Page 229

Veritas

Now watch the video online!

Now watch the video online! Dovetail Saw

Tenon Saws

Accuracy and full control assured. This innovative saw features a permanently moulded spine, which imparts just the right amount of weight to carry the saw effortlessly into the cut. The hardwood handle is shaped to fit the hand comfortably and is reminiscent of the rear tote on a bench plane. This theme is carried on in the steel rod that passes right through the handle and the brass nut used to attach the handle to the rod. A mortice and tenon joint between handle and back ensures a good solid and secure fixing. The blade is Japanese high-carbon steel, 230mm long by 40mm deep, with 14tpi teeth filed with a 14° rake angle. Inc.vat Ex.vat Code 230mm x 14tpi £58.96 £49.13 210923

Classic saws made with state-of-the-art materials.

Fine-Tooth Dovetail Saw A fine-tooth saw for fine dovetails. For woodworkers who prefer a fine-tooth dovetail saw, Veritas produce a premium example with a 20tpi filed for rip cutting. It has a 235mm long by 0.5mm thick high-carbon steel blade. The teeth have a rake angle of 14° and an included angle of 60°. The depth of cut is about 40mm. The spine of the saw is injection moulded under high pressure onto the blade. The material used for the spine incorporates stainless steel powder for weight and glass fibre for stiffness. A brass nut fastener secures the shaped hardwood handle. Overall length 360mm. 230mm x 20tpi

Inc.vat £58.96

Ex.vat £49.13

Code 211804

Now watch the video online!

Crosscut Carcass Saw

The teeth on these thin high-carbon 400mm long steel blades provide a good balance between cutting action and surface finish. The design of the hardwood wooden handle has been developed to give good power transfer while still allowing a three or four finger grip for precise control. The crosscut saw has 12tpi with a 15° rake and an included angle of 60°; set is 0.06720mm per side. The rip saw has 9tpi with a 14° rake using the typical 60° included angle; set is the same as on the crosscut saw. Inc.vat Ex.vat Code Rip Cut 9tpi £105.95 £88.29 506361 Cross Cut 12tpi £105.95 £88.29 506362

Now watch the video online!

Small Crosscut Saw

Designed for precision crosscutting. Somewhat smaller than a tenon saw, the carcass saw is designed for greater control when it comes to crosscutting tenon shoulders and similar tasks requiring a degree of precision. The blade is a 275mm long by 0.5mm thick high-carbon steel filed crosscut at 14 tpi. The unique construction and innovative design combine to produce a saw with a solid one-piece blade/spine/mount assembly with a secure, comfortably shaped hardwood handle. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficiently sever wood fibres rather than tear. The depth of cut is 60mm. Overall length 415mm. Inc.vat Ex.vat Code 275mm x 12tpi Crosscut £61.50 £51.25 950978

Great balance, cuts easily, stays true. The saw has a 235mm long by 0.5mm thick high-carbon steel blade filed with 16tpi. The teeth have 15° rake and bevel angles. The depth of cut is about 40mm. The back of this saw is injection moulded under high pressure onto the blade and stainless steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped hardwood handle. The saw’s pistol grip helps make the saw feel like an extension of your arm. Overall length 360mm. Inc.vat Ex.vat Code 230mm x 16tpi Crosscut £58.96 £49.13 211803

Rip Cut Carcass Saw A workshop workhorse. This saw has great balance, it cuts easily, stays true and the grip makes for a comfortable and secure grip. The saw has a 275mm (11”) long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10° an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm. The innovative design, construction and choice of materials combine to produce a saw with fantastic performance. Overall length 415mm (16.1/4”). Inc.vat Ex.vat Code 275mm x 14tpi Rip Cut £61.50 £51.25 950979

Flush Cutting Saws Rapid trimming of plugs and dowels. Flush cutting saws are used to cut off a projection without damaging the surrounding surface. The Japanese tooth pattern blade cuts aggressively (on the pull stroke), but does not leave a mark. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control. The saw is available with teeth cut on only one edge with no set or in a double edged style that cuts from either side with the teeth set in one direction. Each is about 290mm long with 120mm of blade. These work like a charm. Double Edge 22tpi Single Edge 26tpi

Inc.vat £19.55 £17.60

Ex.vat £16.29 £14.67

Code 475855 504598

Call free 0800 371 822 Visit axminster.co.uk Follow

229

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster