Issuu on Google+

Phone: 800 805 1516

revised 5/8/12

Fax: 949 722 8370

Ride Engineering 2012 Accessory Catalog 2012 Off-road Oversized Rotor Kits…...…….……..……………………page 1 Billet Caliper & Front Brake Lines..……………….....page 2-4 Brake Accessories……………………………….……..page 4-6 Mini Brake Lines & Rear Brake Lines…………….……page 7 Bar Mounts………….…….………………………………..page 8 YZ & CR Triple Clamps……………...……………………page 9 KX; KTM & RM Triple Clamps & Stabilizer Mounts...page 10 Suspension Links…………………..…………..…..…….page 11 Engine………………...……………………………...……..page 12 Controls…………………………………………..….…......page 13 Wheel Accessories………………...….….………….…...page 14 Promotional Items……………..…..…………….….…....page 15

2012 Sport Bike R1/R6--WR250X/R--FZ1/FZ8--Fender Eliminators…………page 1sb CBR600RR/1000RR--Fender Eliminators ………………..…page 2sb GSXR600/750--GSXR1000-- SV650/1000--Fender Elim..….page 3sb ZX6/ZX10--Ninja 250 Fender Eliminators…..…………….….page 4sb Tank protector--Oil Caps & Axle Blocks………………........page 5sb RIDE ENGINEERING/ROCKSTAR/YAMAHA-RYAN SIPES


Page 1

BRAKE ACCESSORIES

270mm Oversized Rotor Kits Ride Eng. has added Over-sized Rotor Kits to our list of high quality performance products. We chose the Galfer Wave Rotor because it’s made of a particular stainless/iron alloy that all the factory teams have raced with at one time or another (not all aftermarket discs are made of the proper blend of iron and stainless steel for optimum braking performance). This full floating system is made to last and offers approximately a 20% increase in stopping power. Weighing in about 4oz more than the stock non-floating rotor with no additional weight added by our precision machined hanger bracket.

Appl: 2006-2012 KX250F/450F & 2007-2011 KLX450R Appl: 2007-2012 YZ250F & 2008-2012 YZ450F Appl: 2004-2012 CR125/250/250F/450F/250X/450X Appl: 2006-2012 RM450Z; 2007-2012 RM250Z

Phone 800 805 1516

Rideng.

Ride Engineering LLC

KX-00270-KT YZ-00270-KT CR-00270-KT RM-00270-KT

$274.95 $274.95 $274.95 $274.95

www.ride-engineering.com


Page 2

BRAKE ACCESSORIES

NEW! Billet Front Brake Caliper This new product from Ride Engineering helps increase stopping power while providing more of a direct feel between the rider’s input and front tire traction. We’ve achieved this with larger pistons, reducing flex and providing large fins for better cooling. Works great with stock rotor (must use billet hanger bracket below) or can be combined with 270mm oversized rotor kit for factory stopping power. Appl: ’04-’12 CR125/250/CRF250/450/CRX250/450 ’06-’12 KX250F/450F & KXL450R ’06-’12 RMZ450; ’07-‘12RMZ250 ’04-’12 WR250F/450F MX-BC000-CA (silver) $374.95 MX-BC000-BA (black) $374.95

Stock Billet Hanger Bracket Required to install the billet caliper on a standard size rotor. Appl.: 240mm, CR125/250/250F/450F/250X/450X 04-12; 250mm WR250F/450F 04-12 MX-HB245-BA (black) $49.95 Appl.: 250mm, KX250F/450F 06-12; RM250Z 07-12 & RM450Z 06-12 RX-HB250-BA (black) $49.95

Honda Braided Steel Brake Line Improves stopping power and reduces fade over the stock plastic line. Why? Because expansion is close to zero under all riding conditions. Our lines are made from extremely flexible Dupont Teflon steel. They will never crack or leak for the lifetime of your motorcycle. ’04-‘08 CRs & CRFs require Brake-line Clamp (page 3) for installation. Appl: ’90-’08 CR125/250 ’02-’12 CRF250/450 BL-01212-CL (clear) $69.95 BL-01212-BK (black) $69.95 Phone 800 805 1516

Rideng.

Ride Engineering LLC

www.ride-engineering.com


Page 3

BRAKE ACCESSORIES Suzuki Braided Steel Brake Line

Kawasaki & KTM Braided Steel Brake Line

Made from extremely flexible Dupont Teflon steel, our line maximizes braking power without fade. Expansion remains close to zero under all riding conditions. Requires Brake-line Clamp (page 3) for installation.

Made from extremely flexible Dupont Teflon steel, our line maximizes braking power without fade. Expansion remains close to zero under all riding conditions. Requires Brakeline Clamp (page 3) for installation.

Appl: ’99-’08 RM125/250 -- ’04-‘12 RM250Z/450Z

Appl: ’94-’12 KX125/250/250F/450F; KTM SX150/250/ 250F/350F/450F

BL-01212-CL (clear) BL-01212-BK (black)

$69.95

BL-00012-CL (clear) BL-00012-BK (black)

Yamaha Direct Route Stainless Steel Brake Line

Yamaha Braided Steel Brake Line

The length and routing of our YZ line has been optimized for maximum braking power. Made from extremely flexible Dupont Teflon steel, it will never crack or leak for the lifetime of your motorcycle. Expansion is close to zero under all riding conditions to reduce fade. (Requires Brake-line Clamp (page 3) for installation)

Improves stopping power and reduces fade over the stock plastic line. Why? Because expansion is close to zero under all riding conditions. Require Brake-line Clamp (page 3) for installation.

Appl: ‘96-’04 YZ125/250/250f /426f 450f BL-00012-CL (clear) $69.95 BL-00012-BK (black) $69.95

Phone 800 805 1516

$69.95

Rideng. Ride Engineering LLC

Appl: ’05-’12 YZ125/250 & 250F/450F BL-01212-CL (clear) $69.95 BL-01212-BK (black) $69.95 www.ride-engineering.com


Page 4

BRAKE ACCESSORIES CRX/WRF/KLX Braided Steel Brake Line Made from extremely flexible Dupont Teflon steel, our line maximizes braking power without fade. Expansion remains close to zero under all riding conditions. (Requires Brake-line Clamp (page 3) for installation) Appl: ‘04-‘12 CRF250X/450X / ’05-’12 WR250F/450F / ’07-‘12 KXL450F

BL-30312-CL (clear only)

$69.95

Direct Route Stainless Steel Brake Line Our WR line routes as good as stock around the headlight, but then it routes directly to the caliper, like the Honda, making it shorter than the stock YZ line! Also made from extremely flexible Dupont Teflon steel, it improves stopping power and reduces fade. Expansion is close to zero under all riding conditions. (Requires Brakeline Clamp (page 3) for installation) Appl: WR250f/400f/426f/450f ’99-04 & ’08-‘12 WR250X/R - RMX450Z 2010-11 BL-02012-CL

$69.95

Brake Line Clamp

Brake Line Clamp (direct-route conversion)

This billet brake line mount is designed to hold braided steel brake lines, which are much narrower than stock lines.

Machined from billet aluminum with Delrin plastic base.

Appl.: ’04-‘08 RM125/250 ’04-’12 RM250Z/450Z ’05-’11 RM85 ’04-‘07 KX125/250 ’04-’12 KX250F/450F ’08 -’12 KLX450F ’10-‘12 RMX450Z

Provides a flat base for installation on all fork guards (Suzuki – Yamaha – Kawasaki including minis). Comes with stainless steel mounting hardware. Appl: ’99-‘03 RM125/250 ’00-’04 RM85 ’96-’04 YZ125/250/YZ250f ’98-’04 YZ400f/426f/450f ’99‘04WR250f/400f/426f/450f ’94-’03 KX125/250/500 ’93-’12 YZ85/KX85/100

RX-BLC00-BA (black) $34.95 Appl.: ’04 -’12 CR125/250 ’04 -’12 CRF250/450 ’06-’12 CRF250X/450X ’05 -’12 YZ125/250/250F/450F ’05 -’12 WR250F/450F/250X/250R

MX-BLC00-BA (black) MX-BLC00-RA (red)

CR-BLC00-RA (red) $34.95 CR-BLC00-MB (blue) $34.95 CR-BLC00-BA (black) $34.95 Phone 800 805 1516

Rideng. Ride Engineering LLC

$31.95 $31.95

www.ride-engineering.com


Page 5

BRAKE ACCESSORIES

Plastic Brake Line Guide Complete the race set up with this new plastic cable guide. All mounting hardware included. Appl:

CR80/125/250/250f/450/f500 RM80/85/125/250/250z/450z YZ80/85/125/250/250f/426f/450f KX85/100/125/250/250f/500

MX-BLG00-RD (red) MX-BLG00-BK (black)

$9.95 $9.95

Rear Master Cylinder Extensions Master-cylinder extensions increase fluid capacity to help dissipate heat. They are designed to help cool and keep the rear brake fade free! (gasket & hardware incl.) Appl: ‘02-’12 CR125/250/150f/250f/450f & CR250X/450X CR-MCE00-RA (red)

$31.95

Appl: ‘06 –‘12 YZ/250f/450f & ’07-‘11 WR250f/450f YZ-MCE00-RA (red) YZ-MCE00-MB (blue)

$31.95 $31.95

Appl: ‘’04-’12 Suzuki 250z/450z & ‘’05-’08 RM125/250 ’03-’12 KX125/250/250F/450F RX-MCE00-RA (red) RX-MCE00-GN (green)

Phone 800 805 1516

Rideng. Ride Engineering LLC

$31.95 $31.95

www.ride-engineering.com


Page 6

BRAKE ACCESSORIES

Master Cylinder Covers (NEW DESIGN!) (All front master cylinder covers come with matching hex screws) Appl: Yamaha/Kawasaki/Suzuki FRONT MX-MCC0F-RA (red) $26.95 MX-MCC0F-MB (blue) $26.95 YZ-MCC0F-MB (blue) $26.95 ’07-‘12 YZ250F & ’08-‘12 YZ450F YZ-MCC0F-RA (red) $26.95 ’07-‘12 YZ250F & ’08-‘12 YZ450F MX-MCC0F-GN (green) $26.95

Appl: Honda FRONT CR-MCC0F-RA (red) $26.95 Appl: KTM FRONT ’00-’12 KT-MCC0F-GE (orange) $26.95

Appl: ’03-’12 Yamaha REAR Appl: ’03-’12 Kaw KX125/250/250F/450F REAR Appl: ‘02-’12 CR125/250/150f/250f/450f YZ/WR125/250/250F/450F/250X ’04-’10 Suzuki RMZ250/450 ’05-’08 RM125/250 REAR CR250X/450X YZ-MCC0R-RA (red) $23.95 YZ-MCC0R-MB (blue) $23.95

RX-MCC0R-RA (red) $23.95 RX-MCC0R-GN(green) $23.95

CR-MCC0R-RA (red)

$23.95

Appl: ’04-’12 KTM REAR KT-MCC0R-GE (orange) $24.95

Anodized Alum. Banjo Bolt Kit (2/ banjos, 4/washers incl.) Appl: most bikes 60% lighter than stock steel banjos. 14mm heads for easy installation. MX-BBB00-RA (red) $14.95 MX-BBB00-MB (blue) $14.95 HON/KAW/SUZ/YAM

BILLET REAR BRAKE CLEVIS Appl: ’03-’12 Yamaha YZ125/250/ YZ250F/450F/WR250F/450F /250X Suzuki RM450Z ’05-’12/RMX450Z & RM250Z ’07-‘12 MX-BC006-MB (blue) $44.95 MX-BC006-RA (red) $44.95 Phone 800 805 1516

Appl: ’04-’12 Kawasaki KX250F/450F KX250 ’05-’07, KXL450F & Suzuki RM250Z ’04-‘06

MX-BC008-GN (green) $44.95 MX-BC008-RA (red) $44.95

Rideng. Ride Engineering LLC

Appl: ‘02-’12 Honda CR125/250/150F/250F/450F/CR250X/450X

CR-BC006-RA (red)

$44.95

www.ride-engineering.com


BRAKE LINES FOR MINIS

Page 7

Braided Steel Brake Line: CR80/85

Braided Steel Brake Line: RM85 ’05-‘12

Our brake lines will improve stopping power, eliminate fade and lower your lap times. Feel the difference a braided steel line can make!

(Uses same line as CR85.) BL-M1212-CL

$64.95

(Requires Brake line Clamp, rx-blc00-ba)

BL-M1212-CL CR85 reg. bars BL-3M312-CL CR85 tall bars, CR85 Expert & CRF150

Direct Route Line: YZ/KX80/85/100 ‘93-‘12 The length and routing has been optimized for maximum performance. Now 2" longer to accommodate wider/taller handlebars. Requires Brake-line Clamp, mx-blc00-ba or ra

$64.95

BL-M0012-CL

$64.95

Braided Steel Brake Line: TTR125L Ride now offers a front brake line that works with the TTR125L master-cylinder and the TTR or YZ80/85 caliper for those using YZ80 forks! (Brake line mount required when using YZ80 forks). BL-M1P00-CL $64.95

BRAIDED STEEL REAR BRAKE LINES Appl: ‘03-‘12 Yamaha YZ125/250 ‘04-’12 Kawasaki KX250F/450F ‘02-’12 CR125/250/250f/450f KTM 150/250/ YZ250F/450F/WR250F/450F ’04-’12 RMZ250/450 ’05-’08 RM125/250 CR250X/450X & WR250X/R 250F/350F/450F BL-Y4020-CL (clear) BL-Y4020-BK (black)

YZ/YZF/WR/WRF Phone 800 805 1516

BL-04040-CL (clear) BL-04040-BK (black)

BL-03020-CL (clear) BL-03020-BK (black)

RM/RMZ/KXF

CR/CRF/CRX/WRX

Rideng. Ride Engineering LLC

BL-K9020-CL (clear) BL-K9020-BK (black)

$57.95 $57.95

KTM www.ride-engineering.com


Page 8

PRO BAR MOUNTS & TRIPLE CLAMPS Ride Eng.’s Fourth Generation Over-sized Bar Mount for Honda/Suzuki & Kawasaki Application This one-piece 1 1/8” design removed 1 oz over the previous (GEN III) version while further increasing its strength and torsional resistance in the event of a crash. Precision machined from aircraft quality aluminum, with 3mm of adjustability forward or back. We also machine our own stainless steel posts that resist bending much better than the cheap bolts used by other competing brands. Appl: CR/CRF125/250/450/500 ’99-’12 & CRX250/450 MX-BBM00-CA $99.95

Replacement posts Appl: CR/CRF/CRX (stock length) CR-BMS00-SS $14.95/pr KX & RM (stock length) KX-BMS00-SS $14.95/pr

With 10mm Taller Bar Mount Spacers CR/CRF/CRX (plus 10mm) KX/KXF/KLX (plus 10mm) YZ/YZF longer bolt kit

CR-BMS10-SS CR-BMS00-SS YZ-76150-KT

$14.95/pr $14.95/pr $04.95/pr

For Use With Stock YZ/YZF Triple Clamps YZ/YZF longer bolt kit

YZ-76175-KT

$04.95/pr

NEW! One Piece Bar Mount for 7/8” stock Honda & Kawasaki Handlebars

Appl: KX125/250/250F/450F ’05-’12 & KLX450R RM250Z ’04-‘06 & RMZ250/450 ’08-’12 (Rideng Triple clamps only) KX-BBM00-CA $99.95 Appl: RM250 ‘03-’08 / RMZ450 ’05-’07 & RMZ250 ‘07 RM-BBM07-CA (stock Suzuki Triple Clamps only) $99.95 Appl:RMZ250/450 ’08-’12 RM-BBM08-CA (stock Suzuki Triple Clamps only) $99.95

10mm Taller Bar Mount Spacers Appl: All Rideng Bar Mounts AF-BMS10-00 $14.95/pr

At Ride Eng. we love our stock Honda Renthals so much we decided to offer a bar mount specifically for 7/8” handlebars. Key Features: 3mm of adjustability front and back; stainless steel posts that resist bending much better than the cheap bolts used by competitor’s brands; and a one-piece upper with 8pinch bolts to greatly resist twisting in a crash. They fit stock or after market rubber-mounted triple clamps. Appl: CR125/250/250F/450F/500 ’00-’12 P.N.: CR-BBM78-00

$89.95

Appl: KX250/250F/450F ‘06-’12 P.N.: KX-BBM78-00

$89.95

GEN IV One-Piece Rubber Mounted Bar Mounts for Solid Mounted Triple Clamps Re-designed one final time to produce the lightest most resistive to twisting bar mount in our 7 year history. 3mm of adjustment front or back. Rubber cushion insolates the handlebars from vibration and reduces hand fatigue. New YZ height is same as stock ’10 YZ450F. Add 10mm spacer (AF-BMS00-00) to be equivalent to stock ’10 YZ250F. Also fits stock YZ/YZF/WRF upper triple clamps. KTM bar mount same height as stock, fits stock & Ride Eng. Clamps. Appl: Ride Eng. YZ/YZF triple clamps & stock YZ triple clamps (‘06-‘12) P.N.: AF-BBM00-CA $89.95 Appl: Ride Eng. KTM triple clamps & stock KTM triple clamps P.N.: KT-BBM00-CA $99.95 Phone 800 805 1516 www.ride-engineering.com

Fax: 949 722 8370


Page 9

Ride Eng. YZ450F Triple Clamp Set Our new precision machined billet Triple Clamps are re-designed with more flex to work better with the new YZF frame. In addition a steering stabilizer mount has been added as a request from our Factory supported race team. A frame mounted bracket will be available soon so customers can install the Showa steering dampener on the Yamaha head tube behind the no. plate. Appl: YZ450F (2010-12) & 2012 YZ250F YZ-TB04T-00 (silver) 20mm $449.95 YZ-TB04T-BA (black) 20mm $449.95 YZ-TB02T-MB (YZ blue) 22mm $449.95 YZ-TB02T-BA (black) 22mm $449.95 Incl. in kit: Top clamp, Bottom clamp, pressed in stem & lower bearing.

Newly Re-designed YZ/YZF Offset Triple Clamp Set

Newly Re-designed Ride Eng. YZ/YZF Triple Clamp Set Our offset clamps are designed for better handling and more weight placement on the front wheel. They do NOT increase head-shake. Use our over-sized rubber-mounted bar mounts shown (Bar Mounts sold separately and required - '05 YZs must use '06-'12 front no. plate). YZ-TB624-00 (YZ250 ‘05-’12; ’07-’12 WR250/450F/ & ’04-‘07 YZ450F) 22mm offset (Silver) YZ-TB025-00 (’10-’11 YZ250f; YZ125 ‘06-’12) 25mm offset (Silver) (Star Race Team replica clamps)

$449.95

Designed for better handling and more weight placement on the front wheel. They do NOT increase head-shake. Use our over-sized rubber-mounted bar mounts shown (Bar Mounts sold separately and required ) Included in kit: Top clamp, Bottom clamp, Stem and Lower bearing. YZ-TB612-BA (‘08-‘09 YZ450f ; ’06’11 YZ250f; ’06-‘012 YZ125) 22mm offset (Black) $449.95

$449.95

Included in kit: Top clamp, Bottom clamp, Stem and Lower bearing.

Ride Eng. CR/CRF Triple Clamps Add a set of Ride Eng. triple clamps to improve handling, remove weight, increase strength and reduce fork stiction while improving the appearance of your ride. Our offset triple clamps place more weight on the front wheel and quicken steering to improve handling. They retain the factory rubber-mount system for less hand fatigue and accept the factory Honda steering stabilizer. The rider can choose between our new one piece 7/8” bar mount or 1 1/8” shown. These are also offset for handlebar adjustability - 3mm forward or 3mm back. Riders on a budget can simply re-use stock. Fit ’04 and up front no. plates. All Ride clamp sets come complete with pressed in stem and lower bearing. Appl: CR125/250 &CRF250/450 ‘02-‘08 & ’09 CRF250 CR-BTB40-RA red 20mm Offset CR-BTB40-BA black 20mm Offset CR-BTB20-RA red 22mm Offset CR-BTB20-BA black 22mm Offset Appl: ’09-‘12 CRF450R & ’10-‘12 CRF250R CR-BTB09-RA red 21mm Offset CR-BTB09-BA black 21mm Offset CR-BTB29-RA red 22mm Offset CR-BTB29-BA black 22mm Offset (Bar Mounts sold Separately) Phone 800 805 1516

www.ride-engineering.com

$429.90 $429.90 $429.90 $429.90

$449.90 $449.90 $449.90 $449.90 Fax: 949 722 8370


Page 10

PRO BAR MOUNTS & TRIPLE CLAMPS KXF250/450 Triple Clamp Sets, 20 & 22mm Offset Designed for minimum weight, maximum strength and torsional rigidity. Use with Ride Eng. One-Piece Bar Mounts to prevent handlebar twist while retaining the rubber-mounted system that lessens hand fatigue. (saves 5oz) Now all Rideng KXF triple clamps are stabilizer ready (use bracket: KXSHSB0-00 & dampener: MX-HPSD9-00) Appl: KX250F ’06-‘12

$449.90

Appl: KX450F ’06-‘12

$449.90

KX-TBS20-GN (green) 22mm offset KX-TBS20-BA (black) 22mm offset

KX-TBK20-GN (green) 22mm offset KX-TBK20-BA (black) 22mm offset KX-TBK20-00 (silver) 21.5mm offset KX-TBS40-GN (green) 20mm offset KX-TBK40-GN (green) 20mm offset KX-TBS40-BA (black) 20mm offset KX-TBK40-BA (black) 20mm offset KX-TBS40-00 (silver ) 20mm offset KX-TBK40-00 (silver) 20mm offset Included in kit: Top clamp, Bottom clamp, pressed in stem and lower bearing.

NEW! Steering Head Stab. Brackets Now you can install a Showa dampener behind the number plate of your KTM; YZF or KXF! Appl: KX250F/450F (2008-12) KX-SHSB0-00 silver $49.95 Appl: YZ450F (2010-12) YZ-SHSB4-00 silver Appl: KTM ALL KT-SHSB0-KT silver

$49.95

$149.95

NEW! Ride Eng. KTM Triple Clamp Sets Designed for light weight and flex. NEW! Appl: KTM 150/250/300/250F/350F/450F/525 KT-BTB22-GE (orange) 22mm offset $479.90 KT-BTB22-BA (black) 22mm offset $479.90 KT-BTB40-GE (orange) 20.5mm offset $479.90 KT-BTB40-BA (black) 20.5mm offset $479.90 KT-BTB19-GE (orange) 19mm offset $479.90 KT-BTB19-BA (black) 19mm offset $479.90 (Included in kit: Top clamp, Bottom clamp, pressed in stem and lower bearing.)

Ride Eng. RM/RMZ Top & Bottom Clamp Sets We’ve re-designed our RM/RMZ triple clamp set to fit the old and the new front fender so that one part number covers 7 years of applications! Weight loss was also achieved as this set saves 7.5 oz over stock! Now available in two offsets to custom tune the handling of your motorcycle. The 20s work well on the 450z while the 22s make its little brother handle like a dream. (Bar Mounts sold separately and required. use KX-BBM00-CA for oversized bars or KX-BBM78-00 for 7/8” bars. Also required: stock ’08-’11 Suzuki RMZ or Honda CRF rubber cones). Appl: RM125/250/450z ‘03-’09 & RM250z ’07-‘12 RM-BTB20-RA (red) 22mm offset $449.90 RM-BTB20-BA (black) 22mm offset $449.90 RM-BTB40-RA (red) 20mm offset $449.90 RM-BTB40-BA (black) 20mm offset $449.90 NEW! Appl: RM450z ’10-‘12 RM-BTB41-RA (red) 20mm offset $449.90 RM-BTB41-BA (black) 20mm offset $449.90 (Included in kit: Top clamp, Bottom clamp, pressed in stem and lower bearing.) Phone 800 805 1516

www.ride-engineering.com

Fax: 949 722 8370


Page 11

SUSPENSION LINKS SHOWA STEERING DAMPENER Now the Honda HPSD is available from Ride Engineering. MX-HPSD9-00

$225.00

NEW! KTM LOWERING LINK

$219.95

Ride's newest product is a suspension link to lower the back of the new 'linkaged' chassis 6mm to improve the handling of these bikes. You will notice better tracking in off-camber or bermless turns, it will help the bike go straight in whoops and it also keeps the back end more planted in breaking bumps. It comes complete with bearings and seals. Recommended sag with the our Link is 100-102mm. Appl: ’11 XC-W/250F/350F/450F & ’11-’12 SXF250/350/450 SX125/150/250 KT-LKA44-GE (ORANGE)

CRF LOWERING LINK

$199.95 Ride’s newest product is a suspension link to lower the back of the motorcycle 7-10mm. It comes complete with bearings and seals. The link improves handling and keeps the bike going straight in whoops allowing the rider to be much more aggressive. It also keeps the back planted in breaking bumps. Lowering links tend to firm up (slow down) rear suspension action. To compensate if too firm, open the high speed compression in quarter turn increments and speed up the rebound in 2 turn increments. Recommended sag with the Rideng Link is 102-106mm. Appl: ‘09-‘10 CR450F &’10-‘12 CR250F CR-LKA47-RA (RED) ’11- ‘12 CR450F CR-LKA45-RA (RED)

YZF LOWERING LINK

$224.95

Ride’s newest product is a suspension link to lower the back of the motorcycle 10mm. It comes complete with bearings, seals and steel roller. The link improves handling and keeps the bike going straight in whoops allowing the rider to be much more aggressive. It also keeps the back planted in breaking bumps. Lowering links tend to firm up (slow down) rear suspension action. Recommended sag with the Rideng Link is 100-105mm. Appl: ‘09-‘12 YZ250F/450F

KXF LOWERING LINK

YZ-LKA44-BA (BLACK)

$209.95

Ride’s newest product is a suspension link to lower the back of the motorcycle. It lowers the 2009 bikes 10mm and the 2010-11 bikes, 5mm. It comes complete with bearings and seals. The link improves handling and keeps the bike going straight in whoops allowing the rider to be much more aggressive. It also keeps the back planted in breaking bumps. The recommended sag with the Rideng Link is 100-105mm. Appl:

‘09-‘12 KX450F

‘09-‘12 KX250F

Phone 800 805 1516

KX-LKA35-GN (GREEN) KX-LKA31-GN (GREEN) www.ride-engineering.com

Fax: 949 722 8370


ENGINE

Page 12

Hot Start-left or right side mount Mounts on the left or right side of the handlebar for easy thumb access (not required with EFI). Appl: CRF 150R/250R/450R 2002-2009 YZ 250F/450F 2003-2010 KXF 250/450 2004-2010 RM 250Z/450Z 2004-2011 RX-HS000-AS $59.95

Billet Oil Fill Plugs Flush mount design eliminates the risk of oil loss from a punctured or cracked plastic plug. Precision machined for better thread engagement. Easily removed with a Quarter. Appl: YZ/WR/YZF/WRX all & CR/CRF all –TRX/YFZ Quad $21.95 MX-BFP00-RA (RED) MX-BFP00-MB (YZ BLUE) MX-BFP00-BA (BLACK) Appl: RM 125/250/450Z ‘03-’12 RM-BFP00-RA (RED) RM-BFP00-MB (BLUE) $21.95 RM250Z ’07-‘12 Appl: KX 250/450F ’05-’12 RMZ250 ‘04-‘06 RX-BFP00-RA (RED) $21.95 KX250F ’04-‘12 RX-BFP00-GN (GREEN) $21.95 Appl: KTM 125/250/250F/300/450F/525F ’04-’12 KT-BFP00-GE (ORANGE) $21.95

Billet Engine Oil Dip Stick Extremely light weight design is a great replacement for the stock plastic/steel one. Appl: CRF450R ’09-‘12 & CRF150 ALL CRF450X ’05-‘11 CRF250R/X ’04-‘09

CR-DS45R-RA (RED) CR-DS45X-RA (RED) CR-DS250-RA (RED)

$34.95 $24.95 $24.95

Fuel Mixture Screw Provides a means to adjust your carburetor with your finger tips for clean, crisp throttle response, right off idle. Unique shape can also be turned with the push of a screwdriver. Appl: CRF/CRX 150/250/450 – YZF/WRF 250/426/450 & YFZ Quad -- KXF250/450 – RM250Z/450Z – KTM 250/450/525 03-10 MX-FS000-BA (black-not shown) MX-FS000-RA (red) MX-FS000-MB (blue) MX-FS000-GN (green) $21.95

Billet Ignition & Timing Plug Kits - Made from aerospace quality aluminum. Precision machined for better thread engagement. Easily removed with a Quarter or Motion Pro ignition plug tool. Appl: 1998-2005 YZF all; 2006-2011 YZ250F/WR250X/R & 1999-2002 WR all YZ-BIT00-RA (red) YZ-BIT00-MB (yz blue) YZ-BIT00-BA (black) Appl: 2006-2009 YZ450F; 2003-2011 WR all & YFZ450 QUAD 2004-2008 YZ-BIT06-RA (red) YZ-BIT06-MB (yz blue) YZ-BIT06-BA (black) Appl: 2010-12 YZ450F; 2009-2012 YFZ450 QUAD & RAPTOR QUAD 2004-2012 NEW! YZ-BIT10-RA (red) YZ-BIT10-MB (yz blue) Appl: 2004-2010 KX250F & 2004-2006 RM250Z RX-BIT00-RA (red) RX-BIT00-GN (green)

$41.95

Appl: 2002-2012 CRF150/250/450 & CRF250/450X $41.95 CR-BIT00-RA (red) CR-BIT00-BA (black) Appl: 2007-2012 KTM450F & 2011 KTM350F KT-BIP00-GE (orange)

Phone: 800 805 1516

Appl: 2006-2012 KX450F & 2011 KX250F KX-BIT00-GN (green) KX-BIT00-RA (red)

$44.95 $44.95

$47.95 $41.95

Appl: 2005-2012 RMZ450 & 2007-2012 RMZ250 $41.95 RZ-BIT00-RA (red) RZ-BIT00-MB (blue)

$29.95 NEW!

www.ride-engineering.com

Fax: 949 722 8370


CONTROLS

Page 13

Billet Engine Kill/Starter Switch Replaces the stock engine kill switch on all off-road motorcycles except the 2009 CR450f. Integrated into the clamp that holds the clutch lever or front brake master-cylinder; this item eliminates one component completely off the motorcycle to make handlebar changes faster and easier than ever before. For those that ride electric start motorcycles, a second switch can be added to eliminate the stock start button! We recommend this application for the CRX-WRF-KLX-XR & all electric start KTMs. Appl: YZ/YZF/WRF all - CR/CRF/CRX all KX/KXF/KLX all – RM/RMZ all – KTM all (Brembo only) MX-KS00C-AS (silver) MX-KS00B-AS (black)

$49.95 $49.95

CRF450r ’09-’10 & CRF250r ’10-‘12 require LED light MX-LED00-AS (red) $29.95

Remote Compression Adjusters (patent no. D0515984) Ride Eng. has created a product to make adjusting your fork compression simple with no external tools required. Imagine being able to pull over, turn your compression in or out for the track conditions, then continue on with your moto! Our comp. adjusters are extremely low profile and remain on your forks until fork disassembly is required. Allen wrench & mounting hardware included. Appl: CR250/CRF250/450 ‘02-’08 & ’09 CR250F; RM250/RMZ450 ‘03-’12 & ’07-‘12 RM250Z; ’06-‘10 KX250F; DRZ400SM; ’10-‘12 RMZ450X MX-CAS00-RA (Showa forks-47mm) RED $84.95 MX-CAS01-RA (Showa forks-’11-‘12 KX250F) RED $41.50 Appl: YZ/YZF ’05-’12; KX450F ’08-’12; CR450F ’09-‘12 MX-CAK00-RA (kyb forks-48mm) RED $84.95 MX-CAS48-RA (showa forks-48mm) RED $84.95 Appl: KTM ’07-’12 (adjustment wheels only-no housing required) MX-FAW00-GE (wp forks) ORANGE

Holeshot Device

Holeshot Fork Support Kit

Light weight, simple design with no moving parts to jam. $69.95 Appl: YZ/YZF ’08-’12/CRF450 ’09-‘12/KX450F ’09-‘12/ CRF250 ’10-‘12 MX-HD488-CA Appl: CRF250/450 ’05-’08 – CRF250 ‘09/KX250F ’09-‘12 & RMZ250/450 ’07-’12 MX-HD478-CA

Phone: 800 805 1516

$44.95

Prevents slot in plastic from tearing. Appl: YZ/YZF ’08-’12 – CRF250/450 ’05-’12 KX250F/KX450F ’09-’12 MX-HDSP0-AS

www.ride-engineering.com

$29.95

Fax: 949 722 8370


WHEELS

Page 14

Billet Axle Blocks Precision machined for a better swing arm fit and more accurate chain alignment. 6mm longer than stock keeps chain adjustment bolts less extended. Provides two M8 hex nuts to “double lock” adjustment bolts and keep them from loosening. Appl: all 2002-2008 YZFs; 2002-2012 YZs/ WRs (incl.WRX) (ex YZ85) YZ-BAB00-MB (blue) YZ-BAB00-RA (red) all 2009-11 YZ250F & 2009 YZ450F (except YZ85) YZ-BAB09-MB (blue) YZ-BAB09-RA (red) 2010-12 YZ450F & 2012 YZ250F YZ-BAB10-MB (blue) YZ-BAB10-RA (red) Appl: all 2000-2008 CRs/CRFs/CRXs (except CR85) CR-BAB00-RA (red) CR-BAB00-BA (black) 2009-12 CRF250/450 CR-BAB09-RA (red) CR-BAB09-BA (black) Appl: 2007-2012 CRF150r CR-MBAB0-RA (red) Appl: all 2003-2012 KXs/KXFs (except KX85) & 2004-2012 RMZ250/450 RX-BAB00-RA (red) RX-BAB00-BA (black) RX-BAB00-GN (green) Appl: all 2002-2008 RM125/250 (except RM85) RM-BAB00-RA (red)

$47.95 $47.95 $47.95 $47.95 $47.95 $39.95 $47.95 $47.95 $47.95

Ride Eng. Wheel Spacers Ride Engineering wheel spacers are designed to stay put when re-installing your wheels after those dreaded tire changes. They eliminate that "third hand" often required to catch the spacer from falling out of the seal when placing your wheel between the swing-arm or forks. $31.95/ PAIR Front or Rear. CR-WS00F-RA (RED), front CR-WS00R-RA (RED), rear

Appl: CR125, CR250, CRF250, CRF450 02-12 Appl: CR125, CR250, CRF250, CRF450 02-12

YZ-WS00F-MB (BLUE), front Appl: YZ/YZF All (except 85 & ’07 250F) 02-07 YZ-WS07F-MB (BLUE), front Appl: YZ250F 07-12& 08-12 YZ450F YZ-WS07F-RA (RED), front Appl: YZ250F 07-12 & 08-12 YZ450F YZ-WS00F-RA (RED), front Appl: YZ/YZF All (except 85 & ’07 250F) 02-07 YZ-WS00R-MB (BLUE), rear Appl: YZ/WRF 03-11 (ex. 85) / YZF All 03-08 YZ-WS09R-MB (BLUE), rear Appl: YZF250/450 2009-12 YZ-WS00R-RA (RED), rear Appl: YZ/WRF 03-11 (ex. 85) / YZF All 03-08 YZ-WS09R-RA (RED), rear Appl: YZF250/450 2009-12 KX-WS00F-GN (GREEN), front Appl: KX250, KX250F, KX450F 06-11 KX-WS00R-GN (GREEN), rear Appl: KX125, KX250, KX250F, KX450F 03-12 RZ-WS00F-RA (RED), front Appl: RMZ450 05-11 & RM250Z 07-12 RZ-WS00R-RA (RED), rear Appl: RMZ450 05-11 & RM250Z 07-12 RX-WS00F-RA (RED), front Appl: KX250, KX250F, KX450F 06-12 RX-WS00R-RA (RED), rear Appl: RM250Z 04-06 & KX all (except 85) 03-12

Ride Eng. Valve Cap & Rim-lock Spacer Kit Kit includes: 2 billet valve caps, 2 rim-lock spacers (each sized for the front and rear rim diameter), 2 hex flange nuts to keep the rim-lock spacers secure and 2 small o-rings to help seat the valve caps. (BLACK NOT SHOWN) MX-VCS00-GN (GREEN) MX-VCS00-MB (BLUE) MX-VCS00-RA (RED) MX-VCS00-BA (BLACK) Rideng. Ride Engineering Inc. www.ride-engineering.com

Appl: universal Appl: universal Appl: universal Appl: universal

$24.95 SET $24.95 SET $24.95 SET $24.95 SET

Phone 800 805 1516 - Fax: 949 722 8370


PROMOTIONAL ITEMS Page 15

Ride Eng. Tees

Ride Eng. Tees

Ride Eng. blue logos on black.

Ride Eng green logos on black.

MX-T00MD-BL Medium

MX-T00MD-GN Medium

MX-T00LG-BL Large

MX-T00XL-BL Extra-Large

Each $19.95

MX-T00LG-GN Large

MX-T00XL-GN Extra-Large

Each $19.95

Ride Eng. Tees

Ride Eng. Tees

Ride Eng. red logos on black.

Ride Eng. orange logos on black.

MX-T00MD-RD Medium MX-T00XL-RD

MX-T00LG-RD Large

Extra-Large

Each $19.95

MX-T00MD-GE Medium MX-T00XL-GE

MX-T00LG-GE Large

Extra-Large

Each $19.95

Ride Eng. Hats Yupong flex fit brand. MX-HATMD-BK Small/Medium MX-HATLG-BK Large/X-Large

BLACK BLACK

MX-HATMD-MB Small/Medium MX-HATLG-MB Large/X-Large

NAVY NAVY

Each

Rideng. Ride Engineering Inc. www.ride-engineering.com

$24.95

Phone 800 805 1516 - Fax: 949 722 8370


SPORTBIKE - YAMAHA Page 1sb

R1/R6 Fender Eliminator Kit Includes: Aluminum black anodized bracket/s, & all mounting hardware. Appl: ’09-12 R1 RR-LPH09-BA $84.95 (unique two-piece Design can be used with or without turn signals) Appl: ’09-12 R1 RR-LPHEX-BA $19.95 (Required when installing after – market exhaust) Extends kit out approx. 2” Appl: ‘07-‘08 R1 (comes complete with exh. spacer) RR-LPH07-BA $84.95

FZ1 Fender Eliminator Kit Unique two piece design can be used with or without stock or after-market turn signals. Complete kit includes: Aluminum black anodized brackets, and all necessary mounting hardware. Appl:

2006-12 FZ1 RZ-LPH00-BA $69.95 2011-12 FZ8 RZ-LPH00-BA $69.95

NOTE: ‘04-‘06 R1 requires Exhaust Spacer Kit: RR-LPH04-SP $29.95 Appl: ‘02-’06 R1 ‘01’05 R6 & ’06-’09 R6s RR-LPH04-BA $54.95

2006-12 R6 Fender Eliminator Kit Unique two piece design can be used with or without stock or after-market turn signals. Complete kit includes: Aluminum black anodized brackets, and all necessary mounting hardware. Appl: 2006-12 R6

RR-LPH06-BA

$64.95

Rideng. Ride Engineering Inc. - Phone 800 805 1516 - Fax: 949 722 8370 – www.rideengineering.com


