Page 1


Ultra - Dependable Long Lasting High Speed Hoists Table of Contents 1

Solution Form & Accessories

2

Portable Wire Rope Hoists

3

Portable Hoist Mounting Options

4

Mounting Option Examples

5

Maxial High Speed Scaffold Hoist

6

Rack & Pinion

Construction General Contractor

Glazing

Scaffolding

Restoration

Curtain Wall

Masonry

Demolition

Water Proofing

Stucco

Swing Stage

EFIS

Roofing

Industrial Boiler Maintenance Power Plants Petro-Chemical Plants

Cement Plants Paper Mills Storage Silos


Client Solution Assessment Form ❶ How heavy? ____________________________________ ❺ Mounting on Scaffold? ____________________ ❷ How high? _____________________________________

❻ I-Beam? ________________________________

❸ Material? ___________________Need a VFD? ________ ❼ Mast Climber? ___________________________ ❹ Power supply? _________________________________

❽ Rooftop (Stand-Alone)? ___________________

Max Weight lbs

Run Height ft

Speed fpm

Volts, Phase

I‐Beam

Scaff‐Trac

Trestle Monorail

Vertical Post

❺,❻,❽

❺,❽

❼,❽

Scorpio Plus XL

400 lbs

160'

80 fpm

110V, 1Φ

X

X

X

X

New Yorker

600 lbs

350'

80 fpm

220V, 1Φ

X

X

X

‐‐

Gemini Plus

600 / 1,200 *

220' / 110' *

80 / 40 *

110V, 1Φ or 220V, 1Φ †

X

X

X

‐‐

Leo

1,000 / 2,000 *

220' / 110' *

80 / 40 *

220V, 1Φ

X

Leo XXL

1,000 / 2,000 *

400' / 200' *

80 / 40 *

220V, 3Φ

X

Leo XXL VFD

1,000 / 2,000 *

400' / 200' *

* Double-roped.

Variable up to 220V, 1Φ/ 3Φ 80 fpm *

† Must be ordered 110V or 220V - cannot be converted.

X

X

X

< 1,200 lbs

+ supports

X

X

< 1,200 lbs

+ supports

X

X

< 1,200 lbs

+ supports

‐‐

‐‐

‐‐

All Beta Max Hoist systems meet ore exceed ANSI & OSHA specification

Fixed or trolleyed? _________________________________

Accessories? ________________________________

Cantilever? _____________ How far? _________________

Longer pendants (6ft)? _______________________

Lifting in the middle of scaffold? ______________________

Need wireless controls? ______________________

Need counterbalance? ______________________________ Need power cords or boosters? ____30AMP cord for VFD? ___

Erecting or Dismantling Scaffold?

==>

Maxial

Servicing multiple levels or ==> Transporting people?

Rack & Pinion

Client Name _______________________________________ Hoist _______________________________ Units _________ Company _________________________________________ Mount ____________________________________________ Phone ____________________________________________ Mount Options ______________________________________ Email _____________________________________________ Rigging Accessories ________________________________ Address ___________________________________________ Power Accessories _________________________________ ____________________________________________________ Remote Accessories ________________________________ Have you been awarded the project? ___________________ Expected Project Start Date? _________________________ When is the bid due? ________________________________ Will you need the hoist by? ___________________________ Purchase or Rental? ________________________________ Rental Period? _____________________________________

www.BetaMaxHoist.com

TF: 800.233.5112


PORTABLE HOIST MOUNTING OPTIONS Our simplest mounting system is perfect for attaching our lighter weight hoists to existing scaffolding. This mount pivots 180 degrees, allowing convenient unloading at work level. Maximum load lift is 400 lbs.

POST MOUNT

Our heavy-duty mounting system is perfect for our large capacity hoists that specify monorail mounting. This mount is easily installed for between-the-floor or rooftop lifting, but must be properly counterbalanced. This system has a vertical capacity of up to 2000 lbs with a TRESTLE 3.5 ft outward cantilever. MONORAIL Flexibility and versatility are delivered with our I-Beam Mounting Trolley. The addition of a rolling I-Beam Trolley Top allows many Beta Max Hoists to adapt to exisitng I-Beams. If the horizontal trolley is not necessary, Beta Max offers a Fixed I-Beam Top which firmly holds the hoist stationary on to the I-Beam. I-Beam suspension brackets are available for hanging I-Beam to scaffold frames as shown in illustrations.

I-BEAM SUSPENSION BRACKET

I-BEAM

I-BEAM TROLLEY

Our most popular mounting systems attaches in minutes, with no tools, to existing scaffolding and is used with all Beta Max hoists. It features a 3.5 ft overhang on conventional 7 ft spaced, walk-thru scaffold frames. Unlimited system lengths are available using add-on 7 ft Scaff-Trac extensions. The Scaff-Trac has a weight limit of 1200 lbs when used with conventional scaffolding. The Mac-Trac system is also available for use with 5 ft masonSCAFF-TRAC type scaffold frames.

ROLLER TOP

PORTABLE HOIST ACCESSORIES DOUBLE ROPE KIT Double the lifting capacity of your hoist

WIRELESS DUAL REMOTE KIT

COUNTER WEIGHT CLAMP ASSEMBLY

Easily attaches to Monorail and Scaff-Trac with clamps. Use with 50 lb suspended staging counterweights

BASKET (with spreader bar) 400 lb / 800 lb capacity

SPREADER BAR

Perfect for lifting buckets or cross braces

MUD TUB BRICK FORK

400 lb capacity 29.25Lx7.5Wx37.5H Max brick size 2.5x3.8

BLOCK FORK

800 lb capacity 24.5Lx24.5Wx34.5H For lifting 8x8x16 block

BOOSTER TRANSFORMER PENDANT CONTROLLER 110V or 220V, works in-line with the power supply to boost amperage

.25 yard, 900 lb capacity 42Lx27Wx18H .33 yard, 1300 lb capacity 42Lx27Wx28H

PENDANT EXTENSION 25’ 85’ & 125’ lengths

DUMPSTER BUCKET 24, 31, 40 gal. capacities

SCAFFOLD FRAME FORK 600 lb capacity 36.25Lx15Wx25H Holds 10 scaffold frames

POWER CORD EXTENSION DUAL CONTROL PKG. Heavy Duty, 10 gauge Allows use of two separate power cords sold for either controller pendants. 110V or 220V hoists.


Counterweights

I-Beam Suspension Bracket is 1 complete with 1 Saddle â&#x20AC;&#x201C; Normally 2 or more per system

I-Beam Hoist System

I-Beam Trolley

Double Rope Kit includes Shackle

Scaff-Trac Hoist System

Roller Top is needed for Scaff-Trac

Scaff-Trac is complete with 2 Saddles

Beta Max Hoist Systems


I-Beam Trolley Adjusts 2.66” – 6” Flange

To attach the anti twist roller accessory. Remove the hoist from the I beam. Remove two top bolts, the center bolt and the one closest to the front of the drum. Using included longer bolts, attach roller top as shown in attached photos. Re mount the hoist to the I beam. Adjust the height of the rollers so that they contact the bottom side of the I beam and tighten the mounting bolts.

Anti-Twist bar with rollers is included with every I-Beam Trolley Top

Beta Max I-Beam Trolley


Nico Press

Cable Weight

Double Rope

Remove hook from shackle when double roping

Swivel Jaw Eye Shackle attaches here and comes with the double roping kit.

Beta Max Double Roping Hoist


Performance

without

Compromising Safety

       

Safety Features  Easy Cable Replacement (Beta Max provides clamps and crimp)  Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down  Non-rotating cable helps keep loads from spinning  Upper-limit Switch Assembly stops the hoist instantly when activated  Sturdy Electrical Controller equipped with thermal overload sensing device  Water Tight Connectors


SCORPIO PLUS XL Plus XL: 50-33-1

H 160ft W 400lbs

HOIST FEATURES •

Perfect for light weight, smaller projects

Very mobile on a jobsite due to super light

in confined spaces 95lb weight

Confined and hard to reach spaces made easy

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Vertical Post Mounting System easily attaches to the leg of scaffolding and pivots 180°, allowing convenient loading and unloading of materials at any work level

Maximum safety and efficient alternative to rope & pulley systems, cranes,

Installs easily on existing scaffold systems, work platforms, I-Beams, and rooftop

with a portable hoist

and forklifts

mounting options

INDUSTRIES SERVED SAFETY FEATURES

• Scaffolding • Masonry • Restoration • Construction • Stucco

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


SCORPIO PLUS XL Plus XL: 50-33-1

H 160ft W 400lbs

SPECIFICATIONS Set Up

Single Line

Lift Capacity

400 lbs

Lift Speed

80 fpm

Scorpio Plus XL Lift Height

160’

A/C Power

110v, 1Φ, 1HP

Horsepower

1 HP

Mounting Options

I-Beam Trolley, Mac-Trac, Scaff-Trac, Trestle Monorail, Vertical Post

MOUNTING OPTIONS

I-BEAM TROLLEY

MAC-TRAC

SCAFF-TRAC

TRESTLE MONORAIL

VERTICAL POST

ACCESSORIES • Brick Fork • Block Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer • Scaffold Frame Fork 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


60-1

60-53

50-33-1

REINFORCED POST MOUNT COUNTERWEIGHT CLAMP SET

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included CANNOT BE DOUBLE ROPED

60-1

60-53

400

LIFT CAP. (LBS.)

DESCRIPTION

SCORPIO XL

50-33-1

PART NO.

MODEL

PART NO.

80

110 V 1 PHASE

AC POWER (PHASE)

SPECIFICATIONS

SPEED (FPM)

Beta Max Post Mount Hoist Mounting System

1 HP

MOTOR HP

w/swivel clamps for use on round 2”

SCORPIO XL

160

LIFT HT. (FT.)

60

12

WEIGHT

90

WEIGHT


DIMENSION – SCORPIO PLUS XL POST MOUNT


60-1

20-43-2

Includes 2 Saddles

50-33-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame and I-Beam NOT Included. No Double Rope Kit Available

60-1

60-41

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) COUNTERWEIGHT CLAMP SET

20-43-2

400

DESCRIPTION

SCORPIO XL

50-33-1

LIFT CAP. (LBS.)

BetaMax PART NO.

MODEL

BetaMax PART NO.

110 V 1 PHASE

AC POWER (PHASE)

Beta Max Scaff-Trac Hoist Mounting System

60

150

WEIGHT

90

WEIGHT

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

1 HP

MOTOR HP

10

SPECIFICATIONS

80

SPEED (FPM)

Use w/Scorpio Only

160

LIFT HT. (FT.)


20-43-2

ROLLER TOP Scorpio XL only


60-1

60-40

20-44-1

50-33-1

I-BEAM TROLLEY TOP (Fits flange of 2.66 – 5.25) I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame and I-Beam NOT Included. No Double Rope Kit Available

60-1

60-40

20-44-1

400

LIFT CAP. (LBS.)

DESCRIPTION

SCORPIO XL

50-33-1 BetaMax PART NO.

MODEL

BetaMax PART NO.

110 V 1 PHASE

AC POWER (PHASE)

SPECIFICATIONS

80

SPEED (FPM)

1 HP

MOTOR HP

Beta Max I-Beam Trolley Hoist Mounting System

w/swivel clamps for use on round 2”

use w/ALL HOISTS

Use w/Scorpio XL Only

160

LIFT HT. (FT.)

60

29

38

WEIGHT

90

WEIGHT


I-BEAM TROLLEY TOP (Fits flange of 2.66 – 5.25)

Use w/Scorpio XL Only

DIMENSION – SCORPIO PLUS XL MOUNTED ON I-BEAM

20-44-1


NEW YORKER 50-18

H 350ft W 600lbs

HOIST FEATURES •

Perfect for high reach, medium duty projects

Long lasting performance with

minimum maintenance required

Confined and hard to reach spaces made easy

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

Maximum safety and efficient alternative to rope & pulley systems, cranes, and forklifts

Installs easily on existing scaffold systems, work platforms, I-Beams, and rooftop

Flexible I-Beam Mounting Option works with and configures to each to each

with a portable hoist

mounting options

unique jobsite SAFETY FEATURES

INDUSTRIES SERVED • Scaffolding • Restoration • Stucco

• Masonry • Construction • Demolition

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


NEW YORKER 50-18

H 350ft W 600lbs

SPECIFICATIONS Set Up

Single Line

Lift Capacity

600 lbs

Lift Speed

80 fpm

Lift Height

350’

A/C Power

220v, 1Φ, 1.5HP

Horsepower

1.5HP

Mounting Options

Fixed I-Beam, I-Beam Trolley, Scaff-Trac, Trestle Monorail, Mac-Trac

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES • Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


GEMINI PLUS 110V: 50-11 | 220V: 50-8

H 220/110ft W 600/1200lbs

HOIST FEATURES •

Hoist of choice for medium duty projects

Largest 120v Beta Max Hoist on the market

Installs easily on existing scaffold systems,

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Flexible I-Beam Mounting Option works with

Confined and hard to reach spaces made easy with a portable hoist

Maximum safety and efficient alternative to rope & pulley systems, cranes,

work platforms, I-Beams, and rooftop mounting options

and configures to each unique jobsite

and forklifts

Long lasting performance with minimum maintenance required

SAFETY FEATURES

INDUSTRIES SERVED • Scaffolding • Restoration • Stucco

• Masonry • Construction • Demolition

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


GEMINI PLUS 110V: 50-11 | 220V: 50-8

H 220/100ft W 600/1200lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

600 lbs

1200 lbs

Lift Speed

80 fpm

40 fpm

Lift Height

220’

110’

A/C Power

110v, 1Φ or 220v, 12 Amp, 1Φ

Horsepower

1.5HP

Mounting Options

Fixed I-Beam, I-Beam Trolley, Scaff Trac, Trestle Monorail

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES • Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


60-1

60-40

50-11 or 50-8

60-21

SPECIFICATIONS

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE 1.5 HP

1.5 HP

MOTOR HP

w/swivel clamps for use on round 2”

use w/ALL HOISTS

use with GEMINI/NEW YORKER/LEO

80 40* 80 40*

SPEED (FPM)

Hoist Mounting System

I-BEAM TROLLEY TOP w/ lower wheel assembly I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

LIFT HT. (FT.) 220 110* 220 110*

Every Beta Max Hoist comes with wire rope Pendant Control Standard Everyand Beta6FT Max Hoist comes with wire NOTE: Scaffold Frame NOT Included rope and 6FT Pendant Control Standard *NOTE: Requires Double Rope KitIncluded (BM Part # 70-9)Beta Max I-Beam Trolley Scaffold Frame NOT

70-9

60-1

60-40

60-21

BETA MAX PART NO.

LIFT CAP. (LBS.) 600 1200* 600 1200*

DESCRIPTION

GEMINI PLUS 110V GEMINI PLUS 220V

50-11 50-8

MODEL

BETA MAX PART NO.

60

29

SHIPPING WEIGHT 50

176

174

WEIGHT


I-BEAM TROLLEY TOP w/ lower wheel assembly

DIMENSION – GEMINI 110V/220V TROLLEY TOP MOUNTED ON I-BEAM

60-21


FIXED I-BEAM BRACKET (flange width 2.66 to 4.25)

DIMENSION – GEMINI 110V/220V FIXED MOUNTED ON I-BEAM

60-8


60-1

60-41

50-11 or 50-8

70-9

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-9)

50-7

60-1

60-41

SPECIFICATIONS

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE 176

1.5 HP

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

60

150

SHIPPING WEIGHT 18

174

WEIGHT

1.5 HP

MOTOR HP

use with GEMINI/NEW YORKER/LEO

80 40* 80 40*

SPEED (FPM)

Beta Max Scaff-Trac Hoist Mounting System

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) COUNTERWEIGHT CLAMP SET

LIFT HT. (FT.) 220 110* 220 110*

50-7

LIFT CAP. (LBS.) 600 1200* 600 1200*

DESCRIPTION

GEMINI PLUS 110V GEMINI PLUS 220V

MODEL

BETA MAX PART NO.

50-8

50-11

BETA MAX PART NO.


ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON SCAFF_TRAC

50-7


60-29

60-41

50-11 or 50-8

70-9

60-33

SPECIFICATIONS

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE 176

1.5 HP

180

66

w/square clamps for use on square 2.5”

150

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding use w/NEW VERSION SCAFF-TRAC

SHIPPING WEIGHT 18

174

WEIGHT

1.5 HP

MOTOR HP

use with GEMINI/NEW YORKER/LEO

80 40* 80 40*

SPEED (FPM)

Beta Max Trestle Monorail Hoist Mounting System

COUNTERWEIGHT CLAMP SET

add to 60-41 to make complete Trestle/Monorail for 1200 lbs. capacity

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-9)

50-7

60-29

60-33

60-41

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) TRESTLE/MONORAIL KIT

LIFT HT. (FT.) 220 110* 220 110*

50-7

LIFT CAP. (LBS.) 600 1200* 600 1200*

DESCRIPTION

GEMINI PLUS 110V GEMINI PLUS 220V

MODEL

BETA MAX PART NO.

50-8

50-11

BETA MAX PART NO.


ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON TRESTLE

50-7


ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON TRESTLE

50-7


LEO/LEO XXL Leo 1 Phase: 50-40 | Leo XXL: 50-25

H 220/110ft H 400/200ft W 1000/2000lbs

HOIST FEATURES •

Hoist of choice for heavy-duty, high lift projects

Long lasting performance with minimum

maintenance required

Confined and hard to reach spaces made easy with a portable hoist

Maximum safety and efficient alternative to rope & pulley systems, cranes, and forklifts

Installs easily on existing scaffold

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

systems, work platforms, I-Beams, and rooftop mounting options

Flexible I-Beam Mounting Option works with and configures to each unique INDUSTRIES SERVED jobsite •

SAFETY FEATURES

• • • •

Scaffolding Masonry Stucco Glazing

• Demolition • Restoration • Construction

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


LEO/LEO XXL Leo 1 Phase: 50-40 | Leo XXL: 50-25

H 220/110ft H 400/200ft W 1000/2000lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

1,000 lbs

2,000 lbs

Lift Speed

80 fpm

40 fpm

LEO Lift Height

220’

110’

LEO XXL Lift Height

400’

200’

A/C Power

Leo 220v, 1Φ or Leo XXL 220v, 3Φ *Cannot be field converted

Horsepower

1 Phase: 2HP, 3 Phase: 3.3HP

Mounting Options

Scaff Trac, Trestle Monorail, I-Beam Trolley, Fixed I-Beam

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES • Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


60-1

60-40

60-21

50-40 or 50-25

60

w/swivel clamps for use on round 2”

60-1

29

use w/ALL HOISTS

I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

50

WEIGHT

210

200

WEIGHT

60-40

3.3 HP

2 HP

MOTOR HP

SPECIFICATIONS

220 V 1 PHASE 220 V 3 PHASE

AC POWER (PHASE)

use with GEMINI/NEW YORKER/LEO

80 40* 80 40*

SPEED (FPM)

I-BEAM TROLLEY TOP w/ lower wheel assembly

220 110* 400 200*

LIFT HT. (FT.)

60-21

DESCRIPTION

1000 2000* 1000 2000*

LIFT CAP. (LBS.)

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit Beta Max I-Beam Trolley (BM Part # 70-2) Hoist Mounting System

70-2

LEO XXL

50-25 BETA MAX PART NO.

LEO

MODEL

50-40

BETA MAX PART NO.


I-BEAM TROLLEY TOP w/ lower wheel assembly

DIMENSION – LEO 220V/3PH TROLLEY TOP MOUNTED ON I-BEAM

60-21


60-41

60-1

50-7

SCAFF-TRAC SINGLE LINE CAPACITY ONLY WITH LEO HOIST

80

80

220 V 1 PHASE 220 V 3 PHASE

AC POWER (PHASE)

SPECIFICATIONS

SPEED (FPM)

3.3 HP

2 HP

MOTOR HP

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

use with GEMINI/NEW YORKER/LEO

400

220

LIFT HT. (FT.)

Beta Max Scaff-Trac Hoist Mounting System

COUNTERWEIGHT CLAMP SET

(1200 LB. CAP)

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included.

Includes 2 Saddles

50-40 or 50-25

60-1

60-41

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING

50-7

1000

DESCRIPTION

LEO XXL

50-25

1000

LIFT CAP. (LBS.)

BETA MAX PART NO.

LEO

MODEL

50-40

BETA MAX PART NO.

60

150

SHIPPING WEIGHT 18

210

200

WEIGHT


ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – LEO 220V/3PH ROLLER TOP MOUNTED ON SCAFF_TRAC

50-7


60-41

60-29

50-40 or 50-25

* 70-2

LIFT CAP. (LBS.)

AC POWER (PHASE)

80 220 V 40* 1 PHASE 80 220 V 40* 3 PHASE SPECIFICATIONS

SPEED (FPM)

3.3 HP

2 HP

MOTOR HP

w/square clamps for use on square 2.5”

EXTRA SUPPORT BRACKET TO COMPLETE 2000 LB. CAP. TRESTLE/MONORAIL

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding use w/NEW VERSION SCAFF-TRAC

use with GEMINI/NEW YORKER/LEO

220 110* 400 200*

LIFT HT. (FT.)

Beta Max Trestle Monorail Hoist Mounting System

COUNTERWEIGHT CLAMP SET

add to 60-33 & 60-41 to make complete Trestle/Monorail for 2000 lbs. capacity-required for maximum capacity

TRESTLE/MONORAIL SUPPORT BRACKET

add to 60-41 to make complete Trestle/Monorail for 1200 lbs. capacity

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) TRESTLE/MONORAIL KIT

1000 2000* LEO XXL 1000 2000* DESCRIPTION

LEO

MODEL

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-2)

50-7

60-23

60-29

60-23

60-33

60-41

50-7

PART NO.

50-25

50-40

BETA MAX PART NO.

66

32

180

150

SHIPPING WEIGHT 18

210

200

WEIGHT


ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – LEO 220V/3PH ROLLER TOP MOUNTED ON TRESTLE MONORAIL

50-7


LEO XXL VFD Leo XXL wired: 50-58 | Leo XXL wireless: 50-58A

H 400/200ft W 1000/2000lbs

HOIST FEATURES •

Hoist of choice for glazing, masonry,

Ideal for precision placement of

demolition, construction and restoration companies delicate materials

Confined and hard to reach spaces made

Variable Frequency Drive allows for

Second operating speed graduates

VFD allows Three Phase motor to operate on

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

Flexible I-Beam Mounting Option works with and configures to each to each

easy with a portable hoist

smooth acceleration and deceleration of hoist at approximately 10 ft/sec

at approximately 80 feet per minute

Single Phase power

unique jobsite SAFETY FEATURES

INDUSTRIES SERVED • • • •

Scaffolding Masonry Stucco Glazing

• Demolition • Restoration • Construction

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


LEO XXL VFD Leo XXL wired: 50-58 | Leo XXL wireless: 50-58A

H 400/200ft W 1000/2000lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

1,000 lbs

2,000 lbs

Lift Speed

80 fpm

40 fpm

LEO XXL Lift Height

400’

200’

A/C Power

220v-13amp

220v-13amp

Horsepower

3 Phase: 3.3HP

Mounting Options

Scaff Trac, Trestle Monorail, I-Beam Trolley, Fixed I-Beam

MOUNTING OPTIONS

SCAFF-TRAC

TRESTLE MONORAIL

FIXED I-BEAM

I-BEAM TROLLEY

ACCESSORIES • Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


60-1

800-233-5112

60-40

50-58 or 50-58A

60-21

LEO XXL VFD WIRELESS (50-20-3)

50-58A

1000 2000*

1000 2000*

LIFT CAP. (LBS.)

I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

60-40

220 V 1 or 3 PHASE 220 V 1 or 3 PHASE

AC POWER (PHASE)

SPECIFICATIONS

Variable Speed

Variable Speed

SPEED (FPM)

3.3 HP

3.3 HP

MOTOR HP

w/swivel clamps for use on round 2”

use w/ALL HOISTS

use with GEMINI/NEW YORKER/LEO

400 200*

400 200*

LIFT HT. (FT.)

Every Beta Max VFD Hoist comes with wire rope and 20FT Pendant Control Standard. NOTE: Scaffold www.BetaMaxHoist.com Beta Max I-Beam Trolley Frame NOT Included. Hoist Mounting System * Capacity with Double Rope Kit

* 70-9

60-1

I-BEAM TROLLEY TOP w/ lower wheel assembly

60-21

DESCRIPTION

LEO XXL VFD WIRED (50-20-2)

50-58

BETA MAX PART NO.

MODEL

BETA MAX PART NO.

60

29

50

WEIGHT

280

280

WEIGHT


200'

40fpm

400'

80fpm

Height XXL

Speed

800-233-5112

220V, 3Ф OR 220V, 1Ф

2000lbs

1000lbs

Payload

Power

Double Line

Single Line

LEO XXLVFD

www.BetaMaxHoist.com

Two hand held wireless controllers compliment this powerful tool by creating wireless freedom from long cumbersome pendant cords. This allows the worker waiting to receive/ place the panel to have control of the hoist and the payload.

When the hoist is used on a single line it has a 1000lb. capacity. The double rope kit that when installed, increases the hoists lifting capacity to 2000lbs.

The hoist is available with an extra long drum that allows for 400ft. of operational lifting height.

Two programmed speed sets are standard but, additional speed setting are available. The standard slow speed is 8 ft. per minute, for toggling materials into place and precision placement. The second set will smoothly graduate up to 80ft. per minute, for quicker movement between floors.

The Beta Max Leo XXL Hoist is our largest capacity portable hoist designed for heavy duty long lifts.

Leo XXL Variable Speed Hoist


800-233-5112

www.BetaMaxHoist.com

Glass Installation on the Job Site


800-233-5112

www.BetaMaxHoist.com

Beta Max Hoist in the News


800-233-5112

www.BetaMaxHoist.com

World Trade Center Tower 4 and 1 Project


Service

Dealer ROI

Maxial Hoist

Mounting Options

p Hoists Wire Rope

Finding Customers

Corner to Corner Parallel to the Building


I-BEAM: TROLLEY & FIXED Capacity: 2000lbs

FEATURES FIXED I-BEAM •

Fixed I-Beam option firmly holds the hoist stationery. Perfect for moving materials in confined spaces like the interior of scaffolding or an elevator shaft.

Fixed I-Beam Top is compatible with I-Beams with a flange width of 2.66’-5.25’

I-BEAM TROLLEY

FIXED I-BEAM: 60-8

Material delivery made easy with I-Beam

Customize forward and backward cantilever to your unique job site requirements

Adjustable Flange Widths of 2.66’-5.25’ allows Trolley to attach to standard I-Beams allowing for easy installation on any jobsite

Perfect for heavy duty projects

Suspension Brackets allow you to install your own I-Beam to existing

Suspension Brackets allow you to install your own I-Beam for easy accessibility anywhere on the jobsite that has scaffolding

Counterweight Clamp Assembly helps balance overall weight distribution,

All Beta Max Mounting Systems can be tailored to your jobsite specifications

Trolley that moves along the full length of the beam

scaffolding anywhere on the jobsite

installs easily and accommodates your weights

COMPONENT LIST • • • • •

I-BEAM TROLLEY: 20-44-1 | 60-21

Suspension Brackets: 60-40 Fixed Top: 60-8 Trolley Top: 60-21 Counter Weight Clamp Assy. 60-1

Scorpio Trolley: 20-44-1

COMPATIBLE HOISTS • • • •

Scorpio Plus & Scorpio Plus XL Gemini Plus New Yorker Leo & Leo XXL

Scaffolding frames should always be securely assembled and counter-balanced appropriately. Beta Max is not responsible for providing I-Beams or counterweights for the Counterweight Clamp Assembly. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoist systems.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

101510


I-BEAM: TROLLEY & FIXED Capacity: 2000lbs

SUSPENSION BRACKET

COUNTERWEIGHT CLAMP ASSEMBLY

I-BEAM TROLLEY Part Number: I-Beam Trolley: 20-44-1 (Scorpio Plus) I-Beam Trolley: 60-21 (Gemini, New Yorker, Leo & Leo XXL)

SUSPENSION BRACKET

COUNTERWEIGHT CLAMP ASSEMBLY

I-BEAM FIXED Part Number: 60-8 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


800-233-5112

www.BetaMaxHoist.com

Attach to mast climbers for getting material up and down quicker and more efficiently.

Ability to have 7â&#x20AC;&#x2122; and 8â&#x20AC;&#x2122; cantilever with a Rolling Roof Rig.

Variety of Rigging Options


800-233-5112

Rigging on casters for the top of buildings on between floors for ease of movement, no rerigging.

www.BetaMaxHoist.com

Make long runs and cantilever out to desirable lengths.

Variety of Rigging Options


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Compliments of Designed Equipment

Apply Beta Max Hoists To Your Applications

Sta and A Alone Sy ystem ms


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Stand Alone Systems


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Stand Alone Systems


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Attached to Scaffold Wrap


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Compliments of Trainor Glass

Compliments of Benson Global

Attached to Floor Joist Parallel to the Building


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Compliments of Designed Equipment

Swing Stage and Beta Max


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Compliments of Designed Equipment

Swing Stage and Beta Max


Service

Dealer ROI

Maxial Hoist

Mounting Options

Wire Rope p Hoists

Finding Customers

Compliments of Designed Equipment

Swing Stage and Beta Max


MAXIAL H 125/175ft W 450lbs

HOIST FEATURES •

Hoist of choice for expedited Scaffold Erection & Dismantlement for over 20 years

Up to 20% more efficient use of man power, resulting in less worker exhaustion or risk

of injury and greater productivity •

Perfect jobsite partner for Industrial Boiler Maintenance - engineered to fit easily

through boiler access ports for system scaffold E&D

Narrow Track System option available for

Multi-purpose hoist solution delivers

Durable lightweight design that is easy to

Standard and narrow track systems available

Customized operational heights available

Long lasting performance with minimum maintenance required

Boiler Access Ports less than 24” wide

materials to the job level after scaffold is in place transport and install with no tools required

INDUSTRIES SERVED SAFETY FEATURES • • • •

• Scaffolding

• Construction

• Industrial Boiler Maintenance Water tight Connectors Universal Carriage locking device Upper and lower stopping device keeps hoist on the track UL and CUL Listed Enclosed Panels for both the US and Canada

All high speed wire rope hoists are ANSI & OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

082510


MAXIAL H 125/175ft W 450lbs

SPECIFICATIONS Set Up Lift Capacity

450 lbs

Lift Speed

80 fpm

Lift Height*

125 ‘or 175’

Wire Rope Length

250 ft (1/4” GAC) /350 ft (3/16” GAC)

A/C Power

110v, 20amp, 1 Ф. Optional 220v available

Track Wdith

24” Standard, 15” Narrow

* Customized operational heights available. All measurements are based on a standard Maxial system.

MAXIAL SYSTEM COMPONENTS* Baskets (easily interchanged for payload)

Frame Scaffold Carrier 5’4” L x 1’6” D x 6’ H

Universal Platform 2’6” L x 1’5” D x 3’ H

Systems Scaffold Carrier 2’ L x 1’1” D x 6’ H

*All Maxial Hoist systems are customized by project operational height. Components vary.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


Industrial Applications  Boiler Room ‐ Power Plant Increase Profits While Decreasing Labor  Costs & Ensuring Workers Safety g y

Bridges – Use Multiple Maxials For Increased  Production & Complete More Projects Per Year

Increase Safety & Better Allocate Labor  


Beta-Max Maxial Track Hoist System I have worked in the scaffolding industry since 1988. In the early 1990’s I was introduced to a machine that changed the entire playing field of that industry. This is my testimonial… The Beta Max Maxial Track Hoist was demonstrated to me, a branch manager, and the owner of a small scaffolding company. I had heard of this machine through acquaintances in the industry, but had never witnessed the use of one. I was very impressed. It built very quickly and attached directly to the system scaffold that we used for the demo. The 3 of us were immediately sold, and purchased that demo model with 100’ of track. My relationship with Beta-Max started on that day. Our company quickly learned that this machine could replace the old daisy chain (man-line) of equipment from the ground to the erection point in the air. The company made great advances in profitability, and our work load utilizing this machine. Increases in our labor revenues and our job completion time(s), made for profit margins unheard of before. Not to mention being able to generate more work for our employee’s. Soon we needed more track and another unit. After leaving that company, I encountered many other companies utilizing this machine. Many had multiple units and countless track sections. We would use 2, 4, or 6 machines in a boiler. The ground crew would generally consist of 5 laborers and a supervisor. The hoist crew would generally consist of 2 laborers, and 2 hoist operators. This would feed the crew above constructing the scaffold, generally 4 to 12 men including a supervisor. Crews were established according to the actual size of the scaffold to be built. Some of the boilers we constructed were well over 200 feet high, and bridges over 400’ tall. The Maxial Track hoist builds right with the scaffolding, as you go up one section at a time. Now, there are other hoist systems. I have seen many different hoists and pulleys used to eliminate the man line (or daisy chain), but none meet the safety aspect or simplicity of the Maxial Track system. You don’t have to fuel it or have wide open area like a forklift; it uses either 120V or 240V electricity that is readily accessible on most jobsites; and it will not wear out, like a man pulling a rope and bucket. The hoist builds right with the scaffolding as you go. Just add more tracks, extend the cable, and your back to work. I have personally used these systems on bridge work, commercial construction, industrial construction with frame scaffold, system scaffold, or tube and clamp type scaffold. You can use any math formula you wish, but dollar for dollar you will not hire anyone who can perform this amount of work; without the breaks, the fatigue, or the wear and tear as the Maxial Track hoist. Using 2 machines doubles your production instantly, and provides for back-up in the unlikely event of machine failure or break down. The Maxial Track hoist packs easily into a small covered trailer, and travels with your crew or equipment. The units are low maintenance, easy to care for, and very simple to operate using a pendant control. There is simply no other way to go. Sincerely, Brian Hill Florida Division Manager at American Construction Hoist West Palm Beach, Florida Area

www.BetaMaxHoist.com

1-800-233-5112


Jobs that I have participated in, using the Beta-Max Maxial Track hoist: Power Plants across America: Big Rivers Corporation, Tennessee Valley Authority, Southern Companies, Gulf Power, Florida Power & Light, Jacksonville Electric Authority, Duke Energy, and American Electric Power. Pulp & Paper Industry: ITT Rayonier, Georgia-Pacific Corporation, International Paper, Kimberly-Clark, Weyerhaeuser, & Proctor & Gamble Company. Bridge Work: Bay Bridge Lead Abatement Annapolis, MD (Campbell Painting Corporation) Hospital Work: Flagler Hospital Addition St. Augustine, FL (Patent Construction Systems) Stadium Work: Jacksonville Municipal Stadium Jacksonville, FL Ben Hill Griffin Stadium Gainesville, FL Doak Campbell Stadium Tallahassee, FL

www.BetaMaxHoist.com

1-800-233-5112


Rack and Pinion 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.

Will you want to convey just material ____ or both man & material _______? Will you need to install in the interior ____ or exterior ____ of the structure? Is there a defined exterior footprint area ______or internal shaft way ______ size restriction? What will your maximum operational load / offload height be ________? What variety of Materials will you be lifting _______________________? How high Do you need to lift this material _______________________? Do you have a single item with a defined lifting weight requirement: _______? How many levels will you be servicing: ________? If conveying personnel how many Landing Gates: _______? Will you need to go the roof level? Yes ____ / No ____? If going to roof level is there Parapet Wall? Yes ____ / No ____ Height ____? Will you be anchoring to the main structure ____ or scaffolding ____? Will you be attaching to a new structure ____ or an existing structure____? Is the structure commercial / residential ____ or industrial / manufacturing ____? If attaching to the main structure is it standard floor slab ____ or industrial steel beam ____? If attaching to the main structure is there an exterior skin / veneer ____? If attaching to the main structure is the exterior skin / veneer removable ____? If needed can you drill through the veneer to get to the floor slab attachment point ____? Have you been Awarded the project ____ or are you Bidding ___ on this project? When is the bid due _______? Is it a Public ___ or Private ___ Bid? Do you know how many may be bidding on this project? ____. Expected Project Start Date____________ Hoist needed by? ______________________ Rental period: From _______ To _______? Expected number of monthâ&#x20AC;&#x2122;s ____? Will you require a Tech Supervisor to assist with Install ____ or a full Turn Key ____ install? Will the Job Site be: Union ___ / Private ___ / Govmnt ___ / Military ___ / Open Shop ___ ? Do you have prior experience with installation ____ / operation ____ / removal of a R&P hoist? Will you need to move the hoist to different locations on the job site during the project? ____ ?

We provide you with: 1. Wall Ties to anchor to the structure within every 20ft. 2. Pull Out & Shear Forces that the structure you are attaching to will need to accommodate 3. Concrete support pad surface dims. 4. Downward Dynamic load forces the hoist will exerted on your installed concrete pad. ADDITIONAL NOTES: _______________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ For additional help or any assistance at all with your Beta Max Portable Material Hoists, Maxial Scaffold Hoist or Commercial Project please contact: Ken Barrett, National Sales and Marketing at Beta Max Hoist: 321-482-6612 cell, 321-956-9388 or kbarrett@betamaxhoist.com www.BetaMaxHoist.com

TF 1-800-233-5112 â&#x20AC;&#x201C; Ken Barrett Direct 321-956-9388


MAX CLIMBER 1000MB MATERIAL HOIST

H 400ft W 1000lbs

HOIST FEATURES •

Small footprint fits perfectly in the most

Fold down ramp allow materials to be

rugged and confined spaces

loaded and unloaded without double and triple handling

Dedicated cargo carriage engineered to pivot 90° to face structure or deck for ease of loading or unloading materials

Scaffold erection and dismantlement made easy with this material hoist

Installation efficiency ensured with self erecting feature - NO crane required

Optional VFD controller allows for both single and three phase operation

Can attach to scaffolding or anchor directly to the building

Can be engineered for custom job site application

INDUSTRIES SERVED SAFETY FEATURES • • • • • •

Commercial: Construction, Demolition, Masonry, Restoration, Scaffold Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

Upper, Lower and Intermediate Floor Stop switches integrated into system Manual brake release lever in case of power interruption during use Failsafe brake holds the load securely when not lifting or lowering loads Sensors detect when basket is in load or unload mode and hoist will not operate Removable overhead protection keep workers safe during load and unload UL and CUL Listed Enclosed Panels for both the US and Canada

All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090910


MAX CLIMBER 1000MB MATERIAL HOIST

H 400ft W 1000lbs

SPECIFICATIONS Set Up Lift Capacity

1000 lbs

Lift Speed

80 fpm

Maximum Anchored Height

400 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

64”x64”

Mast Sections

75lbs per 5ft section

A/C Power

Standard Controller: 220v, 20amp, 3 Ф Optional VFD Controller: 220v, 30amp, 1 Ф

SYSTEM CONFIGURATION

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


MAX CLIMBER 2000MB MATERIAL HOIST

H 500ft W 2000lbs

HOIST FEATURES •

Small footprint fits perfectly in the most

Streamline material delivery to job level

rugged and confined spaces

with dedicated cargo carriage

Installation efficiency ensured with self erecting feature - NO crane required

Three fold down ramps allow materials

Can attach to scaffolding or anchor directly to the building

Fold out installation platform

Durable aluminum car wall panels with car support frame and mast sections of

Can be engineered for custom job site application for temporary or

to be loaded and unloaded without double and triple handling

guarantees faster and easier access when installing wall ties

hot dip galvanized steel permanent use

INDUSTRIES SERVED SAFETY FEATURES • • • • • •

Commercial: Construction, Demolition, Masonry, Restoration Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

Upper, Lower and Intermediate Floor Stop switches integrated into system Manual brake release lever in case of power interruption during use Failsafe brake holds the load securely when not lifting or lowering loads Removable overhead protection keep workers safe during load and unload Sensors detect when basket is in load or unload mode and hoist will not operate Fold down loading and unloading ramps with guard rails to ensure worker safety

All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090110


MAX CLIMBER 2000MB MATERIAL HOIST

H 500ft W 2000lbs

SPECIFICATIONS Set Up Lift Capacity

2000 lbs

Lift Speed

80 fpm

Maximum Anchored Height

500 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

112” x 91”

Mast Sections

102lbs per 5 ft section

A/C Power

Standard Controller: 220v, 30amp, 3 Ф Optional Phase Converter: 220v, 60amp, 1 Ф

SYSTEM CONFIGURATION

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


MAX CLIMBER 2000PMB MAN & MATERIAL HOIST

H 500ft W 2000lbs

HOIST FEATURES •

Small footprint of 8ft x 8ft fits perfectly in

Streamline material delivery to job level

the most rugged and confined spaces

with dedicated, enclosed cargo carriage

Installation efficiency ensured with self erecting feature and dedicated one piece base system comes to the job site pre-assembled

Fold out installation platform

Can attach to scaffolding or anchor directly to the building

Call Box Option can be installed at each floor landing gate and allows hoist operator

Durable aluminum car wall panels with car support frame and mast sections of

Can be engineered for custom job site application for temporary or

guarantees faster and easier access when installing wall ties

to be called to a specific floor hot dip galvanized steel permanent use

SAFETY FEATURES

INDUSTRIES SERVED Commercial: Construction, Demolition, Masonry, Restoration Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

• Upper, Lower and Intermediate Floor Stop switches integrated into system • Manual brake release lever in case of power interruption during use • Failsafe brake holds the load securely when not lifting or lowering loads • Removable overhead protection keep workers safe during load and unload • Sensors detect when basket is in load or unload mode and hoist will not operate • Fold down loading and unloading ramps with guard rails to ensure worker safety All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090910


MAX CLIMBER 2000PMB MAN & MATERIAL HOIST

H 500ft W 2000lbs

SPECIFICATIONS Set Up Lift Capacity

2000 lbs. Personnel: up to 7 passengers

Lift Speed

80 fpm

Maximum Anchored Height

500 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

93” x 95”

Mast Sections

102lbs per 5ft section

A/C Power

Standard Controller: 220v, 30amp, 3 Ф Optional Phase Converter: 220v, 60amp, 1 Ф

SYSTEM CONFIGURATION

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


The platform is equipped with loading & unloading ramps. Optional front loading ramps. All Beta Max Hoist Systems meet or exceed ANSI & OSHA specifications.


CONTACT INFORMATION

1895 Robert J Conlan Blvd NE Palm Bay, FL 32905 1-800-233-5112 HOURS OF OPERATIONS: Monday – Friday 8am – 5:30pm EST Sales: Ken Barrett Portable Hoists and Maxial Direct 321-956-9388 Cell 321-482-6612 kbarrett@BetaMaxHoist.com Parts:

Maya Burbano – mburbano@BetaMaxHoist.com

● Direct 321-727-3737 ● Fax 321-768-9517 www.BetaMaxHoist.com ● P.O. Box 2750 ● Melbourne, FL 32902-2750

Beta Max Sales & Product Guide for Print  

You can print or download this version. Contact Ken Barrett 321-482-6612 For a hard copy.

Read more
Read more
Similar to
Popular now
Just for you