Page 231

Dowel Cutters Make dowels from any species of timber. These cutters work equally well in soft, green or hard woods. Handheld like a pencil sharpener, they put accurate tenons on the tips of turnings or rustic furniture components. Alternatively using a cordless drill, you need only cut square stock slightly oversize (1.5mm is ample). Use Veritas 1/2” socket with the 3/8” and 7/16” cutters or a 5/8” drive with the 1/2” cutter. You may also need a 3/8” sq drive to 1/4” hex adaptor to use with these drives and power the stock through the dowel cutter. Imperial sizes only available. Inc.vat Ex.vat Code 3/8” (9.5mm) £38.56 £32.13 202380 7/16” (11mm) £38.56 £32.13 202381 1/2” (12.7mm) £38.56 £32.13 202382

Shelf-Drilling Jig Perfectly level shelves for your woodworking library. The jig guarantees that holes for shelf supports will be exactly opposite each other and at equally spaced intervals. The 610mm(24”) long rails each have 20 holes drilled at 1” intervals. The 20mm long hardened drill bushes ensure the holes are at exactly 90°. The jig comes with regular length clamp rods for use with material 300mm(12”) wide or narrower. Optional longer rods are available for material up to 610mm(24”) wide or for work up to 915mm(36”) wide.. A 7mm punch with a hardwood Inc.vat Ex.vat Code handle is included for setting most common support/sleeve £135.00 £112.50 474283 combinations. Eleven drill bushes are included: sizes 5, 6, 6.75, Shelf-Drilling Jig Pair Long Rods £12.30 £10.25 476687 7, 7.5, 8(5/16”), and 9mm, 7/32”, 1/4”, and 3/8” and an Pair Extra-Long Rods £13.99 £11.66 476327 unhardened bushing.

Dowel Cutters Drive Sockets 3/8” square drive sockets with square recess The 1/2” socket is for use with the 3/8” and 7/16” Veritas dowel cutters and the 5/8” socket with the 1/2” dowel cutters. Both sockets are 3/8” square drive. Inc.vat Ex.vat Code 1/2” Square Socket £3.85 £3.21 202383 5/8” Square Socket £4.60 £3.83 202384

Dowelling Jig 3/8” Square Drive to 1/4” hex Adaptor Adaptor for power dowel cutting. 3/8” square drive to 1/4” hex shank adaptor. For use with the Veritas cutter range. Inc.vat Ex.vat Code Square Drive to Hex Adaptor £1.80 £1.50 477873

Joint boards with spot-on alignment and extra strength. Using a dial, each micrometer clamp head can be set from 6mm to 13mm from the centre line to handle work from 13mm to 25mm thick. The setting is positive and accurate to a few thousandths of an inch. The clamp heads will grip work as small as 13mm x 35mm. By using the tapered pin to register off the last hole drilled, you can quickly chain drill dowel holes for tabletops or panels. The movable bush carrier comes with 3 hardened steel bushings: 1/4”, 8mm(5/16”), and 3/8”. Other sizes are available. Inc.vat Ex.vat Code Dowelling Jig £92.50 £77.08 474668

Auger Gimlets The ideal starter kit. Quick and easy screw starters, auger gimlets have a tapered screw tip and an auger body. The 7 sizes in the set range from 2mm to 5mm (5/64” to just over 3/16”), which will handle the pre-drill for screw sizes No.2 to No.10. They are particularly useful for short screws or screws in awkward places, both of which present problems for power pre-drilling. Inc.vat Ex.vat Code Auger Gimlets £10.15 £8.46 476739

HSS Brad Point Drills Looking for the very best drill bits for wood?

Metal Bender Turn a mechanic’s vice into a metal bender.

Journeyman’s Brass Mallet Perfect weight for perfect control. Use this mallet with a normal grip or nestle it in the palm of your hand for exact control of the force. The brass head has a threaded connection to the handle for a secure fixing. The final turning of the handle is done after the handle is mounted, ensuring a smooth transition between the head and cherry handle. Overall length 150mm, weight 570g. Inc.vat Ex.vat Code Mallet 570g £25.30 £21.08 202385

This metal bender allows anyone to form a metal part with control. The product has 2 parts: the male die and the V-block. Both are made of high strength malleable cast iron, capable of bending up to 3.2mm mild steel. Each piece (about 75mm long by 28mm wide) clamps itself against a vice jaw using embedded rare earth magnets. The main purpose of the metal bender is to make bends up to 90° for such things as angle brackets and sheet metal parts. A versatile and inexpensive tool for any workshop. Inc.vat Ex.vat Code Metal Bender £17.10 £14.25 476080

American made,Veritas reshape and sharpen the tips on their state-of-the-art Swiss CNC grinder. Made from high-speed steel, these bits are not subject to burning and stay sharp about 10 times longer than carbon steel bits. The polished flutes give superior chip clearance and the sharply defined lips have a slight negative rake to score the hole perimeter for clean entry and smooth sidewalls. The diameters of these bits conform to exacting standards of accuracy. Inc.vat Ex.vat Code 3mm £3.70 £3.08 502442 4mm £4.45 £3.71 502443 5mm £5.20 £4.33 502444 6mm £5.95 £4.96 502445 7mm £7.20 £6.00 502446 7.5mm £7.55 £6.29 502447 8mm £8.75 £7.29 502448 9mm £10.60 £8.83 502449 10mm £11.40 £9.50 502450 12.5mm £16.45 £13.71 502451

Free delivery on orders over £30 (UK mainland only) under £30 just £2.95

231

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster