Issuu on Google+

manpower supply – electro – instrumentation – mechanical disciplines – engineering – projects – enterprise of competence


HSE – health, safety and environment policy These policies are to be enforced at all locations where Båtservice has an active participation in ongoing operations. Declaration of Principles

Båtservice shall at all times perform duties in such a way that it does not cause harm to our employees or others, either directly or indirectly by ensuring that our activities, at all times, maintain the highest practical standard for health, saf ety and environment. Health, safety and protection of the environment are equally important in all our basic business, and in our safety measures. To safeguard both human, physical and environmental conditions, is essential for efficiency and success in any business area. Health, safety and to safeguard the environment is everyone's responsibility and requires a direct commitment from all parties, whether it be executives, managers or operators.

Objectives In accordance with these principles Båtservice seeks to achieve the following objectives:

     

Prevent any damage to the work site. Prevent any damage to equipment or property Provide a safe working environment Ensure that all employees are able to perform their tasks in a safe manor Wherever it is practically possible, adapt and exceed all environmental regulations Regularly review the existing routines for health, safety and environment, and seek continuous improvement.


Mandal

Lindesnes

Kristiansand

Malmø Eiendom

Vestnes Brygge

Gismerøya Eiendom


Gismerøya – Head Office and Administration

Total area:

44000m2

Workshop area:

2640 m2

Workshop height:

26m

Crane capacity:

2x40T + 2x10T

Depth at berth:

10,5m

Depth increase Min. depth approach:

1,4m/m 16,5m

Min. width of the approach: 176m


Company Profile Båtservice Contracting AS (BC) is a company in the Båtservice Group which was founded in 1948. BC was registered as a separate company in 1987 and has the subsidiary Båtservice ITC AS (ITC).

We are a supplier to the oil & gas, marine and process industries. The main activity is manpower supply, both skilled workers and engineers, but we also have projects with total responsibility for fabrication, installation and commissioning. Management of BC and ITC are aligned , where BC will take care of mechanical disciplines and ITC electrical disciplines and engineering.

Our head office is located at Gismerøya in Mandal. Båtservice Group has a new modern workshop at Gismerøya, with a deepwater harbor right outside the door. BC and ITC also have offices in Egersund and Stord. Our yard in Stord is approved as an enterprise of competence and specializes in weighing, force measurement and instrumentation. Our workshop has a calibration lab for certification of load pins and dynamo meters, electro and machine workshop.


HEAD OFFICE MANDAL Managing Director Øyvind Hægeland

Operations Manager Kenneth Osberg

Accounting Anne Bodil Usland

STORD

EGERSUND Regional Manager Egersund Ottar Gimre Safety Delegate

Head Safety Delegate Rune Solberg

Regional Manager Stord Randi Stokke

Site-coordinators

Site- coordinator ENTERPRISE OF COMPETENCE Sigurd Hystad Operators

Operators Inspector - Cranes Sigurd Hystad

Inspector – Lifting Devices Trygve Tveit

Safety Delegate


- Oil & Gas industry - Maritime industry - Process industry

Manpower Supply Mechanical Diciplines Admin/Project management Engineering

Projects Mechanical Piping Steel/Alu Structures

survey – engineering – fabrication – installation – commissioning – service/maintenance

Services

Onshore - Offshore


Onshore - Offshore

Manpower Supply - Electro/instrumentation - Admin/Project management - Engineering

Enterprise of competence - Inspection and certification of cranes and lifting equipment - Development, production and sales of weighing systems with instrumentation - Repair, calibration and certification of load cells, load pins and weights - Weighing Operations - Rental of weighing equipment, load cells and weights with instrumentation and logging units

survey – engineering – fabrication – installation – commissioning – service/maintenance

Services

- Oil & Gas industry - Maritime industry - Process industry


Manpower Supply – Mech.

Manpower Supply Mechanical disciplines           

Project Managers Site Managers Discipline Managers Supervisors HSE Project Engineers Service Engineers Struc. Fitters Pipe Fitters Certified Welders Mechanics

Contact info: Operations Manager: Kenneth Osberg +47 95936655 – kenneth.o@batservice.no

Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Regional Manager Egersund: Ottar Gimre +47 48007944 – ottar.g@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no


Manpower supply – E/I

Manpower supply Electro/Instrumentation            

Project Managers Site Managers Dicipline Managers Supervisors HSE Project Engineers Service Engineers El. Struct. fitters Instr. fitters Electricians Automation serv. Fiber Network inst.

Contact info: Operations Manager: Kenneth Osberg +47 95936655 – kenneth.o@batservice.no Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Regional Manager Egersund: Ottar Gimre +47 48007944 – ottar.g@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no


Engineering

 BC has provided engineering services to the industry for more than 20 years and has now introduced this as a separate business area under ITC.  We provide services to the Oil & Gas industry, maritime and process industry, and offer personnel with competence based on our customers requirements, from draftsmen to senior engineers with special expertise.  Our staff is closely integrated to our customers projects. We also recruit personnel from other parts of the world, with relevant experience, and preferably references from previous projects in Norway.  We have provided services to the on and offshore industry for 25 years, and the company management have even more experience in the industry. Our experience results in a close and constructive dialogue with our customers.

Contact info: Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no

Managing Director: Øyvind Hægeland +47 95118211 - oyvind.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Manpower supply – Engineering

Manpower Supply


Projects

Contact info: Managing Director: Øyvind Hægeland +47 95118211 - oyvind.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Projects

 We also take total projects, and can provide complete project teams for hire.  Fabrication of structural steel/alum. and piping  Installation tasks  Commissioning / start-up of equipment  Service contracts  The entire project - from survey to as-built documentation.


Enterprise of Competence

Båtservice ITC in Stord is certified Enterprise of Competence within the following classes: G1 G3 G4 G7 G8 G10 G11 G12

Mobile Cranes Portal / Swing Cranes Bridge / Overhead Cranes Winches /Hoists Truck Cranes Hand-operated cranes Loose items / lifting gear Scene rigs

Contact info: Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Senior Engineer: Sigurd Hystad +47 40402471 – sigurd.h@batservice.no

Managing Director: Øyvind Hægeland +47 95118211 - oyvind.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Enterprise of Competence

Inspection and certification of cranes and lifting equipment


Enterprise of Competence

 Weighing services up to 1200 tons.  Repair/calibration/certification of dynamometers/load indicators and other electronic weighing equipment  Rental of weighing equipment and dynamometers with instrumentation and logging units.  Consultancy–engineering services and trouble shooting by measuring strain and mechanical stress with strain gauge techniques.  Development, production and sale of equipment for weighing and dynamic force measurement with instrumentation

Contact info: Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Senior Engineer: Sigurd Hystad +47 40402471 – sigurd.h@batservice.no

Managing Director: Øyvind Hægeland +47 95118211 - oyvind.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Enterprise of Competence

Development, production and sales of equipment for weighing and dynamic force measurement with instrumentation


Products

 We tailor-make load pins, dynamometers and shackle bolts based on our customer’s specs. Standard material is UGIM 165M, but other materials are available upon request.  We recommend an external amplifiers, but can also supply pins with internal amplifier cards.  The instruments/amplifiers come with cables or wireless signal, and can be equipped with logging functions for reading of misc. parameters over a period of time  Our products are also available in EX/ATEX version.

Contact info: Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Senior Engineer: Sigurd Hystad +47 40402471 – sigurd.h@batservice.no

Managing Director: Øyvind Hægeland +47 95118211 - oyvind.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Enterprise of Competence

Enterprise of Competence


Enterprise of Competence  We provide complete weighing and force measurement systems based on our customer’s specs.

Local readout

Winch Wire-drum

Control room readout

- Amplifer - PLC with calculations - Power supply

Motor Force

Bakes

Sensor example:

- Loadpin omn wire sheave - Pressure transmitter (hyd.or pneum) - Position/prox sensor on drum - Current measurement on motor - Loadpin on break - Force sensor on foundation

Contact info: Regional Manager Stord: Randi Stokke +47 47463452 – randi@batservice.no Senior Engineer: Sigurd Hystad +47 40402471 – sigurd.h@batservice.no

Switchboard: +47 38278010 Fax: +47 38263381 E- mail: post.ITC@batservice.no www.BContracting.no

Enterprise of Competence

Systems


BC Personal database

We have made our own database for registering of personnel, competence, customers and projects. This tool give us quick and accurate response to our customers requests.


Reference list Our main customers are located in Norway, but we also have project references from Finland, Iran, South Korea, China, Singapore, The Netherlands, Brazil, Poland and the USA • • • • • • • • • • • • • • • • • • •

Aker Stord Aker Egersund Aker Offshore Partner Aker MH National Oilwell Flekkefjord Slipp & Maskinfabrikk Simek GE Healthcare Simex Rotator Norway Agdermaskin Norfas Norton Hydra Marine Advantec Apply Eidesvik Odim Seadrill

• • • • • • • • • • • • • • • • • • •

Eiken Mek. Verksted Parat Anders Halvorsen Rosenberg Verft Maritime GMC Westamarin UMOE Mandal Sigurd Seland Lyngdal Mek Offshore Marine NLI Alfred Andersen NLI Engineering Finn & Albert Egeland ABB Vetco Aibel Reime AS Gunneo Oma båtbyggeri Westcon Ølen Statoil

• • • • • • • • • • • • • • • • • • •

Kværner Fjellstrand Nymo Mek Verksted Rogaland Skipsservice Per Skarveland Rør Kværner Installasjon OIS Leirvik Sveis Randaberg Sveis PM Engineering Norske Fabricom Heerema Tønsberg Promeco Bjørge Offshore Peder Halvorsen WME Westcon løfteteknikk Munch Cargotec PGS


Contact info. Head Office Gismerøyveien 227 P.O Box 354 4503 MANDAL Swichboard: +47 38 27 80 10 Fax: +47 38 26 33 81 Post.BC@batservice.no Post.ITC@batservice.no www.BContracting.no

Managing Director:

Øyvind Hægeland +47 95118211 oyvind@batservice.no

Operations Manager:

Kenneth Osberg +47 95936655 kenneth.o@batservice.no

Stord: Vabakkjen 6 P.O Box 18 5401 Stord Regional Manager: Randi Stokke Mobil: +47 47 46 34 52 Mail:randi@batservice.no Enterprice of competence: Sigurd Hystad +47 40402471 sigurd.h@batservice.no

Egersund: Regional Manager: Ottar Gimre +47 48007944

ottar.g@batservice.no


Firmapresentasjon_engelsk