__MAIN_TEXT__

Page 1

Oil WATER BASED HYDRAULIC FLUIDS  Motion Compensated Control Fluids  1014 BOP Control Fluids  1015 Subsea Production Control Fluids  1014, 1016 System Cleaner & Leak Dies  1016 LUBRICANTS & EQUIPMENT Compounds & Pipe Dopes  Valve Lubricants & Sealants  Stick Grease Guns & Fittings 

1017, 1035 1017 – 1018 1019

MUD PUMP EXPENDABLES Seats, Springs, Liners & Pistons  1020 – 1021 Pulsation Dampener, Mud Gauge  1021, 1023 BOP Parts  1021 Pump & Mud Buckets  1023 Mud Desilter  1023 Pipe Wipers, Tongs & Elevator Straps  1040 OIL & MUD TESTING EQUIPMENT Instrumentation & Recorders  1030, 1037,1040 Test Pump, Baffle Plates  1038 1038 Tool Joint Identifier  VALVES Valves  Dry Break Couplings 

1020 – 1023, 1038 1040

19

Gas

PIPING Pup Joints, Couplings & Swaged Nipples  1024 Bull Plugs  1025 Hammer Unions  1025 – 1030 Swivel Joints  1031 – 1032 Repair Clamps  1040 Victaulic Couplings  1040 API Flanges  1041 API Ring Gaskets  1042 – 1045 HAND & POWER TOOLS Chain, Striking & Wheel Wrenches  1032 – 1035 Brushes  1035, 1039 Stiffy Poles  1036 110V Power Tools  1039 Non-Sparking Power Tools  1039, 1046 – 1047 Open Side Vices  1040 PETOL TONGS Chain Type  Rig Wrenches  Chain Vices 

1034 1034 1035

PRODUCTION EQUIPMENT  Rod Clamps & Stuffing Boxes  BOP & Pumping Tee 

1036 1036


19

1014

Compensator/Tensioner & Subsea Production Fluids Compensator/Tensioner Fluids

Control Fluids – Subsea Production

Erifon 818 Motion

HW740R Series

• Explosion resistant water based hydraulic fluid • For use in offshore riser tensioner, motion compensator, drill string compensator, crown compensator systems and in tension leg platforms • Compatible with each other • Excellent stability and compatibility with materials used in offshore equipment • Fire and explosion resistant – high compression ignition ratio • Efficient heave/motion compensation even in cold climates • Excellent ferrous and non-ferrous corrosion protection • Vapour phase corrosion protection • High performance anti-wear and antiscuffing properties (‘stiction’ resistant) • Resistant to microbial contamination • Tested to stringent global environmental acceptability requirements • Manufactured to NAS1638 class 8 or better cleanliness • Free fluid monitoring program ensures long service life • Industry standard fluids and meets equipment manufacturer requirements • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C

• High performance, high temperature water based hydraulic fluids • Used in modern open and closed loop subsea production control systems and in BOP control systems • Compatible with each other and offers excellent technical performance • Fluids differ in glycol content to ensure optimal response times in all geographical regions • Specified for high pressure and high temperature wells • Excellent liquid and vapour phase corrosion protection • Outstanding stability with high levels of seawater ingress • Resistant to microbial contamination • Fluorescent dye for leak detection • Meets stringent global environmental acceptability regulations • Free fluid monitoring program ensures long service life • Manufactured to NAS1638 class 6 or better cleanliness • Operating temp. range: -25°C to 180°C (-13 to 356°F) • ISO13628-6 tested and approved for use by major equipment, umbilical, DCV and DHSV manufacturers • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C

Product Code

Size

Part Number

818 818TLP 818 818TLP

205ltr 205ltr 1,000ltr 1,000ltr

99940013 50000101 178026 282282

Product Code

Size

Part Number

HW740R HW740R HW740R

25ltr 205ltr 1,000ltr

282283 99940020 135484

Control Fluids – Subsea Production

Control Fluids – Subsea Production

HW500 Series

HW443 Series

• High performance water based hydraulic fluids • Used in open and closed loop subsea production control systems and as industry standard fluids specified by equipment manufacturers • Compatible with each other and offers the same excellent technical performance • Fluids differ in glycol content to ensure optimal response times in all geographical regions • Excellent ferrous and non-ferrous corrosion protection properties • Extreme pressure and anti-wear lubrication properties • Resistant to microbial contamination • Tested to stringent global environmental acceptability requirements • Free fluid monitoring program ensures long service life • Manufactured to NAS1638 class 6 or better cleanliness • Specified for downhole temperatures up to 90°C/194°F • ISO13628-6 specified, approved for use by major equipment manufacturers • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C

• High performance, high temperature water based hydraulic fluids • Used in open and closed loop subsea production control systems and in BOP control systems • Compatible with each other and offer excellent technical performance • Excellent liquid and vapour phase corrosion protection • High performance lubrication properties and resistant to microbial contamination • Recommended for long term equipment storage • Outstanding stability with high levels of seawater ingress • Free fluid monitoring ensures long service life • Manufactured to NAS1638 class 6 or better cleanliness • Operating temp. range: -25°C to 135°C (-13 to 275°F) • ISO13628-6 specified, approved for use by major equipment manufacturers • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C

Product Code

Size

Part Number

HW525 HW525 HW525 IBC HW540 HW540

25ltr 205ltr 1,000ltr 205ltr 1,000ltr

198916 50000104 99940011 99940003 229841

Product Code

Size

Part Number

HW443R HW443R HW443R IBC HW443ND HW443 ND HW443 ND IBC HW443 HW443 HW443 IBC

25ltr 205ltr 1,000ltr 25ltr 205ltr 1,000ltr – No Dye 25ltr 205ltr 1,000ltr

223905 99940007 99940006 249446 99940008 99940010 99940018 50000109 99940005

The little things, but not every thing. No matter what your thing, get it @ ATOM


Blow Out Preventer, Oceanic Hydraulic Equipment & Lubricant Fluids

19

Preservation Fluids – Oceanic Hydraulic Equipment & Test Kit

Control Fluids – Blow Out Preventer Erifon CLS25 Series

Oceanic EPF Fluids

• Water-based hydraulic control fluids specifically formulated for surface and closed loop/return line Blow Out Preventer (BOP) systems, typically present on jack-up and platform rigs • Erifon CLS fluids are compatible with each other and offer the same excellent technical performance • Fluids differ in glycol content to ensure optimal response times in all geographical regions • Non-sheen alternative to oil based fluids • Meets stringent global environmental acceptability requirements • Excellent liquid and vapour phase corrosion protection • High performance lubrication properties • High resistance to microbial contamination • Stable with up to 50% seawater contamination • Manufactured to NAS1638 class 6 or better cleanliness • Free fluid monitoring program ensures long service life • Industry standard fluids and meet equipment manufacturer requirements • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C • 205ltr

• Oceanic EPF fluids are high quality water based fluids • These ready to use fluids protect the internals of hydraulic systems during long-term storage • Oceanic EPF fluids are compatible with each other, Oceanic HW production control fluids, Erifon BOP and motion compensator fluids • Fluids differ in glycol content to ensure optimal response times in all geographical regions • Recommended for long-term storage • Excellent ferrous and non-ferrous corrosion protection properties • Superior vapour phase corrosion protection • Resistant to microbial contamination • Fully compatible with Oceanic HW Subsea Production Control fluids, Erifon BOP and Erifon motion compensator fluids • No colour taint of subsequent installed control fluid • Manufactured to NAS1638 class 6 or better cleanliness • Meets stringent global environmental acceptability requirements • Fluid monitoring program can optimise free flushing & testing operations

99940009

Control Fluids – Blow Out Preventer

Product Code

Size

Part Number

Fluid Preservation Oceanic EPF Titration Erifon HD Fluids Test Kit

205ltr –

50000105 7404001

Lubricant & Corrosion Prevention Compound – Oceanic Hydraulic Cylinders

HD603HP

Vinbrite DP7/SP20

• A field proven, dilutable, water-based hydraulic fluid • Formulated for use in high pressure open/vent to sea Blow Out Preventer (BOP) control systems • Prevents valves from sticking even after long static periods and improves system life under slow moving high load conditions • Typically diluted in fresh potable water and standard glycol if anti-freeze protection is required • High dilution ratio (100:1 to 50:1) • High performance ferrous and non-ferrous corrosion protection • Extreme pressure and anti-wear lubrication properties • Resistant to microbial contamination • Good mixed fluid stability with hard water (<250ppm) and seawater ingress (10%) • Free fluid monitoring program ensures long service life • Meets acceptance requirements of equipment manufacturers • Store in dry conditions, out of direct sunlight • Storage temperature: 5°C to 40°C

• Combined lubricant and corrosion preventive compound • Suited to the protection of exposed hydraulic cylinder rod surfaces on drilling vessel heave compensators, guideline, marine riser tensioner systems and on surface wellhead valve actuators. • Water based motion compensator and tensioner fluids are readily washed from cylinders by sea spray and hence do not protect external surfaces from corrosion • Vinbrite DP7/SP20’s surface film structure is minute overlapping platelets, giving long term protection and when scraped has the ability to flow back, i.e. “self-healing” • Protective film remains soft over long periods of time and at low temperature • Resists sea spray and is not degraded by strong sunlight or hot climates • Recommended for corrosion and abrasion protection of exposed hydraulic cylinder rods • “Self-healing” long term soft film rust preventive • Resistant to sea spray, hot environments and strong sunlight • Excellent lubricating properties extend seal life • Prevents particulate ingress and minimises abrasion damage • No adverse effect on Erifon motion compensator/tensioner fluids • 25ltr

10841002

Find spill trays, bunds and more spill control products starting on page 93 Product Code

Size

Part Number

HD603HP HD603HP IBC HD603HP ND

205ltr 1,000ltr 1,000ltr – No Dye

50000100 99940019 206057

1800 999 024 | atom.com.au | getit@atom.com.au

1015


19

Lubricants, Wash, Dye & MEG Systems Cleaner – Hydraulic Equipment

Calcium Wash

Erifon Systems Cleaner

Oceanic CW

• Aqueous mild alkaline cleaner with highly effective anti-microbial and detergent properties • At low treatment rates (2%) it is effective against bacteria, fungi and yeast • Breaks down biofilms, oil, grease, dirt and sludge deposits and neutralises acid degradation products • Used as a remedial treatment for contaminated hydraulic equipment or as a preventive treatment to improve hydraulic fluid and system service life. • Recommended for treatment of microbiological contamination in hydraulic systems • Improves operational life of fluids and control systems • Fast acting broad spectrum biocide at 2% treatment rate • Active detergents to breakdown and disperse contamination • Alkalinity neutralises acid degradation products in the system • High foaming to ensure treatment of air and head spaces • Compatible with Oceanic HW fluids, Erifon BOP and Erifon motion compensator fluids • Adaptable flushing procedures depending upon operational requirements • Treatment efficiency checked by free fluid monitoring program • 25ltr

• Readily disperses in seawater • 100% biodegradable • Does not destroy metals and polymers during operation • Soaks into calcium deposits to dissolve them • Can be supplied with dye for visibility • Range of viscosities available for varying applications • Meets stringent global environmental acceptability requirements

Size

Part Number

25ltr 25kg – Low Density 1,000ltr 1,000ltr – Low Density

174373 280904 288501 268809

Oceanic Dye – Red & Yellow/Green • • • • •

50000108

Lubricant & Connector Compact Control Systems & Component Assemblies

Large leaks visible under naked eye Small leaks detected with UV lamps/sensors Soluble in industry standard drilling fluids Enables rapid subsea leak detection 5ltr

Oceanic ACL • Dual purpose, water based, thixotropic, lubricant and connector packing compound • Recommended for subsea control system and component assembly • Barrier properties minimise seawater ingress during connection mating • When applied to seals and packers, Oceanic ACL enables installation of pistons without damage to the cylinder bore • Thixotropic gel remains in place and resists run off. This should be removed prior to mating • Lubricant found within the system after coupling dissolves without affecting control fluid performance • Inhibits corrosion of ferrous metals • No solids formation/accumulation in subsea control systems • Compatible with Oceanic HW Subsea production control fluids, Erifon BOP and Erifon motion compensator fluids • 1kg

Size

Part Number

Fluorescent Yellow/Green Red

Monoethylene Glycol – MEG • Demineralised water and monoethylene mix 50/50 • Monoethylene glycol (MEG) is an important raw material for industrial applications • Primary use of MEG is in the manufacture of polyester (PET) resins, films and fibres • MEG is important in the production of antifreezes, coolants, aircraft anti-icer and de-icers and solvents • 1,000ltr

10807001

Outlet Adaptors – S60 • To suit IBC containers • 2” BSP (F) or male camlock

90510082

1016

90510084

Description

Size

Part Number

Adaptor Outlet

2” BSP Female x IBC Female

90510082

Camlock

2” Male x IBC Female

90510084

272139

The little things, but not every thing. No matter what your thing, get it @ ATOM

177681 281514


Lubricants – Compounds & Sealants Drilling Compound

Thread Compound – Natural

ThredOn™ Copperhead

ThredOn™ Enviro-1

• Recommended for all drill pipe, collars and associated rotary shoulder connections • Good performance in most adverse drilling conditions and hydrogen sulfide environments • Highly recommended for deep drilling and drilling of hard formations • Lead/zinc free

• Extremely water resistant, biodegradable grease • Formulated with natural mineral fillers and environmentally friendly additives • Contains no metals or PTFE • Can adhere to wet joints over a wide temperature range • Protects threads for superior makeup and breakout performance • Light in colour to assure consistent coverage • Used for tool joints, tubing and casings, as well as legs of jack-up rigs • Can be used for storage and thread protection, slides and any highly loaded, slow moving surface • 20kg (44lb)

Size

Part Number 190080 9308001

4.5kg (10lb) 20.5kg (45lb)

154053

Drilling Compound

Thread Compound – Locking

ThredOn™ Z50

• Commonly used for casing, tubing and drilling joint to prevent unscrewing of drill string components during drilling operations • Withstands high breakout torque and vibration • Pot life in excess of 1 hour, even at 37°C • High lubricity • Leak-proof seal • 0.45kg (1lb)

• Designed to promote proper makeup and stress development at recommended torques for deep drilling, drilling of hard formations, directional drilling, break-in of new tool joints and associated high torque applications • Recommended for tool joints, drill collars, and associated rotary shoulder connections • 18kg (40lb)

19

7613001

Lubricant & Sealant – Valves, Pumps & Flanges Desco 111 (HS)

9310001

Drilling Compound – High Pressure ThredOn™ 303 API Modified • • • • • • • •

API modified compound for casing, tubing and line pipe Adheres to wet threads Comprised of mineral oil and lithium complex NLGI grade: 1 Oil viscosity at 40°C (100°F): 140(cSt) Worked penetration: 310/340 ASTM drop point: 260°C (500°F) Temperature range: -18°C to 260°C (0°F to 500°F) • Brown • 22.5kg (50lb)

99790010

• For use in services where H2S and CO2 are present • Can also be used around acid solutions, aliphatic hydrocarbons, sour crude and gas and diesel fuel • Suitable for valves, swivel joints, pumps and flanges • High metal adhesion • Corrosion and water resistant • NLGI grade: 2 • Oil viscosity at 40°C: 1,000 (cSt) • Worked penetration: 265/300 • ASTM drop point: 260°C (500°F) • Temperature range: -29°C to 177°C (-20°F to 350°F)

Description

Size

Part Number

Desco 111 (HS) Single K Stick Desco 111 (HS) Pail Desco 111 (HS) Drum

38 x 267mm 9.0kg (20lb) 54.4kg (120lb)

7625005 7608001 99810006

Thread Compound – Metal Free

Lubricant & Sealant

ThredOn™ 335 T&C Klean Kote

Desco 960 Valve Body Fill

• Developed as a metal-free alternative to API Modified • Adheres to the performance requirements of API Bul 5A3 • Used as a thread sealant and lubricant on line pipe including tubing and casing • Can also be used as a tool joint compound in light duty applications • 16kg (35lb)

• • • • • • • • • •

Formulated for gate valves that contain body cavities Economical body fill that displaces water and other contaminants High metal adhesion to lubricate and seal gates as they enter the body cavity Comprised of mineral oil, inorganic thickener and inhibitors NLGI grade: 2 Oil viscosity at 40°C (100°F): 145(cSt) Worked penetration: 255/265 ASTM drop point: 260°C (500°F) Temperature range: -23°C to 177°C Grey

Size 145749

397g (140z) Cartridge 9kg (20lb) Pail

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number 7626001 7614001

1017


19

Lubricants – Compounds & Sealants Lubricant & Sealant – McEvoy Valves

Lubricant & Sealant Pipeline – D Stick

6661-01 Desco 660

Desco 955

• Hydrocarbon service for McEvoy type valves • A superior gate valve lubricant formulated with 100% synthetic oils and non-soap thickeners • Very effective in gas service (except chlorine, bromine, fluorine and oxygen) • Has excellent metal adhesion, corrosion resistance, EP characteristics and is waterproof • 4.53kg (10lb) Service Recommendations: • Aliphatic hydrocarbons, alkalis, dilute acids, salt water, water, hydrogen sulfide, sour crude and sour gas • NLGI Grade: No. 0-1 • ASTM penetration: 330 – 360 • Colour: dark green • Temperature range: -18°C to 177°C

• Premium synthetic • An all-purpose hydrocarbon-resistant synthetic lubricant containing molybdenum disulfide • Formulated with a solid lubricant (molybdenum disulfide) to provide lubrication to 316°C • Standard lubricant used in gas pipelines Service Recommendations: • Aliphatic hydrocarbons, butane, fuel oil, asphalt, hot gases, hot oil, LPG and natural gas • NLGI Grade: No.4 • Small stick: D • Colour: Silver black • Temperature range: -40°C to 316°C

7631003

7631002

Lubricant & Sealant – Valves, Non-Sour

Lubricant & Sealant – Plug Valves, K Sticks

Desco 600

800XH

• A superior lubricant formulated for resistance to hydrocarbons • Lubricant for non-sour services • Contains 100% synthetic oils with a non-soap thickener • Tacky and resistant to washout in petroleum-based service Service Recommendations: • Aliphatic hydrocarbons, crude distillates, crude oil, diesel fuel, hydrocarbon liquids, kerosene, LPG, lubricating oils and natural gas • NLGI Grade: No.2 • Base oil type: synthetic • Flashpoint: 232°C (COC) • Colour: amber • Texture: tacky, smooth • Temperature range: -29°C to 232°C

• • • •

Description

Part Number

1½” x 10½” – ‘K’ Stick 4.53kg (10lb)

7625003 7601002

18.14kg (40lb)

99810003

6512008

Lubricant & Sealant – Gate Valves

Lubricant & Sealant

Desco 620

601

• “Peanut butter” type of synthetic lubricant/sealant used in gate valves with liquid and gas hydrocarbon service • 100% synthetic fluid base • Also available in a softer version referred to as “creamy” Service Recommendations: • Aliphatic hydrocarbons, alkalis, dilute acids, salt water and water • NLGI Grade: 0/00 • Base oil type: natural and synthetic • Flashpoint: >450°F (232°C) • Colour: brown • Texture: tacky, smooth • Temperature range: -18°C to 149°C • 9kg (20lb)

• Synthetic grease compound that provides a high level of lubrication • Ideal sealant for leaky valves • Reduces valve failure in sand services • Provides optimum resistance to aggressive produced fluids, gases and process chemicals • Temperature range: -20°C to 200°C • 18kg (40lb)

7608002

1018

• • • •

General purpose lubricant and sealant for use in FMC plug valves Designed for use in straight bodied or tapered plug valves Excellent tack and adhesion High level of resistance to aliphatic hydrocarbons, crude distillates, fuel and lubricating oils, sweet or sour gas, kerosene, gasoline, aqueous solutions and water Not suitable for caustic or amine services Temperature range: -7°C to 204°C 38(dia) x 304(l)mm Tan

99800008

The little things, but not every thing. No matter what your thing, get it @ ATOM


High Pressure Lubrication Equipment, Grease Fittings & Accessories Grease Gun – Lever Action, High Pressure

Accessories – High Pressure Greasing

• For J & K sticks or injectable packings • Flow Rate: 1.9g/stroke • High pressure, heavy duty, industrial grade • Screw prime, lever operated Grease Gun Includes: • 254mm (10”) swivel hose assembly and giant buttonhead coupler Hose Includes: • ¼” NPT(m) swivel x 1⁄8” NPT(m) • Length: 450mm • Inside diameter: 1/4”

7619012

7619009

7619014

7619010

Description 7619001 90520062 Description

Max. Pressure

Part Number

Grease Gun High Pressure Stick Hose

10,000psi 10,000psi

7619001 90520062

7619008 Part Number

Giant Head Coupler & 1 1⁄8” NPT (f) Inlet Adaptor Repair Kit, Giant Head Coupler Pressure Relief Tool 1”-14 UNS (f) Connection with ½” NPT (f) Thread Side Port Pressure Release Coupler ¼” NPT (f) Inlet x 1”-14 UNS (f) Outlet Adaptor, Lubrication Fitting Inlet 3⁄4” - 16 UNF (f) Outlet (1”lg. Nut) Steel, Zinc Plated Coupler, Screw Connection – ¼” NPT (m) x 1”–14 UNS (f), 4140 15⁄16” Long Nut Relief Pressure Tool with Bleeder Pressure Retaining Style PR12S8 1”-14

Grease Gun – Air Operated, High Pressure

Vent Cap Fittings – With Giant Button Head

• For size “K” stick sealant (11/2” Dia. x 12” long) • Designed for dispensing valve lubricants and sealants • Sealed-in air motor • 100:1 pumping ratio • Weight: approx 7.7g when loaded • Exhaust is at the rear of the motor, away from the operator • Max. pressure: 125psi Includes: • Shoulder sling • 15,000psi gauge with protector • 1/2”-27 straight swivel on one end and giant buttonhead coupler with plug

• Rated to: 10,000psi • NPT

143196

19

7619008 7619015 7619009 7619010 7619012 7619014 218848

Description

Size

Part Number

Zinc Plated 4140 Zinc Plated 4140

⁄8” 1/2”

7619005 7619004

316 Stainless Steel

1

⁄4”

7619016

316 Stainless Steel

3

⁄8”

7619017

316 Stainless Steel

1/2”

7619018

3

Giant Button Head – Stainless Steel

Find more anti-seize starting page 833

There’s more lubrication equipment in the Lubrication Equipment & Flow Control section, starting page 885

• 316 stainless steel • Rated to: 10,000psi • NPT

Size ⁄8” – C Series 1/2” – C Series 3

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number 7619007 7619006

1019


19

Mud Pump Expendables Valves – O-Ring, Double Angle

Valves – Seat, 3 Webbed, API 5-8

• Specified for all drilling operations up to and exceeding 5,000psi • Patented polyurethane insert is noted for its “Double Angle” 55° seal contact surface, which maintains cylinder priming during pump shutdown • Sizes fit most mud pumps • Polyurethane insert has a shelf life of 5 years • Body is a one-piece design, to give maximum containment of the insert with minimum use of material • Max. operating temperature: 77°C

• • • • •

7922001 Description

Part Number

Valve – API 6 Valve – API 7 Valve – API 8

7906001 7922001 99860047

Investment casting EPD coating Deep carburised wear surface Heavy duty valve design No welding

Description

Part Number

Seat Valve 3 – Webbed API 5 Seat Valve 3 – Webbed API 6 Seat Valve 3 – Webbed API 7 Seat Valve 3 – Webbed API 7 National Pump Seat Valve 3 – Webbed API 8

216279 7906002 7930001 7914002 99860048

Valve – Seat, FKM, 4 Webbed API 7 • Valve for 4 webbed FKM seat API 7

Valves – Plate, API 5-8 • All come with urethane insert • Four piece body • Other sizes available on request

Description Seat 4 – Webbed FKM API 7 Suits Emsco, Gardner Denver & Oilwell Triplex Pumps Seat 4 – Webbed FKM API 7 Suits National 12P160 Triplex Pump Description

Part Number

Valve API 5 Valve API 6 Valve API 7 Valve API 8

129684 7906004 7914001 8114001

Part Number 8128001 8129002

Valve – Seat, Full Open, Mud Max • Suit 12P160 National Triplex Pump

Valve – Plate FMK, Full WEB • • • •

All come with urethane insert Two piece body Max. operating temp: 77°C Valve for a full web FKM seat

99860098

Springs – For Mud Pump Valves

8128002

Valve – Full Open, Mud Max • Specified for all drilling operations up to and exceeding 4,000psi • Body is a two-piece inertia welded design, configured to give maximum containment of insert with minimum use of material • Insert is a lipless 45° seal contact surface with a broad contact area to resist abrasion • Max. temperature rating for the standard polyurethane insert is 170°F / 77°C • Polyurethane insert has a shelf life of 5 years

99860097

1020

Description

Part Number

Stainless Steel Spring Suits Triplex Pump API 5 Carbon Steel Duplex API 6 Carbon Steel Spring API 6 & 7 Carbon Steel Spring API 7 For Emsco FB1600 Pump Carbon Steel Spring API 7 For FKM 12P160 Pump Carbon Steel Spring API 7 For FKM Valve Assembly Carbon Steel Spring API 7 For Emsco Duplex Pump Stainless Steel Spring API 7 Carbon Steel Spring Valve API 7 For Mud Max 5710-115L & 12P160 Carbon Steel Spring API 7 & 8 Duplex Stainless Steel Spring API 8 For 14P220

216281 7938004 7946001 8112002 8127003 7905004 192020 7938002 99860099 7922002 99860050

Call ATOM for mud pump liners, piston rods and other expendables. The little things, but not every thing. No matter what your thing, get it @ ATOM


Mud Pump Expendables – BOP Parts Pistons – Single & Double Acting

Pulsation Dampener Parts

• One-piece bonded design combined with a dual‑durometer polyurethane • Ideal in high pressure and oil based mud applications • For use on triplex mud pumps

• For Hydril Type K20 • 20 Gallon Dampener

Double Acting Piston Single Acting Piston Part Number

5” 51/2” 6” 61⁄2” 7” Rubber Pistons - Complete Assembly 5” – Double Acting Series A, API 1 5” – Double Acting Series B, API 3 5” – Single Acting Series B, Multi-Bore 51/2” – Double Acting Series B, API 3 51/2” – Double Acting Series B, API 4 51/2” – Double Acting Series B, API 5 51/2” – Double Acting Series L, API 6 6” – Double Acting Series B, API 5 61/2” – Double Acting Series B, API 3 61/2” – Double Acting Series B, API 4 61/2” – Double Acting Series B, API 5 61/2” – Single Acting Series L, Multi-Bore 7” – Double Acting Series B, API 3 7” – Double Acting Series B, API 4 Call ATOM For Replacement Piston Rubbers

99860013 8107001 8108001 8132001 8132002 7915002 7948004 99860107 7948001 99860111 7948002 99860104 99860061 7924002 7916002 99860034 7916001 7940002 273316

Parts – Duplex Pump • For Gardner Denver 5” x 6” pumps

1 – SV

2 – SS

3 – GV

Description

4 – GS

5

6 Part Number 7923004 7923003 7923002 7923001 8133007 7944003 7923005 7931002 7931001 8135001

1 – Sand Valve 5 x 6”, 5 x 8” 2 – Sand Seat 5 x 6”, 5 x 8” 3 – Gravel Valve 5” x 6”, 5” x 8” 4 – Gravel Seat 5 x 6”, 5 x 8” 5 – Piston Rod For Gardner Denver 5 x 6” Pump API 5 – Piston Packing Rod For Duplex GD 5 x 6” Pump 6 – Stainless Steel Spring 5 x 6” Gravel Rubber Insert 5 x 6”, 5” x 8” Rubber Sand Insert 5 x 6”, 5 x 8” Gardner Denver Liner 5 x 6”

7912002 Description

Dual Duro Single Acting Pistons

Annular Preventor – Element & Gasket Kit • 133⁄8” Hydril 5,000psi

30000050 Description

Part Number

Element Annular BOP Gasket Head Annular

30000050 7904001

19

Part Number 7912002 7912001 7928002 7928004 7928009 7928006 7928010

Diaphragm Pulsation Stabiliser Rubber Plate Steel Stabiliser Screw Stabiliser Valve Charging Gasket Bottom Plate Hose Charging Dampener

Mud Pump Accessories – Liners & Liner Seals

Description

Size

Pump Model

Part Number

Liner Liner Liner Seal Liner Seal Liner Seal Liner Seal Liner Liner Grayaloy Liner Grayaloy Liner Grayaloy Seal Liner Seal Liner Triplex Liner Liner Liner Liner Zirconia Liner Grayaloy Liner Grayaloy Liner Grayaloy Liner Grayaloy Liner Grayaloy Liner Grayaloy Liner Zirconia Liner Zirconia Liner Liner Liner Liner Liner Liner Liner Liner Packing Liner Packing Liner Packing Liner Packing

5” 6” 6” 51/2” 6” 61/2” 7” 6” 61/2” 7” 6” 7” 5” 51/2” 6” 6” 61/2” 7” 51/2” 6” 61/2” 7” 6” 61/2” 51/2” 61/2” 71/2” 51/2” 51/2” 51/2” 61/2” 61/2” – – –

Skytop Brewster B750F Skytop Brewster B750F Oilwell PT600 Triplex National 12P160 National 12P160 National 12P160 National 12P160 National 12P160 National 12P160 National 12P160 Oilwell A1700PT Oilwell A1700PT Grayaloy A1700PT Grayaloy A1700PT Grayaloy A1700PT Oilwell A1700PT Oilwell A1700PT Oilwell A1700PT National 14P220 National 14P220 National 14P220 National 14P220 National 14P220 National 14P220 Gardner Denver 71/2 x 8” Gardner Denver 71/2” x 8” Gardner Denver 71/2” x 8” C250 Emsco D-300 National C150B Duplex Grayloy MM450 Duplex MM450 Gardner Denver Ideco MM700 Ideco MM700F

8138002 99860126 8139002 8326005 8326002 8326001 8326003 8337002 8336001 8336002 99860065 7913002 99860014 8339001 8335001 99860101 8334001 8333001 99860051 99860052 99860053 99860054 99860100 99860102 8139001 8137001 8138001 8140001 88888844 99860039 88821611 88821612 88894315 88894792 88894921

1800 999 024 | atom.com.au | getit@atom.com.au

1021


19

Oil Testing Equipment, Mud & Kelly Valves & Mud Testing Kit Centrifuge Manual

Valves – Gate, Assembled & Parts

• Designed to test the viscosity of petroleum products • Portable and lightweight, with durable aluminium body • Self lubricating • Fast worm gear drive • Built-in C-clamp for easy mounting

• Solid gate, rising stem, gate valves with resilient seals • Purpose made for mud, cement, fracturing and water service • Designed specifically for abrasive and erosive use • All valves have stainless steel stems • API 6A PSL 1, 2 and 3 available • Gates can be supplied in nickel-plated carbon steel, monel, aluminum bronze or stainless steel • Stainless or carbon steel inserts with nitrile or HNBR elastomer • Factory pressure tested in accordance with API.6A • Can be supplied with flanged end connections, hammer union ends, threaded connections or buttweld ends • Sour service models to NACE MR-01-75 • Available with pressure ratings up to 5,000psi in 2”, 3”, 4”, 5” x 4” and 6” x 4” valve sizes • Full material traceability guaranteed • Supplied with full certification at no extra charge • Suitable for oil and gas lines, wellheads, manifolds and pipelines, crude oil and sour gas, well treating chemicals, drilling chemicals, water flood lines and abrasive drilling mud • Tested to 10,000psi

7130009

Centrifuge Tubes

7130008 Description

7130005 Part Number 7130008 7130007 7130005 7130002

Pear Shaped Long – 100ml Short Cone Tube – 12.5ml

Hydrometer

Description

Part Number 7129001 7129002 7129003 7129004 7129005 7129006 7129007 7129010 7129011 7120006

API 29-41 API 39-51 API 49-61 API 59-71 API 69-81 API 79-91 SG 0.75-0.8 x 0.0005 Hydrometer 1.0-1.22 x 0.005 Hydrometer SG 1.2-1400 Thermometer Tank 0-180F Scoop

Valves – Kelly & Inside BOP • These pipe wipers are offered in single, double, oval and handle bar types • Available in either natural (black) or oil resistant (red) nitrile rubber compounds • Available in solid, split and split rap-a-round configurations • Reinforced metal insert molded to the rubber • Reinforced with a bonded metal ring

Gate Valves Gate Valve Buttweld XXS Gate Valve Screwed NPT Gate Valve Buttweld XXS Gate Valve Buttweld XXS Gate Valve Buttweld XXS Gate Valve Buttweld XXS Gates Gate For Demco Gate Valve Gate For Demco Gate Valve 316 SS Gate For Demco Gate Valve 316 SS Stems Stem For Demco Gate Valve 316 SS Stem For Demco Gate Valve 316 SS Stem For Demco Gate Valve 316 SS Seats Seat For Demco Gate Valve Seat For Demco Gate Valve Seat For Demco Gate Valve Seat For Demco Gate Valve ANSI-600 DM Seal Stems Seal Stem For Demco Gate Valve Seal Stem For Demco Gate Valve Seal Stem For Demco Gate Valve Bonnet Seals Seal Bonnet For Demco Gate Valve Seal Bonnet For Demco Gate Valve Seal Bonnet For Demco Gate Valve

7835006

Working Pressure

Size

Part Number

5,000psi 5,000psi 6,000psi 5,000psi 5,000psi 5,000psi

2” x 2” 2” x 2” 3” x 3” 3” x 3” 4” x 4” 5” x 4”

5806001 5806003 99280017 5806004 5805005 5806006

2,000 – 5,000psi 2,000 – 5,000psi 2,000 – 5,000psi

50mmNB (2”) 80mmNB (3”) 100mmNB (4”)

7834001 7834009 99280005

2,000 – 5,000psi 2,000 – 5,000psi 5,000psi

50mmNB (2”) 80mmNB (3”) 100mmNB (4”)

7834004 7835002 7836010

2,000 – 5,000psi 2,000 – 5,000psi 2,000 – 5,000psi 1,440psi

50mmNB (2”) 80mmNB (3”) 100mmNB (4”) 150mmNB (6”)

7834008 7834010 7835006 7830006

2,000 – 5,000psi 2,000 – 5,000psi 2,000 – 5,000psi

50mmNB (2”) 80mmNB (3”) 100mmNB (4”)

7834005 7835001 7836001

2,000 – 5,000psi 2,000 – 5,000psi 5,000psi

50mmNB (2”) 80mmNB (3”) 100mmNB (4”)

7824011 7835003 7836006

Mud Testing Equipment

Kelly Valve Description

Inside BOP Valves Part Number

Kelly Valve – Upper 73/4”(O.D.) x 65⁄8” Reg LH Pin x Box 658 Regular L/H Kelly Valve – Lower 63⁄8” (O.D.) x 213⁄16” (I.D.) x 41/2” IF Pin x Box Kelly Valve – Lower 5” (O.D.) x 21/4” (I.D.) x 31/2” IF Pin x Box Inside BOP Valve – Gray 41/2”

1022

Description

5806001

7141002 7141001 7141003 7109002

Description

Part Number

Metal Mud Balance Pressurised Fluid Density Measure – Tru-Wate Plastic Mud Measuring Cup Viscosity Mud Funnel Glass Tube Mud Sand Content Drilling Sand Test Kit Content For OFI Mud Test

7138003 99720003 7138002 7138001 99720006 7138007

The little things, but not every thing. No matter what your thing, get it @ ATOM


Mud Pumping Equipment & Parts Mud Pressure Relief Valve – Oteco

Mud Pressure Gauges – Type F

• A metal chart is installed on every valve detailing shear pin selection specifications • Hardened stainless steel stems and liner subs provide corrosion resistance • PRV relief valve parts are interchangeable with Cameron style shear relief valve parts • +/- 10% accuracy

• Built in dampening mechanism to minimise wear and mechanical shock • Heavy duty seals restrict line fluid from entering the gauge mechanism • Gauge mechanism is surrounded by special oil providing resistance to extreme temperatures, as well as vibration and shock • Low pressure plug is installed to prevent gauge case and lens damage • All gauges available for standard, salt water and sour gas • Standard end connection: 2” line pipe threaded female connection • Dimensions: 75⁄8” diameter dial case and 143⁄4” in height • Type D available on request

Description

Pressure

Size

Part Number

2” NPT Female 2” NPT Female 2” NPT Male 3” NPT Male 3” 1502 Male & Female

125 – 500psi 250 – 1,000psi 1,000 – 5,000psi 500 – 5,000psi 10,000psi

50mmNB 50mmNB 50mmNB 80mmNB 80mmNB

99300055 7828003 7828002 7828001 99300017

Mud Pressure Relief Valve – Parts, Oteco • Parts for Oteco pressure relief valves

Description

Pressure

Size

Cushion For Oteco Pressure Relief Valve 2” Cushion For Oteco Pressure Relief Valve 2” Cushion For Oteco Pressure Relief Valve 3” Piston 2’’ + 3’’ Oteco Pressure Relief Valves 50 + Piston For Pressure Relief Valve Oteco 3’’ Stem For Pressure Relief Valve Oteco 2’’ Stem For Pressure Relief Valve Oteco 2’’ Stem For Pressure Relief Valve Oteco 2’’ Stem Shear Pressure Relief Valve Oteco 3’’

125 – 1,000psi 500 – 5,000psi 500 – 5,000psi 1,000 – 5,000psi 500 –2,500psi 125 – 1,000psi 500 – 2,750psi 3,000 – 5,000psi 5,000psi

50mmNB 50mmNB 80mmNB 50 – 80mmNB 80mmNB 50mmNB 50mmNB 50mmNB 80mmNB

Part Number 7828011 7828008 7828005 7829031 7828004 7828010 7828012 7828013 7824008

Pin Shears – For Mud Pressure Relief Valve, Oteco • Parts for Oteco pressure relief valves • Colour coded for different pressure settings • Refer to valve decal pressure plate for rating of shear pins Description

Part Number

Pin Shear Brown For Oteco Pressure Relief Valve No.3 Pin Shear Pink For Oteco Pressure Relief Valve No.4 Pin Shear Yellow For Oteco Pressure Relief Valve No.6 Pin Shear Purple For Oteco Pressure Relief Valve No.8 Pin Shear White For Oteco Pressure Relief Valve No.12 Pin Shear Blue For Oteco Pressure Relief Valve No.16 Pin Shear Red For Oteco Pressure Relief Valve No.20 Pin Shear Grey For Oteco Pressure Relief Valve No.30 Pin Shear Green For Oteco Pressure Relief Valve No.40 Pin Shear Black For Oteco Pressure Relief Valve No.50 Pin Shear Orange For Oteco Pressure Relief Valve No.60

99300048 99300047 7829001 99300049 7829002 7828016 7829003 7829004 7829005 7829006 7829007

Description

Pressure

Size

Type F NPT Male (2”) Type F NPT Male (2”) Exchange Type F NPT Male (2”) Type F NPT Male (2”)

0 – 1000psi 0 – 1000psi 0 – 6000psi 0 – 10000psi

50mmNB 50mmNB 50mmNB 50mmNB

19

Part Number 7324001 7324002 7324003 7324004

Centrifugal Pumps – Magnum Types • Pump H • 21/2” seal

Description

Dimensions

Seal

Part Number

Mech Seal Mech Seal Mech Seal

4” x 3” x 13” 6” x 5” x 14” 8” x 6” x 14”

21/2” 21/2” 21/2”

88821250 11003006 11003008

Std Packed

8” x 6” x 14”

21/2”

11003005

Contact ATOM for the full range of spare parts to suit Type S, Type W & Magnum type pumps. Mud Bucket & Parts • Type MS-V3A • Air operated unit

Hydrocyclone Desilter 4” • 2” victaulic ends • Contact ATOM for desanders and parts for desilter and desanders

99740013

Contact ATOM for Type B reset relief valve parts.

Description

Part Number

Mud Bucket Side Seal End Seal 31/2” End Seal 41/2” End Seal 5” End Seal 51/2” End Seal 57⁄8” End Seal 65⁄8”

99740008 99740012 99740015 99740017 99740009 99740010 99740016 198894

1800 999 024 | atom.com.au | getit@atom.com.au

1023


19

Pipe Joints & Couplings & Swaged Nipples PUP Joints

Couplings – Casing Pipe

• Green: J-55 • Red: N-80

• Green: J-55 • Red: N-80

Description

Size

Length

Colour

Part Number

J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD J55 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD

23⁄8” 23⁄8” 23⁄8” 23⁄8” 23⁄8” 27⁄8” 27⁄8” 27⁄8” 27⁄8” 27⁄8” 27⁄8” 31⁄2” 23⁄8” 23⁄8” 23⁄8” 23⁄8” 23⁄8” 27⁄8”

2’ Long 4’ Long 6’ Long 8’ Long 10’ Long 2’ Long 4’ Long 6’ Long 8’ Long 10’ Long 12’ Long 10’ Long 2’ Long 4’ Long 6” Long 8” Long 10” Long 2’ Long

Green Green Green Green Green Green Green Green Green Green Green Green Red Red Red Red Red Red

50000200 50000201 50000202 50000203 50000204 50000210 50000211 50000212 50000213 50000214 50000215 50000225 50000315 50000316 50000317 50000318 50000319 50000320

N80 EUE 8RD

27⁄8”

4” Long

Red

50000321

N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD N80 EUE 8RD L80 EUE 8RD L80 EUE 8RD

27⁄8” 27⁄8” 27⁄8” 31⁄2” 31⁄2” 31⁄2”” 31⁄2”” 31⁄2”” 41/2” 41/2”

6” Long 8” Long 10” Long 2” Long 4” Long 6’ Long 8’ Long 10’ Long 8’ Long 10’ Long

Red Red Red Red Red Red Red Red Red Red

50000322 50000323 50000324 50000330 50000331 50000332 50000333 50000334 255119 255120

Model

Colour

Size

Part Number

Coupling Casing BTC J-55 Coupling Casing BTC J-55 Coupling Casing BTC J-55 Coupling Casing BTC J-55 Coupling Casing BTC J-55 Coupling Casing BTC J-55 Coupling Casing BTC N80 Coupling Casing BTC N80 Coupling Casing BTC N80 Coupling Casing BTC P110

Green Green Green Green Green Green Red Red Red White

41⁄2” 5” 7” 95⁄8” 133⁄8” 20” 7” 95⁄8” 133⁄8” 95⁄8”

6635002 6635001 6634002 6634001 6633002 6633001 6632003 6632002 6632001 6627001

Swaged Nipples • Carbon steel manufactured from A106 grade B seamless pipe or cold drawn bar which is heat treated in accordance with ASTM A234 • Available: Standard/Schedule 40, XS/Schedule 80, XXS/Schedule 160

Couplings – Tubing • Green: J-55 • Red: N-80

1024

Description

Colour

Size

J55 8RD J55 8RD J55 8RD N80 8RD N80 2.910” O.D. N80 8RD N80 8RD N80 8RD

Green Green Green Red Red Red Red Red

23⁄8” EUE 27⁄8” EUE 31⁄2” EUE 23⁄8” EUE 23⁄8” EUE 27⁄8” EUE 31⁄2” EUE 41/2” EUE

Part Number 6636002 6636001 6635003 6621001 6602001 6615001 6609001 255121

Description

Size

Part Number

STD 2’’ NPT x 1’’ NPT STD 3’’ NPT x 1’’ NPT STD 3’’ NPT x 11⁄2’’ NPT STD 3’’ NPT x 2’’ NPT STD 4’’ NPT x 2’’ NPT STD 4’’ NPT x 3’’ NPT STD 5’’ NPT x 3’’ NPT STD 5’’ NPT x 4’’ NPT STD 6” NPT x 4’’ NPT STD J55 23⁄8’’ EUE 8RD x 2’’ NPT STD J55 27⁄8’’ EUE 8RD x 2’’ NPT STD J55 27⁄8’’ EUE 8RD x 23⁄8’’ EUE 8RD XS 3⁄4’’ NPT x 1⁄2’’ NPT XS 1’’ NPT x 1⁄2’’ NPT XS 2’’ NPT x 1’’ NPT XS 21⁄2” NPT x 2’’ NPT XS 3’’ NPT x 2’’ NPT XS 4’’ NPT x 2’’ NPT XS 4’’ NPT x 3’’ NPT XS J55 31⁄2’’ EUE 8RD x 2’’ NPT X-Over XS J55 31⁄2’’ EUE 8RD x 3’’ NPT X-Over XXS 2’’ NPT x 1’’ NPT XXS 3’’ NPT x 2’’ NPT XXS 4’’ NPT x 2’’ NPT XXS 4’’ NPT x 3’’ NPT

50 x 25mmNB 80 x 25mmNB 80 x 40mmNB 80 x 50mmNB 100 x 50mmNB 100 x 80mmNB 125 x 80mmNB 125 x 100mmNB 150 x 100mmNB 23⁄8’’ EUE x 2’’ 27⁄8’’ EUE x 2’’ 27⁄8’’ EUE x 23⁄8’’ 20 x 15mmNB 25 x 15mmNB 50 x 25mmNB 65 x 50mmNB 80 x 50mmNB 100 x 50mmNB 100 x 80mmNB 31⁄2’’ EUE x 2’’ NPT 31⁄2’’ EUE x 3’’ NPT 50 x 25mmNB 80 x 50mmNB 100 x 50mmNB 100 x 80mmNB

6630006 6630003 6630005 6630004 6630002 6630001 6629006 6629005 6610001 6628003 6628002 6616005 6624006 6624007 6624005 6611007 6624004 6624003 6624002 6628005 99510000 6618007 6618006 6618005 6618004

The little things, but not every thing. No matter what your thing, get it @ ATOM


Bull Plugs & Standardised Hammer Unions Bull Plugs

19

WHY USE Standardised Hammer Unions

• Carbon steel manufactured from A106 Grade B seamless pipe or cold drawn bar which is heat treated in accordance with ASTM A234 • Standard/Schedule 40

ATOM offers a complete line of standard service and sour gas hammer unions with diameters 1” to 12” and working pressures up to 20,000psi. Unions are available with line pipe, tubing threads or buttweld. Positive Sealing Design Hammer union seals vary depending on the pressure and application. All hammer unions provide positive, pressure-tight sealing. Description

Size

Plug Bull XS 2” NPT Plug Bull XS 3” NPT Plug Bull XS 4” NPT Plug Bull XS 23⁄8” EUE 8RD Plug Bull XS 27⁄8” EUE 8RD Plug Bull XXS 11⁄2”NPT Plug Bull XXS 2” NPT Plug Bull XXS 3” NPT Plug Bull XXS 4” NPT

50mmNB 80mmNB 100mmNB 23⁄8” EUE 27⁄8” EUE 40mmNB 50mmNB 80mmNB 100mmNB

Part Number 6623005 6623003 6623001 6628006 6622003 6618003 6618001 6617004 6617002

Bull Plugs – Tapped • Carbon steel manufactured from A106 Grade B seamless pipe or cold drawn bar which is heat treated in accordance with ASTM A234 • Available Standard/Schedule 40, XS/Schedule 80 and XXS/Schedule 160

For low-pressure services (1,000 to 2,000psi) the spherical surface of the male sub and the conical surface of the female sub form a metal-to-metal seal. This ball-and-cone seal remains leakproof even when one surface is slightly pitted or misaligned. Most medium-pressure models (2,000 to 4,000psi) supplement the metal-to-metal seal with a resilient O-ring in the male sub. High pressure unions (6,000 to 20,000psi) feature a replaceable lip type seal ring in the female sub. This primary seal protects the secondary metal-to-metal seal from abrasion and corrosion while minimising flow turbulence. Fast Make-Up & Break Out Three lug nuts and rugged self-locking ACME threads provide fast make-up and break-out regardless of position or space restrictions. Simple Identification Standard service hammer unions are colour coded for quick identification. Sour gas hammer unions are stamped ‘Sour Gas’ using low stress dot stamping and painted with a green zinc-chromate primer unique to sour gas equipment. Interchangeable Parts

Description

Size

STD 4” NPT x 1⁄2” NPT Tapped XS 2” NPT x 1⁄2” NPT Tapped XS 3” NPT x 1⁄2” NPT Tapped J55 XS 23⁄8” EUE 8RD 1⁄2” NPT Tapped J55 XS 27⁄8” EUE 8RD 1⁄2” NPT Tapped XXS 2” NPT x 1⁄2” NPT Tapped XXS 3” NPT x 1⁄2” NPT Tapped XXS 4” NPT x 1⁄2” NPT Tapped

100mmNB 50mmNB 80mmNB 23⁄8” EUE 27⁄8” EUE 50mmNB 80mmNB 100mmNB

Part Number 6623002 6624001 6623004 6628007 6622004 6618002 6617003 6617001

All parts of the same size, pressure rating and figure number are interchangeable except for the Kemper 5” Figure 100/200, this is not interchangeable with ANSON Figure 100/200. Rigid Quality Control The unions ATOM stock are manufactured utilising the finest raw materials, tooling procedures and heat-treating techniques available. Sour gas hammer unions are made in accordance with the National Association of Corrosion Engineers (NACE) Standard MR-01-75 and the American Petroleum Institute’s (API) Standard RP-14E

Swaged nipples allow you to cross over from one pipe size of connection to another. Bull plugs are used for pressure testing to plug off end connections. All these threaded fittings come in STD, XS or XXS depending on working pressure required. Can’t find what you need? Ask ATOM!

Get ‘em @ ATOM

1800 999 024 | atom.com.au | getit@atom.com.au

1025


19

Blanking & Hammer Unions Hammer Union Selection Chart Figure Number

Assembly Colour Key Standard Service

Working Pressure

Nominal Pipe Sizes, mm, Inches NPT

Standard

BW

SCH

• •

• • • • • • • • • • • • •

80 80 80 XXS XXS XXS XXS XXS XXS XXS XXS XXS XXS

Sour Gas

500 500 • 50 100 1,000 N/A • 200 2,000 N/A • 206 2,000 2,000 • 207 2,000 N/A • 400 2,500 2,500 • 400 4,000 4,000 • 602 6,000 6,000 • 1002 7,500 5,000 • 1002 10,000 7,500 • 1003 7,500 5,000 • 1003 10,000 7,500 • 1502 15,000 10,000 • 2002 20,000 N/A 2202 N/A 15,000 All Connections with line pipe threads unless otherwise noted. N/A = Not Available

25mm 1”

32mm 11 ⁄4”

40mm 11⁄2”

50mm 2”

65mm 21⁄2”

80mm 3”

• •

• •

• •

• • •

• • •

• • • •

• •

• •

• •

• • • •

• • • •

100mm 125mm 150mm 200mm 250mm 300mm 4” 5” 6” 8” 10” 12” • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Blanking Union With Cap – 207

Blanking Hammer Union Cap – 207

• • • •

• With Buna O-ring • Fits onto female sub

Pressure rating: 2,000psi Ring seal provides efficient closure Threaded sub is interchangeable with Fig. 200 Also available with buttweld ends

Description

Size

3” Threaded End 4” Threaded End 6” Threaded End

80mmNB 100mmNB 150mmNB

Part Number 6122001 6130001 6146001

Size

Part Number 6106001 6114001

80mmNB (3”) 100mmNB (4”)

Hammer Union – 100

Hammer Union – 200

• • • • •

• Pressure rating: 2,000psi • Used in general service manifold lines, air, water, oil or gas applications • Available in both threaded and buttweld ends • Metal to metal sealing surface • Available in buttweld schedules 40 and 80

Pressure rating: 1,000psi Threaded ends and buttweld Standard subs are threaded for API line pipe Weco interchangeable Also available with buttweld ends 40 and 80

Buttweld Size 50mmNB (2”) 65mmNB (21⁄2”) 80mmNB (3”) 100mmNB (4”) 100mmNB (4”) Buttweld Sch 80 125mmNB (5”) Anson Type 125mmNB (5”) Kemper Type 150mmNB (6”) 150mmNB (6”) Buttweld Sch 40 200mmNB (8”) 200mmNB (8”) Buttweld Sh 80

1026

GAS

Threaded Part Number 6101001 6117001 6125001 6102001 6141200 6118100 281990 6134001 147324 6142001 132915

Threaded

Buttweld Description

Size

Part Number

1” Threaded Ends 11⁄2” Threaded Ends 2” Threaded Ends 2” Buttweld Sch 80 21⁄2” Threaded Ends 3” Threaded Ends 3” Buttweld Sch 80 4” Threaded Ends 4” Buttweld Sch 80 5” Threaded Ends 5” Buttweld Sch 80

25mmNB 40mmNB 50mmNB 50mmNB 65mmNB 80mmNB 80mmNB 100mmNB 100mmNB 125mmNB 125mmNB

6103001 6103002 6111001 99110014 6127001 6135001 6136201 6104001 6144001 99100049 99110030

The little things, but not every thing. No matter what your thing, get it @ ATOM


Hammer Unions Hammer Union – 206

Hammer Union – 602

• Pressure rating: 2,000psi • A Buna-N ‘O’ ring is mounted on the plain sub to provide an additional seal • Subs and nuts are interchangeable with Fig. 200 union • Standard subs are threaded for API line pipe • Sizes of 2” and above also available with buttweld end

• Pressure rating: 6,000psi • Has replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence • Lip-type ring provides a pressure seal and protection for metalto-metal seating surfaces

Buttweld Description 2” Threaded Ends 2” Buttweld Sch 80 3” Threaded Ends 3” Buttweld Sch 80 4” Threaded Ends 4” Buttweld Sch 80 6” Threaded Ends 6” Buttweld Sch 80 8” Buttweld Sch 40 10” Threaded Ends

Size 50mmNB 50mmNB 80mmNB 80mmNB 100mmNB 100mmNB 150mmNB 150mmNB 200mmNB 250mmNB

Part Number 6105001 6144002 6113001 6136101 6121001 6100001 6145001 6141100 6148010 6147005

Hammer Union – 211 • Pressure rating: 2,000psi • Insulating union • Used in production systems with electrolytic corrosive environments • No metal to metal contact between the subs • Laminated insulating rings provide 35 million Ohms resistance across the union • O-ring in male sub provides a positive primary seal • Resilient seal ring in female sub provides secondary protection from corrosion • Available in threaded ends Description

Size

1” Threaded Ends Insulating 2” Threaded Ends Insulating

25mmNB 50mmNB

Buttweld

Threaded Description Hammer Union 602 Threaded Ends 1” Threaded Ends 11⁄4” Threaded Ends 11⁄2” Threaded Ends 2” Threaded Ends 3” Threaded Ends 4” Threaded Ends Hammer Union 602 Buttweld XS 1” Buttweld XS 2” Buttweld XS 3” Buttweld XS 3” Buttweld Sour Gas XS 4” Buttweld XS 4” Sour Gas Buttweld XS Hammer Union 602 Sour Gas Buttweld XXS 2” Sour Gas Buttweld XXS 3” Buttweld XXS 3” Buttweld Sour Gas XXS 4” Buttweld XXS 4” Sour Gas Buttweld XXS

19

Threaded

Size

Part Number

25mmNB 32mmNB 40mmNB 50mmNB 80mmNB 100mmNB

5901001 99100019 5901002 5909001 5902001 5918001

25mmNB 50mmNB 80mmNB 80mmNB 100mmNB 100mmNB

5937003 5903001 5911001 99120012 5935001 99120014

50mmNB 80mmNB 80mmNB 100mmNB 100mmNB

6314001 99110000 6322001 5945002 6330001

Hammer Union – 1002

Part Number 6107001 6107002

• Pressure rating: 10,000psi • Used in high pressure applications for choke and kill lines, cementing and acidizing • Replaceable lip type rubber seal provides primary sealing up to 4”, 5” and 6” have O-ring for primary sealing • Available in both threaded and buttweld ends

Hammer Union – 400 • Pressure rating: 2,000psi – 4,000psi • Used in manifold & line connections, pump suction and mud services • Available in both threaded and buttweld ends • 3” – 12” have O-ring for primary seal • Available in buttweld schedule 80

Description

Size

2” Threaded Ends 3” Threaded Ends 4” Threaded Ends 6” Sour Gas Buttweld XS

50mmNB 80mmNB 100mmNB 150mmNB

Buttweld

Part Number 6115001 6123001 6123002 6339001

Threaded

Description

Size

Part Number

1” Threaded Ends 1” Buttweld XS 11⁄2” Threaded Ends 2” Threaded Ends 2” Buttweld XXS 21⁄2” EUE Threaded Ends 3” Threaded Ends 3” Buttweld XXS 3” Buttweld XXS Sour Gas 4” Threaded Ends 4” Buttweld XXS 4” Buttweld XXS Sour Gas 5” Buttweld XXS 5” Threaded Ends

25mmNB 25mmNB 40mmNB 50mmNB 50mmNB 65mmNB 80mmNB 80mmNB 80mmNB 100mmNB 100mmNB 100mmNB 125mmNB 125mmNB

5904001 5908001 88820548 5912001 5905001 5944001 5928001 5913001 6323001 5936001 5921001 6331001 5929001 6118100

1800 999 024 | atom.com.au | getit@atom.com.au

1027


19

Hammer, Tank, Suction & Air Unions Hammer Union – 1003

Hammer Union – 2202

• Pressure rating: 10,000psi • Misaligning union • Used in air, water, oil, mud, gas service, high pressure manifold and drilling rigs where alignment of piping components is a problem • Replaceable O-ring on male sub provides primary sealing • Available in both threaded and buttweld ends • 5” unions are available in buttweld ends only

• • • • •

Pressure rating: 15,000psi – H2S 2” Buttweld Sour Gas XXS 50mmNB Specially designed for sour gas service Replaceable lip type rubber seal with stainless steel anti extrusion ring • Conform to NACE standard MR-01-75 and API-14E • Available in buttweld ends only

6147001

Tank Union – With Nitrile Seal Ring Buttweld Description

Size

3” Threaded Ends 4” Buttweld XXS 4” Threaded Ends 5” Buttweld XXS

80mmNB 100mmNB 100mmNB 125mmNB

Threaded Part Number 5944002 6140004 5944004 5948002

• Designed to quickly connect mud tanks with flanged connections • Nitrile O-ring provides a compressive non leak seal that limits the line fluid pressure to 150psi • Tank unions accept up to 7° of pipe misalignment • The female sub of the hammer seal union welds to a Schedule 40 / 80 pipe

Hammer Union – 1502 • Pressure rating: 15,000psi • Has replaceable lip-type seal ring made of Buna-N specifically designed to minimize fluid flow turbulence • Lip-type ring also provides a pressure seal and protection for metal to metal seating surface • Recommended for manifold and truck mounting or other installations where high pressure is encountered

Model

Size

8” Buttweld 10” Buttweld 12” Buttweld

200mmNB 250mmNB 300mmNB

Size

Part Number

1” Threaded Ends 2” Threaded Ends 2” Buttweld XXS 2” Sour Gas Buttweld XXS 2” Wye Assembly 3” Threaded Ends 3” Buttweld XXS 3” Sour Gas Buttweld XXS 4” Buttweld XXS 5” Buttweld XXS

25mmNB 50mmNB 50mmNB 50mmNB 50mmNB 80mmNB 80mmNB 80mmNB 100mmNB 125mmNB

5937001 5906001 5923001 6332001 5924001 5915001 5940001 6324001 5916002 99110037

• • • • •

Pressure rating: 20,000psi 2” Buttweld XXS 50mmNB Replaceable lip type rubber seal Available in buttweld ends only

6306001

1028

Figure 50 (4” – 51/2”) Replaceable O-ring seal Choice of end fittings Secondary metal-to-metal seal Socket welded, threaded or hose nipple

Threaded

Description

Hammer Union – 2002

6348003 6348001 6347001

Suction Hose Union – 50 • • • • •

Buttweld

Part Number

Model

Size

4” Threaded Ends 5” NPT Threaded Ends 5” Socket Weld

100mmNB 125mmNB 125mmNB

Part Number 6131001 6131002 6139002

Air-O Union • Shot of rig air inflates tube to seal around pipe • Fast, easy make-up without close alignment • Allows pipe expansion or misalignment without breaking the seal • No nuts, bolts or wrenches required

Model

Size

6” Air-O

150mmNB

6519001

8” Air-O

200mmNB

6519002

10” Air-O

250mmNB

6520001

12” Air-O

300mmNB

6520002

16” Air-O

400mmNB

6345001

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number


Air-O Union Tubes & Hammer Union Accessories Air-O Union Tubes

Hammer Union Plugs – Male/Female

• Air-O FMC

• Used for hydrostatic testing • Can be drilled or tapped to clients request

Model

Size

6” Air-O 8” Air-O 10” Air-O 12” Air-O 16” Air-O

150mmNB 200mmNB 250mmNB 300mmNB 400mmNB

Part Number 6519101 6511001 6511002 6511003 6511103

Hammer Union Wrench HUWE • Wrench heads fit all handles • No need for a hammer to be used to tighten the union with this system, keeping your team safe at work

Male Blind

Fig.

2” 2” 3” 3” 3” 4” 4” 6”

100/200/206 602/1002 100/200/206 602/1002 1502 602/1002 100/200/206 100/200/206

Part Number 207033 207034 207036 207037 207038 207039 207041 207042

Female Blind Male

Female

Model

Size

Size

Type

Part Number

Part Number

Fig. 206 Fig. 206 Fig. 206 Fig. 602 Fig. 602 Fig. 602 Fig. 602 Fig. 602 Fig. 602 Fig. 1002 Fig. 1002 Fig. 1002 Fig. 1002 Fig. 1502 Fig. 1502 Fig. 1502 Fig. 1502 Fig. 1502

3” 4” 4” 2” 2” 3” 3” 4” 4” 3” 4” 5” 6” 1” 2” 2” 2” 2” (Sour Gas) 2” (Wing Nut & Retainer Ring) 3” 3” 4” 5” 2” 2” (Sour Gas)

80mmNB 100mmNB 100mmNB 50mmNB 50mmNB 80mmNB 80mmNB 100mmNB 100mmNB 80mmNB 100mmNB 125mmNB 150mmNB 25mmNB 50mmNB 50mmNB 50mmNB 50mmNB

Blind Blind 1/2” NPT – Ported Blind 1/2” NPT – Ported 1/2” NPT – Ported Blind 1/2” NPT – Ported Blind Blind Blind Blind Blind Blind Blind 1/2” NPT – Ported 11⁄8” – 12” Autoclave 1/2” NPT – Ported

– 99100006 99100007 – – 99100011 – 99100003 5934001 – 5936002 5929103 – 173454 5932002 5932007 99100035 99120001

6128001 – – 91000219 91000002 91000001 5934004 – – 5947001 – 88985686 88830071 277037 5932005 99100038 99100034 99120002

50mmNB

Blind

80mmNB 80mmNB 100mmNB 125mmNB 50mmNB 50mmNB

Blind 9 ⁄16” Autoclave Blind Blind Blind Blind

Fig. 1502

Union

19

Fig. 1502 Fig. 1502 Fig. 1502 Fig. 1502 Fig. 2202 Fig. 2202

260231

5948003 142487 88830136 99110038 154667 197169

5932006 – 5947003 99110039 155226 –

Hammer Union Nuts • Nut is required when installing male blind/tapped plug in place, same size and figure number must match

Hammer Union Wrench – Extension Handles HUWE • To attach to hammer union wrenches • Handles fit all wrench heads

Size

Part Number

36” 42” 46”

207043 207045 207047

Figure

Colour

Size

Pressure

Part Number

200 200 200 206 602 602 602 1002 1002 1002 1002 1502 1502 1502 1502 1502 2202 (Sour Gas)

Light Blue Light Blue Light Blue Light Blue Black Black Black Red Red Red Red Blue Blue Blue Blue Blue Olive

50mmNB (2”) 80mmNB (3”) 100mmNB (4”) 150mmNB (6”) 50mmNB (2”) 80mmNB (3”) 100mmNB (4”) 80mmNB (3”) 100mmNB (4”) 125mmNB (5”) 150mmNB (6”) 25mmNB (1”) 50mmNB (2”) 80mmNB (3”) 100mmNB (4”) 125mmNB (5”) 50mmNB (2”)

2,000psi 2,000psi 2,000psi 2,000psi 6,000psi 6,000psi 6,000psi 10,000psi 10,000psi 7,500psi 7,500psi 15,000psi 15,000psi 15,000psi 15,000psi 15,000psi 15,000psi

6111101 6136003 6144003 6141002 5941101 5927003 5926001 5928002 5936003 5929004 88830073 173452 5946001 5937002 99100013 99110040 259725

1800 999 024 | atom.com.au | getit@atom.com.au

1029


19

Hammer Union Accessories – Seals & Instrumentation Hammer Union Tee Assembly

Hammer Union Seals & O-Rings

• Configuration is run x branch

5924002 Description

Size

Pressure

Part Number

Fig. 1502 – Female x Male x Male Fig. 1502 – Male x Male x Male H2S Fig. 1502 – Female x Male x Female Fig. 1502 – Female x Female x Male Fig. 1002 – Female x Male x Female (1502)

2” 2” 2” 2” 6” x 6” x 2”

15,000psi 10,000psi 15,000psi 15,000psi 7,500psi

99100046 237261 5924002 5924003 282686

Hammer Union Elbow & Wye Assembly

247628 Description

5924001 Pressure

Elbow Target Assembly – 2” Figure 1502 Male x Female Lead Filled 15,000psi Wye – 2” Figure 1502 Male x Female x Female 15,000psi

Part Number 247628 5924001

Hammer Union Crossover Assembly

Description

Part Number

Nitrile O-Ring For 2” Figure 206 Hammer Union O-Ring Seal For 3” Figure 206 Hammer Union 80mmNB O-Ring Seal For 4” Figure 206/400 Hammer Union 100mmNB O-Ring Seal For 5” Figure 1002 Union & 4” 207 Cap 100 & 125mmNB O-Ring Seal For 3” Figure 1003 Weco Union 80mmNB O-Ring 4” to 5” Figure 1003 Hammer Union 100-125mm O-Ring For All Weco Suction Unions 51/2” Seal 1” 25mmNB Buna N Hammer Union Seal 11/2” 40mmNB Buna N Hammer Union Seal 2” 50mmNB Buna N Hammer Union Seal 3” 80mmNB Buna N Hammer Union Seal 4” 100mmNB Buna N Hammer Union Seal 5” 125mmNB Buna N Hammer Union Seal 2” 50mmNB Viton Hammer Union Seal 3” 80mmNB Viton Hammer Union Seal 4” 100mmNB Viton Hammer Union Seal 2” 50mmNB Buna N Stainless Steel Anti Extrusion Ring Figure 2202 Seal 2” 50mmNB Fluoroelastomer Stainless Steel Anti Extrusion Ring Hammer Union Seal 3” 80mmNB 1502 Brass Extrusion Ring Hammer Union Seal 4” 100mmNB 1502 Brass Extrusion Ring Hammer Union

149036 6148002 6148003 6140005 99130000 6140002 8881001 6124003 6124004 6124005 6132001 6132002 99110041 6340001 6340002 6340003 6147002 6147003 99130001 6340007

Instrument Fluid – W8 & W15 • For use in all hydraulic operated weight indicators, torque gauges, pressure gauges and recorders 99090007

197167

Description

Pressure

Part Number

4” 206 Male x 2” 1502 Female 2” 1502 Female x 2” 1502 Female 2” 1502 Female x 3” 1502 Female H2S 2” 1502 Female x 2” 2202 Female H2S 2” 2202 Female x 2” 1502 Male H2S 2” 2202 Female x 2” 1502 Female H2S 2” 1502 Female x 2” 1502 Female 2” 1502 Male x 2” 1502 Male 2” 1502 Male x 3” 1502 Female 2” 1502 Male x 2” 1502 Female

2,000psi 15,000psi 10,000psi 10,000psi 10,000psi 10,000psi 15,000psi 15,000psi 15,000psi 15,000psi

208983 5924102 237296 231366 231367 197167 5924101 5924313 99090006 99090007

Description

Colour

Capacity

Part Number

W15 W15 W8 – Fluid Gauge Indicator W8 – Fluid Gauge Indicator

Red Red White White

1ltr 5ltr 1ltr 5ltr

7139009 8607005 7139008 99680005

Instrument Fluid Hand Pumps • For filling pressure sensators and torque gauges with W15 Fluid

Hammer Union Pressure Sensator & Spare Parts • To suit 2” 1502 • For sending pressure through W-15 fluid to remote gauge (for use in mud systems)

7148001

5945101 Capacity

Part Number

Complete Unit – Protector Gauge 15,000psi 50mmNB Spare Part – Check Valve Spare Part – Diaphragm Spare Part – Nut Retainer

1030

5945101 7131003 7131005 7131004

Description Plastic Metal

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number 7140001 7148001


Swivel Joints & Tong Dies Swivel Joint – S20

Swivel Joint – S50, Male-Female

• Green: 600psi • Blue: 1,000psi • Silver: 6,000psi

• Olive: 10,000psi • Red: 15,000psi

Colour

Description

Size

Working Pressure

Part Number

Green Silver Green Green Silver Green Silver Blue Silver Green Blue Blue Silver Green Blue Blue Blue Blue

1”NPT 1”NPT 11⁄4”NPT 11⁄2”NPT 11⁄2”NPT 2”NPT 2”NPT 2”NPT 21⁄2”NPT 3”NPT 3”NPT 3” Buttweld 3”NPT 4”NPT 4”NPT 4” Buttweld 6” Buttweld 8” Buttweld

25mmNB 25mmNB 32mmNB 40mmNB 40mmNB 50mmNB 50mmNB 50mmNB 65mmNB 80mmNB 80mmNB 80mmNB 80mmNB 100mmNB 100mmNB 100mmNB 150mmNB 200mmNB

600psi 6,000psi 600psi 600psi 6,000psi 600psi 6,000psi 1,000psi 6,000psi 600psi 1,000psi 1,000psi 6,000psi 600psi 1,000psi 1,000psi 1,000psi 1,000psi

6309002 99150001 6309003 6309004 6318004 6317001 6326002 6333002 6303001 6325002 6333004 6342001 6311001 6325004 6341002 6341003 6341004 6341005

Swivel Joint – S30 • Green: 600psi • Blue: 1,000psi • Silver: 6,000psi

Product Code

Size

Description

LS15 1502 LSG 10 1502

50mmNB 50mmNB

2” Male – Female 2” Male – Female Sour Gas

19

Part Number 6329001 6346001

Swivel Joint – S60 • Green: 600psi • Silver: 6,000psi

Colour

Description

Size

Working Pressure

Part Number

Silver Green Green

1”NPT 2”NPT 3”NPT

25mmNB 50mmNB 80mmNB

6,000psi 600psi 600psi

6310008 6336002 99140000

Swivel Joint – S70 • • • •

1” NPT 25mmNPT Silver: 6,000psi Silver

6318002

Colour

Description

Size

Working Pressure

Part Number

Green Silver Green Green Silver Green Blue Silver Green Blue

1” NPT 1” NPT 11⁄4” NPT 11⁄2” NPT 11⁄2” NPT 2” NPT 2” NPT 2” NPT 3” NPT 3” NPT

25mmNB 25mmNB 32mmNB 40mmNB 40mmNB 50mmNB 50mmNB 50mmNB 80mmNB 80mmNB

600psi 6,000psi 600psi 600psi 6,000psi 600psi 1,000psi 6,000psi 600psi 1,000psi

6309001 6310006 99140004 6309005 6326001 6317002 6333003 6326003 6325001 6341001

Contact ATOM for the full range of Varco BJ, Baash Ross, Cavins Inserts & Dies.

Tong Die Inserts • More dies and spares available on request

Swivel Joint – S50 • Silver

Description

Size

Working Pressure

1”NPT 2”NPT 3”NPT

25mmNB 50mmNB 80mmNB

6,000psi 6,000psi 6,000psi

Part Number 6318001 6334001 6319001

Description

Size

Tong Die Diamond Pattern Tong Die Pyramid Pattern Tong Die Pyramid Pattern Tong Die Diamond Pattern Tong Die Diamond Pattern Tong Die Diamond Pattern Tong Die Diamond Pattern

3

1800 999 024 | atom.com.au | getit@atom.com.au

⁄8” x 1” x 41⁄4’’ 1 ⁄2” x 11⁄4” x 5” 1 ⁄2” x 11⁄4” x 57⁄8” 1 ⁄2” x 11⁄4” x 5” 1 ⁄2” x 11⁄4” x 57⁄8” 3 ⁄4” X 11⁄4” X 5” 3 ⁄4” x 21⁄2” x 7”

Part Number 6920003 6933001 6934001 6925001 6926001 162358 241293

1031


19

Hose Assembly, Swivel Joint Packaging & Striking Wrenches Swivel Joint Hose Assembly

Striking Wrenches – 6 Point, Straight

• Cementing loop • 2” x 10ft

• Features greater handle strength and overall head diameter clearance • Ideal for working with flange connections • Large smooth striking surface reduces the risk of glancing blows and slipping • Forged from alloy steel and properly heat-treated for strength and maximum tool life • Stud size and details clearly marked on the handle

10001002

Swivel Joint Packing Sets • Low pressure code: green and blue • High pressure code: silver

Stud Size

Nut Size (AF)

Head Diameter

⁄8” ¾” 7 ⁄8” 1” 11⁄8” 1¼” 13⁄8” 1½” 15⁄8” 13⁄4” 17⁄8” 2” 2¼” 2½”

11⁄16” 1¼” 17⁄16” 15⁄8” 113⁄16” 2” 23⁄16” 23⁄8” 29⁄16” 23⁄4” 215⁄16” 31⁄8” 31⁄2” 37⁄8”

111⁄16” 115⁄16” 211⁄16” 2½” 2¼” 215⁄16” 37⁄16” 37⁄8” 4¼” 311⁄16” 33⁄16” 47⁄8” 43⁄8” 5¼”

5

Description

Size

Part Number

Low Pressure Low Pressure Low Pressure Low Pressure Low Pressure Low Pressure Low Pressure Low Pressure High Pressure High Pressure High Pressure High Pressure High Pressure High Pressure Ad Low Pressure 020 LS15 HH/SST Low Pressure LFS Low Pressure LS High Pressure LS High Pressure X High Pressure High Pressure S SST High Pressure TL Sour Gas HH/SST High Pressure TL HH/SST High Pressure LS10 LS15 LS10 LS15 LS10 LS15 SG LS10 LS15 Tri-race XHLS HFS LSG10 XHTL Tri-race 10 SG LSG

10 – 15mmNB (3⁄8” – 1⁄2”) 20 – 25mmNB (3⁄4” – 1”) 32 – 40mmNB (11⁄4” – 11⁄2”) 50mmNB (2”) 65 – 80mmNB (21⁄2” – 3”) 100mmNB (4”) 150mmNB (6”) 200mmNB (8”) 20 – 25mmNB (3⁄4” – 1”) 32 – 40mmNB (11⁄4” – 11⁄2”) 50mmNB (2”) 65mmNB (21⁄2”) 80mmNB (3”) 100mmNB (4”) 32 – 40mmNB (11⁄4” – 11⁄2”) 50mmNB (2”) 80mmNB (3”) 40mmNB (11⁄2”) 80mmNB (3”) 50mmNB (2”) 50mmNB (2”) 80mmNB (3”) 80mmNB (3”) 80mmNB (3”) 40mmNB (11⁄2”) 50mmNB (2”) 50mmNB (2”) 80mmNB (3”) 50mmNB (2”) 50mmNB (2”) 50mmNB (2”) 80mmNB (3”) 80mmNB (3”)

6301003 6301002 6301001 6301004 6301005 6301006 6301007 6301008 6302001 6302002 6302003 6302004 6302005 6302006 6304003 99170006 6312006 6304001 6312003 6304004 6304008 6312002 6312005 6312007 6304002 6304006 6320017 6312001 6304005 6304007 6321004 6312004 6321007

To find the rest of our spanners and wrenches, start on page 381

1032

Part Number 7232009 7232008 7232007 7232006 7232005 7232004 7232003 7232002 7232001 7231005 7231004 7231003 7231002 7231001

Striking Wrenches – 12 Point, Offset • Gearench titan striking face box wrenches are drop-forged alloy steel with a 45° offset head and a 12 point opening • The TITAN name, part number and opening size are clearly marked on each wrench

Opening/Nut Size (AF)

Length

Part Number

11⁄16” 11⁄8” 1¼” 15⁄16” 17⁄16” 1½” 15⁄8” 111⁄16” 1¾” 113⁄16” 17⁄8” 115⁄16” 2” 21⁄8” 23⁄16” 2¼” 25⁄16” 23⁄8” 2½” 29⁄16” 25⁄8” 2¾” 27⁄8” 215⁄16” 3” 31⁄8”

10½” 10½” 11” 11” 11¾” 11¾” 12” 12” 12½” 12½” 12½” 13¾” 13¾” 13½” 13½” 13½” 14” 14” 14¾” 14¾” 14¾” 16” 16” 16½” 16½” 16½”

7236008 7236007 7236006 7236005 7236004 7236003 7236002 7236001 7235006 7235005 7235004 7235003 7235002 7235001 7234005 7234004 7234003 7234002 7234001 7233007 7233006 7233005 7233004 7233003 7233002 7233001

The little things, but not every thing. No matter what your thing, get it @ ATOM


Casing Tongs, Wheel Wrenches & Non Marking Chain Wrenches Chain Strap Wrenches

Valve Wheel Wrenches

Memac

• Provides leverage on hand operated valve wheels • Design of wrench opening helps reduce chance of slippage

• Combines the strength of a chain wrench with the smoothness of a strap wrench • Turns on hardened steel shafts, thin wall tubing, steel pipe and plastic tubing without gouging or distorting • Ideal for working in tight places • Ideal for use on chrome moly • Grips onto any shape or material • Gentle on soft or thin materials • Rugged design

Description

O.D. Capacity

Size

Strap Wrench #1

3

⁄4” – 31⁄4”

20 – 82mm

7420003

Strap Wrench #2

1

1 ⁄2” – 5 ⁄4”

40 – 133mm

7420001

Strap Wrench #2

1 ⁄2” – 7”

40 – 178mm

7420002

Strap Wrench #3

1

3” – 10 ⁄2”

76 – 267mm

7414002

Strap Wrench #3

3” – 14”

76 – 356mm

7414001

1 1

Part Number

7402002

Pin Chain To Suit Chain Strap Wrench #1

99408005

Spring To Suit Chain Strap WrenchVALVE #1 PETOL

WHEEL WRENCH

7420004

Pin Yoke To Suit Chain Strap Wrench #1

99400006

Chain To Suit Chain Strap Wrench #2 – 40 – 133mm

7420012

Pawl To Suit Chain Strap Wrench #2

7420013

Wrench Loop To Suit Chain Strap Wrench #2

7420006

Pin Chain To Suit Chain Strap Wrench #2

7420008

Pin Yoke To Suit Chain Strap Wrench #2 The PETOL VALVE WHEEL WRENCH was designed for added

45

7420014

also reduces the chance of the wrench slipping.

safety when opening and closing stubborn valves.

7420007

Spring To Suit Chain Strap Wrench #2

Part Number 7409002 7409003 7409001

• Innovative design and utilisation of a technologically advanced belt provide features that are truly amazing • This lightweight belt is actually stronger than chain – and you don’t have to worry about rust or corrosion • While torque will vary according to diameter, it can deliver up to 241,900 ft/lb of torque on 72” O.D. pipe • One of the most important features of the belt is that it will not come apart, even when it’s broken. Although all tongs are safe when used properly, this feature offers added safety in that there are no “flying” parts if the tong is over-torqued • The Petol Surgrip casing tongs are available in three sizes with 45 belts to accommodate pipe sizes from 95⁄8” to 72” O.D • Each tong comes equipped with two Petol diamond point inserts which can be quickly changed out when necessary. The 60021423 and 60021424 tongs can be adjusted to grip the main body of the pipe or the pipe upset as needed • Prior to shipment, every Petol surgrip casing tong is magnetic particle inspected, load tested and magnetic particle inspected again • Belts must be ordered separately

PETOL VALVE WHEEL WRENCH 99408004

Yoke To Suit Chain Strap Wrench #1

8” 10” 10”

Petol

7420005

Wrench Loop To Suit Chain Strap Wrench #1

Length

Aluminium Aluminium Forged Steel

Casing Tongs

Parts Chain To Suit Chain Strap Wrench #1 – 20 – 82mm

Description

19

Finally, the handle has been designed to provide the worker with a safer, more comfortable gripping area.

The wrench has a patented feature which fits over a spoke of the valve wheel to minimize the chance of the wrench slipping off the wheel when force is beingThe applied. PETOL Wrenches are made aluminumPETOL VALVE WHEEL WRENCH was designed for Valve added Wheelalso reduces the chance of from the wrench slipping. safety when opening and closing stubborn valves. magnesium and come in three sizes to fit a wide range of valve Finally, the handle has been designed to provide the worker with a In addition to this, the base pad has been improved by a deeper, wheel diameters. wrench hasthe a patented feature which safer, more comfortable gripping area. more rounded design for The a better fit on valve wheel rim. Thisfits over a spoke of the

7420015

Ring Snap To Suit Chain Strap Wrench #2

7402001

Chain To Suit Chain Strap Wrench #3 – 76 – 267mm

7420011

Pin Chain Tovalve Suit Chain Strap Wrench #3 wheel to minimize the chance of the wrench slipping off the wheel when force is being applied.

NO.

In addition to this, theLENGTH base pad has been improved by OPENING a deeper,

design for a better This Ring Snap Suit rounded Chain Strap Wrench #3 fit on the valve wheel rim. VWP1Tomore 13-5/8" 1-3/8"

VWP2

17-5/8"

7420017

2-1/4 lbs. 3-7/8 lbs. 7-5/8 lbs.

1-3/4" 2-1/2"

VWP3 25-1/2" Pin Yoke To Suit Chain StrapCATALOG Wrench #3 NO.

PETOL Valve Wheel Wrenches are made from aluminummagnesium and come in three sizes to fit a wide range of valve wheel diameters. WEIGHT

7420016

Pawl CATALOG To Suit Chain Strap Wrench #3

7420018

LENGTH 13-5/8" 17-5/8" WARNING! Protect yourself and others25-1/2" from SERIOUS INJURY!

OPENING 1-3/8" 1-3/4" 2-1/2"

Wrench Loop To Suit Chain Strap VWP1Wrench #3 VWP2

VWP3 #3 Spring To Suit Chain Strap Wrench

Use only as a hand tool for gripping – NOT FOR STRIKING! Never use a “cheater” or other means to extend handle! Always pull toward base pad! If wrench slips you can be hurt or injure others. WARNING!

Valve Wheel Wrenches

7420009 7420010

WEIGHT 2-1/4 lbs. 3-7/8 lbs. 7-5/8 lbs.

Protect yourself and others from SERIOUS INJURY! Use only as a hand tool for gripping – NOT FOR STRIKING!

useON a “cheater” or other to extend handle! NOTE: SAFE PRACTICES & PROCEDURES CAN BENever FOUND PAGE 9 OF THIS means CATALOG.

• Designed for added safety when opening and closing stubborn valves • Fits over spoke of the valve wheel to minimise the chance of slipping when force is applied • Deeper, more rounded base pad design for a better fit • Safer, more comfortable gripping handle SAFER, MORE COMFORTABLE GRIP PATENTED SPOKE GRIP • Aluminium magnesium construction

Always pull toward base pad! If wrench slips you can be hurt or injure others.

NOTE: SAFE PRACTICES & PROCEDURES CAN BE FOUND ON PAGE 9 OF THIS CATALOG.

SAFER, MORE COMFORTABLE GRIP

IMPROVED BASE PAD DESIGN Improved Base Pad Design

PATENTED SPOKE GRIP

O.D.

95⁄8” – 20” IMPROVED BASE PAD DESIGN 18” – 38” 36” – 72”

Gripping Width

Handle Length

Part Number

9.50” 12.00” 14.50”

36” 33” 33”

60021423 60021424 60021425

Valve still not moving? Form GCAT20 Rev. 04/05

Length

Opening

135⁄8” 175⁄8” 251⁄2”

13⁄8” 13⁄4” 21⁄2”

Part Number

Find rust and corrosion penetrants on page 853

Form GCAT20 Rev. 04/05

7408001 7408002 7408003

1800 999 024 | atom.com.au | getit@atom.com.au

1033


19

Pipe Tongs , Rig Wrenches & Parts Drill Pipe Tongs & Spare Parts

Drill Pipe Tongs – Spare Parts Guide

Petol

Petol

• Designed for making up and breaking out drill pipe, casing and pneumatic drills on light rigs • These tongs are furnished as original equipment by rig manufacturers because of their ease in handling, quick application and ability to withstand rugged use • Chain assemblies must be ordered separately

• Available on request

Product Code

Description

DA1344 Tong Only DA2344-C12 Tong Only DA4174-L08 Tong Only DA4174-C12 Tong Only DA4174-L21 Tong Only DA6184-C10 Tong Only DA8184-C09 Tong Only Spare Parts Complete Chain Assembly Complete Chain Assembly Complete Chain Assembly Complete Chain Assembly Complete Chain Assembly Spring Guide Spring Bush Spring Pin Spring Insert Key Insert Insert Diamond Point Insert Blank Insert Knurled Pin Master Link Handle Chain - 2 Links Chain - 5 Links Chain - 7 Links Chain - 17 Links Pin Master Link Handle Link Master 4-5 Link Chain Chain Screw 151-4-5 Chain Pin Master Link Handle Nut Chain Screw 151-4-5 Chain Spring Pin With Cotter Bolt & Nut Splice For 151-4-5 Chain

O.D.*

Gripping Width

1” – 6” 4” 21⁄8” – 5” 4.44” 3” – 81⁄4” 5.00” 3” – 81⁄4” 5.00” 3” – 81⁄4” 5.00” 41⁄4” – 103⁄4” 4.88” 4” – 14” 7.25” Compatible Product 25mm – 150mm 115mm – 146mm 248mm – 274mm 248mm – 274mm 292mm – 320mm DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174 DA4174

Handle Length

Part Number

8” 12” 8” 12” 21” 10” 9” Key No. DA1344 DA2344 DA4174 DA6184 DA8184 1 2 8 14 15 16 16 16 19 22 22 22 22 23 18 24 26 27 10,11 20,21

99370015 88898873 99370018 6945003 6942004 6941001 99370012

For a full range of replacement parts contact ATOM on 1800 999 024

1034

99370017 88898872 6945002 6941002 99370029 6944017 6944011 6944010 6944009 6944008 6945005 6945006 6945001 6944019 6942001 6942003 6944025 6944024 6944020 6944013 6944015 6944018 6944014 6944027 6944016

Key No.

Description

No. Required

1 2 3, 4, 5, 6 7 8 9 10, 11 12, 13 14 15 16 17 18 19 20, 21 22 23 24 25 26 27

Spring Guide Spring Hanger Bolt & Nut Assembly Handle Spring Pin Bushing Hanger Spring Pin with Cotter Jaw Bolt & Nut Insert Key Spring Insert Key Black Insert Insert Master Link Master Link Chain Pin Splice Bolt & Nut Special Chain Only Chain Screw Pin Chain Screw Jaw Master Link Handle Pin Chain Screw Nut

1 1 1 1 1 1 1 1 4 4 2 2 1 1 As Required 1 1 1 1 1 1

Rig Wrench • Faster and safer method of making up or breaking out drill pipe on water well and blast hole drilling rigs • Self-adjusting and perfect ratcheting action • Specially designed hand grips for ease of operation • Non-jamming rugged design • Inserts are seated in dovetail slots, to not shear from the wrench during use • Torque arm length will vary from 17.38” – 19.38” depending on O.D. being worked • Use T-7 inserts for 31⁄2” O.D. only O.D.

Gripping Width

Max. Working Load

31⁄2” – 5” Parts

2¼”

16,000ft-lb

Part Number 6943001

Insert Upper Jaw For Rig Wrench

6944001

Insert Lower Jaw For Rig Wrench Spring For Rig Wrench Jaw Upper For Rig Wrench Bush Upper Jaw, Rig Wrench Bush Upper Jaw, Rig Wrench Insert Upper Jaw, Rig Wrench

6944002 6944003 6943002 6943003 6943004 99370020

The little things, but not every thing. No matter what your thing, get it @ ATOM


Chain Tongs, Chain Vices & Dope Brushes Bull Tongs & Spare Parts

Chain Tongs & Spare Parts

Petol

Titan

• The most versatile tools available for making up or breaking out tool and pipe joints in the shop as well as on the drilling rig • Positive grip, perfect ratcheting, non-crushing and non-jamming features make these tongs the ideal choice for many jobs • This tong grips in the downward motion and ratchets in the upward motion • Other sizes available on request • Chain assemblies must be ordered separately • Chain assembly can be shortened by removing links

• Exceptional quality ensures they will give better service in the field • Jaws are drop-forged from high-quality steel and properly hardened and tempered to stand the severe service expected of them • All sizes are equipped with heat-treated Petol special chains • Replacement parts are interchangeable with other standard brands of “single jaw” chain tongs and are packaged and labelled for the customer’s convenience in getting correct and genuine Petol and Titan parts

O.D. Range

Gripping Width

5” – 17” 7.55” 16” – 40” 7.63” Parts Complete Chain Assembly For 7432001 (358-378mm) Complete Chain Assembly for 7432001 (350-768mm) Insert Knurled Bull Tong Bolt & Nut Splice For 161-3-4 Chain

Handle Length

Part Number 7432001 7433001

36” 36”

7432002 7434001 6944004 6944005

Bukup Tongs Petol • Designed for use with a pipe machine for “bucking up” and “bucking off” tool joints • Larger sizes may be used for breaking out drill collars, reamers or similar heavy jobs • Wide range of each size of Petol bukup tong reduces to a minimum the tools needed for handling the many sizes of tool joints • Special chain combinations used with this tong come complete with heavy-duty bolts, making it quick to change O.D. sizes • Grips in upward motion and ratchets in the downward motion • Chain assemblies must be ordered separately

O.D.

Gripping Width

Handle Length

Part Number

21⁄8” – 8” 4” – 10” 41⁄4” – 103⁄4” Parts Blank Insert

4.66” 6.00” 6.06”

48” 48” 48”

99370044 88898252 99370000 6945004

Tong Vice • Designed for heavy-duty breakout or makeup operations • Replaces several vices used in pipe yards, machine shops, down-hole tool shops and offshore drilling platforms • Easily adjustable by simply sliding the heattreated Petol special chain through the jaw of the vice and engaging the locking cam lever • Will not jam even under heavy loads • Self-tightening feature increases the grip as the torque increases • Chain assemblies must be ordered separately

O.D.

Gripping Width

2 – 8” 5¼” 4 – 14” 7“ Chain Assemblies Complete Chain Assembly 103mm-254mm For 88898344 Chain Assembly 3-4 Combination For 99370034

Product Code

Pipe Size

Gripping Width Tong Length Chain Tensile Strength

Part Number

C11-P C12-P C12-P C13-P C135-P C14-P C15-P

⁄8” – 11⁄2” 1 ⁄4” – 21⁄2” 1 ⁄2” – 171⁄2” 3 ⁄4” – 4” 1” – 6” 11⁄2” – 8” 2” – 12”

1.75” 2.25” 2.25” 2.63” 2.88” 3.06” 3.25”

7431001 7407005 99400022 7407004 7407003 7407002 7407001

1

Description Bolts & Nuts For Titan Jaw Chain Tong For 7407005 For 7407004 For 7407003 For 7407002 For 7407001 Jaw Pair For Titan Chain Tong For 7431001 For 7407005 For 7407004 For 7407003 For 7407002 For 7407001 Chain & Master Link For 7431001 For 7431001 For 7407005 For 7407005 For 7407005 For 7407004 For 7407004 For 7407003 For 7407002 For 7407002 For 7407002 For 7407001

20” 27” 27” 37” 45” 51” 65” Size

9,400lb 12,800lb 13,800lb 17,600lb 20,100lb 22,000lb 31,000lb

19

Part Number

– – – – –

7428004 7428005 7428006 7428007 7428008

10-40mm 10-65mm 20-100mm 25-150mm 40-200mm 50-300mm

7427001 7427003 7427007 7427009 7427011 7428002

10-300mm 10-380mm 10-65mm 10-190mm 10-350mm 20-100mm 20-280mm 25-150mm 40-200mm 50-380mm 50-500mm 50-300mm

7428011 7428010 7427004 7427006 7427005 7427008 94000001 7427010 7428001 99370039 99370043 7428003

Dope Brush – Wood Handle • For applying pipe dope and other heavy greases • Wooden handle with plastic guard • Length: 406mm (16”)

Max. Working Load

Part Number

14,000ft-lb 38,500ft-lb

88898344 99370034 88898343 99370035

Description

Size

Part Number

63.5mm (21⁄2”) Dia. Head 50.8mm (2”) Dia. Head

No.2 No.4

30000321 30000322

1800 999 024 | atom.com.au | getit@atom.com.au

1035


19

Hands Free Tools, Rod Pumping Spares Hands Free Tools – Stiffy Hand

Rod Pump ASSEMBLY

• Fibreglass push pole and handle • Significant success in eliminating hand and fingers injuries when transferring loads • This tool uses opposing grab hooks to grasp taglines and slings • Reach extender

Rod Clamp

ATOM stocks your rod pump set assembly items.

60025893

See components and parts below.

Stuffing Box Pumping Tee Rod BOP

60025894

Rod Clamps

60025895 Size

Part Number

42” 50” 72”

60025893 60025894 60025895

• Polished • Figure 1

Hands Free Tools – Stiffy Snare, Dual Release • • • • • • • • •

1,200mm (48”) Large noose, thick vinyl coated cable Instant release pin Rubber protected pole head Slide control for instant release of noose Non-slip rubber grips for greater control Pole made from light and durable tempered blue anodized aluminium Cable runs through pole forming noose at other end Pull back release knob instantly forms noose

Description

Part Number 137152 7136002

11⁄8” 11⁄4”

Stuffing Box & Cones

117550 Description

Hands Free Tools & Starter Kit

Fig. 700 11⁄8” & Teflon Packing 27⁄8” EUE Fig. 700 11⁄2” & Teflon Packing 27⁄8” EUE

• Manufactured from robust Medium Density Polyethylene (MDPE) • Fitted with secure mounting clips to hold tools in place • Overall compact size to keep to a minimum mounting surface area • Supplied with 12mm mounting bolts • Modified side attachments to accommodate custom made longer models • Canopy to protect from weathering • Recessed mounting area on back wall to install laminated area audit check sheet to control unit’s content

Part Number 7145006 7136003

Description Teflon Cone 11⁄8” Pack of 4 Teflon Cone 11⁄2” Pack of 4

Pumping – Tee • • • •

127258

27⁄8” top and bottom entries 2” side entry 1,000 – 3,000psi Yellow

7144001

Blowout Preventer Description

Part Number

Storage Starter Kit 5 Drill Hand Free Tools & Storage Station Handling Tool Drill Pipe 1,200mm Enclosed Handle Lift Assist Single Handle Manual Handling Aid OHS-S100 Lift Assist Double Handle Manual Handling Aid OHS-D100 Lift Assist Choke Valve Sling 2’’ Choke Valve Strop OHS-C100 Tool 10’’ Pipe Handling Tool Pro 1500mm PPHT18018 Wiper Pipe Pro 1500mm PWPRO1500 Tool General Cargo Handling Enclosed Handle 1500mm GCHT18002

1036

127258 127257 247259 247260 247261 253479 259878 271925

• Model 102 • 11⁄8” rod capacity • Skinner 27⁄8” top & bottom entries

7135001

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number 7128001 7136004


Recorders, Sleeve Couplings, Lifting Bails & Drill Pipe Protectors Rubber Ram

Lifting Bails

• For Model-102 • BOP Skinner

• Cast steel construction • Designed to help lift oilfield and mining type API threads, including tool joints, stabilisers, subs and drill bits, pipes and collars • Helps to safely connect cables to drilling tools • Lifting capacity of 3 times single collar weight • Sizes and types available for most API tool joints

Description

19

Part Number 7135002 7135003 7135004

11⁄8” 11⁄4” 11⁄2”

Pressure Chart Recorder & Spare Charts

Box Fit

Pin Fit

Box

Pin

Box

Pin

Size

Part Number

Part Number

Size

Part Number

Part Number

31⁄2” Reg 31⁄2’’ IF 4’’ IF 41⁄2” Reg 41⁄2” IF

99380010 88898413 99380013 99380008 88899238

99380009 88898414 169674 99380007 88898412

51⁄2’’ FH 65⁄8” Reg 75⁄8” Reg XT57 –

99380014 88898410 88898408 169675 –

99380015 88898411 88898409 169424 –

Thread Protectors Description

Part Number

Recorder Chart 1 Pen 2 HR/8HR 0-10,000psi 12” Diameter 1⁄4” NPT Mechanical Chart Pressure 0-5,000 – 10,000psi 24HR 111⁄4” 100 Per Box Chart Pressure 0-7,500psi 96min 111⁄4” 100 Per Box Chart Pressure 0-10,000psi 2/8hr 111⁄4” 100 Per Box

• Thread protectors offer excellent protection for your drill pipe threads • Available in API threads from 23⁄8” – 85⁄8”

238016 200133 231707 243218

Pipe Sleeve Couplings & Parts • Sleeve couplings provide positive seal, correct misalignment and absorb vibration • Nitrile gaskets and track head bolts with rolled threads are standard

Pin Fit

Description

Box Fit

Size

Part Number

Pressed Steel

Description

Size

Part Number

Fig. 038R 200 x 150mm Fig. 040R 4” x 12” Fig. 038R 5” x 7” Fig. 040R 6” x 16” Fig. 040R 8” x 16” Fig. 040R 10” x 16” Fig. 040R 12” x 16” Parts Nut Figure 040R Bolt UNC Figure 040R Bolt UNC Figure 040R Bolt UNC Figure 040R Bolt UNC Figure 040R Bolt UNC Figure 040R Bolt UNC Figure 040R Gasket Figure 040R Gasket Figure 040R Gasket Figure 040R Gasket Figure 040R Gasket Figure 040R Gasket Figure 040R Gasket Figure 040R

200mmNB 100mmNB 125mmNB 150mmNB 200mmNB 250mmNB 250mmNB Size 5 ⁄8” 5 ⁄8” x 380mm 5 ⁄8” x 475mm 3 ⁄4” x 200mm 3 ⁄4” x 250mm 3 ⁄4” x 380mm 3 ⁄4” x 730mm 4” Skinner Sleeve 10” Skinner Sleeve 12” Skinner Sleeve 16” Skinner Sleeve 125mmNB 150mmNB 200mmNB

6626002 99750012 6625001 6631001 6626001 6627002 5807001 Part Number 6619001 6620005 6620006 6620002 6620003 6620004 6620007 99750003 6619005 6607001 6620001 6619006 6619003 6619004

Box Pressed Steel NC-38

31⁄2” IF

7609002

Box Pressed Steel NC-46

4” IF

7603001

Box Pressed Steel

41⁄2” FH

7621002

Box Pressed Steel NC-50

41⁄2” IF

7627001

Box Pressed Steel

65⁄8” REG

7604002

Box Pressed Steel

75⁄8” REG

7610002

Pin Pressed Steel NC-38

31⁄2” IF

7609001

Pin Pressed Steel NC-46

4” IF

7603002

Pin Pressed Steel

41⁄2” FH

7621001

Pin Pressed Steel NC-50

41⁄2” IF

7627002

Pin Pressed Steel

65⁄8” REG

7615001

Pin Pressed Steel

75⁄8” REG

7610001

Box Plastic

23⁄8” REG

7620002

Box Plastic

23⁄8” EUE

7604004

Box Plastic

27⁄8” EUE

7620004

Box Plastic NC-38

31⁄2” IF

99380003

Box Plastic

41⁄2” REG

7620005

Box Plastic NC-50

41⁄2” IF

7604006

Box Plastic

65⁄8” REG

7605005

Box Plastic

75⁄8” REG

7606003

Pin Plastic

23⁄8” REG

7620001

Pin Plastic

23⁄8” EUE

7604003

Pin Plastic

27⁄8” EUE

7620003

Pin Plastic

41⁄2” REG

7620006

Pin Plastic NC-50

41⁄2” IF

7604005

Pin Plastic

65⁄8” REG

7605004

Pin Plastic

75⁄8” REG

7606002

Pin Plastic NC-38

31⁄2” IF

99380004

Plastic

1800 999 024 | atom.com.au | getit@atom.com.au

1037


19

Float Valves, Repair Parts, Hand Pump, Baffle Plates & Joint Identifier Float Valves – Model F, G & GA

Float Valves – Repair Kits

• Plunger and flapper type valves complete • Metal and rubber repair kits • Colours may vary Model F: • Plunger type Model G: • Flapper – full flow Model GA: • Flapper – full flow with carbide orifice – identical to the “G” except for a carbide orifice in the flapper • Allows differential pressure readings at surface

• Repair kit for Baker models • Available in metal or rubber Model G – Metal

Model F – Metal

Size

Part Number

Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model F Plunger Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model G Flapper Type Model GA Flapper Type Model GA Flapper Type Model GA Flapper Type Model GA Flapper Type Model GA Flapper Type

1R 1F – 2R 2F – 3R 31⁄2”IF 3F 4F 4R 5R 5F – 6R 5F – 6R Viton HSN/HNBr 1F – 2R 2F – 3R 31⁄2”IF 31⁄2”IF Viton Seals 3F 4R 5R 5R H2S High Temperature Viton Seals 5F – 6R 2F – 3R 3F 4R 5R 5F – 6R

7412007 7412004 7415001 99320019 99320000 99320015 7415004 7415009 7415010 99320042 7412012 7416004 99320029 88821034 7417003 7417006 99320014 88821031 7418005 7417001 7412010 7415011 7412001 7418006

Call ATOM for other configurations of float valve & spare parts.

• The Baker SPD portable hydraulic hand pump is used for all types of low and high-pressure testing • Other applications include shop, laboratory and oilfield uses such as removing cores from core barrels, plungers from insert liner pumps, and testing valves, fittings, tubing and casing • It is also used for setting cement retainers where mud and cement pumps are not available • Also used as an actuator for hydraulically controlled valves and hydraulically operated systems • Maximum pressure: 5,000psi

8340002

1038

Model G

Description

Baker

Model F – Rubber

Metal Model F

Hand Pump – 500-5,000psi

Model G – Rubber

Rubber

Model

Size

Part Number

Model

Size

Part Number

Model F Model F Model G Model F Model G Model GA Model GA Model F Model G Model F Model G Model GA Model F Model G Model G - H2S Model GA Model F Model G Model GA

1R 1F – 2R 1F – 2R 2F – 3R 2F – 3R 2F – 3R 3F 3F – 31⁄2”IF 31⁄2”IF 4R 4R 4R 5R 5R 5R 5R 5F – 6R 5F – 6R 5F – 6R

7412009 7412006 88894958 7415002 7416006 7417002 7412011 99320002 88821036 7415005 7417007 7418012 7415008 7412013 88821033 7412003 7416001 7418014 7418013

Model F Model F Model G Model F Model G Model F Model G Model G – HSN Model F Model G Model F Model G Model G – HSN Model F Model G – – – –

1R 1F – 2R 1F – 2R 2F – 3R 2F – 3R 3F 3F 31⁄2”IF 4R 4R 5R 5R 5R 5F – 6R 5F – 6R – – – –

7412008 7412005 88894957 7415003 7416005 99320001 7417005 88821035 7415006 7417008 7415007 7412002 88821032 7416002 7418004 – – – –

Baffle Plates & Spiders • Baffle Plates can be placed on top of the drill pipe float valves or the drill bit to help prevent damage from recorders or other wire line tools that are dropped down the string

Description

Connection Size

Baffle Plate Spider Plate Spider Plate Baffle Plate Spider Plate Baffle Plate Baffle Plate Spider Plate Baffle Plate Baffle Plate

3-1⁄2” API 3-1⁄2” API 3-1⁄2” API 4-1⁄2” API 4-1⁄2” API 4-1⁄2” API 6-5⁄8” API 6-5⁄8” API 7-5⁄8” API 8-5⁄8” API

Part Number Regular IF Full Hole Regular FH IF Regular Regular Regular Regular

Stainless Steel Tool Joint Identifier • Multi-purpose tool • Identifies drill stem connections, determines TPI and measures pin base diameter • Etched markings on both sides • 150mm (6”)

7220010

The little things, but not every thing. No matter what your thing, get it @ ATOM

7122006 7207001 7207004 7122003 7122004 99700001 7122002 7122005 7122001 166535


110V Electric Tools & General Oilfield Products Drill – Electric, VSR, 110V

Deck Scraper – Double-End, Offset

DW235G

• • • •

• Helical-cut steel, heat-treated steel gears for long life and durability • Metal gear housing • Two-finger trigger • 360-degree side handle • Amps: 8.5 • Chuck type: Keyed • Check size: 1⁄2”

High carbon steel Length: 266mm (101⁄2”) Blade width: 13⁄4” Weight: 0.45kg (1.0lb)

7213001

92230585

Angle Grinder – Electric, 110V, 125mm

Fender Brushes

• • • • • •

• Filling material is staple set in a wax tumbled 8” x 3” hardwood block • Hang up hole in handle

High power-to-weight ratio Adjustable guards for user safety Wheel diameter: 125mm No load speed: 10,000 Spindle thread: 5⁄8” – 11 UNC Weight: 3.4kg

88821073

Description

Handle

Part Number

20P Brush 8P Brush

Long Handle – 500mm Short Handle – 200mm

30000323 30000320

Die Grinder – Electric, 110V, 40mm

Snake Wire Grips

• • • • • • •

• Designed to pull new wire along with the existing wire • Can grip different or identical wire sizes

High power and speed for all grinding applications Paddle switch with lock-on switch 110V, 60Hz 3amp Max. wheel diameter: 40mm Spindle thread: 1⁄4” collet No load speed: 25,000rpm • Weight: 1.5kg

99900042

Size

Part Number

8 – 15mm 13 – 25mm 25 – 38mm 40 – 50mm

99840006 7815001 7815002 99840005

Jigsaw – Electric, 110V

Pipe Chock

DW331

• For keeping pipes and rods in place during transport and storage • Can be fastened to most surfaces with nails or screws • Also suitable for use as wheel chocks • Non-slip base and UV stabilised • 117(l) x 88(w) x 54(h)mm

• • • • • • • • •

6.5amp motor Variable speed delivers 500 – 3,100 strokes/min Keyless, lever-action blade clamp All-metal gear case and keyless blade lever 4-position orbital action Extra-large rubber grip Integrated dust blower Non-marring plastic shoe Accepts T-shank blades 92230369

95280137

Electric Drop Saw – Electric, 110V

Bung Drum Wrench – Non-Sparking

D28715

• • • •

• • • • • • •

Powerful 15 amp/5.5 HP (maximum motor HP) 45° adjustable fence Extra wide solid steel base, can bolt down Heavy-duty lock-down pin Heavy-duty compression spring Spindle lock Cutting capacity: 5” round / 41⁄2” x 61⁄2” rectangle • Adjustable spark guard 92230176

19

Opens drum bung caps Bronze alloy, non-sparking corrosive resistant tool Offset handle to reduce user stress and injury Fits 2” and 3⁄4” bungs

7213003

1800 999 024 | atom.com.au | getit@atom.com.au

1039


19

Pipe Wipers, Pipe Repair Clamps & Couplings Open Sided Pipe Vice

Victaulic Couplings

• Rugged screw-type vice that holds tubing, drill pipe, manifold fittings, valves and more • Versatile vice for in the field, workshop or rig • Capacity: 60.3mm (23⁄8”) – 219mm (85⁄8”)

• • • • • •

Victaulic style 77 Hot dip gal finish to AS4680 UL No. EX4390, FM EPDM gasket (black) Max. working temp.: 30°C to 110°C Call for Victaulic Buttweld pipe adaptors

Size

Part Number 7216003 7216005 7216006 7217002 7218001

50mmNB (2”) 80mmNB (3”) 100mmNB (4”) 150mmNB (6”) 200mmNB (8”)

8340001

Drill Pipe Tally Book • 200 pages • Sewn binding • 210(l) x 90(w)mm

ATOM supplies the full range of genuine victaulic couplings. Dry Break Couplings Todo-Matic • Todo-Matic couplings are operator friendly and can be engaged with a simple rotation without external locks, levers, buttons or cam ears • Coupling design allows for on-site replacement of seals • They are equipped with an integral swivel to prevent hose fatigue and facilitate coupling orientation • Products are available in aluminium, brass, stainless steel and hastelloy, in diameters from 3⁄4” to 6”

90910244

Pipe Wipers – Elevator & Tong Straps • Long wearing and abrasion-resistant • Concentric grooves act as a guide for cutting the wiper • Prevents foreign objects from entering the well bore by covering the annulus between the tubing and the casing Description

Size

Part Number

Single Pipe Wiper Single Pipe Wiper Single Pipe Wiper Single Pipe Wiper Dual Split Wrap Around Pipe Wiper Dual Split Wrap Around Pipe Wiper Strap Elevator Balancing Strap Tong Pull Back

9” x 23⁄8” 19” x 23⁄8” 26” x 65⁄8” 22” x 23⁄8” 19” x 23⁄8” 22” x 23⁄8”

99610002 7909002 194392 99610004 7925001 7925002 7920001 7928001

Skinner Pipe Repair Clamps • • • • • • •

1040

Stainless steel outer, rubber seal inner High nickel-chromium band Special headed carriage bolt and nut Oil and flame resistant fabric Reinforced neoprene gasket Malleable iron lug Other sizes available on request

Diameter

Length

Part Number

50mm 50mm 80mm 80mm 100mm 125mm 150mm 150mm 200mm 200mm 250mm 300mm

80mm 150mm 150mm 300mm 150mm 300mm 150mm 300mm 150mm 300mm 300mm 300mm

6613001 99750000 6613002 6613003 6613004 6613005 6613006 6614001 99750014 6614003 6614002 99750001

2”

3”

4”

Description

Material

Size

Part Number

Brass Brass Stainless Steel Stainless Steel Stainless Steel

2”NPT/70mm 2”NPT/70mm 2”NPT/70mm 2”NPT/70mm 2”NPT/50mm

94200026 94200025 94200037 94200038 94200041

Aluminium Bronze Aluminium Aluminium Bronze Bronze Bronze

3”NPT/119mm 3”NPT/119mm 3”BSP/105mm 3”NPT/119mm 3”NPT/119mm 3”/119mm 3”/119mm

94200027 94200005 94200092 94200006 94200009 7024003 7024004

Aluminium Stainless Steel Aluminium Stainless Steel Stainless Steel Stainless Steel Stainless Steel

4”NPT/164mm 4”NPT/164mm 4”NPT/164mm 4”NPT/164mm 4”NPT/164mm 4”BSP/164mm 4”/164mm

7024005 94200032 7024006 94200015 94200054 94200017 94200018

2” Hose Unit Tank Unit Tank Unit 316ltr FKM Selectivity TY Tank Unit 316ltr FKM Selectivity TU Cap Dust Dry Break Coupling 3” Hose Unit Marine/Viton Hose Unit – Viton Hose Unit Marine/Viton Tank Unit – Viton Tank Unit – Viton Plug Dust Dry Break Hose Cap Dust Dry Break Tank 4” Hose Unit Marine/Viton Hose Unit 316ltr FKM Tank Unit Marine/Viton Tank Unit 316ltr – Viton Tank Unit 316ltr – Viton Cap Dust Dry Break Tank Unit Plug Dust Dry Break For Hose Unit

Call ATOM for more configurations of dry break couplings.

The little things, but not every thing. No matter what your thing, get it @ ATOM


API Flanges & Adaptors & Flange Spreader API Flanges – Blind

API Flanges – Female Adaptor

• Ring groove

• 2” 1502 female thread union • Ring groove

Description

Working Pressure

Size

Part Number

R-24 BX-152 BX-155 R-27 R-31 R-35 BX-154 R-37 R-39 R-44 BX-154 BX-155 BX-169 R-41

5,000psi 10,000psi 10,000psi 5,000psi 3,000psi 5,000psi 10,000psi 3,000psi 5,000psi 5,000psi 15,000psi 15,000psi 10,000psi 3,000psi

21⁄16’’ 21⁄16’’ 41⁄16’’ 29⁄16” 31⁄8” 31⁄8” 31⁄16” 41⁄16” 41⁄16” 51⁄8” 31⁄16” 41⁄16” 51⁄8” 51⁄8”

9210002 9220002 9253002 9221001 9231001 9232002 9242001 9243001 9243003 94630005 141171 135381 189087 207776

Union Size

Working Pressure

API Flange Size

Part Number

2”-1502 2”-1502 2”-1502 2”-1502 3”-602 2”-1502 2”-1502 2”-1502 2”-1502 2”-1502

5,000psi 5,000psi 10,000psi 5,000psi 5,000psi 10,000psi 10,000psi 15,000psi 3,000psi 3,000psi

31⁄8” 21⁄16” 21⁄16” 41⁄16” 31⁄8” 21⁄16” 29⁄16” 21⁄16” 51⁄8” 41⁄16”

35308015 90012978 94638014 184506 207012 209296 224857 224858 247246 247248

19

API Flanges – Companion • Ring groove • Threaded 2” NPT (line pipe)

Find more flange tools and accessories from page 995

API Flanges – Weld-Neck XXS • Ring groove

Description

Working Pressure

Size

Part Number

RTJ R37 RTJ R23 RTJ R24 RTJ R39 RTJ R35

3,000psi 2,000psi 3,000psi 5,000psi 5,000psi

41⁄16” 21⁄16” 21⁄16” 61⁄16” 31⁄8”

9050001 9209001 9210001 9255001 94630004

Flange Spreader

Description

Working Pressure

Size

Part Number

R24 R27 R35 R39 BX152 R31 BX154 R37 BX155 R44 R41 R54 BX151 BX154 BX155 BX169

5,000psi 5,000psi 5,000psi 5,000psi 10,000psi 3,000psi 10,000psi 3,000psi 10,000psi 5,000psi 3,000psi 5,000psi 10,000psi 15,000psi 15,000psi 10,000psi

21⁄16” 29⁄16” 31⁄8” 41⁄16” 21⁄16” 31⁄8” 31⁄16” 41⁄16” 41⁄16” 51⁄8” 51⁄8” 11” 113⁄16” 31⁄16” 41⁄16” 51⁄8”

9209002 9220003 9231002 9243002 9210003 9221002 9232003 9242002 9253001 9264001 94630001 94630003 94638008 154859 164370 181668

• • • • • •

Four models to cover flange range 25 – 600mm Can be used with flanges that weigh 68 – 681kg Hardened wedge for safe splitting Large feed screw Drive can be rotated by 13⁄8”wrench or 1⁄2” bar Compact design – strong enough for tough jobs

Spread

Pin Diameter

Part Number

76mm 101mm 127mm 162mm 70 – 215mm Hydraulic

16mm 19mm 22mm 25mm –

60014072 60014071 60014070 60014069 60014073

1800 999 024 | atom.com.au | getit@atom.com.au

1041


19

API – ANSI Ring Joint Gaskets Ring Joint Gaskets Guide • • • •

Solid metal gaskets that are softer than the mating flange material Creates a seal by filling imperfections and leak paths with gasket material Under high sealing stress the gasket deforms but not the flange Ideal for the petrochemical industry (offshore oil platforms and refineries) due to the high service pressures required • Machined to exact specifications and tight tolerances Hardness of Materials: • On compression of the flange assembly, it is imperative that the ring joint gasket be significantly softer than the flange groove so that the gasket plastically deforms and not the groove. The use of harder ring joint gaskets can result in flange groove damage Ring Joint Gasket Styles: • R – Oval or octagonal • RX – Self-energising gasket • BX – Used in API spec 6A flanges • AX – Pressure energized

Oval

Octagonal

Material

HB Max.

HRB Max.

Soft Iron (D)

90

56

Low Carbon Steel (S)

120

68

Cr1/2Mo (F5)

130

72

316 Stainless Steel (SS)

160

83

Ring Joint Gaskets – R Style R Ring Gasket Oval – Soft Iron (D) Ring No.

Size

Rating

Size

Rating

R11D

15mmNB (1⁄2”)

ANSI-3/600

Part Number 6716002

R45D

150mmNB (6”)

ANSI-3/6/900, API 2/3000

Part Number 6730003

R12D

15mmNB (1⁄2”)

ANSI-9/1500

6725001

R46D

150mmNB (6”)

ANSI-1500, API 5000

6731002

R13D

15 – 20mmNB (1⁄2” – 3⁄4”)

ANSI-3/600, 2500

6725003

R47D

150mmNB (6”)

ANSI-2500

6731004

R14D

20mmNB (3⁄4”)

ANSI-9/1500

6725005

R48D

200mmNB (8”)

ANSI-150

6724002

R16D

20 – 25mmNB (3⁄4” – 1”)

ANSI-3/6/9/1500, 2500

6725007

R49D

200mmNB (8”)

ANSI-3/6/900, API 2/3000

6732001

R18D

25 – 32mmNB (1” – 1¼”)

ANSI-3/6/9/1500, 2500

6725009

R50D

200mmNB (8”)

ANSI-1500, API 5000

6732003

R20D

40mmNB (11⁄2”)

ANSI-3/6/9/1500, API 2/3/5000

6725011

R51D

200mmNB (8”)

ANSI-2500

6819001

R22D

50mmNB (2”)

ANSI-150

6725013

R53D

250mmNB (10”)

ANSI-3/6/900, API 2/3000

6819002

R23D

40 – 50mmNB (11⁄2” – 2”)

ANSI-3/600, API 2K 2500

6726001

R54D

250mmNB (10”)

ANSI-1500, API 5000

6820001

R24D

50mmNB (2”)

ANSI-9/1500, API 3/5000

6726003

R57D

300mmNB (12”)

ANSI-3/6/900, API 2/3000

6821001

R26D

50 – 65mmNB (2” – 21⁄2”)

ANSI-3/600, API 2K 2500

6726005

R58D

300mmNB (12”)

ANSI-1500

6822001

R27D

65mmNB (21⁄2”)

ANSI-9/1500, API 3/5000

6726007

R60D

300mmNB (12”)

ANSI-2500

6822002

R30D

80mmNB (3”)

ANSI-3/600

6727002

R66D

400mmNB (16”)

ANSI-900, API 3000

98720006

R31D

80mmNB (3”)

ANSI-3/6/900, API 2/3000

6727004

R67D

400mmNB (16”)

ANSI-1500

6836002

R32D

80mmNB (3”)

ANSI-2500

6727006

R71D

450mmNB (18”)

ANSI-1500

98720000

R35D

80mmNB (3”)

ANSI-1500, API 5000

6728002

R72D

500mmNB (20”)

ANSI-150

6834001

R37D

100mmNB (4”)

ANSI-3/6/900, API 2/3000

6728004

R73D

500mmNB (20”)

ANSI-3/600, API 2000

6833001

R38D

100mmNB (4”)

ANSI-2500

6729001

R77D

600mmNB (24”)

ANSI-3/600

6831001

R39D

100mmNB (4”)

ANSI-1500, API 5000

6729003

R78D

600mmNB (24”)

ANSI-900

98720007

R41D

125mmNB (5”)

ANSI-3/6/900, API 2/3000

6729005

R101D

700mmNB (28”)

ANSI-900

98720008 Part Number

R Ring Gasket Octagonal – Soft Iron (D)

1042

Ring No.

Size

Rating

Ring No.

Size

Rating

R11D

15mmNB (1⁄2”)

ANSI-3/600

6716003

R46D

150mmNB (6”)

ANSI-1500, API 5000

6731003

R12D

15mmNB (1⁄2”)

ANSI-9/1500

6725002

R48D

200mmNB (8”)

ANSI-150

6724003

R13D

15 – 20mmNB (1⁄2” – 3⁄4”)

ANSI-3/600

6725004

R49D

200mmNB (8”)

ANSI-3/6/900, API 2/3000

6732002

R14D

20mmNB (3⁄4”)

ANSI-9/1500

6725006

R50D

200mmNB (8”)

ANSI-1500, API 5000

6732004

R16D

20 – 25mmNB (3⁄4” – 1”)

ANSI-3/6/9/1500, 2500

6725008

R53D

250mmNB (10”)

ANSI-3/6/900, API 2/3000

6819003

R18D

25 – 32mmNB (1” – 1¼”)

ANSI-3/6/9/1500, 2500

6725010

R54D

250mmNB (10”)

ANSI-1500, API 5000

6820002

R20D

40mmNB (11⁄2”)

ANSI-3/6/9/1500, API 2/3/5000

6725012

R57D

300mmNB (12”)

ANSI-3/6/900, API 2/3000

6821002

R22D

50mmNB (2”)

ANSI-150

6725014

R61D

350mmNB (14”)

ANSI-3/600

6822003

R23D

40 – 50mmNB (11⁄2” – 2”)

ANSI-3/600, API 2K, 2500

6726002

R62D

350mmNB (14”)

ANSI-900

6823001

R24D

50mmNB (2”)

ANSI-9/1500, API 3/5000

6726004

R63D

350mmNB (14”)

ANSI-1500

6823002

R26D

50 – 65mmNB (2” – 21⁄2”)

ANSI-3/600, API 2K, 2500

6726006

R65D

400mmNB (16”)

ANSI-3/600, API 2000

6824001

R27D

65mmNB (21⁄2”)

ANSI-9/1500, API 3/5000

6727001

R66D

400mmNB (16”)

ANSI-900, API 3000

6824002

R30D

80mmNB (3”)

ANSI-3/6/900, API 2/3000

6727003

R67D

400mmNB (16”)

ANSI-1500

6716004

R31D

80mmNB (3”)

ANSI-3/6/900, API 2/3000

6727005

R69D

450mmNB (18”)

ANSI-3/600, API 2000

6836001

R32D

80mmNB (3”)

ANSI-2500

6728001

R70D

450mmNB (18”)

ANSI-900, API 3000

6835001

R35D

80mmNB (3”)

ANSI-1500, API 5000

6728003

R71D

450mmNB (18”)

ANSI-1500

98720012

R37D

100mmNB (4”)

ANSI-3/6/900, API 2/3000

6728005

R73D

500mmNB (20”)

ANSI-3/600, API 2000

6833002

R38D

100mmNB (4”)

ANSI-2500

6729002

R74D

500mmNB (20”)

ANSI-900, API 3000

6832001

R39D

100mmNB (4”)

ANSI-1500, API 5000

6729004

R77D

600mmNB (24”)

ANSI-3/600

6831002

R41D

125mmNB (5”)

ANSI-3/6/900, API 2/3000

6729006

R95D

750mmNB (30”)

ANSI-3/600

10437001

R44D

125mmNB (5”)

ANSI-1500, API 5000

6730002

R102D

750mmNB (30”)

ANSI-900

10438001

R45D

150mmNB (6”)

ANSI-3/6/900, API 2/3000

6730004

R105D

900mmNB (36”)

ANSI-900

10436001

R45/46D

150mmNB (6”)

ANSI-3/6/900-1500 + API

6731001

Part Number

The little things, but not every thing. No matter what your thing, get it @ ATOM


API – ANSI Ring Joint Gaskets

19

Ring Joint Gaskets – R Style, Continued

Material

HB Max.

HRB Max.

Soft Iron (D)

90

56

Low Carbon Steel (S)

120

68

Cr1/2Mo (F5)

130

72

316 Stainless Steel (SS)

160

83 Oval

Octagonal

R Ring Gasket Oval – Cr1/2Mo (F5) Ring No.

Size

Rating

Ring No.

Size

Rating

R11F5

15mmNB (1⁄2”)

ANSI-3/600

Part Number 6741005

R45F5

150mmNB (6”)

ANSI-3/6/9000, API 2/3000

Part Number 6745004

R12F5

15mmNB (1⁄2”)

ANSI-9/1500

6741006

R49F5

200mmNB (8”)

ANSI-3/6/900, API 2/3000

6742003

R13F5

15 – 20mmNB (1⁄2” – 3⁄4”)

ANSI-3/600, 2500

6741007

R50F5

200mmNB (8”)

ANSI-1500, API 5000

6742004

R14F5

20mmNB (3⁄4”)

ANSI-9/1500

6741008

R53F5

250mmNB (10”)

ANSI-3/6/900, API 2/3000

6743001

R16F5

20 – 25mmNB (3⁄4” – 1”)

ANSI-3/6/9/1500, 2500

6741001

R54F5

250mmNB (10”)

ANSI-1500, API 5000

6743002

R20F5

40mmNB (11⁄2”)

ANSI-3/6/9/1500, API 2/3/5

6741009

R57F5

300mmNB (12”)

ANSI-3/6/900, API 2/3000

6743003

R23F5

40 – 50mmNB (11⁄2” – 2”)

ANSI-3/600, API 2K, 2500

6741010

R58F5

300mmNB (12”)

ANSI-1500

6744001

R24F5

50mmNB (2”)

ANSI-9/1500, API 3/5000

6741002

R65F5

400mmNB (16”)

ANSI-3/600, API 2000

6744002

R31F5

80mmNB (3”)

ANSI-3/6/900, API 2/3000

6741004

R66F5

400mmNB (16”)

ANSI-900, API 3000

6746001

R35F5

80mmNB (3”)

ANSI-1500, API 5000

6742001

R67F5

400mmNB (16”)

ANSI-1500

6746002

R37F5

100mmNB (4”)

ANSI-3/6/900, API 2/3000

6742002

R73F5

500mmNB (20”)

ANSI-3/600, API 2000

6747001

R39F5

100mmNB (4”)

ANSI-1500, API 5000

6741003

R75F5

500mmNB (20”)

ANSI-1500

6748001

R Ring Gasket Oval – 316 Stainless Steel (SS) Ring No.

Size

Rating

Part Number

Ring No.

Size

Rating

R11316

15mmNB (1⁄2”)

ANSI-3/600

6745003

R32316

80mmNB (3”)

ANSI-2500

Part Number 6904002

R12316

15mmNB (1⁄2”)

ANSI-9/1500

6714002

R37316

100mmNB (4”)

ANSI-3/6/900, API 2/3000

6905002

R13316

15 – 20mmNB (1⁄2” – 3⁄4”)

ANSI-3/600, 2500

6709001

R39316

100mmNB (4”)

ANSI-1500, API 5000

6905003

R14316 R16316 R18316

20mmNB (3⁄4”) 20 – 25mmNB (3⁄4” – 1”) 25 – 32mmNB (1” – 1¼”)

ANSI-900/1500 ANSI-2500, 3/6/9/1500 ANSI-2500, 3/6/9/1500

6709003 6709005 6709007

R44316 R45316 R46316

125mmNB (5”) 150mmNB (6”) 150mmNB (6”)

ANSI-1500, API 5000 ANSI-3/6/900, API 2/3000 ANSI-1500, API 5000

6715004 98720005 6901001

R20316

40mmNB (11⁄2”)

ANSI-3/6/9/1500 + API

6709009

R49316

200mmNB (8”)

ANSI-3/6/900, API 2/3000

6901002

R22316

50mmNB (2”)

ANSI-150

6709011

R50316

200mmNB (8”)

ANSI-1500, API 5000

6901003

R23316

40 – 50mmNB (11⁄2” – 2”)

ANSI-2500, 3/600 +

6709013

R53316

250mmNB (10”)

ANSI-3/6/900, API 2/3000

6902001

R24316

50mmNB (2”)

ANSI-9/1500, API3/5000

6709015

R54316

250mmNB (10”)

ANSI-1500, API 5000

6902002

R26316

50 – 65mmNB (2” – 21⁄2”)

ANSI-2500, 3/600 +

6709017

R57316

300mmNB (12”)

ANSI-3/6/900, API 2/3000

6902003

R27316

65mmNB (21⁄2”)

ANSI-9/1500, API3/5000

98720033

R58316

300mmNB (12”)

ANSI-1500

6903001

R28316

65mmNB (21⁄2”)

ANSI-2500

6715002

R66316

400mmNB (16”)

ANSI-900, API 3000

6903002

R30316

80mmNB (3”)

ANSI-3/600

6715003

R73316

500mmNB (20”)

ANSI-3/600, API 2000

6905001

R35316

80mmNB (3”)

ANSI-1500, API 5000

98720009

R75316

500mmNB (20”)

ANSI-1500

6906001

R Ring Gasket Octagonal – 316 Stainless Steel (SS) Ring No.

Size

Rating

Part Number

Ring No.

Size

Rating

R13316

15 – 20mmNB (1⁄2” – 3⁄4”)

ANSI-3/600, 2500

6709002

R44316

125mmNB (5”)

ANSI-1500 + API5000

6711004

R14316

20mmNB (3⁄4”)

ANSI-9/1500

6709004

R45316

150mmNB (6”)

ANSI-3/6/900 + API2/3000

6711005

R16316

20 – 25mmNB (3⁄4” – 1”)

ANSI-2500, 3/6/9/1500

6709006

R46316

150mmNB (6”)

ANSI-1500 + API5000

6712001

R18316

25 – 32mmNB (1” – 1¼”)

ANSI-2500, 3/6/9/1500

6709008

R47316

150mmNB (6”)

ANSI-2500

6712002

R20316

40mmNB (11⁄2”)

ANSI-3/6/9/1500 + API

6709010

R49316

200mmNB (8”)

ANSI-3/6/900 + API2/3000

6712003

R22316

50mmNB (2”)

ANSI-150

6709012

R50316

200mmNB (8”)

ANSI-1500 + API5000

6713001

R23316

40 – 50mmNB (11⁄2” – 2”)

ANSI-2500, 3/600 +

6709014

R53316

250mmNB (10”)

ANSI-3/6/900 + API2/3000

6713002

R24316

50mmNB (2”)

ANSI-9/1500 + API3/5000

6709016

R54316

250mmNB (10”)

ANSI-1500 + API5000

6713003

R26316

50 – 65mmNB (2” – 21⁄2”)

ANSI-2500, 3/600 +

6709018

R57316

300mmNB (12”)

ANSI-3/6/900 + API2/3000

6714001

R27316

65mmNB (21⁄2”)

ANSI-9/1500 + API3/5000

6710001

R58316

300mmNB (12”)

ANSI-1500

98720017

R28316

65mmNB (21⁄2”)

ANSI-2500

6710002

R66316

400mmNB (16”)

ANSI-900 API 3000

6802001

R30316

80mmNB (3”)

ANSI-3/600

6710003

R67316

400mmNB (16”)

ANSI-1500

98720013

R31316

80mmNB (3”)

ANSI-3/6/900 + API2/3000

6710004

R73316

500mmNB (20”)

ANSI-3/600 API 2000

6802002

R32316

80mmNB (3”)

ANSI-2500

6710005

R74316

500mmNB (20”)

ANSI-900 API 3000

6804002

R35316

80mmNB (3”)

ANSI-1500 + API5000

6710006

R76316

600mmNB (24”)

ANSI-150

6907001

R37316

100mmNB (4”)

ANSI-3/6/900 + API2/3000

6711001

R78316

600mmNB (24”)

ANSI-900

6707002

R39316

100mmNB (4”)

ANSI-1500 + API5000

6711002

R93316

650mmNB (26”)

ANSI-3/600

6829001

R41316

125mmNB (5”)

ANSI-3/6/900 + API2/3000

6711003

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number

1043


19

API – ANSI Ring Joint Gaskets Ring Joint Gaskets – RX Style • The RX style gasket is designed to fit the modern flat bottom groove and is interchangeable with the standard Style R ring type joint (larger flange make up distances will result) • Manufactured in accordance with API 6A and ASME B16.20, to suit API 6B and ASME B16.5 flanges • Selected sizes incorporate a pressure passage hole to allow for pressure equalisation each side of the sealing faces Class and Standard: 720 – 5000 API 6B Flanges

Nominal Pipe Size: 11⁄2 – 20” Tolerances: A: +0.008, - 0.000 H: +0.008, - 0.000

D: +0.000, - 0.030

RX Ring Gasket – Low Carbon Steel (S)

E: ±0.02

Ring No.

Size

Rating

RX 20S

40mmNB (11⁄2”)

ANSI-3/400, API 2/3/5000

6733001

RX 23S

50mmNB (2”)

ANSI-3/400, API 2000

6733002

RX 24S

50mmNB (2”)

API 3/5000

6733003

RX 26S

65mmNB (21⁄2”)

ANSI-3/400, API 2000

6733004

RX 27S

65mmNB (21⁄2”)

API 3/5000

6734001

RX 31S

80mmNB (3”)

API 3000

6734002

RX 35S

80mmNB (3”)

API 5000

6734003

RX 37S

100mmNB (4”)

ANSI-3/400, API 2/3000

6734004

RX 39S

100mmNB (4”)

API 5000

6735001

RX 41S

125mmNB (5”)

ANSI-3/400, API 2/3000

6735002

RX 44S

125mmNB (5”)

API 5000

6736001

RX 45S

150mmNB (6”)

ANSI-3/400, API 2/3000

6736002

RX 4546S

150mmNB (6”)

45 API 2/3000, 46 API 5000

6737003

RX 46S

150mmNB (6”)

API 5000

6737001

RX 47S

200mmNB (8”)

API 5000

6737002

RX 49S

200mmNB (8”)

ANSI-3/400, API 2/3000

6738001

RX 50S

200mmNB (8”)

API 5000

6738002

RX 53S

250mmNB (10”)

ANSI-3/400, API 2/3000

6739001

RX 54S

250mmNB (10”)

API 5000

6740001

RX 57S

300mmNB (12”)

ANSI-3/400, API 2/3000

6825001

RX 65S

400mmNB (16”)

ANSI-3/400, API 2000

6826001

RX 66S

400mmNB (16”)

API 3000

6826002

RX 73S

500mmNB (20”)

ANSI-3/400, API 2000

6830001

RX 74S

500mmNB (20”)

API 3000

6817001

23°: ±1/2°

OD: +0.010, - 0.000 C: +0.006, - 0.000

Gasket Dimensions Ring No.

ID

OD

Pressure Class Rating Height

720-960 2,000 2,900

3,000

5,000

Nominal Pipe Size

1044

RX 20 RX 23 RX 24 RX 25 RX 26 RX 27 RX 31 RX 35 RX 37 RX 39 RX 41 RX 44 RX 45 RX 46 RX 47 RX 49 RX 50 RX 53 RX 54 RX 57 RX 63 RX 65 RX 66 RX 69 RX 70 RX 73 RX 74 RX 82 RX 84

2.313” 2.672” 3.234” 3.625” 3.469” 3.719” 4.359” 4.859” 5.359” 5.859” 6.609” 7.109” 7.797” 7.688” 8.094” 10.109” 9.844” 12.234” 11.969” 14.484” 15.266” 17.984” 17.719” 20.484” 20.094” 22.406” 22.094” 1.734” 1.984”

3.000” 3.672” 4.172” 4.313” 4.406” 4.656” 5.297” 5.797” 6.297” 6.797” 7.547” 8.047” 8.734” 8.750” 9.656” 11.047” 11.156” 13.172” 13.281” 15.422” 17.391” 18.922” 19.031” 21.422” 21.656” 23.469” 23.656” 2.672” 2.922”

0.750” 1” 1” 0.750” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1.125” 1.625” 1” 1.250” 1” 1.250” 1” 2” 1” 1.250” 1” 1.625” 1.250” 1.625” 1” 1”

11⁄2” 2” – – 21⁄2” – 3” – 4” – 5” – 6” – – 8” – 10” – 12” – 16” 18” – 20” – – –

– – – – – – – – – – – – – – – – – – – – – – – – – – – 1” 11⁄2”

RX 85 RX 86 RX 87 RX 88 RX 89 RX 90 RX 91 RX 99 RX 201 RX 205 RX 210 RX 215

2.484” 2.891” 3.266” 4.109” 3.672” 5.188” 8.922” 8.734” 1.573” 2.016” 3.094” 4.609”

3.547” 4.078” 4.453” 5.484” 5.109” 6.875” 11.297” 9.672” 2.026” 2.453” 3.844” 5.547”

1” 1.125” 1.125” 1.250” 1.250” 1.750” 1.781” 1” 0.445” 0.437” 0.750” 1”

– – – – – – – 8” – – – –

2” 21⁄2” 3” 4” 31⁄2” 5” 10” – – – – –

11⁄2” – 2” – – 21⁄2” 3” – 4” – 5” – 6” – – 8” – 10” – 12” – – 16” – 18” – 20” –

– – 2” 31⁄8” – 21⁄2” – 3” – 4” – 5” – 6” 8” – 8” – 10” – 14” – – – – – – –

– – – – – – – – 8 – – – –

– – – – – – – – – 13⁄8” 113⁄16” 29⁄16” 41⁄16”

Part Number

RX Ring Gasket – 316 Stainless Steel (SS) RX20 316SS

40mmNB (11⁄2”)

API 2000/3000

6701001

RX23 316SS

40 – 50mmNB (11⁄2” – 2”)

API 2000

6701002

RX24 316SS

50mmNB (2”)

API 3000/5000

6701003

RX25 316SS

80mmNB (3”)

API 5000

6701004

RX27 316SS

65mmNB (21⁄2”)

API 3000/5000

6701005

RX31 316SS

80mmNB (3”)

API 2000/3000

6701006

RX35 316SS

80mmNB (3”)

API 5000

6702001

RX37 316SS

100mmNB (4”)

API 2000/3000

6702002

RX39 316SS

100mmNB (4”)

API 5000

6702003

RX41 316SS

125mmNB (5”)

API 2000/3000

6703001

RX44 316SS

125mmNB (5”)

API 5000

6703002

RX45 316SS

150mmNB (6”)

API 2000/3000

6703003

RX46 316SS

150mmNB (6”)

API 5000

6704001

RX47 316SS

150mmNB (6”)

API 5000

6704002

RX49 316SS

200mmNB (8”)

API 2000/3000

6704003

RX50 316SS

200mmNB (8”)

API 5000

6705001

RX53 316SS

250mmNB (10”)

API 2000/3000

6705002

RX54 316SS

250mmNB (10”)

API 5000

6706001

RX57 316SS

300mmNB (12”)

API 5000

6707001

RX66 316SS

400mmNB (16”)

API 3000

6715001

RX73 316SS

500mmNB (20”)

API 2000

6708001

RX74 316SS

500mmNB (20”)

ANSI-900, API 3000

6801001

The little things, but not every thing. No matter what your thing, get it @ ATOM


API – ANSI Ring Joint Gaskets

19

Ring Joint Gaskets – BX Style • Manufactured to standards ASME B 16.20 - API Spec. 6A • Low carbon steel

Class and Standard: 5,000 – 20,000 API 6BX Flanges

Nominal Pipe Size: 111⁄16” – 211⁄4” Tolerances: A: + 0.008, - 0.000

OD: + 0.000, - 0.005

H: + 0.008, - 0.000

C: + 0.006, - 0.000

D: ± 0.02

23°: ± 1⁄4°

Gasket Dimensions Ring No. ID

OD

BX Ring Gasket – Low Carbon Steel (S)

ODT: ± 0.002

Ring No.

Pressure Class Rating Height

2,000

3,000

5,000

10,000

15,000

20,000

– – – – – – – – –

111⁄16” 113⁄16” 2 1⁄16” 2 9⁄16 3 1⁄16” 4 1⁄16” 7 1⁄16” 9” 11” 13 5⁄8” – – 16 3⁄4” – 18 3⁄4” – 211⁄4” – – 51⁄8 6 5⁄8” 8 9⁄16” 115⁄32” –

111⁄16” 113⁄16” 2 1⁄16” 2 9⁄16” 3 1⁄16” 4 1⁄16” 7 1⁄16” 9” 11” 135⁄8” – – 16 3⁄4” – 18 3⁄4” – – – – – 6 5⁄8” 8 9⁄16” 115⁄32” –

– – 2 1⁄16” 2 9⁄16” 3 1⁄16” 4 1⁄16” 7 1⁄16” – 11” 13 5⁄8” – – – – – – – – – – – – – –

Nominal Pipe Size BX 150 BX 151 BX 152 BX 153 BX 154 BX 155 BX 156 BX 157 BX 158 BX 159 BX 160 BX 161 BX 162 BX 163 BX 164 BX 165 BX 166 BX 167 BX 168 BX 169 BX 170 BX 171 BX 172 BX 303

2.110” 2.250” 2.528” 3.078” 3.624” 4.705” 7.901” 9.941” 12.038” 14.776” 14.768” 18.071” 17.600” 20.528” 20.527” 23.139” 23.140” 28.864” 28.864” 5.813” 7.464” 9.409” 11.993” 32.237”

2.842” 3.008” 3.334” 3.974” 4.600” 5.825” 9.637” 11.593” 13.860” 16.800” 15.850” 19.347” 18.720” 21.896” 22.463” 24.595” 25.198” 29.896” 30.128” 6.831” 8.584” 10.529” 13.113” 33.573”

0.366” 0.379” 0.403” 0.448” 0.488” 0.560” 0.733” 0.826” 0.911” 1.012” 0.938” 1.105” 0.560” 1.185” 1.185” 1.261” 1.261” 1.412” 1.412” 0.624” 0.560” 0.560” 0.560” 1.494”

– – – – – – – – – – – – – – – – – 263⁄4” – – – – – 30”

– – – – – – – – – – – – – – – – – – 26 3⁄4” – – – – 30”

13 5⁄8” 16 3⁄4” 16 3⁄4” 18 3⁄4” – 211⁄4” – – – – – – –

Size

BX 150S 111⁄16” BX 151S 113⁄16” BX 152S 2 1⁄16” BX 153S 2 9⁄16” BX 154S 3 1⁄16” BX 155S 4 1⁄16” BX 169S 5 1⁄8” BX 170S 6 5⁄8” BX 156S 7 1⁄16” BX 157S 9” BX 158S 11” BX 159S 13 5⁄8” BX 160S 13 5⁄8” BX 161S 16 3⁄4” BX 162S 16 3⁄4” BX 163S 18 3⁄4” BX 164S 18 3⁄4” BX 165S 211⁄4” BX Ring Gasket – 316 Stainless Steel (SS) Ring No. Size BX 150 111⁄16” BX 151 113⁄16” BX 152 2 1⁄16” BX 153 2 9⁄16” BX 154 3 1⁄16” BX 155 4 1⁄16” BX 169 5 1⁄8” BX 156 7 1⁄16” BX 157 9” BX 158 11” BX 159 13 3⁄8” BX 160 13 5⁄8” BX 163 18 3⁄4” BX 164 18 3⁄4”

Working Pressure

Part Number

10,000 – 15,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000psi 10,000 – 15,000psi 10,000 – 20,000psi 10,000 – 15,000psi 10,000 – 15,000psi 10,000psi 5,000psi 5,000psi 5,000 – 10,000psi 5,000psi 10,000psi 5,000psi

6717001 6717002 6717003 6717004 6717005 6717006 6816002 6745002 6718001 6745001 6718002 6719001 6721001 6724001 6813001 6814001 6815001 6816001

Working Pressure 10,000 – 15,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000 – 20,000psi 10,000psi 10,000 – 20,000psi 10,000 – 15,000psi 10,000 – 15,000psi 10,000psi 5,000psi 5,000psi 10,000psi

Part Number 6807001 6807002 6807003 6807004 6807005 6807007 6812001 6808001 98720039 6808002 6808003 6809001 6811001 6811002

Ring Joint Gaskets – AX & VX Style

Not the gaskets you’re looking for? Find more on page 1,005

AX & VX Ring Gasket – 316 Stainless Steel (SS) Product Code

Size

Description

Part Number

111053-1

18 – 3⁄4”

AX Vetco

10444002

041700-47

18 – 3⁄4’’

No Seals

88893585

SUBX3A3

31⁄8’’ – 31⁄16’’

10,000 – 15,000mmNB

98720035

688711-18-10

18 – 3⁄4’’

LCMS Cad Plated No Seals 10K

10444003

1800 999 024 | atom.com.au | getit@atom.com.au

1045


19

Non-Sparking – Grinders & Accessories CUT THE HEAT, Reduce The Risk

Angle Grinders • • • • • •

No hot sparks Low heat (Average 30°C – 60°C grinding steel) Low noise (<85dBA) No dangerous sharp splinters Low vibration (Average < 2.5m/s) Roughness profile 40 – 75 micron’s

92368458

Safety Tools were developed in close cooperation with Statoil in Norway over 10 years ago. They have been rigidly tested in the harshest environments and proven safe and effective. The tools are regularly used globally. Safety Tools Allmet specialises in unique cold work surface preparation and cutting tools. The equipment follows Atex guidelines and is safe to use in Ex gas zones 1 and 2 (dust zones 21 and 22) without a hot work permit. For over a decade, Safety Tools have been safely used around the world and offer substantial health & safety and environmental benefits.

92368461

92368459 Product Code

Speed

Weight

Air Inlet

Part Number

A-0104 A-0108 A-0105

2,000rpm 2,000rpm 1,000rpm

1,700g 842g 2,400g

1

⁄4” NPT 1 ⁄4” NPT 1 ⁄4” NPT

92368458 92368461 92368459

When you use Safety Tools there is:

Rotating Files

No hot sparks

Low heat (Average 30°C to 60°C grinding steel)

• A range of shapes and lengths to suit different filing applications

Low noise (<85 dBA)

No dangerous sharp splinters

Low vibration (Average < 2.5 m/s)

Roughness profile 40 – 75 microns

92368447

Get a demonstration Contact ATOM for a safety tool demonstration and reduce the risk on your site. Straight Grinder A-0107 • • • • • • • • •

3,000rpm 894g 1 ⁄4” NPT air inlet No hot sparks Low heat (Average 30°C – 60°C grinding steel) Low noise (<85dBA) No dangerous sharp splinters Low vibration (Average < 2.5m/s) Roughness profile 40 – 75 micron’s

92368451

92368452

92368448

92368428

92368449

92368450

92368429

92368453

92368454

92368455

Product Code

Description

Length

Weight

Part Number

A-0001 A-0002 A-0003 A-0004 A-0005 A-0006 A-0007 A-0008 A-0009B A-0009C A-0010

STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0107/0104 STA A-0108 STA A-0108

65mm 70mm 70mm 65mm 65mm 65mm 57mm 72mm 95mm 95mm 118mm

76g 114g 110g 182g 168g 78g 194g 282g 340g 340g 826g

92368447 92368448 92368428 92368449 92368450 92368451 92368452 92368429 92368453 92368454 92368455

Grinding Discs A-0500 • • • •

92368460

1046

Used for paint Suits STA A-0105 410g 80mm dia.

92368456

The little things, but not every thing. No matter what your thing, get it @ ATOM


Non-Sparking – Grinder Kits & Accessories Grinder Handles

19

Grinder Cooling Cap A-0062 • Used for straight grinders • 126g

92368466

92368468

Grinder Covering

92368465 Product Code

Description

Weight

Part Number

A-0060 A-0060RB

Handle Handle for Rough Boy

724g 486g

92368466 92368465

A-0065 • For Fuji FCD10X50 • 164g

Grinding Kits

92368467

Grinder Drop Safety Device A-0068 • 66g 92368462

92368463

92368469

Welding Seam Cutting & Removing Systems 92368407

138935

60013811

Product Code

Description

Weight

Part Number

A-0058

Steel Grinding Suitcase Set Contains: A-0002, A-0003, A-0004, A-0005, A-0006, A-0007, A-0008, A-0009, A-0060, A-0062, A-0068, A-0107, A-0108

10kg

92368462

A-0059

Surface Protection Suitcase Set Contains: A-0500, A-0003, A-0004, A-0005, A-0009, A-0060, A-0062, A-0065, A-0068, A-0104, A-0105, A-0107

13kg

92368463

A-0055

Ship Owners Suitcase Set Contains: A-0500A-0003, A-0004, A-0005, A-0062, A-0065, A-0105, A-0107

10kg

92368464

A-0054

All-Round Suitcase Set Contains: A-0001, A-0002, A-0003, A-0004, A-0005, A-0006, A-0007, A-0008, A-0009 Steel, A-0009, A-0104, A-0105, A-0107, A-0108, A-0500, A-0060, A-0062, A-0065, A-0068

14kg

92368407

A-0057

Rough Boy Complete Suitcase Set Contains: A-0001, A-0002, A-0003, A-0004, A-0005, A-0006, A-0007, A-0008, A-0009 Steel, A-0009, A-0104, A-0105, A-0107, A-0108, A-0500, A-0060, A-0062, A-0065, A-0068, A-0060RB, A-0010

6.5kg

138935

A-0085

Empty Pelicase With Ex Certification Markings & Labels Special Fitted Antistatic Foam Special Designed For Tools Delivered From Safety Tools Allmet. Foam Colour Pink

Ask ATOM about our range of non-sparking tools.

92368474

92368598

92368475

Product Code

Description

Weight

Part Number

A-0300 A-0301 A-0302

Cutting & Removing Welding Seams Combined System Cutting System Removing Welding Seams System

10kg 13kg 14kg

92368598 92368474 92368475

Welding Seam Removal Discs

60013811

92368471

92368471

Product Code

Size

Weight

Part Number

A-0502 A-0503

Ø110 x 5mm Ø110 x 10mm

652g 1,420g

92368471 92368472

1800 999 024 | atom.com.au | getit@atom.com.au

1047

Profile for ATOM

Oil & Gas | ATOM  

ATOM's dedicated oil and gas team are at your disposal to ensure you get the right products for the job. If you need something unique that's...

Oil & Gas | ATOM  

ATOM's dedicated oil and gas team are at your disposal to ensure you get the right products for the job. If you need something unique that's...