TPR

DETERMINATOR 5.0 TPR

pr

••Contains everything from the Base Kit (MD3500 above) plus the items listed below. ••2011 Domestic and Asian software with 11,000 new vehicle-ECU combinations, over 1,150 systems, and over 1,800 new actuator and adjustment tests •• TPR handheld and software included to service TPMS systems including OEM sensors as well as Shrader EZ Sensor and VDO Redi-Sensor ••2 year warranty with an additional 1 year extended service plan for 3 years of protection •• Includes 2010 European Software

5


131.95

$ MICSET4

Save over $10

4 PIECE OUTSIDE MICROMETER SET

•• Industrial Quality, Swiss style, with ratchet stop ••Carbide tipped •• 0.0001" Graduations •• Includes: ••0-1" Micrometer , 1-2" Micrometer, 2-3" Micrometer, 3-4" Micrometer

SFF2A

38

$

.95

30800

CV BOOT CLAMP PLIERS

••For all ear-type clamps, including late model GM FWD outboard CV joints •• Use with torque wrench on late-model GM units

SPILL FREE FUNNEL WITH GM ADAPTER

31.95

$

Save over 5%

•• Saves time and eliminated spills and mess ••Includes threaded cap and adapter for newer GM "threaded style" radiator openings •• Eliminates trapped air pockets which usually cause erratic cooling system and heater performance •• Controls the proper amount of coolant entering the system and enables unattended filling of the coolant system ••Four adapters fit most domestic and import cars and light trucks •• Angled neck allows use on radiator caps that are placed at an angle

OF147

GM 2.2L OIL FILTER SOCKET

9

$ .95 Save over 20%

•• Low-profile 32mm / 1-1/4" socket is specially designed for operating clearance ••Use 3/8" drive hand ratchet (not for use with an impact wrench) •• Removes and installs oil filters on 2.0L, 2.2L and 2.4L GM Ecotec engines

155.95

MTDC6

MST4517

•• Raised metal buttons offer a positive response ••Automatic off feature •• Range: 0-6" (0-150mm) •• Graduation: .0005" (0.01mm), Accuracy: 0.001 IN (0.03mm) ••Inch/mm conversion and zero-setting at any position

$

PREMIUM DIGITAL CALIPER 0-6"

Save over $20

7-TON PULLER/BEARING SEPARATOR

••Includes a Bearing Splitter with 4" capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom thread forcing screw •• Great set for tough jobs, up to 7-tons, larger applications, and greater reach 8" to 16" ••Use as a stand alone puller/bearing splitter set or as a compliment to the MST4518 version

85.95

$

Save over $10

70.95

$

Save nearly $10

SCP36PTB

1/2" 3 PIECE FLIP SOCKET SET

6

w w w.matc otools.c om

pr

•• 1/2" Drive impact flip sockets and extension ••6-point socket openings on both ends •• Contains: •• 3/4" x 13/16", 19 mm x 21 mm, & 1/2" x 3" Extension


TOP RATED TOOL The front chuck makes it easy to change out bits as compared to the older coil design. matcotools.com review from: mmyers417 Professional Mechanic, From: Clayton, NJ, USA

152.95

$

Matco has

Save over $35

MT1820A

1/4" AIR RATCHET

•• 35 ft.lb. maximum torque and 300 rpm free speed ••Unique head construction provides improved durability •• Low-profile forward/reverse control has a wide diameter for easy gripping and also eliminates accidentally changing directions in confined spaces •• Ergonomic coupling nut and handle ensure a comfortable grip

the Power You Need

164.95

$

Save over $30

SBDPM126TA

3/8" DRIVE 12 PIECE METRIC 6 POINT DEEP IMPACT SOCKET SET

•• Hi-Visibility laser markings help technicians identify sockets quickly ••Opti-Torque applies torque to fastener sides, not corners which allows more torque to fastener and longer life •• Counter-Torque distributes the torquing stress uniformly throughout the socket extending socket life •• Includes sizes: 8mm - 19mm

224.95

$

Save over $35

SE210

284.95

$

3/8" DRIVE IMPACT WRENCH

pr

•• Great size and power--one of the smallest most powerful 3/8" impacts available ••Rear handle exhaust directs air away from work •• Six Position Power Management control - 3 forward, 3 reverse •• Variable Speed Trigger •• Special motor design for extra power in reverse •• Comfortable rubber grip for better control ••Working Torque:  25-180 ft.lbs •• Ultimate Torque:  250 ft.lbs

MT1815K

Save nearly $50

LONG BARREL AIR HAMMER KIT

•• Features integrated chuck air hammer with some of the most popular Matco chisel blades ••All contents contained in blow mold case

Power tools and accessories

7


337.95

$

SAUM116RB

1/4" DRIVE 11 PIECE METRIC 6 POINT UNIVERSAL CHROME SOCKET SET

Save over $45

•• Opti-Torque feature applies torque to fastener sides, not corners, while Counter-Torque helps distribute the torquing stress uniformly throughout the socket ••S2 tool steel pin increases strength of universal joint •• Includes sizes: 5.5mm, 6mm - 15mm

Buy EITHER

8

•• Mid-length chrome sockets with high-visibility color-impregnated laser etched markings ••Blue for metric, red for SAE so technicians can spot the right size instantly and work more efficiently •• Opti-Torque feature applies torque to fastener sides, not corners, while CounterTorque helps distribute the torquing stress uniformly throughout the socket •• Manufactured from high-grade, impact resistant, heat-treated steel

GET THIS FREE

SBIM126T

168.85

$

3/8" DRIVE 12 PIECE METRIC 6 POINT MID-LENGTH CHROME SOCKET SET

•• Includes sizes: 8mm - 19mm

SBI106T

149.50

$

3/8" DRIVE 10 PIECE SAE 6 POINT MID-LENGTH CHROME SOCKET SET

•• Includes sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

BFR118T

BFR118T

100.55 value

$

3/8" DRIVE 11" 88 TOOTH RATCHET

•• 88 ratchet gear teeth produce a swing arc just over 4° allowing faster work in the most compact spaces

136.95

$

Save over $15

99.95

$ SBC6TXA

3/8" & 1/2" DRIVE 6 PIECE TORX BIT DRIVER SET

•• Set of larger Torx drivers ••Includes 3/8" Drive: T30, T40, T45, T50, T55, & 1/2" Drive T60

SBXK5T

Save over $10

3/8" DRIVE 5 PIECE EXTENSIONS SET

•• Chrome extensions are full polished ••Extensions clearly marked for identification •• The 3" through 10" extensions have a knurled shank •• Plastic trays with a locking lid ••Includes sizes: 1", 3", 6", 8", & 10" w w w.matc otools.c om

pr

Socket, Extension, & Torx Bit Driver Sets

SBIM126T OR SBI106T


Rugged Tools, Smooth Deals Buy THIS BR11T

13

Locking positions provides access to get the tough jobs done

BR11T

3/8" DRIVE RATCHET

•• Overall length 11"

88.80

$

11"

Matco Ratchets

•• 36 Gear Teeth provide a minimal 10° swing arc ••Tear drop design provides greater access •• Closed head minimizes dirt infiltration ••Recessed shift lever to prevent accidental shifting •• Ergonomic handle contour provides a strong yet comfortable grip

299.95

$

Save over $80

SRBIXLM62T

6 PIECE METRIC 12 POINT EXTRA LONG DOUBLE INDEXING RATCHETING WRENCH SET

••13 locking positions provides access to get the tough jobs done •• 0° offset box end and index ratcheting end ••Ratcheting box-end has a swing arc of just 5° to help reach tight into spots ••Includes sizes: 8X10mm, 11X12mm, 13X14mm, 15X16mm, 17X18mm, & 19X21mm

10.95 each

$

Save over 15%

SG81P2B - green SO81P2B - Orange SR81P2B - Red

1/4" X 1" STUBBY PHILLIPS P2

pr

•• Top Torque II™ handle technology with more turning power •• Small stubby Top Torque 2 handle, small blade for precision, delicate work

GET THIS FREE AR8T

8"

AR8T

1/4" DRIVE RATCHET

•• Overall length 8"

65.15 value

$

ANGLE MEASUREMENT ETWB100F 3/8" DRIVE ELECTRONIC TORQUE WRENCH WITH ANGLE •• Angle measurement eliminates the need for angle meters needed for applications specified by manufacturers •• Four easy to understand & use function buttons with buzzer and color Save over $50 coded lights to alert when target torque is achieved •• Easy to read lighted LED display allows operator to view torque and then angle •• Quickly converts units automatically •• Features 60 tooth fine tooth mechanism that requires a small 6° swing arc •• +/- 2% clockwise accuracy, +/- 3% counterclockwise accuracy from 10% to 100% of 100 ft. lbs. capacity

396.95

$

9


OT MATC

OOL S

COL

L ES & L EC T I B

APPAR

EL

Tough, long-lasting work clothes

DICKIES WORK SHIRT

•• Khaki long-sleeve Dickie's work shirt has two front button pockets ••Perfect for the shop •• Embroidered Matco Tools logo on the left chest •• 65% polyester, 35% cotton

PDMCS26M PDMCS26L PDMCS26XL PDMCS26XXL

23

$

.95

PDMCS26XXXL

M L XL XXL XXXL

$71.95 $71.95 $71.95 $74.95 $76.95

PDMC226

MAVERIC CAP

•• Classic red and white stripes with Matco Tools embroidered on the front ••Matco Tools Hex on the back •• Velcro closure

TOP HAT MAN HOODY

43.95

$

PDNV25

TOP HAT MAN ZIPPO®

•• Chrome Matco Tools lighter has everything you would expect from Zippo® in quality and style

••Top Hat Man is now available in a gray hooded sweat •• 100% cotton

PDMS11M PDMS11XL PDMS11XL PDMS11XXL PDMS11XXXL

M L XL XXL XXXL

$52.95 $52.95 $52.95 $56.95 $62.95

34.95

$

PDRNV2

RAT FINK 4 PIECE MUG SET

10

w w w.matc otool s.c om

pr

•• Great for any Rat Fink collector and for everyday use ••16oz. black ceramic mugs


WHEEL WEIGHT TOOL with Hook Arrangement and Cutter

40

$

.95

Save over 5%

MST40A

WHEEL WEIGHT TOOL

•• Services "Clip-On" wheel weights ••Plastic hammer head cap •• Hook arrangement and cutter

Versatility+Portability. Can also be used as a flashlight.

2-in-1 RECHARGEABLE 26 LED WORK LIGHT Powerful two-in-one light Offers a 26 LED work light & a 17 LED torch/flashlight

61.95 Save 8%

Hands-free use 360º swivel hook for hands-free use and can be used in industry, homes, workshops, and garages

Portable Includes built-in rechargeable Ni-Mh. Includes 12V vehicle charger

TOP RATED TOOL Holds charge for long use, resists breaking when dropped... Professional Mechanic from Manassas, VA, USA

TOP RATED TOOL

Read the full review plus additional reviews online at www.matcotools.com

4.8/5 on MSCL440-BK as of 12/27/11

FULL SIZE, 2 DRAWER

Two 11.75" magnets with "quick release" handles are positioned on the lid for convenient storage

MUSCLE CART Top tray organizer has two cup holders, pen & pencil holder, random small parts cut away along with 1/4" & 3/8" socket holders. Single hand operated "quick release" gas pistons allow for the cart to transition into a convertible in a matter of seconds!

Bi-molded push handle provides the comfort of a steering wheel

Hood scoop not only looks cool but has a functional purpose as well: the interior recess allows for tools to be stored on the lid without sacrificing any top tray storage!

SAVE

$17485

799.95

$

MSCL440-O - Orange MSCL440-BL - Blue MSCL440-bk - Black MSCL440-R - Red

Comes with two drawers with full extension rollers. Customize your Muscle Cart by adding additional drawers and trays available separately

Bungee cords on the doors maximize lockable storage space

Internal prybar and screwdriver racks can hold up to 4 of your most frequently used 36" prybars

Tools not included.

pr

M26LED

$

Doors swing open 270° and are held in the open & closed position by magnets 11


JS3T

2 RATCHET STYLE JACK STANDS - 3 TON

•• Welded steel construction for superior safety strength ••Multi-position ductile ratchet bar with quick adjustment mechanism for ease of use

253.95

$

3 Ton $ 52.95

Save over $30

NEW

Simple & Easy New & Improved Drive Tool

Save 15%

675TD

Extra long low side frames designed for long reach under car chassis

75 PIECE TAP AND DIE SET

•• A wide selection of fractional and metric taps and dies, plus a full complement of die stocks, tap wrenches and other accessories ••New and Improved Drive Tool •• 5/8" and 1" hexagon dies •• Taps and dies for 17 metric and 17 fractional sizes

394.99

$

Save over $50

LPSJ2T

2 TON LOW-PROFILE SERVICE JACK

•• Universal joint release mechanism provides precision control of load descent in any handle position ••Wide stance and low center of gravity provides optimum stability under load stress •• Breather plug takes way air in the hydraulic system, optimizing jack performance

PR0312red

The products on Matco’s National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.

JOIN US ON

FACEBOOK

facebook.com/matcotools


Matco Tools Promo #3