Page 215

Lie-Nielsen

No. 71 Router Plane (Closed Mouth) A flat bottom guaranteed.

No. 271 Small Router Plane (Closed Mouth) Perfect for small relief and shallow mortice work. This Lie-Nielsen router plane is an updated version of the Stanley 271. It features a stout 6.35mm wide blade. The closed mouth design of this model offers additional support in front of the blade. This support is an advantage in situations such as cleaning the bottom of a mortice on a narrow workpiece or flattening a hinge recess on a door edge. Approximately 100 x 50mm, weight 240g. Inc.vat Ex.vat Code No.271 Router Plane (Closed Mouth) £79.50 £66.25 504522

No. 271 Small Router Plane (Open Mouth) For a better view. The Lie-Nielsen 271 features a 6.35mm wide blade. The open mouth allows a better view of the blade making it easier to see what’s going on. The square shank of the blade enables it to be used not just front to back but positioned for use side to side, not often used but handy when needed. Approximately 100 x 50mm, weight 240g. Inc.vat Ex.vat Code No.271 Router Plane (Open Mouth) £79.50 £66.25 701266

A router plane is a great tool for working shallow mortices, fitting hinges, inlay, door locks and anywhere that requires an area cut to a precise depth. The Lie-Nielsen No. 71 Router Plane is loosely based on an early Stanley model. The closed throat design is ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. The blade is held solidly in the body in a square broached hole (blades will not fit original Stanley planes). Ductile iron body, 210mm long x 90mm wide x 95mm tall, 9.5mm square blade. Inc.vat Ex.vat Code No. 71 Router Plane (Closed Mouth) £139.00 £115.83 504521

No. 71 Router Plane (Open Mouth) At times easier and quicker than a power tool.

No. 40 1/2 Scrub Plane

This No. 71 Router Plane features a ductile cast iron body, accurately machined and flattened.

Rapid stock removal.

The Lie-Nielsen 71 router plane has micro adjustable depth control and a depth stop. The blade is held solidly in the body in a square broached hole (blades will not fit original Stanleys). The open mouth gives a better view of the blade. The open mouth 71 is excellent for trimming tenons, cleaning dadoes etc. There are certain situations where it is quicker and easier to use the 71 than spend time setting up an electric router (and it’s quiet). 210mm long x 90mm wide x 95mm tall, 9.5mm square blade. Inc.vat Ex.vat Code No.71 Router Plane (Open Mouth) £139.00 £115.83 701265

Traditionally used for heavy roughing cuts, the blade has a 75mm radiused edge. The curvature makes heavier cuts less taxing, rough sawn boards can be brought close to size quickly ready for the fore plane to come into play. The Scrub Plane is excellent for shaping irregular objects, or producing an hand hewn look to a surface. The No. 40.1/2 is supplied with a cast ductile iron body, bronze lever cap and frog and cherry handles. 260mm long body, the blade is 38mm wide x 4.8mm thick with a 75mm radius on the cutting edge. Weight 1.33kg. Inc.vat Ex.vat Code No. 40 1/2 Scrub Plane £163.96 £136.63 200617

No. 40B Butt Mortice Plane Opens the door to fast and precise hinge fitting. The Butt Mortice Plane can help to make the recess for door hinges in a fraction of the time it takes to set up a router and template. Easy to use it will make precise mortices with sharp corners to an accurate, uniform depth. The wide mouth gives a clear view of the work. Complete with instructions. Size 245mm x 38m x 38mm body with a 22mm A2 cryogenically treated blade. Inc.vat Ex.vat Code No. 40B Butt Mortice Plane £109.50 £91.25 421047

Swinging the fence to change from Tongue to Groove

No. 48 Tongue & Groove Plane Single plane cuts both sides of the joint. The Lie-Nielsen T&G Plane is a quietly efficient hand tool. It centres on 19mm stock, leaving a 6.35mm wide tongue. On narrower or wider boards the tongue will be offset but is obviously hidden within the joint. A single forked blade is simple to sharpen and hone. The fine tolerances in machining the frog ensure that the blade is always square on to the base. The fence, fixed to the base at its halfway point, can be rotated and locked. In one position, both sides of the blades are exposed to cut the tongue. Rotating the fence into its other position hides one side of the blade leaving the other exposed to cut the groove. Depth is pre-set by the milled groove in the body casting. The tote and the front knob are cherry wood, the lever cap is brass. Inc.vat Ex.vat Code Overall length 260mm. No. 48 T & G Plane £193.96 £161.63 210954

Free delivery on orders over £30 (UK mainland only) under £30 just £2.95

215

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster