__MAIN_TEXT__
feature-image

Page 1


Lifting LIFTING Polyester Slings  Wire Rope Slings  Wire Rope  Wire Rope Thimbles  Wire Rope Grips  Chain Slings  Lifting Chain  Lifting Hooks  Chain Links  Lifting & Spreader Beams  Chain Lever Blocks  Chain Blocks  Chain Hoists  Winches  Girder Trolleys & Clamps  Plate Clamps  Snatch Blocks  Lifting Tongs  Lifting & Commercial Grade Shackles  Lifting Eye Bolts & Nuts  Lifting Rings  Lifting Points  Lifting Panels 

592 593 – 594 594 594 594 595 595 595 – 596 596 596 597 598 599 600 600 600 – 601 601 601 601 – 602 602 – 605 604 606 606

10

Rigging RIGGING Rigging Tags  Rigging Screws  Turnbuckles  Commercial Chain  Commercial Hooks  Plastic Chain  Load Restraints  Loadbinders  Recovery Straps  Tie Down Straps  Rope 

607 608 609 – 610 611 – 612 611 612 613 – 614 614 614 614 – 615 616 – 617


Polyester Slings

10

Polyester Flat & Round Sling Working Load Limits (WLL) Care & Use for Polyester Slings Load Factor = L

L=1.0

L=0.8

L=2.0

Colour

Vertical WLL

Choke WLL

Basket WLL

L=1.9

L=1.7

L=1.4

30° WLL

60° WLL

90° WLL

Violet

1.0t

0.8t

2.0t

1.9t

1.7t

Green

2.0t

1.6t

4.0t

3.8t

3.4t

Yellow

3.0t

2.4t

6.0t

5.7t

Grey

4.0t

3.2t

8.0t

Red

5.0t

4.0t

Brown

6.0t

Blue

L=1.0

L=1.7

L=1.4

120° WLL

60° WLL

60° Choke WLL

1.4t

1.0t

1.7t

1.4t

2.8t

2.0t

3.4t

2.8t

5.1t

4.2t

3.0t

5.1t

4.2t

7.6t

6.8t

5.6t

4.0t

6.8t

5.6t

10.0t

9.5t

8.5t

7.0t

5.0t

8.5t

7.0t

4.8t

12.0t

11.4t

10.2t

8.4t

6.0t

10.2t

8.4t

8.0t

6.4t

16.0t

15.2t

13.6t

11.2t

8.0t

13.6t

11.72t

Orange

10.0t

8.0t

20.0t

19.0t

17.0t

14.0t

10.0t

17.0t

14.0t

Orange

12.0t

9.6t

24.0t

22.8t

20.4t

16.8t

12.0t

20.4t

16.8t

Orange

15.0t

12.0t

30.0t

29.5t

25.5t

21.0t

15.0t

25.5t

21.0t

Orange

20.0t

16.0t

40.0t

38.0t

34.0t

28.0t

20.0t

34.0t

28.0t

Orange

30.0t

24.0t

60.0t

57.0t

51.0t

52.0t

30.0t

51.0t

52.0t

Orange

50.0t

40.0t

100.0t

95.0t

85.0t

70.0t

50.0t

85.0t

70.0t

• Slings have a lifespan of 10 years from date of manufacture • Never overload the equipment • Do not use if ID tag is removed • Inspect before every use to ensure slings are not damaged • Do not use sling if there is any sign of cut webbing, snagging, tearing, chemical or heat damage, excessive wear, damaged seams or any other defect • Do not tie knots in sling webbing • Protect sling webbing from sharp edges of load • Use protective gloves/sleeves • Do not expose slings to temperatures above 90°C • Do not allow grit or abrasive material to penetrate the fibres • Consult with manufacturer’s recommendations before immersing a sling in a chemical solution • Keep slings away from strong alkalis and phenolic compounds

Polyester Slings – Flat • Used in various lifting applications in conjunction with cranes, hoists and chain blocks • Made from 2 ply polyester webbing with formed eyes at each end • Each sling is individually load tested and supplied with a test certificate and individualised serial number • Colour coded and striped for easy identification • Complies with AS1353.1-1997 • Special sizes made to order up to 50m in length and 20t WLL Violet – WLL: 1 Tonne

Green – WLL: 2 Tonnes

Yellow – WLL: 3 Tonnes

Grey – WLL: 4 Tonnes

Red – WLL: 5 Tonnes

Brown – WLL: 6 Tonnes

Length

Part Number

Part Number

Part Number

Part Number

Part Number

Part Number

1m

91188355

91180071

91188370

2m

91180052

91180057

91180062

91188379

91188387

91188474

3m

91180053

91180058

91180063

91188381

91180099

32000098

4m

91180054

91180059

91180064

91180128

91180100

79903206

5m

91180055

91180060

60017460

60017461

91188420

88890624

6m

91188361

90040092

91180066

91180127

91188392

36003678

8m

91188362

91188369

91188377

91188385

91188393

36003679

Polyester Slings – Endless, Round • Used in various lifting applications in conjunction with cranes, hoists and chain blocks • Made from 100% polyester load bearing high tenacity fibre • Each sling is individually load tested and supplied with a test certificate and individualised serial number • Colour coded and striped for easy identification • Complies with AS4497.1-1997 • Special sizes made to order up to 50m in length and 80t WLL

592

Violet – WLL: 1 Tonne

Green – WLL: 2 Tonnes

Yellow – WLL: 3 Tonnes

Grey – WLL: 4 Tonnes

Red – WLL: 5 Tonnes

Brown – WLL: 6 Tonnes

Length

Part Number

Part Number

Part Number

Part Number

Part Number

Part Number

1m 2m 3m 4m 5m 6m 8m

81002375 91180002 91180003 91180004 91180005 91180006 91180008

91180108 91180011 91180012 91180013 91180014 91180030 197747

88838346 91180016 91180017 91180018 91180019 91180084 90040551

91180083 91180021 91180022 91180023 91180024 91180082 91180122

91180085 91180026 91180027 91180028 91180029 91180086 36003681

91180087 98881305 91180088 91180031 91180089 91180090 193713

The little things, but not every thing. No matter what your thing, get it @ ATOM


Wire Rope Slings

10

Using your Wire Rope Sling Safely • Never exceed the WLL (working load limit). Always know the lifting capacity of your wire rope. Overloading will cause individual wires to fracture and stretch. • Avoid kinking by ensuring that wire ropes are not used on sharp corners of your load. If this is unavoidable, make use of a wire rope protective sleeve. • Never attempt to shorten the length of a wire rope sling by tying a knot in it. If you require to lift an uneven load source, use a specially designed sling.

• Ensure that when using a multi-leg sling, the load is spread evenly and is as balanced as possible. Careless placement of the load will cause damage to your sling. • Do not expose wire ropes to any cutting or welding operations. • Do not use excessive force to hammer wire rope into an unnatural position such as a choke hitch. If this is required, a synthetic sling will better serve the application.

Wire Rope Slings – Working Load Limits Choke Hitch Method Of Loading

Direct Loaded

Round Load

Basket Hitch

Rectangle Load

Round Load

Choke Hitch Direct Loaded

Other Than Round Load

Other Than Round Load

Round Load Single Wrap

Double Wrap

Single Wrap

Double Wrap

0 – 45°

0 – 60°

0 – 45°

0 – 60°

0.71 0.90 1.11 1.34 1.59 1.87 2.20 2.80 3.60 4.40 5.40 6.40 7.50 8.70 11.30

0.71 0.90 1.11 1.34 1.59 1.87 2.20 2.80 3.60 4.40 5.40 6.40 7.50 8.70 11.30

0.48 0.60 0.74 0.90 1.07 1.25 1.45 1.90 2.40 3.00 3.60 4.30 5.00 5.80 7.60

0.48 0.60 0.74 0.90 1.07 1.25 1.45 1.90 2.40 3.00 3.60 4.30 5.00 5.80 7.60

1.01 1.29 1.59

1.01 1.29 1.59

1.68 0.86 1.06

1.68 0.86 1.06

1.92 2.30 2.70 3.10 4.10 5.10 6.30 7.70 9.10 10.70 12.40 16.30 21.00 25.00 31.00 37.00 43.00 50.00 57.00

1.92 2.30 2.70 3.10 4.10 5.10 6.30 7.70 9.10 10.70 12.40 16.30 21.00 25.00 31.00 37.00 43.00 50.00 57.00

1.29 1.53 1.80 2.10 2.70 3.40 4.20 5.10 6.10 7.20 8.30 10.90 13.80 17.00 21.00 24.00 29.00 33.00 38.00

1.29 1.53 1.80 2.10 2.70 3.40 4.20 5.10 6.10 7.20 8.30 10.90 13.80 17.00 21.00 24.00 29.00 33.00 38.00

Rope

Included Angle Nom. Dia. (mm) 8 9 10 11 12 13 14 16 18 20 22 24 26 28 32

Min. Breaking Force (kN) 28.2 35.6 44.0 53.2 63.3 74.3 86.2 113 143 176 213 253 297 345 450

0.55 0.69 0.85 1.03 1.23 1.44 1.67 2.20 2.80 3.40 4.10 4.90 5.80 6.70 8.70

0.41 0.52 0.64 0.77 0.92 1.08 1.25 1.64 2.10 2.60 3.10 3.70 4.30 5.00 6.50

8 9 10 11

40.2 51.1 63.1 76.3

0.78 0.99 1.22 1.48

0.58 0.74 0.92 1.11

0.39 0.49 0.61 0.74

1.56 1.98 2.40 3.00

1.35 1.71 2.10 2.60

1.10 1.40 1.72 2.10

0.78 0.99 1.22 1.48

0.78 0.99 1.22 1.48

0.68 0.86 1.06 1.29

0.55 0.70 0.87 1.05

0.39 0.49 0.61 0.74

1.35 1.71 2.10 2.60

1.10 1.40 1.72 2.10

0.78 0.99 1.22 1.48

12 13 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56 60

90.8 107 124 161 204 252 305 363 426 494 646 817 1,010 1,220 1,450 1,710 1,980 2,270

1.76 2.10 2.40 3.10 4.00 4.90 5.90 7.00 830 9.60 12.50 15.80 19.60 24.00 28.00 33.00 38.00 44.00

1.32 1.55 1.80 2.30 3.00 3.70 4.40 5.30 6.20 7.20 9.40 11.90 14.70 17.70 21.00 25.00 29.00 33.00

0.88 1.04 1.20 1.56 1.98 2.40 3.00 3.50 4.10 4.80 6.30 7.90 9.80 11.80 14.00 16.60 19.20 22.00

3.50 4.10 4.80 6.20 7.90 9.80 11.80 14.10 16.50 19.10 25.00 32.00 39.00 47.00 56.00 60.00 77.00 88.00

3.00 3.60 4.20 5.40 6.80 8.40 10.20 12.20 14.30 16.60 22.00 27.00 34.00 41.00 49.00 57.00 66.00 76.00

2.50 2.90 3.40 4.40 5.60 6.90 8.30 9.90 11.60 13.50 17.60 22.00 28.00 33.00 40.00 47.00 54.00 62.00

1.76 2.10 2.40 3.10 4.00 4.90 5.90 7.00 8.30 9.60 12.50 15.80 19.60 24.00 28.00 33.00 38.00 44.00

1.76 2.10 2.40 3.10 4.00 4.90 5.90 7.00 8.30 9.60 12.50 15.80 19.60 24.00 28.00 33.00 38.00 44.00

1.53 1.80 2.10 2.70 3.40 4.20 5.10 6.10 7.20 8.30 10.90 13.80 17.00 21.00 24.00 29.00 33.00 38.00

1.25 1.47 1.71 2.20 2.80 3.50 4.20 5.00 5.90 6.80 8.90 11.20 13.90 16.80 19.90 24.00 27.00 31.00

0.88 1.04 1.20 1.56 1.98 2.40 3.00 3.50 4.10 4.80 6.30 7.90 9.80 11.80 14.00 16.60 19.20 22.00

3.00 3.60 4.20 5.40 6.80 8.40 10.20 12.20 14.30 16.60 22.00 27.00 34.00 41.00 49.00 57.00 66.00 76.00

2.50 2.90 3.40 4.40 5.60 6.90 8.30 9.90 11.60 13.50 17.60 22.00 28.00 33.00 40.00 47.00 54.00 62.00

1.76 2.10 2.40 3.10 4.00 4.90 5.90 7.00 8.30 9.60 12.50 15.80 19.60 24.00 28.00 33.00 38.00 44.00

60°

90°

120°

60°

90°

120°

0 – 60° 90°

120°

Safe Working Loads in Tonnes – Under General Use With 1570 Grade Wire And Fibre Core With Ferrule Secured Eyes 0.27 0.34 0.43 0.52 0.61 0.72 0.83 1.09 1.38 1.70 2.10 2.50 2.90 3.30 4.40

1.09 1.38 1.70 2.10 2.50 2.90 3.30 4.40 5.50 6.80 8.30 9.80 11.50 13.40 17.40

0.94 1.19 1.47 1.78 2.10 2.50 2.90 3.80 4.80 5.90 7.10 8.50 10.00 11.60 15.10

0.77 0.97 1.20 1.45 1.73 2.00 2.40 3.10 3.90 4.80 5.80 6.90 8.10 9.40 12.30

0.55 0.69 0.85 1.03 1.23 1.44 1.67 2.20 2.80 3.40 4.10 4.90 5.80 6.70 8.70

0.55 0.69 0.85 1.03 1.23 1.44 1.67 2.20 2.80 3.40 4.10 4.90 5.80 6.70 8.70

0.48 0.60 0.74 0.90 1.07 1.25 1.67 1.90 2.40 3.00 3.60 4.30 5.00 5.80 7.60

0.39 0.49 0.61 0.73 0.87 1.02 1.19 1.55 1.97 2.40 2.90 3.50 4.10 4.70 6.20

0.27 0.34 0.43 0.52 0.61 0.72 0.83 1.09 1.38 1.70 2.10 2.50 2.90 3.30 4.40

0.94 1.19 1.47 1.78 2.10 2.50 2.90 3.80 4.80 5.90 7.10 8.50 10.00 11.60 15.10

0.77 0.97 1.20 1.45 1.73 2.00 2.40 3.10 3.90 4.80 5.80 6.90 8.10 9.40 12.30

0.55 0.69 0.85 1.03 1.23 1.44 1.67 2.20 2.80 3.40 4.10 4.90 5.80 6.70 8.70

Safe Working Loads in Tonnes – Under General Use With 1770 Grade Wire And Wire Rope Core With Ferrule Secured Eyes

1800 999 024 | atom.com.au | getit@atom.com.au

593


Wire Ropes, Slings, Thimbles & Grips

10

Wire Rope

Wire Rope Slings

• Used in a variety of applications including slings, winch cables and hoist ropes • Please contact ATOM with your specifications Made To Your Requirements: • Wide range of constructions, core types, grades and finishes available • Can be supplied at specially ordered lengths • Can be fitted with your choice of termination • Manufacturers test certificate available upon request • Sizes available ranging from 2mm to over 30mm

• All slings and assemblies are permanently marked with working load limit, based on 5:1 factor of safety • All slings and assemblies manufactured in accordance with AS1666 • Please contact ATOM with your specifications Made To Your Requirements: • Hand spliced or machine swaged slings • Can be fitted with your choice of terminations • Can be manufactured and tested at short notice

1x7

1 x 19

7 x 7 WSC

7 x 19

Soft Eye Machine Swaged

Steel Ferrule Machine Swaged

Thimble Eye Machine Swaged

Closed Swage Socket

Soft Eye Hand Spliced

Open Swage Socket

Thimble Eye Hand Spliced

Closed Spelter Socket

Wire Rope Thimbles 18 x 7 FC

1 x 37

PVC 6 x 19 +FC

PVC 6 x 7 + FC

• Galvanised • Available as Australian Standards tested or commercial • Stainless steel and other sizes available on request

Commercial Australian Standards – Tested BS462 6 x 19S + IWRC

6 x 25Fi + WRC

6 x 19 + FC

6 x 24 + FC

Commercial

Product Code

Size

Part Number

Product Code

Size

Part Number

WRT06

6mm

60015030

WRT04C

4mm

8203001

WRT08

8mm

60015031

WRT05C

5mm

8203002

Can’t make the cut?

WRT10

10mm

60015032

WRT06C

6mm

8203003

WRT14

14mm

60015033

WRT08C

8mm

8203004

Get wire rope cable cutters on page 401

WRT16

16mm

91260074

WRT10C

10mm

8203005

WRT20

20mm

91260093

WRT13C

13mm

8204001

WRT26

26mm

60015035

WRT14C

14mm

8204002

WRT28

28mm

8205003

WRT16C

16mm

8204003

WRT32

32mm

8206001

WRT20C

20mm

8204004

Wire Rope Grips • Galvanised • Available as Australian Standards tested or commercial • Stainless steel and other sizes available on request

Wire Rope – Scaffold Lashing 716302M • • • •

Used for securing scaffold planks 2mm 7 x 7 construction Sold per 1,000m roll

88853422

594

Commercial Australian Standards – Tested BS462 Product Code

Size

WRG06 WRG08 WRG10 WRG13 WRG16 WRG20 WRG25 WRG28 WRG32 WRG38

6mm 8mm 10mm 13mm 16mm 20mm 25mm 28mm 32mm 40mm

Part Number 8209003 8209004 8209005 8210001 8210003 8210004 8211002 8211003 8211004 8212001

Commercial Product Code

Size

Part Number

WRG03C WRG04C WRG05C WRG06C WRG08C WRG10C WRG13C WRG16C WRG20C –

3mm 4mm 5mm 6mm 8mm 10mm 13mm 16mm 20mm –

8207001 91260108 8207002 8207003 8207004 8207005 8207006 8208001 8208002 –

The little things, but not every thing. No matter what your thing, get it @ ATOM


Chain Slings & Links, Lifting Chain & Hooks

10

Grade T(80) Alloy Chain Slings Max. Working Load Limits Single Leg Sling

Slings of 2, 3 or 4 Legs

Endless Slings

Care & Use of Chain Slings Chain Dia. 6mm 7mm 8mm 10mm 13mm 16mm 20mm 22mm 26mm 32mm

Straight

Adjustable

Reeved

60°

90°

120°

60°

60°

90°

120°

Reeved Sling

1.1t 1.5t 2.0t 3.2t 5.3t 8.0t 12.5t 15.0t 21.2t 31.5t

0.8t 1.1t 1.5t 2.4t 4.0t 6.0t 9.4t 11.3t 15.9t 23.6t

0.8t 1.1t 1.5t 2.4t 4.0t 6.0t 9.4t 11.3t 15.9t 23.6t

1.9t 2.6t 3.5t 5.5t 9.2t 13.8t 21.6t 26.0t 36.7t 54.5t

1.6t 2.1t 2.8t 4.5t 7.5t 11.3t 17.6t 21.2t 29.9t 44.4t

1.1t 1.5t 2.0t 3.2t 5.3t 8.0t 12.5t 15.0t 21.2t 31.5t

1.5t 2.0t 2.6t 4.1t 6.9t 10.4t 16.3t 19.5t 27.6t 41.0t

1.5t 2.0t 2.6t 4.1t 6.9t 10.4t 16.3t 19.5t 27.6t 41.0t

1.2t 1.6t 2.1t 3.4t 5.6t 8.5t 13.3t 15.9t 22.5t 33.4t

0.8t 1.1t 1.5t 2.4t 4.0t 6.0t 9.4t 11.3t 15.9t 23.6t

1.7t 2.3t 3.0t 4.8t 8.0t 12.0t 18.8t 22.5t 31.8t 47.3t

• Always visually inspect chain and fittings before use • Ensure chain is free from twist and is protected from sharp corners on loads • Never heat treat alloy chain or fittings • Store in clean dry area • Do not exceed WLL • Do not exceed 120°

Lifting Chain Slings – Grade T(80) Alloy

Metal Chain – Lifting Grade T(80), Alloy

• With clevis self-locking hook and shortening grab hook • Used to lift heavy loads in conjunction with cranes, hoists and blocks • Pre-tested and supplied with test certificate and safety tag • All alloy chain slings comply with AS3775.1-2004 • The capacities for the double leg slings are based on WLL at 60° • Made to order chain slings (tested and tagged) are also available in various sizes and configurations on request

• Used in conjunction with chain sling components for lifting of heavy loads via cranes, hoists and blocks • Elongation at break min. 17% proof test = 2 x WLL • Black • Complies with AS2321-2001 and ISO 3076 Grade T (Class 8) • Sold per metre • Dimensions below subject to tolerance

Product Code

Chain Dia.

WLL (No Deration) No. of Legs

Leg Length

Part Number

CS0711 CS0712 CS0713 CS0721 CS0722 CS0723 CS0811 CS0812 CS0813 CS0821 CS0822 CS0823 CS1011 CS1012 CS1013 CS1021 CS1022 CS1023 CS1024 CS1026 CS1311 CS1312 CS1313 CS1322 CS1323 CS1326

7mm 7mm 7mm 7mm 7mm 7mm 8mm 8mm 8mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 13mm 13mm 13mm 13mm 13mm 13mm

1.5t 1.5t 1.5t 2.6t 2.6t 2.0t 2.0t 2.0t 2.0t 3.5t 3.5t 3.5t 3.2t 3.2t 3.2t 5.5t 5.5t 5.5t 5.5t 5.5t 5.3t 9.2t 9.2t 9.2t 9.2t 9.2t

1m 2m 3m 1m 2m 3m 1m 2m 3m 1m 2m 3m 1m 2m 3m 1m 2m 3m 4m 6m 1m 2m 3m 2m 3m 6m

91188316 91188317 91188318 91188298 91188320 90040408 91188321 91188322 91188323 91188324 90040407 91188325 90040392 91188326 91188327 91188328 91188329 90040003 79013936 90040662 121951 33580012 91188330 91188331 91188332 90040006

1 1 1 2 2 2 1 1 1 2 2 2 1 1 1 2 2 2 2 2 1 1 1 2 2 2

Product Code Chain Dia. WLL

Outside Width

Inside Length

Weight

Part Number

CA06 CA07 CA08 CA10 CA13 CA16 CA20 CA22 CA26 CA32

21.5mm 26.0mm 28.0mm 35.0mm 45.5mm 56.0mm 70.0mm 77.0mm 91.0mm 112.0mm

19mm 21mm 24mm 30mm 39mm 48mm 60mm 66mm 78mm 96mm

0.87kg/m 1.10kg/m 1.40kg/m 2.20kg/m 3.80kg/m 5.70kg/m 9.00kg/m 10.90kg/m 15.20kg/m 23.00kg/m

88895371 91257997 88844289 81004106 88891341 91250015 88893768 91257998 91250024 91257999

6mm 7mm 8mm 10mm 13mm 16mm 20mm 22mm 26mm 32mm

1.1t 1.5t 2.0t 3.2t 5.3t 8.0t 12.5t 15.0t 21.2t 31.5t

Lifting Hooks – Eye & Clevis Pin, Shortening • Eye and clevis (pin) shortening grab hooks are used when the shortening of the chain is required on chain sling assemblies, without reduction in WLL • Designed with supporting lugs both sides to prevent chain link deformation • Complies with AS3776

Chain Dia. WLL 6mm 7 – 8mm 10mm 13mm 16mm 20mm 22mm 26mm 32mm

1.1t 2.0t 3.2t 5.3t 8.0t 12.5t 15.0t 21.2t 31.5t

Product Code AGHE06 AGHE08 AGHE10 AGHE13 AGHE16 AGHE20 AGHE22 AGHE26 AGHE32

Eye Unit Weight 120g 210g 650g 1.36kg 2.00kg 2.86kg 4.45kg 9.62kg 17.00kg

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number 90048307 91290011 91290071 90048310 90048311 90048312 90048313 90048314 90048315

Product Code AGHC06 AGHC08 AGHC10 AGHC13 AGHC16 AGHC20 AGHC22 – –

Clevis Unit Part Number Weight 100g 8230005 260g 90048308 740g 90048309 1.55kg 88900018 2.75kg 8230002 4.20kg 8230003 6.20kg 8230004 – – – –

595


Lifting Hooks & Chain Links

10

Lifting Hooks – Eye & Clevis Pin, Self-Locking

Lifting Hooks – Container Lifts

• Unique design offers ease of operation – when taking up the load it will lock into place without disturbing the load • Complies with AS3776 • Other sizes available on request

• Used to lift container by connecting to twistlock pockets • Available in straight configurations on request • Complies with AS3776

Eye

Clevis

Chain Dia. WLL

Unit Weight Product Code

Part Number

Product Code

Part Number

6mm

1.1t

500g

ASLHE06

90048291

ASLHC06

91250012

7 – 8mm

2.0t

840g

ASLHE07

90048292

ASLHC08

91250018

10mm

3.2t

1.5kg

ASLHE10

90048293

ASLHC10

91250011

13mm

5.3t

2.8kg

ASLHE13

90048294

ASLHC13

88895216

16mm

8.0t

5.4kg

ASLHE16

90048295

ASLHC16

90040438

Lifting Hooks – Eye Swivel, Self-Locking • Complies with AS3776 • Hook rotates when no load attached • Ball bearing model available on request

Product Code

Description

WLL

Part Number

CH-L CH-R

Left Right

12.5t 12.5t

90040191 90040192

Chain Links – Recessed Master Oblong • Most commonly used link, suitable for both single and double leg chain sling assemblies from 6 – 32mm • Capacities shown for double leg sling (only) are for WLL at 60° • Complies with AS3776

Product Code

Product Code

Chain Dia.

WLL

Unit Weight

Part Number

ASWSL08 ASWSL10 ASWSL13 ASWSL16

7 – 8mm 10mm 13mm 16mm

2.0t 3.2t 5.3t 8.0t

1.1kg 2.0kg 4.0kg 6.8kg

60017463 60017464 60017465 88892279

Lifting Hooks – Eye Swivel With Safety Latch • • • •

Chain Dia. – Double Leg 6mm 7mm 8mm 10mm 13mm 16mm 20mm 22mm 26mm

WLL

Unit Weight

Part Number

1.6t 2.2t 3.5t 5.5t 9.4t 14.2t 22.3t 33.5t 40.8t

340g 530g 860g 1.60kg 2.46kg 4.14kg 6.22kg 12.74kg 16.30kg

90048258 90048259 88896761 88889709 88900017 90048260 90048261 90048262 90040335

Chain Links – Connecting Hammer Lock

Comes with cast iron heavy duty safety latch, Complies with AS3776 Hook rotates when no load attached Ball bearing model available on request

• General connecting link used in the assembly of chain slings • Manufactured from G80 alloy steel with a safety factor of 4:1 • Complies with AS3776

Product Code

Chain Dia.

WLL

Unit Weight

Part Number

ASWH08 ASWH10 ASWH13 ASWH16

7 – 8mm 10mm 13mm 16mm

2.0t 3.2t 5.3t 8.0t

800g 1.50kg 2.46kg 5.29kg

88888226 91290072 90048297 90048298

Lifting Hooks – Clevis Pin With Safety Latch • Comes with cast iron safety latch for general purpose lifting • Complies with AS3776 • Other sizes available on request • Eye type available on request

596

AOL07 AOL08 AOL10 AOL13 AOL16 AOL20 AOL22 AOL26 AOL32

Chain Dia. – Single Leg 7mm 8mm 10mm 13mm 16mm 20mm 22mm 26mm 32mm

Product Code

Chain Dia.

WLL

Unit Weight

ACL06 ACL07 ACL08 ACL10 ACL13 ACL16 ACL20 ACL22 ACL26 ACL32

6mm 7mm 8mm 10mm 13mm 16mm 20mm 22mm 26mm 32mm

1.1t 1.5t 2.0t 3.2t 5.3t 8.0t 12.8t 16.0t 20.6t 31.5t

0.06kg 0.12kg 0.18kg 0.33kg 0.70kg 1.14kg 2.14kg 3.21kg 5.10kg 8.46kg

Part Number 8229001 8229002 8229003 8229004 8229005 8229006 8229007 8229008 8229009 8229010

Lifting & Spreader Beams – Extendable • Other WLL and sizes available on request • Complies with AS4991-2004

Product Code

Chain Dia.

WLL

Unit Weight

Part Number

ASHC06 ASHC08 ASHC10 ASHC13 ASHC16 ASHC20 ASHC22

6mm 7 – 8mm 10mm 13mm 16mm 20mm 22mm

1.1t 2.0t 3.2t 5.3t 8.0t 12.5t 15.0t

200g 500g 1.0kg 1.8kg 3.2kg 4.9kg 12.0kg

90048280 90048281 91250016 90048284 8230012 90048287 90048289

Product Code

WLL

2,100mm

2,600mm

3,100mm

3,600mm

Part Number

263822

As Lifting Beam As Spreader Beam

1.3t 8.6t

1.1t 8.6t

900kg 8.6t

800kg 8.6t

90048508

Product Code

WLL

2,650mm

3,050mm

3,450mm

3,850mm

Part Number

263926

As Lifting Beam As Spreader Beam

3.1t 15t

2.7t 15t

2.4t 15t

2.0t 15t

90048509

The little things, but not every thing. No matter what your thing, get it @ ATOM


Chain Lever Blocks

10

Chain Lever Blocks – With Overload Protection

CHAIN LEVER BLOCKS • Designed for lifting applications within industries such as engineering, construction, logging and mining • Mechanism and gears are enclosed in a robust all-steel compact shell • Every chain lever block is individually tested to its WLL and is supplied with a test certificate • All models include T-type hooks for improved load holding integrity • Complies with AS 1418.2 • 3 year warranty 91230000: • Compact and lightweight design for multi‑purpose applications and single hand operation

• All units come with built-in overload protection • Ideally suited to lifting applications in the mining, construction, engineering and logging industries • Mechanism and gears are enclosed in a robust all-steel compact shell • Individually tested to WLL and supplied with a test certificate • Lift height: 1.5m • Complies with AS1418.2 • Longer lift heights available on request

8429002

211671

WLL

Lift Height

Load Chain Size

Net Weight

Part Number

250kg 500kg 750kg 1.5t 3.0t 6.0t 9.0t

1.0m 1.5m 1.5m 1.5m 1.5m 1.5m 1.5m

4 x 12mm 5 x 15mm 10 x 30mm 10 x 30mm 10 x 30mm 10 x 30mm 10 x 30mm

2.2kg 6.0kg 7.0kg 11.0kg 18.0kg 30.0kg 47.0kg

91230000 8429003 8429001 8429002 8430001 8430002 91238015

Chain Lever Blocks

Product Code

WLL

Load Chain Size

Net Weight

Part Number

MLB080 MLB160 MLB320 MLB630

800kg 1.6t 3.2t 6.3t

6 x 18mm 8 x 24mm 10 x 30mm 10 x 30mm

7.9kg 10.9kg 14.4kg 35.0kg

211671 217543 216765 35000849

Chain Lever Blocks – With Overload Protection Option

• T-type hooks for improved load holding integrity (except for the 250kg WLL) • Double pawl safety springs to eliminate sticking • Cast hand wheel for added strength and durability • No aluminum content which ensures suitability for mining applications • Overall improved design and finish to prolong life expectancy • Lift height: 1.5m • Complies with AS1418.2 • 2 year warranty

• Fitted with patented non-slip knurled hook • Can be close coupled to Pacific girder trolleys to minimise headroom • Lift height: 1.5m • Custom lift heights and overload protection available • Feature the ‘free-wheeling’ braking system which enables fast and easy operation • Ideally suited for the ship building, construction, mining and power transmission industries • Complies with AS1418.2 and J.I.S

91238006 207798

Product Code

WLL

Load Chain

Lever Handle

Net Weight

Part Number

CLB102 CLB105 CLB108 CLB116 CLB132 CLB163

250kg 500kg 800kg 1.6t 3.2t 6.3t

4.0 x 12mm 5.0 x 15mm 5.6 x 17mm 7.1 x 21mm 10.0 x 28mm 10.0 x 28mm

168mm 253mm 273mm 378mm 418mm 418mm

2.4kg 3.7kg 7.0kg 10.0kg 20.0kg 31.0kg

207797 36000633 36000634 207798 36000635 36000636

Product Code

WLL

Load Chain Dia.

Net Weight

Part Number

VLB202 VLB205 VLB207 VLB210 VLB215 VLB230 VLB260 VLB290

250kg 500kg 800kg 1.0t 1.6t 3.2t 6.3t 9.0t

4.0mm x 1 5.0mm x 1 5.6mm x 1 6.3mm x 1 7.1mm x 1 9.0mm x 1 9.0mm x 2 9.0mm x 3

1.9kg 3.5kg 6.0kg 7.2kg 9.8kg 16.6kg 27.0kg 47.3kg

91238006 91238007 91238008 91238010 91238011 91238012 91238013 91238014

1800 999 024 | atom.com.au | getit@atom.com.au

597


Chain Blocks

10

Chain Blocks – With Overload Protection

CHAIN BLOCKS – WITH OVERLOAD PROTECTION

• All units come with built-in overload protection • Ideally suited to lifting applications in the mining, construction, engineering and logging industries • Proven design features to ensure full protection of the vital gears, shafts and bearings • Individually tested to WLL and supplied with a test certificate • Complies with AS1418.2 • Longer lifts available on request • Calibrated load and hand chain to suit available on request

• Designed for lifting applications within industries such as engineering, construction, logging and mining • Bearings, gears and shafts are fully protected by innovative design features • Every chain block is individually tested to its WLL and supplied with a test certificate • Complies with AS1418.2 • 3 year warranty

232304 8427002

WLL

Lift Height

Load Chain Size

Net Weight

Part Number

500kg 500kg 1.0t 1.0t 1.5t 2.0t 2.0t 3.0t 3.0t 5.0t 5.0t 10.0t

3m 6m 3m 6m 3m 3m 6m 3m 6m 3m 6m 6m

5 x 15mm 5 x 15mm 6 x 18mm 6 x 18mm 7 x 21mm 10 x 30mm 10 x 30mm 8 x 24mm 8 x 24mm 10 x 30mm 10 x 30mm 10 x 30mm

9.0kg 13.5kg 12.0kg 17.0kg 18.0kg 19.5kg 26.0kg 25.0kg 36.0kg 42.0kg 59.0kg 91.0kg

8426001 91228067 8426002 88821134 91228069 8426003 88820090 8427001 88893952 8427002 88809840 91220029

Product Code

WLL

Lift Height

Load Chain Size Net Weight

Part Number

MCB0053OL MCB0056OL MCB013OL MCB016OL MCB023OL MCB026OL MCB033OL MCB036OL MCB053OL MCB056OL MCB103OL MCB106OL MCB206OL MCB306OL

500kg 500kg 1t 1t 2t 2t 3t 3t 5t 5t 10t 10t 20t 30t

3m 6m 3m 6m 3m 6m 3m 6m 3m 6m 3m 6m 6m 6m

5 x 15mm 5 x 15mm 6 x 18mm 6 x 18mm 10 x 30mm 10 x 30mm 8 x 24mm 8 x 24mm 10 x 30mm 10 x 30mm 10 x 30mm 10 x 30mm 10 x 30mm 10 x 30mm

35000847 232304 232539 172551 216769 223657 239049 232402 216770 223645 35000848 170589 91228073 91228074

9.5kg 14.2kg 12.5kg 18.0kg 21.0kg 28.5kg 25.0kg 35.0kg 41.0kg 55.0kg 82.0kg 107.0kg 244.0kg 490.0kg

Chain Blocks – Underground Compliant

Chain Blocks • Heavy duty chain blocks, suitable for many lifting applications in the industrial, rural, construction and mining industries • Fitted with patented non-slip knurled hook • Can be close coupled to Pacific girder trolleys to minimise headroom • Manufactured using optimum high quality steel which conforms to the strict ISO regulations • Lift height: 3m • Complies with AS1418.2 and JIS • Custom height of lift available on request

• Encapsulated needle bearings and side plate bearings for smoother operation • Key internal components are CNC machined before being heat-treated and toughened • No aluminium content – suitable for mining applications • Complies with AS1418.2 • 2 year warranty

91228052

598

36000619

Product Code

Model

WLL

Headroom

Net Weight

Part Number

Product Code

WLL

Lift Height

Net Weight

Part Number

VCB050/3 VCB100/3 VCB150/3 VCB200/3 VCB300/3 VCB500/3 VCB750/3 VCB910/3 VCB915/3 VCB920/3

05VH5 10VH5 15VH5 20VH5 30VH5 50VH5 75VH5 90VH5 92VH5 93VH5

500kg 1.0t 1.5t 2.0t 3.0t 5.0t 7.5t 10.0t 15.0t 20.0t

305mm 345mm 370mm 425mm 505mm 635mm 740mm 760mm 850mm 870mm

8.6kg 11.5kg 13.8kg 21.6kg 23.0kg 41.0kg 60.5kg 78.0kg 150.0kg 190.0kg

91228051 91228052 91228053 91228054 91228055 91228056 91228057 91220022 91228059 91228060

CCB103 CCB106 CCB113 CCB116 CCB123 CCB126 CCB133 CCB136 CCB153 CCB156

500kg 500kg 1t 1t 2t 2t 3t 3t 5t 5t

3m 6m 3m 6m 3m 6m 3m 6m 3m 6m

9kg 10kg 12kg 16kg 20kg 25kg 23kg 29kg 39kg 50kg

36000614 250991 36000615 250990 36000616 36000617 36000618 36000619 36000620 36000621

The little things, but not every thing. No matter what your thing, get it @ ATOM


Chain Hoists – Electric & Air Chain Hoists – Electric

Chain Hoist – Electric, Portable

• Fully enclosed construction to withstand harsh operating conditions • DC motor brake with 2-side single brake, electro magnetic brake actuates synchronously in the event of power failure to ensure safe operation while loading • 2 in 1 design – dual function of mechanical brake and overload protection • Built-in heat protector • 5-pocket chain sprocket of load chain for smooth operation • 3 phase 415V with 24V control • Complies with AS1418.2 • 2 year warranty • Optional cordless radio remote control available on request • Motorised trolley available on request

• Comes in convenient durable travel case providing an ideal portable solution • Compact, lightweight • Dual speeds with variable speed slow control for raising and lowering • Duty cycle rated at 30% ED with 180 starts/hour • Overload protection clutch • IP65 18V 5m pendant control • Chain bucket and 3m power supply cable included • Single phase • Power: 240V, 50Hz • Lift height: 6m • Complies with AS1418.2 • Optional cordless radio remote control available on request

175841

36000623

3m Lift Height

6m Lift Height

Product Code

WLL

Part Number

Product Code

WLL

Part Number

Product Code

WLL

Motor

Speed

Part Number

CEH025 CEH050 CEH100 CEH200

250kg 500kg 1t 2t

258822 36000623 36000625 36000627

CEH026 CEH055 CEH105 CEH205

250kg 500kg 1t 2t

36000622 36000624 36000626 36000628

PPH080 PPH125 PPH240 PPH500

80kg 125kg 250kg 500kg

300W 300W 600W 600W

0 – 4.8m/18min 0 – 3.2m/12.5min 0 – 3.2m/12.5min 0 – 1.6m/6.3min

219492 175841 36000645 220500

Chain Hoists – Electric

Chain Hoists – Air, Flameproof

• Provides quality, reliability and performance • Comes standard with overload limiter, electromagnetic braking • 24V pendant and chain bucket • 3 phase unit or single phase (up to 2t WLL) • Single speed • Power: 415V, 50Hz • Lift height: 3m • Complies with AS1418.2 • Also available in dual speed POA • Optional cordless radio remote control available on request • Motorised trolleys available on request • Hitachi engine

• Low maintenance design delivers 100% duty cycle in all environmental conditions • Only six atmospheres of compressed air required • Immune to dust, mud, dirt, grit, heat, vapours etc. • Self-cooling pneumatic motor will not overheat • Fail-safe brake in case of air supply failure • Ideal for use in mines, chemical plants and paint shops • Patented pre-lube motor design for low maintenance, oil-free operation • Available with push, geared or air trolley • Cord or pendant control and other lift heights available

92368152

91228020 Product Code

Single Speed Models

WLL

Motor

Speed

Part Number

Product Code

WLL

Air Pressure

Lowering Speed At Full Load

Part Number

HEH010 HEH050 HEH100 HEH200 HEH110 HEH210 HEH300 HEH500

⁄4S 1 ⁄2S 1S 2S 1F 2F 3F 5F

250kg 500kg 1t 2t 1t 2t 3t 5t

450W 630W 800W 800W 1.3kW 2.4kW 2.4kW 2.4kW

10.0m/min 7.2m/min 4.6m/min 2.3m/min 7.1m/min 6.8m/min 4.1m/min 2.8m/min

91228018 91220032 91228020 91228022 91228021 91228023 91228024 91228025

JDN705 JDN706 JDN715 JDN719 JDN725 JDN735 JDN732 JDN765

250kg 500kg 1.0t 1.6t 2.0t 3.2t 3.2t 6.3t

6bar 6bar 6bar 4 – 6bar 6bar 6bar 4 – 6bar 6bar

38m/min 17m/min 11m/min 11 – 12m/min 5.5m/min 10.8m/min 5.5 – 6m/min 5.4m/min

36000642 92368146 92368152 36000643 92368156 92368159 36000644 92368160

1

10

1800 999 024 | atom.com.au | getit@atom.com.au

599


Winches, Girder Clamps & Trolleys & Plate Clamps

10

Winches – Brake

Girder Trolleys – Push

• Positive Weston-style brake will hold load in any position • Compact, lightweight and rugged construction • Mechanical components enclosed for protection and safety through one-piece designed frame • High precision construction minimises gear noise • Complies with AS1418.2 • 2 year warranty

• Anti-drop plates are installed as a standard feature • Complies with AS1418.2

Product Code

Pulling Capacity

Lifting Capacity

Part Number

CBW080 CBW120 CBW180 CBW260

370kg 545kg 820kg 1.2t

180kg 270kg 410kg 600kg

36003329 36003330 36003331 36003332

Product Code

WLL

Beam Width

Curve Radius

Net Weight

Part Number

MPGT005 MPGT010 MPGT020 MPGT030 MPGT050 MPGT100 MPGT200

500kg 1t 2t 3t 5t 10t 20t

50 – 305mm 64 – 305mm 88 – 305mm 100 – 305mm 114 – 305mm 124 – 305mm 136 – 305mm

1.0m 1.0m 1.3m 1.3m 1.4m 3.5m 3.5m

11.5kg 11.5kg 19.0kg 28.0kg 28.0kg 89.0kg 168.0kg

88895786 8425001 8425002 8425004 8428002 91190015 91198011

Winches – Creeper, Lever Type, Wire Rope

Girder Trolleys – Geared

• A versatile, portable and compact hand winch for pulling, lifting, lowering, spanning, 4WD recovery and securing loads over large distances • Lightweight, high strength aluminium alloy housing and is easy to operate, maintain and service • Supplied with operating lever and 20m of wire rope mounted on a reel for all models • Complies with AS1418.2

• Available in standard execution with 2.5m of hand chain and can be supplied as an extra for additional length • Complies with AS1418.2 • Close headroom push and geared girder trolleys available on request

Product Code WRP080 WRP160 WRP320

Rated Pulling Capacity 1.25t 2.50t 5.00t

Rated Lifting Capacity 0.8t 1.6t 3.2t

Wire Rope Dia. 8.3mm 11mm 16mm

Unit Weight With Rope 7.5kg 12.0kg 25.3kg

Part Number 91408062 91408063 91408064

Winches – Electric • Lightweight and compact design • Electromagnetic fail-safe brake designed for both static and dynamic loading, applies automatically in the event of power loss • Compact load sharing design of the heat‑treated planetary gear ensures quiet operation and long life • Features emergency stop function switch • Low volt 24V x 3m pendant control • 240V single phase, 50Hz • Optional cordless radio remote control available on request

Product Code

WLL

Test Load

Beam Width

Curve Radius

Net Weight

Part Number

MGGT010 MGGT020 MGGT030 MGGT050 MGGT100 MGGT200 MGGT300

1t 2t 3t 5t 10t 20t 30t

1.5t 3.0t 4.5t 7.5t 15.0t 25.0t 35.0t

64 – 203mm 88 – 203mm 100 – 305mm 114 – 305mm 124 – 305mm 136 – 305mm 175 – 305mm

1.0m 1.1m 1.3m 1.4m 2.5m 4.5m 4.5m

18kg 27kg 43kg 60kg 103kg 256kg 260kg

91198012 91198013 91198014 91198015 91198016 91198017 91198018

Girder Clamps • Combined integral push trolley and girder clamp also available on request • Complies with AS1418.2

Product Code

WLL

Beam Width

Part Number

MGC010 MGC020 MGC030 MGC050 MGC100

1t 2t 3t 5t 10t

75 – 230mm 75 – 230mm 80 – 320mm 90 – 320mm 90 – 320mm

91190016 91190000 91190001 91190010 91190011

Plate Clamps – Horizontal • Constructed from high grade alloy steel • Must be used in pairs • Sold per pair

600

Product Code

WLL

Lift Height

Lift Speed

Part Number

ACW200 ACW250 ACW300 ACW305 ACW306 ACW310

200kg 250kg 300kg 500kg 500kg 750kg

29m 29m 29m 58m 58m 58m

10 – 15m/min 10 – 15m/min 10 – 15m/min 10 – 15m/min 12 – 18m/min 10 – 15m/min

91408002 91408003 91408004 60015152 36000613 60015153

Product Code

WLL Per Pair

Jaw Openings

Part Number

MHPC150 MHPC300 MHPC500

1.5t 3.0t 5.0t

0 – 60mm 0 – 60mm 0 – 60mm

91410002 91410008 91410009

The little things, but not every thing. No matter what your thing, get it @ ATOM


Plate Clamps, Snatch Blocks, Lifting Tongs & Lifting Shackles Plate Clamps – Vertical

10

Lifting Shackles – Alloy Grade ‘S’, Dee, Screw

• All steel construction • Fitted with safety lock to provide initial pressure at near zero grip • Other sizes up to 20t available on request

• Screw pin dee shackles • Easily identifiable by blue pin • Individually stamped with the working load limit (WLL) in tonnes; month/year of manufacture; S/6 to indicate grade of shackle • Used in various lifting applications in conjunction with chain, wire rope, synthetic slings and more • Complies with AS2741

Product Code

WLL

Jaw Openings

Part Number

MVPC10 MVPC20 MVPC30

1t 2t 3t

0 – 22mm 0 – 40mm 0 – 50mm

8420002 8420003 88890324

Plate Clamps – Universal • Compact design and lightweight, these clamps are fitted with a universal lifting eye for movement in all directions • Fitted with safety lock to provide initial pressure at near zero grip • Other sizes up to 12t available on request

Product Code

Size

WLL

Part Number

SD0608 SD0810 SD1011 SD1113 SD1316 SD1619 SD1922 SD2225 SD2529 SD2932 SD3235

6 x 8mm 8 x 10mm 10 x 11mm 11 x 13mm 13 x 16mm 16 x 19mm 19 x 22mm 22 x 25mm 25 x 29mm 29 x 32mm 32 x 35mm

500kg 750kg 1.0t 1.5t 2.0t 3.2t 4.7t 6.5t 8.5t 9.5t 12.0t

8221002 8221003 8221004 8221005 8221006 8222001 8222002 8222003 8222004 91268097 91260087

Lifting Shackles – Alloy Grade ‘S’, Bow, Screw Product Code

WLL

Jaw Openings

Part Number

MUPC005 MUPC075 MUPC010 MUPC020

500kg 750kg 1t 2t

0 – 15mm 0 – 14mm 0 – 20mm 0 – 25mm

91298094 91298095 91298096 91290084

• Screw pin bow shackles • Easily identifiable by blue pin • Individually stamped with the working load limit (WLL) in tonnes; month/year of manufacture; S/6 to indicate grade of shackle • Used in various lifting applications in conjunction with chain, wire rope, synthetic slings and more • Complies with AS2741

Snatch Blocks – Swivel, Shackle Head • • • • • •

Forged steel Heavy duty construction Fitted with grease nipples Swivel shackle head fitting Complies with AS2089 50t model available on request

Product Code WLL

Dia.

Part Number

Product Code WLL

Dia.

Part Number

BS2T BS4T BS8T BS10T

75mm 150mm 200mm 250mm

91240002 8234004 8235002 36001135

BS12T BS15T BS22T BS30T

250mm 300mm 355mm 500mm

8235003 36001136 36001137 36001138

2t 4t 8t 10t

Lifting Tongs – Railway Line 263150R • WLL: 1.5t • Max. jaw opening: 80mm • Weight: 7.5kg

12t 15t 22t 30t

Product Code

Size

WLL

Part Number

SB0506 SB0608 SB0810 SB1011 SB1113 SB1316 SB1619 SB1922 SB2225 SB2529 SB2932 SB3235 SB3538 SB3841 SB4451 SB5157

5 x 6mm 6 x 8mm 8 x 10mm 10 x 11mm 11 x 13mm 13 x 16mm 16 x 19mm 19 x 22mm 22 x 25mm 25 x 29mm 29 x 32mm 32 x 35mm 35 x 38mm 38 x 41mm 44 x 51mm 51 x 57mm

330kg 500kg 750kg 1.0t 1.5t 2.0t 3.2t 4.7t 6.5t 8.5t 9.5t 12.0t 13.5t 17.0t 25.0t 35.0t

8213001 8213002 8213003 8213004 8213005 8213006 8214001 8214002 8214003 8214004 8215001 8215002 8215003 8216001 91268108 8217001

Don’t need a lifting rated shackle? Check out the general snap hooks, rings, D-bolts and more from page 756

91290046

1800 999 024 | atom.com.au | getit@atom.com.au

601


Lifting Shackles & Eye Bolts

10

Lifting Shackles – Alloy Grade ‘S’, Bow, Pin

Lifting Eye Bolts – Metric, Rotating

• Safety pin bow shackles • Easily identifiable by blue pin • Individually stamped with the working load limit (WLL) in tonnes; month/year of manufacture; S/6 to indicate grade of shackle • Used in various lifting applications in conjunction with chain, wire rope, synthetic slings and more • Complies with AS2741

• • • •

K

VRS-F starpoint Metric coarse thread 360° rotation Stamped with F2 WLL

F1 D F2

L Product Code Size

WLL

Part Number

SSB1316 SSB1619 SSB1922 SSB2225 SSB2529 SSB2932 SSB3235 SSB3538 SSB4451 SSB5157 SSB6370 SSB7076

2.0t 3.2t 4.7t 6.5t 8.5t 9.5t 12.0t 13.5t 25.0t 35.0t 55.0t 85.0t

91260068 91260000 91260040 91260041 91260033 91260072 91260081 91260073 91260089 91260088 91260092 60017462

13 x 16mm 16 x 19mm 19 x 22mm 22 x 25mm 25 x 29mm 29 x 32mm 32 x 35mm 35 x 38mm 44 x 51mm 51 x 57mm 64 x 70mm 75 x 80mm

Shackles – Commercial Grade, Dee, Screw • Used in domestic, mining and any other industrial applications • Comes with screw pin • Made from hot dipped galvanised mild steel • Not for lifting applications • B: inside diameter • D: pin diameter • D1: body diameter • C: bow width

Product Code

WLL F1

WLL F2

D (mm)

K (mm)

L (mm)

Weight

Part Number

VRS-F-M8 VRS-F-M10 VRS-F-M12 VRS-F-M16 VRS-F-M20 VRS-F-M24 VRS-F-M30 VRS-F-M36 VRS-F-M42 VRS-F-M48

1t 1t 2t 4t 6t 8t 12t 16t 24t 32t

400kg 400kg 750kg 1.5t 2.3t 3.2t 4.5t 7.0t 9.0t 12.0t

25 25 30 35 40 48 60 72 82 94

47 47 56 65 75 90 112 135 158 180

12 15 18 24 30 36 45 54 63 72

100g 100g 200g 300g 500g 900g 1.7kg 2.9kg 4.6kg 7.0kg

91268026 91268027 91268028 91268029 91268030 91268031 91268032 91268033 91268034 91268035

Lifting Eye Bolts – UNC, Rotating • • • •

D

K

VRS-F starpoint UNC thread 360° rotation Stamped with F2 WLL

F1 D F2

C L

D1 B

Product Code

Size

B

D

D1

C

Weight

Part Number

SC05

5mm

10mm

5mm

5mm

19mm

150g

8219002

SC06

6mm

12mm

6mm

6mm

24mm

250g

8219003

SC08

8mm

16mm

8mm

8mm

32mm

540g

8219004

SC10

10mm

20mm

10mm

10mm

40mm

109g

8219005

SC12

13mm

25mm

13mm

13mm

48mm

205g

8219006

SC16

16mm

32mm

16mm

16mm

64mm

480g

8220001

SC22

22mm

44mm

22mm

22mm

85mm

1.285kg

8220003

SC25

25mm

25mm

25mm

25mm

95mm

1.866kg

8220004

Shackles – Commercial Grade, Bow, Screw

Product Code

WLL F1

WLL F2

D (mm)

K (mm)

L (mm)

Weight

Part Number

VRS-F-3/8” VRS-F-1/2” VRS-F-5/8” VRS-F-3/4” VRS-F-7/8” VRS-F-1” VRS-F-1 1/4” VRS-F-1 1/2” VRS-F-1 3/4” VRS-F-2”

1t 1t 2t 4t 6t 8t 12t 16t 24t 32t

400kg 400kg 750kg 1.5t 2.3t 3.2t 4.5t 7.0t 9.0t 12.0t

25 30 35 40 40 48 60 72 82 94

47 56 65 75 75 90 112 135 158 180

15 18 24 30 32 36 45 54 63 72

100g 200g 300g 500g 600g 900g 1.7kg 2.9kg 4.6kg 7.0kg

60019705 60019706 60019707 60019708 60019709 60019710 60019711 60019712 60019713 60019714

Lifting Eye Bolts – Metric, Grade 8 • Metric range from M6 through to M24 • UNC and BSW range available from 3⁄8” – 1” • Customisation available on request including other thread forms and long shanks

• Used in domestic, mining and many other industrial applications • Made from hot dipped galvanised mild steel material • Comes with screw pin • Not for lifting applications • B: inside diameter • D: pin diameter • D1: body diameter • C: bow width

D

C

D1 B

602

Product Code

Size

B

D

D1

C

Weight

Part Number

SCB08

8mm

16mm

8mm

8mm

24mm

700g

91260012

SCB10

10mm

20mm

10mm

10mm

30mm

140g

91260013

SCB13

13mm

25mm

13mm

13mm

39mm

250g

91260015

SCB16

16mm

32mm

16mm

16mm

48mm

550g

91260016

SCB20

20mm

44mm

22mm

22mm

85mm

1.35kg

91260017

SCB25

25mm

50mm

25mm

25mm

100mm

2.05kg

91260019

Product Code HTEB08 HTEB10 HTEB12 HTEB16 HTEB20 HTEB24

AØ M08 M10 M12 M16 M20 M24

WLL F1 (t) 0.80 1.00 1.60 4.00 6.00 8.00

WLL F2 (t) 0.20 0.25 0.40 1.00 1.60 2.50

Thread Pitch 1.25 1.50 1.75 2.00 2.50 3.00

BØ (mm) 27 27 27 34 41 50

C (mm) 30 30 30 34 40 50

DØ (mm) 12 12 12 15 17 20

The little things, but not every thing. No matter what your thing, get it @ ATOM

E (mm) 48 48 48 56 70 85

G (mm) 10 10 10 14 16 18

L (mm) 21 21 21 28 35 42

Part Number 36000751 36000752 36000753 36000754 36000755 36000756


Eye Bolts, Ring Bolts & Eye Nuts Lifting Eye Bolts – Metric & UNC, Grade 10, Swivel

Lifting Eye Nuts – Metric & Imperial, Collared

• • • • • •

• • • •

Forged from high tensile alloy steel Tempered 100% electromagnetic crack testing to AS1171 Hi-vis powder coating complies with AS4506 Longer shanks available BSW and fine series threads are also available on request

10

Metric range from M6 through to M80 UNC and BSW range available from 3⁄8” – 3” Complies with AS2317 Customisation available on request

Metric Product Code

WLL F1

WLL F2

TSEB08 TSEB10 TSEB12 TSEB16 TSEB20 TSEB24 TSEB30 TSEB36 TSEB42 TSEB48 UNC

M8 M10 M12 M16 M20 M24 M30 M36 M42 M48

1t 1t 2t 4t 6t 8t 12t 16t 24t 32t

300kg 400kg 750kg 1.5t 2.3t 3.2t 4.5t 7.0t 9.0t 12.0t

Product Code

WLL F1

WLL F2

TSEBU375 TSEBU500 TSEBU625 TSEBU750 TSEBU875 TSEBU1000 TSEBU1250 TSEBU1500

⁄8” ⁄2” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄4” 11⁄2”

1t 2t 4t 6t 7t 8t 12t 16t

400kg 750kg 1.5t 2.3t 2.3t 3.2t 4.5t 7.0t

3 1

Thread Pitch 1.25 1.50 1.75 2.00 2.50 3.00 3.50 4.00 4.50 5.00 Threads Per Inch 16.00 13.00 11.00 10.00 9.00 8.00 7.00 6.00

C (mm)

L (mm)

Part Number

30 30 30 34 39 50 60 70 95 95

12 15 18 24 30 36 45 54 63 72

36000757 36000758 36000759 36000760 36000761 36000762 36000763 36000764 36000765 36000766

C (mm)

L (mm)

Part Number

30 30 34 39 39 50 60 70

15 18 24 30 33 36 45 54

36000767 36000768 36000769 36000770 36000771 36000772 36000773 36000774

Lifting Ring Bolts – Metric & UNC, Rotating • • • •

Metric coarse thread 360° rotation Longer bolts available upon request Also available in UNC

C T

H

Product Code

WLL

C

H

T

Weight

Part Number

VLBG-PLUS-0.63t-M8 VLBG-PLUS-0.9t-M10 VLBG-PLUS-1.35t-M12 VLBG-PLUS-2t-M16 VLBG-PLUS-3.5t-M20 VLBG-PLUS-4.5t-M24 VLBG-PLUS-6.7t-M30 VLBG-7t-M36 VLBG-8t-M36 VLBG-10t-M42 VLBG-15t-M42 VLBG-20t-M48

0.63t 0.90t 1.35t 2.00t 3.50t 4.50t 6.70t 7.00t 8.00t 10.00t 15.00t 20.00t

34mm 34mm 34mm 36mm 54mm 54mm 65mm 65mm 82mm 82mm 100mm 100mm

11mm 15mm 18mm 22mm 32mm 37mm 49mm 52mm 63mm 73mm 63mm 73mm

75mm 75mm 75mm 85mm 110mm 125mm 147mm 146mm 197mm 197mm 222mm 222mm

0.30kg 0.32kg 0.33kg 0.55kg 1.30kg 1.50kg 3.30kg 3.40kg 6.20kg 6.70kg 11.20kg 11.60kg

30008274 30008275 30008276 273922 30008277 30008278 30008279 90040195 91268020 91268021 91268022 91268023

Product Code Metric Coarse ENMC10 ENMC12 ENMC16 ENMC20 ENMC22 ENMC24 ENMC30 ENMC33 ENMC36 ENMC42 ENMC48 ENMC56 ENMC64 ENMC76 Product Code Imperial UNC ENU312 ENU375 ENU500 ENU625 ENU750 ENU875 ENU1000 ENU1125 ENU1250 ENU1500 ENU1750 ENU2000 ENU2250 ENU2500 ENU3000 Imperial BSW ENW375 ENW500 ENW625 ENW750 ENW875 ENW1000 ENW1125 ENW1250 ENW1500 ENW1750 ENW2000 ENW2250 ENW2500 ENW3000

AØ (mm)

WLL (t)

Thread Pitch

BØ (mm)

C (mm)

DØ (mm)

E (mm)

M10 M12 M16 M20 M22 M24 M30 M33 M36 M42 M48 M56 M64 M76 AØ (mm)

0.25 0.40 0.80 1.60 2.00 2.50 4.00 5.00 7.00 8.00 10.00 15.00 20.00 30.00 WLL (t)

1.50 1.75 2.00 2.50 2.50 3.00 3.50 3.50 4.00 4.50 5.00 5.50 6.00 6.00 Threads Per Inch

28 28 34 44 50 57 71 71 87 102 115 143 143 163 BØ (mm)

24 24 28 32 33 38 48 48 53 66 72 95 95 106 C (mm)

11 11 16 20 20 22 27 27 35 40 49 56 56 66 DØ (mm)

25 25 40 44 44 51 65 65 73 90 99 124 124 140 E (mm)

⁄16” ⁄8” 1 ⁄2” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄8” 11⁄4” 11⁄2” 13⁄4” 2” 21⁄4” 21⁄2” 3”

– 0.25 0.40 0.80 1.60 2.00 2.50 4.00 5.00 7.00 8.00 10.00 15.00 20.00 30.00

18.0 16.0 13.0 11.0 10.0 9.0 8.0 7.0 7.0 6.0 5.0 4.5 4.0 4.0 3.5

28 28 28 34 44 50 57 71 71 87 102 115 143 143 163

24 24 24 28 32 33 38 48 48 53 66 72 95 95 106

11 11 11 16 20 20 22 27 27 35 40 49 56 56 66

25 25 25 40 44 44 51 65 65 73 90 99 124 124 140

232229 33600084 33600085 33600086 33600087 33600088 33600075 33600076 33600077 33600078 33600079 33600080 33600081 33600082 33600083

⁄8” ⁄2” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄8” 11⁄4” 11⁄2” 13⁄4” 2” 21⁄4” 21⁄2” 3”

0.25 0.40 0.80 1.60 2.00 2.50 4.00 5.00 7.00 8.00 10.00 15.00 20.00 30.00

16.0 12.0 11.0 10.0 9.0 8.0 7.0 7.0 6.0 5.0 4.5 4.0 4.0 3.5

28 28 34 44 50 57 71 71 87 102 115 143 143 163

24 24 28 32 33 38 48 48 53 66 72 95 95 106

11 11 16 20 20 22 27 27 35 40 49 56 56 66

25 25 40 44 44 51 65 65 73 90 99 124 124 140

33600098 33600099 33600100 33600101 33600102 33600089 33600090 33600091 33600092 33600093 33600094 33600095 33600096 33600097

5 3

3 1

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number 33600061 33600062 33600063 33600064 33600065 33600066 33600067 33600068 33600069 33600070 33600071 33600072 33600073 33600074 Part Number

603


Eye Nuts & Load Rings

10

Lifting Eye Nuts – Metric, Shouldered

Lifting Load Rings & Welding Lugs – Without Spring

• Gold zinc finish • Proof tested to 2 x WLL and minimum breakforce of 6 x WLL • Test certificates available on request • DIN582

• Multi-directional loading • Forged alloy steel load ring • Ready for welding

F C E

Product Code

Size

WLL F2

Part Number

CEN08 CEN10 CEN12 CEN16 CEN20 CEN24

8mm 10mm 12mm 16mm 20mm 24mm

140kg 230kg 340kg 700kg 1.2t 1.8t

8201004 8201006 8201008 8201010 8201012 8201014

Lifting Eye Nuts – Metric, UNC & BSW, Grade 8 • Metric range from M8 through to M24 • UNC and BSW range available from 3⁄8” to 1” • Customisation on other thread forms available on request

Product Code HTEN08 HTEN10 HTEN12 HTEN16 HTEN20 HTEN24

WLL F1 0.8t 1.0t 1.6t 4.0t 6.0t 8.0t

AØ M8 M10 M12 M16 M20 M24

WLL F2 0.20t 0.25t 0.40t 1.00t 1.60t 2.50t

Thread Pitch 1.25 1.50 1.75 2.00 2.50 3.00

C (mm) 30 30 30 34 40 50

BØ (mm) 27 27 27 34 41 50

DØ (mm) 12 12 12 15 17 20

Product Code

WLL

C

E

F

Weight

Part Number

VLBS(W/S)-1.5 VLBS(W/S)-2.5 VLBS(W/S)-4 VLBS(W/S)-6.7 VLBS(W/S)-10 VLBS(W/S)-16

1.5t 2.5t 4.0t 6.7t 10.0t 16.0t

38mm 45mm 51mm 67mm 67mm 100mm

40mm 48mm 52mm 73mm 71mm 105mm

13.5mm 13.5mm 16.5mm 22.5mm 26.5mm 26.0mm

350g 500g 800g 1.9kg 2.9kg 6.8kg

90048021 60019704 90048022 90048023 90048024 90048025

Lifting Load Rings & Welding Lugs – Without Spring

E (mm) 48 48 48 56 70 85

G (mm) 10 10 10 14 16 18

Part Number

Load Ring: • High tensile alloy steel • Hardened and tempered • Powder coated finish • Manufactured exclusively from Australian made steel • Complies with AS3776 Welding Lug: • Forged from G300 mild steel – AS3679.1 grade 300PLUS • Ready for welding • Weld procedure included

36000775 36000776 210817 36000777 36000778 36000779 Product Code WLL

Lifting Eye Nuts – Metric, UNC & BSW, Grade 10, Swivel • • • •

TWLP250 TWLP400 TWLP670 TWLP1000 TWLP1600

Forged from high tensile alloy steel Tempered 100% electromagnetic crack testing to AS1171 Hi-vis powder coating complies with AS4506

2.5t 4.0t 6.7t 10.0t 16.0t

AØ (mm) 40 53 68 70 102

B (mm) 82 104 138 140 210

C (mm) 34 46 60 60 92

D (mm) 68 90 116 130 192

E (mm) 28 33 45 57 70

F (mm) 14 18 23 26 38

G (mm) 14 18 23 26 30

H (mm) 92 116 155 170 240

Part Number 33600305 33600306 33600307 33600303 33600304

Lifting Load Rings & Welding Lugs – With Spring • Multi-directional loading • Forged alloy steel load ring • Protected spring keeps the ring bracket in required position without tipping and reduces vibration induced noise • Ready for welding

C

F

E

604

Product Code A Ø

WLL F1

WLL F2

Thread Pitch C (mm)

H (mm)

Part Number

TSEN08 TSEN10 TSEN12 TSEN16 TSEN20 TSEN24 TSEN30 TSEN36 TSEN42 TSEN48

1t 1t 2t 4t 6t 8t 12t 16t 24t 32t

0.30t 0.40t 0.75t 1.50t 2.30t 3.20t 4.50t 7.00t 9.00t 12.00t

1.25 1.50 1.75 2.00 2.50 3.00 3.50 4.00 4.50 5.00

19 19 19 21 24 28 32 37 45 45

36000780 36000781 36000782 36000783 36000784 36000785 36000786 36000787 36000788 36000789

M8 M10 M12 M16 M20 M24 M30 M36 M42 M48

30 30 30 34 39 50 60 70 95 95

Product Code

WLL

C

E

F

Weight

Part Number

VLBS-1.5 VLBS-2.5 VLBS-4 VLBS-6.7 VLBS-10

1.5t 2.5t 4.0t 6.7t 10.0t

38mm 45mm 51mm 67mm 67mm

40mm 48mm 52mm 73mm 71mm

13.5mm 13.5mm 16.5mm 22.5mm 26.5mm

350g 500g 800g 1.90kg 2.90kg

91268125 60019702 91268126 91268127 60019703

The little things, but not every thing. No matter what your thing, get it @ ATOM


Eye Bolts Lifting Eye Bolts – Metric, Shouldered

Lifting Eye Bolts – Imperial, Collared

• Gold zinc finish • Proof tested to 2 x WLL and minimum breakforce of 6 x WLL • Test certificates available on request • DIN580

• Available in BSW and UNC threads

Product Code CEB08 CEB10 CEB12 CEB16 CEB20

Size

WLL F2

Part Number

8mm 10mm 12mm 16mm 20mm

150kg 250kg 400kg 800kg 1.6t

8201003 8201005 8201007 8201009 8201011

Product Code CEB22 CEB24 CEB30 CEB36 CEB48

Size

WLL F2

Part Number

22mm 24mm 30mm 36mm 48mm

1.6t 2.5t 3.6t 5.1t 8.6t

91260035 8201013 88898713 91260082 215136

Lifting Eye Bolts – Metric, Collared • • • •

Metric range M6 – M80 Coarse and fine thread Complies with AS2317 Customisation available on request

Product Code Coarse EBMC06 EBMC08 EBMC10 EBMC12 EBMC14 EBMC16 EBMC18 EBMC20 EBMC22 EBMC24 EBMC27 EBMC30 EBMC33 EBMC36 EBMC39 EBMC42 EBMC48 EBMC56 EBMC64 EBMC68 EBMC72 EBMC76 EBMC80

WLL (t)

Thread B Ø Pitch (mm)

C (mm)

DØ (mm)

E (mm)

F (mm)

Part Number

M06 M08 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M48 M56 M64 M68 M72 M76 M80

– – 0.25 0.40 0.40 0.80 0.80 1.60 2.00 2.50 3.00 4.00 5.00 6.30 7.00 8.00 10.00 15.00 20.00 20.00 25.00 30.00 30.00

1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 5.00 5.50 6.00 6.00 6.00 6.00 6.00

14 14 14 18 23 23 30 30 32 38 49 49 49 53 53 66 75 97 97 106 106 106 106

9 9 9 11 14 14 16 16 20 22 27 27 27 35 35 40 49 56 56 66 66 66 66

19 19 19 24 31 31 35 35 41 48 65 65 65 73 73 90 99 124 124 140 140 140 140

17 17 17 21 27 27 38 38 41 42 52 52 52 64 64 76 89 116 116 125 125 125 125

229863 79917967 33600002 33600003 33600004 33600005 33600006 33600007 33600008 33600009 237946 33600010 33600011 91260009 33600013 33600014 33600015 33600016 33600017 235808 33600018 33600019 36000750

M10 M12 M16 M20 M22 M24 M30 M33 M36 M39 M42 M48 M56 M64 M76

0.25 0.40 0.80 1.60 2.00 2.50 4.00 5.00 6.30 7.00 8.00 10.00 15.00 20.00 30.00

WLL

Thread

Part Number

CEB1/2U CEB5/8 CEB34U CEB3/4 CEB7/8 CEB1U CEB1 CEB11/8 CEB11/4

0.50t 0.90t 1.40t 1.40t 2.00t 2.75t 2.75t 3.50t 4.50t

UNC 1⁄2” BSW 5⁄8” UNC 3⁄4” BSW 3⁄4” BSW 7⁄8” UNC 1” BSW 1” BSW 11⁄8” BSW 11⁄4”

8202002 8202004 90040817 8202005 8202006 91260061 8202007 8202008 8202009

Lifting Eye Bolts – Imperial, Collared

21 21 21 28 35 35 42 42 50 57 71 71 71 87 87 102 115 143 143 163 163 163 163

Fine EBMF10 EBMF12 EBMF16 EBMF20 EBMF22 EBMF24 EBMF30 EBMF33 EBMF36 EBMF39 EBMF42 EBMF48 EBMF56 EBMF64 EBMF76

Product Code

10

1.25 1.25 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00 2.00 3.00 4.00 4.00 4.00

21 28 35 42 50 57 71 71 87 87 102 115 143 143 163

14 18 23 30 32 38 49 49 53 53 66 75 97 97 106

9 11 14 16 20 22 27 27 35 35 40 49 56 56 66

19 24 31 35 41 48 65 65 73 73 90 99 124 124 140

17 21 27 38 41 42 52 52 64 64 76 89 116 116 125

33600020 33600021 33600022 33600023 33600024 33600025 33600026 33600027 33600028 33600029 33600030 33600031 33600032 33600033 33600034

• UNC and BSW range available from 3⁄8” – 3” • Complies with AS2317 • Customisation on other thread forms and long shanks available on request

Product Code BSW EBW375 EBW500 EBW625 EBW750 EBW875 EBW1000 EBW1125 EBW1250 EBW1500 EBW1750 EBW2000 EBW2500 EBW3000

WLL (t)

Threads B Ø Per Inch (mm)

C (mm)

DØ (mm)

E (mm)

F (mm)

Part Number

⁄8” ⁄2” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄8” 11⁄4” 11⁄2” 13⁄4” 2” 21⁄2” 3”

0.25 0.40 0.80 1.60 2.00 2.50 4.00 5.00 7.00 8.00 10.00 20.00 30.00

16 12 11 10 9.0 8.0 7.0 7.0 6.0 5.0 4.5 4.0 3.5

21 28 35 42 50 57 71 71 87 102 115 143 163

14 18 23 30 32 38 49 49 53 66 75 97 106

9 11 14 16 20 22 27 27 35 40 49 56 66

19 24 31 35 41 48 65 65 73 90 99 124 140

17 21 27 38 41 42 52 52 64 76 89 116 125

33600056 33600057 33600058 33600059 33600060 33600048 33600049 33600050 33600051 33600052 33600053 33600054 33600055

⁄4” ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” 9 ⁄16” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄8” 11⁄4” 11⁄2” 13⁄4” 2” 21⁄2” 3”

– – 0.25 0.25 0.40 0.40 0.80 1.60 2.00 2.50 4.00 5.00 7.00 8.00 10.00 20.00 30.00

20 18 16 14 13 12 11 10 9.0 8.0 7.0 7.0 6.0 5.0 4.5 4.0 4.0

21 21 21 28 28 35 35 42 50 57 71 71 86 102 115 143 163

14 14 14 18 18 23 23 30 32 38 49 49 53 66 75 97 106

9 9 9 9 11 14 14 16 20 22 27 27 35 40 49 56 66

19 19 19 19 24 31 31 35 41 48 65 65 73 90 99 124 140

17 17 17 17 21 27 27 38 41 42 52 52 64 76 89 116 125

224329 229862 33600043 172447 33600044 36004404 33600045 33600046 33600047 33600035 33600036 33600037 33600038 33600039 33600040 33600041 33600042

3 1

UNC EBU250 EBU312 EBU375 EBU437 EBU500 EBU562 EBU625 EBU750 EBU875 EBU1000 EBU1125 EBU1250 EBU1500 EBU1750 EBU2000 EBU2500 EBU3000

1 5

1800 999 024 | atom.com.au | getit@atom.com.au

605


Lifting Points & Panels

10

Lifting Points – Weld-On • Patented wear markings on the inside and on the outside

B E F

D

T

C Product Code ABA 1.6 ABA 3.2 ABA 5 ABA 10 ABA 20 ABA 31.5

A

WLL

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) T (mm)

1.6t 3.2t 5.0t 10.0t 20.0t 31.5t

30 41 51 70 90 108

16 23 27 38 52 64

100 137 172 228 272 320

35 50 60 80 115 130

16.0 21.0 27.5 35.0 40.0 50.0

57 80 99 130 175 204

41.5 59.0 71.5 95.0 135.0 154.0

Weight (kg) 0.44 1.10 2.30 5.30 10.7 18.3

Part Number 91268099 91268100 91268101 91268102 219441 36000196

Lifting Points – Weld-On • Forged from G300 Mild Steel – AS3679.1 grade 300PLUS • Full working load limit in all directions • 4:1 design factor • Surface phosphated • If using the DPLP as a lashing point, stated load limit can be doubled

Saturn manufactures quality products which undergo rigorous testing to meet and exceed Australian Standards including: • Synthetic slings • Ratchet tie downs • Clevis grab hooks • Chain • Chain assemblies • Lever Blocks And much more...

Product Code

WLL

A (mm)

B (mm)

C Ø (mm) D (mm)

E (mm)

Part Number

DPLP160 DPLP250 DPLP400 DPLP670 DPLP1000

1.6t 2.5t 4.0t 6.7t 10.0t

100 130 160 180 240

24 28 38 46 70

30 35 45 60 80

18 20 22 28 36

36000790 36000791 36000792 36000793 36000794

42 48 62 76 100

atom.com.au 1800 999 024

Lifting Panels – Concrete Products • Used for lifting pre-cast concrete products such as panels, drains, pipes • Complies with AS3850 • WLL from up to 32t available on request

Looking for hydraulic equipment? Get it from page 565

606

Product Code

WLL

Part Number

CSL013 CSL025 CSL050

1.3t 2.5t 5.0t

116265 116266 191714

The little things, but not every thing. No matter what your thing, get it @ ATOM


Hydraulic Lifting Systems & Rigging Tags

10

BENEFITS OF Hydraulic Lifting Systems Using Pascal’s Law, hydraulic systems utilise highly pressured fluids to create energy to lift or pull heavy items. Save the stress of manually lifting heavy items or negotiating forklifts by displaying a customised hydraulic system. Hydraulics can lift up to 150 tonnes, enough to get some homes off their stilts! ATOM have a great range of specialised hydraulic equipment to fit your every lifting need.

Flow A hydraulic pump produces flow.

Pressure Pressure occurs when there is resistance to flow.

Pascal’s Law

Pressure applied at any point upon a confined liquid is transmitted undiminished in all directions.

Load A

Manifold

Cylinder

Gauge Cylinder

Valve

Cylinder

Cylinder

Load B Pump

For your hydraulic lifting needs, or to simply ask whether there is a hydraulic solution to your lifting challenge, call ATOM!

Rigging Tags – Customisable

Rigging Tags – Customisable

RigTag®

• Inspection tags used to indicate periodic inspections • Can be custom made with your logo or numbering sequence • Other colours available to suit your requirements • Length: 175mm

• Inspection tags used to indicate periodic inspections • Durable, flexible and impact resistant • Australian made and owned • Quality custom printing available • Available in 175 and 300mm long

Product Code

Colour

Part Number

RIGTAGRED RIGTAGGREEN RIGTAGBLUE RIGTAGYELLOW

Red Green Blue Yellow

98882174 98882210 98882211 98882212

Rigging Tags – Starter Packs

175mm

300mm

Colour

Product Code

Part Number

Product Code

Part Number

White Yellow Orange Red Purple Blue Navy Fluro Green Green Brown Grey Black Pink

440 430 450 400 460 410 411 470 420 496 495 490 497

36000389 36000390 36000391 36000392 36000393 36000394 36000395 36000396 36000397 36000398 36000399 36000400 36000401

540 530 550 500 560 510 511 570 520 596 595 590 –

36000402 36000403 36000404 36000405 36000406 36000407 36000408 36000409 36000410 36000411 36000412 36000413 –

• Inspection tags used to indicate periodic inspections • Colour coded RGBY maintenance system allows for easy visual quarterly inspections - the preferred method used in mining and construction industries • Length: 175 and 300mm Includes: • 240 x 175mm or 300mm RigTags (60 of each colour red, green, blue and yellow) • NEXT INSP. DUE: hot foil printing • Tensioner plier • Permanent marker pen

Product Code

Description

Part Number

900 910

Starter Pack – 175mm Starter Pack – 300mm

36000414 36000415

1800 999 024 | atom.com.au | getit@atom.com.au

607


Rigging Screws

10

Rigging Screws – Clevis & Clevis • 6:1 safety factor • Galvanised • Manufactured using only heat certified Australian steel (AS1442/AS1444) • Complies with AS2319 - 2001 • Lock nuts available on request • Sizes 11/4” – 21/2” also available

Nominal Size M10 M12 M16 M20 M24 M33 M48 M64

A Closed 265 340 360 390 555 628 800 838

A Open 395 525 535 555 740 904 1,030 1,035

B (mm) 30 36 45 55 59 80 109 115

C (mm) 14 15 20 22 30 38 46 70

D (mm) 30 35 40 46 58 75 110 –

K (mm) 10 10 12 16 20 27 42 51

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) RSCC10 0.30 33600116 RSCC12 0.50 36000795 RSCC16 0.75 36000796 RSCC20 1.25 33600125 RSCC24 2.50 36000797 – – – – – – – – –

F (mm) 180 230 230 230 360 380 420

J (mm) 7 9 12 14 17 24 38

J (mm) 7 9 12 14 17 24 38

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) RSEE10 0.30 33600181 RSEE12 0.50 33600208 RSEE16 0.75 33600213 RSEE20 1.25 33600217 RSEE24 2.50 33600222 – – – – – –

F (mm) 180 230 230 230 360 380 420 405

Product Code RSCCL10 RSCCL12 RSCCL16 RSCCL20 RSCCL24 RSCCL33 RSCCL48 RSCCL64

Grade L WLL (t) 0.30 0.50 0.75 1.25 2.50 5.00 10.00 20.00

Part Number 33600136 33600137 33600139 33600140 33600142 33600143 33600144 36000798

Product Code RSCC10P RSCC12P RSCC16P RSCC20P RSCC24P RSCC33P RSCC48P RSCC64P

Grade P WLL Part Number (t) 0.60 33600117 1.00 33600120 1.60 33600122 2.50 33600126 4.00 33600129 8.00 33600132 16.00 33600134 28.00 36000799

Product Code RSCC10S RSCC12S RSCC16S RSCC20S RSCC24S RSCC33S RSCC48S RSCC64S

Grade S WLL Part Number (t) 0.80 33600118 1.20 33600121 2.00 33600123 3.20 33600127 5.00 33600130 10.00 33600133 20.00 33600135 36.00 36000800

Rigging Screws – Clevis & Eye • 6:1 safety factor • Galvanised • Manufactured using only heat certified Australian steel (AS1442/AS1444) • Complies with AS2319 - 2001 • Lock nuts available on request • Sizes 11/4” – 21/2” also available

Nominal Size M10 M12 M16 M20 M24 M33 M48

A Closed 260 335 355 385 555 644 730

A Open 385 525 535 550 735 920 1,000

B (mm) 30 36 45 55 59 80 109

C (mm) 14 15 20 22 30 38 46

D (mm) 30 35 40 46 58 75 110

E (mm) 8.5 8.5 9.0 10.5 13 14 18

K (mm) 10 10 12 16 20 27 42

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) RSCE10 0.30 33600145 RSCE12 0.50 33600148 RSCE16 0.75 33600153 RSCE20 1.25 33600157 RSCE24 2.50 33600162 – – – – – –

Product Code RSCEL10 RSCEL12 RSCEL16 RSCEL20 RSCEL24 RSCEL33 RSCEL48

Grade L WLL Part Number (t) 0.30 33600170 0.50 33600171 0.75 33600173 1.25 33600175 2.50 33600177 5.0 33600179 10.0 33600180

Product Code RSCE10P RSCE12P RSCE16P RSCE20P RSCE24P RSCE33P RSCE48P

Grade P WLL Part Number (t) 0.60 33600146 1.00 33600150 1.60 33600154 2.50 33600159 4.0 33600163 8.0 33600166 16.0 33600168

Product Code RSCE10S RSCE12S RSCE16S RSCE20S RSCE24S RSCE33S RSCE48S

Grade S WLL Part Number (t) 0.80 33600147 1.20 33600151 2.0 33600155 3.20 33600160 5.0 33600164 10.0 33600167 20.0 33600169

Rigging Screws – Eye & Eye • • • •

6:1 safety factor Fully tested and certified to AS2319 - 2001 Galvanised Manufactured using only heat certified Australian steel (AS1442/AS1444) • Lock nuts available on request • Sizes 11/4” – 21/2” also available

Nominal Size M10 M12 M16 M20 M24 M33 M48

608

A Closed 260 340 350 380 540 660 750

A Open 380 520 525 545 725 936 1000

E (mm) 8.5 8.5 9 10.5 13 14 18

F (mm) 180 230 230 230 360 380 420

H (mm) 21 30 36 42 51 70 91

Product Code RSEEL10 RSEEL12 RSEEL16 RSEEL20 RSEEL24 RSEEL33 RSEEL48

Grade L WLL (t) 0.30 0.50 0.75 1.25 2.50 5.00 10.00

Part Number 33600230 33600231 33600234 33600236 33600238 33600184 33600185

Product Code RSEE10P RSEE12P RSEE16P RSEE20P RSEE24P RSEE33P RSEE48P

Grade P WLL Part Number (t) 0.60 33600182 1.00 33600210 1.60 33600214 2.50 33600219 4.00 33600223 8.00 33600226 16.00 33600228

The little things, but not every thing. No matter what your thing, get it @ ATOM

Product Code RSEE10S RSEE12S RSEE16S RSEE20S RSEE24S RSEE33S RSEE48S

Grade S WLL Part Number (t) 0.80 33600207 1.20 33600211 2.00 33600215 3.20 33600220 5.00 33600224 10.00 33600227 20.00 33600229


Turnbuckles

10

Turnbuckles – Clevis & Clevis • 6:1 safety factor • Galvanised • Manufactured using only heat certified Australian steel (AS1442/AS1444) • Complies with AS2319-2001 • Lock nuts available on request A

B

C

D

F

Nominal Size M10 M12 M16 M20 M24 M33 11⁄4” 11⁄2”

A Closed 240 335 355 440 450 630 525 570

A Open 350 470 490 520 585 780 690 740

B (mm) 30 36 45 46 59 78 70 70

C (mm) 14 15 20 22 30 38 38 48

D (mm) 30 35 40 46 58 76 – –

F (mm) 150.0 190.0 204.0 216.5 232.0 252.0 255.0 275.0

K (mm) 10 10 12 16 20 27 25 32

K

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) TBCC10 0.30 33600186 TBCC12 0.50 33600189 TBCC16 0.75 33600192 TBCC20 1.25 33600195 TBCC24 2.50 33600198 – – – – – – – – –

Product Code TBCCL10 TBCCL12 TBCCL16 TBCCL20 TBCCL24 – TBCCL1250 TBCCL1500

Grade L WLL Part Number (t) 0.30 33600203 0.50 33600204 0.75 33600239 1.25 33600240 2.50 33600241 – – 5.00 33600205 6.00 33600206

Grade P WLL Part Number (t) 0.60 33600187 1.00 33600190 1.60 33600193 2.50 33600196 4.00 33600199 8.00 33600201 – – – –

Product Code TBCC10P TBCC12P TBCC16P TBCC20P TBCC24P TBCC33P – –

Product Code TBCC10S TBCC12S TBCC16S TBCC20S TBCC24S TBCC33S – –

Grade S WLL Part Number (t) 0.80 33600188 1.20 33600191 2.00 33600194 3.20 33600197 5.00 33600200 10.0 33600202 – – – –

Turnbuckles – Clevis & Eye • 6:1 safety factor • Galvanised • Manufactured using only heat certified Australian steel (AS1442/AS1444) • Complies with AS2319-2001 • Lock nuts available on request A

J

B C D

G H

Nominal Size M10 M12 M16 M20 M24 M33 11⁄4” 11⁄2”

A Closed 235 330 355 390 445 643 525 570

A Open 340 470 490 520 580 793 690 740

B (mm) 30 36 45 55 59 78 70 70

C (mm) 14 15 20 22 30 38 38 48

D (mm) 30 35 40 46 58 76 – –

F (mm) 150 190 204 216 232 252 255 275

F

G (mm) 11 15 17 21 25 33 33 38

H (mm) 21 30 36 42 51 70 67 72

J (mm) 7 9 12 14 17 24 22 25

K

K (mm) 10 10 12 16 20 27 25 32

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) TBCE10 0.30 33600242 TBCE12 0.50 33600245 TBCE16 0.75 33600250 TBCE20 1.25 33600253 TBCE24 2.50 33600256 – – – – – – – – –

Product Code TBCEL10 TBCEL12 TBCEL16 TBCEL20 TBCEL24 – TBCEL1250 TBCEL1500

Grade L WLL Part Number (t) 0.30 33600261 0.50 33600262 0.75 33600263 1.25 33600264 2.50 33600265 – – 5.00 33600246 6.00 33600249

Product Code TBCE10P TBCE12P TBCE16P TBCE20P TBCE24P TBCE33P – –

Grade P WLL Part Number (t) 0.60 33600243 1.00 33600247 1.60 33600251 2.50 33600254 4.00 33600257 8.00 33600259 – – – –

Product Code TBCE10S TBCE12S TBCE16S TBCE20S TBCE24S TBCE33S – –

Grade S WLL Part Number (t) 0.80 33600244 1.20 33600248 2.00 33600252 3.20 33600255 5.00 33600258 10.0 33600260 – – – –

Turnbuckles – Eye & Eye • 6:1 Safety factor • Galvanised • Manufactured using only heat certified Australian steel (AS1442/AS1444) • Complies with AS2319- 2001 • Lock nuts available on request

CLOSED

A OPEN G H

Nominal Size M10 M12 M16 M20 M24 M33 11⁄4" 11⁄2"

A Closed 230 330 350 385 440 656 570 600

A Open 335 470 485 515 570 806 720 740

F (mm) 150 190 204 216 232 252 255 275

G (mm) 11 15 17 21 25 33 33 38

H (mm) 21 30 36 42 51 70 67 72

F

J (mm) 7 9 12 14 17 24 22 25

J

Heavy Duty (Un-Tested) Product WLL Part Number Code (t) TBEE10 0.30 33600266 TBEE12 0.50 33600269 TBEE16 0.75 33600274 TBEE20 1.25 33600277 TBEE24 2.50 33600280 – – – – – – – – –

Product Code TBEEL10 TBEEL12 TBEEL16 TBEEL20 TBEEL24 – TBEEL1250 TBEEL1500

Grade L WLL (t) 0.30 0.50 0.75 1.25 2.50 – 5.00 6.00

Part Number 33600285 33600286 33600288 33600289 33600290 – 33600287 33600273

Product Code TBEE10P TBEE12P TBEE16P TBEE20P TBEE24P TBEE33P – –

1800 999 024 | atom.com.au | getit@atom.com.au

Grade P WLL Part Number (t) 0.60 33600267 1.00 33600271 1.60 33600275 2.50 33600278 4.00 33600281 8.00 33600283 – – – –

Product Code TBEE10S TBEE12S TBEE16S TBEE20S TBEE24S TBEE33S – –

Grade S WLL Part Number (t) 0.80 33600268 1.20 33600272 2.00 33600276 3.20 33600279 5.00 33600282 10.0 33600284 – – – –

609


Commercial & Stainless Steel Turnbuckles

10

Turnbuckles – Stub & Stub

Turnbuckles – Commercial, Hook & Eye

• Manufactured using only heat certified Australian steels (AS1442/AS1444) • Certified weld procedure provided • Galvanised body • Stub ends G300 mild steel (AS/NZS 3679.1‑300) – weldable hot rolled structural steel

• Forged hot dipped galvanised steel • For commercial use • Not for lifting applications A Open/Closed

E D

Product Code TBSS10 TBSS12 TBSS16 TBSS20 TBSS24 TBSS1250 TBSS1500

Nominal Size M10 M12 M16 M20 M24 11⁄4” 11⁄2”

WLL (t)

A Closed

A Open

B (mm)

F (mm)

Part Number

0.30 0.50 0.75 1.25 2.50 5.00 6.00

265 335 365 365 400 415 600

375 475 495 500 535 565 740

55 70 72 79 89 70 160

150 191 204 217 232 255 275

33600296 33600297 33600300 33600301 33600302 33600298 33600299

Nominal Size

A Closed (mm)

A Open (mm)

D (mm)

E (mm)

M5 M6 M8 M10 M12 M16 M20 M22 M25

120 160 200 230 330 350 385 430 440

165 245 305 335 470 485 515 560 570

5 6 8 10 12 16 20 22 25

7 9 11 16 18 24 28 32 36

Turnbuckles – Hook & Eye

Turnbuckles – Stainless Steel, Hook & Eye

• Manufactured using only heat certified Australian steel (AS1442/AS1444) • Galvanised body • Not for lifting applications

• Grade 316 stainless steel • Eyes are fully welded • Not for lifting applications

Product Code TBHE10 TBHE12 TBHE16 TBHE20 TBHE24

Nominal Size M10 M12 M16 M20 M24

A Closed (mm) 245 325 355 400 445

A Open (mm) 345 465 495 530 580

C (mm) 20 25 30 40 50

F (mm) 150 191 204 217 232

G (mm) 11 15 17 21 25

H (mm) 21 30 36 42 51

J (mm) 7 9 12 14 17

M (mm) 12 14 20 23 25

Part Number 33600291 33600292 33600293 33600294 33600295

Part Number 8225001 8225003 8225005 8226001 8226003 8227001 8227003 8228001 8228003

Size

Part Number

Size

Part Number

Size

Part Number

5mm 6mm

95510129 95510002

8mm 9mm

88850007 88853015

10mm 12mm

95510134 98881191

Turnbuckles – Stainless Steel, Hook & Hook • Grade 316 stainless steel • Not for lifting applications

Turnbuckles – Commercial, Eye & Eye • Forged hot dipped galvanised steel • For commercial use • Not for lifting applications A Open/Closed

Part Number

Size

Part Number

Size

Part Number

4mm 5mm

36003824 36003825

6mm 8mm

36003826 36003827

10mm 12mm

36003828 36003829

Turnbuckles – Stainless Steel, Clevis & Clevis

E D

Nominal Size

A Closed (mm)

A Open (mm)

D (mm)

E (mm)

M5 M6 M8 M10 M12 M16 M20 M22 M25

120 160 200 230 330 350 385 430 440

165 245 305 335 470 485 515 560 570

5 6 8 10 12 16 20 22 25

7 9 11 16 18 24 28 32 36

Find more eye bolts, hooks and clips in our General Hardware section from page 733 610

Size

Part Number 8225002 8225004 8225006 8226002 8226004 8227002 8227004 8228002 8228004

• Grade 316 stainless steel • Lock nuts included • Not for lifting applications

Size

Part Number

Size

Part Number

Size

Part Number

5mm 6mm

80503200 80503201

8mm 10mm

80503202 80503203

12mm –

80503204 –

Turnbuckles – Stainless Steel, Eye & Eye • Grade 316 stainless steel • Eyes are fully welded • Not for lifting applications

Size

Part Number

Size

Part Number

Size

Part Number

5mm 6mm

258913 80503206

8mm 9mm

80503207 80503208

12mm 20mm

80503209 270593

The little things, but not every thing. No matter what your thing, get it @ ATOM


Manual Lifting Products, Commercial Hooks & Chain DIFFERENT Chain Grades & Their Usage

10

METAL CHAIN & GRAB HOOK – GRADE 70 • Complete with 8/10mm grade 70 clevis winged cradle grab hooks on each end • Zinc-dichromate gold finish that prevents rust • Test certificate and metal compliance tag included • Comes packed in a reusable bucket • Length: 9m • Complies with AS4344.2001 • Not for lifting applications

Grade 30 – Proof Coil Suitable for general purpose use such as security barriers, guard rails and load restraint. This medium duty chain is constructed from low carbon steel and is not suitable for lifting applications.

Grade 43 – High Test Made from high carbon steel. Provides greater working load limits in comparison to Grade 30 chain. It is recommended for use in construction and agriculture where the larger working load limits are required. This chain is not recommended for lifting applications.

Link Size

WLL

Part Number

8mm 10mm

3.8t 6.0t

91250030 79012031

Metal Chain – Grade 70 • • • •

Grade 70 transport chain Complies with AS/NZS4344.2001 Sold per metre Not for lifting applications

Grade 70 – Transport Also called transport chain, Grade 70 chain, is high strength heat treated carbon steel. It is recommended as a load restraint or tie down. Grade 70 typically has a gold finish for easy identification. This chain is not suitable for lifting applications.

Grade 80 – Alloy Made of heat treated alloy steel. This material gives it a high strength to weight ratio. This chain is recommended for lifting, rigging and tie down applications.

Product Code

Size

Lashing Capacity

Weight

Part Number

CT06 CT08 CT10 CT13

6mm 8mm 10mm 13mm

2.3t 3.8t 6.0t 9.0t

0.76kg/m 1.40kg/m 2.15kg/m 3.35kg/m

88890935 10004001 10004002 88889885

Commercial Hooks – Clevis Pin, Claw & Grab • Grade 70 • Not for lifting applications

Grade 100 – Alloy Approximately 25% stronger than Grade 80 chain. This chain is recommended for overhead lifting applications.

Can’t find the right chain? Call ATOM with your request!

Claw Hooks Product Code

Grab Hooks

Chain Dia.

WLL

Unit Weight

Part Number

8mm 10mm

3.8t 6.0t

0.30kg 0.45kg

8224001 8224002

6mm 8mm 10mm 13mm

2.3t 3.8t 6.0t 9.0t

0.18kg 0.30kg 0.45kg 1.45kg

8229011 8229012 8229013 8230001

Claw Hooks TCH08 TGC10 Grab Hooks TGH06 TGH08 TGH10 TGH13

1800 999 024 | atom.com.au | getit@atom.com.au

611


Commercial & Plastic Grade Metal Chain

10

PLASTIC CHAIN • Made of high density precision moulded polymer plastic • Lightweight, floats and fade resistant (UV stabilised) • Not recommended or certified for industrial lifting or other standard controlled usages • Other colours available on request • Sold per metre

Product Code

Colour

Roll Length

Size

Part Number

PC6W PC6Y PC8X35Y CM6PBY PC6R PC6RW PC6RB

White Yellow Yellow Yellow/Black Red Red/White Red/Black

40m 40m 35m 40m 40m 40m 40m

6mm 6mm 8mm 6mm 6mm 6mm 6mm

10742002 10742003 10743003 91250041 117660 91250039 36000192

Metal Chain – Weldless • Jack chain is a weldless chain for light duty applications • Available in several finishes – zinc plated, stainless steel and brass • Also available in 1.6mm • Length: 30m • Not for lifting applications

Zinc Plated

Get manual lifting products in our Material Handling & Storage section starting from page 619

Stainless Steel

Size

Product Code

Part Number

Product Code

Part Number

2.0mm 2.5mm 3.0mm

J14Z J12Z J10Z

10003005 10003003 10003004

– J12SS J10SS

– 79911442 187668

Metal Chain – Grade 30, Galvanised • General purpose chain manufactured from low carbon steel • Used for agricultural, industrial, manufacturing, marine and general engineering applications • Hot dip galvanised; also available in zinc finish and self-colour • Available in regular link, long link and short link • Available packed in 50kg pails, 500kg drums and by cut length (per metre) • Not for lifting applications

C

B

D

50kg Pail

612

500kg Drum

Per Metre

Size

B

C

D

Length

Part Number

Length

Part Number

Part Number

3mm 4mm 5mm 6mm 8mm 10mm 13mm 16mm 20mm 24mm

13.1mm 16.0mm 19.4mm 23.5mm 29.5mm 36.0mm 46.0mm 56.0mm 70.0mm 83.6mm

15.7mm 18.6mm 22.0mm 26.0mm 32.0mm 39.0mm 49.0mm 60.0mm 73.3mm 87.0mm

3.00mm 3.80mm 4.75mm 6.00mm 7.60mm 9.50mm 12.00mm 16.00mm 20.00mm 24.00mm

249.0m 153.0m 96.5m 60.0m 37.0m 23.5m 13.8m 9.0m – –

91250026 90048379 60017138 91258022 90048382 60019281 90048384 60019282 – –

2,490.0m 1,525.0m 965.0m 600.0m 370.5m 235.5m 138.5m 91.0m – –

60019283 60019284 60019285 60019286 60019287 60019288 60019289 60019290 – –

10003001 10003002 10004008 10004003 10004004 10004005 10004006 60019291 91250037 90048356

The little things, but not every thing. No matter what your thing, get it @ ATOM


Load Restraints HOW TO Restrain a Load It is Australian Law to ensure that all items being transported on a trailer, utility vehicle or truck are restrained properly. Unrestrained items can cause serious damage to property, personal injury or death. If your load is not restrained properly you may get a fine or, for serious breaches, be prosecuted in court. Follow this guide to ensure your load is properly restrained - Because it is easy at ATOM. What restraining methods are suitable for what loads? When restraining lighter items such as garden trimmings, cover with a tarpaulin or netting. This will stop it being blown off in transit. Heavier items such as white-goods and furniture should be fixed to the headboard to ensure that they do not fall over during transit, this includes heavy braking and the vehicle negotiating around corners. Small items such as tools should be contained within boxes, then if necessary strapped down. Larger tools, such as shovels or rakes, should be restrained by straps or a net if not adequately contained by the vehicle body. Why Tie Down Tying down a load creates friction between the vehicle, load and the restraint keeping the load in place. To create adequate friction restraints need to be fastened tight to create an ample amount of tension. To tie down a load we suggest use of ratchet straps and/or webbing straps. Avoid using rope as it does not create the same amount of tension as ratchet or webbing straps even though it feels tight. A secure load should be tied down from the top and any exposed sized. Other things to remember • Your load must not cover your number plate, lights or reflectors. • If any part of your load protrudes more than 1.2m behind your vehicle or trailer, or if it protrudes in a way that is not easily visible a brightly coloured flag (red, red/yellow, or yellow) measuring at least 450 x 450mm should be fixed to the extreme end of the protrusion. If carrying such load at night, a red light or at least two reflectors must be attached to the extreme end of the protrusion.

10

Load Restraint – Cargo Straps, Ocky Straps • Elastic strap • Cord with 5mm heavy duty hardened steel hooks • 100% latex core • 40% stronger than rubber • UV protected

Length

Part Number

300mm 450mm 610mm 12 Pack Assorted Sizes

3246001 3246002 3246003

Length 760mm 900mm 1,050mm

Part Number 3246004 3246005 3246006 3245006

Load Restraint – Cargo Straps, Webbing • • • •

Webbing strap with quick lock buckle Industrial strength and quality UV stabilised webbing Trivalent chrome buckle for maximum strength and corrosion resistance • Complies with AS/NZ 4380 • Lashing capacity: 400kg

Product Code

Colour

Size

Part Number

121 122 123 124 125

White Yellow Blue Red Black

1.0(l)m x 25(w)mm 1.5(l)m x 25(w)mm 2.0(l)m x 25(w)mm 2.5(l)m x 25(w)mm 3.5(l)m x 25(w)mm

91290024 91290025 91290026 91290027 91290028

Load Restraint – Cargo Net Kits • Compliant design – tested to 1t • UV stabilised • Integrated D-rings to assist holding down • Modular webbing positions provides multiple applications per size • Multiple webbing loops for greater flexibility • Unique webbing overlap to ensure load transference • High tenacity mesh for long life • Multiple perimeter eyelets • Easily converted into load restraint compliant tie down Includes: • 4 x rope ties and 4 x cam buckles

• Items such as steel pipe can be slippery, to prevent slipping utilise rubber mats or wooden dunnage. • Make sure that heavy items are not stacked on top of lighter items.

Product Code

Size

Dimensions

Part Number

NETSYS1 NETSYS2 NETSYS3

Small Medium Large

2.46 x 2.46m 2.80 x 2.84m 2.80 x 3.44m

35000130 35000131 35000132

1800 999 024 | atom.com.au | getit@atom.com.au

613


Load Restraints, Recovery Straps, Loadbinders & Tie Down Straps

10

Load Restraint – Tie Down, Cargo Nets Tie Down Nets: • Made to order in standard 60ply/380 denier black HDPE diamond mesh

Diamond Product Code

Cargo Net: • Made to order to customer requirements • Can also be made to order in other twine sizes and colours

Square Dimensions

• Supplied with 100% polyester webbing • Two heavy duty protective sleeves and protective eyes • Secure your load with confidence • Complies with AS/NZS 4380.2001

91290073

Cargo Net Twine Size

Tie Down Nets – Diamond Mesh – Standard Sizes MTO ND6050M4X4 4 x 4m 60ply ND6050M5X5 5 x 5m 60ply ND6050M6X6 6 x 6m 60ply ND6050M10X10 10 x 10m 60ply ND6050M20X10 10 x 20m 60ply ND6050M12X12 12 x 12m 60ply Tie Down Nets – Square Mesh ND6050M10X30 10 x 30m 60ply ND6050M12x15 12 x 15m 60ply NS6050M30X10 30m x 10m 60ply Cargo Net – MTO CARGONET6X6 6 x 6m 12(dia.)mm

Mesh Size

Colour

Part Number

50mm2 50mm2 50mm2 50mm2 50mm2 50mm2

Black Black Black Black Black Black

90040922 90040908 90040921 90040920 60015114 60015115

50mm2 50mm2 50mm2

Black Black Black

180134 188297 93610001

White

98889470

300mm

2

Loadbinder – Commercial Grade, Ratchet Type • • • • •

TIE DOWN STRAPS – RATCHET

With eye grab hooks Incorporating special safety locking device Supplied with a safety warning/instruction swing label tag All loadbinders comply with AS/NZS4344.2001 Not for lifting applications

8421003 Width

Length

Lashing Capacity

Part Number

25mm 35mm 50mm 75mm 75mm 75mm

5m 6m 9m 9m 4m 9m

750kg 1.5t 2.5t 5.0t 5.0t 10.0t

8421003 8421006 8420001 91290078 91290073 147063

Tie Down Straps – Ratchet • • • • • • • •

Quickloader patent retractable ratchet Lashing capacity: 400kg (770lbs) Breakstrength: 800kg (1.760lbs) Length of non-retracting part: 0.3m (0.9ft) Length of retracting part: 3.3m (10.8ft) SHF: 25 daN STF: 184 daN Elongation: 7% at LC 60020842

Product Code

Working Load

Breakforce

Pack

Part Number

QL0420

350kg

700kg

Twin

60020838

QL0437

680kg

1.36t

Single

60020839

QL0468

680kg

1.36t

Twin

60020840

QL0543

1t

2.00t

Single

60020842

QL0482

1t

2.00t

Twin

60020841

Tie Down Straps – Winch Strap, Clip-On TCW509 Product Code

Size

Lashing Capacity

Part Number

TRLB06 TRLB08 TRLB10 TRLB13

6mm 7 – 8mm 10mm 13mm

2.3t 3.8t 6.0t 9.0t

88850693 88860798 90040066 88889510

• • • • • •

Clips to truck railing Supplied with 50mm(w) x 9m(l) strap Other lengths available on request Slide-on model available on request Lashing capacity: 2.5t Complies with AS/NZS 4344.2001

Recovery Strap – Snatch • • • • •

Specifically designed to recover bogged vehicles Heavy duty nylon strap with reinforced eyes 20% stretch factor Minimum breaking strain: 9t 60(w)mm x 9(l)m

91298119

Tie Down Straps – Winch Strap TRS509 • • • • •

90040405

614

Replacement strap 50mm(w) x 9m(l) strap Lashing capacity: 2.5t Other lengths available on request Complies with AS/NZS 4344.2001

91408052

The little things, but not every thing. No matter what your thing, get it @ ATOM


How To Use A Ratchet Strap

10

HOW TO USE A RATCHET STRAP

1

Insert loose end of strap into mandrel of ratchet

2

Pull strap through slot in mandrel

3

Pull slack out of strap to make strap tight

4

Crank the ratchet to desired tightening

5

Make sure strap stays in line with other to avoid tangling/locking

6

Lock handle down after tightening

HOW TO RELEASE A RATCHET STRAP

1

Pull trigger toward back handle

2

Open ratchet all the way

3

Webbing should release

4

Pull webbing out of mandrel

5

Pull trigger to unlock

6

Close ratchet back down

1800 999 024 | atom.com.au | getit@atom.com.au

615


Ropes – Polyethylene, Polyester & Polypropylene

10

Ropes – Polyethylene, Twisted Coil & Spool

Ropes – Polypropylene, Braided • Polypropylene will not mould, mildew or rot and is resistant against fuel, oil and most acids and alkalis • UV treated to reduce degradation from sunlight • Braided 8 and 32 strand • Suitable for a wide range of industrial applications • Good energy absorption and repeated shock loads • Lightweight and high strength • Multi-filament provides additional strength and abrasion resistance • Floats on water

• General purpose, easy to handle rope • Lightweight 3-strand polyethylene fibrillated (hairy) marine rope • Good resistance to abrasion and knots well • Maintains strength, wet or dry • Does not absorb water, floats • Resistant to most acids, alkalis, grease, oils, solvents, water and fungal attacks • UV stabilised • White Diameter

Length

Part Number

Diameter

Length

Part Number

6mm 6mm 8mm 8mm

250m Coil 250m Spool 125m Spool 250m Coil

91358064 91358058 91358059 91358065

10mm 12mm 16mm –

125m Spool 250m Coil 250m Coil –

91358060 91350007 91350053 –

Ropes – Polyester, Twisted • • • • • •

Polyester is easy to handle and knot Twisted, three strand High abrasion resistance Does not float in water Dimensions: 10(dia)mm x 15(l)m White

Strands

Diameter

Length

Colour

Part Number

8 32

4mm 9mm

30m 15m

Yellow/Red Red/White/Blue

30008213 30008214

Ropes – Polypropylene, Twisted Coil & Spool • Polypropylene will not mould, mildew or rot and is resistant against fuel, oil and most acids and alkalis • UV treated to reduce degradation from sunlight • Economical, 3-strand general purpose synthetic rope • Suitable for a wide range of industrial applications • Good energy absorption and can take repeated shock loads • Lightweight and high strength • Floats on water • UV stabilised

30008217

Rope – Polyester, Braided • • • • • • • •

Polyester is easy to handle and knot Braided, 32 strand High abrasion resistance High quality rope with a high breaking strength Suitable for most worksites Does not float in water Dimensions: 8(dia)mm x 20(l)m Black/red

30008212

Rope – Polypropylene, Twisted • Polypropylene will not mould, mildew or rot and is resistant against fuel, oil and most acids and alkalis • UV treated to reduce degradation from sunlight • Suitable for securing tarps and light loads • 3 strand construction makes it strong and resistant to kinking while still holding its shape • Floats on water • Dimensions: 4(dia)mm x 30(l)m • Yellow/black

30008215

616

Colour

Diameter

Length

Part Number

White White White White White White White White Green Orange Yellow Yellow Yellow

6mm 8mm 10mm 12mm 14mm 16mm 20mm 24mm 6mm 8mm 6mm 6mm 12mm

220m Coil 220m Coil 220m Coil 220m Coil 220m Coil 220m Coil 220m Coil 220m Coil 250m Coil 250m Coil 250m Coil 250m Spool 125m Superfilm

27000001 27000002 27000003 27000004 27000005 27000006 27000007 27000008 91358182 91350002 91358144 90001031 90001034

Rope – Polypropylene, Twisted Blue/Yellow Strand, Coil • Polypropylene will not mould, mildew or rot and is resistant against fuel, oil and most acids and alkalis • UV treated to reduce degradation from sunlight • Commonly used in the telecommunication industry for cable hauling • Tangle-free uncoiling to coil end, no waste • Floats on water • 2 blue and 1 yellow strand • Dimensions: 6(dia)mm x 400(l)m 91350034

The little things, but not every thing. No matter what your thing, get it @ ATOM


Ropes – Nylon, Manila, Sisal & Twine Rope – Nylon, Braided

Rope – Sisal, Coil

• • • • • •

• • • • •

High strength and abrasion resistance Excellent resistance to friction Great for most starter cord requirements Nylon, 12 strand Dimensions: 5(dia)mm x 5(l)m White

10

Natural fibre sinking rope Biodegradable and electrostatic resistant Low stretch with minimum recoil Holds knots well 36mm is made to order

30008216

Rope – Nylon, Twisted, Coil & Spool • 3 strand, high strength, medium lay synthetic sinking rope • Soft on hands and shock absorbent • Rot and mildew resistant • White

Dia.

Product Code Length

Part Number

Dia.

Product Code Length

Part Number

4mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm

SS04C600 SS06C250 SS08C250 SS10C250 SS12C250 SS14C250 SS16C250 SS18C250

91340000 30002001 30002002 30002003 30002004 30002005 30002006 91348008

20mm 22mm 24mm 28mm 32mm 40mm 48mm –

SS20C250 SS22C250 SS24C250 SS28C250 SS32C250 SS40C250 SS48C125 –

30002007 91348010 30002008 91348012 60015079 91348013 60015080 –

600m 250m 250m 250m 250m 250m 250m 250m

250m 250m 250m 250m 250m 250m 125m –

Twine – Polypropylene Diameter

Length

Part Number

6mm 10mm 12mm 16mm

250m Coil 125m Spool 250m Coil 250m Coil

88898314 91358042 88898315 91358052

• Single-ply polypropylene twine • Suitable for cardboard baling machines and general purpose tying • White • Sold per reel

Rope – Manila, Coil • • • • •

Natural fibre sinking rope Biodegradable and electrostatic resistant Low stretch with minimum recoil Holds knots well Length: 250m

Size

Tex

Length

Part Number

200 350 500 700

5,000 2,860 2,000 1,430

740m 1,295m 1,850m 2,580m

91118082 91118083 4224003 4224002

Twine – Marline Diameter

Product Code

Part Number

Diameter

Product Code

Part Number

6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm

MN06C250 MN08C250 MN10C250 MN12C250 MN14C250 MN16C250 MN18C250 MN20C250

30001001 30001002 30001003 30001004 30001005 30001006 91338006 30001007

22mm 24mm 28mm 32mm 36mm 40mm 48mm –

MN22C250 MN24C250 MN28C250 MN32C250 MN36C250 MN40C250 MN48C250 –

91330002 30001008 91338010 91330001 30001009 91338012 60015081 –

• Synthetic (oily) beige or traditional black tarred twine • Used for vent bags and wire rope whipping • Sold per reel

Rope burn? We’ve got a huge range of gloves from page 2 Get ‘em @ ATOM

Colour

Tex

Diameter

Length

Part Number

Synthetic Beige Synthetic Beige Traditional Black Traditional Black

– –

3mm 4mm – –

91m 345m 60m 120m

91110016 91118107 4248001 91110017

6,700 (Heavy 2 Ply) 1,200 (Fine 2 Ply)

1800 999 024 | atom.com.au | getit@atom.com.au

617

Profile for ATOM

Lifting & Rigging | ATOM  

No matter what lifting or rigging product you require, you can get it at ATOM. We can source anything for you, even if it's not in this publ...

Lifting & Rigging | ATOM  

No matter what lifting or rigging product you require, you can get it at ATOM. We can source anything for you, even if it's not in this publ...

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded