Page 71

Fuji Spray System

T-Series Air Caps Get the most out of your spray system. Finest 0.8mm (.030”) size Aircap Set for finest atomisation. Suitable for inks, shading, mist coats and spray tanning.

Mini 3 Cup Set For touching up those hard to reach spots.

Extension Whip Hose for Fuji HVLP Sprays Easy to manoeuvre for effortless spraying. The hose is 1.8m of lightweight and highly flexible hose, making it easier to spray for longer. An added feature is that the air through the spray gun is reduced by 10°C (due to the fact the spray gun is now 1.8m further from the turbine). This can often alleviate problems with fast drying lacquers drying too quickly. It has tough glass fibre reinforced polymer fittings. Inc.vat Ex.vat Code 1.8m Extension Hose £37.50 £31.25 110343

The 285ml miniature cup assembly fits all Fuji turbine suction spray guns (past and present) except the Xpc and GT-X Gravity versions. Supplied with two extra cups and three heavy duty lids equipped with gaskets. The small size allows access into confined areas such as cabinets, bookshelves etc. The cup is pressurised so the spray pattern is always perfect. You will think of many uses for these cups - storing paints and stains. It’s also great for quick colour changes or any type of touch-up work. Guitar makers and auto touch-up are just two areas where this cup assembly is proving to be popular. Inc.vat Ex.vat Code Mini 3 Cup Set £47.00 £39.17 310202

Fine 1mm (.039”) size Aircap Set for finer atomisation. Suitable for most water-based lacquers and shading. Standard 1.5mm (.060”) is installed in all Xpc spray guns. Aircap Set is perfect for most fine finishing. High output 1.8mm (.070”) Aircap Set for faster coverage of large areas with any type of paint. High output 2.0mm (.090”). Great for spraying large surfaces such as walls with emulsions. Expect some slight texture. For T70 & T75 Series spray guns only. Inc.vat 0.8mm (0.030”) Inks, Shading, Spray Tanning £64.00 1.0mm (0.039”) Lacquers, Shading, Water Based Coatings £59.00 1.3mm (0.051”) Standard Fine Finishing, General Purpose £59.00 1.5mm (0.060”) Fine Finishing, Lacquers, Enamels, Polurethanes, Latex £59.00 1.8mm (0.070”) Paint, Varnish, Fast Finishing £59.00 2.0mm (0.078”) Exterior Paints, Splatter Paints, Emulsions £59.00

Ex.vat

Code

£53.33

505158

£49.17

505159

£49.17

505160

£49.17

505161

£49.17

505162

£49.17

505163

3100 Spray Gun Cleaning Kit

Long Pressure Tubes For T75 & 9960 Spray Guns

Keep your gun firing like new.

An essential item to have in a spray spares kit. These pressure tubes with check valves will fit any Fuji 1.1 litre (quart) bottom fed cup gun. The Fuji industrial spray check valve is a one-way check valve featuring a convenient duckbill design. Each check valve comes with an attached pressure tube. Supplied in a pack of 5. Inc.vat Ex.vat Code Pressure Tubes For T75 & 9960 Spray Guns (Pkt 5) £18.35 £15.29 102589

A 19-piece spray gun cleaning and maintenance kit, including lubricant. This kit contains just about everything you will need to keep any spray gun in peak condition. It includes an extra long 300mm pick-up tube brush. Also within the kit are an HVLP brush, body cavity brush, detail end brush, nylon bristle parts brush, 5-piece micro brush set, 6-piece precision needle set and spray gun lubricant. Cleaning Kit

Inc.vat £22.85

Ex.vat £19.04

Code 101563

Fuji Xpc Air Caps Fine 1mm (.039”) size Aircap Set for finer atomisation. Suitable for most water-based lacquers and shading. Standard 1.4mm (.055”) is installed in all Xpc spray guns. Aircap Set is perfect for most fine finishing. High output 1.8mm (.070”) Aircap Set for faster coverage of large areas with any type of paint.

Fuji 2Qt Pressure Pot Assembly Kit Spray larger areas without the need to refill. This kit has everything you need to benefit from the increased capacity using your four-stage Fuji Spray HVLP System. The 2.25L capacity is twice as much as a standard and three times that of a gravity fed gun. There is now little weight for you to carry and manipulate so spraying is less tiring for your arm and wrist. Without an attached pot the spray gun will fit into smaller places and is able to spray at any angle, even upside down.

UJK Technology Paint Points

Please note, you will need both a standard 7.6m hose plus a 2049F Whip Hose in order to use your Fuji Spray 2Qt Pressure Pot.

Everyone should own at least one set of these. Paint Points save time, letting you finish both sides of your work in a single session. Made in the UK and entirely from stainless steel. Supplied in a pack of 6. Paint Points (Pkt 6)

Inc.vat £9.95

Ex.vat £8.29

Code 105085

If using model 9600-G – GXPC Spray Gun, you will also need the 9060 L-fitting supplied with 2Qt pressure pot plus adaptor, 1,800mm material fluid hose, quick-connect coupler, pressure tube and check valve and nipple caps. Inc.vat Ex.vat Code 2 Quart Pressure Pot Assembly Kit £229.99 £191.66 101564 9060 90 Degree L-Fitting £11.20 £9.33 103702

Extra high output 2.2mm (.086”). Great for spraying large surfaces such as walls with emulsions. Expect some slight texture. For Xpc spray gun only - does not fit older Fuji spray guns. Inc.vat Ex.vat Code 1mm (.039”) Air Cap (Lacquers, Shading) £61.00 £50.83 211964 1.4mm (.055”) Air Cap (Fine Finishing) £61.00 £50.83 211965 1.8mm (.070”) Air Cap (Paint, Varnish) £61.00 £50.83 211966 2.2mm (.086”) Air Cap (Exterior Paints) £61.00 £50.83 211967

9622 Touch-Up Spray Gun When places are hard to reach you need something a little smaller. You can use this gun with any Fuji HVLP turbine. Just attach the quickconnect coupler to your hose and begin spraying. The Touch-Up gun comes with a 225cc capacity cup. It has a 1.0mm stainless steel needle, nozzle and aluminium aircap. The spray pattern is adjustable from round 6mm to 150mm. This spray gun is really handy for projects that require smaller touch-up work. Inc.vat Touch Up Gun £140.50

Free delivery on orders over £30 (UK mainland only) under £30 just £2.95

Ex.vat Code £117.08 101560

71

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster