Page 103

Axminster Engineering Milling and Accessories Touchpad control and tapping facility

AVAILABLE TO VIEW

IN ALL STORES Fine and coarse downfeed for milling or drilling

SX2.7 Mill Drill Let’s talk about SX What you get with SX version is a powerful, high torque brushless motor, controlled by a touchpad. This has much more torque especially at the lower spindle speed, is quieter and, because of the advanced control system, offers the useful tapping function. The SX2.7 is a more advanced machine, with better control and versatility. Like the The X2.7 mill it has the same modern design and is both solid, highly accurate and easy to control. The dovetailed back column aids accuracy and rigidity, hugely important when milling. A generous table size has a fully ground surface and slides on adjustable jib strips. The headstock has a digital read-out of the spindle extension for accurate blind hole drilling or tool setting. The downfeed has a fine feed system for milling, plus a direct feed for drilling. An interlocked swivelling guard is fitted. The SX2.7 is a more advanced machine, with better control and versatility. Power 750 W Voltage 230 V Spindle Speed 100 - 2,000 rpm Spindle Taper 3 MT Nose of Spindle to Table (Max) 370 mm Drilling Capacity 20 mm Longitudinal Table Movement 395 mm Lateral Table Movement 190 mm Throat 190 mm Table Size 595 mm x 140 mm Overall L x W x H 725 mm x 620 mm x 880 mm Weight 101 kg

Variable spindle speed with reverse, digital spindle speed read-out

All cast iron construction with dovetailed slideways on the column

Generously sized table with adjustable bevelled wedge slideways

Inc.vat Ex.vat Code £1,449.96 £1,208.30 101600

SX2.7 Mill Drill 230V

Axminster Tailstock for 200mm Rotary Table

Accu-Lock Machine Vice An excellent general purpose low profile milling vice with hardened and ground 100mm steel jaws. The vice is carried on a swivel base but, may also be mounted directly onto the machine table if desired. The jaw plates open to 125mm and can be fitted at either end of both the static and moving jaws, providing variation for clamping width capacity. A long tightening bar is provided, ensuring secure clamping. Inc.vat Ex.vat Code Machine Vice 125mm £119.95 £99.96 953005

A tailstock designed for use with a rotary table. The centre height is variable between 103 - 166mm. It can also be tilted to accommodate various machining operations. The centre itself can be rotated within the housing to present a different angle to the workpiece. The base size is 185 x 140mm and there are 15mm fastening slots in each end to secure it to the machine table. Inc.vat Ex.vat Code Tailstock for 200mm Rotary Table £59.99 £49.99 211558

Axminster 200mm Dividing Plates

12mm T Slot Clamp Kit for Mills see page 101 12mm Clamp Kit

Inc.vat £49.96

Ex.vat £41.63

Code 951675

When used in conjunction with a rotary table these plates help to prevent errors during the repetitive adjustments required in indexing work. Ideal for cutting gears, machining polygonal spindles, drilling holes equal distance around a circle etc on a vertical mill. Indexing of 2-100 divisions can be carried out easily and accurately. Simply fitted in minutes, this accessory will greatly enhance the use of the rotary table. Inc.vat Ex.vat Code Dividing Plates 200mm £39.95 £33.29 211557

Axminster 200mm Rotary Table A rotary table can be used to make arcs, circles and for indexing, where a workpiece must be rotated an exact amount between operations. You can make gears on a milling machine using a rotary table, using optional dividing plates makes indexing with a rotary table easier. This is a 200mm rotary table; with a totally ground finish which provides smooth operation and precision in use. Suitable for the larger milling machine commonly used in production, this table features a 3MT centre sleeve, 4 X M12 T-slots and a 90:1 worm ratio. The hardened and ground worm gives 4° per rotation of the handwheel, the dial is scaled to 1 minute and the vernier scale is calibrated to 10 seconds. Incorporated is a quick release mechanism for hand indexing. The work table is graduated to a full 360°. The centre height when mounted vertically is 135mm. Although factory set, there is provision to adjust both the meshing of the worm gears and the axial adjustment of the worm gears to set the rotary table as you would wish. Inc.vat Ex.vat Code Rotary Table 200mm £211.00 £175.83 211556

Free delivery on orders over £30 (UK mainland only) under £30 just £2.95

103

Profile for Axminster Tools & Machinery

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Axminster Tools & Machinery Catalogue 2018/19  

Back by popular demand, the ALL NEW Axminster Tools & Machinery 2018/19 Catalogue is now available! Our new look catalogue concentrates sol...

Profile for axminster