Page 153

UJK Technology T-Track A useful selection of aluminium track which can be utilised for all manner of routing jigs, clamps and devices.

Dovetailed Mitre Slot Track

Universal T-Track

A standard mitre slot track but with a unique 14° dovetail shaped section which offers extra security for attaching the track. The external measurements overall are 915mm(36”) long, 31 x 12.7mm deep and the slot is 19 x 9.7mm deep. These tracks would be useful if making up your own router table or other applications where a mitre fence is used. Inc.vat Dovetailed Mitre Track 915mm £16.80 14º Dovetail Router Cutter 1/4”(6.35mm) £9.60

Ex.vat £14.00 £8.00

Code 502713 666015

The external measurements are 19 x 9.5mm deep, the slot is 8.9 x 6.4mm deep and the T-section is 13.6mm wide. Available in 610mm(24”) or 915mm(36”) lengths. Inc.vat Ex.vat Code T-Track 610mm £9.48 £7.90 502716 T-Track 915mm £12.46 £10.38 502717 610mm T-Track & Hold Down Clamp £13.96 £11.63 717640 915mm T-Track & Hold Down Clamp £15.97 £13.31 717641

Dovetailed T-Track The unique 14° dovetail shaped section makes the track extremely useful for jig making, especially if a clamping action is pulling against the track. The external measurements overall are 915mm(36”) long, 23 x 9.5mm deep, the slot is 8.9 x 7mm deep and the T-section is 13.6mm wide. Inc.vat Ex.vat Code Dovetailed T-Track 915mm £17.98 £14.98 502712 14º Dovetail Router Cutter 1/4”(6.35mm) £9.60 £8.00 666015

L/H Self Adhesive Steel Tape 3M Metric Self-adhesive measuring tapes in metric.

Mitre Slot Bar Overall dimensions are 457 x 9.5 x 19mm wide. There are 4 grub screws spaced equally along the length of the bar to fine tune the sliding fit of the bar in your machine table slot. Three M6 x 1.0 threaded holes are spaced equidistantly along the length to accommodate any jigs and fixtures that you wish to attach. Inc.vat Ex.vat Code Mitre Slot Bar 457mm £18.49 £15.41 502714

Each tape is 13.5mm wide and comes in two parts: zero to 1.6m (0 to 63”) and 1.5m to 3m (58” to 118”), which makes it easier to handle and set up. The scales read in centimetres with millimetre divisions. Be sure to choose the correct tape orientation: left-to-right reading to go on the right side of your saw blade etc. or right-to-left reading for the left side of your saw blade etc. Inc.vat Ex.vat Code L/H Self Adhesive Steel Tape 3M Metric £9.95 £8.29 105388 R/H Self Adhesive Steel Tape 3M Metric £9.95 £8.29 105389

T-Slot Bolts (Pkt 10) Fits directly in the UJK Track and Stop T-Track, the UJK Universal T-Track as well as the T-Track on the UJK Router Fence. These all-metric M6 threaded T-slot bolts have 18 x 12mm heads and are zinc plated. The M6 thread is available in 3 lengths: 25mm, 50mm and 75mm. Inc.vat Ex.vat Code T-Slot Bolts M6 x 25mm (Pkt 10) £3.14 £2.62 103410 T-Slot Bolts M6 x 50mm (Pkt 10) £3.55 £2.96 103411 T-Slot Bolts M6 x 75mm (Pkt 10) £3.96 £3.30 103412

Double-Sided Tape Bonds to most materials even rough surfaces.

Axminster 148 Piece Jig Making Set

Hold Down Clamp

If you need to make up jigs for routing or sawing operations, this is a potential kit for you. This is a great set that covers a huge variety of applications and contains a comprehensive selection of 1/4” UNC knobs and fittings, both male and female. Imperial kit includes 10 x 90mm tee bolts, 10 x 65mm tee bolts, 20 x 40mm tee bolts, 20 x 25mm tee bolts, 26 female knobs in various sizes, 10 male knobs with 25mm threaded rod, 20 x 16mm diameter washers with 6mm hole, 16 x screw in threaded inserts and 16 x spiked nut inserts. A sturdy case keeps everything together for convenience. A metric M6 jig making set (103409) is also available. Inc.vat Ex.vat Code Jig Hardware Set £45.85 £38.21 950114 Jig Making Set - 119 Piece Metric £41.50 £34.58 103409

Secure your work easily and safely. These hold down clamps are designed to be used with the standard UJK Technology T-tracks or the Dovetailed T-track but can also be used without. The star knob allows you to secure your work easily. Clamping width of 30mm. Used with the UJK Technology T-Track gives a thickness capacity of up to 50mm. Excellent for making jigs. Inc.vat Ex.vat Code Medium Hold Down Clamp £9.49 £7.91 502715

Threaded Pronged ‘T’ Nuts The simplest items are usually the most useful. Threaded pronged ‘T’ nuts are simple but useful items for making accurate and effective jigs in the home or workshop. To insert drill a hole to size: 8mm for the M6, 10mm for the M8, 12mm for the M10 and gently tap home. Supplied in packs of 10. Inc.vat Ex.vat Code M6 Nuts (8mm O/D) (Pkt 10) £2.24 £1.87 800402 M8 Nuts (10mm O/D) (Pkt 10) £2.45 £2.04 800403 M10 Nuts (12mm O/D) (Pkt 10) £2.90 £2.42 800401

Manufactured by tesa, the UJK Technology double-sided tape is quick and easy to apply. It will bond to most materials like wood, metal and plastics plus paint, varnish and similar surfaces. It is resistant to extreme temperatures, chemicals and solvents, humidity and UV radiation. The thick layer of adhesive bonds extremely well, even to rough surfaces. It has a very high initial tack and bond, and a high shear resistance. This double-sided tape, which you can tear by hand, consists of a silicone coated paper carrier and synthetic rubber adhesive. Double-sided tape is a truly useful item to have in the workshop or in the home. Size: 19mm wide x 50m long. Inc.vat Ex.vat Code Double-Sided Tape £5.50 £4.58 102795

M6 Threaded Inserts (Pkt 10) For making custom jigs and an effective solution for repairing flat-pack furniture. M6 threaded inserts for wood, MDF and other manmade boards. The body of the insert is 12mm long with a 10mm overall diameter. One end of the insert has a slot to accommodate a wide-bladed screwdriver for insertion. The M6 insert requires an 8.5mm or 9mm pilot hole; the optimum diameter is dependent on the hardness of the material you are using. We found 9mm worked best in MDF. Inc.vat Ex.vat Code M6 Threaded Inserts (Pkt 10) £1.60 £1.33 103408

Universal Fence Clamps (Pair)

Threaded Metal Inserts for Wood

Clever clamps for sub-fences.

For making accurate & useful jigs for routing or sawing operations.

Simple and effective fastenings that help make accurate routing or drilling jigs.

Threaded metal inserts are simple but useful items for making accurate and effective jigs in the home or workshop. The M6 insert requires a 8mm hole, the M8 a 10mm hole. Use a hex key to turn the M6 into the hole, the M8 simply taps into place. Sold in packs of 10. Inc.vat Ex.vat Code M6 Inserts (8mm Hole) (Pkt 10) £2.75 £2.29 510240 M8 Inserts (10mm Hole) (Pkt 10) £4.39 £3.66 510241

These M6 pronged T-nuts are an easy-to-fix, low cost anchor. They are useful for jig making or as concealed fasteners on items that need erection and disassembly on occasion. The thread length is 15mm, giving you plenty of holding power. To install, drill an 8mm hole and gently tap home to seat the prongs. Zinc plated against corrosion and supplied in packs of 10. Inc.vat Ex.vat Code T Nuts M6 (Pkt 10) £1.50 £1.25 103413

A very useful pair of clamps for attaching a wooden subfence to your circular saw or bandsaw. The clever design allows you to drill an 8.5mm hole in the top of your fence and the clamp holds the fence securely in place leaving the face free from obstruction. The unique clamping action could be useful for many other jig type applications where the top surface needs to be free from obstructions. Inc.vat Ex.vat Code Fence Clamps (Pair) £14.95 £12.46 502711

T-Nuts M6 (Pkt 10)

Axminster No.1 for advice, range and service! Order now at axminster.co.uk

153

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster