Page 82

Fisch Axcaliber Forstner Bit An excellent cutting edge gives clean smooth cuts every time. Designed to perform in soft and hard wood as well as manufactured boards, these high quality Forstner bits have been made from one piece of steel for added strength. For convenience, the Forstner bits fit any quick change system, including Festool’s Centrotec and can be used with tools that accept 1/4” shank hex as well as standard drill chucks. Inc.vat Ex.vat Code 15mm £14.50 £12.08 507216 20mm £16.50 £13.75 507217 25mm £18.97 £15.81 507218 30mm £20.75 £17.29 507219 35mm £24.96 £20.80 507220 Set of 5 £84.96 £70.80 717874

HSS Colbalt Countersink Beam Drill Deep cut flutes give fast waste removal while the leads ensure accuracy. An industrial quality beam drill milled from solid stock with a centre point for location and a pair of cutting spurs. Designed for drilling through beams, gate posts and so on, but also most useful when drilling deep holes on the lathe. Length 250mm, spiral length 200mm. N.B. The 12mm has a 10mm diameter shank and a reduced shank length of 30mm. Inc.vat Ex.vat Code 6mm £7.39 £6.16 502145 8mm £7.86 £6.55 502146 10mm £8.74 £7.28 502147 12mm £9.97 £8.31 502148

HSS-M2 Fast Cut Pen Drill Bits Drill accurate holes in the end grain of wood and acrylic. These drill bits are ideal for drilling pen blanks when woodturning. The high quality HSS M2 steel gives the cutting edge maximum wear resistance while the parabolic flute design clears the chips quickly. It also helps prevents chip burn and reduces the risk of jamming. Packed in reusable storage tubes. 150mm length. Inc.vat Ex.vat Code 7mm £13.20 £11.00 502103 7.94mm(5/16”) £13.98 £11.65 502104 8.73mm(11/32”) £15.97 £13.31 502105 9.53mm(3/8”) £16.50 £13.75 502107 10mm £16.50 £13.75 502172 10.32mm(13/32”) £19.50 £16.25 502173 10.72mm(27/64”) £20.50 £17.08 502108

Excellent cutting features on a wide variety of materials. These countersinks guarantee a smooth surface thanks to the unequally divided cutting edges. The chatter and burr free finish ensures they are suitable for nearly all materials from ferrous and non-ferrous metals to synthetic materials, soft and hard. Designed for all kind of borings and available in 3 sizes 10-4mm, 12-4mm and 16-5mm.

Ex.vat £8.32 £9.95 £12.88

Code 500742 500743 504740

Rapid chip ejection and cleaner hole drilling in timber. If you are a joiner, carpenter or carry out installations or renovations on site, the four spiral design of these auger speed cut drill bits guarantee rapid and precise results. Cutting faster and cleaner than a traditional flat bit, the full screw-point tip is self-feeding for effortless drilling in any type of soft, hard or laminated wood. Four cutting spurs, four cutting edges and four spirals ensure rapid removal of the waste. The 1/4” hex shank provides non-slip grip in a drill chuck or use in a quick-change system. The Speed Cut augers are 150mm long overall; the set consists of 5 auger bits: 14, 16, 18, 20 and 22mm, and a 150mm extension with 1/4” hex socket and shank, ideal if you need to drill at great depths. Inc.vat Ex.vat Code 6 Piece Auger Speed Cut Set £29.98 £24.98 104269

Cutting Length- 165mm

Drill deep neat holes in soft and hard woods.


Inc.vat £9.98 £11.94 £15.46

6-Piece Auger Speed Cut Set

Elite Auger Bits These high quality auger bits are chrome plated for high corrosion resistance and low friction making them ideal if you need to drill into wet woods or you work in moist surroundings. They have special lengthways grooves on the drill head which causes less stress and have deep spirals allowing efficient chip flow when you need to drill deep holes. Equally effective in soft and hard woods, the chrome plating and the perfect geometry result in a low energy input making drilling easier and importantly, less time is taken drilling each hole. 320mm length. Inc.vat Ex.vat Code 12mm £18.48 £15.40 502094 20mm £23.95 £19.96 502097

10-4mm 12-4mm 16-5mm

SP Auger Bit Drill longer lengths quickly and in thicker workpieces. Ideal for cabling work and pipework access, the threaded centre point pulls the auger bit through the wood, bringing the counter cutting edge into play. Removing waste material quickly, there’s minimal risk of the bit getting jammed inside a workpiece meaning you can work more efficiently whatever the task. Available in two lengths 235mm (flute length 165mm) and 460mm (flute length 390mm). Shanks have flats for positive seating in a drill chuck with sizes 6-9mm having a 7mm shank, 10mm having a 9mm shank, and all others having a 12mm shank.

6mm 8mm 10mm 12mm 13mm 16mm 18mm 20mm 22mm 24mm 32mm Cutting Length- 390mm 6mm 8mm 10mm 12mm 14mm 24mm 26mm

Bulk discounts available on all Fisch

Overall Length- 235mm Inc.vat £8.76 £8.76 £8.98 £9.74 £9.97 £11.46 £12.97 £13.25 £14.98 £17.47 £27.96

Ex.vat £7.30 £7.30 £7.48 £8.12 £8.31 £9.55 £10.81 £11.04 £12.48 £14.56 £23.30

Code 502073 502074 502075 502076 502077 502078 502079 502080 502081 502082 502083

Overall Length- 460mm Inc.vat £17.98 £21.46 £17.95 £18.46 £20.50 £32.46 £36.49

Ex.vat £14.98 £17.88 £14.96 £15.38 £17.08 £27.05 £30.41

Code 502084 502085 502086 502087 502088 502092 502093

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster