Issuu on Google+

SWIVEL™

D-SHACKLE™

BASIC SERIES

R

m STRUDYNA.com

V2.0


“Connecting structures”

ADJUSTABLE FORK™

Basic

Aesthetic

Confidence

Language of Stainless Steel Environmental, Aesthetic, Confidence.


Stainless Steel

Environmental

Stainless steel is an essence in the language of contemporary design. Through its structural resistance and aesthetic beauty, stainless steel speaks with unsurpassed confidence to its surrounding. At Strudyna, we speak the language of stainless steel. Combining casting and machining of different grades of stainless steel, we have provided a secure platform for many sectors of industry for over three decades. Striving in working ever more closely with our market, we spirit ourselves in challenging new production and design limits.


Stainless steel Stainless steels are usually classified into five groups: Austenitic, Ferritic, Martensitic, Duplex (combination of Ferritic and Austenitic), and finally Precipitation-hardening. Austenitic stainless steels contain 16-21% Chromium, 8-14% Nickel and other elements. This stainless group has a face-centered cubic structure and can be hardened by cold working, but not by heat treatment. In the annealed state, all are essentially non magnetic, but slight magnetism does form through cold forming. Austenitic stainless are excellent corrosion resistant, usually good formability and increases in strength as a result of cold forming. Type 316 is the mostly widely accepted grade with a balance performance while type 304 is the cheaper cousin with lower corrosion resistance. Ferritic stainless steels contain 10,5-30% Chromium, not over 0,1% of Carbon and other elements. This stainless group has a body-centered cubic crystal structure and is magnetic with good ductility and fair resistance to corrosion or oxidation. Ferritic stainless performs poorly in both high and low temperatures compared to Austenitic grades. Typical ferric grades include type 405, 408, 409. Martensitic stainless steels contain 12-14% Chromium, 0,2-1% Molybdenum and higher carbon content between 0,1-1,2% Carbon. The high Carbon content gives these Martensitic stainless a higher tensile but also makes them more brittle. This stainless group has a distorted body-centered cubic crystal structure and is usually quenched and magnetic. Typical Martensitic grades include type 410, 416, 420, 430 and 440. Duplex stainless steels contain high Chromium levels between 19-28%, up to 5% Molybdenum but lower Nickel than Austenitic grades. This stainless group has a mixture of Austenitic face-centered and Ferritic body-centered cubic structures. Most duplex alloys are typically designed with equal parts of austenite and ferrite, but some commercial alloy may be 60% austenite to 40% ferrite. Duplex grade stainless typically posses higher strength over Austenitic grade, and has an improved characteristic in localized pitting/cracking or crevice corrosion. Precipitated hardening stainless steel contains 17% Chromium and 4% Nickel. This grade of stainless steel uses elements such as aluminum, copper or titanium to precipitate harden their structure. These may result in either Austenitic or Martensitic annealed conditions. Austenitic conditions can be solution-treated to become Martensitic with sub zero temperature. Also commonly referred to as PH17-4 and type 630, this grade of stainless has a comparable corrosion resistance to Austenitic grades, but can posses even higher strength than Martensitic grade when solution treated.

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Material composition (AISI standards) Description

C%

Standard material 304 of Casting (CF-8) Standard material 304 of Non-Casting (304) Standard material 316 of Casting (CF-8M) Standard material 316 of Non-Casting (316) (316 6)

0.08 0.08 0.08 0.08

Chemical Composition Cr% Mo% 18.00-21.00 18.00-20.00 2.00-3.00 18.00-21.00 16.00-18.00 2.00-3.00

Ni% 8.00-11.00 8.00-11.00 9.00-12.00 10.00-14.00

en examined examined with spectra analysis for f r their chemical compositions fo co omp and tested under internal lab settings of Note : All casting sections of this catalog have been temperature 25 C Âą3 C, humidity 45% Âą10% 0% . Non-casting sections are certified by their respec respective ctive suppliers.

68 % Chromium

99.8 % Nickel

60-63 % Molybdenum

Comparison chart of major international nternational standards USA AISI

Japan JIS

Great Britain B.S.

CF-8 304 CF-8M 316

SCS 13 SUS 304 SCS 14 SUS 316

304 C 15 304 S 15 316 C 16 316 S 31

Germany DIN GX5 CrNi 19-10 X5 CrNi 18-10 GX5 CrNiMo 19-11-2 X5 CrNiMo 17-12-2

EN / DIN W.-Nr 1.4308 1.4301 1.4408 1.4401

Note : This comparison chart matches the closest relative standards of major international standards. Each international standard may still differ slightly.

4


Load testing Load Characteristics depend greatly on each production method, minimum designed cross section area, material grade, and testing setup. In this section we will cover the fundamentals of load testing setup. Safety working load is different in each geographical area. However, it is strongly recommended to designing your working load not over one quarter (1/4) of the breaking load listed in this catalog as a common and proper safety ratio. Proof loading is a tensile loading procedure prior to the actual use of the product. Since stainless modulus of elasticity is relatively high to that of galvanized steel, (hence giving its unique elongation and warning sign) it is recommended to proof load at 1.8 times of recommended safety working load. Load Class types indicate how each breaking load testing profile is setup and carried within this catalog. The class type are indicated with a (1) sign next to the B.L (1) sign on the Item menu bar (see page XVII). Principal testing profile setup stipulates the following conditions: 1) All items are checked prior to testing against distorted, worn or damaged parts including threads. 2) All items must be fully locked and tighten before testing. 3) Testing is done in room temperature settings. 4) Testing profile is setup in a vertical and undistorted alignment against applied loads. 5) 90% of loading area is covered by the loading tool. 6) Loads are applied in a consistent rate of 2MPa/sec. 7) No shock loading is applied.

Double rolled swaged cable load ends.

class 11

Double Nylon strap load ends.

class 16

Nylon strap load end vs. internal threaded load end.

class 7

Double threaded internal threaded load ends

class 12

Circular load end vs. nylon strap load end.

class 17

Double Nylon rope load ends.

Double horizontal flat load ends.

class 8

Circular load end vs. external threaded load end.

class 13

Nylon strap load end vs. external threaded load end.

class 4

Circular load end vs. rolled swaged cable load end.

class 9

Horizontal flat load end vs. external threaded load end.

class 14

Circular load end vs. flat screwed load end.

class 18

class 19

Flat screwed load end vs. nylon rope load end.

Circular load end vs. nylon rope load end.

class 5

Horizontal flat load end vs. rolled swaged cable load end.

class 10

Hand swaged load end vs. external threaded load end.

Š Copyright 2010 by Strudyna Thailand

class 6

Double circular load ends.

class 3

class 15

Circular load end vs. internal threaded load end.

class 20

Double internal threaded load ends.

5

SERIES

Circular load end vs. horizontal flat load end.

class 2

BASIC

class 1


Stainless steel fabrication Sinox basic’s stainless steel production strength focuses on five principal processes of stainless steel: Casting, Forging, Press forming, Welding and Surface treatments.

>

Casting utilizes the free shape forming of wax injection followed by five layers of ceramic shell made of silicon mallet sand. Each different grade of ceramic layer is thoroughly covered and dried before the next layer is carefully added. When all layers are formed securely, the wax inside the ceramic is removed using steam, heat and pressure. The ceramic shells are then heated up to 900 degree Celsius before molten stainless steel is poured for product to take shape. Advantage of lost wax casting over their forged or press formed counterparts is that the items can be formed to any desired shape. However, due to the nature of the lost wax casting process, lost wax products provide less strength compared to their forged or machined counterparts.

>

Forging utilizes the principal of heating stainless steel to a soft state of 1020 Celsius before compression force is applied for a forming process. Advantages of forging components are its strength. The molecules are highly compacted to form very high-strength components. The disadvantages of forging components are the limited forms and shapes as well as high molding costs.

>Press forming is the process by which SS sheets are compressed (cut) or formed (bent) by means of a press machine. This form of manufacturing can be very economical as form sheets can be bent into any desired shape. However, the disadvantages are the limited thickness as well as high molding cost. A variety of after-forming processes, including welding and assembly can be added to complete an end product.

>Welding in stainless steel is more critical than normal steel.

In order to protect contaminating the exposed surface of heated stainless steel, a protective layer of pure Argon gas is applied. Further fillers may be added to extend the strength of the desired products. The two most common welding processes are TIG and MIG welding. MIG uses a higher temperature and thus results in a stronger and more expensive weld.

>Surface finish

6

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

is one of the most critical areas of production; it will determine how end users perceive the value of the product as well as its corrosion resistance property. The following is a selection of major surface finishes used in this catalog : Mirror finish involves several layers of fine grinding and waxing to arrive at a mirror exterior. Due to the fine finish, it is the least susceptible to tea stain forming. However, due to the detailing required, it is also the most expensive surface finishing of all. Machine finish is turned (cut) on a Lathe. This results in a very uniform, lined finish and thus has a very mechanical look to it. Most architectural projects choose it for aesthetic effects. Matte finish is the cheap cousin of machined finish. It uses a satin grade of 800 rollers to polish; it provides a non-reflective surface similar to Machine finish, but is much cheaper to do.

Electro polished finish uses electricity in a tank of chemicals. Similar to a wet battery setup, the outer layer of molecules of the stainless steel product is pealed away exposing the Chromium molecules resulting in a shining and corrosion-resistance finish.

>

Passivation is the process of making a material "passive" in relation to other contaminants. In stainless steel, this is achieved by rinsing with diluted solution of nitric acid and peroxide alternating with deionized water. The nitric acid and peroxide oxidizes dissolve any impurities on the exposed surface of the stainless steel, and deionized water rinses away acid and oxidized impurities. This process adds an extra layer of protection to stainless steels surfaces.


Mechanical and physical properties of AISI316 and AISI304 Mechanical properties ambient temperature (Longitudinal samples) Hardness HB 30

0,2% Yield Stress

1% Yield Stress

Tensile Strength, min

Elongation after fracture

Impact value (ISO-V)

AISI

[HRB]

MPa

MPa

MPa

min%

J

CF-8 304, 304H CF-8M 316

80-88 215 80-88 215

175 205 185 205

225 235

485 515 485 515

35 40 30 40

60 100/60 60 1) 100/60

1)

Note : Refer to page IV for more detail of Load testing.

Mechanical properties above ambient temperature Mean thermal expansion coefficient between 20°C and -6 -1 ( 10 K ) AISI

100 °C

200 °C

300 °C

400 °C

500 °C

600 °C

700 °C

CF-8

16.8

-

17.9

-

18.6

-

-

304, 304H

16.0

16.5

17.0

17.5

18.0

18.5

18.5

CF-8M

15.8

-

17.0

-

17.7

-

-

316

16.0

16.5

17.0

17.5

18.0

19.0

19.5

Note : Maximum safety working temperature of all stainless steel product is 300 °C.

Physical properties Specific

Heat

Electric

Modulus of

Density

heat

conduction

resistance

elasticity

( 20 °C )

( 20 °C )

( 20 °C )

( 20 °C )

( 20 °C )

AISI

kg dm

kg g.K

W K.m

Mm m

kN/mm

CF-8 304, 304H CF-8M 316

7.88 7.90 7.90 8.00

0.53 0.50 0.53 0.50

15 15 15 15

0.73 0.75

200 200

Magnetizable

2 2 1)

Remark : 1= Shielded arc welding; MIG-welding; WIG-welding (Argon-arc). 1)

Austenitic steel can be slightly magnetism when quenched. Their magnetism may increase with increased cold forming.

1 kg 1MPa

=

=

9.81N 1 N/mm2

1N 1 Pa

= =

0.1019kg 1N/m2

Imperial to Metric conversion of common units 1 Lb

=

4.45N

1 Kip

=

4.45kN

1 foot

= = =

0.305m

1 inch

= = =

25.4m

1 ft2 1 psi

2

2

0.0929m

1 in.

6890 Pa

1 ksi

645mm2 6.89MPa

BASIC

Force and tensile strength conversions

7

SERIES

© Copyright 2010 by Strudyna Thailand

Yes No 1) Yes No


Maintenance of stainless steel Stainless steel is essentially a low carbon steel which contains Chromium at 1% or more by weight. It is this addition of Chromium that gives the steel its unique stainless, corrosion-resisting property, the most important stainless steel feature. The corrosion resistance and other useful properties of the steel such as formability and strength, to name just two, are enhanced by increased Chromium content and the addition of other elements, like Molybdenum, Nickel and/or Nitrogen. However, the aesthetic and hygienic surface appearance of stainless steel products can not be regarded as completely maintenance-free. In addition, to achieve maximum corrosion resistance, the surface of the stainless steel must be kept clean. Keeping its good looks and its long life depends on how regularly and how well it is cleaned. Surface contamination and the formation of deposits are critical factors in reducing its shiny life. These contaminants may be minute particles of iron or rust from other non-stainless steels used in nearby construction or welding sparks that were never removed. Industrial, commercial and even indoor naturally occurring atmospheric conditions can all result in corrosive deposits over extended periods of time. These deposits include cleaning chemicals such as chlorine, fuel as oil vapor, dust, or even salt from the sea. Other more aggressive conditions including high humidity indoor swimming pools or salt maintained snow roads can increase the speed of corrosion and therefore require more frequent maintenance. Routine, simple and gentle cleaning will reward the owner with a product which retains its properties and appearance for years to come. The frequency and cost of cleaning materials for stainless steel are lower than for many other materials so this will often out-weigh higher acquisition costs.

Maintenance Program The common rule for keeping stainless steel in its original, pristine condition is : "clean it when it is dirty". For regular cleaning, just use ordinary soap, or a mild, diluted detergent, or diluted ammonia in warm water ; apply with a soft cloth or synthetic sponge. Rinse well, dry with a soft cloth or drip dry. Occasionally the use of a mild household cleaner, a fine synthetic scourer or a brush with nylon bristles may be used. Regular cleaning will often remove heavy soiling and accumulated staining.

8

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Suggestions: • Routine, simple and gentle cleaning • Use only the above mentioned cleaning products • Employ repeated routine cleaning rather than an aggressive single one completely

Suggest not to do: • Use coarse abrasive powders • Use metallic scourers • Use "Silver Cleaners" • Subject stainless steel to "abnormal" use Caution and warning All products require regular inspection from trained professionals of each respective country in use. This process may not be skipped as products are effected by wear, tear, overloading or improper installation. Proper installation check list. Check proper selection of material, product and size to match your use and environment Check all your base structure and fittings are not damaged prior to installation Check all pins and screws are in full in position after installation Check installation 2 weeks after initial installation and regularly afterwards for any loosening or damage


Production tolerance guidelines for this catalog

ISO 2768

0.5-6

6-30

30-120

120-400

400-1000

1000-4000

General Casting product tolerance (mm)

g

±0.3

±0.5

±0.8

±1.2

±2.0

±3.0

General Machining product tolerance (mm)

m

±0.1

±0.2

±0.3

±0.5

±0.8

±1.2

Standard

Note : Production follows the above guidelines. However, product goes through constant upgrade, Check with manufacture for the latest product specs and tolerances.

Imperial thread to Metric (mm) conversion by group Inch thread 1" 1/2" 1/4" 3/4" 1/8" 3/8" 5/8" 7/8"

(mm) 25.400 12.700 6.350 19.050 3.175 9.525 15.875 22.225

Inch thread (mm)

Inch thread (mm) 4.763 3/16" 7.938 5/16" 11.113 7/16" 14.288 9/16" 17.463 11/16" 20.813 13/16" 23.813 15/16" 3.969 5/32"

7/32" 9/32" 11/32" 13/32" 11/2" 11/4" 11/8" 13/8"

5.556 7.144 8.731 10.319 38.100 31.750 28.575 34.925

Imperial thread to Metric (mm) conversion by size Inch thread 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32"

(mm) 3.175 3.969 4.763 5.556 6.350 7.144 7.938 8.731

Inch thread (mm) 9.525 3/8" 10.319 13/32" 11.113 7/16" 12.700 1/2" 14.288 9/16" 15.875 5/8" 17.463 11/16" 19.050 3/4"

Inch thread (mm) 13/16" 20.813 7/8" 22.225 15/16" 23.813 1" 25.400 11/8" 28.575 31.750 11/4" 34.925 13/8" 38.100 11/2"

Certificate no :

Certificate

Issued date: Till Dec 31, 2009 or further notice

Date of validity: Recipient :

STRUCTURAL DYNAMICS

Email : Tel :

DEFORMATION LOAD AND MATERIAL CERTIFICATE

Item :

Certification Scope :

a) Invoice no. b) Invoice date c) Product order no.

SAMPLE Class A

type :

This certificate certifies the deformation load of stainless steel products as per stated in the table below and material of casting and non-casting sections conform to the following chemical composition table.

DEFORMATION LOAD No.

Item

1

SPD01/4L/A-160MM*160MM*40MM

Deformation Load (N.)

Description

2

SPD01/4L/A-200MM*200MM*48MM

3

SPD01/4L/A-250MM*250MM*50MM

Negative Windload (Compression)

Dead Load (Ten sion)

2,000

1,500

3,000

2,000

4,000

2,500

SPD01/4L/A SPYDER 4 LEGS SPD01/4L/A SPYDER 4 LEGS SPD01/4L/A SPYDER 4 LEGS

Procedure and setup of this Spyder Te sting are performed under KZ SDI-QCSP standards. Proper safety coefficient must be applied by the intended users.

NOTE:

MATERIAL COMPOSITION Chemical Composition

Part of Products

NOTE:

C% 0.08 0.08 0.08 0.08

Cr% 18.00-21.00 18.00-20.00 18.00-21.00 16.00-18.00

Mo% 2.00-3.00 2.00-3.00

Ni% 8.00 -11.00 8.00 -10.50 9.00 -12.00 10.00-14.00

Casting sections have been examined with spectra-analysis for their chemical composition and tested under internal lab settings of temperature 25 3 , humidity 45% ±10% by a competent person. Non-casting sections are certified by their respective suppliers.

COMPARISON CHART OF MAJOR INTERNATIONAL STANDARDS USA AISI

Japan JIS

Great Britain B.S.

Germany DIN

Germany W.-Nr

CF-8

SCS 13

304 C 15

GX5 CrNi19-10

1.4308

304

SUS 304

304 S 31

X5CrNi 18-10

1.4301

CF-8M 316

SCS 14 SUS 316

316 C 16 316 S 13

GX5 CrNiMo 19-11-2 X5 CrNiMo 17-12-2

1.4408 1.4401

Signature Quality Manager Recipients of this certificate is obliged to notify any change of contacting details for as long as this certificate remains valid. This certificate will cease validity should the recipient fails to update new contacting details within two weeks of change. To update new contact details pleases contact us at qa@kinzi.com All information contained in this document and any attachment thereof are intended for the named recipient only and may contain confidential and/or privileged material. All contents of this document, including any attachment thereof are subject to copyright and may not be distributed or duplicated partially or in whole without prior written consent.

Kinzi (Thailand) Co.,Ltd. 45/1 Moo2 Nongpho Photharam Ratchaburi 70120 Thailand Tel: +66 (32) 351046 Fax: +66 (32) 389250, 340447 Email: info@kinzi.com Customer Service Dept. (English) Tel: +66 (9) 8366581, 8365943 Fax: +66 (32) 389250, 351048 www.kinzi.com

BASIC

Certificate for the following Class B) actual product breaking load report criteria can be supplied with ‘’ C) actual chemical composition report a fee. ‘’ D) actual product batch traceability ‘’ E) actual product x - ray report ‘’ F) actual metallic crystallization ‘’ G) third party certification

Standard material 304 of Casting (CF-8) Standard material 304 of Non-Casting (304) Standard material 316 of Casting (CF-8M) Standard material 316 of Non-Casting (316)

9

SERIES

Class A certificate certifies design load as well as material grade and is provided free of charge. Send your request with the following information:

© Copyright 2010 by Strudyna Thailand

Class A and other Certificates


Picture index Group A S360

Item no.

Shackles & Swivels

S360CP, SF360CP S360LK, SF360LK S360B, SF360B S360C, SF360C S360

Size

(mm/inch)

4-9

Page 20

S360CP, SF360CP 3-32, 4-16 S360LK, SF360LKF 4-12, 5-12

S360CI

S361

S370

S3611

S361R

S370CP, SF370CP

S3611BB

SF361R

S371LK

S2711

S361RF

S2711BB

SF361RF

S360B, SF360B

4-25, 8-16

S360C, SF360C

4-25, 8-16

S360CI

6-12

S3611

3/16"-1"

S3611BB

3/16"-1"

S2711

3/16"-1"

S2711BB

3/16"-1"

S361

4-8

S361R

5-8

SF361R

4-8

S361RF

5-8

SF361RF

4-8

S370B, SF370B S370C, SF370C S370

4-8

21

22

23

24

S370CP, SF370CP 3-32, 4-16

S362

S360BWN

10

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S380

SFP3606

S0182

S362CP

S360WO

S380CP

SFP3606

S0182

S362LK

S365LK

S380LK

S018

S0182-0840N

S362B

S365DLK

SF3606

S0181

S3062/E1

S362C

S364LK

S3607

S0181

S3062/E2

S371LK

5-12

S370B, SF370B

4-25, 8-16

S370C, SF370C

4-25, 8-16

S362

4-12

S362CP

4-8

S362LK

4-12

S362B

4-12

S362C

4-12

S360BWN

9-12

S360WO

5-12

S365LK

5-8

S365DLK

5-8

S364LK

6-12

S380

4-8

S380CP

4-12

S380LK

6-8

SF3606

32*100

S3607

4.5*56, 7*87

SFP3606

32*100 (Blue)

SFP3606

32*100 (White)

S018

4-25

S0181

6-19

S0181I

6-19

S0182

6-19

S0182I

6-19

S0182-0840N

8

S3062/E1

8, 5/16"UNF

S3062/E2

8, 5/16"UNF

25 26

27 27 28

29

30

31

32

33


Group B S260

Item no.

Wire ropes & Thimbles S261

SF511

SF512

S7350, SF7350 S260

Size

Page

1.5-25.0

34

(mm/inch)

S261

2-32

SF511

2-8

SF512

2-8

35

S7350, SF7350 3.5-12, 4-8

Group C S323H

S331X

S161,162,163

S2470

SF24302B

S247A

S661

SF414

SWR 1x19

S2343

SWR 7x7

S2344

SWR 7x19

S4322

S231, 232, 245

S2471

SF24301

S247H

S325

S2511

S2432

SF2431

SF24301B

SF878

6,10

SF234U

2-25

SF414

3-16"-1"

S2343

6-25

S2344

2-25

S10

5-25

S661

3/16"- 3/4"

SWR 1x19

2.5-12.0

SWR 7x7

2.0-12.0, 1/8"- 5/16"

SWR 7x19

2.0-12.0, 1/8"- 5/16"

Item no.

Hooks & Snaps S330

S7360

S325X

S225

S2311

SF2431X

SF2430

S331

S225SQ

S461

SF24302

SF2430B

36

37 38 39

Size

Page

S323H

1/4"-5/8"

40

S330

1/4"-1/2"

S325

1/4"-1/2"

S325X

1/4"-1/2"

S331

1/4"-1/2"

S331X

1/4"-1/2"

S4322

1/4"-1/2"

S2511

1", 1.1/4"

S225

3/8"-1.1/4"

S225SQ

1"*3.1/8"

S161, 162, 163

3.1/2, 4", 4.3/4"

S231, 232, 245

3.1/2, 4.1/4, 5"

S2432

19

S2311

19, 28

S461

90

S2470

32-100

S2471

50-90

SF2431

6-12

SF2431X

6-12

SF24302

6-12

SF24302B

6-12

SF24301

6-12

SF24301B

6-12

SF2430

6-12

SF2430B

6-12

(mm/inch)

S2450, SF2450 S2450X, SF2450X S247A

6

S247H

6

SF878

6, 8

S2450, SF2450

5-10

41

42

43

© Copyright 2010 by Strudyna Thailand

S10

SF234U

44

45

46

S2490

S2490X

S369

S369X

S249

S2490

9

S2490X

9

S369

11

S369X

11

S249

0-3

47

48

BASIC

S2450X, SF2450X 4-13, 5-10

11

SERIES

S7360


Group C S251

S3142, S333

Hooks & Snaps S830

S3143, S334

S840

SF268

S5014

SF875

S5013

SF880

Item no.

Size (mm/inch)

S251

0-3

S830

3/8"-3/4"

S840

1/2"

S5014

1"

S5013

1/2"-5/8"

Page

48

49

S3142, S333 7/8"x4",1"x5" S3143, S334 1.1/8"*4",1.1/8"x5"

SFU

Group D S311EE

S311NHH

SF312PHE

12

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

SF3127P

S3121P, SF3121P

SF312P/MIN

SFJ

SFH

Terminals & Turnbuckles S311HE

S311JE

SF312PHH

S3125/7

S3121/5

SF3121P/MIN

S311HH

S311JJ

SF312PJE

S312/5

S312P/4

SF3122P/MIN

S311NEE

S312

SF312P

S3125

S3125P/4

SF3122P

S311NHE

SF312PEE

SF312/7

SF3121/7

S3400

SF3122PK

SF268

Ø2-Ø10

SF875

Ø4-Ø12

SF880

Ø6

SFU

Ø6

SFJ

Ø6

SFH

Ø6, Ø9, Ø13

Item no.

Size (mm/inch)

S311EE

5-20, 3/16"-3/4"

S311HE

4-20, 3/16"-3/4"

S311HH

5-20, 3/16"-3/4"

S311NEE

4-20, 3/16"-3/4"

S311NHE

4-20, 3/16"-3/4"

S311NHH

4-20, 3/16"-3/4"

S311JE

5-20, 3/8"

S311JJ

5-20

S312

3/16" - 3/4"

SF312PEE

5-20

SF312PHE

5-20

SF312PHH

5-20

SF312PJE

5-20

SF312P

5-20

SF312/7

5-20

SF3127P

5-20

S3125/7

5-24

S312/5

5-20, 3/16"-5/8"

S3125

5-20

SF3121/7

5-20

50

51

Page

52

53

54

55

56

57

58

S3121P, SF3121P 10-1/2", 5-20, 2*M5-5/16"*M12 S3121/5

2.5-12, 3/32"- 5/16"

S312P/4

4-10

S3125P/4

4-10

S3400

5-20

59

60

SF312P/MIN 4-10 SF3121P/MIN 5-10 SF3122P/MIN 5-10

S311K

SF7801L, SF7801

SF7805/CH

S3121/5CH

SF3122P

5-20, 1/8"-1/2"

SF3122PK

6-20

S311K

5-20

61

SF7801L,SF7801 cable 2.5-3/8”,2*M5-5/16”

62

SF7805/CH

14-36

64

S3121/5CH

14*M24-36*M56


Group D SF312PBD

Terminals & Turnbuckles SF312PBD/MIN SF312PLBD/MIN

SF7802

SF78021/L, SF78021/R

Item no.

Size (mm/inch)

SF312PBD

M5-M24, 1/4"-3/4"UNC 65

SF312PBD/MIN

4-10

Page

SF312PLBD/MIN 4-10

SF78021N/L, SF78021N/R SF78021N/ /R

BF311EL, BF311ER

BF311NEL, BF311NER 311NER

BF311HL, BF311HR

BF311N/HL, BF311N/HR

SF7802

2-12, 3/32"-1/2"

SF78021/L, R

M5-M20

66

SF78021N/L, N/R M5-M20 BF311EL, ER

M4-M20, 3/16"-1/2"UNC 67

BF311NEL, NER M4-M20, 3/16"-1/2"UNC 68 BF311HL, HR

M4-M20, 3/16"-1/2"UNC 69

BF311NH/L, NH/R M4-M20, 3/16"-1/2"UNC 70

SF7803

BF312P/JL, BF312P/JR /JR

S7805, SF7805 F7 B3125L, B3125R

S811, S812

SF7803

2-16, 3/32"-3/8"UNC

71

BF312P/JL, /JR M5-M24 S7805, SF7805 2-10, 3/32"-3/8", 3-16 72

S811M, S812M

S813

S814, S814L

S814N, S814N/L S814N/

LTS, RTS

B3125L, R

M5-M20

S811, S812

3-10

73

S811M, S812M 3-10 S813

3-10

S814, S814L

3-10

74

S814N, S814N/L 3-10

SF126

SF3214

SF3202

SF3206

SF3251

S319LT, S3192 SF3192

SF3214H

SF3211

SF321

SF3250

SF319

SF308

SF3204

S3213

SF320

SF4900

S329

SF3215

SF3212

SF3201

SF3221

SF32501

SF318

SF3205

SF3212H

SF3216

Size (mm/inch)

SF317

3*10 - 13*160

76

SF3171

6*30 - 12*80

77

SF3250

3*15 - 10*100

78

SF4900

5*20 - 8*65

79

SF32501

5*45 - 8*50

SF3252

3*35 - 8*50

SF3251

5*45 - 8*60

SF319

3 - 12*200

S329

6*40 - 12*160

SF318

3-8

SF126

10*85 - 10*100

S319LT, S3192 SF3192

3-7, 6-12, 4-10

SF308

6*40

SF3215

5*8

SF3205

5*8

SF3214

5-8

SF3214H

5-8

SF3204

5-8

SF3212

5-10

SF3212H

5-10

SF3202

5-9

SF3211

5-8

S3213

1.1/2" - 2.3/8"

SF3201

5-8

SF3216 SF3206

5-8 5-8

SF321

5-8

SF320

5-8

SF3221

15*42-30*50

Page

80 81

© Copyright 2010 by Strudyna Thailand

SF3252

SF3171

Item no.

82

83

84

85

86 86

87

13

SERIES

SF317

Rings & Eye plates

5-20

BASIC

Group E

75

LTS, RTS


Group F S582

U-bolts & Eye bolts S3061

S80704

Item no.

S580

S306 Standard S582

Size (mm/inch)

6-36 , 1/4-1"

S3061

6-30 , 1/4-1"

S80704

8-12

S580

6-30, 1/4-1"

S306 Standard 6-24, 1/4-1" S306 Special

DIN444 SFDIN 444

S307

SFDIN 444FT

SF3191

DIN 315

SF3182

DIN 316

S3291

S80701

S4600

SF413

SF541, SF543, SF544, SF547, SF548, SF549

88 89 90

S306 Special

6-24, 1/4-1"

S307

6-24, 1/4"-1/2"

91

SF3191

5-16, 1/4"-1/2"

92

SF3182

4-12

93

S3291 DIN 444, SFDIN 444 SFDIN 444FT

5-12

94 95

DIN 316

10, 3/8", 5-24, 5/16"-3/4" 5-12 4-24, 3/16"-1" 5-24, 1/2-3/4

S80701

M16-M24

99

S31501

M8-M24

S4600

8-24

100

SF413

4-12

101

DIN 315

S31501

Page

97 98 98

SF541, SF543, 10 SF544, SF547, SF548, SF549

Group G SAB/APL

Balustrades SAB/T/APL

SAH/APL

Item no.

SF7806TR

SF7801/IR SF7801/IL

Size (mm)

SAB/APL

M5-M8

SAB/T/APL

M5-M8

SAH/APL

5.0-8.2

SF7806TR

M5-M8

Page

102

103

SF7801/IR, /IL Cable 3-6

Group H

14

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S2476

S2464, 2466, 2468

SF510

Snap shackles & Pelican hooks S2478

S2831

S510

S2482

S2831-I3, I4, I6, S2831I3, S2831I4

S24821

S890HP

Item no.

S2483

SF8282

Size (mm)

S2476

1, 2, 3

S2478

1, 2, 3

S2482

1, 2, 3

S24821

1, 2, 3

S2483

0, 1, 2, 3

S2464, 2466, 2468 52, 66, 96 S2831

3"- 6"

S2831-I3, I4, I6, S2831I3, S2831I4

Cable 3-6, 3-6, 4-8, 6-12 1/8"-5/32", 3/16"

S890HP

4", 6"

SF8282

3-10

SF510

7*18, 9.5*26, 15*34.5

S510

17*36, 19*36

Page

104

105 106 107 107


SF8252P

SF8257

SF8672H

S315

S3151

S3141NL/A

S3151NL/B

S212-H1-75

S313-E1

SF8258P

SF8253

SF8257P

S314

S315A

S3141NL

S3151NL/A

S314/H1

S212-E1-100

S313NL-E1

SF8241

SF8250

SF8253P

SF8671E

S314A

S315NL

S3151NL

S3141/B

S212-E1-50

S212-H1-100

S210-E1

SF8248

SF8250P

SF8256

SF8671H

S314NL

S315ANL

S3141/A

S3151/B

S212-H1-50

S212L-E1

S210-E2

SF8248P

SF8252

SF8256P

SF8672E

S314ANL

S3141

S3151/A

S3141NL/B

S212-E1-75

S212L-H1

S210-E3

Size (mm)

SF8190

19

SF8240

19

SF8241

19

SF8248

25

SF8248P

25

SF8258

25

SF8258P

25

SF8250

25

SF8250P

25

SF8252

25

SF8252P

25

SF8253

25

SF8253P

25

SF8256

25

SF8256P

25

SF8257

25

SF8257P

25

SF8671E

65

SF8671H

65

SF8672E

65

SF8672H

65

S314

25, 32, 50

S314A

25-50

S314NL

25-50

S314ANL

25-50

S315

25, 32, 50

S315A

25, 32, 50

S315NL

25, 32, 50

S315ANL

25, 32, 50

S3141

25, 32, 50

S3151

25, 32, 50

S3141NL

25, 32, 50

S3151NL

25, 32, 50

S3141/A

25, 32, 50

S3151/A

25, 32, 50

S3141NL/A

25, 32, 50

S3151NL/A

25, 32, 50

S3141/B

25, 32, 50

S3151/B

25, 32, 50

S3141NL/B

25, 32, 50

S3151NL/B

25, 32, 50

S314/H1

50

S212-E1-50

50

S212-H1-50

50

S212-E1-75

75

S212-H1-75

75

S212-E1-100

100

S212-H1-100

100

S212L-E1

75

S212L-H1

100

S313-E1

50, 75, 100

S313NL-E1

50

S210-E1

75, 100, 125

S210-E2

75, 100, 125

S210-E3

100

Page

108

109

110

111

112 © Copyright 2010 by Strudyna Thailand

SF8258

SF8240

Item no.

113

114

115

116

15

SERIES

SF8190

Blocks & Pulleys

BASIC

Group J


Group J S210-H1

S211-H2

Group K S4100

S505

SFG216018

S210-H2

S211-E1

S211-E2

S211-H1

S213-E1

S505H

SFG216017

S301

S506L, S506R

S507

S508

S4015

SFG216016

SFG216019

Page

(mm)

S210-H1

75, 100, 125

S210-H2

75, 100, 125

S211-E1

75, 100, 125

S211-E2

75, 100, 125

S211-H1

75, 100, 125

S211-H2

75, 100, 125

S213-E1

75, 100, 125, 150

Item no.

Anchors, Cleats & Rod holders S3230

Size

Item no.

Blocks & Pulleys

Size

(mm/inch)

S4100

1.5-10.0

S3230

200, 240

S301

4.5", 6", 8"

S506L, R

4.1/2", 6"

S4015

2.1/2", 4.1/2", 6"

S505

4"-12"

S505H

6"-7"

S507

4"-10"

S508

4"-15"

116 117

117

Page 118 119

120

SFG216016 Ø51

121

SFG216018 Ø51

121

SFG216017 Ø51 SFG216019 Ø51

Group L S9222R-3"

Hinges & Deck mounts S9222R-3.5"

S9222R-4"

S9224

S9224WS

Size

Item no.

(mm/inch)

S9222R-3"

3"

Page 122

16

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S9222R-3.5" 3.5"

S9224WL

S9225/HP

SF322

S5373

S9223

S9226/HP

SF323

S5341

S9223WS

S9227/HP

SF324

S5359

SF8340

S9228/HP

S9210

S391

SF8341

S322C

S9211

S392

S9222R-4"

4"

S9224

38

S9224WS

38

S9224WL

38

S9223

57 , 71

S9223WS

57 , 71

SF8340

3*31*12, 3*46*13, 3*61*15

SF8341

3*41*25, 3*56*35, 4*80*50

S9225/HP

4

S9226/HP

5

S9227/HP

4

S9228/HP

4

S322C

5

SF322

4-10

SF323

10-16

SF324

10-16

S9210

3"- 4"

S9211

3"

S5373

19

S5341

9

S5359

5,10

S391

1"

S392

1"

123

124

125

126


Group L

Hinges & Deck mounts S394

S393

S31614

S31614A

S316061A

Group M

S31612

S395

S31601

S31606

S31602

S31606A

S31612A

S316061

SF8345

SF3272

Parts & Replacements

SFHA/01

SFHA/03

SFHA/07

SFHA/08

SFHA/11

SF3900

SFHA/12

Item no.

Size (mm/inch)

S393

1"

L5

S394

1"

L6

S395

1"

S31601

1"- 1.3/16"

S31602

1"- 1.3/16"

S31614

7/8"

S31614A

7/8"

S31606

7/8"

S31606A

7/8"

S316061

7/8"

S316061A

7/8"

S31612

7/8"

S31612A

7/8"

SF8345

12*40*47*, 16*55*62.5

SF3272

50

Item no.

Size (mm/inch)

SFHA/01

5*128

SFHA/03

4.75*125

SFHA/07

4*110

SFHA/08

5*150

SFHA/11

12.7*28

131

SFHA/12

7.5*24

131

SF3900

3/16"*1/2"- 5/16"*1 1/2"

Page

L7

L8

Page 130

Logo Symbol description

Collared Pin

Material

>>

Usability >> Tools

>>

Packing

>>

Casting Sheave

Quick assembly

Allen key

Upset Forging

Light type

Eye

Swivel

Swivel

Light type

Š Copyright 2010 by Strudyna Thailand

F

Imperial

Hook Hook

Eye

Locking Pin

Collared Pin

Locking Pin

Casting Sheave

Removable Pin

Double

Plastic Nylon

Nylon Sheave

Plastic Nylon Plastic Nylon

Quick assembly

Removable Pin

Pin Pin

Double Casting Sheave

Double Casting Sheave

Pipe Pipe

Triple Casting Sheave

Triple Casting Sheave

Quick release Quick release

Allen key Piece per carton.

Wrench

Wrench

Screwdriver

P B C

Hammer

Screwdriver Hammer

Pliers

Pliers

Plastic Back Card.

17

SERIES

Product categories >>

Metric

BASIC

Measurement units >>


Reading information in this catalog This catalog has been designed with an effort to display technical information in a clear and easy to use matter. For further clarification, follow the following description: Menu Bar Organizes the technical information relevant to one single item. In this case S360 D-shackle. SF360 has the same appearance but are upset forged and thus considered a separate item. SF360 menu bar is thus created following the S360 list.

Item no. Shows the relevant items depicted in the item display. One item display may contain several Item codes if these items share same appearance but different manufacturing methods. Ex. S360 and SF360

Casting / Forging materials are always identified in technical data section. Materials are based in AISI grades with corresponding DIN grade shown. Some items may be available on both SS304 and SS316 material. Refer to menu bar for their respective order numbers.

Item display shows all relevant items presented in the same catalog page. Items are displayed side by side for easy identification of their differences. Product dimensions are labeled with blue arrows with their respective lettering. Check Menu bar for their respective dimensions. Dimension label “A” only appears on S360 but will represent all pin sizes for the all products in the same display. (ex. S360CP and S360LK)

Item no. are repeated in three areas of the page, 1) under each item’s display, 2) under each item’s menu bar and 3) above each technical data section.

Threading Logo appears in front of Item no. to easily identify the type of thread each item uses. is for metric thread and is for inch thread.

L

L A

A

B

B S360C, SF360C D-shackle (oval sink pin)

S360B,SF360B D-shackle (square head pin) Wrench

S360B, SF360B Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ : AISI316 - DIN 1.4401 Production : S360B Shackle - Cast Pin - See chart SF360B - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application D-shackles (square head pin) are designed for application where strong wrench tightening pins are required for a prolong use in a fix location.

item no.

S360B

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

4360-1004 4360-1005 4360-1006 4360-1007 4360-1008 4360-100 4360-1009 4360-101 4360-1010 4360-101 4360-1012 4360-101 4360-1013 4360-101 4360-1016 4360-101 4360-1019 4360-102 4360-1022 4360-102 4360-1025

6360-1004 6360-1005 6360-1006 6360-1007 6360-1008 6360-1009 6360-1010 6360-1012 6360-1013 6360-1016 6360-1019 6360-1022 6360-1025

4 5 6 7 8 9 10 12 13 16 19 22 25

4 5 6 7 8 9 10 12 13 16 19 22 25

8 10 12 14 16 18 20 24 26 32 38 44 50

16 20 24 28 32 36 40 48 52 64 76 88 100

Cast Cast Forged Forged Forged Forged Forged Forged Forged Forged Forged Cast Cast

item no.

SF360B S

SERIES

© Copyright 2010 by Strudyna Thailand

F F F F

BASIC

(1)

SS316

Pin

SS304

Material

Material

18

S360CI D-shackle (hexagonal sink pin)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2 2360-1008 2360-1010 2 2 2360-1012 2 2360-1016

8 10 12 16

8 10 12 16

16 20 24 32

32 40 48 64

B.L.

(kgs)

4,000 2,000 1,000 700 500 400 200 150 125 50 40 20 15

550 1,000 1,700 2,000 2,800 3,500 4,500 6,000 6,500 10,000 15,000 19,000 23,000 (1)

B.L. (kgs)

500 200 150 50

3,500 5,500 7,500 14,000

D-shackle (hexagonal sink pin)

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

Field of application gives a brief description of how items are used. For more information on each item’s application, go to www.strudyna.com.

Surface treatment identifies the surface finish of the item. Most common finishes are E.P. for electro polish, M.P. for Mirror polish, M.F. for matte /satin or hair line finish, S.B. for Sand blasting finish and M.A. for machined finish. Surface finish will be shown on the Menu bar should the item contain different finishes on different sizes within the same item. Production identifies both: major production part (ex. shackle base) and minor production part (ex. pin). Should the production be different between different sizes of the same item “see chart” will appear here. Please refer to the right hand chart under its respective menu bars.

Item size are always identified with an highlighted blue for easy identification. Production Process is shown in the menu bar when they differ on different sizes within the same item no. In this case the same Pins are forged or casted. Any other manufacturing process that is identical throughout the item no. will be shown in the technical data section.

PPC Logo or Pieces per carton logo identifies the quantity in pieces packed in a standard carton. B.L. stands for breaking load in kgs. The BL(1) shows the class of load type this items is setup and tested under. Please see page IV for further information. Please note recommended safe working load is ¼ of B.L.

item no. of SF360 displays and identify this menu bar’s main product. Upset forged logo or F is shown in front of order code should the item is produced with upset forging methods. SS316 order no. is the order number to use when ordering stainless material grade 316. SS316 order numbers are always in bold characters. SS304 order no. is the order number to use when ordering stainless material grade 304. Not all items (ex SF360) will come in both 304 and 316 material. SS304 order numbers are never in Bold characters.


Basic Assembly

SF3121P : Page 82. Pipe turnbuckle, jaw and swage stud

SF7801 : Page 62. Right threaded stud terminal

SF7803 : Page 71. Swage fork SF7802 : Page 66. Eye terminal

S311JJ : Page 54. Frame turnbuckle, jaw and jaw (metric thread)

SF234U : Page 36. Light thimbles

S311NHE : Page 53. Frame turnbuckle with nut, hook and eye

SF322 : Page 125. Wire eye strap

S260 : Page 34. Wire rope clip

S360 : Page 20. D-shackle

S812 : Page 73. Fork swageless terminal

S312P/4 : Page 59. Pipe turnbuckle, jaw and swageless terminal

S812 : Page 73. Fork swageless terminal

BASIC

SF3122P/MIN : Page 60. Mini pipe turnbuckle, swage terminal and swage terminal

19

SERIES

S811 : Page 73. Eye swageless terminal

Š Copyright 2010 by Strudyna Thailand

S311JJ : Page 54. Frame turnbuckle, jaw and jaw (metric thread)

SF7803 : Page 71. Swage fork


Shackles & Swivels L

A

B

B

A

item no.

S360 Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S360 - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

Casting material © Copyright 2010 by Strudyna Thailand

B (mm)

L (mm)

4360-0004 4360-0005 4360-0006 4360-0007 4360-0008 4360-0009

6360-0004 6360-0005 6360-0006 6360-0007 6360-0008 6360-0009

4 5 6 7 8 9

4 5 6 7 8 9

8 10 12 14 16 18

16 20 24 28 32 36

Material

S360CP, SF360CP

SERIES

ØA (mm)

item no.

Technical T h i l Data D

BASIC

SIZE (mm)

D-Shackles are designed for application where quick manual setup/release assembly pins are required.

Collared

20

SS316

Field of application

D-shackle

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S360CP Shackle - Cast Pin - See chart SF360CP Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

Pin process

-4360-0424 4360-4405 4360-2006 4360-2007 4360-5208 4360-5209 4360-0410 4360-0412 4360-0413 4360-0414 4360-0416 4360-0419 4360-0422 4360-0425 4360-0428 4360-0432

6360-0423 6360-0424 6360-4405 6360-2006 6360-2007 6360-5208 6360-5209 6360-0410 6360-0412 6360-0413 6360-0414 6360-0416 6360-0419 6360-0422 6360-0425 6360-0428 6360-0432

3 4 5 6 7 8 9 10 12 13 14 16 19 22 25 28 32

3 4 5 6 7 8 9 10 12 13 14 16 19 22 25 28 32

8 8 10 12 14 16 18 20 24 26 28 32 38 44 50 56 64

12 16 20 24 28 32 36 40 48 52 56 64 76 88 100 112 128

Forged Forged Forged Forged Forged Forged Forged Forged Forged Forged Cast Forged Forged Cast Forged Cast Cast

Material

F F F F F F F

Field of application D-Shackles (collared pin) are designed for application where a more secure tight pin is required.

item no. Material

S360LK, SF360LKF Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S360LK - Shackle - Cast Pin - Forged SF360LKF - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished) item no.

Field of application D-shackles (locking pin) are designed for application where accidental dropping of pin must be avoided during operation. ex. high sea enviroment or high tower/pole locations.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics.

Piece per carton.

P B C

S360CP SS304

item no.

Locking Pin

S360 SS304

Material

Technical Data

S360LK, SF360LKF (forged) D-shackle (locking pin)

S360CP, SF360CP D-shackle (collared pin)

S360 D-shackle

Material

F F F F F

SF360CP SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2360-0404 2360-0405 2360-0406 2360-0408 2360-0410 2360-0412 2360-0416

4 5 6 8 10 12 16

4 5 6 8 10 12 16

8 10 12 16 20 24 32

16 20 24 32 40 48 64

S360LK SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6360-5004 6360-5005 6360-5006 6360-5008 6360-5010 6360-5012

4 5 6 8 10 12

4.40 4.40 5.25 7.10 8.90 10.70

8 10 12 16 20 24

16 20 24 32 40 48

SF360LKF

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2360-5005 2360-5006 2360-5008 2360-5010 2360-5012

5 6 8 10 12

5.26 6.35 8.00 10.00 12.52

10 12 16 20 24

20 24 32 40 48

F

Upset Forging

3,000 2,000 1,000 600 500 250

550 1,000 1,700 2,000 2,800 3,500 P B C

4,000 3,000 2,000 1,000 600 400 300 200 100 125 100 50 40 20 15 10 8

3,000 1,500 1,000 500 250 125

SS316

Plastic Back Card.

(1)

B.L. (kgs)

1 1 1 2 2 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(1)

B.L. (kgs)

400 550 1,000 1,700 2,000 2,800 3,500 4,500 6,000 6,500 7,000 10,000 15,000 19,000 23,000 26,000 38,000 (1)

B.L. (kgs)

3,000 2,000 1,000 500 200 100 50

900 1,600 2,000 3,500 5,500 7,500 14,000

P B C

B.L. (kgs)

1 1 2 2 n/a n/a

800 1,000 1,400 2,800 4,000 6,200

(1)

(1)

B.L. (kgs)

3,000 1,500 1,000 500 250

1,500 2,200 3,800 4,800 8,000

* For more information on symbols, refer to page 17.


Shackles & Swivels L

L A

A

B

B S360C, SF360C D-shackle (oval sink pin)

Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ : AISI316 - DIN 1.4401 Production : S360B - Shackle - Cast Pin - See chart SF360B - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application D-shackles (square head pin) are designed for application where strong wrench tightening pins are required for a prolong use in a fix location.

S360B SS304

SS316

SIZE (mm)

4360-1004 4360-1005 4360-1006 4360-1007 4360-1008 4360-1009 4360-1010 4360-1012 4360-1013 4360-1016 4360-1019 4360-1022 4360-1025

6360-1004 6360-1005 6360-1006 6360-1007 6360-1008 6360-1009 6360-1010 6360-1012 6360-1013 6360-1016 6360-1019 6360-1022 6360-1025

4 5 6 7 8 9 10 12 13 16 19 22 25

Material

item no.

SF360B

Material

F F F F D-shackle (hexagonal sink pin)

item no.

S360C, SF360C

Screwdriver

Technical Data Casting material

: : Forging material : : Production :

AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 S360C - Shackle - Cast Pin - See chart SF360C - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Shackles (oval sink pin) are designed for application where a continues smooth and round side is required.

S360CI

item no.

Field of application Shackles (hexagonal sink pin) are designed for application in puplic places where direct malicious manual tampering may occure.

Note:

(1)

Standard safety factor for working load is 1/4 of breaking load.

Material

8 10 12 16

8 10 12 16

16 20 24 32

32 40 48 64

4 5 6 7 8 9 10 12 13 16 19 22 25

Forging material : AISI316 - DIN 1.4401 Production : S360CI - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

Cast Cast Forged Forged Forged Forged Forged Forged Forged Forged Forged Cast Cast

SS316

SS316

SF360C F F F F

16 20 24 28 32 36 40 48 52 64 76 88 100

2360-1008 2360-1010 2360-1012 2360-1016

6360-4004 6360-4005 6360-4006 6360-4007 6360-4008 6360-4009 6360-4010 6360-4012 6360-4013 6360-4016 6360-4019 6360-4022 6360-4025

Allen key

8 10 12 14 16 18 20 24 26 32 38 44 50

L (mm)

SS304

Technical Data

Pin

4 5 6 7 8 9 10 12 13 16 19 22 25

B.L.

B (mm)

4360-4004 4360-4005 4360-4006 4360-4007 4360-4008 4360-4009 4360-4010 4360-4012 4360-4013 4360-4016 4360-4019 4360-4022 4360-4025

Material

L (mm)

ØA (mm)

S360C

item no.

B (mm)

SIZE (mm)

SIZE (mm)

Material

(1)

ØA (mm)

(kgs)

4,000 2,000 1,000 700 500 400 200 150 125 50 40 20 15

550 1,000 1,700 2,000 2,800 3,500 4,500 6,000 6,500 10,000 15,000 19,000 23,000 (1)

B.L. (kgs)

500 200 150 50

3,500 5,500 7,500 14,000 (1)

ØA (mm)

B (mm)

L (mm)

Pin

4 5 6 7 8 9 10 12 13 16 19 22 25

8 10 12 14 16 18 20 24 26 32 38 44 50

16 20 24 28 32 36 40 48 52 64 76 88 100

Forged Forged Forged Forged Forged Forged Forged Forged Cast Forged Cast Cast Cast

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2360-4008 2360-4010 2360-4012 2360-4016

8 10 12 16

8 10 12 16

16 20 24 32

32 40 48 64

S360CI SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6360-5106 6360-5108 6360-5110 6360-5112

6 8 10 12

6 8 10 12

12 16 20 24

24 32 40 48

B.L. (kgs)

4,000 2,000 1,000 700 500 400 250 150 125 60 45 20 15

550 1,000 1,700 2,000 2,800 3,500 4,500 6,000 6,500 10,000 15,000 19,000 23,000 (1)

B.L. (kgs)

500 250 150 60

3,500 5,500 7,500 14,000 (1)

B.L. (kgs)

1,000 500 250 150

1,700 2,800 4,500 6,000

Refer to page IV - class 1 load characteristics

Piece per carton.

F

Upset Forging

© Copyright 2010 by Strudyna Thailand

item no.

* For more information on symbols, refer to page 17.

21

SERIES

Wrench

S360B, SF360B

S360CI D-shackle (hexagonal sink pin)

BASIC

S360B, SF360B D-shackle (square head pin)


Shackles & Swivels L

A

A

B

S3611BB Oversize D-shackle (nut and cotter pin)

S3611 Oversize D-shackle item no. Material Vibration resistant

Oversize

S3611, S3611BB Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "E.P. " (Electro polished) Production : S3611 - Shackle /Pin- Cast S3611BB - Shackle /Pin- Cast

Field of application Oversize D-shackles and Oversize D-shackles (nut and cotter pin) are designed for application where extra heavy loads are expected. The pins for oversize type are larger than standard D-shackles. Oversize cotter pin D-shackles are expected as well as secure cotter pin to avoid unexpected loosening by vibration or wind.

item no. Material

D-shackle

S3611 SS316

SIZE (inch)

テ連 (mm)

B (mm)

L (mm)

6361-1316 6361-1104 6361-1516 6361-1308 6361-1716 6361-1102 6361-1508 6361-1304 6361-1708 6361-1001

3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

6.25 7.80 9.40 11.00 12.50 15.70 19.00 22.20 25.40 28.50

9.52 11.90 13.50 15.90 20.60 20.60 27.00 30.20 38.10 41.30

22 26 30 37 44 50 60 70 85 97

SS316

SIZE (inch)

テ連 (mm)

B (mm)

L (mm)

6361-1913 6361-1214 6361-1251 6361-1238 6361-1271 6361-1212 6361-1258 6361-1234 6361-1278 6361-1201

3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

6.35 7.93 9.52 11.11 12.70 15.87 19.05 22.22 25.40 28.57

9.52 11.90 13.50 15.90 20.60 20.60 27.00 30.20 38.10 41.30

22 26 30 37 44 50 60 70 85 97

S3611BB

Vibration resistant

S2711, S2711BB

22

SERIES

BASIC

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S2711 - Shackle /Pin- Cast S2711BB - Shackle /Pin- Cast Surface treatment : "E.P. " (Electro polished)

Field of application Oversize anchor shackles are designed for application where multiple connecting links as well as strong load are expected. Pins for oversize type are larger than normal. Oversize anchor shackles (nut and cotter pin) are designed for application where multiple connecting links are required as well as a strong heavy load anti vibration pin which can withstand continues vibration from wind or movement.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

Piece per carton.

item no. Material

SS316

SIZE (inch)

テ連 (mm)

B (mm)

L (mm)

6271-3614 6271-1456 6271-5638 6271-3876 6271-7612 6271-1258 6271-5834 6271-3478 6271-7801 6271-0118

3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

6.25 7.80 9.40 11.00 12.50 15.70 19.00 22.20 25.40 28.50

9.52 11.90 13.50 15.90 20.60 20.60 27.00 30.20 38.10 41.30

25.40 31.00 36.50 42.00 49.20 55.60 68.30 84.10 100.00 112.70

SS316

SIZE (inch)

テ連 (mm)

B (mm)

L (mm)

6271-1973 6271-8516 6271-8308 6271-8716 6271-8102 6271-8508 6271-8304 6271-8708 6271-8001 6271-8118

3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"

6.35 7.93 9.52 11.11 12.70 15.87 19.05 22.22 25.40 28.57

9.52 11.90 13.50 15.90 20.60 20.60 27.00 30.20 38.10 41.30

25.40 31.00 36.50 42.00 49.20 55.60 68.30 84.10 100.00 112.70

S2711BB

(1)

B.L. (kgs)

1,000 500 300 200 125 80 45 25 15 12

1,250 2,400 4,100 4,900 7,300 9,900 13,000 18,000 20,000 23,000

B

B

Oversize

S2711

1,250 2,400 4,100 4,900 7,300 9,900 13,000 18,000 20,000 23,000

S2711BB Oversize anchor shackle (nut and cotter pin)

S2711 Oversize anchor shackle

Material

1,000 500 300 200 125 90 50 25 15 12

L

A

item no.

(1)

B.L. (kgs)

(1)

B.L. (kgs)

1,000 500 300 200 100 80 40 25 20 10

1,500 2,200 3,000 4,800 7,000 8,700 12,000 16,000 19,000 28,000 (1)

B.L. (kgs)

1,000 500 300 150 100 70 45 20 15 10

1,500 2,200 3,000 4,800 7,000 8,700 12,000 16,000 19,000 28,000

* For more information on symbols, refer to page 17.


Shackles & Swivels L A

B

S361 Light stamped shackle Quick assembly

S361

item no. Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : S361 - Shackle /Pin- Forged Surface treatment : "E.P. " (Electro polished)

Field of application

S361 SS304

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

4361-0004 4361-0005 4361-0006 4361-0008

4 5 6 8

4 5 6 8

10 12 15 23

19.6 23.5 27.5 48.0

(1)

B.L. (kgs)

4,000 2,000 1,400 350

600 950 1,600 2,600

Light stamped shackles are designed for very light applications where a simple no load tightening shackle is needed.

L A

L A

B

B SF361R Sheet shackle

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301 Sheet AISI316 - DIN 1.4401 Production : S361R - Shackle - Cast Pin- Forged : SF361R - Shackle - Sheet Pin- Forged Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Light D-shackles and Sheet shackles are designed for simple removable light jobs where load isn't a critical factor.

S361R SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6361-2005 6361-2006 6361-2008

5 6 8

5 6 8

12 13 18

31.2 37.0 46.5

SS304

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

1361-0004 1361-0005 1361-0006 1361-0008

4 5 6 8

4 5 6 8

10 11 14 18

24.5 30.7 37.0 49.0

SF361R

(1)

B.L. (kgs)

1,400 1,000 450

(1)

B.L. (kgs)

2,500 1,400 1,000 500

A

A

B

B S361RF Light D-shackle (flat screw pi pin)

S361RF, SF361RF

Technical Data Forging material : AISI304 - DIN 1.4301 Production : S361RF - Shackle - Cast Pin- Forged : SF361RF - Shackle - Sheet Pin- Forged Surface treatment : "E.P. " (Electro polished)

Field of application Light D-shackles and Sheet shackles (flat screw pin) are designed for permanent light jobs where load isn't a cirtical factor.

Note:

(1)

Standard safety factor for working load is 1/4 of breaking load.

item no. Material

item no. Material

600 1,000 1,600 2,800

L

L

Light type

950 1,500 2,600

© Copyright 2010 by Strudyna Thailand

S361R, SF361R

S361RF

SF361RF Sheet shackle (flat screw pin)

SS304

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

4361-3005 4361-3006 4361-3088

5 6 8

5 6 8

12 13 18

21.0 25.3 33.0

SS304

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

1361-0104 1361-0105 1361-0106 1361-0108

4 5 6 8

4 5 6 8

10 11 14 18

16 21 25 33

SF361RF

(1)

B.L. (kgs)

1,400 1,000 450

950 1,500 2,600 (1)

B.L. (kgs)

1,500 1,400 1,000 450

600 1,000 1,600 2,800

BASIC

item no. Light type

Refer to page IV - class 1 load characteristics

Piece per carton.

* For more information on symbols, refer to page 17.

23

SERIES

S361R Light D-shackle


Shackles & Swivels L

L

A B

B

A

item no.

S370

Quick assembly

S370 SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

6370-0004 6370-0005 6370-0006 6370-0008

4 5 6 8

4 5 6 8

8 10 12 16

20.00 25.50 30.00 41.00

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S370 - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

S371LK Anchor shackle (locking pin)

S370CP, SF370CP Anchor shackle (collared pin)

S370 Anchor shackle

(1)

B.L. (kgs)

2,000 1,200 800 400

550 1,000 1,700 2,800

Field of application Anchor shackles are designed for application where quick assembly of multiple connecting links are anticipated.

item no. Material

Anchor Shackle

Quick Q assembly

S370CP, SF370CP

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S370CP - Shackle - Cast Pin - See chart SF370CP - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application

Material

SERIES

Anchor shackles (collared pin) are designed for application where a more securely tight pin is required.

BASIC

item no.

F F F F F F F F

S371LK

item no.

Technical Data

Material

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S371LK - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Anchor shackles (locking pin) are designed for application where multiple connecting links are required as well as prevention from accidental dropping of pin.

S370CP SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

Pin

6370-3003 6370-3004 6370-3005 6370-3006 6370-3008 6370-3010 6370-3012 6370-3013 6370-3014 6370-3016 6370-3019 6370-3022 6370-3025 6370-3028 6370-3032

3 4 5 6 8 10 12 13 14 16 19 22 25 28 32

3 4 5 6 8 10 12 13 14 16 19 22 25 28 32

8 8 10 12 16 20 24 26 28 32 38 44 50 56 64

16.50 20.00 25.50 30.00 41.00 51.00 61.00 66.50 70.00 82.00 97.00 110.00 125.00 140.00 160.00

Forged Forged Forged Forged Forged Forged Forged Forged Cast Forged Forged Cast Forged Cast Cast

SF370CP

P B C

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

2370-0404 2370-0405 2370-0406 2370-0408 2370-0410 2370-0412 2370-0413 2370-0416

4 5 6 8 10 12 13 16

4 5 6 8 10 12 13 16

8 10 12 16 20 24 26 32

17.00 21.25 25.50 34.00 42.50 51.00 55.75 68.00

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

6371-0105 6371-0106 6371-0108 6371-0110 6371-0112

5 6 8 10 12

4.40 5.26 7.12 8.93 10.75

10 12 16 20 24

20 24 32 40 48

S371LK

3,000 2,000 1,200 800 400 200 120 100 80 50 30 20 15 10 6

1 1 1 2 2 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(1)

B.L. (kgs)

400 550 1,200 1,700 2,500 4,500 6,000 6,500 7,000 10,000 15,000 19,000 23,000 26,000 38,000 (1)

B.L. (kgs)

2,000 1,200 800 400 200 120 100 50

900 1,600 2,000 3,500 5,500 7,500 9,000 14,000

(1)

B.L. (kgs)

1,200 800 500 200 120

1,000 1,500 2,900 4,300 6,000

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

24

Piece per carton.

P B C

Plastic Back Card.

F

Upset Forging

* For more information on symbols, refer to page 17.


Shackles & Swivels L

A

A

B S370C, SF370C Anchor shackle (oval sink pin)

item no.

S370B, SF370B

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S370B - Shackle - Cast Pin - See chart SF370B - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Anchor shackles (square head pin) are designed for application where multiple connecting links are required as well as a permanent wrench tighten pin.

item no. Material

F F F F F

Anchor Shackle

Screwdriver

item no. no

S370C, SF370C

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S370C - Shackle - Cast Pin - See chart SF370C - Shackle/Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Anchor shackles (over sink pin) are design for application where multiple connecting links are requires as well as a non-intrusive sunken pin.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics item no. Material

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

Pin

6370-1004 6370-1005 6370-1006 6370-1008 6370-1010 6370-1012 6370-1013 6370-1016 6370-1019 6370-1022 6370-1025

4 5 6 8 10 12 13 16 19 22 25

4 5 6 8 10 12 13 16 19 22 25

8 10 12 16 20 24 26 32 38 44 50

20.00 25.50 30.00 41.00 51.00 61.00 66.50 82.00 97.00 110.00 125.00

Cast Cast Forged Forged Forged Forged Forged Forged Forged Cast Cast

SF370B SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2370-1008 2370-1010 2370-1012 2370-1013 2370-1016

8 10 12 13 16

8 10 12 13 16

16 20 24 28 32

34.00 42.50 51.00 55.75 68.00

S370C

2,000 1,200 800 400 200 120 100 50 30 20 15

550 1,000 1,700 2,800 4,500 6,000 6,500 10,000 15,000 19,000 23,000 (1)

B.L. (kgs)

400 200 120 100 50

3,500 5,500 7,500 9,000 14,000

(1)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

Pin

6370-2004 6370-2005 6370-2006 6370-2008 6370-2010 6370-2012 6370-2013 6370-2016 6370-2019 6370-2022 6370-2025

4 5 6 8 10 12 13 16 19 22 25

4 5 6 8 10 12 13 16 19 22 25

8 10 12 16 20 24 26 32 38 44 50

20.00 25.50 30.00 41.00 51.00 61.00 66.50 82.00 97.00 110.00 125.00

Forged Forged Forged Forged Forged Forged Cast Cast Cast Cast Cast

SF370C

(1)

B.L. (kgs)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

2370-2008 2370-2010 2370-2012 2370-2013 2370-2016

8 10 12 13 16

8 10 12 13 16

16 20 24 26 32

34.00 42.50 51.00 55.75 68.00

B.L. (kgs)

2,000 1,200 800 400 200 120 100 50 30 20 15

550 1,000 1,700 2,800 4,500 6,000 6,500 10,000 15,000 19,000 23,000 (1)

B.L. (kgs)

400 200 120 100 50

3,500 5,500 7,500 9,000 14,000

BASIC

F F F F F

S370B

© Copyright 2010 by Strudyna Thailand

Wrench

Piece per carton.

P B C

Plastic Back Card.

F

Upset Forging

* For more information on symbols, refer to page 17.

25

SERIES

S370B, SF370B Anchor shackle (square head pin)


Shackles & Swivels A

L

L A

B B B

S362CP Long D-shackle (collared pin)

S362 Long D-shackle

Long

item no.

S362

S362 SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

6362-0004 6362-0005 6362-0006 6362-0008

4 5 6 8

4 5 6 8

8 10 12 16

32 40 48 64

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S362 - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

S362LK Long D-shackle (locking pin) (1)

B.L. (kgs)

2,000 1,000 600 250

500 1,000 1,700 2,500

P B C

B.L. (kgs)

1 2 2 3 3 3

500 1,000 1,700 2,500 3,500 5,400

Field of application Long D-shackles are designed for application where a quick setup with long reach opening are required.

S362CP

item no. Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S362CP - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Long D-shackles (collared pin) are designed for application where a more secure tighthening pin is required.

S362CP SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

6362-3004 6362-3005 6362-3006 6362-3008 6362-3010 6362-3012

4 5 6 8 10 12

4 5 6 8 10 12

8 10 12 16 20 24

32 40 48 64 80 96

2,000 1,000 600 250 100 80

(1)

Locking Pin

S362LK

item no. Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S362LK - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Long D-shackles (locking pin) are designed for application where a long reach shackle opening as well as anti-dropping pins is required.

S362LK SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

6362-2004 6362-2005 6362-2006 6362-2008 6362-2010 6362-2012

4 5 6 8 10 12

4.40 4.40 5.25 7.10 8.90 10.70

8 10 12 16 20 24

32 40 48 64 80 96

(1)

B.L. (kgs)

2,000 1,000 600 250 120 100

500 1,000 1,700 2,500 3,500 5,400

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

26

SERIES

BASIC

Refer to page IV - class 1 load characteristics

Long D-shackle

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Shackles & Swivels L

A A B B

S362B Long D-shackle (square head pin) item no. Screwdriver

Wrench

Material

S362B, S362C Technical Data Casting material : Forging material : Surface treatment : Production :

AISI316 - DIN 1.4408 AISI316 - DIN 1.4401 "E.P. " (Electro polished) S362B - Shackle - Cast Pin - See chart : S362C - Shackle - Cast Pin - Forged

S362B

S362C Long D-shackle (oval sink pin) (1)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

Pin

6362-4004 6362-4005 6362-4006 6362-4008 6362-4010 6362-4012

4 5 6 8 10 12

4 5 6 8 10 12

8 10 12 16 20 24

32 40 48 64 80 96

Cast Cast Forged Forged Forged Forged

B.L. (kgs)

3,000 1,600 800 350 150 100

500 1,000 1,700 2,500 3,500 5,400

Field of application

S362C SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6362-1004 6362-1005 6362-1006 6362-1008 6362-1010 6362-1012

4 5 6 8 10 12

4 5 6 8 10 12

8 10 12 16 20 24

32 40 48 64 80 96

L

item no. Material

S360BWN, S360WO Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S360BWN - Shackle - Cast Pin - Forged : S360WO - Shackle - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Wide D-shackles (nut and cotter pin) and Wide D-shackles are designed for application where large opening shackles as well as a permanent wind/vibration resistant pins are required.

Note:(1) Standard safety factor for working load

500 1,000 1,700 2,500 3,500 5,400

B

S360WO Wide D-shackle

S360BWN Wide D-shackle (nut and cotter pin) Wide

2,000 1,000 600 250 100 100

A

B

Vibration resistant

(1)

B.L. (kgs)

S360BWN SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6360-3009 6360-3012

9 12

8 12

36 55

50.0 60.0

S360WO SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6360-9005 6360-9006 6360-9008 6360-9010 6360-9012

5 6 8 10 12

5 6 8 10 12

25 24 28 40 48

22.5 36.0 35.0 60.0 72.0

1,000 500 300 100 85

(1)

B.L. (kgs)

150 75

2,800 4,000

(1)

P B C

B.L. (kgs)

1 2 2 n/a n/a

750 1,350 2,500 3,350 4,000

is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

Piece per carton.

P B C

Plastic Back Card.

© Copyright 2010 by Strudyna Thailand

Material

* For more information on symbols, refer to page 17.

27

SERIES

item no.

BASIC

Long D-shackles (square head pin) and Long D-shackles (oval sink pin) are designed for application where a strong wrench tightening pin, as well as a long reach shackle openings are required.


Shackles & Swivels L A

B

S365LK Halyard shackle (locking pin)

S365LK

item no.

Quick release

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Production : S365LK - Shackle/Pin - Cast Surface treatment : "E.P." (Electro polished)

S365LK SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6365-0005 6365-0106 6365-0008

5 6 8

5 6 8

13 16 22

40.5 46.0 64.0

600 500 250

(1)

P B C

B.L. (kgs)

2 2 3

1,000 1,600 2,250

Field of application Halyard shackles (locking pin) are designed specifically for marine applications where quick 180º releases pin as well as anti-dropping function is required.

L A

B

S365DLK Halyard shackle (cross bar with locking pin) Quick release

item no.

S365DLK

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Production : S365DLK - Shackle/Pin - Cast Surface treatment : "E.P." (Electro polished)

Field of application

S365DLK SS316

SIZE (mm)

ØA (mm)

B (mm)

6365-1005 6365-1006 6365-1008

5 6 8

5 6 8

13 16 22

L (mm)

40.5 46.0 64.0

600 400 175

(1)

P B C

B.L. (kgs)

2 2 3

1,000 1,600 2,250

P B C

B.L. (kgs)

2 3 n/a n/a

1,900 3,700 5,200 6,500

Halyard shackles (cross bar with locking pin) are designed specifically for marine application where a quick 180º release pin as well as independent eye end is required.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

C

Refer to page IV - class 1 load characteristics

28

SERIES

BASIC

A

B S364LK Headboard shackle (cross bar and locking pin)

Quick assembly

item no.

S364LK

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S364LK- Shackle - Cast Pin - Forged Surface treatment : "E.P." (Electro polished)

S364LK SS316

SIZE (mm)

ØA (mm)

B (mm)

C (mm)

6364-0006 6364-0008 6364-0010 6364-0012

6 8 10 12

7.1 8.9 10.7 12.4

12 16 20 24

11.25 15.00 18.75 22.50

400 180 120 70

(1)

Field of application Headboard shackles (cross bar and locking pin) are designed for marine application where a quick assembly shackle with independed eye end is required.

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Shackles & Swivels L

L

A

A

B

B S380 Twist shackle item no. Material Twist

Twist

S380, S380CP, S380LK Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S380 - Shackle - Cast Pin - Forged S380CP - Shackle - Cast Pin - Forged S380LK - Shackle - Cast Pin - Forged Surface treatment : "E.P." (Electro polished)

item no. Material

Field of application Twist shackles and Twist shackles with locking pin are designed for application where a 90º angle twist setup is required.

S380

S380CP Twist shackle (collared pin)

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6380-0004 6380-0005 6380-0006 6380-0008

4 5 6 8

4 5 6 8

8 10 12 16

24 30 36 44

S380CP

2,000 1,000 600 505

SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6380-8004 6380-8005 6380-8006 6380-8008 6380-8010 6380-8012

4 5 6 8 10 12

4 5 6 8 10 12

8 10 12 16 20 24

24 30 36 44 51 66

(1)

P B C

B.L. (kgs)

1 2 2 3

665 1,100 1,600 2,800 (1)

B.L. (kgs)

2,000 1,000 600 505 200 125

665 1,100 1,600 2,800 4,600 6,000

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

L A

B

Material

S380LK SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

6380-5006 6380-5008

6 8

6 8

12 16

36 44

(1)

B.L. (kgs)

700 250

1,600 2,800

Competitive ch allenge

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.

BASIC

item no.

© Copyright 2010 by Strudyna Thailand

S380LK K Twist shackle with th locking pin

29

SERIES

Twist Shackle


Shackles & Swivels L

C

C

T

SF3606 Shackle key - stamped item no.

SF3606, S3607, SFP3606

SF3606 SS304

SIZE (mm)

C (mm)

L (mm)

T (mm)

4360-6321

32*100

31

100

2.5

SS316

SIZE (mm)

C (mm)

L (mm)

T (mm)

6360-7455 (M.P.) 6360-7787 (E.P.)

4.5*56 7*87

30 45

58 87

5.0 5.0

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Surface treatment : SF3606 - "E.P. " (Electro polished) : S3607 - "E.P. " (Electro polished) "M.P." (Mirror polished)

S3607 Shackle key - cast

item no.

S3607

Material

700

1,200 1,000

Field of application Shackle keys - stamped are designed for application where quick tool is needed for a more secure tightening g g of shackle pin. Shackle keys - cast are designed for application where more secure tightening of shackle pin is required.

L

L

C

C

SFP3606 Shackle key with plastic cover (Blue) plasti item no.

SFP3606

Material

SFP3606 Shackle key with plastic cover (White)

SS316

SIZE (mm)

C (mm)

L (mm)

T (mm)

2360-6320 2360-6322

32*100(Blue) 32*100(White)

31 31

100 100

2.5 2.5

P B C

250 250

3 3

Functions: Shackle keys are designed specifically to withstand rugged use and harsh environment found at sea.

1 Bottle opener

4

2 Spanner 3 Flat screwdriver

To keep your shackle key in good condition wash regularly in soapy water. This will avoid undesired build-up of salt.

4 Hole for lanyard 1

30

SERIES

BASIC

2 6

1

7 8 2

3

Functions: 1 13mm spanner 2 10mm spanner 3 8mm spanner

3

4 3~8mm spanner 5 Flat screwdriver

4

6 Hole for lanyard 7 Bottle opener

5

8 Protective cover

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Shackles & Swivels B

A

L A

B

B

Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S018 - Swivel - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Swivels eye and eye are designed for application where a quick swivel assembly with hook or quick link is expected.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

Quick assembly

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

4018-0004 4018-0005 4018-0006 4018-0008 4018-0009 4018-0010 4018-0013 4018-0016 4018-0019 4018-0022 4018-0025

6018-0004 6018-0005 6018-0006 6018-0008 6018-0009 6018-0010 6018-0013 6018-0016 6018-0019 6018-0022 6018-0025

4 5 6 8 9 10 13 16 19 22 25

4 5 6 8 9 10 13 16 19 22 25

11.0 13.0 14.7 20.5 22.0 24.0 31.0 38.0 42.0 47.0 63.0

50 59 66 94 102 118 152 188 223 240 294

item no.

S0181

Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 : S0181 - Pin - Forged Swivel - Cast Surface treatment : "E.P. " (Electro polished) Production

Field of application Swivels eye and jaw are designed for application where quick assembly with only one end hook or quick link is expected.

S0181I

S0181 SS304

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

4018-1006 4018-1008 4018-1010 4018-1013 4018-1016 4018-1019

6018-1006 6018-1008 6018-1010 6018-1013 6018-1016 6018-1019

6 8 10 13 16 19

6 8 10 13 16 19

12 16 20 26 32 38

66 94 118 152 188 223

Material

Technical Data

Allen key

S018 SS304

Material

item no. Material

Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S0181I - Pin - See Chart Swivel - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Swivels with internal hexagonal pin are designed for application where prevention of malicious tampering is required.

S0181I SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

Pin

6018-1106 6018-1108 6018-1310 6018-1113 6018-1116 6018-1119

6 8 10 13 16 19

6 8 10 13 16 19

12 16 20 26 32 38

66 94 118 152 188 223

Forged Forged Cast Cast Cast Cast

(1)

B.L. (kgs)

500 200 100 50 25 15

500 200 100 50 25 15

1,200 750 500 200 150 100 50 30 20 10 6

450 650 1,200 1,900 3,000 3,500 5,000 8,500 10,000 11,500 13,000

P B C

B.L. (kgs)

(2)

2 3 n/a n/a n/a n/a

1,200 1,900 3,500 5,000 8,500 10,000

P B C

B.L. (kgs)

2 3 n/a n/a n/a n/a

(2)

1,200 1,900 3,500 5,000 8,500 10,000

ツゥ Copyright 2010 by Strudyna Thailand

item no.

S018

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Swivel (eye and jaw)

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.

BASIC

Refer to page IV - class 1 load characteristics

31

SERIES

Swivel

S0181I Swivel (eye and jaw with internal hexagon pin)

S0181 Swivel (eye and jaw)

S018 Swivel (eye and eye)


Shackles & Swivels L

A

B

Quick assembly

item no.

S0182

Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4401/ AISI316 - DIN 1.4301 Production : S0182 - Swivel - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

S0182 SS304

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

4018-2006 4018-2008 4018-2010 4018-2013 4018-2016 4018-2019

6018-2006 6018-2008 6018-2010 6018-2013 6018-2016 6018-2019

6 8 10 13 16 19

6 8 10 13 16 19

12 16 20 26 32 38

66 94 118 152 188 223

Material

Technical Data

S0182-0840N Swivel (jaw and jaw with cotter nut pin)

S0182I Swivel (jaw and jaw with internal hexagon pin)

S0182 Swivel (jaw and jaw)

P B C

400 125 80 40 25 15

(1)

B.L. (kgs)

2 3 n/a n/a n/a n/a

1,200 1,900 3,500 5,000 8,500 10,000

P B C

B.L. (kgs)

Field of application Swivels (jaw and jaw) are designed for application where quick assembly on to closed end chains are expected.

SS316

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

Pin

6018-2106 6018-2108 6018-2110 6018-2113 6018-2116 6018-2119

6 8 10 13 16 19

6 8 10 13 16 19

12 16 20 26 32 38

66 94 118 152 188 223

Forged Forged Cast Cast Cast Cast

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S0182I - Swivel - Cast Pin - See Chart Surface treatment : "E.P. " (Electro polished)

Field of application Swivels (jaw and jaw with internal hexagonal pin) are designed for application where malicious tampering are expected.

Wrench

S0182I

item no.

S0182I

Allen key

item no.

S0182-0840N

Material

Technical Data

S0182-0840N

Casting material : AISI304 - DIN 1.4308 Forging material : AISI304 - DIN 1.4301 Production : S0182- 0840N - Swivel - Cast Pin - Forged Surface treatment : "E.P. " (Electro polished)

SS304

SIZE (mm)

テ連 (mm)

B (mm)

L (mm)

4018-2808

8

7.12

16

94

400 200 80 40 25 15

2 3 n/a n/a n/a n/a

(1)

1,200 1,900 3,500 5,000 8,500 10,000

(1)

B.L. (kgs)

125

1,900

Field of application Swivels (jaw and jaw with cotter nut pin) are designed for application where a lot of wind and vibration is expected.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

32

SERIES

BASIC

Refer to page IV - class 3 load characteristics

and jaw) Swivel (jaw

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Shackles & Swivels C

D

M

L

S3062/E1 Swivel screw item no.

S3062/E1

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Production : S3062/E1 - Swivel - Cast Surface treatment : "E.P. " (Electro polished)

S3062/E1 SS316

SIZE (mm/inch)

C (mm)

ØD (mm)

L (mm)

M (thread)

6306-2108 6306-2536

8 5/16"UNF

15 15

6.5 6.5

37.5 37.5

M8 5/16"UNF

1,000 1,000

Field of application Swivel screws are designed to be screw onto an external threaded rod for light lifting purpose. Swivel profile allows easy gripping.

Swivel screw

C

D

L

S3062/E2 Swivel cross screw

S3062/E2 Technical Data Casting material : AISI316 - DIN 1.4408 Production : S3062/E2 - Swivel - Cast Surface treatment : "E.P. " (Electro polished)

item no. Material

S3062/E2 SS316

SIZE (mm/inch)

C (mm)

ØD (mm)

L (mm)

M (thread)

6306-2208 6306-2526

8 5/16"UNF

15 15

6.5 6.5

37.5 37.5

M8 5/16"UNF

500 500

Field of application

Swivel cross screw

Piece per carton.

Swivel scre w

* For more information on symbols, refer to page 17.

BASIC

Swivel cross screws are designed to be screw onto an external threaded rod for light lifting purpose. Cross swivel profile allows easy gripping of two loose ends.

33

SERIES

© Copyright 2010 by Strudyna Thailand

M


Wire ropes & Thimbles M L

L

B S261 Wire rope clip - light type

S260 Wire rope clip (AISI standard)

S260

item no.

Technical Data : AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S260 - Clip - Cast U-bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Wire rope clips (AISI standard) are designed for application where a secure grip is needed. Two wire clip are expected per assembly.

Light Type

S261

34

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S261 - Clip - Cast U-bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Wire rope clips - light type are designed for ropes who's tensioning application isn't as critical as of AISI standard. Two wire clip is expected per assembly.

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Technical Data

SS316

SIZE (mm)

B (mm)

L (mm)

M (mm/inch)

4260-0150 4260-0002 4260-0003 4260-0004 4260-0005 4260-0006 4260-0008 4260-0010 4260-0012 4260-0014 4260-0016 4260-0019 4260-0022 4260-0025

6260-0150 6260-0002 6260-0003 6260-0004 6260-0005 6260-0006 6260-0008 6260-0010 6260-0012 6260-0014 6260-0016 6260-0019 6260-0022 6260-0025

1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 19.0 22.0 25.0

5.0 7.0 8.0 10.0 12.0 14.0 17.5 21.0 26.0 28.0 32.0 34.0 40.0 44.0

16.0 17.5 21.0 23.0 29.0 32.0 40.0 50.0 62.0 67.0 78.0 83.0 96.0 105.0

M2 M3 M3 M4 M5 M6 M8 M10 M12 M12 M14 M14 5/8" 5/8"

Piece per carton.

item no. Material

S260 SS304

Material

Casting material

S261 SS316

SIZE (mm)

B (mm)

L (mm)

M (mm/inch)

6261-0002 6261-0003 6261-0004 6261-0005 6261-0006 6261-0008 6261-0010 6261-0013 6261-0016 6261-0019 6261-0022 6261-0025 6261-0032

2 3 4 5 6 8 10 13 16 19 22 25 32

7.0 8.0 10.0 12.0 13.8 16.0 20.0 25.0 28.0 34.0 36.0 41.0 50.0

17.5 21.0 23.0 25.0 32.0 35.0 44.0 55.0 65.0 75.0 83.0 94.0 112.0

M3 M3 M4 M5 M6 M6 M8 M10 M10 M12 M12 M14 5/8"

6,000 3,000 2,500 1,200 1,000 600 300 200 100 100 75 50 25 20

3,000 2,500 2,000 1,000 600 500 250 150 100 75 50 40 30

* For more information on symbols, refer to page 17.


Wire ropes & Thimbles L

E B

M

SF512 Duplex clip

SF511 Simplex clip item no.

SF511, SF512

Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : SF511 - Clip- Forged SF512 - Clip- Forged Surface treatment : "E.P. " (Electro polished)

Field of application Simplex clips are designed for wire rope who needs a simple loop setup. It is not designed for heavy tensioning applications. Duplex clips are designed for wire rope who require a simple loop setup. Both screws must be securely tightened. Do not use in application where heavey load is expected.

F F F F F F

item no. Material

F F F F F F

SF511

SIZE

"for cable" 2 3 4 5 6 8

SS316

6511-0020 6511-0003 6511-0004 6511-0005 6511-0006 6511-0008

B (mm)

E (mm)

L (mm)

M (mm)

4.0 7.0 9.2 11.0 13.0 17.5

8.2 11.0 13.0 15.0 18.5 25.0

15.0 17.0 21.0 25.0 30.0 36.5

M4 M4 M5 M5 M6 M8

SF512

SIZE

SS316

"for cable"

B (mm)

E (mm)

L (mm)

M (mm)

6512-0002 6512-0003 6512-0004 6512-0005 6512-0006 6512-0008

2 3 4 5 6 8

5.0 7.0 9.2 11.0 13.0 17.5

9.0 11.4 13.5 16.0 19.0 25.5

30.0 34.0 40.0 50.0 60.0 75.0

M4 M4 M5 M5 M6 M8

2,000 1,500 700 500 400 150

B

Duplex clip

6,000 4,000 1,000 2,000 1,000 600

D

L

O

Material

S7350, SF7350, S7360 Technical Data Forging material : AISI316 - DIN 1.4401 Production : S7350 - Link - Forged SF7350 - Link - Forged S7360 - Link - Forged Surface treatment : "E.P. " (Electro polished)

item no.

Field of application Quick links are designed for application where a quick connecting piece is needed between two chain eye or hook with eye end. Triangle quick links are designed for application where a joint piece is needed between a sythetic rope and a hook or chain.

Material

F F F F

item no. Material

Piece per carton.

P B C

Plastic Back Card.

S7350 SS316

SIZE (mm)

B (mm)

Ă˜D (mm)

L (mm)

O (mm)

P B C

6785-0035 6735-0070 6735-0009 6735-0010 6735-0012

3.5 7.0 9.0 10.0 12.0

10.0 15.5 18.5 20.0 23.0

3.5 7.0 9.0 11.0 12.0

35.0 66.0 80.0 89.0 104.5

4.5 8.5 11.0 12.0 15.0

2 2 2 3 3

SF7350 SS316

SIZE (mm)

B (mm)

D (mm)

L (mm)

O (mm)

2735-0004 2735-0005 2735-0006 2735-0008

4 5 6 8

11.0 12.5 14.0 17.0

4 5 6 8

39.5 48.5 57.0 74.0

5.5 6.5 7.5 10.0

S7360 SS316

SIZE (mm)

D (mm)

L (mm)

O (mm)

6736-0006 6736-0010

6 10

6 10

56 87

7.5 12.0

F

Upset Forging

1,600 500 250 200 100

2,000 1,200 800 300

500 150

* For more information on symbols, refer to page 17.

BASIC

item no.

35

SERIES

S7360 Triangle quick link

S7350, SF7350 Quick link Quick link

Š Copyright 2010 by Strudyna Thailand

O


Wire ropes & Thimbles B

L

T

T SF234U Light thimbles item no. Material Light type

Oversize

SF234U, SF414 Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF234U - Thimble - Forged SF414 - Thimble - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Light thimbles are designed for application where secure loop for wire rope is needed. Heavy thimbles are designed for applications where heavy loops and load are expected.

item no. Material

Heavy thimbles

SF234U

SF414 Heavy thimbles

SS316

SIZE (mm)

B (mm)

L (mm)

T (mm)

Dia Ø Cable (mm)

6234-0002 6234-0003 6234-0004 6234-0005 6234-0006 6234-0008 6234-1010 6234-1012 6234-1014 6234-1016 6234-1018 6234-0020 6234-0022 6234-0025

2 3 4 5 6 8 10 12 14 16 18 20 22 25

10.0 12.5 13.0 15.5 17.0 22.5 26.0 31.0 34.0 37.5 40.0 45.0 50.5 54.0

25.0 28.5 33.0 36.5 40.0 51.0 58.5 68.0 74.0 83.0 92.0 104.0 115.0 125.0

0.8 1.0 1.2 1.2 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 4.0 4.0

2 3 4 5 6 8 10 12 14 16 18 20 22 25

SF414 SS316

SIZE (inch)

B (mm)

L (mm)

T (mm)

Dia Ø Cable (inch)

6404-0316 6414-0401 6414-0615 6414-0803 6414-0201 6414-0805 6414-0403 6414-0708 6414-0001

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1"

18.0 23.3 27.3 29.0 38.0 45.0 50.8 57.0 65.5

43.0 56.0 63.0 73.0 92.0 106.0 125.0 139.8 157.5

1.0 1.5 2.0 2.5 4.0 4.0 5.0 6.0 6.0

3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1"

© Copyright 2010 by Strudyna Thailand

SERIES

BASIC 36

L

S2343 Opened end thimbles item no. Material

Technical Data Casting material Production

: AISI304 - DIN 1.4308 : S2343 - Thimble - Cast S2344 - Thimble - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Opened end thimbles are designed for application where extra heavy loads are expected. Closed end thimbles are designed for application where extra heavy loads are expected. Close end thimbles helps to avoids any deformation of thimbles.

item no. Material

thimbles

Piece per carton.

S2343

1,000 500 300 160 80 50 25 20 14

B

B

L

S2343, S2344

5,000 3,500 2,000 1,500 1,000 500 300 300 130 100 60 50 40 30

S2344 Closed end thimbles

SS304

SIZE (mm)

B (mm)

L (mm)

Dia Ø Cable (mm)

4234-3006 4234-3008 4234-3010 4234-3012 4234-3016 4234-3020 4234-3022 4234-3025

6 8 10 12 16 20 22 25

16.0 22.4 28.0 34.0 44.0 54.0 59.0 68.0

35.5 47.3 58.0 67.0 91.0 112.0 120.0 134.0

6 8 10 12 16 20 22 25

S2344 SS304

SIZE (mm)

B (mm)

L (mm)

Dia Ø Cable (mm)

4234-4002 4234-4003 4234-4004 4234-4006 4234-4008 4234-4010 4234-4012 4234-4014 4234-4016 4234-4019 4234-4022 4234-4025

2 3 4 6 8 10 12 14 16 19 22 25

8 10 12 16 24 28 35 39 45 54 60 70

21.0 26.0 32.0 43.0 58.5 72.0 86.0 100.8 110.0 124.0 130.0 148.0

2 3 4 6 8 10 12 14 16 20 22 25

1,000 650 300 200 75 40 30 20

5,000 2,500 1,500 600 300 150 75 60 40 35 25 20

* For more information on symbols, refer to page 17.


Wire ropes & Thimbles B

C

B

C

T

T S10 (C - link)

For Assembly

item no.

S10, S661 Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S10 - Link - Cast S661 - Link - Cast Surface treatment : "E.P. " (Electro polished)

Field of application C-Links are designed for application where a simple elongation of chain are needed. C-Link are not designed for heavy loads. Connecting links are designed for application where a elongation fitting is needed to extend an existing chain. Connecting link are not to be used as a permanent fixture.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

S10 SS304

SS316

SIZE (mm)

4100-0005 4100-0006 4100-0008 4100-0009 4100-0010 4100-0011 4100-0013 4100-0016 4100-0019 4100-0022 4100-0025

6100-0005 6100-0006 6100-0008 6100-0009 6100-0010 6100-0011 6100-0013 6100-0016 6100-0019 6100-0022 6100-0025

5 6 8 9 10 11 13 16 19 22 25

Material

Technical Data

item no. Material

Refer to page IV - class 2 load characteristics

Instruction of S661

3

C (mm)

T (mm)

7.5 9.0 12.0 13.5 15.0 16.5 19.5 24.0 28.5 33.0 37.5

20 24 32 36 40 44 52 64 76 88 100

5.0 6.0 8.0 9.0 10.0 11.0 13.0 16.0 19.0 23.0 26.5

SS316

SIZE (inch)

B (mm)

C (mm)

T (mm)

6661-0316 6661-0104 6661-0516 6661-0308 6661-0716 6661-0102 6661-0508 6661-0304

3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

8.5 10.5 12.0 15.0 16.5 18.5 24.0 28.5

17.00 20.80 24.00 28.25 32.50 36.75 48.00 56.50

5.0 6.0 8.0 9.5 11.0 12.5 16.0 19.0

(1)

B.L. (kgs)

3,000 1,500 700 500 300 250 150 100 50 30 20

230 300 550 750 850 950 1,400 2,050 2,500 3,000 4,750 (1)

B.L. (kgs)

3,000 1,250 600 400 250 200 100 50

550 800 1,450 1,900 2,550 3,200 5,500 8,000

Piece per carton.

P B C

Plastic Back Card.

F

Upset Forging

* For more information on symbols, refer to page 17.

37

SERIES

Š Copyright 2010 by Strudyna Thailand

2

S661

B (mm)

BASIC

1

S661 Connecting link


Wire ropes & Thimbles

SWR 1x19 Wire rope 1x19

SWR 1x19

item no. Material

Technical Data Type of material Construction Type of lay

: AISI316 : 1x19 : RHRL (Right hand regular lay)

Field of application 316 Stainless Steel 1x19 wire is used primarily for a yacht standing rigging.

SWR 1x19

(1)

SS316

DIA (mm)

Length/Reel (m)

App w.t (kg/100m)

App w.t (kg/reel)

B.L. (kgs)

6119-2535 6119-3305 6119-4305 6119-5305 6119-6305 6119-8305 6119-1305 6119-1235

2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0

305 305 305 305 305 305 305 305

3.10 4.46 7.93 12.40 17.80 31.70 49.70 71.30

9.46 13.60 24.19 37.82 54.29 96.69 150.98 217.47

500 720 1,285 2,000 2,876 4,640 7,560 10,890

SWR 7x7 Wire rope 7x7

SWR 7x7

item no. Material

38

Type of material Construction Type of lay

: AISI316 : 7x7 : RHRL (Right hand regular lay)

Field of application Stainless Steel 7x7 wire rope configuration provides an excellent balance between flexibility and strength.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 6 load characteristics

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Technical Data

Piece per carton.

SWR 7x7

(1)

SS316

DIA (mm)

Length/Reel (m)

App w.t (kg/100m)

App w.t (kg/reel)

B.L. (kgs)

6700-7203 6700-7253 6700-7303 6700-7403 6700-7503 6700-7603 6700-7803 6700-7305 6700-7235 6700-7801 6700-7325 6700-7163 6700-7401 6700-7165

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 1/8" 5/32" 3/16" 1/4" 5/16"

305 305 305 305 305 305 305 305 305 305 305 305 305 305

1.57 8.24 3.54 6.29 9.83 14.20 25.20 39.30 56.70 2.80 4.30 6.20 10.60 16.70

4.79 2.70 10.80 19.18 29.98 43.34 76.86 119.87 172.94 8.54 13.12 18.91 32.33 50.94

235 428 612 907 1,418 2,040 3,632 5,175 7,445 612 907 1,418 2,845 4,185

* For more information on symbols, refer to page 17.


Wire ropes & Thimbles

SWR 7x19 Wire rope 7x19

: AISI316 : 7x19 : RHRL (Right hand regular lay)

Field of application Stainless steel 7x19 wire rope configuration provides the most flexible solution for applications where many tight cornering of wire rope is expected.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 6 load characteristics

SWR 7x19

(1)

SS316

DIA (mm)

Length/Reel (m)

App w.t (kg/100m)

App w.t (kg/reel)

B.L. (kgs)

6701-9203 6701-9253 6701-9303 6701-9403 6701-9503 6701-9603 6701-9803 6701-9103 6701-9123 6701-9801 6701-9325 6701-9163 6701-9401 6701-9165

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 1/8" 5/32" 3/16" 1/4" 5/16"

305 305 305 305 305 305 305 305 305 305 305 305 305 305

1.70 2.70 3.42 6.09 9.52 13.80 24.30 38.10 54.80 2.90 4.50 6.50 11.00 17.30

5.19 8.24 10.43 18.58 29.04 42.09 74.12 116.21 167.14 8.85 13.73 19.83 33.55 52.77

200 378 544 959 1,509 2,181 3,874 5,375 7,750 544 959 1,309 3,440 5,375

Š Copyright 2010 by Strudyna Thailand

Type of material Construction Type of lay

Material

* For more information on symbols, refer to page 17.

39

SERIES

Technical Data

item no.

BASIC

SWR 7x19


Hooks & Snaps O

O

A

L

B

B S323H Grab hook (eye end)

S323H, S330

item no.

S323H

Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S323H - Hook - Cast S330 - Hook - Cast Pin - See chart Surface treatment : "E.P. " (Electro polished)

Field of application Grap hooks (eye end) are designed for application where heavy loads are expected. The small opening of the clevis limits functionality but increases it's load strength. Grap hooks (clevis end) are designed for heavy application where an open end is required for assembly onto a chain.

item no.

SS316

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

6323-2104 6323-2516 6323-2308 6323-2102 6323-2508

1/4" 5/16" 3/8" 1/2" 5/8"

13.0 14.5 17.0 22.5 27.0

77.6 90.0 103.6 136.2 169.1

8.7 11.1 12.7 16.6 19.8

S330

Material

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

S330 Grab hook (clevis end)

SS316

SIZE (inch)

ØA (mm)

B (mm)

L (mm)

O (mm)

6330-0104 6330-0516 6330-0308 6330-0102

1/4" 5/16" 3/8" 1/2"

9.5 11.5 12.7 17.0

11.1 12.7 15.0 19.0

79.6 96.0 108.6 143.7

8.7 11.1 12.7 16.6

(1)

B.L. (kgs)

250 125 80 40 20

2,900 3,700 5,800 7,000 13,000 (2)

B.L. (kgs)

150 90 60 30

2,100 3,100 4,000 7,350

Refer to page IV - class 2 load characteristics

O

L

B

B

40

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S325 Slip hook (eye end)

S325, S325X

item no. Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S325 - Hook - Cast S325X - Hook - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Slip hooks (eye end) are designed for light loads with versatility in mind. The open hook system allows easy loading and unloading of lifted hook/chain systems. Slip hooks (eye end with safety latch) with safety latch are designed for application where a lot of movement may occur. Safety latch prevents accidental fall out of inserted hook/chain systems.

Note:(1) Standard safety factor for working ng load is 1/4 of breaking load.

item no. Material

S325

S325X Slip hook (eye end with safety latch) ØB (mm)

L (mm)

O (mm)

13 16 18 24

91.0 108.0 124.5 161.0

22 24 28 37

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

1/4" 5/16" 3/8 3/8" 1/2"

13 16 18 24

91.0 108.0 124.5 161.0

22 24 28 37

SS316

SIZE (inch)

6325-0014 6325-0051 6325-0038 6325-0012

1/4" 5/16" 3/8" 1/2"

S325X SS316

6325-5104 6325-5516 6325 5308 6325-5308 6325-5121

(1)

B.L. (kgs)

200 100 60 30

1,500 2,900 3,200 5,400 (1)

B.L. (kgs)

150 100 50 30

1,500 2,900 3,200 5,400

Refer to page IV - class 1 load characteristics racteristics

Piece per carton.

* For more information on symbols, refer to page 17.


Hooks & Snaps O

O L

A

B

B S331 Slip hook (clevis end)

S331, S331X

item no. Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S331 - Hook - Cast Pin - See chart S331X - Hook - Cast Pin - See chart Surface treatment : "E.P. " (Electro polished) item no.

Field of application Slip hooks (clevis end) are designed for easy loading and unloading of hook/chain systems. Clevis end allows easy assembly to chain with out extra fittings. Slip hooks (clevis end with safety latch) are designed for quick assembly onto chain without extra fitting and provices security for accidental fall out of inserted chain/hook system.

Material

S331

S331X Slip hook (clevis end with safety latch)

SS316

SIZE (inch)

テ連 (mm)

B (mm)

O (mm)

L (mm)

6331-0104 6331-0516 6331-0308 6331-0102

1/4" 5/16" 3/8" 1/2"

9 11 12 16

11.1 12.7 15.0 19.0

22.5 24.5 30.0 36.0

100.0 112.0 131.5 165.5

SS316

SIZE (inch)

テ連 (mm)

B (mm)

O (mm)

L (mm)

6331-1104 6331-1516 6331-1308 6331-1102

1/4" 5/16" 3/8" 1/2"

9 11 12 16

11.1 12.7 15.0 19.0

22.5 24.5 30.0 36.0

100.0 112.0 131.5 165.5

S331X

(1)

B.L. (kgs)

120 70 40 25

2,000 3,100 4,000 5,600 (1)

B.L. (kgs)

125 70 40 25

2,000 3,100 4,000 5,600

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

O

Refer to page IV - class 1 load characteristics

L

B

item no.

Swivel Oversize

Material

S4322, S2511 Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S4322 - Hook/Swivel - Cast S2511 - Hook/Swivel - Cast Surface treatment : "E.P. " (Electro polished)

item no.

Field of application

Material

Slip hooks (swivel end with safety latch) are designed for application where turning is expected. Safetyy latch prevents accidental fall out of inserted d hook/chain system. Heavy slip hooks (swivel end with safety latch) tch) are designed for application where mid air turning of lifted load is expected. Safetly latch prevents ents from accidental fall out of insereted chain/hook system.

S4322 SS316

SIZE (inch)

B (mm)

L (mm)

O (mm)

6432-2104 6432-2516 6432-2308 6462-2102

1/4" 5/16" 3/8" 1/2"

22.0 27.5 28.0 35.7

119.0 141.5 160.5 199.5

22.5 24.0 28.5 36.0

SS316

SIZE (inch)

B (mm) ( )

L ((mm))

O ((mm))

6251-1001 6251-1114

1" 1.1/4"

28.0 35.7

150.0 198.0 1

23.5 29.5

S2511

ツゥ Copyright 2010 by Strudyna Thailand

Swivel

S2511 Heavy slip hook (swivel end with safety latch) (2)

B.L. (kgs)

100 75 40 20

1,700 2,600 3,850 5,600 (2)

B.L. g ) ((kgs)

75 25

2,000 4,000

Note:(2) Standard safety factor for working ng load

BASIC

is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics cteristics

Piece per carton.

* For more information on symbols, refer to page 17.

41

SERIES

B S4322 Slip hook (swivel end with safety latch)


Hooks & Snaps O B

L

S225SQ Bolt snap (square swivel end)

S225 Bolt snap (swivel end) item no.

S225, S225SQ Technical Data Casting material

: AISI304- DIN 1.4308/ AISI316 - DIN 1.4408 Production : S225 - Snap - Cast : S225SQ - Snap - Cast Surface treatment : "E.P. " (Electro polished)

Bolt snaps (swivel end) are designed for a quick and easy attachment of an object such as key. The round swivel end allows fitting onto a chain. Bolt snap (square swivel end) allow the snap to be knitted onto synthetic textiles.

B

SS316

SIZE (inch)

(mm)

L (mm)

O (mm)

4225-0308 4225-0102 4225-0508 4225-0304 4225-1104

6225-0308 6225-0102 6225-0508 6225-0304 6225-1104

3/8" 1/2" 5/8" 3/4" 1¼"

11.0 13.5 17.0 20.5 33.0

63 75 85 91 120

6.3 7.0 8.0 8.0 13.7

item no.

Field of application

S225 SS304

Material

Material

S225SQ

SIZE (inch)

SS316

6225-1318 1”3.1/8”

B (inch)

L (mm)

O (mm)

1"

80

7.0

(1)

B.L. (kgs)

1,000 1,000 500 500 170

180 250 650 650 550 (2)

B.L. (kgs)

500

180

O 1

O

L

O

S231, S232, S245 Bolt snap (hook end)

S161, S162, S163 Bolt snap (double snap end) item no.

S161, S162, S163 S231, S232, S245 : : : Surface treatment :

SS316

SIZE (inch)

L (mm)

O (mm)

6161-0312

3.1/2"

90

6.5

SS316

SIZE (inch)

L (mm)

O (mm)

6162-0004

4"

100

10

SS316

SIZE (inch)

L (mm)

O (mm)

6163-0434

4.3/4"

120

11.5

item no.

Technical Data Casting material Production

S161

Material

AISI316 - DIN 1.4408 S161, S162, S163 - Snap - Cast S231, S232, S245 - Snap - Cast "E.P. " (Electro polished)

S162

Material

item no.

item no.

S231

(1)

B.L. (kgs)

400

(1)

300

SIZE (inch)

L (mm)

O (mm)

6231-3102

3.1/2"

90

10

8

SS316

SIZE (inch)

L (mm)

O (mm)

O1 (mm)

6232-4140

4.1/4"

105

10

9.5

SS316

SIZE (inch)

L (mm)

O (mm)

O1 (mm)

6245-5000

5"

130

14

13

S232

Material

item no.

S245

Material

L

S2432

350 B.L. (kgs)

SS316

Material

item no.

360 (1)

B.L. (kgs)

O1 (mm)

500

190 (1)

B.L. (kgs)

200

240 (1)

B.L. (kgs)

200

375

Technical Data

Casting material : AISI316 - DIN 1.4408 Production : S2432 - Hook - Cast Surface treatment : "E.P." (Electro polished)

Field of application Double locking safety hooks are designed for application where close contact with hook is expected. Double safety avoids accidental opening of latch.

Note:(1) Standard safety factor for working load

S2432 Double locking safety hook

is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

Note:(2) Standard safety factor for working load

item no.

S2432 SS316

SIZE (mm)

ØB (mm)

L (mm)

O (mm)

6243-1019

19

20

109

20

Material

is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

42

Material

180

O

SERIES

Bolt snaps (double snap end) are designed for application where a quick and easy fitting is needed to join two loose chains. Bolt snaps (hook end) are designed for application where a simple fitting is needed to join two loose chain or ropes.

500

B

BASIC

© Copyright 2010 by Strudyna Thailand

Field of application

S163

(1)

B.L. (kgs)

Piece per carton.

P B C

Plastic Back Card.

125

(1)

P B C

B.L. (kgs)

3

1,550

* For more information on symbols, refer to page 17.


Hooks & Snaps O O

L

B

S2311 Safety snap hook (with safety latch) item no.

S2311, S461

SS304

SS316

SIZE (mm)

ØB (mm)

L (mm)

O (mm)

4231-1019 4231-1028

6231-1019 6231-1028

19 28

19 28

100 119

20.4 23.8

Material

Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S2311 - Hook - Cast : S461 - Hook - Cast Surface treatment : "E.P. " (Electro polished)

S2311

S461 Heavy safety snap hook (with safety latch)

item no.

S461

Safety snap hooks (with safety latch) are designed for light loads with wide open hook for insert. Safety latch prevents accidental fall out of inserted chain/hook system. Heavy safety snap hooks (with safety latch) are designed for heavier loads than standard design. Wide open hook makes insertion of hook/chain easy. Safety latch prevents accidental fall out of inserted systems.

200 150

SS316

SIZE (mm)

ØB (mm)

L (mm)

O (mm)

6461-0090

90

19

90

26

Material

Field of application

P B C

(1)

B.L. (kgs)

3 3

750 1,000 (1)

B.L. (kgs)

250

1,100

O O L B

B S2471 Spring snaps (hook end)

Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S2470 - Snap - Cast : S2471 - Snap - Cast Surface treatment : "E.P. " (Electro polished)

S2470 SS304

SS316

SIZE (mm)

-4247-0050 4247-0070 4247-0100

6247-0032 6247-0050 6247-0070 6247-0100

32 50 70 100

Material

Hammer

item no.

Field of application Spring snaps (eye end) are designed as a quick and easy fitting for assembly with keys or other objects. Spring snaps (hook end) are designed to be hammered in for sailing cloth.

Material

Note:(1) Standard safetyy factor for working g load

S2471

P B C

O

B (mm)

L (mm)

(mm)

4.0 6.6 9.0 13.8

32 50 70 98

7 10 14 20

L

1,500 1,200 500 150

SS304

SIZE (mm)

B (mm)

(mm)

O (mm)

4247-1050 4247-1065 4247-1090

50 65 90

8.5 8.7 11.5

50 65 90

12.8 16.6 22.8

n/a 2 3 3

(1)

B.L. (kgs)

80 220 500 900

© Copyright 2010 by Strudyna Thailand

item no.

S2470, S2471

(1)

B.L. (kgs)

1,000 500 150

250 350 700

is 1/4 of breaking load.

(eye end) Spring snaps

Piece per carton.

P B C

Plastic Back Card.

Spring snaps (hook end)

* For more information on symbols, refer to page 17.

BASIC

Refer to page IV - class 2 load characteristics

43

SERIES

S2470 Spring snaps (eye end)


Hooks & Snaps D

L O

O SF2431 Spring snaps - type2 (circular hook with opened end)

SF2431, SF2431X

item no. Material

Technical Data Forging material Production

: AISI316 - DIN 1.4401 : SF2431 - Snap - Forged SF2431X - Snap - Forged Surface treatment : "E.P." (Electro polished)

SF2431

SF2431X Spring snaps - type2 (circular hook with welded bar end) L

SS316

SIZE (mm)

ØD (mm)

(mm)

O (mm)

6243-1006 6243-1008 6243-1010 6243-1012

6 8 10 12

6 8 10 12

60 80 100 120

15 22 25 28

SIZE (mm)

ØD (mm)

L

SS316

(mm)

O (mm)

6243-1106 6243-1108 6243-1110 6243-1112

6 8 10 12

6 8 10 12

60 80 100 120

15 22 25 28

(1)

B.L. (kgs)

1,000 350 150 100

800 1,450 2.850 3,600

Field of application Spring snaps - type2 (circular hook with opened end) provides a quick and easy solution to joining two wire or ropes. Spring snaps - type2 (circular hook with welded bar end) with welded end bar provides a quick and easy solution to joining of two wire or eye ends. Welded end bars provides the location for knitting of leather or synthetic rope.

item no. Material

SF2431X

(1)

B.L. (kgs)

500 350 150 100

800 1,650 2,850 3,600

D

SERIES

BASIC

O

44

O

© Copyright 2010 by Strudyna Thailand

L

SF24302 Spring snaps - type1 (circular hook with opened end)

SF24302, SF24302B Technical Data Forging material

: AISI304- DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF24302 - Snap - Forged SF24302B - Snap - Forged Surface treatment : "E.P." (Electro polished)

Field of application Spring snaps - type1 (circular hook with opened end) provides an easy fitting to joining of two ropes or eye ends fittings. Spring snaps (circular hook with angled latch) with angular pin provides a more comfort opening of the spring during operation.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

item no.

SF24302

SF24302B Spring snaps (circular hook with angled latch)

SS304

SS316

4243-0206 4243-0208 4243-0210 4243-0212

6243-0206 6243-0208 6243-0210 6243-0212

6 8 10 12

6 8 10 12

60 80 100 120

11.5 16.0 19.0 28.0

item no.

SF24302B

ØD (mm)

L (mm)

(mm)

SS304

SS316

SIZE (mm)

ØD (mm)

L (mm)

O (mm)

4243-1206 4243-1208 4243-0211 4243-1212

6243-1206 6243-1208 6243-0211 6243-1212

6 8 10 12

6 8 10 12

60 80 100 120

14 20 24 29

Material

(1)

O

SIZE (mm)

Material

B.L. (kgs)

700 350 150 100

830 1,600 2,500 3,300 (1)

B.L. (kgs)

700 350 150 100

830 1,600 2,500 3,300

Refer to page IV class 2 load characteristics

Piece per carton.

* For more information on symbols, refer to page 17.


Hooks & Snaps D

L O

O

B B SF24301B Spring snaps (circular hook, angled latch with eye end)

SF24301 Spring snaps (circular hook with eye end)

SF24301, SF24301B Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF24301 - Snap - Forged SF24301B - Snap - Forged Surface treatment : "E.P. " (Electro polished)

item no.

SF24301 SS304

SS316

SIZE (mm)

4243-0106 4243-0108 4243-0110 4243-0112

6243-0106 6243-0108 6243-0110 6243-0112

6 8 10 12

Material

B (mm)

ØD (mm)

L (mm)

O (mm)

10 12 15 19

6 8 10 12

60 80 100 120

13 18 21 27

(1)

B.L. (kgs)

600 300 150 100

830 1,600 2,500 3,300

Field of application Spring snaps (circular hook with eye end) provides a quick and easy fitting to be linked with chain or other hooks. Spring snaps (circular hook, angled latch with eye end) is designed for comfort to the opening of the latch while eye end for assembly onto rope or quick links.

item no.

SF24301B SS304

SS316

SIZE (mm)

4243-0126 4243-0128 4243-0121 4243-0122

6243-0126 6243-0128 6243-0121 6243-0122

6 8 10 12

Material

B (mm)

ØD (mm)

L (mm)

O (mm)

10 12 15 19

6 8 10 12

60 80 100 120

13 18 21 27

(1)

B.L. (kgs)

600 300 150 100

830 1,600 2,500 3,300

Spring snaps

D L

Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF2430 - Snap - Forged SF2430B - Snap - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Spring snaps (angled hook with eye end) are designed for application where minimum movement of hook is required during loading process. Spring snaps (angled hook and latch with eye end) are designed for comfort during opening of latch while angled hook is designed to minimize movement during loading process.

SS304

SS316

4243-0006 4243-0008 4243-0010 4243-0012

6243-0006 6243-0008 6243-0010 6243-0012

6 8 10 12

10 12 15 19

6 8 10 12

61 81 102 122

12.5 17.0 23.5 28.0

B (mm)

ØD (mm)

L (mm)

O (mm)

10 12 15 19

6 8 10 12

61 81 102 122

12.5 17.0 23.5 28.0

item no. Material

SF2430

SIZE (mm)

Material

SF2430B SS304

SS316

SIZE (mm)

4243-0306 4243-0308 4243-0310 4243-0312

6243-0306 6243-0308 6243-0310 6243-0312

6 8 10 12

B (mm)

ØD (mm)

L (mm)

O (mm)

(1)

B.L. (kgs)

500 300 150 100

750 1,750 2,250 3,650 (1)

B.L. (kgs)

500 300 150 100

750 1,750 2,250 3,650

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

BASIC

item no.

SF2430B Spring snaps (angled hook and latch with eye end)

Refer to page IV - class 2 load characteristics

Piece per carton.

* For more information on symbols, refer to page XVI.

45

SERIES

B

SF2430, SF2430B

© Copyright 2010 by Strudyna Thailand

O

O

B SF2430 Spring snaps (angled hook with eye end)


Hooks & Snaps o

L

S247A, S247H, SF878

S247A

Material

Technical Data Casting material : AISI304 - DIN 1.4308 Forging material : AISI304 - DIN 1.4301 Production : S247A - Snap - Cast S247H - Snap - Cast SF878 - Snap - Forged Surface treatment : "E.P. " (Electro polished)

item no.

Field of application

item no.

Chain snaps (closed end) are designed to be used for a quick and easy assembly to two separate loose chains. Chain snaps (opened end) are designed for quick and easy linking of two seperate loose chains. Chain snaps (double hook end) are designed for a quick and easy setup with two loose chains or fittings.

SIZE (mm)

(mm)

L (mm)

O (mm)

4247-7206

6

6

80

11

SS304

SIZE (mm)

L (mm)

O (mm)

O1 (mm)

4247-7106

6

75

10.3

8

D

SS304

SIZE (mm)

(mm)

L (mm)

O (mm)

4878-0006 4878-0008

6 8

6.8 9.4

75.2 98.0

12 14

SF878

Material

D

SF878 Chain snaps (double hook end)

SS304

S247H

Material

D

S247H Chain snaps (opened end)

S247A Chain snaps (closed end) item no.

O

O1

D

(1)

B.L. (kgs)

500

120 (1)

B.L. (kgs)

600

180 (1)

B.L. (kgs)

600 350

300 550

O

L B

B

D

46

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S2450, SF2450 Snap hook item no.

S2450, SF2450 S2450X, SF2450X

(mm)

L (mm)

O (mm)

4.5 8.0 9.0 11.0 11.0 13.0

33 56 72 98 116 134

11.5 20.5 26.5 35.0 40.0 46.0

ØB

ØD

(mm)

(mm)

L (mm)

O (mm)

8 10 13 17

5 6 8 10

40 48 64 80

16.0 18.0 23.5 30.0

SIZE (mm)

ØB (mm)

ØD (mm)

L (mm)

O (mm)

4 7 9 11 12 13

6.5 8.0 11.0 18.0 20.0 20.0

4.5 8.0 9.0 11.0 11.0 13.0

33 56 72 98 116 134

11.5 20.5 26.5 35.0 40.0 46.0

SS316

SIZE (mm)

ØB (mm)

ØD (mm)

L (mm)

O (mm)

2245-0205 2245-0206 2245-0208 2245-0210

5 6 8 10

7 9 12 16

5 6 8 10

40 48 64 80

16.0 18.0 23.5 30.0

ØB

ØD

SS316

SIZE (mm)

(mm)

6245-0004 6245-0007 6245-0009 6245-0011 6245-0012 6245-0013

4 7 9 11 12 13

6.6 9.5 12.8 19.0 22.0 22.0

SS316

SIZE (mm)

2245-0005 2245-0060 2245-0080 2245-0100

5 6 8 10

SS316

6245-0204 6245-0207 6245-0209 6245-0211 6245-0212 6245-0213

Material

Technical Data Forging material : AISI316- DIN 1.4408 Production : S2450, SF2450 - Snap - Forged S2450X, SF2450X - Snap - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Snap hooks are the standard in use for the assembly of two loose end chain or ropes. Snap hooks (with eye) are the standard in use to link two loose chain or ropes. Eye end provides extra security for synthetic ropes or wires.

item no. Material

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics item no. Material

item no. Material

Snap hook

Piece per carton.

S2450

P B C

S2450X, SF2450X Snap hook (with eye)

SF2450

S2450X

SF2450X

Plastic Back Card.

2,500 600 250 120 100 70

1,500 1,000 300 200

2,500 550 300 120 100 70

1,000 800 400 200

(1)

P B C

B.L. (kgs)

2 n/a n/a n/a n/a 3

100 400 700 900 1,000 1,200

P B C

B.L. (kgs)

2 2 3 n/a

(1)

160 300 600 800 (1)

P B C

B.L. (kgs)

1 n/a n/a n/a n/a 3

100 400 700 900 1,000 1,200

P B C

B.L. (kgs)

2 2 3 n/a

(1)

160 300 600 800

* For more information on symbols, refer to page XVI.


Hooks & Snaps O

L

B

D

S2490 Heavy spring snaps (angled hook)

S2490, S2490X

item no. Material

Technical Data Forging material : AISI316 - DIN 1.4401 Production : S2490 - Snap - Forged S2490X - Snap - Forged Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Heavy spring snaps (angled hook) provides a larger opening for more assembly of hooks and eye ends in the same hook. Heavy spring snaps (angled hook with eye end) provide a larger opening as well as space for more fittings of hook and eye end to be assembled. Eye end allows secure straping of synthetic rope or wire ropes.

S2490

S2490X Heavy spring snaps (angled hook with eye end) ØD

SS316

SIZE (mm)

(mm)

L (mm)

O (mm)

6249-0009

9

9

90

18

S2490X

ØB

ØD

SS316

SIZE (mm)

(mm)

6249-0109

9

11

(1)

B.L. (kgs)

n/a

(mm)

L (mm)

O (mm)

9

90

18

1,000 (1)

B.L. (kgs)

n/a

1,000

Be careful the wire rope slide out from the snap

Snap hook

O

D

S369 Locking snaps (angled hook)

Technical Data : AISI316 - DIN 1.4408 : S369 - Snap - Cast S369X - Snap - Cast Surface treatment : "E.P. " (Electro polished)

item no. Material

Casting material Production

Field of application Locking snaps (angled hook) are designed for application where minimum swivel movement is required during loading process. Locking snaps (angled hook with eye end) are designed for application where minimum swivel movement is required during loading process.

item no. Material

S369 SS316

SIZE (mm)

6369-0110

11

S369X

ØD (mm)

L (mm)

O (mm)

11

108

30

ØB

ØD

SS316

SIZE (mm)

(mm)

6369-1111

11

16

(1)

B.L. (kgs)

125

(mm)

L (mm)

O (mm)

11

108

30

1,850 (1)

B.L. (kgs)

125

1,850

BASIC

S369, S369X

S369X Locking snaps (angled hook with eye end)

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

Piece per carton.

* For more information on symbols, refer to page XVI.

47

SERIES

B

© Copyright 2010 by Strudyna Thailand

L


Hooks & Snaps O L

O B

B

S249 Eye snaps (fixed ring)

S249, S251 Technical Data

item no.

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Production : S249 - Snap - Cast S251 - Snap - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Eye snaps (fixed ring) are designed for application where a rigid eye end to be strap on to leather belt and a wide open hook for easy insertion is required. Eye snaps (swivel end) are designed specificly for flexibility in use in multiple settings.

SS304

SS316

SIZE (mm)

ØB (mm)

L (mm)

O (mm)

4249-0000 4249-0001 4249-0002 4249-0003

6249-0000 6249-0001 6249-0002 6249-0003

0 1 2 3

10 16 19 19

53.5 73.0 81.5 98.0

10.0 15.0 17.0 23.5

Material

Casting material

S249

item no.

is 1/4 of breaking load.

S251 SS304

SS316

SIZE (mm)

ØB (mm)

L (mm)

O (mm)

4251-0000 4251-0001 4251-0002 4251-0003

6251-0000 6251-0001 6251-0002 6251-0003

0 1 2 3

16.5 19.5 20.5 19.5

69.0 85.0 99.0 117.5

10.0 13.0 15.5 20.5

Material

Note:(1) Standard safety factor for working load

S251 Eye snaps (swivel end) (1)

B.L. (kgs)

1,000 500 400 200

160 200 300 450 (1)

B.L. (kgs)

600 500 300 200

200 170 250 340

Refer to page IV - class 2 load characteristics

O

O

L

B

48

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

S830 Light eye snaps (swivel end) item no.

S830, S840

Material

Technical Data : AISI304 - DIN 1.4308 : S830 - Snap - Cast S840 - Snap - Cast Surface treatment : "E.P. " (Electro polished) Casting material Production

Field of application

Light eye snaps (swivel end) provides a quick and easy solution to a snap fitting. Swivel eye end provides maximum flexibility. Eye snaps (rectangular swivel end) provides the functionality of a thumb opening with square swivels for knitting of synthetic or leather straps.

item no. Material

S251

S840 Eye snaps (rectangular swivel end)

SS304

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

4830-0308 4830-0102 4830-0508 4830-0304

3/8" 1/2" 5/8" 3/4"

11.0 13.5 17.0 20.5

55 70 83 89

9.0 11.5 14.0 14.0

SS304

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

4840-0102

1/2''

13

60

6.0

S840

(1)

B.L. (kgs)

1,000 600 500 450

180 240 325 325 (1)

B.L. (kgs)

600

50

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

Light eye snap (swivel end)

Piece per carton.

* For more information on symbols, refer to page XVI.


Hooks & Snaps O

O

L

B

B S5014 Tiger snaps (rectangular swivel end)

S5014, S5013

item no.

Technical Data

Material

Casting material

: AISI304- DIN 1.4308/ AISI316- DIN 1.4408 Production : S5014 - Snap - Cast S5013 - Snap - Cast Surface treatment : "E.P. " (Electro polished)

SS304

SS316

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

4501-4001

6501-4001

1''

25.4

70

12

item no.

Tiger snaps (rectangular swivel end) combines the maximum opening of hook with rectangular swivel for knitting of leather or synthetic straps. Tiger snaps (swivel end) provides the maximum opening of snaps during operation. Swivel end extends it's flexibility.

S5013 SS304

SS316

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

4501-3102 4501-3508

6501-3102 6501-3508

1/2'' 5/8"

13.0 16.8

66.5 69.5

12 12

Material

Field of application

S5014

S5013 Tiger snaps (swivel end)

(1)

B.L. (kgs)

500

200 (1)

B.L. (kgs)

600 500

200 200

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

O

O L

: AISI316 - DIN 1.4408 : S3142 - Snap - Cast S333 - Snap - Cast S3143 - Snap - Cast S334 - Snap - Cast Surface treatment : "E.P. " (Electro polished)

Material

Casting material Production

Field of application Bull snaps (eye swivel end) are designed for heavy duty snap use. The latch is opened outwards with two finger operation. Large swivel allows extra assembly of chains and hooks to it's swivel. Bull snaps (rectangular swivel end) provides the extra heavy duty application of a snap, with two finger operation latch pulled outward for accidental pushing. Square swivels provides for knitting of leather or synthetic belts.

Note:

(2)

S3142 SS316

SIZE (inch)

6314-2874 7/8" X 4" item no. Material

item no. Material

S333

Material

L (mm)

O (mm)

25.5

100

17

ØB

O (mm)

SS316

SIZE (inch)

(mm)

L (mm)

6333-0105

1" X 5"

30

130

20

SIZE (inch)

ØB (mm)

L (mm)

O (mm)

29

130

20

ØB (mm)

L (mm)

O (mm)

29

120

20

S3143 SS316

6314-3118 1.1/8" X 4" item no.

ØB (mm)

S334 SS316

SIZE (inch)

6334-1185 1.1/8" X 5"

(1)

B.L. (kgs)

180

650 (1)

B.L. (kgs)

100

1,080 (1)

B.L. (kgs)

100

1,080 (1)

B.L. (kgs)

100

1,080

Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 2 load characteristics

Piece per carton.

* For more information on symbols, refer to page 17.

49

SERIES

Technical Data

item no.

BASIC

S3142, S333, S3143, S334

© Copyright 2010 by Strudyna Thailand

B

B

S3143, S334 Bull snaps (rectangular swivel end)

S3142, S333 Bull snaps (eye swivel end)


Hooks & Snaps L

L

R1

SF268 S-hook (type 1) item no.

SF268

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF268 - Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application S-Hooks (type 1) are designed for a quick and easy setup for poster or lables to be hanged from a fixed wire rope or pipe.

item no.

SF875

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF875 - Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application S-hooks (type 2) are designed for application where a quick and easy fitting is needed for hanging of a poster or label in a fixed wire.

50

item no. Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF880 - Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application S-hooks (type 3) are designed for quick and easy hanging of poster or pictures onto a horizontal pole or wire.

R

SF875 S-hook (type 2)

SF880 S-hook (type 3)

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

Ø R1 (mm)

4268-0002 4268-0003 4268-0004 4268-0005 4268-0006 4268-0008 4268-1085

02019 03030 04036 05043 06050 08067 10085

2 3 4 5 6 8 10

19 30 36 43 50 67 85

3.75 4.50 6.00 7.00 7.50 10.00 12.50

3.75 8.00 9.50 10.50 12.50 16.50 20.50

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

Ø R1 (mm)

4875-0400 4875-0005 4875-0006 4875-0008 4875-0009 4875-0010 4875-0012

4 5 6 8 9 10 12

4 5 6 8 9 10 12

40 50 60 75 85 100 120

4.0 4.5 6.0 8.0 9.0 9.0 11.0

4.0 4.5 6.0 8.0 9.0 9.0 11.0

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

Ø R1 (mm)

4880-6080 4880-6120 4880-6160 4880-6200 4880-6240

6080 6120 6160 6200 6240

6 6 6 6 6

80 120 160 200 240

12.5 17.5 22.5 22.5 22.5

12.5 17.5 22.5 22.5 22.5

SF875

SF880

(1)

B.L. (kgs)

15,000 2,500 1,500 1,300 800 400 200

15 25 50 120 140 250 435

(1)

B.L. (kgs)

1,200 900 600 300 200 150 100

60 150 200 400 650 800 1,150

(1)

B.L. (kgs)

600 250 150 150 130

150 100 90 80 80

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

SF880

SF268

R1

R1

R

R

D

D

L

type 3) S-hook (

Piece per carton.

Window Display

* For more information on symbols, refer to page 17.


Hooks & Snaps R

L

R

R

D

D

D

SFJ J-hook

SFU U-bar Hammer

SFU

item no. Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SFU - Bar - Forged Surface treatment : "E.P. " (Electro polished)

SFU

SFH Closed eye bar

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

4000-0032 4000-0033 4000-0034

6100 6150 6200

6 6 6

100 150 200

10.5 10.5 10.5

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

4000-6150 4000-6200 4000-6250 4000-6300

6150 6200 6250 6300

6 6 6 6

150 200 250 300

10.5 10.5 10.5 10.5

SS304

SIZE (mm)

ØD (mm)

L (mm)

ØR (mm)

4006-0150 4006-0200 4006-0250 4006-0300 4009-0150 4009-0200 4009-0300 4013-0300 4013-0450 4331-3500 4013-0600 4013-1000

06150 06200 06250 06300 09150 09200 09300 13300 13450 13500 13600 131000

6 6 6 6 9 9 9 13 13 13 13 13

150 200 250 300 150 200 300 300 450 500 600 1,000

10.50 10.50 10.50 10.50 10.25 10.25 10.25 12.50 12.50 12.50 12.50 12.50

500 400 300

Field of application U-bars are designed for insertion into soil or wood by hammering, this is used to secure a tent or other objects in place. item no. Hammer

Material

SFJ Technical Data Forging material : AISI304 - DIN 1.4301 Production : SFJ - Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application

SFJ

500 400 300 300

J - Hooks are designed to be inserted into soil or wood to hold a string of a camping tent or an object in place.

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SFH - Bar - Forged Surface treatment : "E.P. " (Electro polished)

Field of application

SFH

600 450 300 250 250 200 150 50 60 50 40 25

BASIC

Closed eye bars are designed to be inserted with hammer into soil or wood to withhold the strings of a tent or other objects in place.

Material

© Copyright 2010 by Strudyna Thailand

SFH

Piece per carton.

* For more information on symbols, refer to page 17.

51

SERIES

item no. Hammer


Terminals & Turnbuckles M

L1

S311EE Frame turnbuckle, eye and eye

S311EE

item no.

Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S311EE - Frame - Cast Eye - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle, eye and eye provides tensioning of two loose open ends.

SS304

SS316

(mm)

4311-2205 4311-2206 4311-2208 4311-2210 4311-2212 4311-2216 4311-0020 4311-0005 4311-0006 4311-0008 4311-0009 4311-0012 4311-0016 4311-0019

6311-2205 6311-2206 6311-2208 6311-2210 6311-2212 6311-2216 6311-0020 6311-0005 6311-0006 6311-0008 6311-0009 6311-0012 6311-0016 6311-0019

5.0 6.0 8.0 10.0 12.0 16.0 20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

124 154 210 257 325 390 510 124 154 210 257 325 390 510

70 90 120 150 200 250 300 70 90 120 150 200 250 300

M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

L

M (thread)

Technical Data

Š Copyright 2010 by Strudyna Thailand

SERIES

BASIC 52

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4308 Forging material : AISI304 - DIN 1.4401/ AISI316 - DIN 1.4301 Production : S311HE - Frame - Cast Hook/Eye - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle, hook and eye provides tensioning of one fixed end with hook and one open end.

SS304

SS316

(mm)

L1 (mm)

4311-3304 4311-1045 4311-3305 4311-3306 4311-3308 4311-3310 4311-3312 4311-3316 4311-3320 4311-1005 4311-1006 4311-1008 4311-1009 4311-1012 4311-1016 4311-1019

6311-3304 6311-1045 6311-3305 6311-3306 6311-3308 6311-3310 6311-3312 6311-3316 6311-3320 6311-1005 6311-1006 6311-1008 6311-1009 6311-1012 6311-1016 6311-1019

4.0 4.5 5.0 6.0 8.0 10.0 12.0 16.0 20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

103 98 124 162 210 256 330 400 495 124 162 210 256 330 400 495

60 45 70 90 120 150 200 250 300 70 90 120 150 200 250 300

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

L

item no.

S311HH Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S311HH - Frame - Cast Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle, hook and hook provides simple tensioning of two closed ends.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

Piece per carton.

Material

S311HE

M (thread)

SIZE (mm)

Material

Casting material

L

L1 (mm)

item no.

S311HE

S311HH Frame turnbuckle, hook and hook

S311HE Frame turnbuckle, hook and eye SIZE (mm)

Material

Technical Data

S311EE

L

S311HH SS304

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

4311-4405 4311-4406 4311-4408 4311-4410 4311-4412 4311-4416 4311-4420 4311-1105 4311-1106 4311-1108 4311-1109 4311-1112 4311-1116 4311-1119

6311-4405 6311-4406 6311-4408 6311-4410 6311-4412 6311-4416 6311-4420 6311-1105 6311-1106 6311-1108 6311-1109 6311-1112 6311-1116 6311-1119

5.0 6.0 8.0 10.0 12.0 16.0 20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

124 170 208 266 335 415 485 124 170 208 266 335 415 485

70 90 120 150 200 250 300 70 90 120 150 200 250 300

M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

(1)

B.L. (kgs)

500 250 150 n/a n/a n/a n/a n/a 250 n/a n/a 50 n/a n/a

680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500

(1)

B.L. (kgs)

1,000 1,000 500 250 150 100 50 20 15 500 250 150 100 50 12 15

100 130 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500

(1)

B.L. (kgs)

500 250 150 100 50 20 15 500 250 150 100 50 20 15

130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles M

L1

S311NEE Frame turnbuckle with nut, eye and eye item no.

S311NEE

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311NEE - Frame - Cast Eye - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle with nut, eye and eye provides a locking function after the fittings are securely tightened.

S311NEE

L

S311NHH Frame turnbuckle with nut, hook and hook

S311NHE Frame turnbuckle with nut, hook and eye L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6311-6704 6311-7005 6311-7006 6311-7008 6311-7010 6311-7012 6311-7016 6311-7020 6311-6705 6311-6706 6311-6708 6311-6709 6322-6712 6311-6716 6311-6719

4 5 6 8 10 12 16 20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

102 124 154 210 257 325 390 510 124 154 210 257 325 390 510

60 70 90 120 150 200 250 300 70 90 120 150 200 250 300

M4 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6311-6804 6311-7105 6311-7106 6311-7108 6311-7110 6311-7112 6311-7116 6311-7120 6311-6805 6311-6806 6311-6808 6311-6809 6311-6812 6311-6816 6311-6819

4 5 6 8 10 12 16 20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

103 124 162 210 256 330 400 495 124 162 210 256 330 400 495

60 70 90 120 150 200 250 300 70 90 120 150 200 250 300

M4 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6311-6904 6311-7205 6311-7206 6311-7208 6311-7210 6311-7212 6311-7216 6311-7220 6311-6905 6311-3906 6311-6908 6311-6909 6311-6912 6311-6916 6311-6919

4 5 6 8 10 12 16 20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

103 124 170 208 266 335 415 485 124 170 208 266 335 415 485

60 70 90 120 150 200 250 300 70 90 120 150 200 250 300

M4 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

(1)

B.L. (kgs)

1,000 500 250 150 100 50 25 15 500 250 150 100 50 15 15

475 680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500

Frame turnbuckle with nut, eye and eye

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311NHE - Frame - Cast Hook/Eye - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle with nut, hook and eye provides extra locking function after turnbuckle has been tightened.

item no.

S311NHH Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311NHH - Frame - Cast Hook - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckle with nut, hook and hook provides extra locking function after the turnbuckle has been securely tightened.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

Piece per carton.

Material

S311NHH

(1)

B.L. (kgs)

1,000 500 250 150 100 50 25 15 500 250 150 100 50 20 15

100 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500

Š Copyright 2010 by Strudyna Thailand

Technical T h i l Data D

S311NHE

(1)

B.L. (kgs)

1,000 500 250 150 100 50 20 15 500 150 150 100 50 20 15

100 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500

* For more information on symbols, refer to page 17.

53

SERIES

S311NHE

Material

BASIC

item no.


Terminals & Turnbuckles M

L

L

L1

L

M

M

L1

S311JE Frame turnbuckle, jaw and eye

S311JE Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311JE - Frame - Cast Jaw - Forged Eye - Welded Accessory - See chart Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Frame turnbuckles, jaw and eye are designed to tighten two loose end while turning of the frame body itself.

Note:(1) Standard safety factor for working load

S311JE

L1

S311JJ Frame turnbuckle, jaw and jaw (metric thread) L

S312 Frame turnbuckle, jaw and jaw (inch thread) (1)

SS316

SIZE (mm/inch)

(mm)

L1 (mm)

M (thread)

Accessory

6311-6205 6311-6206 6311-6208 6311-6210 6311-6212 6311-6238 6311-6216 6311-6220

5 6 8 10 12 3/8" 16 20

120 145 190 235 310 235 360 473

70 90 120 150 200 150 250 300

M5 M6 M8 M10 M12 3/8" M16 M20

Ring Ring Ring Ring Ring Ring Cotter pin Cotter pin

SIZE (mm)

L

SS316

(mm)

L1 (mm)

M (thread)

Accessory

6311-6405 6311-6406 6311-6408 6311-6310 6311-6312 6311-6314 6311-6316 6311-7719

5 6 8 10 12 14 16 20

114 137 179 220 296 275 328 436

70 90 120 150 200 170 200 300

M5 M6 M8 M10 M12 M14 M16 M20

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin

SIZE (inch)

L (mm)

L1 (mm)

M (thread)

Accessory

114 137 179 220 296 296 328 436

70 90 120 150 200 200 200 300

3/16" 1/4" 5/16" 3/8" 1/2" 1/2"UNC 5/8" 3/4"

Ring Ring Ring Ring Ring Ring Cotter pin Cotter pin

B.L. (kgs)

450 250 150 80 40 80 15 n/a

680 1,500 2,300 3,100 4,400 2,500 8,000 11,000

is 1/4 of breaking load.

Refer to page IV- class 1 load characteristics item no.

S311JJ

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311JJ - Frame - Cast Jaw - Forged Accessory - See chart Surface treatment : "E.P. " (Electro polished)

Field of application

54

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Frame turnbuckles, jaw and jaw (metric thread) are designed to tighten two loose end while turning of the frame body itself. item no.

S312

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S312 - Frame - Cast Jaw - Forged Accessory - See chart Surface treatment : "E.P. " (Electro polished)

Field of application Frame turnbuckles, jaw and jaw (inch thread) are specially designed for the U.S. market.

S311JJ

S312 SS316

6312-0005 3/16" 6312-0006 1/4" 6312-0008 5/16" 6312-0010 3/8" 6312-0012 1/2" 6312-0013 1/2"UNC 6312-0016 5/8" 6312-0119 3/4"

(2)

B.L. (kgs)

500 300 150 80 50 25 15 10

750 1,400 2,200 3,450 5,000 6,400 8,000 10,500

(2)

B.L. (kgs)

500 300 150 80 50 40 15 10

750 1,400 2,200 3,450 5,000 5,000 8,000 10,500

Note:(2) Standard safetyy factor for working load is 1/4 of breaking ng load.

Refer to page IV V - class 3 load characteristics

Pipe turnbuckle

Piece per carton.

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles L1

M

SF312PEE Pipe turnbuckle, eye and eye

SF312PHE Pipe turnbuckle, hook and eye

L

L

SF312PEE

M

Technical Data

L1

Forging material : AISI316 - DIN 1.4401 Production : SF312PEE - Eye - Welded Surface treatment : "M.F. " (Matte finished)

Field of application

item no.

Refer to page IV - class 2 load characteristics

Material

item no.

SF312PHE

Material

Technical Data

Forging material : AISI316 - DIN 1.4401 Production : SF312PHE - Hook - Forged Eye - Welded Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, hook and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

item no.

SF312PHH

Material

Technical Data

Forging material : AISI316 - DIN 1.4401 Production : SF312PHH - Hook - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, hook and hook are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

item no.

SF312PJE Technical Data

Forging material : AISI316 - DIN 1.4401 Production : SF312PJE - Jaw - Forged Eye - Welded Accessory - See chart Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, jaw and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

Material

SF312PEE

L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6312-3105 6312-3106 6312-3108 6312-3110 6312-3112 6312-3116 6312-3120

5 6 8 10 12 16 20

137 164 191 235 280 360 407

80 90 105 125 150 190 210

M5 M6 M8 M10 M12 M16 M20

SIZE (mm)

L

SS316

(mm)

L1 (mm)

M (thread)

6312-3205 6312-3206 6312-3208 6312-3210 6312-3212 6312-1416 6312-0020

5 6 8 10 12 16 19

137 164 196 235 288 362 399

80 90 105 125 150 190 210

M5 M6 M8 M10 M12 M16 M20

L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6312-3305 6312-3306 6312-3308 6312-3310 6312-3312 6312-0021 6312-0022

5 6 8 10 12 16 20

134.5 168.0 190.0 230.0 288.0 357.0 395.0

80 90 105 125 150 190 210

M5 M6 M8 M10 M12 M16 M20

SF312PHE

SF312PHH

SF312PJE SS316

SIZE (mm)

6312-3405 6312-3406 6312-3408 6312-3410 6312-3412 6312-3416 6312-3420

5 6 8 10 12 16 20

L

(1)

B.L. (kgs)

600 300 200 100 50 25 15

680 1,500 2,300 3,100 4,400 8,000 10,000 (1)

B.L. (kgs)

600 300 175 100 50 20 15

130 350 650 800 1,400 2,400 3,500

Š Copyright 2010 by Strudyna Thailand

is 1/4 of breaking load.

SF312PJE Pipe turnbuckle, jaw and eye

(1)

B.L. (kgs)

600 250 200 100 50 20 15

130 350 650 800 1,400 2,400 3,500

(1)

(mm)

L1 (mm)

M (thread)

Accessory

119 146 176 209 260 299 383

80 90 105 125 150 190 210

M5 M6 M8 M10 M12 M16 M20

Ring Ring Ring Ring Ring Cotter pin Cotter pin

B.L. (kgs)

n/a 500 300 150 60 n/a n/a

680 1,400 2,200 3,100 4,400 8,000 10,000

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

Piece per carton.

* For more information on symbols, refer to page 17.

55

SERIES

Note:(1) Standard safety factor for working load

SF312PHH Pipe turnbuckle, hook and hook

BASIC

Pipe turnbuckles, eye and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.


Terminals & Turnbuckles L1

L1 M

M

L

Jaw

SF312P Pipe turnbuckle, jaw and jaw

SF312P

Technical Data

item no.

Forging material : AISI316 - DIN 1.4401 Production : SF312P - Jaw - Forged Accessory - See chart Surface treatment : "M.F. " (Matte finished)

SF312P

Material

Field of application Pipe turnbuckles, jaw and jaw are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 3 load characteristics item no.

Jaw

SF312/7

F F F F F F F F

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF312/7 - Eye/Jaw - Forged Accessory - See chart Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, jaw and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

SF3127P Pipe turnbuckle, eye and eye

SF312/7 Pipe turnbuckle, jaw and eye L

SS316

SIZE (mm)

(mm)

L1 (mm)

6312-0505 6312-0506 6312-0508 6312-0510 6312-0512 6312-0514 6312-0616 6312-9220 6312-0524

5 6 8 10 12 14 16 20 24

115 142 160 200 245 280 304 350 445

80 90 105 125 150 165 190 210 250

L

SS316

SIZE (mm)

(mm)

L1 (mm)

6312-7005 6312-7006 6312-7008 6312-7010 6312-7012 6312-7014 6312-7016 6312-7020

5 6 8 10 12 14 16 20

130 135 165 200 240 270 295 340

80 90 105 125 150 165 190 210

SF312/7

Material

L

L

M (thread) Accessory

M5 M6 M8 M10 M12 M14 M16 M20 M24

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin Cotter pin

P B C

500 250 150 100 50 35 20 12 8

4 4 4 4 n/a n/a n/a n/a n/a

M (thread) Accessory

M5 M6 M8 M10 M12 M14 M16 M20

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin

P B C

500 300 150 100 50 35 20 12

4 4 4 4 n/a n/a n/a n/a

(1)

B.L. (kgs)

750 1,400 2,200 3,450 5,000 6,400 8,000 10,500 14,500 (2)

B.L. (kgs)

750 1,400 2,200 3,450 5,000 6,400 8,000 10,500

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

56

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

item no.

SF3127P

Material

SF3127P Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3127P - Eye - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, eye and eye are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

Note: ote:(3) Sta Standard da d sa safety ety factor acto for o working o g load oad

F F F F F F F F

SS316

SIZE (mm)

6312-7705 6312-7706 6312-7708 6312-7710 6312-7712 6312-7714 6312-7716 6312-7720

5 6 8 10 12 14 16 20

L (mm)

L1 (mm)

M (thread)

125 135 165 185 225 255 275 338

80 90 105 125 150 165 190 210

M5 M6 M8 M10 M12 M14 M16 M20

(3)

B.L. (kgs)

1,000 400 200 100 80 35 25 15

750 1,000 2,200 3,000 5,000 6,100 8,000 10,500

is 1/4 of breaking load.

Refer to page IV - class 2 load characteristics

w le jaw and ja Pipe turnbuck

Piece per carton.

P B C

Plastic Back Card.

F

Upset Forging

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles L1

L

M

M

L1

L

L

S3125/7 Pipe turnbuckle, eye and toggle

Toggle

S3125/7

item no.

Technical Data

Material

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S3125/7 - Eye - Forged Toggle - Cast Accessory - See chart Surface treatment : "M.F. " (Matte finished)

S3125/7 F F F F F F F F

Field of application Pipe turnbuckles, eye and toggle are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

Note:(1) Standard safety factor for working load

M

S3125 Pipe turnbuckle, toggle and toggle

S312/5 Pipe turnbuckle, toggle and jaw L

SS316

SIZE (mm)

(mm)

L1 (mm)

6312-5805 6312-5806 6312-5808 6312-5810 6312-5812 6312-5714 6312-5716 6312-5120

5 6 8 10 12 14 16 20

135 140 175 210 245 280 310 367

80 90 105 125 150 165 190 210

L

SS316

SIZE (mm/inch)

(mm)

L1 (mm)

6312-4005 6312-4006 6312-4008 6312-4010 6312-4012 6312-4014 6312-1054 6312-4020 6312-4613 6312-4401 6312-4615 6312-4803 6312-4201 6312-4805

5 6 8 10 12 14 16 20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8"

124 150 170 205 265 280 335 375 124 150 170 205 265 335

80 90 105 125 150 165 190 210 80 90 105 125 150 190

L

SS316

SIZE (mm)

6312-1052 6312-5006 6312-5008 6312-5010 6312-5012 6312-1061 6312-5016 6312-5020

5 6 8 10 12 14 16 20

M (thread) Accessory

M5 M6 M8 M10 M12 M14 M16 M20

L1

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin

500 250 150 100 50 35 25 15

(2)

P B C

B.L. (kgs)

4 4 4 4 n/a n/a n/a n/a

500 900 1,650 2,500 3,700 5,000 6,950 9,600

P B C

B.L. (kgs)

4 4 4 4 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

500 900 1,650 2,500 3,700 5,000 6,950 9,600 500 900 1,650 2,500 3,700 6,950

is 1/4 of breaking load.

Refer to page IV - class 1 load characteristics

S312/5 Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S312/5 -Swivel toggle - Cast Jaw - Forged Accessory - See chart Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, toggle and jaw are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

S312/5

M (thread) Accessory

M5 M6 M8 M10 M12 M14 M16 M20 3/16" 1/4" 5/16" 3/8"' 1/2" 5/8"

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin Ring Ring Ring Ring Ring Cotter pin

350 200 150 75 35 25 15 12 350 200 100 75 35 15

(2)

Š Copyright 2010 by Strudyna Thailand

Material

Pipe turnbuckle toggle and toggle

Material

S3125 Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S3125 -Toggle - Cast Accessory - See chart Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, toggle and toggle are designed for circular appearance of turnbuckle while concealing the threads within the pipe for aesthetic reasons.

S3125

(2)

(mm)

L1 (mm)

M (thread)

Accessory

131 148 180 220 258 295 335 385

80 90 105 125 150 165 190 210

M5 M6 M8 M10 M12 M14 M16 M20

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin

B.L. (kgs)

350 200 140 75 35 25 15 10

500 900 1,650 2,500 3,700 5,000 6,950 9,600

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 3 load characteristics

Piece per carton.

P B C

Plastic Back Card.

F

Upset Forging

* For more information on symbols, refer to page 17.

BASIC

item no. Toggle

57

SERIES

item no.

Toggle


Terminals & Turnbuckles

M

L1

L

O

D SF3121/7 Pipe turnbuckle, eye and swage stud

item no.

SF3121/7

Material

SF3121/7

F F F F F F F F

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3121/7 - Eye - Forged Terminal - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, eye and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swaging machine.

L

OD Dia Ø Cable

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

(mm)

(mm)

6312-1063 6312-1055 6312-1051 6312-1056 6312-1057 6312-1058 6312-1059 6312-1785

5 6 8 10 12 14 16 20

156 163 200 238 284 312 360 410

80 90 105 125 150 165 190 210

M5 M6 M8 M10 M12 M14 M16 M20

5.5 6.3 7.5 9.1 12.5 14.3 16.1 17.8

2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0

M

600 400 200 100 50 50 35 15

(1)

P B C

B.L. (kgs)

4 4 4 4 n/a n/a n/a n/a

600 1,000 1,400 2,200 4,000 5,400 6,500 8,500

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

L1

Refer to page IV - class 4 load characteristics

L

O

D

O

D S3121P, SF3121P Pipe turnbuckle, jaw and swage stud

Pipe turnbuckle, jaw and swage stud item no.

S3121P

Material

S3121P, SF3121P

© Copyright 2010 by Strudyna Thailand

SERIES

BASIC 58

Field of application Pipe turnbuckles, jaw and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swaging machine.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

Piece per carton.

P B C

SIZE (mm/inch)

L (mm)

6312-1415 10*M20 415 6312-1068 1/2"*3/4"UNC 462

Technical Data Forging material : AISI316 - DIN 1.4401 Production : S3121P - Jaw - Forged Terminal - Forged Nut - Cast Accessory - See chart SF3121P - Jaw/Nut - Forged Terminal - Forged Accessory - See chart Surface treatment : "M.F. " (Matte finished)

SS316

item no. Material

SF3121P SS316

6312-1017 6312-1016 6312-1018 6312-1009 6312-1010 6312-1011 6312-1070 6312-1071 2312-1068 6312-1122 6312-1050 6312-1064 2312-1072 6312-1098 2312-1073 2312-1074 6312-1455 2312-1461 6312-1065 6312-1007 6312-1008 6312-6028 6312-1023 6312-1015 6312-1027 6312-1006 6312-1040 6312-1041

Plastic Back Card.

OD

L1 (mm)

M (thread)

(mm)

210 210

M20 3/4"UNC

17.8 21.4

B.L. (kgs)

Cotter pin Ring

600 1,000

10 1/2"

SIZE L L1 M OD Dia Ø Cable (mm/inch) (mm) (mm) (thread) (mm) (mm) Accessory

5 150 6 170 8 205 10 240 12 295 14 325 16 370 20 405 2*M5 151.5 3*M5 142 4*M6 185 5*M8 210 7*M12 297.25 8*M12 303 8*M14 328 10*M16 380 12*M20 414 16*M24 610 3/32"*M5 155 1/8"*M5 156 1/8"*M6 170 5/32"*M6 178 5/32"*M8 205 3/16"*M8 205 3/16"*M10 240 1/4"*M10 247 1/4"*M12 295 5/16"*M12 310

F

Upset Forging

80 90 105 125 150 165 190 210 80 80 90 105 150 150 165 190 210 250 80 80 90 90 105 105 125 125 150 150

M5 M6 M8 M10 M12 M14 M16 M20 M5 M5 M6 M8 M12 M12 M14 M16 M20 M24 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12

5.5 6.3 7.5 9.1 12.5 14.3 16.1 17.8 5.5 6.3 7.5 9.1 14.3 16.1 16.1 17.8 21.4 28.2 5.5 6.3 6.3 7.5 7.5 9.1 9.1 12.5 12.5 16.1

2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 2.5 3.0 4.0 5.0 7.0 8.0 8.0 10.0 12.0 16.0 3/32" 1/8" 1/8" 5/32" 5/32" 3/16" 3/16" 1/4" 1/4" 5/16"

(1)

Dia Ø Cable (mm) Accessory

Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin Ring Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin Cotter pin Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring

P B C

600 350 200 100 50 30 30 15 600 600 350 200 n/a 40 n/a n/a n/a n/a 600 600 350 350 500 200 125 75 50 40

4 4 4 4 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(1)

B.L. (kgs)

600 1,000 1,400 2,200 4,000 5,400 6,500 8,500 600 600 1,000 1,400 4,500 4,500 6,000 8,200 12,500 18,500 600 600 1,000 1,000 1,400 1,400 2,200 2,200 4,000 4,000

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles L1 L M

M

L

L

L1

M

L1

O D

S3121/5

Material

Technical Data

SS316

6312-5047 6312-1044 6312-1076 6312-1045 6312-1077 6312-1035 6312-1036 6312-1037 6312-1075 6312-1038 6312-1039 6312-1074 6312-1053 6312-1002 6312-1029 6312-1004 6312-1003 6312-1030 6312-1001 6312-1032 6312-1031

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S3121/5 - Swivel toggle - Cast Terminal - Forged Accessory - See chart Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, toggle and swage stud are designed for tightening of one loose end to a wire rope. The wire rope must be swaged properly with a swaging machine.

Turnbuckle

item no. Material

S312P/4

S3121/5

Technical Data

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S312P/4 - Jaw - Forged Swageless terminal - Cast Accessory - See chart Surface treatment : "M.F. " (Matte finished)

S312P/4

SIZE L L1 M OD Dia Ă˜ Cable (mm/inch) (mm) (mm) (thread) (mm) (mm) Accessory

2.5 3 4 4 5 5 6 7 8 8 10 12 3/32" 1/8" 5/32" 5/32" 3/16" 3/16" 1/4" 1/4" 5/16"

SS316

SIZE (mm)

6312-4108 6312-4110 6312-4112 6312-4168 6312-4116

4 5 6 8 10

SS316

SIZE (mm)

6312-5408 6312-5410 6312-5412 6312-5417 6312-5416

4 5 6 8 10

155 172 171 210 216 246 296 328 310 386 422 416 156 180 191 211 216 244 260 308 327

80 90 90 105 105 125 150 165 150 190 210 190 80 90 90 105 105 125 125 150 150

L

M5 M6 M6 M8 M8 M10 M12 M14 M12 M16 M20 M16 M5 M6 M6 M8 M8 M10 M10 M12 M12

5.5 6.3 7.5 7.5 9.1 9.1 12.5 14.3 16.1 16.1 17.8 17.8 5.5 6.3 7.5 7.5 9.1 9.1 12.5 12.5 16.1

2.5 3.0 4.0 4.0 5.0 5.0 6.0 7.0 8.0 8.0 10.0 10.0 3/32" 1/8" 5/32" 5/32" 3/16" 3/16" 1/4" 1/4" 5/16"

Ring Ring Ring Ring Ring Ring Ring Cotter pin Ring Cotter pin Cotter pin Cotter pin Ring Ring Ring Ring Ring Ring Ring Ring Ring

400 250 200 150 125 100 50 40 50 25 15 12 600 250 200 150 150 100 75 50 50

(1)

P B C

B.L. (kgs)

4 4 4 4 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

600 1,000 1,000 1,400 1,400 2,200 4,000 5,400 4,000 6,500 8,500 6,500 600 1,000 1,000 1,400 1,400 2,200 2,200 4,000 4,000

(1)

(mm)

L1 (mm)

M (thread)

Accessory

220 275 330 400 425

105 125 150 190 190

M8 M10 M12 M16 M16

Ring Ring Ring Cotter pin Cotter pin

L (mm)

L1 (mm)

M (thread)

Accessory

230 285 335 415 440

105 125 150 190 190

M8 M10 M12 M16 M16

Ring Ring Ring Cotter pin Cotter pin

B.L. (kgs)

160 80 60 20 15

500 900 1,900 2,200 3,300

Š Copyright 2010 by Strudyna Thailand

item no.

S312 S3125P/4 Pipe turnbuckle, toggle and swageless terminal

Field of application Pipe turnbuckles, jaw and swageless terminal are designed for tightening of one loose end to a wire rope. The wire rope is assembled without a swaging machine.

Material

S3125P/4 Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S3125P/4 - Toggle - Cast Swageless terminal - Cast Accessory - See chart Surface treatment : "M.F. " (Matte finished)

S3125P/4

(1)

B.L. (kgs)

150 80 50 20 20

500 900 1,900 2,200 3,300

Field of application Pipe turnbuckles, toggle and swageless terminal are designed for tightening of one loose end to a wire rope. The wire rope is assembled without a swaging machine.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.

BASIC

item no.

59

SERIES

S312P/4 Pipe turnbuckle, jaw and swageless terminal

S3121/5 Pipe turnbuckle, toggle and swage stud


Terminals & Turnbuckles C

L

A

B S3400 Turnbuckle toggle item no.

S3400 SS316

SIZE (mm)

6340-0005 6340-0006 6340-0008 6340-0010 6340-0012 6340-0014 6340-0016 6340-0020

5 6 8 10 12 14 16 20

Material Removable Pin

S3400 Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S3400 - Toggle - Cast Pin - See chart Surface treatment : "E.P. " (Electro polished)

Field of application

Turnbuckle toggles are designed to be inserted into jaw of any corresponding size of turnbuckle for 180 degrees movement.

ØA (mm)

B (mm)

ØC (mm)

L (mm)

Pin

5 6 8 9 12 14 16 16

5.5 6.5 9.0 11.0 12.0 13.0 15.0 20.0

5.3 6.8 8.5 10.0 13.2 15.0 16.5 16.5

35 41 49 58 78 92 116 158

Forged Forged Forged Forged Forged Forged Forged Cast

1,800 1,000 600 350 150 100 80 30

(1)

P B C

B.L. (kgs)

1 1 2 n/a n/a n/a n/a n/a

1,000 1,250 1,700 3,100 4,650 5,750 8,150 9,400

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

M

M

Refer to page IV - class 1 load characteristics

L

L

L1

L1

SF3121P/MIN Mini pipe turnbuckle, jaw and swage terminal

SF312P/MIN Mini pipe turnbuckle, jaw and jaw

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Mini Type

item no. Material

SF312P/MIN Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF312P/MIN - Jaw - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Mini pipe turnbuckles, jaw and jaw are specially designed to be used in interior where space is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 3 load characteristics stics Mini Type

item no. Material

SF312P/MIN

L

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6312-0804 6312-0805 6312-0806 6312-0808 6312-0810

4 5 6 8 10

84 95 110 122 164

40 50 60 60 80

M4 M5 M6 M8 M10

L

SF3121P/MIN SIZE SS316

(mm)

(mm)

L1 (mm)

M (thread)

6312-1020 6312-1021 6312 1022 6312-1022 6312-1019

5 6 8 10

107 133 147 191

50 60 60 80

M5 M6 M8 M10

1,500 700 300 200 125

800 450 300 100

(1)

P B C

B.L. (kgs)

3 3 3 n/a n/a

500 750 1,400 2,200 3,450

P B C

B.L. (kgs)

4 4 n/a n/a

750 1,250 2,200 3,450

(1)

SF3121P/MIN Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3121P/MIN - Jaw - Forged rged Terminal - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Mini pipe turnbuckles, jaw and swage terminal are specially designed to be used in interior where space kes is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles. ckles.. or The swage end must use a swaging machine for proper swaging of wire.

Mini pipe turnbuckle

Note:(3) Standard safety factor for working load ad is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics stics

60

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles M

L1 L M

SF3122P/MIN

item no. Material

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3122P/MIN - Pipe - Forged Terminal - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Mini pipe turnbuckles, swage terminal and swage terminal are specially designed to be used in interior where space is minimum. The extra short and slim pipe makes it aesthetically different from standards turnbuckles. The swage end must use a swaging machine for proper swaging of wire.

item no. Material

SF3122P Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3122P - Terminal - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, swage terminal are specially designed for application where two loose end of wire are encountered. Both ends must be properly swaged using a swaging machine. item no. Material

SF3122PK Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3122PK - Stud - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Pipe turnbuckles, stud and stud are specially designed for application where two loose holes are encountered. Both ends must be properly welded to the loose holes.

SF3122P/MIN SIZE

L

SF3122PK Pipe turnbuckle, stud and stud

SS316

(mm)

(mm)

L1 (mm)

6312-2105 6312-2106 6312-2108 6312-2110

5 6 8 10

121 156 168 220

50 60 60 80

M5 M6 M8 M10

3 4 5 6

SIZE (mm/inch)

L

SS316

(mm)

L1 (mm)

M (thread)

Dia Ø Cable (mm)

6312-2005 6312-2006 6312-2008 6312-2010 6312-2012 6312-2014 6312-2016 6312-2480 6312-2181 6312-2315 6312-2143 6312-2511 6312-2385 6312-2213

5 6 8 10 12 14 16 20 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"

180 200 240 275 335 365 435 480 200 248 308 366 431 534

80 90 105 125 150 165 190 210 90 105 125 150 190 210

M5 M6 M8 M10 M12 M14 M16 M20" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4"

2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"

SF3122P

SF3122PK

L

M (thread)

Dia Ø Cable (mm)

SS316

SIZE (mm)

(mm)

L1 (mm)

M (thread)

6312-2206 6312-2208 6312-2210 6312-2212 6312-2214 6312-2216 6312-2220

6 8 10 12 14 16 20

200 225 255 280 300 340 370

90 105 125 150 165 190 210

M6 M8 M10 M12 M14 M16 M20

(1)

B.L. (kgs)

800 350 250 125

1,000 1,250 1,250 2,350 (1)

B.L. (kgs)

700 350 250 120 60 40 20 20 350 200 75 40 30 15

600 1,000 1,400 2,200 4,000 5,400 6,500 8,500 1,000 1,400 2,200 4,500 6,500 8,500 (1)

B.L. (kgs)

250 250 100 60 n/a 35 20

1,400 2,200 3,450 5,000 6,400 8,000 10,500

© Copyright 2010 by Strudyna Thailand

Mini Type

SF3122P Pipe turnbuckle, swage terminal

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 6 load characteristics

L

S311K Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S311K - Frame - Cast Stud - Forged Surface treatment : "E.P. " (Electro polished)

M

Field of application

is 1/4 of breaking load.

Refer to page 44 - class 21 load characteristics class 21

Piece per carton.

item no. Material

S311K SS316

SIZE (mm)

6311-6605 6311-6606 6311-6608 6311-6410 6311-6412 6311-6414 6311-6516 6311-6520

5 6 8 10 12 14 16 20

L (mm)

L1 (mm)

M (thread)

160 200 240 280 330 310 410 500

70 90 120 150 200 170 250 300

M5 M6 M8 M10 M12 M14 M16 M20

(2)

B.L. (kgs)

500 250 150 100 50 20 20 15

750 1,400 2,200 3,450 5,000 6,400 8,000 10,500

* For more information on symbols, refer to page 17.

BASIC

S311K Frame turnbuckle, stud and stud

Frame turnbuckles, stud and stud are specially designed for an application where the two loose holes are encountered. Both ends must be properly welded to the loose holes.

Note:(2) Standard safety factor for working load

L1

61

SERIES

SF3122P/MIN Mini pipe turnbuckle, swage terminal and swage terminal


Terminals & Turnbuckles M

L2

L

L1

O D SF7801 Right threaded stud terminal

SF7801L Left threaded stud terminal item no.

SF7801L

Material

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF7801L - Stud - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Left threaded stud terminals are designed for loose wire rope ends. Terminals must be properly swaged with swaging machine.

62

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Threaded stud terminal

SF7801L

Dia Ø Cable L L1 L2 (mm) (mm) (mm) (mm)

SS316

SIZE (mm/inch)

6780-1032 6780-1033 6780-1034 6780-1035 6780-1036 6780-1189 6780-1812 6780-1037 6780-1813 6780-1814 6780-1815 2780-1994 6780-1111 6780-1160 6780-1107 6780-1161 6780-1108 6780-1109 6780-1162 6780-1163 6780-1110 6780-1258 6780-1164 6780-1165 6780-1265 6780-1166 6780-1133 6780-1168 6780-1169

2.5*M5 3.0*M6 4.0*M8 5.0*M10 6.0*M12 7.0*M14 8.0*M12 8.0*M16 10*M20 12*M20 14*M22 16*M24 1/8"*M5 1/8"*M5 1/8"*M6 1/8"*1/4"UNC 5/32"*M6 5/32"*M8 5/32"*1/4"UNC 5/32"*5/16"UNC 3/16"*M8 3/16"*1/4"UNC 3/16"*5/16"UNC 3/16"*3/8"UNC 1/4"*5/16"UNC 1/4"*3/8"UNC 5/16"*M16 5/16"*1/2"UNC 3/8"*5/8"UNC

2.5 3.0 4.0 5.0 6.0 7.0 8.0 8.0 10.0 12.0 14.0 16.0 1/8" 1/8" 1/8" 1/8" 5/32" 5/32" 5/32" 5/32" 3/16" 3/16" 3/16" 3/16" 1/4" 1/4" 5/16" 5/16" 3/8"

86 97 115 128 162 178 175 214 225 284 328 387 85 90 90 97 106 118 108 116 124 113 121 132 137 148 175 182 215

35 38 45 52 63 70 80 80 100 144 168 192 38 38 38 37 45 45 48 48 51 53 53 53 65 65 80 83 90

M (thread)

OD

P B C

(mm)

40 M5 5.5 48 M6 6.3 54 M8 7.5 61 M10 9.1 79 M12 12.5 90 M14 14.3 76 M12 16.1 102 M16 16.1 105 M20 17.8 120 M20 21.4 140 M22 25.0 170 M24 28.1 35 M5 6.3 40 M5 6.3 40 M6 6.3 48 1/4"UNC 6.3 48 M6 7.5 60 M8 7.5 48 1/4"UNC 7.5 56 5/16"UNC 7.5 60 M8 9.1 48 1/4"UNC 9.1 56 5/16"UNC 9.1 67 3/8"UNC 9.1 56 5/16"UNC 12.5 67 3/8"UNC 12.5 M16 76 16.1 81 1/2"UNC 16.1 105 5/8"UNC 17.8

2,000 1,000 750 300 150 150 150 100 60 50 n/a 25 1,500 1,500 1,400 1,200 750 750 1,200 900 500 600 600 500 175 300 80 150 90

2 2 3 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(1)

Standard item no. SF7801

SF7801 Forging material : AISI316 - DIN 1.4401 Production : SF7801 - Stud - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Right threaded stud terminals are designed for loose wire rope ends. Terminals must be properly swaged with swaging machine.

Note:(1) See Note : D14

Piece per carton.

SS316

SIZE (mm/inch)

6780-1268 6780-1012 6780-1068 6780-1020 6780-1050 6780-1021 6780-1095 6780-1026 6780-1028 2780-1170 6780-1029 6780-1056 2780-1171 6780-1030 6780-1816 6780-1014 6780-1566 6780-1818 6780-1819 2780-1993 6780-1104 6780-1188 6780-1155

2*M5 2.5*M5 3*M5 3*M6 4*M6 4*M8 5*M8 5*M10 6*M12 7*M12 7*M14 8*M12 8*M14 8*M16 10*M20 10*M20 12*M20 12*M20 14*M22 16*M24 3/32"*M5 1/8"*M5 1/8"*M6

Material

Technical Data

P B C

Plastic Back Card.

Dia Ø Cable L L1 L2 (mm) (mm) (mm) (mm)

2 2.5 3 3 4 4 5 5 6 7 7 8 8 8 10 10 12 12 14 16 3/32" 1/8" 1/8"

86 86 80 97 110 115 128 128 162 168 178 175 190 214 225 225 278 284 328 387 80 90 97

32 35 32 38 45 45 51 52 63 70 70 80 80 80 100 100 144 144 168 192 32 37 37

40 40 40 48 48 54 57 61 79 80 90 76 90 102 105 105 116 120 140 170 40 41 48

OD

M (thread)

(mm)

M5 M5 M5 M6 M6 M8 M8 M10 M12 M12 M14 M12 M14 M16 M16 M20 M20 M20 M22 M24 M5 M5 M6

5.5 5.5 6.3 6.3 7.5 7.5 9.1 9.1 12.5 14.3 14.3 16.1 16.1 16.1 17.8 17.8 21.4 21.4 25.0 28.1 5.5 6.3 6.3

P B C

2,500 2,000 1,400 1,200 750 750 450 300 150 150 150 150 100 100 75 60 50 50 25 25 2,500 1,500 1,400

n/a 1 n/a 2 n/a 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles (1)

Standard SF7801

item no. Material

SF7801 Right g threaded stud terminal (Continue from previous page)

SS316

SIZE (inch)

6780-1144 6780-1152 6780-1153 6780-1154 6780-1180 6780-1219

5/32"*M6 5/32"*M8 3/16"*M10 1/4"*M10 1/4"*M12 5/16"*M12

Dia Ø Cable L (mm) (inch)

5/32" 5/32" 3/16" 1/4" 1/4" 5/16"

108 116 132 148 162 182

OD

L1 (mm)

L2 (mm)

M (thread)

(mm)

48 48 53 65 65 83

48 56 67 67 81 81

M6 M8 M10 M10 M12 M12

7.5 7.5 9.1 12.5 12.5 16.1

L1 (mm)

L2 (mm)

M (thread)

(mm)

21 32 32 37 35 40 45 45 45 51 57 63 64 64 63 64 70 192 240 32 32 35 37 38 38 38 38 35 38 37 38 45 45 45 45 45 48 48 51 51 51 53 51 53 57 53 57.5 64 64 64 64 65 65 63 64 65 64 80 83

40 40 42 41 41 44 57 57 57 58 52 63 63 80 80 80 81 170 180 30 30 40 48 35 40 40 50 40 40 48 50 48 50 57 60 50 48 56 52 60 63 48 52 56 60 67 67 80 85 105 105 56 67 80 80 81 110 76 81

M5 M6 M6 M5 M6 M6 M6 M8 M8 M8 M8 M10 M10 M10 M12 M12 M12 M24 M27 M6 3/16" 3/16" 1/4"UNC M5 M5 M6 M6 3/16" 3/16" 1/4"UNC 1/4"" M6 M8 M8 M8 1/4"UNC 1/4"UNC 5/16"UNC M8 M8 M10 1/4"UNC 5/16" 5/16"UNC 5/16" 3/8"UNC 3/8"UNC M10 M10 M10 M12 5/16"UNC 3/8"UNC 3/8" 3/8" 1/2"UNC 1/2" M16 1/2"UNC

5.5 5.5 5.5 6.3 6.3 7.5 7.5 7.5 7.5 9.1 9.1 12.5 12.5 12.5 12.5 12.5 14.3 28.1 34.5 5.5 5.5 5.5 5.5 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 7.5 7.5 7.5 7.5 7.5 7.5 7.5 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 10.8 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 16.1 16.1

750 750 300 180 170 150

(1)

"Standard terminals are the comon sizes used in assembly with other products such as turnbuckles." "Non-standard terminals are sizes which are rarely used in common settings or product assemblies."

Piece per carton.

6780-1060 6780-1047 6780-1089 6780-1285 6780-1001 6780-1069 6780-1061 6780-1076 6780-1181 6780-1125 6780-1070 6780-1071 6780-1054 6780-1134 6780-1052 6780-1172 6780-1055 6780-1211 6780-1270 6780-1019 6780-1064 6780-1112 6780-1113 6780-1008 6780-1073 6780-1007 6780-1179 6780-1193 6780-1067 6780-1114 6780-1009 6780-1023 6780-1024 6780-1532 6780-1177 6780-1025 6780-1115 6780-1116 6780-1135 6780-1017 6780-1102 6780-1159 6780-1065 6780-1117 6780-1198 6780-1118 6780-1157 6780-1136 6780-1416 6780-1003 6780-1004 6780-1264 6780-1119 6780-1201 6780-1206 6780-1158 6780-1005 6780-1124 6780-1121

SIZE Dia Ø Cable L (mm/inch) (mm/inch) (mm)

2*M5 2*M6 2.5*M6 3*M5 3*M6 4*M6 4*M6 4*M8 4*M8 5*M8 5*M8 6*M10 6*M10 6*M10 6*M12 6*M12 7*M12 16*M24 20*M27 3/32"*M6 3/32"*3/16" 3/32"*3/16" 3/32"*1/4"UNC 1/8"*M5 1/8"*M5 1/8"*M6 1/8"*M6 1/8"*3/16" 1/8"*3/16" 1/8"*1/4"UNC 1/8"*1/4"" 5/32"*M6 5/32"*M8 5/32"*M8 5/32"*M8 5/32"*1/4"UNC 5/32"*1/4"UNC 5/32"*5/16"UNC 3/16"*M8 3/16"*M8 3/16"*M10 3/16"*1/4"UNC 3/16"*5/16" 3/16"*5/16"UNC 3/16"*5/16" 3/16"*3/8"UNC 7/32"*3/8"UNC 1/4"*M10 1/4"*M10 1/4"*M10 1/4"*M12 1/4"*5/16"UNC 1/4"*3/8"UNC 1/4"*3/8" 1/4"*3/8" 1/4"*1/2"UNC 1/4"*1/2" 5/16"*M16 5/16"*1/2"UNC

2.0 2.0 2.5 3.0 3.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 7.0 16.0 20.0 3/32" 3/32" 3/32" 3/32" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 5/32" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 7/32" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 5/16" 5/16"

72 83 85 90 86 95 117 115 118 122 120 135 145 162 155 162 178 387 465 70 70 86 97 85 90 90 100 85 90 97 100 106 108 115 118 108 108 116 116 124 127 113 116 121 128 132 137 157 162 182 182 137 148 153 157 162 187 175 182

OD

2,500 1,400 1,400 1,400 1,200 750 750 750 500 400 500 250 250 150 170 150 150 25 n/a 2,000 1,500 2,500 2,500 1,500 1,500 1,400 1,400 1,400 1,400 1,200 1,200 750 750 750 750 1,000 1,200 900 700 600 300 600 450 600 450 500 300 180 200 180 175 180 300 n/a 250 170 200 80 150

* For more information on symbols, refer to page XVI.

© Copyright 2010 by Strudyna Thailand

Note D14 :

SS316

63

SERIES

Material

BASIC

Non Standard item no. SF7801


Terminals & Turnbuckles B

A

L1 L SF7805/CH Swage toggle (countersunk head pin) item no.

SF7805/CH

Material

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF7805/CH - Toggle - Sheet Terminal - Bar Pin - Bar Surface treatment : "M.F. " (Matte finished)

Field of application

Swage toggles provide the flexibility of a toggle connection with the full swage strength of swaged terminal. Swage toggles are designed to be used where no adjustment are needed.

SF7805/CH SS316

SIZE (mm)

ØA (mm)

B (mm)

L (mm)

L1 (mm)

Dia Ø Cable (mm)

2780-5314 2780-5316 2780-5319 2780-5320 2780-5322 2780-5324 2780-5326 2780-5328 2780-5330 2780-5332 2780-5334 2780-5336

14 16 19 20 22 24 26 28 30 32 34 36

24 27 30 30 33 36 39 42 45 48 52 56

24 27 30 30 33 36 39 42 45 48 52 56

313 352 413 425 462 504 546 588 630 672 714 756

75 85 95 95 105 115 125 135 145 155 165 175

14 16 19 20 22 24 26 28 30 32 34 36

(1)

B.L. (kgs)

18,500 24,000 29,000 29,000 36,000 42,000 51,000 58,000 68,000 77,000 92,000 106,000

B

D

A

64

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

L1

L (Full in) S3121/5CH Turnbuckle toggle (countersunk head pin) & Swage terminal

S3121/5CH Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S3121/5CH - Turebuckle - Pipe / Bar Toggle - Sheet Terminal - Bar Eye - Bar Pin - Bar Surface treatment : "M.F. " (Matte finished)

Field of application

Turnbuckle toggles & Swage terminals are heavy duty class turnbuckles of the Sinox basic range. They provide a solid tensioning platform for cables from 14mm to 36mm with build in 4 times cable size adjustment.

Note:(1) Standard safety factor for working load

item no. Material

S3121/5CH SS316

SIZE (mm)

ØA (mm)

B (mm)

ØD (mm)

6312-1609 6312-1610 6312-1611 6312-1612 6312-1613 6312-1614 6312-1615 6312-1621 6312-1617 6312-1618 6312-1619 6312-1620

14*M24 16*M27 19*M30 20*M30 22*M33 24*M36 26*M39 28*M42 30*M45 32*M48 34*M52 36*M56

24 27 30 30 33 36 39 42 45 48 52 56

24 27 30 30 33 36 39 42 45 48 52 56

45.0 50.8 54.0 54.0 57.0 63.5 70.0 73.0 80.0 85.0 89.1 92.0

in

-

578 657 758 770 860 934 1,006 1,072 1,151 1,223 1,309 1,386

L

out

L1 (mm)

Dia Ø Cable (mm)

690 785 910 922 1,036 1,126 1,214 1,296 1,391 1,479 1,581 1,674

75 85 95 95 105 115 125 135 145 155 165 175

14 16 19 20 22 24 26 28 30 32 34 36

+

(1)

B.L. (kgs)

18,500 24,000 29,000 29,000 36,000 42,000 51,000 58,000 68,000 77,000 92,000 106,000

is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

* For more information on symbols, refer to page XVI.


Terminals & Turnbuckles L

M

Technical Data

item no. Material

Forging material : AISI316 - DIN 1.4401 Production : SF312PBD - Pipe - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Turnbuckle pipes are designed for tightening of two mechanical threaded ends. Fittings can be separately ordered, but dimension of thread must be carefully observed.

item no.

SF312PBD/MIN

Material

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF312PBD/MIN - Pipe - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Mini turnbuckle pipes are designed for tightening of two mechanical threaded ends with minimum space available. Fittings can be separately ordered, but dimension of thread and length of thread must be carefully observed.

SF312PBD

SIZE (mm/inch)

L

SS316

(mm)

M (thread)

6312-0905 6312-0906 6312-0908 6312-0910 6312-0912 6312-0914 6312-0916 6312-0920 2312-0925 2312-0922 6312-0928 6312-9104 6312-9165 6312-0983 6312-9201 6312-0985 6312-9403

M5 M6 M8 M10 M12 M14 M16 M20 M20*3.5 M22*4 M24 1/4"UNC 5/16"UNC 3/8"UNC 1/2"UNC 5/8"UNC 3/4"UNC

80 90 105 125 150 165 190 210 210 270 250 90 105 125 150 190 210

M5 M6 M8 M10 M12 M14 M16 M20 M20 M22 M24 1/4''UNC 5/16"UNC 3/8"UNC 1/2"UNC 5/8"UNC 3/4"UNC

SF312PBD/MIN

SIZE (mm)

(mm)

M (thread)

6312-3004 6312-3005 6312-3006 6312-3008 6312-3010

4 5 6 8 10

40 50 60 60 80

M4 M5 M6 M8 M10

SIZE (mm)

L

SS316

(mm)

M (thread)

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF312PLBD/MIN - Pipe - Forged Surface treatment : "M.F. " (Matte finished)

6312-3504 6312-3505 6312-3506 6312-3508 0 6312-3810

4 5 6 8 10

80 100 120 120 160

M4 M5 M6 M8 M10

Field of application Long mini turnbuckle pipes are designed for tightening of two mechanical threaded ends with extra slim profile. Fittings can be separately ordered, but dimension of thread and length of thread must be carefully observed.

SF312PLBD/MIN

Material

L

SS316

item no.

SF312PLBD/MIN

SF312PLBD/MIN Long mini turnbuckle pipe (1)

B.L. (kgs)

1,500 600 500 250 150 100 80 40 n/a n/a 10 600 400 250 150 70 40

750 1,400 2,400 3,450 5,000 6,500 8,500 13,000 12,800 15,900 21,000 1,400 2,400 3,450 5,000 8,500 13,000 (1)

B.L. (kgs)

3,500 3,000 800 1,000 400

360 750 1,250 2,200 3,400

(1)

B.L. (kgs)

1,500 800 500 300 150

Š Copyright 2010 by Strudyna Thailand

SF312PBD

SF312PBD/MIN Mini turnbuckle pipe

360 750 1,250 2,200 3,400

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

BASIC

Refer to page IV - class 7 load characteristics

Piece per carton.

* For more information on symbols, refer to page XVI.

65

SERIES

SF312PBD Turnbuckle pipe


Terminals & Turnbuckles C

C

C M

M D

L

L

SF78021/L Left threaded eye SF78021/R Right threaded eye

SF7802 SS316

SIZE (mm/inch)

ØC (mm)

ØD (mm)

Dia Ø Cable (mm) (mm)

6780-2202 6780-2225 6780-2203 6780-2204 6780-2205 6780-2306 6780-2208 6780-2210 6780-2212 6780-2733 6780-2718 6780-2753 6780-2731 6780-2714 6780-2561 6780-2381 6780-2712

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

5.5 5.5 6.5 8.5 10.5 13.0 14.5 16.3 19.3 5.5 6.5 8.5 10.5 13.0 14.5 16.3 19.3

5.53 5.53 6.35 7.54 9.12 12.54 16.13 17.85 21.44 5.53 6.35 7.54 9.12 12.54 16.13 17.85 21.44

56.0 56.0 62.0 77.0 87.0 107.5 133.0 159.5 180.0 56.0 62.0 77.0 87.0 107.5 133.0 159.5 180.0

item no. Material

SF7802

F F F F F F F F F F F F F F F F F

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF7802 - Eye - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Eye terminals are designed for swaging of a loose end wire rope. Wire must be properly swaged by using a swaging machine.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 4 load characteristics

item no.

SF78021/L

Material

F F F F F F F F

Eye terminal

SF78021/L, SF78021/R Technical Data

66

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Forging material : AISI316 - DIN 1.4401 Production : SF78021/L - Eye - Forged : SF78021/R - Eye - Forged Surface treatment : "E.P." (Electro polished)

item no.

Field of application

F F F F F F F F

Threaded eyes are designed for assembly with the turnbuckles or the other fittings together. Selection of left hand or right hand thread must be carefully checked.

item no.

SF78021N/L, SF78021N/R Technical Data

F F F F F F F F

Forging material : AISI316 - DIN 1.4401 Production : SF78021N/L - Eye - Forged : SF78021N/R - Eye - Forged Surface treatment : "M.F. " (Matte finished)

Field of application Threaded eyes and nuts are designed to assembly with the turnbuckles or the other fittings.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

item no.

Refer to page IV - class 8 load characteristics

F F F F F F F F Piece per carton.

P B C

SS316

L (mm)

(thread)

6780-2256 6780-2266 6780-2288 6780-2201 6780-2221 6780-2214 6780-2216 6780-2220

M5 M6 M8 M10 M12 M14 M16 M20

5.5 6.5 8.5 10.8 13.0 13.0 14.5 19.5

68.0 68.0 86.5 102.0 122.5 138.0 148.5 185.0

M5 M6 M8 M10 M12 M14 M16 M20

SS316

SIZE (mm)

ØC (mm)

L (mm)

(thread)

6780-2156 6780-2166 6780-2188 6780-2110 6780-2112 6780-2114 6780-2116 6780-2120

M5 M6 M8 M10 M12 M14 M16 M20

5.5 6.5 8.5 10.8 13.0 13.0 14.5 19.5

68.0 68.0 86.5 102.0 122.5 138.0 148.5 185.0

M5 M6 M8 M10 M12 M14 M16 M20

M

1,200 1,500 500 400 250 200 150 70

M

SIZE (mm)

ØC (mm)

L (mm)

(thread)

6780-2157 6780-2161 6780-2181 6780-2111 6782-1012 6782-1014 6782-1016 6782-1020

M5 M6 M8 M10 M12 M14 M16 M20

5.5 6.5 8.5 10.8 13.0 13.0 14.5 19.5

68.0 68.0 86.5 102.0 122.5 138.0 148.5 185.0

M5 M6 M8 M10 M12 M14 M16 M20

SS316

SIZE (mm)

ØC (mm)

L (mm)

(thread)

6780-2150 6780-2160 6780-2108 6780-2101 6780-2121 6782-1114 6782-1116 6782-1120

M5 M6 M8 M10 M12 M14 M16 M20

5.5 6.5 8.5 10.8 13.0 13.0 14.5 19.5

68.0 68.0 86.5 102.0 122.5 138.0 148.5 185.0

M5 M6 M8 M10 M12 M14 M16 M20

Plastic Back Card.

F

Upset Forging

B.L. (kgs)

2 2 2 2 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

850 850 1,000 1,350 2,500 4,500 6,700 7,800 9,000 850 1,000 1,350 2,500 4,500 6,700 7,800 9,000

1 2 3 3 n/a n/a n/a n/a P B C

1,200 1,500 500 400 250 200 150 70

(1)

P B C

P B C

SS316

SF78021N/R

Material

2,500 2,500 2,000 1,200 500 300 125 100 70 2,500 2,000 800 500 300 125 100 70

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

ØC (mm)

SF78021N/L

Material

L

SIZE (mm)

SF78021/R

Material

SF78021N/L Left threaded eye and nut SF78021N/R Right threaded eye and nut

SF7802 Eye terminal

1 2 3 3 n/a n/a n/a n/a

(1)

B.L. (kgs)

750 1,000 2,200 3,000 5,000 6,100 8,000 11,000 (2)

B.L. (kgs)

750 1,000 2,200 3,000 5,000 6,100 8,000 11,000 (2)

M

B.L. (kgs)

n/a 1,500 900 500 n/a n/a n/a n/a

750 1,000 2,200 3,000 5,000 6,100 8,000 11,000 (2)

M

B.L. (kgs)

2,500 1,500 900 450 300 n/a n/a n/a

750 1,000 2,200 3,000 5,000 6,100 8,000 11,000

* For more information on symbols, refer to page XVI.


Terminals & Turnbuckles M

C

L

L1

BF311EL (Left threaded eye ) BF311ER (Right threaded eye )

Forging material

: AISI304 - DIN 1.4301 AISI316 - DIN 1.4301 Surface treatment : "E.P." (Electro polished)

Field of application Left threaded eyes and right threaded eyes are designed to be used primarily with turnbuckles.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

L

L1

(1)

B.L. (kgs)

SS304

SS316

(mm)

(mm)

M (thread)

1931-1041 1931-1451 1311-5504 1311-5506 1931-1181 1311-5509 1311-5512 1311-5516 1311-2001 1311-3161 1311-4102 1311-5122 1311-5538 1311-2213 1311-5758 1311-5534 1311-2113

2931-1041 2931-1451 2311-5503 2311-5502 2931-1182 2311-5509 2311-5512 2311-5516 2311-2001 2311-3161 2311-4102 2311-5122 2311-5538 2311-2213 2311-5759 2311-5533 2311-2113

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

8.5 8.5 10.0 12.0 14.0 17.0 20.0 22.0 28.0 10.0 12.0 14.0 17.0 20.0 22.0 28.0 20.0

52.0 48.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 160.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

475 680 680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500 4,500

item no. Material

C (mm)

BF311ER

(1)

C (mm)

L1

SS316

SIZE (mm/inch)

L

SS304

(mm)

(mm)

M (thread)

B.L. (kgs)

1931-1040 1931-1450 1931-1205 1311-5606 1931-1208 1311-5609 1311-5612 1311-5616 1311-2011 1311-3162 1311-4112 1311-5112 1311-5638 1311-2214 1311-5658 1311-5634 1311-2114

2931-1040 2931-1450 2931-1206 2311-5608 2931-1209 2311-5601 2311-5611 2311-5615 2311-2011 2311-3162 2311-4113 2311-5113 2311-5638 2311-2214 2311-5659 2311-5633 2311-2114

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

8.5 8.5 10.0 12.0 14.0 17.0 20.0 22.0 28.0 10.0 12.0 14.0 17.0 20.0 22.0 28.0 20.0

52.0 48.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 160.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

475 680 680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500 4,500

Š Copyright 2010 by Strudyna Thailand

Technical Data

BF311EL

SIZE (mm/inch)

Material

* For more information on symbols, refer to page 17.

67

SERIES

item no.

BASIC

BF311EL, BF311ER


Terminals & Turnbuckles M

C

L

L1

BF311NEL (Left threaded eye and nut) BF311NER (Right threaded eye and nut)

BF311NEL, BF311NER

item no.

Technical Data

Material

Forging material

: AISI304 - DIN 1.4308 AISI316 - DIN 1.4401 Surface treatment : "E.P." (Electro polished)

Field of application Left threaded eyes and nuts and right threaded eyes and nuts are designed to be assembled with turnbuckles.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

Š Copyright 2010 by Strudyna Thailand

SERIES

BASIC 68

C (mm)

L

L1

(1)

B.L. (kgs)

SS304

SS316

SIZE (mm/inch)

(mm)

(mm)

M (thread)

1311-5543 1311-5445 1311-5557 1311-5556 1311-5558 1311-5410 1311-5412 1311-5416 1311-5420 1311-5436 1311-5414 1311-5456 1311-5438 1311-5411 1311-5458 1311-5434 1311-5413

2311-5543 2311-5445 2311-5555 2311-5559 2311-5554 2311-5410 2311-5412 2311-5416 2311-5420 2311-5436 2311-5414 2311-5456 2311-5438 2311-5411 2311-5458 2311-5434 2311-5413

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

8.5 8.5 10.0 12.0 14.0 17.0 20.0 22.0 28.0 10.0 12.0 14.0 17.0 20.0 22.0 28.0 20.0

52.0 48.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 160.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

475 680 680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500 4,500

C (mm)

L

L1

(mm)

(mm)

M (thread)

B.L. (kgs)

8.5 8.5 10.0 12.0 14.0 17.0 20.0 22.0 28.0 10.0 12.0 14.0 17.0 20.0 22.0 28.0 20.0

52.0 48.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 62.0 77.0 105.0 128.5 160.0 202.5 232.0 160.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8 5/8" 3/4" 1/2"UNC

475 680 680 1,500 2,300 3,100 4,400 8,100 11,000 650 1,300 2,100 2,500 4,500 6,700 10,500 4,500

item no. Material

BF311NEL

BF311NER SS304

SS316

SIZE (mm/inch)

1931-1240 1311-5545 1311-5505 1311-5507 1311-5508 1311-5511 1311-5514 1311-5518 1311-5521 1311-5336 1311-5314 1311-5356 1311-5338 1311-5311 1311 5358 1311-5358 1311-5334 1311-5313

2931-1203 2311-5545 2931-1202 2311-5501 2311-5908 2311-5513 2311-5514 2311-5518 2311-5521 2311-5336 2311-5314 2311-5356 2311-5338 2311-5311 2311 5358 2311-5358 2311-5334 2311-5313

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8 5/8" 3/4" 1/2"UNC

(1)

* For more information on symbols, refer to page 17.


O

Terminals & Turnbuckles M

L

L1

BF311HL (Left threaded hook) BF311HR (Right threaded hook)

Material

: AISI304 - DIN 1.4301 AISI316 - DIN 1.4301 Surface treatment : "E.P." (Electro polished)

Field of application Left threaded hooks and Right threaded hooks are designed to be used primarily with turnbuckles.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV class 8 load characteristics

(1)

O (mm)

B.L. (kgs)

SS304

SS316

(mm)

M (thread)

1931-1044 1931-1454 1931-1215 1931-1216 1311-5708 1311-5709 1311-5712 1311-5716 1311-2012 1311-3163 1931-1104 1931-1527 1311-5738 1311-2215 1311-5801 1311-3401 1311-2115

2931-1044 2931-1454 2931-1215 2931-1216 2311-5708 2311-5709 2311-5712 2311-5716 2311-2012 2311-3163 2931-1103 2931-1526 2311-5738 2311-2215 2311-5801 2311-3401 2311-2117

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

50.5 48.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 165.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

5.5 6.3 5.5 6.5 8.0 11.2 14.0 17.0 22.0 5.5 6.5 8.0 11.2 14.0 17.0 22.0 14.0

100 130 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500 1,400

L1

item no. Material

L1

SIZE (mm/inch)

BF311HR

L (mm)

(1)

SS304

SS316

SIZE (mm/inch)

L (mm)

(mm)

M (thread)

O (mm)

B.L. (kgs)

1931-1043 1931-1453 1931-1225 1931-1226 1311-5808 1311-5809 1311-5812 1311-5816 1311-2013 1311-3164 1931-1201 1931-1507 1311-5838 1311-2216 1311-5802 1311-3402 1311-2116

2931-1043 2931-1453 2931-1224 2931-1227 2311-5805 2311-5809 2311-5812 2311-5816 2311-2013 2311-3164 2931-1201 2931-1506 2311-5838 2311-2216 2311-5802 2311-3402 2311-2116

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

50.5 48.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 165.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

5.5 6.3 5.5 6.5 8.0 11.2 14.0 17.0 22.0 5.5 6.5 8.0 11.2 14.0 17.0 22.0 14.0

100 130 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500 1,400

BASIC

Forging material

BF311HL

Š Copyright 2010 by Strudyna Thailand

item no.

Technical Data

* For more information on symbols, refer to page 17.

69

SERIES

BF311HL, BF311HR


M

O

Terminals & Turnbuckles

L

L1

BF311N/HL (Left threaded hook and nut) BF311N/HR (Right threaded hook and nut) item no.

BF311N/HL, BF311N/HR Technical Data Forging material

: AISI304 - DIN 1.4301 AISI316 - DIN 1.4401 Surface treatment : "E.P." (Electro polished)

Field of application Left threaded hooks and nuts and right threaded hooks and nuts are designed to be assembled with turnbuckles.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV class 8 load characteristics

Š Copyright 2010 by Strudyna Thailand

SERIES

BASIC 70

L1

(1)

O (mm)

B.L. (kgs)

SS304

SS316

(mm)

M (thread)

1311-5641 1311-5646 1311-5655 1311-5665 1311-5604 1311-5610 1311-5613 1311-5617 1311-5620 1311-1317 1311-1513 1311-1515 1311-5537 1311-1211 1311-5657 1311-5535 1311-5103

2311-5641 2311-5646 2311-5656 2311-5665 2311-5704 2311-5610 2311-5613 2311-5617 2311-5620 2311-1317 2311-1513 2311-1515 2311-5537 2311-1211 2311-5657 2311-5535 2311-5103

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

50.5 48.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 165.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

5.5 6.3 5.5 6.5 8.0 11.2 14.0 17.0 22.0 5.5 6.5 8.0 11.2 14.0 17.0 22.0 14.0

100 130 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500 1,400

L1

item no. Material

BF311N/HL

SIZE (mm/inch)

Material

BF311N/HR

L (mm)

(1)

SS304

SS316

SIZE (mm/inch)

L (mm)

(mm)

M (thread)

O (mm)

B.L. (kgs)

1311-5640 1311-5645 1311-5605 1311-5607 1311-1503 1311-1510 1311-1512 1311-1517 1311-1520 1311-1316 1311-1514 1311-1516 1311-1538 1311-1212 1311-1558 1311-1534 1311-5102

2311-5640 2311-5645 2311-5603 2311-5602 2311-1504 2311-1510 2311-1512 2311-1517 2311-1520 2311-1316 2311-1514 2311-1516 2311-1538 2311-1212 2311-1558 2311-1534 2311-5102

M4.0 M4.5 M5.0 M6.0 M8.0 M10.0 M12.0 M16.0 M20.0 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

50.5 48.0 62.0 83.0 104.5 131.5 165.0 202.5 222.0 83.0 83.0 104.5 131.5 165.0 202.5 222.0 165.0

33.5 27.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 39.0 50.0 66.5 83.5 110.0 137.5 147.0 110.0

M4 M5 M5 M6 M8 M10 M12 M16 M20 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1/2"UNC

5.5 6.3 5.5 6.5 8.0 11.2 14.0 17.0 22.0 5.5 6.5 8.0 11.2 14.0 17.0 22.0 14.0

100 130 130 350 650 800 1,400 2,400 3,500 130 350 650 800 1,400 2,400 3,500 1,400

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles A

B L

L

L1

L1 F

Material

Technical Data

SF7803 SS316

SIZE L1 ØA B Ø D DiaØCable Ø F L (mm/inch) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Accessory

6780-3002 6780-3025 6780-3003 6780-3004 6780-3005 6780-3006 6780-3007 67 6780-3008 67 6780-3010 67 6780-3012 67 6780-3114 67 6780-3116 67 6780-3332 67 6780-3718 67 6780-3532 67 6780-3316 67 6780-3732 67 6780-3714 67 6780-3615 67 6780-3318 67

Forging material : AISI316 - DIN 1.4401 Production : SF7803 - Jaw - Cast Pin - Forged Accessory - See chart Surface treatment : "E.P." (Electro polished)

Field of application Swage forks are designed for swaging of a loose end wire rope. Wire must be properly swaged by using a swaging machine.

Swage fork

2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 14.0 16.0 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8"

5.00 5.00 6.00 8.00 9.00 12.00 12.00 14.28 16.00 19.00 25.00 25.00 5.00 6.00 8.00 9.00 9.00 12.00 14.28 16.00

7.0 7.0 8.0 11.0 12.0 14.5 14.5 15.0 17.0 20.0 30.0 30.0 7.0 8.0 11.0 12.0 12.0 14.5 15.0 17.0

5.53 5.53 6.35 7.54 9.12 12.54 14.30 16.13 17.85 21.44 25.00 28.17 5.53 6.35 7.54 9.12 10.84 12.54 16.13 17.85

2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10.0 12.0 14.0 16.0 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8"

2.20 2.70 3.30 4.30 5.30 6.35 7.30 8.40 10.50 12.50 14.90 17.10 2.70 3.50 4.30 5.10 5.90 6.70 8.40 9.90

53.5 62.0 68.0 77.0 87.0 109.0 116.0 148.0 164.0 215.0 285.0 313.0 62.0 68.0 77.0 87.0 93.0 109.0 148.0 154.0

32 35 38 45 51 64 70 80 100 144 168 192 35 38 45 51 57 64 80 90

Ring Ring Ring Ring Ring Ring Ring Cotter pin Cotter pin Cotter pin Cotter pin Cotter pin Ring Ring Ring Ring Ring Ring Cotter pin Cotter pin

A

BF312P/JL, BF312P/JR Forging material : AISI316 - DIN 1.4401 Production : BF312P/JL - Jaw - Cast Pin - Forged Accessory - See chart BF312P/JR - Shackle - Cast Pin - Forged Accessory - See chart Surface treatment : "E.P." (Electro polished)

Field of application Left threaded fork and Right threaded forks are designed for assembly with the turnbuckles or the other fittings together. Selection of left hand or right hand thread must be carefully checked.

item no. Material

is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

Note:

Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 9 load characteristics

Piece per carton.

P B C

M5 M6 M8 M10 M12 M14 M16 M20 M22 M24

Plastic Back Card.

5 6 8 9 12 14 16 19 25 25

7.0 8.0 11.0 12.0 14.5 15.0 17.0 20.0 30.0 30.0

BF312P/JR SS316

6931-2336 6931-2306 6931-2208 6931-2210 6312-6012 6931-2214 6312-0619 6312-0620 6312-0629

Note:(1) Standard safety factor for working load

(2)

SIZE ØA B L (mm/inch) (mm) (mm) (mm)

6312-3318 6931-2206 6931-2256 6312-3319 6312-0612 6931-2614 6312-0617 6312-0618 6312-0623 6312-0625

Technical Data

L

BF312P/JR Right threaded fork

BF312P/JL SS316

700 700 1,250 1,800 2,650 4,000 5,800 6500 9000 11,000 13,000 18,000 700 1,250 1,800 2,650 3,000 4,000 7,250 8,400

L1

BF312P/JL Left threaded fork Material

1 2 3 3 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

B

M

L L1

item no.

1,500 1,500 1,000 500 250 150 150 70 50 40 10 10 1,500 1,000 500 250 150 150 70 50

(1)

B.L. (kgs)

A

B

M

P B C

56.50 68.50 80.00 98.50 121.25 136.00 143.00 160.00 217.50 215.50

SIZE ØA B L (mm/inch) (mm) (mm) (mm)

M5 M6 M8 M10 M12 M14 M16 M20 M24

© Copyright 2010 by Strudyna Thailand

SF7803

F

5 6 8 9 12 14 16 19 25

7.0 8.0 11.0 12.0 14.5 15.0 17.0 20.0 30.0

L1 M (mm) (thread) Accessory

39 50 57 68 82 95 102 113 146 144

M5 M6 M8 M10 M12 M14 M16 M20 M22 M24

Ring 1,000 Ring 500 Ring 400 Ring 300 Ring 180 Cotter pin 100 Cotter pin 50 Cotter pin 40 Cotter pin n/a Cotter pin 25

L1 M (mm) (thread) Accessory

56.50 39 68.50 50 80.00 57 98.50 68 121.25 82 136.00 95 143.00 102 160.00 113 215.50 144

M5 M6 M8 M10 M12 M14 M16 M20 M24

Ring 1,000 Ring 500 Ring 400 Ring 300 Ring 180 Cotter pin 100 Cotter pin 50 Cotter pin 30 Cotter pin 25

P B C

(2)

B.L. (kgs)

1 250 2 1,400 3 2,200 3 3,450 n/a 5,000 n/a 6,400 n/a 8,000 n/a 10,500 n/a 15,000 n/a 18,000 P B C

(2)

B.L. (kgs)

1 250 2 1,400 3 2,200 3 3,450 n/a 5,000 n/a 6,400 n/a 8,000 n/a 10,500 n/a 18,000

* For more information on symbols, refer to page 17.

71

SERIES

item no.

SF7803 Swage fork

BASIC

D

A

B


Terminals & Turnbuckles A

D

A

B D

L

F

A

D

L

F

Material

S7805, SF7805

S7805

SF7805 Swage toggle

SS316

SIZE L ØA B Ø D Dia Ø Cable Ø F (mm/inch) (mm) (mm) (mm) (mm) (mm) (mm)

5 5 6 8 9 12 16 19 5 6 8 9 12 16 19

Technical Data Forging material : AISI316 - DIN 1.4401 Production : S7805 - Terminal - Cast Toggle - Forged Accessory - See chart SF7805 - Terminal/Toggle - Forged Accessory - E-Ring Surface treatment : "E.P." (Electro polished)

Field of application Swage toggles are designed for swaging of a loose end wire rope. Wire must be properly swaged by using a swaging machine.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

SS316

SIZE (mm)

ØA (mm)

B (mm)

Ø D Dia Ø Cable Ø F (mm) (mm) (mm)

L (mm)

2780-5003 2780-5004 2780-5005 2780-5006 2780-5007 2780-5008 2780-5010 2780-5012 2780-5014 2780-5016

3 4 5 6 7 8 10 12 14 16

6 8 10 12 12 14 16 19 22 25

6.4 9.0 11.0 13.0 13.0 13.0 18.0 22.0 24.0 28.0

6.30 7.50 9.08 12.50 14.25 16.08 17.80 21.40 24.95 28.10

3.30 4.30 5.30 6.30 7.40 8.40 10.50 12.50 14.90 17.10

item no.

SF7805

Material

F F F F F F F F F F

Swage Toggle

6 6 7 10 12 13 17 20 6 7 10 12 13 17 20

5.53 5.53 6.35 7.54 9.12 12.54 16.13 17.85 5.53 6.35 7.54 9.12 12.54 16.13 17.85

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8"

3 4 5 6 7 8 10 12 14 16

3.3 4.3 5.3 6.3 7.4 8.4 10.5 12.5 14.9 17.1

© Copyright 2010 by Strudyna Thailand

SERIES

BASIC

(1)

B.L. (kgs)

P B C

600 300 200 60 50 50 40 25 15 10

B

1 2 2 3 3 n/a n/a n/a n/a n/a

1,200 2,000 3,000 4,500 6,000 7,500 8,500 11,500 18,000 20,000

M

L1

72

(1)

B.L. (kgs)

2.20 2.20 Ring 400 1,200 1 2.70 2.70 Ring 400 1,200 2 3.30 3.30 Ring 670 700 2 4.30 4.30 Ring 400 3 1,400 5.30 5.30 Ring 200 3 1,700 6.35 6.35 Ring 150 n/a 4,000 8.40 8.40 Cotter pin 50 n/a 7,000 10.50 10.50 Cotter pin 40 n/a 7,500 2.70 2.70 Ring 1,200 n/a 400 3.50 3.50 Ring 700 n/a 670 4.30 4.30 Ring 400 n/a 1,400 5.10 5.10 Ring 200 n/a 1,700 6.70 6.70 Cotter pin 150 n/a 4,000 8.40 8.40 Cotter pin 50 n/a 7,000 9.90 9.90 Cotter pin 25 n/a 7,500

A

M

P B C

Accessory

2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8"

6780-5002 6780-5025 6780-5003 6780-5004 6780-5005 6780-5006 6780-5008 6780-5010 6780-5332 6780-5108 6780-5532 6780-5316 6780-5104 6780-5516 6780-5308

L

F

S7805 Swage toggle item no.

B

B

L1 L

B3125/L Left threaded toggle item no. Material

B3125/L, B3125/R Technical Data Forging material : AISI316 - DIN 1.4401 Production : B3125/L - Toggle - Forged Accessory - See chart B3125/R - Toggle - Forged Accessory - See chart Surface treatment : "E.P." (Electro polished)

Field of application Threaded toggles are designed for assembly with the turnbuckles or other fittings together. Selection of left hand or right hand thread must be carefully checked.

Note:

(2)

Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 9 load characteristics

Piece per carton.

P B C

B3125/L SS316

6312-5055 6312-5066 6931-2580 6931-2501 6931-2521 6931-2541 6931-2561 6931-2502 item no. Material

B3125/R SS316

6312-5055 6312-5066 6931-2580 6931-2501 6931-2521 6931-2541 6931-2561 6931-2502

Plastic Back Card.

SIZE ØA (mm) (mm)

M5 M6 M8 M10 M12 M14 M16 M20

5.00 6.00 8.00 9.00 12.00 14.28 16.00 19.00

SIZE ØA (mm) (mm)

M5 M6 M8 M10 M12 M14 M16 M20

5.00 6.00 8.00 9.00 12.00 14.28 16.00 19.00

F

B3125/R Right threaded toggle

B (mm)

L (mm)

L1 (mm)

M (mm)

Accessory

6 7 10 12 13 15 17 20

63 72 88 106 125 142 162 186

42 48 56 67 81 89 103 115

M5 M6 M8 M10 M12 M14 M16 M20

Ring 1,000 Ring 350 Ring 350 180 Ring 60 Ring 50 Cotter pin 45 Cotter pin 30 Cotter pin

B (mm)

L (mm)

L1 (mm)

M (mm)

Accessory

6 7 10 12 13 15 17 20

63 72 88 106 125 142 162 186

42 48 56 67 81 89 103 115

M5 M6 M8 M10 M12 M14 M16 M20

Ring 1,000 Ring 350 Ring 350 Ring 180 Ring 60 Cotter pin 50 Cotter pin 45 Cotter pin 30

Upset Forging

P B C

(2)

B.L. (kgs)

1 500 2 900 3 1,650 3 2,500 n/a 3,700 n/a 5,000 n/a 6,950 n/a 10,000 P B C

(2)

B.L. (kgs)

1 500 2 900 1,650 3 2,500 3 n/a 3,700 n/a 5,000 n/a 6,950 n/a 10,000

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles A

C

B L

F

Casting material Production

: AISI316 - DIN 1.4408 : S811 - Terminal - Cast S812 - Terminal - Cast Cable construction : 1x19 Surface treatment : "M.F. " (Matte finished)

Field of application Swageless eye terminals are designed for easy assembly of loose wire rope. No Swaging machine is needed during assembly process. Once assembled it is not expected to sustain high loads.

1

2

3

4

5

item no. Material

SS316

SIZE (mm)

ØC (mm)

ØF (mm)

6811-0003 6811-0004 6811-0005 6811-0006 6811-0008 6811-0010

3 4 5 6 8 10

6.00 8.00 10.00 12.75 16.00 16.00

3.5 4.5 6.0 7.0 9.0 11.0

S812

SIZE (mm)

ØA (mm)

B (mm)

(mm)

6812-0003 6812-0004 6812-0005 6812-0006 6812-0008 6812-0010

3 4 5 6 8 10

5 6 8 10 11 13

6 8 10 11 14 14

3.5 4.5 6.0 7.0 9.0 11.0

Lock nut

Cap

Cone

End nut

2

3

4

5

F

69 76 98 106 134 166

F

item no. Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S811M - Terminal - Cast S812M - Terminal - Cast Cable construction : See chart Surface treatment : "M.F. " (Matte finished)

Field of application

Micro eye swageless terminals are designed for a new smaller profile from our original swageless system. This is available for both 7x7 configuration cable and 1x19 configuration cable.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

item no.

Refer to page IV - class 4 load characteristics

Material

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 5 load characteristics

P B C

Plastic Back Card.

B.L. (kgs)

2 2 3 n/a n/a n/a

300 500 900 1,900 2,250 3,300

P B C

B.L. (kgs)

3 4 5 6 8 10

400 250 200 100 60 30

2 2 3 n/a n/a n/a

300 500 900 1,200 2,250 3,300

(2)

B

L

F S811M Eye swageless terminal (Micro)

S811M, S812M

600 250 200 135 75 40

(1)

P B C

Dia Ø Cable L (mm) (mm)

L

Instructions for assembly of S812

Piece per carton.

3 4 5 6 8 10

C

Instructions for assembly of S811

1

64 71 91 98 121 152

SS316

6

Fork

Dia Ø Cable L (mm) (mm)

S811M

S812M Fork swageless terminal (Micro)

SS316

SIZE (mm)

ØC (mm)

ØF (mm)

Dia Ø Cable Cable L (mm) construction (mm)

6811-0319 6811-0377 6811-0419 6811-0477 6811-0519 6811-0577 6811-0619 6811-0677 6811-0819 6811-0877 6811-1019 6811-1077

3 3 4 4 5 5 6 6 8 8 10 10

5.5 5.5 6.5 6.5 8.5 8.5 10.5 10.5 12.5 12.5 14.5 14.5

3.4 3.4 4.4 4.4 5.4 5.4 6.4 6.4 8.5 8.5 10.5 10.5

47.7 47.7 55.1 55.1 64.6 64.6 82.7 82.7 100.7 100.7 117.8 117.8

S812M SS316

6812-1003 6812-7003 6812-1004 6812-7004 6812-1005 6812-7005 6812-1006 6812-7006 6812-1008 6812-7008 6812-1010 6812-7010

3 3 4 4 5 5 6 6 8 8 10 10

1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7

SIZE Dia Ø Cable Cable ØA B F L (mm) (mm) (mm) (mm) (mm) (mm) construction

3 3 4 4 5 5 6 6 8 8 10 10

4 4 5 5 6 6 7 7 8 8 10 10

5 5 6 6 6 6 7 7 8 8 10 10

3.4 3.4 4.4 4.4 5.4 5.4 6.4 6.4 8.5 8.5 10.5 10.5

47.3 47.3 54.7 54.7 64.3 64.3 82.3 82.3 100.4 100.4 117.2 117.2

3 3 4 4 5 5 6 6 8 8 10 10

1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7 1x19 7x7

(1)

P B C

B.L. (kgs)

2 2 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a

300 300 500 500 900 900 1,900 1,900 2,250 2,250 3,300 3,300

P B C

B.L. (kgs)

2 2 3 n/a n/a n/a n/a n/a n/a n/a n/a n/a

225 225 375 375 675 675 900 900 1,690 1,690 2,475 2,475

© Copyright 2010 by Strudyna Thailand

Technical Data

S811

(2)

* For more information on symbols, refer to page 17.

73

SERIES

Material

S812 Fork swageless terminal

BASIC

S811, S812

F

S811 Eye swageless terminal

A

item no.

L


Terminals & Turnbuckles

F

F

M

M

L L1

L1

L

F S814 Right threaded swageless stud

S813 Swageless joiner item no.

S813, S814, S814L

Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S813 - Terminal - Cast S814 - Terminal - Cast S814L - Terminal - Cast Cable construction : 1x19 Surface treatment : "M.F. " (Matte finished)

Field of application

item no.

Swageless joiners and swageless studs are designed for easy assembly of loose wire rope. No Swaging machine is needed during assembly process. Once assembled it is not expected to sustain high loads.

Material

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 6 load characteristics

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

item no.

Refer to page IV - class 10 load characteristics

Material

Instructions for assembly of S813 1 2 3 4

1 Wire rope

5

2 End nut

S813

S814L Left threaded swageless stud

SS316

SIZE (mm)

ØF (mm)

L (mm)

Dia Ø Cable (mm)

6813-0003 6813-0004 6813-0005 6813-0006 6813-0008 6813-0010

3 4 5 6 8 10

3.5 4.5 6.0 7.0 9.0 11.0

86 93 128 132 165 212

3 4 5 6 8 10

S814 SS316

SIZE (mm)

ØF (mm)

L (mm)

L1 (mm)

6814-0003 6814-0004 6814-0005 6814-0006 6814-0008 6814-0010

3 4 5 6 8 10

3.5 4.5 6.0 7.0 9.0 11.0

120 129 172 200 242 267

60 63 85 107 126 126

SS316

SIZE (mm)

ØF (mm)

L (mm)

L1 (mm)

6814-1003 6814-1004 6814-1005 6814-1006 6814-1008 6814-1010

3 4 5 6 8 10

3.5 4.5 6.0 7.0 9.0 11.0

120 129 172 200 242 6 267

60 63 85 107 126 126

S814L

(1)

B.L. (kgs)

300 500 900 1,900 2,250 3,300

400 250 200 100 50 30

(2)

B.L. (kgs)

Dia Ø Cable M (mm) (mm)

M6 M8 M10 M12 M16 M16

3 4 5 6 8 10

350 200 200 100 50 30

(2)

B.L. (kgs)

Dia Ø Cable M (mm) (mm)

M6 M8 M10 M12 M16 M16

3 4 5 6 8 10

n/a 200 150 100 50 30

M

M

4 Pipe

300 500 900 1,900 2,250 3,300

F

F

3 Lock nut

300 500 900 1,900 2,250 3,300

74

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

5 Cone

L1

L1

L

L

1. Always wear safety goggles and gloves when working with wire rope. 2. Never stand on, drive over or put things on wire rope. S814N/L Left threaded swageless stud with nut

S814N Right threaded swageless stud with nut item no.

S814N, S814N/L

Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S814N - Terminal - Cast S814N/L - Terminal - Cast Cable construction : 1x19 Surface treatment : "M.F. " (Matte finished)

Field of application Swageless studs with nuts are used for wire rope where the use of a swaging machine is not necessary. They are assembled with a pair of spanners and can be taken off and reused.

Note:

(2)

Standard safety factor for working load is 1/4 of breaking load. Refer to page IV - class 10 load characteristics

Piece per carton.

item no. Material

S814N SS316

SIZE (mm)

ØF (mm)

L (mm)

L1 (mm)

6814-2003 6814-2004 6814-2005 6814-2006 6814-2008 6814-2010

3 4 5 6 8 10

3.5 4.5 6.0 7.0 9.0 11.0

120 129 172 200 242 267

60 63 85 107 126 126

SS316

SIZE (mm)

ØF (mm)

L (mm)

L1 (mm)

6814-3003 6814-3004 6814-3005 6814-3006 6814-3008 6814-3010

3 4 5 6 8 10

3 4 5 6 8 10

120 129 172 200 242 267

60 63 85 107 126 126

S814N/L

(2)

B.L. (kgs)

Dia Ø Cable M (mm) (mm)

M6 M8 M10 M12 M16 M16

3 4 5 6 8 10

400 250 200 100 50 30

(2)

B.L. (kgs)

Dia Ø Cable M (mm) (mm)

M6 M8 M10 M12 M16 M16

3 4 5 6 8 10

300 500 900 1,900 2,250 3,300

400 250 200 100 50 30

300 500 900 1,900 2,250 3,300

* For more information on symbols, refer to page 17.


Terminals & Turnbuckles

L

LTS, RTS

LTS Lef Left threaded stud RTS R Right threaded stud Material

Left threaded studs and right threaded studs are designed for assembly with mechanical threaded end fittings. Threaded stud length can be cut and adjusted accordingly.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

item no. Material

LTS

(1)

SS316

SIZE (mm/inch)

L (mm)

B.L. (kgs)

2610-1000 2810-1000 2101-1000 2122-1000 2162-1000 2202-1000 2242-1000 2104-1000 2506-1000 2318-1000 2124-1000 2102-1000 2102-2100

M6 M8 M10 M12 M16 M20 M24 1/4"-20UNC 5/16"-18UNC 3/8"-16 1/2"-12 1/2"-13UNC 1/2"-20UNF

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

1,200 2,200 3,200 5,000 8,000 12,000 19,000 1,200 2,200 3,000 5,200 5,200 5,200

SS316

SIZE (mm/inch)

L (mm)

B.L. (kgs)

2600-1000 2800-1000 2100-1000 2120-1000 2160-1000 2200-1000 2240-1000 2142-1000 2516-1000 2308-1000 2112-1000 00 2123-1000 00 2121-1000

M6 M8 M10 M12 M16 M20 M24 1/4"-20UNC 5/16"-18UNC 3/8"-16 1/2"-12 1/2 -13UNC 1/2"-13UNC 1/2"-20UNF

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

1,200 2,200 3,200 5,000 8,000 12,000 19,000 1,200 2,200 3,000 5,200 5,200 5,200

RTS

Threaded stud

(1)

bookstore

* For more information on symbols, refer to page 17.

Š Copyright 2010 by Strudyna Thailand

item no.

Field of application

75

SERIES

Forging material : AISI316 - DIN 1.4401 Surface treatment : "M.P." (Machine Polished)

BASIC

Technical Data


Rings & Eye plates L

D

SF317 Round ring item no.

SF317 Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF317 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Round rings are designed for assembly into many fittings. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 Refer to page IV - class 11 load characteristics

Note E1 : Breaking load is described as the

76

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

load point where welding fails. Deformation load is however lower and is dependent on the diameter of rod and circumference of ring. A general rule is to assume deformation load at around 1/5 of breaking load.

Piece per carton.

P B C

SF317 SS304

SS316

SIZE (mm)

4317-0310 4317-0315 4317-0320 4317-0325 4317-0330 4317-0335 4317-0340 4317-0420 4317-0425 4317-0430 4317-0435 4317-0440 4317-0520 4317-0525 4317-0530 4317-0535 4317-0540 4317-0545 4317-0550 4317-0560 4317-0565 4317-0625 4317-0630 4317-0635 4317-0640 4317-0645 4317-0650 4317-0655 4317-0660 4317-0680 4317-0690 4317-0740 4317-0745 4317-0750 4317-0755 4317-0760 4317-0765 4317-0830 4317-0835 4317-0840 4317-0845 4317-0850 4317-0855 4317-0860 4317-0865 4317-0870 4317-0875 4317-0880 4317-0890 4317-0810 4317-0930 4317-0950 4317-0960 4317-0965 4317-0970 4317-0980

6317-0310 6317-0315 6317-0320 6317-0325 6317-0330 6317-0335 6317-0340 6317-0420 6317-0425 6317-0430 6317-0435 6317-0440 6317-0520 6317-0525 6317-0530 6317-0535 6317-0540 6317-0545 6317-0550 6317-0560 6317-0565 6317-0625 6317-0630 6317-0635 6317-0640 6317-0645 6317-0650 6317-0655 6317-0660 6317-0680 6317-0690 6317-0740 6317-0745 6317-0750 6317-0755 6317-0760 6317-0765 6317-0830 6317-0835 6317-0840 6317-0845 6317-0850 6317-0855 6317-0860 6317-0865 6317-0870 6317-0875 6317-0880 6317-0890 6317-0810 6317-0930 6317-0950 6317-0960 6317-0965 6317-0970 6317-0980

3*10 3*15 3*20 3*25 3*30 3*35 3*40 4*20 4*25 4*30 4*35 4*40 5*20 5*25 5*30 5*35 5*40 5*45 5*50 5*60 5*65 6*25 6*30 6*35 6*40 6*45 6*50 6*55 6*60 6*80 6*90 7*40 7*45 7*50 7*55 7*60 7*65 8*30 8*35 8*40 8*45 8*50 8*55 8*60 8*65 8*70 8*75 8*80 8*90 8*100 9*30 9*50 9*60 9*65 9*70 9*80

Material

Plastic Back Card.

Ă˜D (mm)

L (mm)

3 3 3 3 3 3 3 4 4 4 4 4 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9

10 15 20 25 30 35 40 20 25 30 35 40 20 25 30 35 40 45 50 60 65 25 30 35 40 45 50 55 60 80 90 40 45 50 55 60 65 30 35 40 45 50 55 60 65 70 75 80 90 100 30 50 60 65 70 80

8,000 5,000 3,000 3,000 2,000 2,000 1,500 2,500 2,000 1,600 1,600 1,500 1,000 2,000 1,500 1,200 1,000 700 500 600 400 350 1,000 1,000 800 600 500 500 400 300 200 250 500 500 400 300 250 250 500 500 300 250 300 250 200 200 250 150 150 100 400 200 250 125 150 100

(1)

P B C

B.L. (kgs)

1 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3 5 5 5 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

650 650 650 650 650 650 650 1,000 1,000 1,000 1,000 1,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,700 2,700 2,700 2,700 2,700 2,700 2,700 2,700 2,700 2,700 3,200 3,200 3,200 3,200 3,200 3,200 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 6,200 6,200 6,200 6,200 6,200 6,200

* For more information on symbols, refer to page 17.


Rings & Eye plates item no.

SF317 Round ring (Continue from previous page)

Round ring

SF317 SS304 S

SS316

SIZE (mm)

Ă˜D (mm)

L (mm)

431 4317-0990 431 4317-1040 431 4317-1050 4317-1055 431 4317-1060 431 4317-1065 431 4317-1070 431 4317-1075 431 4317-1080 431 4317-1090 431 4317-1010 431 4317-1012 431 4317-1014 431 4317-1260 431 4317-1265 431 4317-1270 431 4317-1275 431 4317-1280 431 4317-1290 4317-1210 4317-1211 4317-1212 4317-1214 4317-1355 4317-1360 4317-1365 4317-1370 4317-1380 4317-1390 4317-1310 4317-1312 4317-1313 4317-1314 4317-1315 4317-1316

6317-0990 6317-1040 6317-1050 6317-1055 6317-1060 6317-1065 6317-1070 6317-1075 6317-1080 6317-1090 6317-1010 6317-1012 6317-1014 6317-1260 6317-1265 6317-1270 6317-1275 6317-1280 6317-1290 6317-1210 6317-1211 6317-1212 6317-1214 6317-1355 6317-1360 6317-1365 6317-1370 6317-1380 6317-1390 6317-1310 6317-1312 6317-1313 6317-1314 6317-1315 6317-1316

9*90 10*40 10*50 10*55 10*60 10*65 10*70 10*75 10*80 10*90 10*100 10*120 10*140 12*60 12*65 12*70 12*75 12*80 12*90 12*100 12*110 12*120 12*140 13*55 13*60 13*65 13*70 13*80 13*90 13*100 13 *120 13*130 13*140 13*150 13*160

9 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 13 13 13 13

90 40 50 55 60 65 70 75 80 90 100 120 140 60 65 70 75 80 90 100 110 120 140 55 60 65 70 80 90 100 120 130 140 150 160

Material

(1)

B.L. (kgs)

80 250 150 125 150 130 100 100 100 70 75 45 35 125 120 100 80 80 100 50 45 40 25 125 100 90 70 50 50 50 30 35 35 35 20

6,200 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 8,500 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 11,500 11,500 11,500 11,500 11,500 11,500 11,500 11,500 11,500 11,500 11,500 11,500

D

SF3171 Round ring (center cross bar)

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3171 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Round rings (center cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 on page E1 Refer to page IV - class 11 load characteristics

Piece per carton.

Material

SF3171 SS316

SIZE (mm)

D (mm)

L (mm)

6317-1630 6317-1640 6317-1840 6317-1850 6317-1960 6317-1150 6317-1106 6317-1107 6317-1108 6317-1125 6317-1126 6317-1128

6*30 6*40 8*40 8*50 9*60 10*50 10*60 10*70 10*80 12*50 12*65 12*80

6 6 8 8 9 10 10 10 10 12 12 12

30 40 40 50 60 50 60 70 80 50 65 80

(1)

B.L. (kgs)

800 600 250 250 150 130 125 100 100 n/a 110 60

2,700 2,700 5,000 5,000 6,200 8,500 8,500 8,500 8,500 10,000 10,000 10,000

* For more information on symbols, refer to page 17.

BASIC

item no.

SF3171

77

SERIES

Š Copyright 2010 by Strudyna Thailand

L


Rings & Eye plates B

L

D

SF3250 Dee ring item no.

SF3250 Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF3250 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Dee rings are designed for assembly into many fittings. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 on page E1

78

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Refer to page IV - class 1 load characteristics

Piece per carton.

SF3250 SS304

SS316

SIZE (mm)

B (mm)

Ă˜D (mm)

L (mm)

4325-0315 4325-0320 4325-0325 4325-0330 4325-0420 4325-0425 432 4325-0430 432 4325-0435 432 4325-0440 432 4325-0450 432 4325-0525 432 4325-0530 432 4325-0535 432 4325-0540 432 4325-0545 432 4325-0550 432 4325-0560 432 4325-0625 432 4325-0630 432 4325-0635 432 4325-0640 432 4325-0645 432 4325-0650 432 4325-0655 432 4325-0660 4325-0670 4325-0750 4325-0845 4325-0850 4325-0855 4325-0860 4325-0865 4325-0870 4325-0875 4325-0880 4325-0960 4325-0970 4325-0150 4325-0160 4325-0265 4325-0170 4321-0180 4325-0190 4325-0110

6325-0315 6325-0320 6325-0325 6325-0330 6325-0420 6325-0425 6325-0430 6325-0435 6325-0440 6325-0450 6325-0525 6325-0530 6325-0535 6325-0540 6325-0545 6325-0550 6325-0560 6325-0625 6325-0630 6325-0635 6325-0640 6325-0645 6325-0650 6325-0655 6325-0660 6325-0670 6325-0750 6325-0845 6325-0850 6325-0855 6325-0860 6325-0865 6325-0870 6325-0875 6325-0880 6325-0960 6325-0970 6325-0150 6325-0160 6325-0265 6325-0170 6321-0180 6325-0190 6325-0110

3*15 3*20 3*25 3*30 4*20 4*25 4*30 4*35 4*40 4*50 5*25 5*30 5*35 5*40 5*45 5*50 5*60 6*25 6*30 6*35 6*40 6*45 6*50 6*55 6*60 6*70 7*50 8*45 8*50 8*55 8*60 8*65 8*70 8*75 8*80 9*60 9*70 10*50 10*60 10*65 10*70 10*80 10*90 10*100

16 20 26 30 20 27 30 35 39 51 26 30 35 39 45 52 60 26 30 35 39 45 51 55 60 70 51 45 51 55 60 65 70 75 80 60 70 50 60 65 70 80 90 102

3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 7 8 8 8 8 8 8 8 8 9 9 10 10 10 10 10 10 10

14 17 22 25 17 22 25 30 34 43 22 25 30 34 38 43 51 22 25 30 34 38 43 47 51 60 43 38 43 47 51 55 60 64 68 52 60 43 51 55 60 68 77 87

Material

(1)

B.L. (kgs)

6,400 4,000 3,000 2,400 3,000 2,000 1,500 1,500 1,500 800 1,800 1,200 1,200 1,000 750 450 400 1,000 1,200 700 700 600 500 450 300 250 400 400 300 250 250 250 200 150 200 150 175 150 150 150 150 80 70 75

600 600 600 600 800 800 800 800 800 800 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 2,200 2,800 2,800 2,800 2,800 2,800 2,800 2,800 2,800 3,500 3,500 5,000 5,000 5,000 5,000 5,000 5,000 5,000

* For more information on symbols, refer to page 17.


Rings & Eye plates L

D

D

L B D1 B

SF4900 Square ring item no.

SF4900, SF32501

Material

Technical Data Forging material Production

: AISI304 - DIN 1.4301 : SF4900 - Ring - Welded SF32501 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Square rings and Dee rings (cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding. item no. Material

SF4900

SF32501 Dee ring (cross bar)

SS304

SIZE (mm)

B (mm)

ØD (mm)

L (mm)

4490-0520 4490-0525 4490-0530 4940-0540 4490-0650 4490-0747 4490-0865

5*20 5*25 5*30 5*40 6*50 7*47 8*65

20 26 32 39 52 47 65

5 5 5 5 6 7 8

12.0 15.0 18.0 21.0 25.4 30.0 38.0

SF32501

(1)

B.L. (kgs)

1,500 1,500 1,200 1,000 600 500 200

SS304

SIZE (mm)

B (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

4325-0154 4325-0155 4325-0164 4325-0165 4325-0184 4325-0185

5*45 5*50 6*45 6*50 8*45 8*50

45 52 48 50 45 50

5 5 6 6 8 8

4 4 5 5 6 6

39 43 45 43 36 43

D

L

1,000 1,000 1,000 1,000 1,500 1,800 3,300 (1)

B.L. (kgs)

500 500 450 450 250 250

L

1,000 1,000 1,800 1,800 2,800 2,800

D

C D1

B

Technical Data

item no.

Forging material

: AISI304 - DIN 1. 4301/ AISI316 - DIN 1.4401 : SF3252 - Ring - Welded SF3251 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Production

Field of application Triangle rings and Triangle rings (cross bar) are designed for assembly into many fittings. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 on page E1 Refer to page IV - class 12 load characteristics

SS316

SIZE (mm)

B (mm)

ØD (mm)

L (mm)

4325-2335 4325-2420 4325-2530 4325-2540 4325-2545 4325-2640 4325-2645 432 4325-2650 432 4325-2770 432 4325-2845 432 4325-2850

6325-2335 6325-2420 6325-2530 6325-2540 6325-2545 6325-2640 6325-2645 6325-2650 6325-2770 6325-2845 6325-2850

3*35 4*20 5*30 5*40 5*45 6*40 6*45 6*50 7*70 8*45 8*50

35 20 30 40 45 40 45 51 70 45 50

3 4 5 5 5 6 6 6 7 8 8

35 18 30 36 39 36 40 45 70 41 45

item no. Material

Triangle ring

Piece per carton.

SF3252 SS304

Material

SF3251 S SS304

SS316

SIZE (mm)

432 4325-1545 432 4325-1550 432 4325-1643 432 4325-1645 432 4325-1650 432 4325-1845 432 4325-1850 432 4325-1860

6325-1545 6325-1550 6325-1643 6325-1645 6325-1650 6325-1845 6325-1850 6325-1860

5*45 5*50 6*43 6*45 6*50 8*45 8*50 8*60

(1)

B.L. (kgs)

3,200 3,000 1,200 1,200 1,000 700 700 600 300 450 400

B (mm)

C (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

46 52 46 46 52 46 52 61

5 5 4 4 5 5 5 5

5 5 6 6 6 8 8 8

5 5 5 5 5 6 6 6

41 45 41 53 45 41 45 54

600 900 1,300 1,300 1,300 2,000 2,000 2,000 2,200 2,800 2,800 (1)

B.L. (kgs)

600 500 500 500 500 300 250 250

1,300 1,300 1,800 1,800 1,800 2,800 2,800 2,800

* For more information on symbols, refer to page 17.

BASIC

SF3252, SF3251

SF3251 Triangle ring (cross bar)

79

SERIES

SF3252 Triangle ring

© Copyright 2010 by Strudyna Thailand

B


Rings & Eye plates C

M

D1

D

L L

SF319 Ring bolt (with washer and nut) item no.

SF319

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF319 - Ring - Welded Bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application Ring bolts (with washer and nut) are designed for assembly into many applications. Rings are all made by TIG Argon welding.

item no. Pliers

S329 Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S329 - Ring - Welded Bolt - Cast Surface treatment : "E.P. " (Electro polished)

Field of application

80

Note:(1) See Note : E1 on page E1 Refer to page IV - class 13 load characteristics

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

M (thread)

4319-0003 4319-0005 4319-0006 4319-0660 4319-0007 4319-0008 4319-0880 4319-0009 4319-9120 4319-9140 4319-0110 4319-0012 4319-0121 4319-0122 4319-0123 4319-0124

3 5 6 6*60 7 8 8*80 9 9*120 9*140 10*100 12 12*120 12*150 12*180 12*200

20 30 35 35 40 45 45 50 50 50 50 60 60 60 60 60

3 5 6 6 7 8 8 9 9 9 10 12 12 12 12 12

60 60 75 75 75 75 80 110 120 140 100 110 120 150 180 200

M5 M5 M6 M6 M6 M8 M8 M10 M10 M10 M10 M12 M12 M12 M12 M12

SS316

SIZE (mm)

ØC (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

6329-0640 6329-0660 6329-0680 6329-0610 6329-0860 6329-0880 6329-0810 6329-0812 6329-0160 6329-0180 6329-0110 6329-0112 6329-0280 6329-0210 6329-0212 6329-0214 6329-0216

6*40 6*60 6*80 6*100 8*60 8*80 8*100 8*120 10*60 10*80 10*100 10*120 12*80 12*100 12*120 12*140 12*160

50 50 50 50 50 50 50 50 75 75 75 75 75 75 75 75 75

6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 12

6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 12

40 60 80 100 60 80 100 120 60 80 100 120 80 100 120 140 160

SF319

(1)

B.L. (kgs)

1,500 1,000 400 500 400 200 200 100 100 100 100 100 60 60 50 45

400 550 1,000 1,000 1,000 1,800 1,800 2,400 2,400 2,400 2,400 4,000 4,000 4,000 4,000 4,000 (1)

B.L. (kgs)

300 250 250 250 150 140 125 125 75 65 60 60 50 50 50 40 40

900 900 900 900 1,600 1,600 1,600 1,600 2,500 2,500 2,500 2,500 3,500 3,500 3,500 3,500 3,500

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Ring wooden screws are designed for assembly into wood panel for many applications. Rings are all made by TIG Argon welding.

Material

SF319

S329 Ring wooden screw

Piece per carton.

* For more information on symbols, refer to page 17.


Rings & Eye plates C D D1

L M

L

L

Material

Technical Data Forging material : AISI304 - DIN 1.4301 SF318 - Ring - Welded Nail - Forged SF126 - Ring - Welded Bolt - Forged Surface treatment : "E.P. " (Electro polished) item no.

Field of application Ring nails are designed for hammering into wood panel for many applications. Rings are all made by TIG Argon welding. Ring bolts (with two washers and nut) are designed for screw in to different panels for different applications. Rings are all made by TIG Argon welding.

Material

item no. Pliers

Material

S319LT, S3192, SF3192 Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S319LT - Ring - Welded Bolt - See chart S3192 - Ring - Welded Bolt - See chart SF3192 - Ring - Welded Bolt - Forged Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Lag ring bolts are designed for screw into wooden panels for different applications. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 on page E1

item no. Material

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

4318-0003 4318-0004 4318-0005 4318-0006 4318-0008

3 4 5 6 8

25 30 35 40 45

3 4 5 6 8

45 50 60 65 65

SF126

(1)

B.L. (kgs)

2,000 1,200 700 400 250

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

M (thread)

4126-1085 4126-1010

10*85 10*100

32 32

6 6

85 100

M10 M10

S319LT

SIZE (mm)

ØC (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

Bolt

6319-9003 6319-9005 6319-9007

3 5 7

25 30 50

3 5 7

4 6 8

45 50 60

Forged Cast Cast

SS316

SIZE (mm)

ØC (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

Bolt

6319-2655 6319-2661 6319-2860 6319-2880 6319-2108 6319-2110 6319-2121 6319-2122

6*55 6*60 8*60 8*80 10*80 10*100 12*100 12*120

30 30 50 50 60 60 75 75

6 6 8 8 10 10 12 12

6 6 8 8 10 10 12 12

55 60 60 80 80 100 100 120

Cast Forged Cast Cast Cast Cast Cast Cast

SF3192

(1)

B.L. (kgs)

300 250

2,500 2,500

(1)

SS316

S3192

400 700 1,150 1,950 2,700

B.L. (kgs)

1,400 700 250

550 900 1,500 (1)

SS316

SIZE (mm)

ØC (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

2319-2445 2319-2655 2319-2661 2319-2860 2319-2880 2319-2810 2319-2108 2319-2110

4*45 6*55 6*60 8*60 8*80 8*100 10*80 10*100

25 30 30 50 50 50 60 60

3 6 6 8 8 8 10 10

4 6 6 8 8 8 10 10

45 55 60 60 80 100 80 100

B.L. (kgs)

600 500 200 180 75 100 50 50

900 900 1,500 1,500 2,500 2,500 3,500 3,500 (1)

B.L. (kgs)

1,500 600 500 200 180 n/a 75 100

550 900 900 1,500 1,500 1,500 2,500 2,500

BASIC

Refer to page IV - class 13 load characteristics

SF318

S319LT/ S3192/SF3192 Lag ring bolt

© Copyright 2010 by Strudyna Thailand

item no.

Hammer

SF318, SF126

SF126 Ring bolt (with two washers and nut)

Piece per carton.

* For more information on symbols, refer to page 17.

81

SERIES

SF318 Ring nail


Rings & Eye plates C

E

M

L

T

SF308 Lag bolt (with wide washer and nut) item no.

SF308

Material

Technical Data

SF308

L

D

L D

SF3215 Round pad bolt

SF3205 Round pad bolt (with ring)

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

ØE (mm)

L (mm)

T (mm)

4308-0640

6*40

25

6

35

40

3

SS304

SIZE (mm)

ØD (mm)

ØE (mm)

L (mm)

M (thread)

4321-5005 4321-5006 4321-5008

5 6 8

5 6 8

33 40 50

20 23 25

M6 M8 M10

(1)

B.L. (kgs)

400

1,350

Forging material : AISI304 - DIN 1.4301 Production : SF308 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Lag bolts (with wide washer and nut) are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.

Note:(1) See Note : E1 on page E1 Refer to page IV - class 8 load characteristics

SF3215

item no. Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3215 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

SF3215

(2)

B.L. (kgs)

700 450 250

400 500 1,000

Round pad bolts are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

SF3205

82

Forging material : AISI304 - DIN 1.4301 Production : SF3205 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

Material

SF3205 SS304

SIZE (mm)

ØC (mm)

ØD (mm)

ØE (mm)

L (mm)

M (thread)

4320-5005 4320-5006 4320-5008

5 6 8

30 40 50

5 6 8

33 40 50

20 23 25

M6 M8 M10

(1)

B.L. (kgs)

500 300 125

400 500 1,000

Round pad bolts (with ring) are designed for screw into all types of panels for different applications. Rings are all made by TIG Argon welding.

Note:(1)) See Note : E1 on page E1 Refer to page IV - class 8 load characteristics

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Technical Data

item no.

Piece per carton.

* For more information on symbols, refer to page 17.


Rings & Eye plates C

S

S D

D

E B SF3214 Round pad item no.

SF3214

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3214 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

SF3214

SF3204 Round pad (with ring)

SF3214H Round pad - hook type

SS304

SIZE (mm)

ØD (mm)

ØE (mm)

ØS (mm)

M (thread)

4321-4005 4321-4006 4321-4008

5 6 8

5 6 8

33 40 50

4.5 4.5 5.5

M6 M8 M10

SS304

SIZE (mm)

B (mm)

ØD (mm)

ØE (mm)

ØS (mm)

4321-4005 4321-4006 4321-4008

5 6 8

8 12 14

5 6 8

33 40 50

4.5 4.5 5.5

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

ØE (mm)

ØS (mm)

4320-4005 4320-4006 4320-4008

5 6 8

30 40 50

5 6 8

33 40 50

4.5 4.5 5.5

(1)

B.L. (kgs)

1,200 600 300

700 1,000 1,600

Field of application Round pad bolts are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

SF3214H

item no.

Technical Data

Material

Forging material : AISI304 - DIN 1.4301 Production : SF3214H - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

SF3214H

(1)

B.L. (kgs)

1,200 700 300

200 220 250

Round pads - hook type are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Surface treatment : "E.P. " (Electro polished)

Field of application

SF3204

(2)

B.L. (kgs)

600 300 150

700 1,000 1,600

© Copyright 2010 by Strudyna Thailand

SF3204

Round pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(2) See Note : E1 on page E1

BASIC

Refer to page IV - class 14 load characteristics

Round pad bolt

Piece per carton.

* For more information on symbols, refer to page 17.

83

SERIES

item no.


Rings & Eye plates C

S

L

L1

D D

B E

item no.

SF3212

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3212 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

SF3212

SF3202 Oblong pad (with ring)

SF3212H Oblong pad - hook type

SF3212 Oblong pad

SS304

SIZE (mm)

E (mm)

L (mm)

L1 (mm)

ØS (mm)

4321-2005 4321-2006 4321-2008 4321-2009

5 6 8 10

16 19 25 32

54 65 81 100

38 46 56 73

5.0 5.6 6.5 6.5

(1)

B.L. (kgs)

1,200 500 200 200

700 1,000 1,600 1,700

Oblong pads are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

item no.

SF3212H

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3212H - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Oblong pads - hook type are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

SF3212H SS304

SIZE (mm)

B (mm)

D (mm)

L (mm)

L1 (mm)

ØS (mm)

4321-2105 4321-2106 4321-2108 4321-2109

5 6 8 10

8 12 14 16

5 6 8 9

54 65 81 100

38 46 56 73

5.0 5.6 6.5 6.5

ØC

ØD

SS304

SIZE (mm)

(mm)

(mm)

E (mm)

L (mm)

ØS (mm)

4320-2005 4320-2006 4320-2008 4320-2009

5 6 8 9

30 40 50 60

5 6 8 9

16 19 25 32

54 65 81 100

5.0 5.6 6.5 6.5

(1)

B.L. (kgs)

1,000 800 300 200

200 220 250 280

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

item no.

SF3202

Material

84

Forging material : AISI304 - DIN 1.4301 Production : SF3202 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Oblong pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

(2)

B.L. (kgs)

500 350 150 100

700 1,000 1,600 1,900

Note:(2) See Note : E1 on p page g E1 Refer to page IV - class 14 load characteristics

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Technical Data

SF3202

Oblong pad

Piece per carton.

Diamond Cast Pad

* For more information on symbols, refer to page 17.


Rings & Eye plates C

S

L2

L2

L

D

D H

S3213 Diamond cast pad

SF3211 Diamond pad item no.

SF3211

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3211 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

SF3211

SF3201 Diamond pad (with ring)

SS304

SIZE (mm)

ØD (mm)

L (mm)

L2 (mm)

ØS (mm)

4321-1005 4321-1006 4321-1008

5 6 8

5 6 8

59 64 80

15 19 23

4.1 4.1 5.1

SIZE (inch)

H (mm)

L (mm)

L2 (mm)

ØS (mm)

21.0 27.5 29.0 35.0

66 80 89 100

20 16 22 25

8.0 8.0 8.5 8.5

(1)

B.L. (kgs)

500 400 250

700 1,000 1,600

Field of application Diamond pads are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

S3213 Technical Data

item no. Material

Casting material : AISI304 - DIN 1.4308 Production : S3213 - Pad - Cast Surface treatment : "E.P. " (Electro polished)

S3213 SS304

4321-3112 1.1/2"*2.1/2" 4321-3231 2"*3.1/8" 4321-3214 2.1/4"*3.1/2" 4321-3238 2.3/8"*4"

Field of application Diamond cast pads are designed for screw into all types of panels for different applications. Casting pad are thicker and stronger than standard diamond pads.

(1)

B.L. (kgs)

500 180 125 125

2,200 3,500 4,000 6,000

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

Forging material : AISI304 - DIN 1.4301 Production : SF3201 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

SF3201 SS304

SIZE (inch)

ØC (mm)

ØD (mm)

L (mm)

L2 (mm)

ØS (mm)

4320-1005 4320-1006 4320-1008

5 6 8

30 35 45

5 6 8

59 64 80

15 19 23

4.1 4.1 5.1

(2)

B.L. (kgs)

500 300 150

700 1,000 1,600

© Copyright 2010 by Strudyna Thailand

Technical Data

Material

Field of application Diamond pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(2)) See Note : E1 on page E1

BASIC

Refer to page IV - class 14 load characteristics

Piece per carton.

* For more information on symbols, refer to page 17.

85

SERIES

item no.

SF3201


Rings & Eye plates C

D L

S L C

D

SF3216 Square pad (swivel eye) Swivel

Swivel

item no. Material

SF3216, SF3206 Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF3216 - Ring - Welded SF3206 - Ring - Welded Surface treatment : "E.P. " (Electro polished)

item no. Material

Field of application Square pads (swivel eye) and Square pads (swivel eye with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

SF3216

SF3206 Square pad (swivel eye with ring)

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

ØS (mm)

4321-6005 4321-6006 4321-6008

5 6 8

15 18 19

5 6 8

35 40 50

4.2 4.2 5.2

SS304

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

ØS (mm)

4320-6005 4320-6006 4320-6008

5 6 8

30 40 50

5 6 8

35 40 50

4.2 4.2 5.2

SF3206

(1)

B.L. (kgs)

500 350 300

450 700 850 (2)

B.L. (kgs)

350 250 130

450 700 850

Note:(2) See Note : E1 on page E1

D

C

D

L

S

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

B

86

SF320 Square pad (with ring)

SF321 Square pad item no.

SF321, SF320

Material

Technical Data Forging material : AISI304 - DIN 1.4301 Production : SF321 - Pad - Welded SF320 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

item no.

Square pads and Square pads (with ring) are designed for screw into all types of panels for different applications. Pads are all made by TIG Argon welding.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 14 load characteristics

Material

SF321 SS304

SIZE (mm)

B (mm)

ØD (mm)

L (mm)

ØS (mm)

4321-0005 4321-0006 4321-0008

5 6 8

30 34 39

5 6 8

34 40 50

4.1 4.1 5.3

SF320

(1)

B.L. (kgs)

850 500 250

SS304

SIZE (mm)

B (mm)

ØC (mm)

ØD (mm)

L (mm)

ØS (mm)

4320-0005 4320-0006 4320-0008

5 6 8

30 34 39

30 35 45

5 6 8

34 40 50

4.1 4.1 5.3

700 1,000 1,600 (2)

B.L. (kgs)

600 300 125

700 1,000 1,600

Note:(2) SSee Note : E1 on page E1

Square pad

Piece per carton.

* For more information on symbols, refer to page 17.


Rings & Eye plates SLIDE

L

T

L1

H

SF3221 Square pad (without screw hole) item no.

SF3221 Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3221 - Pad - Welded Surface treatment : "E.P. " (Electro polished)

Field of application

SF3221 SS316

SIZE (mm)

H (mm)

L (mm)

L1 (mm)

T (mm)

6322-1154 6322-1174 6322-1194 6322-1234 6322-1305

15*42 17*42 19*42 23*42 30*50

12 12 12 12 14

42 42 42 42 50

15 17 19 23 30

3 3 3 3 4

1,000 1,000 900 800 500

Piece per carton.

* For more information on symbols, refer to page 17.

87

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Square pads (without screw hole) are designed for slide into special panels or welding onto panels. Pads are all made by TIG Argon welding.

Material


U-bolts & Eye bolts C

D

L

M

S582 Eye nut

S582

item no.

S582

Material

Technical Data

SIZE (mm/inch)

SS316

Casting material : AISI316 - DIN 1.4408 Production : S582 - Nut - Cast Surface treatment : "E.P. " (Electro polished)

6582-0006 6 8 6582-0008 10 6582-0010 12 6582-0012 16 6582-0016 20 6582-0020 24 6582-0024 30 6582-0030 36 6582-0036 1/4" 6582-0104 5/16" 6582-0516 3/8" 6582-0308 6582-0102 1/2" UNC 5/8" 6582-0508 3/4" 6582-0304 1" 6582-0001

Field of application Eye nuts are designed for screw into all types of threaded studs for different applications.

Eye nut

ØC (mm)

ØD (mm)

L (mm)

M (thread)

15 20 25 30 35 40 50 60 70 15 20 25 30 35 40 50

6 8 10 12 14 16 20 24 28 6 8 10 12 14 16 20

27 36 45 53 63 72 90 108 126 27 36 45 53 63 72 90

M6 M8 M10 M12 M16 M20 M24 M30 M36 1/4" 5/16" 3/8" 1/2"UNC 5/8" 3/4" 1"

(1)

B.L. (kgs)

1,500 600 400 200 100 75 50 20 10 1,500 400 600 200 100 75 40

1,300 2,200 2,600 4,900 7,000 10,000 18,000 22,000 34,000 1,300 2,200 2,600 4,900 7,000 10,000 18,000

C

L

D

88

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

M

S3061 Lifting eye nut - SUS type item no.

S3061 Technical Data Casting material

: AISI304 - DIN 1.4308 AISI316 - DIN 1.4408 Production : S3061 - Nut - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Lifting eye nuts - SUS type are designed for screw into all types of threaded rods, specially designed for lifting of objects.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 15 load characteristics

Material

S3061 SS304

4306-1006 4306-1008 4306-1010 4306-1012 4306-1016 4306-1020 4306-1220 4306-1030 4306-1104 4306-1516 4306-1308 4306-1102 4306-1508 4306-1304 4306-1101

SS316

SIZE (mm/inch)

6 6306-1006 8 6306-1008 10 6306-1010 12 6306-1012 16 6306-1016 20 6306-1020 22 6306-1220 30 6306-1030 1/4" 6306-1104 6306-1516 5/16" UNC 6306-1308 3/8" UNC 1/2" 6306-1102 6306-1508 5/8" UNC 6306-1304 3/4" UNC 1" 6306-1101

ØC (mm)

ØD (mm)

L (mm)

M (thread)

16 20 25 30 35 40 46 60 16 20 25 30 35 40 50

5.0 6.2 8.0 10.0 12.5 16.0 19.0 25.0 5.0 6.2 8.0 10.0 12.5 16.0 20.0

31.0 39.3 48.0 61.0 72.0 86.0 107.0 135.0 31.0 39.3 48.0 61.0 72.0 86.0 111.0

M6 M8 M10 M12 M16 M20 M22 M30 1/4" 5/16"UNC 3/8"UNC 1/2" 5/8"UNC 3/4”UNC 1"

(1)

B.L. (kgs)

1,500 1,000 500 250 125 50 40 20 1,500 1,000 500 200 125 75 30

1,100 1,300 2,600 3,500 8,000 10,500 11,000 20,000 1,200 1,300 2,600 3,500 8,000 10,500 14,450

Lifting eye nut - SUS type

Piece per carton.

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts C

L

M D S80704 Rectangular eye nut

S80704 Technical Data

item no. Material

Casting material : AISI316 - DIN 1.4408 Production : S80704 - Nut - Cast Surface treatment : "E.P. " (Electro polished)

Field of application

S80704 SS316

SIZE (mm)

(mm)

C

ØD (mm)

L (mm)

M (thread)

6807-0408 6807-0410 6807-0412

8 10 12

32 42 48

6.5 8.0 10.0

36.5 45.0 52.0

M8 M10 M12

(1)

B.L. (kgs)

600 400 200

2,200 3,600 4,300

Rectangular eye nuts are designed for screw into all types of threaded rods, specially designed for lifting of objects with knitting of leather or synthetic strap.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 16 load characteristics

D

L M

C

Field of application Eye bolts - AISI type are designed for screw into all types of panels for different applications. Threaded rod are TIG Argon welded to the casting eye.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 15 load characteristics

Material

S580 SS316

SIZE (mm/inch)

ØC (mm)

ØD (mm)

L (mm)

M (thread)

6580-0006 6580-0008 6580-0010 6580-0012 6580-0016 6580-0020 6580-0024 6580-0030 6580-0104 6580-0516 6580-0308 6580-0102 6580-0508 6580-0001

6 8 10 12 16 20 24 30 1/4" 5/16" 3/8" 1/2" 5/8" 1"

15 20 25 30 35 40 50 60 15 20 25 30 35 40

6 8 10 12 14 16 20 24 6 8 10 12 14 20

37 49 62 74 90 102 126 153 37 49 62 74 90 126

M6 M8 M10 M12 M16 M20 M24 M30 1/4" 5/16" 3/8" 1/2" 5/8" 1"

(1)

B.L. (kgs)

1,200 500 300 150 100 70 30 15 1,200 500 300 150 100 30

1,300 2,000 2,600 4,900 7,000 10,000 15,000 20,000 1,300 2,000 2,600 4,900 7,000 15,000

Eye bolt - AISI type

Piece per carton.

* For more information on symbols, refer to page 17.

89

SERIES

Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 Production : S580 - Thread- Forged Bolt - Cast Surface treatment : "E.P. " (Electro polished)

item no.

BASIC

S580 Technical Data

© Copyright 2010 by Strudyna Thailand

S580 Eye bolt - AISI type


U-bolts & Eye bolts D C

C

M L

L

S306 Special Eye bolt - SUS type

S306 Standard Eye bolt - SUS type

S306 (Standard) Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S306 (Standard) - Thread - Forged Bolt - Cast Surface treatment : "E.P. " (Electro polished)

item no.

Field of application Eye bolts - SUS type are longer and slender base than that of a standard bolt. Threaded rod are TIG Argon welded to the casting eye.

SS316

SIZE (mm/inch)

ØC (mm)

ØD (mm)

L (mm)

M (thread)

4306-0006 4306-0008 4306-0010 4306-0012 4306-0016 4306-0020 4306-0024 4306-0104 4306-0516 4306-0308 4306-0102 4306-0508 4306-0304 4306-0100

6306-0006 6306-0008 6306-0010 6306-0012 6306-0016 6306-0020 6306-0024 6306-0104 6306-0516 6306-0308 6306-0102 6306-0508 6306-0304 6306-0100

6 8 10 12 16 20 24 1/4'' 5/16" 3/8" 1/2" 5/8" 3/4" 1"

16.0 20.0 24.5 30.0 35.0 39.5 50.0 16.0 20.0 24.5 30.0 35.0 39.5 50.0

5.0 6.2 8.0 10.0 12.5 15.5 20.0 5.0 6.2 8.0 10.0 12.5 15.5 20.0

13.0 14.0 18.0 21.5 26.5 29.5 36.0 13.0 14.0 18.0 21.5 26.5 29.5 35.0

M6 M8 M10 M12 M16 M20 M24 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"

ØC (mm)

ØD (mm)

L (mm)

M (thread)

16 16 20 25 30 35 35 40 40 40 46 50 50 16 20 25 25 30 30 35 35 40 40 46 50

5.0 5.0 6.2 8.0 10.0 12.5 12.5 16.0 16.0 16.0 19.0 20.0 20.0 5.0 6.2 8.0 8.0 10.0 10.0 12.5 12.5 16.0 16.0 19.0 20.0

38 50 50 50 50 50 150 50 80 150 150 50 150 2" 2" 2" 6" 2" 6" 2" 6" 6" 2" 6" 6"

M6 M6 M8 M10 M12 M16 M16 M20 M20 M20 M22 M24 M24 1/4" 5/16" 3/8" 3/8" 1/2" 1/2" 5/8" 5/8" 3/4" 3/4" 7/8" 1"

item no.

S306 (Special) Technical Data Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S306 (Special) - Thread - Forged Bolt - Cast Surface treatment : "E.P. " (Electro polished)

90

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Field of application Eye bolts - SUS type are longer and slender base than that of a standard bolt. Threaded rod are TIG Argon welded to the casting eye.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

Eye bolts - SUS type

Piece per carton.

Material

S306 (Standard) SS304

Material

S306 (Special) SS304

4306-0638 4306-0650 4306-0850 4306-1050 4306-1250 4306-1650 4306-1615 4306-2050 4306-2080 4306-2015 4306-2215 4306-2450 4306 4306-2415 4306 4306-4122 4306 4306-5162 4306 4306-8032 4306 4306-3806 4306 4306-2012 4306 4306-2106 4306 4306-5802 4306 4306-8506 4306 4306-4306 4306 4306-3042 4306 4306-8706 4306 4306-0106 4306

SS316

SIZE (mm/inch)

6306-0638 06*38 6306-0650 06*50 6306-0850 08*50 6306-1050 10*50 6306-1250 12*50 6306-1650 16*50 6306-1615 16*150 6306-2050 20*50 6306-2080 20*80 6306-2015 20*150 6306-2215 22*150 6306-2450 24*50 6306-2415 24*150 6306-4122 1/4"*2" 6306-5162 5/16"*2" 6306-3082 3/8"*2" 6306-3806 3/8"*6" 6306-2012 1/2"*2" 6306-2106 1/2"*6" 6306-5802 5/8"*2" 6306-8506 5/8"*6" 6306-4306 3/4"*6" 6306-3042 3/4"*2" 6306-8706 7/8"*6" 6306-0106 1"*6"

(1)

B.L. (kgs)

1,500 800 500 200 150 70 30 1,500 750 400 200 125 70 30

1,100 1,800 2,600 3,500 8,000 10,500 14,550 1,100 1,800 2,600 3,400 8,000 10,500 13,000

(1)

B.L. (kgs)

n/a 1,000 500 250 150 100 60 50 50 30 n/a 30 n/a 1,000 500 200 170 150 100 100 60 45 50 20 15

1,100 1,100 1,800 2,600 3,500 8,000 8,000 10,500 10,500 10,500 12,500 14,550 14,550 1,100 1,800 2,600 2,600 3,400 3,400 8,000 8,000 10,500 10,500 12,500 13,000

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts C D

L

S307 Lifting eye bolt (with washer and nut)

Casting material

: AISI304 - DIN 1.4308/ AISI316 - DIN 1.4408 Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : S307 - Thread - Forged Bolt - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Lifting eye bolt (with washer and nut) for better gripping during assembly. Threaded rod are TIG Argon welded to the casting eye.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

Refer to page IV - class 8 load characteristics

Piece per carton.

S307 SS304

4307-0640 4307-0660 4307-0680 4307-0610 4307-0828 4307-0838 4307-0860 4307-0864 4307-0880 4307-0810 4307-0812 4307-1005 4307-1080 4307-1010 4307-1012 4307-1014 4307-1016 4307-1020 4307-1210 4307-1212 4307-1214 4307-2100 4307-1216 4307-1217 4307-1218 4307-1220 4307-1675 4307-1610 4307-1615 4307-4140 4307-4150 4307-4160 4307-4180 4307-4011 4307-5660 4307-5680 4307-5610 4307-5012 4307-8345 4307-8380 4307-8310 4307-8312 4307-8313 4307-8314 4307-2145 4307-2150 4307-2166 4307-2180 4307-2110 4307-2112 4307-2114 4307-2115 4307-1270 4307-1222 4307-2015 4307-2415

SS316

SIZE (mm/inch)

6307-0640 06040 6307-0660 06060 6307-0680 06080 6307-0610 06100 6307-0828 08028 6307-0838 08038 6307-0860 08060 6307-0864 08064 6307-0880 08080 6307-0810 08100 6307-0812 08120 6307-1005 10050 6307-1080 10080 6307-1010 10100 6307-1012 10120 6307-1014 10140 6307-1016 10160 6307-1020 10200 6307-1210 12100 6307-1212 12120 6307-1214 12140 6307-2100 12150 6307-1216 12160 6307-1217 12165 6307-1218 12180 6307-1220 12200 6307-1675 16075 6307-1670 16100 6307-1615 16150 6307-4140 1/4"*40 6307-4150 1/4"*50 6307-4160 1/4"*60 6307-4180 1/4"*80 6307-4011 1/4"*100 6307-5660 5/16"*60 6307-5680 5/16"*80 6307-5610 5/16"*100 6307-5012 5/16"*120 6307-8345 3/8"*45 6307-8380 3/8"*80 6307-8310 3/8"*100 6307-8312 3/8"*120 6307-8313 3/8"*125 6307-8314 3/8"*140 6307-1245 1/2"*45 6307-2166 1/2"'*50 6307-2165 1/2"*60 6307-2180 1/2"*80 6307-2110 1/2"*100 6307-2112 1/2"*120 6307-2114 1/2"*140 6307-2115 1/2"*150 6307-1270 12170 6307-1222 12220 6307-2015 20150 6307-2415 24150

ØC (mm)

ØD (mm)

L (mm)

16 16 16 16 20 20 20 20 20 20 20 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 35 35 35 16 16 16 16 16 20 20 20 20 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 40 50

5.0 5.0 5.0 5.0 6.2 6.2 6.2 6.2 6.2 6.2 6.2 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.5 12.5 12.5 5.0 5.0 5.0 5.0 5.0 6.2 6.2 6.2 6.2 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 16.0 20.0

40 60 80 100 28 38 60 64 80 100 120 50 80 100 120 140 160 200 100 120 140 150 160 165 180 200 75 100 150 40 50 60 80 100 60 80 100 120 45 80 100 120 125 140 45 50 60 80 100 120 140 150 170 220 150 150

(1)

B.L. (kgs)

1,000 800 600 600 500 400 350 300 350 250 300 250 200 150 150 175 150 125 100 100 75 70 80 80 70 60 75 80 70 800 700 600 600 600 500 400 250 300 250 200 175 150 150 125 150 120 120 100 100 100 75 75 75 50 35 25

1,100 1,100 1,100 1,100 1,300 1,300 1,300 1,300 1,300 1,300 1,300 2,600 2,600 2,600 2,600 2,600 2,600 2,600 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 8,000 8,000 8,000 1,100 1,100 1,100 1,100 1,100 1,300 1,300 1,300 1,300 2,600 2,600 2,600 2,600 2,600 2,600 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 10,500 14,550

* For more information on symbols, refer to page 17.

© Copyright 2010 by Strudyna Thailand

Material

91

SERIES

item no.

BASIC

S307 Technical Data


U-bolts & Eye bolts C

D M

L

SF3191 Eye bolt (with double washer and nut)

SF3191 Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF3191 - Bolt - Welded Surface treatment : "E.P. " (Electro polished)

Field of application Eye bolts (with double washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

92

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Refer to page IV - class 8 load characteristics

Piece per carton.

item no. Material

SF3191 SS304

4319-1550 4319-1640 4319-1655 4319-1660 4319-1680 4319-1610 4319-6125 4319-1616 4319-1835 431 4319-1860 431 4319-1880 431 4319-1810 431 4319-1811 431 4319-1812 431 4319-1888 431 4319-1813 431 4319-1815 431 4319-1150 431 4319-1106 431 4319-1107 431 4319-1101 431 4319-1102 431 4319-1103 431 4319-1114 431 4319-1104 431 4319-1112 431 4319-1126 431 4319-1121 4319-1122 4319-1123 4319-1124 4319-2185 4319-1165 4319-1416 4319-1511 4319-1831 4319-1832 4319-1381 4319-1214 4319-1212

SS316

SIZE (mm/inch)

6319-1550 5*50 6319-1640 6*40 6319-1655 6*55 6319-1660 6*60 6319-1680 6*80 6319-1610 6*100 6319-6125 6*125 6319-1616 6*160 6319-1835 8*35 6319-1860 8*60 6319-1880 8*80 6319-1810 8*100 6319-1811 8*110 6319-1812 8*120 6319-1888 8*125 6319-1813 8*130 6319-1815 8*150 6319-1150 10*50 6319-1106 10*60 6319-1107 10*80 6319-1101 10*100 6319-1102 10*120 6319-1103 10*130 6319-1114 10*140 6319-1104 10*150 6319-1112 10*200 6319-1126 12*80 6319-1121 12*100 6319-1122 12*120 6319-1123 12*140 6319-1124 12*150 6319-1185 12*185 6319-1615 16*150 6319-1416 1/4"*60 6319-1511 5/16"*100 6319-1831 3/8"*3-1/8" 6319-1832 3/8"*3-3/16" 6319-1381 3/8"*100 6319-1214 1/2"*4" 6319-1212 1/2"*120

ØC (mm)

ØD (mm)

L (mm)

M (thread)

11 13 13 13 13 13 13 13 17 17 17 17 17 17 17 17 17 21 21 21 21 21 21 21 21 21 25 25 25 25 25 25 18 13 17 21 21 21 25 25

4.40 5.25 5.25 5.25 5.25 5.25 5.25 5.25 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 8.80 8.80 8.80 8.80 8.80 8.80 8.80 8.80 8.80 10.70 10.70 10.70 10.70 10.70 10.70 14.45 5.40 6.94 8.40 8.40 8.40 11.24 11.24

50 40 55 60 80 100 125 160 35 60 80 100 110 120 125 130 150 50 60 80 100 120 130 140 150 200 80 100 120 140 150 185 150 60 100 80 81 100 101 120

M5 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M16 1/4" 5/16" 3/8" 3/8" 3/8" 1/2" 1/2"

(1)

B.L. (kgs)

1,500 1,000 800 1,000 600 700 500 400 800 500 500 250 300 350 250 250 250 250 200 250 250 200 150 200 200 150 100 125 100 125 100 100 75 1,000 250 250 250 250 100 100

600 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 2,400 2,400 2,400 2,400 2,400 2,400 2,400 2,400 2,400 3,500 3,500 3,500 3,500 3,500 3,500 7,500 1,000 1,800 2,400 2,400 2,400 3,500 3,500

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts C C1

L

L1

SF3182 Eye bolt (wooden screw) item no.

SF3182

Technical Data Forging material : AISI316 - DIN 1.4401 Production : SF3182 - Bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application

F F F F F F F F F F F F F F F F F F F

SS316

SIZE (mm/inch)

ØC (mm)

Ø C1 (mm)

L (mm)

L1 (MM)

2318-2445 2318-2555 2318-2560 2318-2640 2318-2645 2318-2650 2318-2655 2318-2660 2318-2680 2318-2860 2318-2875 2318-2880 2318-2810 2318-2175 2318-2180 2318-2110 2318-2112 2318-2127 2318-2122

4*45 5*55 5*60 6*40 6*45 6*50 6*55 6*60 6*80 8*60 8*75 8*80 8*100 10*75 10*80 10*100 10*120 12*100 12*120

4.2 5.2 5.2 6.2 6.2 6.2 6.2 6.2 6.2 8.2 8.2 8.2 8.2 10.3 10.3 10.3 10.3 12.3 12.3

7.3 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 18.0 18.0 18.0 18.0 20.0 20.0 20.0 20.0 24.5 24.5

45 55 60 40 45 50 55 60 80 60 75 80 100 75 80 100 120 100 120

30 40 50 28 30 33 36 40 55 40 50 55 65 50 55 65 80 65 80

5,000 n/a n/a 1,500 n/a n/a 1,300 1,700 1,000 1,000 800 500 n/a n/a 500 350 n/a 300 250

BASIC

© Copyright 2010 by Strudyna Thailand

Eye bolts (wooden screw) are designed for screw into wooden panels for lifting purposes.

SF3182

Material

Piece per carton.

F

Upset Forging

* For more information on symbols, refer to page 17.

93

SERIES

Pliers


U-bolts & Eye bolts C

L D

L1

S3291 Eye wooden screw Pliers

S3291

Technical Data Casting material : AISI316 - DIN 1.4408 Production : S3291 - Screw - Cast Surface treatment : "E.P. " (Electro polished)

Field of application

Material

S3291 SS316

SIZE (mm)

ØC (mm)

ØD (mm)

L (mm)

L1 (mm)

6329-1550 6329-1560 6329-1640 6329-1660 6329-1680 6329-1610 6329-1860 6329-1880 6329-1810 6329-1812 6329-1160 6329-1180 6329-1110 6329-1112 6329-1280 6329-1210 6329-1212 6329-1214 6329-1216

5*50 5*60 6*40 6*60 6*80 6*100 8*60 8*80 8*100 8*120 10*60 10*80 10*100 10*120 12*80 12*100 12*120 12*140 12*160

11 11 14 14 14 14 18 18 18 18 22 22 22 22 27 27 27 27 27

5 5 6 6 6 6 8 8 8 8 10 10 10 10 12 12 12 12 12

50 60 40 60 80 100 60 80 100 120 60 80 100 120 80 100 120 140 160

30 36 24 36 48 60 36 48 60 72 36 48 60 72 48 60 72 84 96

1,000 1,000 1,000 700 800 600 500 350 300 300 250 200 200 200 150 125 100 100 85

94

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Eye wooden screws are designed for screw into wooden panels for lifting purposes. The large eye profile allows easy gripping.

item no.

Piece per carton.

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts C

C1

L T L1

M

DIN444, SFDIN444 Eye bolt

Material

Casting material Production

: AISI316 - DIN 1.4408 : DIN444 - Bolt - Cast SFDIN444 - Bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application

item no.

Eye bolts are designed for screw into internal thread holes for lifting purposes.

Material

Piece per carton.

DIN444

SIZE (mm/inch)

ØC (mm)

Ø C1 (mm)

L (mm)

L1 (mm)

M

T

SS316

(thread)

(mm)

6444-1011 6444-1012 6444-3812

10*110 10*120 3/8"*120

10.1 10.1 10.1

20 20 20

110 120 120

65 73 73

M10 M10 3/8"

12 12 12

SIZE (mm)

ØC (mm)

Ø C1 (mm)

L (mm)

L1 (mm)

M

T

SS316

(thread)

(mm)

2444-0530 2444-0540 2444-0550 2444-0560 2444-0525 2444-0635 2444-0640 2444-0645 2444-0650 2444-0660 2444-0670 2444-0675 2444-0680 2444-0825 2444-0830 2444-0835 2444-8404 2444-0845 2444-0850 2444-0860 2444-0865 2444-0870 2444-0875 2444-0880 2444-0810 2444-8120 2444-1040 2444-1045 2444-1050 2444-1060 2444-1065 2444-1070 2444-1075 2444-1080 2444-1090 2444-1010 2444-1250 2444-1255 2444-1260 2444-1265 2444-1270 2444-1275 2444-1280 2444-1290 2444-1210 2444-1211 2444-1212 2444-1213 2444-1214 2444-1215 2444-1217

5*30 5*40 5*50 5*60 6*25 6*35 6*40 6*45 6*50 6*60 6*70 6*75 6*80 8*25 8*30 8*35 8*40 8*45 8*50 8*60 8*65 8*70 8*75 8*80 8*100 8*120 10*40 10*45 10*50 10*60 10*65 10*70 10*75 10*80 10*90 10*100 12*50 12*55 12*60 12*65 12*70 12*75 12*80 12*90 12*100 12*110 12*120 12*130 12*140 12*150 12*160

5.2 5.2 5.2 5.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2 12.2

12 12 12 12 14 14 14 14 14 14 14 14 14 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

30 40 50 60 25 35 40 45 50 60 70 75 80 25 30 35 40 45 50 60 65 70 75 80 100 120 40 45 50 60 65 70 75 80 90 100 50 55 60 65 70 75 80 90 100 110 120 130 140 150 160

20 22 30 36 15 18 22 25 30 36 42 46 50 15 15 18 22 25 28 34 38 40 45 48 60 73 20 23 29 32 35 40 43 46 53 60 25 28 32 35 38 42 45 50 58 65 72 78 85 92 95

M5 M5 M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12

6 6 6 6 7 7 7 7 7 7 7 7 7 9 9 9 9 9 9 9 9 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

SFDIN444

300 350 350

4,000 4,000 4,000 2,500 2,500 3,000 2,000 1,800 1,700 1,500 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,200 1,000 1,000 800 700 800 800 600 300 900 800 750 600 600 600 550 500 450 400 400 400 400 400 n/a 300 250 250 250 250 180 200 200 150 150

* For more information on symbols, refer to page 17.

© Copyright 2010 by Strudyna Thailand

Technical Data

95

SERIES

item no.

BASIC

DIN444, SFDIN444


U-bolts & Eye bolts C

C1

L T

SFDIN444 Eye bolt

item no.

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

Material

96

Piece per carton.

L1

M

(Continue from previous page)

SFDIN444

SIZE (mm/inch)

ØC (mm)

Ø C1 (mm)

L (mm)

L1 (mm)

M

T

SS316

(thread)

(mm)

2444-1660 2444-1670 2444-1680 2444-1690 2444-1610 2444-1611 2444-1612 2444-1613 2444-1614 2444-1615 2444-1616 2444-2070 2444-2075 2444-2080 2444-2090 2444-2010 2444-2011 2444-2012 2444-2013 2444-2014 2444-2015 2444-2016 2444-2018 2444-2020 2444-2480 2444-2490 2444-2410 2444-2411 2444-2412 2444-2413 2444-2414 2444-2415 2444-2416 2444-4180 2444-2420 2444-5640 2444-5660 2444-5680 2444-5610 2444-5620 2444-3840 2444-3860 2444-3880 2444-8390 2444-3810 2444-2161 2444-2181 2444-2110 2444-2112 2444-2114 6444-5860 2444-5880 2444-5810 2444-5812 2444-5814 2444-3460 2444-3480 2444-3410 2444-3412 2444-3414

16*60 16*70 16*80 16*90 16*100 16*110 16*120 16*130 16*140 16*150 16*160 20*70 20*75 20*80 20*90 20*100 20*110 20*120 20*130 20*140 20*150 20*160 20*180 20*200 24*80 24*90 24*100 24*110 24*120 24*130 24*140 24*150 24*160 24*180 24*200 5/16"*40 5/16"*60 5/16"*80 5/16"*100 5/16"*120 3/8''*40 3/8"*60 3/8"*80 3/8"*90 3/8"*100 1/2"*60 1/2"*80 1/2"*100 1/2"*120 1/2"*140 5/8"*60 5/8''*80 5/8"*100 5/8"*120 5/8''*140 3/4"*60 3/4"*80 3/4"*100 3/4"*120 3/4"*140

16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 18.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 8.2 8.2 8.2 8.2 8.2 10.2 10.2 10.2 10.2 10.2 12.2 12.2 12.2 12.2 12.2 16.2 16.2 16.2 16.2 16.2 18.2 18.2 18.2 18.2 18.2

32 32 32 32 32 32 32 32 32 32 32 40 40 40 40 40 40 40 40 40 40 40 40 40 45 45 45 45 45 45 45 45 45 45 45 18 18 18 18 18 20 20 20 20 20 25 25 25 25 25 32 32 32 32 32 40 40 40 40 40

60 70 80 90 100 110 120 130 140 150 160 70 75 80 90 100 110 120 130 140 150 160 180 200 80 90 100 110 120 130 140 150 160 180 200 40 60 80 100 120 40 60 80 90 100 60 80 100 120 140 60 80 100 120 140 60 80 100 120 140

30 35 42 49 56 62 70 75 82 90 96 30 35 40 42 53 60 66 76 80 86 93 106 120 38 42 50 54 65 70 80 85 90 105 118 22 34 48 60 73 20 32 46 53 60 32 45 58 72 85 30 42 56 70 82 26 40 53 66 80

M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M20 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 M24 5/16" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4"

17 17 17 17 17 17 17 17 17 17 17 22 22 22 22 22 22 22 22 22 22 22 22 22 26 26 26 26 26 26 26 26 26 26 26 9 9 9 9 9 12 12 12 12 12 14 14 14 14 14 17 17 17 17 17 22 22 22 22 22

150 150 150 150 150 130 125 100 100 80 100 120 120 120 100 100 80 80 70 70 60 60 60 50 60 60 60 55 50 50 50 50 50 40 40 1,400 900 800 600 500 900 650 500 n/a 400 375 300 250 200 200 250 175 135 125 125 125 100 100 75 70

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts C

C1

L M

L1

SFDIN444FT Eye bolt (full thread)

Technical Data Casting material Forging material Production Surface treatment

: : : :

AISI316 - DIN 1.4408 AISI316 - DIN 1.4401 SFDIN444FT- Bolt - Forged "E.P. " (Electro polished)

Field of application

F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F

SFDIN444FT

M

SS316

SIZE (mm)

ØC (mm)

Ø C1 (mm)

L (mm)

L1 (mm)

(thread)

2444-2530 2444-2540 2444-2550 2444-2560 2444-2612 2444-0625 2444-2635 2444-2640 2444-2645 2444-2650 2444-2660 2444-2670 2444-2675 2444-2680 2444-2830 2444-2835 2444-2840 2444-2850 2444-2860 2444-2865 2444-2870 2444-2875 2444-2880 2444-2810 2444-2812 2444-2140 2444-2145 2444-2150 2444-2160 2444-2170 2444-2175 2444-2180 2444-2190 2444-2100 2444-2111 2444-2120 2444 2120 2444-2250

5*30 5*40 5*50 5*60 6*19 6*25 6*35 6*40 6*45 6*50 6*60 6*70 6*75 6*80 8*30 8*35 8*40 8*50 8*60 8*65 8*70 8*75 8*80 8*100 8*120 10*40 10*45 10*50 10*60 10*70 10*75 10*80 10*90 10*100 10*110 10 120 10*120 12*50

5.2 5.2 5.2 5.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 12.2

12 12 12 12 14 14 14 14 14 14 14 14 14 14 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 20 20 20 20 20 20 25

30 40 50 60 19 25 35 40 45 50 60 70 75 80 30 35 40 50 60 65 70 75 80 100 120 40 45 50 60 70 75 80 90 100 110 120 50

22 32 42 52 10 15 25 30 35 40 50 60 65 70 20 25 30 40 50 55 60 65 70 90 110 30 35 40 50 60 65 70 80 90 100 110 35

M5 M5 M5 M5 M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M12

n/a n/a n/a n/a 4,000 3,000 n/a n/a n/a n/a 1,500 2,000 n/a n/a n/a n/a 1,000 900 n/a n/a n/a n/a 700 500 n/a n/a n/a 750 n/a n/a n/a n/a n/a n/a n/a n/a n/a

BASIC

Eye bolts (full thread) are heavy duty forging eye bolts designed with longer thread lenght for heavy load liftings.

Material

© Copyright 2010 by Strudyna Thailand

SFDIN444FT

Piece per carton.

F

Upset Forging

* For more information on symbols, refer to page 17.

97

SERIES

item no.


U-bolts & Eye bolts T

H

M DIN 315 Wing nut item no.

DIN315

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Production : DIN315 - Nut - Cast Surface treatment : "E.P. E.P. " (Electro polished)

Field of application Wing nuts are designed for screw onto external thread rods for tightening of a surface panels.

DIN315

SIZE (mm/inch)

H

M

T

SS316

(mm)

(thread)

(mm)

6331-5004 6331-5005 6331-5006 6331-5008 6331-5010 6331-5012 6331-5016 6331-5020 6331-5024 6331-5316 6331-5104 6331-5516 6331-5308 6331-5102 6331-5508 6331-5304 6331-5001

M4 M5 M6 M8 M10 M12 M16 M20 M24 3/16'' 1/4'' 5/16'' 3/8'' 1/2'' 5/8'' 3/4'' 1''

9.5 12.0 16.0 20.0 25.0 32.0 36.0 45.0 56.0 12.0 16.0 20.0 25.0 32.0 36.0 45.0 56.0

M4 M5 M6 M8 M10 M12 M16 M20 M24 3/16" 1/4'' 5/16'' 3/8'' 1/2" 5/8'' 3/4'' 1''

4 6 8 10 12 14 16 20 24 6 8 10 12 14 16 20 24

2,500 5,000 3,000 1,500 800 400 300 120 70 5,000 3000 1500 800 400 300 120 70

T H

SERIES

BASIC 98

M

Š Copyright 2010 by Strudyna Thailand

L

DIN 316 Wing bolt

DIN316 Technical Data Casting material Forging material Production Surface treatment

: : : :

AISI316 - DIN 1.4408 AISI316 - DIN 1.4401 DIN316 - Thread - Forged "E.P. " (Electro polished)

Field of application Wing bolts are designed for screw into internal thread holes for tightening of a surface panels.

item no. Material

DIN316

SIZE (mm/inch)

H

L

M

T

SS316

(mm)

(mm)

(thread)

(mm)

6316-0210 6316-0515 6316-0520 6316-0525 6316-0530 6316-0535 6316-0616 6316-0620

5*10 5*15 5*20 5*25 5*30 5*35 6*16 6*20

12 12 12 12 12 12 16 16

10 15 20 25 30 35 16 20

M5 M5 M5 M5 M5 M5 M6 M6

6 6 6 6 6 6 8 8

3,200 3,000 2,500 2,500 3,000 2,000 2,000 2,000

(Continue to next page)

Piece per carton.

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts item no. Material

DIN 316 (Continue from previous page)

DIN316

SIZE (mm/inch)

H

L

M

T

SS316

(mm)

(mm)

(thread)

(mm)

6316-0625 6316-0630 6316-0635 6316-0640 6316-0650 6316-0816 6316-0820 6316-0825 6316-0830 6316-0840 6316-0850 6316-1020 6316-1025 6316-1030 6316-1040 6316-1050 6316-1060 6316-1080 6316-1220 6316-1224 6316-1235 6316-1240 6316-1250 6316-1280 6316-1625 6316-1630 6316-1660 6316-2030 6316-2080 6316-2495 6316-2150 6316-5860 6316-3480

6*25 6*30 6*35 6*40 6*50 8*16 8*20 8*25 8*30 8*40 8*50 10*20 10*25 10*30 10*40 10*50 10*60 10*80 12*20 12*24 12*35 12*40 12*50 12*80 16*25 16*30 16*60 20*30 20*80 24*95 1/2"*50 5/8"*60 3/4"*80

16 16 16 16 16 20 20 20 20 20 20 25 25 25 25 25 25 25 32 32 32 32 32 32 36 36 36 45 45 56 32 36 45

25 30 35 40 50 16 20 25 30 40 50 20 25 30 40 50 60 80 20 24 35 40 50 80 25 30 60 30 80 95 50 60 80

M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 M8 M10 M10 M10 M10 M10 M10 M10 M12 M12 M12 M12 M12 M12 M16 M16 M16 M20 M20 M24 1/2" 5/8" 3/4"

8 8 8 8 8 10 10 10 10 10 10 12 12 12 12 12 12 12 14 14 14 14 14 14 16 16 16 20 20 24 14 16 20

2,000 1,500 1,500 1,200 1,000 950 900 850 900 800 600 600 500 400 400 400 300 300 300 300 300 250 200 150 200 200 120 100 60 30 200 120 60

L1

T

L

S80701, S31501

Material

Technical Data Casting material Production

: AISI316 - DIN 1.4408 : S80701 - Nut - Cast S31501 - Nut - Cast Surface treatment : "E.P. " (Electro polished)

Field of application Wide wing nuts - long type and Wing nuts - long type are specifically designed for screw onto an external threaded rod for tightening of a surface panel. The wing profile allows easy griping with a one hand motion. The long wing profile allows easy griping with a two hand motion.

Piece per carton.

item no. Material

S80701

SIZE (mm)

L

L1

M

T

SS316

(mm)

(mm)

(thread)

(mm)

6807-0116 6807-0120 6807-0124

M16 M20 M24

240 240 240

40 40 40

M16 M20 M24

30 30 30

SIZE (mm)

L

L1

M

T

SS316

(mm)

(mm)

(thread)

(mm)

6305-0108 6305-0110 6305-0112 6305-0116 6305-0120 6305-0122 6315-0124

M8 M10 M12 M16 M20 M22 M24

51 64 74 86 108 122 134

16 20 23 28 36 40 45

M8 M10 M12 M16 M20 M22 M24

9.5 12.0 14.0 16.0 20.0 22.0 24.0

S31501

50 50 50

700 600 400 300 150 100 50

* For more information on symbols, refer to page 17.

BASIC

item no.

S31501 Wing nut - long type

99

SERIES

S80701 Wide wing nut - long type

Š Copyright 2010 by Strudyna Thailand

M


U-bolts & Eye bolts C C

L

1

M T

S4600 Long wing bolt (with washer and nut)

S4600 Technical Data Casting material : AISI316 - DIN 1.4408 Production : S4600 - Bolt - Cast Surface treatment : "E.P. " (Electro polished)

Field of application

Material

S4600

SIZE (mm)

C

C1

L

M

T

SS316

(mm)

(mm)

(mm)

(thread)

(mm)

6460-0850 6460-0860 6460-0875 6460-0810 6460-1060 6460-0108 6460-0101 6460-0112 6460-1280 6460-0121 6460-0125 6460-1216 6460-1610 6460-1612 6460-0161 6460-0166 6460-0162 6460-2012 6460-0201 6460-0216 6460-0202 6460-2214 6460-2220 6460-0241 6460-2416 6460-0242 6460-0245

8*50 8*60 8*75 8*100 10*60 10*80 10*100 10*120 12*80 12*100 12*150 12*160 16*100 16*120 16*150 16*160 16*200 20*120 20*150 20*160 20*200 22*140 22*200 24*100 24*160 24*200 24*250

8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 12.3 12.3 12.3 12.3 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 20.0 20.0 22.0 22.0 22.0 22.0

18 18 18 18 20 20 20 20 25 25 25 25 32 32 32 32 32 40 40 40 40 43 43 45 45 45 45

50 60 75 100 60 80 100 120 80 100 150 160 100 120 150 160 200 120 150 160 200 140 200 100 160 200 250

M8 M8 M8 M8 M10 M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M16 M16 M20 M20 M20 M20 M22 M22 M24 M24 M24 M24

9 9 9 9 12 12 12 12 14 14 14 14 17 17 17 17 17 22 22 22 22 23 23 25 25 25 25

500 500 450 400 400 200 200 200 150 125 100 100 100 80 75 70 50 50 30 30 30 30 25 30 25 25 20

SERIES

BASIC

Š Copyright 2010 by Strudyna Thailand

Long wing bolt (with washer and nut) are design for special purpose assembly where wing nut serves as a tightening devide to the eye bolt.

item no.

100

Piece per carton.

* For more information on symbols, refer to page 17.


U-bolts & Eye bolts B

D

L

L L1

M

D

B SF541, SF543, SF544, SF547, SF548, SF549 Long U-bolt (with washer and nut)

Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF413 - Bolt - Forged Surface treatment : "E.P. " (Electro polished)

Field of application U-bolts (with washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.

SF541,SF543, SF544 SF547, SF548, SF549

SIZE (mm)

B

D

L

L1

M

SS316

(mm)

(mm)

(mm)

(mm)

(thread)

4413-0460 4413-0580 4413-0690 4413-0880 4413-0810 4413-1090 4413-1013 4413-1215

6413-0460 6413-0580 6413-0690 6413-0880 6413-0810 6413-1090 6413-1013 6413-1215

4*60 5*80 6*90 8*80 8*100 10*90 10*130 12*150

30 35 35 35 35 50 50 60

4 5 6 7 7 10 10 12

62 78 90 80 100 90 130 150

30 40 45 40 50 40 55 65

M4 M5 M6 M8 M8 M10 M10 M12

item no. Material

Technical Data Forging material : AISI304 - DIN 1.4301/ AISI316 - DIN 1.4401 Production : SF541 - Bolt - Forged SF543 - Bolt - Forged SF544 - Bolt - Forged SF547 - Bolt - Forged SF548 - Bolt - Forged SF549 - Bolt - Forged Surface treatment : "E.P. " (Electro polished)

item no. Material

item no. Material

Field of application Long U-bolts (with washer and nut) are designed for assembly onto a flat panel and serve as a pulling ring.

item no. Material

item no. Material

item no.

SF541

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4541-1007

10*76

35

10

76

32

M8

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4543-1006

10*65

35

10

65

23

M8

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4544-1090

10*90

35

10

90

47

M8

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4547-1011

10*115

35

10

115

47

M8

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4548-1014

10*140

35

10

140

47

M8

SIZE (mm)

B

D

L

L1

M

SS304

(mm)

(mm)

(mm)

(mm)

(thread)

4549-1016

10*165

35

10

165

47

M8

SF543

SF544

SF547

SF548

SF549

750 600 200 200 200 100 100 60

180

200

150

100

100

100

BASIC

Material

SF413 SS304

Material

Š Copyright 2010 by Strudyna Thailand

item no.

SF413

Piece per carton.

* For more information on symbols, refer to page 17.

SERIES

SF413 U-bolt (with washer and nut)

101


Balustrades D

M

SAB/APL Architecture ball (right hand thread) item no.

SAB/APL

Material

Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "M.F." (Matte Finished)

Field of application Architecture balls are designed as a neat and aesthetic end stopper to all types of threaded end fittings. It is best used for interior decoration.

SAB/APL SS316

ØD (mm)

M (thread)

6125-1503 6125-2003 6126-2045 6128-2506

15 20 20 25

M5 M5 M6 M8

(1)

B.L. (kgs)

600 600 600 500

750 750 1,400 2,200

Note:(1) Standard safety factor for working load is 1/4 of breaking load.

D

Refer to page 85 - class 22 load characteristic

M

SAB/T/APL Architecture ball with through tapped hole (right hand thread) item no. Material

SAB/T/APL Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "M.F." (Matte Finished)

SAB/T/APL SS316

ØD (mm)

M (thread)

6125-1573 6125-2073 6126-2074 6128-2576

15 20 20 25

M5 M5 M6 M8

600 600 600 500

750 750 1,400 2,200

L1

Field of application

(1)

B.L. (kgs)

Architecture balls with through tapped hole are neat and aesthetic fasteners for all types of threaded end fittings. It is best used for interior decoration.

D

Note:(2) Standard safety factor for working load Refer to page 85 - class 22 load characteristic

102

D

class 22

D1

L SAH/APL Angled hinge item no. Material

SERIES

BASIC

© Copyright 2010 by Strudyna Thailand

is 1/4 of breaking load.

SAH/APL Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "M.F. " (Matte finished)

Field of application Angle hinges are designed to provide an accurate angle support for all types of threaded end fittings. It is best used for interior stair decorations.

Piece per carton.

SAH/APL SS316

6182-0115 6182-0136 6182-0178 6182-5115 6182-5136 6182-5178 6183-0115 6183-0136 6183-0178 6183-5115 6183-5136 6183-5178 6184-0115 6184-0136 6184-0178

ANGLE (D° ) 20 20 20 25 25 25 30 30 30 35 35 35 40 40 40

ØD (mm)

Ø D1 (mm)

L (mm)

L1 (mm)

5.0 6.0 8.2 5.0 6.0 8.2 5.0 6.0 8.2 5.0 6.0 8.2 5.0 6.0 8.2

11 13 17 11 13 17 11 13 17 11 13 17 11 13 17

9.0 9.7 11.2 10.0 11.0 12.9 11.3 12.5 14.8 12.7 14.0 16.9 14.2 15.9 19.3

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

4,000 3,000 2,500 4,000 3,000 2,500 4,000 3,000 2,000 3,000 3,000 2,000 3,000 3,000 1,800

* For more information on symbols, refer to page 17.


Balustrades D1

L

M D SF7806TR Inside threaded domehead (right hand thread)

SF7806TR Technical Data Forging material : AISI316 - DIN 1.4401 Surface treatment : "E.P." (Electro polished)

item no. Material

Field of application Inside threaded domehead are designed as a neat and aesthetic end stopper to all types of threaded end fittings. It is best used for balustrading.

Note:(1) Standard safety factor for working load

SF7806TR SS316

SIZE (mm)

ØD (mm)

Ø D1 (mm)

L (mm)

M (thread)

6780-6525 6780-6630 6780-6835

M5 M6 M8

7.13 8.00 11.00

10.0 11.5 14.0

40 45 55

M5 M6 M8

(1)

B.L. (kgs)

1,600 1,200 600

750 1,400 2,200

is 1/4 of breaking load.

Refer to page 86 - class 22 load characteristic class 22

M

L1 L

E

D

Material

Forging material : AISI316 - DIN 1.4401 Surface treatment : "M.F." (Matte finished)

Field of application Inside threaded terminals are designed as a neat and aesthetic connector between a cable and all types of external threaded end fittings. It is best used in combination with wooden screw for a clean profile to a wood surface.

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

Refer efer to page IV - class10 load characteristic

item no. Material

SF7801/IR SS316

ØD (mm)

E (mm)

L (mm)

L1 (mm)

6780-1382 6780-1383 6780-1384 6780-1385

5.50 6.35 7.50 9.00

25 25 30 40

65 65 70 85

20 20 20 25

SF7801/IL SS316

ØD (mm)

E (mm)

L (mm)

L1 (mm)

6780-1387 6780-1388 6780-1389 6780-1390

5.50 6.3 6.35 7.5 7.50 9.0 9.00

25 25 30 40

65 65 70 85

20 20 20 25

d domehead Inside threade

Piece per carton.

(2)

M DIA Ø CABLE (thread) (mm)

M5 M6 M6 M8

3 4 5 6

B.L. (kgs)

2,000 1,500 1,200 750

(2)

M DIA Ø CABLE (thread) (mm)

M5 M6 M6 M8

3 4 5 6

600 1,000 1,400 2,200 B.L. (kgs)

2,000 1,500 1,200 750

600 1,000 1,400 2,200

balustrades

* For more information on symbols, refer to page 17.

SERIES

Technical Data

item no.

BASIC

SF7801/IR, SF7801/IL

© Copyright 2010 by Strudyna Thailand

SF7801/IR Inside threaded terminal (right hand thread), SF7801/IL Inside threaded terminal (left hand thread)

103


Snap shackles & Pelican hooks o L

o

o

L

L B

B S2476 Snap shackle (stamped swivel jaw)

Swivel

item no.

S2476, S2478, S2482

S2476

Casting material Forging material Production

: AISI316 - DIN 1.4408 : AISI316 - DIN 1.4401 : S2476 - Shackle - Cast Swivel - Forged Pin - Forged : S2478, S2482 Shackle - Cast Swivel - Cast Pin - Forged Surface treatment : "E.P." (Electro polished)

SIZE

(mm)

L (mm)

O (mm)

6247-6112 6247-6216 6247-6324

1 2 3

13 15 22

62 77 117

14 20 27

B

SS316

SIZE

(mm)

L (mm)

O (mm)

6247-8170 6247-8288 6247-8313

1 2 3

13 13 22

70 87 127

14 20 27

item no.

S2478

Material

Field of application Snap shackles (stamped swivel jaw) and Snap shackle (cast swivel jaw) are designed for application where a simple light load version of a quick open/assembly pin is required. Snap shackles (cast swivel eye) are designed for applications where a free swivel action end is required.

B

SS316

Material

Technical Data

S2482 Snap shackle (cast swivel eye)

S2478 Snap shackle (cast swivel jaw)

item no.

S2482

B

SS316

SIZE

(mm)

L (mm)

O (mm)

6248-2001 6248-2021 6248-2304

1 2 3

12 16 22

67 87 126

14 20 27

Material

(2)

B.L. (kgs)

400 200 50

1,100 2,000 3,500 (2)

B.L. (kgs)

300 140 50

350 200 60

1,100 2,000 3,500 (2)

P B C

B.L. (kgs)

3 3 3

1,100 2,000 3,500

Snap shackle (stamped swivel jaw)

O

SERIES

BASIC

L

O

B

B

Š Copyright 2010 by Strudyna Thailand

L

S24821 Snap shackle head For Assembly

item no.

S24821, S2483

S24821

Casting material Forging material

: AISI316 - DIN 1.4408 : AISI316 - DIN 1.4401 : S24821, S2483 Shackle - Cast Pin - Forged Surface treatment : "E.P." (Electro polished)

SIZE

(mm)

L (mm)

O (mm)

6248-2101 6248-2124 6248-2134

1 2 3

10 12 15

42 54 76

14 20 27

item no.

Field of application

S2483

Note:(1) Standard safety factor for working load

B

SS316

SIZE

(mm)

L (mm)

O (mm)

6248-3000 6248-3001 6248-3322 6248-3333

0 1 2 3

6.5 16.0 21.0 21.0

32 56 70 102

9 12 19 25

Material

Snap shackle heads and Fixed snap shackles are designed for applications where a permanent non-swivel action end is required. Snap shackle head are designed for assembly with external parts such as ball bearing blocks.

B

SS316

Material

Technical Data

S2483 Fixed snap shackle (1)

B.L. (kgs)

500 300 80

1,000 500 250 100

1,100 2,000 3,500 (3)

P B C

B.L. (kgs)

1 3 3 n/a

400 1,100 2,000 3,500

is 1/4 of breaking load.

Refer to page IV - class 15 load characteristics

104

Piece per carton.

P B C

Plastic Back Card.

* For more information on symbols, refer to page 17.


Snap shackles & Pelican hooks O

L

B S2464/S2466/S2468 Snap shackle

S2464, S2466, S2468

item no. Material

Technical Data Casting material : AISI316 - DIN 1.4408 Forging material : AISI316 - DIN 1.4401 : S2464, S2466, S2468 Shackle - Cast Surface treatment : "E.P." (Electro polished)

item no. Material

Field of application Snap shackles are designed for marine application where a rope friendly end with a quick release lever is required.

item no. Material

Note:(2) Standard safety factor for working load is 1/4 of breaking load.

S2464

SIZE

B

SS316

(mm)

(mm)

L (mm)

O (mm)

6246-4052

52

12

52

10

S2466

SIZE

B

SS316

(mm)

(mm)

L (mm)

O (mm)

6246-6066

66

15

66

14

S2468

SIZE

B

SS316

(mm)

(mm)

L (mm)

O (mm)

6246-8096

96

25

96

18

500

250

80

(3)

P B C

B.L. (kgs)

2

830