Page 1


4

Cutting Abrasives CUTTING Cut-Off Discs  Chop Saw Discs  Diamond Blades  Circular Saw Blades  Jigsaw Blades  Reciprocating Saw Blades 

228 – 231 231 232 – 234 235 – 236 236 – 237 237

SURFACE REMOVAL Carbide Burrs  Carbide Burr Sets  Mounted Points 

238 – 239 240 240

GRINDING Grinding Discs  Grinding Wheels  Fibre Backed Discs  Flap Discs  Diamond Cup Wheels 

241 – 242 242 242 – 243 244 – 245 246

WIRE BRUSHES Wire Wheel Brushes  Wire Cup Brushes  Wire End Brushes  Wire Hand Brushes 

246 – 249 249 250 – 251 251

SURFACE PREPARATION & FINISHING Preparation Discs  252 Finishing Discs  253 – 255 Backing Pads  255 Sanding Pads & Sheets  256 Sanding Rolls  256 Linishing Belts  257 – 258 Sanding Bands  259 Spiral Band Holders  260 SANDBLASTING Sandblasting Accessories  Sandblasting Cabinets  Sandblasting Systems  Sandblasting Abrasives 

260 260 260 261


How To Select Abrasives

4

THE COMPLETE Abrasives Cheat Sheet Don’t let abrasives grind you down. Glide through them without any friction using this handy cheat sheet. Specification Breakdown All abrasive discs are manufactured with a specification that allows you to quickly identify features about the disc. The following diagram, based on EN 12413, will make it easy for you to find the abrasives you need to get the job done. Remember, each manufacturer may do things differently, so be sure to check their guides out!

41

A

46

R

BF

60

Shape/Profile

Abrasive Type

Grit Size

Hardness Grade

Bond Type

Max. Operating Speed

A–Z Classified using the a lphabet from softest to hardest (A to Z). C heck supplier specsfor more details.

B – Fibre reinforced resinoid bond with cloth

41 – Flat

A – Aluminium Oxide

42 – Depressed Centre

C – Silicon Carbide

27 – Depressed Centre (Grinding)

ZA – Zirconium Alumina CO – Ceramic Oxide

Fine – 80-100 Medium – 30-60 Coarse – 16-24

Maximum operating speed o f disc (rpm). Do not exceed this speed.

BF – Resinoid bond &other duroplastic o rganic bonds

It’s easy @ ATOM We’ve sifted through this data so you don’t have to. Use it as a guide to help you compare different products to find the one that will best fit your needs. Here’s how to read our breakdown: A – Abrasive Type G – Grit Size H – Hardness Grade SF – Suitable For (the most suitable materials for that disc to work on)

Keep an eye out for the Specifications in the tech data of each product!

Cut-Off Discs – Flat

• Manufactured without –addition Cut-Off Discs Flat of ferrous, sulphurous and • chlorinated fillers andaddition will notofcause Manufactured without ferrous,rust sulphurous andfast chlorinated • Provides cuttingfillers and and longwilllifenot cause rust Provides • fast cutting and long life • Suitable for cutting of steel, sectional for cutting of steel, sectional Suitable and • solid materials and solid materials Specifications: Specifications: • A – • Aluminium Oxide Oxide A – Aluminium • G – • 24G&– 46 24 & 46 H – Medium-Hard • • H – Medium-Hard Steel & Stainless Steel SF – & • SF –• Steel Stainless Steel

Product Code

Specification

EHT 125-2.4 A46 Inox Product 61721122 Code Specification

PUT IT To Practice

Dia. x Thick x Bore

Max. Speed

Part Number

61728122 61721122

EHT 230-2.5 PPSF Inox EHT 125-2.4 A46A24Inox

125 x 22mm Dia.x x2.4Thick x Bore12,200rpm Max. Speed79016243 Part Number 230 125x x2.52.4x 22mm x 22mm 6,600rpm 12,200rpm 79016244 79016243

61728122

EHT 230-2.5 A24 PPSF Inox

230 x 2.5 x 22mm

6,600rpm

79016244

Aluminium Oxide

Most common abrasive. Good for grinding carbon steel, alloy steel, high speed steel, annealed malleable iron, wrought iron and bronzes.

Silicon Carbide

Used for grinding grey iron, chilled iron, brass, soft bronze and aluminium as well as stone, rubber and other non-ferrous materials.

Zirconium Alumina Tough and durable for rough applications such as cut-off operations on a broad range of steels and steel alloys. Ceramic Oxide

High purity, fractures at a controlled rate at the sub-micron level, hard and strong. Used for demanding applications on steel and alloys.

Grit Size Abrasive Grade

Grit size simply refers to the abrasive grade of a product. In general, the higher the grade, the smaller in size the abrasive grain is and the smoother the finish will be.

Hardness Grade Soft Grade

Designed to release new grains quickly, will remove the maximum stock while creating the least amount of heat in the base material.

Hard Grade

Slowly sheds its dull grains making it durable. Removes less stock than its soft-grade counterpart but increases the amount of heat in the base material.

Bond Type

226

Vitrified

Rigid, strong and porous. Not affected by water, acid, oil or variations in temperature.

Resinoid

Synthetic resin, suitable for applications that require rapid stock removal and where a cleaner finish is required. Designed to operate at high speeds.

Rubber

Offers smooth grinding action, suitable for applications that require a smooth finish.

Buy Bulk & Save

Abrasive Type

CUT & GRIND A LOT? Ask ATOM how BUY BULK & SAVE can help you in the workplace. It’s part of our promise to save you on the total cost of managing the little things.

The little things, but not every thing. No matter what your thing, get it @ ATOM


Cut-Off & Grinding Disc Safety

4

Cut-Off & Grinding Discs Safety Dos

Don’ts

Handle and store discs carefully. If possible, keep discs in their original packaging Inspect your discs for any damage before mounting. If damaged, dispose of the disc

Don’t store discs in any situation in which they may become damaged, such as damp atmospheres or extreme temperatures

Use a safety guard that is correctly positioned and secured

Don’t use or mount a damaged disc Don’t exceed the maximum operating speed printed on the disc

Always ensure your equipment is switched ‘off’ and unplugged from the socket before changing the disc

Don’t force discs onto your equipment Don’t use discs without proper ventilation

Ensure the speed of your equipment does not exceed the maximum operating speed printed on the disc Let newly mounted discs run at operating speed for a reasonable time before any cutting or grinding Always wear appropriate personal protective equipment such as safety glasses or goggles, dust mask, gloves, ear plugs and safety shoes Ensure work piece is firmly secured while it is being cut or grinded Keep your working area clutter-free around any cutting or grinding operations

Don’t apply extreme pressure to the disc so that the driving motor decelerates Don’t stop the disc by applying pressure to the edge or face. Instead switch off equipment and allow disc to stop revolving Don’t let disc become trapped or pinched in the cut Don’t use a machine that is in poor mechanical condition Don’t forget to wear appropriate personal protective equipment such as safety glasses or goggles, dust mask, gloves, ear plugs and safety shoes

For more information or any safety related questions, contact your Industrial Safety Experts today! Call 1800 999 125 or visit atomise.com.au ATOMise Taking Safety Seriously 1800 999 024 | atom.com.au | getit@atom.com.au

227


Cut-Off Discs – Flat, Ultra Thin

4

CUT-OFF DISCS – FLAT, ULTRA THIN

Cut-Off Discs – Flat, Ultra Thin • Cut your costs and use the right wheel for steel • Designed for best performance on steel sheets and sections Specifications: • A: Aluminium oxide • G: 60 • H: Medium-hard • SF: Steel & stainless steel

• Ultra thin for ultra fast cutting • Complies with Australian Standard AS1788.1-1987 & EN12413 Specifications: • A: Aluminium oxide • G: 54 • H: Medium • SF: Steel, stainless steel & aluminium

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

69121029 61730010 61719010

EHT 100-1.0 A60 P PSF STEEL EHT 115-1.0 A60 P PSF STEEL EHT 125-1.0 A60 P PSF STEEL

100 x 1.0 x 16mm 115 x 1.0 x 22mm 125 x 1.0 x 22mm

15,300rpm 13,300rpm 12,200rpm

79912677 79912678 32000558

Cut-Off Discs – Flat, Ultra Thin, Small Diameter

Specification

Dia. x Thick x Bore

Max. Speed

Quantity

Part Number

41 A54 P BF 41 A54 P BF 41 A54 P BF 41 A54 P BF

100 x 1.0 x 16mm 115 x 1.0 x 22mm 125 x 1.0 x 22mm 125 x 1.0 x 22mm

15,200rpm 13,300rpm 12,250rpm 12,250rpm

1 1 1 Pack of 10

65010010 65010038 65021060 65021062

Cut-Off Discs – Flat, Ultra Thin • Specifically formulated ultra thin disc for aluminium • Totally free from waxes or fillers • More cuts per wheel without any undesirable residues • Can be welded immediately after cutting Specifications: • A: Aluminium oxide • G: 46 & 60 • H: Soft • SF: Aluminium & non-ferrous metals

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

61339430 61340415 61340425 61341115 61341225

EHT 100-1.0 A60N SG ALU EHT 115-1.0 A60 N SG ALU EHT 115-1.6 A46 N SG ALU EHT 125-1.0 A60 N SG ALU EHT 125-1.6 A46 N SG ALU

100 x 1.0 x 16mm 115 x 1.0 x 22mm 115 x 1.6 x 22mm 125 x 1.0 x 22mm 125 x 1.6 x 22mm

15,300rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm

141878 60019728 88853400 88853402 88853403

Cut-Off Discs – Flat, Ultra Thin • Manufactured without addition of ferrous, sulphurous and chlorinated fillers (will not cause rust) • Suitable for cutting of metal, sheet profiles and solid materials Specifications: • A: Aluminium oxide • G: 46 & 60 • H: Hard • SF: Steel & stainless steel

228

• For multi-purpose cutting work • Designed for hard-to-reach places • For use on electric and air-powered straight grinders of all output categories • Can be used with mounted arbor on straight grinders Specifications: • A: Aluminium oxide • G: 46 & 60 • H: Medium-hard • SF: Steel, stainless steel, cast iron & non-ferrous metals Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

65503010 65503020 65504010 65504020 65505000 65505010 65505020 65505030 65506000 65506001 65506011 65506021 65507001 65507011 65507021 65508000 65508001 65508009 65508008 65508021

EHT A60 P SG EHT A60 P SG EHT A60 P SG EHT A46 P SG EHT A60 P SG EHT A60 P SG EHT A46 P SG EHT A46 P SG EHT A60 P SG EHT A60 P SG EHT A60 P SG EHT A46 P SG EHT A60 P SG EHT A60 P SG EHT A46 P SG EHT A60 P SG EHT A60 P SG EHT A60 P SG EHT A60 P SG EHT A46 P SG

30 x 1.1 x 6mm 30 x 1.4 x 6mm 40 x 1.1 x 6mm 40 x 2.1 x 6mm 50 x 1.1 x 6mm 50 x 1.4 x 6mm 50 x 2.1 x 6mm 50 x 3.0 x 6mm 65 x 1.1 x 6mm 65 x 1.1 x 10mm 65 x 1.4 x 10mm 65 x 2.1 x 10mm 70 x 1.1 x 10mm 70 x 1.4 x 10mm 70 x 2.1 x 10mm 76 x 1.1 x 6mm 76 x 1.1 x 10mm 76 x 0.8 x 6mm 76 x 0.8 x 10mm 76 x 2.1 x 10mm

31,800rpm 31,800rpm 23,900rpm 23,900rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 14,700rpm 14,700rpm 14,700rpm 14,700rpm 13,600rpm 13,600rpm 13,600rpm 12,500rpm 12,500rpm 12,500rpm 12,500rpm 12,500rpm

36004117 36004118 36004119 36004120 92600111 36004121 248715 36004122 92600112 36004123 36004124 36004125 36004126 36004127 36004128 92600044 79912676 79912675 36004129 253975

Arbors

Shank Size

Suited Hole Size

33510000 33511000 33512000 33513000

6mm 1 ⁄4” 6mm 1 ⁄4”

6mm 6mm 10mm 10mm

Part Number 242789 211021 253976 184937

Cut-Off Discs – Flat, Ultra-Thin

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

61315113 61340412 61340422 61341112 61341122 61343122 61328702

EHT 105-1.0 A60R SG INOX EHT 115-1.0 A60R SG INOX EHT 115-1.6 A46R SG INOX EHT 125-1.0 A60R SG INOX EHT 125-1.6 A46R SG INOX EHT 178-1.6 A46 S SGP INOX EHT 230-1.9 A46 S SGP INOX

105 x 1.0 x 16mm 115 x 1.0 x 22mm 115 x 1.6 x 22mm 125 x 1.0 x 22mm 125 x 1.6 x 22mm 178 x 1.6 x 22mm 230 x 1.9 x 22mm

14,500rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm 8,600rpm 6,600rpm

92600038 92600023 92608084 88850865 88893233 92600052 92600040

• For cordless angle grinders • Sharper, faster cutting grain for longer battery life • Harder grain improves wheel life • Sharper grain delivers less vibration Specifications: • A: Zirconia aluminia • G: 46 • H: Hard • SF: Steel & stainless steel Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66253370632 66253370633

Z46X-BF41 Z46X-BF41

115 x 1.0 x 22mm 125 x 1.0 x 22mm

13,300rpm 12,250rpm

30001531 30001530

The little things, but not every thing. No matter what your thing, get it @ ATOM


Cut-Off Discs – Flat CUT-OFF DISCS – FLAT

Cut-Off Discs – Flat • Manufactured without addition of ferrous, sulphurous and chlorinated fillers • Provides fast cutting and long life • Suitable for cutting of steel, sectional and solid materials Specifications: • A: Aluminium oxide • G: 24 & 46 • H: Medium-hard • SF: Steel & stainless steel

• Long life • Complies with Australian Standard AS1788.1-1987 and EN12413 Specifications: • A: Aluminium oxide • G: 54 • H: Medium • SF: steel, stainless steel & aluminium

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

41 A54 P BF 41 A54 P BF 41 A54 P BF 41 A54 P BF 41 A54 P BF

125 x 1.6 x 22.0mm 125 x 2.5 x 22.0mm 125 x 3.0 x 22.0mm 230 x 2.5 x 22.0mm 356 x 3.0 x 25.4mm

12,250rpm 12,250rpm 12,200rpm 6,600rpm 4,400rpm

65010058 65010060 65014058 65010090 65010210

Cut-Off Discs – Flat • For cutting all ferrous metals Specifications: • A: Aluminium oxide • G: 30 & 36 • H: Medium • SF: Steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841558 66252841560 66252841561 66252841563 66252841566 66252841574 66252841576 66252841584

FH38-A36S-BF41 FH38-A36S-BF41 FH38-A36S-BF41 FH38-A36S-BF41 FH38-A36S-BF41 FH38-A36S-BF41 FH38-A36S-BF41 FZ40-A30V-BF41

100 x 2.5 x 16.0mm 115 x 2.5 x 22.0mm 125 x 2.5 x 22.0mm 150 x 2.5 x 22.0mm 180 x 2.5 x 22.0mm 230 x 2.5 x 22.0mm 230 x 2.5 x 25.4mm 230 x 3.1 x 22.0mm

15,300rpm 13,330rpm 12,250rpm 10,200rpm 8,500rpm 6,650rpm 6,650rpm 6,650rpm

92600041 92600071 92600025 92600051 92600031 92608011 92608012 92608014

Cut-Off Discs – Flat • Free of iron Specifications: • A: Aluminium oxide • G: 24 • H: Hard • SF: Steel & stainless steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252919957 66252919978 66252920011 66252920042 66252920067

A24V-BF41 M/INOX A24V-BF41 M/INOX A24V-BF41 M/INOX A24V-BF41 M/INOX A24V-BF41 M/INOX

100 x 2.5 x 16mm 115 x 2.5 x 22mm 125 x 2.5 x 22mm 180 x 2.5 x 22mm 230 x 2.5 x 22mm

15,300rpm 13,000rpm 12,250rpm 8,500rpm 6,650rpm

92608025 92608026 92600091 92600060 92608027

Still confused about which disc type to use? Ask ATOM!

4

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

61721122 61728122

EHT 125-2.4 A46 Inox EHT 230-2.5 A24 PPSF Inox

125 x 2.4 x 22mm 230 x 2.5 x 22mm

12,200rpm 6,600rpm

79016243 79016244

Cut-Off Discs – Flat • Faster cutting with little burr formation • Suitable for use with angle grinders of all power outputs • For cutting of sheet metal, profiles and solid steel Specifications: • A: Aluminium oxide • G: 24 & 46 • H: Medium-hard • SF: Steel & stainless steel Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

61741116 61730026 61719026 61726222 61728222

EHT 100 2.4 A46 P PSF EHT 115 2.4 A46 P PSF EHT 125 2.4 A46 P PSF EHT 178 3.0 A24 P PSF EHT 230 3.0 A24 P PSF

100 x 2.4 x 16mm 115 x 2.4 x 22mm 125 x 2.4 x 22mm 178 x 3.0 x 22mm 230 x 3.0 x 22mm

15,300rpm 13,300rpm 12,200rpm 8,600rpm 6,600rpm

92640041 92608082 92600010 907001 935001

Cut-Off Discs – Flat • For cutting stainless steel and very hard ferrous metals • Free of iron Specifications: • A: Aluminium oxide • G: 36 • H: Medium • SF: Steel & stainless steel Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841607 66252841608 66252841610 66252841612 66252841613 66252841614

FH38-A36S-BF41 I/F FH38-A36S-BF41 I/F FH38-A36S-BF41 I/F FH38-A36S-BF41 I/F FH38-A36S-BF41 I/F FH38-A36S-BF41 I/F

100 x 2.5 x 16mm 115 x 2.5 x 22mm 125 x 2.5 x 22mm 150 x 2.5 x 22mm 180 x 2.5 x 22mm 230 x 2.5 x 22mm

15,300rpm 13,330rpm 12,250rpm 10,200rpm 8,500rpm 6,650rpm

92600042 92608015 92600000 92608016 92600024 92600027

Cut-Off Discs – Flat, High Performance • High cutting performance and long tool life • Manufactured without addition of ferrous, chlorinated and sulphurous fillers Specifications: • A: Aluminium oxide • G: 24 & 46 • H: Hard • SF: Steel & stainless steel Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

69120745 61340432 61331432 61326422 61328422

EHT A46R SG-INOX EHT A46R SG-INOX EHT A46R SG-INOX EHT A24R SG-INOX EHT A24R SG-INOX

100 x 2.4 x 16mm 115 x 2.4 x 22mm 125 x 2.4 x 22mm 178 x 2.5 x 22mm 230 x 2.5 x 22mm

15,300rpm 13,300rpm 12,200rpm 8,600rpm 6,600rpm

92608083 917001 924001 903001 931001

1800 999 024 | atom.com.au | getit@atom.com.au

229


Cut-Off Discs – Flat, Ultra-Thin & Depressed Centre

4

Cut-Off Discs – Flat, High Performance

Cut-Off Discs – Ultra-Thin, Tradies • • • •

One wheel for all materials Free of iron Ideal for tradies Suitable for metal, stainless, aluminium, masonry, PVC, ceramic and more Specifications: • A: Silicone carbide • G: 30 • H: Soft • SF: Multi-material

• Free of iron and sulphur • For cutting stainless steel and very hard ferrous metals Specifications: • A: Aluminium oxide • G: 46 & 60 • H: Hard • SF: Steel & stainless steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841585 66252841587 66252841588 66252919966 66252919970 66252841591 66252919991 66252841598 66252841599 66252920038 66252920062 66252833242

A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A46T-BF41 M/INOX A60V-BF42-M/INOX

100 x 1.0 x 16mm 100 x 1.6 x 16mm 100 x 2.0 x 16mm 115 x 1.0 x 22mm 115 x 1.6 x 22mm 115 x 2.0 x 22mm 125 x 1.0 x 22mm 125 x 1.6 x 22mm 125 x 2.0 x 22mm 180 x 2.0 x 22mm 230 x 2.0 x 22mm 125 x 0.8 x 22mm

15,300rpm 15,300rpm 15,300rpm 13,330rpm 13,330rpm 13,330rpm 12,250rpm 12,250rpm 12,250rpm 8,500rpm 6,650rpm 12,250rpm

92608022 92600069 92608023 92600043 92600072 92608024 92600039 92600057 92600058 92600067 92600090 92608072

Cut-Off Discs – Flat, Rail Cutting • Aggressive cutting • Optimum tool life • Optimum cutting results are achieved with powerful drive systems • Complies with Australian Safety Standard AS 1788.1 Specifications: • A: Aluminium oxide • G: 24 • H: Medium-hard • SF: Rail cutting & steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66253370634 66253370635 66253370636

C30P-BF27 C30P-BF27 C30P-BF27

100 x 1.0 x 16mm 115 x 1.0 x 22mm 125 x 1.0 x 22mm

15,300rpm 13,300rpm 12,250rpm

30001532 30001533 30001534

Cut-Off Discs – Depressed Centre • Free of iron and sulphur • For cutting stainless steel and very hard ferrous metals Specifications: • A: Aluminium oxide • G: 24 • H: Hard • SF: Steel & stainless steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252919658 66252919661 66252919677 66252919704

A24V-BF42 M/INOX A24V-BF42 M/INOX A24V-BF42 M/INOX A24V-BF42 M/INOX

125 x 2.5 x 22mm 125 x 3.0 x 22mm 180 x 2.5 x 22mm 230 x 3.0 x 22mm

12,250rpm 12,250rpm 8,500rpm 6,650rpm

92608065 92608066 92608067 92608070

Cut-Off Discs – Depressed Centre

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

69902464 69902463

EHT A24Q SG-RAIL EHT A24Q SG-RAIL

350 x 4.5 x 25.4mm 400 x 4.5 x 25.4mm

5,500rpm 4,800rpm

92600059 258145

• For cutting structural steel, sheet metals and ferrous metals Specifications: • A: Aluminium oxide • G: 24 & 30 • H: Medium, hard • SF: Steel & cast iron

Cut-Off Discs – Flat, Rail Cutting • Specially made for rail cutting using special formulations enabling fast burn-free cutting using hand held demolition machines • Also suitable for harder materials Specifications: • A: Aluminium oxide • G: 24 • H: Medium • SF: Rail cutting & steel

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841702 66252841707 66252841679 66252841685 66252841691

A30S A30S-BF42 A24/30T A24/30T A24/30T

100 x 3.4 x 16.0mm 115 x 3.4 x 22.0mm 125 x 3.4 x 22.2mm 180 x 3.4 x 22.2mm 230 x 3.4 x 22.2mm

15,300rpm 13,000rpm 12,250rpm 8,500rpm 6,650rpm

92608054 88838100 8883802 88895356 92608055

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

Cut-Off Discs – Depressed Centre

66252841631 66252841632 66252832796 66252841634

2UE790QR 2UE790QR A24QBF41/100 A24QBF41/100

350 x 3.8 x 20.0mm 350 x 3.8 x 25.4mm 350 x 4.0 x 25.4mm 400 x 4.0 x 25.4mm

5,500rpm 5,500rpm 5,500rpm 4,800rpm

92608040 9260000 92608051 60013792

• Free of iron • For cutting stainless steel and very hard ferrous metals • Suitable for notching Specifications: • A: Aluminium oxide • G: 24 & 30 • H: Hard • SF: Steel & stainless steel

Block out those annoying workmates (and the workshop noise) with hearing protection on page 48 230

Product Code

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841738 66252841740 66252841743 66252841747 66252841750

A30S-BF42 I/F A30S-BF42 I/F A24/30T-BF42 I/F A24/30T-BF421/F A24/30T-BF42 I/F

100 x 3.4 x 16mm 115 x 3.4 x 22mm 125 x 3.4 x 22mm 180 x 3.4 x 22mm 230 x 3.4 x 22mm

15,300rpm 13,300rpm 12,250rpm 8,500rpm 6,650rpm

92608059 92608060 92600056 92600068 92608061

The little things, but not every thing. No matter what your thing, get it @ ATOM


Cut-Off, Cutting & Grinding & Chop Saw Discs – Depressed Centre & Flat Cut-Off Discs – Depressed Centre

4

Chop Saw Discs – Flat

• Free of iron and sulphur • For cutting stainless steel and very hard ferrous metals Specifications: • A: Aluminium oxide • G: 46 • H: Hard • SF: Steel & stainless steel

• • • •

Optimum tool life Optimum cutting results Suitable for cutting of solid material, sections and pipes Optimum cutting results are achieved on stationary high-performance machines Specifications: • A: Aluminium oxide • G: 24 • H: Medium-hard • SF: Solid stainless steel & cast iron

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252919654

A46T-BF42 M/INOX

125 x 2.0 x 22mm

12,250rpm

92608058

Cutting & Grinding Discs – Depressed Centre, Dual Purpose • For cutting, light grinding and polishing • Free of iron, sulphur and chlorine Specifications: • A: Aluminium oxide • G: 46 • H: Medium • SF: Stainless steel, metal & masonry

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66323024 66323730 66325825 66324140 66325205 66397706

EHT A24Q SG-HD EHT A24Q SG-HD EHT A24Q SG-HD EHT A24S SG-HD EHT A24Q SG-HD EHT A24N SG-HD

300 x 3.6 x 25.4mm 350 x 4.0 x 25.4mm 400 x 4.8 x 25.4mm 400 x 4.6 x 40.0mm 500 x 5.8 x 40.0mm 600 x 7.6 x 60.0mm

6,400rpm 5,500rpm 4,800rpm 4,800rpm 3,800rpm 3,200rpm

36004281 92600017 92600018 36004130 36004131 36004132

Chop Saw Discs – Flat

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841761 66252841762 66252841763

A46S-BF A46S-BF A46S-BF

100 x 2.2 x 16mm 115 x 2.2 x 22mm 125 x 2.2 x 22mm

15,300rpm 13,300rpm 12,250rpm

92608124 92600104 92600105

• Fast cutting of solid material, sections and pipes • Reduced burr • Long tool life Specifications: • A: Aluminium oxide • A: Aluminium oxide • G: 36 • G: 36 • H: Very soft • H: Very soft • SF: Solid steel • SF: Premium steel

• • • •

Cutting & Grinding Discs – Depressed Centre, Dual Purpose

A: Aluminium oxide G: 36 H: Very soft SF: Premium stainless steel

DUODISC® • 2 in 1 high performance disc • Fast and convenient in cutting and light grinding • Unsurpassed quality and safety due to robust design Specifications: • A: Aluminium oxide • G: 46 • H: Medium-hard • SF: Steel, stainless steel, cast iron & non-ferrous metals

General Purpose Steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

62010630 62011620 62012630 62012620

E 100-1.9 A 46 P PSF-INOX DUO E 115-2.8 A 46 P PSF-INOX DUO E 125-1.9 A 46 P PSF-INOX DUO E 125-2.8 A 46 P PSF-INOX DUO

100 x 1.9 x 16mm 115 x 2.8 x 22mm 125 x 1.9 x 22mm 125 x 2.8 x 22mm

15,300rpm 13,300rpm 12,200rpm 12,200rpm

79912673 79912674 60021227 94740158

Is your angle or bench grinder lacking some grunt? Upgrade to an industrial strength tool today! Find them in the Power Tools section starting from page 293

Premium Steel

Premium Stainless Steel

Product Code

Description

Dia. x Thick x Bore

Max. Speed

Part Number

66323074 66323574 66323070 69620704 69620717 66324091 69620735

General Purpose Steel General Purpose Steel Premium Steel Premium Steel Premium Stainless Steel Premium Stainless Steel Premium Stainless Steel

300 x 2.8 x 25.4mm 350 x 3.0 x 25mm 300 x 2.8 x 25mm 350 x 2.8 x 25.4mm 350 x 2.8 x 25.4mm 400 x 2.8 x 25.4mm 400 x 3.8 x 25.4mm

5,100rpm 4,400rpm 5,100rpm 4,400rpm 4,400rpm 3,800rpm 3,800rpm

939002 940001 92608095 939003 92918267 60021153 941001

Chop Saw Discs – Flat • Reinforced cut-off discs to suit low speed electric chop saws • 406mm wheel (92600026) suitable for Flexovit Mitrecut 400 and Supercut 400 cut-off machines Specifications: • A: Aluminium oxide • G: 36 • H: Medium • SF: Stainless steel

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841615 66252841617 66252841618

A36S-BF41 A36S-BF41 A36S-BF41

300 x 3.0 x 25.4mm 356 x 3.0 x 25.4mm 406 x 3.0 x 25.4mm

5,100rpm 4,400rpm 3,850rpm

92608049 92600050 92600026

1800 999 024 | atom.com.au | getit@atom.com.au

231


Diamond Blades – Segmented Rim

4

HOW TO Choose The Right Diamond Blade Before choosing your blade, you must first figure out what you will be cutting. Typically diamond blades will cut most things, but for the best result and maximum blade lifespan, cutting material should be matched in hardness to the blade as closely as possible. Hard Materials (e.g. granite, clay products, engineering brick) Use a soft bond disc. This bond will release the diamond grit at the optimum point of utilisation which prevents the blade from overheating. Medium-Hard Materials (e.g. concrete, building materials) Medium hard materials require an equally medium‑hard bond. This bond provides the right balance between exposure of the diamond grit and preservation of the disc life. Most universal blades have a medium-hard bond. Soft & Abrasive (e.g. bricks, blocks, roof tiles) A hard bond holds diamond grit longer, making it more productive. If you use a soft bond to cut through soft material the diamond grit will be lost before it has reached its maximum potential, drastically reducing cutting disc life. Wet or Dry? Diamond blades come in wet and dry varieties. Wet blades must always be used with water as a coolant, whilst dry blades can be used both with or without water. When choosing, take into consideration your cutting tool. If you are using a power tool, water presents the danger of getting into the electrics or power source. Wet Diamond Blades or dry blades used with water tend to cut deeper through each interval as they take longer to overheat, allowing for quicker cutting and a prolonged lifespan. Dry Diamond Blades must be used in lots of short intervals. These blades use the air around them to cool down and prevent them from overheating. For best heat management results, allow the blade to spin between each interval, allowing the air to flow freely through the blade reducing the heat. Continuous Rim Blades Continuous rim blades feature an unbroken diamond edge, designed for giving a clean cut through soft materials such as tiles and slate.

Diamond Blades – Segmented Rim, Dry • Dry application • Segmented • Suitable for medium-hard materials including; porous concrete, paving slabs, mortar, sandstone and brick

Product Code For Angle Grinders 2.608.603.833 2.608.602.191 2.608.602.192 2.608.602.194 2.608.602.195 2.608.602.549 2.608.603.630 For Petrol Saws 2.608.603.636

Description

Dia. x Thick. x Segment Height

Bore

Part Number

Standard Standard Standard Standard Standard Standard Universal

105 x 1.7 x 8mm 115 x 1.6 x 10mm 125 x 1.6 x 10mm 180 x 2.0 x 10mm 230 x 2.3 x 10mm 350 x 3.3 x 15mm 125 x 2.2 x 12mm

20/16mm 22.2mm 22.2mm 22.2mm 22.2mm 25.4mm 22.2mm

36003553 36003554 36003555 36003556 36003557 36003558 36003559

Universal

350 x 3.3 x 15mm

25.4mm

36003560

Diamond Blades – Segmented Rim, Dry • Dry application • Segmented • Suitable for medium-hard materials including; cement, concrete and fibre cement sheet

Product Code For Angle Grinders 2.608.602.196 2.608.602.197 2.608.602.200 For Petrol Saws 2.608.602.544 2.608.602.658

Description

Dia. x Thick x Segment Height

Bore

Part Number

Standard Standard Standard

115 x 1.6 x 10mm 125 x 1.6 x 10mm 230 x 2.3 x 10mm

22.2mm 22.2mm 22.2mm

36003549 36003550 36003551

Standard Universal

350 x 2.8 x 10mm 350 x 3.2 x 15mm

25.4mm 25.4mm

36003552 36003547

Diamond Blades – Segmented Rim, Wet Only • Wet application only • Special steel core reduces the noise output of the blade by approximately 15dBA • General purpose • 15mm segment height for excellent life • Professional quality • For masonry saws

Segmented Rim Blades Segmented rim blades also feature diamond edges similar to continuous rim blades. What differs is the cut outs that divide the rim into segments. This creates a more aggressive cut, making it suitable for tough materials such as brick or concrete.

232

Product Code

Dia. x Thick x Segment Height

Bore

Part Number

70184628998

350 x 3.6 x 15mm

25.4mm

92608135

The little things, but not every thing. No matter what your thing, get it @ ATOM


Diamond Blades – Segmented Rim Diamond Blades – Segmented Rim

Diamond Blades – Segmented Rim

• Wet or dry application • General purpose segmented rim tool • Diamond abrasive – for aggressive and fast cutting • High performance and long tool life • Suitable for angle grinders of all output levels

• • • •

Product Code

Dia. x Thick x Bore

Part Number

68300037 68300044

100 x 1.6 x 16mm 115 x 1.6 x 22mm

721022 721023

Wet or dry application Segmented Suitable for petrol saws Suitable for medium-hard materials, specifically for cutting asphalt

Product Code

Dia. x Thick x Bore

Part Number

Product Code

Description

Dia. x Thick x Segment Height

Bore

Part Number

68300045 68300039

125 x 1.9 x 22mm 230 x 2.3 x 22mm

721024 721026

2.608.602.625 2.608.603.642

Standard Best

350 x 3.2 x 10mm 400 x 3.2 x 12mm

25.4mm 25.4mm

36003548 36003546

Diamond Blades – Segmented Rim

Diamond Blades – Segmented Rim, Dry

• • • •

• Dry application • Soff-Cut XL Series • Blades feature unique triangular arbor configuration • 12 segments • Anti-ravel skid plate included 167828: • For cutting ultra-hard aggregate and non-abrasive sand 237080: • For cutting medium to hard aggregate and medium abrasive sand

Wet or dry application General purpose blade Laser welded, segmented Undercut protection ensures maximum blade life • For high speed demolition saws • Suitable for medium-hard materials • For use on concrete blocks and pavers, concrete roof tiles, green concrete, soft cured concrete and other abrasive materials

Product Code

Dia. x Thick x Segment Height

Bore

Part Number

70184624323

350 x 2.8 x 10mm

25.4/20.0mm

79014564

Product Code

Description

Dia. x Thick x Segment Height

542777005 542777007

XL6-1000 Purple Blade XL6-3000 Red Blade

152 x 2.4 x 7mm 152 x 2.4 x 7mm

Diamond Blades – Segmented Rim

Diamond Blades – Segmented Rim

• • • •

MT 15

Wet or dry application Laser welded, segmented Premium quality For high speed demolition saws, brick and floor saws up to 13hp • High rate of cut in a wide range of materials

4

Part Number 167828 237080

• Wet or dry application • Easy-fit centre hole • Good balance between performance and cost • Offers excellent safety and stability for more comfortable cutting • High speed in hard and universal construction materials

Product Code

Dia. x Thick x Segment Height

Bore

Part Number

70184624320 70184624321

350 x 2.8 x 10mm 400 x 3.2 x 10mm

25.4/20mm 25.0/20mm

79014569 36000725

Diamond Blades – Segmented Rim • • • •

Wet or dry application General purpose 10mm segment height for long life For angle grinders, circular saws and tile saws • Suitable for medium-hard materials • For use on cured concrete, clay bricks and pavers, concrete pipes and other medium to hard building materials

Product Code

Dia. x Thick x Segment Height

Bore

Part Number

501096801 501096802 501096803 501096804 501096805 501096806

105 x 2 x 11mm 115 x 2 x 11mm 125 x 2 x 11mm 150 x 2 x 11mm 180 x 2 x 11mm 230 x 2 x 11mm

22.2mm 22.2mm 22.2mm 25.4mm 25.4mm 25.4mm

36001035 36001036 237725 36001037 36001038 237726

Diamond Blades – Segmented Rim, Lightly Fluted Vari-Cut S35 • Wet or dry application • Combination blade offers excellent performance in a wide variety of materials • Variable bore diameter with removable spacer

Product Code

Dia. x Segment Height

Bore

Part Number

70184601084 70184601089 70184601086 70184601094 70184601087

105 x 10mm 115 x 10mm 125 x 10mm 180 x 10mm 230 x 10mm

20.0/16.0mm 22.0/20.0mm 22.2/20.0mm 25.4/22.2mm 25.4/22.2mm

36000714 35000871 35000872 36000718 36000715

Product Code

Diameter x Segment Height

Bore

Part Number

587905801 587905901

350 x 10mm 400 x 10mm

22.2/25.4mm 22.2/25.4mm

108311 30004997

1800 999 024 | atom.com.au | getit@atom.com.au

233


Diamond Blades – Segmented & Continuous Rim

4

Diamond Blades – Segmented Rim, Lightly Fluted

Diamond Blades – Continuous Rim, Fluted, Dry

• Wet or dry application • Patent pending depth indicator and ellipsoid gullet • Specially treated thicker steel centre for improved durability • For demo/brick/floor saws up to 25hp • Suitable for hard and medium-hard materials such as granite, cured and green concrete, steel and asphalt • One blade to cut all common building materials

MT 10 • Dry application • Fluted continuous rim • Incorporates a wave design in the blank for ultimate cooling capacity • Great versatility

Product Code

Dia. x Thick x Segment Height

Bore

Part Number

70184647279 70184643654 70184647280 70184646870 70184646154 70184647348

125 x 2.2 x 10mm 180 x 2.5 x 10mm 230 x 2.5 x 12mm 300 x 3.0 x 12mm 350 x 2.8 x 10mm 400 x 3.2 x 10mm

22.23mm 22.23mm 22.23mm 25.4/20mm 25.4/20mm 25.4/20mm

34700020 34700015 34700021 34700018 34700016 34700022

Diamond Blades – Continuous Rim, Dry • • • • •

Diameter x Thickness

Bore

Part Number

501096601 501096602 501096603 501096604 501096605

105 x 2mm 115 x 2mm 125 x 2mm 180 x 2mm 230 x 2mm

22.2mm 22.2mm 22.2mm 25.4mm 25.4mm

241497 241498 237727 237728 30006715

Diamond Blades – Continuous Rim, Fluted, Dry • Dry application • Suitable for building materials including porous concrete, paving slabs, sandstone and brick

Dry application Continuous Suitable for angle grinders Sintered cutting rim Suitable for medium-hard materials including; ceramic tiles and marble

Product Code

Diameter x Thickness

Bore

Part Number

2.608.603.834 2.608.602.201 2.608.602.202 2.608.602.205

105 x 1.7mm 115 x 1.6mm 125 x 1.6mm 230 x 1.6mm

20/16mm 22.2mm 22.2mm 22.2mm

36003542 36003543 36003544 36003545

Product Code

Diameter x Thickness

Bore

Part Number

2.608.603.835 2.608.602.393 2.608.602.394 2.608.602.397

105 x 1.7mm 115 x 2.0mm 125 x 2.0mm 230 x 2.5mm

20/16mm 22.2mm 22.2mm 22.2mm

36003561 36003562 36003563 36003564

Diamond Blades – Continuous Rim, Fluted, Dry • Dry application • Continuous edge tool for easy and quality cuts • For optimum cutting results and maximum safety • Recommended for ceramic tiles • Suitable for angle grinders of all output levels • Designed to cut concrete, brick, hard stone, granite and other hard construction materials

Diamond Blades – Continuous Rim, Dry • Dry application • Non-interrupted continuous rim provides the best solution when a chip-free edge is required • 7mm segment height boosts blade life

Product Code

Diameter x Thickness

Bore

Part Number

579819620 579819630 579819640 579819660 579819671 501096006

105 x 2mm 115 x 2mm 125 x 2mm 180 x 2mm 200 x 2mm 230 x 2mm

22.2mm 22.2mm 22.2mm 22.2mm 25.4mm 22.2mm

36001029 36001030 36001031 36001032 36001033 36001034

Diamond Blades – Continuous Rim • Wet or dry application • General purpose • For angle grinders, circular saws and tile saws • For use on ceramic tiles, hard stone, cement sheet, reconstituted stone and fibreglass

234

Product Code

Product Code

Diameter x Thickness

Bore

Part Number

70184601080 70184601085 70184601082

105 x 1.6mm 115 x 1.6mm 125 x 1.6mm

20/16mm 22/20mm 22/20mm

36000712 35000875 35000876

Product Code

Diameter x Thickness

Bore

68300036 68300042 68300043 68300050

100 x 1.9mm 115 x 1.9mm 125 x 1.9mm 230 x 2.6mm

16.0mm 22.2mm 22.2mm 22.2mm

Part Number 721027 721028 721029 721031

Diamond Blades – Continuous Rim, Fluted • • • •

Wet or dry application General purpose For angle grinders, circular saws and tile saws For use on slate, bricks, pavers, bluestone, terracotta, tiles, plastic pipes, granite and natural stone

Product Code

Diameter x Thickness

Bore

Part Number

70184601092 70184601093 70184601090 70184601083 70184601091

105 x 2.1mm 115 x 2.1mm 125 x 2.2mm 180 x 2.6mm 230 x 2.6mm

20/16mm 22/20mm 22/20mm 25.4/22mm 25.4/22mm

36000717 35000873 35000874 36000713 36000716

The little things, but not every thing. No matter what your thing, get it @ ATOM


Circular Saw Blades Circular Saw Blades – General Purpose

CIRCULAR SAW Blade Design

2.608.643.060 • • • • •

Teeth: 60 Diameter: 305mm (12”) Bore: 25.4mm Cut width: 2.2mm Suitable for soft steel, non-ferrous metals, pipes/profiles, sheet metals, rods and cable ducts

There are a range of different saw blade designs each developed with a specific purpose in mind. Generally, the shape and design of the blade will determine what materials it is best suited for. Standard circular saw blades can be used on multiple materials but are regularly used to cut wood or wood composites. Teeth The number of teeth on a blade determines the type of cut you will get. Fewer teeth provide a faster cut with a rougher finish. More teeth provide a slower cut with a cleaner finish.

211755

Circular Saw Blades – Wood • Ideal blades for fast cuts in all types of wood

Product Code

Diameter

Bore

Cut Width

Teeth

2.608.676.251 2.608.676.252

165mm (61⁄2”) 165mm (61⁄2”)

16mm 16mm

1.6mm 1.6mm

24 40

Part Number 259783 259784

Circular Saw Blades – Wood Speedline Saw Blades: • Fast blade for cuts along and across all types of wood

Optiline Saw Blades: • Precise blade for quality cuts in all types of wood

Flutes You may have noticed some blades are filled with holes surrounding the middle section of the blade, these are called flutes. Fluted blades allow for air to pass through the blade effectively causing a cooling effect and lowering heat. These flutes however increase the chance of chipping the cutting material and giving an uneven cut. Fluted blades are best suited for hard materials such as concrete, stone and brick where heat becomes an issue. Unfluted blades are most suited for softer materials where heat will not build up during the cut.

Circular Saw Blade Sets – 3 Piece, Wood • Circular saw blades for wood Speedline Set (60019596) Includes: • 1 x 16 tooth, 1 x 24 tooth, 1 x 40 tooth blades

Product Code

Diameter

Speedline – For Handheld Saws 2.608.642.352 160mm (61⁄4”) 2.608.642.353 160mm (61⁄4”) 2.608.642.354 184mm (71⁄4”) 2.608.642.355 184mm (71⁄4”) 2.608.642.357 210mm (81⁄4”) 2.608.642.358 235mm (91⁄4”) 2.608.642.359 235mm (91⁄4”) Optiline – For Handheld Saws 2.608.642.303 160mm (61⁄4”) 2.608.642.304 160mm (61⁄4”) 2.608.642.306 184mm (71⁄4”) 2.608.642.307 184mm (71⁄4”) 2.608.642.308 184mm (71⁄4”) 2.608.642.313 216mm (81⁄2”) 2.608.642.315 235mm (91⁄4”) 2.608.642.316 235mm (91⁄4”) 2.608.642.317 235mm (91⁄4”) Optiline – For Benchtop Saws 2.608.642.319 254mm (10”) 2.608.642.320 254mm (10”) 2.608.642.321 254mm (10”) 2.608.642.323 254mm (10”) 2.608.642.324 305mm (12”) 2.608.642.325 305mm (12”) 2.608.642.326 305mm (12”) 2.608.642.328 305mm (12”)

4

Bore

Cut Width

Teeth

Part Number

20/16mm 20/16mm 20/16mm 20/16mm 25/16mm 25/20/16mm 25/20/16mm

1.6mm 1.6mm 1.6mm 1.6mm 1.6mm 1.8mm 1.8mm

20 40 20 40 40 20 40

36003845 60019606 60019607 60019608 60019609 60019610 79011594

20/19/16mm 20/19/16mm 20/16mm 20/16mm 20/16mm 30/25mm 25/20/16mm 25/20/16mm 25/20/16mm

2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm

24 40 20 40 60 48 20 40 60

60019588 60019589 60019590 60019591 60019592 36003536 60019593 60019594 60019595

30/25.4/25mm 30/25.4/25mm 30/25.4/25mm 30/25.4/25mm 30/25.4/25/20mm 30/25.4/25/20mm 30/25.4/25/20mm 30/25.4/25/20mm

2.5mm 2.5mm 2.5mm 2.5mm 2.8mm 2.8mm 2.8mm 2.8mm

40 60 80 120 40 60 80 120

60019598 60019599 60019600 60019601 60019602 60019603 60019604 60019605

Optiline Set (60019597) Includes: • 1 x 20 tooth, 1 x 40 tooth, 1 x 60 tooth blades

Product Code

Diameter

Bore

Cut Width

Teeth

Part Number

2.608.642.333 2.608.642.336

184mm (71⁄4”) 235mm (91⁄4”)

20/16mm 25/20/16mm

2.5mm 2.5mm

16, 24 & 40 20, 40 & 60

60019596 60019597

Circular Saw Blades – Carbide Tips Aluminium+ Series • Negative hook angle prevents material self-feeding and gives maximum control over feed rate • Precision diamond ground tungsten carbide tip • Hardened and tempered steel body • Corrosion resistant coating • Suitable for aluminium, plastic and wood cutting

Product Code

Diameter

Bore

Teeth

Max. Speed

Part Number

T95009 T95135 T95049 T93016

184mm (71⁄4”) 235mm (91⁄4”) 254mm (10”) 305mm (12”)

20mm 25mm 30mm 25mm

64 84 100 100

7,000rpm 6,500rpm 6,000rpm 5,000rpm

92270098 92270062 92270191 88850589

1800 999 024 | atom.com.au | getit@atom.com.au

235


Circular Saw & Jigsaw Blades

4

Circular Saw Blades – Carbide Tips

Jigsaw Blades – Soft Wood

• Ultra fine carbide tips for accurate and precise cuts • Precision ground teeth for exceptional lifetime • Suitable for aluminium, plastics and wood

• 5 per pack

79013258 Product Code

Product Code

Diameter

For Handheld Saws 2.608.642.338 160mm (61⁄4”) 2.608.642.339 184mm (71⁄4”) 2.608.642.340 210mm (81⁄4”) 2.608.642.342 235mm (91⁄4”) For Benchtop Saws 2.608.642.341 216mm (81⁄2”) 2.608.642.344 254mm (10”) 2.608.642.346 254mm (10”) 2.608.642.347 305mm (12”) 2.608.642.348 305mm (12”) 2.608.642.350 305mm (12”)

Bore

Cut Width

Teeth

Part Number

20/19/16mm 20/16mm 25/16mm 25/16mm

2mm 2mm 2mm 2mm

60 60 60 80

60019611 60019612 60019613 60019614

30/25mm 30/25.4/25mm 30/25.4/25mm 25.4/20/16mm 25.4/20/16mm 25.4/20/16mm

2mm 2.7mm 2.7mm 2.7mm 2.7mm 2.7mm

80 80 120 60 80 120

60019615 60019616 60019618 60019619 220686 36003535

Basic For Wood 2.608.630.037 2.608.630.033 Clean For Wood 2.608.630.031 2.608.630.030 2.608.630.014

Description

Teeth Length

Part Number

T 119 B – Soft Wood Up To 15mm T 111 C – Soft Wood Up To 50mm, Fast Cut

92mm 74mm

79011544 60021401

T 101 AO – Soft Wood Up To 15mm, Clean & Curve Cuts 56mm T 101 B – Soft Wood & Plastics Up To 30mm, Clean Cuts 74mm

92270093 60021404

T 101 BR – Soft Wood & Laminates Up To 30mm, Clean Cuts

74mm

79011543

74mm 91mm

60021405 60021406

74mm 74mm

60021402 60021403

91mm

79013258

106mm

79013264

2.608.630.032 T 101 D – Soft Wood Up To 45mm, Clean Cuts 2.608.637.590 T 301 CD – Soft Wood Up To 65mm, Clean Cuts Speed For Wood 2.608.630.040 T 144 D – Soft Wood Up To 50mm, Fast Cut 2.608.630.058 T 244 D – Soft Wood Up to 50mm, Fast & Curve Cuts Progressor For Wood 2.608.633.528 T 234 X – Soft Wood Up To 65mm T 345 XF – Construction Wood With Nails (< 65 mm) 2.608.634.994 & Pipes/Profiles

Circular Saw Blades – Carbide Tips

Jigsaw Blades – Sheet Metal

Marathon® Series

• 5 per pack

• • • • •

For long life and durability without sacrificing speed Expansion control slots reduce warping and vibration Heat vents for heat and chip removal Precision ground teeth Brazed construction grade carbide steel

60021407 Product Code

Description

Teeth Length

Part Number

Basic For Metal 2.608.631.012 2.608.631.013 2.608.631.014

T 118 G – Sheet Metal Up To 1.5mm T 118 A – Sheet Metal Up To 3mm T 118 B – Sheet Metal Up To 6mm

67mm 67mm 67mm

60021407 60021408 60021409

T 318 A – Sheet Metal Up To 3mm & Pipes/Profiles (<65mm)

106mm

79013255

67mm

88898294

74mm

92260006

2.608.631.319 Product Code

Diameter

Bore

Teeth

Part Number

T9098014 T9098021 T9098023 T9098024

185mm (71⁄4”) 235mm (91⁄4”) 235mm (91⁄4”) 235mm (91⁄4”)

20mm 25mm 25mm 25mm

40 20 40 60

92270094 117003 92270323 117006

Flexible For Metal 2.608.634.505 T 118 AF – Sheet Metal Up To 3mm, Shatterproof Progressor For Metal 2.608.638.473

T 123 X – Sheet Metal (< 10 mm) & Pipes incl. Aluminium (< 30 mm), Shatterproof

Jigsaw Blade Set – 10 Piece

Does your site require non-sparking tools? Contact ATOM to find out about our range

2.607.010.657 • Clean cuts, speed cuts, curve cuts • Includes blades suitable for soft and hard wood, metal and aluminium Includes: • 2 x T 119 BO – Basic for wood • 2 x T 101 B – Clean for wood • 2 x T 144 D – Speed for wood • 2 x T 118 A – Basic for metal • 2 x T 127 D – Special for aluminium

Get ‘em @ ATOM 60021412

236

The little things, but not every thing. No matter what your thing, get it @ ATOM


Jigsaw & Reciprocating Saw Blades Jigsaw Blades – Special Purpose

Reciprocating Saw Blades – Metal

• 5 per pack

• Patented tooth design utilises sharper tooth geometry for faster cut rates • Aggressive shank angle increases tooth contact, maintaining cutting speed as blade wears for longer blade life • Special anti-stick coating minimises friction and gum-up for smoother cuts • 5 per pack

92260021

4

79011559 Product Code

Description

Special For Aluminium T127D – Aluminium Sheets (< 15mm) 2.608.631.017 & Pipes (< 30mm), Fast Cuts T227D – Aluminium Sheets (< 15mm) 2.608.631.030 & Pipes (< 30mm), Curve Cuts Special For Stainless Steel 2.608.636.420 T118EFS – Stainless Steel Sheets Up To 4mm, BiM Blade 2.608.630.663 T118AHM – Stainless Steel Sheets Up To 3mm, TC Blade Special For Acrylic 2.608.631.010 T101A – Polycarbonate, Perspex Up To 20mm, Clean Cuts Special For Ceramics T150RIFF – Soft Ceramic Wall Tiles, Glass Fibre 2.608.633.105 Reinforced Plastic, Cast Iron Up To 10mm, Fine Cut Special For Plasterboard/Cement Boards T141HM – Plasterboards/Cement Boards (<50mm), 2.608.633.175 Glass Fibre Reinforced Plastics (20mm), TC blade

Teeth Length

Part Number

74mm

60021410

74mm

92278086

57mm 59mm

79013267 92260054

74mm

92260021

59mm

79011559

74mm

92260096

92278413

Product Code

Length

Teeth

Part Number

DW4808 DW4811 DW4809

150mm 150mm 200mm

14TPI 18TPI 14TPI

92278413 92278254 92278428

Reciprocating Saw Blades – Special Purpose • 2 per pack

79013273

Reciprocating Saw Blades – Wood • 2 per pack

79011612

92270128

Product Code

Description

Length

Part Number

240mm

79011596

150mm

92228130

Top For Wood S1531L – Coarse Wood, Green Wood Pruning (<190mm), Fire Wood, Fast Cuts S644D – Construction Wood, Wooden Wall, 2.608.650.614 Plywood, Plastic (<100mm), Boards: Chipboard, MDF (6 – 60mm), Especially for Plunge Cuts Basic For Wood S617K – Coarse Wood, Free of Nails, Pruning Green Wood 2.608.650.616 (<100mm), Especially for Curve Cuts/Plunge Cuts, 2 Pack S1111K – Coarse Wood, Free of Nails 2.608.650.617 (<175mm), Firewood (Dia. <175mm) S1542K – Fire Wood & Damp Wood 2.608.650.681 (Dia. <190mm), Fast Cuts 2.608.650.613

79011605 Product Code

150mm

92270128

225mm

88893016

240mm

92270202

Reciprocating Saw Blades – Wood & Metal • 2 per pack

79011604

Description

S922EF – Thin Sheet Metals (1.5 – 4mm), Pipes/Profiles (<100mm) S922BF – Sheet Metal (<8mm), Pipes/Profiles 2.608.656.037 (<100mm), Fast Cuts, Shatterproof S1122EF – Sheet Metal (<4mm), Pipes/Profiles 2.608.656.042 (<175mm), Flush Cuts, Shatterproof S1122BF – Sheet Metal (<8mm), Pipes/Profiles 2.608.656.041 (<175mm), Flush Cuts, Shatterproof Flexible For Wood, Metal & Plastics S922HF – Wood With Nails (<100mm), Sheet 2.608.656.039 Metal, Pipes/Profiles (<12mm), Shatterproof S1122HF – Pallet Repair, Wood with Nails/ 2.608.656.021 Metal (<175mm), Sheet Metals, Pipes, Aluminium Profiles (3 – 12mm), Flexible Flush Cut S1122VF – Wood With Nails/Metal & Glass Fibre 2.608.654.981 Reinforced Plastic/Epoxy (<175mm), Sheet Metals, Aluminium Profiles (3 – 10mm), Flexible Flush Cut Basic For Metal 2.608.656.038

Part Number

150mm

88850801

150mm

79013273

225mm

79011613

225mm

92270314

150mm

79011612

225mm

79011611

225mm

79011607

2.608.651.944

S918A – Sheet Metal (<3mm), Pipes/Profiles (<100mm)

150mm

92270336

2.608.651.821

S918B – Sheet Metal (<8mm), Pipes/Profiles (<100mm)

150mm

79011601

225mm

92270390

200mm

79011618

150mm

92270392

150mm

79011605

225mm

92270397

Heavy For Metal S1126CHF – Sheet Metal, Pipes/Profiles, Fast & Precision Cuts, Heavy Duty, Shatterproof S1025VF – Medium To Thick Sheet Metals (3–12mm), 2.608.656.265 Solid Pipes/Profiles (10–150mm Dia.), Effortless, Fine Cut Endurance For Heavy Metal S93 BEF – Sheet Metal (<8mm), Pipes/Profiles (<100mm), 2.608.657.523 Fine & Precision Cuts, Heavy Duty, Shatterproof Heavy For Metal – Rescue & Demolition S920CF – Sheet Metal, Solid Pipes/ 2.608.654.820 Profiles, Coarse Cuts, Shatterproof S1130CF – Sheet Metal, Solid Pipes/Profiles, 2.608.657.528 Powerful Coarse Cuts, Shatterproof 2.608.657.398

Product Code

Length

Flexible For Metal

Description

Heavy For Wood & Metal S1222VF – Wood With Nails, Plastic Profiles (<250mm), 2.608.656.043 Pipes/Profiles (<10mm), Flexible, Flush Cuts, Shatterproof S1411DF – Wood With Nails (<250mm), Glass 2.608.654.834 Fibre Reinforced Plastics, Aerated Concrete, Fast Cuts, Heavy Duty, Shatterproof Progressor For Wood & Metal S3456XF – Wood With Nails, Plastics (<150mm), 2.608.654.405 Aluminium Sheets & Profiles (<18mm), Shatterproof

Length

Part Number

225mm

79011614

300mm

79011606

200mm

79011604

1800 999 024 | atom.com.au | getit@atom.com.au

237


Carbide Burrs

4

WHAT ARE Carbide Burrs? Don’t get these confused with the sound you make when you’re cold. Carbide burrs are a versatile grinding tool that effectively let you replace hand files all together. Many different types exist, and all with their own special purpose. To make it easy, we have listed some options below. Ball A ball head is used for cutting concave shapes into the material or to hollow out a larger area. Different sizes allow for sharper detail in carving projects.

Cylinder – End Cut End cut cylinders are similar to the plain end style except the end piece features a flat cutting edge. The cut head allows for contour finishing at squared angles.

Tree Tree heads are mostly used for rounding off edges to make them smoother or to make concave cuts. The extended tip allows you to reach some of the more difficult areas.

Cylinder – Rounded End The rounded end cylinder features a dome head which allows for finishing at a range of different angles.

Cone Cone heads come in two forms; pointed head or round nose. Both of these are designed for surface finishing, particularly in difficult to reach areas.

Oval Oval burrs operate much in the same way as the ball head and is ideal for concave cutting and finishing. The extended head allows it reach some difficult areas that the ball head can’t.

Cylinder – Plain End Plain end cylinder heads feature a flat, cut-off end and are mostly designed for finishing. Due to the flat end, they are also suitable for right angled corners.

Flame Flame heads allow for open concave cutting and finishing. They operate in a very similar way to oval burrs but with a longer and smoother head.

Carbide Cuts Much like hand files, carbide burrs are available in a variety of different cut styles. The most common include single cut, double cut and alumna cut. Single Cut burrs are cut with single right handed flutes called up cuts. These are best suited for heavy stock removal on harder materials.

Alumna Cut burrs are cut with single right handed flutes with wide spacing between each edge. These are used for soft materials with high stock removal and easy chip flow.

Double Cut burrs are cut in a cross formation giving the head more cutting edges. This allows for much quicker stock removal with a smoother finish. This style is best suited for softer materials.

TIP: Do not use your burrs in an electric drill. Instead, use them in a die grinder which will spin the burr at the optimal speed. Spin them too slow and you will chip the teeth.

Tungsten Carbide Burrs – Single Cut • Designed for machining materials of virtually any strength • Reduces tool drive wear • Provides smooth operation action • Prevents chatter marks • Increases stock removal

Cylindrical Radius End SS

238

Cylindrical Radius End

Tree Radius End SS

Tree Radius End

Radius Edge Cut

30º Champfer Edge Cut

45º Champfer Edge Cut

Product Code

Description

Head Dia. x Length

Overall Length

Shank

Max. Speed

Suits Material

Part Number

21724467 21724468 21724727 21724728 26006362 21152936 21115366 21115466

Cylindrical Radius End Stainless Steel Cut Cylindrical Radius End Steel Cut Tree Radius End Stainless Steel Cut Tree Radius End Steel Cut V1610 CR 2.5mm Radius Edge Cut V1612 CR 3.0mm Radius Edge Cut V1605 30º Champfer Edge Cut V1603 45º Champfer Edge Cut

12.7 x 25.4mm 12.7 x 25.4mm 12.7 x 25.4mm 12.7 x 25.4mm 16.0 x 10.0mm 16.0 x 12.0mm 16.0 x 5.0mm 16.0 x 3.0mm

65mm 65mm 65mm 65mm 52mm 52mm 54mm 52mm

6.35mm 6.35mm 6.35mm 6.35mm 6.00mm 6.00mm 6.00mm 6.00mm

20,000rpm 16,000rpm 20,000rpm 16,000rpm 22,000rpm 22,000rpm 22,000rpm 22,000rpm

Stainless Steel (INOX) Steel Stainless Steel (INOX) Steel All Metals All Metals All Metals All Metals

198431 30004560 30004563 30004561 179733 214364 214365 195043

The little things, but not every thing. No matter what your thing, get it @ ATOM


Carbide Burrs

4

Tungsten Carbide Burrs – Double Cut • • • • •

Double cut Offers rapid stock removal in harder materials Engineered for heavy duty applications More durable due to the depth of the teeth Profile of the teeth are less prone to filling up with chips • 1⁄4” shank • RPM is for use in determining maximum recommended speeds for malleable iron, steel welds, cast iron, tool steels, die steels, bronze, brass and aluminium. If using stainless steel the RPM will be higher Product Code

Cylindrical Plain End

Cylindrical Radius End

Tree Pointed End

Description

Head Dia. x Length

Overall Length

Max. Speed

Part Number

32.544

Plain End

3

⁄16” x 5⁄8”

2”

25,000rpm

32.547

Plain End

1

⁄4” x ⁄8”

2”

32.553

Plain End

3

⁄8” x 3⁄4”

32.556

Plain End

1

32.559

Plain End

5

32.613

Radius End

1

32.616

Radius End

5

32.619

Radius End

3

32.61903

Radius End

3

32.703

Radius End

1

32.706

Radius End

3

32.709

Radius End

1

32.712

Radius End

5

32.640

Ball

1

32.644

Ball

5

32.646

Ball

3

32.676

Flame

5

32.679

Flame

1

32.661

Oval

1

32.664

Oval

3

32.742

Pointed End

1

32.748

Pointed End

3

32.751

Pointed End

1

Ball

Tree Radius End

Flame

Oval

Cone Pointed End

Product Code

Description

Head Dia. x Length

Overall Length

5501001

32.622

Radius End

1

⁄2” x 1”

33,000rpm

5501002

32.625

Radius End

5

21⁄2”

27,000rpm

5501005

32.580

End Cut

1

⁄2” x 1”

23⁄4”

24,000rpm

5501007

32.583

End Cut

5

⁄8” x 1”

23⁄4”

15,000rpm

5501008

32.586

End Cut

3

⁄4” x 5⁄8”

2”

33,000rpm

5501021

32.58603

End Cut

3

⁄16” x 3⁄4”

21⁄2”

20,000rpm

5501022

32.589

End Cut

1

⁄8” x 3⁄4”

21⁄2”

27,000rpm

5501023

32.592

End Cut

⁄8” x 1”

23⁄4”

18,000rpm

5501024

Cone Radius End

Max. Speed

Part Number

23⁄4”

24,000rpm

5501025

⁄8” x 1”

23⁄4”

15,000rpm

5501026

⁄4” x 5⁄8”

2”

22,000rpm

5501010

⁄16” x 3⁄4”

21⁄2”

20,000rpm

5501011

⁄8” x 3⁄4”

21⁄2”

18,000rpm

5501013

⁄8” x 1”

23⁄4”

18,000rpm

5501014

⁄2” x 1”

23⁄4”

24,000rpm

5501015

5

⁄8” x 1”

23⁄4”

15,000rpm

5501016

⁄4” x 5⁄8”

2”

22,000rpm

5502016

⁄8” x 3⁄4”

21⁄2”

18,000rpm

5502017

⁄2” x 1”

23⁄4”

16,000rpm

5502018

⁄8” x 1”

23⁄4”

15,000rpm

5502020

Cylindrical 5

Tree ⁄4” x 5⁄8”

2”

33,000rpm

5502011

32.685

Pointed End

1

⁄8” x 3⁄4”

21⁄2”

27,000rpm

5502013

32.688

Pointed End

3

⁄2” x 1”

23⁄4”

24,000rpm

5502014

32.694

Pointed End

1

⁄8” x 1”

23⁄4”

15,000rpm

5502015

32.697

Pointed End

5

Ball ⁄4” x 7⁄32”

2”

33,000rpm

5502002

32.649

Ball

1

⁄16” x 5⁄16”

21⁄16”

20,000rpm

5502003

32.652

Ball

5

⁄2” x 7⁄16”

23⁄16”

24,000rpm

5502005

⁄8” x 9⁄16”

25⁄16”

15,000rpm

⁄8” x 5⁄16”

21⁄16”

27,000rpm

5502004

32.655

Ball

3

5502006

⁄4” x 11⁄16”

27⁄16”

14,000rpm

5502007

⁄16” x 3⁄4”

21⁄2”

30,000rpm

5501017

32.67903

Flame

⁄2” x 11⁄4”

3”

24,000rpm

5501018

5

⁄8” x 17⁄16”

33⁄16”

23,000rpm

5501019

⁄2” x 7⁄8”

25⁄8”

24,000rpm

5503004

⁄8” x 1”

23⁄4”

23,000rpm

5503005

Flame –

Oval ⁄4” x 3⁄8”

2”

22,000rpm

5503001

32.667

Oval

1

⁄8” x 19⁄32”

211⁄32”

27,000rpm

5503003

32.670

Oval

5

Cone ⁄4” x 3⁄4”

2”

22,000rpm

5502008

32.727

Radius End

3

⁄8” x 11⁄16”

213⁄16”

27,000rpm

5502021

⁄8” x 3⁄4”

21⁄2”

18,000rpm

5502009

32.730

Radius End

1

⁄2” x 11⁄8”

27⁄8”

24,000rpm

5502023

⁄2” x 1”

23⁄4”

16,000rpm

5502010

Carbide Burrs – Alumna Cut • For use on aluminium, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood • Provides easy chip flow and faster stock removal with little or no clogging • RPM is for use in determining maximum recommended speeds for malleable iron, steel welds, cast iron, tool steels, die steels, bronze, brass and aluminium. If using stainless steel the RPM will be higher • 1⁄4” shank Product Code

Cylindrical Plain End

Description

Head Dia. x Length

Overall Length

Max. Speed

Part Number

32.95011

Plain End

3

⁄8” x 3⁄4”

21⁄2”

18,000rpm

32.95017

Plain End

1

⁄2” x 1”

3

2 ⁄4”

32.95020

Plain End

5

⁄8” x 1”

32.95711

Radius End

3

32.95717

Radius End

1

32.95811

Radius End

3

32.95814

Radius End

1

32.95817

Radius End

5

Tree Radius End

Cylindrical Radius End

Cone Radius End

Product Code

Description

Head Dia. x Length

Overall Length

Max. Speed

Part Number

5503011

32.95111

Radius End

3

⁄8” x 3⁄4”

16,000rpm

5503012

32.95117

Radius End

1

21⁄2”

18,000rpm

5503013

⁄2” x 1”

23⁄4”

16,000rpm

23⁄4”

15,000rpm

93068011

32.95120

Radius End

5

5503014

⁄8” x 1”

23⁄4”

15,000rpm

93068012

⁄8” x 3⁄4”

21⁄2”

18,000rpm

93068019

32.95720

Radius End

5

⁄2” x 1”

2 ⁄4”

16,000rpm

5503016

32.95744

Radius End

3

⁄8” x 1”

23⁄4”

15,000rpm

93068020

⁄4” x 1 ⁄4”

3”

14,000rpm

93068021

⁄8” x 11⁄16”

213⁄16”

18,000rpm

93068022

32.95820

Radius End

5

⁄2” x 11⁄8”

27⁄8”

16,000rpm

5503017

32.95823

Radius End

3

⁄8” x 15⁄16”

31⁄16”

15,000rpm

93068024

⁄4” x 11⁄2”

31⁄4”

14,000rpm

⁄8” x 13⁄16”

215⁄16”

15,000rpm

93068023

93068025

Cylindrical

Tree 3

1

Cone

1800 999 024 | atom.com.au | getit@atom.com.au

239


Carbide Burr Sets & Mounted Points

4

Carbide Burr Set – 5 Piece, Double Cut

Mounted Points

32.950

• For high stock removal • Recommended speed of 30m/s • Available with 6mm or 1⁄4” shank Abrasive Guide • ADW Abrasive – Aluminium oxide mixture AD + AW • AR Abrasive – Aluminium oxide, Pink • AWCO Abrasive – Aluminium mixture AW + CO Hardness Guide • L – Surface use on stainless, general use on non-ferrous metal and bronze • O – Use on edges and for deburring steel components • J – Surface work on titanium, nickel/cobalt based alloys, hardened steel and built up weld deposits • M – Universal, suits steel and cast steel

• Double cut burrs • High quality carbide • RPM is for use in determining maximum recommended speeds for malleable iron, steel welds, cast iron, tool steels, die steels, bronze, brass and aluminium. If using stainless steel the RPM will be higher • 1 ⁄4” shank Includes: • SB3 – 3⁄8” x 3⁄4” • SC3 – 3⁄8” x 3⁄4” • SC5 – 1⁄2” x 1” • SF3 – 3⁄8” x 3⁄4” • SF5 – 1⁄2” x 1” 5501101

Carbide Burr Sets – 8 Piece, Double & Bear Cut • Choice of double cut for standard cutting, or bear cut for heavy duty applications • Provides greater tool control and produces a finer finish • Designed for rapid stock removal • Suitable for heavy duty applications • Reduces the size and amount of chipping • RPM is for use in determining maximum recommended speeds for malleable iron, steel welds, cast iron, tool steels, die steels, bronze, brass and aluminium. If using stainless steel the RPM will be higher • Comes in sturdy wooden box • 1⁄4” shank Includes: • 1⁄2” cylindrical burr, plain end • 1⁄4” cylindrical burr, radius end • 3⁄8” cylindrical burr, radius end • 3⁄8” ball burr • 1⁄2” oval burr • 1⁄4” tree burr, pointed end • 1⁄2” tree burr, radius end • 1⁄2” deburring 90°

ZY Product Code

Product Code

Description

Part Number

32.925 32.931SY

Double Cut Set Bear Cut Set

93060032 93060033

Tungsten Carbide Burr Sets – Double Cut

KE

A1

Shape

Size

A11

6mm Shank – Resinoid Bond 31127743 ZY 16 x 32mm 31131746 ZY 20 x 25mm 31133743 ZY 20 x 40mm 31134743 ZY 25 x 25mm 31330742 ZY 40 x 20mm 31332742 ZY 50 x 25mm 31408253 WR 25 x 32mm 32205743 KE 20 x 20mm 35501746 A1 19 x 64mm 35511746 A11 22 x 50mm 39101427 A24 6 x 19mm 1 ⁄4” Shank (6.3mm) – Vitrified Bond 35001273 A1 19 x 64mm 35003273 A3 25 x 70mm 35011273 A11 22 x 50mm 35021273 A21 25 x 25mm 35026281 A26 16 x 16mm 35480281 W220 25 x 25mm 39100968 W237 40 x 25mm 39101318 W242 50 x 25mm

A24

A3

A11

A21

A26

Grit

Hardness

Part Number

ADW ADW ADW ADW ADW ADW ADW ADW ADW ADW ADW

30 60 30 30 24 24 30 30 60 60 60

L L L L L L L L L L L

60019795 60019796 60019797 60019798 60019799 60019800 60019801 60019802 60019803 60019804 60019805

AR AR AR AR AWCO AWCO AR ADW

30 30 30 30 46 46 30 46

O O O O J J O M

718001 718003 718007 718012 718017 718025 719024 720003

Mounted points combine the shape and style of carbide burrs with the abrasive properties of a grinding disc. Abrasive Material The biggest point of difference with mounted points is the abrasive material on the tip. Unlike carbide burrs which feature metal cuts, mounted points use these abrasives much like grinding discs for stock removal. Due to the shape and size of these tips, they are most suited for stock removal in hard to reach places in which a grinding disc would not fit. Detailing

Product Code

Description

Part Number

26005693 26005694

5 Piece Tungsten Carbide Burr Kit – 1⁄4” Shank 10 Piece Tungsten Carbide Burr Kit – 1⁄4” Shank

93068063 93068064

W

Abrasive

IDENTIFYING Mounted Points

• Designed for machining materials of virtually any strength • Reduces tool drive wear • Provides smooth operation action • Prevents chatter marks • Increases stock removal 5 Piece Kit Includes: • Cylindrical burr • 2 x cylindrical burrs, radius end • Tree radius burr • Pointed tree burr 10 Piece Kit Includes: • Cylindrical burr • 3 x cylindrical burrs, radius end • Ball shape burr • Oval shape burr • 2 x tree radius burrs • Pointed tree burr

240

WR

Different shaping styles allow for these points to be used for detailing on small and delicate jobs. The tip shape, which mimics those of the carbide burrs, each have their own unique purpose allowing for specialist stock removal.

The little things, but not every thing. No matter what your thing, get it @ ATOM


Grinding Discs – Flat & Depressed Centre GRINDING DISCS – DEPRESSED CENTRE, MULTI-USE

4

Grinding Discs – Depressed Centre, Rust Free • Achieves high stock removal rates with low contact pressure • Manufactured without addition of ferrous, sulphurous and chlorinated fillers (will not cause rust) • Suitable for surface grinding, weld seams, chamfering, deburring and fillet weld grinding Specifications: • A: Aluminium oxide • G: 30 • H: Soft • SF: Steel & stainless steel

• Fast removal of material with long life • Complies with Australian Standard AS1788.1-1987 and EN12413 Specifications: • A: Aluminium oxide • G: 24 • H: Medium • SF: Steel, stainless steel & aluminium

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

A24 QBF42 A24 QBF42 A24 QBF42

100 x 6.0 x 16mm 125 x 6.8 x 22mm 180 x 6.8 x 22mm

15,300rpm 12,200rpm 8,500rpm

65014020 65014060 65014080

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

62010620 62011631 62012631 62017631 62023631

E100-6A 30 NPSF-INOX E115-7A 30 MPSF-INOX E125-7A 30 MPSF-INOX E178-7A 30 MPSF-INOX E230-7A 30 MPSF-INOX

100 x 6 x 16mm 115 x 7 x 22mm 125 x 7 x 22mm 178 x 7 x 22mm 230 x 7 x 22mm

15,300rpm 13,300rpm 12,200rpm 8,600rpm 6,600rpm

92648027 919001 926001 905001 933001

Grinding Discs – Depressed Centre, High Performance

Grinding Discs – Flat, Flexible • Aggressive grinding performance and long tool life • Achieves outstanding stock removal rates • Use with Pferd backing pads Specifications: • A: Aluminium oxide/silicon carbide • G: 36, 46 & 60 • H: Flexible • SF: Steel & stainless steel

• For high performance notching and pipeline applications • Suitable for maintenance demands Specifications: • A: Aluminium oxide • G: 24 & 30 • H: Hard • SF: Steel & stainless steel

Product Code

Grit

Dia. x Thick x Bore

Max. Speed

Part Number

62051036 62051046 62051060 62051136 62051146 62051160 62051236 62051246 62051260 62051836 62051846 62051860

36 46 60 36 46 60 36 46 60 36 46 60

100 x 3 x 16mm 100 x 3 x 16mm 100 x 3 x 16mm 115 x 3 x 22mm 115 x 3 x 22mm 115 x 3 x 22mm 125 x 3 x 22mm 125 x 3 x 22mm 125 x 3 x 22mm 180 x 3 x 22mm 180 x 3 x 22mm 180 x 3 x 22mm

15,200rpm 15,200rpm 15,200rpm 13,300rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm 12,200rpm 8,600rpm 8,600rpm 8,600rpm

92640006 34720002 92640008 92640009 92640010 92640011 60010612 60010613 92640014 92640015 92640016 92640069

Grinding Discs – Flat, Flexible • • • •

AC series used for light weld grinding and polishing Excellent for low pressure applications Finishing most metals A special back up pad is included in each standard pack • Only use with support pad Specifications: • A: Aluminium oxide • G: 36, 46 & 60 • H: Flexible • SF: Metal

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

69900064 69900066

42 A 30 S BF 80 42 A 24 S BF 80

125 x 3.2 x 22mm 178 x 3.2 x 22mm

12,200rpm 8,600rpm

88840162 92608080

Grinding Discs – Depressed Centre • For grinding stainless steel and very hard ferrous materials • Free of iron Specifications: • A: Aluminium oxide • G: 24 & 30 • H: Medium, hard • SF: Steel & stainless steel Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841739 66252841742 66252841744 66252841745 66252841748 66252841751

A30S-BF27 I/F A30S-BF27 I/F A24/30T-BF27 I/F A24/30T-BF27 I/F A24/30T-BF27 I/F A24/30T-BF27 I/F

100 x 6.0 x 16mm 115 x 6.0 x 22mm 125 x 6.8 x 22mm 150 x 6.8 x 22mm 180 x 6.8 x 22mm 230 x 6.8 x 22mm

15,300rpm 13,300rpm 12,250rpm 10,200rpm 8,500rpm 6,650rpm

92610018 92618030 92640019 92618031 92640000 92640020

Grinding Discs – Depressed Centre

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841790 66252841791 66252841792 66252841801 66252841804

AC36 AC46 AC60 WA46 SAC60

125 x 3 x 22mm 125 x 3 x 22mm 125 x 3 x 22mm 125 x 3 x 22mm 125 x 3 x 22mm

12,000rpm 12,000rpm 12,000rpm 12,000rpm 12,000rpm

92618074 92618075 92618076 92618036 92618197

There are hundreds of different grinding discs available in the market. These are the most commonly sourced. If you need something special, ask us @ ATOM

• Achieves high stock removal rates with low contact pressure • Aggressive grinding and long wheel life • Suitable for surface grinding, weld seams, chamfering, deburring and fillet weld grinding Specifications: • A: Aluminium oxide • G: 30 • H: Medium-hard • SF: Steel & cast iron Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

62010634 62011634 62012634 62017634 62023634

E100-6A 30 PPS Forte E115-7A 30 PPS Forte E125-7A 30 PPS Forte E178-7A 30 PPS Forte E230-7A 30 PPS Forte

100 x 6 x 16mm 115 x 7 x 22mm 125 x 7 x 22mm 178 x 7 x 22mm 230 x 7 x 22mm

15,300rpm 13,300rpm 12,200rpm 8,600rpm 6,600rpm

913001 92640025 92640026 92640042 92640040

1800 999 024 | atom.com.au | getit@atom.com.au

241


Grinding Discs, Wheels & Fibre Backed Discs

4

Grinding Discs – Depressed Centre

FIBRE DISC Breakdown

• For ferrous metal welds, structural steel Specifications: • A: Aluminium oxide • G: 24 & 30 • H: Soft, medium, hard • SF: Steel & cast iron

Product Code

Specification

Dia. x Thick x Bore

Max. Speed

Part Number

66252841705 66252841709 66252841681 66252841682 66252841689 66252841695 66252841699 66252841710

A30S-BF27 A30S-BF27 A24/30T-BF27 A24/30T-BF27 A24/30T-BF27 A24/30T-BF27 A24/30P-BF27 A24Q-BF27

100 x 6.0 x 16mm 115 x 6.0 x 22mm 125 x 4.5 x 22mm 125 x 6.8 x 22mm 180 x 6.8 x 22mm 230 x 6.8 x 22mm 230 x 6.8 x 22mm 230 x 6.8 x 22mm

15,300rpm 13,300rpm 12,250rpm 12,250rpm 8,500rpm 6,650rpm 6,650rpm 6,650rpm

92610017 88838099 92618005 8883801 88895355 92640023 92618011 92618012

Fibre backed discs are circular discs made of fibre with one resin and abrasive coated side. These discs are made for grinding on a variety of different materials. All fibre backed discs require a backing pad (page 255) to operate, so be sure to see what fits before you buy.

Much like other abrasives, different coating materials are best suited for different jobs. Let’s recap how each abrasive performs. Aluminium Oxide is best suited for grinding carbon steel, alloy steel, high speed steel, annealed malleable iron, wrought iron and bronzes. Ceramic Oxide fractures at a controlled rate at the sub-micron level and is best suited for demanding applications on steel and alloys.

Sparks flying?

Zirconia Alumina is tough and durable, best suited for a broad range of steels and steel alloys. Quick Mounting Some fibre discs feature mounting points which allow for much faster disc changes, allowing improved productivity in grinding applications. These discs however are not universal and will only be able to be mounted on the accompanying backing pad, so be sure to check manufacturer specifications before using them.

Flame Resistant

Get protected with flame resistant clothing on page 142 Grinding Wheels – Bench Type

Aluminium Oxide – Black: • Manufactured out of tough regular aluminium oxide (AN) • Suitable for: steel, stainless steel (INOX), cast iron Aluminium Oxide – White: • Manufactured out of easy-to-break‑down white aluminium oxide (AW) • Suitable for: alloyed steel, tool steel, high-speed steel (HSS) Silicon Carbide – Green: • Manufactured out of sharp‑edged silicon carbide • Suitable for: tungsten carbide, high-alloy steel

Product Code

Specification

Fibre Backed Discs – Aluminium Oxide

Dia. x Thickness

Grit

Part Number

150 x 20mm 150 x 20mm 150 x 20mm 200 x 25mm 200 x 25mm 200 x 25mm

24 36 60 24 36 60

36004056 269791 36004057 36004059 36004068 36004060

Aluminium Oxide – Black 39008422 39009708 39008423 39008440 39009711 39008441

AN 24 UNIVERSAL AN 36 UNIVERSAL AN 60 UNIVERSAL AN 24 UNIVERSAL AN 36 UNIVERSAL AN 60 UNIVERSAL

Aluminium Oxide – White 39008424 39009699 39008442 39009702

AW 60 HSS AW 80 HSS AW 60 HSS AW 80 HSS

150 x 20mm 150 x 20mm 200 x 25mm 200 x 25mm

60 80 60 80

36004061 36004066 36004062 36004067

150 x 20mm 150 x 20mm 150 x 20mm 200 x 25mm 200 x 25mm

60 80 120 80 120

36004065 36004069 36004058 36004064 36004063

Silicon Carbide – Green 39008570 39009724 39008425 39008490 39008443

242

CN 60 CARBIDE CN 80 CARBIDE CN 120 CARBIDE CN 80 CARBIDE CN 120 CARBIDE

• Abrasive fibre disc for working on steel and non-ferrous metals • For general purpose grinding work • Long tool life • Uniform grinding pattern • Very high stock removal • High flexibility Specifications: • A: Aluminium oxide • G: 24 – 80 • SF: General purpose

Unslotted Product Code Grit 24 36 60 80 Grit 16 24 36 60 80

Part Number

100 x 16mm (Unslotted), 15,300rpm 69401016 915002 69401015 915003 69401023 915005 69401024 915006 125 x 22mm (Slotted), 12,200rpm 64101125 916005 64102125 916006 64103125 916007 64106125 916009 64108125 916010

The little things, but not every thing. No matter what your thing, get it @ ATOM

Slotted Product Code

Part Number

115 x 22mm (Slotted), 13,300rpm 64102111 915007 64103111 915008 64106111 915010 64108111 915011 180 x 22mm (Slotted), 8,500rpm – – – – – – 69401001 908005 69401006 908006


Fibre Backed Discs Fibre Backed Discs – Steel & Ceramic • Fibre discs to suit Combiclick® Backing Pads (92278411, 60021255 & 92648065) • Save time with the quick mounting system • Less heat and less noise • Fast and high stock removal rates

Fibre Backed Discs – Ceramic

Specifications: • A: Steel & ceramic • G: 60 & 80 • SF: Grinding & sanding

Steel

4

Ceramic Plus • High stock removal on hard materials which do not conduct heat well • Micro-crystals enable a much more subtle breaking down of the grain and produces much sharper edges Specifications: • A – Ceramic oxide • G – 20 & 24 • SF – Hard materials

Ceramic

Product Code

Diameter x Bore

Grit

Max. Speed

Part Number

75470924 75470925

125 x 22mm 125 x 22mm

20 24

12,200rpm 12,200rpm

279513 30006658

Fibre Backed Discs – Zirconia

Product Code

Material

Diameter

Grit

Max. Speed

Part Number

64183115 64183125 64193106 64193108

Steel Steel Ceramic Ceramic

115mm 125mm 125mm 125mm

– – 60 80

13,300rpm 12,200rpm 12,200rpm 12,200rpm

92748174 92748161 94740156 109918

Fibre Backed Discs – Ceramic

• For coarse grinding work with high stock removal and long tool life • Best results on high-power angle grinders at increased contact pressure Specifications: • A – Zirconia • G – 24 – 120 • SF – Steel & stainless steel

Cubitron™ II 982C • Made with revolutionary 3M™ precision‑shaped ceramic grain technology • Suitable for prep work, beveling or weld grinding Specifications: • A: Ceramic • G: 36, 60 & 80 • SF: Mild steel

Product Code Grit 36 60 80 Grit 36 60 80

Unslotted Product Code Grit

Part Number

100 x 16mm (Unslotted)

Product Code

Part Number

115 x 22mm (Slotted)

60440230021 60015332 60440230039 60015333 60440230047 60021230 125 x 22mm (Slotted) 60440229270 60015337 60440229361 60021231 60440229403 60021232

60440229288 60015334 60440229353 60015335 60440229395 60015336 180 x 22mm (Unslotted) 60440227027 60015338 60440229379 60015339 60440229411 60021233

Part Number

100 x 16mm (Unslotted) 69400014 79912542 69400016 79912543 69400017 92748110 69400018 79912544 69400015 92748111 125 x 22mm (Slotted) 64202125 36004115 64203125 916107 64206125 916109 64208125 916110 64212125 916111

24 36 60 80 120 Grit 24 36 60 80 120

Fibre Backed Discs – Ceramic

Fibre Backed Discs – Ceramic

Ceramic Cool

Cubitron™ II 987C

• High stock removal on hard materials which do not conduct heat well • Active grinding additives in the coating significantly improve stock removal and prevent clogging Specifications: • A – Ceramic oxide • G – 36 – 120 • SF – Hard materials

• Made with revolutionary 3M™ precision-shaped ceramic grain technology, engineered with ultra-sharp, fast‑cutting points that wear evenly and run cooler Specifications: • A – Ceramic • G – 36, 60 & 80 • SF – Stainless steel

Unslotted Product Code Grit 36 60 80 120 Grit 36 60 80 100 120

Slotted Product Code

Part Number

115 x 22mm (Slotted) 64202111 138610 64203111 915108 64206111 915110 64208111 915111 64212111 36004116 180 x 22mm (Unslotted) 69401147 36004139 69401048 36004137 69401073 36004138 69401149 36004140 69401489 36004141

Slotted

Part Number

100 x 16mm (Unslotted), 15,300rpm 69401553 36004142 69401555 36004143 69401556 224134 69401584 250852 125 x 22mm (Slotted), 12,200rpm 64173125 34710005 64176125 79912539 64178125 79912540 64180125 36004112 64182125 79912538

Product Code

Part Number

115 x 22mm (Slotted), 13,300rpm 64173111 36004108 64176111 36004110 64178111 36004111 64182111 36004113 180 x 22mm (Slotted), 8,500rpm 64173175 36004109 64176175 227859 64178175 227860 – – 64182175 36004114

Product Code

Diameter Grit

Part Number

Product Code

Diameter Grit

Part Number

60440230054 60440230062 60440230070 60440229312 60440229577 60440229619

100mm 100mm 100mm 115mm 115mm 115mm

36003073 36003074 36003075 36003076 36003077 36003078

60440229304 60440229585 60440229627 60440229296 60440229593 60440229635

125mm 125mm 125mm 180mm 180mm 180mm

133351 79900064 154766 130305 236076 200676

36 60 80 36 60 80

1800 999 024 | atom.com.au | getit@atom.com.au

36 60 80 36 60 80

243


Flap Discs – Zirconia

4

FLAP DISCS – ZIRCONIA

Grinding Disc OR Flap Disc? KNOW THE DIFFERENCE When choosing between a grinding disc and a flap disc, it is important to first decide what is most important to you; time, finish or money? Flap Discs, typically made from Zirconia, are generally gentler on surfaces, leaving a much smoother finish. This reduces the time needed to prepare the surface for finish or paint. However, these discs typically come at a higher cost.

• Ideal for general purpose applications such as weld removal, grinding and clean up of steel, stainless steel and aluminium • Zirconia offers fast and efficient removal of material • Complies with AS1788.1-1987 Specifications: • A: Zirconia • G: 40, 60, 80 & 120 • SF: Steel, stainless steel & aluminium

Grinding Discs/Wheels are economical and good for removing material, but do not leave a smooth finish.

Flap Discs – Zirconia Polifan® • For demanding applications • Zirconia is suitable for higher powered angle grinders • Optimum stock removal and long service life Specifications: • A: Zirconia • G: 40, 60, 80 & 120 • SF: Steel & stainless steel Product Code

Specification

Dia. x Bore

Max. Speed

Part Number

67764100 67766100 67768100 67769100 67764115 67766115 67768115 67769115 67764125 67766125 67768125 67769125 67764185 67766185 67768185 67769185

PFC 100 Z 40 PSF PFC 100 Z 60 PSF PFC 100 Z 80 PSF PFC 100 Z 120 PSF PFC 115 Z 40 PSF PFC 115 Z 60 PSF PFC 115 Z 80 PSF PFC 115 Z 120 PSF PFC 125 Z 40 PSF PFC 125 Z 60 PSF PFC 125 Z 80 PSF PFC 125 Z 120 PSF PFC 180 Z 40 PSF PFC 180 Z 60 PSF PFC 180 Z 80 PSF PFC 180 Z 120 PSF

100 x 16mm 100 x 16mm 100 x 16mm 100 x 16mm 115 x 22mm 115 x 22mm 115 x 22mm 115 x 22mm 125 x 22mm 125 x 22mm 125 x 22mm 125 x 22mm 180 x 22mm 180 x 22mm 180 x 22mm 180 x 22mm

15,300rpm 15,300rpm 15,300rpm 15,300rpm 13,300rpm 13,300rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm 12,200rpm 12,200rpm 8,500rpm 8,500rpm 8,500rpm 8,500rpm

81050382 734001 734002 81050383 734003 734004 734005 734006 734007 734008 735001 735002 735005 735006 735007 735008

Flap Discs – Zirconia Polifan® • High performance tool for maximum cost efficiency in demanding grinding jobs Specifications: • A: Zirconia • G: 40, 60 & 80 • SF: Steel & stainless steel

Dia. x Bore

Grit

Max. Speed

Part Number

100 x 16.0mm 100 x 16.0mm 100 x 16.0mm 115 x 22.23mm 115 x 22.23mm 115 x 22.23mm 125 x 22.23mm 125 x 22.23mm 125 x 22.23mm 125 x 22.23mm

40 60 80 40 60 80 40 60 80 120

15,300rpm 15,300rpm 15,300rpm 13,300rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm 12,200rpm 12,200rpm

65575020 65575030 65575040 65575120 65575130 65575140 65575320 65575340 65575341 65575344

Flap Discs – Zirconia, Small Diameter • For coarse grinding work with high stock removal and long tool life • No adhesion, no slipping • Vibration-free operation • Tool is always fixed centrally Specifications: • A: Zirconia • G: 40, 60, 80 & 120 • SF: Metal, steel & stainless steel

Product Code

Specification

Diameter

Grit

Max. Speed

Part Number

47202125 47202126 47202533 47202534 47202101 47202535 47202536 47202092

CDR PFF 50 Z 40 CDR PFF 50 Z 60 CDR PFF 50 Z 80 CDR PFF 50 Z 120 CDR PFF 75 Z 40 CDR PFF 75 Z 60 CDR PFF 75 Z 80 CDR PFF 75 Z 120

50mm 50mm 50mm 50mm 75mm 75mm 75mm 75mm

40 60 80 120 40 60 80 120

14,000rpm 14,000rpm 14,000rpm 14,000rpm 10,000rpm 10,000rpm 10,000rpm 10,000rpm

36004098 36004099 36004100 36004101 36004097 36004102 36004103 36004096

Looking for electric angle grinders?

244

Product Code

Specification

Dia. x Bore

Max. Speed

Part Number

67784115 67786115 67788116 67784125 67786125 67788126 67784185 67786185 67788181

PFC 115 Z 40 SG PFC 115 Z 60 SG PFC 115 Z 80 SG PFC 125 Z 40 SG PFC 125 Z 60 SG PFC 125 Z 80 SG PFC 180 Z 40 SG PFC 180 Z 60 SG PFC 180 Z 80 SG

115 x 22mm 115 x 22mm 115 x 22mm 125 x 22mm 125 x 22mm 125 x 22mm 180 x 22mm 180 x 22mm 180 x 22mm

13,300rpm 13,300rpm 13,300rpm 12,200rpm 12,200rpm 12,200rpm 8,500rpm 8,500rpm 8,500rpm

92650000 92650001 60019757 60019758 60019759 60019760 92658011 60019761 60019762

Get ‘em on page 306

The little things, but not every thing. No matter what your thing, get it @ ATOM


Flap Discs & Wheels – Ceramic Flap Discs – Ceramic

Flap Discs – Ceramic, Small Diameter

• Special flap disc for particularly low heat generation • Aggressive stock removal performance • For demanding grinding work on materials which are very hard to machine • Suitable for surface grinding, work on weld seams, chamfering and deburring Specifications: • A: Ceramic oxide grain • G: 40 & 60 • SF: Steel, nickel-based alloys, titanium alloys & stainless steel

Blaze® Mini

4

• Extra heavy duty plastic backing • Self-lubricating • TR (Type III) fastening system Specifications: • A: Ceramic alumina • G: 40, 60 & 80 • SF: Steel & stainless steel

Product Code

Specification

Dia. x Bore

Grit

Max. Speed

Part Number

67760415 67760425 67760625 67760485

PFC 115 CO 40 SGP-COOL PFC 125 CO 40 SGP-COOL PFC 125 CO 60 SGP-COOL PFC 180 CO 40 SGP-COOL

115 x 22mm 125 x 22mm 125 x 22mm 180 x 22mm

40 40 60 40

13,300rpm 12,200rpm 12,200rpm 8,500rpm

36004133 36004134 36004136 36004135

Product Code

Specification

Diameter

Max. Speed

Part Number

77696090146 77696090147 77696090148 77696090151 77696090152 77696090153

R980 Z40 R980 Z60 R980 Z80 R980 Z40 R980 Z60 R980 Z80

50mm 50mm 50mm 75mm 75mm 75mm

15,500rpm 15,500rpm 15,500rpm 12,000rpm 12,000rpm 12,000rpm

36000726 36000727 36000728 36000729 36000730 36000731

Product Code Dia. x Width

Grit

Max. Speed

Part Number

44508156 44508246 44509046 44509066 44509086 44509126 44509156 44509246 44509326 44510066 44510086 44510126 44510156 44510246 44511046 44511066 44511086 44511126 44511246 44511326 44514046 44514066 44514086 44514126 44514156 44514246 44514326 44516046 44516066 44516086 44516126 44516156 44516246 44516326

150 240 40 60 80 120 150 240 320 60 80 120 150 240 40 60 80 120 240 320 40 60 80 120 150 240 320 40 60 80 120 150 240 320

12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm

726035 726037 726039 726040 727001 727003 727004 727006 727007 727009 727010 727012 727013 727015 727017 727018 727019 727021 727024 727025 727026 727027 727028 727030 727031 727033 727034 727035 728001 728002 728004 728005 728007 728008

Flap Wheels • • • • •

Hard wearing abrasive grain Heavy duty cloth backed flaps High concentricity Long life with good stock removal Good flexibility, adapts well to various workpieces • Low vibration

• Ideal for working on profiled work pieces, inner surfaces, bottlenecks and hard to reach access areas • Especially suited for radial applications • Shank: 6mm

Product Code Dia. x Width

Grit

Max. Speed

Part Number

Product Code Dia. x Width

Grit

Max. Speed

Part Number

44410086 44401066 44401086 44401126 44401246 44402066 44402086 44402126 44402156 44402186 44402246 44402326 44409066 44409086 44409126 44409156 44409186 44409246 44409326 44411126 44411156 44403066 44403086 44403126 44403186 44403246 44404066 44404086 44404126 44404156 44404186 44404246 44404326 –

80 60 80 120 240 60 80 120 150 180 240 320 60 80 120 150 180 240 320 120 150 60 80 120 180 240 60 80 120 150 180 240 320 –

30,500rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 25,400rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm –

92620027 60012308 725001 725003 725005 725007 725008 79912633 725011 725012 725013 725014 725016 725017 725019 725020 725021 725022 725023 131661 92620032 725025 725026 725028 725030 725031 725034 725035 725037 725038 725039 725040 725041 –

44408046 44408066 44408086 44408126 44408156 44408186 44408246 44506066 44506086 44506126 44506156 44506246 44504066 44504086 44504126 44504156 44504186 44504326 44411546 44503066 44503086 44503126 44503156 44503186 44503246 44503326 44507066 44507086 44507126 44507156 44507246 44508066 44508086 44508126

40 60 80 120 150 180 240 60 80 120 150 240 60 80 120 150 180 320 40 60 80 120 150 180 240 320 60 80 120 150 240 60 80 120

19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 15,200rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm

725042 725043 725044 725046 725047 725048 725049 725061 725062 725064 725065 726001 726004 726005 726007 726008 726009 726011 726012 726013 726014 726016 726017 726018 726019 726020 726022 726023 726025 726026 726028 726031 726032 726034

25 x 25mm 30 x 5mm 30 x 5mm 30 x 5mm 30 x 5mm 30 x 10mm 30 x 10mm 30 x 10mm 30 x 10mm 30 x 10mm 30 x 10mm 30 x 10mm 30 x 15mm 30 x 15mm 30 x 15mm 30 x 15mm 30 x 15mm 30 x 15mm 30 x 15mm 30 x 30mm 30 x 30mm 40 x 10mm 40 x 10mm 40 x 10mm 40 x 10mm 40 x 10mm 40 x 15mm 40 x 15mm 40 x 15mm 40 x 15mm 40 x 15mm 40 x 15mm 40 x 15mm –

40 x 20mm 40 x 20mm 40 x 20mm 40 x 20mm 40 x 20mm 40 x 20mm 40 x 20mm 50 x 15mm 50 x 15mm 50 x 15mm 50 x 15mm 50 x 15mm 50 x 20mm 50 x 20mm 50 x 20mm 50 x 20mm 50 x 20mm 50 x 20mm 50 x 30mm 50 x 30mm 50 x 30mm 50 x 30mm 50 x 30mm 50 x 30mm 50 x 30mm 50 x 30mm 60 x 15mm 60 x 15mm 60 x 15mm 60 x 15mm 60 x 15mm 60 x 20mm 60 x 20mm 60 x 20mm

1800 999 024 | atom.com.au | getit@atom.com.au

60 x 20mm 60 x 20mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 40mm 60 x 40mm 60 x 40mm 60 x 40mm 60 x 40mm 60 x 50mm 60 x 50mm 60 x 50mm 60 x 50mm 60 x 50mm 60 x 50mm 80 x 30mm 80 x 30mm 80 x 30mm 80 x 30mm 80 x 30mm 80 x 30mm 80 x 30mm 80 x 50mm 80 x 50mm 80 x 50mm 80 x 50mm 80 x 50mm 80 x 50mm 80 x 50mm

245


Diamond Cup Wheels, Dressing Sticks & Wire Wheel Brushes

4

Diamond Cup Wheels – Single & Double Row

Wire Wheel Brushes – Crimped

• For use with angle grinders • Suitable for grinding and re‑surfacing of concrete, bricks and natural stone • Ideal for the removal of coatings such as paint, epoxy glues and tile adhesive Single Row: • For fast material removal Double Row: • For a smoother finish and longer life

Specifications: • A: Carbon steel • SF: General purpose

Product Code Single Row

Double Row

Diameter

Product Code

Part Number

Product Code

Part Number

100mm 125mm 180mm

70184601161 70184601163 70184601165

36000719 36000721 36000723

70184601162 70184601164 70184601166

36000720 36000722 36000724

Bore

Gauge

Max. Speed

Part Number

Multi-Bore Multi-Bore

30G 28G

6,000rpm 4,600rpm

92638036 92638037

Multi-Bore Multi-Bore

28G 28G

6,000rpm 4,600rpm

92638041 92638042

Diamond Cup Wheels – Swirl

Wire Wheel Brushes – Crimped

• Designed for fast, smooth grinding on concrete, masonry and stone • Also ideal for the removal of concrete floor coatings such as epoxy, paints and glues • Professional quality

• The crimped steel wire construction allows for softer brushing and light paint and rust removal • Suitable for bench and pedestal grinders • Ideal for cleaning threads on bolts, garden tools, clean up of welds and removal of paint and rust Specifications: • A: Steel • SF: General purpose

Product Code

Dimensions

Segments

Part Number

70184624195 70184623037 70184624197

100 x 5.5 x 8 x 22.2/16mm 125 x 5.5 x 8 x 22.2mm 180 x 5.5 x 8 x 22.2mm

18 20 24

92618179 92618159 79014566

Diamond Cup Wheels – Double Row • Clipper diamond grinding cup wheels offer the most effective and safe way to grind, smooth and shape all types of masonry, concrete and stone • Professional quality

Product Code

Dimensions

Part Number

70184610268 70184610270

100 x 5.5 x 8 x 22.2/16mm 180 x 5.5 x 8 x 22.2mm

92618136 92618138

Product Code

Dia. x Thick

Bore

Gauge

Max. Speed

Part Number

00210011242 00210011243 00210011251 00210011252 00210011253 00210011303 00210011304 00210011265 00210011270 00210011271 00210011281 00210011282 00210011283 00210011284 00210011285 00210011286

100 x 19mm 100 x 25mm 125 x 19mm 125 x 28mm 150 x 13mm 150 x 19mm 150 x 28mm 200 x 38mm 200 x 50mm 250 x 19mm 250 x 28mm 250 x 38mm 250 x 50mm 300 x 25mm 300 x 38mm 300 x 50mm

Multi-Bore Multi-Bore Multi-Bore Multi-Bore Multi-Bore Multi-Bore Multi-Bore Multi-Bore Multi-Bore 25.4mm 25.4mm 25.4mm 25.4mm 31.8mm 31.8mm 31.8mm

30G 30G 30G 30G 28G 28G 28G 28G 28G 28G 28G 28G 28G 28G 28G 28G

6,000rpm 6,000rpm 6,000rpm 6,000rpm 6,000rpm 6,000rpm 6,000rpm 4,600rpm 4,600rpm 3,600rpm 3,600rpm 3,600rpm 3,600rpm 3,000rpm 3,000rpm 3,000rpm

92638001 92638002 92638003 92638004 92638005 731002 92630017 92638007 88838674 731005 731006 92638008 92638009 92638010 88897614 88809911

Wire Wheel Brushes – Crimped, Stainless Steel & Aluminium

Dressing Sticks Silicon Carbides: • Grade: 37C24SVK

92720001

246

Dia. x Thick

Individually Packed On Display Card 00310421352 150 x 20mm 00310421354 200 x 20mm Individually Boxed – Industrial Quality 00310421353 150 x 28mm 00310421355 200 x 28mm

• Premium wheel brushes with crimped stainless steel wire • Suitable for bench grinders and pedestal grinders Specifications: • A: 316 stainless steel • SF: Stainless steel & aluminium

60021175

Product Code

Description

Dimensions

Grit

Part Number

BV208833 BV208841 BV208868 BD182672 BD182699 BD211931

Silicon Carbide Silicon Carbide Silicon Carbide Single Point Diamond Economax Single Point Diamond Economax Single Point Diamond Premium

13 x 13 x 150mm 20 x 20 x 150mm 25 x 25 x 150mm 13 x 13 x 150mm 20 x 20 x 150mm 25 x 25 x 150mm

– – – 0.75 Carat 1.0 Carat 1.0 Carat

92720005 92720000 92720001 60021173 60021174 60021175

Product Code

Dia. x Thick

Bore

Gauge

Max. Speed

Part Number

00210011259

150 x 28mm

Multi-Bore

30G

6,000rpm

88889108

00210011264

200 x 28mm

Multi-Bore

30G

4,600rpm

79015182

The little things, but not every thing. No matter what your thing, get it @ ATOM


Wire Wheel Brushes WIRE WHEEL BRUSHES – TWIST KNOT

WHAT TO USE Twist Knot OR Crimped Wire?

• Heavy burr removal in slotted and narrow confined areas • Weld cleaning on pipelines • Heavy weld scale removal • Rubber and plastic flash removal • Heavy duty cleaning Specifications: • A: Carbon steel & stainless steel • SF: General purpose

In order to choose the right wire brush for the job, you must look at how rough the surface is and how aggressive the action must be to get the job done. Crimped Wire Brushes feature loose hanging wires that allow for a lighter action compared to twist knot cup brushes. These brushes are most suited for light duty cleaning applications.

92638080 Product Code Diameter Bore Carbon Steel 13131 08750 08910-11 09400-11 09000-11 Stainless Steel 37334 09200-11

4

Twist Knot Brushes feature braided metal wires that produce a much more aggressive action compared to crimped wire cup brushes. These brushes are most suited for heavy duty jobs.

92660037

No. of Knots Gauge

Max. Speed

Part Number

100mm 125mm 150mm 150mm 175mm

5 ⁄8” x 11 UNC 22.2mm 22.2mm 22.2mm 22.2mm

32 38 30 56 56

25G 25G 24G 25G 25G

20,000rpm 12,500rpm 12,500rpm 12,500rpm 9,000rpm

92638080 729010 92630028 92630027 92660037

125mm 175mm

22.2mm 22.2mm

38 56

25G 25G

12,500rpm 9,000rpm

717010 92660038

Wire Wheel Brushes – Crimped • Flexible for light to medium duty surface prep on irregular surfaces • Ideal for cleaning rust, scale and dirt; light deburring, edge blending, roughening for adhesion, finishing for appearance, finish preparation prior to plating or painting and high production applications Specifications: • A: Carbon steel • SF: General purpose

Wire Wheel Brushes – Twist Knot • Cleaning rust, scale and dirt • Deburring and edge blending • Roughening for adhesion • Finishing for appearance • Finish preparation prior to plating or painting • Ideal for high production applications • Number of knots: 24 Specifications: • A: Carbon steel or stainless steel • SF: General purpose Product Code Description

Diameter

Bore

Gauge

Max. Speed

Part Number

13161 08045 08040-11 08100-11 08340-11

100mm 100mm 100mm 150mm 150mm

⁄8” x 11 UNC 16mm 22.2mm 22.2mm 22.2mm

30G 30G 30G 24G 27G

14,000rpm 20,000rpm 20,000rpm 9,000rpm 9,000rpm

736009 729011 729012 730006 717011

Gauge

Max. Speed

Part Number

26G 26G 26G

12,000rpm 12,000rpm 12,000rpm

92638046 92638047 92638052

Carbon Steel Carbon Steel Carbon Steel Carbon Steel Stainless Steel

5

Wire Wheel Brushes – Twist Knot • Industrial quality • Individually boxed • Rows: 1 • Number of knots: 18 – 24 Specifications: • A: Carbon steel & stainless steel • SF: General purpose

Product Code

Description

Dia. x Bore

Gauge

Max. Speed

01155 01238 06110

Narrow Face – 19mm Narrow Face – 19mm Medium Face – 25mm

200 x 16mm 250 x 19mm 200 x 16mm

34G 34G 33G

6,000rpm 4,000rpm 4,500rpm

Part Number 731007 731009 731008

Wire Wheel Brush – Crimped, Brass • Premium wheel brush suitable for most bench grinders and pedestal grinders • Crimped brass wire construction allows for softer, carbon-free brushing and light paint and rust removal Specifications: • A: Brass • SF: General purpose

Product Code

Description

00310421386 00310421387 00310421388

Carbon Steel 100mm Carbon Steel 125mm Stainless Steel 125mm

No. of Knots 16mm 18 22mm 24 22mm 24

Diameter Bore

Wire Wheel Brush – Twist Knot • Industrial quality • Individually boxed Specifications: • A: Stainless steel • SF: General purpose

Product Code

Dia. x Thick

Bore

Gauge

Max. Speed

Part Number

Product Code

Diameter

Bore

No. of Knots

Gauge

Max. Speed

Part Number

00210011269

200 x 19mm

Multi-Bore

32G

6,000rpm

88850860

00310421395

125mm

22mm

30

26G

12,000rpm

90560032

1800 999 024 | atom.com.au | getit@atom.com.au

247


Wire Wheel Brushes

4

Wire Wheel Brushes – Twist Knot

Wire Wheel Brushes – Twist Knot

• For heavy duty brushing work in pipeline, tank and pressure vessel construction • No. of knots: 48 – 76 Specifications: • A: Steel or stainless steel • SF: Heavy duty purposes

• The twist knot carbon steel wire construction allows for hard aggressive brushing and contaminant removal • Ideal for scale rust and paint removal • Use on steel, cast iron and other ferrous materials • Some sizes are also available in stainless steel • No. of knots: 18 – 30 Specifications: • A: Carbon steel • SF: Steel, cast iron & ferrous materials

Product Code Diameter Bore

Gauge

No. Of Knots Wire

Max. Speed

Part Number

43302501 43302502 43302507 43303804 43303805

0.5mm 0.5mm 0.5mm 0.5mm 0.5mm

48 48 48 76 76

11,000rpm 11,000rpm 11,000rpm 9,000rpm 9,000rpm

92668033 92668034 92668041 92668038 92668039

125mm 125mm 125mm 178mm 178mm

22.2 M14 M14 22.2 M14

Steel Steel Stainless Steel Steel Steel

Wire Wheel Brush – Twist Knot • Industrial quality • Individually boxed • No. of knots: 30 Specifications: • A: Carbon steel • SF: Heavy duty purposes

729001

92638011

Product Code

Diameter Bore

Gauge

Rows No. Of Knots Max. Speed

Part Number

00210011605 00210011606 00210011608 00210011609 00210011610 00210011620 00210011618 00210011619

100mm 100mm 100mm 100mm 100mm 200mm 200mm 200mm

30G 30G 30G 26G 26G 30G 26G 26G

1 1 1 1 1 1 1 2

12,000rpm 12,000rpm 12,000rpm 12,000rpm 12,000rpm 6,000rpm 6,000rpm 6,000rpm

729001 729002 729003 729004 729005 92638011 730005 92638012

Wire

Max. Speed

Part Number

Steel Steel Stainless Steel Stainless Steel Steel Stainless Steel Stainless Steel Steel Steel Steel Stainless Steel

12,500rpm 12,500rpm 12,500rpm 12,500rpm 11,000rpm 11,000rpm 11,000rpm 11,000rpm 9,000rpm 9,000rpm 9,000rpm

92668045 92668046 92668052 92668053 92668047 92668054 92668055 92668048 92668050 92668051 92668057

12.7mm 15.9mm 22mm 12.7mm 15.9mm Multi-Bore Multi-Bore Multi-Bore

18 18 18 18 18 30 30 30

Wire Wheel Brushes – Twist Knot • Descaling, rust removal, deburring and weld dressing • No. of knots: 24 – 30 Specifications: • A: Steel or stainless steel • SF: Steel, cast iron & ferrous metals Product Code

Dia. x Think

Bore

Gauge

Max. Speed

Part Number

00310421393

125 x 6mm

22mm

26G

12,000rpm

92638070

Wire Wheel Brush – Twist Knot, Stainless • • • •

For use on angle grinders and straight grinders Heavy duty applications in pipeline or container construction Designed for high mechanical loads Special narrow wire twist knots for work in hard to reach places such as root weld seams • No. of knots: 30 Specifications: • A: 316 stainless steel • SF: Heavy duty purposes

Product Code Diameter

Bore

Gauge

43312001 43312002 43312003 43312004 43303005 43303006 43303007 43303013 43304001 43304009 43304003

22.2mm M14 22.2mm M14 22.2mm 22.2mm M14 22.2mm 22.2mm M14 22.2mm

0.5mm 0.5mm 0.35mm 0.35mm 0.5mm 0.35mm 0.35mm 0.5mm 0.5mm 0.5mm 0.35mm

115mm 115mm 115mm 115mm 125mm 125mm 125mm 125mm 178mm 178mm 178mm

No. Of Knots 24 24 24 24 24 24 24 24 30 30 30

Wire Wheel Brushes – Twist Knot, Bevelled Product Code

Material

Dia. x Thickness

00210011604

316 Stainless Steel 125 x 6mm

Gauge

Max. Speed

Part Number

26G

12,000rpm

92638100

Made a mess? Clean up with brooms on page 680

Magnetic floor sweepers on page 690 248

• Maximum aggression for cleaning in corners • Roughening and deburring • Rust and paint removal • Weld scale, weld splatter and corrosion removal • Surface conditioning • No. of knots: 20 Specifications: • A: Carbon steel & stainless steel • SF: General purpose

No. Of Knots

Gauge

Max. Speed

Part Number

M10 x 1.5mm 5 ⁄8” x 11 UNC, M14 x 2.0mm

20

25G

12,500rpm

92660017

20

25G

12,500rpm

92660035

M14 x 2.0mm M10 x 1.5mm

20 20

29G 29G

12,500rpm 12,500rpm

34760008 34760007

Product Code

Diameter

Bore

Carbon Steel 13422

100mm

13026

115mm

Stainless Steel/Degreased 125mm 13420D 100mm

The little things, but not every thing. No matter what your thing, get it @ ATOM


Wire Wheel & Cup Brushes Wire Wheel Brushes – Twist Knot, Bevelled

Wire Cup Brushes – Twist Knot

• The twist knot steel wire construction allows for hard aggressive brushing and contaminant removal • Use on steel, cast iron and other ferrous materials • Ideal for scale, rust and paint removal • Suitable for angle grinders • Some sizes are also available in stainless steel Specifications: • A: Steel • SF: General purpose

• Heavy duty cleaning of large metal surfaces • Cleaning prior to welding • Weld scale and corrosion removal • Rust and paint removal • Roughening • Deburring Specifications: • A: Carbon & stainless steel • SF: General purpose

Product Code

Diameter

Bore

Gauge

Max. Speed

Part Number

00210011691 00210011581

115mm 150mm

M14 x 2 M14 x 2

26G 26G

12,000rpm 9,000rpm

246032 88890651

Wire Wheel Brushes – Twist Knot, Bevelled • Industrial quality • Individually boxed • Rows: 1 • No. of knots: 20 Specifications: • A: Steel • SF: General purpose

Product Code

Size

Thread

Gauge

No. of Knots Max. Speed

Part Number

70184645990 70184645989

100mm 100mm

M10 x 1.50 M14 x 2.00

26G 26G

20 20

92638075 92638077

12,000rpm 12,000rpm

• Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rubber and plastic flash removal • Rust, paint, scale and slag removal • Carbon cleaning • Weld cleaning • Deburring and spot facing Specifications: • A: Carbon steel • SF: General purpose

Product Code

Diameter

Bore

Gauge

Max. Speed

Part Number

13006 38443

75mm 75mm

⁄8” x 11, M14 x 2.0 M14 x 2.0

30G 30G

14,000rpm 14,000rpm

92638093 724026

Metal filings should never be inhaled. Get particulate respirators from page 37

Carbon Steel 13003 13004 13281 13282 13286 13283 13295 13152 37446 12316 12275 Stainless Steel 13255 13159

Diameter

Bore

Gauge

Max. Speed

Part Number

50mm 70mm 70mm 70mm 70mm 70mm 90mm 90mm 100mm 100mm 125mm

⁄8” x 11, M14 x 2.0 ⁄8” x 11, M14 x 2.0 M10 x 1.25 M10 x 1.5 5 ⁄8” x 11 M14 x 2.0 5 ⁄8” x 11, M14 x 2.0 M14 x 2.0 M14 x 2.0 5 ⁄8” x 11 M14 x 2.0

25G 20G 25G 25G 25G 25G 24G 24G 24G 24G 24G

14,000rpm 14,000rpm 14,000rpm 14,000rpm 14,000rpm 14,000rpm 13,000rpm 13,000rpm 9,000rpm 9,000rpm 7,000rpm

736008 92668106 736007 736010 92660018 736011 736106 736012 724023 92630029 92630030

70mm 90mm

M14 x 2.0 M14 x 2.0

25G 24G

14,000rpm 13,000rpm

92630031 92630034

5 5

Wire Cup Brushes – Twist Knot • Excellent for heavy-duty brushing, mainly on large surfaces, and for deburring, cleaning and rust removal • No. of knots: 18 – 26 Specifications: • A: Steel & stainless steel • SF: General purpose

Wire Cup Brushes – Crimped

5

Product Code

4

Product Code Diameter Bore

Gauge

43305002 43305003 47701479 43305012 43306001 43308001 43308033

0.35mm 0.35mm 0.35mm 0.35mm 0.50mm 0.50mm 0.35mm

65mm 65mm 65mm 65mm 80mm 100mm 100mm

M14 x 2.0 M14 x 2.0 M10 x 1.5 M10 x 1.5 M14 x 2.0 M14 x 2.0 M14 x 2.0

No. Of Knots 18 18 18 18 22 26 24

Max. Speed Steel 12,500rpm Stainless Steel 12,500rpm Steel 12,500rpm Stainless Steel 12,500rpm Steel 10,000rpm Steel 9,000rpm Stainless Steel 9,000rpm Wire

Part Number 92668023 92668029 92668025 92668031 10330001 92668027 92668032

Wire Cup Brush – Twist Knot, Stainless Steel & Aluminium • Allows for hard aggressive brushing and contaminant removal • Suits most 5” angle grinders • Excellent for brushing welds and removing weld discolouration and paint • No. of knots: 18 Specifications: • A: Stainless steel • SF: Stainless steel & aluminium

Product Code

Diameter

Bore

No. Of Knots

Gauge

Max. Speed

Part Number

00210011623

75mm

M14 x 2.0

18

30G

12,000rpm

60017292

1800 999 024 | atom.com.au | getit@atom.com.au

249


Wire End Brushes

4

Wire End Brushes – Crimped, Shaft-Mounted

Wire End Brushes – Crimped, Spindle-Mounted

• Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rubber and plastic flash removal • Rust, paint, scale and slag removal • Carbon and weld cleaning • Deburring and spot facing Specifications: • A: Carbon steel • SF: General purpose

• Spindle mounted and manufactured with crimped carbon steel making them ideal for removing rust and corrosion from most metals • NOTE: Not for use in high speed die grinders Specifications: • A: Carbon steel • SF: Most metals

Flat End

Pointed End

Hollow End

Product Code

Dia. x Shaft

Gauge

Max. Speed

Part Number

38456 38458 38460 10010

13 x 6mm 20 x 6mm 35 x 6mm 25 x 6.35mm (1⁄4”)

20G 20G 20G 33G

25,000rpm 22,000rpm 22,000rpm 22,000rpm

724057 724037 724038 92660012

Wire End Brushes – Crimped, Shaft-Mounted Long Pencil, Flat End

Narrow Wheel, Splayed End

Long Pencil, Pointed End

Rotary Mounted Wheel

Spindle Mounted Busby

Product Code

Description

Size

Gauge

Max. Speed

Part Number

00210011559 00210011560 00210011561 00210011562 00210011563 00210011564 00210011565 00210011567 00210011566 00210011568 00210011569 00210011570 00210011571 00210011554 00210011555 00210011573 00210011574 00210011575 00210011576

Flat End Flat End Flat End Pointed End Pointed End Pointed End Pointed End Hollow End Hollow End Long Pencil, Flat End Long Pencil, Flat End Long Pencil, Pointed End Long Pencil, Pointed End Narrow Wheel, Splayed End Narrow Wheel, Splayed End Narrow Wheel, Splayed End Rotary Mounted Wheel Rotary Mounted Wheel Spindle Mounted, Busby

11mm 19mm 25mm 9mm 11mm 19mm 25mm 26mm 31mm 8 x 50mm 8 x 125mm 8 x 50mm 8 x 125mm 19mm 31mm 38mm 50 x 19mm 50 x 25mm 45mm

30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G 30G

3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm 3,000rpm

60017293 723010 723011 723013 723014 723015 723016 723018 723017 723020 723021 723022 723023 723028 724001 724002 92668003 724005 724006

Product Code

Dia. x Shaft

Gauge

Max. Speed

Part Number

38472 38474 37502

45 x 6mm 65 x 6mm 75 x 6mm

20G 20G 20G

13,000rpm 13,000rpm 6,000rpm

724050 724045 724046

Wire End Brushes – Crimped, Shaft-Mounted • For light duty brushing action • Cleaning rust, scale and dirt • Light deburring • Edge blending • Roughening for adhesion • Finishing for appearance Specifications: • A: Carbon steel • SF: General purpose

Product Code

Dia. x Shaft

Gauge

Max. Speed

Part Number

38466 17958 37514 37516

40 x 6mm 50mm x 1⁄4” 50 x 6mm 75 x 6mm

29G 25G 33G 33G

20,000rpm 20,000rpm 20,000rpm 20,000rpm

724040 723004 724047 723030

Wire End Brushes – Crimped, Shaft-Mounted, Flared End

Wire End Brush – Pencil • Light duty power brush for cleaning in small holes and confined areas Specifications: • A: Carbon steel • SF: Cleaning

250

• Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rubber and plastic flash removal • Rust, paint, scale and slag removal • Carbon cleaning • Weld cleaning • Deburring and spot facing Specifications: • A: Carbon steel • SF: General purpose

• Accommodates natural working angle • For broad range of surfaces and contours • Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rust, paint, scale and slag removal • Deburring and spot facing Specifications: • A: Carbon steel • SF: General purpose

Product Code

Dia. x Shaft

Gauge

Max. Speed

99825

6 x 95mm

34G

8,000rpm

Product Code

Diameter

Gauge

Max. Speed

Part Number

10076

30mm x 1⁄4”

43G

20,000rpm

724051

Part Number

10037

40mm x 1⁄4”

38G

20,000rpm

724049

723032

11142

50mm x 1⁄4”

30G

25,000rpm

724041

The little things, but not every thing. No matter what your thing, get it @ ATOM


Wire End & Hand Brushes Wire End Brushes – Twist Knot, Shaft-Mounted

Wire End Brushes – Tube, Spiral Condenser

• Hollow end • High impact action for severe applications • Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rubber and plastic flash removal • Rust, paint, scale and slag removal • Weld cleaning Specifications: • A: Carbon steel • SF: General purpose

• 3 ⁄16” BSW ferrule on 6mm sizes • 5⁄16” BSW ferrule on sizes 8mm and larger • Available in steel, brass or nylon Specifications: • A: Steel & brass • SF: General purpose

Product Code Wire Type

Dia. x Shaft

No. Knots Gauge

Max. Speed

Part Number

37542 10028 10029

20 x 6mm 11⁄8” x 1⁄4” 3 ⁄4” x 1⁄4”

8 12 8

25,000rpm 22,000rpm 22,000rpm

92660036 92660040 34760009

Carbon Steel Carbon Steel Stainless Steel

20G 24G 27G

Steel

Brass

Wire End Brush – Twist Knot, Shaft-Mounted

Steel

• Quick installation on chuck or collet • High RPM rating • Cleaning and finishing recessed areas or inside pipes • Die, mould and tool cleaning and polishing • Rubber and plastic flash removal • Rust, paint, scale and slag removal • Weld cleaning Specifications: • A: Carbon steel • SF: General purpose

4

Diameter 6mm 8mm 9mm 13mm 16mm 19mm 25mm

Product Code 00210011522 00210011524 00210011527 00210011533 00210011537 00210011539 00210011541

Brass Part Number 60017313 60017314 60017315 724010 724011 724012 724013

Product Code 00210011523 00210011525 00210011529 – 00210011538 00210011540 00210011542

Part Number 60017320 88809946 88840121 – 92660028 92668004 60017321

Wire Hand Brushes • Timber handle • Ideal for welders

Product Code

Dia. x Shaft

No. Knots

Gauge

Max. Speed

Part Number

37506

80 x 6mm

2013422

25G

25,000rpm

724048

Wire End Brushes – Tube, Spiral Boiler • ½” BSW ferrule • Also available in other materials Specifications: • A: Steel • SF: General purpose

Wire

Rows

Part Number

Wire

Rows

Part Number

3

92660005

Brass

4

715005

Brass Product Code

Diameter

Part Number

Product Code

Diameter

Part Number

00210011511 00210011512 00210011513 00210011514 00210011515

25mm 31mm 38mm 44mm 50mm

92660006 92660007 92668012 60017322 60017323

00210011517 00210011518 00210011519 00210011520 00210011521

56mm 63mm 75mm 81mm 100mm

60017324 60017325 60017327 60017328 60017331

Wire End Brushes – Tube, Spiral Condenser

Diameter

Part Number

44273 44277 44275

12.5mm 16mm 19mm

724052 724056 724054

Steel/Stainless Steel Stainless Steel

3

715001

Steel

3

722001

Stainless Steel

4

715002

Steel

4

722002

Stainless Steel

5

715003

Steel

5

722003

Stainless Steel

6

715004

Steel

6

722004

Some people need to be told more than once.

• 1⁄8” pipe nipple and 5⁄16” female bolt thread on same end • Deburring, cleaning and finishing internal diameters • Pipe and flue cleaning • Boiler tube cleaning • Brush length: 100mm • Overall length: 190mm Specifications: • A: Carbon steel • SF: General purpose

Product Code

Brass

Find safety signs on page 117

Product Code

Diameter

44274 44276 –

25mm 30mm –

Part Number 724053 724055 –

1800 999 024 | atom.com.au | getit@atom.com.au

251


Surface Preparation Discs

4

Preparation Discs – Open Weave, Depressed Centre

Preparation Discs – Open Weave • Can be used in face-down grinding • Best performance at a recommended cutting speed of 30–35m/s • Recommended for rust removal, scale, old paint and surface prep work Specifications: • A: Silicon carbide • SF: Surface preparation

• Can be used in face-down grinding • Best performance at a recommended cutting speed of 30–35m/s • Recommended for rust removal, scale, old paint and surface prep work Specifications: • A: Silicon carbide • SF: Surface preparation

Product Code

Diameter

Max. Speed

Part Number

42780052 42780077

50mm 75mm

8,000rpm 5,000rpm

36004091 36004092

Preparation Discs – Open Weave

Dia. x Bore

Max. Speed

Part Number

44692711 44692716 44692726

100 x 13mm 115 x 13mm 125 x 13mm

10,000rpm 10,000rpm 10,000rpm

36004093 36004094 36004095

Preparation Discs – Open Weave, Depressed Centre

• Can be used in face-down grinding • Designed for use on slow-running angle grinders • Best performance at a recommended cutting speed of 30–35m/s Specifications: • A: Silicon carbide • SF: Surface preparation

• Rigid type depressed centre discs • Aggressive, open-web disc for cleaning welds, removing rust, paint and other coatings • Load and smear resistant • Colour: purple Specifications: • A: Silicon carbide • SF: Surface preparation

Product Code

Dia. x Bore

Max. Speed

Part Number

44692715 44692725

115 x 22.2mm 125 x 22.2mm

10,000rpm 10,000rpm

106166 92648016

Preparation Discs – Open Weave

Product Code

Dia. x Bore

Grade

Part Number

XC000777315 XC000777323 XC000777331 XC000777349

100 x 16mm 115 x 22mm 125 x 22mm 180 x 22mm

Extra Coarse Firm Extra Coarse Firm Extra Coarse Firm Extra Coarse Firm

735009 60015305 735011 60015307

Preparation Discs – Open Weave, Depressed Centre

• Aggressive open-web disc for cleaning welds, removing rust and stripping paint • May be mounted on a straight shaft tool or bench motor • Load and smear resistant • Black – flexible • Purple – rigid Specifications: • A: Silicon carbide • SF: Surface preparation

252

Product Code

Bear-Tex® • Removal of surface rust and residue, corrosion, light weld splatter, dirt, mill scale and other similar surface containments • Surface preparation before coatings are applied • Surface preparation before welding • Cleaning and conditioning after welding • Paint and epoxy coating removal Specifications: • A: Silicone carbide • G: Extra coarse • SF: Surface preparation

Product Code

Dia. x Bore

Grade

Colour

Part Number

AC010593575 AC010565086 AC010593583 AC010565078 AC010593146 AN000417467

100 x 6mm 100 x 6mm 150 x 12mm 150 x 12mm 180 x 20mm 180 x 20mm

Extra Coarse – Flex Extra Coarse – Firm Extra Coarse – Flex Extra Coarse – Firm Extra Coarse – Flex Extra Coarse – Firm

Black Purple Black Purple Black Purple

60015367 92748145 60015368 92748067 60015369 60015370

Product Code

Dia. x Bore

Max. Speed

Part Number

66261030651 66261009649 66261030655 66261009586

100 x 16mm 115 x 22mm 125 x 22mm 178 x 22mm

15,300rpm 13,300rpm 12,250rpm 8,600rpm

92748021 92748022 92748029 92748030

The little things, but not every thing. No matter what your thing, get it @ ATOM


Surface Finishing Discs Finishing Discs – Small Diameter

Finishing Discs – Roloc

• Selection of quick change discs with fastening system • CDR system is compatible with Norton Lock‑It and 3M Roloc™ fastening systems

Roloc™ • Industry leader for surface conditioning applications including cleaning, finishing, blending and deburring • Tough, aggressive non-woven material Specifications: • A: Aluminium oxide • SF: Surface finishing

Aluminium Oxide

Aluminium Oxide A-FORTE

Zirconia Aluminia

Ceramic Oxide

Aluminium Oxide CONTOUR

Coarse

Medium

Very Fine

Product Code

Material Type

50mm Diameter Discs 42770503 Aluminium Oxide 42770506 Aluminium Oxide 42770508 Aluminium Oxide 42770512 Aluminium Oxide 42770518 Aluminium Oxide 42770532 Aluminium Oxide 42771503 Aluminium Oxide A-FORTE High Performance 42771506 Aluminium Oxide A-FORTE High Performance 42771508 Aluminium Oxide A-FORTE High Performance 42771512 Aluminium Oxide A-FORTE High Performance 42773503 Zirconia Alumina 42773506 Zirconia Alumina 42773508 Zirconia Alumina 42776503 Ceramic Oxide - Reduced Heat 42776506 Ceramic Oxide - Reduced Heat 42776508 Ceramic Oxide - Reduced Heat 42776512 Ceramic Oxide - Reduced Heat 42759005 Aluminium Oxide - CONTOUR 42759006 Aluminium Oxide - CONTOUR 42759007 Aluminium Oxide - CONTOUR 42759008 Aluminium Oxide - CONTOUR 42781501 Surface Conditioning 42781502 Surface Conditioning 42781504 Surface Conditioning 75mm Diameter Discs 42770703 Aluminium Oxide 42770706 Aluminium Oxide 42770708 Aluminium Oxide 42770712 Aluminium Oxide 42770718 Aluminium Oxide 42770732 Aluminium Oxide 42771703 Aluminium Oxide A-FORTE High Performance 42771706 Aluminium Oxide A-FORTE High Performance 42771708 Aluminium Oxide A-FORTE High Performance 42771712 Aluminium Oxide A-FORTE High Performance 42773703 Zirconia Alumina 42773706 Zirconia Alumina 42773708 Zirconia Alumina 42776703 Ceramic Oxide - Reduced Heat 42776706 Ceramic Oxide - Reduced Heat 42776708 Ceramic Oxide - Reduced Heat 42776712 Ceramic Oxide - Reduced Heat 42781751 Surface Conditioning 42781752 Surface Conditioning 42781754 Surface Conditioning Holder Pads CDR 47600052 Economy 47600053 Economy

4

Grit

Part Number

36 60 80 120 180 320 36 60 80 120 36 60 80 36 60 80 120 60 80 120 180 Coarse Medium Very Fine

153691 140840 140841 140843 79912546 36004074 36004077 36004078 36004079 36004080 216408 36004084 36004085 36004086 36004087 36004088 36004089 36004070 36004071 36004072 36004073 721001 79912656 721003

36 60 80 120 180 320 36 60 80 120 36 60 80 36 60 80 120 Coarse Medium Very Fine

175250 183102 175251 183101 36004075 36004076 36004081 36004082 79912547 36004083 92748107 183576 172892 218058 36004090 92648019 92648020 92748097 92748098 92748099

50mm 75mm

92748101 92748100

Product Code

Diameter

Grade

Colour

Part Number

61500141736 61500141728 61500141710 61500141801 61500141793 61500141785

50mm 50mm 50mm 75mm 75mm 75mm

Coarse Medium Very Fine Coarse Medium Very Fine

Brown Maroon Blue Brown Maroon Blue

88891859 88850923 60015288 88888398 88850922 88850925

Finishing Discs – Roloc™ Roloc™ • General purpose grinding and finishing in metal fabrication • Finer grades can be used for rough sanding in woodworking • Aluminium oxide cloth discs constructed on a durable polyester backing • Resin bonded for heat resistance Specifications: • A: Aluminium oxide • G: 24 – 120 • SF: General purpose

Product Code

Diameter

Grit

Part Number

60440208936 60440209017 60440209140 60440208902 60440208944 60440209025 60440209157 60440209306

50mm 50mm 50mm 75mm 75mm 75mm 75mm 75mm

36 50 80 24 36 50 80 120

92640030 60015289 60015290 60015291 60015292 60015293 81004174 60015294

Looking to do the job the old fashioned way? Find hand files on page 412

1800 999 024 | atom.com.au | getit@atom.com.au

253


Surface Finishing Discs

4

Finishing Discs – Roloc™ & Centre-Pin

Finishing Discs – General Purpose

• Roloc™ and centre pin fastening • Combining the most advanced blending and finishing capabilities, these non-woven anti-loading (AL) surface conditioning discs give you a finish that can meet the highest standards of quality control • The unique, open web construction resists loading, providing up to twice the service life giving an easy-to-handle blend on aluminium, oily mild steel and other soft metal surfaces Specifications: • A: Aluminium oxide • SF: Surface finishing

• P-grade premium aluminium oxide grain • Strong C-weight latex/paper backing • Water-based, non-loading stearate • Resists loading • 150mm • Other sizes available on request Specifications: • A: Aluminium oxide • G: 36 – 400 • SF: General purpose

No Hole

6+1 Hole

8+1 Hole

No Hole

Product Code

Type

Dia. x Bore

Grade

Part Number

61500313327 61500313335 61500313343 61500313350 61500313368 61500313376 61500301660 61500313640 61500313533 61500313756 61500313665 61500313558 61500313772 61500301744 61500313574

Roloc™ Roloc™ Roloc™ Roloc™ Roloc™ Roloc™ Centre-Pin Centre-Pin Centre-Pin Centre-Pin Centre-Pin Centre-Pin Centre-Pin Centre-Pin Centre-Pin

50mm 50mm 50mm 76mm 76mm 76mm 115 x 22mm 115 x 22mm 115 x 22mm 127 x 22mm 127 x 22mm 127 x 22mm 178 x 22mm 178 x 22mm 178 x 22mm

Very Fine Medium Coarse Very Fine Medium Coarse Very Fine Medium Coarse Very Fine Medium Coarse Very Fine Medium Coarse

36003042 36003043 36003044 36003045 36003046 36003047 36003048 36003049 36003050 36003051 36003052 36003053 36003054 36003055 36003056

Finishing Discs – Centre-Pin • The best starting point for all your finishing, cleaning and light deburring needs • Easy to attach and remove with hook-and-loop backup pads for right angle grinders and random orbital sanders • Can be used to create decorative finishes on metal Specifications: • A: Aluminium oxide • SF: Surface finishing

6+1 Hole

8+1 Hole

Grit

Product Code

Part Number Product Code

Part Number Product Code

Part Number

36 40 60 80 100 120 150 180 240 320 400

– 66623320541 66623320542 66623320543 66623320544 66623320545 66623320546 66623320547 66623320548 66623320549 –

– 92648041 79914033 92648042 36003337 92748146 79914027 79914028 79914029 79914030 –

79914039 152762 92648037 153326 268241 79914037 249633 79013550 150469 79013551 79914031

– – 36003338 79914040 36003339 36003340 218227 36003341 36003342 36003343 79914032

66623320554 66623320555 66623320556 66623320557 66623320558 66623320559 66623320560 66623320561 66623320562 66623320563 66623320572

– – 66623320667 66623320736 66623320738 66623320741 66623320742 66623320744 66623320746 66623320748 66623320750

Finishing Discs – Ceramic Cubitron™ II 775L • Featuring triangular Precision Shaped Grain mineral • As the triangular shaped grain wears, it continually fractures to form sharp points that slice through the substrate, wear evenly, and provide extra‑long life and consistency • 150mm Specifications: • A: Ceramic • G: 80 – 220 • SF: General purpose 36003079 Clean Sand Hookit Film

36003084 Hookit Plain Film

Grit

Product Code

Part Number

Product Code

Part Number

80 120 150 180 220

60440296212 60440296220 60440255796 60440255853 60440255911

36003079 36003080 36003081 36003082 36003083

60440296170 60440296188 60440298408 60440298390 60440298879

36003084 36003085 36003086 36003087 36003088

Finishing Discs – Self-Stick Medium

254

Very Fine

Coarse

Product Code

Dia. x Bore

Grade

Colour

Part Number

61500291473 61500291465 61500291457 61500291804 61500291796 61500291481 61500291838 61500291820 61500291812 61500291853 61500291507 61500291846

100 x 16mm 100 x 16mm 100 x 16mm 115 x 22mm 115 x 22mm 115 x 22mm 125 x 22mm 125 x 22mm 125 x 22mm 180 x 22mm 180 x 22mm 180 x 22mm

Coarse Medium Very Fine Coarse Medium Very Fine Coarse Medium Very Fine Coarse Medium Very Fine

Brown Maroon Blue Brown Maroon Blue Brown Maroon Blue Brown Maroon Blue

721007 721008 721009 60015295 60015296 60015297 92748070 60015298 60015299 721016 721017 721018

• Bonding agent: resin fibre • For general sanding applications on most materials • Diameter: 150mm (6”) Specifications: • A: Aluminium oxide • G: 60 – 800 • SF: General purpose

Grit

Part Number

Grit

Part Number

60 80 100 120 180

922001 922002 922003 922004 923002

240 320 400 600 800

923003 923004 923005 92740021 60021229

The little things, but not every thing. No matter what your thing, get it @ ATOM


Surface Finishing Discs & Backing Pads Finishing Discs – Hook & Loop

Backing Pads – Roloc

• Hook and loop self fastening system • Backing: latex paper • Bonding agent: resin • Coating: open grain structure Specifications: • A: Aluminium oxide • G: 40 – 1,200 • SF: Wood, hardwood, soft wood, varnishes & lacquers, body repair shop and plastic

• Optimise abrasive performance with the right backup system • 3M™ Roloc™ Disc Pads can mount directly to the 3M™ Disc Sanders or be used with 3M™ Roloc™ disc pad shaft to fit collet chuck tools

4

No Hole

15 Hole

Grit

Product Code

Part Number Product Code

Part Number

40 60 80 100 120 150 180 240 320 400 500 600 800 1,200

75600699 75600700 75600701 75600725 75600726 75600727 75600728 75600729 75600730 75600731 75602504 75600732 75600733 75600676

209435 289137 209436 36004266 81050075 36004267 209437 275293 36004268 36004269 36004280 36004270 36004271 36004265

– 36004272 221559 36004273 221557 36004274 232003 36004275 36004276 36004277 – 36004278 36004279 36004264

– 75600747 75600748 75600749 75600750 75600751 75600752 75600754 75600755 75600756 – 75600757 75600758 75600675

Product Code 60440237653 60440237661 60980025286 AC010591421

Description Backing Pads – Medium Disc Pad Shaft

Size

Part Number

Dia.: 50mm, Int. Thread: 1⁄4” – 20 Dia.: 75mm, Int. Thread: 1⁄4” – 20 Dia.: 75mm, Thread: M14 x 2.0 Shank: 1⁄4”, Ext. Thread: 1⁄4” – 20

60015300 88891860 60021226 92748158

Backing Pads – Centre Pin • Hook and loop pad holders for use with Scotch‑Brite™ Surface Conditioning Discs • Centre-pin system reduces the risk of disc fly-off and helps to locate the disc for less vibration through the tool • Designed for use with angle grinders

Backing Pads – Combiclick® • Suitable for Combiclick® Grinding Fibre Discs (64183115 & 64183125) • Save time with the quick mounting system • Less heat and less noise • M14 • Diameter: 115/125mm • Speed: 12,200 – 13,300rpm

Product Code

Diameter x Thread

Part Number

GN030104493 DE272906186 DE272906178 GN030106126

100mm x M10 115mm x M14 x 2.0 125mm x M14 x 2.0 180mm x M14 x 2.0

36003041 60015302 92748072 60015303

Backing Pads – Cubitron™ II • Unique optimised rib pattern • Resistant to temperatures over 100°C • Used in conjunction with 3M™ Cubitron™ II Fibre Discs, this solution offers improved disc life and cut rate • Colour: red

92278411

60021255

Product Code

Description

Colour

Part Number

64199002 64199001 44890150

Hard Medium Soft

Blue Grey Black

92278411 60021255 92648065

Product Code

Model #

Size

DE272923777 DE272923785

64861 64862

125mm 180mm

Backing Pads – General Purpose

Backing Pads – General Purpose

• Maximum speed: 80m/s

• Designed to deliver consistent grinding results • The 115, 125 and 180mm pads all feature a ribbed face design to assist the mineral breakdown on the fibre disc and allow the user to use the disc to its maximum life

Part Number 129890 158368

Product Code

Size

Thread

Part Number

Product Code

Diameter x Thread

Part Number

47600050 44890030 44890040 44890060

100mm 115mm 125mm 180mm

M10 x 1.5 M14 x 2.0 M14 x 2.0 M14 x 2.0

92648012 92648013 92648014 92648015

XC003410104 XC003410039 XC003410047 DC272921404

100mm x M10 x 1.5 115mm x M14 x 2.0 or 5⁄8” 125mm x M14 x 2.0 or 5⁄8” 180mm x M14 x 2.0 or 5⁄8”

60015341 60021241 60021242 60021243

1800 999 024 | atom.com.au | getit@atom.com.au

255


Sanding Pads, Sheets & Rolls

4

Sanding Pads

Sanding Rolls

• Suitable for light grinding, deburring and cleaning work on metal, plastics (GRP), stainless steel (INOX), aluminium, paint and fillers • Dimensions: 150 x 230mm

• Aluminium oxide • Suitable for use on a variety of surfaces and materials • High quality backing for optimal sanding • Stearated to help prevent clogging • Highly flexible • Roll: 120mm x 25m

Product Code

Colour

Material Type

Grit

47200036 47200037 47200032 47200033 47200034

Green Maroon Tan Grey Black

General Purpose Medium Coarse Fine Coarse/Medium

240 - 360 180 - 240 100 - 150 600 150 - 240

Part Number 230518 230520 250846 230521 250845

Sanding Pads • Universally used in a variety of applications, Scotch-Brite hand pads are an excellent way to clean, scuff, grain, denib, defuzz, blend or finish a variety of materials • Use by hand or with a hand pad block • Dimensions: 230 x 150mm

Product Code

Grit

Part Number

75603023 75601305 75601306

40 60 80

714002 714103 714105

Product Code

Grit

Part Number

75601338 75601308 75601311

100 120 240

714008 714010 60019934

Sanding Rolls • Aluminium oxide • Economy rolls are suitable for hand grinding of all types of metals and materials

Product Code

Grit

Part Number

Product Code

Grit

Part Number

40 60 80 100 120

79912624 36004105 79912625 114972 240902

47300033 47300034 47300035 47300036 –

150 180 240 320 –

36004104 79912626 174300 79912627 –

40 60 80 100 120

36004106 79912628 92700010 36004107 79912629

47300045 47300046 47300047 47300048 –

150 180 240 320 –

92700003 179932 184002 92700009 –

40 60 80 100 120

929001 929002 929003 929004 930001

47300054 47300055 47300056 47300057 –

150 180 240 320 –

930002 930003 930004 930005 –

25mm x 50m Product Code

Grade

Colour

Part Number

61500301017 61500301025 61500123239 61500136686 XE006000022 61500123247 WN200031550

Heavy Duty – 7440 Blending – 7446 General Purpose – 7447 Production Purpose – 8447 General Purpose – 96 Ultra Fine – 7448 Cleaning – 449

Tan Maroon Maroon Maroon Green Grey White

60015310 60015311 88898717 60015312 60021245 60015313 60015314

Sanding Sheets – Waterproof • • • • •

Abrasive: silicon carbide Backing: waterproof latex paper Coating: closed grain structure Bonding agent: resin Suitable for: metal, varnishes and lacquers, body repair shop, plastic • Pack: 100 sheets • Type: WEC • Dimensions: 230 x 280mm

256

Product Code

Grit

Part Number

75600588 75600589 75600590 75600591 75600592 75600593 75600594

80 100 120 150 180 240 320

704002 704003 704004 705001 705002 705004 706002

47300037 47300038 47300039 47300031 47300032 40mm x 50m 47300040 47300041 47300042 47300043 47300044 50mm x 50m 47300049 47300050 47300051 47300052 47300053

Product Code

Grit

Part Number

75600595 75600597 75600598 75600599 75600601 75600602 75603651

400 600 800 1,000 1,200 1,500 2,000

706004 707001 707002 707003 707004 92710000 246215

Get that surface sparkling like a diamond with polishing compound on page 859

The little things, but not every thing. No matter what your thing, get it @ ATOM


Linishing Belts Linishing Belts

Linishing Belts – Ceramic

• Belt size: 50(w) x 915(l)mm • 10 per pack Specifications: • A: Aluminium oxide • G: Coarse – fine • SF: Metal & timber

Cubitron™ II 947A

4

• Last up to four times longer than conventional ceramic abrasive belts and cut faster throughout their life • Additional sizes are available on request • X-weight polycotton backing provides greater flexibility • Backing excels in low/medium pressure applications Specifications: • A: Ceramic • G: Coarse – fine • SF: Stainless steel, mild steel & aluminium

Product Code

Grit

Grade

AAA50/915-040 AAA50/915-060 AAA50/915-080 AAA50/915-120

40 60 80 120

Coarse Medium Medium Fine

Part Number 119481 119482 119483 119484

Linishing Belts • For cleaning, finishing, blending and deburring • The reinforced backing offers good flexibility whether working on a file belt or backstand • An ideal way to add a great finish or remove burrs without gouging or undercutting the work piece • Works well to remove coarse grindlines, mill marks, or small burrs left by cutting tools or conventional abrasives • Additional sizes are available on request Specifications: • A: Aluminium oxide & silicon carbide • G: Coarse – super fine • SF: Metal & timber

Product Code

Abrasive

Belt Size (W x L)

Grade

Part Number

AC010611245 AC010611252 AC010611260 AC010611278 AC019410839 AC019410847 AC019410854 AC019410862 AC019411076 AC019411084 AC019411092 AC019411100 AC019411159 AC019411167 AC019411175 AC019411183

Aluminium Oxide Aluminium Oxide Aluminium Oxide Silicon Carbide Aluminium Oxide Aluminium Oxide Aluminium Oxide Silicon Carbide Aluminium Oxide Aluminium Oxide Aluminium Oxide Silicon Carbide Aluminium Oxide Aluminium Oxide Aluminium Oxide Silicon Carbide

50 x 915mm 50 x 915mm 50 x 915mm 50 x 915mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm

Coarse Medium Very Fine Super Fine Coarse Medium Very Fine Super Fine Coarse Medium Very Fine Super Fine Coarse Medium Very Fine Super Fine

36003057 36003058 36003059 36003060 36003061 36003062 36003063 36003064 36003065 36003066 36003067 36003068 36003069 36003070 36003071 36003072

KNOW YOUR Grades Not all belts are defined by their grit, some are better explained with their grade. To give you a better idea of what each grade means, this is how they are defined by ISO 6344. Extra Coarse grades include 12, 16, 20, 24, 30 & 36 grit. Coarse grades include 40 & 50 grit. Medium grades include 60 & 80 grit. Fine grades include 100 & 120 grit. Very Fine grades include 150, 180, 220, 240, 280, 320 & 360 grit. Super Fine grades include 800, 1,000 & 1,200 grit.

Product Code

Belt Size (W x L)

Grit

Grade

Part Number

AC010610445 AC010610452 AC010610460 AC010610478 AC010610486 AC010610494 AC010610502 AC010610510 AC010610726 AC010610734 AC010610742 AC010610759 AC010610809 AC010610817 AC010610825 AC010610833

50 x 915mm 50 x 915mm 50 x 915mm 50 x 915mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm

40 60 80 120 40 60 80 120 40 60 80 120 40 60 80 120

Coarse Medium Medium Fine Coarse Medium Medium Fine Coarse Medium Medium Fine Coarse Medium Medium Fine

36003092 36003093 36003094 36003095 36003096 36003097 36003098 36003099 36003100 36003101 36003102 36003103 36003104 36003105 36003106 36003107

Linishing Belts – Ceramic Cubitron™ II 984F • Last up to four times longer than conventional ceramic abrasive belts and cut faster throughout their life • Additional sizes are available on request • Backing excels in medium/high pressure applications Specifications: • A: Ceramic • G: Extra coarse – fine • SF: Stainless steel, cobalt, chrome & nickel

Product Code

Belt Size (W x L)

Grit

Grade

Part Number

AC010609561 AC010609579 AC010609587 AC010609595 AC010609603 AC010609611 AC010609629 AC010609637 AC010609843 AC010609850 AC010609868 AC010609876 AC010609926 AC010609934 AC010609942 AC010609959

50 x 915mm 50 x 915mm 50 x 915mm 50 x 915mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 50 x 1,220mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 915mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm 100 x 1,520mm

36 60 80 120 36 60 80 120 36 60 80 120 36 60 80 120

Extra Coarse Medium Medium Fine Extra Coarse Medium Medium Fine Extra Coarse Medium Medium Fine Extra Coarse Medium Medium Fine

36003108 36003109 36003110 36003111 36003112 36003113 36003114 36003115 36003116 36003117 36003118 36003119 36003120 36003121 36003122 36003123

1800 999 024 | atom.com.au | getit@atom.com.au

257


Linishing Belts

4

Linishing Belts

Linishing Belts

Specifications: • A: Aluminium oxide • SF: Unalloyed steel, alloyed steel & non-ferrous steel

Specifications: • A: Zirconia alumina • SF: Steel, stainless steel (INOX), nonferrous metals & cast iron

Product Code 50 x 914mm 75435932 75435933 75435934 75435935 75435936 75435937 50 x 1,220mm 75435942 75435943 75439716 75401493 75403019 75414627 50 x 1,520mm 75465795 75435945 75435946 75435947 75442685 75435103 50 x 2,440mm 75436211 75435952 75435953 75435954 75428222 75435955 75 x 2,000mm 75400916 75417613 75417160 75417161 75417162 75404187 100 x 610mm 75600581 75600583 100 x 914mm 75436253 75435963 75435538 75435964 75435965 75435966 100 x 1,220mm 75458359 75404295 75417620 75402529 75400894 100 x 1,330mm 75427840 75436809 100 x 1,520mm 75435974 75426966 75427727 75427835 75428187 75472255

258

Grit

Part Number

Product Code

Grit

Part Number

24 36 40 60 80 100

36004186 36004187 280019 79912580 234646 265542

75435938 75435939 75435940 75435941 75437221 75427840

120 150 180 240 320 400

36004188 36004189 36004190 36004191 36004243 36004178

24 36 40 60 80 100

36004192 36004193 36004247 36004150 36004152 275015

75418656 75401414 75403361 75435944 75432305 –

120 150 180 240 320 –

79910190 36004149 36004154 36004194 36004182 –

24 36 40 60 80 100

36004256 36004195 234341 36004196 79912577 36004183

75435948 75444979 75435949 75435950 75435951 –

120 150 180 240 320 –

36004197 36004251 36004198 36004199 36004200 –

24 36 40 60 80 100

36004237 36004201 36004202 36004203 270779 36004204

75440344 75435956 75435957 75435958 75428905 –

120 150 180 240 320 –

36004249 36004205 36004206 36004207 36004180 –

24 36 40 60 80 100

36004148 36004171 36004167 36004168 36004169 36004156

75403788 75404399 75400753 75400792 75417612 –

120 150 180 240 320 –

36004155 36004160 36004144 36004145 36004170 –

40 60

36004261 36004262

75600584 75600580

80 120

36004263 36004260

24 36 40 60 80 100

36004238 36004208 36004184 36004209 79912561 36004210

75427526 75456592 75435967 75435968 75437212 –

120 150 180 240 320 –

36004175 36004254 36004211 36004212 36004242 –

24 36 40 60 80

36004255 36004157 36004172 36004151 36004146

75400895 75405128 75418846 75451640 75428907

100 120 180 240 320

36004147 36004161 36004173 36004253 36004181

60 80

36004179 36004240

75437471 75436477

100 120

36004246 36004239

24 36 40 60 80 100

36004213 36004174 36004176 36004177 245756 36004258

75435975 75472258 75466793 75435976 75440095 –

120 150 180 240 320 –

36004214 36004259 36004257 36004215 36004248 –

Product Code 10 x 330mm 75435606 75425043 75425044 20 x 520mm 75437254 75437256 75437257 50 x 914mm 75436051 75436052 75436053 75436055 50 x 1,220mm 75436059 75436060 75436061 75405830 50 x 1,520mm 75436065 75436066 75436067 75436068 50 x 2,440mm 75436073 75436074 75436075 75 x 2,000mm 75415617 75415927 75415928 75415614 100 x 914mm 75436086 75436087 75436088 75436089 100 x 1,220mm 75447492 75408379 75403318 75404296 100 x 1,520mm 75436096 75436097 75436098 75431709

Grit

Part Number

Product Code

Grit

Part Number

40 60 80

36004185 239721 267938

75442466 75425053 –

100 120 –

36004250 79912599 –

40 60 80

36004244 79912604 36004245

75436943 75436596 –

100 120 –

36004241 272232 –

24 36 40 60

36004216 79912610 231234 222784

75436056 75436057 75436058 –

80 100 120 –

231235 36004217 79912609 –

24 36 40 60

36004218 36004219 36004220 280960

75409904 75436063 75436064 –

80 100 120 –

147447 147448 36004221 –

24 36 40 60

36004222 36004223 36004224 79912606

75436069 75436070 75436071 –

80 100 120 –

79912607 36004225 79912605 –

36 40 60

36004226 36004227 79912608

75436076 75436077 75436078

80 100 120

36004228 36004229 36004230

24 36 40 60

92698087 92698079 36004166 250553

75415615 75415618 75415616 –

80 100 120 –

36004163 36004165 36004164 –

24 36 40 60

36004231 36004232 248444 79912597

75436090 75436091 75436092 –

80 100 120 –

79912598 227485 36004233 –

24 36 40 60

36004252 36004162 36004153 36004158

75404297 75404298 75404299 –

80 100 120 –

243834 36004159 186115 –

24 36 40 60

36004234 164520 79912594 230816

75436099 75436100 75436101 –

80 100 120 –

79912595 36004235 36004236 –

Need a new linishing machine? Find ‘em on page 308

The little things, but not every thing. No matter what your thing, get it @ ATOM


Sanding Bands Sanding Bands – Aluminium Oxide

Sanding Bands – Zirconia

• For high stock removal • Good tool life • Easily mounted and removed by turning the spiral band slightly to the right Specifications: • A: Aluminium oxide • G: 40 – 150 • SF: Steel & stainless steel

• Fast stock removal • Long tool life Z-COOL: • Active grinding additives in the coating resulting in cooler grinding

Product Code 42224115 42226115 42228115 42231108 42231115 42232108 42232115 42232124 42233108 42233115 42234108 42234115 42235105 42235108 42235115 42236103 42236105 42236108 42236115 42236124 42236505 42236508 42236515 42236524 42237104 42237105 42237108 42237115 42237505 42237508 42237515 42238104 42238105 42238108 42238115 42239104 42239105 42239108 42239115 42239504 42239505 42239508 42239515 42240104 42240103 42240105 42240108 42240115 42240504 42240505 42240508 42240515 42241104 42241105 42241108 42241115 42242104 42242105 42242108 42242115 42213104 42213105 42213108

Specification KSB0410 A KSB0610 A KSB0810 A KSB1010 A KSB1010 A KSB1020 A KSB1020 A KSB1020 A KSB1310 A KSB1310 A KSB1325 A KSB1325 A KSB1510 A KSB1510 A KSB1510 A KSB1530 A KSB1530 A KSB1530 A KSB1530 A KSB1530 A KSB1925 A KSB1925 A KSB1925 A KSB1925 A KSB2220 A KSB2220 A KSB2220 A KSB2220 A KSB2525 A KSB2525 A KSB2525 A KSB3020 A KSB3020 A KSB3020 A KSB3020 A KSB3030 A KSB3030 A KSB3030 A KSB3030 A KSB3825 A KSB3825 A KSB3825 A KSB3825 A KSB4530 A KSB4530 A KSB4530 A KSB4530 A KSB4530 A KSB5125 A KSB5125 A KSB5125 A KSB5125 A KSB6030 A KSB6030 A KSB6030 A KSB6030 A KSB7530 A KSB7530 A KSB7530 A KSB7530 A GSB10040 A40 GSB10040 A60 GSB10040 A80

Size 4 x 10mm 6 x 10mm 8 x 10mm 10 x 10mm 10 x 10mm 10 x 20mm 10 x 20mm 10 x 20mm 13 x 10mm 13 x 10mm 13 x 25mm 13 x 25mm 15 x 10mm 15 x 10mm 15 x 10mm 15 x 30mm 15 x 30mm 15 x 30mm 15 x 30mm 15 x 30mm 19 x 25mm 19 x 25mm 19 x 25mm 19 x 25mm 22 x 20mm 22 x 20mm 22 x 20mm 22 x 20mm 25 x 25mm 25 x 25mm 25 x 25mm 30 x 20mm 30 x 20mm 30 x 20mm 30 x 20mm 30 x 30mm 30 x 30mm 30 x 30mm 30 x 30mm 38 x 25mm 38 x 25mm 38 x 25mm 38 x 25mm 45 x 30mm 45 x 30mm 45 x 30mm 45 x 30mm 45 x 30mm 51 x 25mm 51 x 25mm 51 x 25mm 51 x 25mm 60 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm 75 x 30mm 75 x 30mm 75 x 30mm 75 x 30mm 100 x 40mm 100 x 40mm 100 x 40mm

Grit 150 150 150 80 150 80 150 240 80 150 80 150 60 80 150 50 60 80 150 240 60 80 150 240 50 60 80 150 60 80 150 40 60 80 150 40 60 80 150 40 60 80 150 40 50 60 80 150 40 60 80 150 40 60 80 150 40 60 80 150 40 60 80

Max. Speed 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 36,000rpm 36,000rpm 36,000rpm 36,000rpm 36,000rpm 36,000rpm 36,000rpm 36,000rpm 30,000rpm 30,000rpm 30,000rpm 30,000rpm 26,000rpm 26,000rpm 26,000rpm 26,000rpm 22,900rpm 22,900rpm 22,900rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 15,900rpm 15,900rpm 15,900rpm 15,900rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 11,200rpm 11,200rpm 11,200rpm 11,200rpm 9,500rpm 9,500rpm 9,500rpm 9,500rpm 7,600rpm 7,600rpm 7,600rpm 7,600rpm 5,700rpm 5,700rpm 5,700rpm

Part Number 60019806 60019807 60019808 60019809 60019810 60019811 60019812 60019813 60019814 60019815 60019816 60019817 60019818 60019819 60019820 60019821 60019822 60019823 60019824 60019825 60019826 60019827 60019828 60019829 60019830 60019831 60019832 60019833 60019836 60019837 60019838 60019839 60019840 60019841 60019842 60019843 60019845 60019846 60019847 60019849 60019850 60019851 60019852 60019853 60019854 60019855 60019856 60019857 60019859 60019860 60019861 60019862 60019863 92738076 60019866 60019867 60019868 60019869 60019870 60019871 36001054 36001055 36001056

4

Specifications: • A: Zirconia • G: 36 – 150 • SF: Steel & stainless steel

Product Code

Specification

Size

Grit

Max. Speed

Part Number

42217064 42217065

GSB 1325 Z GSB 1325 Z

13 x 25mm 13 x 25mm

60 80

44,000rpm 44,000rpm

60019872 60019873

42217092

GSB 1925 Z

19 x 25mm

40

30,000rpm

60019874

42217094

GSB 1925 Z

19 x 25mm

60

30,000rpm

60019875

42217095

GSB 1925 Z

19 x 25mm

80

30,000rpm

60019876

42217112

GSB2525 Z

25 x 25mm

40

22,900rpm

60019877

42217114

GSB2525 Z

25 x 25mm

60

22,900rpm

60019878

42217115

GSB2525 Z

25 x 25mm

80

22,900rpm

60019879

42217132

GSB 3030 Z

30 x 30mm

40

19,100rpm

60019880

42217133

GSB 3030 Z

30 x 30mm

50

19,100rpm

60019881

42217134

GSB 3030 Z

30 x 30mm

60

19,100rpm

60019882

42217135

GSB 3030 Z

30 x 30mm

80

19,100rpm

60019883

42217142

GSB3825 Z

38 x 25mm

40

15,900rpm

60019884

42217144

GSB3825 Z

38 x 25mm

60

15,900rpm

60019885

42217152

GSB4530 Z

45 x 30mm

40

12,700rpm

60019886

42217154

GSB4530 Z

45 x 30mm

60

12,700rpm

60019887

42217155

GSB4530 Z

45 x 30mm

80

12,700rpm

60019888

42217162

GSB5125 Z

51 x 25mm

40

11,200rpm

60019889

42217164

GSB5125 Z

51 x 25mm

60

11,200rpm

60019890

42217165

GSB5125 Z

51 x 25mm

80

11,200rpm

60019891

42206183 42206188 42206285 42207184 42207188 42209188 42210182 42210285

GSB 1530 Z-COOL GSB 1530 Z-COOL GSB 1530 Z-COOL GSB 2220 Z-COOL GSB 2220 Z-COOL GSB 3030 Z-COOL GSB 4530 Z-COOL GSB 4530 Z-COOL

15 x 30mm 15 x 30mm 15 x 30mm 22 x 20mm 22 x 20mm 30 x 30mm 45 x 30mm 45 x 30mm

50 80 150 50 80 80 36 150

36,000rpm 36,000rpm 36,000rpm 26,000rpm 26,000rpm 19,100rpm 12,700rpm 12,700rpm

36001057 36001058 36001059 36001060 36001061 36001062 36001063 36001064

42211188

GSB 6030 Z-COOL

60 x 30mm

80

9,500rpm

36001065

42211285

GSB 6030 Z-COOL

60 x 30mm

150

9,500rpm

36001066

Z-COOL

Sanding Bands – Ceramic • Fast stock removal, especially on stainless steel • Long tool life and cool grinding capabilities Specifications: • A: Ceramic • G: 36 – 120 • SF: Steel & stainless steel Product Code

Specification

Size

Grit

Max. Speed

Part Number

42206305 42206308 42207305 42207308 42207705 42207708 42207712 42209302 42209305 42209308 42209312 42210302 42210305 42210308 42210312 42211302 42211305 42211308

GSB1530 CO-COOL GSB1530 CO-COOL GSB2220 CO-COOL GSB2220 CO-COOL GSB2525 CO-COOL GSB2525 CO-COOL GSB2525 CO-COOL GSB3030 CO-COOL GSB3030 CO-COOL GSB3030 CO-COOL GSB3030 CO-COOL GSB4530 CO-COOL GSB4530 CO-COOL GSB4530 CO-COOL GSB4530 CO-COOL GSB6030 CO-COOL GSB6030 CO-COOL GSB6030 CO-COOL

15 x 30mm 15 x 30mm 22 x 20mm 22 x 20mm 25 x 25mm 25 x 25mm 25 x 25mm 30 x 30mm 30 x 30mm 30 x 30mm 30 x 30mm 45 x 30mm 45 x 30mm 45 x 30mm 45 x 30mm 60 x 30mm 60 x 30mm 60 x 30mm

60 80 60 80 60 80 120 36 60 80 120 36 60 80 120 36 60 80

36,000rpm 36,000rpm 26,000rpm 26,000rpm 22,900rpm 22,900rpm 22,900rpm 19,100rpm 19,100rpm 19,100rpm 19,100rpm 12,700rpm 12,700rpm 12,700rpm 12,700rpm 9,500rpm 9,500rpm 9,500rpm

60019913 60019914 60019916 60019917 60019919 60019920 60019921 60019922 60019923 60019924 60019925 60019926 60019927 60019928 60019929 60019930 60019931 60019932

1800 999 024 | atom.com.au | getit@atom.com.au

259


Spiral Band Holders, Sandblasting Equipment & Accessories

4

Spiral Band Holders

Sandblaster Cabinet – Small, 245ltr

• Abrasive spiral band is firmly clamped in place due to the design of the holder which expands during use

S302 Model: SB-420 Foot operated industrial blast gun Powder coated steel construction 2 side doors and front opening panel for easy access Built-in 240V motor vacuum and filter system at rear of sandblast cabinet Recommended to use 3 x 25kg abrasive grit Stands 1.67m high Inside cabinet dimensions: 1,200(l) x 600(w) x 340 – 750(h)mm • Capacity: approx. 245ltr Includes: • Gloves • Air regulator • Internal low-voltage light • Air industrial duty blast gun • Ceramic tips • Extra replacement shield and dust extraction • • • • • • • •

Product Code

Specification

Dimensions

Max. Speed

Spindle

Part Number

42100413 42100410 42100613 42100610 42100813 42100810 42101000 42102000 42103000 42104000 42105000 42106000 42106500 42107000 42107500 42108000 42109000 42109500 42110000 42110500 42111006 42112000 42113000

GK 0410/3 GK 0410/6 GK 0610/3 GK 0610/6 GK 0810/3 GK 0810/6 GK 1010/6 GK 1020/6 GK 1310/6 GK 1325/6 GK 1510/6 GK 1530/6 GK 1925/6 GK 2220/6 GK 2525/6 GK 3020/6 GK 3030/6 GK 3825/6 GK 4530/6 GK 5125/6 GK 6030/6 GK 7530/8 GK 10040/8

4 x 10mm 4 x 10mm 6 x 10mm 6 x 10mm 8 x 10mm 8 x 10mm 10 x 10mm 10 x 20mm 13 x 10mm 13 x 25mm 15 x 10mm 15 x 30mm 19 x 25mm 22 x 20mm 25 x 25mm 30 x 20mm 30 x 30mm 38 x 25mm 45 x 30mm 51 x 25mm 60 x 30mm 75 x 30mm 100 x 40mm

55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 55,000rpm 44,000rpm 44,000rpm 44,000rpm 44,000rpm 36,000rpm 36,000rpm 30,000rpm 26,000rpm 22,900rpm 19,100rpm 19,100rpm 15,900rpm 12,700rpm 11,200rpm 9,500rpm 7,600rpm 5,700rpm

3mm 6mm 3mm 6mm 3mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 8mm 8mm

60019892 60019893 60019894 60019895 60019896 60019897 60019898 60019899 60019900 60019901 60019902 60019903 60019904 60019905 60019906 60019907 88837060 60019908 60019909 60019910 60019911 60019912 36001068

Sandblasting Accessories • Consumables to suit 92188165/60021102

92188165

Sandblaster Cabinet – Large, 650ltr S305 • • • • • •

Model: SBC-990 Foot operated industrial blast gun Powder coated steel construction Gas struts with 2 x safety interlocks Built in 240V vacuum and filter system Inside cabinet dimensions: 1,175(l) x 885(w) x 625 – 845(h)mm • Capacity: approx. 650ltr Includes: • Gloves • Air regulator • Internal low-voltage light • Air industrial duty blast gun • Ceramic tips • Extra replacement shield 60021102

Sandblaster System – Portable, 38ltr • Working pressure: 60 – 125psi • Air delivery: 6 – 25cfm • Sand delivery: 27 – 90kg/hr (dependent on nozzle size) • Hose length: 3m • Includes regulator and 4 ceramic nozzle tips • Dimensions: 850(h) x 476(l) x 330(w)mm • Weight: 18kg • Capacity: 38ltr

60020378

60014671

Description

Part Number

Sandblaster Replacement Gun Replacement Ceramic Tip Set (4 Pack) Replacement Rubber Pad To Suit Gun

98889319 60012468 92318020 60012469

Sandblaster System – Portable, 90ltr 60021104

260

60014672

60014673

Product Code

Description

Part Number

S335 3SC0206 3SC0207 2SC0035 3SC0300 7SC5155

Gun & Hose Portable Sandblasting Kit Ceramic Nozzle – 6mm Ceramic Nozzle – 7mm Heavy Duty Gloves Sandblasting Gun Air Jet & Sleeve

60020378 60021104 60014670 60014671 60014672 60014673

• Working pressure: 60 – 125psi • Air delivery: 6 – 20cfm • Hose length: 2.5m • Capacity: 90ltr Includes: • Safety mask, thread tape and sand funnel • 4 x ceramic nozzle tips – 2.5, 3.2, 3.8 & 4.5mm

60021103

The little things, but not every thing. No matter what your thing, get it @ ATOM


Sandblasting Abrasives Sandblasting Abrasives – Garnet

4

CHOOSING YOUR Sandblasting Medium

• Suitable for all areas of surface preparation especially stainless steel, anti-magnetic steel and all specialty alloys • 24.5kg

When it comes to sandblasting, a wide variety of different bead sizes and materials are available for use. In order to help you decide, ATOM has created this easy reference guide for you to compare sizes to grit. It’s easy @ ATOM!

Abrasive Size Conversion Chart Product Code

Grit Size

Material

Part Number

S295 S296

20 – 40 Garnet Coarse 30 – 60 Garnet Medium

Garnet Garnet

79906928 60021105

Sandblasting Abrasive – Garnet • Blast cleaning abrasives are well suited to most fields of surface preparation industry • Suitable for building and structural steel, construction, maintenance, boat and shipyards, non-ferrous surfaces and stainless steel • Grit size: 30 – 60 • 25kg

91000036

Sandblasting Abrasive – Glass Beads S297 • Precise control for peening, cleaning, finishing, and deburring processes • Glass beads • Bead size: -300 + 106 • 24.5kg

60014674

Looking for more workshop machinery?

Grit Size (Microns) Minimum

Maximum

Grit Equivalent

1,400

2,300

10

660

1,350

20

360

815

30

240

560

45

165

400

60

100

300

80

60

200

100

50

165

120

40

140

150

25

115

180

20

100

220

25

85

240

Microns

Reference

841 Granulated Sugar 595 400

Coffee

297 250

Black Pepper

210

9

70

280

177

14

60

320

149

11

45

400

9

35

600

2

23

1,000

125 105 88

Table Salt Powdered Sugar Human Hair

*Not to scale

Bead Hardness Whilst grit makes a big difference in sandblasting applications, so does the material you choose. Different materials will give you different finishes and some can even speed up the time taken to remove the surface of your working material. Soft Abrasives such as walnut and plastic have little ability to indent the underlying surface of your sandblasting material. These abrasives are mostly used for removing the surface of soft materials where you do not want to damage the underlying surface. Medium Abrasives such as glass and sand are suitable for removing the top layer of a surface and often leave a smooth finish behind. These abrasives are used for general purpose sandblasting and will suit most applications. Hard Abrasives such as garnet are suitable for removing the top layer of hard surfaces. Due to their hardness and often rigid finish, these beads will heavily mark softer surfaces and are not suitable for finishing applications.

Get ‘em from page 544 Can’t find the beads you’re looking for? ATOM is able to supply all the little things you need, even sandblasting abrasives, so give us a call and we’ll help you out!

1800 999 024 | atom.com.au | getit@atom.com.au

261

Profile for ATOM

Cutting & Abrasives | ATOM  

ATOM has an extensive range of cutting and abrasive products. However, we couldn't fit them all in here, if you need something that's not in...

Cutting & Abrasives | ATOM  

ATOM has an extensive range of cutting and abrasive products. However, we couldn't fit them all in here, if you need something that's not in...