__MAIN_TEXT__

Page 1


5

Drilling DRILLS Jobber Drills  Reduced Shank Drills  Taper Shank Drills  Masonry Drills  Multi-Purpose Drills  Wood Drills & Augers  Step Drills  Countersink Drills  Centre Drills  Spot Weld Drills  Panel & Rivet Drills  Broach Cutters  Drilling Accessories  Screw Extractors  Deburring Tools & Accessories 

Threading 266 – 269 269 – 270 271 272 – 273 273 274 275 275 276 276 276 277 – 279 282 282 – 283 283

HOLESAWS & ACCESSORIES Holesaws  Holesaw Sets  Arbors & Arbor Accessories  TAPPING & THREADING Straight Taps, Spiral Taps, Pipe Taps  Tap & Die Sets  Tap & Die Tools  Pipe Threader & Dies  Thread Files 

280 280 281

286 – 288 289 – 290 290 291 291


How To Select Drill Bits

5

Selecting Drill Bits

Type Material Coating

Selecting the correct drill bit made from the right material will help achieve a great surface finish, hole tolerance, long tool life and overall performance. Selecting the wrong drill bit can lead to short tool life, structural flaws, poor surface finish, and prematurely worn or broken drill bits.

Bits by Type Wood Drill Bits Identified by the pointed tips with spurs on either side. These spurs grab the wood and carve it away.

High Speed Steel (HSS) HSS is a hard and heat resistant material. It is the most commonly used material, suited for general purpose applications.

Masonry Drill Bits These bits feature a carbide insert at the tip which allows it to drill into hard materials such as stone and cinder.

Cobalt These high performance drills are suitable for harder steels and stainless. Cobalt is a much harder material and can dissipate heat better at high temperatures. Widely considered an upgrade from HSS.

Jobber Drill Bits These bits are made for general purpose applications. The most common type of drill used in industry, available in many materials and coatings. Step Drill Bits These bits gradually increase in diameter. Accompanied by either straight transitions, forming a counterbore, or angled transitions, forming a countersink. These are best suited for soft or thin materials. Hole Saws Hole saws are shaped like an open ended cylinder with saw teeth on the end. These are best suited for cutting large holes in a range of materials. Annular Cutters Annular cutters leave a solid core at the hole centre. Suitable for drilling large diameters and depths. Commonly used with portable magnetic based drilling machines. Countersink Drill Bits These specialised drill bits are designed to cut countersink holes in place for countersunk bolts or screws. Countersink drill bits are suitable for a wide range of materials.

264

Bits by Material & Coating

Carbide Carbide, commonly used on masonry drill bit inserts, stays sharp for much longer than other materials. It is suitable for use on abrasive materials such as cast iron, non-ferrous metal and fibreglass. Black Oxide (Surface Treatment) Helps reduce friction and retain coolant, cutting compound or fluid. Best choice for steels, and not recommended for nonferrous materials. Bright Finish Bright finish refers to uncoated materials. Polished for increased chip flow. These are suited for most general purpose applications. Titanium Nitride (TiN) Coating TiN coating provides reduced friction on surfaces, allowing for much higher drilling speeds. It is also very tough for a long tool life. TiN is best suited for metal, wood, PVC and fibreglass.

IT’S EASY @ ATOM

The little things, but not every thing. No matter what your thing, get it @ ATOM


How To Select Drill Bits

Selecting Drill Bits Bits by Shank Hex Shank A common type of shank due to high torque capabilities. The 6 sides keep it stable when held by a 3 jaw or hex chuck. Straight Shank The most common shank form due to high centering accuracy with no wobble. The whole of the drill bit, shaft and shank, is usually of the same diameter. SDS Shank SDS shanks are made to be quick loading with the help of specialty chucks. They are developed to suit hammering power tools, such as a rotary hammer, the shank moves up and down slightly within the chuck, acting like a piston when hammered. Not all drills support SDS shanks, so be sure to check compatibility first. Tapered Shank Tapered shanks are most commonly used within metalworking applications. They fit directly into the drill and lock themselves in place for high centering accuracy. Also referred to as Morse Taper or MTS drills. Reduced Shank Reduced shanks are often 1⁄4”, 3⁄8” or 1 ⁄2” and are designed to allow larger diameter drills to be used with a chuck capable of only holding smaller diameter drills.

Can’t find the shank you’re looking for? Contact ATOM.

5

Shank Size Anatomy

Bits By Size

Metric/Imperial Conversion Chart Metric (mm)

Imperial

Metric (mm)

Imperial

Metric (mm)

Imperial

0.100

7.000

16.272

41

0.200

7.144

9

⁄32”

16.669

21

0.300

7.541

19

⁄64”

17.000

0.397

1

⁄64”

7.938

5

⁄16”

17.066

43

0.400

8.000

17.462

11

0.500

8.334

21

17.859

45

0.600

8.731

11

18.000

0.700

9.000

18.256

23

0.794

1

⁄32”

9.128

23

18.653

47

0.800

9.525

3

⁄8”

19.000

0.900

9.922

25

⁄64”

19.050

3

1.000

10.000

19.447

49

1.191

3

⁄64”

10.319

13

⁄32”

19.844

25

1.588

1

⁄16”

10.716

27

⁄64”

20.000

1.900

11.000

20.241

51

1.984

5

⁄64”

11.112

7

⁄16”

20.638

13

2.000

11.509

29

⁄64”

21.000

2.381

3

⁄32”

11.906

15

⁄32”

21.034

53

2.778

7

⁄64”

12.000

21.431

27

3.000

12.303

31

⁄64”

21.828

55

3.175

1

⁄8”

12.700

1

⁄2”

22.000

3.572

9

⁄64”

13.000

3.969

5

⁄32”

13.097

33

4.000

13.494

17

⁄64” ⁄32”

⁄64”

⁄64” ⁄32”

⁄64” ⁄16”

⁄64” ⁄32”

⁄64”

⁄4” ⁄64” ⁄32” ⁄64”

⁄16” ⁄64”

⁄32” ⁄64”

22.225

7

⁄64”

22.622

57

⁄8”

⁄32”

23.000

⁄64”

4.366

11

⁄64”

13.891

35

23.019

29

4.762

3

⁄16”

14.000

23.416

59

5.000

14.288

9

⁄16”

23.812

15

5.159

13

⁄64”

14.684

37

⁄64”

24.000

5.556

7

⁄32”

15.000

5.953

15

⁄64”

15.081

19

6.000

15.478

39

6.350

1

6.747

17

⁄64”

⁄32” ⁄64” ⁄16”

24.209

61

⁄32”

24.606

31

⁄64”

⁄64”

25.000

⁄32”

⁄4”

15.875

5

⁄8”

25.003

63

⁄64”

16.000

25.400

1”

⁄64”

Drill bit Anatomy Flute Length Chisel Edge

Cutting Lip

Flute

Land

Shank

1800 999 024 | atom.com.au | getit@atom.com.au

IT’S EASY @ ATOM 265


Jobber Drills

5

Jobber Drills – Cobalt

JOBBER DRILLS – SILVER

• 5% cobalt improves abrasive and heat resistance in tough materials • Designed for drilling materials with high hardness and tensile strength • Other sizes available on request Everyday Low Price

• Silver jet jobber drills • These drills are designed to give optimum performance in a wide range of materials • Used by engineers, tradies and DIYers • Manufactured to ANSI B94.11 standards

Metric Product Code

Size

DJSM1.0 DJSM1.5 DJM2.0 DJM2.5 DJM3.0 DJM3.3 DJM3.5 DJM4.0 DJM4.5 DJM5.0 DJM5.5 DJM6.0 DJM6.5 DJM7.0 DJM7.5 DJM8.0 DJM8.5 DJM9.0 DJM9.5 DJM10.0 DJM10.5 DJM11.0 DJM11.5 DJM12.0 DJM12.5 DJM13.0 – –

1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.3mm 3.5mm 4.0mm 4.5mm 5.0mm 5.5mm 6.0mm 6.5mm 7.0mm 7.5mm 8.0mm 8.5mm 9.0mm 9.5mm 10.0mm 10.5mm 11.0mm 11.5mm 12.0mm 12.5mm 13.0mm – –

Imperial Part Number 2831025 2831027 2831020 2831023 2831013 2831011 2831009 2831005 2831001 2830019 2830015 2830016 2830014 2830010 2830008 2830006 2830001 2829012 2829009 2829010 2829007 2829008 2829006 2829004 2829002 2829001 – –

Product Code

Size

Part Number

DJ1/32 DJ1/16 DJ5/64 DJ3/32 DJ7/64 DJ1/8 DJ9/64 DJ5/32 DJ1/64 DJ3/16 DJ13/64 DJ7/32 DJ15/64 DJ1/4 DR17/64 DJ9/32 DJ19/64 DJ5/16 DJ21/64 DJ11/32 DJ3/8 DJ25/64 DJ13/32 DJ27/64 DJ7/16 DJ15/32 DJ31/64 DJ1/2

1

⁄32” 1 ⁄16” 5 ⁄64” 3 ⁄32” 7 ⁄64” 1 ⁄8” 9 ⁄64” 5 ⁄32” 11 ⁄64” 3 ⁄16” 13 ⁄64” 7 ⁄32” 15 ⁄64” 1 ⁄4” 17 ⁄64” 9 ⁄32” 19 ⁄64” 5 ⁄16” 21 ⁄64” 11 ⁄32” 3 ⁄8” 25 ⁄64” 13 ⁄32” 27 ⁄64” 7 ⁄16” 15 ⁄32” 31 ⁄64” 1 ⁄2”

2839018 2839015 2839013 2839011 2839009 2839007 2839005 2839003 2839001 2838021 2838019 2838017 2838015 2838013 2838011 2838009 2838007 2838005 2838003 2838001 2837017 2837015 2837013 2837011 2837009 2837005 2837003 2837001

Metric

Imperial

Product Code

Size

Part Number

Product Code

Size

Part Number

D1080100 D1080150 D1080200 D1080250 D1080300 D1080350 D1080400 D1080450 D1080500 D1080550 D1080600 D1080650 D1080700 D1080750 D1080800 D1080850 D1080900 D1080950 D1081000 D1081050 D1081100 D1081150 D1081200 D1081250 D1081300 – – –

1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm 4.5mm 5.0mm 5.5mm 6.0mm 6.5mm 7.0mm 7.5mm 8.0mm 8.5mm 9.0mm 9.5mm 10.0mm 10.5mm 11.0mm 11.5mm 12.0mm 12.5mm 13.0mm – – –

92810001 92810002 92810003 92810004 92810005 92810006 92810007 92810008 92810009 92810010 92810011 92810012 92810013 92810014 92810015 92810016 92810017 92810018 92810019 92810020 92810021 92810022 92810023 92810024 92810025 – – –

D1080159 D1080198 D1080238 D1080278 D1080318 D1080357 D1080397 D1080437 D1080476 D1080516 D1080556 D1080595 D1080635 D1080676 D1080714 D1080754 D1080794 D1080833 D1080913 D1080953 D1080992 D1081032 D1081072 D1081111 D1081151 D1081191 D1081231 D1081269

1

⁄16” 5 ⁄64” 3 ⁄32” 7 ⁄64” 1 ⁄8” 9 ⁄64” 5 ⁄32” 11 ⁄64” 3 ⁄16” 13 ⁄64” 7 ⁄32” 15 ⁄64” 1 ⁄4” 17 ⁄64” 9 ⁄32” 19 ⁄64” 5 ⁄16” 21 ⁄64” 23 ⁄64” 3 ⁄8” 25 ⁄64” 13 ⁄32” 27 ⁄64” 7 ⁄16” 29 ⁄64” 15 ⁄32” 31 ⁄64” 1 ⁄2”

2839016 2839014 2839012 2839010 2839008 2839006 2839004 2839002 2838022 2838020 2838018 2838016 2838014 2838012 2838010 2838008 2838006 2838004 2837020 2837018 2837016 2837014 2837012 2837010 2837008 2837006 2837004 2837002

D

id you know that the length of the flute is generally between 9 and 14 times the diameter of the drill bit, depending on the drill bit size?

E.g. a 1⁄2” (12.7mm) diameter drill will be able to drill a hole 41⁄2” (114.3mm) deep, since it is 9 times the diameter in length.

12.7 mm

Do You know the drill? 9x

A 1⁄8” (3.2mm) diameter drill can drill a hole 15⁄8” (41.3mm) deep, since it is 13 times the diameter in flute length.

114. 3mm

266

The little things, but not every thing. No matter what your thing, get it @ ATOM


Jobber Drills

5

Jobber Drills – Black • 118° web thinned point reduces the amount of thrust required • Precision engineered parallel shank for accurate hole size • Made from M2 High Speed Steel (HSS) offering the best combination of strength, heat and wear resistance • Steam oxide finish prevents chip build-up on the cutting edges and reduces cutting friction, especially in low carbon steels • Blue surface finish for ferrous applications • More sizes available upon request

Product Code

Size

Part Number

Product Code

Size

Part Number

Product Code

Size

Part Number

Product Code

Size

Part Number

0.40mm 0.45mm 0.50mm 0.55mm 0.60mm 0.65mm 0.70mm 0.75mm 0.80mm 0.85mm 0.90mm 0.95mm 1.00mm 1.05mm 1.10mm 1.15mm 1.20mm 1.25mm 1.30mm 1.35mm 1.40mm 1.45mm 1.50mm 1.55mm 1.60mm 1.65mm 1.70mm 1.75mm 1.80mm 1.85mm 1.90mm 1.95mm 2.00mm 2.05mm 2.10mm 2.15mm 2.20mm 2.25mm 2.30mm 2.35mm 2.40mm 2.45mm

81004211 30006722 30006723 92808070 92808072 92808073 30006724 92808074 30006725 92800105 30006727 92808075 30006778 36003240 92808000 36003241 30006730 92808001 92808002 36003242 30006731 92808003 30006732 92808004 30006734 30006733 92808005 92808006 30006737 30006736 30006738 92808007 30006798 92808008 30006779 92808009 30006781 92808010 92808011 30006782 92808012 92808013

D1020250 D1020255 D1020260 D1020265 D1020270 D1020275 D1020280 D1020285 D1020290 D1020295 D1020300 D1010305 D1020310 D1020320 D1020330 D1020340 D1020350 D1020360 D1020370 D1020380 D1020390 D1020400 D1020410 D1020420 D1020430 D1020440 D1020450 D1020460 D1020470 D1020480 D1020490 D1020500 D1020510 D1020520 D1020530 D1020540 D1020550 D1020560 D1020570 D1020580 D1020590 D1020600

2.50mm 2.55mm 2.60mm 2.65mm 2.70mm 2.75mm 2.80mm 2.85mm 2.90mm 2.95mm 3.00mm 3.05mm 3.10mm 3.20mm 3.30mm 3.40mm 3.50mm 3.60mm 3.70mm 3.80mm 3.90mm 4.00mm 4.10mm 4.20mm 4.30mm 4.40mm 4.50mm 4.60mm 4.70mm 4.80mm 4.90mm 5.00mm 5.10mm 5.20mm 5.30mm 5.40mm 5.50mm 5.60mm 5.70mm 5.80mm 5.90mm 6.00mm

30006784 30006783 30006785 30006786 30006788 92808014 30006790 92808015 30006791 30006792 30006813 2808025 30006799 30006800 30006801 30006802 30006803 30006804 30006805 30006806 30006807 30006823 30006814 30006815 30006816 30006817 30006818 30006819 30006820 30006821 30006822 30006836 30006824 30006825 30006826 30006827 30006828 30006829 30006830 30006831 92808017 30006846

D1020610 D1020620 D1020630 D1020640 D1020650 D1020660 D1020670 D1020680 D1020690 D1020700 D1020710 D1020720 D1020730 D1020740 D1020750 D1020760 D1020770 D1020780 D1020790 D1020800 D1020810 D1020820 D1020830 D1020840 D1020850 D1020860 D1020870 D1020880 D1020890 D1020900 D1020910 D1020920 D1020930 D1020940 D1020950 D1020960 D1020970 D1020980 D1020990 D1021000 D1021010 D1021020

6.10mm 6.20mm 6.30mm 6.40mm 6.50mm 6.60mm 6.70mm 6.80mm 6.90mm 7.00mm 7.10mm 7.20mm 7.30mm 7.40mm 7.50mm 7.60mm 7.70mm 7.80mm 7.90mm 8.00mm 8.10mm 8.20mm 8.30mm 8.40mm 8.50mm 8.60mm 8.70mm 8.80mm 8.90mm 9.00mm 9.10mm 9.20mm 9.30mm 9.40mm 9.50mm 9.60mm 9.70mm 9.80mm 9.90mm 10.00mm 10.10mm 10.20mm

30006837 92808018 92808019 30006840 30006841 30006842 30006843 30006844 30006845 30006857 30006847 30006848 92808021 30006849 30006850 30006851 92808023 30006852 30006853 30006867 30006858 30006859 30006860 30006861 30006862 30006863 30006864 30006865 30006866 30006877 30006868 92808025 30006869 92808026 30006871 30006872 92808027 30006873 92808029 92808030 92808031 30006745

D1021030 D1021040 D1021050 D1021060 D1021070 D1021080 D1021090 D1021100 D1021110 D1021120 D1021130 D1021140 D1021150 D1021160 D1021170 D1021180 D1021190 D1021200 D1021210 D1021220 D1021230 D1021240 D1021250 D1021260 D1021270 D1021280 D1021290 D1021300 D1021320 D1021350 D1021380 D1021400 D1021425 D1021450 D1021475 D1021500 D1021525 D1021550 D1021575 D1021600 – –

10.30mm 10.40mm 10.50mm 10.60mm 10.70mm 10.80mm 10.90mm 11.00mm 11.10mm 11.20mm 11.30mm 11.40mm 11.50mm 11.60mm 11.70mm 11.80mm 11.90mm 12.00mm 12.10mm 12.20mm 12.30mm 12.40mm 12.50mm 12.60mm 12.70mm 12.80mm 12.90mm 13.00mm 13.20mm 13.50mm 13.80mm 14.00mm 14.25mm 14.50mm 14.75mm 15.00mm 15.25mm 15.50mm 15.75mm 16.00mm – –

30006746 92808032 30006747 30006748 30006749 30006750 92808034 30006758 92808035 30006752 92808036 92808037 30006753 30006754 92808039 30006755 92808040 30006763 30006759 30006760 92808041 92808042 30006761 92808043 92808044 92808045 92808046 30006770 30006764 30006766 30006767 30006771 92808051 92808052 92808054 30006774 92808056 92808058 92808059 30006775 – –

⁄64” ⁄32” 3 ⁄64” 1 ⁄16” 5 ⁄64” 3 ⁄32” 7 ⁄64” 1 ⁄8” 9 ⁄64”

2839019 30006741 30006810 30006739 30006835 30006809 30006856 30006744 30006876

D1020397 D1020437 D1020476 D1020516 D1020556 D1020595 D1020635 D1020676 D1020714

5

⁄32” ⁄64 ” 3 ⁄16” 13 ⁄64” 7 ⁄32” 15 ⁄64” 1 ⁄4” 17 ⁄64” 9 ⁄32”

30006834 30006757 30006808 30006769 30006855 30006773 30006742 30006776 30006875

D1020754 D1020794 D1020833 D1020873 D1020913 D1020953 D1020992 D1021032 D1021072

19

⁄64” ⁄16” 21 ⁄64” 11 ⁄32” 23 ⁄64” 3 ⁄8” 25 ⁄64” 13 ⁄32” 27 ⁄64”

30006777 30006833 30006793 30006756 30006794 30006811 30006795 30006768 30006796

D1021111 D1021151 D1021191 D1021231 D1021269 D1021429 D1021588 D1021667 D1021746

7

⁄16” ⁄64” 15 ⁄32” 31 ⁄64” 1 ⁄2” 9 ⁄16” 5 ⁄8” 21 ⁄32” 11 ⁄16”

30006854 30006797 30006772 30006812 30006740 30006874 92808060 92808062 92808064

Metric D1010040 D1010045 D1010050 D1010055 D1010060 D1010065 D1010070 D1010075 D1010080 D1010085 D1010090 D1010095 D1020100 D1020105 D1020110 D1020115 D1020120 D1020125 D1020130 D1020135 D1020140 D1020145 D1020150 D1020155 D1020160 D1020165 D1020170 D1020175 D1020180 D1020185 D1020190 D1020195 D1020200 D1020205 D1020210 D1020215 D1020220 D1020225 D1020230 D1020235 D1020240 D1020245 Imperial D1010039 D1010079 D1020119 D1020159 D1020198 D1020238 D1020278 D1020318 D1020357

1 1

11

5

1800 999 024 | atom.com.au | getit@atom.com.au

29

267


Job Drill Sets

5

Jobber Drill Sets – Metric, Bright & Coated

JOBBER DRILL SETS – BRIGHT & TiN

• High speed steel (HSS) • Available in 6 different finishes Bright Finish: • Bright finish for general purpose applications Blue Finish: • Blue surface finish for reduced friction and chip build up in ferrous materials • First choice when drilling ferrous materials TiNite: • For high performance drilling and tool life up to 6 times as long in tough alloy steels

Everyday Low Price

• High speed steel (HSS) • 0.05mm step • Uncoated and with TiN (titanium nitride) coating

Description 25 Piece Set – Metric 29 Piece Set – Imperial

92888002

Bright

TiN Coating

Range

Part Number

Part Number

1 – 13mm ⁄16” – 1⁄2”

92280027 92280029

34210001 92880004

1

Bright Finish

TiNite Tip: • For improved abrasive and heat resistance and TiN coated tip for improved life Cobalt: • Industrial quality with thick core for drilling materials that have high hardness and tensile strength Viper+: • Industrial quality TiAIN coated for tough materials, increased tool life and wear resistance

36002653

Blue Finish

TiNite

234916

TiNite Tip

Cobalt

Viper+

Jobber Drill Sets – Imperial, Bright & Coated • High speed steel • Available in five different finishes

Product Code Bright Finish D101SM1 D101SM2 D101MTLSM2 D101SM3 D101MTLSM3 D101SM8

Bright Finish Product Code Bright Finish D101S1 D101S2 D101MTLS2 D101S3 D101MTLS3 D101S30 D101S31 Blue Finish D102S1 D102S2 D102S3 D102S8 TiNite D103S3 Cobalt D109S2 D109S3 Viper+ D179S2 D179S3

268

Blue Finish

TiNite

Cobalt

Viper+

Range

No. Drills

Case

Part Number

⁄16” – 1⁄4” x 1⁄64” 1 ⁄16” – 3⁄8” x 1⁄64” 1 ⁄16” – 3⁄8” x 1⁄64” 1 ⁄16” – 1⁄2” x 1⁄64” 1 ⁄16” – 1⁄2” x 1⁄64” #1 – #60 Wire Gauge #61 – #80 Wire Gauge

13 21 21 29 29 60 20

ABS ABS Metal ABS Metal Metal ABS

88820890 92888014 36002655 92888015 36002656 2807012 2807013

⁄16” – 1⁄4” x 1⁄64” ⁄16” – 3⁄8” x 1⁄64” 1 ⁄16” – 1⁄2” x 1⁄64” Refill Kit: 1⁄16” – 1⁄2” x 1⁄64”

13 21 29 29

ABS ABS ABS Cardboard

92888020 2840001 2840002 92888022

⁄16” – 1⁄2” x 1⁄64”

29

ABS

30006943

⁄16” – 3⁄8” x 1⁄64” ⁄16” – 1⁄2” x 1⁄64”

21 29

ABS ABS

92888025 2840005

⁄16” – 3⁄8” x 1⁄64” ⁄16” – 1⁄2” x 1⁄64”

21 29

ABS ABS

36002657 36002658

1

1 1

1

1 1

1 1

D101SM30 D101SM41 Blue Finish D102SM1 D102SM2 D102SM3 D102SM8 D102SM30 D102SM41 D102SM99 TiNite D103SM3 TiNite Tip 150B0WS13 150B0WS2M 150B0WS3M Cobalt D109SM2 D109SM3 Viper+ D179SM2 D179SM3

Range

No. Drills

Case

Part Number

1.0 – 6.5 x 0.5mm 1.0 – 10.0 x 0.5mm 1.0 – 10.0 x 0.5mm 1.0 – 13.0 x 0.5mm 1.0 – 13.0 x 0.5mm Refill Kit: 1.0 – 3.0 x 0.25mm, 3.5 – 13.0 x 0.5mm 1.0 – 5.9 x 0.1mm 6.0 – 10.0 x 0.1mm

12 19 19 25 25

ABS ABS Metal ABS Metal

92888000 92888001 35000867 92888002 238313

29

Quad Pack

92888004

50 41

Metal Metal

92888006 92888007

1.0 – 6.5 x 0.5mm 1.0 – 10.0 x 0.5mm 1.0 – 13.0 x 0.5mm Refill Kit: 1.0 – 3.0 x 0.25mm, 3.5 – 13.0 x 0.5mm 1.0 – 5.9 x 0.1mm 6.0 – 10.0 x 0.1mm 1.0 – 10.0 x 0.1mm (Plus 10.5, 10.9, 11.0, 11.5, 11.9, 12.0, 12.5, 12.9, 13.0mm)

12 19 25

ABS ABS ABS

92880009 2832001 2832002

29

Quad Pack

92888009

50 41

Metal Metal

92888010 92888011

100

ABS Stand

92880003

1.0 – 13.0 x 0.5mm

25

ABS

36003637

1.5 – 6.5 x 0.5mm 1.0 – 10.0 x 0.5mm 1.0 – 13.0 x 0.5mm

13 19 25

ABS ABS ABS

36002651 36002652 36002653

1.0 – 10.0 x 0.5mm 1.0 – 13.0 x 0.5mm

19 25

ABS ABS

92888013 92180027

1.0 – 10.0 x 0.5mm 1.0 – 13.0 x 0.5mm

19 25

ABS ABS

36002654 234916

The little things, but not every thing. No matter what your thing, get it @ ATOM


Jobber Drills – Long Reach & Reduced Shank Jobber Drills – Long Shank

Reduced Shank Drills – Bright

• M2 high speed steel (HSS) with blue surface finish for ferrous applications • Also available in other finishes including Bright and TiNite coated • Overall length: 108 – 203mm

• • • •

Product Code Metric D1100200 D1100250 D1100300 D1100350 D1100400 D1100450 D1100500 D1100550 D1100600 D1100650 D1100700 D1100750 Imperial D1100159 D1100198 D1100238 D1100278 D1100318 D1100357 D1100397 D1100437 D1100476 D1100516 D1100556 D1100595 D1100635 D1100676 D1100714

Size

Part Number

Product Code

Size

Part Number

2.0mm 2.5mm 3.0mm 3.5mm 4.0mm 4.5mm 5.0mm 5.5mm 6.0mm 6.5mm 7.0mm 7.5mm

92808366 92808367 92808369 92808371 92808372 92808373 88890812 92808376 92800072 92800021 92808377 92808379

D1100800 D1100850 D1100900 D1100950 D1101000 D1101050 D1101100 D1101150 D1101200 D1101250 D1101300 –

8.0mm 8.5mm 9.0mm 9.5mm 10.0mm 10.5mm 11.0mm 11.5mm 12.0mm 12.5mm 13.0mm –

92808383 92808385 92808388 92808391 92808393 92808395 92808397 92800042 92808400 92808401 92800001 –

⁄16” ⁄64” 3 ⁄32” 7 ⁄64” 1 ⁄8” 9 ⁄64” 5 ⁄32” 11 ⁄64” 3 ⁄16” 13 ⁄64” 7 ⁄32” 15 ⁄64” 1 ⁄4” 17 ⁄64” 9 ⁄32” 5

92808364 92808365 92800023 92808368 92800025 92800026 92800027 92800028 92800029 92808374 92800031 92800032 92800033 92800045 92808378

D1100754 D1100794 D1100833 D1100873 D1100913 D1100953 D1100992 D1101032 D1101072 D1101111 D1101151 D1101191 D1101231 D1101269 –

⁄64” ⁄16” 21 ⁄64” 11 ⁄32” 23 ⁄64” 3 ⁄8” 25 ⁄64” 13 ⁄32” 27 ⁄64” 7 ⁄16” 29 ⁄64” 15 ⁄32” 31 ⁄64” 1 ⁄2” –

92808380 92808382 92808384 92808386 92808389 92800050 92808392 92808394 92808396 92800052 92808398 92808399 92800077 92808402 –

19 5

Jobber Drills – Imperial, Extra Long Shank • • • •

Designed to increase the drilling capacity of drill chucks High speed steel (HSS) Individually packed ½” shank

Product Code

1

For drilling deep holes in long reach applications M2 high speed steel (HSS) Bright finish Overall length: 300mm

Product Code

Size

Part Number

Product Code

Size

Part Number

D1870318 D1870476 D1870635 D1870794

1

⁄8” 3 ⁄16” 1 ⁄4” 5 ⁄16”

92850029 92800093 92908080 92908079

D1870953 D1871111 D1871269 –

⁄8” 7 ⁄16” 1 ⁄2” –

79916938 92800092 92908081 –

3

Get it right the first time, measure twice, drill once. Use ATOM’s drill bit gauge on page 534

5

Metric DRS1/2-M13.5 DRS1/2-M14.0 DRS1/2-M14.5 DRS1/2-M15.0 DRS1/2-M16.0 DRS1/2-M16.5 DRS1/2-M17.0 DRS1/2-M17.5 DRS1/2-M18.0 Imperial DRS1/2-9/16 DRS1/2-11/16 DRS1/2-5/8

Size

Part Number

Product Code

Size

13.5mm 14.0mm 14.5mm 15.0mm 16.0mm 16.5mm 17.0mm 17.5mm 18.0mm

2816010 2816009 2816008 2816007 2816005 2816004 2816003 2816002 2816001

DRS1/2-M18.5 DRS1/2-M19.0 DRS1/2-M20.0 DRS1/2-M21.0 DRS1/2-M22.0 DRS1/2-M23.0 DRS1/2-M24.0 DRS1/2-M25.0 DRS1/2-M26.0

18.5mm 19.0mm 20.0mm 21.0mm 22.0mm 23.0mm 24.0mm 25.0mm 26.0mm

2815011 2815010 2815008 2815007 2815006 2815005 2815004 2815003 2815002

⁄16” ⁄16” 5 ⁄8”

2824008 2823011 2824004

DRS1/2-3/4 DRS1/2-7/8 –

⁄4” ⁄8” –

2823007 2822010 –

9

11

3 7

Part Number

Reduced Shank Drills – Bright • High speed steel (HSS) • Individually packed

Product Code

Size

Metric – 12.5mm Shank D1881350 13.5mm D1881400 14.0mm D1881450 14.5mm D1881500 15.0mm D1881550 15.5mm D1881600 16.0mm D1881650 16.5mm D1881700 17.0mm D1881750 17.5mm D1881800 18.0mm D1881850 18.5mm Imperial – ½” Shank 33 D1881310 ⁄64” 17 D1881349 ⁄32” 35 D1881389 ⁄64” 9 D1881429 ⁄16” 37 D1881468 ⁄64” 19 D1881508 ⁄32” 39 D1881548 ⁄64” 5 D1881588 ⁄8” 41 D1881627 ⁄64” 21 D1881667 ⁄32” 43 D1881707 ⁄64” 11 D1881746 ⁄16” 45 D1881786 ⁄64” 23 D1881826 ⁄32” 47 D1881865 ⁄64” 3 D1881905 ⁄4” 49 D1881945 ⁄64”

Part Number

Product Code

Size

Part Number

30006901 30006900 30006899 30006898 2816006 30006896 30006895 30006894 30006893 30006892 30006891

D1881900 D1881950 D1882000 D1882100 D1882200 D1882300 D1882400 D1882500 D1882600 D1882800 D1883000

19.0mm 19.5mm 20.0mm 21.0mm 22.0mm 23.0mm 24.0mm 25.0mm 26.0mm 28.0mm 30.0mm

30006890 2815009 30006888 30006887 30006886 30006885 30006884 30006883 30006882 2814014 2814012

2824011 2824010 2824009 30006936 2824007 2824006 2824005 30006932 2824003 2824002 2824001 30006928 2823010 2823009 2823008 30006924 2823006

D1881984 D1882024 D1882064 D1882143 D1882183 D1882223 D1882262 D1882302 D1882342 D1882381 D1882421 D1882461 D1882540 D1882699 D1882858 D1883016 D1883175

⁄32” ⁄64” 13 ⁄16” 27 ⁄32” 55 ⁄64” 7 ⁄8” 57 ⁄64” 29 ⁄32” 59 ⁄64” 15 ⁄16” 61 ⁄64” 31 ⁄32” 1” 11⁄16” 11⁄8” 13⁄16” 11⁄4”

2823005 2823004 2823003 2823001 2822011 30006916 2822009 2822008 2822007 2822006 2822005 2822004 2822002 2821010 2821008 2821006 2821005

1800 999 024 | atom.com.au | getit@atom.com.au

25 51

269


Reduced Shank Drill Sets

5

Reduced Shank Drill Sets – 8 Piece, Bright • M2 high speed steel (HSS), 100% flute length • 118° point angle

QUALITY GUARANTEED 60014658 Product Code D1171 D1181

Sets 8 Piece Set – Metric – 13mm Shank 8 Piece Set – Imperial – 1⁄2” Shank

Range 13 – 25mm 9 ⁄16” – 1”

Part Number 60014657 60014658

Reduced Shank Drill Sets – 4-16 Piece, Bright

PREMIUM DRILLING

• Designed to increase the drilling capacity of drill chucks • Suitable for slow speed (<350rpm) large scale boring • Reduced shanks suit 13mm drill chucks • All drills have a 152mm overall length and 86mm flute length

& CUTTING TOOLS FOR THE HANDYMAN THROUGH TO THE PROFESSIONAL TRADESPERSON 60017116

Product Code

Sizes

Metric – 12.5mm Shank D188RS4M 16, 18, 22, 25mm D188SM8R 14, 15, 16, 16.5, 18, 20, 22, 25mm Imperial – ½” Shank 5 D188RS4 ⁄8”, 3⁄4”, 7⁄8”, 1” 9 D188S8R ⁄16”, 5⁄8”, 11⁄16”, 3⁄4”, 13⁄16”, 7⁄8”, 15⁄16”, 1” 17 ⁄32”, 9⁄16”, 19⁄32”, 5⁄8”, 21⁄32”, 11⁄16”, 23⁄32”, 3⁄4”, D188RS16 25 ⁄32”, 13⁄16”, 27⁄32”, 7⁄8”, 29⁄32”, 15⁄16”, 31⁄32”, 1”

No. Drills Case

Part Number

4 8

Foam Pack Plastic

92888027 92888028

4 8

Foam Pack Plastic

92888026 92880001

16

Plastic

60017116

Get drilling with our range of electric drills on page 309

Pneumatic drills starting from page 326 Know what your drilling into with wall scanners on page 445

270

With years of experience across numerous markets, Qcut represents precision and durability in cutting tools and accessories. Developed from an engineering perspective – by machinists for machinists, Qcut products are manufactured with leading material and technology in state-of-the-art facilities to ensure lasting quality and precision you’d expect from a leading product.

EXCLUSIVE TO

The little things, but not every thing. No matter what your thing, get it @ ATOM


Taper Shank Drills, Drill Sets & Sleeves

5

Taper Shank Drills – Black • High speed steel (HSS) • Blue ferrous • Also available in cobalt and in extra long sizes

Product Code

Size

No. 1 Morse – Metric D1150600 6.0mm D1150650 6.5mm D1150700 7.0mm D1150750 7.5mm D1150800 8.0mm D1150850 8.5mm D1150900 9.0mm D1150950 9.5mm D1151000 10.0mm No. 1 Morse – Imperial 3 D1150476 ⁄16” 13 D1150516 ⁄64” 7 D1150556 ⁄32” 15 D1150595 ⁄64” 1 D1150635 ⁄4” 17 D1150676 ⁄64” 9 D1150714 ⁄32” 19 D1150754 ⁄64” 5 D1150794 ⁄16” 21 D1150833 ⁄64” 11 D1150873 ⁄32” 23 D1150913 ⁄64” No. 2 Morse – Metric D1151450 14.5mm D1151500 15.0mm D1151550 15.5mm D1151600 16.0mm D1151650 16.5mm D1151700 17.0mm D1151750 17.5mm D1151800 18.0mm D1151850 18.5mm No. 2 Morse – Imperial 9 D1151429 ⁄16” 37 D1151468 ⁄64” 19 D1151508 ⁄32” 39 D1151548 ⁄64” 5 D1151588 ⁄8” 41 D1151627 ⁄64” 21 D1151667 ⁄32” 43 D1151707 ⁄64” 11 D1151746 ⁄16” 45 D1151786 ⁄64” 23 D1151826 ⁄32” 47 D1151865 ⁄64”

Part Number

Product Code

Size

2809001 2809002 2809003 2809004 2809005 2809006 2809007 2809008 2809009

D1151050 D1151100 D1151150 D1151200 D1151250 D1151300 D1151350 D1151400 –

10.5mm 11.0mm 11.5mm 12.0mm 12.5mm 13.0mm 13.5mm 14.0mm –

2809010 2809011 2809012 2809013 2809014 2809015 2809016 2809017 –

2801001 2801002 2801003 2801004 2801005 2801006 2801007 2801008 2801009 2801010 2801011 2801012

D1150953 D1150992 D1151032 D1151072 D1151111 D1151151 D1151191 D1151231 D1151269 D1151310 D1151349 D1151389

3

⁄8” ⁄64” 13 ⁄32” 27 ⁄64” 7 ⁄16” 29 ⁄64” 15 ⁄32” 31 ⁄64” 1 ⁄2” 33 ⁄64” 17 ⁄32” 35 ⁄64”

2801013 2801014 2801015 2801016 2801017 2801018 2801019 2801020 2801021 2801022 2802001 2802002

2809018 2809019 2809020 2809021 2809022 2810001 2810002 2810003 2810004

D1151900 D1151950 D1152000 D1152050 D1152100 D1152150 D1152200 D1152250 D1152300

19.0mm 19.5mm 20.0mm 20.5mm 21.0mm 21.5mm 22.0mm 22.5mm 23.0mm

2810005 2810006 2810007 2810008 2810009 2810010 2810011 2810012 2810013

2802003 2802004 2802005 2802006 2802007 2802008 2802009 2802010 2802011 2802012 2802013 2802014

D1151905 D1151945 D1151984 D1152024 D1152064 D1152103 D1152143 D1152183 D1152223 D1152262 D1152302 –

⁄4” ⁄64” 25 ⁄32” 51 ⁄64” 13 ⁄16” 53 ⁄64” 27 ⁄32” 55 ⁄64” 7 ⁄8” 57 ⁄64” 29 ⁄32” –

2802015 2802016 2803001 2803002 2803003 2803004 2803005 2803006 2803007 2803008 2803009 –

Taper Shank Drill Set – 10 Piece, Metric, Bright D122 • Industrial drill set • 100% HSS flute length Includes: • 10 x drills (mm) – 14.5, 15, 16, 17, 18, 19, 20, 21, 22 & 23

60014665

Product Code

25

3

49

Part Number

Size

No. 3 Morse – Metric D1152350 23.5mm D1152400 24.0mm D1152450 24.5mm D1152500 25.0mm D1152550 25.5mm D1152600 26.0mm D1152700 27.0mm No. 3 Morse – Imperial 59 D1152342 ⁄64” 15 D1152381 ⁄16” 61 D1152421 ⁄64” 31 D1152461 ⁄32” 63 D1152501 ⁄64” D1152540 1” D1152580 11⁄64” D1152619 11⁄32” D1152659 13⁄64” D1152699 11⁄16” D1152738 15⁄64” No. 4 Morse – Metric D1153200 32.0mm D1153250 32.5mm D1153300 33.0mm D1153350 33.5mm D1153400 34.0mm D1153500 35.0mm D1153550 35.5mm D1153600 36.0mm D1153700 37.0mm No. 4 Morse – Imperial D1153254 19⁄32” D1153294 119⁄64” D1153334 15⁄16” D1153373 121⁄64” D1153413 111⁄32” D1153453 123⁄64” D1153493 13⁄8” D1153532 125⁄64” D1153572 113⁄32” D1153612 127⁄64” D1153651 17⁄16” D1153691 129⁄64” D1153731 115⁄32” D1153770 131⁄64” D1153810 11⁄2” D1153889 117⁄32” No. 5 Morse – Imperial D1155239 21⁄16” D1155398 21⁄8” D1156033 23⁄8”

Part Number

Product Code

Size

Part Number

2810014 2810015 2810016 2811001 88890745 2811002 2811003

D1152800 D1152850 D1152900 D1153000 D1153050 D1153100 D1153150

28.0mm 28.5mm 29.0mm 30.0mm 30.5mm 31.0mm 31.5mm

2811004 92858011 2811005 2811006 88890606 2811007 92858013

2803010 2803011 2803012 2803013 2803014 2803015 2803016 2803017 2804001 2804002 2804003

D1152778 D1152818 D1152858 D1152897 D1152937 D1152977 D1153016 D1153056 D1153096 D1153135 D1153175

13⁄32” 17⁄64” 11⁄8” 19⁄64” 15⁄32” 111⁄64” 13⁄16” 113⁄64” 17⁄32” 115⁄64” 11⁄4”

2804004 2804005 2804006 2804007 2804008 2804009 2804010 2804011 2804012 2804013 2804014

2811008 88890605 2811009 92850026 2811010 2811011 92850027 2811012 2811013

D1153750 D1153800 D1153900 D1154000 D1154200 D1154300 D1154700 D1154850 D1154900

37.5mm 38.0mm 39.0mm 40.0mm 42.0mm 43.0mm 47.0mm 48.5mm 49.0mm

88837886 2811014 2811015 2811016 88821714 92850021 92850028 92850035 92850033

2804016 92850001 2804017 92850002 2804018 92850003 2804019 92850004 2804020 92850005 2804021 92850006 92850019 92850007 2804022 2804023

D1153969 D1154048 D1154128 D1154207 D1154286 D1154366 D1154445 D1154524 D1154604 D1154683 D1154763 D1154842 D1154921 D1155001 D1155080 –

19⁄16” 119⁄32” 15⁄8” 121⁄32” 111⁄16” 123⁄32” 13⁄4” 125⁄32” 113⁄16” 127⁄32” 17⁄8” 129⁄32” 115⁄16” 131⁄32” 2” –

92850020 92850009 88888155 92850010 88888153 92850011 88898251 92850012 92850013 92850014 92850015 92850016 92850017 92850018 88897748 –

92850024 92850036 88809874

D1156350 D1156985 D1157620

21⁄2” 23⁄4” 3”

92850030 92858041 92850032

Taper Shank Drill Sleeves • Used for reduction or sizing up • Other sizes available

Size

Part Number

Size

Part Number

1–2 1–3 1–4 1–5 2–4 2–5 3–2

3013001 3013002 3013004 3013007 3013005 3013008 3013003

3–4 3–5 3–6 4–5 4–6 5–6 –

3013006 3013009 3013011 3013010 3013012 3013013 –

1800 999 024 | atom.com.au | getit@atom.com.au

271


Masonry Drills

5

Masonry Drills – Single & Double Brick

Masonry Drills – 2 Tungsten Carbide Cutting Heads

CYL-3

SDS Plus

• Heavy duty drill bit • Suitable for drilling holes in concrete, masonry, limestone, natural and artificial stone

Product Code

Shank Diameter

Working Length

Overall Length

Part Number

3.0mm 4.0mm 4.5mm 5.0mm 5.0mm 5.5mm 5.5mm 6.0mm 6.0mm 6.5mm 6.5mm 7.0mm 7.0mm 8.0mm 8.0mm 9.0mm 10.0mm 10.0mm 10.0mm 11.0mm 12.0mm 12.0mm 13.0mm 13.0mm 14.0mm 16.0mm 20.0mm 25.0mm

40mm 40mm 40mm 50mm 90mm 50mm 90mm 60mm 90mm 60mm 90mm 60mm 90mm 80mm 90mm 80mm 80mm 90mm 250mm 90mm 90mm 150mm 90mm 250mm 90mm 100mm 100mm 100mm

70mm 75mm 85mm 85mm 150mm 85mm 150mm 100mm 150mm 100mm 150mm 100mm 150mm 120mm 150mm 120mm 120mm 150mm 300mm 150mm 150mm 200mm 150mm 300mm 150mm 160mm 160mm 160mm

79011622 79011623 92270339 79011624 92270340 79011630 92270341 79011625 92270342 79011631 36003463 79011626 92270344 79011627 92270345 79011628 79011629 79011640 92270347 79011636 79011632 92828330 79011633 36003461 79011634 79011635 79011484 36003462

6.5mm 8.0mm 10.0mm 16.0mm 20.0mm 22.0mm

350mm 350mm 350mm 350mm 350mm 350mm

400mm 400mm 400mm 400mm 400mm 400mm

92270343 92270346 36003458 92270348 36003459 36003460

• Two tungsten carbide cutting heads, four flute design • Suitable for concrete, reinforced concrete, granite and brick • Highly durable tip with aggressive design and diameter-optimised brazing to increase the hardness

• Active self-centering tip for improved accuracy • Carbide relief grooves help move the dust faster to the flute and prevent clogging • PGM certified to ensure the bit drills to the exact tolerance and diameter

Single Brick 2.608.680.700 2.608.680.701 2.608.680.711 2.608.680.702 2.608.680.729 2.608.680.712 2.608.680.730 2.608.680.703 2.608.680.731 2.608.680.713 2.608.680.733 2.608.680.705 2.608.680.734 2.608.680.706 2.608.680.735 2.608.680.708 2.608.680.709 2.608.680.737 2.608.597.685 2.608.680.723 2.608.680.714 2.608.680.739 2.608.680.715 2.608.597.687 2.608.680.716 2.608.680.718 2.608.597.673 2.608.597.675 Double Brick 2.608.597.689 2.608.597.690 2.608.597.691 2.608.597.694 2.608.597.696 2.608.597.697

Masonry Drill Sets – 8 Piece, 2 Tungsten Carbide Cutting Heads 2.608.832.724 – SDS Plus 3 • • • •

Two tungsten carbide cutting heads Suitable for concrete, granite and brick Highly durable tungsten carbide tip Aggressive 2 cutter design with diameteroptimised brazing to increase the hardness • Active self-centering tip for improved accuracy • Four flute turbo design for fast removal of drilling dust • PGM certified to ensure the bit drills to the exact tolerance and diameter Includes: • 5 x 50mm, 5.5 x 50mm, 6 x 50mm, 6.5 x 50mm, 6.5 x 100mm, 8 x 100mm, 10 x 100mm & 12 x 100mm

36003571

272

Product Code

Diameter

Working Length

Overall Length

Part Number

1.618.596.164 1.618.596.189 1.618.596.165 2.608.596.146 2.608.597.775 1.618.596.166 1.618.596.167 2.608.596.115 1.618.596.168 1.618.596.169 2.608.597.778 2.608.597.779 1.618.596.171 1.618.596.172 1.618.596.173 1.618.596.174 1.618.596.264 2.608.596.116 1.618.596.176 1.618.596.177 1.618.596.265 1.618.596.178 1.618.596.315 1.618.596.267 1.618.596.181 1.618.596.268 1.618.596.182 2.608.597.782 1.618.596.269 1.618.596.224 1.618.596.318 1.618.596.184 1.618.596.185 1.618.596.270 1.618.596.186 1.618.596.271 2.608.596.118 1.618.596.188 2.608.596.185 2.608.596.186 1.618.596.259 1.618.596.204 1.618.596.319 1.618.596.260 1.618.596.207 1.618.596.262 1.618.596.263 1.618.596.232 1.618.596.233 1.618.596.236 1.618.596.237 1.618.596.238 1.618.596.239 1.618.596.240 1.618.596.241

5.0mm 5.0mm 5.5mm 5.5mm 5.5mm 6.0mm 6.0mm 6.0mm 6.5mm 6.5mm 6.5mm 6.5mm 7.0mm 8.0mm 8.0mm 8.0mm 8.0mm 8.0mm 10.0mm 10.0mm 10.0mm 10.0mm 10.0mm 10.0mm 12.0mm 12.0mm 12.0mm 12.0mm 12.0mm 12.0mm 13.0mm 13.0mm 14.0mm 14.0mm 14.0mm 14.0mm 14.0mm 15.0mm 16.0mm 16.0mm 16.0mm 18.0mm 18.0mm 18.0mm 20.0mm 20.0mm 20.0mm 22.0mm 22.0mm 24.0mm 24.0mm 25.0mm 25.0mm 26.0mm 26.0mm

50mm 100mm 50mm 100mm 150mm 50mm 100mm 150mm 50mm 100mm 150mm 200mm 100mm 50mm 100mm 150mm 200mm 400mm 50mm 100mm 150mm 200mm 250mm 400mm 100mm 150mm 200mm 250mm 400mm 550mm 150mm 200mm 100mm 150mm 200mm 250mm 400mm 200mm 150mm 250mm 400mm 150mm 250mm 400mm 150mm 250mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 190mm 390mm

110mm 160mm 110mm 160mm 210mm 110mm 160mm 210mm 110mm 160mm 210mm 260mm 160mm 110mm 160mm 210mm 260mm 460mm 110mm 160mm 210mm 260mm 310mm 460mm 160mm 210mm 260mm 310mm 460mm 610mm 210mm 260mm 160mm 210mm 260mm 310mm 460mm 260mm 210mm 310mm 460mm 200mm 300mm 450mm 200mm 300mm 450mm 250mm 450mm 250mm 450mm 250mm 450mm 250mm 450mm

79010895 79010913 79010896 79011434 79011485 79010897 79010898 79011431 79010899 79010900 79011486 79011487 79010901 79010902 79010903 79010904 79010930 79011432 92270351 79010905 79010931 79010906 79010938 79010933 79010907 79010934 79010908 79011488 79010935 79010915 79010939 79010909 79010910 79010936 79010911 79010937 79011433 79010912 79011436 92270352 79010925 92828308 79010940 79010926 79010914 79010928 79010929 79010917 79010918 79010919 79010920 79010921 79010922 79010923 79010924

The little things, but not every thing. No matter what your thing, get it @ ATOM


Masonry & Multi-Purpose Drills Masonry Drills – 4 Tungsten Carbide Cutting Heads

5

Masonry Drills – Diamond Core • State of the art diamond drill bits for professionals and frequent users D735 Core Bits: • Laser welded, high performance tools • Excellent free cutting performance and durability C420 Core Bits: • Self-dressing segments ensure excellent life

SDS Plus 7 • Four tungsten carbide cutting heads • Suitable for concrete, reinforced concrete, limestone and masonry • For use in rotary hammers with SDS-Plus holder

Product Code

Diameter

Working Length

Overall Length

Part Number

2.608.585.024 2.608.585.027 2.608.585.029 2.608.585.033 2.608.585.039 2.608.585.040 2.608.585.045 2.608.585.046 2.608.585.051 2.608.585.052

5.0mm 5.5mm 6.0mm 6.5mm 8.0mm 8.0mm 10.0mm 10.0mm 12.0mm 12.0mm

100mm 100mm 100mm 100mm 100mm 150mm 100mm 150mm 150mm 200mm

160mm 160mm 165mm 165mm 165mm 215mm 165mm 215mm 215mm 265mm

92270355 92270357 92270359 92270362 92270365 92270366 92270368 92270369 92270371 92270372

Masonry Drills – 4 Tungsten Carbide Cutting Heads

151956 234613

Product Code

Description

Size

Part Number

584436504 582005001 525356001 525356301 525356501

D735 Core Bit D735 Core Bit C420 Core Bit C420 Core Bit C420 Core Bit

22 x 450mm 45 x 450mm 77 x 450mm 102 x 450mm 115 x 450mm

151956 36001040 92828377 234613 92828372

Masonry & Multi-Purpose Drill Sets • Use CYL-3 and CYL-9 with drills and hammer drills • Use HEX-9 with impact drivers CYL-3: • Suitable for masonry, concrete, brick and stone CYL-9/HEX-9: • Suitable for wood, masonry, concrete, brick, ceramics, tiles, plastic, sheet metal and aluminium with or without hammer mode

36003615

SDS Max Drill • Four tungsten carbide cutting heads • Suitable for concrete, reinforced concrete, limestone and masonry • For use in rotary hammers with SDS-MAX holder

Product Code 2.608.680.727 2.608.589.529

Product Code

Diameter

Working Length

Overall Length

Part Number

2.608.586.738 2.608.586.739 2.608.586.744 2.608.586.745 2.608.586.751 2.608.586.752 2.608.586.758 2.608.586.759 2.608.586.765 2.608.586.766 2.608.586.770 2.608.586.771 2.608.586.775 2.608.586.776 2.608.586.777 2.608.586.778 2.608.586.782 2.608.586.783 2.608.586.784 2.608.586.785 2.608.586.790 2.608.586.791 2.608.586.792 2.608.586.796

12mm 12mm 14mm 14mm 16mm 16mm 18mm 18mm 20mm 20mm 22mm 22mm 24mm 24mm 25mm 25mm 26mm 26mm 28mm 28mm 30mm 32mm 32mm 35mm

200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 200mm 400mm 400mm 200mm 400mm 400mm

340mm 540mm 340mm 540mm 340mm 540mm 340mm 540mm 320mm 520mm 320mm 520mm 320mm 520mm 320mm 520mm 320mm 520mm 320mm 520mm 520mm 320mm 520mm 520mm

36003846 92270373 79010943 79010944 79010945 36003451 79010947 36003452 79010949 36003453 79010951 228937 36003454 79010954 79010955 36003455 92270375 92270376 36003456 79010957 36003457 92270378 79010959 92270379

Don’t forget your safety glasses. Get ‘em from page 20 ATOMise Taking Safety Seriously

2.608.589.530 2.607.010.543

Description 8 Piece CYL-3 Drill Bit Set – Includes: 3, 4, 5, 6, 7, 8, 9 & 10mm 3 Piece HEX-9 Drill Bit Set – Includes: 5, 6 & 8mm 5 Piece HEX-9 Drill Bit Set – Includes: 4, 5, 6, 6 & 8mm 7 Piece CYL-9 Drill Bit Set – Includes: 4, 5, 6, 6, 8, 10 & 12mm

Part Number 92270350 36003616 36003617 36003615

Multi-Purpose Drills • High performance multi-purpose drill bit • Suitable for wood, masonry, concrete, brick, ceramics, tiles, plastic, sheet metal and aluminium with or without hammer mode

Product Code

Shank Diameter

Working Length

CYL-9 Multi-Construction Drill Bits 2.608.596.050 4.0mm 40mm 2.608.596.051 5.0mm 50mm 2.608.596.052 5.5mm 50mm 2.608.596.060 6.0mm 90mm 2.608.596.061 6.5mm 90mm 2.608.596.076 7.0mm 90mm 2.608.596.055 8.0mm 80mm 2.608.596.057 10.0mm 80mm 2.608.596.058 12.0mm 90mm 2.608.596.065 14.0mm 200mm HEX-9 Multi-Construction Drill Bits – For Impact Drivers 2.607.002.773 3.0mm 45mm 2.607.002.774 4.0mm 45mm 2.607.002.775 5.0mm 50mm 2.607.002.776 5.5mm 60mm 2.607.002.777 6.0mm 60mm 2.607.002.778 7.0mm 60mm 2.607.002.779 8.0mm 60mm 2.607.002.780 10.0mm 90mm

1800 999 024 | atom.com.au | getit@atom.com.au

• Use CYL-9 bits for drills and hammer drills • Use HEX-9 bits for impact drivers

Overall Length

Part Number

75mm 85mm 85mm 150mm 150mm 150mm 120mm 120mm 150mm 250mm

79011416 79011417 79011418 79011426 79011427 36003464 79011421 79011423 79011424 79011430

90mm 90mm 100mm 100mm 100mm 100mm 100mm 150mm

36003466 36003467 246471 36003468 246472 246474 246475 36003465

273


Wood Drills – Auger & Spade Bit Sets

5

Wood Drills – Auger Bits

DO You know the drill?

• Suitable for all soft and hard woods

Product Code

Size

Part Number

Auger Bits – Spur Pattern – 235mm Length 2.608.597.622 6mm 36003450 2.608.597.623 8mm 79011454 2.608.597.624 10mm 79011455 2.608.597.625 11mm 79011456 2.608.597.626 12mm 79011457 2.608.597.627 13mm 79011458 2.608.597.628 14mm 36003445 2.608.597.629 15mm 79011460 2.608.597.630 16mm 79011461 Auger Bits – Spur Pattern – 450mm Length 2.608.597.640 8mm 79011471 2.608.597.641 10mm 79011472 2.608.597.642 12mm 79011473 2.608.597.643 14mm 79011474 2.608.597.644 16mm 79011475

Product Code

Size

Part Number

2.608.597.631 2.608.597.632 2.608.597.633 2.608.597.634 2.608.597.635 2.608.597.636 2.608.597.637 2.608.597.638 –

18mm 20mm 22mm 24mm 25mm 26mm 28mm 30mm –

79011462 79011463 79011464 36003446 79011466 36003447 36003448 36003449 –

2.608.597.645 2.608.597.646 2.608.597.647 2.608.597.648 2.608.585.730

18mm 20mm 22mm 24mm 25mm

79011476 79011477 79011478 79011479 36003333

D

id you know that ancient drilling techniques consisted of using a long copper tube attached to a wooden dowel. They would then use a bow with the string wrapped around the dowel to cut through stone.

Sandstone Capstone

Wood Drills & Drill Sets – Spade Bits • Suitable for soft and hard wood, light building materials and plasterboard • Self cut bits feature a self feeding threaded tip for fast drilling

Thick Bow Rope

Wooden Dowel

Rigid Bow

Copper Coring Tube Spade Bits – Clean Cut – Short Product Code

Size

Part Number

Product Code

2.608.587.496 6 x 155mm 36003487 2.608.587.506 2.608.587.497 8 x 155mm 36003488 2.608.587.507 2.608.587.498 10 x 155mm 36003471 2.608.587.508 2.608.587.499 12 x 155mm 36003472 2.608.587.509 2.608.587.500 13 x 155mm 36003473 2.608.587.511 2.608.587.501 14 x 155mm 36003474 2.608.587.512 2.608.587.502 16 x 160mm 36003475 2.608.587.513 2.608.587.504 18 x 160mm 36003476 2.608.587.514 2.608.587.505 19 x 160mm 36003477 2.608.587.516 Spade Bits – Self Cut – Short 2.608.588.609 6 x 152mm 36003494 2.608.588.619 2.608.588.610 8 x 152mm 36003495 2.608.588.620 2.608.588.611 10 x 152mm 36003335 2.608.588.621 2.608.588.612 12 x 152mm 79011398 2.608.588.623 2.608.588.614 14 x 152mm 36003490 2.608.588.624 2.608.588.615 16 x 152mm 79011401 2.608.588.625 2.608.588.616 18 x 152mm 79011402 2.608.588.626 2.608.588.618 20 x 152mm 36003491 2.608.588.627 Spade Bits – Self Cut – Long 2.608.588.636 22 x 400mm 79011386 2.608.588.637 6 Piece Spade Bit Set 2.608.587.518 Clean Cut – Includes: 13, 16, 19, 20, 22 & 25mm 2.608.588.448 Self Cut – Includes: 13, 16, 19, 20, 22 & 25mm

274

Size

Part Number

20 x 160mm 22 x 160mm 24 x 160mm 25 x 160mm 28 x 165mm 30 x 165mm 32 x 165mm 35 x 165mm 38 x 165mm

36003478 36003479 36003480 36003481 36003482 36003483 36003484 36003485 36003486

22 x 152mm 24 x 152mm 25 x 152mm 28 x 152mm 30 x 152mm 32 x 152mm 35 x 152mm 38 x 152mm

79011405 36003492 79011407 79011409 79011410 36003493 79011412 79011413

25 x 400mm

36003489

ATOM sells spade bit extensions. Find all accessories starting from page 334

36003619 32010003

The little things, but not every thing. No matter what your thing, get it @ ATOM


Step Drills, Counterbore Drills, Countersink Drills & Sets Step Drills – Bright

Countersink Drills – Crosshole

• • • • • •

• High speed steel (HSS)

Ideal for sheet metal without pre-drilling Suitable for aluminium, plastic and fibreglass During drilling, the next step deburrs the previously drilled hole Spiral flute for reduced vibration and greater control through steps Three-flat shank suits 3-jaw chuck High speed steel (HSS)

Bright

Product Code

Steps Sizes

Shank

Part Number

107SD0412 107SD0420 107SD0430 107SD0636 107SD0003

9 4, 5, 6, 7, 8, 9, 10, 11, 12mm 9 4, 6, 8, 10, 12, 14, 16, 18, 20mm 14 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30mm 11 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36mm 3 Piece Set – SD0412, SD0420 & SD0636, ABS Case

6mm 8mm 10mm 12mm

60017117 60017118 60017119 60017120 192357

Shank Dia.

Product Code

Part Number

Product Code

Part Number

3 – 6mm 4 – 10mm 5 – 13mm 8 – 20mm 14 – 28mm 13 – 37mm 5 Piece Set ABS Case 6 – 28mm

1

⁄4” 1 ⁄4” 1 ⁄4” 1 ⁄2” 1 ⁄2” 1 ⁄2”

C1010901 C1010902 C1010903 C1010904 C1010905 C1010906

93078000 5503025 5503026 5503027 5503028 60012788

C1020901 C1020902 C1020903 C1020904 C1020905 C1020906

93078001 93078002 93078003 93078004 93078005 3008020

⁄4” – 1⁄2”

C101SC1

93010000

C102SC1T

93010003

Step Drills – TiN Coated

Countersink Drills – Single Flute

• • • • •

• High speed steel (HSS)

Ideal for sheet metal without pre-drilling Suitable for use in sheet metal, aluminium, plastic and fibreglass 1 ⁄4” hex shank suits impact drivers and quick change adaptors High speed steel (HSS) TiN coating for up to 6 times longer tool life

TiNite

Effective Dia. Range

1

Bright

TiNite

Product Code

Steps Sizes

Part Number

Effective Dia. Range

Shank Dia.

Product Code

Part Number

Product Code

Part Number

149040120 149040250 149010032 149010064

8 11 12 10

79010792 79010793 79010790 79010791

1 – 10mm 2 – 14mm 2 – 20mm 3 – 28mm

1

⁄4” 1 ⁄4” 1 ⁄2” 1 ⁄2”

C1030901 C1030902 C1030903 C1030904

93078006 93078007 93078008 93078009

C1040901 C1040902 C1040903 C1040904

93078010 93078011 93070523 93078012

4, 5, 6, 7, 8, 10, 11, 12mm 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25mm 5 ⁄32”, 3⁄16”, 7⁄32”, 1⁄4”, 9⁄32”, 5⁄16”, 11⁄32”, 3⁄8”, 13⁄32”, 7⁄16”, 15⁄32”, 1⁄2” 5 ⁄32”, 1⁄4”, 5⁄16”, 3⁄8”, 1⁄2”, 9⁄16”, 21⁄32”, 3⁄4”, 7⁄8”, 1”

Step Drill Set – 3 Piece, Bright

Countersink Drills – Three Flute

D1071

• High speed steel (HSS)

• M2 high speed steel (HSS) • For drilling holes in thin material Includes: • 4 – 12 x 1mm • 6 – 20 x 2mm • 6 – 30 x 2mm

Bright

60014662

TiNite

Effective Dia. Range

Shank Dia.

Product Code

Part Number

Product Code

Part Number

4 – 10mm 4 – 14mm 5 – 20mm 6 – 28mm 6 – 37mm 4 Piece Set, ABS Case 4 – 28mm

1

⁄4” 1 ⁄4” 1 ⁄2” 1 ⁄2” 1 ⁄2”

C1050901 C1050902 C1050903 C1050904 C1050905

93078013 88858948 88858949 93070177 88858950

C1060901 C1060902 C1060903 C1060904 C1060905

93070003 93078015 93070004 93070525 93070005

⁄4” – 1⁄2”

C105STF1

93078014

C106STF1T

93078016

1

Counterbore Drill Set – 6 Piece, Bright

Countersink Drill Set – 6 Piece, Three Flute

M3381

D1061

• M35 high speed steel (HSS) • Plain shank drills Includes: • 6 x counterbores – M3, M4, M5, M6, M8 & M10

• M2 high speed steel (HSS) • 3 flute type • Angle 45° Includes: • 6 x countersinks – Ø1.5 – Ø6.3mm Ø6.3 – Ø8.3mm Ø8.3 – Ø10.4mm Ø10.4 – Ø12.4mm Ø12.4 – Ø16.5mm Ø16.5 – Ø20.5mm

60014653

5

60014655

1800 999 024 | atom.com.au | getit@atom.com.au

275


Centre, Spot Weld, Slot & End Mill & Panel & Rivet Drills

5

Centre Drills – Bright

Panel & Rivet Drills

• For drilling of centre holes in the end of shafts and for drilling lathe centres • M2 high speed steel (HSS) • Centre drills also available in bell and A type on request

• High speed steel (HSS) to suit blind rivets • Shortie and TuPoint have 135° point angle, thin web and are especially designed for drilling thin materials, with maximum thickness 1⁄4” and 3⁄16” respectively • Stub drills are conventional 118º point angle • TuPoint HSS cobalt are designed to drill very tough materials such as stainless steel • Shortie and Tupoint drills also available TiNite coated

High Speed Steel Size

Product Code

#1 #2 #3 #4 #5 #6 #7

D1360001 D1360002 D1360003 D1360004 D1360005 D1360006 D1360007

TiNite Part Number 2848023 2848024 2848025 2848026 2848027 2848028 2848029

Product Code

Part Number

D1370001 D1370002 D1370003 D1370004 D1370005 – –

92878000 92878001 92870000 92870001 88860059 – –

Shortie Single Ended

TuPoint Double Ended

Centre Drill Set – 5 Piece, Bright

Product Code

D508

Size 1 ⁄8” #30 #20 #11 Size 1 ⁄8” #30 #20 #11 Size 1 ⁄8” #30 #20 #11

• Industrial quality • For drilling of centre holes in the end of shafts and for drilling lathe centres • M2 high speed steel (HSS) Includes: • 5 x centre drills – 1, 2, 3, 4, 5

60014656

Slot & End Mill Sets – 10 Piece, Bright

Suits Rivet Size 3mm 1 ⁄8” 4mm, 5⁄32” 3 ⁄16” Suits Rivet Size 3mm 1 ⁄8” 4mm, 5⁄32” 3 ⁄16” Suits Rivet Size 3mm 1 ⁄8” 4mm, 5⁄32” 3 ⁄16”

Part Number

Shortie Single Ended (10 Per Pack) D1210318 92800008 D1210326 92800009 D1210409 92800010 D1210485 92800011 Stub (10 Per Pack) D1230318 92800002 D1230326 92800005 D1230409 92800006 D1230485 92800007 Shortie (2 Per Pack) D1310318 92908001 D1310326 92908002 D1310409 92908003 D1310485 92908004

Part Number

TuPoint Double Ended (10 Per Pack) D1220318 2839021 D1220326 2839022 D1220409 2839023 D1220485 2839024 TuPoint Cobalt (10 Per Pack) D1300318 2839025 D1300326 2839026 D1300409 2839027 D1300485 2839028 TuPoint (2 Per Pack) D1330318 92908005 D1330326 92908006 D1330409 92908007 D1330485 92908008

DO You know the drill?

• Available in metric and imperial • M2 high speed steel (HSS) • Plain shank Includes: • 5 x slot drills • 5 x end mills

60014660 Product Code

Set

Range

Part Number

M3301 M3321

10 Piece Set – Metric 10 Piece Set – Imperial

6, 10, 12, 16, 20mm 1 ⁄4”, 3⁄8”, 1⁄2”, 5⁄8”, 3⁄4”

60014660 60014661

Spot Weld Drills • Designed for vehicle body repairs • Spur point • 5% cobalt and solid carbide drills

D

id you know that dental drills used to cut into human teeth rotate at up to 250,000RPM. That’s over 4,000 spins every second! They also shoot out water when they spin to cool the tooth, otherwise the friction alone would heat it up so much that it could damage the nerves!

36002662

276

Product Code

Product Code

Description

Diameter

Length

Part Number

D2050060 D2040080 D2050080 D2030080 D2060080

HSS 5% Colbalt HSS 5% Colbalt HSS 5% Colbalt HSS 5% Colbalt Solid Carbide

6mm 8mm 8mm 8mm 8mm

45mm 38mm 45mm 79mm 45mm

36002659 36002660 36002661 36002662 36002663

The little things, but not every thing. No matter what your thing, get it @ ATOM


Broach Cutters BROACH CUTTERS – 30 & 55MM CUT DEPTH

Broach Cutters – 50mm Cut Depth • • • • • • •

• 30 & 55mm depth of cut • High quality high speed steel (HSS) with cutting profile designed for higher feed rates • Three times more efficient than traditional drill bits • Suitable for high precision drilling in sheet metal • Interchangeable with most magnetic based drills • Quick change chuck • High quality cut finish • Suitable for use in metal sheets, construction steel, I-beam steel, steel pipes and cast iron

30mm Depth Of Cut

50mm depth of cut One-touch cutter – simply push in Provides self-centering effect to extend cutter life Cuts holes three times faster than conventional twist drills No pilot hole required Last digit of product code signifies pilot pin diameter Selected imperial size cutters available

55mm Depth Of Cut

Diameter

Part Number

Diameter

Part Number

12mm 13mm 14mm 16mm 17mm 18mm 19mm 20mm 22mm

49480120 49480130 49480140 49480160 49480170 49480180 49480190 49480200 49480220

12mm 14mm 16mm 18mm 20mm 22mm 24mm 26mm 32mm

49480620 49480640 49480660 49480680 49480700 49480720 49480740 49480760 49480820

Broach Cutters – 25mm Cut Depth • • • • • • •

5

TM

TM

25mm depth of cut One-touch cutter – simply push in Provides self-centering effect to extend cutter life Cuts holes three times faster than conventional twist drills No pilot hole required Last digit of product code signifies pilot pin diameter Selected imperial size cutters also available

Product Code

Diameter

Part Number

Product Code Diameter

Part Number

OT12506 OT13506 OT14506 OT15506 OT16508 OT17508 OT18508 OT19508 OT20508 OT21508 OT22508 OT23508 OT24508 OT25508 OT26508 OT27508 OT28508 OT29508 OT30508 OT31508

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm 31mm

88895576 88891960 88893137 93050002 88891202 88891550 5504013 88889157 5504014 88893243 5504015 88889790 5504016 5504017 5504018 88893796 88892157 93050028 88889130 93058009

OT32508 OT33508 OT34508 OT35508 OT36508 OT37508 OT38508 OT39508 OT40508 OT41508 OT42508 OT43508 OT44508 OT45508 OT46508 OT47508 0T48508 OT49508 OT50508 –

5504019 88894285 88838919 88900039 93050007 93058010 88891496 93058011 93050000 93050021 88842644 93058012 88842482 88889620 93050008 93058013 93058208 60020075 88838680 –

32mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm 40mm 41mm 42mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm –

Broach Cutters – 75mm Cut Depth Product Code

Diameter

Part Number

Product Code Diameter

Part Number

OT12256 OT13256 OT14256 OT15256 OT16258 OT17258 OT18258 OT19258 OT20258 OT21258 OT22258 OT23258 OT24258 OT25258 OT26258 OT27258 OT28258 OT29258 OT30258 OT31258

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 28mm 29mm 30mm 31mm

88891311 5504000 5504001 5504002 5504003 93058000 5504004 93050017 5504005 93050004 5504006 88892955 5504007 5504008 5504009 93050016 5504010 93058001 5504011 93050001

OT32258 OT33258 OT34258 OT35258 OT36258 OT37258 OT38258 OT39258 OT40258 OT41258 OT42258 OT43258 OT44258 0T45258 OT46258 OT47258 OT48258 OT49258 OT50258 –

5504012 93058002 88844073 88891087 93050006 93058003 88809940 93058004 88809952 93058005 88837036 88842276 88894153 88809951 93050009 93058006 93050256 93058007 88840022 –

32mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm 40mm 41mm 42mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm –

• • • •

TM

75mm depth of cut High quality high speed steel (HSS) Thin wall for fast, precision holes Superior heat treatment

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

OT18758 OT19758 OT20758 OT21758 OT22758 OT23758 OT24758 OT25758

18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm

193037 30000908 30000909 30000910 30000911 30000912 30000913 30000914

OT26758 OT27758 OT28758 OT29758 OT30758 OT31758 OT32758 –

26mm 27mm 28mm 29mm 30mm 31mm 32mm –

30000915 30000916 30000917 30000918 30000919 30000920 30000921 –

1800 999 024 | atom.com.au | getit@atom.com.au

277


Broach Cutters

5

Broach Cutters – Tungsten Carbide Tipped, 25-75mm Cut Depth • • • •

25 – 75mm depth of cut For use on Atra Ace Machines, broach holders and most other Atra and side-lock type machines Can be run at higher feeds and speeds to produce excellent quality and accuracy of holes for simplicity ‘One‑Touch’ cutters that require no tools for cutter replacement

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

60020076 60020077

NJTK01150 NJTK01151

14mm 15mm

60020078 60020079

NJTK01152 NJTK01153

16mm 17mm

60020080 60020081

– –

– –

60020082 60020083 60020084 60020085 60020086

NJTK00312 NJTK00314 NJTK00316 NJTK00317 NJTK00319

23mm 24mm 25mm 26mm 27mm

60020087 60020088 60020089 60020090 60020091

NJTK00320 NJTK00321 NJTK00322 NJTK00323 NJTK00324

28mm 29mm 30mm 31mm 32mm

60020092 60020093 60020094 60020095 60020096

NJTK00325 NJTK00326 NJTK00328 – –

33mm 34mm 35mm – –

60020097 60020098 60020099 – –

60020100 60020101 60020102 60020103 60020104 60020105 93058220 60020106 60020107 60020108 60020109 60020110 60020111 60020112

NJTK00395 NJTK00397 NJTK00398 NJTK00399 NJTK00400 NJTK00401 NJTK00402 NJTK00403 NJTK00404 NJTK00405 NJTK00406 NJTK00407 NJTK00408 NJTK00409

26mm 27mm 28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 37mm 38mm 39mm

60020113 93078129 60020114 60020115 60020116 60020117 60020118 60020119 60020120 93058235 60020121 60020122 60020123 60020124

NJTK00410 NJTK00411 NJTK00412 NJTK00413 NJTK00414 NJTK00415 NJTK00416 NJTK00417 NJTK00418 NJTK00419 NJTK00420 NJTK00442 NJTK00443 NJTK00444

40mm 41mm 42mm 43mm 44mm 45mm 46mm 47mm 48mm 49mm 50mm 51mm 52mm 53mm

60020125 60020126 60020127 60020128 60020129 60020130 60020131 60020132 60020133 60020134 60020135 60020136 60020137 60020138

NJTK00445 NJTK00446 NJTK00447 NJTK00448 NJTK00449 NJTK00450 NJTK00451 NJTK00607 NJTK00608 NJTK00609 NJTK00610 NJTK00611 – –

54mm 55mm 56mm 57mm 58mm 59mm 60mm 61mm 62mm 63mm 64mm 65mm – –

60020139 93050018 93050029 60020140 60020141 60020142 60020143 60020144 60020145 60020146 60020147 60020148 – –

93058214 188122 188123 36000450 93050031 93058239 60017565 36000451 93058242 36000452

NJTK01013 NJTK01014 NJTK01015 NJTK01016 NJTK01017 NJTK01018 NJTK01019 NJTK01020 NJTK01021 NJTK01022

28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 37mm

93058207 36000453 60017566 36000454 234302 93050035 93058233 93058234 234303 36000455

NJTK01023 NJTK01024 NJTK01025 NJTK01026 NJTK01027 NJTK01028 NJTK01029 NJTK01030 NJTK01031 NJTK01032

38mm 39mm 40mm 41mm 42mm 43mm 44mm 45mm 46mm 47mm

93058241 171951 93058203 246338 180216 36000456 181514 93058204 93058232 36000457

NJTK01033 NJTK01034 NJTK01035 NJTK01112 NJTK01113 NJTK01114 NJTK01115 NJTK01116 – –

48mm 49mm 50mm 51mm 52mm 53mm 54mm 55mm – –

219716 36000458 93058223 177022 36000459 36000460 36000461 177914 – –

50mm Depth of Cut Part Number

Diameter

25mm Depth of Cut Part Number

50mm Depth of Cut Part Number

93070066 93070067 93070068 93070069 93070070 93070071 93070072

33mm 34mm 35mm 36mm 37mm – –

93070032 93070033 93070034 93070035 93070036 – –

93070073 93070074 93070075 93070076 93070077 – –

25mm Depth Of Cut – ¾” Shank NJTK01148 NJTK01149

12mm 13mm

– –

35mm Depth Of Cut – ¾” Shank NJTK00302 NJTK00304 NJTK00306 NJTK00308 NJTK00310

18mm 19mm 20mm 21mm 22mm

50mm Depth Of Cut – ¾” Shank NJTK01154 NJTK01155 NJTK01156 NJTK01157 NJTK01158 NJTK01159 NJTK00381 NJTK00382 NJTK00384 NJTK00386 NJTK00388 NJTK00390 NJTK00392 NJTK00394

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm

75mm Depth Of Cut – ¾” Shank NJTK01003 NJTK01004 NJTK01005 NJTK01006 NJTK01007 NJTK01008 NJTK01009 NJTK01010 NJTK01011 NJTK01012

18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm

Broach Cutters – Magnetic Drill, 25-50mm Cut Depth • The Fusion2™ multi-fit shank suits all magnetic drills with the 2 flat 3⁄4” weldon arbor and other brand drills using the One-Touch arbor system • Cutters are available with diameters from 12 – 60mm • Cutters are available with a 25mm, 50mm or 76mm depth of cut • Also available in TCT (tungsten carbide) and HSS M42 for cutting hardened steels

278

Diameter

25mm Depth of Cut Part Number

50mm Depth of Cut Part Number

12mm 13mm 14mm 15mm 16mm 17mm 18mm

93070011 93070012 93070013 93070014 93070015 93070016 93070017

93070052 93070053 93070054 93070055 93070056 93070057 93070058

Diameter

25mm Depth of Cut Part Number

50mm Depth of Cut Part Number

Diameter

25mm Depth of Cut Part Number

19mm 20mm 21mm 22mm 23mm 24mm 25mm

93070018 93070019 93070020 93070021 93070022 93070023 93070024

93070059 93070060 93070061 93070062 93070063 93070064 93070065

26mm 27mm 28mm 29mm 30mm 31mm 32mm

93070025 93070026 93070027 93070028 93070029 93070030 93070031

The little things, but not every thing. No matter what your thing, get it @ ATOM


Broach Cutters Broach Cutters – Magnetic Drill, 25-50mm Cut Depth

Broach Cutter – Countersink

• The Fusion2™ multi-fit shank suits all magnetic drills with the 2 flat 3⁄4” weldon arbor and other brand drills using the One-Touch arbor system • Cutters are available with diameters from 12 – 60mm • Cutters are available with a 25mm, 50mm or 76mm depth of cut • Also available in TCT (tungsten carbide) and HSS M42 for cutting hardened steels

• • • •

5

TM

OT10-30CS 8% cobalt for superior durability Ideal for use in Atra Ace machines Suitable for all metals, including hard metals Capacity: 10 – 30mm (45°)

30000922

Diameter

25mm Depth of Cut Part Number

50mm Depth of Cut Part Number

12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm

93070011 93070012 93070013 93070014 93070015 93070016 93070017 93070018 93070019 93070020 93070021 93070022 93070023

93070052 93070053 93070054 93070055 93070056 93070057 93070058 93070059 93070060 93070061 93070062 93070063 93070064

Diameter

25mm Depth of Cut Part Number

50mm Depth of Cut Part Number

25mm 26mm 27mm 28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm 36mm 37mm

93070024 93070025 93070026 93070027 93070028 93070029 93070030 93070031 93070032 93070033 93070034 93070035 93070036

93070065 93070066 93070067 93070068 93070069 93070070 93070071 93070072 93070073 93070074 93070075 93070076 93070077

Do You know the drill?

D

id you know that the worlds largest drill bit sits on the front of “Bertha,” a 7,000 tonne tunnel drilling machine.

The drill bit is an impressive 17.5m (57.5ft) wide!

Broach Cutter Pilot Pins • Material: SUJ2 • Hardness: HRC58+2

17.5m

Product Code

For Size

Size

Part Number

SHC30475P SHC30675P SHC554100P SHC556100P

12 – 13mm x 30mm 12 – 13mm x 55mm 14 – 70mm x 30mm 14 – 70mm x 55mm

4.75 x 3.6 x 75mm 4.75 x 3.6 x 100mm 6.30 x 4.8 x 75mm 6.35 x 4.8 x 100mm

49485310 49485311 49485312 49458313

Broach Cutter Pilot Pins

TM

• For centering cutters • Opens fluid valve and ejects slug from cutter

That’s about 3x taller than an average adult giraffe! Product Code

Size

NAP0625 NAP0650 NAP0825 NAP0835

6 x 25mm 6 x 50mm 8 x 25mm 8 x 35mm

Part Number 5504020 5504021 5504022 5504023

Product Code

Size

Part Number

NAP0850 NAP0875 NAP1275 –

8 x 50mm 8 x 75mm 12 x 75mm –

5504024 93050032 93058236 –

1800 999 024 | atom.com.au | getit@atom.com.au

279


Holesaws & Holesaw Sets

5

Holesaws – 34mm Cut Depth

Holesaws – Tungsten Carbide Tooth, 50mm Cut Depth

• 34mm cut depth • Provide fast, accurate hole cutting with tough fracture resistant HSS bi-metal • The alternating tooth pitch prevents any chattering during sawing • Recommended for alloy and non‑alloy steels, stainless steel (INOX), cast iron, aluminium, copper, bronze, brass, wood and plastics • Drives: drill presses, lathes, portable electric drills with corresponding speeds and power output

Product Code Model

Size

25100116 25100117 25100119 25100220 25100322 25100425 25100527 25100629 25100730 25100832 25101035 25101138 25101240 25101241 25101344 25101448 25101551 25101552 25101654 25101757 25101860

16mm 17mm 19mm 20mm 22mm 25mm 27mm 29mm 30mm 32mm 35mm 38mm 40mm 41mm 44mm 48mm 51mm 52mm 54mm 57mm 60mm

LS16 LS17 LS19 LS20 LS22 LS25 LS27 LS29 LS30 LS32 LS35 LS38 LS40 LS41 LS44 LS48 LS51 LS52 LS54 LS57 LS60

Part Number 3024002 3024003 3024004 3024005 3024007 3024009 3024010 3024011 3024012 3024013 3024015 3024017 3024018 3016001 3016003 3016005 3016006 3016007 3016008 3016009 3016011

• • • •

50mm cut depth Single tungsten carbide tooth 8% cobalt alloy for long lifetime 5 times faster in wood than standard bi-metal holesaws • Suitable for wood, laminate, plastics and plywood

Product Code Model

Size

25101963 25101965 25102067 25102170 25102273 25102376 25102479 25102583 25102586 25102689 25102792 25102895 25102912 25103015 25103111 25103114 25103221 25103227 25103440 25103552 –

64mm 65mm 67mm 70mm 73mm 76mm 79mm 83mm 86mm 89mm 92mm 95mm 102mm 105mm 111mm 114mm 121mm 127mm 140mm 152mm –

LS64 LS65 LS67 LS70 LS73 LS76 LS79 LS83 LS86 LS89 LS92 LS95 LS102 LS105 LS111 LS114 LS121 LS127 LS140 LS152 –

Part Number 3016012 3016013 3016014 3016015 3016016 3016017 3016018 3008001 3008002 3008003 3008004 3008005 3008007 3008008 3008010 3008011 3008012 3008013 3008015 3008017 –

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

2.608.678.243 2.608.678.244 2.608.678.245 2.608.678.246 2.608.678.247 2.608.678.248 2.608.678.249 2.608.678.250

25mm 32mm 38mm 42mm 44mm 51mm 54mm 57mm

36003594 36003595 36003596 36003597 36003598 36003599 36003600 36003601

2.608.678.251 2.608.678.252 2.608.678.253 2.608.678.254 2.608.678.255 2.608.678.256 2.608.678.257 –

59mm 63mm 65mm 72mm 79mm 90mm 92mm –

36003602 36003603 36003604 36003605 36003606 36003607 36003608 –

Holesaw Sets – General Purpose • • • •

Sets include power-change adaptor Transparent lid Rubber covered outer for durability Storage for arbors and pilot bits

36003611

Holesaws – 60mm Cut Depth • • • • •

60mm cut depth Power-change system for speed 8% cobalt for long lifetime Variable tooth pitch for fast work Improved slot design

Product Code

Description

Part Number

2.608.580.875 2.608.580.872 2.608.580.878 2.608.584.682

6 Piece Set – 20, 25, 32, 38, 51 & 64mm 7 Piece Set – 16, 20, 25, 32, 40, 51 & 64mm 11 Piece Set – 19, 22, 25, 32, 35, 38, 44, 51, 57, 64 & 76mm Converter Set for Holesaws

36003610 36003611 36003609 36003540

Holesaw Sets – By Trade

Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

2.608.580.969 2.608.580.970 2.608.580.971 2.608.580.972 2.608.580.973 2.608.580.974 2.608.580.975 2.608.580.976 2.608.580.977 2.608.580.978

20mm 22mm 25mm 32mm 35mm 38mm 40mm 44mm 51mm 54mm

36003576 36003577 36003578 36003579 36003580 36003581 36003582 36003583 36003584 36003585

2.608.580.979 2.608.580.980 2.608.580.981 2.608.580.982 2.608.580.983 2.608.580.984 2.608.580.985 2.608.580.986 2.608.580.987 2.608.580.988

60mm 64mm 67mm 68mm 70mm 73mm 76mm 83mm 102mm 127mm

36003586 36003587 36003588 36003589 36003590 36003591 36003592 36003593 36003574 36003575

• Provides fast, accurate hole cutting with tough fracture resistant HSS Bi-Metal • The alternating tooth pitch prevents any chattering during sawing • Recommended for alloy and non‑alloy steels, stainless steel (INOX), cast iron, aluminium, copper, bronze, brass, wood and plastics • Drives: drill presses, lathes, portable electric drills with corresponding speeds and power output

30004907 Product Code

Keep your hands safe with gloves starting on page 4 ATOMise Taking Safety Seriously

280

Model

25999902

LS-SO 10

25900910

LS-SO 9E-1

25900020

LS-SO 13

Description Plumber’s & Pipe Fitter’s Kit – 9 Piece: Holesaw Sizes: 41, 51, 57, 73, 86 & 111mm Hex Shank Arbor: 3⁄8” Pilot Drill: 6⁄60” (short), Adaptor Electrician’s Kit – 13 Piece: Holesaw Sizes: 16, 20, 25, 32, 40, 51, 70 & 92mm Hex Shank Arbors: 1⁄4” & 3⁄8”, Pilot Drills: 6⁄60” (short) & 6⁄90” (long), Adaptor Engineer’s Kit – 13 Piece: Holesaw Sizes: 20, 22, 25, 32, 40, 44, 51, 57 & 64mm Hex Shank Arbors: 1⁄4” & 3⁄8” Pilot Drill: 6⁄90” (long), Adaptor

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number 92918145

30004907

92910055


Holesaw Arbors, Pilot Drills & Accessories Holesaw Arbors – Hex Shank

Holesaw Pilot Drills – Hex Shank

• Power-change arbor – for quick and safe change of holesaws and pilot bits with one click • Adaptors are available for standard arbor holesaws • 11mm hex shank

H107BD24

5

• Suits arbors BA1, BA2, BA3, TA3, BA4, BA8, AS1, QF1, QF3, QF10, VA1, VA2 & VA3

36003441

Product Code

Description

Suits Holesaw Dia.

Part Number

2.608.678.258 2.608.678.259 2.608.584.844

Standard Arbor – Suits Single Tooth Holesaws Standard Arbor – Suits Single Tooth Holesaws Power-Change – Suits Deep Bi-Metal Holesaws

14 – 30mm 32 – 152mm 14 – 210mm

36003442 36003443 36003441

92918112

Holesaw Pilot Drills – Round Shank

Holesaw Arbors – Hex & Round Shank

• To suit LS14 – 152 holesaws • Shank diameter: 6.35mm 159701

230804

36001067

36001053

173525

Product Code

Model

To Suit Holesaws

Shank Dia. Shank

Thread

Part Number

25200111 25200211 25200407

LSS-1 LSS-2 LSS-4

LS14 – 30 LS32 – 152 LS14 – 30

9.53mm 9.53mm 6.35mm

1

⁄2” – 20” UNF 5 ⁄8” – 18” UNF 1 ⁄2” – 20” UNF

159701 230804 36001053

Hexagonal Hexagonal Round

Product Code

Description

Part Number

25202005 25202007

LSB 6/60 LSB 6/90

36001067 173525

Holesaw Arbor & Pilot Drill – Hex Shank

Holesaw Accessories – Arbor Adaptor

2.608.584.674

25203001

• • • •

• Suitable for holesaws LS32 – 38 • Not recommend for holesaws with a diameter of more than 38mm

Power-change adapter Includes HSS-G pilot drill bit Suits holesaw diameters 14 – 152mm 8mm hex shank

79011321

36001051

Holesaw Pilot Drills – Hex Shank

Holesaw Accessories – Grub Screw

• Hex shank • HSS-Co or HSS-G available • 135° point angle split point

28901014 • M8 x 8 socket screw

Product Code

Description

Length

Part Number

2.608.584.677 2.608.584.676 2.609.390.592 2.608.678.260

HSS-Co – Suits Deep Bi-Metal Holesaws HSS-G – Suits Deep Bi-Metal Holesaws HSS-G – Suits Deep Bi-Metal Holesaws HSS-G – Suits Single Tooth Wood Holesaws

80mm 80mm 100mm 148mm

79011323 79011322 36003469 36003470

36001069

1800 999 024 | atom.com.au | getit@atom.com.au

281


Drilling Accessories & Extractors

5

Drilling Accessories – Portable Drill Press

Screw Extractors

DM100 • Gives you the power to work ergonomically, safely and productively • Lightweight – weighs just 1.6kg • Drill not included

92900020

Drilling Accessories – Drill Bit Sharpeners • Sharpen carbide, cobalt, HSS, black oxide, TiN-coated, twist and masonry bits • Able to create and sharpen split point bits 92230422: • Ideal for the serious DIY’er or hobbyist who needs to re-sharpen often 92230441: • Ideal for professional use • Variable sharpening angle • Adjustable material take-off

Product Code

Model

35535 35540 35545 35550 35555 35560 35565 35570 35580

1 6mm 3mm 3.5mm 2 8mm 5mm 5.2mm 3 10mm 6mm 6.9mm 4 11mm 8mm 8.6mm 5 13 – 14mm 9mm 9.5mm 6 16mm 11mm 12.0mm 7 19mm 13mm 13.7mm 8 22 – 25mm 16mm 16.9mm 5 Piece Set – Includes Models 1, 2, 3, 4 & 5

Screw Dia.

Suits Drill

Flute Dia.

Length

Part Number

59mm 70mm 78mm 84mm 95mm 105mm 114mm 121mm

1532003 1532004 1532005 1532006 1532007 1532008 1532009 1532010 1532002

Stud Extractor & Setter 012000 • Compact yet powerful • Used to remove rusted, threaded or seized studs and set new ones • High strength, eccentric knurled wheel design provides increasing grip and force to affected stud ensuring superior grip with minimal effort • 1 ⁄2” square drive • Stud capacity: 6 – 19mm

Model

Chuck Size

Drill Bit Capacity

Variable Sharpening Angle

Part Number

500X 750X

1

⁄2” 3 ⁄4”

2.5 – 13.0mm 2.5 – 19.0mm

118°, 135° 115° – 140°

92230422 92230441

Drilling Accessories – Drill Bit Gauge • Excellent for sizing bolts, screws, twist drills and nuts (USS, SAE and metric) • Measure bolt diameter by pushing bolt through sizing holes • Gauges hex nuts and washers (USS, SAE and metric) by holding under metric holes • Special notch gauges flat headed metal and wood screws • Metric and imperial ruled edge • Sturdy and lightweight plastic • Dimensions: 217(l) x 82(w)mm

91610044

Extractors & Extractor Sets • Chrome steel • Designed to remove broken studs, bolts, socket screws and fittings • Available individually or in sets 30004399: • Includes left hand cobalt drills

2846005

30004399

60021420

Drilling Accessories – Engineer’s Black Book L100V2EN • A compendium of useful information at your finger tips • Ideal for apprentices, trades people, tool rooms, metal working industries and machine shops • Over 160 matte laminated greaseproof pages to ensure glare-free reading and long life • Includes a bonus drill point sharpening gauge

92188011

282

Product Code

Size

Drill Size

Range

M6010001 M6010002 M6010003 M6010004 M6010005 M6010006 M6010007 M6010008 M6010009 Extractor Sets M603S15 M603S15A M603S20L

#1 #2 #3 #4 #5 #6 #7 #8 #9

2.0mm 3.0mm 4.0mm 5.5mm 7.5mm 10.5mm 13.5mm 20.0mm 27.0mm

M4 – M5 M6 – M8 M8 – M10 M10 – M14 M14 – M20 M20 – M27 M27 – M36 M36 – M48 M48 – M56

5 Piece Set – #1 to #5 6 Piece Set – #1 to #6 10 Piece Set – #1 to #5 & Left Hand Cobalt Drills 2, 3, 4, 5.5 & 7.5mm

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number 2846005 2846006 2846007 2846008 2846009 2846010 2846011 2846012 2846013 93008001 2846020 30004399


Extractors Sets , Deburring Tools & Accessories

5

Deburring Tools & Sets

Extractor Sets – Straight & Spiral Flute Straight Flute: • Extracts without expanding material • Ideal for pipes and fittings • Works on left-hand and right-hand threads Spiral Flute: • Spiral bites into harder materials with increasing torque • Flutes embed deeper with each turn • Designed to remove broken studs, bolts, socket screws and fittings • Aggressive left hand spiral design for extra gripping power

92188000 Description

Part Number

Tele Set – Includes NG-3 Handle, S Holder, 5 x S10 & 5 x S20 Blades Super Burr – Includes NG-3 Handle, S Holder, S20, S30 & S100 Blades Burr 5 – Includes Nogagrip Handle With S10, S20, S35, S101 & S202 Heavy Duty Swivel Blades Magic Burr 2 – Includes Nogagrip Handle With N1 & N2 Light Duty Swivel Blades Liza Burr - Includes UH1000 Handle, SN Holder, N1 & N2 Blades Edge-Off – Disposable Tool – Fixed S10 Blade With Pocket Clip Double Burr – Simultaneously Removes Burrs From Both Sides of Sheet Metal, Range 0 – 12mm Rapid Burr – Includes Aluminium Handle & Replaceable S10, S20 Blades

92188000 92180161

LB1000 EO1015 2846017

Product Code

Description

Part Number

53635 53645 53535 53545 11119

Straight Flute Extractor Set – 5 Pieces, No. 1 – 5 Straight Flute Extractor Set – 6 Pieces, No. 1 – 6 Spiral Flute Extractor Set – 5 Pieces, No. 1 – 5 Spiral Flute Extractor Set – 6 Pieces, No. 1 – 6 Spiral Flute Extractor Set With Drills – 10 Pieces, No. 1 – 5

Extractor Set – 25 Piece 35585 • Contains 20 precision tools including one of each extractor • Comes in preformed plastic box for convenient storage Includes: • Extractor models 1 to 5 with turnouts • Drill models 1 to 5 • Drill guides models 921 to 1821

1532001

2846018 2846015 2846019 2846016 2846017

3037015

NG8350 NG3003

NG2002

2846019

92188002

Product Code

NG1005

2846015

92180161

DB1000 RB1005

92188078 91968036 92180038 92188001 92188002 3037015

Deburring Tool Sets 92188010 Includes: • UNI–handle • SN and C holders • C20 countersink • T120 scraper blade • N1, N2, S10, S20, S30 & S101 swivel blades

92188009 Includes: • UNI-handle • SN holder • Keyway and double burrs • 2 edge-off and d-key • T120 scraper blade • C holder with C20 and C12 countersinks • D holder with D50 and D66 blades • L holder with L1 and L2 blades • N1, N2, S10, S101 and S20 swivel blades

Product Code

Description

Part Number

UK1000

11 Piece Deburring Unikit

92188010

NX1000

22 Piece Deburring Box Kit

92188009

Extractor Set – 63 Piece

Deburring Tool Accessories – Blades

35590

• 3.2mm shank

• Max. depth extractor range: 1” – 3” • Packed in a fitted compartment box Includes: • 8 x screw extractors – models 1 to 8 inclusive (1 to 5 with turnuts) • 6 x pipe extractors – models 80 to 85 • 9 x drills – models 1 to 8 & 36 • Complete set of drill guides & bushings

92188004

20913001

Product Code

Description

BS1010

For Aluminium & Steel

3037016

BS2010

Swivel Blade For Brass & Cast Iron

3037017

BS3010

For Tubing & Sheet Metal

3037018

BS3510

For Straight Edges

92188004

BK1010

With Fine Cutting Edge For Steel, Aluminium & Plastic

92188003

1800 999 024 | atom.com.au | getit@atom.com.au

Part Number

283


Tapping Drill Sizes

5

Tapping Drill Sizes Tap Size M1.6 M2 M2.5 M3 M3.5 M4 M4.5 M5 M6 M8 M10 M12 M14 M16

Pitch 0.35mm 0.40mm 0.45mm 0.50mm 0.60mm 0.70mm 0.75mm 0.80mm 1.00mm 1.25mm 1.50mm 1.75mm 2.00mm 2.00mm

Metric Metric Coarse (60°) Tapping Drill Tap Size 1.25mm M18 1.60mm M20 2.05mm M22 2.50mm M24 2.90mm M27 3.30mm M30 3.70mm M33 4.20mm M36 5.00mm M42 6.80mm M45 8.50mm M48 10.20mm M52 12.00mm M56 14.00mm –

Pitch 2.50mm 2.50mm 2.50mm 3.00mm 3.00mm 3.50mm 3.50mm 4.00mm 4.50mm 4.50mm 5.00mm 5.00mm 5.50mm –

Tapping Drill 15.50mm 17.50mm 19.50mm 21.00mm 24.00mm 26.50mm 29.50mm 32.00mm 37.50mm 40.50mm 43.00mm 47.00mm 50.50mm –

The tapping drill sizes indicated are recommended only and should give approximately 75% of thread depth

Tap Size M3 M4 M5 M6 M8 M10 M12 M14 M16*

Pitch 0.35mm 0.50mm 0.50mm 0.75mm 1.00mm 1.25mm 1.25mm 1.50mm 1.50mm

M10 M12

1.00mm 1.25mm

Metric Fine ISO Metric Fine (60°) Tapping Drill Tap Size 2.65mm M20* 3.50mm M22 4.50mm M24 5.20mm M25* 7.00mm M27 8.80mm M30 10.80mm M32* 12.50mm M40* 14.50mm M50* Metric Fine – Spark Plug 9.00mm M14 10.80mm M18

TPI 8 8 8 8

8UN (8tpi) Unified National Form (60°) Tapping Drill Tap Size 25.50mm 15⁄8” 28.50mm 13⁄4” 31.75mm 17⁄8” 35.00mm 2”

TPI 64 56 48 40 40 32 32 24 24 20 18 16 14

UNC Unified National Coarse (60°) Tapping Drill Tap Size 1 1.55mm ⁄2” 9 1.85mm ⁄16” 5 2.10mm ⁄8” 3 2.25mm ⁄4” 7 2.60mm ⁄8” 2.75mm 1” 3.40mm 11⁄8” 3.80mm 11⁄4” 4.50mm 13⁄8” 5.10mm 11⁄2” 6.60mm 13⁄4” 8.00mm 2” 9.40mm 21⁄4”

Tap Size #1 (0.073) #2 (0.086) #3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164) #10 (0.190) #12 (0.216) 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16”

284

Tap Size #2 (0.0860) #3 (0.099) #4 (0.112) #5 (0.125) #6 (.138) #8 (0.164) #10 (0.190) #12 (0.216) 3 ⁄16” * 1 ⁄4” 5 ⁄16” 3 ⁄8” *UNS

TPI 64 56 48 44 40 36 32 28 32 28 24 24

UNF Unified National Fine (60°) Tapping Drill Tap Size 7 1.90mm ⁄16” 1 2.15mm ⁄2” 9 2.40mm ⁄16” 5 2.70mm ⁄8” 3 2.95mm ⁄4” 7 3.50mm ⁄8” 4.10mm 1” 4.70mm 1”* 4.00mm 11⁄8” 5.50mm 11⁄4” 6.90mm 13⁄8” 8.50mm 11⁄2”

TPI 20 20 18 18 16 14 12 14 12 12 12 12

Tapping Drill 9.90mm 11.50mm 12.90mm 14.50mm 17.50mm 20.40mm 23.25mm 24.00mm 26.50mm 29.50mm 32.75mm 36.00mm

Pg Steel Conduit (80°)

Pitch 1.50mm 1.50mm 2.00mm 1.50mm 2.00mm 2.00mm 1.50mm 1.50mm 1.50mm

Tapping Drill 18.50mm 20.50mm 22.00mm 23.50mm 25.00mm 28.00mm 30.50mm 38.50mm 48.50mm

1.25mm 1.50mm

12.80mm 16.50mm

TPI 8 8 8 8

Tapping Drill 38.00mm 41.50mm 44.50mm 47.50mm

* Metric Conduit

Tap Size 11⁄8” 11⁄4” 13⁄8” 11⁄2”

All sizes are “suggested sizes” only and may be varied to suit individual requirements

TPI 13 12 11 10 9 8 7 7 6 6 5 4.5 4.5

Tapping Drill 10.80mm 12.20mm 13.50mm 16.50mm 19.50mm 22.25mm 25.00mm 28.00mm 30.75mm 34.00mm 39.50mm 45.00mm 52.00mm

Tap Size

TPI

Tapping Drill

Tap Size

TPI

Tapping Drill

Pg7

20

11.30mm

Pg21

16

26.80mm

Pg9

18

13.90mm

Pg29

16

35.50mm

Pg11

18

17.30mm

Pg36

16

45.50mm

Pg13.5

18

19.10mm

Pg42

16

52.50mm

Pg16

18

21.20mm

Pg48

16

57.80mm

Tap Size ⁄16”* 3 ⁄32”* 1 ⁄8” 5 ⁄32”* 3 ⁄16” 7 ⁄32”* 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” * Whit.Form 1

Tap Size 3 ⁄16” 7 ⁄32” 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” 9 ⁄16” 5 ⁄8”

TPI 60 48 40 32 24 24 20 18 16 14 12

TPI 32 28 26 22 20 18 16 16 14

BSW British Standard Whitworth (55°) Tapping Drill Tap Size TPI 9 1.20mm ⁄16” 12 5 1.85mm ⁄8” 11 3 2.55mm ⁄4” 10 7 3.20mm ⁄8” 9 3.70mm 1” 8 4.50mm 11⁄8” 7 5.10mm 11⁄4” 7 6.50mm 11⁄2” 6 7.90mm 13⁄4” 5 9.30mm 2” 41⁄2 10.50mm 21⁄4” 4 BSF British Standard Fine (55°) Tapping Drill Tap Size 11 4.00mm ⁄16” 3 4.60mm ⁄4” 7 5.30mm ⁄8” 6.80mm 1” 8.30mm 11⁄8” 9.70mm 11⁄4” 11.10mm 11⁄2” 12.70mm 13⁄4” 14.00mm 2”

TPI 14 12 11 10 9 9 8 7 7

Tapping Drill 12.10mm 13.50mm 16.25mm 19.25mm 22.00mm 24.75mm 28.00mm 33.50mm 39.00mm 44.50mm 51.00mm

Tapping Drill 15.50mm 16.75mm 19.75mm 22.75mm 25.50mm 28.50mm 34.50mm 41.00mm 47.00mm

BSPP (Parallel) British Standard Pipe (55°) RP Series Tap Size

TPI

Tapping Drill

Tap Size

TPI

Tapping Drill

⁄4” 3 ⁄8” 1 ⁄2” 5 ⁄8” 3 ⁄4”

19 19 14 14 14

11.50mm 15.00mm 18.50mm 20.50mm 24.00mm

⁄8” 1” 11⁄4” 11⁄2” 13⁄4”

14 11 11 11 11

27.75mm 30.25mm 39.00mm 45.00mm 50.50mm

1

7

The little things, but not every thing. No matter what your thing, get it @ ATOM


Tapping Drill Sizes

Tapping Drill Sizes TPI 32 32 32 28

UNEF Unified National Form (60°) Tapping Drill Tap Size 5 5.70mm ⁄8” 3 7.25mm ⁄4” 8.85mm 1” 11.80mm –

TPI 24 20 20 –

Tapping Drill 15.00mm 18.00mm 24.30mm –

Tap Size

TPI

G (BSPF) ISO G Parallel Series (55°) Tapping Drill Tap Size

TPI

Tapping Drill

G1⁄16” G1⁄8” G1⁄4” G3⁄8” G1⁄2” G5⁄8” G3⁄4”

28 28 19 19 14 14 14

6.80mm 8.80mm 11.80mm 15.25mm 19.00mm 21.00mm 24.50mm

14 11 11 11 11 11 11

28.25mm 30.75mm 39.50mm 45.50mm 51.00mm 57.00mm 72.10mm

Tap Size 1 ⁄4” 5 ⁄16” 3 ⁄8” 1 ⁄2”

Tap Size Rc 1⁄16” Rc 1⁄8” Rc 1⁄4” Rc 3⁄8” Rc 1⁄2”

Tap Size ⁄16” 1 ⁄8” 1 ⁄4” 3 ⁄8” 1 ⁄2” 1

Tap Size 0 1 2 3 4 5 6 7 8

Tap Size Rp 1⁄8” Rp 1⁄4” Rp 3⁄8” Rp 1⁄2” Rp 3⁄4”

Tap Size ⁄8” 1 ⁄4” 1

TPI 28 28 19 19 14

TPI 27 27 18 18 14

G7⁄8” G1” G11⁄4” G11⁄2” G13⁄4” G2” G21⁄2”

Pitch 0.25mm 0.25mm 0.25mm 0.30mm 0.35mm 0.35mm 0.35mm 0.40mm 0.45mm 0.40mm

Drill & Reamer 23.0 28.5 37.0 43.5 55.0

Tap Size #1 (0.073) #2 (0.086) #3 (0.099)

TPI 72 64 56

Tapping Drill 1.55mm 1.40mm 1.20mm 1.05mm 0.98mm 0.80mm 0.70mm 0.60mm –

#4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164)

48 44 40 36

2.60mm 2.90mm 3.20mm 3.90mm

#1 (0.073) #2 (0.086) #3 (0.099) #4 (0.112) #5 (0.125) #6 (0.138) #8 (0.164)

64 56 48 40 40 32 32

1.70mm 2.00mm 2.30mm 2.60mm 2.90mm 3.20mm 3.80mm

5

⁄8” ⁄32” 3 ⁄16”

40 32 24

2.90mm 3.60mm 4.30mm

⁄8” ⁄4” 3 ⁄8” 1 ⁄2”

28 19 19 14

9.25mm 12.50mm 16.00mm 20.00mm

Drill Only 23.75 30.00 38.50 44.50 56.00

Drill & Reamer 23.0 29.0 38.0 44.0 55.0

Drill Only 6.30 8.70 11.10 14.50 18.00

NPT-NPTF National Pipe Taper 1:16 (60°) Drill & Reamer Tap Size TPI 3 6.0 ⁄4” 14 8.2 1” 11.5 10.8 11⁄4” 11.5 14.0 1.5” 11.5 17.5 2” 11.5

Drill Only 23.25 29.00 38.00 44.00 56.00

Pitch 0.0394” 1.00mm 0.0354” 0.90mm 0.0319” 0.81mm 0.0287” 0.73mm 0.0260” 0.66mm 0.0232” 0.59mm 0.0209” 0.53mm 0.0189” 0.48mm 0.0169” 0.43mm

TPI 28 19 19 14 14

TPI 27 18

Pitch 0.0154” 0.39mm 0.0138” 0.35mm 0.0122” 0.31mm 0.0110” 0.28mm 0.0098” 0.25mm 0.0091” 0.23mm 0.0083” 0.21mm 0.0075” 0.19mm –

Rp (BSPP) Sealing Pipe Thread Parallel (55°) Tapping Drill Tap Size TPI 8.60mm Rp 1” 11 11.50mm Rp 11⁄4” 11 15.00mm Rp 11⁄2” 11 18.50mm Rp 2” 11 24.00mm – – NPSF National Pipe Straight (60°) Tapping Drill Tap Size 3 8.60mm ⁄8” 1 11.30mm ⁄2”

TPI 18 14

Tapping Drill Sizes – Thread Forming Tap Size M1 M1.1 M1.2 M1.4 M1.6 M1.7 M1.8 M2.0 M2.2 M2.3

Drill Only 6.40 8.40 11.20 14.75 18.25

BA 47.5° Tapping Drill Tap Size 5.10mm 9 4.50mm 10 4.00mm 11 3.40mm 12 3.00mm 13 2.65mm 14 2.30mm 15 2.05mm 16 1.80mm –

All sizes are “suggested sizes” only and may be varied to suit individual requirements

Thread Forming – Fluteless Taps Metric Coarse Tapping Drill Tap Size 0.90mm M2.5 1.00mm M2.6 1.10mm M3 1.28mm M3.5 1.45mm M4 1.55mm M5 1.65mm M6 1.80mm M8 2.00mm M10 2.10mm M12 UNF Tapping Drill Tap Size 1.70mm #10 (0.190) 2.00mm #12 (0.216) 1 2.30mm ⁄4”

Rc Series (BSPT) ISO Rc Taper Series 1:16 (55°) Drill & Reamer Tap Size TPI 6.2 Rc 3⁄4” 14 8.4 Rc 1” 11 10.8 Rc 11⁄4” 11 14.5 Rc 11⁄2” 11 18.0 Rc 2" 11

Tapping Drill 30.25mm 39.00mm 45.00mm 56.50mm –

Tapping Drill 14.50mm 18.00mm

5

1

1

1

⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” UNC #10 (0.190) #12 (0.216) 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” BSW 1 ⁄4” 5 ⁄16” 3 ⁄8” G (BSPF) 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 5

Pitch 0.45mm 0.45mm 0.50mm 0.60mm 0.70mm 0.80mm 1.00mm 1.25mm 1.50mm 1.75mm

Tapping Drill 2.30mm 2.40mm 2.80mm 3.20mm 3.70mm 4.60mm 5.50mm 7.40mm 9.30mm 11.20mm

TPI 32 28

Tapping Drill 4.50mm 5.10mm

28 24 24 20 20

6.00mm 7.50mm 9.00mm 10.60mm 12.10mm

24 24 20 18 16 14 13

4.40mm 5.00mm 5.80mm 7.30mm 8.80mm 10.20mm 11.70mm

20 18 16

5.80mm 7.30mm 8.80mm

14 14 14 11

22.00mm 25.50mm 29.25mm 32.00mm

The tapping drill sizes indicated are recommended as a guide only. always check specific sizes as per manufacturer.

1800 999 024 | atom.com.au | getit@atom.com.au

285


Straight & Spiral Flute Ground Thread Tapes

5

Taps & Dies

Taps & Dies are CUTTING TOOLS THAT ARE USED TO CUT SCREW THREADS.

To create a Female thread, begin by drilling a pilot hole of the correct diameter. Then use a Taper, Intermediate and bottoming Tap, in that order. Taper taps (and to a lesser degree, intermediate taps) have tapered edges to enable the tapping process to start easily. Bottoming taps have no tapered edges and are used to finish the job. Taps come with either straight or spiral flutes to facilitate the removal of cut material called swarf. When chasing spark plug threads to remove carbon build-up, ensure you use a chasing tap which will not remove material from the thread. To cut the matching male thread we use a tool called a Die. The two main forms are button dies which have a circular shape, and hex dies which are six sided. Specialised dies come in different shapes such as Warragul and conduit dies which are square. Dies cut a thread along the outside of a cylindrical rod. This forms a male thread which functions like a bolt. When cutting thread from bare stock, button dies are used as they have an adjustment screw allowing tolerances to be adjusted base on the job requirements. Hex dies are used for chasing existing threads and cleaning damaged threads. Taps and dies come in both carbon steel (CS ) and high speed steel (HSS ). CS is suitable for cutting softer materials and is lower in cost so it is ideal for odd jobs and maintenance. When cutting harder materials or using the tool frequently, choose HSS. Always use Lubrication when cutting threads. This keeps the workpiece and tool cool which extends tool service life, and aids in the removal of the swarf created during the cutting process.

Adjusting Screw

Ground Thread Taps – Metric, Coarse • • • •

High speed steel (HSS) Straight and spiral flutes Spiral flute taps designed for blind hole tapping General purpose use for materials up to 1,000N/mm²

Diameter 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 27mm 30mm 33mm 36mm 39mm 42mm 45mm 48mm 52mm

286

Pitch 0.40 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00 4.00 4.50 4.50 5.00 5.00

Straight – Taper Part Number Product Code T3840200 92998000 T3840250 92998001 T3840300 92998002 T3840350 92998003 T3840400 88894150 T3840450 92998004 T3840500 88894151 T3840600 2817004 T3840700 88890769 T3840800 2817016 T3840900 92998005 T3841000 2817034 T3841100 92998006 T3841200 2817052 T3841400 2818010 T3841600 2818022 T3841800 2818034 T3842000 2818046 T3842200 2818058 T3842400 2819010 T3842700 92998007 T3843000 88893237 T3843300 92998008 T3843600 88837382 T3843900 92998009 T3844200 88837885 T3844500 92998010 T3844800 92998011 T3845200 92998012

• Suitable for both hand and machine operations • Left hand and gun taps available on request • Other sizes available on request as special manufactured Straight – Intermediate Product Code Part Number T3850200 92998013 T3850250 92998014 T3850300 88858113 T3850350 92990013 T3850400 92990082 T3850450 92998015 T3850500 92998016 T3850600 2817005 T3850700 92998017 T3850800 2817017 T3850900 92998018 T3851000 2817035 T3851100 92998019 T3851200 2817053 T3851400 2818011 T3851600 2818023 T3851800 2818035 T3852000 2818047 T3852200 2818059 T3852400 2819011 T3852700 92998020 T3853000 88893238 T3853300 92998021 T3853600 88837383 T3853900 92998022 T3854200 92990036 T3854500 92990139 T3854800 92998023 T3855200 92998024

Straight – Bottoming Product Code Part Number T3860200 92998025 T3860250 92998026 T3860300 60012783 T3860350 92998027 T3860400 88895563 T3860450 92998028 T3860500 92998029 T3860600 2817006 T3860700 92998030 T3860800 2817018 T3860900 92998031 T3861000 2817036 T3861100 92998032 T3861200 2817054 T3861400 2818012 T3861600 2818024 T3861800 2818036 T3862000 2818048 T3862200 2818060 T3862400 2819012 T3862700 92998033 T3863000 88893239 T3863300 92998034 T3863600 88837384 T3863900 92998035 T3864200 88837884 T3864500 88821310 T3864800 92998036 T3865200 92998037

Straight – Sets Product Code Part Number T9010200 92990047 T9010250 92980077 T9010300 92990064 T9010350 92990065 T9010400 3022002 T9010450 3022007 T9010500 3022012 T9010600 3022017 T9010700 3022022 T9010800 3022032 T9010900 3022037 T9011000 3022052 T9011100 3030002 T9011200 3030011 T9011400 3030020 T9011600 3030026 T9011800 3031005 T9012000 3031011 T9012200 3031017 T9012400 3031026 – – – – – – – – – – – – – – – – – –

The little things, but not every thing. No matter what your thing, get it @ ATOM

Spiral Flute – Blind Hole Product Code Part Number – – T3970250 92998044 T3970300 92998045 T3970350 92998046 T3970400 92990003 – – T3970500 80701001 T3970600 2817001 – – T3970800 2817013 – – T3971000 2817031 – – T3971200 2817049 T3971400 2818007 T3971600 2818019 T3971800 2818031 T3972000 2818043 T3972200 92998047 T3972400 80701002 – – T3973000 92998048 – – – – – – – – – – – – – –


Straight Ground Thread Taps

5

Ground Thread Taps – Metric, Fine • • • •

Straight flutes General purpose use for materials up to 1,000N/mm² Suitable for both hand and machine operations Spiral flute and gun taps available on request

Taper Diameter 5mm 6mm 8mm 8mm 10mm 10mm 10mm 12mm 12mm 12mm 14mm 14mm 14mm 16mm 16mm 16mm 18mm 18mm 20mm 20mm 20mm 22mm 22mm 24mm 24mm 25mm 27mm 30mm 30mm 32mm 40mm

Pitch 0.50 0.75 0.75 1.00 0.75 1.00 Spark Plug 1.25 1.00 1.25 Spark Plug 1.50 1.00 1.25 Spark Plug 1.50 1.00 1.25 1.50 Conduit 1.25 1.50 Spark Plug 1.25 1.50 Conduit 2.00 1.50 2.00 1.50 2.00 1.50 Conduit 2.00 1.50 2.00 1.50 Conduit 1.50 Conduit

Product Code – – – T4010805 – T4011005 T4011006 – T4011206 T4011207 – T4011406 T4011407 – – T4011607 – T4011807 – T4012007 – T4012207 – – T4012408 – – T4013007 – – –

Part Number – – – 2817010 – 2817022 2817028 – 2817040 2817046 – 2817058 2818004 – – 2818016 – 2818028 – 2818040 – 2818052 – – 2819004 – – 60017157 – – –

Intermediate Product Code Part Number – – – – – – T4020805 2817011 – – T4021005 2817023 T4021006 2817029 – – T4021206 2817041 T4021207 2817047 – – T4021406 2817059 T4021407 2818005 – – – – T4021607 2818017 – – T4021807 2818029 – – T4022007 2818041 – – T4022207 2818053 – – – – T4022408 2819005 – – – – T4023007 60017158 – – – – – –

Product Code T4030503 T4030604 T4030804 T4030805 T4031004 T4031005 T4031006 T4031205 T4031206 T4031207 T4031405 T4031406 T4031407 T4031605 T4031606 T4031607 T4031806 T4031807 T4032006 T4032007 T4032008 T4032207 T4032208 T4032407 T4032408 T4032507 T4032708 T4033007 T4033008 T4033207 T4034007

Bottoming Part Number 92998059 88844186 92998060 2817012 92998061 2817024 2817030 92998062 2817042 2817048 92998063 92998058 2818006 92998065 92998064 2818018 92998066 2818030 92998068 2818042 92998295 2818054 92998069 92998070 2819006 92998071 92998072 60017159 60012784 92998073 92998074

Sets Product Code – – – T9020805 – T9021005 T9021006 – T9021206 T9021207 – T9021406 T9021407 – – T9021607 – T9021807 – T9022007 – T9022207 – – T9022408 – – – – – –

Part Number – – – 3022027 – 3022042 3022047 – 3030005 3030008 – 3030014 3030017 – – 3030023 – 3031002 – 3031008 – 3031014 – – 3031023 – – – – – –

Ground Thread Taps – UNC, Coarse • • • • •

Straight flute General purpose use for materials up to 1,000N/mm² Suitable for both hand and machine operations Spiral flute and gun taps available on request Other sizes available on request as special manufactured

Taper

Intermediate

Bottoming

Sets

Diameter

TPI

Product Code

Part Number

Product Code

Part Number

Product Code

Part Number

Product Code

Part Number

#3 #4 #5 #6 #8 3 ⁄16” (UNS) #10 #12 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” 9 ⁄16” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄8” 11⁄4” 11⁄2”

48 40 40 32 32 24 24 24 20 18 16 14 13 12 11 10 9 8 7 7 6

T4140251 T4140284 T4140318 T4140351 T4140417 T4140476 T4140483 T4140549 T4140635 T4140794 T4140953 T4141111 T4141270 T4141429 T4141588 T4141905 T4142223 T4142540 T4142858 T4143175 T4143810

92998096 92998097 92998098 92998099 92998100 92998103 92998101 92998102 2834028 2834034 2834040 2834046 2834052 2835004 2835010 2835016 2835022 2835028 2835034 2835040 2835052

T4150251 T4150284 T4150318 T4150351 T4150417 T4150476 T4150483 T4150549 T4150635 T4150794 T4150953 T4151111 T4151270 T4151429 T4151588 T4151905 T4152223 T4152540 T4152858 T4153175 T4153810

92998104 92998105 92998106 92998107 92998108 92998111 92998109 92998110 2834029 2834035 2834041 2834047 2834053 2835005 2835011 2835017 2835023 2835029 2835035 2835041 2835053

T4160251 T4160284 T4160318 T4160351 T4160417 T4160476 T4160483 T4160549 T4160636 T4160795 T4160953 T4161111 T4161270 T4161429 T4161588 T4161905 T4162223 T4162540 T4162858 T4163175 T4163810

92998112 92998113 92998114 92998115 92998116 92998119 92998117 92998118 2834030 2834036 2834042 2834048 2834054 2835006 2835012 2835018 2835024 2835030 2835036 2835042 2835054

– T9030284 T9030318 T9030351 T9030417 T9030476 T9030483 T9030549 T9030635 T9030794 T9030953 T9031111 T9031270 T9031429 T9031588 T9031905 T9032223 T9032540 – T9033175 T9033810

– 92998120 92998121 88898040 60012785 92998123 60012786 92998122 3021001 3021004 3021007 3021010 3021013 3021016 3021019 3021022 3021025 3021028 – 92998124 92998125

1800 999 024 | atom.com.au | getit@atom.com.au

287


Straight Flute Ground Thread Taps

5

Ground Thread Taps – UNF, Fine • • • • •

Straight flutes General purpose use for materials up to 1,000N/mm² Suitable for both hand and machine operations Spiral flute and gun taps available on request Other sizes available on request as special manufactured Taper

Diameter #3 #4 #5 #6 #8 3 ⁄16” #10 #12 1 ⁄4” 5 ⁄16” 3 ⁄8” 7 ⁄16” 1 ⁄2” 9 ⁄16” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 1”(UNS) 11⁄8” 11⁄4” 11⁄2”

TPI 56 48 44 40 36 32 (UNS) 32 28 28 24 24 20 20 18 18 16 14 12 14 12 12 12

Product Code T4310251 T4310284 T4310318 T4310351 T4310417 T4310476 T4310483 T4310549 T4310635 T4310794 T4310953 T4311111 T4311270 T4311429 T4311588 T4311905 T4312223 T4312540 T4312541 T4312858 T4313175 T4313810

Part Number 92998146 92998147 92998148 92998149 92998150 92998152 92998151 92980061 2842028 2842034 2842040 2842046 2842052 2843004 2843010 2843016 2843022 2843028 3022053 2843034 2843040 2843052

Product Code T4320251 T4320284 T4320318 T4320351 T4320417 T4320476 T4320483 T4320549 T4320635 T4320794 T4320953 T4321111 T4321270 T4321429 T4321588 T4321905 T4322223 T4322540 T4322541 T4322858 T4323175 T4323810

Intermediate Part Number 92998153 92998154 92998155 92998156 92998157 92998160 92998158 92998159 2842029 2842035 2842041 2842047 2842053 2843005 2843011 2843017 2843023 2843029 3022054 2843035 2843041 2843053

Product Code T4330251 T4330284 T4330318 T4330351 T4330417 T4330476 T4330483 T4330549 T4330635 T4330794 T4330953 T4331111 T4331270 T4331429 T4331588 T4331905 T4332223 T4332540 T4332541 T4332858 T4333175 T4333810

Bottoming Part Number 92998161 92998162 92998163 92998164 92998165 92998167 92998166 92980060 2842030 2842036 2842042 2842048 2842054 2843006 2843012 2843018 2843024 2843030 3022055 2843036 2843042 2843054

Product Code – T9040284 T9040318 T9040351 T9040417 T9040476 T9040483 T9040549 T9040635 T9040794 T9040953 T9041111 T9041270 T9041429 T9041588 T9041905 T9042223 T9042540 T9042541 – – –

Sets

Bottoming Part Number 3022005 3022010 3022015 3022020 60012787 3022025 92990181 3022030 3022035 3022040 92998278 92998279

Product Code T9090973 T9091316 T9091666 T9092096 T9092291 T9092644 – T9093325 – – – –

Part Number – 92998168 92998169 92998170 92998171 92998173 88888491 92998172 3021002 3021005 3021008 3021011 3021014 3021017 3021020 3021023 3021026 3021029 92998174 – – –

Ground Thread Pipe Taps – Parallel Thread, G (BSPF) • • • •

High speed steel (HSS) Straight flutes General purpose use for materials up to 1,000N/mm² Suitable for both hand and machine operations

• Spiral flute and gun taps available on request • Other sizes available on request as special manufactured

Taper Diameter 1 ⁄8” 1 ⁄4” 3 ⁄8” 1 ⁄2” 5 ⁄8” 3 ⁄4” 7 ⁄8” 1” 11⁄4” 11⁄2” 13⁄4” 2”

TPI 28 19 19 14 14 14 14 11 11 11 11 11

Product Code T4790973 T4791316 T4791666 T4792096 T4792291 T4792644 T4793020 T4793325 T4794191 T4794780 T4795375 T4795961

Part Number 3022003 3022008 3022013 3022018 92998271 3022023 92998272 3022028 3022033 3022038 92998273 3022043

Product Code T4800973 T4801316 T4801666 T4802096 T4802291 T4802644 T4803020 T4803325 T4804191 T4804780 T4805375 T4805961

Intermediate Part Number 3022004 3022009 3022014 3022019 92998274 3022024 92998275 3022029 3022034 3022039 92998276 3022044

Product Code T4810973 T4811316 T4811666 T4812096 T4812291 T4812644 T4813020 T4813325 T4814191 T4814780 T4815375 T4815961

Sets Part Number 92988104 30000484 92998343 92990132 82100100 191919 – 60017196 – – – –

Ground Thread Pipe Taps – Tapered Thread, NPSF/ NPT/ NPTF/ Rc (BSPT) • • • • •

High speed steel (HSS) Straight flutes General purpose use for materials up to 1,000N/mm² Suitable for both hand and machine operations Spiral flutes and gun taps available on request

Diameter 1 ⁄8” 1 ⁄4” 3 ⁄8” 1 ⁄2” 3 ⁄4” 1” 11⁄4” 11⁄2”

288

TPI 27 18 18 14 14 111⁄2 111⁄2 –

NPSF Bottoming Part Number Product Code T4861029 92980000 T4861372 92980036 T4861715 92998280 T4862134 92998281 – – – – – – – –

Product Code T4871029 T4871372 T4871715 T4872134 T4872667 T4873340 T4874216 –

NPT Bottoming Part Number 3031003 3031006 3031009 3031012 3031015 3031018 3031021 –

NPTF Bottoming Product Code Part Number T4881029 92998282 T4881372 92998283 T4881715 92998284 T4882134 92998285 – – – – – – – –

Rc (BSPT) Bottoming Product Code TPI Part Number T4750973 28 3030003 T4751316 19 3030006 T4751666 19 3030009 T4752096 14 3030012 T4752644 14 3030015 T4753325 11 3030018 T4754191 11 3030021 T4754780 11 3030024

The little things, but not every thing. No matter what your thing, get it @ ATOM


Tap Wrenches, Die Nuts & Tap & Drill Sets

Always Use Lube

5

Quality, Application, Cleanliness

Threading Quality To ensure that you’re creating a high quality thread, it’s important that you use a lubricant for any tapping or threading operation. Your results can be affected by the type of lubricant used, so be sure to explore your options to find the most suitable product.

Lubricant ACTION Cutting fluids are designed to cool, lubricate and remove swarf and contaminants from the area. By adhering to both the tool and the work surface, they prevent friction and can also absorb excess heat during tapping and threading.

Lubricant Application After selecting a suitable cutting lubricant, it also has to be used correctly. You won’t get anywhere with just a drop of lube if you’re doing a big job. Be sure that lubricant is consistently in place where the metal is being cut through the whole process – not just at the start.

Lubricant Cleanliness Cutting fluids must always be used clean. Lubricants containing contaminants or swarf can cause damage to your tool or workpiece. Develop a procedure for the care of cutting fluids and their systems through regular maintenance and replacement.

Tap Wrenches

Die Nut Sets

• T-Type wrenches are used for holding taps and small tools and in confined spaces • Ratchet T-Type wrenches offer additional functionality with a two-way ratchet action

• Made from carbon alloy steel • Metal case • Individual carbon die nuts available on request

Product Code

Size

Range

Part Number

M9010635 M9011270 M9010002 M9030635 M9031270 M9031200L M905BT00 M905BT0 M904BT5 M904BT6 M904BT7 M904BT8

T-Type T-Type T-Type 2 Piece Set – M6 & M12 Ratchet T-Type Ratchet T-Type Ratchet T-Type, Long Reach 280mm 00 Bar Type 0 Bar Type #5 Bar Type #6 Bar Type #7 Bar Type #8 Bar Type

M3 – M6 (1⁄8” – 1⁄4”) M6 – M12 (1⁄4” – 1⁄2”) M3 – M12 (1⁄8” – 1⁄2”) M3 – M6 (1⁄8” – 1⁄4”) M6 – M12 (1⁄4” – 1⁄2”) M6 – M12 (1⁄4” – 1⁄2”) M1.5 – M6 (1⁄16” – 1⁄4”) M3 – M10 (1⁄8” – 3⁄8”) M5 – M16 (3⁄16” – 5⁄8”) M6 – M20 (1⁄4” – 3⁄4”) M8 – M28 (5⁄16” – 11⁄8”) M20 – M38 (3⁄4” – 11⁄2”)

2846003 2846004 34340001 93070006 88838361 34340002 2845005 2845004 2845006 2845007 2845008 2845009

Die Nuts • Designed for cleaning and resizing existing damaged threads • General purpose/DIY use only • Not suitable for precision, safety or critical thread

Product Code

Size

M4400500 M4400600 M4400700 M4400800

M5 x 0.80P M6 x 1.00P M7 x 1.00P M8 x 1.25P

Part Number 2825001 2825007 2825013 2825025

Product Code

Size

M4401000 M4401200 M4401600 M4402000

M10 x 1.50P M12 x 1.75P M16 x 2.00P M20 x 2.50P

20908005 Product Code

Description

Size Range

Part Number

M454SDN1 M454SDN2 M454SDN3 M454SDN4

16 Piece Set – Metric 10 Piece Set – BSW 10 Piece Set – UNC 10 Piece Set – UNF

M5 – M20 1 ⁄4” – 1” 1 ⁄4” – 1” 1 ⁄4” – 1”

20908005 92980098 20909006 20910006

Tap & Drill Sets – Metric, Coarse, Straight Flute • General purpose use for materials up to 1,000N/mm² • Suitable for both hand and machine operations • High speed steel (HSS) 14 Piece Set: • 7 x intermediate taps – M3, M4, M5, M6, M8, M10, M12 • 7 x tapping drills – 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 & 10.2mm 28 Piece Set: • 21 x taper, intermediate & bottoming taps – M3, M4, M5, M6, M8, M10, M12 • 7 x tapping drills – 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 & 10.2mm

Part Number 2825049 2826013 2826043 2827001

92980106 Product Code

Description

Part Number

T3850014 T901SDT1

14 Piece Tap & Drill Set, ABS Case 28 Piece Tap & Drill Set, ABS Stand

60017115 92980106

1800 999 024 | atom.com.au | getit@atom.com.au

289


Die Nuts & Die Nut Holders, Sets & Tap & Die Sets

5

Die Holders

Tap & Die Sets – Metric/UNC/UNF

• Incorporated taper screws allow the user to make minor adjustments to the button die, ensuring accurate thread size • Knurling screw provides positive finger grip • Made from tool steel, hardened for long life

• Made from M2 high speed steel (HSS) offering the best combination of strength, heat and wear resistance • Metal case • Individual HSS button dies available on request Includes: • 1” die holder • #0 bar-type tap wrench • 7 x intermediate taps • 7 x 1” button dies • Thread pitch gauge • Sample cutting paste

Product Code

Size

M9072540

1”

Part Number 2845001

M9063810

11⁄2”

2845002

M9065180

2”

2845003

M9066350

21⁄2”

36002664

M9067620

3”

212775

Product Code

Description

M551M18

Metric

M561NC18 M564NF18

UNC UNF

• Chrome steel • Die outside dimensions: 23⁄8” x 23⁄8” x 3⁄4” • Die guides available on request

Contents M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75 #8, #10, 1⁄4”, 5⁄16”, 3⁄8”, 7⁄16”, 1⁄2” #8, #10, 1⁄4”, 5⁄16”, 3⁄8”, 7⁄16”, 1⁄2”

Part Number 30004396 30004397 30004398

Tap & Die Sets – Metric/UNC/UNF/BSW • • • •

Die Nuts & Holder

30004396

Made from carbon alloy steel All sets contain bar type tap wrench, die holder and thread gauge Metal case Individual carbon button dies available on request

60017254

Product Code Size Metric Conduit 2662808 M16 x 1.5P 2662817 M20 x 1.5P 2662826 M25 x 1.5P 2662835 M32 x 1.5P Rc Series (BSPT) 1 ⁄8” x 28tpi 2671706 1 2671715 ⁄4” x 19tpi 3 2671724 ⁄8” x 19tpi 1 2671733 ⁄2” x 14tpi 3 2671742 ⁄4” x 14tpi 2671751 1” x 11tpi 2671760 11⁄4” x 11tpi Warragul Ratchet Die Holder 3007757 23⁄8” x 23⁄8” x 3⁄4”

Part Number 2812019 2812021 2812023 2812025 2812001 2812003 2812005 2812007 2812011 2812013 2812015 2812027

Die Nut Sets – With Holder • Chrome steel • All sets include dies, matching guides and a warragul ratchet die holder

Product Code

Description

Tap Range

M500M12 M500M16 M500M26 M500M46 M500M35 M500MMF47 M500NC12 M500NC25 M500NC35 M500NCF52 M500NF35

12 Piece Set – Metric 16 Piece Set – Metric 26 Piece Set – Metric 46 Piece Set – Metric 35 Piece Set – Metric Coarse 47 Piece Set – Metric Coarse & Fine 12 Piece Set – UNC 25 Piece Set – UNC 35 Piece Set – UNC 52 Piece Set – UNC/UNF 35 Piece Set – UNF

M500NFM33

33 Piece Set – UNF/Metric Coarse

M500NFM52

52 Piece Set – UNF/Metric Coarse

M500W15 M500W35

15 Piece Set – BSW 35 Piece Set – BSW

M500WM52

52 Piece Set – BSW/Metric Coarse

M500WNF52

52 Piece Set – BSW/UNF

M6 – M12 M3 – M12 M2 – M6 M2 – M12 M6 – M24 M6 – M18 1 ⁄4” – 1⁄2” 1 ⁄4” – 3⁄4” 1 ⁄4” – 1” 1 ⁄4” – 3⁄4” 1 ⁄4” – 1” 1 ⁄4” – 1⁄2” M6 – M12 1 ⁄4” – 3⁄4” M6 – M18 1 ⁄8” – 3⁄8” 1 ⁄4” – 1” 1 ⁄4” – 3⁄4” M6 – M20 1 ⁄4” – 3⁄4”

Die Holder 1” 1” 1” 1” 1” & 2” 1” & 2” 1” 1” & 2” 1” & 2” 1” & 2” 1” & 2”

#5

1”

92988090

#6

1” & 2”

60017254

0 0 & #7

1” 1” & 2”

92980038 88858964

#6

1” & 2”

92988110

#6

1” & 2”

92988111

Tap & Die Set – 115 Piece, Metric & Imperial • Tungsten steel • Comes in durable plastic case Includes: • 48 x button dies • 48 x thread taps • 2 x die handles • 2 x tap wrenches • T-type tap wrench • 2 x screw pitch gauges • Centre punch • 5 x drills • 5 x screw extractors

290

Tap Wrench 0 0 00 00 & 0 0 & #7 #6 0 #6 0 & #7 #6 0 & #7

Product Code

Description

Part Number

3003931 3003959 3003904

7 Piece Set, BSPT – 1⁄2”, 3⁄4” & 1” 12 Piece Set, BSPT – 1⁄4”, 3⁄8”, 1⁄2”, 3⁄4”, 1” & 11⁄4” 9 Piece Set, Metric Conduit – 16, 20, 25 & 32mm (1.5mm Pitch)

92980099 92980062 92980086

60012511

The little things, but not every thing. No matter what your thing, get it @ ATOM

Part Number 92980125 92980104 20908001 20908003 20915001 92980093 60021419 20916001 20916003 20918002 20917003


Pipe Threaders & Thread Files Pipe Threader & Dies

Thread Files – Internal/External

65R-TC

• For repair and clean-up of damaged, worn and rusty thread pitches • Restores damaged left and right-hand threads

• • • • •

Jam-proof True centering workholder Right hand only Comes with one set of high speed dies Pipe capacity: 25 – 50mm (1” – 2”)

Product Code

Description

Size

36570 65345

NPT BSPT

25 – 50mm 25 – 50mm

Part Number 1536005 1536004

Description Metric Imperial

Part Number

Description

Part Number

3038030 3038031

Whitworth Gas Thread

3038032 3038033

Pipe Threader & Dies

Thread Files – Internal/External

• • • •

• Restores damaged left and right-hand internal and external threads • Also makes an ideal thread gauge

Ratchet knob indicates forward and reverse Die head snaps in from both sides and locks in place Other manual pipe threaders available Dies sold separately

5

1523001

Die Heads

BSPT

NPT Part Number

Product Code

Size

Product Code

⁄8” ⁄4” 3 ⁄8” 1 ⁄2” 3 ⁄4” 1” 11⁄4” 11⁄2” 2”

65950 65955 65960 65965 65970 65975 65980 65985 65990

Product Code

Description

30118

12R Manual Pipe Threader – Ratchet & Handle Only

1 1

1522001 1522003 1522005 1522007 1522009 1522011 1522013 1522015 1522017

37375 37380 37385 37390 37395 37400 37405 37410 37415

Part Number 1522002 1522004 1522006 1522008 1522010 1522012 1522014 1522016 1522018

Product Code

Description

Part Number

SCMT70553 SCMT70554

Metric ISO: 80, 100, 125, 150, 175, 200, 250 & 300 Imperial UNC – UNF: 11, 12, 13, 14, 16, 18, 20 & 25tpi

91920046 91920047

Thread Files – External • Restores damaged left and right-hand external threads • Also makes an ideal thread gauge

Part Number 1523001

Pipe Threader Sets • All matched threader sets include die heads, ratchet assembly, ratchet handle and alloy dies • Comes with carry case

Product Code

Description

Part Number

SCMT70450 SCMT70449

Metric Pitch: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50 & 3.00 Imperial UNC/UNF: 11, 12, 13, 14, 16, 18, 20 & 25tpi

91920006 91920000

Threaded Nut Insert Setting Tool Kit EC-2745 • Designed for the permanent fitment of threaded nut inserts in materials 0.5 – 3.25mm in thickness Includes: • 4, 5, 6 and 8mm nutserts • Compartmented carry box 1536003 Product Code

Description

Size

Part Number

36475 36505 65255 65285

NPT Pipe Threader Set NPT Pipe Threader Set BSPT Pipe Threader Set BSPT Pipe Threader Set

12 – 50mm 3 – 50mm 12 – 50mm 3 – 50mm

1536001 92410027 1536002 1536003

93168109

1800 999 024 | atom.com.au | getit@atom.com.au

291

Profile for ATOM

Drilling & Threading | ATOM  

ATOM stocks a range of drilling and threading products from quality brands. However, if what you need is not in here, we can still source it...

Drilling & Threading | ATOM  

ATOM stocks a range of drilling and threading products from quality brands. However, if what you need is not in here, we can still source it...