Page 1


Beta Max Hoist, Inc.

Corporate Manufacturing Facility 1895 Robert J. Conlan Blvd NE Palm Bay, FL 32905 Phone: 800-233-5112 Fax: 321-768- 9517 www.betamaxhoist.com

Our Products are Built to Last! Leading Manufacturer of High Speed Material Hoist Systems for Confined Spaces including Scaffold Material Hoist, Portable Material & Personnel Hoists & Construction Site Material Hoist Elevators

INDUSTRIES WE SERVE

• Rental • Scaffolding • Masonry • Restoration • Construction • Stucco • Glazing • Demolition • Swing Staging • Curtain Wall • Industrial Boiler Maintenance • Cement Plants • Power Plants • Petro-Chemical Plants • Paper Mills • Storage Silos KEY FEATURES

• Distribution throughout the US, Canada and Central/South America • Consultation to Get you the Right Equipment • Full Service Manufacturer – Parts, Service and Tech Support • Safe and Efficient High Speed Material Delivery (80FPM) • Fits in Confined, Hard to Reach Spaces with Easy Installation • Complies with all ANSI and OSHA Regulations • Excellent Resale, Rental and Maintenance Revenue. In 1985, Beta Max Hoist, Inc. was established and introduced the first high-speed, long-lift, wire rope material hoist systems as an alternative solution for general construction material lifting. Headquartered in Melbourne, FL. The Company has been meeting increased demands for safe and affordable material and personnel hoists with payloads ranging from 200 to 6000lbs. The three product divisions include portable material hoists line, scaffold erection and dismantle Maxial track hoist and our full line of Max Climber personnel and material rack and pinion lifts. Beta Max continues to expand, update and create innovated products that provide customers with equipment and lifting solution that work safely and cost-effectively. Portable Hoists The Portable Material Hoist line currently has 7 high speed wire rope models that reach heights of 400ft with capacities up to 2000 lbs. including our popular Leo XXL (VFD) variable speed panel placing specialty hoist, multiple mounting systems to adapt to most job site applications and carrying accessories to accommodate a variety of job site lifting requirements. Designed for attaching to conventional walk-through frame and system scaffolding, Beta Max Hoists is the first choice for contractors that want reliability and simplicity. Our hoists hangs under the horizontal members of the scaffold and can

be used to lift material up through the belly of the scaffold or to be cantilevered over the side and rolled back and forth along the I-beam or monorail system for simple loading and unloading of material Maxial Scaffolding Hoist In 1990 we introduced the Maxial Scaffolding Hoist, designed primarily to facilitate scaffold erection and dismantle on commercial construction sites and industrial plant maintenance projects. Rack and Pinion Hoists Beta Max carries a family of lifts in the Max Climber line of rack and pinion material, personnel, transport platforms and industrial hoists. Combining our in-house products and world-wide connections, Beta Max rack and pinion hoists can provide a hoisting system designed specifically for your project. Beta Max Hoist is committed to providing superior quality products with exceptional service and technical support. It is the policy of the company to work and consult with our customers to create safe and reliable hoist systems that will increase productivity and worker safety. If you are able to win more bids and finish your projects faster your company is going to naturally increase the number completed projects per year. Beta Max products are a key component to making this happen.


NEW to Beta Max’s fleet, the Max Climber 4000/3000 Transport Platform has different configurations that enable you to carry up to 4000lbs in a 48”x89” basket and 3000lbs with extensions that enable the lift to reach a total length up to 13’ long. This new lift is perfect for contractors that need to get drywall, sheetrock, scaffolding and general construction equipment into a 48”x154” basket to the upper decks up to 450 feet high. BETA MAX OFFERS COMPLETE LINE OF HIGH SPEED PORTABLE HOISTS 7 Portable Hoist Models: •Scorpio XL 160ft - 400lbs •Gemini Plus 110v - 220ft 1200lbs •Gemini Plus 220v - 220ft 1200lbs •New Yorker 350ft – 600lbs •Leo 220/110ft - 1000/2000lbs •Leo XXL 400/200ft - 1000/2000lbs •Leo XXL VFD (Variable Speed Hoist) 400/200ft - 1000/2000lbs Mounting Options • I-Beam Trolley System • Scaff – Trac Monorail • Trestle Monorail • Vertical Post Mount

Rack and Pinion Material and Personnel, Transport Platform lift systems:

MC1000, MC1500, MC2000 MB, MC2000 PMB, MC2500 M, MC4000/3000 TP Beta Max offers a variety of Rack and Pinion hoists with many different load capacities and platform dimensions that can travel up to 500 feet. These lifts travel along a steel mast structure using a rack and pinion rather than the traditional wire rope system. The Max Climber series has many features such as small footprints to fit into confined spaces, fold down ramps to allow for loading and unloading without double or triple handling, installation efficiency ensured with self erecting features (NO crane required), can attach to scaffolding or anchor directly to the structure, floor stops, failsafe brake system, built for material only, personnel or transport platforms and many power options to choose from.

Maxial Scaffold Erection/Dismantle Hoist:

Accessories for Hoisting Jobsite Material

Beta Max Portable Material Hoist

• Durable, reliable and 80 FPM • Installs easily on existing scaffold systems, work platforms, mast climbers, IBeams, rooftops and works well with swing stage applications for faster material delivery. • Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level • Confined and hard to reach spaces made easy with a portable hoist • Maximum safety and efficient alternative to rope & pulley systems, cranes, and forklifts • Leo (VFD) Variable Speed Hoist provides a smooth controlled movement that is instrumental for precision placement of larger more delicate materials such as glass, curtain wall, cladding, solar panels, large stones and architectural panels. It is a safe, more productive, cost effective alternative to expensive tower and mini cranes, costly certified crane operator expenses and setup, breakdown and daily rental costs of traditional methods of placing panels. Comes equipped with 2 wireless handheld remotes enabling you to pick and place all in one run.

Hoist of choice for expedited Scaffold Erection & Dismantlement for over 20 years • Up to 20% more efficient use of man power, resulting in less worker exhaustion or risk of injury and greater productivity • Perfect jobsite partner for Industrial Boiler Maintenance - engineered to fit easily through boiler access ports for system scaffold E&D, Narrow Track System option available. • Multi-purpose hoist solution delivers materials to the job level after scaffold is in place • Durable lightweight design that is easy to transport and install with no tools required • Customized operational heights available • Long lasting performance with minimum maintenance required Equipment Availability We have distribution across the United States, Canada and Central/South America with hoists readily available.

Contact Your Local Regional Sales Rep Today at 1-800-233-5112 to rent or own.


Table of Contents Client Assessment Form - Page 3 – 4 PORTABLE HOIST LINE - Pages 5 – 8 Beta Max Hoist Systems - Pages 9 – 10 Double Rope Kit - Page 11 Scorpio XL Hoist (400LBS) - Pages 12 - 19 Gemini 110V & 220V Hoist (600-1200LBS) - Pages 20 – 29 New Yorker Hoist (600LBS) - Pages 30 – 31 Leo & Leo XXL Hoist (1000-2000LBS) - Pages 32 – 39 MOUNTING OPTIONS PORTABLE HOISTS Post Mount (Only for Scorpio XL) - Pages 40 – 41 Scaff-Trac (ALL HOISTS) - Pages 42 – 44 I-Beam Trolley/Fixed I-Beam (ALL HOISTS) - Pages 45 – 46 Trestle Monorail (ALL HOISTS) - Pages 47 – 50 ACCESSORIES (ALL HOISTS) - Pages 51 – 53 VARIABLE SPEED HOIST – PANEL PLACING Leo XXL VFD Variable Speed Hoist - Pages 54 – 72 Maxial Scaffold Erection & Dismantle Hoist - Pages 73 – 81 Rack and Pinion Lifts - Pages 82 – 91 Beta Max Web links and Contact Info - Pages 92 – 93


Client Assessment Form Portable Materials Hoist 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.

14. 15. 16. 17. 18. 19. 20. 21.

Hoist for Purchase or Rental? Rental Period?___________________

Is the project in a confined space? Yes or No How high do you need to lift? ______________________________________________________ How much weight do you need to lift?_______________________________________________ What are you lifting? ____________________________________________________________ What are you power requirements? ________________________________________________ Will you need to counter balance the weight of your load? Yes or No _____________________ Is the scaffold tied into the structure? Yes or No ______________________________________ Attaching hoist to scaffold, mast climber or roof top? __________________________________ Mount: Does the hoist need to be fixed, trolley or monorail?_____________________________ a. Ibeam? Monorail(ScaffTrac)? Vertical Post? Trestle Monorail? Do you need to cantilever outside of the scaffold? Yes or No, if Yes how far?________________ Will you be lifting the load in the middle of the scaffold? _______________________________ Are you picking up or placing glass, unitized curtain wall, cladding, solar panels, architectural panels, exterior finish systems (EFS), granite or marble stone? Yes or No __________________ Does the hoist need to have a variable speed setting that enables you to have a soft, controlled acceleration and deceleration to make lifting heavy, delicate materials easier and safer? Yes or No a. What are you lifting and placing? ____________________________________________ b. What are you originally planning on using to lift and place this material? ____________ ________________________________________________________________________ What type of portable hoist accessories will you need to bring materials up and down? ______________________________________________________________________________ Do you need to extend the pendant longer than the 6ft pendant provided with the hoist? _____________________________________________________________________________ What is your process of erecting and dismantling scaffold? (Maxial) ______________________ _____________________________________________________________________________ Have you been Awarded the project ____ or are you Bidding ___ on this project? When is the bid due _______? Is it a Public ___ or Private ___ Bid? Do you know how many may be bidding on this project? ____. Expected Project Start Date____________ Hoist needed by? ______________________

ADDITIONAL NOTES: _______________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ For additional help or any assistance at all with your Beta Max Portable Material Hoists, Maxial Scaffold Hoist or Commercial Project please contact: Ken Barrett, National Sales and Marketing at Beta Max Hoist: 321-482-6612 cell, 321-956-9388 or kbarrett@betamaxhoist.com www.BetaMaxHoist.com

TF 1-800-233-5112 – Ken Barrett Direct 321-956-9388


Rack and Pinion 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28.

Will you want to convey just material ____ or both man & material _______? Will you need to install in the interior ____ or exterior ____ of the structure? Is there a defined exterior footprint area ______or internal shaft way ______ size restriction? What will your maximum operational load / offload height be ________? What variety of Materials will you be lifting _______________________? How high Do you need to lift this material _______________________? Do you have a single item with a defined lifting weight requirement: _______? How many levels will you be servicing: ________? If conveying personnel how many Landing Gates: _______? Will you need to go the roof level? Yes ____ / No ____? If going to roof level is there Parapet Wall? Yes ____ / No ____ Height ____? Will you be anchoring to the main structure ____ or scaffolding ____? Will you be attaching to a new structure ____ or an existing structure____? Is the structure commercial / residential ____ or industrial / manufacturing ____? If attaching to the main structure is it standard floor slab ____ or industrial steel beam ____? If attaching to the main structure is there an exterior skin / veneer ____? If attaching to the main structure is the exterior skin / veneer removable ____? If needed can you drill through the veneer to get to the floor slab attachment point ____? Have you been Awarded the project ____ or are you Bidding ___ on this project? When is the bid due _______? Is it a Public ___ or Private ___ Bid? Do you know how many may be bidding on this project? ____. Expected Project Start Date____________ Hoist needed by? ______________________ Rental period: From _______ To _______? Expected number of month’s ____? Will you require a Tech Supervisor to assist with Install ____ or a full Turn Key ____ install? Will the Job Site be: Union ___ / Private ___ / Govmnt ___ / Military ___ / Open Shop ___ ? Do you have prior experience with installation ____ / operation ____ / removal of a R&P hoist? Will you need to move the hoist to different locations on the job site during the project? ____ ?

We provide you with: 1. Wall Ties to anchor to the structure within every 20ft. 2. Pull Out & Shear Forces that the structure you are attaching to will need to accommodate 3. Concrete support pad surface dims. 4. Downward Dynamic load forces the hoist will exerted on your installed concrete pad. ADDITIONAL NOTES: _______________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ For additional help or any assistance at all with your Beta Max Portable Material Hoists, Maxial Scaffold Hoist or Commercial Project please contact: Ken Barrett, National Sales and Marketing at Beta Max Hoist: 321-482-6612 cell, 321-956-9388 or kbarrett@betamaxhoist.com www.BetaMaxHoist.com

TF 1-800-233-5112 – Ken Barrett Direct 321-956-9388


5


6


Beta Max Hoist Systems I-Beam Trolley

I-Beam Suspension Bracket is 1 complete with 1 Saddle – Normally 2 or more per system

I-Beam Hoist System

Roller Top is needed for Scaff-Trac

Scaff-Trac Hoist System Counterweights

9

Scaff-Trac is complete with 2 Saddles

Double Rope Kit includes Shackle


Beta Max I-Beam Trolley

I-Beam Trolley Adjusts 2.66” – 6” Flange

Anti-Twist bar with rollers is included with every I-Beam Trolley Top To attach the anti twist roller accessory. Remove the hoist from the I beam. Remove two top bolts, the center bolt and the one closest to the front of the drum. Using included longer bolts, attach roller top as shown in attached photos. Re mount the hoist to the I beam. Adjust the height of the rollers so that they contact the bottom side of the I beam and tighten the mounting bolts.

10


Beta Max Double Roping Hoist

Swivel Jaw Eye Shackle attaches here and comes with the double roping kit.

Cable Weight

Nico Press

Remove hook from shackle when double roping

Double Rope

11


SCORPIO PLUS XL Plus XL: 50-33-1

H 160ft W 400lbs

HOIST FEATURES •

Perfect for light weight, smaller projects

Very mobile on a jobsite due to super light

in confined spaces 95lb weight

Confined and hard to reach spaces made easy

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Vertical Post Mounting System easily attaches to the leg of scaffolding and pivots 180°, allowing convenient loading and unloading of materials at any work level

Maximum safety and efficient alternative to rope & pulley systems, cranes,

Installs easily on existing scaffold systems, work platforms, I-Beams, and rooftop

with a portable hoist

and forklifts

mounting options

INDUSTRIES SERVED SAFETY FEATURES

12

• Scaffolding • Masonry • Restoration • Construction • Stucco

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


SCORPIO PLUS XL Plus XL: 50-33-1

H 160ft W 400lbs

SPECIFICATIONS Set Up

Single Line

Lift Capacity

400 lbs

Lift Speed

80 fpm

Scorpio Plus XL Lift Height

160’

A/C Power

110v, 1Φ, 1HP

Horsepower

1 HP

Mounting Options

I-Beam Trolley, Mac-Trac, Scaff-Trac, Trestle Monorail, Vertical Post

MOUNTING OPTIONS

I-BEAM TROLLEY

MAC-TRAC

SCAFF-TRAC

TRESTLE MONORAIL

VERTICAL POST

ACCESSORIES

13

• Brick Fork • Block Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer • Scaffold Frame Fork 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


PART NO.

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

AC POWER (PHASE)

MOTOR HP

WEIGHT

50-33-1

SCORPIO XL

400

160

80

110 V 1 PHASE

1 HP

90

PART NO. 60-53 60-1

DESCRIPTION REINFORCED POST MOUNT COUNTERWEIGHT CLAMP SET

SPECIFICATIONS SCORPIO XL

12

w/swivel clamps for use on round 2”

60

50-33-1

60-53

14

60-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included CANNOT BE DOUBLE ROPED

WEIGHT

Beta Max Post Mount Hoist Mounting System


DIMENSION – SCORPIO PLUS XL POST MOUNT 15


BetaMax PART NO.

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

AC POWER (PHASE)

MOTOR HP

WEIGHT

50-33-1

SCORPIO XL

400

160

80

110 V 1 PHASE

1 HP

90

BetaMax PART NO.

20-43-2 60-41 60-1

50-33-1

DESCRIPTION ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) COUNTERWEIGHT CLAMP SET

SPECIFICATIONS Use w/Scorpio Only

10

use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

150

Includes 2 Saddles

20-43-2

16

60-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame and I-Beam NOT Included. No Double Rope Kit Available

WEIGHT

Beta Max Scaff-Trac Hoist Mounting System

60


20-43-2

17

ROLLER TOP Scorpio XL only


BetaMax PART NO.

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

AC POWER (PHASE)

MOTOR HP

WEIGHT

50-33-1

SCORPIO XL

400

160

80

110 V 1 PHASE

1 HP

90

BetaMax PART NO.

20-44-1 60-40 60-1

50-33-1

DESCRIPTION I-BEAM TROLLEY TOP (Fits flange of 2.66 – 5.25) I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

SPECIFICATIONS Use w/Scorpio XL Only

38

use w/ALL HOISTS

29

w/swivel clamps for use on round 2”

60

20-44-1

60-40

18

60-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame and I-Beam NOT Included. No Double Rope Kit Available

WEIGHT

Beta Max I-Beam Trolley Hoist Mounting System


20-44-1

19

I-BEAM TROLLEY TOP (Fits flange of 2.66 – 5.25)

Use w/Scorpio XL Only

DIMENSION – SCORPIO PLUS XL MOUNTED ON I-BEAM


GEMINI PLUS 110V: 50-11 | 220V: 50-8

H 220/110ft W 600/1200lbs

HOIST FEATURES •

Hoist of choice for medium duty projects

Largest 120v Beta Max Hoist on the market

Installs easily on existing scaffold systems,

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Flexible I-Beam Mounting Option works with

Confined and hard to reach spaces made easy with a portable hoist

Maximum safety and efficient alternative to rope & pulley systems, cranes,

work platforms, I-Beams, and rooftop mounting options

and configures to each unique jobsite

and forklifts

Long lasting performance with minimum maintenance required

SAFETY FEATURES

20

INDUSTRIES SERVED • Scaffolding • Restoration • Stucco

• Masonry • Construction • Demolition

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


GEMINI PLUS 110V: 50-11 | 220V: 50-8

H 220/100ft W 600/1200lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

600 lbs

1200 lbs

Lift Speed

80 fpm

40 fpm

Lift Height

220’

110’

A/C Power

110v, 1Φ or 220v, 12 Amp, 1Φ

Horsepower

1.5HP

Mounting Options

Fixed I-Beam, I-Beam Trolley, Scaff Trac, Trestle Monorail

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES

21

• Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


BETA MAX PART NO.

MODEL

50-11

GEMINI PLUS 110V GEMINI PLUS 220V

50-8 BETA MAX PART NO.

60-21

50-11 or 50-8

60-40 60-1

LIFT CAP. (LBS.) 600 1200* 600 1200*

LIFT HT. (FT.) 220 110* 220 110*

DESCRIPTION

SPEED (FPM) 80 40* 80 40*

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE

MOTOR HP

WEIGHT

1.5 HP

174

1.5 HP

176

SPECIFICATIONS

I-BEAM TROLLEY TOP w/ lower wheel assembly I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

use with GEMINI/NEW YORKER/LEO use w/ALL HOISTS

29

w/swivel clamps for use on round 2”

60

60-21

60-40 70-9

22

60-1

SHIPPING WEIGHT 50

Every Beta Max Hoist comes with wire rope Pendant Control Standard Everyand Beta6FT Max Hoist comes with wire NOTE: Scaffold Frame NOT Included rope and 6FT Pendant Control Standard *NOTE: Requires Double Rope KitIncluded (BM Part # 70-9)Beta Max I-Beam Trolley Scaffold Frame NOT

Hoist Mounting System


60-21

I-BEAM TROLLEY TOP w/ lower wheel assembly

DIMENSION – GEMINI 110V/220V TROLLEY TOP MOUNTED ON I-BEAM 23


60-8

FIXED I-BEAM BRACKET (flange width 2.66 to 4.25)

DIMENSION – GEMINI 110V/220V FIXED MOUNTED ON I-BEAM 24


BETA MAX PART NO. 50-11 50-8

GEMINI PLUS 110V GEMINI PLUS 220V

LIFT CAP. (LBS.) 600 1200* 600 1200*

LIFT HT. (FT.) 220 110* 220 110*

BETA MAX PART NO.

DESCRIPTION

50-7

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) COUNTERWEIGHT CLAMP SET

60-41 60-1

50-11 or 50-8

MODEL

SPEED (FPM) 80 40* 80 40*

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE

MOTOR HP

WEIGHT

1.5 HP

174

1.5 HP

176

SPECIFICATIONS use with GEMINI/NEW YORKER/LEO use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

60-41

50-7

70-9

25

60-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-9)

Beta Max Scaff-Trac Hoist Mounting System

SHIPPING WEIGHT 18 150 60


50-7

ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON SCAFF_TRAC 26


BETA MAX PART NO. 50-11 50-8

MODEL GEMINI PLUS 110V GEMINI PLUS 220V

60-41

50-11 or 50-8

60-33

60-29

LIFT HT. (FT.) 220 110* 220 110*

DESCRIPTION

BETA MAX PART NO.

50-7

LIFT CAP. (LBS.) 600 1200* 600 1200*

80 40* 80 40*

AC POWER (PHASE) 110 V 1 PHASE 220 V 1 PHASE

MOTOR HP

WEIGHT

1.5 HP

174

1.5 HP

176

SPECIFICATIONS

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) TRESTLE/MONORAIL KIT

add to 60-41 to make complete Trestle/Monorail for 1200 lbs. capacity

SPEED (FPM)

COUNTERWEIGHT CLAMP SET

use with GEMINI/NEW YORKER/LEO use w/ALL HOISTS – Fits 7ft and 8ft scaffolding use w/NEW VERSION SCAFF-TRAC

180

w/square clamps for use on square 2.5”

66

60-41

50-7 60-33

70-9

27

60-29

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-9)

SHIPPING WEIGHT 18

Beta Max Trestle Monorail Hoist Mounting System

150


50-7

28

ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON TRESTLE


50-7

29

ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – GEMINI 110V/220V ROLLER TOP MOUNTED ON TRESTLE


NEW YORKER 50-18

H 350ft W 600lbs

HOIST FEATURES •

Perfect for high reach, medium duty projects

Long lasting performance with

minimum maintenance required

Confined and hard to reach spaces made easy

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

Maximum safety and efficient alternative to rope & pulley systems, cranes, and forklifts

Installs easily on existing scaffold systems, work platforms, I-Beams, and rooftop

Flexible I-Beam Mounting Option works with and configures to each to each

with a portable hoist

mounting options

unique jobsite SAFETY FEATURES

30

INDUSTRIES SERVED • Scaffolding • Restoration • Stucco

• Masonry • Construction • Demolition

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


NEW YORKER 50-18

H 350ft W 600lbs

SPECIFICATIONS Set Up

Single Line

Lift Capacity

600 lbs

Lift Speed

80 fpm

Lift Height

350’

A/C Power

220v, 1Φ, 1.5HP

Horsepower

1.5HP

Mounting Options

Fixed I-Beam, I-Beam Trolley, Scaff-Trac, Trestle Monorail, Mac-Trac

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES • Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer

31 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


LEO/LEO XXL Leo 1 Phase: 50-40 | Leo XXL: 50-25

H 220/110ft H 400/200ft W 1000/2000lbs

HOIST FEATURES •

Hoist of choice for heavy-duty, high lift projects

Long lasting performance with minimum

maintenance required

Confined and hard to reach spaces made easy with a portable hoist

Maximum safety and efficient alternative to rope & pulley systems, cranes, and forklifts

Installs easily on existing scaffold

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

systems, work platforms, I-Beams, and rooftop mounting options

Flexible I-Beam Mounting Option works with and configures to each unique INDUSTRIES SERVED jobsite •

SAFETY FEATURES

32

• • • •

Scaffolding Masonry Stucco Glazing

• Demolition • Restoration • Construction

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


LEO/LEO XXL Leo 1 Phase: 50-40 | Leo XXL: 50-25

H 220/110ft H 400/200ft W 1000/2000lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

1,000 lbs

2,000 lbs

Lift Speed

80 fpm

40 fpm

LEO Lift Height

220’

110’

LEO XXL Lift Height

400’

200’

A/C Power

Leo 220v, 1Φ or Leo XXL 220v, 3Φ *Cannot be field converted

Horsepower

1 Phase: 2HP, 3 Phase: 3.3HP

Mounting Options

Scaff Trac, Trestle Monorail, I-Beam Trolley, Fixed I-Beam

MOUNTING OPTIONS

FIXED I-BEAM

I-BEAM TROLLEY

SCAFF-TRAC

TRESTLE MONORAIL

ACCESSORIES

33

• Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


BETA MAX PART NO.

50-40

LEO

50-25

LEO XXL

BETA MAX PART NO.

50-40 or 50-25

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

AC POWER (PHASE)

MOTOR HP

WEIGHT

1000 2000* 1000 2000*

220 110* 400 200*

80 40* 80 40*

220 V 1 PHASE 220 V 3 PHASE

2 HP

200

3.3 HP

210

DESCRIPTION

SPECIFICATIONS

60-21

I-BEAM TROLLEY TOP w/ lower wheel assembly

use with GEMINI/NEW YORKER/LEO

50

60-40

I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

use w/ALL HOISTS

29

w/swivel clamps for use on round 2”

60

60-1

60-21

60-40

70-2

34

60-1

WEIGHT

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit Beta Max I-Beam Trolley (BM Part # 70-2) Hoist Mounting System


60-21

I-BEAM TROLLEY TOP w/ lower wheel assembly

DIMENSION – LEO 220V/3PH TROLLEY TOP MOUNTED ON I-BEAM 35


BETA MAX PART NO.

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

AC POWER (PHASE)

MOTOR HP

WEIGHT

220 V 1 PHASE 220 V 3 PHASE

2 HP

200

3.3 HP

210

50-40

LEO

1000

220

80

50-25

LEO XXL

1000

400

80

BETA MAX PART NO.

50-7 60-41 60-1

DESCRIPTION

SPECIFICATIONS

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP)

COUNTERWEIGHT CLAMP SET

use with GEMINI/NEW YORKER/LEO use w/ALL HOISTS – Fits 7ft and 8ft scaffolding w/swivel clamps for use on round 2”

50-40 or 50-25 60-41

Includes 2 Saddles

50-7

SCAFF-TRAC SINGLE LINE CAPACITY ONLY WITH LEO HOIST

36

60-1

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included.

Beta Max Scaff-Trac Hoist Mounting System

SHIPPING WEIGHT 18 150 60


50-7

37

ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – LEO 220V/3PH ROLLER TOP MOUNTED ON SCAFF_TRAC


BETA MAX PART NO.

50-40 50-25 PART NO. 50-7 60-41 60-33

50-40 or 50-25

60-23

60-41

60-29

MODEL

LIFT CAP. (LBS.)

LIFT HT. (FT.)

1000 2000* LEO XXL 1000 2000* DESCRIPTION

220 110* 400 200*

LEO

ROLLER TOP (use w/Scaff-Trac or Trestle) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) TRESTLE/MONORAIL KIT

add to 60-41 to make complete Trestle/Monorail for 1200 lbs. capacity

TRESTLE/MONORAIL SUPPORT BRACKET

SPEED (FPM)

AC POWER (PHASE)

80 220 V 40* 1 PHASE 80 220 V 40* 3 PHASE SPECIFICATIONS

MOTOR HP

WEIGHT

2 HP

200

3.3 HP

210

use with GEMINI/NEW YORKER/LEO use w/ALL HOISTS – Fits 7ft and 8ft scaffolding use w/NEW VERSION SCAFF-TRAC

COUNTERWEIGHT CLAMP SET

w/square clamps for use on square 2.5”

50-7

* 70-2

60-29

180

EXTRA SUPPORT BRACKET TO COMPLETE 2000 LB. CAP. TRESTLE/MONORAIL

60-23

38

150

32

add to 60-33 & 60-41 to make complete Trestle/Monorail for 2000 lbs. capacity-required for maximum capacity

Every Beta Max Hoist comes with wire rope and 6FT Pendant Control Standard NOTE: Scaffold Frame NOT Included. * Requires Double Rope Kit (BM Part # 70-2)

SHIPPING WEIGHT 18

Beta Max Trestle Monorail Hoist Mounting System

66


50-7

ROLLER TOP (use w/Scaff-Trac or Trestle)

DIMENSION – LEO 220V/3PH ROLLER TOP MOUNTED ON TRESTLE MONORAIL 39


40


41


42


43


44


I-BEAM: TROLLEY & FIXED Capacity: 2000lbs

FEATURES FIXED I-BEAM •

Fixed I-Beam option firmly holds the hoist stationery. Perfect for moving materials in confined spaces like the interior of scaffolding or an elevator shaft.

Fixed I-Beam Top is compatible with I-Beams with a flange width of 2.66’-5.25’

I-BEAM TROLLEY

Material delivery made easy with I-Beam

Customize forward and backward cantilever to your unique job site requirements

Adjustable Flange Widths of 2.66’-5.25’ allows Trolley to attach to standard I-Beams allowing for easy installation on any jobsite

Perfect for heavy duty projects

Suspension Brackets allow you to install your own I-Beam to existing

Suspension Brackets allow you to install your own I-Beam for easy accessibility anywhere on the jobsite that has scaffolding

Counterweight Clamp Assembly helps balance overall weight distribution,

All Beta Max Mounting Systems can be tailored to your jobsite specifications

Trolley that moves along the full length of the beam

• • • • •

I-BEAM TROLLEY: 20-44-1 | 60-21

scaffolding anywhere on the jobsite

installs easily and accommodates your weights

COMPONENT LIST

45

FIXED I-BEAM: 60-8

Suspension Brackets: 60-40 Fixed Top: 60-8 Trolley Top: 60-21 Counter Weight Clamp Assy. 60-1

Scorpio Trolley: 20-44-1

COMPATIBLE HOISTS • • • •

Scorpio Plus & Scorpio Plus XL Gemini Plus New Yorker Leo & Leo XXL

Scaffolding frames should always be securely assembled and counter-balanced appropriately. Beta Max is not responsible for providing I-Beams or counterweights for the Counterweight Clamp Assembly. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoist systems.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

101510


I-BEAM: TROLLEY & FIXED Capacity: 2000lbs

SUSPENSION BRACKET

COUNTERWEIGHT CLAMP ASSEMBLY

I-BEAM TROLLEY Part Number: I-Beam Trolley: 20-44-1 (Scorpio Plus) I-Beam Trolley: 60-21 (Gemini, New Yorker, Leo & Leo XXL)

SUSPENSION BRACKET

COUNTERWEIGHT CLAMP ASSEMBLY

46

I-BEAM FIXED Part Number: 60-8 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


47


48


49


50


51


Pallet Lifter

1500 lb. Capacity

Telecrane Wireless Remote System for all Portable Hoist Models

52

110v 1PH, 220v 1PH, 220v 3PH


LEO XXL VFD Leo XXL wired: 50-58 | Leo XXL wireless: 50-58A

H 400/200ft W 1000/2000lbs

HOIST FEATURES •

Hoist of choice for glazing, masonry,

Ideal for precision placement of

demolition, construction and restoration companies delicate materials

Confined and hard to reach spaces made

Variable Frequency Drive allows for

Second operating speed graduates

VFD allows Three Phase motor to operate on

Control your work flow, schedule and budget with the most efficient and safe material delivery to any work level

Optional Scaff-Trac Mounting System provides a standardized and complete lifting solution engineered for easy installation every time

Flexible I-Beam Mounting Option works with and configures to each to each

easy with a portable hoist

smooth acceleration and deceleration of hoist at approximately 10 ft/sec

at approximately 80 feet per minute

Single Phase power

unique jobsite SAFETY FEATURES

54

INDUSTRIES SERVED • • • •

Scaffolding Masonry Stucco Glazing

• Demolition • Restoration • Construction

• • •

Water Tight Connectors Easy Cable Replacement (Beta Max provides clamps and crimp) Failsafe brake holds the load securely when not lifting or lowering- loads are powered up and down,

• • •

no free-falling or slipping Non-rotating cable helps keep loads from spinning Upper-limit Switch Assembly stops the hoist instantly when activated Sturdy Electrical Controller equipped with thermal overload sensing device

All high speed wire rope hoists are ANSI & OSHA compliant under the code of ASME B30.16. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

052912


LEO XXL VFD Leo XXL wired: 50-58 | Leo XXL wireless: 50-58A

H 400/200ft W 1000/2000lbs

SPECIFICATIONS Set Up

Single Line

Double Line

Lift Capacity

1,000 lbs

2,000 lbs

Lift Speed

80 fpm

40 fpm

LEO XXL Lift Height

400’

200’

A/C Power

220v-13amp

220v-13amp

Horsepower

3 Phase: 3.3HP

Mounting Options

Scaff Trac, Trestle Monorail, I-Beam Trolley, Fixed I-Beam

MOUNTING OPTIONS

SCAFF-TRAC

TRESTLE MONORAIL

FIXED I-BEAM

I-BEAM TROLLEY

ACCESSORIES

55

• Brick Fork • Block Fork • Scaffold Frame Fork • Equipment Basket • Dumpster Bucket • Spreader Bar • Mud Tub • Double Rope Kit • Counterweight Clamp Assembly • Remote Control Extension • Power Cord Extension • Wireless Dual Control Package • Booster Transformer 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


BETA MAX PART NO.

MODEL

50-58

LEO XXL VFD WIRED (50-20-2) LEO XXL VFD WIRELESS (50-20-3)

50-58A

BETA MAX PART NO.

50-58 or 50-58A

LIFT CAP. (LBS.)

LIFT HT. (FT.)

SPEED (FPM)

1000 2000*

400 200*

Variable Speed

1000 2000*

400 200*

Variable Speed

DESCRIPTION

AC POWER (PHASE)

220 V 1 or 3 PHASE 220 V 1 or 3 PHASE

MOTOR HP

3.3 HP

280

3.3 HP

280

SPECIFICATIONS

I-BEAM TROLLEY TOP w/ lower wheel assembly

use with GEMINI/NEW YORKER/LEO

50

60-40

I-BEAM SUSPENSION BRACKETS (EACH) COUNTERWEIGHT CLAMP SET

use w/ALL HOISTS

29

w/swivel clamps for use on round 2”

60

60-21

60-40

* 70-9

56

60-1

WEIGHT

60-21

60-1

800-233-5112

WEIGHT

Every Beta Max VFD Hoist comes with wire rope and 20FT Pendant Control Standard. NOTE: Scaffold www.BetaMaxHoist.com Beta Max I-Beam Trolley Frame NOT Included. Hoist Mounting System * Capacity with Double Rope Kit


BETA MAX HOIST

PANEL PLACING, GLAZING AND CURTAIN WALL SOLUTIONS

FEATURING

800-233-5112

57

www.BetaMaxHoist.com


Beta Max Leo 2000lb Hoist Variable Speed Hoist Leo XXL Variable Speed Hoist

Beta Max Inc., a leading provider of affordable material lifting solutions, offers its Leo Series of electric high speed wire rope portable hoists. The Leo Series, which includes the Leo XXL, is designed in compliance with current safety regulations and comes equipped with numerous features that ensure optimum safety and maximum control when lifting materials in the construction and glazing industries. Beta Max’s specialty hoist, the Leo XXL VFDSeries, features an integrated Variable Frequency Drive Controller (VFD) which provides a smooth controlled acceleration and deceleration that is instrumental for precision placement of larger more delicate materials such as glass, unitized curtain wall, cladding, solar panels, marble, granite, large stones, architectural panels and exterior finish system (EFS). It has all the capabilities of the Leo XXL hoist but has a variable speed controller and two wireless handheld remotes enabling you to pick and place all in one run. The Leo XXL VFD hoist system also enables you to have multiple rigging options that is less expensive than traditional methods and it’s more productive by installing more panels in less time. All Leo hoists are equipped with a push button pendant and upper limit switch assembly, enabling secure and easy up and down movement that instantly stops when the upper limit switch is activated. The heavy-duty Leo XXL can accommodate a maximum payload of 2000 pounds and can travel up to 400 feet. The hoist features fail-safe conical brakes to hold the load securely when the hoist is not actively transporting material. All Beta Max Hoists Systems meet or exceed ANSI and OSHA specifications.

800-233-5112

58

www.BetaMaxHoist.com


LIFTING SOLUTIONS Beta Max’s lifting solution is a Portable Electric High Speed Wire Rope hoist that is a cost effective alternative to traditional glazing methods. It is commonly used for installations of glass, unitized curtain wall, cladding, solar panels, architectural panel and exterior finish system (EFS) installation projects. This state of the art hoist is equipped with a Variable Frequency Drive (VFD) controller that offers multiple lift speed settings to 80 FPM for extreme control. This VFD system provides a smooth acceleration and deceleration feature that is key for precision placement of large, delicate or awkward materials. With a variety of different mounting options you become more productive by placing more panels with a pick and place solution. The hoist runs on in to 220v Single Phase power. So jobsite power is not an obstacle. 800-233-5112

59

www.BetaMaxHoist.com


Leo Variable Speed Hoist The Beta Max Leo XXLHoist is our largest capacity portable hoist designed for heavy duty long lifts. Two programmed speed sets are standard but, additional speed setting are available. The standard slow speed is 8 ft. per minute, for toggling materials into place and precision placement. The second set will smoothly graduate up to 80ft. per minute, for quicker movement between floors. The hoist is available with an extra long drum that allows for 400ft. of operational lifting height.

LEO VFD

Single Line

Double Line

Payload

1000lbs

2000lbs

Height XXL

400'

200'

Speed

80fpm

40fpm

Power

800-233-5112

60

220V, 3Ф OR 220V, 1Ф

When the hoist is used on a single line it has a 1000lb. capacity. The double rope kit that when installed, increases the hoists lifting capacity to 2000lbs. Wireless Controllers

Two hand held wireless controllers compliment this powerful tool by creating wireless freedom from long cumbersome pendant cords. This allows the worker waiting to receive/ place the panel to have control of the hoist and the payload.

www.BetaMaxHoist.com


Case Study 2 Portable Hoist Leo XXL Variable Speed Hoist 1. 2. 3.

Contractor Name: Benson Industries LLC Contractor type of work: Commercial Curtain Wall How did the use of Beta Max equipment help address and solve the clients special challenges? a. Budget: Did they save money, if so how much or what percentage? Finding “WeCustomers stayed within budget on the first job but now that they are paid for, its money on the bank.” b. Schedule: Did they improve on or simply meet their timeline? Max Leo XXL VFD’s help pay for themselves by the speed the hoist carries the payload. They move 50% Wire “The RopeBeta Hoists faster than the winches that we normally use. We increased production by at least 30% and finished the project ahead of schedule. This allowed us to send the hoists to start other projects which exceeded our customers expectations. As a result of using Beta Max Products we saved time and money” Mounting Options c. Size of available equipment: “We needed a high speed material hoist that could lift 2000lbs up to 200ft with variable speed functionality and offered Maxial Hoist a variety of mounting options. Beta Max worked closely with us to come up with a solution and provided a lifting system for us on time.” Dealer ROI d. Lifting load capacities: “We needed 1400lb to 2000lb load capacity, long travel capability (200ft) and 220V single phase power input.” e. Footprint / access challenges: Service “This Beta Max hoist was able to fit in a confined space and was mounted parallel to the building on an I-Beam system that took the hoist from corner to corner of the building. This enabled the hoists to trolley back and forth on each side of the building picking and placing window panels and curtain wall all day long.” “The Beta Max Hoist took care of all these needs.” 4. Customers level of satisfaction of Beta Max meeting the challenge: “We were very satisfied with the level of quality of the product. Our experience with Beta Max was great from the sale to customer service to helpful tips and answered questions from technical service.”


Glass Installation on the Job Site

800-233-5112

61

www.BetaMaxHoist.com


Glass Installation on the Job Site

800-233-5112

62

www.BetaMaxHoist.com


Simple and Cost Effective

Easy to install and use.

Install curtainwall up to 20% faster

Precision Placement leads to fast and efficient installation. Hoist simply mounts an I-Beam

800-233-5112

63

Alternative to cranes, forklifts, and rope & pulley systems

www.BetaMaxHoist.com


Productive and Efficient Glazing

Go from installing 5 - 8 panels a day to 17 - 22!

Curtain Wall

Place more panels in less time.

Precision Placement of weights of 200lbs to 2000lbs! For Installation, Restoration, Refurbishing and Replacement Cladding

Architectural Panels - Solar Panels - Exterior Finish Systems (EFS) - Marble - Large Stone - Granite Unitized Curtain Wall - Cladding

SAVE TIME AND MONEY • Lower your costs and win more projects by offering safe, cost effective alternative to conventional methods of removing and placing panels. • In many cases, for the cost of rent, setup and break down of only one crane you can own multiple Beta Max hoists.

800-233-5112

64

www.BetaMaxHoist.com


Get the most out of your investment! How your hoist is mounted can make all the difference when installing or replacing panels. When erecting scaffolding on a roof, adding additional IBeams running perpendicular as well as parallel to the building gives you full access to run the hoist along the full side of the building. We offer rigging solutions that save you time and money. No re-rigging. Reduce time or eliminate moving counter balance weights. Move more materials across several scaffold bays with ease and more efficient use of man power. Stop waiting on slow chain hoist or wasting money on expensive cranes and let Beta Max help you lower costs, win more bids and get your payload to the work level on time and within budget! 800-233-5112

65

www.BetaMaxHoist.com


Variety of Rigging Options Ability to have 7’ and 8’ cantilever with a Rolling Roof Rig.

Attach to mast climbers for getting material up and down quicker and more efficiently.

800-233-5112

www.BetaMaxHoist.com


Variety of Rigging Options

Make long runs and cantilever out to desirable lengths.

800-233-5112

67

Rigging on casters for the top of buildings on between floors for ease of movement, no rerigging.

www.BetaMaxHoist.com


More Rigging Options

Stand alone system on frame scaffold to cantilever over the side of the building, perpendicular to where you are installing your row of panels. You can also insert casters to make these systems moveable, as long you are within weight limits.

I Beam mounted parallel to the building (short run). Cantilever over the side of the building where you are installing a section of panels.

PLEASE NOTE: ALL BETA MAX SYSTEMS ARE STAND ALONE SYSTEMS. ALL LIFTING SYSTEMS

68

MUST BE ENGINEERED TO COMPLY WITH SAFETY AND BUILDING CODE REGULATIONS.


Safety Features • • • •

800-233-5112

69

Up limit switch stops the hoist instantly when load reaches the top. Non-rotating wire rope keeps the loads from spinning. Failsafe brake, all loads are powered up and down, no free-falling even in the event of a power loss. Rugged & dependable electrical controller with overload sensing device to protect your hoist from damage. Twist lock power connections prevent the power cords from being accidentally kicked or knocked loose.

www.BetaMaxHoist.com


Beta Max Hoist in the News

800-233-5112

71

www.BetaMaxHoist.com


World Trade Center Tower 4 and 1 Project

800-233-5112

72

www.BetaMaxHoist.com


Leo VFD Variable Speed Hoist Setup Instructions

1.

Handheld Wireless Remotes 6 Buttons have a function:

2. 4. 5. 3.

1. ON /START (Green) – Press once to turn the wireless remote ON, Press the second time to enable the controls of the remote 2. Green lights indicates connection with receiver 3. OFF/STOP (Red) – Emergency Stop for remote and turns remote OFF 4. Down - Top button operates hoist down in low speed - Bottom button operates hoist down in high speed 5. UP - Top button operates hoist up in low speed - Bottom button operates hoist up in high speed

Handheld Fixed Wired Pendant (MUST be connected at all times for both the wired and wireless pendants to control the hoist) Handheld Wireless Remotes 4 Buttons have a function: 5 Buttons have a function: 1. Red – Emergency E-Stop for both handhelds 1. 2.Red – Emergency E-Stop for both fixed Pendant Green – ON/OFF and wireless handhelds. 3. Start – Enables the remote that is in your hand 2. 4.UPUP – Hoist to move in UP Direction st position operates hoist UP in low speed 5.- 1Down - Hoist to move in DOWN Direction - 2nd position operates hoist UP in high speed 3. Down - 1st position operates hoist DOWN in low speed - 2nd position operates hoist DOWN in high speed 4. Start – enable the controls of the remote

1. 2. 3. 4.


Leo VFD Variable Speed Hoist Setup Instructions 

In order for wireless handheld to operate (this turns the hoist on): (The wireless remote must be ON with a green light and wired pendant Stop button must be in release mode for the unit to turn on.) 1. Wireless remote must be ON with a green light (Press the ON/START button) 2. Red button on wired remote must be in the release mode on wired remote. (Twist red knob and it will pop up – Release Mode) 3. Press start button on the wireless handheld to turn the unit on. The red light in the wireless receiver in the control box will turn on. 4. Now you can push the UP/DOWN to operate hoist.

In order for fixed handheld pendant to operate (this turns the hoist on): 1. 2. 3.

Red button must be in release mode Press start button to engage fixed handheld pendant Now you can push the UP/DOWN to operate hoist

Using both wireless remotes One wireless remote must be turned OFF before the second wireless remote can take control of the unit (The fixed handheld pendant must still be connected to the unit to operate)

NOTE: The Leo VFD hoist system is designed to be controlled by the wired fixed handheld pendant and one wireless handheld remote. This is designed for safety reasons. The operator of either remote must push the start button to engage that remote and take control of the hoist. The second wireless handheld remote is an extra backup remote in the case that something happens to the other wireless remote. You must have a wireless hand held remote to turn on the wireless system and operate the hoist.


PORTABLE HOIST PRICE LIST EFFECTIVE

May 14, 2012

1-800-233-5112

PORTABLE HOISTS T

PART NO.

MODEL

50-33-1

SCORPIO XL

50-11

50-40

GEMINI PLUS GEMINI PLUS NEW YORKER LEO

50-25

LEO XXL

50-58

LEO XXL VFD WIRED (50-20-2) LEO XXL VFD WIRELESS (50-20-3)

50-8 50-18

50-58A

T

LIFT CAP. (LBS.) 400

LIFT HT. (FT.) 160

SPEED (FPM) 80

600 1200* 600 1200* 600

220 110* 220 110* 350

80 40* 80 40* 80

1000 2000* 1000 2000* 1000 2000* 1000 2000*

220 110* 400 200* 400 200* 400 200*

80 40* 80 40* Variable

MOTO R HP 1 HP

102

$2,995.00

1.5 HP

174

$3,995.00

1.5 HP

176

$3,995.00

1.5 HP

164

$4,525.00

2 HP

200

$5,249.00

3.3 HP

210

$5,595.00

3.3 HP

280

$10,050.00

3.3 HP

280

$12,550.00

LIST PRICE

use with GEMINI/NEW YORKER/LEO

SHIPPING WEIGHT 50

$980.00

use with GEMINI/NEW YORKER/LEO

21

$275.00

use with GEMINI/NEW YORKER/LEO

18

$325.00

Use w/Scorpio XL Only

10

$198.00

Use w/Scorpio XL Only

38

$780.00

Variable

AC POWER (PHASE) 110 V 1 PHASE 110 V 1 PHASE 220 V 1 PHASE 220 V 1 PHASE 220 V 1 PHASE 220 V 3 PHASE 220 V 1 or 3 PHASE 220 V 1 or 3 PHASE

SHIPPING WEIGHT

LIST PRICE

*DOUBLE ROPE CAPACITY

HOIST TOP MOUNTING OPTIONS PART NO. 60-21 60-8 50-7 20-43-2 20-44-1

DESCRIPTION

SPECIFICATIONS

I-BEAM TROLLEY TOP w/ lower wheel assembly FIXED I-BEAM BRACKET (flange width 2.66 to 4.25) ROLLER TOP (use w/Scaff-Trac or Trestle) ROLLER TOP (use w/Scaff-Trac or Trestle) I-BEAM TROLLEY TOP (Fits flange of 2.66 – 5.25)

SCAFFOLD & VERTICAL POST MOUNT SYSTEMS PART NO. 60-53

DESCRIPTION

SPECIFICATIONS

REINFORCED POST MOUNT

SCORPIO XL

SHIPPING WEIGHT 12

LIST PRICE $250.00

COUNTERBALANCE OPTIONS PART NO. 60-1 60-29

DESCRIPTION COUNTERWEIGHT CLAMP SET COUNTERWEIGHT CLAMP SET

SPECIFICATIONS w/swivel clamps for use on round 2” w/square clamps for use on square 2.5”

SHIPPING WEIGHT 60 66

LIST PRICE $345.00 $345.00


PORTABLE HOIST PRICE LIST EFFECTIVE

1-800-233-5112 SCAFF-TRAC/TRESTLE-MONORAIL SYSTEMS PART NO. 60-9 60-41 60-11-2 60-40 60-33 60-23

DESCRIPTION MAC-TRAC (500 LB. CAPACITY) SCAF-TRAC 7’ & 8’ SPACING (1200 LB. CAP) SCAFF-TRAC EXTENSION (1200 LB. CAP.) I-BEAM SUSPENSION BRACKETS (EACH) TRESTLE/MONORAIL KIT add to 60-41 to make

SPECIFICATIONS use w/SCORPIO use w/ALL HOISTS use w/ALL HOISTS use w/ALL HOISTS use w/NEW VERSION

complete Trestle/Monorail for 1200 lbs. capacity

SCAFF-TRAC

TRESTLE/MONORAIL SUPPORT BRACKET

EXTRA SUPPORT BRACKET TO COMPLETE 2000 LB. CAP. TRESTLE/MONORAIL

add to 60-33 & 60-41 to make complete Trestle/Monorail for 2000 lbs. capacity-required for maximum capacity

SHIP WT. # 146 150 96 29 180

LIST PRICE $725.00 $1,075.00 $875.00 $295.00 $950.00

32

$330.00

ACCESSORIES-ELECTRICAL PART NO. 70-5 70-19 70-13 70-12 70-3 70-10 70-16 50-9-1

DESCRIPTION

SPECIFICATIONS

100’ POWER CORD EXTENSION 10/3 110V 100’ POWER CORD EXTENSION 10/3 110V 100’ POWER CORD EXTENSION 10/3 220V 100 FT. REMOTE CONTROL EXTENSION 85 FT. REMOTE CONTROL EXTENSION 50 FT. REMOTE CONTROL EXTENSION 25 FT. REMOTE CONTROL EXTENSION 6 FT. PENDANT CONTROL COMPLETE

30-113 30-114 70-52-1 70-52-2 70-52-3 70-52-4

110 VOLTAGE BOOSTER 220 VOLTAGE BOOSTER DUAL PENDANT OPTION 110V HOIST 1PH DUAL PENDANT OPTION 110V HOIST 1PH DUAL PENDANT OPTION 220V HOIST 1PH DUAL PENDANT OPTION 220V HOIST 3PH

Boosts Additional 12-24 Volts Boosts Additional 12-24 Volts

70-430-1 70-430-2 70-430-3

110V PORTABLE WIRELESS SYSTEM 2 REMOTES 220V 1PH PORTABLE WIRELESS SYSTEM 2 REMOTES 220V 3PH PORTABLE WIRELESS SYSTEM 2 REMOTES

ALL PORTABLE HOISTS DISCRETE

SCORPIO XL GEMINI PLUS GEM+/NY/LEO 1PH ALL HOISTS- NON VFD ALL HOISTS- NON VFD ALL HOISTS- NON VFD ALL HOISTS- NON VFD ALL HOISTS- NON VFD

SHIP WT. 18 18 18 18 16 8 4 2

SCORPIO XL GEMINI 110V LEO GEMINI 220V NEW YORKER LEO 3 PHASE HOISTS ALL PORTABLE HOISTS DISCRETE ALL PORTABLE HOISTS DISCRETE

LIST PRICE $295.00 $305.00 $305.00 $220.00 $190.00 $165.00 $135.00 $286.00 $600.00 $600.00 $1,600.00 $1,600.00 $1,600.00 $1,600.00 $2,500.00 $2,500.00 $2,500.00

ACCESSORIES-MATERIAL HANDLING PART NO. 70-9 70-2 70-20 70-21 70-47 70-22 70-31 70-23 70-7 70-48 70-45 70-49 70-26 70-27 70-28 70-41 70-42

DESCRIPTION DOUBLE ROPE KIT (LARGE) DOUBLE ROPE KIT (HEAVY DUTY) DUMPSTER BUCKET (24 GALLON) DUMPSTER BUCKET (31 GALLON) DUMPSTER BUCKET (40 GALLON) SCAFFOLD FRAME FORK (600 LB. CAP) BLOCK FORK (400 LB. CAP.) BLOCK FORK (800 LB. CAP.) BRICK FORK (400 LBS. CAP.)

