Page 194

WELD1212 GMAW Level II A study of the Gas Metal Arc Welding (MIG) process. This course covers GMAW equipment settings, shielding gases, filler metals, and groove welding in the 1G, 2G, 3G, and 4G positions. 2 Credits. WELD1222 FCAW Level I A study of the Flux Cored Arc Welding process. This course covers shop safety, setup of FCAW equipment, joint design, shielding gas, filler metal, and fillet welds in the 2F, 3F, and 4F positions. 2 Credits. WELD1232 FCAW Level II A study of the Flux Core Arc Welding (FCAW) process. This course covers FCAW equipment, shielding gasses, filler metals and groove welding in 1G, 2G, 3, AND 4G positions. 2 Credits. WELD1302 SMAW Level I A study of the Shielded Metal Arc Welding (Stick) process. This course covers shop safety, setup of SMAW equipment, joint design, and fillet welds in the 2F, 3F, and 4F positions. 2 Credits. WELD1303 Introduction to SMAW A study of Shielded Metal Arc Welding. This course will cover shop safety, set up and operation of equipment, and weld joints and positions. Upon completion of this course students should be able to set up SMAW equipment and produce welds on carbon steel in all positions in accordance with AWS entry level welder standards. 3 Credits. WELD1312 SMAW Level II A study of the Shielded Metal Arc Welding (Stick) process. This course covers SMAW equipment settings, filler metals and groove welding in the 1G, 2G, 3G, and 4G positions. 2 Credits. WELD1402 GTAW Level I A study of the Gas Tungsten Arc Welding (TIG) process. This course covers shop safety, set up and operation of GTAW equipment, weld joints, electrode selection, and welding of filler welds in the 2F, 3F and 4F positions. 2 Credits. WELD1403 GTAW Welding A study of Gas Tungsten Arc Welding (GTAW). This course covers welds made using the GTAW (TIG) process, weld joints and positions, set up and operation of welding equipment, and shop safety. Carbon steel, Stainless Steel, and Aluminum welding will be covered. 3 Credits. WELD1412 GTAW Level II A study of the Gas Tungsten Arc Welding (TIG) process. This course covers machine controls, electrode selection, filler metal selection, and groove welding in the 1G, 2G, 3G, and 4G positions. 2 Credits.

193

ASU-Newport Catalog 2016 - 2017  
ASU-Newport Catalog 2016 - 2017