Page 1

EXC LU S IVE

AU TOMOT I V E

PR OD UCT S

w w w. a u t o i n p a r t s . c o m


2

IMPORTANT INFORMATION - This is a Trade Catalogue PLEASE READ THIS BEFORE SELLING OR SUPPLYING ANY OF OUR PARTS AND ACCESSORIES

TO ORDER

Hours of Business 9am - 5.30pm Monday to Thursday 9am - 5.00pm Friday

Please fax all orders on: 01525 382718 or email: sales@autoinparts.com

Contact Details Tel: 01525 382713 Fax: 01525 382718 Email: sales@autoinparts.com Web: www.autoinparts.com

Address Auto Inparts Ltd Unit L2, Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Beds, LU7 4UH, UK

GENERAL INFORMATION

INSTALLATION

At the time of producing this catalogue we made every effort to ensure that all the information contained was accurate and correct. However due to the large amount of data and constant changing and updating of vehicle makes, models and specifications, Auto Inparts cannot guarantee or be held responsible for the applications recommended or listed within this catalogue, or for any misapplication or misuse of the information. The information listed in this catalogue is only a guide.

We recommend that a qualified person/mechanic carries out the installation of all products and ensures that safety is of the utmost priority.

Auto Inparts Ltd reserves the right to make changes to specifications and designs without any prior notice or incurring responsibility.

After fitting/installing any parts please make sure that they are safely and legally installed. Please make sure that they will not damage the vehicle and that they will not cause any danger to anybody travelling in the car or pedestrians. We recommend that you periodically check any parts that have been fitted to your vehicle to ensure that they are in good condition and in working order.

If you spot any mistakes would you please let us know so we can continue to update and improve our product information.

Please note ‘universal fitment’ means that the product is not designed to fit any specific vehicle but can be fitted to most vehicles providing a bit of common sense and initiative is used.

PRODUCT AVAILABILITY

If you have any doubts about our products you should seek advice from:

Due to the vast range and technical nature of some of the parts contained in this catalogue we do not always have all parts in stock. It is a good idea to check with us first to make sure that parts are available.

• A qualified person/mechanic • Contact Auto Inparts Limited All products are fitted and used at the purchaser’s own risk. We do not accept responsibility for improper use, improper installation, illegal installation or unsafe installation. Any products used for motorsport are supplied on the understanding that the purchaser and end user assumes all risks when fitting them to a vehicle, modifying them to fit a vehicle, or modifying a vehicle to make the parts fit.

PRODUCT GUARANTEE All products are guaranteed for defects in material and workmanship only. Guarantee is void if the products are damaged by an accident, unreasonable use, neglect, misuse, abuse, improper installation or other causes not arising out of defects in materials and workmanship. All products are fitted and used at the purchaser’s own risk. We do not accept responsibility for improper use, improper installation, illegal installation or unsafe installation. Please note the use of acidic and alkaline wheel cleaners that aggressively attack the coating of the wheel locks, wheel fixings or wheel accessories will constitute as misuse. If you have a warranty issue the parts in question will need to be returned for evaluation before any claim is considered or accepted. You must also provide proof of purchase.

Copyright © 2017 Automobile Inparts Ltd. This document is the confidential and proprietary information of Automobile Inparts Ltd and may not be disseminated or copied without the express written permission of Automobile Inparts Ltd.


TM

PRO CLASS DETAILING & VALETING

This advanced range of essential car detailing and valeting products utilises the very latest chemistry techniques with a combination of the finest natural and synthetic waxes, polymers, resins and hydrophobic coatings.

Pro Class Ultimate Shampoo and Wax

INFUSED SHAMPOO CLEANS AND WAXES ALL-IN-ONE

Powerful cleaning agents easily remove dirt, road grime and traffic film, while at the same time enhancing any protective wax layer already applied to the vehicle surface. This leaves a super hydrophobic wax layer which rapidly drives away water from surfaces, reducing drying times and virtually eliminating water spotting. The pH neutral formula is infused with a blend of high concentrate synthetic waxes to ensure that the vehicle surface is enhanced after using this product, delivering a clean brilliant superlative high gloss reflective finish.

BL F AC RE SC KB SH EN ER T RY

MANUFACTURED IN THE UK

The ultimate pH neutral car shampoo and wax enhancer that cares for your vehicle’s paintwork.

• RICH FOAM SUDS REMOVE DIRT, ROAD GRIME AND TRAFFIC FILM

• ENHANCES WAXED SURFACE WHILE YOU WASH - LEAVING A SPOT FREE FINISH

• PH NEUTRAL FORMULA IS SAFE TO USE ON ANY SURFACE

• ALSO SUITABLE FOR USE ON RUBBER, PLASTIC & VINYL Part No ER00149

Probably the most prominent and noticeable parts of any car are its wheels. They are constantly exposed to dirt, grit, road grime, road salt and a heavy build-up of brake dust, all of which combine to corrode the surface of the alloy wheel causing irreversible damage. This alloy wheel cleaner quickly and effectively breaks down and cuts through harmful contaminants on contact due to its unique powerful gel formula which takes the hard work out of cleaning your alloy wheels!

EFFECTIVELY REMOVES BUILT-UP BRAKE DUST & DIRT

FR CI AG TR RA US NC E

MANUFACTURED IN THE UK

Pro Class Wheel Cleaner

Description Pro Class Ultimate Shampoo and Wax - 500ml

• SEALS PAINTWORK SURFACE AND HELPS

PROTECT AGAINST ENVIRONMENTAL FALLOUT

• POWERFUL GEL FORMULA QUICKLY BREAKS DOWN BRAKE DUST AND ROAD GRIME

1 SPRAY ON

• A QUICK AND EFFICIENT SOLUTION FOR

2 LEAVE FOR 2 TO 3 MINUTES 3 RINSE OFF. JOB DONE!

L A U D ION ACTin 1 2

‘LIKE NEW’ WHEELS

Part No ER00148

Description Pro Class Wheel Cleaner - 500ml

T FASG GEL IN ULA T C A RM FO

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

3


Detailing and Valeting

Pro Class Instant Detailer

1

SPRAY

2

WIPE

3

SHINE

MANUFACTURED IN THE UK

This dual action instant detailer is ideal for use in between washes to maintain that ‘just valeted’ look. It is perfect for removing those annoying every day blemishes and marks that just seem to appear on your paintwork out of nowhere. Quickly and easily removes fingerprints, water spots and a light covering of general road grime, dirt & dust from paintwork, plastic trim and glass, while at the same time adding a protective layer of wax to your vehicle’s bodywork, leaving a high gloss finish with no residue marks. Can be used as a surface lubricant in conjunction with the E-TECH Clay Bar when decontaminating paintwork surfaces. (ER00155)

MANUFACTURED IN THE UK

Pro Class Hi-Res Polish A unique blend of natural & synthetic waxes, resins and diminishing micro-abrasives, all combining to create a highly advanced polish that gently removes paint surface blemishes, swirl marks and holograms. At the same time coating the surface with a high resolution resin wax layer. Regular application will remove any upper layer oxidisation to add depth and reflectivity to your paintwork. Advanced resins in the formulation reduce the visual impact of paint imperfections and improve clarity for the ultimate high gloss finish. This versatile formula has been developed to work on both old and new paintwork including metallic, clear coat and water based finishes making it suitable for vehicles of all ages and colours.

• SIMPLY SPRAY ON AND ‘BUFF OFF’ FOR AN INSTANT SHINE

• CAN BE APPLIED TO WET OR DRY SURFACES • CAN BE USED ON PAINTWORK, PLASTIC TRIM

AND GLASS • LIFTS & SUSPENDS SURFACE DIRT FOR SAFE REMOVAL

• PRODUCES AN INSTANT HIGH GLOSS SHINE LEAVING ZERO RESIDUE

Part No ER00150

CAN BE SENT BY ROYAL MAIL

Description Pro Class Instant Detailer - 500ml

H G I H SS GLOISH FIN

FOR A HI-RESOLUTION FLAWLESS REFLECTIVE FINISH

• A TECHNICALLY ADVANCED POLISH FOR THE ULTIMATE HIGH GLOSS FINISH

• RESTORES AND REVIVES PAINTWORK OF ANY AGE OR COLOUR

• QUICK AND EASY TO APPLY AND BUFF OFF FOR OUTSTANDING RESULTS

• NON MARKING ON PLASTIC, RUBBER & VINYL • PROFESSIONAL PAINT & BODYSHOP APPROVED Part No ER00152

Pro Class Carnauba Wax

CAN BE SENT BY ROYAL MAIL

Description Pro Class Hi-Res Polish - 500ml

P DEESS GLOINE SH

OUTSTANDING REFLECTION & FORTIFIED PROTECTION

A fabulous wax which lasts up to 50% longer than conventional waxes.

MANUFACTURED IN THE UK

4

It is so easy to use and produces a brilliant deep gloss shine on any coloured paintwork from any era. Specially formulated using pure Brazilian Carnauba Wax and a blend of synthetic waxes. Together they combine to create a long lasting advanced hydrophobic layer which helps protect your paintwork surface from damaging traffic film, weathering, fallout and environmental pollutants.

• LEAVES A SUPER HYDROPHOBIC BARRIER

Due to the ultra-silky smooth nature of this wax you can apply it as often as you like to maintain a brilliant high gloss finish.

WHICH WATER JUST BEADS OFF!

• SEALS PAINTWORK SURFACE AND HELPS

PROTECT AGAINST ENVIRONMENTAL FALLOUT PREVENTING DIRT, DUST AND GENERAL ROAD GRIME ADHERING TO PAINTWORK

• NON-MARKING ON PLASTIC, RUBBER & VINYL • QUICK AND EASY TO APPLY AND BUFF OFF • CREATES A MICRO PROTECTIVE BARRIER Part No ER00160

CAN BE SENT BY ROYAL MAIL

Description Pro Class Carnauba Wax - 500ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

ED IC C N A B ADVROPHOA L HYDORMU F


Detailing and Valeting

5

Pro Class Tyre Detailing Gel

PRODUCES A ‘LIKE NEW’ HIGH GLOSS FINISH AFTER

The high concentrate formula produces a long lasting high gloss protective layer to the tyre side wall surface, while at the same time providing a super hydrophobic barrier that water beads off and dirt and road grime will not stick to.

• QUICK AND EASY TO APPLY LEAVING

Specially developed to revitalise any type of tyre from any era.

• REVITALISES AND ENHANCES THE APPEARANCE

Ideal for use on cars, vans, trucks, motorhomes and caravans.

BEFORE A NON-GREASY FINISH

OF ANY TYRE SIDE WALL

• ‘NON-FLING’ GEL COMPOSITION PREVENTS MARKING TO SURROUNDING BODYWORK

• LONG LASTING GEL FORMULA ALLOWS FOR PRECISE APPLICATION

Part No ER00153

Excellent cleaning properties: lifts dirt, dust and grime to restore a ‘like new’ factory finish. Suitable for cleaning all vehicle interiors, from vintage or classic through to modern day supercars.

• A NON-GREASY, NON-SHINY AND NON-SLIP FORMULA

• PERFECT FOR HIGH CONTACT AREAS:

STEERING WHEELS, GEAR KNOBS, SWITCHGEAR AND HANDLES

• LIFTS & SUSPENDS SURFACE DIRT FOR SAFE REMOVAL

• GENTLE NON-AGGRESSIVE SOLVENT-FREE

FORMULA IDEAL FOR DELICATE SURFACES

FABRIC SAFE Can also be used on fabric coverings such as seats, carpets, mats, door cards and headlinings.

Part No ER00151

Pro Class Plastic Restorer MANUFACTURED IN THE UK

INGO N A CLE H ZERE WITESIDU R

ES SC H C EN LE T AN

Advances in chemistry techniques have allowed the development of this smart, powerful, yet gentle modern interior cleaner that works effectively on all types of surfaces such as: •Carbon Fibre •Lacquered •Painted •Veneered •Piano Black •Brushed Alloy •Wood •Plastic •Polyurethane •Vinyl •Leather

FOR AN ORIGINAL ‘LIKE NEW’ CLEAN FACTORY FINISH

SI L FR ICO EE NE

MANUFACTURED IN THE UK

Pro Class Interior Detailer

CAN BE SENT BY ROYAL MAIL

Description Pro Class Tyre Detailing Gel - 500ml

H HIGITION IN DEFRMULA FO

FR

MANUFACTURED IN THE UK

If you want to maintain a ‘like-new’ look to your tyres this tyre gel is the perfect product.

CAN BE SENT BY ROYAL MAIL

Description Pro Class Interior Detailer - 500ml

THE PROFESSIONAL SOLUTION FOR REVIVING FADED AND DISCOLOURED EXTERIOR PLASTIC TRIM

Due to weather conditions and in particular UV rays, plastic trim on vehicles can fade and suffer discolouring within a couple of years of leaving the factory. This can make the vehicle look older than it is and impact on resale values.

• HIGH CONCENTRATE TRIM RESTORER •QUICK AND EASY TO APPLY - RAPIDLY

This instantly effective E-TECH Pro Class Plastic Restorer is developed to be a simple and quick solution to rejuvinate plastic trim and make it look like new again. DO NOT compare or confuse this product with cheap spray-on silicone based products that leave a nasty, greasy, oily finish that after application will then wash off very quickly.

• CAN BE USED ON NUMEROUS PLASTIC TRIM PARTS:

RECONDITIONS PLASTIC SURFACES

•HIGH GLOSS FINISH MAKES PLASTIC PARTS LOOK LIKE NEW AGAIN • ALLOWS ORIGINAL SURFACE TEXTURE TO SHOW THROUGH

WHEEL ARCHES, BUMPERS, MIRROR COVERS & CASINGS, DOOR SILLS, BODY MOULDINGS, SPOILERS, ETC

•CAN BE USED ON BLACK OR GREY PLASTIC TRIM* •PROFESSIONAL BODY AND PAINT SHOP APPROVED * May make grey trim darker than the original shade.

Part No ER00163

Description Pro Class Plastic Restorer - 500ml

BEFORE

AFTER

NE O C SILIREE F

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Detailing and Valeting

6

Wheel Wax Premium Wheel Surface Sealer MANUFACTURED IN THE UK

E-TECH Wheel Wax contains a carefully selected blend of synthetic and natural waxes, oils, silanes and polymers including Carnauba T1 which all combine to produce a superior wheel surface sealer.

CONTAINS

CARNAUBA T1 WAX

• Molecularly bonds to the surface creating an invisible barrier to prevent the build-up of harmful contaminates which can become embedded in the surface like brake dust, winter salt, water and general road grit and grime. • Formulated to create a clear deep gloss shine which will accentuate the angles and profiles of the wheel design. • Ultra hydrophobic to ensure water is repelled and will quickly bead away making cleaning your wheels a quick and easy task. • Manufactured to ISO9001 Quality Standards to ensure optimum performance & consistency.

Suitable for all types of wheel surfaces, chromed, lacquered, painted and polished Contains 250ml Tin (180g Wax) & Storage Bag Part No ER00129

Description E-TECH Wheel Wax - 250ml

CAN BE SENT BY ROYAL MAIL

M

IC A

L RESI

200g BAR

T

BIG!

S N TA

CHE

Premium Grade 200g Clay Bar Perfect for removing: Traffic Film and Road Grime Insects • Tar • Tree Sap • Environmental Pollutants, etc. Big 200 gram premium grade white clay bar in plastic storage container. Container Size: 105mm x 66mm x 40mm • Removes bonded contaminants from painted surfaces • Prepares all types of paintwork for polishing and waxing • Achieves a professional ultra-smooth ‘like glass’ finish Part No ER00155

Description 200g Premium Grade Clay Bar - white

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

For the ultimate paint decontamination


Detailing and Valeting

7

The products below are manufactured to ISO9001:2008 quality standards • For use on all painted surfaces including GRP and composite materials • Water based • Non-toxic and free from harmful solvents • Non-flammable

c MANUFACTURED IN THE UK

1

c MANUFACTURED IN THE UK

2

c MANUFACTURED IN THE UK

3

Cutting & Flatting Compound The E-TECH C1 Cutting & Flatting Compound is the perfect BEFORE AFTER compound for cutting and flatting painted surfaces to a matt finish as part of the surface restoration process on dull, scratched, UV damaged and oxidised paintwork or preparation for polishing. • Used by paint and body shops, professional polishers, valeters, detailing companies, dedicated enthusiasts in automotive, marine and motorbike applications. • A rapid course cutting compound equivalent to 1000-1200 grit abrasive paper. • Developed for use by hand or mechanical polishers on all types of paint - water or solvent based, clear coat lacquers and varnishes. • Can also be used on glass fibre (polyester) gel coats and coated composites. • Ideal for removing and diminishing the appearance of orange peel finish, paint runs, dust nibs and deep scratches. Contents: 500ml of C1 Cutting & Flatting Compound Part No ER00142

Description C1 Cutting & Flatting Compound - 500ml

CAN BE SENT BY ROYAL MAIL

Refined Polishing Compound The E-TECH C2 Refined Polishing Compound is the perfect surface defect remover for polishing and reviving painted surfaces that have suffered from neglect and minor damage. Removes swirl marks, light scuffs and fine scratches and minor surface imperfections for a gloss finish. • Used by paint and body shops, professional polishers, valeters, detailing companies, dedicated enthusiasts in automotive, marine and motorbike applications. • A light polishing compound equivalent to 2000 grit abrasive paper. • Developed for use by hand or mechanical polishers on all types of paint - water or solvent based, clear coat lacquers and varnishes. • Can also be used on glass fibre (polyester) gel coats and coated composites. • Ideal for reviving old, dull, faded and UV damaged paintwork to make it look like new again. Contents: 500ml of C2 Refined Polishing Compound Part No ER00143

Description C2 Refined Polishing Compound - 500ml

CAN BE SENT BY ROYAL MAIL

Ultra Fine Polishing Compound The E-TECH C3 Ultra Fine Polishing Compound is our gentlest of surface renovation compounds specifically developed as the final surface treatment to bring back an ultra high gloss, flawless finish. Ideal for use on wood veneered/lacquered dash inlays and piano black interior finishes. • Used by paint and body shops, professional polishers, valeters, detailing companies, dedicated enthusiasts in automotive, marine and motorbike applications. • An ultra fine polishing compound equivalent to 3000 grit abrasive paper. PERFECT • Developed for use by hand or mechanical polishers on all types of paint - water or solvent based, FOR USING clear coat lacquers and varnishes. ON CHROME • Can also be used on delicate glass fibre (polyester) gel coats and coated composite surfaces. • Ideal for removing swirl marks, micro scratches and other paint surface imperfections for a hologram free finish. Contents: 500ml of C3 Ultra Fine Polishing Compound Part No ER00144

Description C3 Ultra Fine Polishing Compound - 500ml

CAN BE SENT BY ROYAL MAIL

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Detailing and Valeting

MANUFACTURED IN THE UK

Marine Stainless Steel Polish The E-TECH Marine Stainless Steel Polish is the perfect surface defect remover for stainless steel and glass fibre gel coats that leaves a brilliant shine and gloss finish. • Gently removes water & salt marks and minor surface imperfections. • Manufactured to ISO9001:2008 quality standards to ensure optimum performance and viscosity of this ultra fine polishing compound equivalent to 3000 grit abrasive paper. • Developed for use by hand or mechanical polishers on all types of paint - water or solvent based, clear coat lacquers and varnishes. • Ideal for use on all marine stainless steel fixtures and fittings. • Non toxic food area safe formulation which contains no solvents FOOD and is non-flammable. AREA SAFE Part No ER00145

Description Marine Stainless Steel Polish - 500ml

CAN BE SENT BY ROYAL MAIL

MANUFACTURED IN THE UK

Stainless Steel Reconditioning Polish

FOOD AREA SAFE

The E-TECH Stainless Steel Reconditioning Polish is manufactured to ISO9001:2008 quality standards using perfectly matched non-toxic ingredients that remove discolouration, oxidisation marks, water/lime scale marks to leave a brilliant shine. Suitable for automotive, motorbike, marine, industrial and domestic applications including use on other ferrous metals like steel and iron. Removes bluing from exhaust pipes, tips and manifolds and is food area safe so ideal for sinks, cookers, work surfaces etc. Part No ER00139

CLEANS & POLISHES ALL IN ONE

LIKE AGAIN

Description Stainless Steel Reconditioning Polish - 250ml

The E-TECH Alloy Technical Reconditioning Polish is manufactured to ISO9001:2008 quality standards using perfectly matched non-toxic ingredients that gently polish aluminium, brass, silver, bronze, copper and most other non-ferrous metals. Suitable for automotive, motorbike, marine, industrial and domestic applications to remove discolouration, oxidisation marks, water marks, finger prints, tarnishing and minor surface imperfections. FOOD AREA SAFE

Part No ER00140

REMOVES EXHAUST ‘BLUING

NEW

CAN BE SENT BY ROYAL MAIL

Alloy Technical Reconditioning Polish MANUFACTURED IN THE UK

8

FOR A HIGHLY POLISHED FINISH

LIKE NEW AGAIN

Description Alloy Technical Reconditioning Polish - 250ml

CAN BE SENT BY ROYAL MAIL

Clear Vision Soft PVC Restorer The E-TECH Clear Vision Soft PVC Restorer is specially formulated to restore clarity to soft PVC windows and surfaces. This compound is ideal for reviving cloudy, yellowed clear plastic surfaces on convertibles, boats, tents, caravans, motorhomes etc. Part No ER00141

CAN BE SENT BY ROYAL MAIL

BEFORE

Description Clear Vision Soft PVC Restorer - 100ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

AFTER


Detailing and Valeting Accessories

9

Headlight Lens Restoration Compound The E-TECH Headlight Restoration Compound is specially formulated for headlight restoration to bring cloudy, yellowed or oxidised headlight lenses back to a clear finish. Can also be used to remove fine scratches, scuffs, dull spots and surface contamination marks on plastic, polycarbonate, perspex and acrylic headlight lenses.

MANUFACTURED TO

BEFORE

ISO9001

QUALITY STANDARDS

AFTER

Part No ER00128

CAN BE SENT BY ROYAL MAIL

Description Headlight Lens Restoration Compound - 100ml

Detailing Hand Held Sanding Kit A comprehensive detailing hand sanding kit complete with a high quality 3” (75mm diameter) ergonomic hand sanding block and 4 of each wet and dry sanding discs in the grades P1000, P1200, P1500, P2000, P3000 (20 pieces in total). The kit has been developed for removing small imperfections and scratches in interior or exterior paintwork or lacquered finishes. Great for removing swirl marks, holograms and fine micro scratches in painted finishes. Also ideal for preparing stone chips ready for paint and/or sanding painted stone chips back to a level ready for polishing. Part No ER00161

Description Detailing Hand Held Sanding Kit

Ergonomic Hand Held Sanding Block 3” (75mm) Ø Diameter Ergonomically shaped foam hand held sanding block with a Velcro base. Part No ER00122

Description Ergonomic Hand Held Sanding Block - 1 piece

3″ Ø Abrasive Disc Pack P3000

P2000 P1500 P1200 P1000 P800 P500

High quality 3” (75mm) Ø Diameter Velcro backed wet and dry sanding discs in a wide range of abrasive grades that can either be used by hand, with our hand held sanding block or our machine sanding arbour attachment. Supplied in packs of 8 pieces. Part No ER00115 ER00116 ER00117 ER00133 ER00134 ER00123 ER00124

Description P500 Grade (Coarse 1) 3” 75mm Sanding Disc - 8 pieces P800 Grade (Coarse 2) 3” 75mm Sanding Disc - 8 pieces P1000 Grade (Medium 1) 3” 75mm Sanding Disc - 8 pieces P1200 Grade (Medium 2) 3” 75mm Sanding Disc - 8 pieces P1500 Grade (Fine 1) 3” 75mm Sanding Disc - 8 pieces P2000 Grade (Fine 2) 3” 75mm Sanding Disc - 8 pieces P3000 Grade (Fine 3) 3” 75mm Sanding Disc - 8 pieces

Please Note: Sanding discs are numbered to indicate the amount of sanding particles per square inch.

3 Sheet Abrasive Paper Pack 3 sheets of abrasive paper - fine, medium and coarse. Part No ERA/PAPER

Description One sheet of each type: Sheet size: 230x280mm - fine and medium Sheet size: 115x280mm - coarse

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


10

Detailing and Valeting Accessories

Tyre Dressing Foam Pad Radius curved foam sponge pad for precise and even application of dressing on tyres. • Solid foam grip block ensuring even pressure when applying tyre dressing. • Can also be used for fine detailing or applying other detailing products Size: 120mm x 60mm Part No ER00159

Foam Detail Cleaning Swabs

Description Tyre Dressing Foam Pad - 1 piece

Lambswool Wash Glove/Mitt The long soft pile of this high quality genuine Lambswool Wash Glove/Mitt gently draws grit and contaminants away from the surface of the paint whilst washing. Part No ER00147

Description Lambswool Wash Glove/Mitt

Microfibre Cloth Soft microfibre cloth ideal for cleaning and polishing. • Can be used to apply waxes and polishes, or for fine detailing various surfaces. • Extremely versatile and can be used wet or dry. • Machine washable and re-usable. Size: 390mm x 390mm Part No ER00137

Description Microfibre Cloth 390mm x 390mm - 1 piece

5″ Foam Polishing Pads 5” Foam Polishing Pads in either black or yellow. High quality soft closed cell foam construction for the even application of detailing products like waxes, sealants and dressings. Choice of 2 colours available to help in avoiding cross contamination of different detailing products. Ideal for use on leather, plastic, rubber and paintwork.

Part No ER00156 ER00157

Description 5” Yellow Foam Polishing Pad - 1 piece 5” Black Foam Polishing Pad - 1 piece

Ideal for cleaning in small spaces or recesses, particularly air vents and grilles. Shaped foam swab on a 140mm stick. Supplied in packs of 10

Part No AIL669

Description Foam Detail Cleaning Swabs Pack of 10

5″ Microfibre Polishing Pad 5” Microfibre Polishing Pad ideal for applying or polishing off waxes and sealants. Will not scratch painted or clear coat finishes, and provides a better polishing action than cotton terry cloths or foam. Part No ER00158

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Description 5” Microfibre Polishing Pad - 1 piece


Detailing and Valeting Accessories

Arbor Drill Attachment - 3″ Ø

11

Foam Interface Pad - 3″ Ø

3” (75mm) Ø Diameter Arbor Drill Attachment with Velcro base.

3” (75mm) Ø Diameter Black Foam Interface Pad. Velcro backed for use with the arbor drill attachment.

Part No ER00120

Part No ER00119

Description 3” Arbor Drill Attachment with Velcro - 1 piece

Lambswool Felt Pad - 3″ Ø

Description 3” Foam Interface Pad - 1 piece

Lambswool Pad - 3″ Ø

3” (75mm) Ø Diameter Lambswool Felt Pad with Velcro backing.

3” (75mm) Ø Diameter Lambswool Pad with Velcro backing.

Part No ER00136

Part No ER00135

Description 3” Lambswool Felt Pad - 1 piece

Description 3” Lambswool Pad - 1 piece

Foam Polishing Pads - 3″ Ø 3” (75mm) Ø Diameter Foam Polishing Pads in 3 different densities with Velcro backing.

SOFT HARD

Part No ER00126 ER00118 ER00125

MEDIUM

10 Pairs of Disposable Gloves

Description 3” Black Foam Polishing Pad Soft - 1 piece 3” Orange Foam Polishing Pad Medium - 1 piece 3” White Foam Polishing Pad Hard - 1 piece

5 Piece Diamond File Set Ideal for use when working in confined areas and intricate projects.

Part No ER-GLOVES10

Description 10 pairs of Disposable Gloves

Mixing Sticks

Part No ER-FILES

Description Diamond File Set - 5 piece

Surface Cleaning Sachets Ideal for degreasing and preparing surfaces for painting, adhesion, finishing, etc.

Set of 10 wooden sticks for use when mixing fillers and hardeners.

Part No ER-MIX

Description Pack of 10 Mixing Sticks

Part No ER-CSACHETX10 ER-CSACHETX25 ER-CSACHETX100

Description 10 Surface Cleaning Sachets 25 Surface Cleaning Sachets 100 Surface Cleaning Sachets

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Headlight Lens Restoration Kit

Headlight Lens Restoration Kit MANUFACTURED IN THE UK

RESTORES A CRYSTAL CLEAR CLARITY TO CLOUDY, YELLOWED AND DISCOLOURED HEADLIGHT LENSES AND REMOVES SCUFFS & SCRATCHES This kit offers a quick & simple DIY solution to remove cloudy and yellow discolouration as well as any oxidisation marks, dull spots, scuffs and fine scratches and returns headlight lenses back to a clear “Like New” condition!

• Contains enough components to restore at least 2 headlight lenses • Can be used on either front or rear light lenses • Suitable for removing light, medium and severe discolouration and contamination • Step by step easy to follow detailed instructions enclosed

THE MOST COMPLETE HEADLIGHT RESTORATION KIT AVAILABLE Most headlights are manufactured from strong clear plastic which comes with a protective surface coating. The coating is permanently under attack from road grime, stone chips, exposure to UV rays, chemicals and extreme weather conditions. In time the coating wears off the lens surface which then starts to discolour and become cloudy and yellowed. The moment your headlights start to become cloudy and yellowed your visibility whilst driving at night is greatly reduced as light output is diminished making night time driving more dangerous, not to mention making the vehicle look unsightly and uncared for. Part No ER00132

Description Headlight Lens Restoration Kit

x4 1 x 3” (75mm) Velcro Backed Arbor Sanding Drill Attachment

P500 3” (75mm) Sanding Discs - Coarse 1

x4 1 x 3” (75mm) Velcro Backed Black Foam Interface Pad Attachment

1 x 3” (75mm) Lambs Wool Fast Cut Polishing Pad

DISCOLOURED CLOUDY LENS

AFTER CRYSTAL CLEAR RESTORED LENS

RILL YD

B

AND YH

Kit contains:

1 x 100ml Bottle of Lens Restoration Compound

P800 3” (75mm) Sanding Discs - Medium 1

x4

BEFORE

B

12

The complete kit gives the option of restoration by hand or by mechanical method (drill) - or a combination of both.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

P1200 3” (75mm) Sanding Discs - Fine 1

1 x 100ml Bottle of Lens Surface Sealer

x4 1 x 3” (75mm) Orange Foam Medium Cut Polishing Pad

P1500 3” (75mm) Sanding Discs - Fine 2

1 x Microfibre Cloth

x4 1 x 3” (75mm) Ergonomic Hand Sanding Pad

P2000 3” (75mm) Sanding Discs - Ultra Fine 1

Instruction Booklet

1 x Pair of Latex gloves (substitute if you have an allergy to latex)


Headlight Lens Tinting

13

Lens Tinting Our revolutionary light lens tinting product is designed for use on front head lamps, rear tail lights and side repeater lenses. Suitable for use on glass or plastic light lenses. Due to their special transparency properties they offers a simple legal solution to styling and customising your light lenses. • Achieve an aggressive subtle styling with minimal light distortion and reduction • Creates a subtle but dramatic styling upgrade for any light lens • Ideal for cars, pick-ups, 4x4s and motor bikes • Quick and easy to apply and can be removed • Can be used on front, rear, side or fog light lenses • MOT vehicle test passed (see packaging for details)

Lens Tinting Kit Lens Tinting Kit contains: • 1 x 150ml Lens Tint Spray • 1 x 150ml Remover Spray • 2 x Degreaser/Cleaner Sachets • 1 x Instructions Sheet All items can be purchased separately.

Kits available in 4 colours: Part No ELS-00160 ELS-00161 ELS-00162 ELS-00163

Colour Smoke Red Blue Green

Lens Tint & Remover

RED

Available in 150ml aerosols as single tins.

BLUE SMOKE Part No ELS150-SMOKE ELS150-RED ELS150-BLUE ELS150-GREEN ELS150-REM

Colour Single tin of Smoke Single tin of Red Single tin of Blue Single tin of Green Single tin of Remover

GREEN

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


14

High Temperature Paint

XHT Xtremely High Temperature Paint LACQUER

WHITE

SILVER

GRAPHITE

BLACK

RED

The E-TECH XHT paint formula has been developed using the latest advances in paint technology. Designed for surfaces that are exposed to extremely high temperatures, this paint will coat, protect and enhance wherever it is applied. • Ideal for engine blocks, rocker covers, exhausts and manifolds • Long lasting high quality finish • Easy to apply with fast curing time • Strong adhesion • Allows personalisation and reconditioning of parts Part No XHT001 XHT002 XHT003 XHT004 XHT005

Colour Black - 400ml Silver - 400ml White - 400ml Graphite - 400ml Red* - 400ml

Temperature Rating 650°C (1202°F) 650°C (1202°F) 650°C (1202°F) 650°C (1202°F) 350°C (662°F)

Suitable for applications such as: • Automotive • Industrial • Motorsport • Marine • Domestic

*Please note that the red XHT paint is only rated to 350°C (662°F) as above this temperature the colour may fade.

XHT Xtremely High Temperature Clear Lacquer For use where exposure to high heat is an issue • Seals painted and bare metal surfaces to prevent against pitting and rusting •Resistant to petrol, diesel, oil, anti-freeze and other engine bay chemicals • Ideal for protecting surfaces such as pipe work and bulk heads, etc, from radiant heat and thermal fatigue • Produces a gloss finish for matt and satin surfaces

Part No Colour XHT006C Clear Lacquer - 400ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Temperature Rating 800°C (1472°F)


Caliper Paint

15

Brake Caliper Paint Heat rated to 220°C BLACK BLUE BRITISH RACING GREEN COPPER GLOSS SKY BLUE GOLD

The E-TECH Caliper Paint is a one part paint system which requires no mixing with hardeners or priming and is therefore easy to use with no mess. It is easy to apply, quick drying and has an outstanding, long lasting high quality finish which will enhance your vehicle’s brake calipers and wheel hubs. Can be re-sealed and used at a later date for touch-ups and repairs.

GRAPHITE LIME GREEN MATT BLACK MATT RED

• Resists Brake Dust, Cleaning Chemicals, Road Salt and Oil • Easy to use and apply • No dismantling of parts required • Stunning long lasting high quality finish

ORANGE PINK RED

KIT CONTAINS: • 1 x 250ml Paint tin • 1 x Paint Brush • 1 x 500ml Brake Parts Cleaner aerosol • 1 x Detailed Instructions

SILVER VIOLET

Wheel Hubs

WHITE YELLOW

Brake Calipers

We have a range of 17 popular colours available which come complete with our high quality brake cleaner and a paint brush. Part No Colour EBCP-BK Black EBCP-BL Blue EBCP-BRG British Racing Green EBCP-C Copper EBCP-GSBL Gloss Sky Blue EBCP-G Gold EBCP-GRA Graphite EBCP-GR Lime Green EBCP-MB Matt Black EBCP-MR Matt Red EBCP-O Orange EBCP-P Pink EBCP-R Red EBCP-S Silver EBCP-V Violet EBCP-W White EBCP-Y Yellow

High Performance Brake & Clutch Parts Cleaner Keeping your brakes in good condition is essential no matter what you are doing in your car: whether it is just a quick trip to the shops, out on a track day experience, or actually participating in a motor sport activity. A build up of brake dust, road debris and grime can contaminate brake pads, discs, calipers and drums which will in time cause a loss of braking performance and may cause uneven braking, chattering or squeaking brakes. A clean brake assembly and system will respond and work much more effectively.

• Quickly and effectively cleans the brake assembly • Can be applied without dismantling any parts • Rapidly evaporates leaving no residue • Removes even the toughest deposits of brake dust and road grime • Ideal for degreasing metal and alloy components • Can size - 500ml Part No EBP-006

Description Brake & Clutch Parts Cleaner - 500ml size

Performance Brake Assembly Maintenance

High Performance Applications

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Engine Enamel

Engine Enamel

ROCKER COVER BRITISH RACING GREEN

Ideal for engine blocks, valve, rocker and differential covers as well as gear casings and other engine bay components and brackets.

ENGINE BLOCK

10 colours available BLUE

RED

BRITISH RACING GREEN

SILVER

GOLD

WHITE

LIME GREEN

YELLOW

CAM BELT PULLEY BLACK

W SUMP

BLACK

Supplied in a full colour box

ENGINE BAY AREA

ITHSTAN

PE

DS

ORANGE

ENGINE BRACKETS AND MOUNTS SILVER

TEM

BLACK

BLUE

VALVE COVER

RED CAM BELT COVER BLACK

• Long lasting high quality gloss finish • Easy to use & apply - brush on application • Resists oil, engine additives, chemicals, road salt & weathering • Excellent durability - chip & crack resistant formula • No hardener required • 250ml re-sealable tin enables repairs and small touch-ups when needed ROCKER COVERS

ENGINE HEAD AND BLOCK BRITISH RACING GREEN

R AT U R

Part No Description EE01-BK Black EE02-BL Blue EE10-BRG British Racing Green EE07-G Gold EE08-LG Lime Green EE05-O Orange EE03-R Red EE04-S Silver EE09-W White EE06-Y Yellow

Alloy Wheel Repair Putty

Alloy Wheel Repair Putty Alloy technology in a tube! Specially formulated for repairing alloy wheels, this unique putty is developed to bond to aluminium. Ideal for filling scratches, deep scuffs and kerb damage. Supplied as a 10cm long stick it is easy to shape, sand and paint.

Part No AWP-01

Putty mixed and applied to damaged wheel surface

Description 10cm Alloy Repair Putty Stick

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

E

S

16

Putty sanded, shaped and ready to paint


Alloy Wheel Repair Kits BEFORE

17

ALLOY WHEEL REPAIR KITS

AFTER

Achieve a professional wheel refurbishment at a fraction of the price!

It’s so easy to damage your alloy wheels and expensive, inconvenient and time consuming to get them refurbished. However, E-TECH Engineering has come up with a solution for repairing deep scuffs, scratches and kerb damage to the wheel rim and most other superficial non-structural damage. This kit provides all the components you need to repair your alloy wheels yourself and contains detailed instructions of how to achieve a professional finish that is virtually invisible to detect. So if your alloys are damaged and looking second hand, for a small investment in time and money you can dramatically improve their appearance and the value of your car.

Typical Wheel Damage...

KERBED

SCRATCHED

3 Steps to Repairing Wheel...

SCUFFED

1: FILL

2: SAND

3: SPRAY

The Complete Alloy Wheel Repair Kit Kit Contains: • 400ml tin of Alloy Wheel Clear Lacquer • 400ml tin of Alloy Wheel Spray Paint • 10cm tube of E-TECH Alloy Wheel Putty • Applicator • Masking tape • Pair of gloves • 5 Diamond files • 3 sheets of sandpaper (Coarse x1/Medium x1/Fine x1) • Flexi wheel rim shield • 2 Degreasing sachets • Detailed fitting instructions Part No AW-KIT-01 AW-KIT-02 AW-KIT-03 AW-KIT-04 AW-KIT-05

Description Metallic Silver Alloy Wheel Repair Kit Motorsport Black Alloy Wheel Repair Kit Competition White Alloy Wheel Repair Kit Technik Grey Alloy Wheel Repair Kit Drift Gold Alloy Wheel Repair Kit

All items can be purchased separately

KITS AVAILABLE IN THE FOLLOWING FIVE COLOURS:

METALLIC SILVER MOTORSPORT BLACK COMPETITION WHITE TECHNIK GREY DRIFT GOLD

Micro Alloy Wheel Repair Kit This kit provides the 2 most important ingredients: a tube of Alloy Wheel Repair Putty and a 12ml Touch-Up Paint Stick. Quick and easy to use and perfect for repairing minor damage. Kit Contains: AVAILABLE IN METALLIC MOTORSPORT • 10cm tube of E-TECH Alloy Wheel Putty SILVER BLACK FIVE COLOURS: • 12ml Touch-Up Paint Stick DRIFT TECHNIK COMPETITION • Pair of gloves • Detailed instructions GOLD GREY WHITE Part No AW-KIT-02M AW-KIT-03M AW-KIT-04M AW-KIT-05M AW-KIT-06M

Description Metallic Silver Micro Alloy Wheel Repair Kit Motorsport Black Micro Alloy Wheel Repair Kit Competition White Micro Alloy Wheel Repair Kit Technik Grey Micro Alloy Wheel Repair Kit Drift Gold Micro Alloy Wheel Repair Kit

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


18

Alloy Wheel Paint

PRO Alloy Wheel Paint CHROMIUM BRIGHT SILVER

METALLIC GRAPHITE

BAVARIAN DARK ANTHRACITE

METALLIC MIDNIGHT BLACK

MANUFACTURED TO

ISO9001

QUALITY STANDARDS

Introducing our latest range of alloy wheel refurbishing paints available in 4 new hi-tech colours reflecting the latest trends and styles. All of the colours in the range use the latest aerosol technology incorporating a high flow adjustable dual spray nozzle for smooth even coverage that gives you more control and versatility to achieve a professional looking finish.

CHROMIUM BRIGHT SILVER Chromium Bright Silver is probably the brightest silver paint available! The combination of ultra-bright silver paint and a fusion of fine metallic particles produce a brilliant finish that will make your alloys stand out from the crowd.

Part No PROAWP-701

Colour Chromium Bright Silver - 400ml

BAVARIAN DARK ANTHRACITE Bavarian Dark Anthracite is immediately recognizable as the Germanic performance wheel colour of choice. It offers subtle aggressive styling that delivers a really powerful look to your alloys.

Part No PROAWP-703

Colour Bavarian Dark Anthracite - 400ml

FITTED WITH PRO NOZZLE FOR HORIZONTAL AND VERTICAL ADJUSTMENT

METALLIC GRAPHITE Metallic Graphite produces an ultra-modern finish that will transform your alloys. Our high tech coating contains metallic particles that give greater definition, highlighting the design and contours of your alloy wheels.

Part No PROAWP-702

Colour Metallic Graphite - 400ml

METALLIC MIDNIGHT BLACK Metallic Midnight Black is a rich deep black gloss paint blended with ultra-fine metallic particles producing a wheel finish that especially in sunlight looks fantastic, creating a unique individual look.

Part No PROAWP-704

Colour Metallic Midnight Black - 400ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Alloy Wheel Paint

19

Alloy Wheel Paint METALLIC SILVER

TECHNIK GREY

MOTORSPORT BLACK

DRIFT GOLD

COMPETITION WHITE

ALLOY WHEEL LACQUER

Developed to refurbish, refresh or customise alloy wheels, giving them a totally new appearance and a new lease of life. • Specially formulated to provide a durable coating which protects against brake dust, cleaning chemicals and road salt. • Dries to a hard, chip resistant, long lasting satin finish that resists cracking and flaking. • Excellent adhesion qualities for a professional finish.

METALLIC SILVER

A medium metallic silver with great reflective qualities and depth.

Part No AWP-60021 TUP-06025

Description 400ml Aerosol 12ml Touch-Up Stick

DRIFT GOLD

A uniquely blended colour that gives a distinctive deep golden metallic finish

Part No AWP-7506 TUP-7506

Description 400ml Aerosol 12ml Touch-Up Stick

TECHNIK GREY

MOTORSPORT BLACK

Part No AWP-7016 TUP-7016

Part No AWP-08028 TUP-08028

A subtle but precise metallic anthracite colour creating a modern hi-tec finish

COMPETITION WHITE

A lustrous brilliant white finish creating the perfect classic competition look

Part No AWP-08027 TUP-08027

Technik Grey

Description 400ml Aerosol 12ml Touch-Up Stick

Drift Gold

Description 400ml Aerosol 12ml Touch-Up Stick

Competition White

A definitive deep, rich finish for the ultimate aggressive motor sport look

Description 400ml Aerosol 12ml Touch-Up Stick

ALLOY WHEEL LACQUER

Our fine mist clear lacquer provides the finishing touch and gives your alloys that new showroom look. • Dries to a hard hi-gloss wet-look finish • Scratch resistant protective coating • Resistant to fuel, chemicals, UV rays and weathering • Easy to apply and quick drying

Part No Description AWL-187216 400ml Aerosol TUP-187216 12ml Touch-Up Stick

Motorsport Black

Metallic Silver


20

Touch-Up Paint Sticks

Touch-Up Paint Sticks available in a range of popular colours We have introduced a small range of popular colours that have a wide range of uses and mass appeal. These 12ml touch up sticks can be used for covering up minor scuffs and scratches and hiding accidental damage on numerous items - cars, bikes, boats, appliances, household items etc. These acrylic gloss* paint colours are based on the RAL system which is the European standard used for paint matching. You can go on-line and check exact description of most of the below touch up sticks. Please note it is your responsibility and your customer’s responsibility to check the colour reference prior to this product being used to ensure they are happy with it. Part No

Description

Part No

Description

RAL6018

Lime Green

RAL3003

Ruby Red

RAL6005

Dark Green

RAL5012

Sky Blue

RAL1018

Bright Yellow

RAL5003

Navy Blue

RAL9007

Dark Metallic Silver

RAL5002

Royal Blue

RAL7001

Light Grey

RAL2009

Orange

RAL7031

Medium Grey

RAL7016

Dark Grey

RAL7035

Grey Primer

RAL3001

Post Box Red

* All gloss except for the Grey Primer which is a matt finish

Alloy Wheel Paint Touch-Up Sticks These 12ml Touch-Up Paint Sticks are ideal for covering minor scuffs & scratches. Available in 5 colours to match our range of alloy wheel paint. See page 19. Part No

Description

TUP-08028 Motorsport Black TUP-08027 Competition White TUP-7506

Drift Gold

TUP-7016

Technik Grey

TUP-06025 Metallic Silver

Technik Grey

Drift Gold

Competition White

Motorsport Black

Clear Coat Lacquer Touch-Up Stick High gloss clear coat lacquer touch up stick available in a 12ml tube which is ideal for covering minor scuffs and scratches. Great for touching up alloy wheels, body panels and other lacquered surfaces. Part No TUP-187216

Description Clear Lacquer Touch-Up Stick

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Metallic Silver


R EPAIR& RESTORATION

RESTORATION PRODUCT RANGE

1

Our Vehicle Repair & Restoration product range has been developed to provide an effective and economic solution to repairing typical vehicle damage from the hazards of modern day motoring. The damage usually affects door mirrors, wheel arches, bumpers and the lower and middle side bodywork and can be categorised mainly as scuffs, scratches and small dents. If you are prepared to put in a bit of time and effort a saving of up to about 80% can be achieved which will both improve your vehicle’s appearance and increase its resale value.

REPAIRING A SCRATCH OR SCUFF

Check the depth of the scratch - If it is under 3mm (3000 microns) deep see the below steps of how to repair and which products to use: If it is deeper than 3mm - SEE 3 Step 1 Clean the surface with Technik Surface Deep Cleaner Part No:ER00102 Step 2 Fill the scratch or scuff using either of the following: Ultra Fine Surface Detailing Filler Part No: ER00107 - the ideal finishing layer for an ultra smooth finish and then use Technik Repaired Surface Primer Part No: ER00109 to prime the filled area ready for the top coat of paint. Technik 2 in 1 Filler & Primer Part No: ER00108 - use to fill and prime a scratch or scuff under 0.5mm (½ mm - 500 microns) deep. Apply several coats/layers. When filled apply the top coat of paint.

3

REPAIRING A DENT, DEEP SCRATCH OR CREASE IN BODY WORK

Step 1 Clean the surface with Technik Surface Deep Cleaner

Part No: ER00102

Step 2 Fill the damaged area using Advanced Body Filler

Part No: ER00103

Step 3 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.

2

REPAIRING A HOLE IN A BODY PANEL - Caused by accident or rust

Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102 Step 2 Bridge and fill the hole with Fibre Reinforced Hole Bridging Filler Part No: ER00105

Step 3 Then for a smooth finish cover the Fibre Reinforced Filler using the Advanced Body Filler Part No: ER00103 Step 4 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.

4

REPAIRING HOLED OR CRACKED PLASTIC BUMPER

Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102 Step 2 Bridge the hole or crack from behind using Fibre Reinforced Hole Bridging Filler Part No: ER00105 Step 3 Fill the damaged area from the front using Plastic Bumper & Trim Repair Putty Part No: ER00101 Step 4 Use the Technik Plastic Flexi Pre-primer Part No: ER00110 over the filled surface prior to painting for maximum paint adhesion. Step 5 Spray over the plastic pre-primer with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

21


REPAIR&

Repair & Restoration

RESTORATION

Advanced Body Filler

D ERE INE NY ENG ERMA IN G

• Suitable for filling and repairing dents, gouges, splits and scratches with a depth of up to 30mm. • Specially developed for use on both modern day vehicle body panels as well as traditional steel ones.

TE

CH

1 DENTED BODY PANEL

VA NCE

• Excellent adhesion to bodywork • Easy to sand and shape • When sanded leaves a smooth finish for priming and painting • New pre-accelerated formula - fast setting • Impact resistant with good flexibility • Polyester based filler • Waterproof and includes anti-rust properties • Suitable for professional paint shop oven - heat resistant up to 120°C • Can be used as a general purpose filler on steel or alloy bodywork, rigid plastics, glass fibre (GRP), wood and masonry

D

T US -R L A TI U AN ORM F

AD

NOLOGY

Part No ER00103 ER00164

2 DENT PREPARED

Description Advanced Body Filler - 500g (488g Filler/12g Hardener, Instructions and Applicator) Advanced Body Filler - 700g (685g Filler/15g Hardener, Instructions and Applicator)

3 DENT FILLED

4 FILLER SANDED

READY FOR PRIMING

Fibre Reinforced Hole Bridging Filler • Developed for filling and bridging holes, splits & cracks in body panels & bumpers. • Ideal for repairing rust damaged areas: rusted wings, rust bubbles, wheel & door edges etc

EC

DAMAGED AND DENTED BODYWORK

FIBRE REINFORCED FILLER

GY

D

SUPER STRONG

VA NCED

HNOLO

Holed Panels Part No ER00105

D ERE INE M ENG ERFOR TO P

E-TECH ADVANCED FILLER APPLIED OVER THE TOP OF FIBRE FILLER SO IT CAN BE SANDED TO A SMOOTH FINISH READY FOR PRIMING & PAINTING

T

• Gives structural strength to any repair • Ultra strong adhesion to bodywork • Impact resistant, fast setting and waterproof • Provides a secure platform to build up layers of body filler for a smooth surface finish • Perfect for filling rust damage areas and rust spots • Can be used on steel or alloy body panels, plastic bumpers and glass fibre (GRP)

A

22

Description Fibre Reinforced Hole Bridging Filler - 400g (390g Filler/10g Hardener, Instructions and Applicator)

Rusted Wheel Arches

Rust Holes

Great for repairing and reinforcing rusted wheel arches, exposed edges, holed bodywork, etc

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


REPAIR&

Repair & Restoration

RESTORATION

Ultra Fine Surface Detailing Filler

U

• The perfect finishing layer for an ultra smooth finish • Air dries - no hardener required I M AT E LT

R

FILLE

D ERE INE NY ENG ERMA IN G

• Ideal for minor bodywork dents, shallow scuffs and scratches. • Can be applied directly into the damaged area and will fill up to a depth of 3mm - 3000 microns(µ) • New Nano Polymer technology creates an Supercar ultra smooth finish leaving no air bubbles Surface Finish and ready for priming and painting. • Easy to sand and shape leaving no swirl marks or pin holes. • Excellent adhesion to bodywork and other fillers. • Can be used on metal or alloy panels, rigid plastics, glass fibre (GRP) and is the perfect finishing layer to any other body filler. Part No ER00107

Description Ultra Fine Surface Detailing Filler - 250g

Supplied with detailed Instructions and Spreader

Plastic Bumper and Trim Repair Putty

TE

ANO GY

N

The perfect repair solution for cracked, split and holed plastic bumpers and trim.

C H N OLO

D ERE INE ANY G N E ERM IN G

• Excellent adhesion to original bumper • Ultra fine formula eliminates air bubbles and provides a smooth finish • Easy to sand and shape to original bumper contours • Can be painted • Simple and easy to use and apply • Good flexibility and fast setting • Can be used on all types of plastic bumpers, wheel arches and most other automotive plastic trim parts Ideal for cracked, holed or split front and rear bumpers

Supplied with detailed Instructions, Hardener and Spreader

Part No ER00101

Applicators/Spreaders Set of 3 applicators/spreaders for use when applying body fillers or putties. Size: 75mmx 95mm

Part No ER/SPRD

Description 3 Applicators/Spreaders

Description Plastic Bumper and Trim Repair Putty - 250g (242g putty/8g hardener)

Additional Hardener for E-Tech Body Fillers The same hardener is suitable for all E-TECH Fillers.

Part No ER-H50G

Description Hardener - 50g

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

23


REPAIR&

Repair & Restoration

RESTORATION

Technik 2 in 1 Filler & Primer Fills minor scuffs, scratches and surface imperfections up to 500 microns (µ), 0.5mm / ½mm while at the same time primes the surface so it is ready to accept the top coat of paint

BODYWORK PRIMER PAINT DAMAGED AREA BEING FILLED AND PRIMED

GY

AD

DAMAGED AREA

• Perfect for filled and sanded surfaces C VA N ED • Ideal for smoothing out textured or rough surfaces TE CH NOLO • The ‘High build’ nature of this product and easy sanding provide great surface levelling properties • Excellent foundation for the top coat of paint • Can be used on most painted or unpainted metal surfaces, rigid plastics, glass fibre (GRP), wood and masonry

N IO OS RR LA CO MU TI OR AN F

Part No ER00108

Ideal for minor scuffs and scratches

Flattens out uneven textured surfaces Description Technik 2 in 1 Filler & Primer - 400ml

Technik Repaired Surface Primer Specially developed for repaired, restored and filled surfaces

D ERE INE ANY G N E ERM IN G

BEFORE PRIMING

• Excellent adhesion qualities for all types of filler • Provides a firm foundation for the top coat of paint • Good flexibility and can be used on semi-rigid surfaces like plastic bumpers • Quick drying with great coverage • Can be used on fillers & putties, metal surfaces (painted or unpainted), most NC VA ED plastics, glass fibre (GRP), masonry and wood

D ERE INE NY ENG ERMA IN G

AFTER PRIMING

PRIMED AND READY FOR PAINTING

N IO OS RR LA CO MU TI OR AN F

TE

Part No ER00109

GY

AD

24

C H N OLO

Description Technik Repaired Surface Primer - 500ml

Plastic Flexi Primer Specially developed to prepare all plastic surfaces for painting

PLASTIC FLEXI-PRIMER 1

NG TI IN PA TIC ES AS LE AK L P M P SIM

2

TOP COAT

• Ideal for use on flexible & rigid plastics • Seals plastic surfaces and ensures a strong foundation for the top coat of paint • Fast drying with advanced paint adhesion promoter • Increases the chip resistance of top coat of paint • Specially developed by professional paint and body shops for DIY use Ideal for preparing plastic trim: flexible bumpers, vents, grilles, fog lamp housings etc, prior to painting Vents

Part No ER00110

PRIMED AREA

D ERE INE RM ENG ERFO TO P

GREAT STYLING UPGRADE

Grilles

Description Plastic Flexi Primer - 400ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Flexible Bumpers


REPAIR&

Repair & Restoration

RESTORATION

Ultra Zinc Primer

99 % CONTAIN

ZI

NC

LE

PURE

Provides maximum rust protection for all ferrous metal surfaces

S

S

D ERE INE RM ENG ERFO TO P

IC

PA R T

E-TECH Ultra Zinc Primer is a long life surface coating for ferrous metals that protects against rust & corrosion by using a combination of 99% pure zinc particles and modified resin binders to create a tough non-porous barrier against moisture and oxygen. This zinc enriched formula provides cathodic electro-chemical corrosion protection which means that ferrous metal surfaces are kept free from corrosion even if the surface coating is damaged by stone chips, minor knocks or scratches.

Part No ER00111

Description Ultra Zinc Primer - 500ml

Perfect for bodywork and panels

Ideal for vehicle chassis & sub-frame restoration and protection

Technik Self-Etch Primer

D ERE INE ORM G N F E ER TO P

Specially developed to allow notoriously difficult surfaces to be painted such as: • Aluminium • Stainless Steel • Galvanised, treated or untreated steel AD

• Bare Metals • Fibre Glass

When sprayed on to a surface a chemical process starts and the acid content impregnates the top layer of the surface and provides a firm foundation. Compatible with virtually any primer or top coat of paint.

ES IM PR P & STE ES NE CH O ET IN

• Chemically etches the surface creating a firm foundation for primer and paint • Microscopically impregnates the first few microns of the surface promoting excellent primer and paint adhesion • Ideal for restoration and refurbishment of alloy wheels

Alloy wheel preparation Part No ER00112

Engineering applications

Description Technik Self-Etch Primer - 400ml

D

TE

CH

VA NCE

Y NOLOG

Specially developed by Professional Paint & Bodyshops for DIY use If you are performing any repair or restoration work to your vehicle, or sticking anything to it, the first step is to clean the surface you are going to be working on properly. Our Surface Deep Cleaner is the perfect product for this job.

TE

NCED

C H N OLO

This is what happens if you don’t etch primer first!

Technik Surface Deep Cleaner AD

VA

GY

Y PL AP T TO FAS G SY D IN EA AN RY D

• Excellent electrical conductivity for welding • Suitable for coating and touching up galvanised surfaces • Ideal for vehicle chassis and sub-frame restoration and protection

D ERE INE ORM G N F E ER TO P

• Quickly and effectively removes all traces of polish, wax, silicone, oil, grease, tar, insects & adhesive residue • Developed to enhance the adhesion of fillers, primers and the top coat of paint • Safe to use on painted surfaces Safe to use on carbon • Used by professional car valeting companies and composite surfaces for a really effective surface deep clean

E IV CT FE N EF A & LE K C IC EEP QU D

Ideal for deep cleaning damaged & repaired areas before priming and painting

Ideal for fine detail cleaning Part No ER00102

Description Technik Surface Deep Cleaner - 400ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

25


26

Uber Air - Air-Conditioning Purifier ®

A IR CO NDI TIONING PURIFIER Tested

A revolution in a/c maintenance!

Tested and guaranteed to kill bacteria, fungi & mould on contact.

Passed

FOR A CLEAN & HEALTHY AIR CONDITIONING SYSTEM Airborne bacteria and fungal spores when circulated via the vehicle’s air conditioning system and then inhaled can affect the health of passengers with flu-like symptoms, allergic reactions or sick car syndrome.

★ Tested to Euro

pean ★ Disinfection Standard BS EN13697

PASSED

The below are typical examples of bacteria & fungi which are killed on contact by using Über Air.

• Inhibits the growth of bacteria

Black Mould Aspergillus niger

MRSA bacterium

Salmonella typhimurium

E.coli Escherichia coli

Staphylococcus aureus

Enterococcus hirae

Pseudomonas aeruginosa

Candida albicans - Yeast

Über Air will also kill numerous other bacteria and fungi Kit Contains:

THE PRODUCT THAT WORKS

and prevents the discharge of fungal spores. • Neutralises and eliminates damp, musty odours from the a/c unit, not just masking them. • Über Air A/C Purifier has been tested to European Disinfection Standard BS EN 13697 and passed. • Specially developed for professional vehicle a/c engineers and the automotive trade, Über Air is now available for DIY use.

TYPICAL VEHICLE A/C SYSTEM LAYOUT

No complicated dismantling of parts, easy and straightforward to use. Supplied with detailed instructions.

• 300ml A/C Purifier • 100ml Air Freshener • 80cm extension hose • 40mm long extension nozzle • Instruction booklet • Protective gloves Part No UAP-KIT1 UAP-KIT2 UAP-KIT3 UAP-KIT4 UAP-KIT5 UAP1

Description Über Air A/C Purifier Kit with Air Freshener - Cool Vanilla Über Air A/C Purifier Kit with Air Freshener - Summer Berries Über Air A/C Purifier Kit with Air Freshener - Fresh Apple Über Air A/C Purifier Kit with Air Freshener - Linen Fresh Über Air A/C Purifier Kit with Air Freshener - Lily of the Valley Über Air A/C Purifier Can 300ml

Example of a vehicle A/C Evaporator

By using the Über Air A/C Purifier you will get the desired result, an A/C system that does not smell and is free from bacteria, mould and fungi and delivers clean air into the vehicle’s interior.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Air Fresheners

27

Circulating Air Freshener and Air-Con Refresher PRESS VALVE DOWN

One click and the fragrance erupts, neutralising odours and infusing the air!

R

ES

ANCE

GR

REF

RA

G

NEW

Ideal for •Cars •Vans •Trucks •Motorhomes Can also be used as an Air Freshener for caravans, motorhomes, boats, static homes, etc

N

A range of 5 fragranced Air Fresheners designed to be used in conjunction with the vehicle’s ventilation system. C U L AT CIR I Circulates around the vehicle via the ventilation and/or air-conditioning system. HIN

G

F

Part No Fragrance AF001 Cool Vanilla - 100ml AF002 Summer Berries - 100ml AF003 Fresh Apple - 100ml AF004 Linen Fresh - 100ml AF005 Lily of the Valley - 100ml Suitable for a single use only.

Rodent Repellant

RATSTOP! Deters rodents and vermin from chewing cables, wires & hoses.

MICE

RATS

This may seem an unusual product, however, we believe it will appeal to quite a number of motoring enthusiasts, especially those who store vehicles and equipment in outbuildings or rural locations (classic car & race car owners, gardening & agricultural equipment etc). RATSTOP is specially developed to help protect exposed cables, wiring and hoses from being chewed and gnawed by rodents, especially rats and mice. It is not a poison but rodents find the taste unpleasant and the smell agitates them so they do not settle in treated areas. It is a clear slightly viscous solution that dries quickly leaving a thin layer over any surface it has been applied to. Instantly effective and simple to use. Contents: 150ml of RATSTOP

RABBITS Part No ER00114

SQUIRRELS Description Ratstop - 150ml

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Fire Extinguishers & Spring Aids

1kg Dry Powder Fire Extinguisher

Fire Rated 8A 34B C

• Complies with all UK and EU Legislation • All information on the label in English • Manufactured in the EU • Fitted with a pressure gauge • Ideal for cars, vans, boats, caravans, etc • Supplied with mounting bracket and clear English fitting instructions Part No GP-1x ABC/MP

Working pressure range is between 8.5 to 14.5 bar

Description 1kg Dry Powder Fire Extinguisher

APPROVED FOR USE ON THE FOLLOWING TYPES OF FIRE:

Fires involving solid materials like wood, paper, furnishings, plastic, etc

Fires involving flammable liquids & liquefiable solids

Fires involving gases

ACCREDITATIONS AND CERTIFICATES OF APPROVAL:

AN

★★

5 YEAR W

Coil Spring Aid

UFACTURE

RS

M

28

★★

ARRANTY

ISO 9001 BUREAU VERITAS CERTIFICATION MANUFACTURED IN ACCORDANCE WITH ISO9001 STANDARDS. EUROPEAN TECHNICAL APPROVAL OF CONFORMITY FOR FIRE EXTINGUISHERS.

Electrical fires involving devices up to 1000 Volts

MANUFACTURED IN THE EU

CONFORMS TO EU MARINE EQUIPMENT DIRECTIVE.

GERMAN CERTIFICATION OF APPROVAL. BSI KM 640707 APPROVAL NO. SP 182/15 ACC. DIN EN3-7. THIS FIRE EXTINGUISHER CONFORMS TO BRITISH AND EUROPEAN STANDARD BS EN 3-7 FOR PORTABLE FIRE EXTINGUISHERS.

SUITABLE FOR CARS, LIGHT COMMERCIALS & 4x4s

CO L

SPRING AID THE SIMPLEST WAY TO SUPPORT SUSPENSION

WHEN TOWING OR TRANSPORTING HEAVY LOADS • Manufactured from high density super strength rubber • Helps support towing vehicle hitch height when hooked up • Reduces risk of springs bottoming out on uneven ground preventing damage • Helps with weight transfer when accelerating and under braking • Assists with stability of towing or heavily laden vehicles • Helps with headlight beam alignment

EASY TO FIT Helps support vehicle suspension height and reduces pitching of the attached caravan/trailer.

Supplied with detailed fitting instructions in clear English. Available in 4 sizes Part No Description SA001 Fits into Spring Gap 18-25mm SA002 Fits into Spring Gap 26-38mm SA003 Fits into Spring Gap 39-51mm SA004 Fits into Spring Gap 52-66mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Vehicle Body Protection and Styling

29

“The knocks, dents and chips that vulnerable body and paintwork can acquire in a car park from other cars or from opening the door onto a pillar or post can be prevented”. STIC TO

A

ND

PROTEC

T

PAINT PROTECTION FILM AND SPRAY

K

DOOR GUARD

STONE PROTECTION

SILL GUARD BUMPER GUARD

ARCH GUARD

Sooner or later you will probably have to park your vehicle in a tight space where the possibility of you or someone else knocking your bodywork is highly likely. When this happens it is very annoying and expensive to repair. However, by fitting our range of vehicle body protection products this costly damage can be prevented. These products are conservatively styled and look like an original part of the vehicle. Simple to install, self-adhesive and require no drilling. They offer all round protection and help maintain resale value.

Heavy Duty Body and Bumper Guard

47mm wide

5m roll of flexible PVC. Designed to be fitted to bodywork which is vulnerable to accidental bumps and knocks. Can be fitted in any position to any body panel that needs protection. 8 end caps are provided so that a professional looking finish can be achieved.

6mm

x8 End Caps for a professional finish!

x8

PROTEC

T

A

ND

STICK 47mm wide

TO

Part No Description BMG001-B Body & Bumper Guard - 5m roll with 8 end caps BMG001-B-END Pack of 8 extra end caps

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Vehicle Body Protection and Styling

Body and Bumper Guard

21mm wide STICK

All you need to achieve a professional finish. Can be used to highlight and protect vehicle body contour lines and is ideal for exposed bumper corners and protruding edges.

PROTEC

T

A

ND

Discreet low profile design offers protection for vulnerable bodywork

• Protects paintwork from annoying ‘car park’ acquired chips and dents,etc • Will stick to painted metal surfaces, most plastics, fibre glass and composite materials • Quick and easy self-adhesive DIY fitting with no drilling required

3mm

x8 End Caps for a professional finish!

FRONT BUMPER PROTECTION

x8

Part No Description BMG002-B Body & Bumper Guard 5m roll with 8 end caps BMG002-B-END Pack of 8 extra end caps

LOWER REAR BUMPER PROTECTION

LOWER DOOR AND SILL PROTECTION

Bumper Corner Protectors

TO

Protects vulnerable bumper corners, paint and bodywork

A

Protruding painted bumper corners are easy to knock and scuff and are expensive to repair and respray. E-TECH Bumper Protectors are designed to help eliminate this problem.

ND

STICK

PROTEC

T

TO

21mm wide

30

Typical damage

that can be avoided • Will conform to most bumper shapes and contours. • Manufactured from tough impact absorbing flexible PVC. • Easy to fit, self-adhesive with strong adhesion. • Size: 445mm long (17.5 inches) x 40mm wide (1.5 inches)

Part No BG002-CR BG003-BK

Description Chrome Bumper Corner Protectors - 2 pieces Black Bumper Corner Protectors - 2 pieces

Transparent Bumper Corner Protectors 260mm long x 30mm wide x 10mm thick transparent self-adhesive bumper corner protectors. Suitable for front and rear bumper corners to protect against knocks and scuffs. Easy to fit and will conform to most bumper shapes and contours. 2 pieces per pack. Part No LP20618

Description Transparent Bumper Corner Protectors - 260mm x 30mm x 10mm - 2 pieces

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Vehicle Body Protection and Styling

31

Chrome Detail Trim Subtle styling to highlight & accentuate vehicle body lines These self-adhesive Chrome Detailing Trim Kits can be used to accentuate vehicle body lines or highlight features such as headlights, grilles, vents etc. They can be used internally or externally and each kit is supplied with 8 injection moulded end caps so a professional finish can be achieved. The trim is easy to cut, shape and install and you can choose from 2 different widths: 8mm or 21mm (both are supplied in 5m long rolls).

• Adds an instant and exclusive styling upgrade to any vehicle • Numerous applications for interior and exterior use • Ideal for bumpers, body panel contours and edges, sills, front and rear diffusers, surrounds for headlights, grilles and number plates • Suitable for cars, 4x4s, pick-ups, vans, motorbikes, caravans etc

8mm Chrome Detail Trim Kit 3mm

5 metres

21mm Chrome Detail Trim Kit

Chrome Detail Trim

3mm

8mm

4mm

5 metres

Chrome Detail Trim 21mm

15mm

4mm 10mm

Chrome Detail End Caps

45mm 22mm

Chrome Detail End Caps

KIT CONTAINS: • 1 x 5m roll of 8mm Chrome Detail Trim • 8 x Chromed End Caps • 2 x ‘Surface Cleaner’ Sachets

KIT CONTAINS: • 1 x 5m roll of 21mm Chrome Detail Trim • 8 x Chromed End Caps • 2 x ‘Surface Cleaner’ Sachets

Part No Description CDT-02KIT 8mm Chrome Detail Trim Kit - 5m(L) roll x 8mm(W) + 8 end caps

Part No Description CDT-03KIT 21mm Chrome Detail Trim Kit - 5m(L) roll x 21mm(W) + 8 end caps

End Caps for a professional finish!

End Caps for a professional finish!

x8

x8

HIGHLIGHT RECESSES AND VENTS

AROUND LIGHTS

VEHICLE CONTOUR LINES

FRONT BUMPER DETAIL

BONNET AND PANEL EDGES

FINISHING TOUCH TO PANEL EDGES

SIDE TRIM

LOWER DOOR TRIM

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


32

Vehicle Body Protection and Styling

Chrome Detail Trim Individual Items Chrome Detail Trim Per Metre

Chrome Detail End Caps

Part No CDT-02/1M

Description 1m x 8mm wide Chrome Detailing Trim - per metre

Part No Description CDT-02/END 8 x 8mm wide self adhesive End Caps - bag of 8

Part No CDT-03/1M

Description 1m x 21mm wide Chrome Detailing Trim - per metre

Part No Description CDT-03/END 8 x 21mm wide self adhesive End Caps - bag of 8

Chrome Detail Foil Tape Ultra thin and very versatile this chrome foil tape is ideal for detailing mirror and light surrounds, bumper recesses, grilles and vents etc. It can be used on the exterior and interior and is supplied with a cutter and squeegee. It can be cut and trimmed to shape to be fitted at any angle and allows the installer to achieve a high degree of accuracy when installing. Part No LP07694 LP07695 LP07696 LP07697 LP07698 LP07699

Description Chrome Foil Tape 10m roll (L) x 5mm (W) Chrome Foil Tape 10m roll (L) x 10mm (W) Chrome Foil Tape 10m roll (L) x 20mm (W) Chrome Foil Tape 10m roll (L) x 30mm (W) Chrome Foil Tape 10m roll (L) x 40mm (W) Chrome Foil Tape 10m roll (L) x 50mm (W)

Chrome Styling Trim 5m long roll, 8mm wide. Can be used to accentuate body lines in bumpers and body panels. Simple to fit. Can be used internally and externally. Part No Description CDT-01* Chrome Styling Trim 5m roll (L) x 8mm (W) *Please note the end caps (part no. CDT-02/END) will not fit this product.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Vehicle Body Protection and Styling

33

Chrome Bear Paw Print 2-piece self-adhesive Chrome Bear Paw Print Size: 70mm x 65mm Part No LP07220

Description Chrome Bear Paw Print - 2pcs 70mm x 65mm

Exclusive Chrome Letters, Numbers & Symbols

67mm

High quality chrome self adhesive characters. Sold as individual pieces. Ideal for signs, door numbers, show plates, etc. Great if you want to stand out from the crowd!

58mm

Part No. LP07110 LP07111 LP07112 LP07113 LP07114 LP07115 LP07116 LP07117 LP07118 LP07119 LP07120 LP07121 LP07122 LP07123 LP07124 LP07125 LP07126 LP07127

Description A letter B letter C letter D letter E letter F letter G letter H letter I letter J letter K letter L letter M letter N letter O letter P letter Q letter R letter

Part No. LP07128 LP07129 LP07130 LP07131 LP07132 LP07133 LP07134 LP07135

Description S letter T letter U letter V letter W letter X letter Y letter Z letter

LP07136 LP07137 LP07138 LP07139 LP07140 LP07141 LP07142 LP07143 LP07144 LP07145

0 Number 1 Number 2 Number 3 Number 4 Number 5 Number 6 Number 7 Number 8 Number 9 Number

Part No. LP07146 LP07147 LP07148 LP07149 LP07150 LP07151 LP07152 LP07154 LP07155 LP07156 LP07157

Description & (and symbol) @ (at symbol) ? (question mark) ! (exclamation mark) : : (dots, full stops - 4 pcs)

LP07109

Complete Display Stand with 5 of each character (235 pcs in total)

(inverted commas - 1 pair) (equals/hyphens symbols - 2 pcs) ( ) (brackets - open and closed) + (plus symbol) (phone symbol) (love heart symbol)

Black Vinyl Letters & Numbers

80mm

Can be used for signs, notices, door numbers, etc. Self-adhesive. Quick and easy to install. Sold in packs of 10 characters per bag.

35mm

Part No. LP07962 LP07963 LP07964 LP07965 LP07966 LP07967 LP07968 LP07969 LP07970 LP07971 LP07972 LP07973 LP07974

Description A letter 10 Pcs B letter 10 Pcs C letter 10 Pcs D letter 10 Pcs E letter 10 Pcs F letter 10 Pcs G letter 10 Pcs H letter 10 Pcs I letter 10 Pcs J letter 10 Pcs K letter 10 Pcs L letter 10 Pcs M letter 10 Pcs

LP07961

Complete Display Stand with 10 of each character (360 pcs in total)

Part No. LP07975 LP07976 LP07977 LP07978 LP07979 LP07980 LP07981 LP07982 LP07983 LP07984 LP07985 LP07986 LP07987

Description N letter 10 Pcs O letter 10 Pcs P letter 10 Pcs Q letter 10 Pcs R letter 10 Pcs S letter 10 Pcs T letter 10 Pcs U letter 10 Pcs V letter 10 Pcs W letter 10 Pcs X letter 10 Pcs Y letter 10 Pcs Z letter 10 Pcs

Part No. LP07988 LP07989 LP07990 LP07991 LP07992 LP07993 LP07994 LP07995 LP07996 LP07997

Description 1 Number 10pcs 2 Number 10pcs 3 Number 10pcs 4 Number 10pcs 5 Number 10pcs 6 Number 10pcs 7 Number 10pcs 8 Number 10pcs 9 Number 10pcs 0 Number 10pcs

Size: 80mm high x 35mm wide

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Vehicle Body Protection and Styling

Arch Guard

Sill Guard

Designed to protect bodywork around vulnerable wheel arches. • Available in black or chrome. • Can be used to stop knocks and bumps and to cover up existing damage • A very functional and attractive product • Supplied in a 5m roll • Self-adhesive • Easy to cut and shape

• Protects lower body & paintwork from knocks and scratches • Covers up existing damage • Covers most 4 door vehicles • Easy to cut and shape • Self adhesive easy to fit • Length: 2.36m x 90mm

DOOR SILLS

BUMPER TOPS

Sill Guard has a wide range of uses

Part No AG001 AG001C

Description Arch Guard - black - 5 metre (L) x 16mm (W) Arch Guard - chrome - 5 metre (L) x 16mm (W)

Door Guards

Part No LP20858 LP20859 LP20863

Description Sill Guard - 2.36 metre (L) x 90mm (W)

Transparent Door Guards

LP20858

• Fits both front and rear doors

Part No 607630

4 pieces of tough clear self-adhesive gel moulded door guard. The guard is soft and flexible and the discreet design will not draw attention to the product. It is a simple self-adhesive fit and offers great protection.

LP20859 Supplied in 750mm high blister/card packaging

Description Door Guards - black - 2 piece kit - snap on fit - 650mm (L) Door Guards - clear - 2 piece kit - snap on fit - 650mm (L) Door Guards - clear - 2 piece kit - snap on fit with adhesive - 650mm (L)

Part No LP20621

105mm

34

Description Pack of 4 Transparent Door Guards - 105mm (L) x 14mm (W)

Door Guard - 2 metre roll

4 Piece Door Guards Self-adhesive 4 piece kit. 2 x 98mm 2 x 50mm

Part No DG001 DG001-C

Description Door Guard - black - 2 metre (L) Door Guard - chrome - 2 metre (L)

• Available in black or chrome • Designed to fit along the complete length of the door edge • Fits both front and rear doors • Snap-on fit with adhesive • Length: 2m long roll

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Part No LP20812

Description Door Guards - black - self-adhesive 4 piece - 2 x 98mm, 2 x 50mm (Blister/Card Packaging)


Vehicle Body Protection and Styling

35

Reinforced Self-Gripping Edging Trim Ideal for use on rough or exposed edges that need to be protected or edges that protrude and could cause minor damage and injuries. • The clever self-gripping design ensures that when the trim is installed it stays in position and provides a protective neat uniform finish. • Manufactured from a tough flexible PVC with a steel core embedded in it to ensure durability and long lasting performance. • Can be used on steel, alloy, wood, fibreglass and other composites. • 2 different sizes available. Supplied in 5m roll lengths.

10mm 6mm 13mm

9mm

...on metal or fibreglass body panels

...finishing touch for engine bays

SES002

SES001

Gripping Range 1mm to 4mm 5m Long Roll

Gripping Range 1mm to 7mm 5m Long Roll

APPLICATIONS: Automotive, Industrial, Domestic, General Purpose

Protects Exposed Edges

Multi-Purpose Self-Adhesive Seal Manufactured from a soft and flexible D-Shaped rubber with a hollow centre for maximum compression. • Offers extra sealing protection to prevent rattles and squeaks and stops dirt, dust and moisture. • Easy to cut and fit. • Self-adhesive using a strong industrial grade adhesive tape. • Can act as a gasket/seal against wind noise. Resistant to oil. • 3 different sizes available. Supplied in 10m roll lengths. • Will stick to metal, glass, masonry and most composites and plastics.

NUMEROUS APPLICATIONS: Ideal for use on vehicle door shuts, body panels, boot, bonnet and internal trim. Domestic & industrial doors and windows. Boats, caravans, trailers

Door & window frames

On vehicle doors

13mm 7mm

6mm

SEA001

10m Long Roll

Base of garage doors

14mm

10mm

8mm

SEA002

10m Long Roll

SEA003

10m Long Roll

Provides a waterproof and dustproof seal for boot and bonnet shuts

Reinforced Self-Gripping Sealing Trim Designed for use around door, boot and tailgate edges to create a weatherproof seal. Applications: Automotive, Industrial, Domestic, General Purpose • The self-grip design ensures that the trim stays in position when installed • Manufactured from a tough flexible PVC with a steel core embedded in it to ensure durability and long lasting performance. • Supplied in 5m roll lengths • 2 different designs available

SES003

Gripping Range: 1mm to 7mm 5m Long Roll

SES004

Gripping Range: 1mm to 4mm 5m Long Roll

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


36

Vehicle Body Protection and Styling

Transparent Protection Film This E-TECH clear protection film is virtually invisible and ideal for protecting against everyday wear and tear. Specially designed to be fitted to prominent or protruding bodywork that is prone to damage from stone chips, bugs, minor scuffs and scratches.

• Protects paint from stone chips, insect damage, minor scuffs and weathering • Ideal for protecting protruding edges and vulnerable areas • Simple to install and cut to shape • Helps prevent annoying scratches • Helps maintain resale value

ROLL SIZE: 12.5cm wide x 3m long Part No EDF04TP

Description Transparent Protection Film

LOWER TRIM

• Numerous applications: cars, bicycles, motor bikes, boats, 4x4s, pick-ups or any painted surfaces • Ideal for vulnerable areas where roof racks, bike racks or other accessories come into contact with vehicle paintwork KIT CONTAINS: • 1 x Roll of Transparent film • 2 x Cleaning sachets • 1 x Squeegee • 1 x Fitting Instructions

FRONTAL PROTECTION

Ideal protection for your favourite gadgets

FUEL TANKS

REAR BUMPER TOPS

Ideal for cars, pick-ups, 4x4s, motorbikes, bicycles, boats etc.

IDEAL FOR

ANY CAR

IDEAL FOR

MOTOR BIKES

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

IDEAL FOR

BIKES


Vehicle Body Protection and Styling

37

Surface Protection Film Kit This clear self-adhesive PVC film is ideal for protecting your vehicle’s body work from those annoying little scratches and stone chips. The water based adhesive allows the product to be removed with little or no residue. Designed for use on door handles, side skirts, bumpers and any other vulnerable exposed surface. Helps protect from stone chips, insect damage, minor scuffs and weathering. • Ideal for protecting protruding edges and vulnerable areas • Simple to install and remove • Can be used on cars, bicycles, motor bikes, boats, etc Kit Contents: • 2 different film sheet sizes (2x 1.40m x 20cm and 1x 1.40mx30cm) • 1 x Squeegee • 1 x Film cutter

Part No LP75031

Description Surface Protection Film Kit

Spray-On Transparent Protection Film

REMOVABLE The Invisible Paint Protector Developed to protect exposed and vulnerable surfaces that are prone to damage by stone chips, road debris, insects and minor scuffs and scratches.

CARS

BIKES

MOTORCYCLES

L A T S Y R C LEAR C

Self-levelling formula. Easy to apply & remove if film is damaged, simply peel off and respray. Ideal for protecting paintwork on: • Front bumpers, spoilers & splitters • Bonnets • Door sills • Wing mirrors • Rear bumper tops • Wheel arches • Rear valances and diffusers Part No Description ER00162 Spray On Transparent Protection Film - 400ml

Mini Side Body Moulding Kit Manufactured from strong lightweight polyurethane and made to ISO9000 standards. Supplied in a black finish but can be painted if required. An ideal way to help protect your vehicle from those everyday knocks and bumps that can happen any where, at any time. • Fits all new Mini One and Clubman models Mk1 & Mk2 2001>2014 • Tailor made for a perfect fit • Self-adhesive, quick and easy to fit (no drilling required) • Saves on costly dent repairs and helps maintain resale value “Looks like an original equipment fitted accessory”

Part No RYF-25

Description Mini One Side Body Moulding Kit 2001>2014

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


38

Vehicle Body Protection and Styling

Technik Detail Film This E-TECH Technik Detail Film is a high quality durable film that is ideal for personalising, styling and protecting a variety of surfaces on your vehicle or bike. The film will protect panels and painted surfaces from scuffs and scratches and is ideal for adding a personal touch to any car, 4x4, pick-up or bike. • Adds an instant styling upgrade to any surface • Self-adhesive, easy to fit and cut to shape • Protects paint and bodywork from scuffs & scratches • Can be used to cover up existing damage

4 FINISHES AVAILABLE

3D CARBON EFFECT

BRUSHED ALLOY EFFECT

TEXTURED BLACK

CHROME EFFECT

Numerous applications for interior and exterior use: Door Sills, Fuel Flaps, Rear Bumper Tops, Instrument Panels, Consoles, Door Pillars, Vents & Ducts, Ideal for any flat or single curved surface that needs a styling upgrade ROLL SIZE: 12.5cm wide x 3m long Part No EDF01BK EDF02CR EDF03BS EDF05CH

Description Textured Black 3D Carbon Effect Brushed Alloy Effect Chrome Effect

REAR BUMPER TOPS DOOR PILLARS DOOR PILLARS

REAR BUMPER TOPS

DOOR SILLS

KIT CONTAINS: • 1 x Roll of Technik Detail film • 2 x Cleaning sachets • 1 x Squeegee • 1 x Fitting Instructions

STYLING DETAIL

Ideal for cars, pick-ups, 4x4s, motorbikes, bicycles, boats etc. FUEL CAPS

IDEAL FOR

ANY CAR

IDEAL FOR

MOTOR BIKES

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

IDEAL FOR

BIKES


Number Plate Holders and Accessories

Number Plate Holders

Perfect styling accessory to add an exclusive touch to any UK standard sized (520mm long x 100mm wide) number plate. We have 2 exclusive designs: one in stainless steel and the other in a tough black ABS plastic. Both have been developed specifically to fit UK number plates and both feature a multi-holed fitting design to give numerous mounting options. They can be fitted to the front or rear of most vehicles. Also ideal for caravans, trailers, trailer boards, cycle racks etc.

Stainless Steel NEW CLASSIC DESIGN A new classic design with deep radiused corners will suit most vehicles from any era and adds a touch of class to any number plate. Manufactured from T304 Stainless Steel and guaranteed not to rust. No flaking or pitting as with chrome plated versions.

Part No Description NPO1SS Stainless Steel Number Plate Holder Supplied in a bag with colour header card.

Black ABS Manufactured from tough durable black ABS featuring our unique multi-holed fixing design offering numerous mounting positions. Can be painted to suit.

Part No Description NPO1B Black ABS Number Plate Holder Supplied in a bag with colour header card.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

39


40

Number Plate Holders and Accessories

Spring Loaded Quick Release Number Plate Clip The Spring Loaded Number Plate Clip is ideal for any application where number plates are changed on a regular basis i.e. caravans, trailer boards, show cars or to prevent number plate theft. • Designed to fit all standard size UK number plates • Manufactured from a strong durable plastic • Supplied in pairs with fixings enabling them to be mounted to most surfaces • Adjustable between 100mm to 120mm

Part No LP98084

Description Spring Loaded Number Plate Clip (pair)

Number Plate Security Screw Kit With vehicle identity theft on the increase these ultra high security fixings help prevent the theft of your front and rear number plate. If your number plate is stolen, not only do you have the cost of replacing it you also have the inconvenience of possibly being accused of speeding, illegal parking and dodging congestion charges etc. To prove your innocence will be costly and time consuming. • Can be used on any number plate on any vehicle • Enough for both front and rear plates • No special tools required for fitting • Very difficult and time consuming to remove. Kit contents: 4 x self tapping security screws, 4 x cap washers, 4 x black caps, 2 x blue caps, 2 x yellow caps, 2 x white caps to match every number plate colour.

VEHICLE IDENTITY THEFT IS ON THE INCREASE!

Part No ESS1

Description Number Plate Security Kit

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Seat & Interior Protection PROTECTS AGAINST PETS

FOOD & DRINK

• EXTREMELY TOUGH AND HARD WEARING • PROTECTS SEATS FROM ALL TYPES OF DIRT • COVERS COMPLETE SEAT - FRONT & BACK • SIMPLE TO FIT AND REMOVE

DIRT/GREASE

WEAR & TEAR

!

• EASY TO WIPE CLEAN • REDUCES SEAT WEAR AND TEAR WHICH HELPS INCREASE VEHICLE RESALE VALUE • SEAT BELT FITTING AND SEAT ADJUSTMENT HANDLES ARE NOT OBSTRUCTED

Heavyweight seat protectors can be used over and over again and will provide guaranteed protection for your vehicle’s interior. Comfortable, simple to install and remove, manufactured to the highest standards and when fitted protect your seats from every day wear and tear which will help maintain the resale value of your vehicle. The seat protectors are ideal if you are transporting pets or other items that could dirty or damage the interior of your vehicle. Also they will not impede the seat belts and when not in use can be rolled into a small compact bundle for storage.

Front Seat Protector with vented sides • Vented sides for access to arm rests and seat controls. • Elasticated base secures seat protector in position and allows easy access to seat adjustment mechanism and prevent it from being pulled out of shape.

41

STANDARD SIZE Elasticated Base

DUAL FABRIC DESIGN Heavy duty woven base material offers long lasting protection to the area that gets the most wear and tear - the seat base!

Part No SC1-V

Description Front Seat Protector with vented sides - standard size - black

Universal Front Seat Protector

STANDARD SIZE

• Elasticated base to keep protector in position

Part No SC1

Elasticated Base

Description Universal Front Seat Protector - standard size - black

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


42

Seat & Interior Protection

Universal Front Seat Protector

XL SIZE

• XL size is ideal for large seats often found in 4x4s, luxury saloons and people carriers, which generally have larger front seats and deeper cushions • Elasticated base to keep protector in position

Elasticated Base

Part No SC1-XL

Description Universal Front Seat Protector - XL size - black

Universal Twin Front Seat Protector • Ideal for most vans and pick-ups with double passenger seats • Seat belt fittings and seat adjustment can still be accessed • Elasticated base to keep protector in position

Elasticated Base Part No SC2

Description Twin Front Seat Protector - black

Universal Rear Seat Protector • Hook and loop top seam to allow adjustment and a tidy fit around headrests • Elasticated base with part elasticated back to accommodate the majority of rear seat shapes • Two extra long securing straps to allow adjustment and secure fitting of your vehicle. Part No SC3

Description Universal Rear Seat Protector - black

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Seat & Interior Protection

43

Front Seat Protector

LITE

PAIR (2pcs)

• Manufactured from a high density nylon to protect seats from general wear and tear • Covers complete seat - easy to fit and remove • Features elasticated base and anchors straps with clips for a secure fitment • Ideal for compact glove box storage so always to hand when needed

Elasticated Base

Elasticated anchor straps around the base of the seat protector help secure it in position

Part No SC4

Description ‘Lite’ Heavyweight Front Seat Protectors - black - pair (2 pcs)

Boot and Cargo Rear Protector

88cm

Fits large or small boot/cargo areas. Suitable for cars, hatchbacks, 4x4s, estates etc. • Offers great protection for boot and cargo area including the backs of rear seats. • Made from hard wearing durable, tough, water resistant material. • Suitable for use with rear seats up or folded down. • Easy to install & remove. Quick release straps attach around rear seat headrest posts for secure installation and quick and easy removal.

12

Design incorporates a flap to protect bumper tops from damage when loading/unloading.

62cm

103cm

27cm

32cm 167cm

310mm

185cm

96cm

380mm

Part No BCP01

Folds into a neat small bundle for easy storage.

Description Boot and Cargo Rear Protector - Black

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


44

Seat & Interior Protection

Boot Protector Mat with Anti-Slip Backing Waterproof anti-slip Boot Protector Mat that can be easily cut to fit the cargo area. The anti-slip design helps to keep the mat in place and also prevents the boot contents from moving around whilst driving. Easy to clean, install and remove. Dimensions: 120cm x 100cm Colour: Black Part No LP24038

Description Boot Protector Mat with Anti-Slip Backing

3 Piece Mat Set Universal 3 Piece Mat Set ideal for pickups, vans, people carriers, MPVs etc. The single piece rear mat is designed to either go over tunnels or be trimmed to fit in the rear passenger compartment. The trim lines in each mat allow for easy shaping to get the required fit. Manufactured from low odour black PVC with an anti slip stippled back. Front Mat Size - 48cm x 73cm Rear Mat Size - 141cm x 41cm Part No LP26516

Description Universal 3 Piece Mat Set

EASY TO TRIM FOR A PERFECT FIT

1 Piece Universal Rear Mat Universal Rear Mat ideal for pickups, vans, people carriers, MPVs etc. Designed to go over tunnels in the rear passenger compartment of vans, pick-ups etc. Can be easily trimmed using the trim lines to get the required shape. Manufactured from low odour easy to clean black PVC with an anti slip stippled back. Mat measurements 141cm x 41cm (1 piece supplied) Part No LP26517

Description Universal Rear Mat - 141cm x 41cm - 1 piece

EASY TO TRIM FOR A PERFECT FIT

Floor Mat Anchor Clips For use on any rubber or carpet mat to keep them in position. 2 pieces secure mat in postion. Easy to install. Part No LP24799

Description Floor Mat Anchor Clips (Pair)

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Mat Bag & Car Covers

45

2-in-1 Multi-Purpose Mat & Bag Can be used as a Multi Purpose mat or bag for: • Picnics • Camping • Cars • On the beach • Parties • Gardening • Travelling • Can be used as a boot mat/general purpose ground mat - as well as a carrying bag. • Ideal for such uses as going to the beach, picnics, fishing, camping, festivals, etc. • Fold it in half and zip up the sides, it then transforms into a large and versatile washable bag that can be used for carrying anything that will fit in it! Waterproof Material

Folds up into a small compact bundle that will even fit into the glove box of your car!

Reinforced Corner Eyelets

710mm

890mm

Folded up: 39cm x 22cm x 6cm approx

1420mm

Ultra Strong Carrying Handles

Easy to Clean and wipe down

Carrying Bag

Dimensions: As a bag (zipped up): 71cm x 89cm As a mat (unzipped flat): 142cm x 89cm Part No MMB1

Heavy Duty Side Zips

890mm

Description 2-in-1 Multi-Purpose Mat & Bag

Car Boot Liner/Mat

Waste/Recycling Bag

Ideal for camping and festivals

Clear Polythene Car Covers Protects Against: Rain and moisture Snow and frost Air borne dust and pollution

Great vehicle protection at a very economical price!

Used for professional repair and restoration work

•3 sizes available, each with an elasticated base for a secure fit • Can be used indoors or outdoors • Quick and easy to install and remove and can be folded up into a small bundle • Protects against the elements and weathering

Part No LP53004 LP53005 LP53006

Description SMALL 6m(L) x 3.5m(W) MEDIUM 6.6m(L) x 3.8m(W) LARGE 7.5m(L) x 4.8m(W)

If you are doing any repair work or restoration to a vehicle and want to quickly cover it to protect it from overspray etc: simply put the cover over the car, cut a hole where the damage is, mask around it to keep it in place, and the rest of your car is completely protected.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


46

Polished Stainless Steel Exhaust Tips We have a wide range of up-to-date modern, creatively styled exhaust tips to choose from that give the appearance of an expensive exhaust system at the fraction of the cost. • All our exhaust tips are polished stainless steel and guaranteed not to rust • All exhaust tips are supplied with a secure bolt, clip or clamp fixing method and simply slide over the original exhaust pipe* • Simple and easy to install with no welding or drilling required *In some cases if the standard exhaust is not straight at the end you may need to cut a length off to achieve a satisfactory fit.

Round Classic 3 SIZES AVAILABLE

Streamline Rolled End 3 SIZES AVAILABLE

FT12820S

FT12820

Part No TP03 TP02 TP01

ALL CLIP FIXING Description SMALL - fits over standard exhaust sizes 30mm - 45mm MEDIUM - fits over standard exhaust sizes 45mm - 55mm LARGE - fits over standard exhaust sizes 55mm - 65mm

Magnum Round

Part No FT12820S FT12820 FT12820L

FT12820L ALL CLIP FIXING Description SMALL - fits over standard exhaust sizes 36-46mm MEDIUM - fits over standard exhaust sizes 36-56mm LARGE - fits over standard exhaust sizes 47-66mm

Tornado Twin Round

• Fits over standard exhaust sizes 48-62mm

• Fits over standard exhaust sizes 48-63mm CLAMP FIXING

Part No FT714A4 Part No FT712.4

RS Round

CLAMP FIXING

Evo Square

• Fits over standard exhaust sizes 48-65mm Part No FT19950B

2 SIZES AVAILABLE

BOLT FIXING

SMALL Part No FT76500B FT76600B

BOLT FIXING

LARGE

Description Small - fits over standard exhaust sizes between 40-50mm Large - fits over standard exhaust sizes between 50-58mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Polished Stainless Steel Exhaust Tips

47

Cossie Oval

Blow Down

2 SIZES AVAILABLE

• Fits over standard exhaust sizes 32-46mm

Part No FT71500B FT71600B

BOLT FIXING Description Fits over standard exhaust sizes between 40-50mm Large - fits over standard exhaust sizes between 50-60mm

Twin Oval • Fits over standard exhaust sizes 48-61mm

Part No LP60130

BOLT FIXING

Blow Down 2 • Fits over standard exhaust sizes 50-68mm Will fit over 70mm OD pipes but you will need to remove the fixing clip and attach by welding. Part No FT60130L

Part No FT757.4

CLIP FIXING

CLAMP FIXING

Drop Down 2

V6 Oval

45° bend • Fits over standard exhaust sizes 48-64mm

• Fits over standard exhaust sizes 35-68mm Part No FT1011023 CLAMP FIXING

Part No FT60100B

M Type Oval

Drop Down 3

• Fits over standard exhaust sizes 50-65mm

70° bend

Part No LP60002 CLIP FIXING

CLAMP FIXING

Part No FT229501

• Fits over standard exhaust sizes 30-47mm BOLT FIXING

Dynamic Oval IDEAL FOR SLIDING OVER LARGE OR UNUSUAL SHAPED EXHAUST PIPE ENDS

Dynamic Oval P

• Fits over standard exhaust sizes 55-80mm

FITTED WITH A FRONT PLATE - IDEAL FOR SLIDING OVER LARGE OR UNUSUAL SHAPED EXHAUST PIPE ENDS

Part No FT700S

• Fits over standard exhaust sizes 55-80mm

BOLT FIXING

Magnum Big Bore

Part No FT700P

• Fits over standard exhaust sizes 48-62mm

CLAMP FIXING

BOLT FIXING

Part No FT716A4

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


48

Exhaust Accessories

Heavy Duty Adjustable Pipe Joiners/Connectors (coupler sleeves) Designed to join same diameter pipes and tubes together without the need for any welding.

HEAVY DUTY

Manufactured to be inserted between equal diameter pipe sections to provide a secure and strong join. Ideal for joining new pipe sections or repairing damaged/holed sections. Heavy duty construction for strength and durabiity. Zinc plated for corrosion resistance and long lasting performance. Quick and easy to install. No special tools required.

A

L

Guide showing which Joiners will fit our Universal Pipes as shown on page 49.

Just select the part number with the correct diameter Ø and length for your particular application. A

Part No. EC001 EC002 EC003 EC004 EC005 EC006 EC007 EC008 EC009 EC010 EC011 EC012 EC013 EC014 EC015 EC016

Adjustable Between Smallest Dia Ø Largest Dia Ø 34mm 36mm 38mm 41mm 41mm 43mm 43mm 44mm 45mm 48mm 48mm 53mm 53mm 57mm 58mm 66mm

36mm 38mm 40mm 43mm 43mm 45mm 45mm 46mm 48mm 50mm 50mm 55mm 55mm 60mm 60mm 69.5mm

FITTED IN 3 EASY STEPS...

L

Length 90mm 90mm 125mm 90mm 125mm 80mm 125mm 90mm 90mm 80mm 125mm 80mm 125mm 95mm 130mm 125mm

Short Straight Pipe

Long Straight Pipe

Reducer Pipe

90° Bent Pipe

- - - EX-ST38 EX-STL38 EX-RDC3846 EX9038 - - - EX-ST42 EX-STL42 EX-RDC4249 EX9042 EX-ST42 EX-STL42 EX-RDC4249 EX9042 EX-ST45 EX-STL45 EX-RDC4552 EX9045 EX-ST45 EX-STL45 EX-RDC4552 EX9045 - - EX-RDC4552 EX-ST48 EX-STL48 EX-RDC4854 EX-ST50 EX-STL50 EX-RDC5059 EX9050 EX-ST50 EX-STL50 EX-RDC5059 EX9050 EX-ST54 EX-STL54 EX-RDC5461 EX9054 EX-ST54 EX-STL54 EX-RDC5461 EX9054 EX-ST60 EX-STL60 EX-RDC6069 EX9060 EX-ST60 EX-STL60 EX-RDC6069 EX9060 - - - -

Please Note: A jointing compound should be used to help create a gas tight seal

1

2

Match up pipe/tube diameter with joiner part number of similar size.

3

Loosen off the joiner clamp brackets and insert pipes/tubes into the joiner connector ends.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Centralise the joiner and tighten all fixings.


Exhaust Accessories

49

Universal Exhaust Pipe Sections Designed for race and rally, off road or road use, these high quality aluminised mild steel exhaust pipe sections offer excellent strength and durability. They are ideal for any minor or major DIY repairs or modifications and are suitable for all types of exhaust systems. One end of the straight section has been swaged and enlarged so it can be sleeved neatly into the other end of a pipe and joined by clamping up or welding together. • Wide range of shapes and sizes • 1.5mm wall thickness • Easy to cut and shape • Can be welded or clamped into position • Suitable for all types of exhaust applications

Short Straight Pipe I.D

O.D

1.5mm Wall thickness

Long Straight Pipe

I.D

O.D

1.5mm Wall thickness

Straight Reducer Pipe I.D

170mm to 175mm Long 1.5mm Wall thickness

B

B I.D

1.5mm Wall thickness

O.D

A Large End I.D Ø (mm) 39 43 46 49 51 55.5 61 65

B Small End O.D Ø (mm) 38 (1 1/2”) 42 (1 5/8”) 45 (1 3/4”) 48 (1 7/8”) 50 (2”) 54 (2 1/8”) 60 (2 3/8”) 63.5 (2 1/2”)

Pipe Length 180mm 180mm 180mm 180mm 180mm 180mm 180mm 180mm

Wall Thickness 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm

Part No EX-STL38 EX-STL42 EX-STL45 EX-STL48 EX-STL50 EX-STL54 EX-STL60 EX-STL63.5

A Large End I.D Ø (mm) 39 43 46 49 51 55.5 61 65

B Small End O.D Ø (mm) 38 (1 1/2”) 42 (1 5/8”) 45 (1 3/4”) 48 (1 7/8”) 50 (2”) 54 (2 1/8”) 60 (2 3/8”) 63.5 (2 1/2”)

Pipe Length 500mm 500mm 500mm 500mm 500mm 500mm 500mm 500mm

Wall Thickness 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm

B Small End O.D Ø (mm) 35 (1 3/4”) 38 (1 1/2”) 42 (1 5/8”) 45 (1 3/4”) 48 (1 7/8”) 50 (2”) 54 (2 1/8”) 60 (2 3/8”)

Pipe Length 170mm 170mm 175mm 175mm 175mm 170mm 175mm 175mm

Wall Thickness 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm

Pipe B Bend Pipe Length 90° 170x170mm 90° 170x170mm 90° 175x175mm 90° 175x175mm 90° 180x180mm 90° 245x245mm 90° 255x255mm 90° 255x255mm

Wall Thickness 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm 1.5mm

A Large End I.D Ø Part No (mm) EX-RDC3542 39 EX-RDC3846 43 EX-RDC4249 46 EX-RDC4552 49 EX-RDC4854 51 EX-RDC5059 56 EX-RDC5461 58 EX-RDC6069 66

O.D

90° Bent Pipe

Part No EX-ST38 EX-ST42 EX-ST45 EX-ST48 EX-ST50 EX-ST54 EX-ST60 EX-ST63.5

Part No EX-9038 EX-9042 EX-9045 EX-9050 EX-9054 EX-9060 EX-9064 EX-9076

A Pipe I.D Ø (mm) 35 39 42 47 54 57 64 73

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


50

Exhaust Accessories

Flexible Exhaust Connectors (FEC) Our comprehensive range of FECs are engineered to withstand the extremely corrosive and hostile exhaust system environment. They are manufactured from a 2-ply braided stainless steel STS304material with aluminium coated steel end sleeves. Designed to be inserted and welded into any section of an exhaust system, they then absorb vibration and prevent it running down the length of the pipe work. This helps reduce fatigue and failure and extends the life and performance of any exhaust system. We have 2 designs available and both are internally lined to withstand very high temperatures (up to 1000°C). This allows fitment high up on any system near the catalyst or manifold. The lining also prevents whistling and creates an air space within the inner and outer ply which helps cool exhaust gases and improve air flow.

CHARACTERISTICS

• Flexible and extremely strong • Corrosive resistant • Compensate for any exhaust misalignment • Helps reduce noise and eliminates knocking • Excellent for solving any problem exhaust fitment/issues • Wide range of sizes and lengths

WITH TWIN STEPPED END with inner braided lining Overall Length 300mm Part No 50 - 200 60 - 200

Description 50mm & 45mm O.D. End Sleeve 60mm & 55mm O.D. End Sleeve

WITH EXTENDED END SLEEVE with inner braided lining

*Add approx 50mm for each extended end sleeve.

I.D Ø Part No (mm)

Length of Braided Section without end sleeve (mm) (“)

I.D Ø Part No (mm)

Length of Braided Section without end sleeve (mm) (“)

FP11206HDN FP13404HDN FP13406HDN FP20004HDN FP20006HDN FP21604HDN FP21606HDN FP21404HDN FP21406HDN FP23604HDN

152mm 102mm 152mm 102mm 152mm 102mm 152mm 102mm 152mm 102mm

FP23606HDN FP21204HDN FP21206HDN FP30004HDN FP30006HDN FP31204HDN FP31208HDN FP40004HDN FP40008HDN

60 63 63 76 76 90 90 100 100

152mm 102mm 152mm 102mm 152mm 102mm 203mm 102mm 203mm

38 45 45 51 51 55 55 57 57 60

(6”) (4”) (6”) (4”) (6”) (4”) (6”) (4”) (6”) (4”)

(6”) (4”) (6”) (4”) (6”) (4”) (8”) (4”) (8”)

WITH STANDARD END SLEEVE with inner braided lining Part No

I.D Ø (mm)

Overall Pipe Length (mm) (“)

Part No

I.D Ø (mm)

Overall Pipe Length (mm) (“)

FP11406HD FP11206HD FP13404HD FP13406HD FP13408HD FP20004HD FP20006HD FP20008HD FP21604HD FP21606HD FP21608HD FP21404HD

32 38 45 45 45 51 51 51 55 55 55 57

152mm 152mm 102mm 152mm 203mm 102mm 152mm 203mm 102mm 152mm 203mm 102mm

FP21406HD FP21408HD FP23604HD FP23606HD FP23608HD FP21204HD FP21206HD FP21208HD FP30008HD FP31206HD FP40006HD

57 57 60 60 60 63 63 63 76 90 100

152mm 203mm 102mm 152mm 203mm 102mm 152mm 203mm 203mm 152mm 152mm

(6”) (6”) (4”) (6”) (8”) (4”) (6”) (8”) (4”) (6”) (8”) (4”)

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

(6”) (8”) (4”) (6”) (8”) (4”) (6”) (8”) (8”) (6”) (6”)


Exhaust Accessories

51

6 Step Pipe Reducer This universal pipe reducer is a must for anybody who attempts to fit an exhaust system. Manufactured from steel it is easy to cut and weld and ideal for adapting and joining different diameter pipes. This one product can come to the rescue immediately and help any DIY enthusiast to fit an exhaust system. 6 different diameters (external): 50mm, 55mm, 60mm, 65mm, 70mm, 75mm Depth of each step: 24mm Part No EX-RDC-01

Description 6 Step Pipe Reducer

Heavy Duty Universal Exhaust Mounts HR009

Rubber Knuckle Joint

VIBRATION ABSORBING FLEXIBLE RUBBER SHAFT

HR005 2 PIECE KIT

HR008

‘Hook’ support Part No: HR009

Part No: HR004

Multidrilled universal exhaust mount with a steel shaft and a rubber knuckle joint. (1 piece)

Heavy duty universal black rubber exhaust mount. (3 piece kit)

Part No: HR008

78mm

30mm 13mmØ

41mm

HR004 3 PIECE KIT

45mm

Part No: HR005

190mm

• Energy and vibration absorbing designs help eliminate knocking and stabilise the exhaust system.

Heavy duty universal black rubber exhaust mount. (2 piece kit) 25mm

30mm 110mm

Description Black Rubber Exhaust Mount - 3 pieces per pack Black Rubber Exhaust Mount - 2 pieces per pack Heavy Duty Exhaust Mount - Steel Hook with Flexible Rubber Support Heavy Duty Exhaust Mount - Steel Hook with Rubber Knuckle Joint

12mmØ

Part No HR004 HR005 HR008 HR009

x3

230mm

• Each mount provides a number of different fitting options which can be cut, trimmed, drilled or bent to suit most requirements.

27mm

25mm

Multidrilled universal exhaust mount with a rubber shaft and a pivoting steel bracket. (1 piece)

Ideal for securing back boxes, silencers, partial or full exhaust systems. • Manufactured from high density rubber and steel for strength and durability

x2

x2

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Heat Protection Products

Embossed Alloy Heatshield Sheet A lightweight embossed single layer aluminium sheet that is ideal for reflecting radiant heat away from engine components. The sheet is highly thermal efficient and easy to form so it can be shaped to suit most requirements. The sheet’s manufacturing process means that it is very light and strong making it ideal for manifolds, exhausts, spare wheel wells, under floor protection from exhausts and catalytic converters, bulkheads and numerous other engine bay applications. • Reflects and helps disipate radiant heat • Easy to form, cut and shape • Sheets can be folded or riveted together to create a twin layer barrier Part No EAHS-01

FORMED TO BULKHEAD SHAPE

Description Embossed Alloy Heatshield Sheet 560x407mm

BONDED INTO TOP OF CARBON FIBRE SHEET

560mm

52

Extremely flexible, easy to shape, cut and rivet

407mm

Heatwrap (non-coated) - Heat rated to 550°C approx Fibre glass woven exhaust wrap, heat rated to 550°C (approx). 5m long, available in 3 sizes: 1”, 2” & 4” widths. Part No EEW1 EEW2 EEW4

Description 5m long x 25mm wide (1”) White 5m long x 50mm wide (2”) White 5m long x 100mm wide (4”) White

Heatwrap helps increase horsepower by retaining the hot gases, while decreasing their density, thus allowing them to exit the system faster. It also reduces radiant heat damage and under bonnet temperatures by as much as 50%.

Heatwrap with Stainless Steel Ties Fibre glass woven exhaust wrap, heat rated to 550°C (approx). 5m long, available in 3 sizes: 1”, 2” & 4” widths. Each roll is supplied with 8 stainless steel ties 362mm long. Part No EEW1X8SS EEW2X8SS EEW4X8SS

Description 5m long x 25mm wide (1”) White with 8 ties 5m long x 50mm wide (2”) White with 8 ties 5m long x 100mm wide (4”) White with 8 ties

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Heat Protection Products

53

Premium Titanium Coloured Heatwrap Heat Rated to 649°C (1200°F)

Our Premium Titanium Coloured Heatwrap features a tight weave which helps retain more heat and frays less. Can withstand temperatures of 649°C (1200°F) continuously and intermittent temperatures of 1093°C (2000°F) Part No Description EEW2T 50mm (2”) wide x 5m (16.4’) long LMA250T 50mm (2”) wide x 15m (50’) long roll

Multi-Purpose Stainless Steel Cable Ties Multi-purpose Stainless Steel Cable Ties ideal for securing exhaust wrap.

• Quick and easy to install • Ultra strong, unique locking mechanism

• Corrosion resistant • Slim profile for use in confined spaces • Can withstand very high temperatures and diverse weather conditions • Ideal for use in the engine bay Part No 450201 450362 800362

Description Length: 201mm (8”) Pack of 4 Length: 362mm (14”) Pack of 4 Length: 521mm (20”) Pack of 4

Universal Cone Air Filter Heat Reflector Shields Manufactured from T304 Stainless Steel, these universal flexible heatshields are designed to fit around most cone shaped air filters ranging in sizes from 50mm up to 120mm (inlet hole size). The purpose of a heatshield is to deflect hot air and radiant heat from being sucked into your engine. The shield helps reflect the heat and allow cooler air to pass under it through the filter. Simple to fit, no drilling required. Part No HS-01 HS-02 HS-03

Description Standard size for most cone filters - 140mm long x 330mm wide XL size ideal for large cone filters - 220mm long x 330mm wide Small size ideal for most “breather” filters - 55mm x 100mm Length

Width

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


54

Air Filters & Accessories

Univeral Twin Cone Air Filters These filters have great filtering capacity, are very well constructed and strong enough to withstand the harshest environments. They are ideal for anybody looking for a durable cone filter at a very good price. They are of a twin cone design for maximum air flow, have a chrome top, red cotton gauze and supplied with a fixing clip. Sizes as listed below. Part No Inlet Dia Ø WS-002-5 60mm WS-001-2 65mm WS-001-3 70mm WS-001-1 75mm WS-001-5 80/90mm* WS-001-4 85/90mm* WS-001-5 90/80mm* *Fitted with a reducer ring.

Length 150mm 150mm 150mm 150mm 150mm 150mm 150mm

HP Rating 140HP 170HP 170HP 170HP 170HP 170HP 170HP

ULTRA WIDE INLET DIAMETER FOR MAXIMUM AIRFLOW Part No WS-H100 WS-H115 WS-H150

Inlet Dia Ø 100mm 115mm 150mm

Length 150mm 150mm 150mm

HP Rating 400HP 400HP 400HP

Breather Air Filters We have a range of breather filters available in different sizes to suit most applications. Made from a high quality red cotton gauze with a detachable mounting connector so they are easy to install and remove for cleaning. Can be mounted directly to engine block or hoses depending upon application.

Red Cotton Breather

+

Part No L13123 M14123 N15123 O16123 P17123 Q18123

Inlet Dia Ø 25mm 20mm 18mm 15mm 12mm 9mm

Cotton Reel Anti Vibration Bush 20mm

50mm

‘Cotton Reel’ bush with 20mm rubber centre ideal for helping absorb vibration and movement from engines and motors. Supplied with 2 x M6 nyloc nuts and washers.

Part No 2500C0T

Description Cotton Reel Bush with Rubber Centre

Uni Bracket Manufactured from thin stainless steel with a series of holes and slots punched along its entire length. This bracket can be bent and formed into any shape by hand and is ideal for adding extra support or strength to any cone filter or induction piping that you feel may need it. (Nuts and bolts not supplied). Part No UB1

Description Universal Stainless Steel Bracket

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Air Filters & Accessories

55

Alloy Tubes We offer a range of universal alloy tubes for anyone who wants to construct thier own induction system or modify their original one. The tubes are available in a range of different diameters and 3 different shapes: 45º bend, 90º bend and straight sections. The tubes will not be affected by the conditions in the engine bay. Please note these tubes should only be used for air filter applications. Supplied in a bright finish and can be cut to desired lengths.

Straight Pipe

45° Bend Pipe

90° Bend Pipe

Outside Ø Diameter Part No

Length

Wall Thickness

Material

50mm 70mm 75mm

300mm 300mm 300mm

1mm 1mm 1mm

Alloy Alloy Alloy

Outside Ø Diameter Part No

Length

Wall Thickness

Material

50mm 60mm 70mm 75mm

AP45-50 AP45-60 AP45-70 AP45-75

150mm x 150mm 150mm x 150mm 150mm x 150mm 150mm x 150mm

1mm 1mm 1mm 1mm

Alloy Alloy Alloy Alloy

Outside Ø Diameter

Part No

Length

Wall Thickness

Material

50mm 60mm 70mm 75mm 80mm 89mm

AP90-50 AP90-60 AP90-70 AP90-75 AP90-80 AP90-89

150mm x 150mm 150mm x 150mm 150mm x 150mm 150mm x 150mm 150mm x 150mm 150mm x 150mm

1mm 1mm 1mm 1mm 1mm 1mm

Alloy Alloy Alloy Alloy Alloy Alloy

APSP-50 APSP-70 APSP-75

Steel Sleeves When inserted inside rubber and silicone tubing or hoses they provide a firm point for tightening up fixing clips. They can also be used to extend hoses, tubes and pipes over small distances if required. See below for all dimensions and part numbers.

Outside Diameter Ø Length Part No 50 mm 50 mm 60 mm 60 mm 70 mm 70 mm 76 mm 76 mm 80 mm 80 mm

20 mm 50 mm 20 mm 50 mm 20 mm 50 mm 20 mm 50 mm 20 mm 50 mm

M2D50 M5D50 M2D60 M5D60 M2D70 M5D70 M2D76 M5D76 M2D80 M5D80

Outside Diameter Ø

Length

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


56

Silicone Hoses

Straight 250mm & 1 metre lengths of silicone hosing We offer a range of high quality blue and black silicone hoses for anyone who wants to construct their own induction system or modify their original one. The hoses are available in a wide range of diameters and 2 different lengths: 250mm and 1 metre straight sections. The hose will not be affected by the conditions in the engine bay. It should be noted that we recommend these hoses be used only for air filter applications.

250mm straight lengths

1 metre straight lengths

HOSE SPECIFICATION Material: Silicone with Polyester Reinforcement Colours: Blue or Black Operating Temperature: -60°C to +180°C Wall Thickness: 3Ply=4.5mm 4Ply=5.5mm

Inside Inside Ø Diameter (mm) Ø Diameter (Inch)

Plys

BLUE Part No.

BLACK Part No.

BLUE Part No.

BLACK Part No.

6.5 8 9.5 11 13 16 19 22 25 28 30 32 35 38 40 45 48 51 54 57 60 63 65 68 70 76 80 83 90 102

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4

SH-06 SH-08 SH-09 SH-11 SH-13 SH-16 SH-19 SH-22 SH-25 SH-28 SH-30 SH-32 SH-35 SH-38 SH-40 SH-45 SH-48 SH-51 SH-54 SH-57 SH-60 SH-63 SH-65 SH-68 SH-70 SH-76 SH-80 SH-83 SH-90 SH-102

SH-06-BK SH-08-BK SH-09-BK SH-11-BK SH-13-BK SH-16-BK SH-19-BK SH-22-BK SH-25-BK SH-28-BK SH-30-BK SH-32-BK SH-35-BK SH-38-BK SH-40-BK SH-45-BK SH-48-BK SH-51-BK SH-54-BK SH-57-BK SH-60-BK SH-63-BK SH-65-BK SH-68-BK SH-70-BK SH-76-BK SH-80-BK SH-83-BK SH-90-BK SH-102-BK

SH06-1M SH08-1M SH09-1M SH11-1M SH13-1M SH16-1M SH19-1M SH22-1M SH25-1M SH28-1M SH30-1M SH32-1M SH35-1M SH38-1M SH40-1M SH45-1M SH48-1M SH51-1M SH54-1M SH57-1M SH60-1M SH63-1M SH65-1M SH68-1M SH70-1M SH76-1M SH80-1M SH83-1M SH90-1M SH102-1M

SH06-1M-BK SH08-1M-BK SH09-1M-BK SH11-1M-BK SH13-1M-BK SH16-1M-BK SH19-1M-BK SH22-1M-BK SH25-1M-BK SH28-1M-BK SH30-1M-BK SH32-1M-BK SH35-1M-BK SH38-1M-BK SH40-1M-BK SH45-1M-BK SH48-1M-BK SH51-1M-BK SH54-1M-BK SH57-1M-BK SH60-1M-BK SH63-1M-BK SH65-1M-BK SH68-1M-BK SH70-1M-BK SH76-1M-BK SH80-1M-BK SH83-1M-BK SH90-1M-BK SH102-1M-BK

1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1” 1 1/8” 1 3/16” 1 1/4” 1 3/8” 1 1/2” 1 5/8” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” 2 3/8” 2 1/2” 2 9/16” 2 11/16” 2 3/4” 3” 3 1/8” 3 1/4” 3 1/2” 4”

Universal Small Diameter Silicone Hoses We offer a range of small diameter extruded silicone hoses which are designed for use in the engine bay. Ideal for vacuum line, breather hose, washer & coolant tubing or wire insulation. The operating temperatures of these hoses range from -60°C to +200°C Internal Ø Diameter 3mm 5mm 10mm

Part No SHS-00-BU SHS-01-BU SHS-02-BU

Wall Thickness 2mm 2.5mm 3mm

Length 200cm (2m) 200cm (2m) 200cm (2m)

Colour Blue Blue Blue

3mm 5mm 10mm

SHS-00-BK SHS-01-BK SHS-02-BK

2mm 2.5mm 3mm

200cm (2m) 200cm (2m) 200cm (2m)

Black Black Black

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Silicone Hoses

57

45° & 90° Silicone Hose Elbows (150x150mm) We offer a range of high quality blue and black silicone hoses for anyone who wants to construct their own induction system or modify their original one. The hoses are available in a wide range of diameters and 2 different shapes: 45º elbow and 90º elbow. The hose will not be affected by the conditions in the engine bay. It should be noted that we recommend these hoses be used only for air filter applications.

45° Elbows

90° Elbows

HOSE SPECIFICATION Material: Silicone with Polyester Reinforcement Colours: Blue or Black Operating Temperature: -60°C to +180°C Wall Thickness: 3Ply=4.5mm 4Ply=5.5mm

Inside Inside Ø Diameter (mm) Ø Diameter (Inch)

Plys

BLUE Part No.

BLACK Part No.

BLUE Part No.

BLACK Part No.

6.5 8 9.5 11 13 16 19 22 25 28 30 32 35 38 40 45 48 51 54 57 60 63 65 68 70 76 80 83 90 102

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4

A45-06 A45-08 A45-09 A45-11 A45-13 A45-16 A45-19 A45-22 A45-25 A45-28 A45-30 A45-32 A45-35 A45-38 A45-40 A45-45 A45-48 A45-51 A45-54 A45-57 A45-60 A45-63 A45-65 A45-68 A45-70 A45-76 A45-80 A45-83 A45-90 A45-102

A45-06-BK A45-08-BK A45-09-BK A45-11-BK A45-13-BK A45-16-BK A45-19-BK A45-22-BK A45-25-BK A45-28-BK A45-30-BK A45-32-BK A45-35-BK A45-38-BK A45-40-BK A45-45-BK A45-48-BK A45-51-BK A45-54-BK A45-57-BK A45-60-BK A45-63-BK A45-65-BK A45-68-BK A45-70-BK A45-76-BK A45-80-BK A45-83-BK A45-90-BK A45-102-BK

A90-06 A90-08 A90-09 A90-11 A90-13 A90-16 A90-19 A90-22 A90-25 A90-28 A90-30 A90-32 A90-35 A90-38 A90-40 A90-45 A90-48 A90-51 A90-54 A90-57 A90-60 A90-63 A90-65 A90-68 A90-70 A90-76 A90-80 A90-83 A90-90 A90-102

A90-06-BK A90-08-BK A90-09-BK A90-11-BK A90-13-BK A90-16-BK A90-19-BK A90-22-BK A90-25-BK A90-28-BK A90-30-BK A90-32-BK A90-35-BK A90-38-BK A90-40-BK A90-45-BK A90-48-BK A90-51-BK A90-54-BK A90-57-BK A90-60-BK A90-63-BK A90-65-BK A90-68-BK A90-70-BK A90-76-BK A90-80-BK A90-83-BK A90-90-BK A90-102-BK

1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1” 1 1/8” 1 3/16” 1 1/4” 1 3/8” 1 1/2” 1 5/8” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” 2 3/8” 2 1/2” 2 9/16” 2 11/16” 2 3/4” 3” 3 1/8” 3 1/4” 3 1/2” 4”

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


58

Clamps & Clips

MINI HOSE CLAMPS (Zinc Plated) The Mini Hose Clamp also known as the Fueline or Petrol Pipe Clip is made for many applications where wide adjustment span is not necessary. Supplied in packs of 10 pieces. CLIP SPECIFICATION Material: Zinc Plated Mild Steel Band Type: Rolled Edges Screw Type: Slotted Hex Head Standard: DIN 3016

Clamping Part No Range (mm) MHC-79 7-9 MHC-810 8-10 MHC-911 9-11 MHC-1113 11-3 MHC-1315 13-15 MHC-1618 16-18

Band Width (mm) 9 9 9 9 9 9

Band Thickness (mm) 0.06 0.06 0.06 0.06 0.06 0.06

Screw Diameter (mm) 7 7 7 7 7 7

Band Thickness (mm) 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5 1.5 1.5

Screw Diameter (mm) M5 M5 M5 M5 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8

T-BOLT HOSE CLAMPS (Zinc Plated) T-Bolt Hose Clamps have a small set screw which pulls the two halves of the clamp together, creating a heavy duty hose clamp. Ideal for turbo pressure hoses and high pressure engine cooling hoses. Supplied individually. CLIP SPECIFICATION Material: Zinc Plated Mild Steel Band Type: Rolled Edges Screw Type: Hex Head

Part No TBC-1719 TBC-2022 TBC-2325 TBC-2628 TBC-2931 TBC-3235 TBC-3639 TBC-4043 TBC-4447 TBC-4851 TBC-5255 TBC-5659 TBC-6063 TBC-6467 TBC-6873 TBC-7479 TBC-8085 TBC-8691 TBC-9297 TBC-98103

Clamping Range (mm) 17 - 19 20 - 22 23 - 25 26 - 28 29 - 31 32 - 35 36 - 39 40 - 43 44 - 47 48 - 51 52 - 55 56 - 59 60 - 63 64 - 67 68 - 73 74 - 79 80 - 85 86 - 91 92 - 97 98 - 103

Band Width (mm) 18 18 18 18 20 20 20 20 22 22 22 22 22 22 24 24 24 24 24 24

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Hose Joiners

59

Beaded Alloy Joiners Polished T6063 alloy hose joiners are available in a range of sizes and designed with raised 2mm high beaded ends to ensure a tight secure fit inside silicone and rubber hoses. The 1.6mm wall thickness means that these 100mm long joiners have a wide operating temperature band and offer a lightweight solution for hose joining applications. CLIP SPECIFICATION Material: Polished Alloy Grade: T6063 Wall Thickness: 1.6mm Length: 100mm Operating Temperature: up to 220°C

Outside Part No Ø Diameter(mm) BAJ-06 6.5 BAJ-08 8 BAJ-09 9.5 BAJ-11 11 BAJ-13 13 BAJ-16 16 BAJ-19 19 BAJ-22 22 BAJ-25 25 BAJ-28 28 BAJ-30 30 BAJ-32 32 BAJ-35 35 BAJ-38 38 BAJ-40 40 BAJ-45 45 BAJ-48 48 BAJ-51 51 BAJ-54 54 BAJ-57 57 BAJ-60 60 BAJ-63 63 BAJ-65 65 BAJ-68 68 BAJ-70 70 BAJ-76 76 BAJ-80 80 BAJ-83 83 BAJ-90 90 BAJ-102 102

Outside Ø Diameter(Inch) 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1” 1 1/8” 1 3/16” 1 1/4” 1 3/8” 1 1/2” 1 5/8” 1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” 2 3/8” 2 1/2” 2 9/16” 2 11/16” 2 3/4” 3” 3 1/8” 3 1/4” 3 1/2” 4”

Wall Thickness (mm) 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

Fixing Clips Fixing Clips available in a range of sizes. Ideal for securing hoses, tubing etc.

Part No

Diameter Ø

Size OO Size OX Size 1A Size 3 Size 4 Size 4X Size 6X Size 7 Size 7.5

Fits 12-20 mm Fits 18-25 mm Fits 22-30 mm Fits 55-70 mm Fits 70-90 mm Fits 85-100 mm Fits 130-150 mm Fits 135-165 mm Fits 158-190 mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


60

Cold Air Ducting

Cold Air Ducting Kit These kits are available in both 50mm and 70mm diameter and are supplied with black or silver ducting which extends to a 1 metre length. Ideal for directing cold air where it is needed most, to the air filter, to the engine air inlet or to the braking system. Can be used in a high temperature environment.

50mm Ø

Each kit contains: • 1m of ducting (extended) • 2 Silver alloy funnels • 2 Fixing Clips • 2 Cable Ties

70mm Ø

Part No

Description

DK-03-S DK-04-B

50mm Ø Silver Ducting Kit 50mm Ø Black Ducting Kit

DK-01-S DK-02-B

70mm Ø Silver Ducting Kit 70mm Ø Black Ducting Kit

A range of ducting in a variety of sizes as listed below. Suitable for different air relocation applications such as directing cold air to air filters, engine air inlet and braking systems.

Silver Flexi Alloy Tubing For high temperature applications.

Ø 70mm diameter

Ø 50mm diameter

Description

Diameter /Length Part No

Silver Flexi Alloy Tubing Silver Flexi Alloy Tubing

50mm Ø x 1m 70mm Ø x 1m

G50 G70

Black Flexi Alloy Tubing For high temperature applications.

Ø 100mm Ø 80mm

Ø 70mm

Ø 50mm

Description

Diameter /Length Part No

Black Flexi Alloy Tubing Black Flexi Alloy Tubing Black Flexi Alloy Tubing Black Flexi Alloy Tubing

50mm Ø x 1m 70mm Ø x 1m 80mm Ø x 1m 100mm Ø x 1m

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

APK50 APK70 APK80 APK100


Cold Air Ducting

61

Heavy Duty PVC Flexi Tubing For medium temperature applications.

Description

Diameter /Length Part No

Heavy Duty Flexi Tubing Heavy Duty Flexi Tubing Heavy Duty Flexi Tubing

70mm Ø x 1m 80mm Ø x 1m 102mm Ø x 1m

G70TW G80TW G102TW

Alloy Cold Air Funnels We have a range of different sized alloy funnels available in a range of colours. These funnels are designed to be mounted externally on the vehicle, either in the bumper, lower front valance or the side wings of the vehicle. The idea is to attach flexi ducting to the back of the funnel using a fixing clip and then direct cold air to where it is required, either to the air filter or air inlet or to the braking system. Simple to fit and supplied in pairs (2 pieces).

A

B

C

D

Ø of Top

Ø of Base (external) Part No

Colour (external)

A

70mm 70mm 70mm

46mm 46mm 46mm

ECAF-46S ECAF-46B ECAF-46R

Silver Blue Red

B

120mm 120mm

66mm 66mm

ECAF-66S ECAF-66R

Silver Red

C

120mm 120mm 120mm

76mm 76mm 76mm

ECAF-76S ECAF-76B ECAF-76R

Silver Blue Red

D

140mm 140mm

96mm 96mm

ECAF-96B ECAF-96R

Blue Red

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Lighting

Flexible LED - High Intensity White Light DRL

S These super bright white LED daytime DAYTIME RUNNING LIGHTS running lights (DRLS) are highly visible and can be fully integrated with any headlight so they look like an original part. The self-adhesive backing makes fitting easy so you do not need to open the headlight casing. The low profile subtle design will also allow them to be fitted into small recesses like grille openings.

ULTRA BRIGHT TRIPLE LED BLOCK FOR HIGH VISIBILITY

• Suitable for interior or exterior use • Weatherproof and Shockproof • Simple 2 wire installation - self-adhesive • Kit contains 2 x 49cm lengths with 10 triple LED blocks on each strip • Suitable for any 12V power source • Can be fitted to outside of any headlight no need to break open the casing to install • LED Strips are handed left and right

Kit Contains: • 2 x 49cm Flexible LED Strips 1 x Left Handed 1 x Right Handed • Fitting Instructions • 1 x Cleaning Sachet

Overall Length 49cm

Part No Description ETL49307 Flexible LED High Intensity White Light

62

Ultra Bright Triple LED Blocks for High Visibility

Trim Guide Line make it easy to cut to required length

LED Screw Lights 1 LED SCREW LIGHTS with forward light projection These chrome screw lights have an LED bulb on the top and the light is projected forward so it offers all-round illumination (white light only). Part No Description AIL415W Dome Design (2 pieces) AIL750W Bullit Design (2 pieces) AIL1975W Recessed Design (2 pieces)

All LED Screw Lights offer the following: • Suitable for 12 Volt power source • Supplied in pairs (2 pieces) • Simple 2 wire installation • Interior or exterior use • Numerous applications: engine bays, number plates, roof racks, cycle racks, trailer boards, various motorbike applications or just for decorative purposes 2 LED SCREW LIGHTS with right angle light projection The head of this screw light has been uniquely designed with a machined

1

DOME DESIGN

Part No: AIL415W

1

BULLIT DESIGN

Part No: AIL750W

1

RECESSED DESIGN Part No: AIL1975W

21mm 20mm 16mm 16mm

10mm

12mm

12mm

12mm

side aperture from where a bright LED light is emitted. This gives a right angled projection which can be directed where you want it. Available in 4 colours: white, blue, red and green. Part No AIL756W AIL756B AIL756R AIL756G

Description White (2 pieces) Blue (2 pieces) Red (2 pieces) Green (2 pieces)

2

RIGHT ANGLE LIGHT PROJECTION 13mm

17mm 21mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

14mm


Lighting

63

410mm Long Interior Fluorescent Light Surface mount 12V 8W Interior Flourescent Light. Mount it anywhere. Pre-wired and comes with an on-off switch. Ideal for cars, vans, caravans, boats, motorhomes etc. Dimensions: 410mm L x 65mm H

Part No LP70667

Description 12V - 8W 410mm L x 65mm H Fluorescent Interior Light

Additional Halogen Light Ideal for Vans, Motorhomes, Caravans & Boats 12V 10W universal fit Halogen Interior Light. The stylish surface mounted light design has a white casing and is supplied with fixings. Easy to install and has a simple 2 wire connection. Ideal for motorhomes, vans, cars, boats, caravans etc. Dimensions 240mm L x 85mm H x 55mm D Part No LP72013

Description 12V - 10W Halogen Interior Light

Flashing Red LED Light This simple, discreet flashing red LED is an ideal theft deterrent that can be positioned anywhere. It is realistic, instantly effective and will deter potential thieves. It is supplied with a battery and an extra self-adhesive pad. Ideal for cars, vans, caravans, boats, homes, garden sheds and many more applications. Part number AIL3503

NEW

Description Flashing Red LED Light

The battery supplied with the unit will work continuously in excess of 1000 hours.

Red LED Light 12V/24V Red LED light.

Part No LP45568

Description 12V/24V Red LED Light

Flush Mount SMD Light 12V/24V Flush Mount SMD light with a single bright long lasting SMD. Rated to IP67 water resistant housing. Part No LP41487 LP41488 LP41489

Description 12V/24V Flush Mount SMD Light - White 12V/24V Flush Mount SMD Light - Red 12V/24V Flush Mount SMD Light - Amber

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


64

Switches

Key Switch with Dust Cover 12V 10 amp key switch with a sprung loaded dust cover and two keys. Ideal for use as an exterior alarm or security (tamper proof) switch. Diameter of body 19mm x 16mm. Part No LP45550

Description 12V 10 amp Key Switch with dust cover

Heavy Duty Battery Isolator Switch 12V to 50V 200 amp heavy duty battery isolator switch with removable control cap for safety and security. Ideal for trailers, caravans, motorhomes. Made from tough impact resistant ABS. Part No LP39032

Description 12V to 50V 200 amp Heavy Duty Battery Isolator Switch

3 Position Battery Cut-Off Switch 12V to 32V 100A Max Battery Cut-Off Switch has a 3 position operation for on/off and key removal functions. Ideal for interrupting the main electrical circuit to help preserve batteries during vehicle storage or as a safety come anti-theft action with the removable selector Part No LP39081

Description 12V to 32V Battery Cut-Off Switch

Battery Kill Switch Cuts battery power dead and also acts as a great anti-theft device. Simple to fit and helps save the battery when the vehicle is not in use or off the road.

Part No LP39045

Description 12V Battery Kill Switch

Red Push Button Switch 28mm Ø diameter non illuminated on/off red push button switch. 12V 10 amp twin terminal fitment for numerous applications. Part No LP45555

Description 12V 10 amp 28mm diameter on/off Push Button Switch

Push-Pull Switch 12V/24V 50A Max Push-Pull Switch with red LED light. 12V 10 amp twin terminal fitment for numerous applications. Part No LP45569

Description 12V/24V Push-Pull Switch

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Switches

65

Illuminated Rocker Switch with Mounting Panel 12V 20 amp Red Illuminated on/off rocker switch mounted in a 42mm x 34mm panel that is ideal for mounting in or under a vehicle dash board.

Part No LP45552

Description 12V 20 amp Red Illuminated Rocker Switch with Mounting Panel

4 Position Rotating Switch LED illuminated 4 Position Rotating Switch suitable for 12V and 24V applications. Ideal for cars, motorhomes, caravans, trucks and vans. 20 Amp max Part No LP45566

Description 4 Position Rotating Switch

Plugs & Sockets

Cigarette Lighter Power Plug with External Fuse Holder and 1 metre cable 12V/24V 10 amp Cigarette lighter socket with external fuse holder and 1 metre extension cable. Illuminated on/off switch and will fit most standard European and DIN style sockets. Fused to protect both the appliance and vehicle. Can be attached to most 12V or 24V appliances.

Part No LP98090

Description 12V/24V Cigarette Lighter Plug with External Fuse Holder and 1m Cable

Cigarette Lighter Power Plug with 1.2 metre (120cm) long cable 12V/24V 10 amp Cigarette lighter socket with 1.2 metre (120cm) extension cable. This product incorporates an LED Illuminated power indicator light and features an easy to change fuse to protect both the appliance and vehicle. Can be attached to most 12V or 24V appliances.

Part No LP98091

Description 12V/24V Cigarette Lighter Plug with 1.2 metre (120cm) Cable

12V/24V Quick Connection Power Plug 12V/24V 10 amp fused power plug with positive and negative quick connections. Either use banana plugs or cable directly to the plug for a fast and secure connection. Fused to protect both the appliance and vehicle. Can be attached to most 12V or 24V appliances.

Part No LP39004

Description 12V/24V Quick Connection Power Plug

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


66

Plugs & Sockets

12V/24V Power Plug with Side Cable Connection 12V/24V 10 amp fused power plug with side sleeve connection. The side sleeve allows a direct cable connection to the plug. Fused to protect both the appliance and vehicle. The plug has green illuminated on/off switch. Can be attached to most 12V or 24V appliances. Part No LP39003

Description 12V/24V Power Plug with Side Cable Connection

Plug-In Mini USB Charger 12V/24V - 1000mA plug in mini USB charger suitable for charging GPS, iPhones, iPod, PSP, mobile phones and other devices. Simply plugs into the power/cigarette lighter socket and then allows you to insert your device’s USB cable into the mini charger. Part No LP39019

Description Plug-In Mini USB Charger

Retractable Cigarette Lighter Socket extension with 3 metre long lead 12V Cigarette lighter socket with 3 metre extension lead. Features a retractable storage reel for tidy storage of excess cable, Illuminated on/off switch and fused to 10 amp (max rating when fully unwound). Part No LP39038

Description 12V Retractable Cigarette Lighter Socket Extension with 10 amp 3 metre long lead

USB Port and Twin Cigarette Lighter Sockets on 30cm long extension leads 12V/24V fused plug with 1 x 5V 1000mA USB port and 2 x 4A cigarette lighter power sockets. The lighter sockets are both pre-wired on a 30cm long extension cord. The sockets have an integrated dust cover ideal for cars, motorhomes, caravans, trucks, and vans. Part No LP38966

Description USB Port and Twin Cigarette Lighter Sockets

Twin Sockets with 2.5 metre long extension lead 12V/24V cigarette lighter plug with 2 x 5 amp sockets each on a 2.5 metre (250cm) long extension lead. The sockets are pre wired and come complete with a self-adhesive pad so they can be mounted where they are needed. Ideal for connecting 2 devices simultaneously to the same cigarette lighter power socket. Part No LP39054

Description 12V/24V Twin Sockets on a 2.5 metre (250cm) Extension Lead - 5 amp each socket

Cigarette Lighter Socket with Battery Terminal Clamps 12V Cigarette lighter socket with battery terminal clamps. The socket has a removable protective cap to protect from dust, dirt and moisture and can be simply clamped onto the battery terminals for instant power. Ideal in an emergency. Part No LP39057

Description 12V Cigarette Lighter Socket with Battery Terminal Clamps

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Sockets & Lighter Elements

67

22mm Ø Cigarette Lighter Element 12V 22mm Ø diameter cigarette lighter element fits most cars. Ideal replacement if the original one is missing. Part No LP39072

21mm Ø Cigarette Lighter Element 12V 21mm Ø diameter cigarette lighter element fits most cars. Ideal replacement if the original one is missing or broken.

22mm

Description 12V Cigarette Lighter Element - 22mm Diameter

Part No LP39063

Description 12V Cigarette Lighter Element - 21mm Diameter

Replacement Cigarette Lighter Power Sockets: 22-25mm Ø diameter opening 22-25mm Ø diameter opening cigarette lighter sockets. Available in three styles and suitable for car fans, lights, vacuum cleaners etc 22-25mm

LP39066

LP39064

Ø internal diameter

LP39060 Part No LP39060

Description Non illuminated 12V/24V cigarette lighter socket only

Part No LP39064

Description Amber illumination 12V only cigarette lighter socket only

Part No LP39066

Description Amber illumination 12V only complete unit with cigarette lighter

Cigarette Lighter Socket: 28-29mm Ø diameter opening 28-29mm Ø diameter opening cigarette lighter sockets.

28-29mm

Both 12V only

LP39071

LP39070

Ø internal diameter Part No LP39071

Description Green illumination cigarette lighter socket only

Part No LP39070

Description Green illumination complete unit with cigarette lighter

Round Flush Mount Socket 12V/24V 10 amp single IP65 water resistant socket with spade terminal connectors. The socket has a dust cover and is ideal for cars, motorbikes, motorhomes, caravans, lorries and vans. Suitable for interior or exterior use and has a built in fixing system. Part No LP39061

Description Round Flush Mount Socket

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


68

Sockets & Mounting Pods

Single Power Socket with Mounting Panel 12V/24V Universal flush fit water resistant socket fitted into an injection moulded mounting panel (65.6mm wide x 55mm high). The socket has a dust cover and comes complete with a 60cm Red & 30cm Black length of cable and fixings. Ideal for cars, motorbikes, motorhomes, caravans, lorries and vans. (12V = 10 amp max, 24V = 6 amp max) Part No LP39035

Description 12V/24V Single Power Socket with Mounting Panel

Single Flush Mount Power Socket with In Line Fuse 12V/24V 15 amp single water resistant socket with an in line fuse holder. The socket has a dust cover and is ideal for cars, motorbikes, motorhomes, caravans, lorries and vans. Oval shape. Part No LP39034

Description 12V/24V, 15 amp Single Flush Mount Power Socket With In Line Fuse Holder - oval shape

Power Socket For External Use with 3.6 metre cable 12V/24V Single water resistant power socket with a foam lined sprung loaded cap for a water resistant seal. 15 amp max socket with 3.6 metres of cable. Can be mounted into a panel or bumper then secured with the rear fixing nut. Part No LP38969

Description Power Socket with 3.6 metre cable

Surface Mounted Waterproof Single Socket 12V/24V Surface Mounted Waterproof Single Socket suitable for interior or exterior fitment. Housing made from a tough black ABS plastic with dust/waterproof cover. Ideal for trailers, caravans and outdoor applications. Part No LP39031

Description 12V/24V Surface Mounted Waterproof Single Socket

Single Flush Mount Power Socket 12V/24V 20 amp flush fit water resistant socket. Supplied with a dust cover and is ideal for cars, motorbikes, motorhomes, caravans, lorries and vans. 60mm wide x 43mm high mounting panel. Part No LP39036

Description 12V/24V, 20 amp Single Flush Mount Power Socket

Twin Flush Mount Power Socket 12V/24V 20 amp flush fit water resistant socket. Supplied with dust covers and are ideal for cars, motorbikes, motorhomes, caravans, lorries and vans. 105mm wide x 45mm high mounting panel. Part No LP39037

Description 12V/24V, 20 amp Twin Flush Mount Power Socket

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Sockets & Mounting Pods

69

Twin Water Resistant Auxiliary Power Sockets 12V/24V 15 amp twin water resistant sockets with strong injection moulded housing. Ideal for internal or external use. The strong injection moulded mounting bracket allows for a variety of mounting positions and is supplied with all necessary fixings. The sockets have a dust/water resistant cover and come complete with fixings and approx 15cm long length of cable. Ideal for cars, motorbikes, motorhomes, caravans, trucks, trailers and vans. Part No LP39029

Description 12V/24V 15 amp Twin Water Resistant Auxiliary Power Sockets

Single Water Resistant Auxiliary Power Socket Surface mount 12V water resistant socket manufactured from tough black injection moulded ABS. Ideal for phone chargers, lamps, vaccuum cleaners, computers, cool boxes etc. The cover clips over the socket opening to provide a water resistant seal making the socket ideal for interior or exterior use. Suitable for motorbikes, trailers, campers/caravans, boats etc. Supplied with fitting screws and quick-connector clips for easy installation. Part No LP39067

Description 12V Water Resistant Auxiliary Power Socket

12V/24V Single USB Flush Mount Power Socket 12V/24V 2.1 amp flush fit water resistant single USB socket. Suitable for interior or exterior use. The flush mount socket features a dust proof cover and is suitable for charging GPS, iPhone, iPod, PSP, mobile phones and other digital devices. Part No LP39006

Description 12V/24V Single USB Flush Mount Power Socket

12V/24V Twin USB Flush Mount Power Socket 12V/24V 2.1 amp flush fit water resistant twin USB socket. Suitable for interior or exterior use. The flush mount socket features a dust proof cover and is suitable for charging GPS, iPhone, iPod, PSP, mobile phones and other digital devices. Part No LP39005

Description 12V/24V Twin USB Flush Mount Power Socket

Surface Mount Twin USB and Single Power Socket 12V/24V 15 amp power socket and twin 3000mA USB sockets. Mounted in a strong injection moulded bracket and supplied pre wired with approx 15cm long length of cable. Ideal for cars, motorhomes, caravans, trucks, and vans. Part No LP38967

Description Surface Mount Twin USB and Single Power Socket

Surface Mount Pods Black Plastic surface mount pods available in single or twin power sockets. Suitable for sockets part numbered LP39036, LP39005, LP39006 Part No LP39008 LP39009

Description Surface Mount Pod - Individual Power Socket Surface Mount Pod - Twin Power Socket

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


70

Mirrors

Large Flat Rear View Mirror Clips over original rear view mirror and will fit mirrors from 58mm to 77mm high. Quick and easy installation. Size: 300mm L x 65mm W. Part No LP65513

Description Large Flat Rear View Mirror 300mm L x 65mm W

Large Convex Rear View Mirror Clips over original rear view mirror and will fit mirrors from 58mm to 77mm high. Quick and easy Installation. Offers wide angle panoramic view. Size: 300mm L x 65mm W Part No LP65511

Description Large Convex Rear View Mirror 300mm L x 65mm W

Large Replacement Rear View Mirror If you need to replace your original rear view mirror then this will do the job. Supplied with a rotating swivel joint and strong adhesive to fix to windscreen. Size: 250mm L x 60mm W Part No LP65498

Description Large Replacement Rear View Mirror 250mm L x 60mm W

Small Replacement Rear View Mirror Small compact rear view mirror ideal for small compact cars. Fixes to windscreen with suction cup with a rotating swivel joint. Size: Size: 200mm L x 65mm W Part No LP65499

Description Small Replacement Rear View Mirror 200mm L x 65mm W

Small Auxiliary Interior Mirror Small Auxiliary Interior Mirror with suction cup and self-adhesive fitment so it can be dashboard or windscreen mounted. Adjustable ball joint, flat glass mirror offers good all round viewing angle. Size 120mm L x 60mm W Part No LP65552

Description Small Auxiliary Interior Mirror - 120mm L x 60mm W

2 in 1 Auxiliary Vanity Mirror Auxiliary Vanity Mirror with suction cup fitment so it can be mounted to the windscreen. The mirror itself has a magnetic base so can be removed easily. Size 120mm L x 65mm W Part No LP65554

Description 2 in 1 Auxiliary Vanity Mirror - 120mm L x 65mm W

Panoramic Interior Mirror Convex Panoramic Interior Mirror with suction cup mount and swivel ball joint. Can be stuck on front windscreen to give panoramic vision of rear seat and rear of vehicle. Size: 135mm L x 68mm W Part No LP65555

Description Convex Panoramic Interior Mirror - 135mm L x 68mm W

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Mirrors

71

Small Convex Hanging Mirror Convex Hanging Mirror. Clips onto existing rear view mirror and offers additional vision into rear of vehicle. Ideal for checking what is going on in the back seat. Size: 80mm L x 60mm W Part No LP65556

Description Small Convex Hanging Mirror 80mm L x 60mm W

Angled Blind Spot Mirror Self-adhesive Angled Blind Spot Mirror with tilting viewing angle option. Can be fitted into wing mirror, increasing visibility. Size: 53mm L x 35mm W. 1 piece per pack. • Easy to fit • Wide angle design for increased visibility • Helps eliminate blind spots for improved road awareness and visibility Part No LP65560

Description Angled Blind Spot Mirror 53mm L x 35mm W

Twin Blind Spot Mirror Can be fitted to any wing mirror helping increase visibility and safety. •Easy to fit, self-adhesive •Wide angle design helps eliminate blind spots and increases road awareness Part No EBSM001

Description Twin Blind Spot Mirror - 2 pieces

Adjustable Round Convex Blind Spot Mirror 50mm diameter convex self-adhesive Round Blind Spot Mirror with adjustable viewing angle. Can be fitted into wing mirror, increasing visibility. 1 piece per pack. • Easy to fit • Wide angle design for increased visibility • Helps eliminate blind spots for improved road awareness and visibility Part No LP65561

Description Adjustable Round Convex Blind Spot Mirror – 50mm diameter

Round Blind Spot Mirror 50mm diameter convex self-adhesive Round Blind Spot Mirror. Can be fitted into wing mirror, increasing visibility. 1 piece per pack. • Easy to fit • Wide angle design for increased visibility • Helps eliminate blind spots for improved road awareness and visibility Part No LP65562

Description Round Blind Spot Mirror – 50mm diameter

Self-adhesive Wide Angle Window Lens Self-adhesive Wide Angle Window Lens. Aids with reversing larger vehicles and helps eliminate blind spots. Simple to install. Size: 205mm x 250mm Part No LP65515

Description Self-Adhesive Wide Angle Window Lens 205mm x 250mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Clocks & Gauge Pods

12V Illuminated Digital Quartz Clock • Easy to install and simple to adjust, this digital clock is ideal for any 12V vehicle where a time piece is required. • Precision manufactured and water and shock proof with a 52mm diameter ABS body.

52mm

It incorporates the following features: 57mm

72

H

M

57mm

19mm

41mm

Gauge body is 52mm in diameter Ø, other dimensions can be seen on the drawing above.

Part No EDC-001

• Clear LCD Display • Black Bezel • Choice of 3 colours: white, green or red backlight illumination • 24 hour time display • Supplied with all fixings • Quick and easy to adjust time

Description 12V Illuminated Digital Quartz Clock

Illuminated Analogue Clock

Stainless Steel Bezel

• Classic clock design suitable for any vehicle and available with a black ABS or polished stainless steel bezel. • Precision manufactured with a sealed 52mm dia body and guaranteed to be waterproof. It incorporates the following features: • Suitable for both 12V or 24V vehicles • Precision manufactured water and shock proof design • Available with a black ABS or polished stainless steel bezel • Illuminated when ignition is on • Clear 12 hour time display • Quick and easy to adjust using the waterproof button switch • Supplied with all fixings. Part No EAC-002 EAC-003

Black Bezel

Description Black Bezel Analogue Clock Polished Stainless Steel Bezel Analogue Clock

3 Hole Stereo/Radio DIN Size Gauge Pod 3 - hole black gauge panel designed to fit in DIN size radio/stereo slot. Will take 52mm diameter gauges. Size: 190mm W x 60mm W Part No LP10059

Description 3 - Hole Gauge Panel For DIN Size Radio/Stereo Slot 190mm L x 60mm W

Rotating Gauge Pods These dash top-mounting pods are suitable for 52mm (2”) diameter gauges. Each pod has an adjustable foot that will allow the gauge to be rotated 360˚ so a precise viewing angle of the gauge can be achieved. Can be painted. Part No 39000 40000

Description Rotating Gauge Pod (Single) Rotating Gauge Pod (Triple)

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


General Accessories

73

Temperature Sender Unit

Oil Pressure Sender Unit

4 Input Sender Adaptor

Part No LP1017.9

Part No LP1017.0

Part No Description LP1010.7 Oil Temperature and Pressure Sender Adaptor - 1/8” NPT thread

Description Water and Oil Temperature Sender - 1/8” NPT thread

Description Oil Pressure Sender - 1/8” NPT thread

Aero Fin Antenna Suitable for 12 Volt applications. Can be used as a replacement for standard antenna. Supplied with a 15cm length of cable. 12 DB FM Gain, 15DB AM Gain, can be painted. Part No LP40265 LP40266

Description Black Aero Fin Antenna 1 12V 85mm L x 60mm W x 50mm H Black Aero Fin Antenna 2 12V 155mm L x 75mm W x 50mm H

Smart LED Fuses Smart LED fuses have an integrated LED that illuminates when the fuse blows. A direct replacement for traditional blade & mini blade fuses that makes it really simple to identify the blown fuse. Designed for 12V and 24V systems and supplied as a 10 piece mixed pack. Each Pack contains: 5A 1pc 20A 2pc 7.5A 1pc 25A 2pc 10A 1pc 30A 1pc 15A 2pc Part No LP70188 LP70196

Description Smart LED Traditional Blade Fuses (19.1mm wide) 10 Piece mixed pack Smart LED Mini Blade Fuses (11.2mm wide) 10 Piece mixed pack

Electrical Immersion Pump 12V Electrical Immersion Pump that simply clips on to the battery terminals then turn on to pump up to 30 litres per minute of non-flammable liquids like diesel, water, oil etc. The aluminium body has a removeable/washable external filter and a 19mm Ø pipe outlet to connect a suitable hose. 3m length of cable with on and off switch and battery clips. Part No LP72158

Description 12V Electrical Immersion Pump

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


74

General Accessories

Self-Adhesive Cable Clips These round self-adhesive cable clips are ideal for keeping thin cables in position whether it be in the home, office, car, van, lorry, caravan, boat etc. Great for use with many devices with a cable thickness up to approx 6mm in diameter like phone chargers, USB cables, GPS power cables that often get in the way. Sold in a pack of 5 or bulk buy of 100 pieces (not in retail packaging).

Part No CC001 CC002

Description Self-Adhesive Cable Clips - 5 Pieces Self-Adhesive Cable Clips - 100 Pieces

Self-Adhesive Cable Clamp These self-adhesive cable clamps are ideal for keeping thin cables in position whether it be in the home, office, car, van, lorry, caravan, boat etc. Great for use with many devices with a cable thickness up to approx 6mm in diameter like phone chargers, USB cables, GPS power cables that often get in the way. Supplied as a pack of 6 clips.

Part No LP70034

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Description Self-Adhesive Cable Clamps - 6 Pieces


General Accessories

75

Heavy Duty Steering Wheel Knob

Leather Steering Wheel Knob

Provides easy 360 degree steering control. Clamps on to the steering wheel with all fixings provided. Ideal for vans, motorhomes, lorries, tractors, forklift trucks etc

Part No LP00135

Description Black Heavy Duty Steering Wheel Knob

Provides easy 360 degree steering control. Clamps on to the steering wheel with all fixings provided. Ergonomically designed ball with stitched leather cover. Suitable for most cars. • Supplied with 1 sheet of rubber which can be added to reduce the diameter of the rim of the steering wheel. • Fits steering wheels with a diameter of 25mm or less. Part No LP00137

Description Black Leather Steering Wheel Knob

Textured Plastic Steering Wheel Knob Provides easy 360 degree steering control. Clamps on to the steering wheel with all fixings provided. Textured plastic design provides increased grip. Suitable for most cars. • Supplied with 2 sheets of rubber which can be added to reduce the diameter of the rim of the steering wheel. • Fits steering wheels with a rim diameter of 30mm or less. Part No LP00136

Description Black Textured Plastic Steering Wheel Knob

Sports Steering Wheel Cover

Cotton Steering Wheel Cover

Fits steering wheels with O.D of between 370mm-390mm and is easy to install with no stitching required.

Fits steering wheels with an O.D of between 370mm-390mm and is easy to install with no stitching required.

Black perforated leatherette top and bottom with smooth ergonomic hand grips to the side with red detail stitching.

Black Cotton outer lining for good grip in all conditions.

Supersedes Part No LP33043.

Part No LP33122

Description Black Smooth and perforated leatherette with red stitching

Part No LP33127

Description Black Cotton Steering Wheel Cover

Soft Grip Steering Wheel Cover

Silicone Steering Wheel Cover

Fits steering wheels with an O.D of between 370mm-390mm and is easy to install with no stitching required.

Fits steering wheels with an O.D of between 350mm-510mm and is easy to install with no stitching required.

Soft smooth black perforated leatherette with ergonomic handgrips. Supersedes LP33044.

Ideal protection when driving with dirty hands. Made from black anti-slip silicone for a superior grip even without gloves. Also covers up heavily worn areas. Washable and reuseable.

Part No LP33113

Part No LP32986

Description Black Soft Grip Perforated Steering Wheel Cover

Description Silicone Steering Wheel Cover

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


76

General Accessories

Sparco Mud Flaps Universal rally mudflaps (1 pair - 2 pieces). DIY fit - cut to required shape. Size: 470mm x 280mm Part number Colour 03791 White 03791AZ Blue 03791RS Red 03791NR Black

Mud Flaps Universal fit mud flaps for DIY application. Supplied in pairs (2 pieces) with self-tapping screws and washers included. Available in 2 colours: Black or Red 1 size: 425mm x 230mm Packed in colour card Part No LP1299.1 LP1299.2

Description Black Mud Flaps Red Mud Flaps

Universal Semi Shaped Mud Flaps Manufactured from a hard wearing durable flexible material, these semi-shaped universal mud flaps are supplied in pairs with fixing screws. They are designed for both front and rear wheel arches and can be trimmed so a professional fit can be achieved.

Part No LP12501 LP12502

Description Universal Semi Shaped Mud Flaps Size: 23.5cm x 31.5cm Universal Semi Shaped Mud Flaps Size: 26cm x 37cm

Heavy Duty Universal Mud Flaps These symmetrical shaped mud flaps are designed to be attached to any flat surface and can be trimmed to suit numerous applications. Manufactured for durability from a flexible tough heavy duty material. They are available in 3 sizes and are ideal for 4x4s pick-ups, vans, lorries and trailers. Supplied with fixings. Part No MFLAP1 MFLAP2 MFLAP3

Description Universal Mud Flaps Size: 35cm x 30cm Universal Mud Flaps Size: 40cm x 30cm Universal Mud Flaps Size: 45cm x 35cm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


General Accessories

77

Monster Horn - so loud it could wake the dead

MONSTER HORN

®

The twin tone air horn produces a short, powerful, ear splitting sound that will definitely get you noticed! • Full fitting kit and mounting instructions included • Simple DIY fit if you have a basic understanding of auto electricals • Can be fitted to work instead of your existing horn or independently of it using a momentary switch supplied Contents: • Small compact Compressor x1 • Pair of trumpets (1 high and 1 low tone) • Independent momentary switch and relay • Detailed fitting instructions • Complete mounting kit

Specification: Tone: Low = 580HZ_5%, High = 800HZ_5% • 12V • 115db Part No JGR-602

Description Twin Tone Monster Air Horn

Dual Tone Motorsport Horn This horn is an ideal upgrade for any 12V original equipment fitted horn. It simply replaces the standard horn on your car and provides a powerful upgrade. • Manufactured from tough black shock resistant ABS • Dual tone horn produces a loud sharp pitch • E1 Type Approved • Lightweight each unit weighs 195 grams • Waterproof housing & coated external connectors guarantee long term performance • Simple to install Specification: Tone: Low = 400HZ, High = 500HZ • 12V • 110db Part No A2209

Description Dual Tone Motorsport Horn

Aluminium Grille Mesh The high quality anodised aluminium grille mesh can be used on front grilles, bonnet vents, air intakes or air scoops in front spoilers to add style and prevent debris from being sucked into the engine bay. Easy to cut and shape to your requirements; the size, designs and colours which are available are clearly listed below.

Size 100(L)cm x 33(W)cm MEDIUM MESH

Part No LP04580 LP04584

Description Silver aluminium Black aluminium

Size 120(L)cm x 20(W)cm MEDIUM MESH

Part No LP04590 LP04594

Description Silver aluminium Black aluminium

Size 120(L)cm x 20(W)cm FINE MESH

Part No LP04592 LP04597

Description Silver aluminium Black aluminium

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


78

General Accessories

Pressed Steel Rectangle Anchor Point These zinc plated steel anchor points are ideal for vans, trailers, lorries and many other vehicles for providing a secure fixing point. • 180Kg lashing capacity each anchor point • Supplied as a pair - 2pcs • 540Kg breaking strength each anchor point • Supplied with fixings

Part No LP97701

D Ring Cargo Anchor Point

Description Rectangle Anchor Point - 180kg capacity - 2 Pcs

800kg lashing capacity These zinc plated steel forged D ring anchor points are ideal for vans, trailers, lorries and many other vehicles for providing a secure fixing point. • D Ring manufactured from forged steel • 800Kg lashing capacity each anchor point • Supplied as a pair - 2pcs • 2400Kg breaking strength each anchor point

Part No LP97702

D Ring Cargo Anchor Point

Description D Ring Anchor Point - 800kg capacity - 2 Pcs

180kg lashing capacity These zinc plated steel forged D ring anchor points are ideal for vans, trailers, lorries and many other vehicles for providing a secure fixing point. • D Ring manufactured from forged steel • 180Kg lashing capacity each anchor point • Supplied as a pair - 2pcs • 540Kg breaking strength each anchor point

Part No LP97703

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com

Description D Ring Anchor Point - 180kg capacity - 2 Pcs


General Accessories

79

Pressed Steel Circular Anchor Point These zinc plated steel anchor points are ideal for vans, trailers, lorries and many other vehicles for providing a secure fixing point. • 200Kg lashing capacity each anchor point • Supplied as a pair - 2pcs • 600Kg breaking strength each anchor point • Supplied with fixings

Part No LP97700

Description Pressed Steel Anchor Point - 200kg capacity - 2 Pcs

Elasticated Securing Strap Black Elasticated Securing Strap approx. 200mm long (un-stretched). Ideal for use on roof racks, bike racks, trailers, luggage bags and securing luggage etc. • Each strap stretches to approx. double its length. • Locking ball has a diameter of 25mm approx. Strap diameter is 6mm. • 20 pieces per pack Part No LP60180

Description Black Elasticated Securing Strap (Pack of 20)

2 Piece Bungee Cord & Locking Hook 8mm Ø Stretchable Bungee Cords with securing clip. The high quality stretchable cords can be adjustable between 20cm-150cm in length and are fitted with a safety locking hook at either end. Has numerous applications for sporting equipment, camping, etc. Part No LP60178

Description 2 Piece Bungee Cord & Locking Hook

Elasticated Net Pocket Universal fit Elasticated Net Pocket 17cm x 8cm ideal for use in cars, vans, boats, caravans, motorhomes etc to store items like mobile phones safely and securely. The pocket has a self adhesive 3m tape on the rear or can be mounted using the self-tapping screws provided. Part No LP60266

Description Universal Fit Elasticated Net Pocket 170mm x 80mm

Multi-Purpose Waterproof Bag Handy bag to keep phones and documents waterproof. Size: 160mm x 140mm with secure waterproof opening and closing system.

Part No LP65364

Description Multi-Purpose Waterproof Bag 160mm x 140mm

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


80

General Accessories

Collapsible Plastic Liquid Container Ideal for camping, outdoor trips, car shows etc. Can be collapsed down and stored easily when not in use. A handle allows the tank to be carried easily and both come with an open/close tap. Available in 5 litre and 10 litre sizes (the 10 litre tanks also come with a flexible spout).

LP66970 - (5L)

Part No LP66970 LP66973

Description 5 Litre Collapsible Plastic Container 10 Litre Collapsible Plastic Container with flexi spout

LP66973 - (10L)

Flexible Funnel with Filter Mesh Screen Flexible neck unscrews at the base of the funnel which is fitted with a mesh gauze. Overall length is 390mm and the flexible tube length is 280mm. Funnel is 110mm high and the diameter at the top of the funnel is160mm.

m

280m

Part No LP67030

Description Flexible Funnel with Filter Mesh Screen

Battery Post & Terminal Cleaner LP70029

Handy tool to clean battery posts and terminals of grease, dirt and grime for a good electrical connection.

LP70021 Part No LP70029* LP70021

Set of 4 Funnels

Description 4 in 1 Battery Cleaner – 15mm & 22mm diameter 3 in 1 Battery Cleaner – 22mm diameter

* While stocks last.

Injection Moulded, 1 piece design funnels, in 4 sizes as below: • 75mm long x 53mm Ø diameter • 100mm long x 75mm Ø diameter • 130mm long x 100mm Ø diameter • 140mm long x 120mm Ø diameter Part No LP67031

Description Set of 4 funnels

Siphon Pumps The Siphon Pump safely transfers liquids up to 7 litres per minute. Simple and safe to use, suitable for: petrol, diesel, oils, water and many other liquids. It eliminates the risk of ingesting any hazardous or nasty fluids. A simple jiggling action starts the siphon flow. Available in 13mm or 18mm Ø tube diameters. Tube lengths listed below. Part No LP98064 LP98070

Description Siphon Pump - 18mm Ø tube diameter x 250cm Long Siphon Pump - 14mm Ø tube diameter x 210cm Long

Professional Siphon with the easy to use pump. 180cm long clear tube. LP38123

Part No LP38123

Description Professional Siphon Pump - 18cm Long

Steel Jerry Can Pouring Spout The Steel Jerry can pouring spout is ideal for pouring water, petrol or diesel from a Jerry can. The 280mm long flexible spout comes complete with a metal clamp and integral gauze filter. UN Approved. Part No LP67020

Description Steel Jerry can pouring spout

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


General Accessories

81

Sunvisors GREEN

BLUE

A faded graduation design which starts off light and gradually gets darker. When installed the sunvisors do not remove visibility and are transparent from the inside of the vehicle. Size: 20cm deep x 150cm long and supplied with squeegee and cutter.

SMOKE

Part No LP75300 LP75301 LP75302 LP75304 LP75305

Description Colour green fades from light green to dark green Colour blue fades from light blue to dark purple Colour smoke fades from light smoke to dark smoke Blue chromed effect fades from light blue to dark blue Smoke chromed effect fades from light smoke to dark smoke

Windscreen Cover Designed to protect against frost and snow and any other severe elements the weather can throw at your vehicle. Made from a silver flexible and durable PVA material. Quick and easy to install. Simply unzip it from its storage pouch, open the front doors of your vehicle, lay it across the screen and fold the flaps on the end inside the vehicle. Stick the suction cups on to the inside of the screen and close the doors. Part No LP66851

Description Windscreen cover - 1850mm L x 700mm W

Size open: 1850mm x 700mm Folded size in pouch: 260mm x 250mm

Silver Reflective Sun Shade Folding Silver Reflective Sun Shade with two suction cups on each end. Ideal for front and rear screens and available in three sizes. Helps keep your vehicle’s interior cool. Part No LP66845 LP66846 LP66847

Description Small Silver Reflective Sun Shade - 1100mm L x 600mm W Medium Silver Reflective Sun Shade - 1300mm L x 700mm W Large Silver Reflective Sun Shade - 1400mm L x 800mm W

Front Side Window Shade Black nylon Front Side Window Shade with suction cups. 450mm L x 350mm W foldable design can be stored easily in the car when not required. Designed to meet EEC 91/338EEC – BS EN1122:2001 standards. 2 pieces per pack Part No LP66917

Description Front Side Window Shade 450mm L x 350mm W - 2pcs

Rear ¾ Side Window Shade Black nylon Rear 3/4 Side Window Shade with suction cups. 650mm L x 450mm W foldable design can be stored easily in the car when not required. Designed to meet EEC 91/338EEC – BS EN1122:2001 standards. 2 pieces per pack Part No LP66916

Description Black Rear 3/4 Side Window Shade 650mm L x 450mm W - 2pcs

Rear Window Shade Black nylon Rear Window Shade with suction cups. 1000mm L x 500mm W foldable design can be stored easily in the car when not required. Designed to meet EEC 91/338EEC – BS EN1122:2001 standards. 1 piece per pack Part No LP66918

Description Black Rear Window Shade 1000mm L x 500mm W - 1pcs

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


82

General Accessories

Tax Disc/Permit/Badge Holder R VE SIL

UE

BL

The E-TECH alloy holder has been designed to be both functional and stylish. The creative hexagonal design is unusual and produced using precision CNC milling equipment to ensure that all components fit together perfectly. Simple to fit to the windscreen using ultra strong self-adhesive pads to guarantee a secure fit. We have also made sure that installing and removing the tax disc/permit/badge is a quick and simple job without using any fiddly fixing tools. Part No ETX-01-S ETX-02-B ETX-03-R

D RE

Colour Silver Tax Disc/Permit/Badge Holder Blue Tax Disc/Permit/Badge Holder Red Tax Disc/Permit/Badge Holder

BACK VIEW Pressed stainless steel back plate with embossed E-TECH logo

Holder Fitting Kit

Suitable for Alloy and Plastic Holders Kit consists of six clear double sided self-adhesive pads for securing the holder to the windscreen. Minimum order of 5 packs. Part No TDFIX-1

Description 6 double sided clear self-adhesive pads

Windscreen Ticket Holder Ideal for holding parking permits and other pieces of paper that need to be displayed on the vehicle windscreen. • Manufactured from a clear, strong ABS plastic which is held in place with a self-adhesive pad. • The holder sticks to the inside of the windscreen, simple to install and highly effective. Part No LP65347

Description Windscreen Ticket Holder

Seat Belt Alarm Stopper The Seat Belt Alarm Stopper is ideal for anyone who wants to stop the seat belt alarm from sounding when not being used. Universal fitment for most vehicles. Ideal for mechanics and garages when cars are only being moved short distances on private land.

Part No LP72399

Description Seat Belt Alarm Stopper

Seat Belt Buckle Extension Socket and Alarm Stopper This device offers an extension to the seat belt socket. Will fit into most vehicles’ seat belt sockets and is ideal for mechanics and garages when cars are being moved short distances on private land.

Part No LP72397

Description Seat Belt Buckle Extension Socket and Alarm Stopper

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Wheel Accessories

83

To view our complete range of wheel accessories including Wheel Locks, Nuts, Bolts, Studs, Spacers and many other wheel related products, please request a copy of our ’Precision Engineered Wheel Accessories catalogue’ - the UK’s largest range of wheel accessories!

Push-On Nut & Bolt Head Covers We have available push-on nut/bolt head covers in black, chrome or technik grey finish to fit 17mm, 19mm and 21mm nut or bolt heads.

• A quick, easy and inexpensive way to instantly transform your wheels • Provides an ideal finishing touch to any wheel. • Supplied in sets of 20 pieces with a removal ‘puller’ tool in an attractive blister pack.

Faded, flaking nut covers spoil the look of your wheels.

CAP PULLER

17mm HEX

19mm HEX

BLACK FINISH

TECHNIK GREY FINISH

CHROME FINISH

21mm HEX

Part No.

Description

NC001-CH

17mm Hex Chrome nut/bolt cover - 20 pcs & Puller

NC002-BK

17mm Hex Black nut/bolt cover - 20 pcs & Puller

NC005-TG

17mm Hex Technik Grey nut/bolt cover - 20 pcs & Puller

Part No.

Description

NC003-CH

19mm Hex Chrome nut/bolt cover - 20 pcs & Puller

NC004-BK

19mm Hex Black nut/bolt cover - 20 pcs & Puller

NC006-TG

19mm Hex Technik Grey nut/bolt cover - 20 pcs & Puller

Part No.

Description

NC007-CH

21mm Hex Chrome nut/bolt cover - 20 pcs & Puller

NC008-BK

21mm Hex Black nut/bolt cover - 20 pcs & Puller

NC009-TG

21mm Hex Technik Grey nut/bolt cover - 20 pcs & Puller

Chromed ABS Valve Caps 4 Piece set of Chromed ABS Valve caps in 4 unique designs. Will fit cars, bikes (with Schrader Valve), quads & motorbikes. WILL FIT:

Part No. VC1268 VC1269 VC1279 VC1297

Description Chrome Hammer Design - 4Pcs Chrome Screw Head Design - 4Pcs Chrome Star Design - 4Pcs Chrome 8 Ball Design - 4Pcs

(Always lubricate valve stem threads to prevent the caps from seizing on)

Tethered Valve Caps These universal alloy valve caps have a strap which keeps the cap attached to the valve and prevents loss during tyre pressure testing or tyre deflating. They have an internal O ring to ensure an air tight seal. Ideal for Cars, Vans, Bicycles, Motorbikes, Caravans and many more vehicle applications. Part No. LP02507

Description Pack of 4 Alloy Valve Caps with Tethers

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


84

Wheel Accessories

Premium 1 Ton (1000Kg) Scissor Jack 1 Ton (1000Kg) Scissor Jack with ratchet handle mechanism for easy use. Large base for stable jacking and manufactured according to CE 2006/42/EC European safety standards. Adjustable from100mm to a maximum height of 350mm Part No LP71502

Description 1 Ton (1000Kg) Scissor Jack

TUV Approved 1 Ton Scissor Jack TUV/GS Certified 1 Ton (1000kg) Scissor Jack with a large base for stable jacking. Supplied with a long reach handle for easy winding. Adjustable operating height from 100mm to a maximum height of 350mm.

Part No ST-103

Description TUV Approved 1 Ton Scissor Jack

Premium Power Foot Pump High capacity twin cylinder foot pump with large foot pad and heavy duty steel frame. High precision gauge with 0-100 (0-7 bar) psi scale and 50cm long hose with 3 adapters for cars, bicycles, balls, etc. Weight: 1.7kg Dimensions: 54mm x 120mm Part No EFP001

With 3 Adaptors

Description Premium Power Foot Pump

Wall Mounted Wheel Storage Brackets Ideal for keeping wheels and tyres out of the way and stored in a safe location. These wall mount brackets are designed for a maximum wheel and tyre width of 205mm. 4 Piece kit Part No LP15959

Description Wall Mounted Wheel Storage Brackets - 4pc

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Wheel Accessories

85

Telescopic Wheel Brace High quality Telescopic Wheel Brace that extends from 330mm to 500mm. This wheel brace is supplied with 2 different sockets covering the following hex head sizes: 17mm, 19mm, 21mm and 23mm. Part No. STO9DS

Description Telescopic Wheel Brace

4-Way Folding Wheel Brace This Four Way Folding Wheel Brace folds up and fits neatly into the storage pouch provided when not in use. The folding legs lock into position to allow use as a four way cross type wheel brace. Supplied in a chrome finish with 4 different hex head sizes: 17mm, 19mm, 21mm and 23mm. Part No. ST10F

Description Four Way Folding Wheel Brace

24/27mm Heavy Duty Twin Hex Wheel Brace Heavy duty chromed 2 piece wheel brace with 24mm and 27mm Hex size sockets. Ideal for most 4x4s and commercial vehicles. 395mm long and is supplied with a 400mm Tommy Bar attachment for easy storage when not in use. Part No. Description ST2427TB Twin Hex Wheel Wrench - 24/27mm

21/22mm Wheel Brace Socket This socket is supplied with a ½” drive and with 2 different hex head sizes 21mm and 22mm. 21mm is ideal for many Japanese and Korean vehicles. 22mm can be used on some of the new Vauxhalls, Land Rover and Range Rover models. Part No. SKT2122

Description Wheel Brace Socket - 21/22mm

Spare Wheel Storage/Carrying Bag Spare wheel bag manufactured from very strong and durable heavy duty nylon with strong handles and heavy duty zips. Ideal for storing or carrying spare wheels. Colour: Black - available in 3 sizes. Part No. LP15952 LP15953 LP15954

Description Small Spare Wheel Bag - 580mm x 200mm - Fits wheel and tyre size up to 195/40R17 Medium Spare Wheel Bag - 660mm x 200mm - Fits wheel and tyre size up to 195/50R18 Large Spare Wheel Bag - 700mm x 230mm - Fits wheel and tyre size up to 225/40R19

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


86

Wheel Accessories for Classic Minis

High Quality Classic ‘MINI’ Wheel Studs These studs are manufactured in a facility that conforms to TS16949 & ISO14001 standards. They have been carefully designed and manufactured with both safety and quality in mind using high grade, high tensile (30MnB3) steel for 10.9 tensile strength.

B A

E

Thread Length

BULLONI DESIGNAZIONE

PRIGIONIERI

D

(STUBS)

PR6/P

C

Spline Dia

MATERIALE E TRATTAMENTO: VEDI NOTE (MATERIAL AND TREATMENT: SEE NOTE)

DATA

MODIFICHE

DATA

(MODIFICATIONS)

(DATE)

DWG n°:

005-p.dwg

ISO-ST005 ISO-ST006 ISO-ST007 ISO-ST008

A

3/8” UNF 3/8” UNF 3/8” UNF 3/8” UNF

U.T.

Length inc Spline (mm)

DISEGNATORE

24.11.2015

Spline Diameter A.L. (mm)

NS802A-CW

Part No NS801A NS802A-CW NS801A-OE NR1281A-OE OE = Open Ended

FIT

N O

C

D

E

36 50 60 79

10.3 10.3 10.3 10.3

14 14 14 14

5 5 5 5

\\pserver\qualita\02 disegni\per tipo\prigionieri\005-p.dwg

24 26 28 32

NS801A-OE

Thread Size Seat 3/8” UNF 60° 3/8” UNF 60° 3/8” UNF 60° 3/8” UNF Radius CW = Captive Washer

Stud head separated from body on installation

QUALITY CLASSIC MINI TRILOCK WHEEL LOCKS ALLOY WHEELS Mini 1959➜1988 Mini 1988➜2000 STEEL WHEELS Mini 1959➜1988 Mini 1988➜2000

NR1281A-OE

Hex Overall (mm) Length (mm) 17 17 17 17

• Not manufactured to any recognised quality control standards. • Produced from inferior and poor quality materials. • Coated in a thin black zinc with very low corrosion resistance.

Head Head Diameter Thickness (mm) (mm)

B

PERCORSO SU PC:

CLASSIC MINI WHEEL NUTS

NS801A

E CISI

An example of a ‘failed’ aftermarket Mini wheel stud

Length inc Spline

CLIENTE

PR6/P

(REVIEWS)

APPROVED BY

GROPPO MATTEO

CODICI

Part No

ED

N° REV.

000

INTERNI

REVISIONI

A

10.9

Thread Size

PR

Stud located in drive flange wheel hub assembly

TENSILE STRENGTH

Threaded Length (mm)

G IN E E R

FOR

MATERIAL: High tensile 30MnB3 steel TENSILE STRENGTH: 10.9 COATING: Zintec 200 - salt spray corrosion tested for 1000 hours ASTM-B117 THREAD: 3/8”UNF - Imperial

)

+0,1 -0

•E N

T E C H N I C A L S P E C I F I C AT I O N

0,3+0,1 -0

34 31 18 18

Seat Flat Seat with shank 60° Seat 60° 60°

THREAD LOCK

Part No AFH HFH/B Part No OFH OFH

High strength thread lock suitable for all metal threaded assemblies to prevent loosening of vibrating parts. Part No. Description 1495032 10ml Thread Lock

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Wheel Accessories

87

High Security Spare Wheel Locks Thefts of spare wheels from pick-ups, vans and light commercial vehicles is a relatively easy crime to commit and is on the increase. Replacing a spare wheel and tyre is an expensive exercise and extremely inconvenient if you need the use of a spare and it is not there. We are pleased to introduce a range of spare wheel locks that will present a potential thief with a really difficult locking system to try and remove. Most vehicles fitted with a spare wheel that is located under the rear of the vehicle (4x4s & pick-ups) usually store the spare wheel in a cradle that is raised and lowered by a cable assembly. Vehicle manufacturers using this method often incorporate a locking system, however this is easily defeated when a thief gets under the rear of the vehicle and simply cuts the cable which then automatically lowers the cradle. Our spare wheel lock actually locks the wheel to the underside of the vehicle via a bracket which in some cases we supply to ensure a very high level of security. Make

Model

Year

Tyre Dimension

Wheel Type

Part No

FIAT Fullback 2016➜

All

Alloy or Steel

FT104

FORD Ranger 2012➜

All

Alloy or Steel

FT102

HYUNDAI Tuscon 2005➜

235/60 R16

Alloy

FT26

MITSUBISHI L200 2006➜

All

Alloy or Steel

FT104

NISSAN Nivara 2004➜2015

All

Alloy or Steel

FT103

TOYOTA Hi-Lux 2005➜

All

Alloy or Steel

FT101

FT26 Hyundai Tucson

Make

Model

FT102 Ford Ranger

Year

VOLKSWAGEN Amorak 2009➜ Tiguan 2008➜

Transporter T4

FT103 Nissan Nivara

Tyre Dimension

Wheel Type

Part No

All

Alloy or Steel

FT107

145/80 R18

Steel

FT02

1991➜2003

All

Alloy

BIA/AA

Transporter T4 Caravelle (19mm Hex)

1991➜2003

All

Alloy

BIA/AB

Transporter T4 Caravelle (17mm Hex)

1991➜2003

All

Steel

BIA/A

Transporter T5

2003➜

All

Steel

BIA/A

Transporter T6

2016➜

All

Steel

BIA/A

FT107 Volkswagen Amorak

FT02 Volkswagen Tiguan

BIA/AA (19mm Hex) BIA/AB (17mm Hex)

BIA/A (19mm Hex)

52mm Thread

90.5mm Thread

17 or 19mm Hex available

19mm Hex

Both supplied as a single locking bolt and key.

If your vehicle is not listed please contact us as we have a number of new models under development. Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


88

Carriage Terms, Conditions & Information 7 WESTERN ISLES

SHETLAND & ORKNEY

7

ZONE 1 BLUE ZONE INVERNESS

ZONE 2 SCOTTISH HIGHLANDS

PETERHEAD

2

ABERDEEN

ZONE 3 NORTHERN IRELAND

DUNDEE

GLASGOW

ZONE 4 CHANNEL ISLANDS

EDINBURGH

ZONE 5 ISLE OF MAN ZONE 6

3

IRELAND

ZONE 8

CARLISLE

5

1

ISLE OF MAN

ZONE 7 SCOTTISH ISLANDS

NEWCASTLE -UPON-TYNE

NORTHERN IRELAND

6

LEEDS MANCHESTER

IRELAND

ISLE OF WIGHT BIRMINGHAM

CARDIFF

HAZARDOUS GOODS AEROSOLS AND PAINTS Note: All aerosols, paint products and flammable liquids are required to be sent by Carrier and NOT Royal Mail/Post.

Carriage Terms, Conditions & Information Please read all of the below: • We use a variety of carriers to try and ensure that the best possible service and price are achieved. Auto Inparts cannot guarantee delivery times and dates stated by carriers. We cannot guarantee next day delivery. • Auto Inparts reserve the right to change carrier and carriage charges at any time and without prior notice. • Maximum box weight sent by carrier is 25kg per box. • We try and ship all orders same day however this depends upon workload in the warehouse and therefore cannot guarantee same day dispatch. • Carriage prices do not include VAT. • All items we send use a ‘signed for’ service and are tracked where the service is available.

TRURO

EXETER

PLYMOUTH

LEIGHTON BUZZARD

LONDON SOUTHAMPTON

4

8 ISLE OF WIGHT

CHANNEL ISLANDS

A surcharge may be incurred when shipping to customers who are: a. not available to sign for goods. b. not in when carrier calls. c. private individuals (your retail customers) who we have been asked to ship goods to and who are not in when the courier calls. If a surcharge is levied on Auto Inparts because of points a, b and c above we will pass this charge on to yourselves.

Carriage Charges UK Mainland Only • All orders over £150 will be shipped carriage free if they are under 25kg in weight. • All single item orders over £150 will be charged at £7.95. • All orders under £150 will have carriage charged at £7.95 or £4.95 depending upon weight and number of boxes. • Maximum box weight sent by carrier is 25kg per box. • All orders over 25kg price on request.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


Carriage Charges

89

ZONE 1 BLUE ZONE (see map) ZONE 2 SCOTTISH HIGHLANDS

WEIGHT VALUE UP TO 2.0KG PER PACKAGE* UNDER £30 2.0KG TO 25KG PER BOX UNDER £150 OVER £150 BOXES AND PALLETS OVER 25KG

MAP ZONE 1 1 1 1

COST £4.95 £7.95 FREE PRICE ON REQUEST

SERVICE ROYAL MAIL NEXT DAY CARRIER

WEIGHT VALUE UP TO 1.5KG PER PACKAGE* UNDER £150 1.5KG TO 2.0KG PER PACKAGE* UNDER £150 2.0KG TO 10KG PER BOX UNDER £150 10KG TO 25KG PER BOX UNDER £150 2.0KG TO 10KG PER BOX OVER £150 10KG TO 25KG PER BOX OVER £150 BOXES AND PALLETS OVER 25KG

MAP ZONE 2** 2** 2** 2** 2** 2** 2**

COST £4.95 £6.95 £18.75 £26.25 £11.25 £18.75 PRICE ON REQUEST

SERVICE ROYAL MAIL ROYAL MAIL 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER

CARRIER

These following post codes are included in Zone 2 AB31 - AB38 AB41 - AB45 AB51 - AB56 FK19 - FK21

HS1 - HS9 IV1 - IV28 IV30 - IV32 IV36

IV40 - IV49 IV51 - IV56 IV63 KA27 - KA28

KW1 - KW3 KW5 - KW17 PA20 - PA38 PA41 - PA49

** Post Codes include: HS1 - HS9 (Western Isles) KW15 - KW17 (Orkney Islands) ZE1, ZE2, ZE3 (Shetland Islands)

ZONE 7** SCOTTISH ISLANDS ZONE 3 NORTHERN IRELAND

ZONE 4 CHANNEL ISLANDS

ZONE 5 ISLE OF MAN

ZONE 8 ISLE OF WIGHT Key: * Package size: 35cm wide, 16cm deep, 45cm long ** Check Post Code

IRELAND

WEIGHT 2.0KG TO 25KG 2.0KG TO 25KG 2.0KG TO 25KG 2.0KG TO 25KG

PH30 - PH44 PH49 - PH50

PRICE ON REQUEST

WEIGHT VALUE UP TO 1.5KG PER PACKAGE* 1.5KG TO 2.0KG PER PACKAGE* 2.0KG TO 25KG PER BOX UNDER £150 2.0KG TO 25KG PER BOX £151 - £300 2.0KG TO 25KG PER BOX £301 - £500 2.0KG TO 25KG PER BOX OVER £500

MAP ZONE 3 3 3 3 3 3

COST £4.95 £6.95 £12.50 £15.00 £20.00 PRICE ON REQUEST

SERVICE ROYAL MAIL ROYAL MAIL 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER

WEIGHT VALUE UP TO 1.5KG PER PACKAGE* 1.5KG TO 2.0KG PER PACKAGE* 2.0KG TO 10KG PER BOX UNDER £150 10KG TO 25KG PER BOX UNDER £150 2.0KG TO 10KG PER BOX OVER £150 10KG TO 25KG PER BOX OVER £150 BOXES AND PALLETS OVER 25KG

MAP ZONE 4 4 4 4 4 4 4

COST £4.95 £6.95 £52.50 £63.75 £45.00 £56.25 PRICE ON REQUEST

SERVICE ROYAL MAIL ROYAL MAIL 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER

WEIGHT VALUE UP TO 1.5KG PER PACKAGE* 1.5KG TO 2.0KG PER PACKAGE* 2.0KG TO 10KG PER BOX UNDER £150 10KG TO 25KG PER BOX UNDER £150 2.0KG TO 10KG PER BOX OVER £150 10KG TO 25KG PER BOX OVER £150 BOXES AND PALLETS OVER 25KG

MAP ZONE 5 5 5 5 5 5 5

COST £4.95 £6.95 £17.50 £25.00 £11.00 £18.50 PRICE ON REQUEST

SERVICE ROYAL MAIL ROYAL MAIL 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER 2-3 DAYS CARRIER

WEIGHT VALUE UP TO 1.5KG PER PACKAGE* UNDER £150 1.5KG TO 2.0KG PER PACKAGE* UNDER £150 2.0KG TO 25KG PER BOX UNDER £150 2.0KG TO 25KG PER BOX OVER £150 BOXES AND PALLETS OVER 25KG

MAP ZONE 8 8 8 8 8

COST £4.95 £6.95 £17.45 £9.45 PRICE ON REQUEST

SERVICE ROYAL MAIL ROYAL MAIL NEXT DAY CARRIER NEXT DAY CARRIER CARRIER

European (EC) Countries Only (Except Ireland)

Overseas Shipping ZONE 6

PA60 - PA78 PH1 PH5 - PH10 PH15 - PH26

VALUE UP TO £150 £151 TO £300 £301 TO £500 OVER £501

MAP ZONE 6 6 6 6

COST £15.00 £20.00 £25.00 PRICE ON REQUEST

WEIGHT COST UP TO 1.0KG £13.50 1.0KG TO 1.5KG £16.85 2.0KG TO 2.0KG £18.95 OVER 2.0KG PRICE ON REQUEST

Auto Inparts Ltd reserve the right to change and amend carriage charges without prior notice.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


90

Trading Terms & Conditions Conditions of Sale

Returns/Shortages

• When ordering any items from Auto Inparts Ltd please note that you will be subject to our ‘Conditions of Sale’, a detailed copy of which will be supplied to you upon request and can be found on the back of every previous invoice and delivery note.

• Claims for shortages or damages cannot be entertained unless the company is advised in writing within 7 days of delivery. Goods will not be accepted for return unless our agreement has been obtained.

• You can also view our Conditions of Sale on the back of any of our invoicesor delivery notes. Please note it is your responsibility to read these and by accepting goods from us you also accept our Conditions of Sale. • We do not accept customers debit notes unless approved by Auto Inparts Ltd.

• Items are to be returned carriage paid. We do not operate a collection servicefor returned items. Credit for carriage subject to negotiation. • All returned items must be in saleable condition in original packaging with all fittings. We reserve the right to charge to replace product packaging and fixings if damaged or not returned. • Special orders cannot be returned.

• We recommend that all orders are placed in writing either by fax on 01525-382718 or by e-mail to sales@autoinparts.com to ensure that correct parts are supplied.

• All returned items must be supplied with relevant paperwork. Proof of return delivery should be retained by the customer. The above returns information does not affect your statutory rights.

If you place an order by phone and you believe we supplied the incorrect part we will not be held responsible for having sent out the incorrect item. You used the option to phone in the order which we are happy to accept, however if mistakes are made it cannot be proved either way what was said. Our customers generally insist that they are correct and our sales staff generally insist they are correct, so we are in a no win situation and that is why to eliminate any of these issues we recommend that orders are faxed or e-mailed to us. This then removes any uncertainty. It will be the customer’s responsibility to pay for return carriage to AIL for credit of these goods if they relate to the above situation.

• Claims for full credit and carriage on returns will not be accepted if the parts fit but the customer cannot install the parts or decides he does not want them when they are delivered.

Payment • 30 days from date of invoice for account holders only • Interest will be charged at the rate of 8% p.a. for all late payments. Please note this will be enforced as we are not a bank. • All cheques should be made payable to Auto Inparts Ltd • Most major credit cards accepted - It is the customer’s responsibility to ensure that sufficient funds are available when placing an order. Should your credit card “Decline” we will advise you and await further instructions but orders and the allocated stock will only be held for 5 working days. AIL is not responsible for any costs that are incurred in crediting customers’ cards if any goods are out of stock or the order is cancelled for whatever reason. • No settlement discount is available • Title of the goods does not pass until payment has been made in full.

Prices • All prices stated do not include VAT or carriage.

• A handling charge of 25% will be implemented on all returned items unless the product does not fit or has a defect. Please see “Guarantee” below.

Special Orders • No refunds or returns accepted on special orders. • Carriage on special orders will be charged if your customer cancels. We recommend that you make the customer pay for the carriage when they order the part, so if they cancel you still have the carriage cost covered.

Out of Stock Items & Back Orders •

If a customer operates a Back Order System any orders over £150 will be shipped carriage free regardless of whether the order is complete or not. The missing items, if there are any, will be held on “back order” and shipped carriage free with the customer’s next order when the items come into stock. Please note: It is the responsibility of the customer to cancel any back orders they no longer require in writing otherwise the back order item/parts will be supplied.

If a customer operates a No Back Order System and an item which they have ordered is out of stock, thus reducing the value of the order below £150, then carriage will be charged on this order. In this case any out of stock items WILL NOT be supplied when they become available.

Discontinued Items

• To the best of our knowledge all prices are correct at time of going to press.

Weights & Measurements

Warranty Issues

• All weights, measurements and temperature ratings stated are approximate.

If you have a warranty issue the parts in question will need to be returned for evaluation before any claim is considered or accepted. You must also provide proof of purchase.

• We reserve the right to change prices at any time and without prior notice.

If a customer orders a discontinued item they will be advised on their delivery note and in the first instance if the order is reduced to below £150, carriage will not be charged. However, should a customer re-order the discontinued item thus reducing the value of the order below £150, then carriage will be charged on this order.

Please make sure you read our ‘Product Guarantee’ information on page 2.

Sales: 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com


INDEX AIR FILTERS & ACCESSORIES Breather Filters Cotton Reel Anti Vibration Bush Fixing Brackets Fixing Clips Steel Sleeves Universal Cone Filters Universal Alloy Tubes AIR FRESHENERS ALLOY WHEEL PAINT ALLOY WHEEL REPAIR KITS ALLOY WHEEL REPAIR PUTTY CALIPER PAINT Caliper Paint Kits & Brake Cleaner CAR COVERS CLOCKS & GAUGE PODS COLD AIR DUCTING COLD AIR FUNNELS DETAILING & VALETING PRODUCTS Carnauba Wax Clay Bar Flatting & Polishing Compounds Hi-Res Polish Instant Detailer Interior Detailer Plastic Restorer Polishes PVC Restorer Sanding Discs, Attachments & Accessories Shampoo & Wax Tyre Detailing Gel Valeting Accessories, Polishing Pads etc. Wheel Cleaner Wheel Wax ENGINE ENAMEL EXHAUST TIPS & EXHAUST ACCESSORIES Exhaust Tips 6 Step Pipe Reducer Exhaust Joiners and Connectors Exhaust Mounts Exhaust Pipe Sections Flexible Exhaust Connectors FIRE EXTINGUISHER GENERAL ACCESSORIES Anchor Points Antennas Cable Clips and Clamps Elasticated Net Pocket Fuses Grille Mesh Hooks and Straps Horns Mud Flaps Permit & Ticket Holders Plastic Containers, Funnels, Pumps & Spouts Pumps Seat Belt Alarm Stopper & Extension Sockets Sender Units & Adaptors Steering Wheel Knobs & Covers Sunshades and Windscreen Covers Sunvisors Waterproof Bag Wide Angle Window Lens

91 54-61 54 54 54 59 55 54 55 27 18-19 17 16 15 15 45 72 60-61 61 3-11 4 6 7&9 4 4 5 5 8 8 9 3 5 10-11 3 6 16 46-51 46-47 51 48 51 49 50 28 71, 73-82 78-79 73 74 79 73 77 79 77 76 82 80 73 82 73 75 81 81 79 71

HEADLIGHT LENS RESTORATION KIT 12 HEADLIGHT LENS TINTING 13 Lens Tinting Kits & Tinting Products 13 HEAT PROTECTION PRODUCTS 52-53 Alloy Heatshield Sheet 52 Cable Ties 53 Heatwrap 52-53 Heat Reflector Shields 53 HI-TEMPERATURE PAINT 14 XHT Paint & Lacquer 14 LIGHTING 62-63 Flexible LED Lights 62 Fluorescent, Halogen, LED and SMD Lights 63 LED Screw Lights 62 MIRRORS 70-71 NUMBER PLATE HOLDERS & ACCESSORIES 39-40 REPAIR & RESTORATION 21-25 Bumper Repair Putty 23 Fillers 22-23 Hardener & Accessories 23 Primers 24-25 Surface Deep Cleaner 25 RODENT REPELLANT 27 SPRING AIDS 28 SEAT & INTERIOR PROTECTION 41-45 2-in-1 Multi Purpose Mat & Bag 45 Boot and Cargo Mats 43-44 Floor Mats and Mat Clips 44 Seat Protectors 41-43 SILICONE HOSES 56-59 Alloy Hose Joiners (Beaded) 59 Hose Clamps 58 SWITCHES & SOCKETS 64-69 Plugs & Sockets 66 Sockets & Lighter Elements 67 Sockets & Mounting Pods 68-69 Switches 64-65 TOUCH-UP STICKS 19-20 UBER AIR - AIR-CONDITIONING PURIFIER 26 VEHICLE BODY PROTECTION & STYLING 29-38 Archguard 34 Body and Bumper Guards 29-30 Bumper Corner Protectors 30 Chrome Detail Trim 31-32 Chrome Detail Foil 32 Chrome and Black Letters, Numbers & Symbols 33 Detail Film 38 Door Guards 34 Edging Trims & Seals 35 Protection Films 36-37 Sillguard 34 Side Moulding Kits 37 WHEEL ACCESSORIES 83-87 Foot Pump 84 Nut & Bolt Head Covers 83 Scissor Jacks 84 Spare Wheel Locks 87 Spare Wheel Storage Bag 85 Valve Caps 83 Wall Brackets 84 Wheel Accessories for Classic Minis 86 Wheel Brace & Sockets 85 CARRIAGE TERMS, CONDITIONS & INFORMATION

88-90


Auto Inparts Ltd Unit L2, Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Beds, LU7 4UH, UK Tel: 01525 382713 Fax: 01525 382718 Email: sales@autoinparts.com Web: www.autoinparts.com

Ai catalogue pages 2017 low res