SPORTBIKE - HONDA Page 2sb

CBR600rr ’07-‘11 Fender Eliminator Kit Ride's first kit that comes with a 6 inch long LED to replace the tail light for a distinctive look! Complete kit includes: Aluminum black anodized license plate bracket, two tear drop shaped block off plates for those that wish to replace the stock turn signals (photo on left) and all necessary mounting hardware. Appl: ’07-‘12 CBR600RR CB-LPH07-BA

$99.95

SU-LPH66-BA Honda CBR600RR$54.95 & 1000RR Fender Eliminator Kit

Complete kit includes: Aluminum black anodized license plate bracket, two tear drop shaped block off plates for those that wish to replace the stock turn signals and all necessary mounting hardware. Appl: 2003-’06 CBR600RR 2004-’07 CBR1000RR CB-LPH00-BA

$44.95

SPORTBIKE – SUZUKI GSX-R600 & 750 Fender Eliminator Kit Complete kit includes: Aluminum black anodized brackets, and all necessary mounting hardware. Appl: 2011-12 GSX-R600 & GSX-R750 SU-LPH61-BA $59.95 Appl: ’08-‘10 GSX-R600 & GSX-R750 SU-LPH68-BA $54.95

Rideng. Ride Engineering Inc. - Phone 800 805 1516 - Fax: 949 722 8370 – www.ride-engineering.com


Page 3sb

GSX-R 1000 Fender Eliminator Kit Complete kit includes: Aluminum black anodized bracket, and all necessary mounting hardware. Appl: ’09-‘12 GSX-R1000 SU-LPH09-BA $54.95 Appl: ’05-‘08 GSX-R1000 SU-LPH05-BA $54.95 Appl: ’03-’04 GSX-R1000 SU-LPH00-BA $39.95

SV650 & 1000 Fender Eliminator Kit Complete kit includes: Aluminum black anodized bracket, and all necessary mounting hardware. Appl: ’03-’12 SV-650 & 1000 SV-LPH00-BA

$54.95

SPORTBIKE – KAWASAKI

ZX6 & 250 Ninja Fender Eliminator Kit Complete kit includes: Aluminum black anodized bracket, and all necessary mounting hardware. Appl: ’07-‘08 ZX6 KA-LPH07-BA $39.95 (left) Appl: ’08-‘12 250 Ninja KA-LPH28-BA $79.95 (right) Rideng. Ride Engineering Inc. - Phone 800 805 1516 - Fax: 949 722 8370 – www.ride-engineering.com


Page 4sb

ZX10 & ZX6 Fender Eliminator Kit Unique two piece design can be used with or without stock or after-market turn signals (except 2011 ZX10). Complete kit includes: Aluminum black anodized brackets, and all necessary mounting hardware. NEW! Appl: ’11-‘12 ZX10 KA-LPH11-BA $89.95 Appl: ’09-‘12 ZX6 KA-LPH18-BA $69.95

Appl: ’04-’07 ZX10 KA-LPH16-BA Appl: ’08-‘10 ZX10 KA-LPH18-BA

License Plate Light Bar with Built in LED Ride Eng.'s economical answer to putting the license plate light back on your plate. The complete kit includes: silver light bar, silver LED housing, LED wire assembly and all necessary mounting hardware. Appl: most motorcycles

SB-LB000-AS

$29.95

Rideng. Ride Engineering Inc. - Phone 800 805 1516 - Fax: 949 722 8370 – www.ride-engineering.com

$69.95 $69.95


SPORTBIKE Page 5sb

CARBON FIBER TANK PROTECTOR Made from real 2x2 carbon fiber weave. Fits most motorcycle gas tanks. Logo color now charcoal grey. Appl. Incl.: Yamaha R1, R6, FZ1 & FZ1300 Suzuki GSXR600 GSXR750, GSXR1000, GSXR1300, SV650 & SV1000 Honda CBR600, Interceptor, RC51 CBR1000rr & F4i Kawasaki ZX6, ZX636, ZX10, Z1000 & Z750s SB-TP000-CF

$31.95

Billet Oil Caps

(Easily installed with a Quarter.)

Appl : Suzuki GSXR 600/750 ‘04-‘12, GSXR 1000 GSXR 1300, ’03-‘12, SV650 & SV1000 ’03-‘12 RM-BFP00-RA (red) RM-BFP00-MB (blue) $21.95 Appl : Honda CBR600/1000rr, & F4i ’03-‘12 MX-BFP00-RA (red) MX-BFP00-MB (blue) MX-BFP00-BA (black)

$21.95 $21.95

Appl : Yamaha R1/R6/FZ1/YZF600 ’97-‘12 RR-BFP00-BA (black)

$24.95

Appl : Kawasaki KLX110, ZX6, ZX636, ZX7, ZX9, ZX10, ZX11, ZX12, ZX14, Z1000, Z750s, Ninja 500/600, ZZR600, ZR7s, GPZ, ZRX ’90-’12, Ninja 250 ’08-‘12 KA-BFP00-BA (black) KA-BFP00-GN (green) $24.95

Sport bike Axle Blocks Replace the stock chain adjustment blocks with this precision machined set. 5mm longer than stock to reduce the stresses on the adjustment bolts. Axle head and washer are recessed in for a cleaner look. Appl : Yam YZF-R1 ’04-‘12 & FZ1 ’06-‘12 RR-BAB10-BA (black) $49.95 RR-BAB10-MB (blue) $49.95 Appl : Suzuki GSXR-1000 ’03-’12; GSXR600/750 ’04-’12 & GSXR-1300 Hayabusa ’08-‘12 SU-BAB00-BA (black) $49.95 SU-BAB00-MB (blue) $49.95 Rideng. Ride Engineering Inc. - Phone 800 805 1516 - Fax: 949 722 8370 – www.ride-engineering.com


Ride Engineering Inc