Page 126

Cam & Wedge Clamping Set Holds workpieces without any surface obstruction. The UJK Technology Cam & Wedge set is an exceptionally useful accessory for a Multifunction table. It allows you to clamp a workpiece leaving its top free of any obstruction for routing, sanding, carving etc. The principle is as old as the pyramids and just as effective now as it was then. The UJK Technology Cam & Wedge set offers complete unbudgeability. The set comprises 3 stainless steel guide pups, a surface cam clamp, and CNC machined HDF Valchromat, backstop, 2 wedges and spacer block. The backstop has 3 dog holes; 2 spaced at 96mm for lateral or longitudinal positioning and the third for diagonal placement. The surface cam clamp also features screw holes allowing its use on a plain board. Depending on the width or thickness of your workpiece, you may need to use one or both wedges and possibly the spacer block. All parts are available separately. Inc.vat Ex.vat Code Cam & Wedge Clamping Set £24.95 £20.79 105369

Surface Cam Clamps (Pair) For secure clamping on benchtops, work boards or self-made jigs.

Back Stop A useful stop or assembly aid.

Wedges (Pkt 2) Handy in many workholding situations. These Wedges are part of the UJK Technology Cam and Wedge set available separately. They have great potential in many work holding situations. The wedges taper from 32mm to 27mm over a length of 200mm. They are CNC cut from thick HDF Valchromat. This material is very durable, easily tough enough to withstand gentle tapping with a hammer to lock the wedge. Using two wedges acting against each other ensures the applied force is at 90° to the edge of the workpiece. Inc.vat Ex.vat Code Wedge £4.96 £4.13 105364

This Backstop is part of the UJK Technology Cam and Wedge set but also available separately. The backstop has three dog holes; two spaced at 96mm for lateral or longitudinal positioning on a Multifunction table and a third allowing diagonal placement. The UJK Guide Pups with their 12mm projection are the ideal companions. On its own, it makes a useful planing stop etc. In conjunction with a second backstop paced at 90° or diagonally at 45° it can form a useful assembly jig. It is CNC machined from durable, thick HDF Valchromat; 200mm long by 30mm wide. Inc.vat Ex.vat Code Back Stop £4.96 £4.13 105367

Based on the successful UJK Surface Cam Duck Clamp, this particular version has a 20mm dog hole slightly offset to create the cam action. Designed originally for use on a Multifunction table with 20mm dog holes, there is no reason why you cannot use them on any bench with the correct size dog hole. The UJK Guide Pups with their low profile are the ideal companions. The design of these cam clamps solves the problem of holding an item on a flat surface using only side pressure. CNC machined from 12mm thick solid compact phenolic laminate, these low profile cam clamps will last a very long time. The additional holes allow a screw fixing for extra security. Use these Surface Cam Clamps for planing, scraping, carving, sanding and for any irregular shaped object. Supplied as a pack of 2. Inc.vat Ex.vat Code Surface Cam Clamps (Pair) £8.95 £7.46 105325 12mm Guide Pup £9.95 £8.29 105311

Assembly Square Used in conjunction with a Multifunction Table, the Assembly Square is a very effective third or even fourth hand. When it comes to putting a box or carcass together, this is a truly useful accessory. It is an L-shaped section of CNC machined, thick HDF Valchromat with 360mm long legs. The legs are exactly at 90° and feature a group of three 20mm dog holes. These holes align diagonally with the multifunction table dog holes. Any 20mm guide dog will work but the 12mm UJK Guide Pups are the ideal for this purpose. Once in place, the Assembly Square forms a reference for a fast, spoton and accurate way to set up a guide rail for 45° mitre cuts. The square really comes into its own as an assembly aid for box, frame or carcass construction. Having cut all the pieces with the utmost precision, the Assembly Square ensures the parts go together at right angles. The arms have cutouts for clamps and holes for spigot clamps with which to hold two pieces whilst gluing, screwing, fixing etc. Positioned in place on a Multifunction tabletop with guide pups, the addition of a couple of UJK cam clamps can lock both parts against the square whilst fixing. You can use a second Assembly Square to secure the top. Inc.vat Ex.vat Code Assembly Square £21.70 £18.08 105280 Fence Clamps (Pair) £14.95 £12.46 502711

126

Find the right tool for the job from over 15,000 products @ axminster.co.uk

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster