Page 95

1.3.2.2 Set up internet mapping service port of C1 Control card default port is: 31299, and if the router can send this port’s data to the control card, then users can omit following operation. Under stand-alone mode, users can set internet mapping port of C1: 31300 (for example). Method of switching to stand-alone mode: click “Options” on Menu barSoftware SetupCommunication Parameterstick the box in the front of “stand-alone mode”click “OK”. As shown in image 19-10 in below:

Figure 19-10 Method of setting up the port: click “Options” on Menu barHardware Setupinput password 888 input 31300 in “open internet mapping port” click on “Send” button. As shown in image 19-11 in below:

Figure 19-11 1.3.3 Connecting control card with router (configure R1; R2 configuration is similar with R1): Step 1: When connecting computer with router, input router IP address (often it is 192.168.0.1) in IE explorer, then enter into the router’s configuration interface and login ORAY domain name in the Dynamic DNS option. Take TP_LINK for example, set up Dynamic DNS, users can calling 86-20-8565 7675 for all information of this website and routers setup. As shown in image 19-12 in below:

NEW_CATALOGUE_2013  

NEW CATALOGUE

NEW_CATALOGUE_2013  

NEW CATALOGUE

Advertisement