Page 1

B.H. PAYNE & CO., INC. PO Box 90608 East Point, GA 30344

Saw Manufacturers and Mill Supplies 路 Same Day Shipping on Stock Items We accept Visa and Mastercard!

Tel: 404-761-8711 Fax: 404-761-5398 Toll Free: 800-752-0627 info@paynesaws.com www.paynesaws.com

Plant and Offices: 1657 Taylor Ave East Point, GA 30344

Mailing Address: PO Box 90608 East Point, GA 30364

2011 Catalog


Our Promise, Guarantees and Warranties SUPERFINE® Products Thank you for your information request. The B. H. Payne & Company, Inc., has been setting the standard of excellence since 1890 in the circular saw blades and related Forestry Products Industry in the USA. Our Company is a family owned manufacturer of large inserted tooth saws which amplifies our interest in you, the Customer. Payne Saws are made only of the highest quality nickel alloy saw plates & materials available. Our workmanship and quality control practices are unsurpassed in the circular saw blade industry. These factors, coupled with our service oriented production staff and shorter delivery periods, assure you that as our customer you will run the best products possible. We would appreciate the opportunity to quote you on your next requirement of inserted, solid tooth or carbide saws as well as on any mill supplies. This catalog represents only a small portion of the items that we manufacture and sell, but it should give you an idea of our product range. Please do not hesitate to contact us for any further information needed. We should have what you need in stock, and we ship the same day you place the order. We look forward to being of service to you.

First: Superfine® Saws and Saw Products are guaranteed to be free of defects in material and workmanship. After inspection at our factory, any product found to be defective will be replaced free of charge or repaired, at our option. Solid Tooth Saws are not guaranteed against rim or gullet cracks. Second: Superfine® Standard Size Shanks are guaranteed against breakage. Any new, well oiled, Superfine® Standard Size Shank which breaks while being inserted into a well oiled saw may be returned for a free replacement. Third: Hammering and Tensioning has a conditional guarantee of 30 days from the date of delivery and includes new, reconditioned, or used saws. If during this period the saw does not run satisfactorily and evidence supports that it has not been abused, the saw will be rehammered free of charge.

HOW TO ORDER When ordering, complete information should be given as follows: Quantity ________ Style __________________ Diameter ____________________ Number of Teeth ________ Hand (right or left) ____________________________ Thickness (gauge) at center ____________ at rim _________________________ Size of Mandrel Hole _________________________________________________ Number, Size and Bolt Circle of Pinholes _________________________________ RPM out of cut ______________________ in cut __________________________ Horsepower _______ Type of Power (Diesel, Electric, etc.) __________________ Kind of timber to be sawed ____________________________________________

Sincerely, Bobby Richardson Sales Manager

The hand of the saw is determined by the side on which the log passes. Standing in front of the saw (with the saw revolving toward you), if the log passes to the right of the saw, it is a RIGHT-HAND SAW; if to the left, a LEFT-HAND SAW. Distributed By:

© B.H. Payne & Co., Inc. 2011


Chipper and Counter Knives 54" Hansel/Bush/Kockums 48" Hansel/Bush/Kockums/Morbark 58" Kockums/Soderham 96" Precision/Soderham 66" Bush/Precision 66" Bush/Precision 48" CM&E 60" Precision/Bush 66" Precision/Soderham 58" Precision/Morbark 66" Precision/Soderham 75" Morbark/Bush 76"/84"Bush 66" Fulghum 75" Morbark/Bush 60" Fulghum 58" Soderham 112" Fulghum 96" Fulghum 27" Morbark 48" Fulghum 54" Fulghum 58" Precision/Morbark 58" Kockums/Soderham

16-3/4x4x3/8 4 Bolt 14-3/4x4x3/8 combo 19-5/8x4x3/8 deep slot, H-bbt/screws 14x5x1/2 babbit 20-1/2x4x3/8 babbit only 20-1/2x4x3/8 combo 16x4-7/16x1/4 keyhole bbt 18x4x3/8 21-1/2x3-15/16x3/8 combo 19-5/8x4x3/8 shallow slot, h-bbt only 21-1/2x4x3/8 "H" bbt 23x5x1/2 babbit 26x5x1/2 babbit 21-1/2x3-31/32x3/8 combo 11-1/2x5x1/2 babbit 19-1/4x4x3/8 combo 16-3/4x4x3/8 3 bolt 17-63/64x4-3/4x1/2 babbit 15-1/2x4-3/4x1/2 babbit 15x5x1/2 babbit 14x4x3/8 set screw 17x4x3/8 combo 19-5/8x4x3/8 shallow slot, h-bbt/screws 19-5/8x4x3/8 deep slot, h-bbt only

KSC-40C KSC-1 KSC-2D KSC-26PG KSC-86PG KSC-86PG KSC-25-2 KSC-84CPG KSC-60 KSC-2B Shallow KSC-46 KSC-7 KSC-91PG KSC-23C KSC-4 KSC-59 KSC-18 KSC-142 KSC-173Half KSC-6 KSC-58 KSC-61C KSC-2 KSC-2BD

COUNTER KNIVES 48" Bush/Morbark/Precision 60" Precision/Bush 58" Precision/Morbark 48" Fulghum 66" Precision/Soderham 75" Morbark/Bush 75" Morbark/Bush 58" Soderham 96" Precision/Progress

14-3/4x2-1/8x3/8 18x2-1/8x3/8 19-5/8x2-1/8x3/8 14x2-1/2x3/8 21-1/2x2-1/8x3/8 23x2-7/8x3/8 11-1/2x2-7/8x3/8 16-3/4x2-1/8x3/8 28x2-7/8x3/8

KSK-1 KSK-50PG KSK-60 KSK-47T KSK-42 KSK-7 KSK-11 KSK-58 KSK-49PG

We recognize, in today’s competitive world wide economy, we have to not only meet your expectations but exceed them. Our pride of performance is created within each saw we deliver. Brand new saws carry on the tradition of craftsmanship that has been taught since 1890. This along with the latest technology is used to produce saws within the critical tolerances required in today’s high speed mills. Each person at B.H. Payne is conscientiously dedicated to the highest quality workmanship and customer oriented service. New employees work under the careful tutelage of our older experienced technicians until they attain the degree of craftsmanship, professionalism and expertise that meets our standards. After a successful internship they are allowed to perform their work more independently. This insures we produce a top quality product for you, every time you order, year after year. This brochure will give you an overview of the saws we manufacture as well as other products we supply. The wide variety of requirements to custom manufacture saws make it impossible to show our total capabilities. Put another way, we have never found a saw we could not have built. We promise you’ll be getting the highest quality saw at a very reasonable price.

Sawmill Maintenance and Troubleshooting Tips For information on the setup, care and maintenance of your sawmill, see our web page at: www.paynesaws.com Under the Troubleshooting link you will find links to such useful information as:

Call for prices and for sizes not shown here. We can also supply anvils, clamps and other items in steel and carbide.

Circular Sawmills and Their Efficient Operation by Stanford L. Lundstrum A U.S. Department of Agriculture Publication Forest Service

Ask us about the new Wearmaster line!

Circular Sawmill Alignment and Maintenance by Bruce E. Cutter School of Natural Resources, University of Missouri-Columbia and Doc Jeff’s Sawdoc.com Troubleshooter


“Stronger, more stable saws are produced by craftsmen who carefully taper grind our large diameter saws, to be thicker at the eye.”

Inserted Tooth Head Saws Each socket of the inserted tooth saw is punched and milled to very precise tolerances so that the bits and shanks fit as perfectly as possible. The shoulders and backs are designed for maximum strength yet still accepting your feed rate. Every Saw is tensioned to your speed before it is shipped to you insuring it will run on your mill.

We can provide a full line of carbide tips:

Popular Inserted Tooth Bit Saw Patterns The #2 1/2 is specifically designed for fast smooth cutting, for mills of good power, fast feed and uniform high speed. Excellent for knotty timber because more teeth of this pattern can be put in a saw of given diameter that with any other pattern.

STYLE

LENGTH

THICKNESS

WG

1/2” (.500”)

1/8” (.125”)

WET

3/8” (.375”)

1/8” (.125”)

WE

3/8” (.375”)

.095”

WD

5/16” (.312”)

.095”

WX

7/16” (.438”)

1/8” (.125”)

WR

9/16” (.535”)

1/8” (.125”)

WGZ

1/2” (.500”)

.150”

WA

1/4” (.250”)

.062”

WB

9/32” (.181”)

.078”

The #3 pattern is an excellent general purpose saw and the one most recommended for portable mills. Coarser teeth than the #2 1/2 pattern require less power to operate.

Multiple Grades to Choose From! Handy Cross Reference Camco Style

The B pattern is for mills requiring a medium tooth for cutting soft, hard or frozen timber. It is also used in heavy duty edgers.

The popular F pattern is for mills requiring a fine tooth for cutting soft, hard, or frozen timber. Your best choice for general purpose sawing.

We carry a full line of hard to find bits and shanks. We welcome your inquiry. In addition to furnishing you with new blades, parts and supplies, we can also assist in troubleshooting your mill. Give us a call at (800)752-0627

Multimetals

Pac Hoe

Eagle

Ceratizit

Euro

Non

Euro

Non

Euro

Non

Euro

Non

WG

WGC

WF

EWF

WF

CWF

WF

WFC

WF

WET

WSC

WG

EWG

WG

CWG

WG

WGC

WG

WE

WEC

WE

EWE

WE

CWE

WE

WEC

WE

WD

WDC

WD

EWD

WD

CWD

WD

WDC

WD

WX

MFC

WR

WRC

C2205

UG2205

541


WHEN YOU BUY FROM B.H. PAYNE - YOU'VE BOUGHT THE BEST WE GUARANTEE IT!

Solid Tooth Saws After over a decade of distributing cobalt 12 alloy for various saw-tipping applications in the forest industry, Camco formed a subsidiary company, Advanced Powder Fusion to develop and produce APF 12, a high performance Superalloy. Our goal was to use the knowledge, experience and customer feedback gained since 1987, to indentify and improve performance in several key ares. APF 12 has exceeded our expectations. Sawmills and saw manufacturers worldwide are now utilizing the significant performance advantages of APF 12.

Our solid tooth saws are carefully finished in any tooth style your mill requires. Our most popular ones are "L" & "M" cutoff saws and swaged "A", "H" & "G" head saws as well as the solid tooth edgers. We'll be proud to duplicate any special tooth design within industry standards and tolerances. Just send us your drawing, tracing or rubbing. You'll get an estimate, a good price and a great saw.

Inserted Tooth Cutoff Saws New manufacturing techniques and innovative designs have enabled us to produce the most durable cut off saws ever. Available from 36" to 84", in R, #44, & M styles, our inserted tooth cut off saws can be manufactured with high quality steel, stellite inlaid or carbide teeth. We will custom design and deliver the finest saw for your specific needs, on schedule and at a cost that is as competitive as most you'll find.

Our Carbide Saw Line

APF 12 ProductsAvailable for: Tippers manufactured by Armstrong Mfg. – Rectangle tips, custom sizes. Tippers manufactured by Wright Machine Tool – Triangle tips and Precision Round Balls (without belly band for accuracy) Tippers manufactured by Iseli – Trapezoidal, Rectangle, Round, Triangle, and Diamond shaped rods. Also available: European style pre-tinned tips (i.e.: WG, WET series) Eased Edge tips, Strob Strips With Camco's unique process, APF 12 Superalloy can be produced in almost any shape and size to suit your specific application.

We have a full line of U.S. made strob, trim and guided edger saws for your mill. You’ll like the design of the strob saw which gives you extended life at high feed rates because it runs cooler and resists binding. Trimmer saws are made to keep on giving you smooth end cuts time after time at high production rates. Reduced waste from consistent high quality is what you will get from the guided edger saws we offer. They conform to your specifications with uniform hook angle, side clearance and plate thickness. All are made of high quality steel we are proud to stand behind. Call us to discuss your needs and our personnel will help you select the right saw for the application.


Mill Supplies B.H. Payne is your best source for saw supplies. We carry what we know to be the best. Down time is just as expensive for us as for you, so we understand quality products are necessary in any profitable mill. You’ll find we’ve priced our line of supplies right too.

Circular Saw Blades Inserted Tooth Head Saws Edger Saws Cutoff Saws Solid Tooth Saws Carbide Tipped Saws Plates for Tipping

Bandsaw Blades Wide and Narrow

Alloy Tips and Strobs Carbide and APF-12 Superalloy

Diamond and CBN Wheels Knives Chipper, Counter and Planer

Grinders for Saws Jockey, Jones, Andrus and Arsaw Electric, Air or Hand powered

Knife Grinders and Saw Sharpening Equipment Simonds, Knife Source and Hanchett

Saw Bits

Complete Filing Rooms

Carbide Saw Bits

Mill Supplies

ITCO Teeth

Files

Saw Gumming Wheels

Saw Guide Material

Norzon, Ruby, Ceramic, and Others

Knife Grinding Wheels

Coolant Solder, Flux and Babbitt

Chipper Parts

Carbide Products Pre-tinned Pre-sharp Custom Grades Custom Shapes

Hollow face Hollow top Alternate top Strob strips

Custom back angles Edger tips F2000tm cut-off saw tips Trim saw tips

Camco maintains ongoing development of specialty grades and products.


B.H. Payne & Company, Inc Saw Manufacturers PRICE SHEET

Wrenches, Swages, Files and other items Saw Wrenches Cast Wrenches

(Straight) (Offset)

Replacement Pins

$3.50

Speed Wrench (Complete) Speed Pins Saw Swage #1 Upset Swage Files 8” Mill Bastard 8” Mill Bastard (2 Round Edge) 10” Mill Bastard 10” Mill Bastard (2 Round Edge)

$42.95 $42.95

single box(12) single box(12) single box(12) single box(12)

Price List Following you will find select price sheets covering items you may be interested in. If there is something you are looking for but do not find in the following pages, please give us a call at 800-752-0627.

$77.00 $16.75

Pricing and selection subject to change without notice. Please verify upon ordering.

$89.00

All prices quoted are in US Funds, FOB factory.

$4.97 each $3.90 each $8.06 each $6.45 each $6.37 each $5.10 each $9.96 each $7.97 each

Grinders Jockey Grinder (Headsaw or Edger) Jones Grinder (one size fits all) Andrus Hand Filer

$635 $460 $235

Grinding Wheels for Jockey Ruby, White or Mix Blue Ceramic Diamond Wheel for Carbide

$12 to $17 $26.50 $89.00

Call early for same day shipping on in-stock items.


B.H. Payne & Company, Inc

B.H. Payne & Company, Inc

Saw Manufacturers

Saw Manufacturers

PRICE SHEET

PRICE SHEET

Inserted Tooth Bit Saws Diameter Inches 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72

Rim Gauge

Patterns "B", "F", #2-1/2, #3

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 7 7 7 7 7 6 6 6 6 6 6

$287 $329 $350 $392 $401 $449 $493 $544 $577 $655 $734 $810 $886 $1,011 $1,140 $1,206 $1,339 $1,393 $1,602 $1,643 $1,665 $1,788 $2,004 $2,495 $2,400 $2,989 $3,343 $3,695 $4,090 $4,431 $4,893

Standard gauges are listed. One gauge size step is available at no extra charge. Saw blades are complete with bits and shanks and ready to run. Carbide bits are available for a $2 per tooth additional charge.

Saw Bits and Shanks for Inserted Tooth Saws

Boxes of 100 Bits

9/32� or narrower Regular Standall Simalock Regular Tungsweld Regular SiChrome Regular SiChrome Stand-All SiChrome Simalock Reg. Dominator Carbide Tipped

List Price $132.00 $148.00 $148.00 $461.00 $163.00 $178.00 $178.00

5/16" kerf or wider Regular Standall Simalock Regular Tungsweld Regular SiChrome Regular SiChrome Stand-All SiChrome Simalock Reg. Dominator Carbide Tipped

List Price $145.00 $158.00 $158.00 $478.00 $176.00 $189.00 $189.00

2-4 boxes 10% $118.80 $133.20 $133.20 $414.90 $146.70 $160.20 $160.20

5-6 boxes 15% $112.20 $125.80 $125.80 $391.85 $138.55 $151.30 $151.30

7-9 boxes 18% $108.24 $121.36 $121.36 $378.02 $133.66 $145.96 $145.96

10+ boxes 20% $105.60 $118.40 $118.40 $368.80 $130.40 $142.40 $142.40

2-4 boxes $130.50 $142.20 $142.20 $430.20 $158.40 $170.10 $170.10

5-6 boxes $123.25 $134.30 $134.30 $406.30 $149.60 $160.65 $160.65

7-9 boxes $118.90 $129.56 $129.56 $391.96 $144.32 $154.98 $154.98

10+ boxes $116.00 $126.40 $126.40 $382.40 $140.80 $151.20 $151.20

$335.00

$355.00

Shanks: $7.25 each, or $4.95 each in complete boxes of 50.

B.H. Payne 2011 Catalog  

B.H. Payne 2011 Catalog

Read more
Read more
Similar to
Popular now
Just for you