SPECFICATIONS GEMINI PLUS LEO SCORPIO/GEM/LEO GEMINI & LEO GEMINI & LEO HOLDS 10-6’ FRAMES HOLDS 12 REG BLOCK HOLDS 24 REG BLOCK

BRICK TRAY (400 LB. CAP) Uses 70-26 Spreader Bar EQUIPMENT BASKET (800 LB. CAP) Uses 70-27 Spreader Bar BRICK BASKET (400 LB. CAP) Uses 70-26 Spreader Bar

SPREADER BAR 32” SPREADER BAR 40” WHEELBARROW SLING (HEAVY DUTY) MUD TUB ¼ YARD Uses 70-27 Spreader Bar MUD TUB 1/3 YARD Uses 70-27 Spreader Bar

29”LX20”WX20.5”H

SHIP WT. # 7 24 58 68 80 40 36 94 70 28

LIST PRICE $175.00 $375.00 $415.00 $487.00 $550.00 $420.00 $525.00 $675.00 $390.00 $215.00

36”LX36”WX18”H

114

$505.00

30”LX20”WX12”’H

67

$390.00

400 LBS. CAPACITY 800 LBS. CAPACITY 800 LBS. CAPACITY 42”LX27”WX18”H

7 16 6 49

$160.00 $195.00 $390.00 $345.00

42”LX27”WX28”H

57

$455.00

HOLDS 100-4 LB. BRICK


MAXIAL H 125/175ft W 450lbs

HOIST FEATURES •

Hoist of choice for expedited Scaffold Erection & Dismantlement for over 20 years

Up to 20% more efficient use of man power, resulting in less worker exhaustion or risk

of injury and greater productivity •

Perfect jobsite partner for Industrial Boiler Maintenance - engineered to fit easily

through boiler access ports for system scaffold E&D

Narrow Track System option available for

Multi-purpose hoist solution delivers

Durable lightweight design that is easy to

Standard and narrow track systems available

Customized operational heights available

Long lasting performance with minimum maintenance required

Boiler Access Ports less than 24” wide

materials to the job level after scaffold is in place transport and install with no tools required

INDUSTRIES SERVED SAFETY FEATURES • • • •

73

• Scaffolding

• Construction

• Industrial Boiler Maintenance Water tight Connectors Universal Carriage locking device Upper and lower stopping device keeps hoist on the track UL and CUL Listed Enclosed Panels for both the US and Canada

All high speed wire rope hoists are ANSI & OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

082510


MAXIAL H 125/175ft W 450lbs

SPECIFICATIONS Set Up Lift Capacity

450 lbs

Lift Speed

80 fpm

Lift Height*

125 ‘or 175’

Wire Rope Length

250 ft (1/4” GAC) /350 ft (3/16” GAC)

A/C Power

110v, 20amp, 1 Ф. Optional 220v available

Track Wdith

24” Standard, 15” Narrow

* Customized operational heights available. All measurements are based on a standard Maxial system.

MAXIAL SYSTEM COMPONENTS* Baskets (easily interchanged for payload)

Frame Scaffold Carrier 5’4” L x 1’6” D x 6’ H

Universal Platform 2’6” L x 1’5” D x 3’ H

Systems Scaffold Carrier 2’ L x 1’1” D x 6’ H

74

*All Maxial Hoist systems are customized by project operational height. Components vary.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


Industrial Applications Boiler Room - Power Plant Increase Profits While Decreasing Labor Costs & Ensuring Workers Safety

Bridges – Use Multiple Maxials For Increased Production & Complete More Projects Per Year

Increase Safety & Better Allocate Labor


75


76


MAXIAL TRACK HOIST OPERATION CHECKLIST The Maxial was originally designed in 1990 to provide a safe, alternate lifting method for contractors working from frame or systems scaffolding. The Maxial has also become known as the “scaffold erection tool” being used to install and dismantle scaffolding on commercial and industrial scaffolding projects. DAILY CHECKLIST: 9 Confirm power source has not changed and power cord extensions are properly plugged into Power Source and into Maxial Hoist. 9 Check that the Control Box is properly connected to the Motor. 9 Check that the Pendant is properly connected to the Control Box. 9 Confirm the Top and Bottom Rung Locks are locked in place securing Motor to Track Section. 9 Confirm the Sliding Top Section is locked in place securing it to the Track Section. 9 Run the system up to the top and back down visually inspecting wire rope for any kinks, birdcages or breakage. Wire Rope should be replaced if damage is found. If spooling properly, wire rope will evenly reeve onto drum.

WEEKLY CHECKLIST: 9 Check to make sure all Kwik Bolts are tightened securing Track Sections to one another. 9 Check to make sure all Scaffold Clamps are tightened securing Track Sections to scaffolding. 9 Make sure the pulley located at the top of the system in the Sliding Top Section moves freely. 9 Check to make sure the pins securing the material carrier to the Universal Carriage are inserted completely. 9 Look at all rollers on Universal Carriage to notice any “uneven” wear which may indicate Universal Carriage is not tracking properly on the Maxial Track. 9 Check Brake Paw and Brake Spring on the Emergency Brake located on Universal Carriage. The Emergency Brake will stop the carriage from free-falling in the event of wire rope breakage or motor disconnect.

ANY QUESTIONS REGARDING HOIST USAGE AND OPERATION SHOULD BE DIRECTED TO BETA MAX AT 1-800-233-5112

P.O. Box 2750

77

www.BetaMaxHoist.com

Melbourne, FL 32902 TF 800-233-5112

Ph 321-727-3737


78


79


Beta-Max Maxial Track Hoist System I have worked in the scaffolding industry since 1988. In the early 1990’s I was introduced to a machine that changed the entire playing field of that industry. This is my testimonial… The Beta Max Maxial Track Hoist was demonstrated to me, a branch manager, and the owner of a small scaffolding company. I had heard of this machine through acquaintances in the industry, but had never witnessed the use of one. I was very impressed. It built very quickly and attached directly to the system scaffold that we used for the demo. The 3 of us were immediately sold, and purchased that demo model with 100’ of track. My relationship with Beta-Max started on that day. Our company quickly learned that this machine could replace the old daisy chain (man-line) of equipment from the ground to the erection point in the air. The company made great advances in profitability, and our work load utilizing this machine. Increases in our labor revenues and our job completion time(s), made for profit margins unheard of before. Not to mention being able to generate more work for our employee’s. Soon we needed more track and another unit. After leaving that company, I encountered many other companies utilizing this machine. Many had multiple units and countless track sections. We would use 2, 4, or 6 machines in a boiler. The ground crew would generally consist of 5 laborers and a supervisor. The hoist crew would generally consist of 2 laborers, and 2 hoist operators. This would feed the crew above constructing the scaffold, generally 4 to 12 men including a supervisor. Crews were established according to the actual size of the scaffold to be built. Some of the boilers we constructed were well over 200 feet high, and bridges over 400’ tall. The Maxial Track hoist builds right with the scaffolding, as you go up one section at a time. Now, there are other hoist systems. I have seen many different hoists and pulleys used to eliminate the man line (or daisy chain), but none meet the safety aspect or simplicity of the Maxial Track system. You don’t have to fuel it or have wide open area like a forklift; it uses either 120V or 240V electricity that is readily accessible on most jobsites; and it will not wear out, like a man pulling a rope and bucket. The hoist builds right with the scaffolding as you go. Just add more tracks, extend the cable, and your back to work. I have personally used these systems on bridge work, commercial construction, industrial construction with frame scaffold, system scaffold, or tube and clamp type scaffold. You can use any math formula you wish, but dollar for dollar you will not hire anyone who can perform this amount of work; without the breaks, the fatigue, or the wear and tear as the Maxial Track hoist. Using 2 machines doubles your production instantly, and provides for back-up in the unlikely event of machine failure or break down. The Maxial Track hoist packs easily into a small covered trailer, and travels with your crew or equipment. The units are low maintenance, easy to care for, and very simple to operate using a pendant control. There is simply no other way to go. Sincerely, Brian Hill Florida Division Manager at American Construction Hoist West Palm Beach, Florida Area

80

www.BetaMaxHoist.com

1-800-233-5112


Jobs that I have participated in, using the Beta-Max Maxial Track hoist: Power Plants across America: Big Rivers Corporation, Tennessee Valley Authority, Southern Companies, Gulf Power, Florida Power & Light, Jacksonville Electric Authority, Duke Energy, and American Electric Power. Pulp & Paper Industry: ITT Rayonier, Georgia-Pacific Corporation, International Paper, Kimberly-Clark, Weyerhaeuser, & Proctor & Gamble Company. Bridge Work: Bay Bridge Lead Abatement Annapolis, MD (Campbell Painting Corporation) Hospital Work: Flagler Hospital Addition St. Augustine, FL (Patent Construction Systems) Stadium Work: Jacksonville Municipal Stadium Jacksonville, FL Ben Hill Griffin Stadium Gainesville, FL Doak Campbell Stadium Tallahassee, FL

81

www.BetaMaxHoist.com

1-800-233-5112


MAX CLIMBER 1000MB MATERIAL HOIST

H 400ft W 1000lbs

HOIST FEATURES •

Small footprint fits perfectly in the most

Fold down ramp allow materials to be

rugged and confined spaces

loaded and unloaded without double and triple handling

Dedicated cargo carriage engineered to pivot 90° to face structure or deck for ease of loading or unloading materials

Scaffold erection and dismantlement made easy with this material hoist

Installation efficiency ensured with self erecting feature - NO crane required

Optional VFD controller allows for both single and three phase operation

Can attach to scaffolding or anchor directly to the building

Can be engineered for custom job site application

INDUSTRIES SERVED SAFETY FEATURES • • • • • •

82

Commercial: Construction, Demolition, Masonry, Restoration, Scaffold Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

Upper, Lower and Intermediate Floor Stop switches integrated into system Manual brake release lever in case of power interruption during use Failsafe brake holds the load securely when not lifting or lowering loads Sensors detect when basket is in load or unload mode and hoist will not operate Removable overhead protection keep workers safe during load and unload UL and CUL Listed Enclosed Panels for both the US and Canada

All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090910


MAX CLIMBER 1000MB MATERIAL HOIST

H 400ft W 1000lbs

SPECIFICATIONS Set Up Lift Capacity

1000 lbs

Lift Speed

80 fpm

Maximum Anchored Height

400 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

64”x64”

Mast Sections

75lbs per 5ft section

A/C Power

Standard Controller: 220v, 20amp, 3 Ф Optional VFD Controller: 220v, 30amp, 1 Ф

SYSTEM CONFIGURATION

83 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


84


85


MAX CLIMBER 2000MB MATERIAL HOIST

H 500ft W 2000lbs

HOIST FEATURES •

Small footprint fits perfectly in the most

Streamline material delivery to job level

rugged and confined spaces

with dedicated cargo carriage

Installation efficiency ensured with self erecting feature - NO crane required

Three fold down ramps allow materials

Can attach to scaffolding or anchor directly to the building

Fold out installation platform

Durable aluminum car wall panels with car support frame and mast sections of

Can be engineered for custom job site application for temporary or

to be loaded and unloaded without double and triple handling

guarantees faster and easier access when installing wall ties

hot dip galvanized steel permanent use

INDUSTRIES SERVED SAFETY FEATURES • • • • • •

86

Commercial: Construction, Demolition, Masonry, Restoration Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

Upper, Lower and Intermediate Floor Stop switches integrated into system Manual brake release lever in case of power interruption during use Failsafe brake holds the load securely when not lifting or lowering loads Removable overhead protection keep workers safe during load and unload Sensors detect when basket is in load or unload mode and hoist will not operate Fold down loading and unloading ramps with guard rails to ensure worker safety

All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090110


MAX CLIMBER 2000MB MATERIAL HOIST

H 500ft W 2000lbs

SPECIFICATIONS Set Up Lift Capacity

2000 lbs

Lift Speed

80 fpm

Maximum Anchored Height

500 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

112” x 91”

Mast Sections

102lbs per 5 ft section

A/C Power

Standard Controller: 220v, 30amp, 3 Ф Optional Phase Converter: 220v, 60amp, 1 Ф

SYSTEM CONFIGURATION

87 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


MAX CLIMBER 2000PMB MAN & MATERIAL HOIST

H 500ft W 2000lbs

HOIST FEATURES •

Small footprint of 8ft x 8ft fits perfectly in

Streamline material delivery to job level

the most rugged and confined spaces

with dedicated, enclosed cargo carriage

Installation efficiency ensured with self erecting feature and dedicated one piece base system comes to the job site pre-assembled

Fold out installation platform

Can attach to scaffolding or anchor directly to the building

Call Box Option can be installed at each floor landing gate and allows hoist operator

Durable aluminum car wall panels with car support frame and mast sections of

Can be engineered for custom job site application for temporary or

guarantees faster and easier access when installing wall ties

to be called to a specific floor hot dip galvanized steel permanent use

SAFETY FEATURES

INDUSTRIES SERVED Commercial: Construction, Demolition, Masonry, Restoration Industrial: Cement plants, Paper mills, Power plants, Petro-chemical plants, Storage silos

• Upper, Lower and Intermediate Floor Stop switches integrated into system • Manual brake release lever in case of power interruption during use • Failsafe brake holds the load securely when not lifting or lowering loads • Removable overhead protection keep workers safe during load and unload • Sensors detect when basket is in load or unload mode and hoist will not operate • Fold down loading and unloading ramps with guard rails to ensure worker safety

88

All rack and pinion hoists are ANSI/ASSE A10.5 and OSHA compliant. This information is intended to be informative only, and does not constitute a representation or warranty with regard to Beta Max Hoists or any products or services provided. Prices and information are subject to change. Some or all of the renderings in these materials will vary from the actual hoists.

800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com

090910


MAX CLIMBER 2000PMB MAN & MATERIAL HOIST

H 500ft W 2000lbs

SPECIFICATIONS Set Up Lift Capacity

2000 lbs. Personnel: up to 7 passengers

Lift Speed

80 fpm

Maximum Anchored Height

500 ‘

Anchoring Distance

Every 20 ft

Base System Footprint

93” x 95”

Mast Sections

102lbs per 5ft section

A/C Power

Standard Controller: 220v, 30amp, 3 Ф Optional Phase Converter: 220v, 60amp, 1 Ф

SYSTEM CONFIGURATION

89 800-644-6478 | PO Box 2750 Melbourne | FL 32902 | www.BetaMaxHoist.com


90


91


The platform is equipped with loading & unloading ramps. Optional front loading ramps. All Beta Max Hoist Systems meet or exceed ANSI & OSHA specifications.


Website Links Below is a list of video links that show our hoists in action.

http://www.youtube.com/betamaxhoist Scorpio XL 400lb Hoist Video 1 http://www.youtube.com/watch?v=Khk_jtUaIkw Video 2 http://youtu.be/48NPS4AKFH0 Video 3 http://youtu.be/udpLR3lCVY4 Gemini 600/1200lb Roofers Hoist • http://youtu.be/VHPi5746cKA • http://youtu.be/rrn8pa6w3gs Leo Series Hoist (VFD) Variable Speed

2000lb Hoist – precision placement of larger more delicate materials such as glass, unitized curtain wall, cladding, solar panels, marble, granite, large stones, architectural panels and exterior finish system (EFS).

Video 1 http://youtu.be/Apa3IwSDO4c Video 2 http://youtu.be/IrV-KRrDv44 Video 3 http://youtu.be/zqbJGxYB1Mk Video 4 http://www.youtube.com/watch?v=LJ6awNTdQtI Glass Installation on WTC - http://youtu.be/2y2x_2OaNrI Panel Installation - http://youtu.be/CNUkiT0Pozk 4 WTC- Installing the Façade (July 9, 2011) - http://youtu.be/5DfLtPAppHs

92


CONTACT INFORMATION

1895 Robert J Conlan Blvd NE Palm Bay, FL 32905 1-800-233-5112 HOURS OF OPERATIONS: Monday – Friday 8am – 5:30pm EST Sales: Ken Barrett Portable Hoists and Maxial Direct 321-956-9388 Cell 321-482-6612 kbarrett@BetaMaxHoist.com Parts:

Maya Burbano – mburbano@BetaMaxHoist.com

● Direct 321-727-3737 ● Fax 321-768-9517 www.BetaMaxHoist.com ● P.O. Box 2750 ● Melbourne, FL 32902-2750

93

Beta Max Hoist - Material Lifting Solution Guide  

Full range of Beta Max Hoist product line with how to put hoisting systems together, part numbers and hoist specifications.

Read more
Read more
Similar to
Popular now
Just for you