floor construction
aquatherm orange system System element knob plate F ND 11 Characteristics The aquatherm orange system-system element knob plate F ND 11 is made of polystyrene high resistance foam with integrated pipe keeping knobs. The surface is refined with PS-foil and has overlays. The knobs are safe and keep the heating pipes implace. The element is equipped with 11 mm polystyrene high resistance foam EPS 200 at its underside. There is a choice of 14 x 2.0 mm or 16 x 2.0 mm for the heating pipes which can be placed. Special advantages
54
•
variable pipe distances in 50 mm grid.
•
Ideal for liquid screed due to folded joints on all sides and accessories.
•
Good heat efficiency due to complete pipe integration.
•
One-man-installation without problems.
•
Easy assembly without special tools.
Technical Data knob plate F ND 11
•
Exact placing of heating pipe - horizontal and vertical - conform to DIN EN 1264.
Thermal resistance: 0.314 m2 K/W
•
Applicable for all commercial high resistance foam insulations .
•
Diagonal laying is also possible.
•
On using “Lazenoflex-floor system” it is possible to achieve in smallest layer size a heated floor construction with pipes on the insulation (building type A1) in the field of reconstruction and renovation.
•
The construction height above the heating pipes is only about 10 mm (without covering)
•
Total construction height about 45 mm
•
Covering materials like tiles, bricks, terracotta, clinker pavement are suitable
System element knob plate F ND 11 Floor detail for heated rooms System element knob plate F ND 11
Insulation size: 11 mm Total size inclusive pipe holding knobs: 30 mm Max. working load: 60.0 kN / m2 Impact sound improvement size: without Art.-No. 91112 In combination with additional insulation material the requirements of EnEV can be met.