VERITAS
Tapered Snug Plug Cutters When nothing less than a perfect fit will do.
Standard plug
Sometimes when plugging holes, no matter how carefully drilled, the holes finish up slightly oversize for the plug, especially in soft woods. These cabinetmaker’s snug plug cutters overcome this by cutting a slightly tapered plug. The first 3mm of the plug is the diameter stated whilst the remaining length is then flared out at an angle of 3°. Just tap the plug into place until you meet resistance then cut off the excess. These plug cutters have four cutting edges giving a smooth-sided plug which fits perfectly every time. For best results use in a pillar drill or power drill stand.
Snug plug!
Regular plug sides are rough because of fibre tearing.
Tapered plug sides are smooth since they are shaved to size while being cut.
Set of 3 Imperial Cutters Set of 3 Metric Cutters 3/8” Cutter 1/2” Cutter 6mm Cutter 8mm Cutter 10mm Cutter
Inc.vat
Ex.vat
£42.48 £41.98 £15.98 £16.78 £15.58 £15.68 £15.98
£35.40 £34.98 £13.32 £13.98 £12.98 £13.07 £13.32
Code 510262 510269 510260 510261 510263 510264 510265
Small Journeyman’s Brass Mallet When you need a delicate touch. This small mallet, with a 340g (12oz), 32mm diameter head is a great help when carving fine detail. Used for work that requires more finesse than power, this mallet fits the bill perfectly. With a solid brass head and a walnut handle, this is an elegant and effective tool. The mallet is 150mm long overall. Made in Canada. Small Journeyman’s Brass Mallet
Inc.vat
Ex.vat
£30.48
£25.40 107007
Code
Shooting Sander Large Journeyman’s Brass Mallet Power to your elbow This journeyman’s carving mallet has a 510g (18oz) head, 41mm in diameter. This brass headed mallet allows you to strike a carving tool with a measured force when carving or sculpting. The solid brass head has a blind threaded connection so you can use the top as a striking surface with the same feel and force as the sides. 150mm long overall. Made in Canada. Large Journeyman’s Brass Mallet
Inc.vat
Ex.vat
£37.18
£30.98 107008
Code
Practicality and style. Made from 100% cotton canvas, this durable apron has crossover straps for comfort. At 863mm long and 710mm wide, the bib provides ample front and side coverage. The shoulder straps are easy to adjust with low-profile, unobtrusive clips, and the adjustable waistband has a quick-release buckle. A pocket on the chest has compartments for pencils, pads, small rules, etc. Below it there are two 200 x 200mm pockets with a top flap that keeps sawdust and wood chips out, plus two larger 355mm x 200mm side-opening pockets to hold small tools. Waist loops situated on either side of the pockets will hold a hammer, a tape measure etc. Canvas Apron
Turn a mechanic’s vice into a metal bender. This metal bender allows anyone to form a metal part with control. The product has two parts: the male die and the V-block. Both are made of high strength malleable cast iron, capable of bending up to 3.2mm mild steel. Each piece (about 75mm long by 28mm wide) clamps itself against a vice jaw using embedded rare earth magnets. The main purpose of the metal bender is to make bends up to 90° for such things as angle brackets and sheet metal parts. A versatile and inexpensive tool for any workshop.
282 248-291_Hand Tools_2020.indd 282
Inc.vat
Ex.vat
£48.18
£40.15 504583
Code
This method reduces the risk of splintering or chipping on thin material, difficult grain, or even lacquered or painted mouldings. The wooden knob is angled to allow you to apply equal pressure to the sole and face. It can also be positioned at any point along the length of the sander. Compatible with any shopmade shooting board sized for the shooting plane, each sander has a 6mm wide lip along the bottom of the face that keeps the sander from widening the shooting board track. Supplied with six 225mm long, 30mm wide strips of PSA-backed aluminium oxide sandpaper; two each of 120g, 180g and 220g. Shooting Sander 120g (Pkt 12) 220g (Pkt 12) 180g (Pkt 12)
Inc.vat
Ex.vat
£40.78 £5.78 £5.78 £5.78
£33.98 £4.82 £4.82 £4.82
Code 506423 506424 506426 506425
Tapered Tenon Cutters
Metal Bender
Metal Bender
Sand stock square and to size.
Canvas Apron
Inc.vat
Ex.vat
£19.48
£16.23 476080
Code
These tenon cutters put tapered tenons on the tips of turnings, dowels or furniture components to fit into tapered holes; for example, legs and spindles on a Windsor chair. Use the cutter like a handheld pencil sharpener; you either rotate the workpiece or rotate the tool on the workpiece. Works equally well in soft, green or hard woods.The size given for each cutter is the minimum tenon diameter it will cut; the maximum is 1/2” greater over a total tenon length of 63mm (2.1/2”). The 3/8”, 1/2” and 5/8” sizes cover most tenoning requirements for typical chair making. 3/8” Tapered Tenon Cutter 1/2” Tapered Tenon Cutter 5/8” Tapered Tenon Cutter Replacement Blade
Inc.vat
Ex.vat
£42.88 £42.88 £42.88 £14.58
£35.73 £35.73 £35.73 £12.15
Code 475954 475956 475958 477406
There’s much more online - see axminstertools.com for our full range
18/08/2020 12:22