Page 208

Axminster Rider 4 Piece Butt Chisel Set

Now watch the video online! No. 271 Small Router Plane

No. 80 Scraper Plane

Getting in the groove.

Taming wild grain.

This small and compact version of the router plane is ideal for smoothing the bottom of grooves, dadoes and housings. It is also useful for work such as inlaying and cleaning out hinge or lock plate housings. The cutter locks in position with a brass thumb-screw. The throat is fully open on one side allowing a better view when, for example, working a stopped housing. The base size is 105mm x 58mm, supplied with a 6.35mm cutter. The blade is oil quenched, high carbon steel, hardened and tempered to HRC 63, and only requires a little honing before use. Inc.vat Ex.vat Code Router Plane £37.96 £31.63 506573 Blade for No. 271 Small Router Plane £5.99 £4.99 506486

The Rider No. 80 cabinet scraper produces a clean even finish and is ideal when used to smooth difficult grain over large areas. Tightening the knob, behind the blade, causes a slight bow in the blade. This increases the bite and hence the thickness of shaving. The body of the No. 80 is a fine, grey, iron casting with a flat, machined base. The base measures 90mm x 68mm, the blade is 70mm wide. Checked for consistent quality at Axminster and supplied in an attractive, foam lined, sturdy black box with an instruction booklet. Inc.vat Ex.vat Code Scraper Plane £24.96 £20.80 506574 Blade for No. 80 Scraper Plane £5.95 £4.96 506548

Perfect for fine trimming and final fitting. The fine-grained, chrome manganese steel blades are hardened and tempered to 59 HRC, finely ground and finished with a 25° bevel. The handles are smooth hornbeam, with a light oil finish. The pear shaped handle has a small flat on the back to prevent the chisel rolling off the bench. A polished stainless steel ferrule and a shock absorbing leather washer complete the handle. The blades are approximately 65mm long with the overall length 175mm. The set comprises 4 chisels: 6mm, 12mm, 20mm and 25mm. Inc.vat Ex.vat Code Butt Chisel Set 6-25mm £64.96 £54.13 103294 6mm £11.95 £9.96 103314 12mm £11.95 £9.96 103315 20mm £12.50 £10.42 103316 25mm £13.99 £11.66 103317

Mortice Chisel Mortice chisels fit for a tenon. Rider mortice chisels are robust, yet incorporate refinements for making them easier to use for better results. A slight taper in the cross section of the blade improves cutting performance, giving just enough clearance even in a deep mortice to prevent the chisel binding in the cut. The handle is hornbeam, sanded smooth with a light oil finish. A steel hoop protects the handle from mallet blows, whilst a small button of timber protrudes above the hoop to minimise damage to the mallet head. The handle ends in a polished stainless steel ferrule with a shock absorbing leather washer between the handle and the chisel’s bolster. The forged blade is Cr-Mn steel and is heat treated to 59 HRC. The steel’s fine grain ensures a keen, long lasting edge. The bevel only requires honing before use. The blades are approximately 140mm long with the overall length 305mm. European made. Inc.vat Ex.vat Code 4mm £16.99 £14.16 103309 6mm £16.99 £14.16 103310 8mm £16.99 £14.16 103311 10mm £16.99 £14.16 103312 12mm £16.99 £14.16 103313

Carpenter’s Mallet - 110mm This classic carpenter’s tool made from straight-grained, selected beech wood won’t damage chisel handles. Beech wood’s resilience, density and resistance to splitting make it the perfect material. The angled striking faces of the Rider mallet ensure each blow is a square on to target. The handle and head connection is a tapered mortice, in use; swinging the mallet automatically tightens the head on the handle. The Rider mallet has a generous handle making it comfortable to hold and use. Striking faces 50mm x 80mm, handle length 325mm Inc.vat Ex.vat Code Carpenters Mallet - 110mm £9.96 £8.30 105402

Corner Chisel Rounded corners? Not anymore. The Rider Corner Chisel is used for trimming and final squaring. The hardened and tempered 10mm square blade has a forged tang and bolster with a ground bevel, CNC milling guarantees a 90° cutting angle. Use the Rider corner chisel to clean the corners of mortices and to trim hinge recesses after using a router. It is useful as a marking out tool, a light tap provides a square cut as a guide for joint corners. In line with the other chisels in the Rider range, the handle is oiled hornbeam and ends in a polished stainless steel ferrule with a shock absorbing leather washer. The blade is approximately 120mm long with the overall length 260mm. European made. Inc.vat Ex.vat Code 10mm £28.99 £24.16 103318

208

6-Pocket Chisel Roll Protect your investment. High quality, soft leather, double stitched throughout. The top and tail pocket design offers greater protection and makes a for a neat package when rolled up. Each pocket is 125mm deep by 60mm wide. A leather strap and a double D-ring secures the roll. The overall lay flat size is 325mm wide by 350mm long. Inc.vat Ex.vat Code 6-Pocket Chisel Roll £26.99 £22.49 104278

Visit our stores for personal advice before buying - see inside back cover

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster