Page 315


FET Table Saw With a height adjustable and tilting saw blade up to 45°, this table saw is designed for precise, straight cuts and the cutting of double mitres when used with the angle stop.

KS 230 Saw A small precise mains driven modelling saw with an 8mm depth of cut using the standard 58mm diameter blade.

Made for the fine mechanic, model builder, mould making, toy manufacturer, architect, model carpenter and fitter. A variety of optional blades allow this table saw to cut a wide range of materials, such as wood, non-ferrous metals, plastics, Plexiglas, PC cards, foam and many others. The plane milled table and load bearing parts are made of diecast aluminium making the FET saw very stable. For easy access, the table and drive lift meaning it’s simple to clean or change the saw blade. The micro-adjustable, precise cut length stop allows cuts as small as 0.1mm to be made and as deep as 22mm. Driven by a special DC motor with Optibelt toothed belts connecting it to the main ball bearing supported shaft. Standard equipment supplied with the saw includes a 24 tooth hard metal equipped saw blade 80 x 1.5 x 10mm, a push stick and a non-slotted polycarbonate sawing table inset for tight tolerances between saw blade and table when cutting small parts. The FET has a dust adaptor suitable for connection to a vacuum for dust free working.

FET Table Saw 230V Supercut Blade 85mm x T80 TCT Blade 80mm T24 TCT Blade 80mm T36 Diamond Coated Blade 85mm

Inc.vat £366.96 £14.20 £15.90 £20.84 £52.96

Ex.vat Code £305.80 210576 £11.83 300151 £13.25 28734 £17.37 702068 £44.13 28735

Featuring a fully machined aluminium 160mm x 160mm table top mounted on a sturdy ABS base, the saw comes with a mitre fence and rip fence. A 34mm diameter dust extraction port is located at the rear of the machine. For cutting a range of different materials, a variety of blades are also available. Inc.vat Ex.vat Code KS230E Saw 230V £116.95 £97.46 300095 Blade 58mm 80T £9.95 £8.29 300108 Solid Carbide Blade 50mm £37.40 £31.17 702072 Diamond Blade 50mm £25.85 £21.54 702073 Precision Fine Blade 50mm £8.84 £7.37 300109 Carbide Tipped Saw Blade T10 £10.90 £9.08 702074 TCT Saw Blade T20 £13.45 £11.21 702075

Saw Blades 300151 - Super Cut

28734 - Tungsten Carbide Tipped

85mm diameter x 0.5 x 10mm bore, 80 teeth. For use on hard wood, soft wood and plastics.

(TCT) 80 x 1.5 x 10mm. 36 teeth. For use to cut balsa, plywood, hard and soft woods, polycarbonate, plastic, aluminium and PC cards

702068 - Tungsten Carbide Tipped

28735 - Diamond Coated

(TCT) 80mm diameter x 1.5 x 10mm bore, 36 teeth. For use on hard wood, soft wood, plastics and aluminium.

85mm diameter x 0.7 x 10mm bore. Use on glass, stone and tiles.

MBS 240/E Micro-Bandsaw

TBM 220 Bench Drill

Featuring a solid, ribbed die-cast aluminium housing rather than a tubular or sheet metal construction, this bandsaw is excellent for accurate mitre sawing.

Plane milled worktable of diecast aluminium (220 x 120mm) with adjustable fence and scale as well as threaded holes for securing the MICRO compound table KT 70.

Its sturdy, machined table with slot for mitre gauge measures a generous 200 x 200mm and for accurate mitre sawing, the table tilts through 45°. The machine features double ball bearing aluminium pulleys and is powered by a low noise 230V motor (high quality, for quiet, prolonged use) with toothed belt drive. The speed is controlled electronically for exceptionally accurate cutting. A clear table indicates the recommended speed for most materials. The blade size (5.0 x 0.4 mm) is ideal for fine work, allowing cutting of small radii. Standard equipment includes one 1,065 x 5.0 x 0.4 mm (14tpi) bandsaw blade. A range of blades are available including a diamond blade for cutting glass and ceramics.

Featuring a solid, hard-chromed steel column, 280 high x 20mm diameter, the super stable die cast head comes with a VDE approved 230V, 85W motor. Power transmission is by aluminium pulleys and flat belt. There are three spindle speeds of 1,800, 4,700 and 8,500 rpm. Chrome feed lever with adjustable depth scale. The spindle is supported by three high quality sealed bearings. The recessed spindle is for insertion of MICROMOT steel collets, but also threaded for drill chucks 3/8” thread giving extremely high rotational accuracy with 30mm feed. The quill diameter is 32mm, with return spring. Throat depth, column to drill spindle, 140mm. Quick coarse height adjustment of headstock is with clamp levers. Maximum height 140mm. Supplied with six triple slit precision collets (1.0, 1.5, 2.0, 2.4, 3.0, 3.2mm).

MBS 240/E Micro-Bandsaw 230V Blade for MBS240/E - 14tpi Blade for MBS240/E - 24tpi Bi-Metal Blade for MBS240/E Diamond Blade for MBS240/E

Inc.vat £287.95 £13.45 £13.45 £25.45 £124.96

Ex.vat £239.96 £11.21 £11.21 £21.21 £104.13

Code 474198 476761 476760 210598 474558

Accessories include Proxxon KT 150 Aluminium Diecast Compound Table (474334) on page 316 and Proxxon MS 4 Machine Vice (486352) on page 314. Inc.vat Ex.vat Code TBM 220 Bench Drill 230V £166.96 £139.13 702060

Join our email club - the best way to get deals, news and much more from Axminster


Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster