Page 78

Woodboring

Forstner Bits Clean drilling bits for use in portable or stationary drilling machines. These are rim-guided rather than point guided, allowing just part of the bit to be used at one time. This means you can drill overlapped, angled, or partial holes. They’re equally effective when drilling at 90º, producing clean, precise flat bottomed holes from 10mm up to 50mm diameter. This makes them perfect for cutting recess holes for hinges and holes for plugging, plus they’ll eat up end grain with ease too. Made in Austria. Inc.vat Ex.vat Code Inc.vat Ex.vat Code 10mm £8.45 £7.04 501920 25mm £11.88 £9.90 501931 12mm £8.64 £7.20 501921 26mm £12.19 £10.16 501932 12.7mm (1/2”) £8.74 £7.28 501950 25.4mm (1”) £11.94 £9.95 501951 14mm £9.48 £7.90 501923 28mm £13.49 £11.24 501933 15mm £9.89 £8.24 501924 30mm £13.68 £11.40 501934 16mm £9.98 £8.32 501925 32mm £14.47 £12.06 501935 18mm £10.48 £8.73 501926 35mm £16.27 £13.56 501936 19mm (3/4”) £10.64 £8.87 501927 38mm £17.68 £14.73 501937 20mm £10.74 £8.95 501928 40mm £18.48 £15.40 501938 22mm £10.98 £9.15 501929 45mm £21.96 £18.30 501939 24mm £11.46 £9.55 501930 50mm £24.97 £20.81 501940

Adjustable TCT Boring Bit Never be without the right size cutter again. An adjustable Forstner style bit that gives you all the benefits of a standard Forstner and beyond. With an easy-toread scale, it can be adjusted to cover a range of full and half sizes from 22mm to 54mm too; thus saving you space in the toolbox and money. The durable tungsten carbide cutting edges and heavy duty construction mean it can be used for a range of materials. To produce clean and accurate holes, we recommend use on a pillar drill at low speeds. Inc.vat Ex.vat Code 22mm - 54mm £67.50 £56.25 501990

Quick Change System Forstner Bit An excellent cutting edge gives clean smooth cuts every time. Designed to perform in soft and hard wood as well as manufactured boards, these high quality Forstner bits have been made from one piece of steel for added strength. For convenience, the Forstner bits fit any quick change system, including Festool’s Centrotec and can be used with tools that accept 1/4” shank hex as well as standard drill chucks. Inc.vat Ex.vat Code 15mm £14.50 £12.08 507216 20mm £16.50 £13.75 507217 25mm £18.97 £15.81 507218 30mm £20.75 £17.29 507219 35mm £24.96 £20.80 507220

Long Series TCT Boring Bits Repeatable precise, chip free, clean holes. Utilising the tungsten carbide tipped cutting spurs, these bits make light work of all types of solid and manmade timbers, time after time. You can either drill the full hole or part way through, leaving a clean flat bottomed hole. The 120mm overall length allows deep holes to be drilled with ease. Inc.vat Ex.vat Code 20mm TCT Bit 10mm Shank £21.97 £18.31 952751 25mm TCT Bit 12.7mm Shank £22.30 £18.58 952752 35mm TCT Bit 12.7mm Shank £28.39 £23.66 952778 40mm TCT Bit 12.7mm Shank £35.50 £29.58 952779

78

Quick Change 5 Piece Forstner Bit Set 5 popular sizes, superb performance. These high quality Forstner bits cut exceptionally clean flat bottomed holes. The sizes include 15, 20, 25, 30 and 35mm. The specially designed 1/4” hex shanks will fit into any quick change system including Festool’s Centrotec. Made in Austria, their incredibly sharp cutting edges give smooth cuts every time resulting in accurate holes. Manufacturing each bit from a single piece of steel means they are exceptionally strong. Inc.vat Ex.vat Code Quick Change Forstner Bit Set (5) £84.96 £70.80 717874

Find the right tool for the job from over 15,000 products @ axminster.co.uk

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster