Page 21

Bandsaws Mid sized bandsaw of steel and cast iron construction

Our largest Craft bandsaw for the woodturner or serious home woodworker Upper and lower ceramic side and thrust blade guides, long life and better blade control

Large, rigid, quick locking rip fence, doors fitted with safety switches

Large, rigid, quick locking rip fence, doors fitted with safety switches

Upper and lower ceramic side and thrust blade guides, long life and better blade control

Useful depth of cut - 175mm with 315mm width of cut

Widely spaced table support trunnions, very smooth tilt action

Useful depth of cut - 200mm with 360mm width of cut

Integrated dual port dust extraction, just one connection port

Rigid, welded body construction allows high blade tension for increased accuracy

Widely spaced table support trunnions, very smooth tilt action Substantially made from steel and cast iron construction

Integrated dual port dust extraction, just one connection port

Rigid, welded body construction allows high blade tension for increased accuracy

AVAILABLE TO ORDER AND VIEW IN ALL STORES FROM EARLY FEBRUARY

AC2305B Bandsaw

AVAILABLE TO ORDER AND VIEW IN ALL STORES FROM EARLY FEBRUARY

Extra capacity for the enthusiastic woodworker. The AC2305B is a mid-sized bandsaw in the Craft range. It has many features normally found on larger, more expensive machines. This bandsaw has a welded steel chassis with extra stiffening and bracing. It has a generous cast iron table with a 19mm mitre fence slot.

AC2606B Bandsaw

Big capacities and power for cutting large bowl blanks or general sizing of timber.

Supplied with a steel leg stand with rubber feet and a UK made general purpose blade.

The AC2606B is the largest, most powerful model within our Craft bandsaw range. This is a bandsaw for woodturners and serious home woodworkers needing to cut larger timbers. Strength is of great importance, the welded steel chassis has extra stiffening and bracing. The ground, cast iron table features a standard 19mm mitre slot. For ripping, the fence locks solidly onto the front rail with a cam-action lever. Scales along the front rail provide a guide to cutting width on both sides of the blade. The cutting height is easy to adjust using a rack and pinion mechanism. Large ceramic side and thrust blade guides, offer excellent blade support. Ceramic guides are almost impossible to wear out. Twin interconnected extraction points increase dust control efficiency. These end in a single 100mm outlet for coupling to an extractor. A multi V-drive belt and pulley offers a choice of two speeds. Supplied with a stable steel stand with rubber feet and a UK made general purpose blade.

A wide range of different blades are available to suit any task. Power Voltage Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Width of Cut with Fence Max Cutting Height Table Size Table Height on Stand Table Tilt Wheel Diameter Min Extraction Airflow Required Dust Extraction Outlet Overall L x W x H Weight

A wide range of different blades are available to suit any task. Power Voltage Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Width of Cut with Fence Max Cutting Height Table Size Table Height on Stand Table Tilt Wheel Diameter Min Extraction Airflow Required Dust Extraction Outlet Overall L x W x H Weight

Widely spaced mounting trunnions supporting the cast iron table ensure stability. The rip fence locks solidly with a cam onto the front rail. Twin scales allow the fence to be used either side of the blade. This bandsaw has large ceramic side and thrust blade guides. Ceramic guides offer increased accuracy and are almost impossible to wear out. Once set, they stay set unless you change the width of the blade. A rack and pinion system makes adjusting the upper blade guide height simple. Dust extraction is via two ports for greater efficiency. An interconnecting hose leaves a single 100mm outlet to couple to a suitable extractor. With its powerful induction motor and multi V-belt drive, the AC2305B is quiet and reliable. There are two blade speeds, giving flexibility for many jobs.

AC23205B Bandsaw 230V

750 W 230 V 360 & 720 m/min 2,305 mm (90.3/4”) 6 mm to 16 mm 315 mm 208.5 mm 175 mm 400 x 500mm 1,035 mm 0° - 45° 320 mm 850 m³/hr 100 mm 700 x 890 x 1,623mm 66kg Inc.vat Ex.vat Code £499.96 £416.63 105094

UJK Technology Accessories Bandsaw Buddy Blade Alignment Tool 19mm Mitre Fence

£20.00 £39.96

£16.67 £33.30

101807 104928

AC2606B Bandsaw 230V

1.1 kW 230 V 600 & 840 m/min 2,606 mm (102.3/4”) 6 mm to 25 mm 360 mm 260 mm 200 mm 480 x 550 mm 1,060 mm 0° - 45° 370 mm 1,000 m³/hr 100 mm 980 x 630 x 1,740 mm 85 kg Inc.vat Ex.vat Code £599.95 £499.96 105095

UJK Technology Accessories Bandsaw Buddy Blade Alignment Tool 19mm Mitre Fence

£20.00 £39.96

Call free 0800 371 822 Visit axminster.co.uk Follow

£16.67 £33.30

101807 104928

21

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster